Photocatalytic activation of peroxydisulfate by UV-LED through rGO/g-C3N4/SiO2 nanocomposite for ciprofloxacin removal: Mineralization, toxicity, degradation pathways, and application for real matrix

If trace amounts of antibiotics remain in the environment, they can lead to microbial pathogens becoming resistant to antibiotics and putting ecosystem health at risk. For instance, ciprofloxacin (CIP) can be found in surface and ground waters, suggesting that conventional water treatment technologies are ineffective at removing it. Now, an rGO/g-C3N4/SiO2 nanocomposite was synthesized in this study to activate peroxydisulfate (PDS) under UVA-LED irradiation. UVA-LED/rGO-g-C3N4-SiO2/PDS system performance was evaluated using Ciprofloxacin as an antibiotic. Particularly, rGO/g-C3N4/SiO2 showed superior catalytic activity for PDS activation to remove CIP. Operational variables, reactive species determination, and mechanisms were investigated. 0.85 mM PDS and 0.3 g/L rGO/g-C3N4/SiO2 eliminated 99.63% of CIP in 35 minutes and mineralized 59.78% in 100 minutes at pH = 6.18. By scavenging free radicals, bicarbonate ions inhibit CIP degradation. According to the trapping experiments, superoxide (O2•-) was the main active species rather than sulfate (SO4•-) and hydroxyl radicals (•OH). RGO/g-C3N4/SiO2 showed an excellent recyclable capability of up to six cycles. The UVA-LED/rGO-g-C3N4-SiO2/PDS system was also tested under real conditions. The system efficiency was reasonable. By calculating the synergistic factor (SF), this work highlights the benefit of combining composite, UVA-LED, and PDS. UVA-LED/rGO-g-C3N4-SiO2/PDS had also been predicted to be an eco-friendly process based on the results of the ECOSAR program. Consequently, this study provides a novel and durable nanocomposite with supreme thermal stability that effectively mitigates environmental contamination by eliminating antibiotics from wastewater.

Gold core@CeO2 halfshell Janus nanocomposites catalyze targeted sulfate radical for periodontitis therapy

The sulfate radical (SO4•-), known for its high reactivity and long lifespan, has emerged as a potent antimicrobial agent. Its exceptional energy allows for the disruption of vital structures and metabolic pathways in bacteria that are usually inaccessible to common radicals. Despite its promising potential, the efficient generation of this radical, particularly through methods involving enzymes and photocatalysis, remains a substantial challenge. Here, we capitalized on the peroxidase (POD)-mimicking activity and photocatalytic properties of cerium oxide (CeO2) nanozymes, integrating these properties with the enhanced concept of plasma gold nanorod (GNR) to develop a half-encapsulated core@shell GNRs@CeO2 Janus heterostructure impregnated with persulfate. Under near-infrared irradiation, the GNRs generate hot electrons, thereby boosting the CeO2's enzyme-like activity and initiating a potent reactive oxygen species (ROS) storm. This distinct nanoarchitecture facilitates functional specialization, wherein the heterostructure and efficient light absorption ensured continuous hot electron flow, not only enhancing the POD-like activity of CeO2 for the production of SO4•- effectively, but also contributing a significant photothermal effect, disrupting periodontal plaque biofilm and effectively eradicating pathogens. Furthermore, the local temperature elevation synergistically enhances the POD-like activity of CeO2. Transcriptomics analysis, as well as animal experiments of the periodontitis model, have revealed that pathogens undergo genetic information destruction, metabolic disorders, and pathogenicity changes in the powerful ROS system, and profound therapeutic outcomes in vivo, including anti-inflammation and bone preservation. This study demonstrated that energy transfer to augment nanozyme activity, specifically targeting ROS generation, constitutes a significant advancement in antibacterial treatment.

Hollow CoP/carbon as an efficient catalyst for the peroxymonosulfate activation derived from phytic acid assisted metal-organic framework

The catalyst's composition and rationally designed structure is significantly interlinked with its performance for wastewater remediation. Here, a novel hollow cobalt phosphides/carbon (HCoP/C) as an efficient catalyst for activating peroxymonosulfate (PMS) was prepared. The ZIF-67 was synthesized first, followed by phytic acid (PA) etching and then heat treatment was used to get HCoP/C. The PA was used as an etching agent and a source of phosphorus to prepare HCoP/C. To analyze catalytic performance, another solid cobalt phosphides/carbon (SCoP/C) catalyst was prepared for comparison. In contrast to SCoP/C, the HCoP/C exhibited higher catalytic efficiency when used to activate PMS to degrade Bisphenol A (BPA). The results showed that about 98 % of targeted pollutant BPA was removed from the system in 6 min with a rate constant of 0.78 min-1, which was 4 times higher than the solid structure catalyst. The higher catalytic performance of HCoP/C is attributed to its hollow structure. In the study, other parameters such as BPA concentration, temperature, pH, and different catalyst amount were also tested. Moreover, the electron paramagnetic resonance (EPR) and radical quenching analysis confirmed that sulfate radicals were dominant in the HCoP/C/PMS system.

Electron transfer mediated photo-Fenton-like synergistic catalysis of Fe,Cu-doped MIL-101 coupled with Ag3PO4: Quantitative evaluation and DFT calculations

Widespread use of tetracycline (TC) results in its persistent residue and bioaccumulation in aquatic environments, posing a high toxicity to non-target organisms. In this study, a bimetal-doped composite material Ag3PO4/MIL-101(Fe,Cu) has been designed for the treatment of TC in aqueous solutions. As the molar ratio of Fe/Cu in composite is 1:1, the obtained material AP/MFe1Cu1 is placed in an aqueous environment under visible light irradiation in the presence of 3 mM peroxydisulfate (PDS), which forms a photo-Fenton-like catalytic system that can completely degrade TC (10 mg/L) within 60 min. Further, the degradation rate constant (0.0668 min-1) is 5.66 and 7.34 times higher than that of AP/MFe and AP/MCu, respectively, demonstrating a significant advantage over single metal-doped catalysts. DFT calculations confirm the strong adsorption capacity and activation advantage of PDS on the composite surface. Therefore, the continuous photogenerated electrons (e-) accelerate the activation of PDS and the production of SO4•-, resulting in the stripping of abundant photogenerated h + for TC oxidation. Meanwhile, the internal circulation of FeⅢ/FeⅡ and CuⅡ/CuⅢ in composite also greatly enhances the photo-Fenton-like catalytic stability. According to the competitive dynamic experiments, SO4•- have the greatest contribution to TC degradation (58.93%), followed by 1O2 (23.80%). The degradation intermediates (products) identified by high-performance liquid chromatography-mass spectrometry (HPLC/MS) technique indicate the involvement of various processes in TC degradation, such as dehydroxylation, deamination, N-demethylation, and ring opening. Furthermore, as the reaction proceeds, the toxicity of the intermediates produced during TC degradation gradually decreases, which can ensure the safety of the aquatic ecosystem. Overall, this work reveals the synergy mechanism of PDS catalysis and photocatalysis, as well as provides technical support for removal of TC-contaminated wastewater.

Underestimated role of hydroxyl radicals for bromate formation in persulfate-based advanced oxidation processes

In persulfate-based advanced oxidation processes (PS-AOPs), sulfate radicals (SO4•-) have been recognized to play more important roles in inducing bromate (BrO3-) formation rather than hydroxyl radicals (HO•) because of the stronger oxidation capacity of the former. However, this study reported an opposite result that HO• indeed dominated the formation of bromate instead of SO4•-. Quenching experiments were coupled with electron paramagnetic resonance (EPR) detection and chemical probe identification to elucidate the contributions of each radical species. The comparison of different thermal activated persulfates (PDS and PMS) demonstrated that the significant higher bromate formation in HEAT/PMS ([BrO3-]/[Br-]0 = 0.8), as compared to HEAT/PDS ([BrO3-]/[Br-]0 = 0.2), was attributable to the higher concentration of HO• radicals in HEAT/PMS. Similarly, the bromate formation in UV/PDS ([BrO3-]/[Br-]0 = 1.0), with a high concentration of HO•, further underscored the dominant role of HO•. As a result, we quantified that HO• and SO4•- radicals accounted 66.7% and 33.3% for bromate formation. This controversial result can be reconciled by considering the critical intermediate, hypobromic acid/hypobromate (HOBr/BrO-), involved in the transformation of Br- to BrO3-. HO• radicals have the chemical preference to induce the formation of HOBr/BrO- intermediates (contributing ∼ 60%) relative to SO4•- radicals (contributing ∼ 40%). This study highlighted the dominant role of HO• in the formation of bromate rather than SO4•- in PS-AOPs and potentially offered novel insights for reducing disinfection byproduct formation by controlling the radical species in AOPs.

Simultaneous removal of antibiotic resistance genes and improved dewatering ability of waste activated sludge by Fe(II)-activated persulfate oxidation

Waste activated sludge properties vary widely with different regions due to the difference in living standards and geographical distribution, making a big challenge to developing a universally effective sludge dewatering technique. The Fe(II)-activated persulfate (S2O82-) oxidation process shows excellent ability to disrupt sludge cells and extracellular polymeric substances (EPS), and release bound water from sludge flocs. In this study, the discrepancies in the physicochemical characteristics of sludge samples from seven representative cities in China (e.g., dewaterability, EPS composition, surface charge, microbial community, relative abundance of antibiotic resistance genes (ARGs), etc.) were investigated, and the role of Fe(II)-S2O82- oxidation in enhancing removal of antibiotic resistance genes and dewatering ability were explored. The results showed significant differences between the EPS distribution and chemical composition of sludge samples due to different treatment processes, effluent sources, and regions. The Fe(II)-S2O82- oxidation pretreatment had a good enhancement of sludge dewatering capacity (up to 76 %). Microbial analysis showed that the microbial community in each sludge varied significantly depending on the types of wastewater, the wastewater treatment processes, and the regions, but Fe(II)-S2O82- oxidation was able to attack and rupture the sludge zoogloea indiscriminately. Genetic analysis further showed that a considerable number of ARGs were detected in all of these sludge samples and that Fe(II)-S2O82- oxidation was effective in removing ARGs by higher than 90 %. The highly active radicals (e.g., SO4-·, ·OH) produced in this process caused drastic damage to sludge microbial cells and DNA stability while liberating the EPS/cell-bound water. Co-occurrence network analysis highlighted a positive correlation between population distribution and ARGs abundance, while variations in microbial communities were linked to regional differences in living standards and level of economic development. Despite these variations, the Fe(II)-S2O82- oxidation consistently achieved excellent performance in both ARGs removal and sludge dewatering. The significant modularity of associations between different microbial communities also confirms its ability to reduce horizontal gene transfer (HGT) by scavenging microbes.

Advanced degradation of organic pollutants using sonophotocatalytic peroxymonosulfate activation with CoFe2O4/Cu- and Ce-doped SnO2 composites

The rampant upsurge of organic pollutants in aqueous media has become one of the major concerns nowadays. Finding non-specific catalysts that can target a wide range of organic pollutants is a key challenge. Eco-friendly oxidative radicals, such as promoted by peroxymonosulfate (PMS), are necessary for efficient water decontamination. We propose a multicomponent composite catalyst for activating PMS using a dual strategy of sonophotocatalysis. The composite integrates cobalt ferrite and Cu- or Ce-doped SnO2, with the at. % of doping metal and the mixture ratio carefully balanced. The top-performing architectures were able to decompose rhodamine B (20 ppm), a representative pollutant, in under 3 min and achieve over 70% mineralization in just 5 min. The synthesized nanocomposites demonstrated exceptional sonophotocatalytic performance, even when treating complex and diverse multipollutant solutions (80 ppm), achieving over 75% mineralization after 150 min. Considering their high stability and reusability, the proposed CoFe2O4/Cu- and Ce-doped SnO2 materials are among the state-of-the-art heterogeneous catalysts for mineralizing organic pollutants through PMS activation.

Catalyst-free persulfate activation by UV/visible radiation for secondary urban wastewater disinfection

This study focuses on the treatment of secondary urban wastewater (W) to improve the effluent quality aiming at the reduction of pathogenic microorganisms for the safe reuse of the treated wastewater (TW). Catalyst-free persulfate activation by radiation-based oxidation was applied as a treatment technology. A parametric study was carried out to select the best operating conditions. Total enterobacteria inactivation (quantified by the log reduction (CFU/100 mL)) was achieved when using [S2O82-] = 1 mM, pH = 8.5 (natural pH of W), T = 25 °C, and I = 500 W/m2. However, storing TW for 3 days promoted the regrowth of bacteria, risking its reutilization. Therefore, in this study, and for the first time, the potential beneficial role of inoculation of wastewater treated by the radiation-activated persulfate process with a diverse bacterial community was evaluated in order to control the regrowth of potentially harmful microorganisms through bacterial competition. For this, TW was diluted with river water (R) in the volume percentages of 5, 25, and 50 (percentages refer to R content), and enterobacteria and total heterotrophs were enumerated before and after storage for 72 h. The results showed total heterotrophs and enterobacteria regrowth for TW and R + TW diluted 5 and 25% after storage. However, for R + TW diluted 50%, only the total heterotrophs regrew. Hence, the treated wastewater generated by the oxidative process diluted with 50% river water complies with the legislated limits for reuse in urban uses or irrigation.

Degradation of Levofloxacin by a green zero-valent iron-loaded carbon composite activating peroxydisulfate system: Reactivity, products and mechanism

In this study, a green zero-valent iron-loaded carbon composite (ZVI-SCG) was synthesized using coffee grounds and FeCl3 solution through two-steps method, and the synthesized ZVI-SCG was used in the activation of peroxydisulfate (PDS) to degrade Levofloxacin (LEX). Results revealed that ZVI-SCG exhibited a great potential for LEX removal by adsorption and catalytic degradation in the ZVI-SCG/PDS system, and 99% of LEX was removed in the ZVI-SCG/PDS system within 60 min. ZVI-SCG/PDS system showed a high reactivity toward LEX degradation under realistic environmental conditions. Also, the ZVI-SCG/PDS system could effectively degrade several quinolone antibiotics including gatifloxacin, ciprofloxacin and LEX in single and simultaneous removal modes. A potential reaction mechanism of LEX degradation by ZVI-SCG/PDS system was proposed, SO4•-, HO•, O2•- and 1O2 involved in radical and non-radical pathways took part in catalytic degradation of LEX by ZVI-SCG/PDS system, but HO• might be the main reactive species for LEX degradation. The possible degradation pathway of LEX was also proposed based on the identified ten intermediate products, LEX degradation was successfully achieved through decarboxylation, opening ring and hydroxylation processes. The potential toxicity of LEX and its oxidation products decreased significantly after treatment. This study provides a promising strategy of water treatment for the antibiotics-containing wastewater.

Facile synthesis of NaA zeolite supported Co2Fe1 for highly efficient degradation of Acid Orange 7 by activation of peroxymonosulfate

The development of heterogeneous Co-based catalysts with an effective combination mode of Co/Fe and supporter, a facile synthetic method, and a low treatment cost is an important environment challenge for azo dyes degradation by peroxymonosulfate (PMS) activation. In this study, NaA zeolite supported CoxFey with various molar ratio of Fe/Si and Co/Fe was synthesized by a facile hydrothermal process, and used to activate PMS for Acid Orange 7 (AO7) degradation. NaA zeolite supported Co2Fe1 with the Fe/Si molar ratio of 1:10 showed superior catalytic performance compared with other NaA zeolite supported CoxFey. In a system containing 0.6 g/L catalysts, 4 mM PMS, pH 5 and T = 30℃, 95.8% AO7 and 79.1% COD conversion could be achieved at 20 and 60 min, respectively, and the first order kinetic rate constant reached 0.14795 min-1. Moreover, NaA zeolite supported Co2Fe1/PMS system exhibited excellent catalytic effect in a wide pH range of 3-9. Temperature had an obvious effect on AO7 degradation, and the activation energy was 31.36 kJ/mol. HCO3- demonstrated an obvious depression on AO7 degradation, while Cl-, SO42- and H2PO4- had a relatively poor impact. Quenching experiments showed that both sulfate radicals ([Formula: see text]) and hydroxyl radicals (·OH) were generated in the PMS reaction system, and the [Formula: see text] was the dominant active radical. During 3 cycles experiments, an acceptable AO7 conversion ratio (91.8%) within 30 min arrived, suggesting the good stability of NaA zeolite supported Co2Fe1.

Single and multi-antibiotics removal via peroxymonosulfate activation using molybdenum disulfide (MoS2): Central composite design and degradation pathway

The efficacy of molybdenum disulfide (MoS2) for the degradation of metronidazole (MET), tetracycline (TET), and ciprofloxacin (CIP) in single and multicomponent systems through peroxymonosulfate (PMS) activation was investigated. Several characterization techniques, such as SEM, XRD, XPS, and EPR were performed to understand the removal mechanism of the three antibiotics in PMS/MoS2 system. In single component system with an initial antibiotic concentration of 10 mg L-1, >95% removal of MET, TET, and CIP were observed within 60 min (PMS = 100 mg L-1; MoS2 = 0.5 g L-1). It was observed that sulfate radical (SO4.-) and reactive ≡Mo- OOSO3- complex played a major role in the removal of antibiotics. Adsorption on MoS2 and direct oxidation by PMS contributed to the removal of TET and CIP in MoS2/PMS system. A Central composite design (CCD) with response surface methodology (RSM) was used to model the removal of MET, TET, and CIP in a multi-antibiotic system. The presence of multiple antibiotics affected the performance of MoS2/PMS system as antibiotics competed for the adsorption sites on MoS2 and the generated reactive species. CIP predominantly deterred the removal of both MET and TET. On the other hand, MET removal was decreased up to 25-40% in the presence of both TET and CIP. Similarly, TET removal decreased up to 15-20% in the presence of MET and CIP. CIP removal decreased up to 15-25% in the presence of MET and TET. In the presence of multiple antibiotics, the deterring effect of one pollutant over another can be overcome by increasing the MoS2 concentration above 1200 mg L-1 and PMS above 200 mg L-1 to obtain 100% removal of all three pollutants. Overall, MoS2 could be an ideal catalyst for the removal of antibiotics through PMS activation.

Elucidating sulfate radical-induced oxidizing mechanisms of solid-phase pharmaceuticals: Comparison with liquid-phase reactions

As a class of organic micropollutants of global concern, pharmaceuticals have prevalent distributions in the aqueous environment (e.g., groundwater and surface water) and solid matrices (e.g., soil, sediments, and dried sludge). Their contamination levels have been further aggravated by the annually increased production of expired drugs as emerging harmful wastes worldwide. Sulfate radicals (SO4•-)-based oxidation has attracted increasing attention for abating pharmaceuticals in the environment, whereas the transformation mechanisms of solid-phase pharmaceuticals remain unknown thus far. This investigation presented for the first time that SO4•-, individually produced by mechanical force-activated and heat-activated persulfate treatments, could effectively oxidize three model pharmaceuticals (i.e., methotrexate, sitagliptin, and salbutamol) in both solid and liquid phases. The high-resolution mass spectrometric analysis suggested their distinct transformation products formed by different phases of SO4•- oxidation. Accordingly, the SO4•--mediated mechanistic differences between the solid-phase and liquid-phase pharmaceuticals were proposed. It is noteworthy that the products from both systems were predicted with the remaining persistence, bioaccumulation, and multi-endpoint toxicity. Therefore, some post-treatment strategies need to be considered during practical applications of SO4•--based technologies in remediating different phases of micropollutants. This work has environmental implications for understanding the comparative transformation mechanisms of pharmaceuticals by SO4•- oxidation in remediating the contaminated solid and aqueous matrices.

The role of reactive phosphate species in the abatement of micropollutants by activated peroxymonosulfate in the treatment of phosphate-rich wastewater

This study investigated the mechanisms of forming reactive species to degrade micropollutants through the activation of peroxymonosulfate (PMS) by phosphate, a prevalent ion in wastewater. Considering the density functional theory results, the formation of hydrogen bonds between phosphate and PMS molecules might be the crucial step in the overall reactions, which prefers producing ⋅OH and reactive phosphate species (RPS, namely H2PO4⋅, HPO4⋅-, and PO4⋅2-) to yielding SO4⋅-. Besides, in the phosphate (5 mM)/PMS system at pH = 8, HPO4⋅- was modeled to be the dominant radical with a steady-state concentration of 3.6 × 10-12 M, which was 666 and 773 times higher than those of ⋅OH and SO4⋅-. The contributions of 1O2, ⋅OH, SO4⋅-, and RPS to the micropollutant decomposition in phosphate/PMS were studied, and RPS were found to be selective for micropollutants with electron-donating moieties (such as phenolic and aniline groups). Additionally, the degradation pathways of bisphenol A, diclofenac, ibuprofen, and atrazine in phosphate/PMS were proposed according to the detected transformation products. Cytotoxicity analysis was carried out to evaluate the potential environmental impacts resulting from the degradation of micropollutants by phosphate/PMS. This study confirmed the significance of RPS for micropollutant degradation during PMS-based treatment in phosphate-rich scenarios.

Effective degradation of tetracycline via persulfate activation using silica-supported zero-valent iron: process optimization, mechanism, degradation pathways and water matrices

Pure zero-valent iron (ZVI) was supported on silica and starch to enhance the activation of persulfate (PS) for tetracycline degradation. The synthesized catalysts were characterized by microscopic and spectroscopic methods to assess their physical and chemical properties. High tetracycline removal (67.55%) occurred using silica modified ZVI (ZVI-Si)/PS system due to the improved hydrophilicity and colloidal stability of ZVI-Si. Incorporating light into the ZVI-Si/PS system improved the degradation performance by 9.45%. Efficient degradation efficiencies were recorded at pH 3-7. The optimum operating parameters determined by the response surface methodology were PS concentration of 0.22 mM, initial tetracycline concentration of 10 mg/L, and ZVI-Si dose of 0.46 g/L, respectively. The rate of tetracycline degradation declined with increasing tetracycline concentration. The degradation efficiencies of tetracycline were 77%, 76.4%, 75.7%, 74.5%, and 73.75% in five repetitive runs at pH 7, 20 mg/L tetracycline concentration, 0.5 g/L ZVI-Si dose, and 0.1 mM PS concentration. The degradation mechanism was explained, and sulfate radicals were the principal reactive oxygen species. The degradation pathway was proposed based on liquid chromatography-mass spectroscopy. Tetracycline degradation was favorable in distilled and tap water. The ubiquitous presence of inorganic ions and dissolved organic matter in the lake, drain, and seawater matrices interfered with the tetracycline degradation. The high reactivity, degradation performance, stability, and reusability of ZVI-Si substantiate the potential practical application of this material for the degradation of real industrial effluents.

UV-activated persulfates oxidation of anthraquinone dye: Kinetics and ecotoxicological assessment

Sulfate radical-based advanced oxidation processes (SR-AOPs) are gaining popularity as a feasible alternative for removing recalcitrant pollutants in an aqueous environment. Persulfates, namely peroxydisulfate (PDS) and peroxymonosulfate (PMS) are the most common sulfate radical donors. Persulfates activation by ultraviolet (UV) irradiation is considered feasible due to the high concentration of radicals produced as well as the lack of catalysts leaching. The research focuses on determining the impact of activated PDS and PMS on the degradation of anthraquinone dye, i.e., Acid Blue 129 (AB129). UV-activated PDS and PMS can quickly degrade the AB129 as well as restrict the formation of by-products. This could explain the reduced ecotoxicity levels of the treated water after degradation, using an aquatic plant (Lemna minor) and a crustacean (Daphnia magna). This, on the other hand, can ensure that the sulfate radical-based processes can be an environmentally friendly technology.

Molecular structure-dependent contribution of reactive species to organic pollutant degradation using nanosheet Bi2Fe4O9 activated peroxymonosulfate

Iron-based catalysts have attracted increasing attention in heterogeneous activation of peroxymonosulfate (PMS). However, the activity of most iron-based heterogenous catalysts is not satisfactory for practical application and the proposed activation mechanisms of PMS by iron-based heterogenous catalyst vary case by case. This study prepared Bi₂Fe₄O₉ (BFO) nanosheet with super high activity toward PMS, which was comparable to its homogeneous counterpart at pH 3.0 and superior to its homogeneous counterpart at pH 7.0. Fe sites, lattice oxygen and oxygen vacancies on BFO surface were believed to be involved in the activation of PMS. By using electron paramagnetic resonance (EPR), radical scavenging tests, ⁵⁷Fe Mössbauer and ¹⁸O isotope-labeling technique, the generation of reactive species including sulfate radicals, hydroxyl radicals, superoxide and Fe (IV) were confirmed in BFO/PMS system. However, the contribution of reactive species to the elimination of organic pollutants very much depends on their molecular structure. The effect of water matrices on the elimination of organic pollutants also hinges on their molecular structure. This study implies that the molecular structure of organic pollutants governs their oxidation mechanism and their fate in iron-based heterogeneous Fenton-like system and further broadens our knowledge on the activation mechanism of PMS by iron-based heterogeneous catalyst.

Hydrodynamic cavitation coupled with zero-valent iron produces radical sulfate radicals by sulfite activation to degrade direct red 83

In the present research, hydrodynamic cavitation (HC) and zero-valent iron (ZVI) were used to generate sulfate radicals through sulfite activation as a new source of sulfate for the efficient degradation of Direct Red 83 (DR83). A systematic analysis was carried out to examine the effects of operational parameters, including the pH of the solution, the doses of ZVI and sulfite salts, and the composition of the mixed media. Based on the results, the degradation efficiency of HC/ZVI/sulfite is highly dependent upon the pH of the solution and the dosage of both ZVI and sulfite. Degradation efficiency decreased significantly with increasing solution pH due to a lower corrosion rate for ZVI at high pH. The corrosion rate of ZVI can be accelerated by releasing Fe2+ ions in an acid medium, reducing the concentration of radicals generated even though ZVI is solid/originally non-soluble in water. The degradation efficiency of the HC/ZVI/sulfite process (95.54 % + 2.87%) was found to be significantly higher under optimal conditions than either of the individual processes (<6% for ZVI and sulfite and 68.21±3.41% for HC). Based on the first-order kinetic model, the HC/ZVI/sulfite process has the highest degradation constant of 0.035±0.002 min-1. The contribution of radicals to the degradation of DR83 by the HC/ZVI/sulfite process was 78.92%, while the contribution of SO4•- and •OH radicals was 51.57% and 48.43%, respectively. In the presence of HCO3- and CO32- ions, DR83 degradation is retarded, whereas SO42- and Cl- ions promote degradation. To summarise, the HC/ZVI/sulfite treatment can be viewed as an innovative and promising method of treating recalcitrant textile wastewater.

Cobalt oxide functionalized ceramic membrane for 4-hydroxybenzoic acid degradation via peroxymonosulfate activation

Membrane separation and sulfate radicals-based advanced oxidation processes (SR-AOPs) can be combined as an efficient technique for the elimination of organic pollutants. The immobilization of metal oxide catalysts on ceramic membranes can enrich the membrane separation technology with catalytic oxidation avoiding recovering suspended catalysts. Herein, nanostructured Co₃O₄ ceramic catalytic membranes with different Co loadings were fabricated via a simple ball-milling and calcination process. Uniform distribution of Co₃O₄ nanoparticles in the membrane provided sufficient active sites for catalytic oxidation of 4-hydroxybenzoic acid (HBA). Mechanistic studies were conducted to determine the reactive radicals and showed that both SO₄^•- and ^•OH were present in the catalytic process while SO₄^•- plays the dominant role. The anti-fouling performance of the composite Co@Al₂O₃ membranes was also evaluated, showing that a great flux recovery was achieved with the addition of PMS for the fouling caused by humic acid (HA).

Degradation of 2,4-diclorophenol via coupling zero valent iron and hydrodynamic cavitation for sulfite activation: A turbulence modeling

The 2,4-dichlorophenol (2,4-DCP) is an important chemical precursor that can affect human endocrine system and induce pathological symptoms. This research reports the degradation of 2,4-DCP using lab-scale hydrodynamic cavitation (HC) approach, which is considered a green and effective method. To promote the degradation efficiency, the zero-valent iron (Fe⁰) as the catalyst for sulfate radical (SO₄^•-) generation via activation of sulfite (SO₃^2-) salts was simultaneously used. Degradation efficiency was favorable in acidic pH than the alkaline pH due to higher production of active radicals and was dependent on the dose of Fe⁰ and SO₃^2-. Under optimal condition, degradation efficiency by Fe⁰/HC/sulfite (96.67 ± 2.90%) was considerably enhanced compared to HC alone (45.37 ± 2.26%). Quenching experiments suggested that SO₄^•-, ^•OH, ¹O₂, and O₂^•- radicals were involved in the degradation of 2,4-DCP by Fe⁰/HC/sulfite process, but the dominant role was related to ^•OH (70.09% contribution) and SO₄^•- (29.91% contribution) radicals. From the turbulence model, turbulent pressure at venturi throat decreased from -0.42 MPa to -2.02 MPa by increasing the inlet pressure from 1.0 to 4.0 bar and increase in pressure gradient has intensified bubble collapse due to higher turbulence tension.

Evaluation of the disinfection effect and mechanism of SO4•- and HO• UV/persulfate salts

Although ultraviolet (UV) and persulfate (PS) have been widely used in water disinfection process, their incompleteness of disinfection, such as inducing the production of viable but non-culturable cells (VBNC), has attracted extensive attention. In this study, the disinfection effect of combined UV and PS was evaluated, and the roles of SO₄^•- and HO^• radicals in UV/PS disinfection were also analyzed. UV/PS more effectively inactivated cells and reduced the number of culturable cells. Also, the test of bacterial dark activation suggested that UV/PS disinfection inhibited the recovery of VBNC bacteria. The mechanisms of UV/PS disinfection were the increase of membrane permeability and oxidative stress, where SO₄^•- radicals played more role than HO^• radicals. Furthermore, UV/PS disinfection more significantly perturbed the metabolism of Pseudomonas aeruginosa (p < 0.05), mainly involving glyoxylate and dicarboxylic acid metabolism, aminoacyl-tRNA biosynthesis, Alanine, aspartate and glutamate metabolism, and citric acid cycle (TCA cycle). In short, UV/PS disinfection can not only significantly reduce the number of culturable bacteria (kill bacteria) but also inhibits the recovery of VBNC bacteria.

Utility and mechanism of magnetic nano-MnFe2O4/MWNT activation for oxidative degradation of tetracycline by persulfate

A magnetic MnFe₂O₄/MWNT nanocomposite activated with sodium persulfate (PDS) was investigated for the removal of the widely used antibiotic tetracycline (TC). The best-performing 80 wt.% MnFe₂O₄/MWNT nanocomposite was screened for catalytic degradation of TC by comparing the catalytic and adsorption processes. The nanocomposite was evaluated using a series of physical characterizations. The effects of catalyst dosage, PDS dosage, temperature, initial pH, and initial concentration of TC on TC removal were investigated. After the reaction for 90 min, the addition of 4 mM PDS to the 80 wt.% MnFe₂O₄/CNT catalyst at 0.5 g/L degraded 78.85% of TC and 51.97% of TOC at an initial TC concentration of 40 mg/L. The reusability of MnFe₂O₄/MWNT nanocomposite was evaluated and the structural stability of the material was verified. It was demonstrated that multiple active species (SO₄^-, ·OH, ·O₂^-, ¹O₂) were produced in the MnFe₂O₄/MWNT/PDS system. The catalytic mechanism was analyzed based on the XPS results. Total organic carbon (TOC) measurement indicated partial TC had completely mineralized. The presumable degradation pathway of TC was proposed according to intermediate products by the LC-MS method.

Remediation of environmentally persistent organic pollutants (POPs) by persulfates oxidation system (PS): A review

Over the past few years, persistent organic pollutants (POPs) exhibiting high ecotoxicity have been widely detected in the environment. Persulfate-oxidation hybrid system is one of the most widely used novel advanced oxidation techniques and is based on the persulfate generation of SO₄^-∙ and ∙OH from persulfate to degrade POPs. The overarching aim of this work is to provide a critical review of the variety of methods of peroxide activation (e.g., light activated persulfate, heat-activated persulfate, ultrasound-activated persulfate, electrochemically-activated persulfate, base-activated persulfate, transition metal activated persulfate, as well as Carbon based material activated persulfate). Specifically, through this article we make an attempt to provide the important characteristics and uses of main activated PS methods, as well as the prevailing mechanisms of activated PS to degrade organic pollutants in water. Finally, the advantages and disadvantages of each activation method are analyzed. This work clearly illustrates the benefits of different persulfate activation technologies, and explores persulfate activation in terms of Sustainable Development Goals, technical feasibility, toxicity assessment, and economics to facilitate the large-scale application of persulfate technologies. It also discusses how to choose the most suitable activation method to degrade different types of POPs, filling the research gap in this area and providing better guidance for future research and engineering applications of persulfates.

Effect of metal doping (Me = Zn, Cu, Co, Mn) on the performance of bismuth ferrite as peroxymonosulfate activator for ciprofloxacin removal

In this study, a facile hydrothermal method was employed to prepare Me-doped Bi₂Fe₄O₉ (Me = Zn, Cu, Co, and Mn) as peroxymonosulfate (PMS) activator for ciprofloxacin (CIP) degradation. The characteristics of the Me-doped bismuth ferrites were investigated using various characterization instruments including SEM, TEM, FTIR and porosimeter indicating that the Me-doped Bi₂Fe₄O₉ with nanosheet-like square orthorhombic structure was successfully obtained. The catalytic activity of various Me-doped Bi₂Fe₄O₉ was compared and the results indicated that the Cu-doped Bi₂Fe₄O₉ at 0.08 wt.% (denoted as BFCuO-0.08) possessed the greatest catalytic activity (k_app = 0.085 min^-1) over other Me-doped Bi₂Fe₄O₉ under the same condition. The synergistic interaction between Cu, Fe and oxygen vacancies are the key factors which enhanced the performance of Me-doped Bi₂Fe₄O₉. The effects of catalyst loading, PMS dosage, and pH on CIP degradation were also investigated indicating that the performance increased with increasing catalyst loading, PMS dosage, and pH. Meanwhile, the dominant reactive oxygen species was identified using the chemical scavengers with SO₄^•-, ^•OH, and ¹O₂ playing a major role in CIP degradation. The performance of BFCuO-0.08 deteriorated in real water matrix (tap water, river water and secondary effluent) due to the presence of various water matrix species. Nevertheless, the BFCuO-0.08 catalyst possessed remarkable stability and can be reused for at least four successive cycles with >70% of CIP degradation efficiency indicating that it is a promising catalyst for antibiotics removal.

Escherichia coli inactivation in water by sulfate radical-based oxidation process using FeCl3-activated biochar/persulfate system

Pathogenic microbes in water present great risks to environments, water resources, and human health. In the present study, for the first time, a FeCl₃-activated bermudagrass-derived biochar (FA-BC) was applied to activate persulfate (PS) for E. coli inactivation. The PS activation was ascribed to the presence of Fe⁰ and Fe₃O₄ on the surface of FA-BC, and SO₄^·- radicals were proved to be the main role for E. coli inactivation using FA-BC activated PS system (FA-BC/PS). Decreasing the pH (5-9) and increasing the PS concentration (50-300 mg/L), reaction temperature (20-50 °C), and FA-BC dosage (100-500 mg/L) resulted in the enhancement of disinfection efficiency of E. coli using FA-BC/PS. 6.21 log reductions of E. coli were achieved within 20 min under the optimal conditions (500 mg/L FA-BC, 200 mg/L PS, pH 7, and 20 °C with 10⁷ CFU/mL E. coli in DI water). The FA-BC/PS effectively eliminated various initial concentrations of E. coli (10⁵-10⁸ CFU/mL). The E. coli inactivation rate decreased from 0.1426 min^-1 to 0.0883, 0.1268 min^-1, and 0.1093 min^-1 with the presence of 10 mg/L humic acid, 100 mg/L Cl^-, and 100 mg/L HCO₃^-, respectively. In addition, after three cycles of disinfection tests using FA-BC/PS, the E. coli inactivation rate only slightly decreased from 0.1426 to 0.1288 min^-1. The FA-BC/PS also effectively removed the E. coli in real stormwater with a 99.2 % inactivation efficiency within 180 min. The FA-BC/PS in fixed-bed column tests revealed the continuous and high inactivation of E. coli in water. Increasing the FA-BC amount (1.5 %-5 %) and PS concentration (50-200 mg/L) and decreasing the flow rate (2-4 mL/min) caused the lower E. coli concentration in effluent. Therefore, the FA-BC/PS can be considered as a promising and efficient technique for water disinfection.

Thermally activated persulfate oxidation of ampicillin: Kinetics, transformation products and ecotoxicity

The heat-activated persulfate system showed encouraging results for the destruction of the widely used antibiotic Ampicillin (AMP). AMP removal follows exponential decay, and the observed kinetic constant was enhanced with persulfate (PS) dosage at the range 50-500 mg L^-1 and temperature (40-60 °C), while AMP thermolysis at 60 °C was almost negligible. The apparent activation energy was estimated to 124.7 kJ mol^-1_. Alkaline conditions, water matrix constituents like bicarbonates, humic acid, and real water matrices retarded AMP oxidation. Experiments performed with tert-butanol and methanol as scavengers demonstrated the contribution of sulfate radicals as the dominant reactive species. Seven transformation products (TPs) of AMP have been identified from AMP destruction. An EC₅₀ value equal to 187 mg L^-1 was calculated for 72 h of exposure of the microalgae Chlorella sorokiniana to AMP. According to the ecotoxicity experiments that conducted after treatment of AMP with PS for different reaction times, no important inhibition of microalgae was noticed for contact time of 72 h and 10 d. These results indicate the formation of no toxic AMP by-products for the applied experimental conditions.

Promotional effect of Ca doping on Bi2Fe4O9 as peroxymonosulfate activator for gatifloxacin removal

A series of Ca-doped bismuth ferrite was prepared at various %w/w of Ca via a facile hydrothermal method to obtain Bi_2XCa_2(1-X)Fe₄O₉ (denoted as BFOCa-X, where X = 1, 0.95, 0.90, 0.80, 0.50). The BFOCa-X catalysts were characterized, and the results showed that they consist of pure phase BFO with nanosheet-like morphology. The as-prepared BFOCa-X catalysts were used as peroxymonosulfate (PMS) activator for gatifloxacin (GAT) removal. It was found that the catalytic activity decreased in the following order: BFOCa-0.8 (90.2% GAT removal efficiency in 45 min, k_app = 0.084 min^-1)>BFOCa-0.95 > BFOCa-0.9 > BFOCa-0.5 > BFO indicating that BFOCa-0.8 has the optimized active sites for catalysis. The Ca dopant contributed to the increased oxygen vacancies and surface hydroxyl groups, promoting the catalytic PMS activation process. The k_app value increased gradually with increasing catalyst loading and PMS dosage while pH 9 presented the highest GAT removal rate. The GAT degradation rate was inhibited by PO₄³-, humic acid and NH₄⁺ but promoted in the presence of Cl-, NO₃- and HCO₃-. It was also found that the GAT can undergo several degradation pathways in the catalytic PMS system, which eventually mineralized into innocuous compounds. The dominant reactive oxygen species (ROS) were identified using chemical scavengers, revealing that SO₄^•-, ¹O₂ and ^•OH contributed significantly to GAT degradation. Based on the XPS study, PMS was activated by the Fe²⁺/Fe³⁺ redox cycling and oxygen vacancies to produce SO₄^•-/^•OH and ¹O₂, respectively. Overall, the BFOCa-0.8 also showed excellent reusability up to at least 4 cycles with low Bi and Fe leaching (<7 and 62 μg L^-1, respectively), indicating that it has promising potential for application as PMS activator for antibiotics removal.

The journey of toluene to complete mineralization via heat-activated peroxydisulfate in water: intermediates analyses, CO2 monitoring, and carbon mass balance

Our study has thoroughly investigated the complete mineralization of toluene in water via heat-activated peroxydisulfate (PDS) by: (1) monitoring concentrations/peak areas of various intermediates and CO₂ throughout the reaction period and (2) identifying water-soluble and methanol-soluble intermediates, including trimers, dimers, and organo-sulfur compounds, via non-target screening using high-resolution mass spectrometry. Increased temperature and PDS dosage enhanced toluene removal/mineralization kinetics and increased the rate/extent of benzaldehyde formation and its further transformation. Artificial groundwater and phosphate buffer minimally impacted toluene removal but significantly decreased benzaldehyde formation, indicating a shift in transformation pathways. The stoichiometric PDS dose (18 mM at 40 °C) was adequate to completely mineralize toluene (1 mM), with < 10% PDS needed to transform toluene to intermediates. Toluene transformation to intermediates occurred in 47 h (k_obs,toluene = 0.594 h^-1) whereas 564 h were required for complete mineralization (k_obs,CO2 = 0.0038 h^-1). O₂ accumulated once mineralization neared completion. A carbon mass balance, including quantification of nine intermediates and CO₂ throughout the transformation period, showed that unquantified/unknown intermediates (including yellowish-white precipitates) reached as high as 80% of total carbon before transformation to CO₂. Possible toluene transformation pathways via hydroxylation, sulfate addition, and oxidative coupling are proposed.

Quantification of the diverse inhibitory effects of dissolved organic matter on transformation of micropollutants in UV/persulfate treatment

Dissolved organic matter (DOM), ubiquitous in natural waters, is known to inhibit the degradation of micropollutants in the advanced oxidation processes such as the UV/peroxydisulfate process. However, the quantitative understanding of the inhibitory pathways is missing. In this study, guanosine, aniline and catechol belonging to amines, purines and phenols were first investigated due to their resistance to UV irradiation at 254 nm and similar reactivity with SO₄^•- and HO^•, respectively. The presence of 0.5 mg_C L^-1 Suwannee River NOM (SRNOM) inhibited their degradation rates by 72.9%, 54.5%, and 32.4%, respectively, despite their similar degradation rates in the absence of SRNOM. The results highlight the importance of reverse reduction of oxidation intermediates to the parent compound by antioxidant moieties in SRNOM besides the inner filtering and radical scavenging effects. The three inhibitory pathways were quantified for 34 common micropollutants. In the presence of 0.5 mg_C L^-1 SRNOM, inner filtering effect was found to contribute less than 2.8% of the inhibitory percentages (IP). Radical scavenging effects contribute between 10.7% and 38.9% and compounds having lower reactivity with SO₄^•- (< 4.0 × 10⁹ M^-1 s^-1) tended to be inhibited more strongly. The IP of reverse reduction effects of SRNOM varied significantly from none up to 70.8%. It was linearly related with a micropollutant's reduction potential. Purines and amines generally exhibited more pronounced reverse reduction inhibition than phenols. The results of this study provide guidance on improving the elimination efficiency of micropollutants.

Activation of persulfate by LaFe1-xCoxO3 perovskite catalysts for the degradation of phenolics: Effect of synthetic method and metal substitution

The presence of resistant organic pollutants in environmental substrates requires the development and finding of novel decontamination methods. Advanced oxidation processes are among the most effective methods used for degradation of these pollutants through their oxidation and degradation into non-toxic and harmless, for the environment, final products. Ιn this research, a series of perovskites of ABO₃-type, with La and Fe and/or Co in A and B positions respectively, LaFe_1-xCo_xO₃ (x = 0, 0.25, 0.5, 0.75, 1), were synthesized with two different methods, a soft template method using anionic surfactant and by glycine combustion method and studied for their catalytic activity towards the degradation of phenolic compounds, a major class of environmental pollutants, through persulfate activation. The catalytic activity depended both by the B metal ion of perovskites and their ratio as well as by the synthesis method. LaCoO₃ prepared with the anionic surfactant method, showed the highest catalytic activity with a rate constant of 0.024 min^-1. Furthermore, the synthesis method also influenced the stability of perovskites as metal leaching studies showed that perovskites synthesized with the anionic surfactant showed greater stability. Quenching experiments were also used in order to shed light on the catalytic activation mechanism of persulfate for the degradation of phenolics. Overall, the results showed that the synthesis method can significantly affect the catalytic activity of the materials and their stability since the same materials synthesized with different methods show significantly different catalytic properties.

Direct red 89 dye degradation by advanced oxidation process using sulfite and zero valent under ultraviolet irradiation: Toxicity assessment and adaptive neuro-fuzzy inference systems modeling

Sulfate-based advanced oxidation process mediated by zero-valent iron (ZVI) and ultraviolet radiation for the decomposition of sulfite salts resulted in the formation of strong oxidizing species (sulfate and hydroxide radicals) in aqueous solution is reported. Degradation of direct red 89 (DR89) dye via UV/ZVI/sulfite process was systematically investigated to evaluate the effect of pH, ZVI dose, sulfite, initial DR89 concentration, and reaction time on DR89 degradation. The synergy factor of UV/ZVI/sulfite process was found to be 2.23-times higher than the individual processes including ZVI, sulfite and UV. By increasing the ZVI dose from 100 mg/L to 300 mg/L, dye degradation was linearly enhanced from 67.12 ± 3.36% to 82.40 ± 4.12% by the UV/ZVI/sulfite process due to enhanced ZVI corrosion and sulfite activation. The highest degradation efficiency of 99.61 ± 0.02% was observed at pH of 5.0, [ZVI]₀ = 300 mg/L, and [sulfite]₀ = 400 mg/L. Toxicity assessment by Lepidium sativum demonstrated that treated dye solution by UV/ZVI/sulfite was within the non-toxic range. The application of optimal adaptive neuro-fuzzy inference system (ANFIS) to predict DR89 degradation indicated high accuracy of ANFIS model (R² = 0.97 and RMSE = 0.051) via the UV/ZVI/sulfite process. It is suggested that UV/ZVI/sulfite process is suitable for industrial wastewater treatment.

Utilization of iron waste from steel industries in persulfate activation for effective degradation of dye solutions

The performance of three solid iron wastes (SIW-1, SIW-2 and SIW-3) was evaluated as an activator of persulfate (PS) for the degradation of methylene blue (MB). SIW-3 showed the highest performance among the three catalysts. The morphology, chemical composition and chemical structure of the three SIW were investigated using various analyses. Complete degradation of methylene blue (MB) in neutral pH was achieved after 60 min at PS concentration of 4 mM, initial MB concentration of 10 mg/L and catalyst dose of 1.0 g/100 mL using light. The degradation efficiency of MB decreased from 100% to 34.6% by increasing the initial MB concentration from 10 mg/L to 100 mg/L. The degradation of MB followed the second-order model. Scavenging experiments showed the major role of hydroxyl and sulfate radicals in the MB degradation. The performance of iron waste in the retained form was investigated and the degradation efficiencies were 96%, 91.2%, 91%, 89% and 86% in five succeeding cycles at pH 7, catalyst dose of 1 g/100 mL, initial MB concentration of 10 mg/L and PS concentration of 4 mM. Moreover, the reusability of suspended iron waste was investigated. The degradation efficiencies of methylene blue, methyl red, Congo red and acid blue-25 were 100%, 97%, 96% and 97.3%, respectively after 60 min. The degradation pathways of MB were proposed after the identification of intermediates using liquid chromatography-mass spectroscopy analysis. This study revealed that the iron waste can be efficiently employed for PS activation in the suspended and immobilized modes which reduces the total cost of the Fenton process paving the way for the large-scale application of this technique.

Vacancy-rich BiO2-x as a highly-efficient persulfate activator under near infrared irradiation for bacterial inactivation and mechanism study

This study, for the first time, developed a novel defective BiO_2-x based collaborating system, where the near-infrared light (NIR) irradiation (λ > 700 nm) initiated persulfate activation and photocatalytic bacterial inactivation simultaneously. Vacancy-rich BiO_2-x nanoplates possessed impressive NIR absorption and firstly realized persulfate activation under NIR irradiation. In this collaborating system, on one hand, the persulfate can be transformed into sulfate radicals through light/heat activation mode directly, which would be enhanced by the presence of vacancy-rich BiO_2-x owing to its outstanding light and heat absorption ability. On the other hand, the photogenerated electrons can further efficiently react with persulfate and form sufficient reactive sulfate radicals. The sulfate radicals, synergizing with other reactive species (O₂^-, h⁺, etc.), achieved a 7-log Escherichia coli inactivation within 40 min. The systematic investigation of inactivation mechanism revealed that the reactive species caused the dysfunction of cellular respiration, ATP synthesis and bacterial membrane, followed by the severely oxidative damage to the antioxidative SOD and CAT enzymes and the generation of carbonylated protein. The final leakage of DNA and RNA implied the lethal damage to the bacteria cells. This work provided a new insight into the persulfate associated NIR driven remediation technology of controlling microbial contaminants.

A novel preparation process of straw-based iron material for enhanced persulfate activation of reactive black 5 degradation

In this study, a new straw-iron composite material (ST@Fe) was synthesized through impregnation and freeze-drying process for persulfate (PS) activation to degrade reactive black 5 (RB5). Scanning electron microscope, Brunauer-Emmett-Teller, Fourier transform infrared spectrometry, and X-ray photoelectron spectroscopy confirmed that straw owns huge pore structure and varieties of organic functional groups, including hydroxyl carboxyl groups, which could effectively adsorb and complex iron ions. The interaction between the active iron particles in ST@Fe and straw generated Fe²⁺ for PS activation, effectively degrading over 94.80% of RB5 at an initial concentration of 20 ppm in 100 min with a specific degradation capacity of 18.97 min^-1 per unit of iron ions. ST@Fe/PS system demonstrated high tolerance in a wide initial pH range, which could gradually attack the RB5 molecular structure and significantly reduce the mineralization of water. Quenching experiments and electron paramagnetic resonance demonstrated the efficient generation of ROS including sulfate radicals, hydroxyl radicals, and singlet oxygen, and confirmed the dominance of sulfate radicals in the degradation process. The continuous degradation capacity and reusability of ST@Fe were also evaluated, which proved that the contaminant could be effectively degraded even after multiple cycles in the simulated textile wastewater, indicating its potential for use in practical remediation. This work provided a new method for the preparation of modified functional materials for the degradation of organic pollutants in textile wastewater and posed a novel strategy for the utilization of waste biomass.

Application of sulfate radicals-based advanced oxidation technology in degradation of trace organic contaminants (TrOCs): Recent advances and prospects

The large amount of trace organic contaminants (TrOCs) in wastewater has caused serious impacts on human health. In the past few years, Sulfate radical (SO₄^•-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal rates of recalcitrant TrOCs from water. Peroxymonosulfate (PMS) and persulfate (PS) are stable and non-toxic strong oxidizing oxidants and can act as excellent SO₄^•- precursors. Compared with hydroxyl radicals(·OH)-based methods, SR-AOPs have a series of advantages, such as long half-life and wide pH range, the oxidation capacity of SO₄^•- approaches or even exceeds that of ·OH under suitable conditions. In this review, we present the progress of activating PS/PMS to remove TrOCs by different methods. These methods include activation by transition metal, ultrasound, UV, etc. Possible activation mechanisms and influencing factors such as pH during the activation are discussed. Finally, future activation studies of PS/PMS are summarized and prospected. This review summarizes previous experiences and presents the current status of SR-AOPs application for TrOCs removal. Misconceptions in research are avoided and a research basis for the removal of TrOCs is provided.

Cobalt-ferrite/Ag-fMWCNT hybrid nanocomposite catalyst for efficient degradation of synthetic organic dyes via peroxymonosulfate activation

The activation of peroxymonosulfate (PMS) by nanocatalysts has shown promise as an effective wastewater treatment protocol. Magnetic CoFe₂O₄/Ag-nanoparticles (NPs) anchored on functionalized multiwalled carbon nanotubes (fMWCNTs), a support material, were synthesized using a one-pot solvothermal method. The surface morphologies and physicochemical properties of the CoFe₂O₄/Ag-fMWCNT hybrid nanocomposite catalyst were investigated by powder X-ray diffraction analysis, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and nitrogen adsorption-desorption isotherms. The activity of the nanocomposite combined with PMS (serving as an activator) toward the degradation of rhodamine B, methylene blue, methyl orange, and methyl red was investigated. The obtained optimal 0.02 g CoFe₂O₄/Ag-fMWCNTs exhibited the highest PMS activation performance, with a removal percentage of 100% for 20 ppm dye concentration at pH 6.5 within 14 min. In addition, the rhodamine B degradation product was investigated by analyzing the intermediate products by liquid chromatography/mass spectrometry (LC-MS). The homogeneous distribution of CoFe₂O₄/Ag NPs on fMWCNTs accelerated PMS activation and enhanced the catalytic degradation of dyes. The effects of the reaction parameters on the dye degradation efficiency were investigated by using different nanocatalysts (fMWCNTs, CoFe₂O₄/fMWCNTs, and CoFe₂O₄/Ag-fMWCNTs) as well as by varying the pH (3-11), dye concentration (10-50 mg/l), catalyst dose (0.002-0.3 g), and PMS dose (0.02-0.1 g). Quenching experiments revealed that sulfate radicals are primarily responsible for rhodamine B degradation. A plausible mechanism for catalytic PMS activation was also proposed. Complete decolorization occurred within the first few minutes of the reaction. Furthermore, the catalytic activity of the CoFe₂O₄/Ag-fMWCNT/PMS hybrid nanocomposite remained stable after five successive cycles. This study verifies the applicability of CoFe₂O₄/Ag-fMWCNTs as an ultrafast catalyst for the complete removal of persistent organic pollutants via PMS activation, revealing their promising application in wastewater treatment.

Selecting the most environmentally friendly oxidant for UVC degradation of micropollutants in urban wastewater by assessing life cycle impacts: Hydrogen peroxide, peroxymonosulfate or persulfate?

The quality of water bodies has been decreasing over time. Urban wastewater treatment plants (UWWTPs) are key players to avoid that potentially toxic micropollutants reach the environment, and advanced treatment processes are being applied to address this issue. However, several variables have to be taken into account, particularly environmental sustainability. The aim of this study is to assess the life cycle impacts of combining UVC with different oxidants - hydrogen peroxide (H₂O₂), peroxymonosulfate (PMS) and persulfate (PS) -, considering different concentrations (0.05, 0.20 and 0.50 mM) and UVC dosages of 42, 63 and 170 J/L, corresponding to UV contact times of 4, 7 and 18 s in a specific industrial equipment. UVC/PMS was the worst performing process (despite being able to achieve removals similar to UVC/H₂O₂), followed by UVC/PS. Both would only be preferred relatively to H₂O₂ if much lower concentrations of PMS or PS could be used to achieve the same removal of micropollutants (10 times lower was not enough). Additionally, PMS and PS production contributes more to the environmental footprint than the electricity use, unlike H₂O₂. Therefore even if considering lower treatment times when using sulfate-based oxidants, these will still be more impactful than using H₂O₂ at the studied conditions. Based on both avoided and generated impacts, H₂O₂ is the best option environmentally. In this case, the environmental impacts are more affected by an increase in treatment time rather than by an increase in the H₂O₂ concentration. It is thus best to opt for a higher concentration and the lowest treatment time possible for a significant ecotoxicity reduction. Electricity is a relevant parameter in all cases and its impact can be reduced in nearly all endpoint categories by opting for cleaner energy sources.

Degradation of oxytetracycline in aqueous solution by heat-activated peroxydisulfate and peroxymonosulfate oxidation

Oxytetracycline (OTC) is a broad-spectrum antibiotic that resists biodegradation and poses a risk to the ecosystem. This study investigated the degradation of OTC by heat-activated peroxydisulfate (PDS) and peroxymonosulfate (PMS) processes. Response surface methodology (RSM) was used to evaluate the effect of process parameters, namely initial pH, oxidant concentration, temperature, and reaction time on the OTC removal efficiency. According to the results of the RSM models, all four independent variables were significant for both PDS and PMS processes. The optimum process parameters for the heat-activated PDS process were pH 8.9, PDS concentration 3.9 mM, temperature 72.9°C, and reaction time 26.5 min. For the heat-activated PMS process, optimum conditions were pH 9.0, PMS concentration 4.0 mM, temperature 75.0°C, and reaction time 20.0 min. The predicted OTC removal efficiencies for the PDS and PMS processes were 89.7% and 84.0%, respectively. As a result of the validation experiments conducted at optimum conditions, the obtained OTC removal efficiencies for the PDS and PMS processes were 87.6 ± 4.2 and 80.2± 4.6, respectively. PDS process has higher kinetic constants at all pH values than the PMS process. Both processes were effective in OTC removal from aqueous solution and RSM was efficient in process optimization.

Transformation of gemfibrozil by the interaction of chloride with sulfate radicals: Radical chemistry, transient intermediates and pathways

The radical chemistry of SO4·- is strongly affected by its interaction with chloride in natural waters, during which SO4·- can be converted to HO· and reactive chlorine species (RCS). This study investigated the effects of chloride on gemfibrozil (GFRZ) transformation via the UV/peroxydisulfate (PDS) process, elucidating the kinetics, degradation pathways and solution toxicity. The pseudo-first-order rate constants (k') of GFRZ by UV/PDS changed slightly from 1.0 × 10-3 s-1 to 9.3 × 10-4 s-1 as the chloride content increased from 0 to 10 mM because the increase in HO· and RCS levels compensated for the decrease in SO4·- concentration. However, the transformation pathways in the presence of chloride changed significantly. From the transient absorption spectra, we inferred that RCS and SO4·- attacked GFRZ mainly through hydrogen abstraction and/or electron transfer, while HO· interacted with the GFRZ aromatic ring by addition. Hydroxylation, carboxylation and cleavage products were enhanced in UV/PDS/Cl- compared to UV/PDS through the addition of HO· and the cleavage of CO bonds by RCS, and total organic chlorine (TOCl) was undetectable. Interestingly, the acute toxicity was lowest in UV/PDS/Cl-, with an inhibition percentage of 1% at 30 min. The higher inhibition percentages in UV/PDS (13%) and UV alone (53%) at 30 min likely resulted from the stronger capacity of HO· and RCS to oxidize aldehydes to carboxylic groups and cleave CO bonds, respectively, than that of SO4·-. This study provides a better understanding of contaminant transformation mechanisms under UV/PDS treatment at chloride levels present in natural waters.

A heterogeneous peroxymonosulfate catalyst built by Fe-based metal-organic framework for the dye degradation

The regulatory control on dyes is an important issue, as their discharge into the environment can pose significant risks to human health. MIL-101(Fe) prepared by a solvothermal method was used as a catalyst to generate sulfate (SO₄^•-) and hydroxyl (HO^•) radicals from peroxymonosulfate (PMS) for the treatment of orange G (OG). The structural properties of MIL-101(Fe) were assessed by a number of characterization approaches (e.g., Fourier-transform infrared spectroscopy). The factors controlling the removal of OG were explored by a response surface methodology with central composite design (RSM-CCD) plus adaptive neuro-fuzzy inference system (ANFIS). The synthetized MIL-101(Fe) had uniform octahedral nanocrystals with rough surfaces and porous structures. The maximum catalytic removal efficiency of OG with MIL-101(Fe)/PMS process was 74% (the final concentration of Fe²⁺ as 0.19 mg/L and reaction rate of 434.2 μmol/g/h). The catalytic removal of OG could be defined by the non-linear kinetic models based on RSM. The OG removal efficiency declined noticeably with the addition of radical scavengers such as ethanol (EtOH) and tert-butanol (TBA) along with some mineral anions. Accordingly, MIL-101(Fe)/PMS is identified as an effective remediation option for the dyes based on advanced oxidation process (AOPs) based on high treatment efficiency at low dosage of low cost catalyst.

Mechanism of As(III) removal properties of biochar-supported molybdenum-disulfide/iron-oxide system

Sulfate (SO₄^•-) and hydroxyl-based (HO^•) radical are considered potential agents for As(III) removal from aquatic environments. We have reported the synergistic role of SO₄^•- and HO^• radicals for As(III) removal via facile synthesis of biochar-supported SO₄^•- species. MoS₂-modified biochar (MoS₂/BC), iron oxide-biochar (FeO_x@BC), and MoS₂-modified iron oxide-biochar (MoS₂/FeO_x@BC) were prepared and systematically characterized to understand the underlying mechanism for arsenic removal. The MoS₂/FeOx@BC displayed much higher As(III) adsorption (27 mg/g) compared to MoS₂/BC (7 mg/g) and FeOx@BC (12 mg/g). Effects of kinetics, As(III) concentration, temperature, and pH were also investigated. The adsorption of As(III) by MoS₂/FeOx@BC followed the Freundlich adsorption isotherm and pseudo-second-order, indicating multilayer adsorption and chemisorption, respectively. The FTIR and XPS analysis confirmed the presence of Fe-O bonds and SO₄ groups in the MoS₂/FeO_x@BC. Electron paramagnetic resonance (EPR) and radical quenching experiments have shown the generation of SO₄^•- radicals as predominant species in the presence of MoS₂ and FeO_x in MoS₂/FeOx@BC via radical transfer from HO^• to SO₄^2-. The HO^• and SO₄^•- radicals synergistically contributed to enhanced As(III) removal. It is envisaged that As(III) initially adsorbed through electrostatic interactions and partially undergoes oxidation, which is finally adsorbed to MoS₂/FeOx@BC after being oxidized to As(V). The MoS₂/FeO_x@BC system could be considered a novel material for effective removal of As(III) from aqueous environments owing to its cost-effective synthesis and easy scalability for actual applications.

Reactivity and reaction mechanisms of sulfate radicals with lindane: An experimental and theoretical study

Advanced oxidation technologies (AOTs) have been intensely used to eliminate various organic pollutants in engineering waters. In this context, we investigated the kinetics and mechanisms of the sulfate radical (SO₄^-)-mediated degradation of lindane in UV/peroxydisulfate system, and compared results with previous studies on SO₄^--based AOTs for destruction of lindane. The second order rate constant (k) value between SO₄^- and lindane was determined to be (8.95 ± 0.29) × 10⁶ M^-1 s^-1via competition kinetics using p-cyanobenzoic acid as reference compound, which is close to the theoretically calculated value of 4.41 × 10⁷ M^-1 s^-1, that was performed at SMD/M05-2X/6-311++G**//M05-2X/6-31+G** level of theory using density functional theory (DFT) approach. H-atom abstraction pathway was calculated to be thermodynamically favorable and kinetically dominant. In the combined experimental and theoretical study, we aim for a better understanding on the degradation kinetics and mechanisms of lindane, serving as a starting point for more attention to SO₄^--mediated degradation kinetics of cycloaliphatic compounds in future.

Insights into the effects of bromide at fresh water levels on the radical chemistry in the UV/peroxydisulfate process

Bromide (Br^-) is a typical scavenger to sulfate radical (SO₄^•-) and hydroxyl radical (HO^•), which simultaneously forms secondary reactive bromine species (RBS) such as Br^• and Br₂^•-. This study investigated the effects of Br^- at fresh water levels (~μM) on the radical chemistry in the UV/peroxydisulfate (UV/PDS) process by combining the degradation kinetics of probe compounds (nitrobenzene, metronidazole, and benzoate) with kinetic model. Br^- at 1 - 50 μM promoted the conversion from SO₄^•- to HO^• and RBS in the UV/PDS process. At pH 7, the concentration of SO₄^•- monotonically decreased by 31.5 - 94.8% at 1 - 50 μM Br^-, while that of HO^• showed an increasing and then decreasing pattern, with a maximum increase by 171.7% at 5 μM Br^-. The concentrations of Br^• and Br₂^•- (10^-12 - 10^-10 M) were 2 - 3 orders of magnitude higher than SO₄^•- and HO^•. Alkaline condition promoted the conversion from SO₄^•- to HO^•, and drove the transformation from RBS to HO^•, resulting in much lower concentrations of RBS at pH 10. Br^- at 1 μM and 5 μM decreased the pseudo-first-order reaction rates (k's) of 15 pharmaceuticals and personal care products (PPCPs) by 15.2 - 73.9%, but increased k's of naproxen and ibuprofen by 13.7 - 57.3% at pH 7. The co-existence of 10 - 1000 μM Cl^- with 5 μM Br^- further promoted the conversion from SO₄^•- to HO^• compared to Br^- alone. Bicarbonate consumed SO₄^•- and HO^• but slightly affected RBS, while natural organic matter (NOM) exerted scavenging effects on HO^• and RBS more significantly than SO₄^•-. This study demonstrated that Br^- at fresh water levels significantly altered the radical chemistry of the UV/PDS process, especially for promoting the formation of HO^•.

Magnetic CoFe2O4 nanocrystals derived from MIL-101 (Fe/Co) for peroxymonosulfate activation toward degradation of chloramphenicol

In this study, porous magnetic CoFe₂O₄ nanocrystals (NCs) were successfully synthesized by using bimetal-organic framework (MOF) as a precursor, and used as catalysts to activate peroxymonosulfate (PMS) for the removal of chloramphenicol (CAP) in the solution. The structure and physicochemical properties of CoFe₂O₄ NCs were thoroughly examined by a series of characterization techniques. The results revealed as-synthesized CoFe₂O₄ had a nanorod-shaped structure with high specific surface area (83.00 m² g^-1) and pore volume (0.31 cm³ g^-1). Furthermore, the degradation efficiency (100%) and the removal of total organic carbon (68.09%) were achieved after 120 min with 0.1 g/L CoFe₂O₄ NCs, 2 mM PMS and 10 mg/L CAP at pH of 8.20. In addition, effects of catalyst dosage, PMS dosage, initial pH values, CAP concentration and co-existing anions as well as natural organic matters in the solution on the degradation efficiencies were studied and all the removal can be well fitted with pseudo-first-order kinetic model (R² > 0.96). Sulfate radicals (SO₄^•-) and hydroxyl radicals (HO•) were proved to be two main reactive species for CAP removal in CoFe₂O₄/PMS system based on quenching experiments. CAP was degraded by the main pathways of dichlorination, denitration, decarboxylation, hydroxylation, ring cleavage and chain cleavage on CoFe₂O₄/PMS system through high performance liquid chromatograph-mass spectrometry analysis. We believe that this study would be very meaningful to promote the applications of MOFs-derived catalysts on the SO₄^•- based advanced oxidation processes (SR-AOPs) for the environmental remediation.

Improving dewaterability of waste activated sludge by thermally-activated persulfate oxidation at mild temperature

The mass production of waste activated sludge in wastewater treatment plants may lead to environmental pollution and sludge dewatering is an essential process during its treatment. The oxidation of extracellular polymeric substances (EPS) was the core step to achieve deep sludge dewatering. In this study, thermally-activated sodium persulfate (SPS) process was managed to improve the dewaterability of waste activated sludge (WAS) and its internal mechanism was systematically elaborated. Experimental results showed that with 2.0 mmol/g VSS SPS at 80 °C, capillary suction time (CST) was roughly 59.74% of that in raw sludge. Under this condition, 14.66 ± 0.10 × 10¹¹ kg/m of specific resistance to filtration (SRF) and 61.8% ± 0.1% of water content (W_C) was determined, respectively. A solubilization/oxidation process was proposed to unravel the mechanism of the enhanced dewaterability of WAS in thermally-activated SPS process. Mild temperature efficiently disrupted the sludge flocs and broke cell walls, releasing large amounts of EPS into bulk phase. Meanwhile, mild temperature accelerated the decomposition of SPS to generate sulfate radicals (SO₄^-) and hydroxyl radicals (OH) for oxidizing EPS, facilitating the conversion of bound hydrated water into free water and achieving solid-water separation. The higher reaction temperature favored sludge dewatering, whereas overdosing SPS posed no significant impact. Further analysis illustrated that tyrosine protein-like, tryptophan protein-like, fulvic acid-like and humic acid-like substances in various EPS fractions together exerted the influence on sludge dewatering. Furthermore, the synergy process could alter the secondary structure of protein, which caused a loose structure of EPS and the exposure of hydrophobic sites, facilitating the dehydration of sludge flocs. The details of how thermally-activated SPS process enhanced sludge dewaterability provided the theoretical and technical basis for the application of the process under a real-world situation.

Efficient activation of oxone by pyrite for the degradation of propanil: Kinetics and degradation pathway

Pyrite (FeS₂) is an abundant sulfide-associated iron mineral that exists in the earth. In this study, the pyrite/oxone process was demonstrated to be an effective approach for the catalytic degradation of propanil, where more than 90% decay ([propanil]₀ = 0.01 mM) was achieved within 15 min. Typically, the effects of various experimental parameters, including catalyst loading, oxone dosage, propanil concentration, and initial solution pH, were examined. Two optimal reaction pH values were observed at pH 9.1 and pH 2.9. The generated SO₄－ and OH were verified to be the dominant reactive radicals and primarily responsible for the propanil degradation. Both Fe(II) regeneration and sulfur conversion play an important role in oxone activation mechanism and effectively aid the catalytic activity of pyrite. Different co-existing natural water constituents exert dissimilar effects on the pyrite/oxone process. Additionally, the reusability test of pyrite exhibited a reasonable catalytic activity. The pyrite/oxone process was proven efficient in terms of propanil mineralization. A series of reaction intermediates was detected via four major degradation pathways. Overall, the pyrite/oxone process could be a promising approach for the removal of organic compounds in water.

Efficient degradation of perfluorooctanoic acid by electrospun lignin-based bimetallic MOFs nanofibers composite membranes with peroxymonosulfate under solar light irradiation

Perfluorooctanoic acid (PFOA) has demonstrated potential toxicity to human health and has been detected in different environmental matrices due to its stable physical and chemical properties. To degrade PFOA under solar light irradiation, we fabricated a lignin/polyvinyl alcohol (PVA)/Co/Fe metal-organic frameworks (lignin/PVA/bi-MOFs) composite membrane via a typical electrospinning and in-situ solvothermal method for the catalytic degradation of PFOA. In the peroxymonosulfate (PMS)/membranes/solar light system, Electron paramagnetic resonance analysis (EPR) demonstrated the sulfate radicals (SO₄^-) and hydroxyl radicals (OH) were generated by activating PMS with transition metal and solar light irradiation. Lignin/PVA/bi-MOFs showed outstanding performance in that 89.6% of PFOA was degraded within 3 h under optimal conditions. Compared with that in solar light, only 59.6% PFOA was degraded in the dark, and the rate constant of PFOA degradation decreased from 0.0150 min^-1 to 0.0046 min^-1. Moreover, lignin/PVA/bi-MOFs were reused after simply rinsing with ultra-pure water and the degradation capacity of lignin/PVA/bi-MOFs remained at 77% after 4 cycles. The results might provide a new concept for the design of bimetallic MOFs for applications in organic pollutant removal.

Photocatalytic behavior for the phenol degradation of ZnAl layered double hydroxide functionalized with SDS

Functionalized ZnAl layered double hydroxide based photocatalyst was obtained by the addition of sodium dodecyl sulfate (SDS) during the synthesis by the coprecipitation method, and further calcination at 400 °C. Bare and modified materials were characterized by X-ray diffraction, nitrogen adsorption-desorption, IR, UV-Vis, EPR and XPS spectroscopies, SEM and HRTEM. The synthesized material was evaluated in the photodegradation of phenol in a 40 ppm aqueous solution (4.25 × 10^-4 mol of phenol/L), under UV light irradiation. An increasing in the degradation of phenol from 62 to 95%, and from 62 to 82% in the mineralization of phenol was obtained using SDS functionalized ZnAl LDH, in comparison with the unmodified material. This increase could be attributed to the presence of sulfate radicals, confirmed by the EPR study.

A comparative study on phenazone degradation by sulfate radicals based processes

In this paper, a comparative study on removal of the emerging pollutant phenazone (PNZ) by two treatment processes UVA/Fe(II)/persulfate (PS) and UVA/Fe(II)/peroxymonosulfate (PMS) was conducted. The two processes showed high efficiency in PNZ degradation, followed by a reasonable mineralization. The treatment system with PMS was found to be more efficient for PNZ degradation than that with PS due to the larger amounts of radicals generated. While the treatment process UVA/Fe(II)/PS showed higher ΔTOC/ΔSMX (TOC removal per unit of PNZ decay) than UVA/Fe(II)/PMS process. The sulfate and hydroxyl radicals played dominant roles in PNZ degradation in the UVA/Fe(II)/PS and UVA/Fe(II)/PMS process, respectively. Six and seven intermediates during PNZ degradation by UVA/Fe(II)/PS and UVA/Fe(II)/PMS process were detected, respectively. Among the detected intermediates, six of them are found for the first time. It takes shorter time for toxicity elimination by UVA/Fe(II)/PS process than UVA/Fe(II)/PMS, possibly due to the lower Kow values of hydroxylated products. The results demonstrate that UVA/Fe(II)/PMS process is more efficient in PNZ degradation, while UVA/Fe(II)/PS is more efficient in detoxification of PNZ. The two sulfate radicals based processes have good potentials in degradation, mineralization and detoxification of the emerging contaminants such as PNZ.

Efficient degradation of bisphenol A in water by heterogeneous activation of peroxymonosulfate using highly active cobalt ferrite nanoparticles

Cobalt ferrite CoFe₂O₄ catalyst was fabricated and systematically investigated as an efficient peroxymonosulfate (PMS, HSO₅^-) activator for the degradation of recalcitrant organic contaminants (ROCs) in water treatment. Both SO₄^- and OH on the surface of catalyst were unveiled to be primarily responsible for bisphenol A (BPA) degradation by a comprehensive study using electron paramagnetic resonance (EPR), radical scavengers and quantification of SO₄^-, and the negligible contribution of singlet oxygen (¹O₂) was also observed. BPA degradation was accelerated in the presence of humic acid, and it increased first but then decreased with the further addition of fulvic acid. Moreover, the presence of chloride and bicarbonate ions can enhance both BPA and TOC removal. The toxicity of the target aqueous solution ascended slowly at the early stage but then declined dramatically and almost vanished as the reaction proceeded. The removal efficiencies of other typical ROCs (clofibric acid, 2,4-dichlorophenol, etc.) and the decontamination of natural surface water spiked with BPA were also evaluated. This CoFe₂O₄/PMS process could be well applied as a safe, efficient, and sustainable approach for ROCs remediation in complex wastewater matrix.

Electrochemical activation of peroxymonosulfate in cathodic micro-channels for effective degradation of organic pollutants in wastewater

Persulfate may be electrochemically activated into sulfate radicals (SO₄^•-) or hydroxyl radicals (^•OH) by accepting electrons on cathode. Although electro-activated persulfate has displayed good performance in oxidation of organic pollutants in wastewater, both yield and availability of radicals are still limited because the electrostatic repulsion resists the contact between persulfate anions and cathode. In this study, a flow-through cathode (FTC) with well-ordered micro-channels was fabricated via carbonization of wood. The solution containing persulfate ions flowed through these micro-channels and then activation of persulfate was confined and performed in the micro-channels, which enhanced remarkably the contact between persulfate ions and cathode. Under the residence time of 10 min and other optimized conditions, the decomposition rate of persulfate in FTC displayed 3.78 folds of enhancement compared with that on a flow-by cathode (FBC). EPR signal of ^•OH produced in FTC was also higher distinctly than that on FBC. The average removal rates of phenol and TOC in FTC were 97.9 % and 39.6 %, respectively, which were 2.61 times and 2.57 times as much as that on FBC. Cycling experiments indicated that this FTC had good stability. Therefore, activating persulfate in FTC is an efficient strategy to enhance the yield and availability of radicals.