Effects of aging methods on the adsorption of antibiotics in wastewater by soybean straw biochar

BACKGROUND

The environmental pollution and ecological risks caused by the widespread use of antibiotics have attracted attention in recent years. Biochar materials have a rich pore diameter and can effectively adsorb pollutants from wastewater. However, biochar will experience high temperatures, freezing and thawing in nature, affecting its physicochemical properties and adsorption capacity. Three types of aged biochar were prepared by artificial simulated aging using soybean straw as raw material. The aged biochar's elemental composition and functional group species were investigated by characterization analysis, and their adsorption kinetics and adsorption isotherms were studied.

RESULTS

The specific surface area and pore size of the three aged biochars were lower than those of fresh biochars. The increased number of oxygen-containing functional groups of the aged biochars formed a water cluster interaction with norfloxacin (NOR), which was unfavorable to the adsorption of NOR. The adsorption mechanism of biochar on NOR comprises pore filling, electrostatic interaction, ion exchange and complexation.

CONCLUSION

The adsorption of NOR on biochar before and after aging was spontaneous and was described by quasi-second kinetics and the Langmuir equation. Different aging methods influenced the physicochemical properties and adsorption performance of biochar, and the adsorption capacity of biochar was significantly reduced after aging. Therefore, the influence of climatic factors needs to be considered when using biochar to remove target pollutants. © 2023 Society of Chemical Industry.

Solid leather wastes as adsorbents for cationic and anionic dye removal

The removal of anionic and cationic dyes from aqueous solutions was investigated by different leather shavings, which are solid wastes generated in the leather industry. Wet-blue leather shavings (WB), vegetable-tanned leather shavings (VT), pickled hide (not tanned) shavings (PIC) and wet-white leather (pre-tanned) shavings (WW) were used. The cationic dye was Basic Red 2 and the anionic dye was Acid Brown 414. Point of zero charge, functional groups, shrinkage temperature and adsorbent surface area were characterized. The point of zero charge was 4.0, 6.0, 3.9 and 4.1 for WB, VT, PIC and WW, respectively. The specific surface area showed low values which was expected for this type of material. Tanning agent influence was verified through shrinkage temperature analysis of leather shavings. Main functional groups of the acid dye and the collagen structure of the solid wastes were determined. The tests with Basic Red 2 solutions showed only VT had a considerable removal for this cationic dye (96.7%). The tests with Acid Brown 414 were carried out with different contact times and adsorbent mass. Results showed high efficiency of WW and PIC, whose percentages of dye removal were above 96% at contact time of 30 min and above 90% using 20 mg of adsorbent. In this way, the final dye removal was 98.1% and 98.3% for contact time tests and 97.7% and 98% for adsorbent mass tests for WW and PIC, respectively. These results highlight the promising use of leather shavings as alternative adsorbents for the treatment of wastewater containing dyes.

The Isoelectric Point of an Exotic Oxide: Tellurium (IV) Oxide

The pH-dependent surface charging of tellurium (IV) oxide has been studied. The isoelectric point (IEP) of tellurium (IV) oxide was determined by microelectrophoresis in various 1-1 electrolytes over a concentration range of 0.001–0.1 M. In all electrolytes studied and irrespective of their concentration the zeta potential of TeO₂ was negative over the pH range 3–12. In other words the IEP of TeO₂ is at pH below 3 (if any). TeO₂ specifically adsorbs ionic surfactants, and their presence strongly affects the zeta potential. In contrast the effect of multivalent inorganic ions on the zeta potential of TeO₂ is rather insignificant (no shift in the IEP). In this respect TeO₂ is very different from metal oxides.

Improved Virus Isoelectric Point Estimation by Exclusion of Known and Predicted Genome-Binding Regions

Knowledge of the isoelectric points (pIs) of viruses is beneficial for predicting virus behavior in environmental transport and physical/chemical treatment applications. However, the empirically measured pIs of many viruses have thus far defied simple explanation, let alone prediction, based on the ionizable amino acid composition of the virus capsid. Here, we suggest an approach for predicting the pI of nonenveloped viruses by excluding capsid regions that stabilize the virus polynucleotide via electrostatic interactions. This method was applied first to viruses with known polynucleotide-binding regions (PBRs) and/or three-dimensional (3D) structures. Then, PBRs were predicted in a group of 32 unique viral capsid proteome sequences via conserved structures and sequence motifs. Removing predicted PBRs resulted in a significantly better fit to empirical pI values. After modification, mean differences between theoretical and empirical pI values were reduced from 2.1 ± 2.4 to 0.1 ± 1.7 pH units.IMPORTANCE This model fits predicted pIs to empirical values for a diverse set of viruses. The results suggest that many previously reported discrepancies between theoretical and empirical virus pIs can be explained by coulombic neutralization of PBRs of the inner capsid. Given the diversity of virus capsid structures, this nonarbitrary, heuristic approach to predicting virus pI offers an effective alternative to a simplistic, one-size-fits-all charge model of the virion. The accurate, structure-based prediction of PBRs of the virus capsid employed here may also be of general interest to structural virologists.

Some Properties of Electron Beam-Irradiated Sheep Wool Linked to Cr(III) Sorption

We examined the characteristics of an electron beam irradiated wool with an absorbed dose of (21–410) kGy in comparison with natural wool with respect to the determination of the isoelectric point (IEP), zero charge point (ZCP), mechanism of Cr(III) sorption from higher concentrated solutions, and the modelling of the wool-Cr(III) interaction. The data of ZPC and IEP differed between natural and irradiated samples. Increasing the dose shifted the pH of ZPC from 6.85 for natural wool to 6.20 for the highest dosed wool, while the natural wool IEP moved very little, from pH = 3.35 to 3.40 for all of the irradiated samples. The sorption experiments were performed in a pH bath set at 3.40, and the determination of the residual Cr(III) in the bath was performed by VIS spectrometry under optimized conditions. The resulting sorptivity showed a monotonically rising trend with increasing Cr(III) concentration in the bath. Lower doses, unlike higher doses, showed better sorptivity than the natural wool. FTIR data indicated the formation of complex chromite salts of carboxylates and cysteinates. Crosslinks via ligands coming from different keratin chains were predicted, preferably on the surface of the fibers, but to a degree that did not yet inhibit the diffusion of Cr(III)-cations into the fiber volume. We also present a concept of a complex octahedral structure.

Influence of electro-osmosis on physicochemical parameters and microstructure of clay soils

The change in properties and structure of clay soils due to electro-osmosis was studied. These alterations were exemplified by mantle loam and kaolin. It is shown that electro-osmotic treatment of the soils on the open scheme resulted in the transformations in their moisture content, total and dry density, salinity, pH, and the parameters of their particles. The most notable changes occurred within the diffuse double layers (DDLs) of soil particles such as their recharge in the anodic zone. The transformations of the loam particles DDLs resulted in their aggregation in the cathodic and anodic zones. Also, electro-osmotic flow caused the redistribution of pore sizes within the soils between the electrodes. In the case of the kaolin, electro-osmosis resulted in the formation of the anisotropic, flow-oriented structure. The change in the types of soil particles contacts formed was observed during electro-osmosis as well. The obtained data can be used to study the behavior of soil during electro-osmosis as a function of the soil type.

Soil organic matter doubles the cation exchange capacity of tropical soil under no-till farming in Brazil

BACKGROUND

Agricultural conservation practices increase total organic carbon storage in soil (T_OCS ), a factor that is correlated with the physical and chemical qualities of highly weathered soils. In this study, we investigated the effects of T_OCS on the physicochemical attributes of a Latosol after 10 years of no-till management in Mato Grosso State, Brazil.

RESULTS

T_COS was highly correlated (r = 0.92) with cation exchange capacity (CEC, pH = 7) and soil density. In the top 0.2 m soil layer, CEC increased by 25% with every 1.8 kg m^-2 of stored organic carbon. Eliminating soil organic matter reduced CEC from an already low value of 8.40 cmol_c kg^-1 to 4.82 cmol_c kg^-1 . Humus is therefore clearly important for the formation of a negative liquid charge in a predominantly electropositive but clayey soil.

CONCLUSION

We confirmed that T_OCS is an indicator related to the physiochemical characteristics of weathered soils. Furthermore, our results demonstrate that the increased carbon storage under non-tilling systems is essential for guaranteeing weathered soil fertility in tropical climates. © 2018 Society of Chemical Industry.

Role of DDL processes during electrolytic reduction of Cu(II) in a low oxygen environment

Heavy metals typically accumulate in reduced bottom sediments after being discharged into waterways by industrial and municipal processes. A laboratory experiment was conducted in order to determine if abundance of clay in the bottom sediments of a Cu-contaminated aqueous ecosystem could enhance electrolytic reduction of the heavy metal. Cu(NO3)2 · 2.5H2O was added to simulate a moderately contaminated system with 650 μg Cu/ml kaolinite clay-water slurry. A constant electrical potential of 1.0 V/cm was applied across platinum wire electrodes inserted into the continuously stirred system for four days while the system ORP(2) was monitored and periodic sub-samples were taken for analysis. The electrical as well as the chemical results indicate that the quantity of Cu(II) being reduced to Cu(I), especially within the aqueous phase, is increased within the first 48 h of experimentation by the presence of kaolinite clay up to 0.05 mg clay/l slurry.