Functionalization of Siloxanes with Arynes Generated from o-Triazenylarylboronic Acids

Herein, we report the functionalization of polyhedral oligosilsesquioxanes (POSS) and related siloxanes with arynes. Using o-triazenylarylboronic acids as aryne precursors and silica gel as the activator, the transformation of siloxane bearing various arynophilic moieties on the side chains was achieved with high yields without touching the siloxane core. This method was applied to the conjugation of POSS and pharmaceutical cores using an aryne derived from the synthetic intermediate of cabozantinib. Furthermore, orthogonal dual functionalization of POSS was realized by combining the aryne reaction with Huisgen cyclization.

Preparation and Performance of H-PDMS/PMHS/OTS Hybrid Nanosilica Hydrophobic and Self-Cleaning Coatings on Phosphogypsum Surface

Hemihydrate phosphogypsum, an industrial solid waste product of phosphoric acid production, is abundant and inexpensive. If the problem of poor water resistance is solved, this material could be substituted for cement and other traditional energy-consuming cementitious materials in the construction industry. This approach would confer important economic and environmental benefits while promoting the resource utilization of phosphogypsum (PG). In this study, hydrophobic and self-cleaning coatings of H-PDMS/PMHS/OTS hybrid nanosilica were prepared on a post-hydroxylated PG surface using sol-gel and impregnation methods. The water contact angle, Fourier-transform infrared spectroscopy, Three-dimensional surface morphology and roughness analysis, X-ray photoelectron spectroscopy, scanning electron microscopy, surface abrasion tests, and tape adhesion tests were used to evaluate the hydrophobicity of the coatings. The results demonstrated that the in situ reaction produced a hydrophobic siloxane/nanosilica hybrid network that bonded to the PG surface via hydrogen bonding, making the otherwise completely hydrophilic PG hydrophobic (PGH-3, contact angle (CA) = 144.1°). The PGH-3 sample exhibited excellent chemical stability, maintaining a contact angle greater than 135° under strongly acidic or alkaline conditions. The contact angle remained at 123.7° after 50 tape-bonding tests. After 100 wear cycles, the contact angle remained at 121.9°. This study presents an environmentally friendly method and a straightforward application procedure to impart hydrophobicity to solid waste PG. Its potential is thus demonstrated in the field of PG-based construction materials and the comprehensive utilization of solid waste.

Sorption Capacity of Polydimethylsiloxane Foams Filled with Thermal-Treated Bentonite-Polydimethylsiloxane Composite Foams for Oil Spill Remediation

The spillage of oil causes severe and long-lasting impacts on both the environment and human life. It is crucial to carefully reconsider the methods and techniques currently employed to recover spilled oil in order to prevent any possible secondary pollution and save time. Therefore, the techniques used to recover spilled oil should be readily available, highly responsive, cost-effective, environmentally safe, and, last but not least, they should have a high sorption capacity. The use of sorbents obtained from natural materials is considered a suitable approach for dealing with oil spills because of their exceptional physical characteristics that support sustainable environmental protection strategies. This article presents a novel sorbent material, which is a composite siloxane foam filled with bentonite clay, aimed at enhancing the hydrophobic and oleophilic behavior of the material. The thermal treatment of bentonite optimizes its sorption capacity by eliminating water, and increasing the surface area, and, consequently, its interaction with oils. In particular, the maximum sorption capacity is observed in kerosene and naphtha for the bentonite clay thermally treated at 600 °C, showing an uptake at saturation of 496.8% and 520.1%, respectively. Additionally, the reusability of the composite foam is evaluated by squeezing it after reaching its saturation point to determine its sorption capacity and reusability.

Hybrid Ligand Polymerization for Weakly Confined Lead Halide Perovskite Quantum Dots

Rational ligand passivation is essential to achieve a higher performance of weakly confined lead halide perovskite quantum dots (PQDs) via a mechanism of surface chemistry and/or microstrain. In situ passivation with 3-mercaptopropyltrimethoxysilane (MPTMS) produces CsPbBr₃ PQDs with an enhanced photoluminescence quantum yield (PLQY, Φ_PL) of up to 99%; meanwhile, charge transport of the PQD film can be enhanced by one order of magnitude. Herein, we examine the effect of the molecular structure of MPTMS as the ligand exchange agent in comparison to octanethiol. Both thiol ligands promote crystal growth of PQDs, inhibit nonradiative recombination, and cause blue-shifted PL, while the silane moiety of MPTMS manipulates surface chemistry and outperforms owing to its unique cross-linking chemistry characterized by FTIR vibrations at 908 and 1641 cm^-1. Emergence of the diagnostic vibrations is ascribed to hybrid ligand polymerization arising from the silyl tail group that confers the advantages of narrower size dispersion, lower shell thickness, more static surface binding, and higher moisture resistance. In contrast, the superior electrical property of the thiol-passivated PQDs is mostly determined by the covalent S-Pb bonding on the interface.

Novel Siloxane Derivatives as Membrane Precursors for Lactate Oxidase Immobilization

We report new enzyme-containing siloxane membranes for biosensor elaboration. Lactate oxidase immobilization from water-organic mixtures with a high concentration of organic solvent (90%) leads to advanced lactate biosensors. The use of the new alkoxysilane monomers-(3-aminopropyl)trimethoxysilane (APTMS) and trimethoxy[3-(methylamino)propyl]silane (MAPS)-as the base for enzyme-containing membrane construction resulted in a biosensor with up to a two times higher sensitivity (0.5 A·M^-1·cm^-2) compared to the biosensor based on (3-aminopropyl)triethoxysilane (APTES) we reported previously. The validity of the elaborated lactate biosensor for blood serum analysis was shown using standard human serum samples. The developed lactate biosensors were validated through analysis of human blood serum.

Enhanced Tensile Properties, Biostability, and Biocompatibility of Siloxane-Cross-Linked Polyurethane Containing Ordered Hard Segments for Durable Implant Application

This work developed a series of siloxane-modified polyurethane (PU-Si) containing ordered hard segments by a facile method. The polyaddition between poly(ε-caprolactone) and excess diurethane diisocyanate was carried out to synthesize a polyurethane prepolymer with terminal isocyanate groups, which was then end-capped by 3-aminopropyl triethoxysilane to produce alkoxysilane-terminated polyurethane; the target products of PU-Si were obtained with hydrolysis and the condensation of alkoxysilane groups. The chemical structures were confirmed by FT-IR and XPS, and the effect of the siloxane content or cross-linked degree on the physicochemical properties of the PU-Si films was investigated in detail. The formation of the network structure linked by Si-O-Si bonds and interchain denser hydrogen bonds endowed PU-Si films with fine phase compatibility, low crystallinity, high thermal stability, and excellent tensile properties. Due to the high cross-linked degree and low interfacial energy, the films displayed a high surface water contact angle and low equilibrium water absorption, which resulted in slow hydrolytic degradation rates. Furthermore, the evaluation of protein adsorption and platelet adhesion on the PU-Si film surface presented high resistance to biofouling, indicating superior surface biocompatibility. Consequently, the siloxane-cross-linked polyurethane, which possessed excellent tensile properties, high biostability, and superior biocompatibility, showed great potential to be explored as biomaterials for durable implants.

Small-Molecule Electron Transport Layer with Siloxane-Functionalized Side Chains for Nonfullerene Organic Solar Cells

Active layer materials with silicone side chains have been broadly reported to have excellent long-term stability in harsh environments. However, the application of conjugated materials with silicone side chains in electron transport layers (ETLs) has rarely been reported. In this research, we synthesized for the first time a siloxane-modified perylene-diimide derivative (PDI-OSi) consisting of a side-chain substituent of siloxane and a conjugated group of perylene-diimide (PDI). The inserted siloxane functional groups not only can strengthen the light transmittance of PDI-OSi but also can remarkably expand its solubility and improve the film-forming ability and air stability of the material. Second, introducing siloxane-containing side chains can dramatically lower the work function and interfacial barrier of the electrode, thereby achieving a favorable ohmic contact. In addition, the moderate surface energy of siloxane functional groups makes PDI-OSi hydrophobic, which is conducive to forming excellent miscibility with hydrophobic active layers to promote charge transfer. When PDI-OSi is used as an ETL in organic solar cells (OSCs), operative exciton dissociation and more favorable surface morphology enable OSCs to realize a power conversion efficiency (PCE) of 13.99%. These results indicate that side-chain engineering with siloxane pendants is a facile strategy for constructing efficient OSCs.

Reactivity of Waterlogged Archeological Elm Wood with Organosilicon Compounds Applied as Wood Consolidants: 2D 1H-13C Solution-State NMR Studies

Some organosilicon compounds, including alkoxysilanes and siloxanes, proved effective in stabilizing the dimensions of waterlogged archaeological wood during drying, which is essential in the conservation process of ancient artifacts. However, it was difficult to determine a strong correlation between the wood stabilizing effect and the properties of organosilicon compounds, such as molecular weight and size, weight percent gain, and the presence of other potentially reactive groups. Therefore, to better understand the mechanism behind the stabilization effectiveness, the reactivity of organosilicons with wood polymers was studied using a 2D ¹H–¹³C solution-state NMR technique. The results showed an extensive modification of lignin through its demethoxylation and decarbonylation and also the absence of the native cellulose anomeric peak in siloxane-treated wood. The most substantial reactivity between wood polymers and organosilicon was observed with the (3-mercaptopropyl)trimethoxysilane treatment, showing complete removal of lignin side chains, the lowest syringyl/guaiacyl ratio, depolymerization of cellulose and xylan, and reactivity with the C6 primary hydroxyls in cellulose. This may explain the outstanding stabilizing effectiveness of this silane and supports the conclusion that extensive chemical interactions are essential in this process. It also indicates the vital role of a mercapto group in wood stabilization by organosilicons. This 2D NMR technique sheds new light on the chemical mechanisms involved in organosilicon consolidation of wood and reveals what chemical characteristics are essential in developing future conservation treatments.

Biogas Pollution and Mineral Deposits Formed on the Elements of Landfill Gas Engines

Municipal landfills generate a significant amount of high-energy biogas, which can be used as a renewable gaseous fuel. However, it is necessary to improve the quality of this biogas due to the presence of various chemical compounds. The most common pollutants in landfill biogas include volatile compounds of silicon, sulphur, phosphorus and chlorine. The aforementioned elements, as well as other metals, were found both in the deposits and in the engine oil. The paper presents detailed characteristics of the solid residues formed in selected parts of gas engines powered by landfill biogas. Its elemental composition and morphology were investigated in order to determine the structure and influence of these deposits. In order to better understand the observed features, selected analyses were also conducted for biogas, engine oil and the condensate generated during biogas dewatering. It was found that the content of individual elements in samples collected from the same part of the gas engine but sourced from various landfills vary. The occurrence of elements in deposits, e.g., Mg, Zn, P and Cr, depends on the location of sampling sites and the type of engine. It was also observed that the deposits formed in parts that come into contact with both biogas and engine oil contain Ca or Zn, which can be related to biogas pollutants as well as different oil additives. The presence of Al, Fe, Cu, Cr, Sn or Pb in selected motor oil samples can be explained by the penetration of metallic abrasives, which confirms the abrasive properties of the formed deposits. The analysis of the characteristic deposits may contribute to the selection of an appropriate landfill biogas purification technology, thus reducing the operating costs of energy cogeneration systems. Finally, we highlight challenges for biogas purification processes and anticipate the direction of future work.

Luminescent Coatings Based on (3-Aminopropyl)triethoxysilane and Europium Complex β-Diketophosphazene

The reaction of β-diketophosphazene with the europium (III) salt synthesized the corresponding metal complex which was structured with (3-aminopropyl)triethoxysilane and treated with dibenzoylmethane for additional coordination of europium atoms. The polymer thus obtained exhibits luminescence with a maximum of 615 nm, which is characteristic of europium. The polymer is thermally stable up to 300 °C, the coating based on it has a contact angle of 101°, and the adhesive strength of the coating to non-finished glass (according to ISO 2409: 2013) is 1 point.

Strength and Water-Repelling Properties of Cement Mortar Mixed with Water Repellents

In this study, the compressive strength and water contact angle of mortar specimens prepared by mixing two types of water repellent with ordinary Portland cement (OPC) and rapid-hardening cement mortar were measured before and after surface abrasion. In addition, the hydration products and chemical bonding of cement mortar with the repellents were examined using X-ray diffraction (XRD), thermogravimetry-differential thermal analysis (TG-DTA), and Fourier-transform infrared spectroscopy (FT-IR) to evaluate the performance of these cement mortar mixtures as repair materials. We found that the fast-hardening cement mortar mixture containing the oligomer water repellent showed the best performance with a high compressive strength and large water contact angle. With the oligomer water repellent, the rapid-hardening cement mortar mixture showed contact angles of 131° and 126° even after a 2 mm abrasion, thereby confirming that the water repellent secured hydrophobicity through strong bonding with the entire cement mortar as well as its surface. The compressive strengths were found to be 34.5 MPa at 3 h and 54.8 MPa at 28 days, confirming that hydration occurred well despite the addition of water repellent.

Siloxane-Starch-Based Hydrophobic Coating for Multiple Recyclable Cellulosic Materials

The results of the application of a new hydrophobization agent based on a triethoxymethylsilane and standard starch aqueous mixture for mass-produced cellulosic materials—printing paper, paperboard, and sack paper—have been evaluated to examine whether such a mixture can be used in industrial practice. The application of this agent on laboratory sheets prepared in a repetitive recycling process was performed to investigate its influence on the formation and properties of the products, as well as the contamination of circulating water. Measurements of the water contact angle, Cobb tests, and water penetration dynamics (PDA) were performed to test the barrier properties of the resulting materials. The effects of the applied coatings and recycling process on the paper’s tensile strength, tear index, roughness, air permeance, and ISO brightness were studied. Studies have proven that this formulation imparts relatively high surface hydrophobicity to all materials tested (contact angles above 100°) and a significant improvement in barrier properties while maintaining good mechanical and optical performance. The agent also does not interfere with the pulping and re-forming processes during recycling and increases circulation water contamination to an acceptable degree. Attenuated total reflectance Fourier-transform infrared (FT-IR) spectra of the paper samples revealed the presence of a polysiloxane network on the surface.

The Effects of Hydrophobicity and Textural Properties on Hexamethyldisiloxane Adsorption in Reduced Graphene Oxide Aerogels

To expand the applications of graphene-based materials to biogas purification, a series of reduced graphene oxide aerogels (rGOAs) were prepared from industrial grade graphene oxide using a simple hydrothermal method. The influences of the hydrothermal preparation temperature on the textural properties, hydrophobicity and physisorption behavior of the rGOAs were investigated using a range of physical and spectroscopic techniques. The results showed that the rGOAs had a macro-porous three-dimensional network structure. Raising the hydrothermal treatment temperature reduced the number of oxygen-containing groups, whereas the specific surface area (SBET), micropore volume (Vmicro) and water contact angle values of the rGOAs all increased. The dynamic adsorption properties of the rGOAs towards hexamethyldisiloxane (L2) increased with increasing hydrothermal treatment temperature and the breakthrough adsorption capacity showed a significant linear association with SBET, Vmicro and contact angle. There was a significant negative association between the breakthrough time and inlet concentration of L2, and the relationship could be reliably predicted with a simple empirical formula. L2 adsorption also increased with decreasing bed temperature. Saturated rGOAs were readily regenerated by a brief heat-treatment at 100 °C. This study has demonstrated the potential of novel rGOA for applications using adsorbents to remove siloxanes from biogas.

Fast Curable Polysiloxane-Silphenylene Hybrimer with High Transparency and Refractive Index for Optical Applications

In this study, a fast curable polysiloxane-silphenylene hybrimer (PSH) was synthesized by the nonhydrolytic sol–gel condensation of phenyl-vinyl-oligosiloxane (PVO) and tris(dimethylhydrosilyl)benzene (TDMSB) under a Pt catalyst to investigate its optical property and thermal stability. The combination of PVO and tripod-type TDMSB results in a hybrimer with a fast curing time of 30 min. The PSH exhibited a high refractive index of 1.60, 1.59, and 1.58 at 450, 520, and 635 nm, respectively. High transmittance of 97% at 450 nm was obtained. The PSH exhibited a very high transmittance of 97% before thermal aging. The high optical transmittance of the PSH was only slightly decreased by 0.5% of the transmittance at 180 °C for 72 h after thermal aging, and high transparency was maintained almost constant even after 72 h of high-temperature treatment.

Siloxanes-Versatile Materials for Surface Functionalisation and Graft Copolymers

Siloxanes are adaptable species that have found extensive applications as versatile materials for functionalising various surfaces and as building blocks for polymers and hybrid organic-inorganic systems. The primary goal of this review is to report on and briefly explain the most relevant recent developments related to siloxanes and their applications, particularly regarding surface modification and the synthesis of graft copolymers bearing siloxane or polysiloxane segments. The key strategies for both functionalisation and synthesis of siloxane-bearing polymers are highlighted, and the various trends in the development of siloxane-based materials and the intended directions of their applications are explored.

Catalytic Synthesis of Oligosiloxanes Mediated by an Air Stable Catalyst, (C6F5)3B(OH2)

The utility of (C₆F₅)₃B(OH₂) as catalyst for the simple and environmentally benign synthesis of oligosiloxanes directly from hydrosilanes, is reported. This protocol offers several advantages compared to other methods of synthesizing siloxanes, such as mild reaction conditions, low catalyst loading, and a short reaction time with high yields and purity. The considerable H₂O-tolerance of (C₆F₅)₃B(OH₂) promoted a catalytic route to disiloxanes which showed >99% conversion of three tertiary silanes, Et₃SiH, PhMe₂SiH, and Ph₃SiH. Preliminary data on the synthesis of unsymmetrical disiloxanes (Si-O-Si') suggests that by modifying the reaction conditions and/or using a 1:1 combination of silane to silanol the cross-product can be favored. Intramolecular reactions of disilyl compounds with catalytic (C₆F₅)₃B(OH₂) led to the formation of novel bridged siloxanes, containing a Si-O-Si linkage within a cyclic structure, as the major product. Moreover, the reaction conditions enabled recovery and recycling of the catalyst. The catalyst was re-used 5 times and demonstrated excellent conversion for each substrate at 1.0 mol% catalyst loading. This seemingly simple reaction has a rather complicated mechanism. With the hydrosilane (R₃SiH) as the sole starting material, the fate of the reaction largely depends on the creation of silanol (R₃SiOH) from R₃SiH as these two undergo dehydrocoupling to yield a disiloxane product. Generation of the silanol is based on a modified Piers-Rubinsztajn reaction. Once the silanol has been produced, the mechanism involves a series of competitive reactions with multiple catalytically relevant species involving water, silane, and silanol interacting with the Lewis acid and the favored reaction cycle depends on the concentration of various species in solution.

n-Type Thin-Film Transistors Based on Diketopyrrolopyrrole Derivatives: Role of Siloxane Side Chains and Electron-Withdrawing Substituents

The physical properties, packing, morphology, and semiconducting performance of a planar π-conjugated system can be effectively modified by introducing side chains and substituent groups, both of which can be complementary to the π framework in changing the intermolecular association, frontier molecular orbital energy, optical band gap, and others. We herein show that installation of end-capped electron-withdrawing groups (EWGs), such as dicyanovinyl (-DCV), 3-ethylrhodanine (-RD), and 2-(3-oxo-indan-1-ylidene)-malononitrile (-INCN), together with siloxane side chains to the backbones of dithienyldiketopyrrolopyrrole (DPPT), such as DPPT-Si-DCV, DPPT-Si-RD, and DPPT-Si-INCN, can greatly improve its solubility, air stability, and film morphology to serve as an n-channel in thin-film transistor fabrication. The EWGs attached to the DPPT core narrowed the optical band gap (E_g^opt) and changed the highest occupied molecular orbital and the lowest unoccupied molecular orbital energies (E_HOMO and E_LUMO), making them suitable for n-channel field-effect transistor (FET) applications. The benefits of introducing siloxane side chains to the DPPT core include enhanced solubility, low crystallization barrier, enantiotropic phase behavior, and much improved FET performance. The DPPT-Si-INCN film displayed low-lying HOMO (-5.82 eV) and LUMO (-4.60 eV) energy levels and an optical band gap as low as 1.22 eV, all of which suggest that this derivative can be quite resistant toward aerial oxidation. Thin films of these derivatives were prepared by the solution-shear method. A comparison of the solution-sheared films indicated that the molecular packing motif of DPPT-Si-INCN film was somehow different from that of DPPT-Si-DCV and DPPT-Si-RD, in which the π-π stacking tended to align orthogonally to the shearing direction. This specific π-π stacking alignment could have an impact on the electron mobility (μ_e) values in transistors based on the solution-sheared films.

Foldable and Extremely Scratch-Resistant Hard Coating Materials from Molecular Necklace-like Cross-Linkers

A flexible hard coating material displaying extreme scratch resistance and foldable flexibility was developed via the design of an organic-inorganic hybrid coating material employing an alkoxysilyl-functionalized polyrotaxane cross-linker (PRX_Si1). PRX_Si1 has a molecular necklace-like structure that can form organic-inorganic cross-linking points and provide large molecular movements. It was postulated that the scratch resistance and flexibility could be simultaneously increased because of the hybrid cross-linking points and dynamic molecular movements. To confirm this hypothesis, the crystalline structure and mechanical properties of the PRX_Si1-based hard coating material were analyzed via transmission electron microscopy, small-angle X-ray diffraction, tensile, pencil hardness, and scratch tests. Finally, the PRX_Si1-based hard coating material could form homogeneously dispersed nanoscale siloxane crystalline domains, and the strain at the break point was 3 times higher than that of a commercial hard coating material, resulting in no defect formation even after 5000 folding test runs. Moreover, the material displayed extremely high pencil hardness (9H) and scratch resistance.

Synthesis of Organosilyl-Functionalized Cage-Type Germanoxanes Containing Fluoride Ions

Eight corners of a double-four ring cage-type germanoxane, containing a fluoride ion, were successfully silylated by the combination of chlorosilanes and silazanes. Three different silyl groups, trimethylsilyl, dimethylsilyl, and dimethylvinylsilyl, were attached on the corners of germanoxane cage. The solubility and reactivity of the cage modified with dimethylvinylsilyl groups were significantly increased, allowing for further reaction. Hydrosilylation reaction between dimethylvinylsilylated cage geramanoxanes and dimethylsilylated cage siloxanes afforded porous solids. Functionalization of the corners of germanoxanes with silyl groups should provide valuable building blocks in various functional materials.

Hydrosilylation of Reactive Quantum Dots and Siloxanes for Stable Quantum Dot Films

The reactive acrylate-terminated CdZnSeS/ZnS quantum dots (QDs) were designed and prepared by the effective synthetic route to bond with a siloxane matrix via hydrosilylation. The conventional QD with oleic acid ligands does not have any reactivity, so the QDs were functionalized to assign reactivity for the QDs by the ligand modification of two step reactions. The oleic acid of the QDs was exchanged for hydroxyl-terminated ligands as an intermediate product by one-pot reaction. The hydroxyl-terminated QDs and acrylate-containing isocyanates were combined by nucleophilic addition reaction with forming urethane bonds and terminal acrylate groups. No degradation in quantum yield was observed after ligand exchange, nor following the nucleophilic addition reaction. The modification reactions of ligands were quantitatively controlled and their molecular structures were precisely confirmed by FT-IR and ¹H-NMR. The QDs with acrylate ligands were then reacted with hydride-terminated polydimethylsiloxane (H-PDMS) to form a QD-siloxane matrix by thermal curing via hydro-silylation for the first time. The covalent bonding between the QDs and the siloxane matrix led to improvements in the stability against oxygen and moisture. Stability at 85 °C and 85% relative humidity (RH) were both improved by 22% for the QD-connected siloxane QD films compared with the corresponding values for conventional QD-embedded poly(methylmethacrylate) (PMMA) films. The photo-stability of the QD film after 26 h under a blue light-emitting diode (LED) was also improved by 45% in comparison with those of conventional QD-embedded PMMA films.

A Bifunctional Electrolyte Additive for High-Voltage LiNi0.5Mn1.5O4 Positive Electrodes

4-(Trimethylsiloxy)-3-pentene-2-one (TMSPO) is tested as an electrolyte additive to enhance Coulombic efficiency and cycle retention for the Li/LiNi_0.5Mn_1.5O₄ (LNMO) half-cell and graphite/LNMO full-cell. TMSPO carries two functional groups, siloxane (-Si-O-) and carbon-carbon (C═C) double bonds. It is found that the siloxane group reacts with hydrogen fluoride (HF), which is generated by hydrolysis of lithium hexafluorophosphate (LiPF₆) by impure water in the electrolyte solution, to produce 4-hydroxypent-3-ene-2-one (HPO). The as-generated HPO, as well as TMSPO itself, is electrochemically oxidized to form a protective surface film on the LNMO electrode, in which it is inferred that the carbon-carbon (C═C) double bond initiates radical polymerization. The surface film derived from the TMSPO-added electrolyte shows a superior passivating ability to that generated from the pristine (TMSPO-free) electrolyte. The suppression of electrolyte oxidation enabled by the superior passivating ability offers two beneficial features to the half-cells and full-cells: the suppression of both HF generation and deposition of the resistive surface film on LNMO. As a result, the metal dissolution by HF attack on LNMO appears to be smaller by the addition of TMSPO. The cell polarization is also less significant because of the latter beneficial feature. In short, the bifunctional activity of TMSPO (HF scavenger and protective film former) allows an enhanced Coulombic efficiency and cycle retention to the half-cell and full-cell.

Diffusion Mechanism of Aqueous Solutions and Swelling of Cellulosic Fibers in Silicone Non-Aqueous Dyeing System

The main goal of this article is to study the diffusion mechanism of aqueous solutions and the swelling of cellulosic fibers in the silicone non-aqueous dyeing system via fluorescent labeling. Due to non-polar media only adsorbing on the surface of fiber, cellulosic fiber could not swell as a result of the non-polar media. However, because water molecules can diffuse into the non-crystalline region of the fiber, cellulosic fiber could swell by water which was dispersed or emulsified in a non-aqueous dyeing system. To study the diffusion mechanism of an aqueous solution in the siloxane non-aqueous dyeing system, siloxane non-aqueous media was first diffused to the cellulosic fiber because of its lower surface tension. The resulting aqueous solution took more time to diffuse the surface of the cellulosic fiber, because water molecules must penetrate the siloxane non-aqueous media film. Compared with the fluorescent intensity of the fiber surface, the siloxane film could be re-transferred to the dye bath under the emulsification of the surfactant and the mechanical force. Therefore, a longer diffusion time of the aqueous solution ensured the dyeing feasibility for cellulosic fiber in the non-aqueous dyeing system.

Synthesis, Structures, and Thermal Properties of Symmetric and Janus "Lantern Cage" Siloxanes

Symmetric and asymmetric (Janus-type) new "lantern cage" siloxanes (PhSiO_1.5 )₄ (Me₂ SiO)₄ (RSiO_1.5 )₄ (R=Ph or iBu) were synthesized through reaction of all-cis-[PhSi(OSiMe₂ Br)O]₄ with all-cis-[RSi(OH)O]₄ (R=Ph or iBu). These precursors were obtained by facile two or three-step reactions from commercially available compounds. The spectroscopic properties of the resulting products were fully characterized and they showed high thermal stability and sublimation without decomposition. The crystal structures clearly indicated that the internal vacancy volumes of the lantern cages are considerably larger than that of octaphenylsilsesquioxane (PhSiO_1.5 )₈ . DFT calculations of the lantern cage showed a distinctly different electronic state from that of octasilsesquioxane. These results suggest that lantern cage siloxanes have a characteristic "field" in the molecule.

Boric Acid as a Coupling Agent for Preparation of Phenolic Resin Containing Boron and Silicon with Enhanced Char Yield

In this study, an innovative, facile, and low-cost method is developed to prepare phenolic resin (PR) containing boron and silicon (BSiPR). BSiPR is synthesized by a solvent-free, one-pot method using boric acid as the coupling agent instead of silane, and methyltriethoxysilane as the silicon source. The results show that boron and silicon elements are introduced into PR via BOC and BOSi structures. The char yield of the resulting resin at 800 °C is improved to 76%. The reasons for higher char yield are investigated. The formation of BOC can reduce the content of phenolic hydroxyl, which helps to decrease the weight loss. B₂ O₃ is also formed at 400 °C, and it can prevent the release of carbon oxides. Moreover, thermally stable BOSi and SiO structures remain stable during the pyrolysis. In addition, the mechanical and ablative properties of fiber-reinforced composites are also enhanced.

Development of New D,L-Methionine-based Gelators

D,L-Methionine was chosen as a starting material for the preparation of a new gelator N-10-undecenoyl-D,L-methionylaminooctadecane (DL-Met-R₁₈). Three oligo (dimethylsiloxane)-containing gelators, DL-Met-R₁₈/Si₃, DL-Met-R₁₈/Si_7-8, and DL-Met-R₁₈/Si_14-15, were also prepared from DL-Met-R₁₈ by hydrosilylation reactions. Their gelation abilities were evaluated on the basis of the minimum gel concentration using nine solvents. Compound DL-Met-R₁₈ was able to gelate liquid paraffin and silicone oil, but it crystallized in most solvents. However, DL-Met-R₁₈/Si_7-8 resulted to be the best gelator, gelling eight solvents at low concentrations. The results of gelation tests demonstrated that the ability to form stable gels decreases in the following order: DL-Met-R₁₈/Si_7-8 ≈ DL-Met-R₁₈/Si_14-15 > DL-Met-R₁₈/Si₃ >> DL-Met-R₁₈. The aspects and thermal stabilities of the gels were investigated using three-component mixtures of solvents composed of hexadecyl 2-ethylhexanoate, liquid paraffin, and decamethylcyclopentasiloxane (66 combinations). DL-Met-R₁₈/Si₃, DL-Met-R₁₈/Si_7-8, and DL-Met-R₁₈/Si_14-15 could form gels with all these mixed solvent combinations; particularly, DL-Met-R₁₈/Si_7-8 gave rise to transparent or translucent gels. FT-IR spectra suggested that the formation of hydrogen bonds between the NH and C=O groups of the amides is one of driving forces involved in the gelation process. Aggregates comprising three-dimensional networks were studied by transmission electron microscopy. Moreover, the viscoelastic behavior of the gels was investigated by rheology measurements.

Fabrication of Durably Superhydrophobic Cotton Fabrics by Atmospheric Pressure Plasma Treatment with a Siloxane Precursor

The surface treatment of fabrics in an atmospheric environment may pave the way for commercially viable plasma modifications of fibrous matters. In this paper, we demonstrate a durably superhydrophobic cotton cellulose fabric prepared in a single-step graft polymerization of hexamethyldisiloxane (HMDSO) by N₂ and O₂ atmospheric pressure plasma. We systematically investigated effects on contact angle (CA) and surface morphology of the cotton fabric under three operational parameters: precursor value; ionization gas flow rate; and plasma cycle time. Surface morphology, element composition, chemical structure and hydrophobic properties of the treated fabric were characterized by scanning electron microscope (SEM), EDS, FTIR and CA on the fabrics. The results indicated that a layer of thin film and nano-particles were evenly deposited on the cotton fibers, and graft polymerization occurred between cellulose and HMDSO. The fabric treated by O₂ plasma exhibited a higher CA of 162° than that treated by N₂ plasma which was about 149°. Furthermore, the CA of treated fabrics decreased only 0°~10° after storing at the ambient conditions for four months, and treated fabrics could also endure the standard textile laundering procedure in AATCC 61-2006 with minimum change. Therefore, this single-step plasma treatment method is shown to be a novel and environment-friendly way to make durable and superhydrophobic cotton fabrics.

Spontaneous Crack Healing in Nanostructured Silica-Based Thin Films

Self-healing materials that can spontaneously repair damage under mild conditions are desirable in many applications. Significant progress has recently been made in the design of polymer materials capable of healing cracks at the molecular scale using reversible bonds; however, such a self-healing mechanism has rarely been applied to rigid inorganic materials. Here, we demonstrate the self-healing ability of lamellar silica-based thin films formed by self-assembly of silica precursors and quaternary ammonium-type surfactants. Specifically, spontaneous healing of cracks (typically less than 1.5 μm in width) was achieved under humid conditions even at room temperature. The randomly oriented lamellar structure with thin silica layers is suggested to play an essential role in crack closure and the reformation of siloxane networks on the fracture surface. These findings will lead to the creation of smart self-healing silica-based materials based on reversible siloxane bonds.

Scalable Synthesis of Hydrido-Disiloxanes from Silanes: A One-Pot Preparation of 1,3-Diphenyldisiloxane from Phenylsilane

A simple, one-pot, and high-yielding synthesis of 1,3-diphenyldisiloxane is presented. The preparation of similar symmetrical disiloxane materials is also accomplished with this same protocol. This mechano-chemical procedure is efficient and highly scalable, furnishing a convenient route to hydrido-disiloxanes from widely accessible commercially available silanes.

3D Orientational Control in Self-Assembled Thin Films with Sub-5 nm Features by Light

While self-assembled molecular building blocks could lead to many next-generation functional organic nanomaterials, control over the thin-film morphologies to yield monolithic sub-5 nm patterns with 3D orientational control at macroscopic length scales remains a grand challenge. A series of photoresponsive hybrid oligo(dimethylsiloxane) liquid crystals that form periodic cylindrical nanostructures with periodicities between 3.8 and 5.1 nm is studied. The liquid crystals can be aligned in-plane by exposure to actinic linearly polarized light and out-of-plane by exposure to actinic unpolarized light. The photoalignment is most efficient when performed just under the clearing point of the liquid crystal, at which the cylindrical nanostructures are reoriented within minutes. These results allow the generation of highly ordered sub-5 nm patterns in thin films at macroscopic length scales, with control over the orientation in a noncontact fashion.

Surface Modification of Poly(lactic acid) Fabrics with Plasma Pretreatment and Chitosan/Siloxane Polyesters Coating for Color Strength Improvement

As people in the 21st century become increasingly environmentally aware, environmentally friendly products have come into focus. As such, environmentally friendly textiles and eco-textiles have become an international trend in research and development. Poly(lactic acid) fiber, which is biodegradable, holds much promise, but it is difficult to deep dye. This study used chitosan, succine anhydride, siloxane, and polyethylene glycol to produce a series of chitosan/siloxane polyesters that have a hydrophilic component (chitosan) and a hydrophobic component (siloxane), and this chitosan/siloxane polyester can be coated on poly(lactic acid) fiber, which we had subjected to Argon plasma treatment to increase their antimicrobial properties and to increase the fibers dyeing efficiency. The study shows that, after the surface plasma treatment, longer PEG chain lengths resulted in higher K/S values. This result suggests that the surface plasma pretreatment and chitosan/siloxane polyesters coating showed that lower ∆E values result in more leveling dyeing of poly(lactic acid) fiber.

Preparation of Cotton-Wool-Like Poly(lactic acid)-Based Composites Consisting of Core-Shell-Type Fibers

In previous works, we reported the fabrication of cotton-wool-like composites consisting of siloxane-doped vaterite and poly(l-lactic acid) (SiVPCs). Various irregularly shaped bone voids can be filled with the composite, which effectively supplies calcium and silicate ions, enhancing the bone formation by stimulating the cells. The composites, however, were brittle and showed an initial burst release of ions. In the present work, to improve the mechanical flexibility and ion release, the composite fiber was coated with a soft, thin layer consisting of poly(d,l-lactic-co-glycolic acid) (PLGA). A coaxial electrospinning technique was used to prepare a cotton-wool-like material comprising "core-shell"-type fibers with a diameter of ~12 µm. The fibers, which consisted of SiVPC coated with a ~2-µm-thick PLGA layer, were mechanically flexible; even under a uniaxial compressive load of 1.5 kPa, the cotton-wool-like material did not exhibit fracture of the fibers and, after removing the load, showed a ~60% recovery. In Tris buffer solution, the initial burst release of calcium and silicate ions from the "core-shell"-type fibers was effectively controlled, and the ions were slowly released after one day. Thus, the mechanical flexibility and ion-release behavior of the composites were drastically improved by the thin PLGA coating.

Facile Fabrication of Near-Infrared-Resonant and Magnetic Resonance Imaging-Capable Nanomediators for Photothermal Therapy

Although many techniques exist for fabricating near-infrared (NIR)-resonant and magnetic resonance imaging (MRI)-capable nanomediators for photothermal cancer therapy, preparing them in an efficient and scalable process remains a significant challenge. In this report, we exploit one-step siloxane chemistry to facilely conjugate NIR-absorbing satellites onto a well-developed polysiloxane-containing polymer-coated iron oxide nanoparticle (IONP) core to generate dual functional core-satellite nanomediators for photothermal therapy. An advantage of this nanocomposite design is the variety of potential satellites that can be simply attached to impart NIR resonance, which we demonstrate using NIR-resonant gold sulfide nanoparticles (Au2SNPs) and the NIR dye IR820 as two example satellites. The core-satellite nanomediators are fully characterized by using absorption spectra, dynamic light scattering, ζ potential measurements, and transmission electron microscopy. The enhanced photothermal effect under the irradiation of NIR laser light is identified through in vitro solutions and in vivo mice studies. The MRI capabilities as contrast agents are demonstrated in mice. Our data suggest that polysiloxane-containing polymer-coated IONPs can be used as a versatile platform to build such dual functional nanomediators for translatable, MRI-guided photothermal cancer therapy.

Molecular-level insights into the reactivity of siloxane-based electrolytes at a lithium-metal anode

A molecular-level understanding of the reactions that occur at the lithium-metal anode/electrolyte interphase is essential to improve the performance of Li-O(2) batteries. Experimental and computational techniques are applied to explore the reactivity of tri(ethylene glycol)-substituted trimethylsilane (1NM3), a siloxane-based ether electrolyte, at the lithium-metal anode. In situ/ex situ X-ray diffraction and Fourier-transform infrared spectroscopy studies provide evidence of the formation of lithium hydroxide and lithium carbonates at the anode upon gradual degradation of the metallic lithium anode and the solvent molecules in the presence of oxygen. Density functional calculations performed to obtain a mechanistic understanding of the reductive decomposition of 1NM3 indicate that the decomposition does not require any apparent barrier to produce lithium hydroxide and lithium carbonates when the reduced 1NM3 solvent molecules interact with the oxygen crossing over from the cathode. This study indicates that degradation may be more significant in the case of the 1NM3 solvent, compared to linear ethers such as tetraglyme or dioxalone, because of its relatively high electron affinity. Also, both protection of the lithium metal and prevention of oxygen crossover to the anode are essential for minimizing electrolyte and anode decomposition.

The Design and Investigation of Nanocomposites Containing Dimeric Nematogens and Liquid Crystal Gold Nanoparticles with Plasmonic Properties Showing a Nematic-Nematic Phase Transition (Nu-Nx/Ntb)

The construction of liquid crystal compositions consisting of the dimeric liquid crystal, CB_C9_CB (cyanobiphenyl dimer = 1'',9''-bis(4-cyanobiphenyl-4'-yl)nonane), and the range of nematic systems is explored. The materials include a laterally functionalized monomer, which was used to construct a phase diagram with CB_C9_CB, as well as one laterally linked dimer liquid crystal material and two liquid crystal gold nanoparticle (LC-Au-NPs) systems. For the Au-NP-LCs, the NP diameters were varied between ~3.3 nm and 10 nm. Stable mixtures that exhibit a nematic-nematic phase transition are reported and were investigated by POM (polarizing optical microscopy), DSC (differential scanning calorimetry) and X-ray diffraction studies.

Synthesis and characterization of ferroelectric liquid crystalline organosiloxanes containing 4-(4-undecanyloxy bi-phenyl-1-carboxyloxy)phenyl (2S,3S)-2-chloro-3-methylvalerate and 4-(4-undecanyloxybenzoyloxy)biphenyl (2S,3S)-2-chloro-3-methylvalerate

A series of new organosiloxane ferroelectric liquid crystalline (FLC) materials have been synthesized, and their mesomorphic and physical properties have been characterized. Four new disiloxanes and trisiloxanes, containing biphenyl 4-hydroxybenzoate and phenyl 4-hydroxybiphenylcarboxylate as mesogenic units and eleven methylene unit as spacers and (2S,3S)-2-chloro-3-methylvalerate unit as chiral end groups. The molecule, using three phenyl ring as a mesogenic unit, formulates much wider liquid crystalline phase temperature ranges than that of a two phenyl ring unit. The phenyl arrangement differences of mesogenic unit result in the greater differences of the liquid crystal phase formation. The siloxane molecule induction is helpful to the more regular smectic phase formation and smectic phase stabilization, such as chiral SC (SC*) and SB phases. The siloxane molecule is helpful to reduce the phase transition temperature and broaden the liquid crystal temperature range of the SC* phase and, simultaneously, it will not induce chain crystallization phenomenon and dilute the Ps value. The synthesis and characterization of the new FLCs materials, which exhibit a room temperature SC* phase and higher spontaneous polarization are presented.

Direct scaffolding of biomimetic hydroxyapatite-gelatin nanocomposites using aminosilane cross-linker for bone regeneration

Hydroxyapatite-gelatin modified siloxane (GEMOSIL) nanocomposite was developed by coating, kneading and hardening processes to provide formable scaffolding for alloplastic graft applications. The present study aims to characterize scaffolding formability and mechanical properties of GEMOSIL, and to test the in vitro and in vivo biocompatibility of GEMOSIL. Buffer Solution initiated formable paste followed by the sol-gel reaction led to a final hardened composite. Results showed the adequate coating of aminosilane, 11-19 wt%, affected the cohesiveness of the powders and the final compressive strength (69 MPa) of the composite. TGA and TEM results showed the effective aminosilane coating that preserves hydroxyapatite-gelatin nanocrystals from damage. Both GEMOSIL with and without titania increased the mineralization of preosteoblasts in vitro. Only did titania additives revealed good in vivo bone formation in rat calvarium defects. The scaffolding formability, due to cohesive bonding among GEMOSIL particles, could be further refined to fulfill the complicated scaffold processes.

Poly(N-acylethylenimine) copolymers containing pendant pentamethyldisiloxanyl groups. I. Synthesis

10-(Pentamethyl disiloxanyl) decyl oxazoline (Si) was synthesized. It was copolymerized with either undecyl (U) or nonyl (N) oxazolines using methyl 4-nitrobenzenesulfonate as initiator. Two series of random poly(N-acylethylenimine) copolymers, U/Si and N/Si, were synthesized over the whole composition range of Si monomer with a total degree of polymerization of about 100. Narrow molecular weight distributions were obtained. At a monomer to initator ratio of about 1060, the final degree of polymerization was 374 with a polydispersity index of 1.93. This shows the effect of chain transfer in this system.