Synergistic enhancement of iodine capture from humid streams by microporosity and hydrophobicity of activated carbon fiber

Activated carbon fibers (ACF) are widely used to remove gaseous radioiodine produced during spent fuel reprocessing owing to their excellent adsorption properties. However, ACF's strong affinity for moisture tends to dominate, significantly reducing its ability to capture iodine in humid environments. The study used a one-step facile modification method of spray-deposited poly(divinylbenzene) (PDVB) nanoparticles on ACF to prepare hydrophobic activated carbon fiber (ACF-PDVB1.5). Compared to the initial ACF, the ACF-PDVB1.5 enhances the specific surface area to 1571 m2/g while maintaining abundant active sites, overcoming the disadvantage of pore reduction caused by traditional modification methods. More importantly, they also have excellent acid and alkali resistance and hydrophobicity (water contact angle 131.1°), with a preference for I2 pores (97 % microporosity). The iodine capture capacity of ACF PDVB 1.5 showed a significant increase compared to the initial ACF, as indicated by both static and dynamic adsorption tests. Notably, the dynamic iodine adsorption capacity of ACF-PDVB1.5 in a mixed iodine-water vapor stream at actual temperature (75 °C) and humid (50 % RH) conditions was 1847.69 mg/g, an increase of 55.47 % over the capacity of initial ACF (1188.71 mg/g). This work improves the overall I2 adsorption performance through hydrophobicity and pore size coordination.

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Antimicrobial and hydrophobic cellulose paper prepared by covalently attaching cinnamaldehyde for strawberries preservation

The demand for paper-based packaging materials as an alternative to incumbent disposable petroleum-derived polymers for food packaging applications is ever-growing. However, typical paper-based formats are not suitable for use in unconventional applications due to inherent limitations (e.g., excessive hydrophilicity, lack antimicrobial ability), and accordingly, enabling new capabilities is necessity. Herein, a simple and environmentally friendly strategy was proposed to introduce antimicrobial and hydrophobic functions to cellulose paper through successive chemical grafting of 3-aminopropyltriethoxysilane (APS) and cinnamaldehyde (CA). The results revealed that cellulose paper not only showed long-term antibacterial effect on different bacteria, but also inhibited a wide range of fungi. Encouragingly, the modified paper, which is fluorine-free, displays a high contact angle of 119.7°. Thus, even in the wet state, the modified paper can still maintain good mechanical strength. Meanwhile, the multifunctional composite papers have excellent biocompatibility and biodegradability. Compared with ordinary cellulose paper, multifunctional composite paper can effectively prolong the shelf life of strawberries. Therefore, the multifunctional composite paper represents good application potential as a fruit packaging material.

Preparation and characterization of liquefied eggplant branch bio-based controlled-release fertilizer

Bio-based coating materials have received increased attention because of their low-cost, environmentally friendly, and sustainable properties. In this paper, a novel coating material was developed to coat ureas using bio-based coating material derived from liquefied eggplant branches to form controlled-release ureas (CRUs). Also, the optimum proportion of liquefier was studied. Furthermore, dimethyl siloxane was used to modify liquified eggplant branches to make them hydrophobic, resulting in hydrophobic controlled-release ureas (SCRUs). This hydrophobic-enabled coating is environmentally friendly and highly efficient. The products were characterized by specific scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry, and the water contact angles of CRUs and SCRUs were determined. The nutrient-release characteristics of the SCRUs in water were determined at 25 °C and compared with those of CRUs. The results showed that the modification with dimethyl siloxane reduced the N release rate and increased the longevity of the fertilizer coated with hydrophobic bio-based coating material. In addition, organosilicon atoms on the SCRU surface also block the micro-holes on the coating and thus reduce the entry of water onto the coating. The results suggest that the new coating technology can create a hydrophobic surface on bio-based coating material and thus improve their controlled-release characteristics.

Multifunctional carbon nanotubes coated stainless steel mesh for electrowetting, hydrophobic, and dye absorption behavior

Electrowetting behaviour for carbon nanotubes (CNT) grown on stainless steel mesh was investigated. The effect of temperature, time, and applied bias voltage on the contact angle of water droplets was studied. The impact of temperature variation on contact angle was also performed for the temperature ranging from 25 to 70 °C. A decrement of contact angle by 68% was observed for the mentioned range indicating a transition from a hydrophobic to hydrophilic nature. A similar trend was observed on the application of electric potential to the CNT-modified stainless-steel mesh ranging from 0 to 8 V with a transition of contact angle from 146 to 30 deg respectively. A comparative analysis for the contact angle variation with time for CNT-coated mesh and uncoated mesh was performed for 180 min. It is observed that uncoated mesh shows a reduction in contact angle to 0 deg with time while the CNT coated mesh shows surplus hydrophobicity with a 2 deg decrement in the extent of time. CNT-modified mesh successfully absorbs 95% of rhodamine B (RB) dye and detergent from water in 10 cycles.

A novel modified polydopamine based on melanin-like materials for antibacterial, hydrophobic, and ultraviolet protective of textiles

The development of environmentally friendly multifunctional auxiliaries for textile modification is the focus of attention in textile industry in recent years. Polydopamine is an important biological macromolecule and widely used in biomedicine, nanomaterials, material surface modification and other fields. In this study, the novel multifunctional melanin-like nanoparticles (Nha-PDA NPs) were prepared and used for antibacterial, hydrophobic, and UV protective of textiles. Nha-PDA NPs were prepared with dopamine (DA) and n-hexylamine (Nha) by simple autoxidation copolymerization. Nha-PDA NPs were bound to the fabric surface through the PDA structure in Nha-PDA NPs that has been widely confirmed to have strong adhesion on the surface of many materials. The modified fabrics, Nha-PDA NPs@Cotton, had good hydrophobic, antibacterial and UV protective properties. The static water contact angles of the modified fabrics could reach 120°. The antibacterial rates of Nha-PDA NPs@Cotton against E. coli and S. aureus were above 85 %. The maximum UPF value of the modified cotton was 362, indicating that the ultraviolet protection performance was excellent. The fabric modified with multifunctional melanin-like nanoparticle provides a green way for the multifunctional modification of textiles.

Mechanism of self-recovery of hydrophobicity after surface damage of lotus leaf

The surfaces of lotus leaves with micro- and nano-waxy cuticle structures are superhydrophobic and possess a self-healing ability to regain hydrophobicity after damage. Inspired by this phenomenon, the problem of water-repellent coatings used in natural environments failing to perform after damage can be solved if these coatings are endowed with rapid self-repair and self-growth functions. However, there has been almost no exploration into the hydrophobicity self-repair process in lotus leaves. The changes in surface morphology during the hydrophobicity recovery process are not understood. There is a lack of research on the hydrophobicity recovery in lotus leaves. In this study, the damage and recovery experiments on lotus leaf surfaces were carried out in an artificial climate chamber, and the water repellency recovery process and typical water repellency roughness parameters regained time were obtained. Upon analyzing the differences in the recovery process of different damage types, the recovery mechanism after lotus leaf surface damage was obtained. Finally, it was found that the microscopic roughness determined the static contact angle (WCA) of the lotus leaf surface, and the nanoscopic roughness determined the rolling angle (SA). The dual factors of the recovery of the extruded epidermal tissue and the regeneration of the epidermal wax crystals determined the hydrophobicity recovery process in damaged lotus leaves.

Effects of Ca2+ and Mg2+ on Cu binding in hydrophilic and hydrophobic dissolved organic matter fractions extracted from agricultural soil

Dissolved organic matter (DOM) has significant effects on soil copper (Cu) bioavailability. However, little is known about Cu interactions and major cation binding toward hydrophilic and hydrophobic DOM components extracted from soil solutions. In this study, we investigated the influence of major cations (Ca2+/Mg2+) on Cu complexing characteristics on different hydrophilic and hydrophobic DOM fractions using absorbance spectroscopy at different Cu2+ concentrations in the absence/presence of Ca2+/Mg2+. Different compositional hydrophobic and hydrophilic DOM fraction proportions occurred at three agricultural soil sites, with the hydrophobic acid (HOA) fraction accounting for the highest proportion. The addition of Cu2+ generated distinct ultraviolet (UV) bands/peaks (processed by differential linear and differential logarithmic transformation) of three hydrophilic DOM fractions, whereas Cu2+ induced less and weak specific peaks in the differential spectra and differential logarithmic of the HOA fractions, indicating hydrophilic DOM fractions tend to have a higher density of Cu2+ complexation sites. In the presence of either Ca2+/Mg2+, increased depression caused by Cu2+ binding on different DOM fractions was observed with increasing 10, 100, and 1000 μM Ca2+/Mg2+ levels, with more significant variations in peaks/banks for hydrophilic base (HIB) and HOA fractions, and less for hydrophilic acid (HIA) and hydrophilic neutral (HIN) fractions. In our study, the spectral parameters ΔS225-275 and ΔS275-325 were successfully used to quantify Cu amounts bonded to HIA and HIB, respectively. They exhibited strong linear relationships with correlation coefficients (R2) of 0.96 for HIA and 0.87 for HIB, respectively. Furthermore, Mg2+ exhibited stronger competition with Cu for HIA and HIB binding sites when compared with Ca2+.

Engineered eco-friendly composite membranes with superhydrophobic/hydrophilic dual-layer for DCMD system

Considerable advancements have been made in the development of hydrophobic membranes for membrane distillation (MD). Nonetheless, the environmentally responsible disposal of these membranes poses a critical concern due to their synthetic composition. Herein, an eco-friendly dual-layered biopolymer-based membrane was fabricated for water desalination. The membrane was electrospun from two bio-polymeric layers. The top hydrophobic layer comprises polycaprolactone (PCL) and the bottom hydrophilic layer from cellulose acetate (CA). Additionally, silica nanoparticles (SiO2 NPs) were electrosprayed onto the top layer of the dual-layered PCL/CA membrane to enhance the hydrophobicity. The desalination performance of the modified PCL-SiO2/CA membrane was compared with the unmodified PCL/CA membrane using a direct contact membrane distillation (DCMD) unit. Results revealed that silica remarkably improves membrane hydrophobicity. The modified PCL-SiO2/CA membrane demonstrated a significant increase in water contact angle of 152.4° compared to 119° for the unmodified membrane. In addition, PCL-SiO2/CA membrane has a smaller average pore size of 0.23 ± 0.16 μm and an exceptional liquid entry pressure of water (LEPw), which is 3.8 times higher than that of PCL/CA membrane. Moreover, PCL-SiO2/CA membrane achieved a durable permeate flux of 15.6 kg/m2.h, while PCL/CA membrane showed unstable permeate flux decreasing approximately from 25 to 12 kg/m2.h over the DCMD test time. Furthermore, the modified PCL-SiO2/CA membrane achieved a high salt rejection value of 99.97% compared to a low value of 86.2% for the PCL/CA membrane after 24 h continuous DCMD operation. In conclusion, the proposed modified PCL-SiO2/CA dual-layer biopolymeric-based membrane has considerable potential to be used as an environmentally friendly membrane for the MD process.

Electrochemical Hydrophobic Tri-layer Interface Rendered Mechanically Graded Solid Electrolyte Interface for Stable Zinc Metal Anode

The aqueous zinc-ion battery is promising as grid scale energy storage device, but hindered by the instable electrode/electrolyte interface. Herein, we report the lean-water ionic liquid electrolyte for aqueous zinc metal batteries. The lean-water ionic liquid electrolyte creates the hydrophobic tri-layer interface assembled by first two layers of hydrophobic OTF- and EMIM+ and third layer of loosely attached water, beyond the classical Gouy-Chapman-Stern theory based electrochemical double layer. By taking advantage of the hydrophobic tri-layer interface, the lean-water ionic liquid electrolyte enables a wide electrochemical working window (2.93 V) with relatively high zinc ion conductivity (17.3 mS/cm). Furthermore, the anion crowding interface facilitates the OTF- decomposition chemistry to create the mechanically graded solid electrolyte interface layer to simultaneously suppress the dendrite formation and maintain the mechanical stability. In this way, the lean-water based ionic liquid electrolyte realizes the ultralong cyclability of over 10000 cycles at 20 A/g and at practical condition of N/P ratio of 1.5, the cumulated areal capacity reach 1.8 Ah/cm2 , which outperforms the state-of-the-art zinc metal battery performance. Our work highlights the importance of the stable electrode/electrolyte interface stability, which would be practical for building high energy grid scale zinc-ion battery.

Development of films based on chitosan, gelatin and collagen extracted from bocachico scales (Prochilodus magdalenae)

Biodegradable biopolymers from species of the animal kingdom or their byproducts are sustainable as ecological materials due to their abundant supply and compatibility with the environment. The research aims to obtain a biodegradable active material from chitosan, gelatin, and collagen from bocachico scales (Prochilodus magdalenae). Regarding the methodology, films were developed from gelatin, chitosan, and collagen from bocachico scales (Prochilodus magdalenae) at different concentrations using glycerol as a plasticizer and citric acid as a cross-linker. The films were obtained with the hydrated mass processed by compression molding and characterized according to humidity, water solubility, contact angle, mechanical properties, and structural properties. The results of the films showed a hydrophobic characteristic. First, the chitosan-collagen (CS/CO) films showed a yellowish color, while the gelatin-collagen (Gel/CO) films were transparent and less soluble than the gelatin-collagen (Gel/CO) films. Concerning mechanical properties, gelatin films showed higher stiffness and tensile strength than chitosan films. Furthermore, in the morphological analysis, more homogeneous chitosan films were obtained by increasing the concentration of citric acid. In general, chitosan, gelatin, and collagen extracted from the scales of the bocachico (Prochilodus magdalenae) are an alternative in the application of films in the food industry.

Investigation on bacterial capture and antibacterial properties of acid-treated Ti surface

OBJECTIVES

Utilizing Ti and Ti alloys as dental materials established a huge spurt in the field of dentistry. Since implantation is an invasive procedure that involves tissue penetration, infection control is mandatory for increasing the success rate of the implant treatment. In this study, we aimed to assess the impact of the surface physicochemical properties of acid-treated Ti on microorganisms specifically bacteria.

METHODS

After investigating the surface morphology and characteristics of acid-treated and untreated Ti sheets, we evaluated their potential to capture Escherichia coli (E. coli.) as well as the latter's survival on the surface of both types of sheets. Finally, we assessed the efficiency of the antibacterial properties exhibited by Ti against the oral microflora.

RESULTS

SEM images revealed surface roughening of the acid-treated Ti represented by significantly irregular shape. Moreover, the acid-treated Ti exhibited remarkable hydrophobicity. A quantitative evaluation confirmed that acid-treated Ti has higher bacterial capture and antibacterial properties than untreated Ti. Further experiments showed similar effects of both types of Ti not only on E. coli but also on oral microflora.

SIGNIFICANCE

Results suggest that acid treatment of Ti surface is a potent technique for enhancing the antibacterial properties of Ti-derived materials.

Cigarette filter fibres as a source and sink of trace metals in coastal waters

Cellulose acetate fibres from cigarette filters represent a form of microplastic that has received little attention in the environment. In this study, a ground composite of spent, smoked filter material (FM) has been used to investigate the role of cellulose acetate fibres as a source and a sink of trace metals (Cd, Co, Cu, Ni, Pb and Zn) in coastal waters. FM suspended in river water and seawater and mixtures thereof representative of an estuarine gradient resulted in the leaching of pre-existent metals derived from the combustion of tobacco, with mean percentages of release ranging from about 40 for Pb to nearly 90 for Cd, Co and Zn. Addition of 40 μg L-1 of each metal to FM suspensions incubated for 48 h yielded mean partition coefficients (KDs) ranging from <10 L kg-1 for Co to > 100 L kg-1 for Cu, Pb and Zn, with Cu and Ni displaying a net increase in KD with increasing salinity. Adsorption is interpreted in terms of hydrophobic interactions between metal-organic complexes and the cellulose acetate surface, and in support of this assertion KDs exhibited a significant, positive relationship with published metal-humic acid binding constants. The findings of this study improve our understanding of the role of cellulosic microfibres more generally in transporting trace metals in aquatic systems.

Whether membranes developed for organic solvent nanofiltration (OSN) tend to be hydrophilic or hydrophobic? ── a review

In the past few decades, organic solvent nanofiltration (OSN) has attracted numerous researchers and broadly applied in various fields. Unlike conventional nanofiltration, OSN always faced a broad spectrum of solvents including polar solvents and non-polar solvents. Among those recently developed OSN membranes in lab-scale or widely used commercial membranes, researchers preferred to explore intrinsic materials or introduce nanomaterials into membranes to fabricate OSN membranes. However, the hydrophilicity of the membrane surface towards filtration performance was often ignored, which was the key factor in conventional aqueous nanofiltration. The influence of surface hydrophilicity on OSN performance was not studied systematically and thoroughly. Generally speaking, the hydrophilic OSN membranes performed well in the polar solvents while the hydrophobic OSN membranes work well in the non-polar solvent. Many review papers reviewed the basics, problems of the membranes, up-to-date studies, and applications at various levels. In this review, we have focused on the relationship between the surface hydrophilicity of OSN membranes and OSN performances. The history, theory, and mechanism of the OSN process were first recapped, followed by summarizing representative OSN research classified by surface hydrophilicity and types of membrane, which recent OSN research with its contact angles and filtration performance were listed. Finally, from the industrialization perspective, the application progress of hydrophilic and hydrophobic OSN membranes was introduced. We started with history and theory, presented many research and application cases of hydrophilic and hydrophobic OSN membranes, and discussed anticipated progress in the OSN field. Also, we pointed out some future research directions on the hydrophilicity of OSN membranes to deeply develop the effect made by membrane hydrophilicity on OSN performance for future considerations and stepping forward of the OSN industry.

One pot synthesis of hydrophobic nanochitin aerogel via tert-butyl alcohol/water binary solvents as antibacterial and renewable oil superabsorbent

In this study, hydrophobic nanochitin aerogels are synthesized via one-pot synthesis strategy and subsequent freeze-drying technique, employing nanochitin, hexanal and formaldehyde as primary components. The tert-butyl alcohol (TBA)/water binary solvents are found efficient for well mixing of hydrophilic nanochitin and hydrophobic hexanal, which is fundamental for fabricating hydrophobic aerogels with water contact angle as high as 105°. Schiff base reaction between amino groups in nanochitin and aldehyde groups in hexanal is believed to be the main reason for the successful hydrophobization of nanochitin aerogels. Additionally, formaldehyde is employed to enhance the mechanical properties of aerogels via ice templated crosslinking technique. Nanochitin aerogels prepared in this work possess surface area as high as 237 m2 g-1, which are believed benefiting from the TBA/water binary solvents with lower density, smaller ice crystal and convenience in freeze-drying. The ultralow density, ultrahigh porosity, and hydrophobicity nature also lead to the advanced oil adsorption (as high as 210 g g-1) of nanochitin aerogels. The simple preparation process, nature sustainability and excellent adsorption performance is believed rendering nanochitin aerogels as a viable alternative for the remediation of oil spills.

Stearic acid-modified hollow hydroxyapatite particles with enhanced hydrophobicity for oil adsorption from oil spills

Oil spills lead to a substantial depletion of aquatic biodiversity. The mitigation of an oil spill can entail considerable financial outlays, give rise to consequential environmental impacts, and present formidable operational complexities. In this research, hollow hydroxyapatite particles with enhanced oil adsorption characteristics were prepared by surface modification with stearic acid. Peanut and vacuum pump oils were used to imitate oil spills and conduct adsorption tests. The 50% stearic acid-modified hydroxyapatite (Sa/HAP) adsorbent showed superior hydrophobic properties with respect to water contact angle data. Adsorption isotherm analysis revealed that the adsorption processes of peanut and vacuum pump oils matched well with the Sips isotherm model, with regression coefficients of 0.992 and 0.996, respectively. The oil adsorption by the modified hydroxyapatite (HAP) adsorbent was found to be 9.85 g·g-1 for peanut oil and 12.13 g·g-1 for vacuum pump oil. Furthermore, the adsorption kinetics performance was determined by chemical interaction, whereas the adsorption equilibrium capacities were 8.97 g·g-1 and 11.41 g·g-1, respectively. Recycling of the spent adsorbent was performed with toluene stripping. The synthesized oil-adsorbents were analyzed by SEM, FTIR, XRD, contact angle, and TGA analyses. Hence, the efficacy of the Sa/HAP material as a potential adsorbent for the purification of oil-contaminated water was established, attributed to its commendable oil adsorption capability.

Modified hydrophobic and oleophilic polyurethane sponge for oil absorption with MIL-53

A hydrophobic composite sponge (HPCS) is developed for the first time using the dip coating and drying method in an effort to remove organic contaminants like toluene and various oils from water. We employed a polyurethane (PU) sponge, which is reasonably priced, easily accessible, high mechanical strength and a suitable porous substrate on which the hydrophobic composite of MIL-53(Al) along with PDMS was anchored. A crystalline metal organic framework (MOF), MIL-53(Al), with adjustable porosity, functionality, and hydrophobicity is used for oil absorption. Polydimethylsiloxane (PDMS) is utilized to increase the hydrophobicity of MIL-53(Al). The MIL-53(Al)@PDMS composite was used to the produce a sponge having high hydrophobicity and oleophilicity. In contrast to PU sponge, which has a low water contact angle (79.64°), the hydrophobic composite sponge showed a wide range of oil absorption capacity (12-50.5 g/g), a very low amount of water absorption (0.84 g/g), and water contact angle of 128.13°. This hydrophobic composite performed phenomenally by separating out various oils and solvents from water even in varying ionic strengths. Moreover, the recyclability of the formed composite was also performed resulting into 6-20 cycles for different oils and solvents. The synthesized hydrophobic composite sponge was characterized using FT-IR, XRD, TEM, surface area analysis, FESEM, XPS, TG analysis and contact angle measurement. Furthermore, the materials used in the synthesis of composite are non-toxic and do not harm the environment, resulting in no greenhouse gas emissions making our composite environmentally friendly.

Microneedle array patches for sustained delivery of fluphenazine: A micron scale approach for the management of schizophrenia

Schizophrenia is a severe chronic mental illness characterised by impaired emotional and cognitive functioning. To treat this condition, antipsychotics are available in limited dosage forms, mainly oral and injectable formulations. Although injectable antipsychotics were designed to enhance adherence, they are invasive, painful and require a healthcare professional to be administered. To overcome such administration issues, extensive research has been focused on developing transdermal antipsychotic formulations. In this work, three microneedle (MN) systems were developed to deliver fluphenazine (FLU) systemically. A decanoic prodrug of FLU called fluphenazine decanoate (FLUD) was used in two of the MN formulations due to its high lipophilicity. FLU-D was loaded into dissolving MNs and nanoemulsion (NE)-loaded MNs. The parent drug FLU was loaded into poly(lactic-co-glycolic acid) (PLGA)-tipped MNs. All MN systems were characterised and evaluated in vitro and in vivo. The in vivo evaluation of the three developed MN systems showed their ability to deliver FLU into the systemic circulation, as the Cmax of FLU-D dissolving MNs was 36.11 ± 12.37 ng/ml. However, the Cmax of FLU-D NE loaded dissolving MNs was 12.92 ± 6.3 ng/ml and for FLU-PLGA tipped MNs was 21.57 ± 2.45 ng/ml. Compared to an intramuscular (IM) injection of FLU-D in sesame oil, the relative bioavailabilities were 26.96 %, 21.73 % and 42.45 % for FLU-D dissolving MNs, FLU-D NE dissolving MNs and FLU-PLGA tipped MNs, respectively. FLU plasma levels were maintained above the minimum human therapeutic limits for a week. Consequently, these various MN formulations are considered to be a viable options for the transdermal delivery of fluphenazine and its prodrug. The three MN systems developed offer patients a user-friendly, painless, and convenient long-acting delivery method for FLU. Reducing dosing frequency and using less invasive drug administration methods can enhance adherence and foster positive therapeutic outcomes. This study demonstrates the capability and adaptability of MNs technology to transport hydrophobic molecules from the skin to the systemic circulation.

Surface modification of polypropylene hollow fiber membranes using fluorosilane for CO2 absorption in a gas-liquid membrane contactor

Conventional methods for improving the hydrophobicity of polypropylene (PP) membranes to prevent wetting phenomena require complex pretreatment procedures in order to activate the surface for enabling the reaction with fluorosilane (FS)-based materials. This study successfully prepared PP membrane contactors with enhanced hydrophobicity through a simple single-step dip-coating method using perfluoroether-grafted silanes for CO2 capture. The FS coating layer on the PP membrane surface was confirmed through ATR-FTIR spectroscopy, XPS, FE-SEM, and EDS. Furthermore, the evaluation of the CO2 absorption performance and long-term stability of the FS-coated PP membrane according to the variation of the gas flow rate (50, 100, 200, 400, and 800 mL/min) confirmed the superior chemical stability and durability of our membranes to those of previously reported hydrophobic membranes. The as-prepared FS-coated PP membrane expands the application scope of gas-liquid membrane contactors for CO2 capture from the flue gas of coal-fired power plants.

Soil organic matter carbon chemistry signatures, hydrophobicity and humification index following land use change in temperate peat soils

Peatlands play a critical role in the global carbon cycle, storing large amounts of carbon because of a net imbalance between primary production and the microbial decomposition of the organic matter. Nevertheless, peatlands have historically been drained for energy sources (e.g. peat briquettes), forestry, or agriculture - practices that could affect the quality of the soil organic matter (SOM) composition, hydrophobicity and humification index. This study compared the effect of land use change on the quality and composition of peatland organic material in Co-Offaly, Ireland. Specifically, drained and grazing peat (grassland), drained and forest plantation peat (forest plantation), drained and industrial cutaway peat (cutaway bog) and an undrained actively accumulating bog (as a reference for natural peatland) were studied. Fourier-transform infrared spectroscopy (FTIR) was used to examine the organic matter quality, specifically the degree of decomposition (DDI), carbon chemistry signatures, hydrophobicity and humification index. The ratio of hydrophobic to hydrophilic group intensities was calculated as the SOM hydrophobicity. In general, there is greater variance in the carbon chemistry signature, such as aliphatic methyl and methylene, C=O stretching of amide groups, aromatic C=C, strong H-bond C=O of conjugated ketones and O-H deformation and C- O stretching of phenolics and secondary alcohols of the peat samples from industrial cutaway bog samples than in the grassland and forest plantation samples. The hydrophobicity and the aromaticity of the soil organic matter (SOM) are significantly impacted by land use changes, with a trend of order active bog > forest plantation > industrial cutaway bog > grassland. A comparison of the degree of decomposition index of the peat from active bog showed a more advanced state of peat degradation in grassland and industrial cutaway bog and, to a lesser extent, in forest plantation.

Phase inverted hydrophobic polyethersulfone/iron oxide-oleylamine ultrafiltration membranes for efficient water-in-oil emulsion separation

Exploration and transportation of oil offshore can result in oil spills that cause a wide range of adverse environmental consequences and destroy aquatic life. Membrane technology outperformed the conventional procedures for oil emulsion separation due to its improved performance, reduced cost, removal capacity, and greater eco-friendly. In this study, a hydrophobic iron oxide-oleylamine (Fe-Ol) nanohybrid was synthesized and incorporated into polyethersulfone (PES) to prepare novel PES/Fe-Ol hydrophobic ultrafiltration (UF) mixed matrix membranes (MMMs). Several characterization techniques were performed to characterize the synthesized nanohybrid and fabricated membranes, including scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), contact angle, and zeta potential. The membranes' performance was assessed using a surfactant-stabilized (SS) water-in-hexane emulsion as a feed and a dead-end vacuum filtration setup. The incorporation of the nanohybrid enhanced the hydrophobicity, porosity, and thermal stability of the composite membranes. At 1.5 wt% Fe-Ol nanohybrid, the modified PES/Fe-Ol MMM membranes reported high water rejection efficiency of 97.4% and 1020.4 LMH filtrate flux. The re-usability and antifouling properties of the membrane were examined over five filtration cycles, demonstrating its great potential for use in water-in-oil separation.

Evaluating fundamental biochar properties in relation to water holding capacity

Biochar products that hold and release water within a stable carbonised porous structure provide many opportunities for climate mitigation and a range of applications such as for soil amendments. Biochar that are produced from various organic feedstocks by pyrolysis can provide multiple co-benefits to soil including improving soil health and productivity, pH buffering, contaminant control, nutrient storage, and release, however, there are also risks for biochar application in soils. This study evaluated fundamental biochar properties that influence Water Holding Capacity (WHC) of biochar products and provides recommendations for testing and optimising biochar products prior to soil applications. A total of 21 biochar samples (locally sourced, commercially available, and standard biochars) were characterised for particle properties, salinity, pH and ash content, porosity, and surface area (with N₂ as adsorbate), surface SEM imaging, and several water testing methods. Biochar products with mixed particle size, irregular shapes, and hydrophilic properties were able to rapidly store relatively large volumes of water (up to 400% wt.). In contrast, relatively less water (as low as 78% wt.) was taken up by small-sized biochar products with smooth surfaces, along with hydrophobic biochars that were identified by the water drop penetration test (rather than contact angle test). Water was stored mostly in interpore spaces (between biochar particles) although intra-pore spaces (meso-pore and micropore scale) were also significant for some biochars. The type of organic feedstock did not appear to directly affect water holding, although further work is needed to evaluate mesopore scale processes and pyrolytic conditions that could influence the biochemical and hydrological behaviour of biochar. Biochars with high salinity, and carbon structures that are not alkaline pose potential risks when used as soil amendments.

Construction of Self-Assembly Based Tunable Absorber: Lightweight, Hydrophobic and Self-Cleaning Properties

Although multifunctional aerogels are expected to be used in applications such as portable electronic devices, it is still a great challenge to confer multifunctionality to aerogels while maintaining their inherent microstructure. Herein, a simple method is proposed to prepare multifunctional NiCo/C aerogels with excellent electromagnetic wave absorption properties, superhydrophobicity, and self-cleaning by water-induced NiCo-MOF self-assembly. Specifically, the impedance matching of the three-dimensional (3D) structure and the interfacial polarization provided by CoNi/C as well as the defect-induced dipole polarization are the primary contributors to the broadband absorption. As a result, the prepared NiCo/C aerogels have a broadband width of 6.22 GHz at 1.9 mm. Due to the presence of hydrophobic functional groups, CoNi/C aerogels improve the stability in humid environments and obtain hydrophobicity with large contact angles > 140°. This multifunctional aerogel has promising applications in electromagnetic wave absorption, resistance to water or humid environments.

Nutrient controlled release performance of bio-based coated fertilizer enhanced by synergistic effects of liquefied starch and siloxane

The porous structure and hydrophilicity of coating shells affect the nutrient controlled-release performance of castor oil-based (CO) coated fertilizers. In order to solve these problems, in this study, the castor oil-based polyurethane (PCU) coating material was modified with liquefied starch polyol (LS) and siloxane, and a new coating material with cross-linked network structure and hydrophobic surface was synthesized, and used it to prepare the coated controlled-release urea (SSPCU). The results demonstrated that the cross-linked network formed by LS and CO improved the density and reduced the pores on the surface of the coating shells. The siloxane was grafted on the surface of coating shells to improve its hydrophobicity and thus delayed water entry. The nitrogen release experiment indicated that the synergistic effects of LS and siloxane improved the nitrogen controlled-release performance of bio-based coated fertilizers. Nutrient released longevity of SSPCU with 7 % coating percentage reached >63 days. Moreover, the nutrient release mechanism of coated fertilizer was further revealed by the analysis of the release kinetics analysis. Therefore, the results of this study provide a new idea and technical support for development of efficient and environment-friendly bio-based coated controlled-release fertilizers.

Efficient production of bacterial cellulose based composites using zein protein extracted from corn gluten meal

Corn gluten meal (CGM) which is a byproduct of corn wet milling is mainly used in animal and poultry feed. Due to its high protein content in CGM, it has been utilized for the extraction of zein protein which is the main hydrophobic protein present in the corn. The extracted zein protein was used along with bacterial cellulose that is highly pure, biocompatible, biodegradable, and generally regarded as safe for the preparation of composites that have better surface properties and applications. SEM analysis of the synthesized composite showed layering, incorporation of zein protein onto the surface of bacterial cellulose. XRD results showed there were no significant changes in the peak intensity due to the surface modification of BC membranes composites in comparison to pristine BC and TGA showed the thermostable characteristic of bacterial cellulose and are more capable of withstanding high temperature. Maximum production of bacterial cellulose was observed when corn gluten meal and zein protein were used as a cheap nitrogen sources for the production of bacterial cellulose along with other medium components. An increase of approximately 4.0 g/l of bacterial cellulose from 13.561 g/l to 17.83 g/l was observed when corn gluten meal and zein protein were used in the production medium. The prepared BC-based zein protein composites can be utilized for food packaging and storage applications.

Sustainable cellulose-based multifunctional material for electromagnetic shielding, flame retardancy and antibacterial

Biomass-based multifunctional electromagnetic shielding materials have attracted extensive interest in academia and industry due to the sustainability of biomass and the environmental adaptability of multifunctional materials. After removing lignin and hemicellulose wood become a porous substrate with aligned cellulose, which is a good platform for building cellulose-based materials. In this work, a cellulose composite with sandwich-like structure was constructed by in-situ polymerization of aniline on delignified wood and coating a PDMS/CNT layer. Benefiting from the natural porous hierarchical structure and the constructed multilayer continuous conductive network, the PDMS/CNT/PANI WA exhibits excellent electrical conductivity (18.6 S/m) and electromagnetic shielding performance (shielding efficiency value of 26 dB at the X band (8.2-12.4 GHz)). The synergistic effect of PANI and CNT endowed the material with excellent flame retardancy (HRR, THR and HRC decreased by 84 %, 53.4 % and 83.3 %) and significant antibacterial activity. Moreover, PDMS imparts a water contact angle of 105° to the material, which acts as a protective layer, further improves the durability of the material. This work provides a new strategy for developing sustainable and multifunctional electromagnetic shielding materials.

Gas Plasma Surface Modification for Biological Assays

Surface chemistry plays an important role in the adsorption and immobilization of enzymes and antibodies. Gas plasma technology performs surface preparation that assists in the attachment of molecules. Surface chemistry helps to manage a material's wetting, joining, or the reproducibility of surface interactions. There are numerous examples of commerically available products that utilize gas plasma in their manufacturing process. Examples of products treated by gas plasma are well plates, microfluidic devices, membranes, fluid dispensers, and some medical devices. This chapter presents an overview of gas plasma technology and provides a guide for using gas plasma for designing surfaces in product development or research.

Bio-based phytic acid@polyurushiol‑titanium complex coated cotton fabrics with durable flame retardancy for oil-water separation

Bio-based hydrophobic coating modified cotton fabrics with durable flame retardancy are of high interest in the application of oil-water separation for not only avoiding the use of hazardous substances but also improving the fire safety during use. Herein, phytic acid@Polyurushiol‑titanium complex coated cotton fabric was developed using the facile dip-coating method involving the sequential immersion in the solution of poly(ethyleneimine), phytic acid, titanium oxide, and urushiol. The underlying coating accommodated abundance of phytic acid, which imparted excellent flame retardancy to cotton fabric, and the top coating composed of the polyurushiol‑titanium complex endowed cotton fabric with high hydrophobicity that the water contact angle (WCA) was up to 149.8°. The hydrophobicity also guaranteed effective protection of the underlying phytic acid against chemical solvents and abrasion. Besides, the hydrophobic coating allowed cotton fabric for good self-cleaning and effective oil-water separation. Therefore, the preparation of phytic acid@polyurushiol‑titanium complex coated cotton fabric offers a promising approach to construct durable biomass-coated cellulose-based fabric with multifunctionality.

A simple integrated microfluidic platform for the research of hydrogels containing gradients in cell density induced breast cancer electrochemotherapy

Cell density is important for tumour metastasis, treatment and prognosis. Characterizing changes in cell density for electrochemotherapy (ECT) can reveal sub-populations in pathological states, and adjust treatment program. In this work, a simple and convenient microfluidic platform was developed to study the effect cell density on ECT by integrating the improved cell gradient generator, cell culture chamber and indium tin oxide interdigital electrodes. Agarose, as extracellular matrix (ECM), was used to 3D cell culture to imitate in vivo microenvironment. The precision and reproducibility of cell density gradient with agarose solution were achieved because the hydrophobic modification of microchannels surface resulted in reducing cell adhesion and residue. ECT cytotoxicity assay with difference in cell densities was studied. The results showed that tumour cell density is one of the most factors for ECT treatment and ECT cytotoxicity has a certain of cell density-depended. But only electroporation on low cell density level, ECM would be one of the most key factors for ECT cytotoxicity, which would provide a new idea for chip-based cell assay in clinical diagnosis and drug screening in ordinary laboratories.

Construction of hydrophobic fire retardant coating on cotton fabric using a layer-by-layer spray coating method

Multifunctional cotton fabric was prepared through a two-step layer-by-layer spray coating method, where the first layer of the coating comprising chitosan and ammonium phytate provided fire retardancy, and the second one with PDMS-ZnO composite imparted hydrophobicity to the fabric. A molecular dynamics (MD) simulation study was carried out to calculate interfacial adhesion of different components of the coating, based on which the sequencing of the coating layers was determined and used to prepare coated samples. The coated fabric demonstrated a significant improvement in fire retardancy through an increase in LOI from 18 % in control to 30 %, a reduction in char length from 30 cm to 7 cm, and a decrease in peak and total heat release rate values by 75 % and 33 %, respectively. The hydrophobicity of coated fabric was tested via water drop test where coated sample maintained a contact angle of 148° for up to 120 s, while the control sample showed 0°.

Hydrophobic π-π stacking interactions and hydrogen bonds drive self-aggregation of luteolin in water

Luteolin is a flavonoid obtained from different plant species. It is known for its versatile biological activities. However, the beneficial effects of luteolin have been limited to small concentrations as a result of poor water solubility. This study aimed at investigating the hydrophobic interaction and hydration of luteolin towards the improvement of its solubility when used as a drug. We report the aggregation properties of luteolin in water by varying the number of monomers using atomistic molecular dynamics simulation. Results show that the equilibrium structure of luteolin occurs in an aggregated state with different structural arrangements. As the monomers size increase, the antiparallel flipped conformation dominates over T-shaped antiparallel, T-shaped parallel, and antiparallel conformations. The formation of intramolecular hydrogen bonding of 0.19 nm between the keto-enol groups results in hydrophobic characteristics. A larger cluster exhibits slow hydrogen bond dynamics for luteolin-luteolin than luteolin-water interaction. Water structure at large cluster size exhibited slow dynamics and low self-diffusion of luteolin. The existence of hydrophobic π-π and hydrogen bonds between luteolin molecules drives strong self-aggregation resulting in poor water solubility. Breakage of these established interactions would result in increased solubility of luteolin in water.

Low-cost, open-source contact angle analyzer using a mobile phone, commercial tripods and 3D printed parts

Measurement of contact angle is important in many areas of science and engineering research. Contact angle analyzers are however not easily accessible due to their expensive cost, which hinders their use in research and also in education. In this study we propose a low-cost contact angle analyzer that can be assembled with 3D printed parts. Mobile phone is used for imaging, and the image is analyzed using an open-source ImageJ plugin. Commercial camera tripods are used as platform that provides movement in many degrees of freedom, which are important in leveling of the substrate and proper imaging of droplets. We utilize the tripods to build imaging modules, sample plate module and volume metering module, each of which perform distinct tasks. Especially, we characterize the usefulness of the volume metering module, which helps users dispense same volume of liquid to reduce human error during measurement. The cost of an analyzer is $255.10, which is an order of magnitude lower compared to commercial products. With the advancement in open source software and upgrades in the hardware modules, we expect that the proposed contact angle analyzer to have a positive impact in resource limited research labs and educational environments.

Pyrite activated peroxymonosulfate combined with as a physical-chemical conditioner modified biochar to improve sludge dewaterability: analysis of sludge floc structure and dewatering mechanism

In this study, we proposed an advanced oxidation process of pyrite (FeS₂) and peroxymonosulfate (PMS) and prepared a modified polyaluminum chloride biochar (P-BC). The motivation is to use the combination of FeS₂ + PMS + P-BC to improve waste activated sludge (WAS) dewaterability. The method to improve the sludge dewatering effect with the combination of FeS₂ + PMS + P-BC is as follows: in the first step, pour 0.75 g/g TSS FeS₂ and 0.6 g/g TSS PMS into the sludge, and stir for 15 min. Then, add P-BC and stir for 5 min; complete the entire WAS processing process. The vacuum filtration test was used to evaluate the dehydration effect. The water content (Wc) and specific resistance to filtration (SRF) of the raw sludge can be reduced from the original values of 92% and 2.36 × 10¹³ m/kg to 67% and 9.89 × 10¹¹ m/kg, respectively. The results showed that the combination of FeS₂ + PMS + P-BC can effectively improve the sludge dewatering effect through oxidation. A laser particle size analyzer is used to observe changes in sludge particle size. The median diameter of sludge particles increased from 55.37 to 64.56 μm. A zeta analyzer to is used observe changes in sludge zeta potential. The zeta potential of sludge particles increased from - 15.8 to 0.4 mV. In the analysis of extracellular polymeric substances (EPS) of sludge, it was found that protein (PN) and polysaccharide (PS) in EPS decreased significantly. To further analyze the phenomenon of PN and PS drop, excitation-emission-matrix spectra (3D-EEM) was used. To observe the changes of sludge functional group, X-ray photoelectron spectroscopy was used. It was found that FeS₂ + PMS + P-BC can destroy the functional groups of sludge, such as O-H, C-C, and O═C-NH- related to proteins and polysaccharides.

Oil/water separation using elastic bio-aerogels derived from bagasse: Role of fabrication steps

Bio-aerogels hold great promise for selective oil separation from water due to their light weight and high sustainability. However, how the fabrication methods impact the elasticity and oil sorption performance of bio-aerogels still needs systematic comparison and in-depth investigation. In this study, the fabrication of hydrophobic bio-aerogels with good elasticity and reusability was optimized using a factorial design based on the dosages of bagasse-derived cellulose nanofiber, sodium alginate, and calcium carbonate. The role of each key fabrication step, including ice-templating, calcium crosslinking, solvent dehydration, freeze-drying, and silanization, played in the material properties was also elucidated. The optimized bio-aerogels had a low density (7.55 mg/cm³), high porosity (99.47%), large specific surface area (39 m²/g), and strong hydrophobicity (water contact angle of 135°). In addition, the bio-aerogels exhibited outstanding selective oil separation ability towards the oil-water mixture, with oil sorption capacity of 89-126 times its weight. The in-situ calcium crosslinking and solvent dehydration were vital to create porosity and preserve the microstructure of the bio-aerogels. The chemical vapor deposition rendered the bio-aerogels hydrophobic and oleophilic, greatly enhancing the separability of oil from the water-oil mixture.

Photoluminescent and photochromic smart window from recycled polyester reinforced with cellulose nanocrystals

Smart windows with long-persistent phosphorescence, UV protection, high transparency, and high rigidity were developed by easily immobilizing varying ratios of lanthanide-activated aluminate phosphor nanoscale particles within a composite of recycled polyester/cellulose nanocrystals (RPET/CNC). Cellulose nanocrystals were prepared from rice straw waste. Cellulose nanocrystals were used at low concentration as both crosslinker and drier to improve both transparency and hardness. The phosphor nanoscale particles must be distributed into the recycled polyester/cellulose nanocrystals composite bulk without agglomeration in order to produce transparent RPET/CNC substrates. Photoluminescence characteristics were also studied by using spectroscopic profiles of excitation/emission and decay/lifetime. The hardness efficiency was also examined. This transparent recycled polyester waste/cellulose nanocrystals nanocomposite smart window has been shown to change color under UV light to strong green and to greenish-yellow when it is dark, as proved by CIE Lab color parameters. It was found that the afterglow RPET/CNC smart window had phosphorescence intensities of 428, 493 and 523 nm upon excitation at 368 nm. There were evidences of improved UV shielding, photostability, and hydrophobic activity. In the presence of low phosphor ratio, the luminescent RPET/CNC substrates showed quick and reversible fluorescent photochromic activity when exposed to UV radiation.

Preparation and performance of photocatalytic NO degradation superhydrophobic coatings for tunnel

Due to the semi-closed structure of the tunnel, serious air pollution in tunnels from vehicle exhaust becomes an issue which needed to be addressed. Among the exhaust, nitric oxide (NO) is typically considered as one of the main pollutants. In this paper, a superhydrophobic photocatalytic coating was fabricated by a spraying method by airbrush with a WO₃/TiO₂ photocatalysis for NO degradation. The water advanced contact angle (WACA) of the coating reached 166.32°, and the WACA was still above 145° after the 30 times abrasion test. The coating exhibited an excellent ability to remove inorganic and organic pollutants. Also, the NO degradation efficiency of this superhydrophobic coating under ultraviolet and visible light sources and humid environments was tested. When the relative humidity reached 98%, the NO degradation efficiency of the coating remained unchanged under visible light irradiation compared with the relative humidity of 45%. In addition, the coating exhibited prominent stability of NO degradation during the cyclic test. Furthermore, the WT coating showed stability and synergy of self-cleaning and photocatalysis toward NO degradation, which ensured the long-term use of the coating. Finally, a synergistic mechanism for self-cleaning and photocatalysis was proposed. This may provide a new idea and support for the application of photocatalytic technology in the degradation of NO in the tunnel.

Effect of functional group and structure on hydrophobic properties of environment-friendly lignin-based composite coatings

Hydrophobic coatings are widely used in a variety of materials surfaces. However, it remains a great challenge for the non-toxic and environmentally-friendly production of hydrophobic coatings. Herein, two nano-scale spherical lignin/SiO₂ composite particles are synthesized based on the electrostatic interaction and the steric hindrance effect inspired by the self-protection of straw. Introduction of positively charged quaternary ammonium enhances the possibility of electrostatic self-assembly between lignin and SiO₂ for QAL/SiO₂, and access of super-long hydrophobic chains induces the formation of nano-sized particles for QALC₁₂/SiO₂. The coatings were fabricated by simply spraying on substrates and hydrophilic/hydrophobic properties were detected. The results show that the long hydrophobic chain can enhance the hydrophobic properties of lignin polymers (CA = 129°) and the spherical micro-nano structure is beneficial to improve the hydrophobic properties of the lignin/SiO₂ composite (CA = 137°). Meanwhile, the hydrophobic coating has good self-cleaning performance. The excellent hydrophobic and self-cleaning properties are mainly benefited from the nano effect, reasonable hydrophilic/hydrophobic structure, and good dispersibility of spherical structure. This work not only provides a kind of lignin-based nano-scale waterproof coatings holding excellent properties in terms of cost, scalability, and robustness, but also has important significance for the high-value utilization of biomass resources.

Biocompatible and optically stable hydrophobic fluorescent carbon dots for isolation and imaging of lipid rafts in model membrane

Lateral heterogeneity in cell membranes features a variety of compositions that influence their inherent properties. One such biophysical variation is the formation of a membrane or lipid raft, which plays important roles in many cellular processes. The lipid rafts on the cell membrane are mostly identified by specific dyes and heavy metal quantum dots, which have their own drawbacks, such as cytotoxicity, photostability, and incompatibility. To this end, we synthesized special, hydrophobic, fluorescent, photostable, and non-cytotoxic carbon dots (CDs) by solvent-free thermal treatment using non-cytotoxic materials and incorporated into the lipid bilayers of giant unilamellar vesicles (GUVs) made from 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and dipalmitoylphosphatidylcholine (DPPC) lipids. A 2:2:1 mixture of DOPC, DPPC, and cholesterol (Chol) develops lipid rafts on the membrane by phase separation. The photophysical properties of the CDs get modulated on incorporation into the lipid rafts that identifies the membrane heterogeneity. The main attempt in this work is to develop a new, simple, cost-effective, and bio-friendly lipid raft marker, which can be used in biological applications, alongside other conventional raft markers, with more advantages.

An Overview of Structure and Dynamics Associated with Hydrophobic Deep Eutectic Solvents and Their Applications in Extraction Processes

Recent development of novel water-immiscible green solvents known as hydrophobic deep eutectic solvents (HDESs) has opened the gates for applications requiring media where presence of water is undesirable. Ever since they were prepared, researchers have used HDESs in diverse fields such as extraction processes, CO 2 sequestration, membrane formation, and catalysis. The microstructure and dynamics associated with the species comprising HDESs guide their suitability for specific applications. For example, varying the alkyl tail length of HDES components significantly affects the dynamics of the components and thus helps in tuning the efficiency of extraction processes. The development of HDESs is still in infancy and very few theoretical studies are available in the literature that help in understanding the structure and dynamics of HDESs. This review highlights the recent work focused on the microscopic structure and dynamics of HDESs and their potential applications, particularly in extraction processes. We have also provided a glimpse of how the integration of experiments and computational techniques can help understand the mechanism of extraction processes.

Nanochitosan functionalized hydrophobic starch/guar gum biocomposite for edible coating application with improved optical, thermal, mechanical, and surface property

The current work demonstrates a unique approach of utilizing nanochitosan (NCS) based edible nanomodifier for functionalizing starch (ST)/guar gum (GG) biocomposite with superior packaging properties targeting stringent edible food packaging on fresh cuts. The effectiveness of NCS in terms of structure-property-performance analysis of ST/GG biocomposites was done. The inclusion of NCS to the biocomposites of ST/GG converts its hydrophilic surface nature to hydrophobic (contact angle of ~114°) by modifying the surface features. The addition of NCS improved the thermal stability, where the observed 10% weight degradation of ST biocomposites were ~79.36, ~80.49, and ~186.89 °C for neat ST, ST/GG biocomposites, and ST/GG/NCS (3% w/v) (ST-GG-NCS3), respectively. The observed transparency of ST, ST-GG, and ST-GG-NCS3 were 21, 8, and 48%, respectively in the visible region suggesting consumer preference for transparent packaging materials. The wt% of O, C and N elements in ST-GG-NCS3 as observed by EDX spectra were ~ 50.2, ~47.6, and ~ 2.2%, respectively, which confirm the safety of the materials. Additionally, it is noteworthy to mention that the storage quality in terms of microbial growth, pH change, color attributes, and weight loss are better preserved when used as an edible coating on cut apple fruits.

Application of MCM-48 with large specific surface area for VOCs elimination: synthesis and hydrophobic functionalization for highly efficient adsorption

MCM-48 molecular sieve with a large specific area (1470.87 m²/g) was hydrothermally synthesized for VOCs elimination by the adsorption method. The dynamic adsorption behaviors of toluene on this material were evaluated via breakthrough curves under both dry and wet conditions. A high toluene adsorption capacity of 171.13 mg/g was observed under dry conditions; however, in the presence of water vapor (20% RH), the adsorption capacity greatly decreased to 58.88 mg/g due to the competitive occupation of adsorption sites between water molecules and toluene molecules. To improve the affinity to toluene, functionalized MCM-48 materials were obtained by the co-condensation method and grafting method, respectively. It was found that co-M48(1:5)-100/48 sample by co-condensation method presents the highest dynamic adsorption capacity at both dry condition (194.62 mg/g) and 20% RH (122.42 mg/g), which has a significant advantage in the same type of adsorbent. This could be ascribed to the conjugated π-electrons effect between aromatic rings of phenyl groups uniformly distributed in MCM-48 skeleton and toluene molecules, which was qualitatively confirmed by FTIR. Moreover, cycle tests confirmed that this adsorbent possesses superior stability. The Yoon-Nelson model was successfully employed to describe the dynamic adsorption behavior of toluene over the organofunctionalized MCM-48 adsorbents, and the adsorption force of toluene was explained. Finally, a diagram describing the effect of different functionalization methods on the hydrophobicity and organophilicity of MCM-48 was given for a better understanding.

A study on the adsorption behaviors of three hydrophobic quinolones by ordered mesoporous CMK-3

In this work, a series of ordered mesoporous carbon nanomaterials (CMK-3) have been synthesized by a hard-template method at temperatures of 80 °C, 100 °C and 130 °C, which can serve as adsorbents for efficient adsorption of quinolones in aqueous solutions. The physicochemical properties and the morphologies of these CMK-3 have been well characterized, showing mesoporous channels with the specific surface area reaching up to 1290 m²/g. Adsorption studies have been performed on three hydrophobic quinolones: norfloxacin (NOR), ciprofloxacin (CIP) and enrofloxacin (ENR), with the adsorption capacities of 403 mg/g, 479 mg/g and 510 mg/g, respectively, at room temperature. The adsorption kinetics of the three quinolones are in accordance with the pseudo-second kinetic model, and the adsorption isotherm curves conform to Langmuir isotherm model. Significantly, the adsorption thermodynamics confirms that the adsorption processes are spontaneous endothermic. Finally, the adsorption mechanism has been discussed, which can be attributed to the synergistic effect of pore diffusion, hydrophobic bond, and electron donor-acceptor interaction.

Hydrophobic and porous carbon nanofiber membrane for high performance solar-driven interfacial evaporation with excellent salt resistance

Interfacial evaporation has recently received great interest from both academia and industry to harvest fresh water from seawater, due to its low cost, sustainability and high efficiency. However, state-of-the-art solar absorbers usually face several issues such as weak corrosion resistance, salt accumulation and hence poor long-term evaporation stability. Herein, a hydrophobic and porous carbon nanofiber (HPCNF) is prepared by combination of the porogen sublimation and fluorination. The HPCNF possessing a macro/meso porous structure exhibits large contact angles (as high as 145°), strong light absorption and outstanding photo-thermal conversion performance. When the HPCNF is used as the solar absorber, the evaporation rate and efficiency can reach up to 1.43 kg m^-2h^-1 and 87.5% under one sunlight irradiation, respectively. More importantly, the outstanding water proof endows the absorber with superior corrosion resistance and salt rejection performance, and hence the interfacial evaporation can maintain a long-term stability and proceed in a variety of complex conditions. The HPCNFs based interfacial evaporation provides a new avenue to the high efficiency solar steam generation.

Three-phase interface photocatalysis for the enhanced degradation and antibacterial property

Semiconductor photocatalysis, as a means of utilizing stranded renewable solar resources, is now emerging as a viable and promising approach for increasingly severe water pollution. In this work, a high-performance photocatalytic system has been fabricated by immobilizing spiky TiO₂/Au nanohybrids on one side of hydrophobic nanoPE substrate (PE-TiO₂/Au) that forces the enabling of air-liquid-solid triphase photocatalytic interface. Such a triphase system allows efficient oxygen access to the photocatalyst surface, which is feasible for charge separation and reactive oxygen species (ROS) production. Two modes of triphase systems with different gas flow paths were constructed, in which PE-TiO₂/Au was floating on the aqueous solution surface (exposed mode) or immersing in aqueous phase (immersed mode). It is worth mentioning that the exposed PE-TiO₂/Au enables a more efficient oxygen supply, thus leading to a 5.5-fold and 1.8-fold higher reaction kinetics as compared to normal liquid-solid diphase system and immersed PE-TiO₂/Au. Meanwhile, PE-TiO₂/Au also exerts bactericidal effect under visible light irradiation, which effectively inactivates S.aureus (>99.9%) in a lean period of 30 min. The qualities of high lethality rate and short reaction time are endowed to PE-TiO₂/Au due to the co-effect of unique triphase interface microenvironment and elaborate heterojunction of spiky TiO₂/Au nanohybrids. In this paper, we have revealed for the first time that the antibacterial efficiency can be effectively improved by increasing the oxygen supply with the construction of three-phase interface, which represents a promising option in designing highly efficient photocatalytic systems for sewage purification applications.

Differential surface partitioning for an ultrasensitive solid-state SERS sensor and its application to food colorant analysis

Solid-state SERS sensors are desirable point-of-care tools due to their portability. However, the level of SERS sensitivity achieved in liquid phase is rarely duplicated in the solid phase. We report herein the fabrication of a SERS sensor using alumina beads as the solid support and demonstrate its high SERS sensitivity with the model analyte 4-aminophenyl disulfide (4-APDS). The key to sensitivity is a hydrophilic-hydrophobic surface gradient constructed by sequentially coating with the surfactant cetyltrimethylammonium bromide and fluorous 1H,1H,2H,2H-perfluorooctyltriethoxysilane. The surface gradient, together with chloride etching, allows the detection of 4-APDS at the low concentration of 10^-15 M. The practicality of the sensor beads is evidenced by successfully tracking the SERS fingerprints of five food colorant standards in the SERS spectra of a popular candy product. These SERS sensor beads are easy to prepare, convenient to use, and highly responsive as a SERS platform for the analysis of colorants.

Electrochemical degradation performance and mechanism of dibutyl phthalate with hydrophobic PbO2 electrode

A polytetrafluoroethylene (PTFE) doped PbO₂ anode with a highly hydrophobicity was fabricated by electrodeposition method. In this process, vertically aligned TiO₂ nanotubes (TiO₂NTs) are formed by the anodic oxidation of Ti plates as an intermediate layer for PbO₂ electrodeposition. The characterization of the electrodes indicated that PTFE was successfully introduced to the electrode surface, the TiO₂NTs were completely covered with β-PbO₂ particles and gave it a large surface area, which also limited the growth of its crystal particles. Compared with the conventional Ti/PbO₂ and Ti/TiO₂NTs/PbO₂ electrode, the Ti/TiO₂NTs/PbO₂-PTFE electrode has enhanced surface hydrophobicity, higher oxygen evolution potential, lower electrochemical impedance, with more active sites, and generate more hydroxyl radicals (·OH), which were enhanced by the addition of PTFE nanoparticles. The electrocatalytic performance of the three electrodes were investigated using dibutyl phthalate (DBP) as the model pollutant. The efficiency of the DBP removal of the three electrodes was in the order: Ti/TiO₂NTs/PbO₂-PTFE > Ti/TiO₂NTs/PbO₂ > Ti/PbO₂. The degradation process followed the pseudo-first-order kinetic model well, with rate constants of 0.1326, 0.1266, and 0.1041 h^-1 for the three electrodes, respectively. The lowest energy consumption (6.1 kWh g^-1) was obtained after 8 h of DBP treatment using Ti/TiO₂NTs/PbO₂-PTFE compared to Ti/TiO₂NTs/PbO₂ (6.7 kWh g^-1) and Ti/PbO₂ (7.4 kWh g^-1) electrodes. Moreover, the effects of current density, initial pH and electrolyte concentration were investigated. Finally, the products of the DBP degradation process were verified based on gas chromatography-mass spectrometry analysis, and possible degradation pathways were described.

Amphiphilic quaternized chitosan: Synthesis, characterization, and anti-cariogenic biofilm property

Hydrophobized chitosan derivatives, hexyl chitosan (HCS), dodecyl chitosan (DCS), and phthaloyl chitosan (PhCS) of approximately 30 and 50% degree of substitution (%DS) reacted with glycidyltrimethylammonium chloride (GTMAC) to incorporate hydrophilic positively charged groups of N-[(2-hydroxyl-3-trimethylammonium)propyl] and yielded amphiphilic quaternized chitosan derivatives. They can assemble into spherical nanoparticles with a hydrodynamic diameter of ~100-300 nm and positive ζ-potential values (+15 to +56). Their anti-biofilm efficacy was evaluated against the dental caries pathogen, Streptococcus mutans. Among all derivatives, the one having 30%DS of hexyl group and prepared by reacting with 1 mol equivalent of GTMAC (H₃₀CS-GTMAC) showed the best performance in terms of its aqueous solubility, the lowest minimum inhibitory concentration (138 μg/mL) and the minimum bactericidal concentration (275 μg/mL) which are superior to the unmodified chitosan. Its equivalent anti-biofilm efficacy to that of chlorhexidine suggests that it can be a greener antibacterial agent for oral care formulations.

Asperosporus subterraneus, a new genus and species of sequestrate Agaricaceae found in Florida nursery production

We describe a novel sequestrate genus and species, Asperosporus subterraneus gen. et sp. nov., found associated with nursery production of ferns in south Florida. This truffle species has a unique combination of morphological characters among described Agaricaceae in that it lacks a stipe or columella, has large, ornamented spores, the fresh sporocarps rapidly stain pink-red when cut or bruised, and they have a rancid smell. Although this fungus does not appear to be a direct plant pathogen, the hyphae of A. subterraneus produce a thick hydrophobic mycelial mat that binds the organic matter and therefore prevents water and fertilizer from being absorbed by plants, consequently causing wilting and chlorosis. Using morphological characteristics and phylogenetic reconstruction based on the internal transcribed spacer (ITS), partial large subunit nuclear ribosomal DNA (LSU), second largest subunit of RNA polymerase II (rpb2) and translation elongation factor 1-alpha (tef1) regions, we describe this taxon as a new genus and species in Agaricaceae.

Composite repair: On the fatigue strength of universal adhesives

OBJECTIVES

To determine whether the composition of universal adhesives and the use of silane coupling agents could affect the fatigue strength of composite repair.

METHODS

Composite samples were aged in water at 37 °C for 90 days and bonded to fresh composite to produce twin-bonded bar-shaped composite specimens (2 × 2 × 12 mm). Five universal adhesives, a multistep composite repair system and a hydrophobic solvent-free resin associated to a separate silane coupling agent application were used for bonding. Composite samples were tested under 4-pointflexure initially at quasi-static loading (n = 12) followed by cyclic loading (n = 25). The stress-life fatigue behavior was evaluated following the staircase method at 4 Hz. The unfractured side of cyclic loaded beams were evaluated under SEM to determine crack initiation sites. Fatigue data was analyzed by ANOVA and Tukey test and Wilcoxon Rank Sum Test (α = 0.05).

RESULTS

Bonding protocols were unable to restore the cohesive strength of the nanofilled composite (p < 0.05). Fatigue testing was more discriminative to reveal discrepancies in composite repair than conventional quasi-static loading. While the composition of universal adhesives affected composite repair potential, the highest endurance limits occurred for the separate silane coupling agent application. Crack propagation sites were mostly located on the aged composite surface.

SIGNIFICANCE

Although a trend for simplification invariably overruns current adhesive dentistry, composite repair using solely universal adhesives may result in inferior repair potential. The additonal use of silane coupling agents remains as an important procedure in composite repairs.

Insights from molecular dynamics simulations of albumin adsorption on hydrophilic and hydrophobic surfaces

Protein adsorption at the surface affects the material biocompatibility directly as it is the first reaction that happens when a foreign material comes in contact with blood. In this study, the mechanism of albumin adsorption on hydrophilic and hydrophobic surfaces is investigated. Although it is studied extensively and has been of keen interest for decades, the adsorptive nature of albumin is still not fully understood with contradicting reported studies. This problem results from previous works focusing on mostly qualitative and quantitative adsorption properties of albumin, rather than the specific interaction mechanisms. The variable local surface properties across albumin can significantly impact adsorption and must be explored. In this work, the effect of hydration is found to significantly increase adsorption with minor reductions. The adsorption of albumin on hydrophilic or hydrophobic surfaces is dependent on albumin orientation, which is dictated by local charge effects. Based on these findings, an optimized material surface is proposed to minimize albumin adsorption using functional groups to limit surface availability for hydrophobic interactions while inhibiting excess electrostatic effects at hydrophilic sites. The extent of albumin adsorption and shape change are characterized herein using the heat capacity. Current study identifies interaction mechanisms previously missing in literature, which are responsible for inconsistent adsorption results.