Z-Type Ligand Enables Efficient and Stable Deep-Blue Perovskite Light-Emitting Diodes

During the synthesis of deep-blue perovskite quantum dots (PQDs), they generally emerge as a two-dimensional byproduct with poor yield and low photoluminescence quantum yield (PLQY) due to amine ligand enrichment-induced abundant surface defects. Herein, we provide a colloidal synthesis method to prepare deep-blue CsPbBr3 PQDs in a green nontoxic solvent via strategic Z-type ligand engineering. Z-type ligands of zinc octanoate enable the formation of robust coordination bonds with surface bromide ions of PQDs, maintaining acid-base equilibrium and reducing excess amine enrichment on the PQDs surface. Consequently, homogeneous and monodispersed PQDs with improved PLQY of 73% are successfully synthesized, achieving efficient deep-blue LEDs with a peak EQE of 5.46%, a maximum luminance of 847.6 cd/m2, and an operational half-lifetime of 14 min. The devices exhibit color coordinates of (0.137, 0.049), closely approximating the Rec. 2020 blue standard. Our work offers a potentially eco-friendly and viable route for realizing high-performance LEDs in the deep-blue region.

Boosting External Quantum Efficiency of Blue Perovskite QLEDs Exceeding 23% by Trifluoroacetate Passivation and Mixed Hole Transportation Design

Perovskite quantum dot-based light-emitting diodes (QLEDs) have been considered a promising display technology due to their wide color gamut for authentic color expression. Currently, the external quantum efficiency (EQE) for state-of-the-art blue perovskite QLEDs is about 15%, which still lags behind its green and red counterparts (>25%) and blue film-based LEDs. Here, blue perovskite QLEDs that achieve an EQE of 23.5% at 490 nm is presented, to the best knowledge, which is the highest value reported among blue perovskite-based LED fields. This impressive efficiency is achieved through a combination of quantum dot (QD) passivation and optimal device design. First, blue mixed halide perovskite CsPbCl3- xBrx QDs passivated by trifluoroacetate exhibit excellent exciton recombination behavior with a photoluminescence quantum yield of 84% due to reducing uncoordinated Pb surface defects. Furthermore, the device is designed by introducing a mixed hole-transport layer (M-HTL) to increase hole injection and transportation capacity and improve carrier balance. It is further found that M-HTL can decrease carrier leakage and increase radiative recombination in the device, evidenced by the visual electroluminescence spectrum at 2.0 V. The work breaks through the EQE gap of 20% for blue perovskite-based QLEDs and significantly promotes their commercialization process.

Strongly-Confined CsPbBr3 Perovskite Quantum Dots with Ultralow Trap Density and Narrow Size Distribution for Efficient Pure-Blue Light-Emitting Diodes

The development of pure-blue perovskite light-emitting diodes (PeLEDs) faces challenges of spectral stability and low external quantum efficiency (EQE) due to phase separation in mixed halide compositions. Perovskite quantum dots (QDs) with strong confinement effects are promising alternatives to achieve high-quality pure-blue PeLEDs, yet their performance is often hindered by the poor size distribution and high trap density. A strategy combining thermodynamic control with a polishing-driven ligand exchange process to produce high-quality QDs is developed. The strongly-confined pure-blue (≈470 nm) CsPbBr3 QDs exhibit narrow size distribution (12% dispersion) and are achieved in Br-rich ion environment based on growth thermodynamic control. Subsequent polishing-driven ligand exchange process removes imperfect surface sites and replaces initial long-chain organic ligands with short-chain benzene ligands. The resulting QDs exhibit high photoluminescence quantum yield (PLQY) to near-unity. The resulting PeLEDs exhibit a pure-blue electroluminescence (EL) emission at 472 nm with narrow full-width at half-maximum (FWHM) of 25 nm, achieving a maximum EQE of 10.7% and a bright maximum luminance of 7697 cd m-2. The pure-blue PeLEDs show ultrahigh spectral stability under high voltage, a low roll-off of EQE, and an operational half-lifetime (T50) of 127 min at an initial luminance of 103 cd m-2 under continuous operation.

Halogen-Site Regulation in Cs3Bi2X9 Quantum Dots for Efficient and Selective Oxidation of Benzyl Alcohol Driven by Solar Light

Sluggish charge kinetics and low selectivity limit the solar-driven selective organic transformations under mild conditions. Herein, an efficient strategy of halogen-site regulation, based on the precise control of charge transfer and molecule activation by rational design of Cs3Bi2X9 quantum dots photocatalysts, is proposed to achieve both high selectivity and yield of benzyl-alcohol oxidation. In situ PL spectroscopy study reveals that the Bi─Br bonds formed in the form of Br-associated coordination can enhance the separation and transfer of photoexcited carriers during the practical reaction. As the active center, the exclusive Bi─Br covalence can benefit the benzyl-alcohol activation for producing carbon-centered radicals. As a result, the Cs3Bi2Br9 with this atomic coordination achieves a conversion ratio of 97.9% for benzyl alcohol and selectivity of 99.6% for aldehydes, which are 56.9- and 1.54-fold higher than that of Cs3Bi2Cl9. Combined with quasi-in situ EPR, in situ ATR-FTIR spectra, and DFT calculation, the conversion of C6H5-CH2OH to C6H5-CH2* at Br-related coordination is revealed to be a determining step, which can be accelerated via halogen-site regulation for enhancing selectivity and photocatalytic efficiency. The mechanistic insights of this research elucidate how halogen-site regulation in favor of charge transfer and molecule activation toward efficient and selective oxidation of benzyl alcohol.

Synchronously Polishing the Lead-Rich Surface and Passivating Surface Defects of CsPb(Br/I)3 Quantum Dots for High-Performance Pure-Red PeLEDs

Mixed-halide CsPb(Br/I)3 perovskite quantum dots (QDs) are regarded as one of the most promising candidates for pure-red perovskite light-emitting diodes (PeLEDs) due to their precise spectral tuning property. However, the lead-rich surface of these QDs usually results in halide ion migration and nonradiative recombination loss, which remains a great challenge for high-performance PeLEDs. To solve the above issues, we employ a chelating agent of 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid hydrate (DOTA) to polish the lead-rich surface of the QDs and meanwhile introduce a new ligand of 2,3-dimercaptosuccinic acid (DMSA) to passivate surface defects of the QDs. This synchronous post-treatment strategy results in high-quality CsPb(Br/I)3 QDs with suppressed halide ion migration and an improved photoluminescence quantum yield, which enables us to fabricate spectrally stable pure-red PeLEDs with a peak external quantum efficiency of 23.2%, representing one of the best performance pure-red PeLEDs based on mixed-halide CsPb(Br/I)3 QDs reported to date.

Cognitively Driven Autonomous Flow Chemistry for Producing On-Demand Perovskite Quantum Dots Via Advanced Closed-Loop Feedback Control

Recent developments in the synthesis of hybrid organic-inorganic halide perovskite quantum dots (HP-QDs) through compositional adjustments have highlighted their potential applications in the fields of photovoltaics and light sources due to their unique optoelectronic properties. However, traditional methods to fine-tune their composition involve repetitive, labor-intensive, and costly processes. Herein, the utilization of a continuous flow chemistry approach is developed, in combination with a Proportional-Integral (PI) feedback control system as an effective method for producing on-demand methylammonium lead bromoiodide (MAPbBrx I3-x ) HP-QDs. The PI feedback control allows for real-time optimization of the flow rates of halide precursor solutions (halide PSs), enabling the precise tuning of the emission wavelength of HP-QDs. HP-QDs having an emission wavelength of 550 and 650 nm are synthesized through a blue-shifted and red-shifted algorithm, respectively, from any arbitrary reaction condition within 400 s. The iterative process through the PI feedback control produces the target HP-QDs with short rise time and low overshoot. The proposed automatic flow chemistry system integrated with a universal and accessible control algorithm of PI can generate the target HP-QDs with high accuracy, stability, and robustness, demonstrating a significant advancement in constructing an autonomous flow chemistry synthetic system.

Efficient CsPbBr3 Perovskite Light-Emitting Diodes via Novel Multi-Step Ligand Exchange Strategy Based on Zwitterionic Molecules

Perovskite nanocrystals have absorbed increasing interest, especially in the field of optoelectronics, owing to their unique characteristics, including their tunable luminescence range, robust solution processability, facile synthesis, and so on. However, in practice, due to the inherent instability of the traditional long-chain insulating ligands surrounding perovskite quantum dots (PeQDs), the performance of the as-fabricated QLED is relatively disappointing. Herein, the zwitterion 3-(decyldimethylammonio)propanesulfonate (DLPS) with the capability of double passivating perovskite quantum dots could effectively replace the original long-chain ligand simply through a multistep post-treatment strategy to finally inhibit the formation of defects. It was indicated from theexperimental results that the DLPS, as one type of ligand with the bimolecular ion, was very adavntageous in replacing long-chain ligands and further suppressing the formation of defects. Finally, the perovskite quantum dots with greatly enhanced PLQY as high as 98% were effectively achieved. Additionally, the colloidal stability of the corresponding PeQDs has been significantly enhanced, and a transparent colloidal solution was obtained after 45 days under ambient conditions. Finally, the as-fabricated QLEDs based on the ligand-exchanged PeQDs exhibited a maximum brightness of 9464 cd/m2 and an EQE of 12.17%.

Boosting exciton dissociation and charge transfer in CsPbBr3 QDs via ferrocene derivative ligation for CO2 photoreduction

Photo-catalytic CO2 reduction with perovskite quantum dots (QDs) shows potential for solar energy storage, but it encounters challenges due to the intricate multi-electron photoreduction processes and thermodynamic and kinetic obstacles associated with them. This study aimed to improve photo-catalytic performance by addressing surface barriers and utilizing multiple-exciton generation in perovskite QDs. A facile surface engineering method was employed, involving the grafting of ferrocene carboxylic acid (FCA) onto CsPbBr3 (CPB) QDs, to overcome limitations arising from restricted multiple-exciton dissociation and inefficient charge transfer dynamics. Kelvin Probe Force Microscopy and XPS spectral confirmed successfully creating an FCA-modulated microelectric field through the Cs active site, thus facilitating electron transfer, disrupting surface barrier energy, and promoting multi-exciton dissociations. Transient absorption spectroscopy showed enhanced charge transfer and reduced energy barriers, resulting in an impressive CO2-to-CO conversion rate of 132.8 μmol g-1 h-1 with 96.5% selectivity. The CPB-FCA catalyst exhibited four-cycle reusability and 72 h of long-term stability, marking a significant nine-fold improvement compared to pristine CPB (14.4 μmol g-1 h-1). These results provide insights into the influential role of FCA in regulating intramolecular charge transfer, enhancing multi-exciton dissociation, and improving CO2 photoreduction on CPB QDs. Furthermore, these findings offer valuable knowledge for controlling quantum-confined exciton dissociation to enhance CO2 photocatalysis.

Large-scale preparation of CsPbBr3perovskite quantum dot/EVA composite adhesive film by melting for crystal silicon solar cell

Silicon solar cell is the most mature photovoltaic conversion device, and in order to further improve the performance of the device, application of downshifting films has become a research hotspot. In this paper, CsPbBr3perovskite quantum dot/EVA composite adhesive film was prepared by melting method with CsPbBr3perovskite quantum dot film under solution processing as masterbatch and EVA particles as excipient. The effect of synthesis conditions on the luminescence properties of the composite films were thoroughly studied. The optimized CsPbBr3perovskite quantum dot/EVA composite adhesive film has excellent performance, and its light transmission reaches 85%. The CsPbBr3perovskite quantum dot/EVA composite adhesive film absolutely improves the efficiency of silicon solar cells by 1.08%, which is much higher than that of pure EVA adhesive film (0.63%). In addition, the device efficiencies have almost no change after 30 d in the air, maintaining the working stability of the device and contributing to industrial applications. This study provides a novel, industrial and low-cost synthesis route for the synthesis of CsPbBr3perovskite quantum dot/EVA composite adhesive film, which is expected to have broad application.

Effect of polymethyl methacrylate on in situ patterning of perovskite quantum dots by inkjet printing

The preparation of perovskite quantum dots (PQDs) using an in situ inkjet printing method is beneficial for improving the problems of aggregation and photoluminescence (PL) quenching during long-term storage. However, the stability of PQDs prepared using this method is still not ideal, and the morphology of in situ-printed patterns needs to be optimized. To address these problems, this study introduced polymethyl methacrylate (PMMA) into the process of in situ inkjet printing of PQDs and explored the effect of PMMA on the in situ patterning effect of PQDs. The results showed that using a mixed precursor solution containing a small amount of PMMA as the printing ink can slow down the shrinkage process of ink droplets and improve the uniformity of film formation. As the printing substrate, PMMA provided a suitable high-viscosity environment for the in situ growth of PQDs. This could effectively suppress the coffee ring effect. In addition, the interaction between the C=O=C group in PMMA and metal ion Pb2+ in the CsPbBr3 precursor molecules was favourable to enhancing the density of PQDs. The prepared PMMA-coated CsPbBr3 quantum dots (QDs) pattern had high stability and could maintain at 90.08% PL intensity after 1 week of exposure to air.

In situ and General Multidentate Ligand Passivation Achieves Efficient and Ultra-Stable CsPbX3 Perovskite Quantum Dots for White Light-Emitting Diodes

Inorganic CsPbX3 perovskite quantum dots (PeQDs) show great potential in white light-emitting diodes (WLEDs) due to excellent optoelectronic properties, but their practical application is hampered by low photoluminescence quantum yield (PLQY) and especially poor stability. Herein,  we developed an in-situ and general multidentate ligand passivation strategy that allows for CsPbX3 PeQDs not only near-unit PLQY, but significantly improved stability against storage, heat, and polar solvent. The enhanced optical property arises from high effectiveness of the multidentate ligand, diethylenetriaminepentaacetic acid (DTPA) with five carboxyl groups, in passivating uncoordinated Pb2+ defects and suppressing nonradiative recombination. First-principles calculations reveal that the excellent stability is attributed to tridentate binding mode of DTPA that remarkably boosts the adsorption capacity to PeQD core. Finally, combining the green and red PeQDs with blue chip,  we demonstrated highly luminous WLEDs with distinctly enhanced operation stability, a wide color gamut of 121.3% of national television system committee, standard white light of (0.33,0.33) in CIE 1931, and tunable color temperatures from warm to cold white light readily by emitters' ratio. This study provides an operando yet general approach to achieve efficient and stable PeQDs for WLEDs and accelerates their progress to commercialization.

Conversion of Photoluminescence Blinking Types in Single Colloidal Quantum Dots

Almost all colloidal quantum dots (QDs) exhibit undesired photoluminescence (PL) blinking, which poses a significant obstacle to their use in numerous luminescence applications. An in-depth study of the blinking behavior, along with the associated mechanisms, can provide critical opportunities for fabricating high-quality QDs for diverse applications. Here the blinking of a large series of colloidal QDs is investigated with different surface ligands, particle sizes, shell thicknesses, and compositions. It is found that the blinking behavior of single alloyed CdSe/ZnS QDs with a shell thickness of up to 2 nm undergoes an irreversible conversion from Auger-blinking to band-edge carrier blinking (BC-blinking). Contrastingly, single perovskite QDs with particle sizes smaller than their Bohr diameters exhibit reversible conversion between BC-blinking and more pronounced Auger-blinking. Changes in the effective trapping sites under different excitation conditions are found to be responsible for the blinking type conversions. Additionally, changes in shell thickness and particle size of QDs have a significant effect on the blinking type conversions due to altered wavefunction overlap between excitons and effective trapping sites. This study elucidates the discrepancies in the blinking behavior of various QD samples observed in previous reports and provides deeper understanding of the mechanisms underlying diverse types of blinking.

The Combination of Upconversion Nanoparticles and Perovskite Quantum Dots with Temperature-Dependent Emission Colors for Dual-Mode Anti-Counterfeiting Applications

Novel and high-security anti-counterfeiting technology has always been the focus of attention and research. This work proposes a nanocomposite combination of upconversion nanoparticles (UCNPs) and perovskite quantum dots (PeQDs) to achieve color-adjustable dual-mode luminescence anti-counterfeiting. Firstly, a series of NaGdF4: Yb/Tm UCNPs with different sizes were synthesized, and their thermal-enhanced upconversion luminescence performances were investigated. The upconversion luminescence (UCL) intensity of the samples increases with rising temperature, and the UCL thermal enhancement factor rises as the particle size decreases. This intriguing thermal enhancement phenomenon can be attributed to the mitigation of surface luminescence quenching. Furthermore, CsPbBr3 PeQDs were well adhered to the surfaces and surroundings of the UCNPs. Leveraging energy transfer and the contrasting temperature responses of UCNPs and PeQDs, this nanocomposite was utilized as a dual-mode thermochromic anti-counterfeiting system. As the temperature increases, the color of the composite changes from green to pink under 980 nm excitation, while it displays green to non-luminescence under 365 nm excitation. This new anti-counterfeiting material, with its high security and convenience, has great potential in anti-counterfeiting applications.

Small to Large Polaron Behavior Induced by Controlled Interactions in Perovskite Quantum Dot Solids

The polaron is an essential photoexcitation that governs the unique optoelectronic properties of organic-inorganic hybrid halide perovskites, and it has been subject to extensive spectroscopic and theoretical investigation over the past decade. A crucial but underexplored question is how the nature of the photogenerated polarons is impacted by the microscopic perovskite structure and what functional properties this affects. To tackle this question, we chemically tuned the interactions between perovskite quantum dots (QDs) to rationally manipulate the polaron properties. Through a suite of time-resolved spectroscopies, we find that inter-QD interactions open an excited-state channel to form large polaron species, which exhibit enhanced spatial diffusion, slower hot polaron cooling, and a longer intrinsic lifetime. At the same time, polaronic excitons are formed in competition via localized band-edge states, exhibiting strong photoluminescence but are limited by shorter intrinsic lifetimes. This control of polaron type and function through tunable inter-QD interactions not only provides design principles for QD-based materials but also experimentally disentangles polaronic species in hybrid perovskite materials.

Controllable Black-to-Yellow Phase Transition by Tuning the Lattice Symmetry in Perovskite Quantum Dots

The black-to-yellow phase transition in perovskite quantum dots (QDs) is more complex than in bulk perovskites, regarding the role of surface energy. Here, with the assistance of in situ grazing-incidence wide-angle and small-angle X-ray scattering (GIWAXS/GISAXS), distinct phase behaviors of cesium lead iodide (CsPbI3 ) QD films under two different temperature profiles-instant heating-up (IHU) and slow heating-up (SHU) is investigated. The IHU process can cause the phase transition from black phase to yellow phase, while under the SHU process, the majority remains in black phase. Detailed studies and structural refinement analysis reveal that the phase transition is triggered by the removal of surface ligands, which switches the energy landscape. The lattice symmetry determines the transition rate and the coexistence black-to-yellow phase ratio. The SHU process allows longer relaxation time for a more ordered QD packing, which helps sustain the lattice symmetry and stabilizes the black phase. Therefore, one can use the lattice symmetry as a general index to monitor the CsPbI3 QD phase transition and finetune the coexistence black-to-yellow phase ratio for niche applications.

A Novel Strategy for the Synthesis of High Stability of Luminescent Zero Dimensional-Two Dimensional CsPbBr3 Quantum Dot/1,4-bis(4-methylstyryl)benzene Nanoplate Heterostructures at an Atmospheric Condition

Perovskite quantum dots (QDs), emerging with excellent bright-green photoluminescence (PL) and a large absorption coefficient, are of great potential for the fabrication of light sources in underwater optical wireless communication systems. However, the instability caused by low formation energy and abundant surface traps is still a major concern for perovskite-based light sources in underwater conditions. Herein, we propose ultra-stable zero dimensional-two dimensional (0D-2D) CsPbBr3 QD/1,4-bis(4-methylstyryl)benzene (p-MSB) nanoplate (NP) heterostructures synthesized via a facile approach at room temperature in air. CsPbBr3 QDs can naturally nucleate on the p-MSB NP toluene solution, and the radiative combination is drastically intensified owing to the electron transfer within the typical type-II heterostructures, leading to a sharply increased PLQY of the heterostructure thin films up to 200% compared with the pristine sample. The passivation of defects within CsPbBr3 QDs can be effectively realized with the existence of p-MSB NPs, and thus the obviously improved PL is steadily witnessed in an ambient atmosphere and thermal environment. Meanwhile, the enhanced humidity stability and a peak EQE of 9.67% suggests a synergetic strategy for concurrently addressing the knotty problems on unsatisfied luminous efficiency and stability of perovskites for high-performance green-emitting optoelectronic devices in underwater applications.

Transmission Electron Microscopy Peeled Surface Defect of Perovskite Quantum Dots to Improve Crystal Structure

Transmission electron microscopy (TEM) is an excellent characterization method to analyze the size, morphology, crystalline state, and microstructure of perovskite quantum dots (PeQDs). Nevertheless, the electron beam of TEM as an illumination source provides high energy, which causes morphological variation (fusion and melting) and recession of the crystalline structure in low radiolysis tolerance specimens. Hence, a novel and facile strategy is proposed: electron beam peel [PbBr6]4- octahedron defects from the surface of QDs to optimize the crystal structure. TEM and high-angle annular dark-field scanning TEM (HAADF) tests indicate that the [PbBr6]4- octahedron would be peeled from the surface of QDs when QDs samples were irradiated under high-power irradiation, and then a clear image would be obtained. To avoid interference from a protective film of "carbon deposits" on the surface of the sample when using high resolution TEM, amorphous carbon film (15-20 nm) was deposited on the surface of QDs film and then characterized by TEM and HAADF. The detection consequences showed that the defection of PbBr2 on the surface of QDs will gradually disappear with the extension of radiation time, which further verifies the conjecture.

Application of a Perovskite NIR-LED with Highly Stable FAPbI3@SiO2 Core-Shell Nanocomposites in a SPR Sensing Platform

In recent years, the demand for detection and diagnostic methods has consistently risen due to the aging of the population and the increase in the number of patients with chronic diseases. Label-free biomedical detection techniques have emerged as indispensable instruments for diagnosing a variety of diseases. The development of label-free and highly sensitive near-infrared (NIR) biomedical detection technology has attracted considerable attention. As a label-free, swift, and cost-effective analytical technique, it has demonstrated immense potential for a wide range of applications. We successfully assembled FAPbI3 near-infrared perovskite quantum dots (NIPQDs) into SiO2 shells using a rapid room-temperature atmospheric synthesis method, obtaining monodisperse FAPbI3@SiO2 nanocomposites (NCs) with a high photoluminescence quantum yield (PLQY) of 72%. Additionally, the incorporation of hydrophobic multi-branched trioctylphosphine oxide effectively passivated the surface defects of FAPbI3 NIPQDs and suppressed the hydrolysis rate of tetraethoxysilane, enabling the formation of a highly stable and high PLQY nanoscale-particle level within the FAPbI3@SiO2 core-shell structure. Notably, we successfully incorporated FAPbI3@SiO2 core-shell NCs onto InGaN blue chip as NIR excitation light sources for surface plasmon resonance sensing platforms, providing a novel platform for bioanalytical detection. With a detection sensitivity of 6302.5 nm/RIU, the system demonstrated high sensitivity, stability, and dependability. This achievement expands the biomedical research field's capacity for diagnosis, monitoring, and treatment.

Nanostructure Control of GaN by Electrochemical Etching for Enhanced Perovskite Quantum Dot LED Backlighting

Upgraded technology has realized miniaturization and promoted transformation in each field. Miniaturized light-emitting diode (LED) chips enable higher resolution and create a full sense of immersion in displays. Porous GaN is a structure that can reduce excitation light leakage and enhance the light conversion efficiency. Perovskite quantum dots with the highest optical density as candidate materials for loading in pores can significantly decrease the aggregation phenomenon and increase the path of light absorption. Here, the porous tunability is explored by electrochemical etching under a range of voltages, concentrations, and etching times with acid and base electrolytes, such as oxalic acid and potassium hydroxide. Based on scanning electron microscopy images, the distribution of the pores and the morphology of pore channels can be distinguished under acid and base etching. Larger pore sizes and distorted channels (∼680 nm) are presented on the oxalic acid-etched GaN chip. In contrast, smaller pore sizes and straight-deeper channels (∼5650 nm) are demonstrated on the GaN by potassium hydroxide etching. Therefore, the hybrid nanostructure is etched by oxalic acid and potassium hydroxide, separately. The green and red light conversion efficiencies of perovskite quantum dots pumped by a blue LED can be improved by 3 and 10 times, respectively, resulting in a color gamut of approximately 124%.

Multifunctional Short-Chain 2-Thiophenealkylammonium Bromide Ligand-Assisted Perovskite Quantum Dots for Efficient Light-Emitting Diodes

Lead halide perovskite quantum dots (QDs) have attracted great interest for application in light-emitting diodes (LEDs) due to their high photoluminescence quantum yield (PLQY), solution processability, and high color purity, showing great potential for next-generation full-color display and lighting technologies. Conventional long-chain insulating oleic acid (OA)/oleamine (OAm) ligands exhibit dynamic binding to the surface of QDs, resulting in a plethora of extra surface defects and inferior optoelectronic properties. Herein, a sole multifunctional ligand with optimized carbon chain length, that is, 2-thiophenepropylamine bromide (ThPABr), was creatively designed and introduced into CsPbBr3 QDs, which not only replaces OAm and provides a bromine source but also coordinates with the uncoordinated surface Pb2+ of QDs through the thiophene, passivating surface defects and increasing the PLQY of the film to 83%. More importantly, the interaction between the electron donor-thiophene ring and QDs can enhance electron injection and improve carrier balance. The resulting green LED exhibited significant performance improvement, showing ultrahigh spectral stability under high operating voltage, achieving a maximum external quantum efficiency of 10.5%, and extending the operating lifetime to 5-fold that of the reference. Designing a single multifunctional ligand presents a promising and convenient strategy for selecting surface ligands that can enhance the performance of LEDs or other optoelectronic devices.

Interface-Induced Crystallinity Enhancement of Perovskite Quantum Dots for Highly Efficient Light-Emitting Diodes

Perovskite quantum dot light-emitting diodes (QLEDs) with high color purity and wide color gamut have good application prospects in the next generation of display technology. However, colloidal perovskite quantum dots (PQDs) may introduce a large number of defects during the film-forming process, which is not conducive to the luminous efficiency of the device. Meanwhile, the disordered film formation of PQDs will form interfacial defects and reduce the device performance. Here, we report an interface-induced crystallinity enhancement (IICE) strategy to increase the crystallinity of PQDs at the hole transport layer (HTL)/PQD interface. As a result, both the Br- vacancies in the PQD film and the interfacial defects were well passivated and the leakage current was also suppressed. We achieved QLEDs with a maximum external quantum efficiency (EQE) of 16.45% and current efficiency (CE) of 61.77 cd/A, showing improved performance to more than twice that of the control devices. The IICE strategy paves a new way to enhance the crystallinity of PQD films, so as to improve the performance of QLEDs for application in the future display field.

Improvement of the Stability and Optical Properties of CsPbBr3 QDs

All-inorganic perovskite quantum dots (CsPbX3 QDs) (X = Cl, Br, I) have the advantages of adjustable emission position, narrow emission spectrum, high fluorescence quantum efficiency (PLQY), easy preparation, and elevated defect tolerance; therefore, they are widely used in optoelectronic devices, such as solar cells, light-emitting diodes, and lasers. However, their stability still constrains their development due to their intrinsic crystal structure, ionic exchange of surface ligands, and exceptional sensitivity to environmental factors, such as light, water, oxygen, and heat. Therefore, in this paper, we investigate the stability improvement of CsPbX3 QDs and apply fabricated high-efficiency, stable perovskite QDs to solar cells to improve the performance of the cells further. In this paper, we focus on CsPbBr3 QDs with intrinsic extreme stability and optimize CsPbBr3 QDs using strategies, such as Mn+ doping, ligand regulation, and polymer encapsulation, which can improve optical properties while ensuring their stability. The test results show that the above five methods can improve the strength and luminescence performance of QDs, with the best stability achieved when PMMA encapsulates QDs with a ratio of PMMA = 2:1 and PLQY increases from 60.2% to 90.1%.

High-Resolution Patterning of Perovskite Quantum Dots via Femtosecond Laser-Induced Forward Transfer

High-resolution patterning of perovskite quantum dots (PQDs) is of significant importance for satisfying various practical applications, including high-resolution displays and image sensing. However, due to the limitation of the instability of PQDs, the existing patterning strategy always involves chemical reagent treatment or mask contact that is not suitable for PQDs. Therefore, it is still a challenge to fabricate high-resolution full-color PQD arrays. Here, we present a femtosecond laser-induced forward transfer (FsLIFT) technology, which enables the programmable fabrication of high-resolution full-color PQD arrays and arbitrary micropatterns. The FsLIFT process integrates transfer, deposition, patterning, and alignment in one step without involving a mask and chemical reagent treatment, guaranteeing the preservation of the photophysical properties of PQDs. A full-color PQD array with a high resolution of 2 μm has been successfully achieved. We anticipate that our facile and flexible FsLIFT technology can facilitate the development of diverse practical applications based on patterned PQDs.

Intelligent Colorimetric Indicators for Quality Monitoring and Multilevel Anticounterfeiting with Kinetics-Tunable Fluorescence

The spoilage and forgery of perishable products such as food, drugs, and vaccines cause serious health hazards and economic loss every year. Developing highly efficient and convenient time-temperature indicators (TTIs) to realize quality monitoring and anticounterfeiting simultaneously is urgent but remains a challenge. To this end, a kind of colorimetric fluorescent TTI, based on CsPbBr₃@SiO₂ nanoparticles with tunable quenching kinetics, is developed. The kinetics rate of the CsPbBr₃-based TTIs is easily regulated by adjusting temperature, concentration of the nanoparticles, and addition of salts, stemming from the cation exchange effect, common-ion effect, and structural damage by water. Typically, when combined with europium complexes, the developed TTIs show an irreversible dynamic change in fluorescent colors from green to red upon increasing temperature and time. Furthermore, a locking encryption system with multiple logics is also realized by combining TTIs with different kinetics. The correct information only appears at specific ranges of time and temperature under UV light and is irreversibly self-erased afterward. The simple and low-cost composition and the ingenious design of kinetics-tunable fluorescence in this work stimulate more insights and inspiration toward intelligent TTIs, especially for high-security anticounterfeiting and quality monitoring, which is really conducive to ensuring food and medicine safety.

Patterning Perovskite Quantum Dots Using Photopolymerization

All-inorganic cesium lead halide perovskite quantum dots (QDs) have several potential applications, owing to their unique optical and electronic properties. However, patterning perovskite QDs using conventional methods is difficult because of the ionic nature of QDs. Here, we demonstrate a unique approach, in which perovskite QDs are patterned in polymer films through the photocuring of monomers under patterned light illumination. The pattern illumination creates the transient polymer concentration difference, which drives the QDs to form patterns; hence controlling polymerization kinetics is essential for the generation of the QD pattern. For the patterning mechanism, a light projection system equipped with a digital micromirror device (DMD) is developed; thus, light intensity, an important factor to determine polymerization kinetics, is precisely controlled per position on the photocurable solution, resulting in the understanding of the mechanism and the formation of distinct QD patterns. The demonstrated approach assisted by the DMD-equipped projection system can form desired perovskite QD patterns solely by patterned light illumination, paving the way for the development of patterning methods for perovskite QDs and other nanocrystals.

In situgrowth strategy to construct perovskite quantum dot@covalent organic framework composites with enhanced water stability

Metal halide perovskite quantum dots (QDs) have excellent optoelectronic properties; however, their poor stability under water or thermal conditions remains an obstacle to commercialization. Here, we used a carboxyl functional group (-COOH) to enhance the ability of a covalent organic framework (COF) to adsorb lead ions and grow CH₃NH₃PbBr₃(MAPbBr₃) QDsin situinto a mesoporous carboxyl-functionalized COF to construct MAPbBr₃QDs@COF core-shell-like composites to improve the stability of perovskites. Owing to the protection of the COF, the as-prepared composites exhibited enhanced water stability, and the characteristic fluorescence was maintained for more than 15 d. These MAPbBr₃QDs@COF composites can be used to fabricate white light-emitting diodes with a color comparable to natural white emission. This work demonstrates the importance of functional groups for thein situgrowth of perovskite QDs, and coating with a porous structure is an effective way to improve the stability of metal halide perovskites.

Zero Dimensional-Two Dimensional Hybrid Photodetectors Using Multilayer MoS2 and Lead Halide Perovskite Quantum Dots with a Tunable Bandgap

We report high-performance 0D-2D hybrid photodetectors integrated with tunable band gap perovskite (CsPbI₃, Cs_XFA_X-1PbI₃, and FAPbI₃) quantum dots and MOCVD-grown bilayer MoS₂. In our hybrid structure, the lead halide PQDs can be utilized as an absorbing layer of light of specific wavelengths and transfer the photogenerated carriers to the MoS₂ transport layer. With tunable wavelength lead halide PQDs, the 0D-2D hybrid photodetector shows a high responsivity up to 10⁷ AW^-1 and high specific detectivity exceeding 10¹³ Jones due to the difference in the built-in potential between PQDs and multilayer MoS₂ layers. This work proposes the possibility of fabricating high-performance photodetectors by hybridizing PQDs of various band gaps with 2D materials.

Rubidium ions doping to improve the photoluminescence properties of Mn doped CsPbCl3perovskite quantum dots

All-inorganic cesium lead halide CsPbX₃(X = Cl, Br, I) perovskite quantum dots (PQDs) have shown promising potential in current Mini/Micro-LED display applications due to their excellent photoluminescence performance. However, lead ions in PQDs are easily to leak owing to the unstable structure of PQDs, which hinders their commercial applications. Herein, we adopt Rb⁺ions co-doping strategy to regulate the doping characteristics of Mn²⁺ions in CsPbCl₃PQDs. The synthesized CsPbCl₃:(Rb⁺, Mn²⁺) PQDs possess enhanced photoluminescence quantum yield of 71.1% due to the reduction of intrinsic defect states and Mn-Mn or Mn-traps in co-doped PQDs. Moreover, the white light emission of CsPb(Cl/Br)₃:(Rb⁺, Mn²⁺) PQDs is achieved by anion exchange reaction and the constructed WLED exhibits the CIE coordinate of (0.33, 0.29) and the correlated color temperature of 5497 K. Benefiting from the substitution strategy, these doped CsPbX₃PQDs can be widely used as fluorescence conversion materials for the construction of Mini/Micro-LED.

Fully Photoswitchable Phototransistor Memory Comprising Perovskite Quantum Dot-Based Hybrid Nanocomposites as a Photoresponsive Floating Gate

Tremendous research efforts have been dedicated into the field of photoresponsive nonvolatile memory devices owing to their advantages of fast transmitting speed, low latency, and power-saving property that are suitable for replacing current electrical-driven electronics. However, the reported memory devices still rely on the assistance of gate bias to program them, and a real fully photoswitchable transistor memory is still rare. Herein, we report a phototransistor memory device comprising polymer/perovskite quantum dot (QD) hybrid nanocomposites as a photoresponsive floating gate. The perovskite QDs offer an effective discreteness with an excellent photoresponse that are suitable for photogate application. In addition, a series of ultraviolet (UV)-sensitive insulating polymer hosts were designed to investigate the effect of UV light on the memory behavior. We found that a fully photoswitchable memory device was fulfilled by using the independent and sequential photoexcitation between a UV-sensitive polymer host and a visible light-sensitive QD photogates, which produced decent photoresponse, memory switchability, and highly stable memory retention with a memory ratio of 10⁴ over 10⁴ s. This study not only unraveled the mystery in the fully photoswitchable functionality of nonvolatile memory but also enlightened their potential in the next-generation electronics for light-fidelity application.

High-Reliability Perovskite Quantum Dots Using Atomic Layer Deposition Passivation for Novel Photonic Applications

In this study, we propose highly stable perovskite quantum dots (PQDs) coated with Al₂O₃ using atomic layer deposition (ALD) passivation technology. This passivation layer effectively protects the QDs from moisture infiltration and oxidation as well as from high temperatures and any changes in the material characteristics. They exhibit excellent wavelength stability and reliability in terms of current variation tests, long-term light aging tests, and temperature/humidity tests (60°/90%). A white-light system has been fabricated by integrating a micro-LED and red phosphor exhibiting a high data transmission rate of 1 Gbit/s. These results suggest that PeQDs treated with ALD passivation protection offer promising prospects in full-color micro-displays and high-speed visible-light communication (VLC) applications.

Multiple Interpenetrating Metal-Organic Frameworks with Channel-Size-Dependent Behavior for Selective Gossypol Detection and Perovskite Quantum Dot Encapsulation

An interpenetrating structure endows metal-organic frameworks (MOFs) with many exciting applications, such as fluorescence detection and host-guest chemistry. Herein, two unique structure-interpenetrating In-MOFs (In-pdda-1 and In-pdda-2; H2pdda = 4,4'-(pyridine-2,5-diyl)dibenzoic acid) are constructed by different coordination configurations. The four-connected In3+ center shows a triangular-pyramidal configuration or a 2D rectangle, forming an unc topology for In-pdda-1 and a sql network for In-pdda-2, respectively. Two different interpenetrating modes created by linear rigid ligands and metal clusters are observed in the two MOFs (In-pdda-1, 8-fold interpenetrating mode; In-pdda-2, [2D + 2D] interpenetrating mode), which determine the channel-size-dependent properties in fluorescence applications. During the quantitative detection process of gossypol, the small rhombic channels divided by interpenetrating molecular planes of In-pdda-2 greatly limit the distance between the analyte and the probe, promoting electron transfer and energy transfer processes and thus resulting in a low detection limit (28.6 nM). In addition, the pore size effect of In-pdda-1 encouraged us to explore an in situ perovskite quantum dot encapsulation strategy to obtain a MAPbBr3@MOF material with tunable and stable luminescence properties. Both of the above channel-size-dependent fluorescence properties may provide inspiration for the structural design and specialized applications of MOF materials.

Encapsulation of Dual-Passivated Perovskite Quantum Dots for Bio-Imaging

Due to their marvelous electrical and optical properties, perovskite nanocrystals have reached remarkable landmarks in solar cells, light-emitting diodes, and photodetectors. However, the intrinsic instability of ionic perovskites, which would undergo an undesirable phase transition and decompose rapidly in ambient humidity, limits their long-term practical deployment. To address this challenge, halogenated trimethoxysilane as the passivation additive is chosen, which utilizes simultaneous halide and silica passivation to enhance the stability of perovskite nanoparticles via a dual-passivation mechanism. The processable nanoparticles show high photoluminescence quantum yield, tunable fluorescence wavelength, and excellent resistance against air and water, highlighting great potential as green to deep-red bio-labels after further phospholipid encapsulation. This work demonstrates that the dual-passivation mechanism could be used to maintain the long-term stability of ionic crystals, which sheds light on the opportunity of halide perovskite nanoparticles for usage in a humid environment.

Highly Orientated Perovskite Quantum Dot Solids for Efficient Solar Cells

Perovskite quantum dots (PQDs) have emerged as competitive optoelectronic materials for photovoltaic applications due to their ideal bandgap energy, high defect tolerance, and solution processability. However, the highly dynamic surface and imperfect cubic structure of PQDs generally result in unfavorable charge-carrier transport within the PQD solids and serious nonradiative recombination. Herein, a highly orientated PQD solid is demonstrated using precursor engineering accompanied by a chemical stripping treatment (CST). A combination of systematic experimental studies and theoretical calculations is conducted to fundamentally understand the resurfacing of PQDs using the CST approach. The results reveal that the highly ordered PQDs can result in a high orientation of PQD solids, significantly promoting charge-carrier transport within the PQD solids. Meanwhile, the ideal cubic-structured PQD with an iodine-rich surface dramatically decreases surface trap states, thereby substantially diminishing trap-assisted nonradiative recombination. Consequently, the inorganic PQD solar cell delivers a power conversion efficiency of up to 16.25%. This work provides a feasible avenue to construct highly orientated PQD solids with improved photophysical properties for high-performance optoelectronic devices.

85 °C/85%-Stable n-i-p Perovskite Photovoltaics with NiOx Hole Transport Layers Promoted By Perovskite Quantum Dots

Power conversion efficiency (PCE) and long-term stability are two vital issues for perovskite solar cells (PSCs). However, there is still a lack of suitable hole transport layers (HTLs) to endow PSCs with both high efficiency and stability. Here, NiO_x nanoparticles are promoted as an efficient and 85 °C/85%-stable inorganic HTL for high-performance n-i-p PSCs, with the introduction of perovskite quantum dots (QDs) between perovskite and NiO_x as systematic interfacial engineering. The QD intercalation enhances film morphology and assembly regulation of NiO_x HTLs . Due to structure-function correlations, hole mobility within NiO_x HTL is improved. And the hole extraction from perovskite to NiO_x is also facilitated, resulting from reduced trap states and optimized energy level alignments. Hence, the promoted NiO_x -based n-i-p PSCs exhibit high PCE (21.59%) and excellent stability (sustaining 85 °C aging in air without encapsulation). Furthermore, encapsulated solar modules with QDs-promoted NiO_x HTLs show impressive stability during 85 °C/85% aging test for 1000 hours. With high transparency, QDs-promoted NiO_x is also demonstrated to be an advanced HTL for semitransparent PSCs. This work develops promising NiO_x inorganic HTL in n-i-p PSCs for manufacturing next-generation photovoltaic devices.

Coupling Perovskite Quantum Dot Pairs in Solution using a Nanoplasmonic Assembly

Perovskite quantum dots (PQDs) provide a robust solution-based approach to efficient solar cells, bright light emitting devices, and quantum sources of light. Quantifying heterogeneity and understanding coupling between dots is critical for these applications. We use double-nanohole optical trapping to size individual dots and correlate to emission energy shifts from quantum confinement. We were able to assemble a second dot in the trap, which allows us to observe the coupling between dots. We observe a systematic red-shift of 1.1 ± 0.6 meV in the emission wavelength. Theoretical analysis shows that the observed shift is consistent with resonant energy transfer and is unusually large due to moderate-to-large quantum confinement in PQDs. This demonstrates the promise of PQDs for entanglement in quantum information applications. This work enables future in situ control of PQD growth as well as studies of the coupling between small PQD assemblies with quantum information applications in mind.

Room-Temperature, Highly Pure Single-Photon Sources from All-Inorganic Lead Halide Perovskite Quantum Dots

Attaining pure single-photon emission is key for many quantum technologies, from optical quantum computing to quantum key distribution and quantum imaging. The past 20 years have seen the development of several solid-state quantum emitters, but most of them require highly sophisticated techniques (e.g., ultrahigh vacuum growth methods and cryostats for low-temperature operation). The system complexity may be significantly reduced by employing quantum emitters capable of working at room temperature. Here, we present a systematic study across ∼170 photostable single CsPbX3 (X: Br and I) colloidal quantum dots (QDs) of different sizes and compositions, unveiling that increasing quantum confinement is an effective strategy for maximizing single-photon purity due to the suppressed biexciton quantum yield. Leveraging the latter, we achieve 98% single-photon purity (g(2)(0) as low as 2%) from a cavity-free, nonresonantly excited single 6.6 nm CsPbI3 QDs, showcasing the great potential of CsPbX3 QDs as room-temperature highly pure single-photon sources for quantum technologies.

Efficient Radiative Enhancement in Perovskite Light-Emitting Devices through Involving a Novel Sandwich Localized Surface Plasmon Structure

In recent years, CsPbX₃ (X = Cl, Br, I) perovskite quantum dots (QDs) have been considered as the most promising materials for light-emitting diodes (LEDs). However, the advances of CsPbX₃ quantum dot-based light emitting diodes (QLEDs) still lagged behind inorganic III-V LEDs and other organic LEDs. Herein, a strategy to improve the performances of perovskite QLEDs is reported by utilizing the localized surface plasmon resonance (LSPR) effects of Au nanospheres (NSs). It is accomplished by introducing a Au NS layer into the electron transport layer of Ca²⁺ -CsPbBr₃ QLEDs, where the diameter and spacing of Au NSs and the interaction distance between the Ca²⁺ -CsPbBr₃ QD and Au NS layers are modulated, according to the theoretical simulation of Finite-difference time-domain. As a result, the photoluminescence quantum yield of Ca²⁺ -CsPbBr₃ QD layer is improved from 31.5% to 73.3%. Finally, the luminance of Ca²⁺ -CsPbBr₃ QLEDs is improved from 16824 to 63931 cd m^-2 and external quantum efficiency (EQE) is improved from 4.2% to 10.5%. The radiative transition rate can be remarkably modulated from 0.7 × 10⁷ to 6.6 × 10⁷ s^-1 . The enhancement in luminance and EQE are the best values in the LSPR modified perovskite QLEDs and the strategy offered in this work fits with other LEDs and optoelectrical devices.

Spectrum Reconstruction with Filter-Free Photodetectors Based on Graded-Band-Gap Perovskite Quantum Dot Heterojunctions

Spectrum reconstruction with filter-free microspectrometers has attracted much attention owing to their promising potential in in situ analysis systems, on-chip spectroscopy characterizations, hyperspectral imaging, etc. Further efforts in this field can be devoted to improving the performance of microspectrometers by employing high-performance photosensitive materials and optimizing the reconstruction algorithms. In this work, we demonstrate spectrum reconstruction with a set of photodetectors based on graded-band-gap perovskite quantum dot (PQD) heterojunctions using both calculation and machine learning algorithms. The photodetectors exhibit good photosensitivities with nonlinear current-voltage curves, and the devices with different PQD band gaps show various spectral responsivities with different cutoff wavelength edges covering the entire visible range. Reconstruction performances of monochromatic spectra with the set of PQD photodetectors using two different algorithms are compared, and the machine learning method achieves relatively better accuracy. Moreover, the nonlinear current-voltage variation of the photodetectors can provide increased data diversity without redundancy, thus further improving the accuracy of the reconstructed spectra for the machine learning algorithm. A spectral resolution of 10 nm and reconstruction of multipeak spectra are also demonstrated with the filter-free photodetectors. Therefore, this study provides PQD photodetectors with the corresponding optimized algorithms for emerging flexible microspectrometer systems.

Perovskite Quantum Dots in Solar Cells

Perovskite quantum dots (PQDs) have captured a host of researchers' attention due to their unique properties, which have been introduced to lots of optoelectronics areas, such as light-emitting diodes, lasers, photodetectors, and solar cells. Herein, the authors aim at reviewing the achievements of PQDs applied to solar cells in recent years. The engineering concerning surface ligands, additives, and hybrid composition for PQDSCs is outlined first, followed by analyzing the reasons of undesired performance of PQDSCs. Subsequently, a novel overview that PQDs are utilized to improve the photovoltaic performance of various kinds of solar cells, is provided. Finally, this review is summarized and some challenges and perspectives concerning PQDs are also discussed.

Photoelectric Logic and In Situ Memory Transistors with Stepped Floating Gates of Perovskite Quantum Dots

Electronic-Photonic integrated systems have attracted intensive attention in addressing the explosively increasing data-processing issue in the post-Moore era. However, the tremendous size difference between basic electronic and photonic units poses challenges for the further deep convergence of optoelectronic microprocessors. Here, we report a floating-gate transistor fabricated with complementary metal-oxide-semiconductor compatible technologies, which can realize multilevel photoelectric logic computing and in situ memory simultaneously. The transistor presents stepped floating gates of perovskite quantum dots with different bandgaps and exhibits nonvolatile multilevel memory states written/erased by electrical and high-bandwidth optical signals. Meanwhile, the device can also realize logic functions such as an optoelectronic AND gate by separably programming the states of the stepped floating gates with bias and optical wavelength. A convergence of multilevel logic computing and storage is further achieved on the transistor. By demonstrating such multifunctionality in a single device, the photoelectric transistors, even with a rather large size to match photonic cells, can provide the optoelectronic microprocessors with substantially improved performances.

Ionic Liquids Modulating CsPbI3 Colloidal Quantum Dots Enable Improved Mobility for High-Performance Solar Cells

Colloidal all-inorganic CsPbI₃ perovskite quantum dots (PQDs) have shown tremendous potential in photovoltaic applications in recent years due to their outstanding optoelectronic properties that general metal halide perovskites offer, along with the added advantages that originates from size reduction and the quantum confinement effect. However, the issue of low carrier mobility in PQD films caused by insulating organic ligands capped on the PQD surface still remains to be addressed while aiming for high-efficiency PQD solar cells. Herein, we propose a novel strategy that takes benefits of ionic liquids, which can offer the high polarity and the electron donating ability to boost the mobility of PQD films in photovoltaic devices. Specifically, 1-propyl-3-methylimidazolium iodide to modulate the colloidal CsPbI₃ PQD surface and couple QDs is demonstrated for the first time. The lone pair electrons on the nitrogen of the imidazole ring within the ionic liquid binds to the empty nonbonding surface orbitals of CsPbI₃ PQDs while the long-chain insulating ligands are replaced, which enables not only efficient charge transport but also reduced defect density in the assembled PQD solid films. The resulting CsPbI₃ PQD solar cell shows a significant increase in efficiency with suppressed hysteresis, indicating the impressive potential of this strategy for developing highly efficient PQD solar cells.

In Situ Embedding Synthesis of CsPbBr3@Ce-MOF@SiO2 Nanocomposites for High Efficiency Light-Emitting Diodes: Suppressing Reabsorption Losses through the Waveguiding Effect

All-inorganic perovskite quantum dots (PQDs), which possess outstanding photophysical properties, are regarded as promising materials for optoelectronic applications. However, the poor light conversion efficiency and severe stability problem hinder their widespread applications. In this work, a novel encapsulation strategy is developed through the in situ growth of CsPbX₃ PQDs in presynthesized mesoporous cerium-based metal organic frameworks (Ce-MOFs) and further silane hydrolysis-encapsulation, generating stable CsPbX₃@Ce-MOF@SiO₂ composites with greatly enhanced light conversion efficiency. Moreover, the simulation results suggest that the pore boundary of Ce-MOFs has a strong waveguide effect on the incident PQD light, constraining PQD light inside the bodies of Ce-MOFs and suppressing reabsorption losses, thus increasing the overall light conversion efficiency of PQDs. Meanwhile, the Ce-MOF@SiO₂ protective shell effectively improves the stability by blocking internally embedded PQDs from the harmful external environment. Further, the obtained white-light-emitting diode shows an ultrahigh luminous efficiency of 87.8 lm/W, which demonstrates their great potential in optoelectronic applications.

Surface Chemistry Engineering of Perovskite Quantum Dots: Strategies, Applications, and Perspectives

The presence of surface ligands not only plays a key role in keeping the colloidal integrity and non-defective surface of metal halide perovskite quantum dots (PQDs), but also serves as a knob to tune their optoelectronic properties for a variety of exciting applications including solar cells and light-emitting diodes. However, these indispensable surface ligands may also deteriorate the stability and key properties of PQDs due to their highly dynamic binding and insulating nature. To address these issues, a number of innovative surface chemistry engineering approaches have been developed in the past few years. Based on an in-depth fundamental understanding of the surface atomistic structure and surface defect formation mechanism in the tiny nanoparticles, a critical overview focusing on the surface chemistry engineering of PQDs including advanced colloidal synthesis, in-situ surface passivation, and solution-phase/solid-state ligand exchange is presented, after which their unprecedented achievements in photovoltaics and other optoelectronics are presented. The practical hurdles and future directions are critically discussed to inspire more rational design of PQD surface chemistry toward practical applications.

All-inorganic perovskite quantum dots-based electrospun polyacrylonitrile fiber for ultra-sensitive trace-recording

All-inorganic dual-phase CsPbBr₃-Cs₄PbBr₆quantum dots (CPB QDs)-based polyacrylonitrile (PAN) fiber synthesized by supersaturated recrystallization and electrospinning technique possesses characteristics of homogeneous morphology, high crystallinity and solution sensitivity. Under 365 nm laser excitation, CPB@PAN fiber exhibits surprising trace-recording capability attributing to the splash-enhanced fluorescence (FL) performance with a narrow-band emission at 477-515 nm. In the process of ethanol anhydrous (EA) and water splashing, the CPB@PAN fiber presents conspicuous blue and green emission when contacting with EA and water, and maintains intense blue and green FL for more than 4 months. These experimental and theoretical findings provide a facile technology for the development of biological protection display, biotic detection and moisture-proof forewarning based on the trace-recording performance of CPB@PAN fiber.

Inner Filter Effect as a Boon in Perovskite Sensing Systems to Achieve Higher Sensitivity Levels

Perovskite quantum dots (PQDs) exhibit exceptional fluorescence property and are potential candidates for fluorescent metal-ion sensors. The present work shows the presence of inner filter effect (IFE) in perovskite sensing systems and its significance in enhancing the detection limits. Two different sensing systems (with a different extent of IFE), one with simple long-chain monodentate ligand-capped PQDs and the other with short-chain bidentate ligand capped PQDs, were developed toward sensing Co²⁺. The fluorescence quenching mechanism is elucidated and is observed to be a combination of Forster resonance energy transfer (FRET) and IFE. The electrostatic interaction of donor (D) with acceptor (A) and its distance for energy transfer was appropriate and was well within the requirement for a good energy transfer from PQDs (donor) to Co²⁺ ions (acceptor) facilitating partial FRET. Also, the spectral overlap of absorption of excited and emitted radiation (of PQDs) with that of Co²⁺ allows a significant amount of IFE. PQDs were successfully modified for lesser spectral overlap with reduced IFE. The reduction in IFE adversely drops the detection levels from 0.733 × 10^-7 to 0.7970 × 10^-6 on modification. This work provides insights into the design and development of high sensing perovskite probes with manipulation of IFE and also shows the importance of IFE to be considered during the study of such sensing systems, which has been neglected so far in perovskite systems.

Super Tough and Spontaneous Water-Assisted Autonomous Self-Healing Elastomer for Underwater Wearable Electronics

Self-healing soft electronic material composition is crucial to sustain the device long-term durability. The fabrication of self-healing soft electronics exposed to high moisture environment is a significant challenge that has yet to be fully achieved. This paper presents the novel concept of a water-assisted room-temperature autonomous self-healing mechanism based on synergistically dynamic covalent Schiff-based imine bonds with hydrogen bonds. The supramolecular water-assisted self-healing polymer (WASHP) films possess rapid self-healing kinetic behavior and high stretchability due to a reversible dissociation-association process. In comparison with the pristine room-temperature self-healing polymer, the WASHP demonstrates favorable mechanical performance at room temperature and a short self-healing time of 1 h; furthermore, it achieves a tensile strain of 9050%, self-healing efficiency of 95%, and toughness of 144.2 MJ m-3 . As a proof of concept, a versatile WASHP-based light-emitting touch-responsive device (WASHP-LETD) and perovskite quantum dot (PeQD)-based white LED backlight are designed. The WASHP-LETD has favorable mechanical deformation performance under pressure, bending, and strain, whereas the WASHP-PeQDs exhibit outstanding long-term stability even over a period exceeding one year in a boiling water environment. This paper provides a mechanically robust approach for producing eco-friendly, economical, and waterproof e-skin device components.

Robust and Flexible Random Lasers Using Perovskite Quantum Dots Coated Nickel Foam for Speckle-Free Laser Imaging

The advantage of using flexible metallic structures as the substrate of flexible lasers over plastic materials is its strong mechanical strength and high thermal conductivity. Here, it is proposed to deposit CsPbBr₃ perovskite quantum dots onto Ni porous foam for the realization of flexible lasers. Under two-photon 800 nm excitation at room temperature, incoherent random lasing emission is observed at ≈537 nm. By external deformation of the Ni porous foam, incoherent random lasing can be tuned to amplified spontaneous emission as well as the corresponding lasing threshold be controlled. More importantly, it is demonstrated that the laser is robust to intensive bending (>1000 bending cycles) with minimum effect on the lasing intensity. This flexible laser is also shown to be an ideal light source to produce a "speckle" free micro-image.

Brightening of Dark States in CsPbBr3 Quantum Dots Caused by Light-Induced Magnetism

Lead halide perovskite quantum dots (QDs) have shown great potential for optoelectronic and quantum photonic applications. Although controversy remains about the electronic fine structures of bulk perovskites due to the strong spin-orbit coupling affecting the conduction bands, compelling evidence indicates that the ground states of perovskite QDs remain dark, limiting their applications in optoelectronic devices. Here, it is demonstrated that photoexcitation can induce large intrinsic magnetic fields in Mn-doped CsPbBr₃ perovskite QDs. Equivalent to applying an external magnetic field, the light-induced field causes giant Zeeman splitting to the bright triplet states and brightens the dark singlet ground state, thus effectively rendering a partially bright ground state in the doped QDs. These findings here may contribute to the understanding of the electronic fine structures in perovskite QDs and demonstrate a potential approach for creating semiconductor nanostructures that can serve as bright light sources.

Ytterbium-Doped CsPbCl3 Quantum Cutters for Near-Infrared Light-Emitting Diodes

Exploring highly efficient near-infrared (NIR) emitting materials is desirable for the advancement of next-generation smart NIR light sources. Different from most reported Cr³⁺-doped emitters with far-red emissions, Yb³⁺-activated phosphors are expected to yield pure NIR (∼1000 nm) light. Herein, a new hot-injection route using all metal-oleate salts to fabricate Yb³⁺-doped CsPbCl₃ perovskite nanocrystals (PeNCs) is reported for the first time, which produce PeNC-sensitized Yb³⁺ NIR emission with photoluminescence quantum yields (PLQYs) higher than 100%. With the help of temperature-dependent PL spectra, femtosecond transient absorption spectra, and time-resolved PL spectra, it is evidenced that the in situ produced intrinsic shallow trap states in a CsPbCl₃ host play a key role in facilitating the picosecond nonradiative cooperative energy transfer from PeNCs to two Yb³⁺ dopants simultaneously. Using the optimized Yb³⁺:CsPbCl₃ quantum cutters, a phosphor-converted NIR light-emitting diode (pc-NIR-LED) is fabricated, exhibiting an external quantum efficiency of 2%@28 mA, a high NIR output irradiance of 112 mW/cm²@400 mA, and excellent long-term stability. Finally, the designed pc-NIR-LED is demonstrated to have great potential as an invisible night-vision light source.

Dual-Mode Plasmonic Coupling-Enhanced Color Conversion of Inorganic CsPbBr3 Perovskite Quantum Dot Films

Plasmonic coupling has been demonstrated to be an effective manipulation strategy for emission enhancement in low-dimensional semiconductor materials. Here, dual-mode plasmonic resonances based on a metal dimer structure were proposed to simultaneously enhance the absorption under short-wavelength excitation and excitons' emission at longer wavelengths for CsPbBr₃ perovskite quantum dots (QDs). Large-area metal nanodimer arrays with well-controlled local surface plasmon resonance were facilely fabricated by a simple method combined with metal angular deposition and nanosphere lithography. With the addition of an optimized polymethyl methacrylate spacer, the effective plasmonic coupling and interfacial passivation of QDs were successfully achieved in the hybrid system. As a result, the QD films exhibited a significant and approximately 3.95-fold overall fluorescence enhancement when using blue light excitation, showing the novel advantages of dual-mode plasmonic coupling of semiconductor quantum structures for color conversion applications.