Rugged Island-Bridge Inorganic Electronics Mounted on Locally Strain-Isolated Substrates

Various strain isolation strategies that combine rigid and stretchable regions for stretchable electronics were recently proposed, but the vulnerability of inorganic materials to mechanical stress has emerged as a major impediment to their performance. We report a strain-isolation system that combines heteropolymers with different elastic moduli (i.e., hybrid stretchable polymers) and utilize it to construct a rugged island-bridge inorganic electronics system. Two types of prepolymers were simultaneously cross-linked to form an interpenetrating polymer network at the rigid-stretchable interface, resulting in a hybrid stretchable polymer that exhibited efficient strain isolation and mechanical stability. The system, including stretchable micro-LEDs and microheaters, demonstrated consistent operation under external strain, suggesting that the rugged island-bridge inorganic electronics mounted on a locally strain-isolated substrate offer a promising solution for replacing conventional stretchable electronics, enabling devices with a variety of form factors.

Superdurable Full-Life Superhydrophobic Composite Block

Superhydrophobic materials are attractive for industrial development but plagued by poor mechanical stability. Herein, a superdurable full-life superhydrophobic composite block is designed and fabricated by embedding near-zero contractive superhydrophobic silica aerogel into a rigid iron-nickel foam structured similarly to a regular dodecahedron. The synergistic protection afforded by these materials ensures superrobust mechanical stability for the composite block, which features a high compressive strength of up to ≈7.4 MPa, and ultralow Taber abrasion of down to ≈0.567 mm after withstanding 50 000 cycles, and highly efficient water harvesting capability of up to ≈3114.3 mg min-1 cm-2 at a supercooling degree of 40 K. This robust material system provides a novel strategy to design superhydrophobic materials capable of withstanding extreme conditions, including high temperature, humidity, pressure, and abrasion.

External Pressure in Polymer-Based Lithium Metal Batteries: An Often-Neglected Criterion When Evaluating Cycling Performance?

Solid-state batteries based on lithium metal anodes, solid electrolytes, and composite cathodes constitute a promising battery concept for achieving high energy density. Charge carrier transport within the cells is governed by solid-solid contacts, emphasizing the importance of well-designed interfaces. A key parameter for enhancing the interfacial contacts among electrode active materials and electrolytes comprises externally applied pressure onto the cell stack, particularly in the case of ceramic electrolytes. Reports exploring the impact of external pressure on polymer-based cells are, however, scarce due to overall better wetting behavior. In this work, the consequences of externally applied pressure in view of key performance indicators, including cell longevity, rate capability, and limiting current density in single-layer pouch-type NMC622||Li cells, are evaluated employing cross-linked poly(ethylene oxide), xPEO, and cross-linked cyclodextrin grafted poly(caprolactone), xGCD-PCL. Notably, externally applied pressure substantially changes the cell's electrochemical cycling performance, strongly depending on the mechanical properties of the considered polymers. Higher external pressure potentially enhances electrode-electrolyte interfaces, thereby boosting the rate capability of pouch-type cells, despite the fact that the cell longevity may be reduced upon plastic deformation of the polymer electrolytes when passing beyond intrinsic thresholds of compressive stress. For the softer xGCD-PCL membrane, cycling of cells is only feasible in the absence of external pressure, whereas in the case of xPEO, a trade-off between enhanced rate capability and minimal membrane deformation is achieved at cell pressures of ≤0.43 MPa, which is considerably lower and more practical compared to cells employing ceramic electrolytes with ≥5 MPa external pressure.

Dynamic Structures and Fast Transition Kinetics of Oxidized G-Quadruplexes

8-oxoguanines (8-oxoG) in cells form compromised G-quadruplexes (GQs), which may vary GQ mediated gene regulations. By mimicking molecularly crowded cellular environment using 40% DMSO or sucrose, here it is found that oxidized human telomeric GQs have stabilities close to the wild-type (WT) GQs. Surprisingly, while WT GQs show negative formation cooperativity between a Pt(II) binder and molecularly crowded environment, positive cooperativity is observed for oxidized GQ formation. Single-molecule mechanical unfolding reveals that 8-oxoG sequence formed more diverse and flexible structures with faster folding/unfolding transition kinetics, which facilitates the Pt(II) ligand to bind the best-fit structures with positive cooperativity. These findings offer new understanding on structures and properties of oxidized G-rich species in crowded environments. They also provide insights into the design of better ligands to target oxidized G-rich structures formed under oxidative cell stress.

Injectable and In Situ Formed Dual-Network Hydrogel Reinforced by Mesoporous Silica Nanoparticles and Loaded with BMP-4 for the Closure and Repair of Skull Defects

Bone defects are a common and challenging orthopedic problem with poor self-healing ability and long treatment cycles. The difficult-to-heal bone defects cause a significant burden of medical expenses on patients. Currently, biomaterials with mechanical stability, long-lasting action, and osteogenic activity are considered as a suitable way to effectively heal bone defects. Here, an injectable double network (DN) hydrogel prepared using physical and chemical cross-linking methods is designed. The first rigid network is constructed using methylpropenylated hyaluronic acid (HAMA), while the addition of chitosan oligosaccharide (COS) forms a second flexible network by physical cross-linking. The mesoporous silica nanoparticles (MSN) loaded with bone morphogenetic protein-4 (BMP-4) were embedded into DN hydrogel, which not only enhanced the mechanical stability of the hydrogel, but also slowly released BMP-4 to achieve long-term skull repair. The designed composite hydrogel showed an excellent compression property and deformation resistance. In vitro studies confirmed that the HAMA/COS/MSN@BMP-4 hydrogel had good biocompatibility and showed great potential in supporting proliferation and osteogenic differentiation of mouse embryo osteoblast precursor (MC3T3-E1) cells. Furthermore, in vivo studies confirmed that the DN hydrogel successfully filled and closed irregular skull defect wounds, effectively promoted bone regeneration, and significantly promoted bone repair compared with the control group. In addition, HAMA/COS/MSN@BMP-4 hydrogel precursor solution can quickly form hydrogel in situ at the wound by ultraviolet light, which can be applied to the closure and repair of wounds of different shapes, which provides the new way for the treatment of bone defects.

Nucleosome Dynamics Derived at the Single-Molecule Level Bridges Its Structures and Functions

Nucleosome, the building block of chromatin, plays pivotal roles in all DNA-related processes. While cryogenic-electron microscopy (cryo-EM) has significantly advanced our understanding of nucleosome structures, the emerging field of single-molecule force spectroscopy is illuminating their dynamic properties. This technique is crucial for revealing how nucleosome behavior is influenced by chaperones, remodelers, histone variants, and post-translational modifications, particularly in their folding and unfolding mechanisms under tension. Such insights are vital for deciphering the complex interplay in nucleosome assembly and structural regulation, highlighting the nucleosome's versatility in response to DNA activities. In this Perspective, we aim to consolidate the latest advancements in nucleosome dynamics, with a special focus on the revelations brought forth by single-molecule manipulation. Our objective is to highlight the insights gained from studying nucleosome dynamics through this innovative approach, emphasizing the transformative impact of single-molecule manipulation techniques in the field of chromatin research.

Achieving Record-High Stretchability and Mechanical Stability in Organic Photovoltaic Blends with a Dilute-absorber Strategy

Organic solar cells (OSCs) have potential for applications in wearable electronics. Except for high power conversion efficiency (PCE), excellent tensile properties and mechanical stability are required for achieving high-performance wearable OSCs, while the present metrics barely meet the stretchable requirements. Herein, this work proposes a facile and low-cost strategy for constructing intrinsically stretchable OSCs by introducing a readily accessible polymer elastomer as a diluent for all-polymer photovoltaic blends. Remarkably, record-high stretchability with a fracture strain of up to 1000% and mechanical stability with elastic recovery >90% under cyclic tensile tests are realized in the OSCs active layers for the first time. Specifically, the tensile properties of best-performing all-polymer photovoltaic blends are increased by up to 250 times after blending. Previously unattainable performance metrics (fracture strain >50% and PCE >10%) are achieved simultaneously for the resulting photovoltaic films. Furthermore, an overall evaluation parameter y is proposed for the efficiency-cost- stretchability balance of photovoltaic blend films. The y value of dilute-absorber system is two orders of magnitude greater than those of prior state-of-the-art systems. Additionally, intrinsically stretchable devices are prepared to showcase the mechanical stability. Overall, this work offers a new avenue for constructing and comprehensively evaluating intrinsically stretchable organic electronic films.

Functionalization of a zirconia surface by covalently immobilized fibronectin and its effects on resistance to thermal, acid, and mechanical exposure

Silane chemistry has emerged as a powerful tool for surface modification, offering a versatile means to enhance the properties of various substrates, such as dental implant abutment materials. In this study, we investigated the stability of the 3-aminopropyldiisopropylethoxysilane (APDS) layer on yttria-partially stabilized zirconia (Y-TZP) surfaces after mechanical, acid, and thermal treatment in order to simulate fluctuations within the oral cavity. To accomplish that, the viability of human gingival fibroblasts on APDS-modified surfaces after applied treatment strategies was assessed by live/dead staining. Moreover, the hydrolysis stability and enzymatic degradation resistance of crosslinked fibronectin to the APDS layer was examined by immunostaining and western blot. The results revealed that the applied modifications were not affected by the different treatment conditions and could withstand the fluctuations in the oral cavity. Furthermore, crosslinked fibronectin on silanized Y-TZP was stable against hydrolysis over 21 days and enzymatic degradation. We thus can conclude that the proposed functionalization method has high potential to tolerate harmful effects within the oral cavity and remains unchanged on the surface.

Polymer-Entangled Spontaneous Pseudo-Planar Heterojunction for Constructing Efficient Flexible Organic Solar Cells

Flexible organic solar cells (FOSCs) have attracted considerable attention from researchers as promising portable power sources for wearable electronic devices. However, insufficient power conversion efficiency (PCE), intrinsic stretchability, and mechanical stability of FOSCs remain severe obstacles to their application. Herein, an entangled strategy is proposed for the synergistic optimization of PCE and mechanical properties of FOSCs through green sequential printing combined with polymer-induced spontaneous gradient heterojunction phase separation morphology. Impressively, the toughened-pseudo-planar heterojunction (Toughened-PPHJ) film exhibits excellent tensile properties with a crack onset strain (COS) of 11.0%, twice that of the reference bulk heterojunction (BHJ) film (5.5%), which is among the highest values reported for the state-of-the-art polymer/small molecule-based systems. Finite element simulation of stress distribution during film bending confirms that Toughened-PPHJ film can release residual stress well. Therefore, this optimal device shows a high PCE (18.16%) with enhanced (short-circuit current density) JSC and suppressed energy loss, which is a significant improvement over the conventional BHJ device (16.99%). Finally, the 1 cm2 flexible Toughened-PPHJ device retains more than 92% of its initial PCE (13.3%) after 1000 bending cycles. This work provides a feasible guiding idea for future flexible portable power supplies.

Material and Device Design of Flexible Perovskite Solar Cells for Next-Generation Power Supplies

This review outlines the rapid evolution of flexible perovskite solar cells (f-PSCs) to address the urgent need for alternative energy sources, highlighting their impressive power conversion efficiency, which increases from 2.62% to over 24% within a decade. The unique optoelectronic properties of perovskite materials and their inherent mechanical flexibilities instrumental in the development of f-PSCs are examined. Various strategies proposed for material modification and device optimization significantly enhance efficiency and bending durability. The transition from small-scale devices to large-area photovoltaic modules for diverse applications is discussed in addition to the challenges and innovative solutions related to film uniformity and environmental stability. This review provides succinct yet comprehensive insights into the development of f-PSCs, paving the way for their integration into various applications and highlighting their potential in the renewable energy landscape.

Structure, dynamics, and stability of the smallest and most complex 71 protein knot

Proteins can spontaneously tie a variety of intricate topological knots through twisting and threading of the polypeptide chains. Recently developed artificial intelligence algorithms have predicted several new classes of topological knotted proteins, but the predictions remain to be authenticated experimentally. Here, we showed by X-ray crystallography and solution-state NMR spectroscopy that Q9PR55, an 89-residue protein from Ureaplasma urealyticum, possesses a novel 71 knotted topology that is accurately predicted by AlphaFold 2, except for the flexible N terminus. Q9PR55 is monomeric in solution, making it the smallest and most complex knotted protein known to date. In addition to its exceptional chemical stability against urea-induced unfolding, Q9PR55 is remarkably robust to resist the mechanical unfolding-coupled proteolysis by a bacterial proteasome, ClpXP. Our results suggest that the mechanical resistance against pulling-induced unfolding is determined by the complexity of the knotted topology rather than the size of the molecule.

Study of mechanical, optical, and thermoelectric characteristics of Ba2 XMoO6 (X = Zn, Cd) double perovskite for energy harvesting

The double perovskites are become the emerging aspirant to fulfill the demand of energy. Therefore, the optoelectronic, elastic and transport characteristics of Ba2 XMoO6 (X = Zn, Cd) are addressed systemically. The elastic constants show the mechanical stability. The nature of Ba2 ZnMoO6 is brittle and Ba2 CdMoO6 is ductile with large values of Debye temperature covalent bonding. The electronic band structures exhibit band gaps of 2.81 and 2.98 eV, which increase their importance for optoelectronic applications. The absorption of light energy, optical loss, refractive index, polarization of light energy are addressed in the energy range zero to 14 eV. Furthermore, thermoelectric characteristics are computed against chemical potentials at 300, 600, and 900 K. The chemical potential decides the p-type nature, with holes as majority carriers. The increasing temperature increases the power factor and figure of merit. Therefore, the optoelectronic and thermoelectric characteristics reveals the importance of studied DPs for energy applications.

Combining Chitosan, Stearic Acid, and (Cu-, Zn-) MOFs to Prepare Robust Superhydrophobic Coatings with Biomedical Multifunctionalities

There is an urgent need to develop a series of multifunctional materials with good biocompatibility, high mechanical strength, hemostatic properties, antiadhesion, and anti-infection for applications in wound care. However, successfully developing multifunctional materials is challenging. In this study, two superhydrophobic composite coatings with good biocompatibility, high mechanical strength, strong antifouling and blood repellency, fast hemostasis, and good antibacterial activity are prepared on cotton fabric surface by simple, green, and low-cost one-step dip-coating technology. The results discussed in the manuscript reveals that the two superhydrophobic composite coatings can maintain good mechanical stability, strong water repellency, and durability under various types of mechanical damage, high-temperature treatment, and long-term strong light irradiation. The coatings also exhibit good repellency to various solid pollutants, highly viscous liquid pollutants, and blood. In vitro and in vivo hemostatic experiments show that both composite coatings have good hemostatic and anticlot adhesion properties. More importantly, this superhydrophobic coating prevents bacterial adhesion and growth and released Cu2+ and Zn2+ ions and chitosan to achieve bactericidal properties, thereby protecting injured skin from bacterial infection. The two superhydrophobic coatings enhance the antifouling, antiadhesion, hemostatic, and antibacterial functions of blood-repellent dressings and therefore have broad application prospects in medical and textile fields.

CDs Regulated Sulfur-Based Flexible Electrode with Range pH Values for Efficient and Durable Hydrogen Evolution Reaction

How to mildly structure a high intrinsic activity and stable catalytic electrode to realize long-term catalytic water splitting to produce hydrogen at a wide range of pH values at industrial high current is a challenge. Herein, this work creatively proposes to prepare industrial-grade catalytic electrodes with high efficiency and stability at high current density through carbon quantum dots (CDs) modification nickel sulfide on hydrophilic flexible filter paper via one-step mild chemical plating (denoted as CDs-Ni3 S2 @HFP). The intrinsic activity and surface area, electron transfer ability, and corrosion resistance of Ni3 S2 material are increased due to the regulation, homogenous, and high concentration doping of CDs. The overpotential of the flexible catalytic electrode is only 30, 35, and 87 mV in 1 m KOH, simulated seawater (1 m KOH + 0.5 m NaCl), and neutral electrolyte (0.5 m PBS) at a current density of 10 mA cm-2 . More attractively, the CDs-Ni3 S2 @HFP electrode achieves over 500 h of efficient and stable catalysis at industrial high current density (500 mA cm-2 ). Due to the advantages of mild, universal, and large-area preparation of catalytic materials, this work provides technical support for flexible catalytic electrodes in efficient catalysis toward water splitting, energy storage, and device preparation.

Highly Flexible and Foldable Paper-Based Thermoelectric Generator Prepared with Post-Treatment-Free PEDOT:PSS Hybrid Ink

Paper-based thermoelectric (PTE) generators have recently emerged as a green technology that can help alleviate environment pollution and the energy crisis. In this work, a PTE generator was prepared by coating a post-treatment-free thermoelectric ink consisting of poly(3,4-ethylenedioxythiophene)/polystyrene sulfonate (PEDOT:PSS) doped with 1-ethyl-3-methylimidazolium:tricyanomethanide (EMIM:TCM) onto the card paper. By tuning the molar concentration of the EMIM:TCM to 0.17 M and with hot-pressing, the PTE generator showed a decent power factor (PF) value of 6.82 μW m-1 K-2, which was higher than the values of PTE in the literature. This phenomenon could be attributed to the synergistic effect of high-performance thermoelectric ink (i.e., PF = 175 μW m-1 K-2 when deposited on glass slide) and the hot-pressing. The hot-pressing enhanced the packing density of cellulose fibers and the associated PEDOT:PSS hybrid, which enabled the formation of long-range conductive paths. In addition, the PTE had good mechanical stability, indicated by no significant change of the power factor values after cyclic folding 10,000 times. Moreover, the structure of as-prepared PTE could be easily tuned into different shapes that are promising for the preparation of flexible wearable thermoelectric generators.

Low-Temperature Predicted Structures of Ag2S (Silver Sulfide)

Silver sulfide phases, such as body-centered cubic argentite and monoclinic acanthite, are widely known. Traditionally, acanthite is regarded as the only low-temperature phase of silver sulfide. However, the possible existence of other low-temperature phases of silver sulfide cannot be ruled out. Until now, there have been only a few suggestions about low-temperature Ag2S phases that differ from monoclinic acanthite. The lack of a uniform approach has hampered the prediction of such phases. In this work, the use of such an effective tool as an evolutionary algorithm for the first time made it possible to perform a broad search for the model Ag2S phases of silver sulfide, which are low-temperature with respect to cubic argentite. The possibility of forming Ag2S phases with cubic, tetragonal, orthorhombic, trigonal, monoclinic, and triclinic symmetry is considered. The calculation of the cohesion energy and the formation enthalpy show, for the first time, that the formation of low-symmetry Ag2S phases is energetically most favorable. The elastic stiffness constants cij of all predicted Ag2S phases are computed, and their mechanical stability is determined. The densities of the electronic states of the predicted Ag2S phases are calculated. The prediction of low-temperature Ag2S structures indicates the possibility of synthesizing new silver sulfide phases with improved properties.

Robust All-Waterborne Superhydrophobic Coating with Photothermal Deicing and Passive Anti-icing Properties

The compelling integration of superhydrophobic coatings with light-to-heat conversion capabilities has garnered substantial interest due to their dual functionality encompassing passive anti-icing and deicing attributes. However, the insufficient mechanical stability and the environmental and human health concerns stemming from the extensive use of organic solvents limit their practical application. In this study, an all-waterborne superhydrophobic photothermal coating (PCPAS) was prepared through the synergy of composite micro-nanoparticles derived from carbon nanotubes (CNT), polydopamine (PDA), and Ag particles with fluorine-containing polyacrylic emulsion (PFA). The PDA provided active sites for Ag+ reduction reaction and enhanced the interfacial interaction between CNT and Ag particles. The interfacial enhancement enabled the coating to maintain stable superhydrophobicity after 260 times sandpaper abrasion and 240 times tape peeling. Simultaneously, the composite micro-nanoparticle's light-to-heat conversion ability gave the coating excellent anti-icing/deicing capabilities. Under the condition of -20 °C, the freezing time of 30 μL of water droplets was extended to 392 s, and 2 × 2 × 2 cm ice cubes placed on the surface of the coating could completely melt after only 1142 s under simulated sunlight irradiation with a 1 kW/m2 intensity. In addition, the coating also had suitable self-cleaning properties and substrate applicability. The comprehensive attributes of this all-waterborne photothermal superhydrophobic coating render it a promising contender for anti-icing and deicing applications in challenging outdoor environments.

Ultraviolet-Assisted Printing of Flexible Solid-State Zn-Ion Battery with a Heterostructure Electrolyte

Flexible solid-state Zn-ion batteries (ZIBs) have garnered considerable attention for next-generation power sources, but the corrosion, dendrite growth, and interfacial problems severely hinder their practical applications. Herein, a high-performance flexible solid-state ZIB with a unique heterostructure electrolyte is facilely fabricated through ultraviolet-assisted printing strategy. The solid polymer/hydrogel heterostructure matrix not only isolates water molecules and optimizes electric field distribution for dendrite-free anode, but also facilitates fast and in-depth Zn2+ transport in the cathode. The in situ ultraviolet-assisted printing creates cross-linked and well-bonded interfaces between the electrodes and the electrolyte, enabling low ionic transfer resistance and high mechanical stability. As a result, the heterostructure electrolyte based ZIB outperforms single-electrolyte based cells. It not only delivers a high capacity of 442.2 mAh g-1 with long cycling life of 900 cycles at 2 A g-1 , but also maintains stable operation under mechanical bending and high-pressure compression in a wide temperature range (-20 °C to 100 °C).

Investigating the Sulfonated Chitosan/Polyvinylidene Fluoride-Based Proton Exchange Membrane with fSiO2 as Filler in Microbial Fuel Cells

Chitosan (CS), a promising potential biopolymer with exquisite biocompatibility, economic viability, hydrophilicity, and chemical modifications, has drawn interest as an alternative material for proton exchange membrane (PEM) fabrication. However, CS in its original form exhibited low proton conductivity and mechanical stability, restricting its usage in PEM development. In this work, chitosan was functionalized (sulfonic acid (-SO3H) groups)) to enhance proton conductivity. The sulfonated chitosan (sCS) was blended with polyvinylidene fluoride (PVDF) polymer, along with the incorporation of functionalized SiO2 (-OH groups), for fabricating chitosan-based composite proton exchange membranes to enhance microbial fuel cell (MFC) performances. The results show that adding functionalized inorganic fillers (fSiO2) into the membrane enhances the mechanical, thermal, and anti-biofouling behavior. From the results, the PVDF/sCS/fSiO2 composite membrane exhibited enhanced proton conductivity 1.0644 × 10-2 S cm-1 at room temperature and increased IEC and mechanical and chemical stability. Furthermore, this study presents a revolutionary way to generate environmentally friendly natural polymer-based membrane materials for developing PEM candidates for enhanced MFC performances in generating bioelectricity and wastewater treatment.

Fast and Durable Nanofiber Mat Channel Organic Electrochemical Transistors

Bioelectronic devices that offer real-time measurements, biological signal processing, and continuous monitoring while maintaining stable performance are in high demand. The materials used in organic electrochemical transistors (OECTs) demonstrate high transconductance (GM) and excellent biocompatibility, making them suitable for bioelectronics in a biological environment. However, ion migration in OECTs induces a delayed response time and low cut-off frequency, and the adverse biological environment causes OECT durability problems. Herein, we present OECTs with a faster response time and improved durability, made possible by using a nanofiber mat channel of a conventional OECT structure. Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)/polyacrylamide (PAAm) nanofiber mat channel OECTs are fabricated and subjected to various durability tests for the first time based on continuous measurements and mechanical stability assessments. The results indicate that the nanofiber mat channel OECTs have a faster response time and longer life spans compared to those of film channel OECTs. The improvements can be attributed to the increased surface area and fibrous structure of the nanofiber mat channel. Furthermore, the hydrogel helps to maintain the structure of the nanofiber, facilitates material exchange, and eliminates the need for a crosslinker.

Ethanol Enhances Endothelial Rigidity by Targeting VE-Cadherin-Implications for Acute Aortic Dissection

(1) Background: Acute aortic dissection (AAD) is caused by an endothelial entry tear followed by intimomedial delamination of the outer layers of the vessel wall. The established risk factors include hypertension and smoking. Another rising candidate risk factor is excessive alcohol consumption. This experimental study explores the effects of nicotine (Nic), angiotensin II (Ang II), and ethanol (EtOH) on human aortic endothelial cells (hAoEC). (2) Methods: HAoECs were exposed to Nic, Ang II, and EtOH at different dose levels. Cell migration was studied using the scratch assay and live-cell imaging. The metabolic viability and permeability capacity was investigated using the water-soluble tetrazolium (WST)-1 assay and an in vitro vascular permeability assay. Cell adherence was studied by utilizing the hanging drop assay. The transcriptional and protein level changes were analyzed by RT-qPCR, Western blotting and immunohistochemistry for major junctional complexing proteins. (3) Results: We observed reduced metabolic viability following Ang II and EtOH exposure vs. control. Further, cell adherence was enhanced by EtOH exposure prior to trituration and by all risk factors after trituration, which correlated with the increased gene and protein expression of VE-cadherin upon EtOH exposure. The cell migration capacity was reduced upon EtOH exposure vs. controls. (4) Conclusion: Marked functional changes were observed upon exposure to established and potential risk factors for AAD development in hAoECs. Our findings advocate for an enhanced mechanical rigidity in hAoECs in response to the three substances studied, which in turn might increase endothelial rigidity, suggesting a novel mechanism for developing an endothelial entry tear due to reduced deformability in response to increased shear and pulsatile stress.

Preparation of Mechanically Stable Superamphiphobic Coatings via Combining Phase Separation of Adhesive and Fluorinated SiO2 for Anti-Icing

Superamphiphobic coatings have widespread application potential in various fields, e.g., anti-icing, anti-corrosion and self-cleaning, but are seriously limited by poor mechanical stability. Here, mechanically stable superamphiphobic coatings were fabricated by spraying the suspension composed of phase-separated silicone-modified polyester (SPET) adhesive microspheres with fluorinated silica (FD-POS@SiO₂) on them. The effects of non-solvent and SPET adhesive contents on the superamphiphobicity and mechanical stability of the coatings were studied. Due to the phase separation of SPET and the FD-POS@SiO₂ nanoparticles, the coatings present a multi-scale micro-/nanostructure. Combined with the FD-POS@SiO₂ nanoparticles of low surface energy, the coatings present outstanding static and dynamic superamphiphobicity. Meanwhile, the coatings present outstanding mechanical stability due to the adhesion effect of SPET. In addition, the coatings present outstanding chemical and thermal stability. Moreover, the coatings can obviously delay the water freezing time and decrease the icing adhesion strength. We trust that the superamphiphobic coatings have widespread application potential in the anti-icing field.

The Synergistic Mechanism and Stability Evaluation of Phosphogypsum and Recycled Fine Powder-Based Multi-Source Solid Waste Geopolymer

Geopolymer prepared from solid waste is a high value-added means. However, when used alone, the geopolymer produced by phosphogypsum has the risk of expansion cracking, while the geopolymer of recycled fine powder has high strength and good density, but its volume shrinkage and deformation are large. If the two are combined, the synergistic effect of the phosphogypsum geopolymer and recycled fine powder geopolymer can realize the complementarity of advantages and disadvantages, which provides a possibility for the preparation of stable geopolymers. In this study, the volume stability, water stability and mechanical stability of geopolymers were tested, and the stability synergy mechanism between phosphogypsum, recycled fine powder and slag was analyzed by micro experiments. The results show that the synergistic effect of phosphogypsum, recycled fine powder and slag can not only control the production of ettringite (AFt) but also control the capillary stress in the hydration product, thus improving the volume stability of the geopolymer. The synergistic effect can not only improve the pore structure of the hydration product but also reduce the negative impact of calcium sulfate dihydrate (CaSO₄∙2H₂O), thus improving the water stability of geopolymers. The softening coefficient of P15R45 with a 45 wt.% recycled fine powder content can reach 1.06, which is 26.2% higher than P35R25 with a 25 wt.% recycled fine powder content. The synergistic work reduces the negative impact of delayed AFt and improves the mechanical stability of the geopolymer.

Application of Box-Behnken Design to Optimize Phosphate Adsorption Conditions from Water onto Novel Adsorbent CS-ZL/ZrO/Fe3O4: Characterization, Equilibrium, Isotherm, Kinetic, and Desorption Studies

Phosphate (PO₄^3-) is an essential nutrient in agriculture; however, it is hazardous to the environment if discharged in excess as in wastewater discharge and runoff from agriculture. Moreover, the stability of chitosan under acidic conditions remains a concern. To address these problems, CS-ZL/ZrO/Fe₃O₄ was synthesized using a crosslinking method as a novel adsorbent for the removal of phosphate (PO₄^3-) from water and to increase the stability of chitosan. The response surface methodology (RSM) with a Box-Behnken design (BBD)-based analysis of variance (ANOVA) was implemented. The ANOVA results clearly showed that the adsorption of PO₄^3- onto CS-ZL/ZrO/Fe₃O₄ was significant (p ≤ 0.05), with good mechanical stability. pH, dosage, and time were the three most important factors for the removal of PO₄^3-. Freundlich isotherm and pseudo-second-order kinetic models generated the best equivalents for PO₄^3- adsorption. The presence of coexisting ions for PO₄^3- removal was also studied. The results indicated no significant effect on PO₄^3- removal (p ≤ 0.05). After adsorption, PO₄^3- was easily released by 1 M NaOH, reaching 95.77% and exhibiting a good capability over three cycles. Thus, this concept is effective for increasing the stability of chitosan and is an alternative adsorbent for the removal of PO₄^3- from water.

Super-compressible and mechanically stable reduced graphene oxide aerogel for wearable functional devices

The graphene-based aerogels with good electrical conductivity and compressibility have been reported. However, it is challenging to fabricate the graphene aerogel to have excellent mechanical stability for its application in wearable devices. Thus, inspired by macroscale arch-shaped elastic structures and the importance of crosslinking in microstructural stability, we synthesized the mechanically stable reduced graphene oxide aerogels with small elastic modulus by optimizing the reducing agent to make the aligned wrinkled microstructure in which physical crosslinking is dominant. We used L-ascorbic acid, urea, and hydrazine hydrate as reducing agents to synthesize the graphene aerogels rGO-LAA, rGO-Urea, and rGO-HH, respectively. Hydrazine hydrate was found to be best in enhancing the physical and ionic interaction among graphene nanoflakes to achieve a wavy structure with excellent fatigue resistance. Notably, the optimized rGO-HH aerogel maintained structural stability even after 1000 cycles of compression of 50% strain and decompression, showing 98.7% stress retention and 98.1% height retention. We also studied the piezoresistive properties of the rGO-HH aerogel and showed that the rGO-HH-based pressure sensor exhibited excellent sensitivity (~5.7 kPa-1) with good repeatability. Hence, a super-compressible and mechanically stable piezoresistive material for wearable functional devices was demonstrated by controlling the microstructure and surface chemistry of the reduced graphene oxide aerogel.

Enhanced Mechanical and Hydrophobic Antireflective Nanocoatings Fabricated on Polycarbonate Substrates by Combined Treatment of Water and HMDS Vapor

Polycarbonate (PC) with high transmittance, stable mechanical performance and environmental resistance is crucial for practical applications. In this work, we report a method for the preparation of a robust antireflective (AR) coating by a simple dip-coating process of a mixed ethanol suspension consisting of tetraethoxysilane (TEOS) base-catalyzed silica nanoparticles (SNs) and acid-catalyzed silica sol (ACSS). ACSS greatly improved the adhesion and durability of the coating, and the AR coating exhibited high transmittance and mechanical stability. Water and hexamethyldisilazane (HMDS) vapor treatment were further employed to improve the hydrophobicity of the AR coating. The as-prepared coating exhibited excellent antireflective properties, with an average transmittance of 96.06% in the wavelength range of 400 to 1000 nm, which is 7.55% higher than the bare PC substrate. After sand and water droplet impact tests, the AR coating still maintained enhanced transmittance and hydrophobicity. Our method shows a potential application for the preparation of hydrophobic AR coatings on a PC substrate.

PET/Graphene Nanocomposite Fibers Obtained by Dry-Jet Wet-Spinning for Conductive Textiles

The combination of polyethylene terephthalate (PET), one of the most used polymers in the textile industry, with graphene, one of the most outstanding conductive materials in recent years, represents a promising strategy for the preparation of conductive textiles. This study focuses on the preparation of mechanically stable and conductive polymer textiles and describes the preparation of PET/graphene fibers by the dry-jet wet-spinning method from nanocomposite solutions in trifluoroacetic acid. Nanoindentation results show that the addition of a small amount of graphene (2 wt.%) to the glassy PET fibers produces a significant modulus and hardness enhancement (≈10%) that can be partly attributed to the intrinsic mechanical properties of graphene but also to the promotion of crystallinity. Higher graphene loadings up to 5 wt.% are found to produce additional mechanical improvements up to ≈20% that can be merely attributed to the superior properties of the filler. Moreover, the nanocomposite fibers display an electrical conductivity percolation threshold over 2 wt.% approaching ≈0.2 S/cm for the largest graphene loading. Finally, bending tests on the nanocomposite fibers show that the good electrical conductivity can be preserved under cyclic mechanical loading.

Mechanically Stable Flexible Organic Photovoltaics with Silver Nanomesh for Indoor Applications

Enhanced device performance of flexible organic solar cells (FOSCs) was achieved according to the development of organic solar cells (OSCs). OSCs are promising candidates as energy sources for low-power supply systems such as the Internet of Things (IoT) under indoor lighting environments. To apply FOSCs to flexible or wearable applications, they must be mechanically stable. In this study, we fabricated FOSCs with silver nanomesh (AgNM) as the bottom transparent conductive electrode (TCE). Instead of indium tin oxide (ITO), AgNMs were prepared using three pitches of 25, 50, and 100 μm with a square pattern, using a poly(ethylene terephthalate) (PET) substrate. Notably, the device using AgNMs with a pitch of 25 μm exhibited a power conversion efficiency (PCE) of 14.93% under 1 sun illumination and 17.91% under 1000 lux of light-emitting diode (LED) light conditions. Flexible devices using AgNMs maintained over 92% of their initial PCE under 1 sun illumination (PCE decreased to 12.98 from 14.04%) and over 92% when tested under 1000 lux of LED light illumination (PCE decreased to 16.57 from 17.91%) after 1000 instances of bending. These results demonstrate the advantages of using AgNMs as an alternative TCE under both 1 sun and indoor lightning environments and are promising candidates for flexible applications.

Stability and Strength of Monolayer Polymeric C60

Two-dimensional fullerene networks have been synthesized in several forms, and it is unknown which monolayer form is stable under ambient conditions. Using first-principles calculations, I show that the believed stability of the quasi-tetragonal phases is challenged by mechanical, dynamic, or thermodynamic stability. For all temperatures, the quasi-hexagonal phase is thermodynamically the least stable. However, the relatively high dynamic and mechanical stabilities suggest that the quasi-hexagonal phase is intrinsically stronger than the other phases under various strains. The origin of the high stability and strength of the quasi-hexagonal phase can be attributed to the strong covalent C-C bonds that strongly hold the linked C₆₀ clusters together, enabling the closely packed hexagonal network. These results rationalize the experimental observations that so far only the quasi-hexagonal phase has been exfoliated experimentally as monolayers.

Substrate-binding guides individual melibiose permeases MelB to structurally soften and to destabilize cytoplasmic middle-loop C3

The melibiose permease MelB is a well-studied Na+-coupled transporter of the major facilitator superfamily. However, the symport mechanism of galactosides and cations is still not fully understood, especially at structural levels. Here, we use single-molecule force spectroscopy to investigate substrate-induced structural changes of MelB from Salmonella typhimurium. In the absence of substrate, MelB equally populates two different states, from which one shows higher mechanical structural stability with additional stabilization of the cytoplasmic middle-loop C3. In the presence of either melibiose or a coupling Na+-cation, however, MelB increasingly populates the mechanically less stable state, which shows a destabilized middle-loop C3. In the presence of both substrate and co-substrate, this mechanically less stable state of MelB is predominant. Our findings describe how both substrates guide MelB transporters to populate two different mechanically stabilized states, and contribute mechanistic insights to the alternating-access action for the galactoside/cation symport catalyzed by MelB.

Highly Efficient Flexible Perovskite Solar Cells through Pentylammonium Acetate Modification with Certified Efficiency of 23.35

Among the emerging photovoltaic technologies, rigid perovskite solar cells (PSCs) have made tremendous development owing to their exceptional power conversion efficiency (PCE) of up to 25.7%. However, the record PCE of flexible PSCs (≈22.4%) still lags far behind their rigid counterparts and their mechanical stabilities are also not satisfactory. Herein, through modifying the interface between perovskite and hole transport layer via pentylammonium acetate (PenAAc) molecule a highly efficient and stable flexible inverted PSC is reported. Through synthetic manipulation of anion and cation, it is shown that the PenA⁺ and Ac^- have strong chemical binding with both acceptor and donor defects of surface-terminating ends on perovskite films. The PenAAc-modified flexible PSCs achieve a record PCE of 23.68% (0.08 cm² , certified: 23.35%) with a high open-circuit voltage (V_OC ) of 1.17 V. Large-area devices (1.0 cm² ) also realized an exceptional PCE of 21.52%. Moreover, the fabricated devices show excellent stability under mechanical bending, with PCE remaining above 91% of the original PCE even after 5000 bends.

A tough and mechanically stable adhesive hydrogel for non-invasive wound repair

Wound healing has been a great challenge throughout human history. Improper treatment for wounds is so easy to lead to infection and a series of serious symptoms, even death. Because of the ability of absorbing fluid and keeping a moist environment, the hydrogel with 3D networks is ideal candidate for wound dressing. More important, it has good biocompatibility. However, most of the hydrogel dressings reported have weak mechanical properties and adhesion properties, which greatly limit their clinical application. Herein, a tough adhesive hydrogel with good mechanical stability for non-invasive wound repair is reported. The hydrogel is composed of polyethylene glycol dimethacrylate (PEGDA), chitosan (CS) and chitin nano-whisker (CW). PEGDA and CS form interpenetrating network hydrogel through free radical polymerization reaction under the UV light. The introduction of CW further enhances the toughness of the hydrogel. The pH-sensitive CS can form adhesion to various materials through topological adhesion. As a wound closure repair material, PEGDA/CS/CW hydrogel not only has the characteristic of effectively closing the wound, defending against invading bacteria, and keeping the wound clean, but also has good tensile and mechanical stability, which is expected to realize the closure and repair of joints and other moving parts of the wound. This adhesive hydrogel is proven a promising material for wound closure repair.

Cell-Derived Vesicles with Increased Stability and On-Demand Functionality by Equipping Their Membrane with a Cross-Linkable Copolymer

Cell-derived vesicles retain the cytoplasm and much of the native cell membrane composition. Therefore, they are attractive for investigations of membrane biophysics, drug delivery systems, and complex molecular factories. However, their fragility and aggregation limit their applications. Here, the mechanical properties and stability of giant plasma membrane vesicles (GPMVs) are enhanced by decorating them with a specifically designed diblock copolymer, cholesteryl-poly[2-aminoethyl methacrylate-b-poly(ethylene glycol) methyl ether acrylate]. When cross-linked, this polymer brush enhances the stability of the GPMVs. Furthermore, the pH-responsiveness of the copolymer layer allows for a controlled cargo loading/release, which may enable various bioapplications. Importantly, the cross-linked-copolymer GPMVs are not cytotoxic and preserve in vitro membrane integrity and functionality. This effective strategy to equip the cell-derived vesicles with stimuli-responsive cross-linkable copolymers is expected to open a new route to the stabilization of natural membrane systems and overcome barriers to biomedical applications.

Hemostatic Cryogels Based on Oxidized Pullulan/Dopamine with Potential Use as Wound Dressings

The impetus for research into hydrogels based on selectively oxidized polysaccharides has been stimulated by the diversity of potential biomedical applications. Towards the development of a hemostatic wound dressing in this study, we creatively combined the (hemi)acetal and Schiff base bonds to prepare a series of multifunctional cryogels based on dialdehyde pullulan and dopamine. The designed structures were verified by NMR and FTIR spectroscopy. Network parameters and dynamic sorption studies were correlated with environmental scanning microscopy results, thus confirming the successful integration of the two components and the opportunities for finely tuning the structure-properties balance. The viscoelastic parameters (storage and loss moduli, complex and apparent viscosities, zero shear viscosity, yield stress) and the structural recovery capacity after applying a large deformation were determined and discussed. The mechanical stability and hemostatic activity suggest that the optimal combination of selectively oxidized pullulan and dopamine can be a promising toolkit for wound management.

Robust Underwater Oil-Repellent Biomimetic Ceramic Surfaces: Combining the Stability and Reproducibility of Functional Structures

Robust underwater oil-repellent materials combining high mechanical strength and durability with superwettability and low oil adhesion are needed to build oil-repellent devices able to work in water, to manipulate droplet behavior, etc. However, combining all of these properties within a single, durable material remains a challenge. Herein, we fabricate a robust underwater oil-resistant material (Al₂O₃) with all of the above properties by gel casting. The micro/nanoceramic particles distributed on the surface endow the material with excellent underwater superoleophobicity (∼160°) and low oil adhesion (<4 μN). In addition, the substrate exhibits typical ceramic characteristics such as good antiacid/alkali properties, high salt resistance, and high load tolerance. These excellent properties make the material not only applicable to various liquid environments but also resistant to the impact of particles and other physical damage. More importantly, the substrate could still exhibit underwater superoleophobicity after being worn under specific conditions, as wear will create new surfaces with similar particle size distribution. This approach is easily scalable for mass production, which could open a pathway for the fabrication of practical underwater long-lasting functional interfacial materials.

Zeptoliter DNA Origami Reactor to Reveal Cosolute Effects on Nanoconfined G-Quadruplexes

Cellular environments such as nanoconfinement and molecular crowding can change biomolecular properties. However, in nanoconfinement, it is extremely challenging to investigate effects of crowding cosolutes on macromolecules. By using optical tweezers, here, we elucidated the effects of hexaethylene glycol (HEG) on the mechanical stability of a telomeric G-quadruplex (GQ) in a zeptoliter DNA origami reactor (zepto-reactor). When HEG molecules were introduced in the GQ-containing zepto-reactor at different positions, we found that the GQ species split into two equilibrated populations, reflecting diverse effects of the oligoethylene glycol on the GQ via either a long-range dehydration effect or direct interactions. When the number of HEG molecules was increased, the stability of the GQ unexpectedly decreased, suggesting that the direct destabilizing interaction between the GQ and HEG is dominating over the long-range stabilizing dehydration effects of the HEG in hydrophilic nanocavities. These findings indicate that a nanoconfined environment can alter regular effects of cosolutes on biomacromolecules.

Uniform Silver Nanowire Patterned Electrode on Robust PEN Substrate Using Poly(2-hydroxyethyl methacrylate) Underlayer

Silver nanowire (AgNW) electrodes are among the most essential flexible transparent electrodes (FTEs) emerging as promising alternatives to brittle indium tin oxide (ITO) electrodes. The polymer comprising the plastic substrate to which the AgNWs are applied must also satisfy the mechanical requirements of the final device and withstand the device processing conditions. However, AgNW-based FTEs have some limitations, such as poor adhesion to coated plastic substrates, surface roughness, and difficulty in patterning. This study demonstrates a new strategy for creating AgNW-based patterned flexible poly(ethylene 2,6-naphthalate) (PEN)-based electrodes with appreciable optical and electrical properties. Introducing poly(2-hydroxyethyl methacrylate) on the PEN substrate enhanced the adhesion between the substrate and AgNWs and improved the dispersibility of the AgNWs. Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and a small amount of 2,4-hexadiyne-1,6-diol as a photosensitizer were coated onto the AgNW layer to improve the surface roughness and achieve an effective electrode pattern. By varying the AgNW concentration, we could tune the density and thickness of the AgNWs to optimize the sheet resistance and transmittance. Optimized AgNWs with a sheet resistance of 22.6 Ω/□ and transmittance of 92.3% at 550 nm were achieved. A polymer solar cell (PSC) was fabricated to evaluate the characteristics of the device employing the flexible electrodes. This PSC showed not only a high power conversion efficiency of 11.20%, similar to that of ITO-based devices, but also excellent mechanical stability, which is difficult to achieve in ITO-based flexible devices.

Three-Dimensional Artificial Transpiration Structure Based on 1T/2H-MoS2/Activated Carbon Fiber Cloth for Solar Steam Generation

The rise of solar steam generation is an effective strategy to mitigate clean water shortages. However, achieving further improvements in conversion efficiency and stability remains a challenge. Here, 1T/2H-MoS₂ nanosheets were uniformly assembled on activated carbon fiber cloth (A-CFC) through a facial hydrothermal method, and a three-dimensional (3D)-artificial transpiration device (ATD) was prepared using the plant transpiration process. The combination of activated carbon fiber cloth and 1T/2H phase MoS₂ exhibits high light absorption (∼97.5%), excellent mechanical stability, large evaporation area, and easy escape of vapor. Additionally, the 3D hollow cone of the MoS₂/carbon fiber cloth can effectively reduce radiative and convective energy loss and then achieve the enhancement of energy collection from the environment. An outstanding evaporation rate of 1.61 kg·m^-2·h^-1 with an optimum conversion efficiency of 97% under one sun is reached. Based on the facile fabrication, excellent stability, and high solar conversion efficiency, this nature-inspired design of 3D 1T/2H-MoS₂/A-CFC is expected to facilitate large-scale applications for seawater purification and desalination.

Development of WO3-Nafion Based Membranes for Enabling Higher Water Retention at Low Humidity and Enhancing PEMFC Performance at Intermediate Temperature Operation

The proton exchange membrane (PEM) represents a pivotal material and a key challenge in developing fuel cell science and hydrogen technology. Nafion is the most promising polymer which will lead to its commercialisation. Hybrid membranes of nanosized tungsten oxide (WO₃) and Nafion were fabricated, characterised, and tested in a single cell. The incorporation of 10 wt% WO₃ resulted in 21% higher water uptake, 11.7% lower swelling ratio, almost doubling the hydration degree, and 13% higher mechanical stability of the hybrid membrane compared to the Nafion XL. Compared to commercial Nafion XL, the rNF-WO-10 hybrid membrane showed an 8.8% and 20% increase in current density of the cell at 0.4 V operating at 80 and 95 °C with 1.89 and 2.29 A/cm², respectively. The maximum power density has increased by 9% (0.76 W/cm²) and 19.9% (0.922 W/cm²) when operating at the same temperatures compared to the commercial Nafion XL membrane. Generally, considering the particular structure of Nafion XL, our Nafion-based membrane with 10 wt% WO₃ (rNF-WO-10) is a suitable PEM with a comparable performance at different operating conditions.

Influence of the Polarity of the Plasticizer on the Mechanical Stability of the Filler Network by Simultaneous Mechanical and Dielectric Analysis

Four styrene butadiene rubber (SBR) compounds were prepared to investigate the influence of the plasticizer polarity on the mechanical stability of the filler network using simultaneous mechanical and dielectric analysis. One compound was prepared without plasticizer and serves as a reference. The other three compounds were expanded with different plasticizers that have different polarities. Compared with an SBR sample without plasticizer, the conductivity of mechanically unloaded oil-extended SBR samples decreases by an order of magnitude. The polarity of the plasticizer shows hardly any influence because the plasticizers only affect the distribution of the filler clusters. Under static load, the dielectric properties seem to be oil-dependent. However, this behavior also results from the new distribution of the filler clusters caused by the mechanical damage and supported by the polarity grade of the plasticizer used. The Cole–Cole equation affirms these observations. The Cole–Cole relaxation time τ  and thus, the position of maximal dielectric loss increases as the polarity of the plasticizer used is also increased. This, in turn, decreases the broadness parameter α implying a broader response function.

Managing antibody stability: effects of stressors on Ipilimumab from the commercial formulation to diluted solutions

The stability of the monoclonal antibody Ipilimumab, the active ingredient of Yervoy®, used for the treatment of different types of cancer, has been investigated. Shaking/temperature, light exposure and dilution, protein drug renowned stressors, were applied on a 30-45-day series of experiments to observe the physicochemical and biological behavior of the molecule. Ipilimumab demonstrated stability under shaking and heat up to 45 days, without any unfolding during the induced combined stressors. Under artificial sunlight, the mAb showed to be sensitive even under the minimum dose tested (720 kJ/m²) with formation of aggregates, particularly when diluted in glucose solution. The light-induced soluble aggregates were higher in the case of diluted samples irradiated with much higher light doses (10460 kJ/m²). The aggregation of Ipilimumab took place also by irradiating the non-diluted formulation, indicating that the excipients did not protect completely the drug from photodegradation. Amino acid oxidation and deamidation were found. Anyway, after irradiation with both light doses, soluble Ipilimumab maintained its typical β-sheets structure, and the tertiary structure was nearly maintained compared to the dark. As an additional stressor test, the effect of dilution on the formulation was monitored by using a saline solution (1 mg/mL Ipilimumab) applied during hospital infusion. After two days from dilution, the protein exhibited aggregation and chemical modifications including oxidation and deamidation. When stability conditions were compromised, the viability of human cell lines treated with the stressed formulation slight decreased suggesting low potential biological toxicity of the modified mAb. As this study has demonstrated the susceptibility of Ipilimumab to light, specific solutions, and excipients as well as the use of safe light in manufacturing, handling, and storage of this drug should be promoted. Moreover, the use of proper primary and secondary packaging should be indicated to avoid the detrimental effect of light on the mAb structure and efficacy. A detailed understanding of Ipilimumab physicochemical properties, integrity, and stability could assure the best storage and manipulation conditions for its safe and successful application in cancer therapy.

Transient learning degrees of freedom for introducing function in materials

SignificanceMany protocols used in material design and training have a common theme: they introduce new degrees of freedom, often by relaxing away existing constraints, and then evolve these degrees of freedom based on a rule that leads the material to a desired state at which point these new degrees of freedom are frozen out. By creating a unifying framework for these protocols, we can now understand that some protocols work better than others because the choice of new degrees of freedom matters. For instance, introducing particle sizes as degrees of freedom to the minimization of a jammed particle packing can lead to a highly stable state, whereas particle stiffnesses do not have nearly the same impact.

Applicability of Selected 3D Printing Materials in Electrochemistry

This manuscript investigates the chemical and structural stability of 3D printing materials (3DPMs) frequently used in electrochemistry. Four 3D printing materials were studied: Clear photopolymer, Elastic photopolymer, PET filament, and PLA filament. Their stability, solubility, structural changes, flexibility, hardness, and color changes were investigated after exposure to selected organic solvents and supporting electrolytes. Furthermore, the available potential windows and behavior of redox probes in selected supporting electrolytes were investigated before and after the exposure of the 3D-printed objects to the electrolytes at various working electrodes. Possible electrochemically active interferences with an origin from the 3DPMs were also monitored to provide a comprehensive outline for the use of 3DPMs in electrochemical platform manufacturing.

Full-Dimensional Grain Boundary Stress Release for Flexible Perovskite Indoor Photovoltaics

Perovskite photovoltaics are strong potential candidates to drive low-power off-grid electronics for indoor applications. Compared with rigid devices, flexible perovskite devices can provide a more suitable surface for indoor small electronic devices, enabling them have a broader indoor application prospect. However, the mechanical stability of flexible perovskite photovoltaics is an urgent issue solved. Herein, a kind of 3D crosslinking agent named borax is selected to carry out grain boundary penetration treatment on perovskite film to realize full-dimensional stress release. This strategy improves the mechanical and phase stabilities of perovskite films subjected to external forces or large temperature changes. The fabricated perovskite photovoltaics deliver a champion power conversion efficiency (PCE) of 21.63% under AM 1.5G illumination, which is the highest one to date. The merit of low trap states under weak light makes the devices present a superior indoor PCE of 31.85% under 1062 lux (LED, 2956 K), which is currently the best flexible perovskite indoor photovoltaic device. This work provides a full-dimensional grain boundary stress release strategy for highly stable flexible perovskite indoor photovoltaics.

Semi-Planar Non-Fullerene Molecules Enhance the Durability of Flexible Perovskite Solar Cells

Flexible perovskite solar cells (FPSCs) represent a promising technology in the development of next-generation photovoltaic and optoelectronic devices. SnO2 electron transport layers (ETL) typically undergo significant cracking during the bending process of FPSCs, which can significantly compromise their charge transport properties. Herein, the semi-planar non-fullerene acceptor molecule Y6 (BT-core-based fused-unit dithienothiophen [3,2-b]-pyrrolobenzothiadiazole derivative) is introduced as the buffer layer for SnO2 -based FPSCs. It is found that the Y6 buffer layer can enhance the ability of charge extraction and bending stability for SnO2 ETL. Moreover, the internal stress of perovskite films is also reduced. As a result, SnO2 /Y6-based FPSCs achieved a power conversion efficiency (PCE) of 20.09% and retained over 80% of their initial efficiency after 1000 bending cycles at a curvature radius of 8 mm, while SnO2 -based devices only retain 60% of their initial PCE (18.60%) upon the same bending cycles. In addition, the interfacial charge extraction is also effectively improved in conjunction with reduced defect density upon incorporation of Y6 on the SnO2 ETL, as revealed by femtosecond transient absorption (Fs-TA) measurements.

Enhanced Electrochemical Performance of Zn/VOx Batteries by a Carbon-Encapsulation Strategy

Aqueous zinc ion batteries show tremendous potential in emerging energy storage devices. However, it is challenging to explore the desired cathode materials that match well with the Zn anode. In this work, we report two kinds of carbon-encapsulated VO_x microspheres grown by controlling the calcination temperature. The assembled Zn/VO₂@C-0.5 batteries deliver a high specific capacity and reversible rate performance. They can still maintain 260 mA h g^-1 at 5 A g^-1 after 1000 cycles. In addition, the cells possess an energy density of 280 W h kg^-1 at a power density of 140 W kg^-1. The soft pack devices also show favorable mechanical stability and durable cycle ability. The excellent zinc ion storage capacity can be attributed to the large tunnel structure of VO₂ materials and the high conductivity of amorphous carbon.

Non-Fluorinated Flexible Superhydrophobic Surface with Excellent Mechanical Durability and Self-Cleaning Performance

Although plenty of superhydrophobic surfaces have been developed owing to their tremendous potential applications, it is still a great challenge for the superhydrophobic surfaces to possess environmental friendliness, biocompatibility, and mechanical durability simultaneously. Herein, a non-fluorinated flexible superhydrophobic surface was designed by constructing a film-substrate system with labyrinth-like wrinkles combining an intrinsically hydrophobic Zn film and a polydimethylsiloxane (PDMS) substrate. Excellent superhydrophobicity with a contact angle up to 168.5° and a slide angle as low as 0° has been achieved on the Zn/PDMS surface, which is attributed to the micro-/nano-textured structures of the labyrinth-like wrinkles, providing sufficient air pockets to form a stable Cassie-Baxter state. Furthermore, the Zn/PDMS surface retains excellent superhydrophobicity under stretching, bending, and twisting mechanical deformation up to 500 cycles due to the stability of the micro-/nano-textured structures of the labyrinth-like wrinkles protected by the fantastic self-healing ability of the micro-cracks. Additionally, the Zn/PDMS superhydrophobic surface possesses an outstanding self-cleaning performance for various contaminants. The present work provides a valuable routine to design non-fluorinated flexible superhydrophobic surfaces with superb mechanical durability and self-cleaning property as promising functional layers for flexible electronics, wearable devices, biomedical engineering, and so forth.

Mechanical Analysis and Corrosion Analysis of Zinc Alloys for Bioabsorbable Implants for Osteosynthesis

Zinc alloys have recently been researched intensely for their great properties as bioabsorbable implants for osteosynthesis. Pure zinc (Zn) itself has relatively poor strength, which makes it insufficient for most clinical use. Research has already proven that the mechanical strength of zinc can be enhanced significantly by alloying it with silver. This study evaluated zinc silver alloys (ZnAg) as well as novel zinc silver titanium alloys (ZnAgTi) regarding their mechanical properties for the use as bioabsorbable implants. Compared to pure zinc the mechanical strength was enhanced significantly for all tested zinc alloys. The elastic properties were only enhanced significantly for the zinc silver alloys ZnAg6 and ZnAg9. Regarding target values for orthopedic implants proposed in literature, the best mechanical properties were measured for the ZnAg3Ti1 alloy with an ultimate tensile strength of 262 MPa and an elongation at fracture of 16%. Besides the mechanical properties, the corrosion rates are important for bioabsorbable implants. This study tested the corrosion rates of zinc alloys in PBS solution (phosphate buffered solution) with electrochemical corrosion measurement. Zinc and its alloys showed favorable corrosion rates, especially in comparison to magnesium, which has a much lower degradation rate and no buildup of hydrogen gas pockets during the process. Altogether, this makes zinc alloys highly favorable for use as material for bioabsorbable implants for osteosynthesis.

Nanosurgical Manipulation of Titin and Its M-Complex

Titin is a multifunctional filamentous protein anchored in the M-band, a hexagonally organized supramolecular lattice in the middle of the muscle sarcomere. Functionally, the M-band is a framework that cross-links myosin thick filaments, organizes associated proteins, and maintains sarcomeric symmetry via its structural and putative mechanical properties. Part of the M-band appears at the C-terminal end of isolated titin molecules in the form of a globular head, named here the “M-complex”, which also serves as the point of head-to-head attachment of titin. We used high-resolution atomic force microscopy and nanosurgical manipulation to investigate the topographical and internal structure and local mechanical properties of the M-complex and its associated titin molecules. We find that the M-complex is a stable structure that corresponds to the transverse unit of the M-band organized around the myosin thick filament. M-complexes may be interlinked into an M-complex array that reflects the local structural and mechanical status of the transversal M-band lattice. Local segments of titin and the M-complex could be nanosurgically manipulated to achieve extension and domain unfolding. Long threads could be pulled out of the M-complex, suggesting that it is a compact supramolecular reservoir of extensible filaments. Nanosurgery evoked an unexpected volume increment in the M-complex, which may be related to its function as a mechanical spacer. The M-complex thus displays both elastic and plastic properties which support the idea that the M-band may be involved in mechanical functions within the muscle sarcomere.

Double-Layer Nacre-Inspired Polyimide-Mica Nanocomposite Films with Excellent Mechanical Stability for LEO Environmental Conditions

Owing to their outstanding comprehensive performance, polyimide (PI) composite films are widely used on the external surfaces of spacecraft to protect them from the adverse conditions of low Earth orbit (LEO). However, current PI composite films have inadequate mechanical properties and atomic oxygen (AO) resistance. Herein, this work fabricates a new PI-based nanocomposite film with greatly enhanced mechanical properties and AO resistance by integrating mica nanosheets with PI into a unique double-layer nacre-inspired structure with a much higher density of mica nanosheets in the top layer. In addition, the unique microstructure and the intrinsic properties of mica also impart the nanocomposite film with favorable ultraviolet and high-temperature resistance. The comprehensive performance of this material is superior to those of pure PI, single-layer PI-mica, and previously reported PI-based composite films. Thus, the double-layer nanocomposite film displays great potential as an aerospace material for use in LEO.