Mirror-image antiparallel β-sheets organize water molecules into superstructures of opposite chirality

Biomolecular hydration is fundamental to biological functions. Using phase-resolved chiral sum-frequency generation spectroscopy (SFG), we probe molecular architectures and interactions of water molecules around a self-assembling antiparallel β-sheet protein. We find that the phase of the chiroptical response from the O-H stretching vibrational modes of water flips with the absolute chirality of the (l-) or (d-) antiparallel β-sheet. Therefore, we can conclude that the (d-) antiparallel β-sheet organizes water solvent into a chiral supermolecular structure with opposite handedness relative to that of the (l-) antiparallel β-sheet. We use molecular dynamics to characterize the chiral water superstructure at atomic resolution. The results show that the macroscopic chirality of antiparallel β-sheets breaks the symmetry of assemblies of surrounding water molecules. We also calculate the chiral SFG response of water surrounding (l-) and (d-) LK₇β to confirm the presence of chiral water structures. Our results offer a different perspective as well as introduce experimental and computational methodologies for elucidating hydration of biomacromolecules. The findings imply potentially important but largely unexplored roles of water solvent in chiral selectivity of biomolecular interactions and the molecular origins of homochirality in the biological world.

Interfacial Speciation Determines Interfacial Chemistry: X-ray-Induced Lithium Fluoride Formation from Water-in-salt Electrolytes on Solid Surfaces

Super-concentrated "water-in-salt" electrolytes recently spurred resurgent interest for high energy density aqueous lithium-ion batteries. Thermodynamic stabilization at high concentrations and kinetic barriers towards interfacial water electrolysis significantly expand the electrochemical stability window, facilitating high voltage aqueous cells. Herein we investigated LiTFSI/H2 O electrolyte interfacial decomposition pathways in the "water-in-salt" and "salt-in-water" regimes using synchrotron X-rays, which produce electrons at the solid/electrolyte interface to mimic reductive environments, and simultaneously probe the structure of surface films using X-ray diffraction. We observed the surface-reduction of TFSI- at super-concentration, leading to lithium fluoride interphase formation, while precipitation of the lithium hydroxide was not observed. The mechanism behind this photoelectron-induced reduction was revealed to be concentration-dependent interfacial chemistry that only occurs among closely contact ion-pairs, which constitutes the rationale behind the "water-in-salt" concept.

Interaction of α-Synuclein with Phospholipids and the Associated Restructuring of Interfacial Lipid Water: An Interface-Selective Vibrational Spectroscopic Study

Interaction of α-Synuclein (αS) with biological lipids is crucial for the onset of its fibrillation at the cell membrane/water interface. Probed herein is the interaction of αS with membrane-mimicking lipid monolayer/water interfaces. The results depict that αS interacts negligibly with zwitterionic lipids, but strongly affects the pristine air/water and charged lipid/water interfaces by perturbing the structure and orientation of the interfacial water. The net negative αS (-9 in bulk water; pH 7.4) reorients the water as hydrogen-up (H-up) at the air/water interface, and electrostatically interacts with positively charged lipids, making the interface nearly net neutral. αS also interacts with negatively charged lipids: the net H-up orientation of the interfacial water decreases at the anionic lipid/water interface, revealing a domain-specific interaction of net negative αS with the negatively charged lipids at the membrane surface.

Structural Quality and Magnetotransport Properties of Epitaxial Layers of the (Ga,Mn)(Bi,As) Dilute Magnetic Semiconductor

Structural analysis of epitaxial layers of the (Ga,Mn)(Bi,As) quaternary dilute magnetic semiconductor (DMS), together with investigations of their magnetotransport properties, has been thoroughly performed. The obtained results are compared with those for the reference (Ga,Mn)As layers, grown under similar conditions, with the aim to reveal an impact of Bi incorporation on the properties of this DMS material. Incorporation of Bi into GaAs strongly enhances the spin-orbit coupling strength in this semiconductor, and the same has been expected for the (Ga,Mn)(Bi,As) alloy. In turn, importantly for specific spintronic applications, strong spin-orbit coupling in ferromagnetic systems opens a possibility of directly controlling the direction of magnetization by the electric current. Our investigations, performed with high-resolution X-ray diffractometry and transmission electron microscopy, demonstrate that the (Ga,Mn)(Bi,As) layers of high structural quality and smooth interfaces can be grown by means of the low-temperature molecular-beam epitaxy method, despite a large difference between the sizes of Bi and As atoms. Depending on the applied buffer layer, the DMS layers can be grown under either compressive or tensile misfit strain, which influences their magnetic properties. It is shown that even small 1% Bi content in the layers strongly affects their magnetoelectric properties, such as the coercive field and anisotropic magnetoresistance.

Protein corona formed in the gastrointestinal tract and its impacts on oral delivery of nanoparticles

The interaction of nanoparticles (NPs) with proteins and the formation of protein corona in the biological fluids are of great interest and significance for drug delivery. In the past decade, the corona formation in the blood and its impacts on the in vitro and in vivo fate of NPs has been well investigated and reviewed. Recently, more and more attention is paid to the nano-protein interactions taking place in the gastrointestinal tract (GIT) between the orally administered NPs and the digestive enzymes. The enzyme corona formed in the GIT can significantly affect the properties, gastrointestinal transit, and oral absorption of NPs. Since oral delivery is the most preferred delivery route, comprehensively understanding the corona formation in the GIT and its impacts on oral delivery NPs are of great importance. Herein, we aim to summarize the recent updates on the nano-protein interactions between NPs and digestive enzymes, and launch an interesting discussion on the potentials of using the digestive enzyme corona for the colon targeted delivery.

Understanding the Complex Surface Interplay for Extraction: A Molecular Dynamics Study

By means of classical molecular dynamics simulation the interfacial properties of methanol and n‐dodecane, which are two potential candidate solvents for use in non‐aqueous liquid–liquid extraction, were assessed. The question of how the interface changes depending on the concentration of extractant (tri‐n‐butyl phosphate) and salt (LiCl) is addressed. Two different models to represent systems were used to evaluate how LiCl and tri‐n‐butyl phosphate affect mutual miscibility, and how the last‐named behaves depending on the chemical environment. Tri‐n‐butyl phosphate increases the mutual solubility of the solvents, whereas LiCl counteracts it. The extractant was found to be mostly adsorbed on the interface between the solvents, and therefore the structural features of the adsorption were investigated. Adsorption of tri‐n‐butyl phosphate changes depending on its concentration and the presence of LiCl. It exhibits a preferential orientation in which the butyl chains point at the n‐dodecane phase and the phosphate group points at the methanol phase. For high concentrations of tri‐n‐butyl phosphate, its molecular orientation is preserved by diffusion of the excess molecules into both the methanol and n‐dodecane phases. However, LiCl hinders the diffusion into the methanol phase, and thus increases the concentration of tri‐n‐butyl phosphate at the interface and forces a rearrangement with subsequent loss of orientation.

Bottom Contact Metal Oxide Interface Modification Improving the Efficiency of Organic Light Emitting Diodes

The performance of solution-processed organic light emitting diodes (OLEDs) is often limited by non-uniform contacts. In this work, we introduce Ni-containing solution-processed metal oxide (MO) interfacial layers inserted between indium tin oxide (ITO) and poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) to improve the bottom electrode contact for OLEDs using the poly(p-phenylene vinylene) (PPV) derivative Super-Yellow (SY) as an emission layer. For ITO/Ni-containing MO/PEDOT:PSS bottom electrode structures we show enhanced wetting properties that result in an improved OLED device efficiency. Best performance is achieved using a Cu-Li co-doped spinel nickel cobaltite [(Cu-Li):NiCo₂O₄], for which the current efficiency and luminous efficacy of SY OLEDs increased, respectively, by 12% and 11% from the values obtained for standard devices without a Ni-containing MO interface modification between ITO and PEDOT:PSS. The enhanced performance was attributed to the improved morphology of PEDOT:PSS, which consequently increased the hole injection capability of the optimized ITO/(Cu-Li):NiCo₂O₄/PEDOT:PSS electrode.

Surface Architecture Design of LiNi0.8 Co0.15 Al0.05 O2 Cathode with Synergistic Organics Encapsulation to Enhance Electrochemical Stability

Ni-rich LiNi_0.8 Co_0.15 Al_0.05 O₂ (NCA) material attracts extensive attention due to its high discharge specific capacity, but its distinct drawbacks of rapid capacity decline and poor cycle performance at elevated temperatures and high voltage during charge/discharge cycling restricts its widespread application. To solve these problems, a multifunctional coating layer composed of a lithium-ion-conductive lithium polyacrylate (LiPAA) inner layer and a cross-linked polymer outer layer from certain organic substances of silane-coupling agent (KH550) and polyacrylic acid (PAA) is successfully designed on the surface of NCA materials, which is favorable for eliminating residual lithium and improving lithium-ion conductivity, surface stability, and hydrophobicity of NCA materials. In addition, the amount of the coating material is also investigated. A series of characterization methods such as XRD, FTIR, SEM, TEM, and X-ray photoelectron spectroscopy are used to analyze the morphologies and structures for materials of pristine and modified NCA. It is revealed that the co-coating layer plays a vital part in reducing the surface residual alkalis and improving the stability of NCA particles; as a result, the modified NCA exhibits a greatly improved rate capability, cycle performance, and low polarization impedance.

Collar E. On the Combined Effect of Both the Reinforcement and a Waste Based Interfacial Modifier on the Matrix Glass Transition in iPP/a-PP-pPBMA/Mica Composites

This work deals with the changes of the glass transition temperature (T_g) of the polymer in polypropylene/mica composites due to the combined and synergistic effect of the reinforcement and the interfacial modifier. In our case, we studied the effect on T_g of platy mica and an interfacial modifier with p-phenylen-bis-maleamic acid (pPBMA) grafted groups onto atactic polypropylene (aPP-pPBMA). This one contains 5.0 × 10^-4 g·mol^-1 (15% w/w) grafted pPBMA and was previously obtained by the author's labs by using industrial polymerization wastes (aPP). The objective of the article must be perceived as two-fold. On one hand, the determination of the changes in the glass transition temperature of the isotactic polypropylene phase (iPP) due to both the reinforcement and the agent as determined form the damp factor in DMA analysis. On the other hand, forecasting the variation of this parameter (T_g) as a function of both the interfacial agent and reinforcement content. For such purposes, and by assuming the complex character of the iPP/aPP-pPBMA/Mica system, wherein interaction between the components will define the final behaviour, a Box-Wilson experimental design considering the amount of mica particles and of interface agent as the independent variables, and the T_g as the dependent one, has been used. By taking in mind that the glass transition is a design threshold for the ultimate properties of parts based in this type of organic-inorganic hybrid materials, the final purpose of the work is the prediction and interpretation of the effect of both variables on this key parameter.

Evolution of Corrosion Products Formed during the Corrosion of MgZr Alloy in Poral Solutions Extracted from Na-Geopolymers Used as Conditioning Matrix for Nuclear Waste

Geopolymer, a nanoporous aluminosilicate filled with water and ions, has been selected as a potential matrix to encapsulate MgZr alloy fuel cladding. In this study, we investigate the evolution of the corrosion products formed during the corrosion of MgZr in poral solutions extracted from geopolymers with and without NaF as corrosion inhibitor. Using various characterization techniques such as Scanning Electron and Scanning Transmission Electron Microscopies coupled to Energy Dispersive X-ray spectroscopy and Grazing Incidence X-ray Diffraction, we show that the amounts of dissolved silica and fluoride species in solution are the key parameters driving the nature of corrosion products and probably their passivating properties regarding MgZr corrosion.

Spontaneous Relaxation of Heteroepitaxial Thin Films by van der Waals-Like Bonding on Te-Terminated Sapphire Substrates

Here the novel direct heteroepitaxial growth method of a 3D heteroepitaxial system is demonstrated on a 3D substrate, CdTe (111)/Al₂ O₃ (0001), which forms a spontaneous vdW-like bond at the interface, instead of the two 3D crystals being strongly bound. Despite a large lattice mismatch, the thin films are single crystals and maintain high quality due the compliance of the interface which accommodates strain. This weak bonding interface is accomplished by the self-assembly of a pseudomorphic chalcogenide layer on the sapphire surface during growth. Since the vdW-like interface forms spontaneously in situ during growth, it is easily scalable to large wafer sizes, without the need to layer transfer 2D materials onto the growth substrate for remote epitaxy. Further, the weak adhesion of the films on the substrates allow for epitaxial film transfer to a variety of other substrates, leaving the original growth substrate for future reuse. This type of 3D/3D vdW-like interface is exploitable as a compliant interlayer for additional epitaxy, and may even be observable directly in other material systems grown on complex oxides, allowing for the production of large area high quality freestanding and layer transferred epitaxial devices for material systems not currently possible by conventional processing techniques.

Tuning Rate-Limiting Factors to Achieve Ultrahigh-Rate Solid-State Sodium-Ion Batteries

Exhibiting superior safety features and low costs, solid-state sodium (Na)-ion batteries have been proposed as an attractive candidate for energy storage. However, the poor rate capability of solid-state batteries has limited their applications. In this work, an all-solid-state Na-ion battery is fabricated, delivering an unprecedented rate capability (60% capacity retention at a C-rate of 100 C with an areal loading of 1.5 mg cm^-2), which far exceeds other reports so far. More importantly, it is further demonstrated that instead of the Na-ion conductivity of the solid electrolyte, the rate-limiting factors are determined to be charge-transfer resistance at electrode/solid electrolyte interfaces and lack of percolation pathways in the electrode, which can be optimized by tuning the electrode design and testing protocols.

Photochromic Behavior of ZnO/MoO3 Interfaces

ZnO/MoO₃ powder mixture exhibits a huge photochromic effect in comparison with the corresponding single oxides. The coloring efficiency of such combined material after UV-light irradiation was studied in terms of intensity, kinetics, and ZnO/MoO₃ powder ratio. Additionally, the incidence of the pretreatment step of the ZnO and MoO₃ powders under different atmospheres (air, Ar or Ar/H₂ flow) was analyzed. The huge photochromic effect discovered herein was interpreted as the creation of "self-closed Schottky barrier" at the solid/solid interfaces between the two oxides, associated with the full redox reaction which can be pictured by the equation ZnO_1-ε + MoO₃ → ZnO + MoO_3-ε. Remarkable optical contrast between virgin and color states as well as self-bleaching in dark allowing the reversibility of the photochromism is emphasized. From this first discovery, deeper characterization of the self-bleaching process shows that the photochromic mechanism is complex with a bleaching efficiency (possibility to come back to the virgin material optical properties without any deterioration) and a bleaching kinetics, which are both dependent on the coloring irradiation time. This demonstrates that the oxygen exchange through the Schottky interface proceeds in at least two convoluted steps: an anionic surface exchange allowing a reversibility of the redox reaction followed by bulk diffusion of the exchanged anions which are then definitively trapped. An emergent "negative photochromism effect" (i.e., photochromism associated with a self-bleaching instead of a darkening under irradiation) is observed after a long irradiation time.

Stiffness of the interface between a colloidal body-centered cubic crystal and its liquid

Equilibrium interfaces were established between body-centered cubic (BCC) crystals and their liquid using charged colloidal particles in an electric bottle. By measuring a time series of interfacial positions and computing the average power spectrum, their interfacial stiffness was determined according to the capillary fluctuation method. For the (100) and the (114) interfaces, the stiffnesses were 0.15 and 0.18 [Formula: see text] (σ: particle diameter), respectively, and were isotropic in the plane of the interface. For comparison, similar charged colloids were used to create an interface between a face-centered cubic (FCC) crystal and its liquid. Its stiffness was significantly larger: 0.26 [Formula: see text] This result gives experimental support to the explanations offered for the preferential nucleation of BCC over FCC in metallic alloys.

Interplay of Topological States on TI/TCI Interfaces

Based on first-principles calculations, we study electronic structure of interfaces between a Z2 topological insulator (TI) SnBi2Te4 and a topological crystalline insulator (TCI) SnTe. We consider two interface models characterized by the different atomic structure on the contact of the SnTe(111) and SnBi2Te4(0001) slabs: the model when two materials are connected without intermixing (abrupt type of interface) and the interface model predicted to be realized at epitaxial immersion growth on topological insulator substrates (smooth interface). We find that a strong potential gradient at the abrupt interface leads to the redistribution of the topological states deeper from the interface plane which prevents the annihilation of the Γ¯ Dirac states, predicted earlier. In contrast, a smooth interface is characterized by minor charge transfer, which promotes the strong interplay between TI and TCI Γ¯ Dirac cones leading to their complete annihilation.The M¯ topologically protected Dirac state of SnTe(111) survives irrespective of the interface structure.

Water Freezes at Near-Zero Temperatures Using Carbon Nanotube-Based Electrodes under Static Electric Fields

Although static electric fields have been effective in controlling ice nucleation, the highest freezing temperature (T_f) of water that can be achieved in an electric field (E) is still uncertain. We performed a systematic study of the effect of an electric field on water freezing by varying the thickness of a dielectric layer and the voltage across it in an electrowetting system. Results show that T_f first increases sharply with E and then reaches saturation at -3.5 °C after a critical value E of 6 × 10⁶ V/m. Using classical heterogeneous nucleation theory, it is revealed that this behavior is due to saturation in the contact angle of the ice embryo with the underlying substrate. Finally, we show that it is possible to overcome this freezing saturation by controlling the uniformity of the electric field using carbon nanotubes. We achieve a T_f of -0.6 °C using carbon nanotube-based electrodes with an E of 3 × 10⁷ V/m. This work sheds new light on the control of ice nucleation and has the potential to impact many applications ranging from food freezing to ice production.

Studying dynamics without explicit dynamics: A structure-based study of the export mechanism by AcrB

Resistance-nodulation-cell division family proteins are transmembrane proteins identified as large spectrum drug transporters involved in multidrug resistance. A prototypical case in this superfamily, responsible for antibiotic resistance in selected gram-negative bacteria, is AcrB. AcrB forms a trimer using the proton motive force to efflux drugs, implementing a functional rotation mechanism. Unfortunately, the size of the system (1049 amino acid per monomer and membrane) has prevented a systematic dynamical exploration, so that the mild understanding of this coupled transport jeopardizes our ability to counter it. The large number of crystal structures of AcrB prompts studies to further our understanding of the mechanism. To this end, we present a novel strategy based on two key ingredients, which are to study dynamics by exploiting information embodied in the numerous crystal structures obtained to date, and to systematically consider subdomains, their dynamics, and their interactions. Along the way, we identify the subdomains responsible for dynamic events, refine the states (A, B, E) of the functional rotation mechanism, and analyze the evolution of intramonomer and intermonomer interfaces along the functional cycle. Our analysis shows the relevance of AcrB's efflux mechanism as a template within the HAE1 family but not beyond. It also paves the way to targeted simulations exploiting the most relevant degrees of freedom at certain steps, and to a targeting of specific interfaces to block the drug efflux. Our work shows that complex dynamics can be unveiled from static snapshots, a strategy that may be used on a variety of molecular machines of large size.

Atomic-Scale Model and Electronic Structure of Cu2O/CH3NH3PbI3 Interfaces in Perovskite Solar Cells

Cuprous oxide has been conceived as a potential alternative to traditional organic hole-transport layers in hybrid halide perovskite-based solar cells. Device simulations predict record efficiencies using this semiconductor, but experimental results do not yet show this trend. More detailed knowledge about the Cu₂O/perovskite interface is mandatory to improve the photoconversion efficiency. Using density functional theory calculations, here, we study the interfaces of CH₃NH₃PbI₃ with Cu₂O to assess their influence on device performance. Several atomistic models of these interfaces are provided for the first time, considering different compositions of the interface atomic planes. The interface electronic properties are discussed on the basis of the optimal theoretical situation, but in connection with the experimental realizations and device simulations. It is shown that the formation of vacancies in the Cu₂O terminating planes is essential to eliminate dangling bonds and trap states. The four interface models that fulfill this condition present a band alignment favorable for photovoltaic conversion. Energy of adhesion and charge transfer across the interfaces are also studied. The termination of CH₃NH₃PbI₃ in PbI₂ atomic planes seems optimal to maximize the photoconversion efficiency.

Cyclic Expansion/Compression of the Air-Liquid Interface as a Simple Method to Produce Silk Fibers

Self-assembly of recombinant spider silk protein at air-liquid interfaces is used as a starting point to produce homogeneous fiber bundles. The film that is formed on a silk protein solution in a vertically placed syringe is subjected to repeated controlled extension and compression by an oscillating vertical motion. Thereby, a precise breakup of the film can be achieved, followed by transport and roll-up against the syringe wall prior to extraction. Advantages of the method are that it 1) is simple to use; 2) requires a small volume of protein solution (1 mL) at relatively low concentration (1 mg mL^-1 ); 3) can be performed under sterile conditions; 4) does not require any use of coagulants; and 5) is compatible with the addition of viable cells during the process, which thereby are integrated uniformly throughout the fiber.

Self-Metalation of Anchored Porphyrins on Atomically Defined Cobalt Oxide Surfaces: In situ Studies by Surface Vibrational Spectroscopy

Metalation of anchored porphyrins is essential for their functionality at hybrid interfaces. In this work, we have studied the anchoring and metalation of a functionalized porphyrin derivative, 5-(4-carboxyphenyl)-10,15,20-triphenylporphyrin (MCTPP), on an atomically-defined CoO(100) film under ultrahigh vacuum (UHV) conditions. We follow both the anchoring to the oxide surface and the self-metalation by surface Co2+ ions via infrared reflection absorption spectroscopy (IRAS). At 150 K, MCTPP multilayer films adsorb molecularly on CoO(100) without anchoring to the surface. Upon heating to 195 K, the first layer of porphyrin molecules anchors via formation of a bridging surface carboxylate. Above 460 K, the MCTPP multilayer desorbs and only the anchored monolayer resides on the surface up to temperatures of 600 K approximately. The orientation of anchored MCTPP depends on the surface coverage. At low coverage, the MCTPP adopts a nearly flat-lying geometry, whereas an upright standing film is formed near the multilayer coverage. Self-metalation of MCTPP depends critically on the surface temperature, the coverage and on the molecular orientation. At 150 K, metalation is largely suppressed, while the degree of metalation increases with increasing temperature and reaches a value of around 60 % in the first monolayer at 450 K. At lower coverage higher metalation fractions (85 % and above) are observed, similar as for increasing temperature.

Lignin-Inorganic Interfaces: Chemistry and Applications from Adsorbents to Catalysts and Energy Storage Materials

Lignin is one the most fascinating natural polymers due to its complex aromatic-aliphatic structure. Phenolic hydroxyl and carboxyl groups along with other functional groups provide technical lignins with reactivity and amphiphilic character. Many different lignins have been used as functional agents to facilitate the synthesis and stabilization of inorganic materials. Herein, the use of lignin in the synthesis and chemistry of inorganic materials in selected applications with relevance to sustainable energy and environmental fields is reviewed. In essence, the combination of lignin and inorganic materials creates an interface between soft and hard materials. In many cases it is either this interface or the external lignin surface that provides functionality to the hybrid and composite materials. This Minireview closes with an overview on future directions for this research field that bridges inorganic and lignin materials for a more sustainable future.

Competitive Salt Precipitation/Dissolution During Free-Water Reduction in Water-in-Salt Electrolyte

Water-in-salt electrolytes based on highly concentrated bis(trifluoromethyl)sulfonimide (TFSI) promise aqueous electrolytes with stabilities nearing 3 V. However, especially with an electrode approaching the cathodic (reductive) stability, cycling stability is insufficient. While stability critically relies on a solid electrolyte interphase (SEI), the mechanism behind the cathodic stability limit remains unclear. Now, two distinct reduction potentials are revealed for the chemical environments of free and bound water and that both contribute to SEI formation. Free water is reduced about 1 V above bound water in a hydrogen evolution reaction (HER) and is responsible for SEI formation via reactive intermediates of the HER; concurrent LiTFSI precipitation/dissolution establishes a dynamic interface. The free-water population emerges, therefore, as the handle to extend the cathodic limit of aqueous electrolytes and the battery cycling stability.

Plasmonic Metallic Heteromeric Nanostructures

Binary, ternary, and other high-order plasmonic heteromers possess remarkable physical and chemical properties, enabling them to be used in numerous applications. The seed-mediated approach is one of the most promising and versatile routes to produce plasmonic heteromers. Selective growth of one or multiple domains on desired sites of noble metal, semiconductor, or magnetic seeds would form desired heteromeric nanostructures with multiple functionalities and synergistic effects. In this work, the challenges for the synthetic approaches are discussed with respect to tuning the thermodynamics, as well as the kinetic properties (e.g., pH, temperature, injection rate, among others). Then, plasmonic heteromers with their structure advantages displaying unique activities compared to other hybrid nanostructures (e.g., core-shell, alloy) are highlighted. Some of the main most recent applications of plasmonic heteromers are also presented. Finally, perspectives for further exploitation of plasmonic heteromers are demonstrated. The goal of this work is to provide the current know-how on the synthesis routes of plasmonic heteromers in a summarized manner, so as to achieve a better understanding of the resulting properties and to gain an improved control of their performances and extend their breadth of applications.

Characterization and Electronic Properties of Heptazine Layers: Towards Promising Interfacial Materials for Organic Optoelectronics

For the first time, an original compound belonging to the heptazine family has been deposited in the form of thin layers, both by thermal evaporation under vacuum and spin-coating techniques. In both cases, smooth and homogeneous layers have been obtained, and their properties evaluated for eventual applications in the field of organic electronics. The layers have been fully characterized by several concordant techniques, namely UV-visible spectroscopy, steady-state and transient fluorescence in the solid-state, as well as topographic and conductive atomic force microscopy (AFM) used in Kelvin probe force mode (KPFM). Consequently, the afferent energy levels, including Fermi level, have been determined, and show that these new heptazines are promising materials for tailoring the electronic properties of interfaces associated with printed electronic devices. A test experiment showing an improved electron transfer rate from a tris-(8-hydroxyquinoline) aluminum (Alq3) photo-active layer in presence of a heptazine interlayer is finally presented.

3D Printing of Continuous Fiber Reinforced Low Melting Point Alloy Matrix Composites: Mechanical Properties and Microstructures

A novel 3D printing route to fabricate continuous fiber reinforced metal matrix composite (CFRMMC) is proposed in this paper. It is distinguished from the 3D printing process of polymer matrix composite that utilizes the pressure inside the nozzle to combine the matrix with the fiber. This process combines the metallic matrix with the continuous fiber by utilizing the wetting and wicking performances of raw materials to form the compact internal structures and proper fiber-matrix interfaces. CF/Pb50Sn50 composites were printed with the Pb50Sn50 alloy wire and modified continuous carbon fiber. The mechanical properties of the composite specimens were studied, and the ultimate tensile strength reached 236.7 MPa, which was 7.1 times that of Pb50Sn50 alloy. The fracture and interfacial microstructure were investigated and analyzed. The relationships between mechanical properties and interfacial reactions were discussed. With the optimized process parameters, several composites parts were printed to demonstrate the advantages of low cost, short fabrication period and flexibility in fabrication of complex structures.