Effect of defatted Lagenaria siceraria (Molina) Standley seed flour as a fat replacer on physicochemical, technological, and sensory properties of beef patty

Defatted Lagenaria siceraria seed flour (DLSSF) was obtained from defatted seed cake, dried, and ground through a sieve of 500 μm and characterized. A 2 × 4 factorial design (two flour hydration rates and four fat substitution rates) was used to produce a low-fat beef patty by replacing fat with DLSSF. Beef kidney fat was used to formulate the control sample. Chemical, physical, technological, sensory, and nutritional characteristics of low-fat beef patties manufactured were evaluated. DLSSF contains mainly protein. As fat replacers, DLSSF induces a significant increase in the pH of the raw and cooked patty, the moisture and protein contents, the cooking yield, the cohesion, chewiness, springiness, and lightness of the cooked beef patty with fat substitution rate. There is a decrease in fat content, total calories, water retention capacity, hardness, and redness of the cooked patty with a fat substitution rate. From the sensory analysis, the substitution of fat improves the acceptability of samples. Based on the overall parameters analyzed, DLSSF containing 60% water can be used to produce low-fat beef patty by replacing fat at 100%. From these results, hydrated DLSSF could be an effective method to solve the problems of noncommunicable diseases related to animal fat consumption.

Agave inulin as a fat replacer in tamales: Physicochemical, nutritional, and sensory attributes

Tamales are a traditional dish rich in fat and carbohydrates with increasing popularity. The present study aimed to investigate the use of agave inulin powder (AIP) as a potential fat replacer in tamales. The effect of replacing 0%, 33%, 66%, and 100% (w/w) of fat with AIP was evaluated in the physicochemical, sensory, and nutritional features of tamales. The fat content of tamales decreased up to 88% in AIP tamales, whereas total dietary fiber (TDF) increased up to 14%. TDF in AIP tamales had a higher proportion of soluble dietary fiber (SDF). Moreover, results indicated that both insoluble and SDF were formed during the processing of tamales. Fat replacement led to a reduction of up to 26% in the calorie load of tamales. Fourier transform infrared spectroscopy analysis confirmed changes in the absorption bands related to carbohydrates, with increments in peaks associated with inulin (936 and 862 cm-1 ), and inhibition of retrogradation when inulin was included. AIP addition resulted in tamales with lighter color. Fat replacement with AIP affected the texture of tamales increasing their softness, adhesiveness, and cohesiveness. In general, inulin positively affected the hedonic attributes and acceptance of tamales. Interestingly, full-fat tamales had a lower glycemic index and presented higher contents of resistant starch compared to tamales with AIP. Nevertheless, agave inulin may serve as a fat replacer yielding reduced-fat tamales with higher TDF and SDF and yielding a lower calorie load without significantly affecting the sensory acceptability of this traditional meal.

Functionality and consumer acceptability of low-fat breakfast sausages processed with non-meat ingredients of pulse derivatives

BACKGROUND

Owing to recent changes in consumer eating behaviours as well as potential cost savings for processors, pulse ingredients are finding more application in the meat processing industry. In this study, pea ingredients (pea fibre, FB; pea starch, ST; pea flour, PF) and chickpea flour (CF) were used, at 4% addition level, as fat replacers in low-fat breakfast sausages. The impact of these substitutions on processing and sensory characteristics of breakfast sausage was evaluated.

RESULTS

While reduction in fat content in breakfast sausage resulted in some detrimental changes in cooking as well as textural characteristics of the product, addition of binders significantly improved these attributes in low-fat breakfast sausages. Overall, treatment formulation did not significantly affect the pH and the instrumental colour attributes of cooked breakfast sausage. Addition of all binders resulted in reduced cooking loss and increased moisture retention in low-fat breakfast sausage (P < 0.05), whereas, FB and ST were significantly more effective in improving water holding capacity of low-fat breakfast sausage. Furthermore, while both FB and ST increased the hardness, cohesiveness and chewiness parameters of low-fat breakfast sausage (P < 0.05), PF and CF had no impact. Generally, the consumer overall liking and flavour acceptability of FB and ST in low-fat breakfast sausage were significantly higher than those of PF and CF.

CONCLUSION

The use of ST or FB as a fat replacer in breakfast sausages offers processors improved cook yield without negatively impacting the important sensory attributes of breakfast sausages. © 2021 Society of Chemical Industry.

Monoglyceride oleogels as fat replacers in filling creams for sandwich cookies

BACKGROUND

Many food products need to be reformulated to reduce the intake of saturated and trans fats which are considered unhealthy. In particular, the reformulation of filling creams (FCs) is challenging as these fats cannot be directly replaced with liquid oil without affecting the final product properties. This research studied the formulation and characterization of FCs for sandwich cookies using monoglyceride oleogel as fat material.

RESULTS

FC formulated with 260 g kg^-1 oleogel showed viscoelastic moduli values that did not differ significantly from those measured in a filling cream of commercial sandwich cookies (FC-CSCs) used as reference. The oil binding capacity of the FCs decreased with the increase of oleogel content. The increase of the oleogel amount in the formulation produced a decrease in hardness but an increase in adhesiveness and cohesiveness. Hardness, adhesiveness, and cohesiveness ranged from 0.66 to 3.48 N, 0.44 to 0.86 N s, and 0.07 to 0.29, respectively. When FCs were used for assembling cookies into sandwiches, an oil loss of about 9 g kg^-1 FC after 21 days of storage was found in FCs containing 220 and 260 g kg^-1 oleogel. The nutritional improvement due to the use of oleogel in FCs led to a reduction in saturated fatty acids between 64.5% and 35.2% and from 1.0 to 0.0% trans fatty acids in comparison with FC-CSC.

CONCLUSION

Full fat replacement with monoglyceride oleogel in FC formulations allows the obtention of products with good quality and some similar characteristics to those obtained for FC-CSC, with the added benefit of a healthier nutritional profile. © 2020 Society of Chemical Industry.

Using inulin-based emulsion gels as fat substitute in salt reduced Bologna sausage

BACKGROUND

A high-fiber emulsion gel (EG) containing inulin, soy protein isolate, and soybean oil was applied as animal fat replacer in reduced salt and fat Bologna sausage containing mechanically deboned chicken meat, pork meat, and pork back fat. Technological and microbiological properties were evaluated for 60 days at 4 °C.

RESULTS

A reduction of 11 to 34% and 35 to 45% of fat and sodium were obtained in reformulated products, respectively. An increase in fiber content and polyunsaturated fatty acid was noticed in the formulations with EG. The addition of EG in Bologna increased L* (lightness) values and reduced a* (redness/greenness) values comparing to control treatment. Microstructural properties of sausages exhibited a denser network with the presence of EG. Softer, more elastic, cohesive and resilient samples with a higher intensity of lipid oxidation (P < 0.05) were observed in EG added sausages. The nuclear magnetic resonance (NMR) data shows that the presence of EG recovers the matrix that has been weakened due to reduction of fat and salt. Sensory evaluation showed that the incorporation of the EGs resulted in acceptable scores.

CONCLUSION

These results suggest that inulin-based EG is a potential fat substitute for developing healthier meat products, with better fatty acids composition and stable to chilled storage. © 2020 Society of Chemical Industry.

Assessment of emulsion gels formulated with chestnut (Castanea sativa M.) flour and chia (Salvia hispanica L) oil as partial fat replacers in pork burger formulation

BACKGROUND

The aim of this work was to evaluate the effect on chemical composition, physico-chemical properties, cooking characteristics, fatty acid profile, lipid oxidation, and sensory acceptability of an oil-in-water emulsion gel that was prepared with chestnut flour, chia oil, gellan gum, and water (CEG), used as a fat replacer in pork burgers. The original mixture was used as a control sample (CS). The other samples were formulated partially replacing pork backfat with 5% of CEG (CEG5%) and 10% of CEG (CEG10%).

RESULTS

Proximate analysis of samples showed several differences between samples. The CEG addition was found to be effective for improving the cooking yield while diameter reduction and thickness increase were positively affected. As regards lipid oxidation, in cooked burger, the 2-thiobarbituric acid (TBA) values for CS, CEG5% and CEG10% were 0.46, 0.57, and 0.59 mg malonaldehyde/kg sample, respectively. The linolenic and linolenic acid content of pork burger increased as CEG addition increased. Sensory properties for CS and CEG5% were similar whereas CEG10% showed the highest sensory scores.

CONCLUSIONS

A combination of chestnut flour and chia oil could be used as a novel ingredient to develop pork burgers with a better nutritional profile without diminishing their sensory and physico-chemical properties. © 2019 Society of Chemical Industry.

O/W Pickering emulsions stabilized by Flammulina velutipes polysaccharide nanoparticles as a fat substitute: the effects of phase separation on emulsified sausage's techno-functional and sensory quality

BACKGROUND

The application of Pickering emulsion stabilized by food-derived particles is of great interest in the food field, including meat processing. However, the creaming phenomenon is a thorny problem and may impact the resulting product quality. Here, we used polysaccharide nanoparticles from Flammulina velutipes (FVPN) as a stabilizer to prepare a oil/water Pickering emulsion and partly replace the original fat of common emulsified sausage, focusing on exploring the influence of phase separation on the sausage's techno-functional and sensory quality, with the aim of developing a new alternative fat substitute.

RESULTS

Reformulated sausages showed increases in moisture (53.24-64.85%) and protein content (11.97-12.76%), but were reduced in fat content (27.28-18.76%). The increased FPOE (FVPN-palm oil emulsion; substitution rate 5-37%) amount in sausages resulted in significantly reduced (P < 0.05) cooking loss (18.87-8.63%). Meanwhile, emulsion improved the springiness and cohesiveness of sausage and significantly reduced (P < 0.05) hardness and chewiness when the replacement amount was less than 20%. Experimental sausages attained a more compact pore structure without harming sensory characteristics. Compared with creaming emulsion, pristine emulsion resulted in a sausage with higher moisture content, lower cooking loss, better elasticity and denser structure.

CONCLUSION

The characteristics of sausages could be influenced by emulsion stability. Emulsion, especially with no creaming, can be effectively used as fat substitute at a level of 20% or less without adversely affecting the sensory characteristics of emulsified sausages. The incorporation of FPOE provides the potential for developing a new alternative approach for animal fat improvement in meat products. © 2019 Society of Chemical Industry.

Evaluation of linseed oil oleogels to partially replace pork backfat in fermented sausages

BACKGROUND

Nowadays, fat replacement in meat products is a matter of concern in the meat industry. The objective of this study was to evaluate the replacement of pork backfat with two oleogels of linseed in dry-cured sausages.

RESULTS

Five batches of dry-cured sausages were prepared with two oleogels, a mixture of γ-oryzanol and β-sitosterol (SO) and beeswax (B), at two levels of replacement (20% and 40%) (SO-20, SO-40, B-20, and B-40, respectively) and a control batch. The fatty acid profile improved in terms of nutrition: the polyunsaturated fatty acid / saturated fatty acid (PUFA/SFA) and n-6/n-3 ratio was about 1.41 and 0.93 for the higher levels of replacement, SO-40 and B-40, respectively. Quality parameters such as pH and color also changed with the inclusion of oleogels, resulting in changes in the sensory quality.

CONCLUSION

Oleogels based on linseed enabled the replacement of pork backfat in fermented sausages. Depending on the level of fat substitution, such oleogels could replace fat in dry-cured sausages at the industrial level. © 2019 Society of Chemical Industry.

Partial replacement of pork fat by Echium oil in reduced sodium bologna sausages: technological, nutritional and stability implications

BACKGROUND

The present research aimed to evaluate the nutritional, technological, microstructural and sensory characteristics of bologna sausages made with pork fat replaced with Echium oil. Three different treatments were processed, all of them with approximately 35% less sodium than a regular bologna-type sausage: Control (only pork backfat addition) and T25 and T50 (replacement of 25 and 50% of the added animal fat with Echium oil respectively).

RESULTS

Proximate composition, texture profile analysis, fatty acid profile and microstructure were evaluated to characterize the products. In refrigerated storage, the following characteristics were assessed: thiobarbituric acid-reactive substances (TBARS) index, objective color, pH value, microbiological counts and sensory acceptance. Both samples with Echium oil (T25 and T50) showed a healthier lipid profile, with high omega-3 content, mainly from α-linolenic and stearidonic fatty acids, consequently presenting better (P ≤ 0.05) values of nutritional indices than the Control. However, the replacement of 50% animal fat with Echium oil negatively affected (P ≤ 0.05) most of the technological characteristics and the sensory acceptance of bolognas. In contrast, the treatment with 25% replacement did not show significant differences in most of the evaluated parameters compared with the Control sample.

CONCLUSION

Thus the replacement of 25% of pork backfat with Echium oil in bologna sausages can be recommended, representing a good balance between nutritional gains and sensory impairment. © 2019 Society of Chemical Industry.

The use of of inulin, maltitol and lecithin as fat replacers and plasticizers in a model reduced-fat mozzarella cheese-like product

BACKGROUND

Mono-, di- and oligosaccharides, polyhydric alcohols and lipids are three main types of plasticizers used to process food materials. In the present study, inulin, maltitol and lecithin were selected as representative oligosaccharide, polyhydric alcohol and lipid fat replacers, respectively. Their effects on the physicochemical properties of reduced-fat mozzarella cheese were evaluated.

RESULTS

Lecithin reduced the hardness and increased the degree of free oil released. Inulin and lecithin decreased the hydrophobic interaction of reduced-fat cheese. Maltitol improved the elasticity of the reduced-fat cheese and increased the hydrophobic interaction within the casein matrix. Maltitol-added cheese had a lower glass transition temperature (T_g ) than the other cheeses. Maltitol significantly improved the stretchability of the reduced-fat cheese.

CONCLUSION

The results obtained in the present study suggest that maltitol is an effective fat replacer in reduced-fat mozzarella cheese and might enhance the cheese's functional properties. The T_g of cheese was related to the water and fat content, fat replacer addition and cross-linking degree of casein. The relationship between T_g and the physicochemical properties of cheese will be studied in further research. © 2019 Society of Chemical Industry.

Effect of liver pâté enrichment with flaxseed oil and flaxseed extract on lipid composition and stability

BACKGROUND

There is an increase interest from food technologists in the improvement of the nutritional value of meat products, especially their lipid profile and shelf life. The aim of this study was to determine the effect of animal fat replacement with flaxseed oil (20%) and flaxseed extract addition (0.05%-0.25%) on changes in composition and stability of liver pâté lipid fractions.

RESULTS

Replacement of animal fat with flaxseed oil was observed to lower the saturated and monoenoic fatty acid in the product's fatty acid profile by around 12% and to raise the polyene fatty acid contribution by more than 70% when compared to the control. The replacement also resulted in enriching the pâté with phytosterols (β-sitosterol, campesterol, and cycloartenol). The addition of 0.05% and 0.10% ethanol flaxseed extract significantly slowed down lipid oxidation changes during storage of the pâté.

CONCLUSIONS

The study showed that a storage-stable meat product - liver pâté - characterized by a high nutritional value can be designed through the addition of flax oil rich in unsaturated fatty acids and flaxseed extract. The addition of 0.05% of the extract was found to be sufficient to improve the liver pâté's oxidative stability; it can thus be recommended for this type of product. © 2018 Society of Chemical Industry.

HPMC (hydroxypropyl methylcellulose) as a fat replacer improves the physical properties of low-fat tofu

BACKGROUND

The effect of the addition of hydroxypropyl methylcellulose (HPMC) on the textural properties of low-fat tofu was investigated. Three fat levels (240, 100 and 30 g kg^-1 ) were used to make tofu, which were identified as C (full-fat tofu), L1 and L2. HPMC (5 g kg^-1 ) was added to soymilk to prepare control and low-fat tofu, designated as CH, L1H and L2H.

RESULTS

Soymilk with a lower fat level had a lower viscosity: 143 (C), 100 (L1) and 42 (L2) cP. The addition of HPMC increased the viscosity of all types of soymilk, particularly in L2H (107 cP). With fat reduction, tofu syneresis increased from 19% (C) to 29% (L2), although syneresis of L2H recovered to 19%, which is similar to high-fat control tofu. Decreased fat resulted in a lower firmness in L2 (0.67 N) compared to control (0.78 N). Firmness increased to 1.08 N in L2H tofu, whereas the firmness of CH tofu was 0.63 N. All types of tofu showed a denser, well-connected and cross-linking structure when HPMC was added, especially in L2H tofu.

CONCLUSION

HPMC improved the texture of the low-fat tofu by creating a harder texture and reducing syneresis. HPMC is an effective fat replacer for lower fat soymilk. © 2017 Society of Chemical Industry.

Hydroxytyrosol extracts, olive oil and walnuts as functional components in chicken sausages

BACKGROUND

Olive oil, hydroxytyrosol and walnut can be considered ideal Mediterranean ingredients for their high polyphenolic content and healthy properties. Three extracts of hydroxytyrosol obtained using different extraction processes (HXT 1, 2, 3) (50 ppm) were evaluated for use as antioxidants in eight different chicken sausage formulas enriched in polyunsaturated fatty acids (2.5 g 100 g^-1 walnut) or using extra virgin olive oil (20 g 100 g^-1 ) as fat replacer. Lipid and protein oxidation, colour, emulsion stability, and the microstructure of the resulting chicken sausages were investigated and a sensory analysis was carried out.

RESULTS

The sausages with HXT extracts were found to decrease lipid oxidation and to lead to the loss of thiol groups compared with control sausages. Emulsion stability (capacity to hold water and fat) was greater in the sausages containing olive oil and walnut than in control sausages. In contrast, the HXT extracts produced high emulsion instability (increasing cooking losses). Sensory analysis suggested that two of the HXT extracts studied (HXT₂ and HXT₃ ) were unacceptable, while the acceptability of the other was similar to that of the control products. Sausages incorporating HXT showed different structures than control samples or sausages with olive oil, related to the composition of the emulsion.

CONCLUSION

These results suggest the possibility of replacing animal fat by olive oil and walnut in order to produce healthy meat products. © 2017 Society of Chemical Industry.

Consumers' expectations and acceptability for low saturated fat 'salami': healthiness or taste?

BACKGROUND

Nutritional properties of meat and meat products are becoming very important in purchasing behaviour, because consumers are even more concerned about healthiness. The present study aimed to examine the influence of health information on the expected and informed acceptability of salami. Traditional salami and two low saturated fat salami produced with partial or total substitution of pork backfat with extra virgin oil were evaluated.

RESULTS

Perceived acceptability was the lowest in salami with total animal fat substitution. In both low saturated fat salami, expected acceptability was significantly higher than perceived acceptability, while in traditional salami it was lower. Consumers completely assimilated their liking in the direction of expectations for salami with partial animal fat substitution, whereas incomplete assimilation was observed for salami with total animal fat substitution. The results also revealed that some sociodemographic characteristics discriminate consumer clusters from each other.

CONCLUSION

The present study highlights that nutritional information is not enough to satisfy consumers' expectations if the product is not sensorily acceptable. Findings about the relevance of information and consumers' segmentation could have important implications for policy makers and the meat product industry. © 2017 Society of Chemical Industry.

Artificial trans fat in popular foods in 2012 and in 2014: a market basket investigation in six European countries

OBJECTIVE

To minimise the intake of industrially produced trans fat (I-TF) and thereby decrease the risk of coronary heart disease (CHD), nearly all European countries rely on food producers to voluntarily reduce the I-TF content in food. The objective of this study was to monitor the change in presence of I-TF in biscuits/cakes/wafers in six countries in South-eastern Europe from 2012 to 2014, including two members of the European Union (Slovenia and Croatia).

DESIGN

Three large supermarkets were visited in each of the six capitals in 2012. Pre-packaged biscuits/cakes/wafers were bought if the products contained more than 15 g of total fat per 100 g of product and if partially hydrogenated oil or a similar term was disclosed at the beginning of the ingredients list. These same supermarkets were revisited in 2014 and the same collection procedure was followed. All foods were subsequently analysed for total fat and trans fat in the same laboratory.

RESULTS

The number of packages bought in the six countries taken together was 266 in 2012 and 643 in 2014. Some were identical, and therefore only 226 were analysed in 2012 and 434 in 2014. Packages with less than 2% of fat from I-TF went up from 69 to 235, while products with more than 2% (illegal in Denmark) doubled from an average of 33 to an average of 68 products for the six countries, with considerable variation across countries. The per cent of I-TF in total fat decreased slightly, from a mean (SD) of 22 (13) in 2012 to 18 (9) in 2014.

CONCLUSIONS

The findings suggest that voluntary reduction of I-TF in foods with high amounts is an ineffective strategy in several European countries. Alternative strategies both within and outside the European Union are necessary to protect all subgroups of the populations against an increased risk of CHD.

Tracing artificial trans fat in popular foods in Europe: a market basket investigation

OBJECTIVE

To minimise the intake of industrial artificial trans fat (I-TF), nearly all European countries rely on food producers to voluntarily reduce the I-TF content in food. The objective of this study was to investigate the effect of this strategy on I-TF content in prepackaged biscuits/cakes/wafers in 2012-2013 in 20 European countries.

DESIGN

The I-TF content was assessed in a market basket investigation. Three large supermarkets were visited in each capital, and in some countries, three additional ethnic shops were included.

RESULTS

A total of 598 samples of biscuits/cakes/wafers with 'partially hydrogenated vegetable fat' or a similar term high on the list of ingredients were analysed, 312 products had more than 2% of fat as I-TF, exceeding the legislatively determined I-TF limit in Austria and Denmark; the mean (SD) was 19 (7)%. In seven countries, no I-TF was found, whereas nine predominantly Eastern European countries had products with very high I-TF content, and the remaining four countries had intermediate levels. Of the five countries that were examined using the same procedure as in 2006, three had unchanged I-TF levels in 2013, and two had lower levels. The 18 small ethnic shops examined in six Western European countries sold 83 products. The mean (SD) was 23 (12)% of the fat as I-TF, all imported from countries in Balkan. In Sweden, this type of food imported from Balkan was also available in large supermarkets.

CONCLUSIONS

The findings suggest that subgroups of the population in many countries in Europe still consume I-TF in amounts that increase their risk of coronary heart disease. Under current European Union (EU) legislation, the sale of products containing I-TF is legal but conflicts with the WHO recommendation to minimise the intake of I-TF. An EU-legislative limit on I-TF content in foods is expected to be an effective strategy to achieve this goal.

Physicochemical properties and sensory characteristics of reduced-fat frankfurters with pork back fat replaced by dietary fiber extracted from makgeolli lees

The effects of reducing pork fat levels from 30% to 20%, 15%, and 10% by partially substituting pork back fat with a makgeolli lees fiber were investigated regarding approximate composition, energy value, pH, color, cooking loss, emulsion stability, texture profile analysis, apparent viscosity, and sensory evaluation. The moisture and ash contents, redness, and yellowness were higher in reduced-fat frankfurters containing makgeolli lees fiber than in the control with 30% fat. With increasing fat levels, samples displayed higher pH, lightness, hardness, cohesiveness, gumminess, chewiness, apparent viscosity, and sensory quality, while displaying lower cooking loss and total expressible fluid. The results show that fat levels of frankfurters with added makgeolli lees fiber can be successfully reduced. Thus, 20% fat frankfurters with the addition of 2% makgeolli lees fiber are similar in quality to regular frankfurters with 30% fat.

Model for human milk fat substitute evaluation based on triacylglycerol composition profile

Being the dominant components in human milk fat (HMF), triacylglycerol (TAG) composition might be the best approximation index to represent the composing characteristics of HMF. In this study, TAG composition of HMF from different lactation stages was analyzed by RP-HPLC-APCI-MS, and the establishment of a model for the precise evaluation of human milk fat substitutes (HMFSs) based on TAG composition was indirectly realized by employment of fatty acid composition and distribution and polyunsaturated fatty acid (PUFA) and TAG compositions. The model was verified by the selected fats and oils with specific chemical compositions, and the results revealed the degrees of similarity of these fats and oils in different evaluation aspects reflected their differences in corresponding chemical composition with HMF. The newly established evaluation model with TAG composition as a comparison base could provide a more accurate method to evaluate HMFSs and might have some inspirations for HMFS production in the future.

Establishment of an evaluation model for human milk fat substitutes

Fatty acid composition and distribution of human milk fat (HMF), from mothers over different lactating periods in Guangzhou, China, were analyzed. The universal characteristics were consistent with previously reported results although the fatty acid content was within a different range and dependent on the local population (low saturated fatty acid and high oleic acid for Guangdong mothers' milk fat). Based on the composition of the total and sn-2 fatty acids of mature milk fat, an efficient evaluation model was innovatively established by adopting the "deducting score" principle. The model showed good agreement between the scores and the degree of similarity by assessing 15 samples from different sources including four samples of HMF, eight samples of human milk fat substitutes (HMFSs) and infant formulas, and three samples of fats and oils. This study would allow for the devolvement of individual human milk fat substitutes with different and specific fatty acid compositions for local infants.

Evaluation of rice flour for use in vanilla ice cream

The effects of varying concentrations (2, 4, and 6%) of 2 types of rice flours (RF 1 and RF 2) on the physicochemical properties and sensory characteristics of vanilla ice cream samples were assessed at different fat levels (0, 4, and 10%) and storage conditions (control vs. heat-shocked). Fat and total solids were measured as well as hardness, viscosity, and melting rate. Eight trained panelists conducted descriptive sensory analyses of the samples at 0 and 7 wk. The 2% rice flour level and to a certain extent the 4% usage level generally improved texture while affecting to a lesser extent the flavor characteristics of the samples compared with the control. The RF 2 generally had a more significant effect than RF 1, especially on the texture attributes. Although the rice flour reduced the negative impact of temperature abuse on textural properties, the samples still deteriorated in textural properties (more icy) under temperature abuse conditions. In addition, rice starch does lower perceived sweetness and can have a "flour flavor" at high usage levels. The use of rice flour appears to be most advantageous for low fat ice cream samples.

Texture of Low-Fat Iranian White Cheese as Influenced by Gum Tragacanth as a Fat Replacer

The effect of different concentrations of gum tragacanth on the textural characteristics of low-fat Iranian White cheese was studied during ripening. A batch of full-fat and 5 batches of low-fat Iranian White cheeses with different gum tragacanth concentrations (without gum or with 0.25, 0.5, 0.75, or 1 g of gum/kg of milk) were produced to study the effects of fat content reduction and gum concentration on the textural and functional properties of the product during ripening. Cheese samples were analyzed with respect to chemical, color, and sensory characteristics, rheological parameters (uniaxial compression and small-amplitude oscillatory shear), and microstructure. Reducing the fat content had an adverse effect on cheese yield, sensory characteristics, and the texture of Iranian White cheese, and it increased the instrumental hardness parameters (i.e., fracture stress, elastic modulus, storage modulus, and complex modulus). However, increasing the gum tragacanth concentration reduced the values of instrumental hardness parameters and increased the whiteness of cheese. Although when the gum concentration was increased, the low-fat cheese somewhat resembled its full-fat counterpart, the interaction of the gum concentration with ripening time caused visible undesirable effects on cheese characteristics by the sixth week of ripening. Cheeses with a high gum tragacanth concentration became very soft and their solid texture declined somewhat.

Enzymatic Production of Infant Milk Fat Analogs Containing Palmitic Acid: Optimization of Reactions by Response Surface Methodology

Infant milk fat analogs resembling human milk fat were synthesized by an enzymatic interesterification between tripalmitin, coconut oil, safflower oil, and soybean oil in hexane. A commercially immobilized 1,3-specific lipase, Lipozyme RM IM, obtained from Rhizomucor miehei was used as a biocatalyst. The effects of substrate molar ratio, reaction time, and incubation temperature on the incorporation of palmitic acid at the sn-2 position of the triacylglycerols were investigated. A central composite design with 5 levels and 3 factors consisting of substrate ratio, reaction temperature, and incubation time was used to model and optimize the reaction conditions using response surface methodology. A quadratic model using multiple regressions was then obtained for the incorporation of palmitic acid at the sn-2 positions of glycerols as the response. The coefficient of determination (R2) value for the model was 0.845. The incorporation of palmitic acid appeared to increase with the decrease in substrate molar ratio and increase in reaction temperature, and optimum incubation time occurred at 18 h. The optimal conditions generated from the model for the targeted 40% palmitic acid incorporation at the sn-2 position were 3 mol/mol, 14.4 h, and 55 degrees C; and 2.8 mol/mol, 19.6 h, and 55 degrees C for substrate ratio (moles of total fatty acid/moles of tripalmitin), time, and temperature, respectively. Infant milk fat containing fatty acid composition and sn-2 fatty acid profile similar to human milk fat was successfully produced. The fat analogs produced under optimal conditions had total and sn-2 positional palmitic acid levels comparable to that of human milk fat.

[Combined fat products modern approaches to quality assessment]

The investigation was made of combined fat products quality: spreads, fats used for frying and baking, obtaining in shop. The value of peroxide number and content of cholesterol were determinated. The receiving results detect higher rate of peroxide oxidation products in spreads in compare with fats, used for frying and baking. The needing of taking out information about cholesterol content to label of combined fat product is showed and also severe control of peroxide oxidation values after spreads production.

Phytosterol additives increase blood pressure and promote stroke onset in salt-loaded stroke-prone spontaneously hypertensive rats

1. To assess the effect of dietary phytosterol on stroke and the lifespan of salt-loaded stroke-prone spontaneously hypertensive rats (SHRSP), we investigated the effects of the addition of phytosterol to soybean oil (phytosterol content: 0.3%) on stroke onset, lifespan following onset of stroke and overall lifespan compared with canola oil (phytosterol content: 0.9%). 2. Six-week-old male SHRSP were fed a test diet prepared by the addition of canola oil (CA diet), soybean oil (SO diet), soybean oil plus 0.6% phytosterol (SO + 0.06P diet) or soybean oil plus 4.5% phytosterol (SO + 0.45P diet) as a 10% fat source. 3. Systolic blood pressure (SBP) increased in the SO + 0.06P and SO + 0.45P groups compared with the SO group and the increase was dependent on the amount of phytosterol added, indicating that the addition of phytosterol to soybean oil may promote an increase in SBP in salt-loaded SHRSP. 4. The onset of stroke was shortest in the SO + 0.45P group and survival after the onset of stroke was shortest in the CA group. Consequently, the SO + 0.45P and CA groups showed marked lifespan shortening, indicating that a fivefold greater amount of phytosterol was required to produce an effect equivalent to that of canola oil. 5. Investigation of the mRNA expression of ATP-binding cassette (ABC) transporters involved in intestinal phytosterol absorption indicated significant decreases in the intestinal mRNA expression of Abcg5 and Abcg8 in SHRSP and Wistar-Kyoto rats compared with Wistar rats. 6. In conclusion, the addition of phytosterol to soybean oil elevated SBP and promoted the onset of stroke, which may cause a reduction in survival time. However, a fivefold greater amount of phytosterol was required to produce an effect that was equivalent to the survival time-shortening effect of canola oil. The significant decrease in the intestinal mRNA expression of Abcg5 and Abcg8 in SHRSP may be responsible, at least in part, for the unfavourable effects observed following the addition of phytosterol.

Effects of milk fat, cocoa butter, or selected fat replacers on flavor volatiles of chocolate ice cream

Selected volatile compounds of chocolate ice creams containing 0.6, 4.0, 6.0, or 9.0% milk fat or containing 2.5% milk fat, cocoa butter, or one of three fat replacers (Simplesse, Dairy Lo, or Oatrim) were analyzed by gas chromatography and gas chromatography-mass spectrometry using headspace solid-phase microextraction. The headspace concentration of most of the selected volatile compounds increased with decreasing milk fat concentration. Fat replacers generally increased the concentration of volatiles found in the headspace compared with milk fat or cocoa butter. Few differences in flavor volatiles were found between the ice cream containing milk fat and the ice cream containing cocoa butter. Among the selected volatiles, the concentration of 2,5-dimethyl-3(2-methyl propyl) pyrazine was the most highly correlated (negatively) with the concentration of milk fat, and it best discriminated among ice creams containing milk fat, cocoa butter, or one of the fat replacers.

Effect of milk fat, cocoa butter, and whey protein fat replacers on the sensory properties of lowfat and nonfat chocolate ice cream

Lowfat and nonfat chocolate ice creams were made with 2.5% of milk fat, cocoa butter, or one of two whey protein-based fat replacers, Dairy Lo or Simplesse. Polydextrose was added as required so that all formulations contained the same amount of total solids. Ice cream was stored at a control temperature of-30 degrees C. Hardness, viscosity, and melting rate were measured by physical methods. Trained panelists conducted descriptive sensory analyses of the samples at 0, 6, and 12 wk. Attribute ratings were analyzed by analysis o variance with least significant difference mean separation and orthogonal contrasting. Data were also analyzed by multivariate analysis of variance with canonical variate analysis. Consumer acceptance (n = 50) did not differ among the fresh ice creams (wk 0). Ice cream containing milk fat had less intense cocoa flavor and was more resistant to textural changes over time compared with the other ice creams. Simplesse was more similar to milk fat than was Dairy Lo in its effect on brown color, cocoa flavor, cocoa character, and textural stability but was less similar in terms of thickness and mouthcoating.

Rheological properties of ice cream mixes and frozen ice creams containing fat and fat replacers

Ice cream mixes and frozen ice creams at milk fat levels of 12%, 8%, 6%, 6% plus a protein-based fat replacer, and 6% plus a carbohydrate-based fat replacer were evaluated for viscoelastic properties by dynamic testing with sinusoidal oscillatory tests at various frequencies. The storage modulus (G'), loss modulus (G"), and tan delta (G"/G') were calculated for all the treatments to determine changes in the viscous and elastic properties of the mixes and frozen ice creams due to fat content. In ice cream mixes, G' and G" exhibited a strong frequency dependence. The G" was higher than G' throughout the frequency range (1 to 8 Hz) examined, without any crossover, except for the 12% mix. Elastic properties of the ice cream mixes decreased as fat content decreased. Tan delta values indicated that fat replacers did not enhance the elastic properties of the ice cream mixes. In all frozen ice creams, G' and G" again showed a frequency dependence throughout the range tested (0.5 to 10 Hz). The amount of fat in ice creams and the degree of fat destabilization affected the elasticity in the frozen product. Even though the ice creams did not have significant elastic properties, when compared as a group the samples with higher fat content had higher elastic properties. The addition of protein-based and carbohydrate-based fat replacers did not enhance the elastic properties of the ice creams but did increase the viscous properties.

Esterified propoxylated glycerol soyate, a fat substitute model compound, and soy oil after heating

The changes occurring in two oil samples [EPG-00 soyate (transesterified soybean oil) and soy oil esterified propoxylated glycerol (EPG-08 soyate, a model, fat substitute compound)] were compared after heating at approximately 190 degrees C for 12 h/day. The EPG-00 soyate sample required 48 h of heating to attain a polymer content >20%, while the EPG-08 soyate required only 36 h. After 48 h of heating the EPG-00 soyate sample, the free fatty acid value (FFA) increased from 0.19 to 0.79, the acid value (AV) increased from 0.10 to 1.59, and the p-anisidine value (p-AV) increased from 1.6 to 195.4. In comparison, after only 36 h of heating, the EPG-08 soyate sample had FFA, AV, and p-AV increases from 0.19 to 0.71, from 0.26 to 1.36, and from 1.1 to 191.7, respectively. The triacylglycerol substrate degradation rate for EPG-00 soyate was k = 0.0126 +/- 0.0003 h(-)(1), while the rate for EPG-08 soyate was k = 0.0166 +/- 0.0017 h(-)(1). The results suggest that the EPG-00 soyate or transesterified soybean oil is slightly more stable than EPG-08 soyate.

Determination of fat in olestra-containing savory snack products by capillary gas chromatography

A quantitative method to determine fat in olestra-containing savory snack products was validated within the AOAC Peer-Verified Methods Program. The method may be used to demonstrate compliance with the guidelines of the U.S. Nutrition Labeling and Education Act for labeling products as "fat free" or "low fat." The method can measure total and saturated fat in savory snacks when present at levels of 0.2-10 g total fat and 0.1-3 g saturated fat per 30 g serving. The method is standardized to measure C6-C24 fatty acids. Extraction of olestra-containing savory snack samples with chloroform-methanol (modified AOAC Official Method 983.23) yields a lipid extract containing the total fat and olestra. The extracted lipid is hydrolyzed by lipase, yielding fatty acids and unreacted olestra. The fatty acids are precipitated as calcium soaps. Olestra is extracted from insoluble soaps with hexane and then discarded. The isolated soaps are converted back into fatty acids with hydrochloric acid and extracted with hexane. The isolated fatty acids are converted to methyl esters with boron trifluoride-methanol and quantitated by capillary gas chromatography using internal standard. Test samples were prepared by blending olestra-containing and full-fat (triglyceride) snacks to obtain 6 levels of spiking (0-10 g total fat added/30 g serving) in potato chips, potato crisps, cheese puffs, and nacho cheese-flavored corn chips. Results were linear (r2 > 0.997) between 0 and 10 g fat/30 g serving for each product matrix. Mean recovery was 101 +/- 6% standard deviation (SD) for total fat and 104 +/- 6% SD for saturated fat. Mean recovery by peer laboratory was 88 +/- 5% SD for total fat and 95 +/- 4% SD for saturated fat in potato chips (0-3 g total fat added/30 g serving). Two sets of 10 replicates of potato chips (0.5 g total fat/30 g serving and 0.16 g saturated fat/30 g serving) and potato crisps (0.5 g total fat/30 g serving and 0.16 g saturated fat/30 g serving) were analyzed by submitting and peer laboratories. Repeatability relative standard deviations ranged from 3.90 to 7.33% for total fat and from 4.01 to 11.53% for saturated fat. Reproducibility relative standard deviations were 7.33% (total fat, potato chips), 7.15% (total fat, potato crisps), 11.36% (saturated fat, potato chips), and 13.50% (saturated fat, potato crisps).

Sensory and physical properties of ice creams containing milk fat or fat replacers

The purpose of this research was to determine the relative effects of milk fat, nonfat milk solids, or each of three whey protein type fat replacers on the flavor and texture attributes of vanillin-flavored ice cream. Descriptive sensory analyses disclosed that ice creams containing 4.8% of any of the fat replacers in place of milk fat had no demonstrable effect on vanillin flavor but increased the intensities of whey flavor, syrup flavor, and cooked milk flavor. Compared with each substitute, milk fat significantly reduced the syrup, whey, and cooked milk flavors and increased the fresh milk and cream flavors of the ice cream. Results emphasized the importance of fat as a flavor modifier and the importance of certain fat replacers as aids in improving texture.