A case of surgical treatment for bronchial foreign bodies with obstructive pneumonia

Children and older adults are prone to unintentional foreign body aspiration. A 69-year-old man with fever and anorexia presented with obstructive pneumonia resulting from foreign body aspiration. Attempts to remove the foreign body using a bronchoscope failed due to its adhesion to the periphery of the bronchus. Although antibiotic therapy did not improve the obstructive pneumonia caused by the bronchial foreign body, surgery enabled an improvement. The surgical specimen showed similar pathological findings as the fine brown granular material observed in root granulomas occurring as a complication following leakage of root canal filling used in the treatment of dental caries. Therefore, the bronchial foreign body may have been a dental filling. Case reports describing surgical improvement of difficult-to-remove bronchial foreign bodies with concurrent infection are rare.

Can the addition of surfactants to NaOCl irrigation impact on the percentage of voids of root canal filling?

This study evaluated the impact of canal irrigation using surfactants associated to NaOCl on the percentage of voids of root canal filling through micro-computed tomographic (micro-CT) analysis. 27 mandibular mesial roots with Vertucci type II canal configuration with isthmus were selected and scanned in a micro-CT device. The specimens were assigned to three groups (n = 9), according to the irrigation solution during instrumentation: 2.5% NaOCl without additives (control), 2.5% NaOCl with 0.1% Benzalkonium Chloride and 2.5% NaOCl with 0.1% Tween 80. After obturation, the specimens were rescanned, and the percentage of voids were calculated. Data were analysed using one-way ANOVA with a significance level of 5%. The percentage of voids were similar among the groups (p > 0.05). None of the specimens showed completely voids-free areas. The addition of surfactants to NaOCl irrigation did not improve the quality of root canal filling of mandibular mesial root canals.

Effect of ultrasonic agitation on marginal adaptation, intratubular penetration and bonding strength of calcium-silicate-based endodontic sealers: A laboratory study

The effect of ultrasonic activation (UA) on marginal adaptation, intratubular penetration and bond strength provided by three calcium silicate-based sealers was evaluated. Ninety-six distobuccal root canals of maxillary molars were randomly divided into 8 groups (n = 12) according to the sealer and UA application: EndoSequence BC sealer (ESBC), Sealer Plus BC (SPBC) and Bio-C Sealer (BCS), using AH Plus (AH) as a control group. The specimens were sectioned at 2, 4 and 6 mm from the apex. The data were statistically analysed using Kruskall-Wallis, Dunn, Mann-Whitney and chi-squared tests. UA improved the marginal adaptation of ESBC (6 mm), SPBC (all levels), BCS (2/4 mm) and AH (4 mm) (p < 0.05); the bond strength of SBPC (2 mm) and BCS (6 mm) were also improved (p < 0.05). The UA of endodontic silicate-based sealers improved the marginal adaptation in all levels and the bond strength of SBPC and BCS sealer.

Effectiveness of root canal filling materials and techniques for treatment of apical periodontitis: A systematic review

BACKGROUND

Apical periodontitis (AP) is an inflammatory disease of the apical periodontium as sequelae of pulp death. It is managed by disinfection and filling of the root canal space.

OBJECTIVES

The aim of this systematic review was to investigate whether obturation techniques and materials used for root canal filling led to the management of AP.

METHODS

A systematic review protocol was written following the preferred reporting items for systematic reviews and meta-analyses (PRISMA) checklist and registered on the international prospective register of systematic reviews (PROSPERO; CRD42021260275) including two populations, interventions, comparisons, outcomes and time (PICOT) for the research questions querying the effectiveness of obturation techniques (PICOT 1) and materials (PICOT 2) for the management of AP. Electronic searches were conducted on PubMed, ScienceDirect, Scopus and Embase search engines. Searches on International Endodontic Journal, Journal of Endodontics, Clinical Oral Investigations, Journal of Dental Research and Journal of Dentistry websites were also conducted, until May 2021. Both primary (tooth survival) and secondary outcomes were evaluated. The risk of bias was assessed by Cochrane RoB2 for the randomized and ROBINS-I for the nonrandomized trials.

RESULTS

The search strategy identified 1652 studies, with 1600 excluded on the title and abstract screening, leaving 52 studies for full-text screening. In total, 10 studies met the inclusion criteria. The obturation technique and materials used did not affect the outcome of AP. Vertical compaction resulted in faster resolution of periapical lesions. The oral health-related quality of life of patients treated with lateral condensation exhibited poorer outcomes compared with single matched cone after 6 months of recall.

DISCUSSION

The inclusion and exclusion criteria used for this systematic review enabled the capture of all the literature available on the effect of obturation techniques and materials on the outcome of AP. The data were heterogenous, and a number of articles investigating obturation techniques had no information on the materials and techniques used as they looked at the quality of fill.

CONCLUSIONS

Included studies did not find any difference between different procedures (PICOT 1) and materials (PICOT 2). The risk of bias was high, thus the findings should be interpreted with caution.

REGISTRATION

PROSPERO registration number: CRD42021260275.

A comparison of online and face-to-face modalities in endodontic preclinical education: A retrospective study

PURPOSE

The aim of this study was to evaluate the competency of undergraduate students in following the principles of access cavity preparation and the radiographic quality of root canal filling in maxillary molar teeth in either online or face-to-face education courses during the novel coronavirus disease 2019 (COVID-19) pandemic.

METHODS

A total of 178 extracted maxillary molar teeth that underwent endodontic dental treatment by undergraduate students who completed the endodontic preclinical practice course online or face-to-face during the COVID-19 pandemic were retrospectively analyzed. A visual access cavity examination determined the form, width of the cavity, deroofing of the pulp chamber, and the presence of a perforation. Root canal fillings were examined radiographically on periapical radiographs for length, homogeneity, taper, and the presence of iatrogenic defects. Statistical analysis was performed using the chi-square test.

RESULTS

The incidence of incorrect form, wide cavities, and perforation was statistically higher in the online group than in the face-to-face group (p < 0.05). It was determined that root filling length and homogeneity were more successful in the face-to-face group (p < 0.05). When evaluated for iatrogenic errors, the presence of broken instruments was found to be significantly higher in the online group (p < 0.05). There was no significant difference between the groups in other iatrogenic errors and the taper of the root canal filling (p > 0.05).

CONCLUSION

The students who underwent face-to-face education were more successful in accessing cavity preparation and root canal fillings than the students who undertook online education.

Influence of sealer type on treatment outcome of teeth with apical periodontitis: a systematic review

BACKGROUND

The purpose of this article was to Evaluate the influence of sealer on the outcome of non-surgical endodontic treatment or retreatment of permanent teeth with apical periodontitis (PROSPERO registration: CRD42020205951).

METHODOLOGY

A systematic review of original clinical studies was carried out following PRISMA guidelines to answer whether the type of sealer used in endodontic treatment or retreatment influences the repair of apical periodontitis determined by clinical and radiographic parameters. Electronic searches were performed in PubMed, Embase, Web of Science, Scopus, and the Cochrane Library database, until May 2023. Gray literature and a hand search of reference lists were also performed. The risk of bias was assessed using Cochrane RoB2 for randomized trials and the Newcastle-Ottawa Scale (NOS) for prospective and retrospective cohort and case-control studies.

RESULTS

Among 1046 studies, a total of 819 were selected by title and abstract, resulting in 23 for full-text review. In total, 11 studies met the inclusion criteria (1467 patients/teeth with apical periodontitis). The quality assessment using RoB2 included five randomized control trials, of which four had medium risk and one had a low risk of bias. According to the NOS scale, five studies were classified as low risk and one study was considered as medium risk of bias. The sealer type and obturation techniques varied, and the mean follow-up time was 3.7 years. Most studies used two-dimensional radiographic criteria to assess the treatment outcome sealers and not cements. Eight studies did not find significant differences when comparing cements. The healing rates ranged from 56.7% to 90%.

CONCLUSIONS

The results of this review support that the current endodontic sealers do not seem to influence the treatment outcome of permanent teeth with apical periodontitis. Although the studies had medium and low risk of bias, the results should be interpreted with caution. More randomized studies of long-term outcomes comparing filling materials are needed to strengthen this claim and allow for a meta-analysis.

The Contribution of Various In Vitro Methodologies to Comprehending the Filling Ability of Root Canal Pastes in Primary Teeth

A void-free obturation during root canal treatment on primary teeth is currently very difficult to attain. In this study, the pulpectomy filling abilities of Bio-C Pulpecto (Angelus, Basil, Londrina, Paraná, Brazil) and of zinc oxide eugenol, or "ZOE" (DenPro, Prevest, New York, NY, USA), were compared using several in vitro techniques. Therefore, 30 primary anterior teeth were used in the present in vitro study. Analysis of variance (ANOVA), including a multiple comparison procedure (Holm-Sidak method, Dunn's Method, or Tukey test), was used. On micro-CT, Bio-C Pulpecto exhibited higher void percentages than did ZOE (10.3 ± 3.8%, and 3.5 ± 1.3%), respectively (p < 0.05). With digital microscopy, higher total void percentages were found in the BC (13.2 ± 26.7%) group compared to the ZOE (2.7 ± 2.8%) group (p < 0.05). With the CLSM, mean tubular penetration depths were higher for Bio-C Pulpecto than for ZOE in all canal thirds (p < 0.05). SEM images demonstrated no tags into dentinal tubules in either group throughout the three thirds. Moreover, higher statistically significant flowability was found for Bio-C (2.657 ± 0.06 mm) compared to ZOE (1.8 ± 0.13 mm) (p < 0.05). The findings of this study indicate that neither ZOE nor Bio-C Pulpecto appears to meet the criteria for an ideal root canal filling paste for primary teeth. This study laid the groundwork for future research by determining how micro-CT, digital microscopy, SEM, and CLSM contribute to our understanding of the filling process of primary teeth. More thorough research on the mechanism of root canal obturation on primary teeth is required to achieve a long-term successful root canal therapy in young children.

Effect of Carbodiimide (EDC) on the Bond Strength Longevity of Epoxy Resin-based Endodontic Sealer to Root Dentin: An In-Vitro Study

PURPOSE

EDC (1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride) can increase dentin bonding longevity. This study aimed to evaluate the effect of final irrigation of the root canal with EDC on the bond strength (BS) longevity of an epoxy resin-based root-canal sealer.

MATERIALS AND METHODS

Twenty maxillary canines were sectioned and standardized for root length at 17 mm. Roots were instrumented and distributed into 2 groups according to the final irrigation protocol: EDTA 17%+NaOCl 2.5% (C) and EDTA 17%+NaOCl 2.5%+EDC 0.5M (EDC). The canals were dried and filled with AH Plus (Dentsply Sirona). Three slices were obtained per third, and the first slice from each third was used for the immediate push-out test (i) followed by analysis of the failure pattern (n = 10); the second slice from each third was used for the push-out test after 6-month aging (A) followed by analysis of the failure pattern (n = 10); the third slice from each third was used to examine the adhesive interface under confocal laser scanning microscopy (CLSM) (n = 10). Data were analyzed with ANOVA, Fisher's exact and Kruskal-Wallis tests.

RESULTS

Higher BSs were found for EDC-A (5.6 ± 1.9) than for EDC-I (3.3 ± 0.7), C-i (2.5 ± 1.0) and C-i (2.6 ± 1.0) (p = 0.0001), while C-A values were in some cases similar to C-i and in others similar to EDC-i. No statistically significant difference was observed between the thirds (p > 0.05), except for EDC-i, which showed lower BS for the cervical (2.79 ± 0.46) compared to the apical third (3.8 ± 0.5), while the middle third in some cases had values similar to those of the apical and in others to the cervical third (3.2 ± 0.7) (p = 0.032). More mixed adhesive failures were found in the cervical third, and more adhesive failures to the sealer occurred in the middle and apical thirds (p = 0.014). A significant difference was observed between treatments in terms of adaptation of the adhesive interface, with a higher percentage of good adaptation using EDC (66.7%) than using C (40%), and a lower percentage of poor adaptation with EDC (10%) compared to C (20%) (p < 0.05).

CONCLUSION

Root canal irrigation with EDC increased the longevity of the adhesive interface of an epoxy resin-based root-canal sealer.

Comparative evaluation of the effect of calcium silicate and epoxy resinbased root canal sealers on postoperative pain in patients with primary endodontic lesion: A randomized clinical study

Introduction

This study's objective was to assess and compare postoperative pain response between bioceramic sealer (Nishika BG) and epoxy resin based (AH Plus) in patients with primary endodontic lesion at time interval of 24 h, 48 h, and 7 days using the Visual Analog Scale (VAS).

Materials and Methods

The study included 40 individuals with necrotic pulp and apical periodontitis. Calcium hydroxide was administered as the intracanal medication during the two-visit endodontic therapy. They were subsequently allocated randomly to either the AH Plus root canal sealer or the Nishika Canal Sealer BG, with a total of 20 participants in each group. Patients were told to use a VAS to rate their postoperative pain severity as none, minimal, moderate, or severe after 24 h, 48 h, and 7 days following obturation using the appropriate sealers.

Results

Nishika Canal Sealer BG (CS-BG) has a lower pain score as compared to the AH Plus group at 24-h time point. VAS ratings for both the groups decreased over time. According to the intergroup analysis, there was a significant difference in postoperative pain at the 24 h (P = 0.022), but not at the 48 h or 7 days (P > 0.05).

Conclusion

Although bioceramic sealer (Nishika Canal Sealer BG) resulted in significantly lower levels of pain as compared to epoxy resin-based sealer (AH Plus) at 24-h interval, there was no significant difference of postoperative pain at 48-h interval and 7-day period.

New Ultrasonic Tip for Root Canal Filling of the Mesial Canals of Mandibular Molars with Isthmus: A Laboratory Evaluation Using Computed Microtomography

INTRODUCTION

The obturation quality of the mandibular molar mesial canals and isthmuses with two thermoplastic techniques, ultrasonic vertical condensation (UVC) and continuous wave of condensation (CWC), was evaluated using computed microtomography (μCT).

METHODS

Thirty-six human mandibular molars had been previously scanned and analyzed using μCT for mesial roots with morphologically similar isthmuses for this study. Coronal access and confirmation of foraminal patency were performed, and the actual length of the teeth was established using a clinical microscope (40X magnification). The canals were prepared using ProTaper Gold instruments up to #F3, with 2.5% sodium hypochlorite as the irrigant solution, followed by a passive ultrasonic irrigation protocol. The specimens were randomly divided into the UVC and CWC groups based on the obturation technique to be used. Obturation was performed with #F3 gutta-percha cones cemented using AH Plus Jet sealer. The μCT scans were performed after 15 days, and the images were evaluated by a calibrated examiner blinded to the experimental groups to determine the filling rate of the entire canal area, including the main canal and isthmus. Student's t-test was used for statistical analysis; P values ≤0.05 were considered significant.

RESULTS

Neither of the thermoplastic obturation techniques achieved complete filling of the canals (86.3% for UVC and 91.4% for CWC), with a statistically significant difference between them (P = .029).

CONCLUSIONS

Under the conditions of the study, it can be concluded that none of the techniques completely filled the canal/isthmus of the mandibular molars; however, the CWC exhibited better performance.

Physicochemical and Antibacterial Properties of Conventional and Two Premixed Root Canal Filling Materials in Primary Teeth

In this study, some physicochemical and antibacterial properties of three root canal filling materials for primary teeth, Calplus “CP” (Prevest DenPro, Lewes, DE, USA), Bio-C Pulpecto “Bio-CP” (Angelus, Basil, Londrina, Paraná, Brazil), and Zinc Oxide and Eugenol “ZOE” (Prevest DenPro, Lewes, DE, USA) were compared. For each material, the pH, solubility, contact angle, and crystalline microstructure under SEM were evaluated. Their antibacterial activity against Enterococcus faecalis was determined through direct tests. The Kruskal−Wallis test was used to analyze the results using a one-way analysis of variance on ranks. All the materials had an alkaline pH at 3, 24, and 72 h, with CalPlus having the highest (p < 0.05). Bio-CP was more soluble during the evaluation period (24 h) than ZOE and CalPlus (p < 0.05). Bio-CP and ZOE demonstrated the creation of crystallite structures on their surfaces after immersion in PBS at 37 °C, whereas CalPlus showed none. The lowest contact angle was observed for Bio-CP (53 ± 1.5°); contact angles of (86 ± 4°) and (96 ± 1°), respectively, were observed after 10 s of the deposition of the water drop for CalPlus and ZOE. In conclusion, according to this study, there is still a need to develop new filling materials for primary teeth. ZOE, CalPlus and Bio-CP demonstrated different physicochemical and antibacterial properties, but none of the materials had optimal properties and could be considered the most suitable filling material for primary teeth pulpectomy. Bioceramics in their current state are not an alternative. The physicochemical and antibacterial properties still need improvement to fit the intricate anatomy of primary teeth.

Pilot Evaluation of Sealer-Based Root Canal Obturation Using Epoxy-Resin-Based and Calcium-Silicate-Based Sealers: A Randomized Clinical Trial

The purpose of this randomized controlled clinical trial was to assess the short-term clinical effectiveness of sealer-based root canal obturation using calcium-silicate-based sealer (CSBS) and epoxy-resin-based sealer (ERBS). A total of eighty patients (eighty teeth) were enrolled and seventy-two patients (seventy-two teeth) were randomly assigned into four different sealer groups: AH Plus (AH, Dentsply Sirona), ADseal (AD, Meta Biomed), CeraSeal (CS, Meta Biomed), or EndoSeal TCS (ES, Maruchi). At the first visit, root canal treatment was performed using ProTaper. Next, the NiTi file system and passive ultrasonic irritation was applied with 2.5% NaOCl. At the second visit, the teeth were obturated with a sealer-based obturation technique using the assigned sealer. The quality of filling obturation was evaluated with postoperative radiographs in terms of the presence of voids and sealer extrusion. The patients were recalled at 1-week, 1-month, and 3-month intervals, and pain levels were measured using visual analog scales (VAS), and clinical examination performed with percussion and palpation. Radiographs were also taken. The results were statistically compared by using the χ2 test or Fisher exact test. Among the 80 teeth included, 72 teeth received allocated intervention and 71 teeth were included in the analysis (98.6% recall). There was no significant difference among the sealers in void and sealer extrusion (p > 0.05). Postoperative pain was not indicated prominently regardless of the type of sealer. For a 3-month follow-up period, all cases were maintained successfully except for one case from AD. According to the findings, there was no significant difference between CSBS and ERBS in terms of postoperative pain or the healing process, and the variation in filling quality appears to be linked to the properties of each product.

[Analysis of root sealing using methylene blue in different endodontic obturation techniques. Literature review]

One of the biggest drawbacks in endodontic filling is the problem of insufficient root sealing, due to the microleakage of bacteria into the canal. The objective of the research was to carry out a narrative review of the characteristics of the use of methylene blue as an evaluator of microleakage in studies that compared the quality of root sealing with different endodontic filling techniques. The research method used was literature review. Methylene blue was used in experimental in vitro studies, which compared filling techniques such as lateral condensation, cold injectable gutta-percha, thermomechanics, among others, the sealed dental pieces were immersed in a 1% methylene blue dye at 5% concentration. This procedure allowed reevaluating the samples in different periods of time. In conclusion, for endodontic filling penetration testing, methylene blue is an easy-to-use and reliable option.

Traditional Filling Techniques: A Systematic Review and Meta-Analysis of Randomized Controlled Trials

This meta-analysis aimed to evaluate postoperative pain (POP) following root canal filling (RCF) with gutta-percha/bioceramic sealer (BCS) vs. gutta-percha/traditional sealer (TS) techniques. Electronic databases were searched for randomized trials. Subgroup analyses were performed for analgesic intake, flare-ups, postoperative time (24/48 h), pulp status, and retreatment. The search yielded 682 records, and nine studies were selected. BCS was associated with significantly lower POP vs. TS at 24 h (P = 0.04) and 48 h (P = 0.0005). In addition, non-significant trends favoring BCS for analgesic intake at 24 h (P = 0.14), flare-ups (P = 0.24) and obturation techniques at 24 h (P = 0.41) and 48 h (P = 0.33), non-significant trends for lower POP with TS vs. BCS 24 h and 48 h in vital teeth (P = 0.50, P = 0.18, respectively), and for lower POP with BCS vs. TS in non-vital teeth at 24 h and 48 h (P = 0.16, P = 0.84, respectively). POP was numerically lower with TS vs. BCS at 24 h (P = 0.65) and 48 h after retreatment (P = 0.59). Moreover, POP did not vary between fillers when the treatment was over single (P = 0.28) or multiple visits (P = 0.50). BCS was associated with significantly lower short-term POP, and with a trend for lower analgesic intake and flare-up incidence, as compared to TS.

Micro-computed Tomographic Evaluation of the Quality of Root Canal Fillings in Mandibular Molars after Obturation for 54 Months

INTRODUCTION

The present study evaluated the percentage volume of voids in root canals of mandibular molars that had been obturated for 54 months.

METHODS

Thirty extracted human mandibular molars were instrumented and debrided. The teeth were assigned to 3 groups (n = 10) according to the filling technique and sealer used: the single-cone technique using AH Plus sealer (AHS; Dentsply Sirona Endodontics, Tulsa, OK) or EndoSequence BC sealer (BCS; Brasseler USA Dental LLC, Savannah, GA) and the warm vertical compaction technique using AH Plus sealer (AHW). The specimens were stored at 37°C and 100% humidity. Micro-computed tomographic imaging was used to scan each specimen 1 day 54 months after obturation. Data were analyzed using 1-way analysis of variance and the paired t test.

RESULTS

The percentage volume of voids in the teeth 1 day after obturation in the AHS group was higher than in the BCS group and the AHW group (P < .05). After 54 months, the proportion of voids decreased in all groups (P < .05). No significant difference was observed between the AHS group and the BCS group after 54 months. Teeth in the AHW group contained fewer voids than the AHS group (P < .05).

CONCLUSIONS

Voids in root canal filling were reduced 54 months after obturation. The warm vertical compaction technique achieved better root canal filling quality in mandibular molars than the single-cone technique when using AHS after long-term storage at 100% humidity.

Complete Obturation-Cold Lateral Condensation vs. Thermoplastic Techniques: A Systematic Review of Micro-CT Studies

To prevent re-infection and provide a hermetic seal of the root canal system, an endodontist must aim to produce a void-free obturation. This review aimed to compare the completeness of root canal obturation between the two most prevalent methods-cold lateral condensation and warm gutta-percha techniques-using micro-CT (PROSPERO reg no. 249815).

MATERIALS AND METHODS

A search of Scopus, Embase, PubMed (Medline via PubMed), and Web of Science databases was done without any time restriction according to the PRISMA protocol. Articles that compared both techniques and were published in English were included. Data was extracted and the risk of bias was assessed using an adapted tool based on previous studies.

RESULTS

A total of 141 studies were identified by the search. Following the screening and selection of articles, 9 studies were included for review. Data was extracted manually and tabulated. Most studies had a moderate risk of bias. None determined operator skill in both methods before comparison. The data extracted from the included studies suggests that both techniques produce voids in the obturation. The thermoplasticized gutta-percha techniques may result in fewer voids compared to cold lateral condensation.

CONCLUSION

Considering the limitations of the included studies, it was concluded that neither technique could completely obturate the root canal. Thermoplasticized gutta-percha techniques showed better outcomes despite a possible learning bias in favor of cold lateral condensation. Establishing operator skills before comparison may help reduce this bias.

Evaluation of curved root canals filled with a new bioceramic sealer: A microcomputed tomographic study using images with different voxel sizes and segmentation methods

The aim of this study was to investigate the filling ability of a new premixed bioceramic sealer in comparison with an epoxy resin-based sealer in curved root canals using different segmentation methods and voxel sizes in micro-CT images. Twelve curved mesial roots of mandibular molars with two separated canals were selected. All root canals were prepared by using HyFlex EDM files size 25/.08 and filled by the single cone technique and Bio-C Sealer or AH Plus (n = 12). The samples were scanned by micro-CT at 5 μm. The images were analyzed at 5, 10, and 20 μm for the volumetric analysis of voids in filling. Visual image segmentation was performed by two examiners, and the automatic segmentation was accomplished for comparison. Radiopacity of the sealers was evaluated by radiographic analysis. Data were submitted to the two-way ANOVA and non-paired t tests at a significance level of 5%. AH Plus had the highest radiopacity (p < .05). Root canals filled with AH Plus or Bio-C had similar low percentage of voids (p > .05). There was no difference interobserver, which had similar results to those obtained with automatic segmentation for all voxel sizes evaluated (p > .05). Bio-C Sealer had appropriate filling ability. Visual and automatic segmentation can be applied to micro-CT images with voxel sizes from 5 to 20 μm to evaluate the filling of sealers with adequate radiopacity. Automatic segmentation should be used as a faster method.

Ultrasonic vibration and thermo-hydrodynamic technique for filling root canals: Technical overview and a case series

AIM

To present a novel root canal filling technique: Ultrasonic Vibration & Thermo-Hydrodynamic Obturation (VibraTHO), and its rationale with a series of cases.

SUMMARY

The VibraTHO technique was used to fill the root canals of three clinically challenging cases: A C-shaped mandibular molar with complex anatomy, a C-shaped mandibular molar with an infected root canal system and a periapical lesion that required retreatment, and apically bifurcating mesiobuccal canals with a common orifice in a maxillary second molar. The cases were followed up for 15, 7 and 37 months, respectively. After follow-up, normal periapical status was observed without any noticeable radiographic change in the root canal fillings in each case. Periapical radiographs revealed complete healing of the periapical area in cases with pre-operative periapical lesions.

Flowable Urethane Dimethacrylate-Based Filler for Root Canal Obturation in Primary Molars: A Pilot SEM and microCT Assessment

Pulpectomy in deciduous teeth involves endodontic access opening, root canal debridement and obturation with an appropriate filling material. EndoREZ (ER) is the urethane dimethacrylate-based filler, which can be used for root canal obturation in permanent and primary teeth. This observation aimed to evaluate the behavior of the ER as a filler in root canals of two primary molars after the physiological resorption process using the scanning electron microscopy (SEM) and micro-computed tomography (µCT) in second lower molars after their natural exfoliation. The SEM analysis revealed a non-uniform, porous and lacunary structure of ER, visually similar to the resorbed surface of the dentine. The µCT observations demonstrated the differences in the resorption level of the root and material surfaces. The preliminary observations suggest that ER is resorbed faster than root tissues and can therefore be a suitable material for the root canal filling in primary teeth. However, more investigations are needed to support these preliminary findings.

Micro-CT evaluation of filling of flattened root canals using a new premixed ready-to-use calcium silicate sealer by single-cone technique

The aim of this study was to evaluate the filling ability of a new premixed ready-to-use calcium silicate-based sealer, in comparison with an epoxy resin-based sealer by the single-cone technique in flattened root canals. Thirty-two flattened root canals of maxillary second premolars with buccal-lingual diameter 4 or more times larger than the mesio-distal diameter at 9 mm from the radiographic apex were selected. Root canals were prepared using Hyflex EDM 25/0.08 and additional preparation with ultrasonic tip Flatsonic and ProDesign Logic 25/0.03. After preparation, the root canals were filled with two root canal sealers (n = 16): Bio-C Sealer or AH Plus using the single-cone technique. Scanning was performed before and after root canal obturation using a Skycan 1176 micro-computed tomography (micro-CT) with an isotropic voxel size of 8.74 μm. The percentage of voids was analyzed in the cervical/middle thirds and in the apical third. Data were submitted to the Mann-Whitney test at a significance level of 5%. There was no statistical difference between Bio-C Sealer and AH Plus (p > .05). The percentage of voids in the cervical/middle thirds was 8.94% (1.33-39.95) for Bio-C Sealer and 9.30% (1.19-18.00) for AH Plus (p > .05). In the apical third, this percentage was 11.84% (4.85-27.00) for Bio-C Sealer and 9.21% (1.34-28.78) for AH Plus (p > .05). By using the single-cone technique, neither Bio-C Sealer nor AH Plus provided a voids-free root canal filling. Both sealers had similar filling ability in flattened root canals.

Mineral Trioxide Aggregate Applications in Endodontics: A Review

A current topic in dentistry concerns the biocompatibility of the materials, and in particular, conservative dentistry and endodontics ones. The mineral trioxide aggregate (MTA) is a dental material with biocompatibility properties to oral and dental tissues. MTA was developed for dental root repair in endodontic treatment and it is formulated from commercial Portland cement, combined with bismuth oxide powder for radiopacity. MTA is used for creating apical plugs during apexification, repairing root perforations during root canal therapy, treating internal root resorption, and pulp capping. The objective of this article is to investigate MTA features from a clinical point of view, even compared with other biomaterials. All the clinical data regarding this dental material will be evaluated in this review article. Data obtained from the analysis of the past 10 years' literature highlighted 19 articles in which the MTA clinical aspects could be recorded. The results obtained in this article are an important step to demonstrate the safety and predictability of oral rehabilitations with these biomaterials and to promote a line to improve their properties in the future.

MTT versus other cell viability assays to evaluate the biocompatibility of root canal filling materials: a systematic review

OBJECTIVES

This systematic review aimed to compare the cytotoxicity of root canal filling materials (RCFMs) assessed using tetrazolium salt-based tests (TSBT), including the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay, with those obtained using other cell viability assays.

METHODS

A search was performed on PubMed, Scopus, Web of Science and OpenGrey up to March 2019, followed by a manual search. According to the Participants, Exposure, Comparator and Outcomes (PECO) criteria, in vitro studies that evaluated the cytotoxic effect of RCFMss on animal and/or human cells through TSBT and at least one other viability assay were compared. The methodological quality of selected papers was assessed using ToxRTool^® and SciRAP^® . Data were analysed using Wilcoxon's signed-rank test for paired samples and linear weighting kappa.

RESULTS

A total of 230 non-duplicated records were identified. After applying the eligibility criteria, 55 studies were selected for methodological evaluation, seven were selected by manual searching, 22 were excluded for methodological reasons, and 40 were included. A total of 410 comparisons were performed between TSBT and distinct cell viability tests (DCVT). MTT had moderate concordance with DCVT using human cells (n = 138 samples) (P = 0.507; k = 0.4225) and animal cells (n = 122 samples) (P = 0.124; k = 0.5775). XTT had good concordance using human (n = 110 samples) (P = 0.507; k = 0.6336) and animal cells (n = 12 samples) (P = 0.564; k = 0.6604). MTT, XTT, WST and MTS assays showed moderate concordance with DCVT (n = 410 samples) (P = 0.375; k = 0.5138) and complete agreement in 226 samples.

DISCUSSION

The included studies had methodological heterogeneity that was minimized by the systematic review methodology.

CONCLUSIONS

MTT and XTT do not cause over- or underestimation of cell viability during cytotoxicity screening of root canal filling materials, implying that these assays can be considered reliable for this purpose. Nonetheless, the development of protocols for the cytotoxic screening of these materials on 3D tissue-like cultures aiming to improve their predictability in the clinical scenario is suggested.

Cone-beam Computed Tomographic-based Assessment of Filled C-shaped Canals: Artifact Expression of Cone-beam Computed Tomography as Opposed to Micro-computed Tomography and Nano-computed Tomography

INTRODUCTION

The present study investigated the assessment of root canal fillings in a series of cone-beam computed tomographic (CBCT) images obtained from endodontically treated mandibular molars with C-shaped canals.

METHODS

Clinically comparable high (HR) and normal (NR) resolution protocols were selected in 3D Accuitomo 170 (J Morita Corporation, Kyoto, Japan), NewTom VGi evo (Cefla QR Verona, Verona, Italy), ProMax 3D Max (Pro; Planmeca, Helsinki, Finland), and Pax-i3D Green Premium (Pax; Vatech, Gyeonggi, South Korea). Micro-computed tomographic and nano-computed tomographic images were considered as the reference standard. The set of images was evaluated according to beam hardening artifact patterns (dark streaks, hypodense areas, and volume distortion).

RESULTS

Regarding dark streaks, the Fleiss kappa test showed that Pax HR and NR and Pro HR images showed the highest artifact expression. Hypodense areas were detected in 100% and 99.1% of the images obtained using Pax HR and NR, respectively. Kappa tests showed highest distortion for images derived from the Pax and Pro CBCT devices. Root canal filling assessment was considered appropriate in 100% of the 3D Accuitomo 170 HR, NewTom VGi evo NR, micro-computed tomographic, and nano-computed tomographic images.

CONCLUSIONS

The present study confirms the large variability in CBCT-derived artifact expression. Highlighting the increased artifact expression for particular CBCT systems, it may be concluded that for diagnosis of endodontically filled molars with C-shaped canals, the choice of CBCT unit and protocol is essential.

Cytotoxic Effect of Niobium Phosphate Glass-based Gutta-Percha Points on Periodontal Ligament Fibroblasts In Vitro

INTRODUCTION

The outcome of root canal obturation might be affected by the chemical components of the chosen filling materials. Niobium phosphate glass-based gutta-percha (GNB) was proposed as a biomaterial-based obturation point. This study aimed to investigate the cytotoxic and cell modulation effects of GNB points on human periodontal ligament fibroblasts (PDLFs) in vitro.

METHODS

Human PDLFs were cultured for the assays. Extracts of regular gutta-percha (GP) points and GNB were obtained, serially diluted (1:5, 1:10, and 1:25), and used to stimulate PDLFs. A cell viability assay was performed using alamarBlue reagent (Molecular Probes, Waltham, MA), and reverse transcription quantitative polymerase chain reaction was used to assess the gene expression for collagen type I and cementum protein 1. One-way analysis of variance followed by the Tukey post hoc test was performed (P < .05).

RESULTS

Regular GP reduced cell viability only in pure extracts, whereas GNB exhibited cytotoxicity to PDLFs in pure extracts as well as 1/5 and 1/10 dilutions. The gene expression of collagen type I was down-regulated only in the GNB group (P < .05). The expression of cementum protein 1 remained unaltered by both tested materials.

CONCLUSIONS

The addition of niobium phosphate glass to GP points increased cytotoxicity, affecting PDLF viability and partially disturbing physiological cell function.

Effect of Ultrasonic Activation of Endodontic Sealers on Intratubular Penetration and Bond Strength to Root Dentin

INTRODUCTION

This study aimed to evaluate the effect of ultrasonic activation (UA) of endodontic sealers on dentin tubule penetration and the bond strength to root dentin.

METHOD

One hundred single-rooted teeth were prepared with 40.06 nickel-titanium instruments and divided into 2 groups: with or without UA. Three resin-based sealers (MTA Fillapex [Angelus Dental Solutions, Londrina, PR, Brazil], Sealer Plus [MK Life Medical and Dental Products, Porto Alegre, RS, Brazil], and AH Plus [Dentsply, DeTrey GmbH, Konstanz, Germany]; n = 20) and 2 calcium silicate-based sealers (Sealer Plus BC [MK Life Medical and Dental Products] and EndoSequence BC [Brasseler, Savannah, GA], n = 20) were used and subdivided (n = 10) according to the protocols. Fluo-3 (Thermo Fisher Scientific, Waltham, MA) and rhodamine B dyes were added to the calcium silicate- and resin-based sealers, respectively. In the UA groups, the activation was performed for 40 seconds followed by lateral compaction. Samples were transversely sectioned to evaluate the dentin tubule penetration and the bond strength to root dentin. The penetration data were analyzed with the Student t test, 1-factor analysis of variance, and Bonferroni tests. Bond strength was evaluated using the Student t test, Kruskal-Wallis, and Dunn post hoc test.

RESULTS

Resin-based sealers showed the highest tubule penetration without UA (P < .05). UA significantly enhanced MTA Fillapex and Endosequence BC dentin tubule penetration (P < .05). AH Plus and Sealer Plus BC improved their bond strength to root dentin after UA (P < .05). AH Plus/UA, Sealer Plus/UA, and Sealer Plus BC/UA presented the highest bond strength values (P < .05). Adhesive failures were predominant in all groups regardless of the use of ultrasound.

CONCLUSIONS

UA interferes with tubule penetration and the bond strength to root dentin of resin- and calcium silicate-based sealers.

Imaging of root canal treatment using ultra high field 9.4T UTE-MRI - a preliminary study

OBJECTIVES

To investigate the potential of 9.4T ultrashort echo time (UTE) technology visualizing tooth anatomy and root canal treatment in vitro. In particular, it was evaluated whether the currently achievable resolution is suited presenting all anatomical structures and whether the root canal filling materials are distinguishable in UTE-MRI.

METHODS

Four extracted human teeth were examined using 9.4T UTE-MRI prior endodontic treatment (native teeth), after preparation and after obturation procedure. Root canal obturation was performed using warm vertical compaction (Schilder technique) with an epoxy-resin-based sealer. A single gutta-percha cone measured by MRI served as intensity-reference. MRI results were validated with corresponding histologic sections of the teeth. In addition, all teeth were examined at the different stages with CBCT and conventional X-ray.

RESULTS

9.4T UTE-MRI enabled a precise visualization of root canal anatomy of all teeth at a resolution of 66 µm. After obturation, dentin, sealer and gutta-percha cones showed distinct MRI signal changes that allowed clear differentiation of the obturation materials from surrounding tooth structure. The filling materials, isthmal root canal connections and even dentin-cracks that were identified in the MR-images could be verified in histological sections.

CONCLUSIONS

9.4T UTE-MRI is suitable for visualization of root canal anatomy, the evaluation of root canal preparation and obturation with a high spatial resolution and may provide a versatile tool for dental material research in endodontics.

Effect of a chitosan final rinse on the bond strength of root canal fillings

This study was designed to evaluate the effect of a final rinse with 0.2% chitosan solution on the adhesion in roots filled with gutta percha and an epoxy resin based sealer. Thirty extracted human maxillary canines selected to ensure specimen standardization were used in the study. After the coronal portion of each tooth was removed, the roots were instrumented and irrigated with 1% sodium hypochlorite (NaOCl). Roots were distributed into 3 groups according to the final rinsing solution (n = 10): 0.2% chitosan, 17% ethylenediaminetetraacetic acid (EDTA), or 1% NaOCl. The canals were irrigated with 5 mL of each solution for 5 minutes and then filled with gutta percha cones and the resin based sealer. Ten roots in each group were prepared, sectioned, and submitted to push-out testing. Data were analyzed with analysis of variance and Tukey test (P < 0.05). In the push-out test, final irrigation with chitosan (mean, 0.37 [SD, 0.12] MPa) or EDTA (0.38 [0.11] MPa) resulted in significantly greater bond strength of the sealer to the root canal (P < 0.05) than did irrigation with 1% NaOCl (0.13 [0.04] MPa). The cervical third had greater bond strength than the other thirds (P < 0.05). Adhesive failure was the most frequent type in all groups. A final rinse with 0.2% chitosan or 17% EDTA resulted in greater bond strength of root fillings to the root canal than did 1% NaOCl.

Computed microtomography study of untreated, shaped and filled mesiobuccal canals of maxillary first molars

This study assessed the effectiveness of modern endodontic shaping and filling procedures on mesiobuccal roots of maxillary molars with two canals. The canals of 20 mesiobuccal roots were treated with Mtwo rotary files, passive ultrasonic irrigation and Guttafusion obturators. X-ray computed microtomography analysis was carried out prior to treatment, after canal shaping and after canal filling to determine the alterations of the canal volume before and after the instrumentation, the volume of the hard tissue debris, and percentage of the volume occupied by filling materials. The shaping instruments and filling materials reached only partially the endodontic space of the second mesiobuccal canal and the accessory endodontic structures. Canal irregularities, ramifications, and interconnections were accumulation sites of hard tissue debris. This study demonstrated that rotary files, passive ultrasonic irrigation and carrier-based filling systems could be partially effective for the treatment of the mesiobuccal canals and their accessory endodontic structures.

Retreatability of root canals obturated using mineral trioxide aggregate-based and two resin-based sealers

Background

The aim of this study was to compare the retreatment time and the removal efficiency of different root canal sealers using WaveOne Gold reciproc file system by measuring required time.

Materials and Methods

Forty-five mandibular premolars were prepared and randomly divided into three groups (n = 15). In Groups 1-3, the canals were filled with gutta-percha and mineral trioxide aggregate (MTA) Fillapex, EndoREZ, and AH26, respectively. After 7 days, root canal filling materials (RCFM) were removed with WaveOne Gold reciproc files by measuring time. Teeth were grooved and sectioned longitudinally, then remaining RCFM was evaluated using digital camera. The images were transferred to image analysis software to measure the areas of remaining RCFM. Data were analyzed using one-way analysis of variance and Tukey's test (α = 0.05).

Results

There was a statistically significant difference between groups according to time required for removing RCFM (P < 0.05). The time required for removing RCFM was significantly shorter in Group 1 and longer in Group 3 than the other groups (P < 0.05). In Group 1, the remaining RCFM was more than other groups at middle third (P < 0.05), but there was no statistically significant difference between groups at coronal and apical thirds (P > 0.05).

Conclusions

None of the sealers evaluated in this study could completely be removed from the root canals. MTA-based sealer was removed faster than resin-based sealers.

[Difficulties and misunderstandings of root canal filling]

Root canal filling is performed as the final and most important procedure of root canal treatment. The superior 3D filling is the key determinant of endodontic success. However, such procedure remains a challenge because of the complexity of the root canal system and the limitation of root canal filling materials and methods. This paper provides an overview of current principles and practices in root canal filling, focusing on advantages, disadvantages and indications. The process errors and countermeasures in various root canal filling methods are also discussed. This review provides guidance and help for clinical and practice to achieve a satisfactory root canal filling and improve root canal treatment outcome.

Histologic evaluation of the effect of mineral trioxide aggregate-Fillapex as a root canal sealer in rat teeth submitted to late replantation

OBJECTIVE

This study aims to analyze the effect of new root canal based silicate cement, in rat teeth after late replantation, comparing with calcium hydroxide (CH) in preventing tooth root resorption.

MATERIALS AND METHODS

The study group included 16 Wistar rats in which the upper right central incisors were extracted and were left on a worktable for 60 min, simulating a case of tooth avulsion, after had been anesthetized. One group, (Group I), the canals were filled with CH past, before replantation. The second groups of teeth, (Group II), the canals were filled with mineral trioxide aggregate-Fillapex (MTAF). After removal, the blood clot of the socket, with saline solution irrigation, the teeth were replanted into their original socket, and splinted with silk 3/0. The rats were sacrificed 8 weeks after replantation and the specimens were prepared for histologic and histomorphometric analyses. The areas of inflammatory and replacement resorptions were selected and quantified. These data for each group of teeth were evaluated and analyzed using the Mann-Whitney test (P = 0.05).

RESULT AND CONCLUSION

All the replanted teeth in both groups survived. Although root canal filled with MTAF provide better results than with CH past concerning inflammatory and replacement resorption, there was no statistical difference (P = 0.527).

Root Canal Filling after Revascularization/Revitalization

INTRODUCTION

Revascularization/revitalization therapy is considered an alternative procedure for management of teeth with an immature apex and necrotic pulp, mainly when root development is interrupted in the early phases of formation. However, this clinical treatment protocol should be considered a permanent procedure?

METHOD

A maxillary central incisor with a previous and successful RR treatment was intentionally filled with a biocompatible material with the periapical tissues due to the patient's lack of adherence to the follow-up protocol.

RESULTS

The 20-month follow-up showed absence of clinical, radiological and tomographic signs and symptoms of an endodontic re-infection.

CONCLUSION

This case demonstrates that once the increased thickening of the canal walls, incrementing the root length, apical closure and the total resolution of the apical lesion are observed, the main canal of a previously treated tooth with an RR procedure can be filled.

Micro-CT assessment of dentinal micro-cracks after root canal filling procedures

AIM

To evaluate the frequency of dentinal micro-cracks after root canal filling procedures with GuttaCore (GC), cold lateral compaction (CLC) and warm vertical compaction (WVC) techniques in mandibular molars using micro-computed tomographic analysis.

METHODOLOGY

Thirty mesial roots of mandibular molars, with a type II Vertucci's canal configuration, were prepared to working length with a Reciproc R40 instrument and randomly assigned to one of the three experimental groups (n = 10), according to the technique used for root filling: GC, CLC or WVC. The GC group was filled with a size 40 GC obturator, whilst CLC and WVC groups used conventional gutta-percha cones. AH Plus sealer was used in all groups. The specimens were scanned at an isotropic resolution of 14.25 μm before and after root canal preparation and after root filling. Then, all pre- and postoperative cross-sectional images of the roots (n = 41 660) were screened to identify the presence of dentinal defects.

RESULTS

Overall, 30.75% (n = 12 810) of the pre- + post-filling images displayed dentinal defects. In the GC, CLC and WVC groups, dentinal micro-cracks were observed in 18.68% (n = 2510), 15.99% (n = 2389) and 11.34% (n = 1506) of the cross-sectional images, respectively. All micro-cracks identified in the post-filling scans were also observed in the corresponding post-preparation images.

CONCLUSION

Root fillings in all techniques did not induce the development of new dentinal micro-cracks.

[Cause and regulation of pain during root canal therapy]

In stomatology, root canal therapy is a commonly used and effective treatment for dental pulp diseases and periapical diseases. However, pain may occur during or after treatment and may severely affect patients. This article aimed to analyze the mechanism and cause of pain during root canal therapy, which may reduce or relieve pain.

Effect of photon induced photoacoustic streaming (PIPS) on bond strength to dentine of two root canal filling materials

OBJECTIVES

The aim of this study was to evaluate the effect of photon induced photoacoustic streaming (PIPS) technique in combination with EDTA on bond strength of gutta-percha/AH Plus and Resilon/RealSeal SE root canal fillings to root dentine.

MATERIALS AND METHODS

Forty freshly extracted human maxillary anterior teeth with intact straight roots, were instrumented endodontically with rotating ProTaper instruments and randomly divided into two experimental groups. In group 1 (n = 20), root canals were rinsed for 1 minute with 2 ml of 17% EDTA. In group 2 (n = 20), Er:YAG laser, with a 14 mm long 400 μ diameter tapered PIPS tip, was used for 1 minute with 2 ml of 17% EDTA. The laser parameters used were: 20 mJ per pulse, 15 Hz, 50 microsecond. In each experimental group, half of the root canals (n = 10) were obturated with gutta-percha/AH Plus and other half (n = 10) with Resilon/RealSeal SE. A micropush-out test was performed on sectiond specimens of the filled roots using a universal testing machine and resistance to failure plus failure modes were determined.

RESULTS

Both gutta-percha/AH Plus groups had higher bond strength to root dentin than the Resilon/RealSeal SE groups (P < 0.05). The smear layer removal protocol, with EDTA only or combining PIPS technique with EDTA, had no influence on bond strength of either gutta-percha/AH Plus, or Resilon/RealSeal SE (P > 0.05).

CONCLUSION

Within the limitations of this study, it was found that the application of the PIPS technique did not have an affect on the push-out bond strength of Resilon/RealSeal SE root canal filling to dentin nor on the gutta-percha/AH Plus. A significant difference in bond strength was noted between the two root canal filling materials. Lasers Surg. Med. 48:951-954, 2016. © 2016 Wiley Periodicals, Inc.

Ability of Three Endodontic Sealers to Fill the Root Canal System in Association with Gutta-Percha

Introduction:

The present study compared the ability of the endodontic sealers AH Plus, Pulp Canal Sealer and EndoREZ to fill the root canal system in association with gutta-percha.

Methods:

Ninety mandibular premolars were accessed, prepared and divided into three groups of 30 teeth each, according to the sealer used to fill the canals: AH Plus, Pulp Canal Sealer and EndoREZ. All the teeth were filled using the continuous wave of condensation technique. The specimens were then decalcified, dehydrated, rendered transparent, and analyzed by three independent evaluators with 8x magnification. Chi-squared test (χ², p < 0.05) was used to compare the groups in relation to the totally filled, the partially filled and the non filled ramifications. The same test was used to compare the directions of filled ramifications and the number of ramifications among the three thirds of the roots.

Results:

EndoREZ filled a significantly higher number of ramifications than AH Plus and Pulp Canal Sealer (χ², p < 0.05). All the groups showed higher number of totally filled ramifications than partially filled and unfilled ramifications. The ramifications were more frequently detected in the apical third, followed by medium and coronal thirds, respectively (χ², p < 0.05). The ramifications were more frequently detected towards lingual direction (χ², p < 0.05).

Conclusion:

EndoREZ presented higher ability to fill the root canal system in association with gutta-percha when compared to AH Plus and Pulp Canal Sealer. The ramifications were more frequently detected in the apical third, running in a lingual direction.

Efficacy of Different Nickel-Titanium Instruments in Removing Gutta-percha during Root Canal Retreatment

INTRODUCTION

The aim of this study was to compare the cleanliness of root canal walls after retreatment using ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland), Twisted File Adaptive (TFA; Axis/SybronEndo, Orange, CA), Reciproc (PRC; VDW, Munich, Germany), and ProTaper Universal retreatment (PTR, Dentsply Maillefer) nickel-titanium systems and the time required for gutta-percha and sealer removal.

METHODS

Eighty human maxillary central incisors with single and straight root canals were instrumented up to #40.02 with manual K-files (Dentsply Maillefer) and obturated using the continuous wave of condensation technique. Removal of the gutta-percha and sealer was performed using 1 of the following nickel-titanium systems: PTN, TFA, RPC, or PTR. The teeth were sectioned, and digital images were captured. The photographs were analyzed using AutoCAD software (Autodesk, San Rafael, CA). Also, the total time required for gutta-percha removal was calculated by a chronometer.

RESULTS

The total retreatment time was significantly shorter in the PTR group compared with the other groups (P < .05). There was a significant difference between the groups according to the total residual gutta-percha and sealer (P < .05). The PTN and PTR groups left significantly less gutta-percha and sealer remnant than the TFA and RPC groups (P < .05).

CONCLUSIONS

Within the limitations of this study, the PTN and the PTR groups showed less residual gutta-percha and sealer than the TFA and RPC groups. The time required for gutta-percha and sealer removal was similar for all the groups, except for the PTR group.

The influence of three endodontic sealers on bone healing: an experimental study

BACKGROUND

The aim of this experimental study is to assess the bone healing phenomenon produced in the presence of 3 dental materials used for the root canal obturation.

MATERIALS AND METHODS

The biocompatibility of 3 endodontic sealers (a self-curing epoxy resin - AH Plus, a dual cure urethane dimethacrylate resin - RealSeal and a new dual cure endodontic hydroxyapatite based filling material) was investigated after intra-osseous implantation of the materials in rats' calvaria. Tissue reaction was studied at 2, 4, 6, 8, 10 and 12 weeks after implantation using calibrated image retrieval by Olympus. We took into consideration the presence of inflammatory cells (polymorphonuclear leukocytes, macrophages, plasma cells, lymphocytes and giant cells) and classified the aspects of the histological samples according to the following scale: 0 - no inflammation, 1 - mild, isolated inflammation, 2 - moderate, localised inflammatory reaction, 3 - severe, diffuse and intense inflammatory reaction.

RESULTS

The inflammatory reaction was present at the 6 intervals for all the tested materials, but a decrease of the inflammatory infiltrate, statistically significant, until extinction for all tested materials was observed at the end of the experimental period. The reaction of bone tissue recovery was most intense in the case of the control area. Lower intensity osteogenesis phenomenon was observed in case of all 3 tested sealers at the end of the experimental period.

CONCLUSIONS

Biocompatibility and bone healing induction of the new hydroxyapatite based endodontic filling material is comparable to other commercial materials, AH Plus and RealSeal.

Iatrogenic Damage to the Periodontium Caused by Endodontic Treatment Procedures: An Overview

The tooth, the pulp tissue within it and its supporting structures should be viewed as one biologic unit. The interrelationship of these structures influences each other during health, function and disease. The interrelationship between periodontal and endodontic diseases has aroused much speculation, confusion and controversy. The endodontium and periodontiumare closely related and disease or damage of one tissue may lead to the involvement of the other.

Impact of the quality of coronal restoration and root canal filling on the periapical health in adult syrian subpopulation

Background:

The purpose of this study was to determine the status of periapical tissues of endodontically treated teeth according to coronal restorations and root canal fillings separately and in concomitant in adult Syrian subpopulation.

Methods:

784 endodontically treated teeth from two hundred randomly selected Syrian adult patients were radiographically evaluated. According to predetermined criteria, the quality of coronal restorations and root canal filling of each tooth was scored as adequate or inadequate. The status of periapical tissues was also classified as healthy or diseased. Results were analyzed using Chi-squared test.

Results:

Adequate coronal restorations were determined in 58.54% of cases which was accompanied with less periapical pathosis than that in teeth with inadequate restorations (P < 0.01). 14% of teeth were restored by posts which showed no significant impact on the periapical tissues health. 18.5% of endodontic treatments were evaluated as adequate with less number of periapical radiolucencies than that of inadequate root canal fillings (P < 0.01). Absence of periapical pathosis was 96.6% in cases with both adequate coronal restorations and root canals fillings. The rate was 88.5% in cases with only adequate root canals fillings, and about 70% in cases with only adequate coronal restorations. When the treatment was inadequate in both coronal and root canals fillings, success rate was only observed in 48.8%.

Conclusion:

The most important factor with regard to the periradicular tissue health is the quality of root canal filling without neglecting the influence of coronal restoration (regardless of its type). There is a high prevalence rate of periapical pathosis in Syrian subpopulation due to poor dental practice.

A microcomputed tomography-based comparison of root canal filling quality following different instrumentation and obturation techniques

OBJECTIVE

With a microcomputed tomography (microCT) imaging device, we aimed to quantitatively evaluate root canal fillings after commonly used endodontic procedures and also tested the suitability of microCT for this purpose.

MATERIALS AND METHODS

Eighty single roots were instrumented and obturated with gutta-percha and Tubli-Seal. They were divided into 4 groups of 20. The Hand groups were instrumented with hand files and filled with thermoplastic (Th) compaction and cold lateral (CL) condensation, i.e. Hand-Th and Hand-CL, respectively. The Rot groups, i.e. Rot-Th and Rot-CL, were instrumented with a rotary ProFile system and filled as above. The roots were scanned and 3-dimensional (3D) visualization was obtained. The number, size, percentage of volume and distribution of voids at the filling/dentine interface (i-voids) and voids surrounded by filling material (s-voids) were measured.

RESULTS

Canal fillings differed significantly with regard to the size of both types of voids and the average number of i-voids. All canals presented a low volume of voids. The highest percentage (0.69%) was found for i-voids in the Hand-CL group, while the lowest volume (0.11% for s-voids and 0.14% for i-voids) was in the Hand-Th canals. Apically, in the last 3 mm, i-voids were observed mainly in the Th groups, and s-voids occurred mostly in the coronal part of the canal filling in all cases.

CONCLUSION

MicroCT was a useful tool for 3D quantitative evaluations of these root canal fillings. None of the root canal instrumentation and filling methods ensured void-free obturation. CL condensation produced mainly i-voids. With Th compaction, internal s-voids were particularly common, but there were mainly i-voids in the apical part.

Effects of root canal preparation, various filling techniques and retreatment after filling on vertical root fracture and crack formation

AIM

To investigate the incidence of cracks in root dentin after rotary instrumentation and filling with cold lateral condensation (CL), single-cone obturation (SC), and warm vertical compaction (WV) and retreatment of each filling system.

METHODOLOGY

One-hundred sixty mandibular incisors were selected. Twenty teeth were left unprepared and served as a control, and the remaining 140 teeth were instrumented. Twenty teeth were assigned to an only prepared group. The remaining 120 teeth were assigned to three root canal filling groups and three retreatment groups (n = 20), as follows: CL, WV, SC, and retreatment of each filling system. All the roots were sectioned perpendicular to the long axis at 2, 4, 6, and 8 mm from the apex, and the sections were then observed under a stereomicroscope. The absence/presence of cracks and vertical root fractures were recorded, and the data were analyzed with a Pearson's chi-square test (P = 0.05).

RESULTS

No complete vertical root fractures were observed in the unprepared and only prepared groups. However, vertical fractures were observed in the filling and retreatment groups. There were significantly more cracks in the retreatment after WV group than the other groups, with the exception of the retreatment after SC, WV, and CL resulted in significantly more cracks than the only prepared and SC.

CONCLUSIONS

The filling techniques (except SC) caused more cracks than preparation only. The SC caused fewer cracks compared to the other filling techniques. The retreatment following the different filling techniques (except CL) caused more cracks than the original fillings.

Bacterial leakage in root canals filled with AH Plus and dentine bonding agents

OBJECTIVE

The aim of this study was to compare the efficacy of different dentine adhesives in delaying the coronal bacterial leakage of Enterococcus faecalis in filled root canals. Materials and methods. Ninety-five lower incisors of patients >65 years of age were instrumented using the ProTaper system and were irrigated with 1 mL of 2.5% sodium hypochlorite (NaOCl) alternated with 1 mL 17% EDTA between each file change. Final irrigation was performed with 5 mL of 17% EDTA and then flushed with 5 mL of distilled water. The teeth were randomly divided into five experimental groups (n = 15/group) and one of the following dentine adhesives was applied: (1) AdheSE; (2) Excite DSC; (3) Clearfil Protect Bond; (4) One Coat 7.0; or (5) Control group without adhesive. After filling the root canals, the samples were mounted on a double chamber device to evaluate the bacterial filtration of E. faecalis during a period of 240 days. The results underwent non-parametric Kaplan-Meier survival analysis and comparisons among groups were done using the Log-Rank test.

RESULTS

At 240 days, E. faecalis was detected in samples of all groups in the lower chamber. The highest survival value was obtained by One Coat 7.0, giving statistically significant differences from the other groups, whereas Clearfil Protect Bond, AdheSE and Excite DSC showed similar behaviours, likewise similar to the Control group.

CONCLUSIONS

One Coat 7.0 adhesive system provides the longest survival value to delay E. faecalis coronal leakage in filled root canals.

Periradicular lesions in HIV-infected patients attending the faculty of dentistry: clinical findings, socio-demographics status, habits and laboratory data - seeking an association

OBJECTIVE

The purpose of this study was to estimate the prevalence of periradicular lesions in HIV-infected Brazilian patients and to assess the correlation of several factors with the periradicular status.

METHOD

One hundred full-mouth periapical radiographs were evaluated. A total of 2,214 teeth were evaluated for the presence of periradicular lesions, caries lesions, coronal restorations, pulp cavity exposure and endodontic treatment.

RESULTS

The prevalence of periradicular lesions was 46%. There were no significant differences between individuals with or without periradicular lesions with respect to their socio-demographic status, habits, laboratory data and route of HIV infection. However, the presence of a periradicular lesion was statistically correlated with the number of teeth with endodontic treatment (p = 0.018), inadequate endodontic treatment (p = 0.025), images suggesting pulp cavity exposure (p = 0.002) and caries lesions (p = 0.001).

CONCLUSIONS

The prevalence of periradicular lesions in HIV-infected individuals was 46% and was not related to HIV infection.

Periapical inflammation subsequent to coronal inoculation of dog teeth root filled with resilon/epiphany in 1 or 2 treatment sessions with chlorhexidine medication

INTRODUCTION

Therapeutic methods that inhibit microbial ingress into filled root canals are desirable. This in vivo study assessed the inhibition of periapical inflammation subsequent to coronal inoculation in canals medicated with 2% chlorhexidine gel and filled with Resilon/Epiphany (Pentron Clinical Technologies, Wallingford, CT).

METHODS

Six Beagle dogs each had 10 two-rooted premolars treated. In group 1 (n = 36 roots), 1 root/tooth had the canal conditioned with Primer Epiphany, filled with Epiphany sealer and Resilon core in 1 session, and coronally sealed with PhotacFil. In group 2 (n = 36 roots), the second root/tooth had the canal medicated with 2% chlorhexidine gel for 1 week and then filled and coronally sealed as in group 1. After 3 weeks, canals were exposed to the oral environment for 7 days, inoculated with isologous plaque, and coronally sealed. Negative controls treated as groups 1 and 2 remained sealed. Positive controls had canals unfilled and exposed. Seven months after inoculation, dogs were euthanized; jaw blocks processed for histologic examination; and periapical inflammation (PI) recorded as none, mild, or severe.

RESULTS

In groups 1 and 2, severe PI occurred in 5 of 65 roots (8%) and mild PI in 18 of 65 roots (28%) with a significantly higher (P = .031) PI incidence in group 2 than in group 1. Negative controls had only mild PI in 9 of 29 roots (31%). Roots medicated with 2% chlorhexidine gel had mild PI significantly more (P = .009) than roots filled in 1 session (more than 2-fold).

CONCLUSIONS

Intracanal medication with 2% chlorhexidine gel and root filling with Resilon/Epiphany did not effectively inhibit apical periodontitis subsequent to coronal inoculation.