Salivary Biglycan-neo-epitope-BGN262: a novel surrogate biomarker for equine osteoarthritic sub-chondral bone sclerosis and to monitor the effect of short-term training and surface arena

Objective

We aimed to delineate a novel soluble Biglycan Neo-epitope-BGN262 in saliva from young reference and osteoarthritic horses in conjunction with the influence of short-term training exercise, riding surface hardness, circadian rhythm, and feeding on its soluble levels.

Design

A custom-made inhibition ELISA was used for the quantification of BGN262 in saliva. Cohort 1: A cross-sectional study comprising reference (N ​= ​19) and OA horses (N ​= ​9) with radiographically classified subchondral bone sclerosis. Receiver operating characteristic curve analysis was performed to evaluate the robustness of BGN262. Cohorts 2 (N ​= ​5) & 3 (N ​= ​7): Longitudinal studies of sampling during a short-term training exercise (sand-fibre) and a cross-over design of short-training exercise on 2 different riding arenas (sand and sand-fibre), respectively. Capillary western immunoassay was used to determine the BGN262 molecular size in a selection of saliva samples collected from cohort 1.

Results

Cohort 1: Salivary BGN262 levels were significantly higher in the OA group. The Receiver operating characteristic curve analysis showed an area under the curve of 0.8304 [0.6386 to 1.022], indicating a good separation from the reference group. Cohorts 2 & 3: Salivary BGN262 levels significantly changed during the exercise on sand and sand-fibre arena, with a trend towards higher levels for sand-fibre. The size of the BGN262 fragment determined by Capillary western assay was 18 ​kDa.

Conclusions

The data presented show saliva BGN262 levels as a novel biomarker in evaluating the influence of exercise, and interaction with riding arenas alongside assessing osteoarthritis severity.

Learning in lockdown: Using the COVID-19 crisis to teach children about food and climate change

Food systems are significant sources of global greenhouse gas emissions (GHGE). Since emission intensity varies greatly between different foods, changing food choices towards those with lower GHGE could make an important contribution to mitigating climate change. Public engagement events offer an opportunity to communicate these multifaceted issues and raise awareness about the climate change impact of food choices. An interdisciplinary team of researchers was preparing food and climate change educational activities for summer 2020. However, the COVID-19 pandemic and lockdown disrupted these plans. In this paper, we report on shifting these events online over the month of June 2020. We discuss what we did and the reception to our online programme. We then reflect on and highlight issues that arose. These relate to: (1) the power dynamics of children, diet and climate change; (2) mental health, diet and COVID-19; (3) engaging the wider science, agriculture and food communities; (4) the benefits of being unfunded and the homemade nature of this programme; (5) the food system, STEAM (science, technology, engineering, arts and mathematics) and diversity; and (6) how our work fits into our ongoing journey of food and climate change education.

Profiling of donor-specific immune effector signatures in response to rituximab in a human whole blood loop assay using blood from CLL patients

Rituximab is widely used in the treatment of haematological malignancies, including chronic lymphocytic leukaemia (CLL), the most common leukaemia in adults. However, some patients, especially those with high tumour burden, develop cytokine release syndrome (CRS). It is likely that more patients will develop therapy-linked CRS in the future due to the implementation of other immunotherapies, such as CAR T-cell, for many malignancies. Current methods for CRS risk assessment are limited, hence there is a need to develop new methods. To better recapitulate an in vivo setting, we implemented a unique human whole blood "loop" system to study patient-specific immune responses to rituximab in blood derived from CLL patients. Upon rituximab infusion, both complement-dependent cytotoxicity (CDC) and antibody-dependent cellular cytotoxicity (ADCC) profiles were evident in CLL patient blood, coincident with CLL cell depletion. Whereas B cell depletion is induced in healthy persons in the blood loop, only patients display B cell depletion coupled with CRS. With the exception of one donor who lacked NK cells, all other five patients displayed variable B cell depletion along with CRS profile. Additionally, inhibition of CDC or ADCC via either inhibitors or antibody Fc modification resulted in skewing of the immune killing mechanism consistent with published literature. Herein we have shown that the human whole blood loop model can be applied using blood from a specific indication to build a disease-specific CRS and immune activation profiling ex vivo system. Other therapeutic antibodies used for other indications may benefit from antibody characterization in a similar setting.

Inspection of thick welded joints using laser-ultrasonic SAFT

The detection of defects in thick butt joints in the early phase of multi-pass arc welding would be very valuable to reduce cost and time in the necessity of reworking. As a non-contact method, the laser-ultrasonic technique (LUT) has the potential for the automated inspection of welds, ultimately online during manufacturing. In this study, testing has been carried out using LUT combined with the synthetic aperture focusing technique (SAFT) on 25 and 50mm thick butt welded joints of steel both completed and partially welded. EDM slits of 2 or 3mm height were inserted at different depths in the multi-pass welding process to simulate a lack of fusion. Line scans transverse to the weld are performed with the generation and detection laser spots superimposed directly on the surface of the weld bead. A CCD line camera is used to simultaneously acquire the surface profile for correction in the SAFT processing. All artificial defects but also real defects are visualized in the investigated thick butt weld specimens, either completed or partially welded after a given number of passes. The results obtained clearly show the potential of using the LUT with SAFT for the automated inspection of arc welds or hybrid laser-arc welds during manufacturing.

Emergence of tan spot disease caused by toxigenic Pyrenophora tritici-repentis in Australia is not associated with increased deployment of toxin-sensitive cultivars

The wheat disease tan (or yellow leaf) spot, caused by Pyrenophora tritici-repentis, was first described in the period 1934 to 1941 in Canada, India, and the United States. It was first noted in Australia in 1953 and only became a serious disease in the 1970s. The emergence of this disease has recently been linked to the acquisition by P. tritici-repentis of the ToxA gene from the wheat leaf and glume blotch pathogen, Stagonospora nodorum. ToxA encodes a host-specific toxin that interacts with the product of the wheat gene Tsn1. Interaction of ToxA with the dominant allele of Tsn1 causes host necrosis. P. tritici-repentis races lacking ToxA give minor indistinct lesions on wheat lines, whereas wheat lines expressing the recessive tsn1 are significantly less susceptible to the disease. Although the emergence and spread of tan spot had been attributed to the adoption of minimum tillage practices, we wished to test the alternative idea that the planting of Tsn1 wheat lines may have contributed to the establishment of the pathogen in Australia. To do this, wheat cultivars released in Australia from 1911 to 1986 were tested for their sensitivity to ToxA. Prior to 1941, 16% of wheat cultivars were ToxA-insensitive and hence, all other factors being equal, would be more resistant to the disease. Surprisingly, only one of the cultivars released since 1940 was ToxA insensitive, and the area planted to ToxA-insensitive cultivars varied from 0 to a maximum of only 14% in New South Wales. Thus, the majority of the cultivars were ToxA-sensitive both before and during the period of emergence and spread of the disease. We therefore conclude that the spread of P. tritici-repentis in Australia cannot be causally linked to the deployment of ToxA-sensitive cultivars.

On-line measurement of texture, thickness and plastic strain ratio using laser-ultrasound resonance spectroscopy

Laser-ultrasound resonance spectroscopy, a non-contact ultrasonic technique, was used to determine reliably and rapidly the crystallographic texture, the average plastic strain ratio, and the thickness of sheet metal on the production line. As with laser-ultrasonics, a short laser pulse is used to generate a wide-band pulse of ultrasound and a laser interferometer is used for its detection. In this paper, a large number of echoes are collected and analyzed together using Fourier techniques to measure the natural resonance frequencies in the thickness of the sheet. One longitudinal and two shear resonance frequencies were measured together with their harmonics. From these frequencies, two crystallographic orientation distribution coefficients, W(400) and W(420), are obtained, as well as a highly accurate measurement of the sheet thickness that is corrected for changes in ultrasonic velocity caused by texture variations. Using these coefficients, the average and in-plane twofold and fourfold variations of the plastic strain ratio, respectively r delta(2)r, and delta(4)r, can be evaluated. These parameters are indications of the formability of metals sheets, which is of industrial interest. Measurements on 1 mm thick, low carbon steel sheets have shown the following measurement accuracies: r to within +/-0.08, delta(2)r, and delta(4)r to within +/-0.1, and thickness to better than +/-1 microm. On-line tests at LTV Steel Company showed that the sensitivity of the apparatus is sufficient to detect systematic variations in texture along the length of similar production coils and that the on-line repeatability for r was of order +/-0.02.

NMR studies of the sporulation protein SpoIIAA: implications for the regulation of the transcription factor sigmaF in Bacillus subtilis

SpoIIAA participates in a four-component mechanism for phosphorylation-dependent transcription control at the outset of sporulation. We report the refinement of the solution structure of SpoIIAA by using the automated iterative NOE assignment method ARIA. To complement the structural data, the protein dynamics were determined by measuring the T1, T2 and NOE of the backbone 15N-nuclei. The refined structure permits a discussion of the structural features that are important for the function of SpoIIAA in the regulation of the sporulation sigma factor sigmaF, and for homologous regulatory pathways present in B. subtilis and in other bacilli.

Multigenerational cortical inheritance of the Rax2 protein in orienting polarity and division in yeast

Diploid yeast cells repeatedly polarize and bud from their poles, probably because of highly stable marks of unknown composition. Here, Rax2, a membrane protein, was shown to behave as such a mark. The Rax2 protein itself was inherited immutably at the cell cortex for multiple generations, and Rax2 was shown to have a half-life exceeding several generations. The persistent inheritance of cortical protein markers would provide a means to couple a cell's history to the future development of a precise morphogenetic form.

A study of in-shoe plantar shear in patients with diabetic neuropathy

OBJECTIVE

To quantify in-shoe plantar shear in diabetic neuropathic feet.

DESIGN

Plantar shear stresses are measured in a group of six patients with a history of diabetic neuropathic ulceration.

BACKGROUND

Although elevated pressure between foot and shoe frequently found in diabetic neuropathic patients has been linked to a raised incidence of plantar ulceration, the shear component of stress at this interface is as yet unquantified. It is suggested that its effects may be equally damaging.

METHODS

Measurements of shear were made locally beneath the medial four metatarsal heads and heel during unpaced gait in orthopaedic footwear, using a bi-axial magneto-resistive shear transducer. Similar methodology was previously employed on a group of asymptomatic adults, thereby allowing comparisons to be made.

RESULTS

Overall the maximum shear stress for this patient group (73 kPa) was not significantly different to that in the asymptomatic group (87 kPa). However the patient group exhibited lower magnitudes of shear stress under the third/fourth metatarsal heads (average 51/39 vs. 86.5/71 kPa, respectively) and higher magnitudes under the first/second heads (73/64 vs. 35/31 kPa, respectively), indicating a medial shift. Step-to-step variability of maximum shear measured under the third metatarsal head showed an increase in the transverse component (coefficient of reliability 67% vs. 98%).

CONCLUSIONS

Although the overall patterns of shear are broadly similar to the asymptomatic group, these pilot trials indicate a medial shift in shear loading under the forefoot coupled to increased step-to-step variability in the diabetic group. RelevanceMechanical stress at the plantar interface between foot and shoe is of particular clinical relevance to the formation and management of ulcers in diabetic neuropathy. Whereas the pressure component of stress is widely studied, the shear component is poorly described although it may be of equal importance.