Carbon capture and storage in low-carbon concrete using products derived from olivine

A novel process is reported that produces amorphous silica and nesquehonite (MgCO3·3H2O) from the magnesium silicate mineral olivine ((Mg, Fe)2·SiO4). The amorphous silica forms a supplementary cementitious material for use in concrete. The formation of nesquehonite sequesters carbon making the overall process carbon negative. Nesquehonite can also be used to form low-carbon construction products such as bricks, blocks and boards. This article reports on key process optimization studies. The potential for amorphous precipitated silica derived from olivine to produce carbon-negative concrete is discussed.

Zeolite Imidazolate Frameworks-8@SiO2-ZrO2 Crystal-Amorphous Hybrid Core-Shell Structure as a Building Block for Water Purification Membranes

Metal-organic frameworks (MOFs) are emerging as promising materials for water purification membranes, owing to their uniform microporous structures and chemical functionalities. Here, we report a simple procedure for depositing MOF-based nanofiltration membranes on commercial TiO2 ceramic tubular supports, completely avoiding the use of dispersants or binders. Zeolite imidazolate frameworks-8 (ZIF-8) nanocrystals were synthesized in methanol at room temperature and subsequently coated with an amorphous SiO2-ZrO2 gel to generate a dispersion of ZIF-8@SiO2-ZrO2 core-shell nanoparticles. The amorphous SiO2-ZrO2 gel served as a binding agent for the ZIF-8 nanocrystals, thus forming a defect-free continuous membrane layer. After repeating the coating twice, the active layer had a thickness of 0.96 μm, presenting a rejection rate >90% for the total organic carbon in an aquaculture effluent and in a wastewater treatment plant, while reducing the concentration of trimethoprim, here used as a target pollutant. Moreover, the oxide gel provided the MOF-based active layer with good adhesion to the support and enhanced its hydrophilicity, resulting in a membrane with excellent mechanical stability and resistance to fouling during the crossflow filtration of the real wastewater samples. These results implied the high potential of the MOF-based nanocomposite membrane for effective treatment of actual wastewater streams.

Microbially induced precipitation of silica by anaerobic methane-oxidizing consortia and implications for microbial fossil preservation

Authigenic carbonate minerals can preserve biosignatures of microbial anaerobic oxidation of methane (AOM) in the rock record. It is not currently known whether the microorganisms that mediate sulfate-coupled AOM-often occurring as multicelled consortia of anaerobic methanotrophic archaea (ANME) and sulfate-reducing bacteria (SRB)-are preserved as microfossils. Electron microscopy of ANME-SRB consortia in methane seep sediments has shown that these microorganisms can be associated with silicate minerals such as clays [Chen et al., Sci. Rep. 4, 1-9 (2014)], but the biogenicity of these phases, their geochemical composition, and their potential preservation in the rock record is poorly constrained. Long-term laboratory AOM enrichment cultures in sediment-free artificial seawater [Yu et al., Appl. Environ. Microbiol. 88, e02109-21 (2022)] resulted in precipitation of amorphous silicate particles (~200 nm) within clusters of exopolymer-rich AOM consortia from media undersaturated with respect to silica, suggestive of a microbially mediated process. The use of techniques like correlative fluorescence in situ hybridization (FISH), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), and nanoscale secondary ion mass spectrometry (nanoSIMS) on AOM consortia from methane seep authigenic carbonates and sediments further revealed that they are enveloped in a silica-rich phase similar to the mineral phase on ANME-SRB consortia in enrichment cultures. Like in cyanobacteria [Moore et al., Geology 48, 862-866 (2020)], the Si-rich phases on ANME-SRB consortia identified here may enhance their preservation as microfossils. The morphology of these silica-rich precipitates, consistent with amorphous-type clay-like spheroids formed within organic assemblages, provides an additional mineralogical signature that may assist in the search for structural remnants of microbial consortia in rocks which formed in methane-rich environments from Earth and other planetary bodies.

Free-Standing Molecularly Thin Amorphous Silica Nanosheets

Recent progress in 2D materials has initiated new fields of molecularly thin amorphous materials with mysterious properties and structures. However, designed synthesis of molecularly thin amorphous silica still remains a challenge; whether free-standing molecularly thin amorphous silica nanosheets can exist is unclear. Here, this issue is addressed by using a new chemical protocol; solid-state surfactant lamellae with ordered alkyl-chain arrangements can serve as superior templates guiding free-standing amorphous silica nanosheets. Simple sonication of the lamellar hybrids allows exfoliation into monolayer amorphous silica nanosheets with 0.9 nm thickness. In addition, the nanosheets show the distinctive feature of high colloidal stability that enables atomic layer engineering of silica nanocoatings and dielectric nanofilms. The approach may shed new light on the properties and applications of old silica.

Room Temperature Viscous Flow of Amorphous Silica Induced by Electron Beam Irradiation

The increasing use of oxide glasses in high-tech applications illustrates the demand of novel engineering techniques on nano- and microscale. Due to the high viscosity of oxide glasses at room temperature, shaping operations are usually performed at temperatures close or beyond the point of glass transition T_g . Those treatments, however, are global and affect the whole component. It is known from the literature that electron irradiation facilitates the viscous flow of amorphous silica near room temperature for nanoscale components. At the micrometer scale, however, a comprehensive study on this topic is still pending. In the present study, electron irradiation inducing viscous flow at room temperature is observed using a micropillar compression approach and amorphous silica as a model system. A comparison to high temperature yielding up to a temperature of 1100 °C demonstrates that even moderate electron irradiation resembles the mechanical response of 600 °C and beyond. As an extreme case, a yield strength as low as 300 MPa is observed with a viscosity indicating that T_g has been passed. Those results show that electron irradiation-facilitated viscous flow is not limited to the nanoscale which offers great potential for local microengineering.

Green Pervious Concrete Containing Diatomaceous Earth as Supplementary Cementitous Materials for Pavement Applications

Portland cement porous concrete (PCPC) has received immense interest recently due to its environmental aids. Its porous structure helps to reduce the water runoff amount while improving the recharge of groundwater. Earlier studies have concentrated on illustrating and knowing the functional as well as structural properties of PCPC. However, very few studies are available on PCPC in combination with natural silica sources as supplementary cementitious materials (SCMs). Most SCMs are by-products of industrial manufacturing processes and cause some environmental concerns, but with their pozzolanic effect, they could be utilized as partial substitute materials for ordinary Portland cement (OPC) to enhance the strength as well as durability performance. The aim of this study is to evaluate the effects of diatomaceous earth (DE) as a supplementary cementitious material for partial substitution of OPC for Portland cement porous concrete application. Compression strength, split tensile strength, and flexural strength tests were performed to determine the effect of partial replacement. To investigate the impact of test variables, basic tests, including void content and water permeability, were also performed. Compared to the control concrete, the results show that a 15% replacement of cement with DE significantly increased the compressive strength (by 53%) while also providing adequate porosity and better water permeability. Statistical analysis (ANOVA) and regression analysis showed that there is a significant (p < 0.05) growth within the physical characteristics of concrete upon the replacement of cement by 15% DE. Collectively, the replacement of cement with DE could not only improve the concrete strength but also reduce the consumption of cement, thereby lessening the cost of construction as well as indirectly reducing the carbon footprint.

Valorization of Sugarcane By-Products through Synthesis of Biogenic Amorphous Silica Microspheres for Sustainable Cosmetics

Ashes from sugarcane by-product incineration were used to synthesize silica powders through alkaline hot extraction, followed by ethanol/acid precipitation or the sol-gel method. Both production methods allowed amorphous spherical silica microparticles with sizes ranging from 1-15 μm and 97% purity to be obtained. Water absorption ranged from 135-155 mL/100 g and 150-250 mL/100 g for precipitated silica and silica gel, respectively, while oil absorption ranged from 305 to 390 and from 250 to 350 mL/100 g. The precipitation with ethanol allowed the recovery of 178 g silica/kg ash, with a lab process cost of EUR 28.95/kg, while the sol-gel process showed a yield of 198 g silica/kg ash with a cost of EUR 10.89/kg. The experimental data suggest that ash from sugarcane by-products is a promising source to be converted into a competitive value-added product, minimizing the environmental impact of disposal problems.

Pulmonary Toxicity of Silica Linked to Its Micro- or Nanometric Particle Size and Crystal Structure: A Review

Silicon dioxide (SiO2) is a mineral compound present in the Earth’s crust in two mineral forms: crystalline and amorphous. Based on epidemiological and/or biological evidence, the pulmonary effects of crystalline silica are considered well understood, with the development of silicosis, emphysema, chronic bronchitis, or chronic obstructive pulmonary disease. The structure and capacity to trigger oxidative stress are recognized as relevant determinants in crystalline silica’s toxicity. In contrast, natural amorphous silica was long considered nontoxic, and was often used as a negative control in experimental studies. However, as manufactured amorphous silica nanoparticles (or nanosilica or SiNP) are becoming widely used in industrial applications, these paradigms must now be reconsidered at the nanoscale (<100 nm). Indeed, recent experimental studies appear to point towards significant toxicity of manufactured amorphous silica nanoparticles similar to that of micrometric crystalline silica. In this article, we present an extensive review of the nontumoral pulmonary effects of silica based on in vitro and in vivo experimental studies. The findings of this review are presented both for micro- and nanoscale particles, but also based on the crystalline structure of the silica particles.

Understanding the Mechanisms of SiC-Water Reaction during Nanoscale Scratching without Chemical Reagents

Microcracks inevitably appear on the SiC wafer surface during conventional thinning. It is generally believed that the damage-free surfaces obtained during chemical reactions are an effective means of inhibiting and eliminating microcracks. In our previous study, we found that SiC reacted with water (SiC–water reaction) to obtain a smooth surface. In this study, we analyzed the interfacial interaction mechanisms between a 4H-SiC wafer surface (0001-) and diamond indenter during nanoscale scratching using distilled water and without using an acid–base etching solution. To this end, experiments and ReaxFF reactive molecular dynamics simulations were performed. The results showed that amorphous SiO₂ was generated on the SiC surface under the repeated mechanical action of the diamond abrasive indenter during the nanoscale scratching process. The SiC–water reaction was mainly dependent on the load and contact state when the removal size of SiC was controlled at the nanoscale and the removal mode was controlled at the plastic stage, which was not significantly affected by temperature and speed. Therefore, the reaction between water and SiC on the wafer surface could be controlled by effectively regulating the load, speed, and contact area. Microcracks can be avoided, and damage-free thinning of SiC wafers can be achieved by controlling the SiC–water reaction on the SiC wafer surface.

Physicochemical Characteristics and Occupational Exposure of Silica Particles as Byproducts in a Semiconductor Sub Fab

This study aimed to elucidate the physicochemical characteristics and occupational exposure of silica powder and airborne particles as byproducts generated from the first scrubbers of chemical vapor deposition and diffusion processes during maintenance in a semiconductor facility sub fab to reduce unknown risk factors. The chemical composition, size, morphology, and crystal structure of powder and airborne particles as byproducts were investigated using a scanning electron microscopy and transmission electron microscopy equipped with an energy dispersive X-ray spectroscopy, and an X-ray diffraction. The number and mass concentration measurements of airborne particles were performed by using an optical particle sizer of a direct-reading aerosol monitor. All powder and airborne particle samples were mainly composed of oxygen (O) and silicon (Si), which means silica. The byproduct particles were spherical and/or nearly spherical and the particle size ranged from 10 to 90 nm, based on primary particles. Most of the particles were usually agglomerated within a particle size range from approximately 100 nm to 35 µm. In addition, most of the powder samples exhibited diffraction patterns with a broad and relatively low intensity at 2θ degrees 21.6–26.7°, which is similar to that of pure amorphous silica. The above results show the byproduct particles are amorphous silica, which are considered a less toxic foam compared to crystalline silica. The number and mass concentrations of PM10 (particles less than 10 µm in diameter) ranged from 4.250–78.466 particles/cm³ and 0.939–735.531 µg/m³, respectively. In addition, 0.3–1.0 and 2.5–10 µm particles occupied the highest portion of the number and mass concentrations, respectively. Meanwhile, several peak exposure patterns were observed at a specific step, which is the process of removing powder particles on the inner chamber and cleaning the chamber by using a vacuum cleaner and a clean wiper, during the maintenance task.

On Structural Rearrangements Near the Glass Transition Temperature in Amorphous Silica

The formation of clusters was analyzed in a topologically disordered network of bonds of amorphous silica (SiO₂) based on the Angell model of broken bonds termed configurons. It was shown that a fractal-dimensional configuron phase was formed in the amorphous silica above the glass transition temperature T_g. The glass transition was described in terms of the concepts of configuron percolation theory (CPT) using the Kantor-Webman theorem, which states that the rigidity threshold of an elastic percolating network is identical to the percolation threshold. The account of configuron phase formation above T_g showed that (i) the glass transition was similar in nature to the second-order phase transformations within the Ehrenfest classification and that (ii) although being reversible, it occurred differently when heating through the glass–liquid transition to that when cooling down in the liquid phase via vitrification. In contrast to typical second-order transformations, such as the formation of ferromagnetic or superconducting phases when the more ordered phase is located below the transition threshold, the configuron phase was located above it.

Investigation on Control Burned of Bagasse Ash on the Properties of Bagasse Ash-Blended Mortars

In recent years, partial replacement of cement with bagasse ash has been given attention for construction application due to its pozzolanic characteristics. Sugarcane bagasse ash and fine bagasse particles are abundant byproducts of the sugar industries and are disposed of in landfills. Our study presents the effect of burning bagasse at different temperatures (300 °C and 600 °C) on the compressive strength and physical properties of bagasse ash-blended mortars. Experimental results have revealed that bagasse produced more amorphous silica with very low carbon contents when it was burned at 600 °C/2 h. The compressive strength of mortar was improved when 5% bagasse ash replaced ordinary portland cement (OPC) at early curing ages. The addition of 10% bagasse ash cement also increased the compressive strength of mortars at 14 and 28 days of curing. However, none of the bagasse ash-blended portland pozzolana cement (PPC) mortars have shown improvement on compressive strength with the addition of bagasse ash. Characterization of bagasse ash was done using XRD, DTA-TGA, SEM, and atomic absorption spectrometry. Moreover, durability of mortars was checked by measuring water absorption and apparent porosity for bagasse ash-blended mortars.

Reactivity of Single Transition Metal Atoms on a Hydroxylated Amorphous Silica Surface: A Periodic Conceptual DFT Investigation

The drive to develop maximal atom-efficient catalysts coupled to the continuous striving for more sustainable reactions has led to an ever-increasing interest in single-atom catalysis. Based on a periodic conceptual density functional theory (cDFT) approach, fundamental insights into the reactivity and adsorption of single late transition metal atoms supported on a fully hydroxylated amorphous silica surface have been acquired. In particular, this investigation revealed that the influence of van der Waals dispersion forces is especially significant for a silver (98 %) or gold (78 %) atom, whereas the oxophilicity of the Group 8-10 transition metals plays a major role in the interaction strength of these atoms on the irreducible SiO₂ support. The adsorption energies for the less-electronegative row 4 elements (Fe, Co, Ni) ranged from -1.40 to -1.92 eV, whereas for the heavier row 5 and 6 metals, with the exception of Pd, these values are between -2.20 and -2.92 eV. The deviating behavior of Pd can be attributed to a fully filled d-shell and, hence, the absence of the hybridization effects. Through a systematic analysis of cDFT descriptors determined by using three different theoretical schemes, the Fermi weighted density of states approach was identified as the most suitable for describing the reactivity of the studied systems. The main advantage of this scheme is the fact that it is not influenced by fictitious Coulomb interactions between successive, charged reciprocal cells. Moreover, the contribution of the energy levels to the reactivity is simultaneously scaled based on their position relative to the Fermi level. Finally, the obtained Fermi weighted density of states reactivity trends show a good agreement with the chemical characteristics of the investigated metal atoms as well as the experimental data.

The Determination of Pore Shape and Interfacial Barrier of Entry for Light Gases Transport in Amorphous TEOS-Derived Silica: A Finite Element Method

The interfacial barrier of entry for light gas transport in a nanopore was a crucial factor to determine the separation efficiency in membrane technologies. To examine this effect, amorphous silica was prepared by sol-gel process, and its characterization results revealed that the commonly used cylindrical pore shape failed to represent the adsorption behavior of gases, but instead the pore shape had to be represented by a slit pore model. A finite element method (FEM) was developed to analyze the interfacial resistance by integrating a Lennard-Jones (LJ) potential over the layer area. It was found that the strong repulsion/attraction at the pore interface could be paired with the motion energy of guest molecules to predict the ideal selectivity between gases, thereby providing a solution to preliminarily screen the separation performance among a host of membrane candidates.

Effect of Silicon Dioxide Nanoparticles on Syrian Hamsters Infected by Opisthorchis felineus: 1H MRS Study of the Brain

In recent years, silicon dioxide nanoparticles have been widely used in medicine and the pharmaceutical industry, however, their effect on the brain has hardly been studied. We assessed the effects of long-term consumption of 5-nm amorphous silicon dioxide nanoparticles (SiO₂-NPs) by Syrian hamsters infected with the trematodes Opisthorchis felineus on the hippocampus and frontal cortex. Spectroscopic determination of brain neurometabolites, performed using a horizontal Magnetic Resonance Imaging system at 11.7 Tesla magnetic field, has shown that the ratio of the excitatory neurotransmitters (glutamate + glutamine + aspartate) to the inhibitory ones (GABA + glycine) was higher in the animals infected with O. felineus. However, pre-consumption of the SiO₂-NPs solution prevented this imbalance. In addition, the protective effect of SiO₂-NPs on the level of myo-inositol and glycine was found. It is concluded that the use of SiO₂-NPs can neutralize the negative effects of infectious factors on the brain.

Study of the Microstructure of Amorphous Silica Nanostructures Using High-Resolution Electron Microscopy, Electron Energy Loss Spectroscopy, X-ray Powder Diffraction, and Electron Pair Distribution Function

Silica has many industrial (i.e., glass formers) and scientific applications. The understanding and prediction of the interesting properties of such materials are dependent on the knowledge of detailed atomic structures. In this work, amorphous silica subjected to an accelerated alkali silica reaction (ASR) was recorded at different time intervals so as to follow the evolution of the structure by means of high-resolution transmission electron microscopy (HRTEM), electron energy loss spectroscopy (EELS), and electron pair distribution function (e-PDF), combined with X-ray powder diffraction (XRPD). An increase in the size of the amorphous silica nanostructures and nanopores was observed by HRTEM, which was accompanied by the possible formation of Si–OH surface species. All of the studied samples were found to be amorphous, as observed by HRTEM, a fact that was also confirmed by XRPD and e-PDF analysis. A broad diffuse peak observed in the XRPD pattern showed a shift toward higher angles following the higher reaction times of the ASR-treated material. A comparison of the EELS spectra revealed varying spectral features in the peak edges with different reaction times due to the interaction evolution between oxygen and the silicon and OH ions. Solid-state nuclear magnetic resonance (NMR) was also used to elucidate the silica nanostructures.

How Reversible Are the Effects of Fumed Silica on Macrophages? A Proteomics-Informed View

Synthetic amorphous silica is one of the most used nanomaterials, and numerous toxicological studies have studied its effects. Most of these studies have used an acute exposure mode to investigate the effects immediately after exposure. However, this exposure modality does not allow the investigation of the persistence of the effects, which is a crucial aspect of silica toxicology, as exemplified by crystalline silica. In this paper, we extended the investigations by studying not only the responses immediately after exposure but also after a 72 h post-exposure recovery phase. We used a pyrolytic silica as the test nanomaterial, as this variant of synthetic amorphous silica has been shown to induce a more persistent inflammation in vivo than precipitated silica. To investigate macrophage responses to pyrolytic silica, we used a combination of proteomics and targeted experiments, which allowed us to show that most of the cellular functions that were altered immediately after exposure to pyrolytic silica at a subtoxic dose, such as energy metabolism and cell morphology, returned to normal at the end of the recovery period. However, some alterations, such as the inflammatory responses and some aldehyde detoxification proteins, were persistent. At the proteomic level, other alterations, such as proteins implicated in the endosomal/lysosomal pathway, were also persistent but resulted in normal function, thus suggesting cellular adaptation.

Fabrication and Performance Evaluation of Industrial Alumina Based Graded Ceramic Substrate for CO2 Selective Amino Silicate Membrane

The present study mainly focuses on the careful design of an amino-silicate membrane integrated on an asymmetric graded membrane substrate, comprised of a cost-effective macroporous industrial alumina based ceramic support with a systematic graded assemblage of sol-gel derived γ-alumina intermediate and silica-CTAB sublayer-based multilayered interface, specifically dedicated for the separation of CO₂ gas from the binary gas mixture (CO₂/N₂) under nearly identical flue gas atmospheric conditions. The tailor-made industrial α-alumina-based porous ceramic support has been characterized in terms of apparent porosity, bulk density, flexural strength, microstructural feature, pore size, and its distribution to demonstrate its application feasibility toward the evolution of the subsequent membrane structure. The near surface morphology of the subsequent intermediate and submembrane layer has been carefully controlled via precisely scheming the colloidal chemistry and consequently implementing it during the deposition process of the respective γ-alumina and silica-CTAB precursor sols, whereas the potentiality of the quarantined amine groups in the final amino-silicate membrane has been methodically optimized by the appropriate heat treatment process. Finally, the real-time applicability of the hybrid amino-silicate membrane has been evaluated in terms of systematic analysis of the binary gas (CO₂/N₂) separation performance under variable operating conditions. The investigated ceramic membrane exhibited optimum CO₂ permeance of 46.44 GPU with a CO₂/N₂ selectivity of 12.5 at 80 °C under a trans-membrane pressure drop of 0.8 bar having a feed and sweep side water flow rate of 0.03 mL/min, which shows its performance reliability at nearly identical flue gas operating conditions.

Toxicologic Evaluation for Amorphous Silica Nanoparticles: Genotoxic and Non-Genotoxic Tumor-Promoting Potential

Amorphous silica nanoparticles (SiO₂NPs) have been widely used in medicine including targeted drug/DNA delivery, cancer therapy, and enzyme immobilization. Nevertheless, SiO₂NPs should be used with caution due to safety concerns associated with unique physical and chemical characteristics. The objective of this study was to determine the effects of SiO₂NPs on genotoxic and non-genotoxic mechanisms associated with abnormal gap junctional intercellular communication (GJIC) in multistage carcinogenesis. The SiO₂NPs exhibited negative responses in standard genotoxicity tests including the Ames test, chromosome aberration assay, and micronucleus assay. In contrast, the SiO₂NPs significantly induced DNA breakage in comet assay. Meanwhile, SiO₂NPs inhibited GJIC based on the results of scrape/loading dye transfer assay for the identification of non-genotoxic tumor-promoting potential. The reduction in expression and plasma membrane localization of Cx43 was detected following SiO₂NP treatment. Particularly, SiO₂NP treatment increased Cx43 phosphorylation state, which was significantly attenuated by inhibitors of extracellular signal-regulated kinases 1/2 (ERK1/2) and threonine and tyrosine kinase (MEK), but not by protein kinase C (PKC) inhibitor. Taken together, in addition to a significant increase in DNA breakage, SiO₂NP treatment resulted in GJIC dysregulation involved in Cx43 phosphorylation through the activation of mitogen-activated protein kinase (MAPK) signaling. Overall findings of the genotoxic and non-genotoxic carcinogenic potential of SiO₂NPs provide useful toxicological information for clinical application at an appropriate dose.

Amorphous Silicon Oxynitrophosphide-Coated Implants Boost Angiogenic Activity of Endothelial Cells

Lack of osteointegration is a major cause of aseptic loosening and failure of implants used in bone replacement. Implants coated with angiogenic biomaterials can improve osteointegration and potentially reduce these complications. Silicon- and phosphorus-based materials have been shown to upregulate expression of angiogenic factors and improve endothelial cell functions. In the present study, we hypothesize that implants coated with amorphous silica-based coatings in the form of silicon oxynitrophosphide (SiONP) by using plasma-enhanced chemical vapor deposition (PECVD) technique could enhance human umbilical vein endothelial cell angiogenic properties in vitro. The tested groups were: glass coverslip (GCS), tissue culture plate, SiON, SiONP1 (O: 7.3 at %), and SiONP2 (O: 14.2 at %) implants. The SiONP2 composition demonstrated 3.5-fold more fibronectin deposition than the GCS (p < 0.001). The SiONP2 group also presented a significant improvement in the capillary tubule length and thickness compared with the other groups (p < 0.01). At 24 h, we observed at least a twofold upregulation of vascular endothelial growth factor A, hypoxia-inducible factor-1α, angiopoietin-1, and nesprin-2, more evident in the SiONP1 and SiONP2 groups. In conclusion, the studied amorphous silica-coated implants, especially the SiONP2 composition, could enhance the endothelial cell angiogenic properties in vitro and may induce faster osteointegration and healing. Impact Statement In this study, we report for the first time the significant enhancement of human umbilical vein endothelial cell angiogenic properties (in vitro) by the amorphous silica-based coatings in the form of silicon oxynitrophosphide (SiONP). The SiONP2 demonstrated 3.5-fold more fibronectin deposition than the glass coverslip and presented a significant improvement in the capillary tubule length and thickness. At 24 h, SiONP reported twofold upregulation of vascular endothelial growth factor A, hypoxia-inducible factor-1α, angiopoietin-1, and nesprin-2. The studied amorphous silica-coated implants enhance the endothelial cell angiogenic properties in vitro and may induce faster osteointegration and healing.

Effect of Domain Size, Boundary, and Loading Conditions on Mechanical Properties of Amorphous Silica: A Reactive Molecular Dynamics Study

Mechanical properties are very important when choosing a material for a specific application. They help to determine the range of usefulness of a material, establish the service life, and classify and identify materials. The size effect on mechanical properties has been well established numerically and experimentally. However, the role of the size effect combined with boundary and loading conditions on mechanical properties remains unknown. In this paper, by using molecular dynamics (MD) simulations with the state-of-the-art ReaxFF force field, we study mechanical properties of amorphous silica (e.g., Young's modulus, Poisson's ratio) as a function of domain size, full-/semi-periodic boundary condition, and tensile/compressive loading. We found that the domain-size effect on Young's modulus and Poisson's ratio is much more significant in semi-periodic domains compared to full-periodic domains. The results, for the first time, revealed the bimodular and anisotropic nature of amorphous silica at the atomic level. We also defined a "safe zone" regarding the domain size, where the bulk properties of amorphous silica can be reproducible, while the computational cost and accuracy are in balance.

Molecular Dynamics Simulation Study of Solid Vibration Permeation in Microporous Amorphous Silica Network Voids

Microporous silica membranes have silica polymer network voids smaller than 3 Å where only small gas molecules such as helium (2.6 Å) and hydrogen (2.89 Å) can be transported. These silica membranes are highly expected to be available for H₂ separation. In order to examine gas permeation mechanisms in the silica polymer network voids, factors such as membrane porous structures, gas diffusivity, and gas permeability were studied via membrane permeation molecular dynamics simulation. The thermal motions of silica membrane constituent atoms were examined according to classic harmonic oscillation potential using a suitable amorphous silica structure and non-equilibrium molecular dynamics (NEMD) simulations of gas permeation. The dynamic model successfully simulated the gas permeation characteristics in an amorphous silica membrane with a suitable Hooke’s potential parameter. The introduction of the oscillative thermal motion of the membrane atoms enhanced gas diffusivity. Helium and hydrogen diffusivity and permeability were analyzed using gas translation (GT) and solid vibration (SV) models. The diffusion distance of gas molecules between adsorption sites was around 5.5–7 Å. The solid-type vibration frequencies of gas molecules in the site were on the order of 10¹³ and were reasonably smaller for heavier helium than for hydrogen. Both the GT and SV models could explain the temperature dependency of helium and hydrogen gas diffusivities, but the SV model provided a more realistic geometrical representation of the silica membrane. The SV model also successfully explained gas permeability in an actual silica membrane as well as the virtual amorphous silica membrane.

Evidence for Contamination of Silica Microparticles in Advanced Platelet-Rich Fibrin Matrices Prepared Using Silica-Coated Plastic Tubes

Platelet-rich fibrin (PRF) therapy has been widely applied in regenerative dentistry, and PRF preparation has been optimized to efficiently form fibrin clots using plain glass tubes. Currently, a shortage of commercially available glass tubes has forced PRF users to utilize silica-coated plastic tubes. However, most plastic tubes are approved by regulatory authorities only for diagnostic use and remain to be approved for PRF therapy. To clarify this issue, we quantified silica microparticles incorporated into the PRF matrix. Blood samples were collected into three different brands of silica-containing plastic tubes and were immediately centrifuged following the protocol for advanced-PRF (A-PRF). Advanced-PRF-like matrices were examined using a scanning electron microscope (SEM), and silica microparticles were quantified using a spectrophotometer. Each brand used silica microparticles of specific size and appearance. Regardless of tube brands and individual donors, significant, but not accidental, levels of silica microparticles were found to be incorporated into the A-PRF-like matrix, which will be consequently incorporated into the implantation sites. Presently, from the increasing data for cytotoxicity of amorphous silica, we cannot exclude the possibility that such A-PRF-like matrices negatively influence tissue regeneration through induction of inflammation. Further investigation should be performed to clarify such potential risks.

Cellular Responses of Industrially Relevant Silica Dust on Human Glial Cells In Vitro

Despite the rigorous emission control measures in the ferroalloy industry, there are still emissions of dust during the production of various alloys. Dust particles were collected from laboratory scale processes where oxide particulate matter was formed from liquid silicon (metallurgical grade). The dust was produced in a dry air atmosphere to mimic industrial conditions. To investigate possible effects of ultrafine dust on the central nervous system, a human astrocytic cell line was employed to investigate inflammatory effects of particles as astrocytes play a number of active and neuron supporting roles in the brain. Toxicity on the astrocytes by amorphous silica generated in laboratory scale was compared to crystalline macro-sized silica using several doses to determine toxicological dose response curves. The cell viability experiments indicated that low particle doses of amorphous silica induced a small nonsignificant reduction in cell viability compared to crystalline silica which led to increased levels of toxicity. The gene expression of amyloid precursor protein (APP), a biomarker of neurodegenerative disease, was affected by particle exposure. Furthermore, particle exposure, in a dose-and time-dependent manner, affected the ability of the cells to communicate through gap junction channels. In conclusion, in vitro studies using low doses of particles are important to understand mechanisms of toxicity of occupational exposure to silica particles. However, these studies cannot be extrapolated to real exposure scenarios at work place, therefore, controlling and keeping the particle exposure levels low at the work place, would prevent potential negative health effects.

Layered-Expanded Mesostructured Silicas: Generalized Synthesis and Functionalization

Mesostructured layered silicas have been prepared through a surfactant-assisted procedure using neutral alkylamines as templates and starting from atrane complexes as hydrolytic inorganic precursors. By adjusting the synthetic parameters, this kinetically controlled reproducible one-pot method allows for obtaining both pure and functionalized (inorganic or organically) lamellar silica frameworks. These are easily deconstructed and built up again, which provides a simple way for expanding the interlamellar space. The materials present high dispersibility, which results in stable colloidal suspensions.

Comparative Study of Water-Leaching and Acid-Leaching Pretreatment on the Thermal Stability and Reactivity of Biomass Silica for Viability as a Pozzolanic Additive in Cement

The present work aims to introduce a novel and eco-friendly method, i.e., a water-leaching pretreatment for extracting highly reactive biomass silica from rice husk (RH), for viability as a pozzolanic additive in cement. For comparison, the traditional acid pretreatment method was also employed throughout the experimental study. The silica from RH was extracted using boiled deionized water and acid solution as leaching agents to remove the alkali metal impurities, and then dried and submitted to pyrolysis treatment. The results indicated that potassium was found to be the major contaminant metal inducing the formation of undesirable black carbon particles and the decrease in crystallization temperature of amorphous RHA silica. The boiling-water-leaching pretreatment and acid-leaching pretreatment on RHs significantly removed the metallic impurities and reduced the crystallization sensitivity of RHA silica to calcination temperature. A highly reactive amorphous silica with purity of 96% was obtained from RH via 1 N hydrochloric acid leaching followed by controlled calcination at 600 °C for 2 h. The acid treatments increased the crystallization temperature of silica to 1200 °C and retained the amorphous state of silica for 2.5 h. In the case of water-leaching pretreatment, leaching duration for 2.5 h could yield an amorphous silica with purity of 94% and render the silica amorphous at 900 °C for 7 h. The RHA silica yielded by water-leaching pretreatment presented a comparable enhancing effect to that of acid leaching on hydration and improved the strength of cement. Furthermore, compared with the acid-leaching method, the water-leaching pretreatment method is more environmentally friendly and easier to operate, and hence more widely available.

Distribution of Paramagnetic Fe₂O₃/SiO₂⁻Core/Shell Nanoparticles in the Rat Lung Studied by Time-of-Flight Secondary Ion Mass Spectrometry: No Indication for Rapid Lipid Adsorption

Amorphous silica nanoparticles comprise a class of widely used industrial nanomaterials, which may elicit acute inflammation in the lung. These materials have a large specific surface to which components of the pulmonary micro-milieu can bind. To conduct appropriate binding studies, paramagnetic Fe₂O₃/SiO₂ core/shell nanoparticles (Fe-Si-NP) may be used as an easy-to-isolate silica surrogate, if several prerequisites are fulfilled. To this end, we investigated the distribution of Fe, Si, protein and phosphatidylcholine (PC) by Time-of-Flight secondary ion mass spectrometry (ToF-SIMS) in cryo-sections from the rat lungs to which Fe-Si-NP had been administered for 30 min. Regions-of-interest were identified and analyzed with incident light and enhanced dark-field microscopy (DFM). Fe-Si-NP particles (primary particle size by electron microscopy: 10–20 nm; aggregate size by tracking analysis: 190 ± 20 nm) and agglomerates thereof were mainly attached to alveolar walls and only marginally internalized by cells such as alveolar macrophages. The localization of Fe-Si-NP by DFM was confirmed by ToF-SIMS signals from both, Fe and Si ions. With respect to an optimized signal-to-noise ratio, Fe⁺, Si⁺, CH₄N⁺ and the PC head group (C₅H₁₅NO₄P⁺) were the most versatile ions to detect iron, silica, protein, and PC, respectively. Largely congruent Fe⁺ and Si⁺ signals demonstrated that the silica coating of Fe-Si-NP remained stable under the conditions of the lung. PC, as a major lipid of the pulmonary surfactant, was colocalized with the protein signal alongside alveolar septa, but was not detected on Fe-Si-NP, suggesting that silica nanoparticles do not adsorb lipids of the lung surfactant under native conditions. The study shows that ToF-SIMS is a valuable technique with adequate spatial resolution to analyze nanoparticles together with organic molecules in the lung. The paramagnetic Fe-Si-NP appear well suited to study the binding of proteins to silica nanomaterials in the lung.

Preparation and Gas Permeation Properties of Fluorine-Silica Membranes with Controlled Amorphous Silica Structures: Effect of Fluorine Source and Calcination Temperature on Network Size

Triethoxyfluorosilane (TEFS), which is a pendant-type alkoxysilane with a Si-F bond, was utilized for the development of a molecular sieving membrane. The effect that a source of fluorine and calcination temperature exerted on gas permeation properties and network pore size was evaluated via single-gas permeation properties across a wide range of temperatures. A TEFS membrane calcined at 350 °C showed high H₂ permeance (2.0 × 10^-6 mol m^-2 s^-1 Pa^-1) and high selectivity for H₂ over larger molecules (H₂/CF₄: >300; H₂/SF₆: >18 000), indicating that this network pore size would be suitable for a H₂ permselective membrane that could promote the process of methylcyclohexane (MCH) dehydrogenation to produce toluene (TOL). Based on the gas permeation properties and the results of XPS and FTIR, network pore size depended on the fluorine concentration incorporated in SiO₂ that existed as Si-F bonds, irrespective of the fluorine source. A TEFS membrane showed approximately the same pore size distribution and level of gas permeance, irrespective of calcination temperature (350 and 550 °C), due to the low Si-OH density in the networks as suggested by the result of FTIR, which can prevent the densification caused by the condensation of Si-OH groups. The pair distribution function also suggested that densification of the network structure for TEFS was apparently suppressed compared with that of a tetraethoxysilane (TEOS)-derived structure.

Pulmonary glass particles may persist in the lung suppressing function of immune cells

The health effects of silica may depend on the inherent properties of crystalline silica or on external factors affecting the biological activity or distribution of its polymorphs. Inhaled crystalline silica is classified as a Group I carcinogen, however, information on the health effects of amorphous silica is still insufficient. Considering that alveolar macrophages play a key role in both innate and adaptive immune responses for removal of foreign bodies that enter via the respiratory system, we treated sheet-like glass particles (SGPs), a type of noncrystalline amorphous silica, to MH-S cells, an alveolar macrophage cell line. SGPs reduced the generation of ROS and NO and induced cell death via multiple pathways. Although the expression of CD80, CD86, and CD40, increased by exposure to SGPs, the expression of MHC class II molecules had not notably changed. Additionally, expression of ICAM-1 tended to decrease. In mice, SGPs were distributed in the interstitial region of the lung without notable pathological lesion on day 14 after a single intratracheal instillation. Pulmonary total cell number increased significantly with the highest dose, but the levels of all measured inflammatory cytokines and chemokines, except IL-1, were lower in BAL fluid from SGP-treated mice compared to control. More interestingly, the expression of antigen presentation-related proteins was enhanced in the lungs of SGP-exposed mice concomitant with an increase in the number of mature dendritic cells, whereas the expression of ICAM-1, an important adhesion molecule for helper T cell recruitment, was suppressed. Taken together, we suggest that SGPs may induce adverse health effects by down-regulating function of immune cells in the lungs. Furthermore, ICAM-1 may play a key role in immune response to remove pulmonary SGPs.

Enhancement of ovalbumin-specific Th1, Th2, and Th17 immune responses by amorphous silica nanoparticles

Nanomaterials present in cosmetics and food additives are used for industrial applications. However, their safety profile is unclear. Amorphous silica nanoparticles (nSPs) are a widely used nanomaterial and have been shown to induce inflammatory cytokines following intratracheal administration in mice. The current study investigated the adjuvant effect of nSP30 (nSP with a diameter of 33 nm) on T helper (Th)1, Th2, and Th17 immune responses as well as immunoglobulin (Ig) levels in mice. BALB/c mice were intraperitoneally administered ovalbumin (OVA) with or without varying doses and varying sizes of nSPs. The adjuvant effect of nSPs was investigated by measuring OVA-specific IgG antibodies in sera, OVA-specific proliferative responses of splenocytes, and the production of Th1, Th2, and Th17 cytokines. Aluminum hydroxide was used as a positive adjuvant control. Anti-OVA IgG production, splenocyte proliferative responses, and secretion of IFN-γ, IL-2, IL-4, IL-5, and IL-17 were increased significantly in mice receiving a combined injection of nSP30 (30 or 300 µg) with OVA compared with OVA alone or a combined injection with nSP30 (3 µg). The responses were nSP30 dose-dependent. When different sized nSPs were used (with 30, 100, and 1000 nm diameters), the responses to OVA were enhanced and were size-dependent. The smaller sized nSP particles had a greater adjuvant effect. nSPs appear to exert a size-dependent adjuvant effect for Th1, Th2, and Th17 immune responses. Understanding the mechanisms of nSP adjuvanticity might lead to the development of novel vaccine adjuvants and therapies for allergic diseases caused by environmental factors.

Mesoporous silicas with tunable morphology for the immobilization of laccase

Siliceous ordered mesoporous materials (OMM) are gaining interest as supports for enzyme immobilization due to their uniform pore size, large surface area, tunable pore network and the introduction of organic components to mesoporous structure. We used SBA-15 type silica materials, which exhibit a regular 2D hexagonal packing of cylindrical mesopores of uniform size, for non-covalent immobilization of laccase. Synthesis conditions were adjusted in order to obtain supports with different particle shape, where those with shorter channels had higher loading capacity. Despite the similar isoelectric points of silica and laccase and the close match between the size of laccase and the pore dimensions of these SBA-15 materials, immobilization was achieved with very low leaching. Surface modification of macro-/mesoporous amorphous silica by grafting of amine moieties was proved to significantly increase the isoelectric point of this support and improve the immobilization yield.

Dysregulation of macrophage activation profiles by engineered nanoparticles

Although the potential human health impacts from exposure to engineered nanoparticles (ENPs) are uncertain, past epidemiological studies have established correlations between exposure to ambient air pollution particulates and the incidence of pneumonia and lung infections. Using amorphous silica and superparamagnetic iron oxide (SPIO) as model high production volume ENPs, we examined how macrophage activation by bacterial lipopolysaccharide (LPS) or the lung pathogen Streptococcus pneumoniae is altered by ENP pretreatment. Neither silica nor SPIO treatment elicited direct cytotoxic or pro-inflammatory effects in bone marrow-derived macrophages. However, pretreatment of macrophages with SPIO caused extensive reprogramming of nearly 500 genes regulated in response to LPS challenge, hallmarked by exaggerated activation of oxidative stress response pathways and suppressed activation of both pro- and anti-inflammatory pathways. Silica pretreatment altered regulation of only 67 genes, but there was strong correlation with gene sets affected by SPIO. Macrophages exposed to SPIO displayed a phenotype suggesting an impaired ability to transition from an M1 to M2-like activation state, characterized by suppressed IL-10 induction, enhanced TNFα production, and diminished phagocytic activity toward S. pneumoniae. Studies in macrophages deficient in scavenger receptor A (SR-A) showed SR-A participates in cell uptake of both the ENPs and S. pneumonia and co-regulates the anti-inflammatory IL-10 pathway. Thus, mechanisms for dysregulation of innate immunity exist by virtue that common receptor recognition pathways are used by some ENPs and pathogenic bacteria, although the extent of transcriptional reprogramming of macrophage function depends on the physicochemical properties of the ENP after internalization. Our results also illustrate that biological effects of ENPs may be indirectly manifested only after challenging normal cell function. Nanotoxicology screening strategies should therefore consider how exposure to these materials alters susceptibility to other environmental exposures.