Ionic-Liquid-Assisted Synthesis of Mixed-Phase Manganese Oxide Nanorods for a High-Performance Aqueous Zinc-Ion Battery

Aqueous zinc-ion batteries (ZIBs) provide a safer and cost-effective energy storage solution by utilizing nonflammable water-based electrolytes. Although many research efforts are focused on optimizing zinc anode materials, developing suitable cathode materials is still challenging. In this study, one-dimensional, mixed-phase MnO₂ nanorods are synthesized using ionic liquid (IL). Here, the IL acts as a structure-directing agent that modifies MnO₂ morphology and introduces mixed phases, as confirmed by morphological, structural, and X-ray photoelectron spectroscopy (XPS) studies. The MnO₂ nanorods developed by this method are utilized as a cathode material for ZIB application in the coin-cell configuration. As expected, Zn//MnO₂ nanorods show a significant increase in their capacity to 347 Wh kg^-1 at 100 mA g^-1, which is better than bare MnO₂ nanowires (207.1 Wh kg^-1) synthesized by the chemical precipitation method. The battery is highly rechargeable and maintains good retention of 86% of the initial capacity and 99% Coulombic efficiency after 800 cycles at 1000 mA g^-1. The ex situ XPS, X-ray diffraction, and in-depth electrochemical analysis confirm that MnO₆ octahedra experience insertion/extraction of Zn²⁺ with high reversibility. This study suggests the potential use of MnO₂ nanorods to develop high-performance and durable battery electrode materials suitable for large-scale applications.

Photoelectrochemical Green Hydrogen Production Utilizing ZnO Nanostructured Photoelectrodes

One of the emerging and environmentally friendly technologies is the photoelectrochemical generation of green hydrogen; however, the cheap cost of production and the need for customizing photoelectrode properties are thought to be the main obstacles to the widespread adoption of this technology. The primary players in hydrogen production by photoelectrochemical (PEC) water splitting, which is becoming more common on a worldwide basis, are solar renewable energy and widely available metal oxide based PEC electrodes. This study attempts to prepare nanoparticulate and nanorod-arrayed films to better understand how nanomorphology can impact structural, optical, and PEC hydrogen production efficiency, as well as electrode stability. Chemical bath deposition (CBD) and spray pyrolysis are used to create ZnO nanostructured photoelectrodes. Various characterization methods are used to investigate morphologies, structures, elemental analysis, and optical characteristics. The crystallite size of the wurtzite hexagonal nanorod arrayed film was 100.8 nm for the (002) orientation, while the crystallite size of nanoparticulate ZnO was 42.1 nm for the favored (101) orientation. The lowest dislocation values for (101) nanoparticulate orientation and (002) nanorod orientation are 5.6 × 10^-4 and 1.0 × 10^-4 dislocation/nm², respectively. By changing the surface morphology from nanoparticulate to hexagonal nanorod arrangement, the band gap is decreased to 2.99 eV. Under white and monochromatic light irradiation, the PEC generation of H₂ is investigated using the proposed photoelectrodes. The solar-to-hydrogen conversion rate of ZnO nanorod-arrayed electrodes was 3.72% and 3.12%, respectively, under 390 and 405 nm monochromatic light, which is higher than previously reported values for other ZnO nanostructures. The output H₂ generation rates for white light and 390 nm monochromatic illuminations were 28.43 and 26.11 mmol.h^-1cm^-2, respectively. The nanorod-arrayed photoelectrode retains 96.6% of its original photocurrent after 10 reusability cycles, compared to 87.4% for the nanoparticulate ZnO photoelectrode. The computation of conversion efficiencies, H₂ output rates, Tafel slope, and corrosion current, as well as the application of low-cost design methods for the photoelectrodes, show how the nanorod-arrayed morphology offers low-cost, high-quality PEC performance and durability.

Unravelling Dynamics Involving Multiple Charge Carriers in Semiconductor Nanocrystals

The use of colloidal nanocrystals as part of artificial photosynthetic systems has recently gained significant attention, owing to their strong light absorption and highly reproducible, tunable electronic and optical properties. The complete photocatalytic conversion of water to its components is yet to be achieved in a practically suitable and commercially viable manner. To complete this challenging task, we are required to fully understand the mechanistic aspects of the underlying light-driven processes involving not just single charge carriers but also multiple charge carriers in detail. This review focuses on recent progress in understanding charge carrier dynamics in semiconductor nanocrystals and the influence of various parameters such as dimension, composition, and cocatalysts. Transient absorption spectroscopic studies involving single and multiple charge carriers, and the challenges associated with the need for accumulation of multiple charge carriers to drive the targeted chemical reactions, are discussed.

One-Dimensional Mn5Si3 Nanorods: Fabrication, Microstructure, and Magnetic Properties via a Novel Casting-Extraction Route

This study presents a simple and innovative approach for producing one-dimensional Mn₅Si₃ nanorods through a casting-extraction process. In this technique, the Mn₅Si₃ nanorods were synthesized by reacting Mn and Si during brass solidification and extracted by electrochemical etching of the brass matrix. The effect of the cooling rate during casting on the nanorods' dimension, morphology, and magnetic properties was investigated. The results demonstrate that the prepared high-purity Mn₅Si₃ nanorods had a single-crystal D8₈ structure and exhibited ferromagnetism at room temperature. The morphology of the nanorods was an elongated hexagonal prism, and their preferred growth was along the [0001] crystal direction. Increasing the cooling rate from 5 K/s to 50 K/s lead to a decrease in the dimension of the nanorods but an increase in their ferromagnetism. At the optimal cooling rate of 50 K/s, the nanorods had a diameter and length range of approximately 560 nm and 2~11 μm, respectively, with a highest saturation magnetization of 7.5 emu/g, and a maximum coercivity of 120 Oe. These properties make the fabricated Mn₅Si₃ nanorods potentially useful for magnetic storage applications, and this study also provides a new perspective on the preparation of one-dimensional nanomaterials.

Multiple Valence Bands Convergence and Localized Lattice Engineering Lead to Superhigh Thermoelectric Figure of Merit in MnTe

MnTe has been considered a promising candidate for lead-free mid-temperature range thermoelectric clean energy conversions. However, the widespread use of this technology is constrained by the relatively low-cost performance of materials. Developing environmentally friendly thermoelectrics with high performance and earth-abundant elements is thus an urgent task. MnTe is a candidate, yet a peak ZT of 1.4 achieved so far is less satisfactory. Here, a remarkably high ZT of 1.6 at 873 K in MnTe system is realized by facilitating multiple valence band convergence and localized lattice engineering. It is demonstrated that SbGe incorporation promotes the convergence of multiple electronic valence bands in MnTe. Simultaneously, the carrier concentration can be optimized by SbGeS alloying, which significantly enhances the power factor. Simultaneously, MnS nanorods combined with dislocations and lattice distortions lead to strong phonon scattering, resulting in a markedly low lattice thermal conductivity(κ_lat ) of 0.54 W m K^-1 , quite close to the amorphous limit. As a consequence, extraordinary thermoelectric performance is achieved by decoupling electron and phonon transport. The vast increase in ZT promotes MnTe as an emerging Pb-free thermoelectric compound for a wide range of applications in waste heat recovery and power generation.

Hexahedron Symmetry and Multidirectional Facet Coupling of Orthorhombic CsPbBr3 Nanocrystals

The cube shape of orthorhombic phase CsPbBr₃ nanocrystals possesses the ability of selective facet packing that leads to 1D, 2D, and 3D nanostructures. In solution, their transformation with linear one-dimensional packing to nanorods/nanowires is extensively studied. Here, multifacet coupling in two directions of the truncated cube nanocrystals to rod couples and then to single-crystalline rectangular rods is reported. With extensive high-resolution transmission electron microscopy image analysis, length and width directions of these nanorods are derived. For the seed cube structures, finding {110} and {002} facets has remained difficult as these possess the hexahedron symmetry and their size remains smaller; however, for nanorods, these planes and the ⟨110⟩ and ⟨001⟩ directions are clearly identified. From nanocrystal to nanorod formation, the alignment directions are observed as random (as shown in the abstract graphic), and this could vary from one to the other rods obtained in the same batch of samples. Moreover, seed nanocrystal connections are derived here as not random and are rather induced by addition of the calculated amount of additional Pb(II). The same has also been extended to nanocubes obtained from different literature methods. It is predicted that a Pb-bromide buffer octahedra layer was created to connect two cubes, and this can connect along one, two, or even more facets of cubes simultaneously to connect other cubes and form different nanostructures. Hence, these results here provide some basic fundamentals of seed cube connections, the driving force to connect those, trapping the intermediate to visualize their alignments for attachments, and identifying and establishing the orthorhombic ⟨110⟩ and ⟨001⟩ directions of the length and width of CsPbBr₃ nanostructures.

One-Shot Laser-Pulse Modification of Bare and Silica-Coated Gold Nanoparticles of Various Morphologies

Gold nanoparticles are widely used in laser biomedical applications due to their favorable properties, mainly localized plasmon resonance. However, laser radiation can cause a change in the shape and size of plasmonic nanoparticles, thus resulting in an unwanted reduction of their photothermal and photodynamic efficiency due to a drastic alteration of optical properties. Most previously reported experiments were carried out with bulk colloids where different particles were irradiated by different numbers of laser pulses, thus making it difficult to accurately evaluate the laser power photomodification (PM) threshold. Here, we examine the one-shot nanosecond laser-pulse PM of bare and silica-coated gold nanoparticles moving in a capillary flow. Four types of gold nanoparticles, including nanostars, nanoantennas, nanorods, and SiO₂@Au nanoshells, were fabricated for PM experiments. To evaluate the changes in the particle morphology under laser irradiation, we combine measurements of extinction spectra with electron microscopy. A quantitative spectral approach is developed to characterize the laser power PM threshold in terms of normalized extinction parameters. The experimentally determined PM threshold increases in series were as follows: nanorods, nanoantennas, nanoshells, and nanostars. An important observation is that even a thin silica shell significantly increases the photostability of gold nanorods. The developed methods and reported findings can be useful for the optimal design of plasmonic particles and laser irradiation parameters in various biomedical applications of functionalized hybrid nanostructures.

WO3 Nanorods Decorated with Very Small Amount of Pt for Effective Hydrogen Evolution Reaction

The electrochemical hydrogen evolution reaction (HER) is one of the most promising green methods for the efficient production of renewable and sustainable H₂, for which platinum possesses the highest catalytic activity. Cost-effective alternatives can be obtained by reducing the Pt amount and still preserving its activity. The Pt nanoparticle decoration of suitable current collectors can be effectively realized by using transition metal oxide (TMO) nanostructures. Among them, WO₃ nanorods are the most eligible option, thanks to their high stability in acidic environments, and large availability. Herein, a simple and affordable hydrothermal route is used for the synthesis of hexagonal WO₃ nanorods (average length and diameter of 400 and 50 nm, respectively), whose crystal structure is modified after annealing at 400 °C for 60 min, to obtain a mixed hexagonal/monoclinic crystal structure. These nanostructures were investigated as support for the ultra-low-Pt nanoparticles (0.2-1.13 μg/cm²): decoration occurs by drop casting some drops of a Pt nanoparticle aqueous solution and the electrodes were tested for the HER in acidic environment. Pt-decorated WO₃ nanorods were characterized by performing scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Rutherford backscattering spectrometry (RBS), linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS) and chronopotentiometry. HER catalytic activity is studied as a function of the total Pt nanoparticle loading, thus obtaining an outstanding overpotential of 32 mV at 10 mA/cm², a Tafel slope of 31 mV/dec, a turn-over frequency of 5 Hz at -15 mV, and a mass activity of 9 A/mg at 10 mA/cm² for the sample decorated with the highest Pt amount (1.13 μg/cm²). These data show that WO₃ nanorods act as excellent supports for the development of an ultra-low-Pt-amount-based cathode for efficient and low-cost electrochemical HER.

Oxygen-vacancy-dependent high-performanceα-Ga2O3nanorods photoelectrochemical deep UV photodetectors

Ga₂O₃is a good candidate for deep ultraviolet photodetectors due to its wide-bandgap, good chemical, and thermal stability. Ga₂O₃-based photoelectrochemical (PEC) photodetectors attract increasing attention due to the simple fabrication and self-powered capability, but the corresponding photoresponse is still inferior. In this paper, the oxygen vacancy (V_o) engineering towardsα-Ga₂O₃was proposed to obtain high-performance PEC photodetectors. Theα-Ga₂O₃nanorods were synthesized by a simple hydrothermal method with an annealing process. The final samples were named as Ga₂O₃-400, Ga₂O₃-500, and Ga₂O₃-600 for annealing at 400 ℃, 500 ℃, and 600 ℃, respectively. Different annealing temperatures lead to different V_oconcentrations in theα-Ga₂O₃nanorods. The responsivity is 101.5 mA W^-1for Ga₂O₃-400 nanorod film-based PEC photodetectors under 254 nm illumination, which is 1.4 and 4.0 times higher than those of Ga₂O₃-500 and Ga₂O₃-600 nanorod film-based PEC photodetectors, respectively. The photoresponse ofα-Ga₂O₃nanorod film-based PEC photodetectors strongly depends on the V_oconcentration and high V_oconcentration accelerates the interfacial carrier transfer of Ga₂O₃-400, enhancing the photoresponse of Ga₂O₃-400 nanorod film-based PEC photodetectors. Furthermore, theα-Ga₂O₃nanorod film-based PEC photodetectors have good multicycle, long-term stability, and repeatability. Our result shows thatα-Ga₂O₃nanorods have promising applications in deep UV photodetectors.

Unveiling the Rolling to Kayak Transition in Propelling Nanorods with Cargo Trapping and Pumping

Magnetic nanorods driven by rotating fields in water can be rapidly steered along any direction while generating strong and localized hydrodynamic flow fields. Here we show that, when raising the frequency of the rotating field, these nanopropellers undergo a dynamic transition from a rolling to a kayak-like motion due to the increase in viscous drag and acquire a finite inclination angle with respect to the plane perpendicular to the bottom surface. We explain these experimental observations with a theoretical model which considers the nanorod as a pair of ferromagnetic particles hydrodynamically interacting with a close stationary surface. Further, we quantify how efficiently microscopic cargoes can be trapped or expelled from the moving nanorod and use numerical simulations to unveil the generated hydrodynamic flow field. These propulsion regimes can be implemented in microfluidic devices to perform precise operations based on the selective sorting of microscopic cargoes.

In Situ Growth of Ni-MOF Nanorods Array on Ti3C2Tx Nanosheets for Supercapacitive Electrodes

For the energy supply of smart and portable equipment, high performance supercapacitor electrode materials are drawing more and more concerns. Conductive Ni-MOF is a class of materials with higher conductivity compared with traditional MOFs, but it continues to lack stability. Specifically, MXene (Ti₃C₂T_x) has been employed as an electrochemical substrate for its high mechanical stability and abundant active sites, which can be combined with MOFs to improve its electrochemical performance. In this paper, a novel Ni-MOF nanorods array/Ti₃C₂T_x nanocomposite was prepared via a facile hydrothermal reaction, which makes good use of the advantages of conductive Ni-MOF and high strength Ti₃C₂T_x. The high density forest-like Ni-MOF array in situ grown on the surface of Ti₃C₂T_x can provide abundant active electrochemical sites and construct a pathway for effective ion transport. The formation of a "Ti-O···Ni" bond accomplished during an in situ growth reaction endows the strong interfacial interaction between Ni-MOF and Ti₃C₂T_x. As a result, the Ni-MOF/Ti₃C₂T_x nanocomposite can achieve a high specific capacitance of 497.6 F·g^-1 at 0.5 A·g^-1 and remain over 66% of the initial capacitance when the current density increases five times. In addition, the influence of the Ti₃C₂T_x concentration and reaction time on the morphology and performance of the resultant products were also investigated, leading to a good understanding of the formation process of the nanocomposite and the electrochemical mechanism for a supercapacitive reaction.

Highly Reliable Threshold Switching Characteristics of Surface-Modulated Diffusive Memristors Immune to Atmospheric Changes

Active cation-based diffusive memristors featuring essentially volatile threshold switching have been proposed for novel applications, such as a selector in a one-selector-and-one-resistor structure and signal generators in neuromorphic computing. However, the high variability of the switching behavior, which results from the high electroforming voltage, external environmental conditions, and transition to the non-volatile switching mode in a high-current range, is considered a major impediment to such applications. Herein, for the first time, we developed a highly reliable threshold switching device immune to atmospheric changes based on an ultraviolet-ozone (UVO)-treated diffusive memristor consisting of Ag and SiO₂ nanorods (NRs). UVO treatment forms a stable water reservoir on the surface of SiO₂ NRs, facilitating the redox reaction and ion migration of Ag. Consequently, diffusive memristors possess reliable switching characteristics, including electroforming-free, repeatable, and consistent switching with resistance to changes in ambient conditions and compliance levels during operation. We demonstrated that our approach is suitable for various metal oxides and can be used in numerous applications.

Evaluation of Pharmacokinetics, Biodistribution, and Antimalarial Efficacy of Artemether-Loaded Polymeric Nanorods

Artemether oily injection is recommended for the treatment of severe malaria by the intramuscular route. The major limitations of the artemisinin combination therapy are erratic absorption from the injection site and high dosing frequency due to a very short elimination half-life of the drug. Advanced drug delivery systems have shown significant improvement in the current malaria therapy; the desired drug concentration within infected erythrocytes is yet the major challenge. Recently, we have reported the fabrication of artemether-loaded polymeric nanorods for intravenous malaria therapy which was found to be biocompatible with THP-1 monocytes and rat erythrocytes. The objective of the present study was the evaluation of pharmacokinetics, biodistribution, and antimalarial efficacy of artemether-loaded polymeric nanorods. Scanning electron microscopy and confocal microscopy studies revealed that both nanospheres and nanorods were adsorbed onto the surface of rat erythrocytes after an incubation of 10 min. After intravenous administration to rats, artemether nanorods showed higher plasma concentration and lower elimination rate of artemether when compared with nanospheres. The biodistribution studies showed that, at 30 min, the liver concentration of DiR-loaded nanospheres was higher than that of DiR-loaded nanorods after intravenous administration to BALB/c mice. The in vitro schizont inhibition study showed that both nanorods and nanospheres exhibited concentration-dependent parasitic inhibition, wherein at lower concentrations (2 ppm), nanorods were more effective than nanospheres. However, at higher concentrations, nanospheres were found to be more effective. Nanorods showed higher chemosuppression on day 5 and day 7 than nanospheres and free artemether when studied with the Plasmodium berghei mouse model. Moreover, the survival rate of P. berghei infected mice was also found to be higher after treatment with artemether nanoformulations when compared with free artemether. In conclusion, polymeric nanorods could be a promising next-generation delivery system for the treatment of malaria.

Screening Nickel-Doped Mo2 C Nanorod Arrays for Ultrastable and Efficient Hydrogen Evolution over a Wide pH Range

Green hydrogen, using sustainable energy to decompose water to produce hydrogen, is regarded as the ideal and effective connection to convert electricity into chemical energy. Herein, well designed Ni-doped Mo₂ C nanorod electrodes self-supported on three types of substrates (Ni foam, Cu foam and stainless steel wire mesh) with outstanding gas resistance and prominent corrosion resistance were assembled together to build up a wide pH applicable electrode for Hydrogen Evolution. In particular, Ni-doped Mo₂ C nanorod arrays on stainless steel wire mesh donated as Ni-Mo₂ C@SSW exhibited remarkable electrocatalytic properties towards hydrogen evolution reaction with superior overpotentials both in 1 M KOH and 0.5 M H₂ SO₄ (102 mV and 106 mV at the current density of 10 mA cm^-2 ) and incomparable continuous durability. This work provides the possibility for the realization of low cost, high activity and ultra-stable durability HER electrocatalysts in practical industrial application.

The Tobacco Mosaic Virus Origin of Assembly Sequence is Dispensable for Specific Viral RNA Encapsidation but Necessary for Initiating Assembly at a Single Site

We have investigated whether the presence of the origin of assembly sequence (OAS) of tobacco mosaic virus (TMV) is necessary for the specific encapsidation of replicating viral RNA. To this end TMV coat protein was expressed from replicating RNA constructs with or without the OAS in planta. In both cases the replicating RNA was specifically encapsidated to give nucleoprotein nanorods, though the yield in the absence of the OAS was reduced to about 60% of that in its presence. Moreover, the nanorods generated in the absence of the OAS were more heterogeneous in length and contained frequent structural discontinuities. These results strongly suggest that the function of the OAS is to provide a unique site for the initiation of viral assembly, leading to a one-start helix, rather than the selection of virus RNA for packaging.

A Review on Low-Dimensional Nanomaterials: Nanofabrication, Characterization and Applications

The development of modern cutting-edge technology relies heavily on the huge success and advancement of nanotechnology, in which nanomaterials and nanostructures provide the indispensable material cornerstone. Owing to their nanoscale dimensions with possible quantum limit, nanomaterials and nanostructures possess a high surface-to-volume ratio, rich surface/interface effects, and distinct physical and chemical properties compared with their bulk counterparts, leading to the remarkably expanded horizons of their applications. Depending on their degree of spatial quantization, low-dimensional nanomaterials are generally categorized into nanoparticles (0D); nanorods, nanowires, and nanobelts (1D); and atomically thin layered materials (2D). This review article provides a comprehensive guide to low-dimensional nanomaterials and nanostructures. It begins with the classification of nanomaterials, followed by an inclusive account of nanofabrication and characterization. Both top-down and bottom-up fabrication approaches are discussed in detail. Next, various significant applications of low-dimensional nanomaterials are discussed, such as photonics, sensors, catalysis, energy storage, diverse coatings, and various bioapplications. This article would serve as a quick and facile guide for scientists and engineers working in the field of nanotechnology and nanomaterials.

Optomechanical Hot-Spots in Metallic Nanorod-Polymer Nanocomposites

Plasmonic coupling between adjacent metallic nanoparticles can be exploited for acousto-plasmonics, single-molecule sensing, and photochemistry. Light absorption or electron probes can be used to study plasmons and their interactions, but their use is challenging for disordered systems and colloids dispersed in insulating matrices. Here, we investigate the effect of plasmonic coupling on optomechanics with Brillouin light spectroscopy (BLS) in a prototypical metal-polymer nanocomposite, gold nanorods (Au NRs) in polyvinyl alcohol. The intensity of the light inelastically scattered on thermal phonons captured by BLS is strongly affected by the wavelength of the probing light. When light is resonant with the transverse plasmons, BLS reveals mostly the normal vibrational modes of single NRs. For lower energy off-resonant light, BLS is dominated by coupled bending modes of NR dimers. The experimental results, supported by optomechanical calculations, document plasmonically enhanced BLS and reveal energy-dependent confinement of coupled plasmons close to the tips of NR dimers, generating BLS hot-spots. Our work establishes BLS as an optomechanical probe of plasmons and promotes nanorod-soft matter nanocomposites for acousto-plasmonic applications.

Non-spherical Polymeric Nanocarriers for Therapeutics: The Effect of Shape on Biological Systems and Drug Delivery Properties

This review aims to highlight the importance of particle shape in the design of polymeric nanocarriers for drug delivery systems, along with their size, surface chemistry, density, and rigidity. Current manufacturing methods used to obtain non-spherical polymeric nanocarriers such as filomicelles or nanoworms, nanorods and nanodisks, are firstly described. Then, their interactions with biological barriers are presented, including how shape affects nanoparticle clearance, their biodistribution and targeting. Finally, their drug delivery properties and their therapeutic efficacy, both in vitro and in vivo, are discussed and compared with the characteristics of their spherical counterparts.

Cerium Oxide Nanorods Synthesized by Dalbergia sissoo Extract for Antioxidant, Cytotoxicity, and Photocatalytic Applications

In this study, cerium oxide nanorods (CeO₂-NRs) were synthesized by using the phytochemicals present in the Dalbergia sissoo extract. The physiochemical characteristics of the as-prepared CeO₂-NRs were investigated by using ultraviolet-visible spectroscopy (UV-VIS), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction analysis (XRD). The SEM and UV-VIS analyses revealed that the acquired nanomaterials possessed a rod-like morphology while the XRD results further confirmed that the synthesized NRs exhibited a cubic crystal lattice system. The antioxidant capacity of the synthesized CeO₂-NRs was investigated by using several in vitro biochemical assays. It was observed that the synthesized NRs exhibited better antioxidant potential in comparison to the industrial antioxidant of the butylated hydroxyanisole (BHA) in 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. The biochemical assays, including lipid peroxidation (LPO), total antioxidant capacity (TAC), and catalase activity (CAT), were also performed in the human lymphocytes incubated with the CeO₂-NRs to investigate the impact of the NRs on these oxidative biomarkers. Enhanced reductive capabilities were observed in all the assays, revealing that the NRs possess excellent antioxidant properties. Moreover, the cytotoxic potential of the CeO₂-NRs was also investigated with the MTT assay. The CeO₂-NRs were found to effectively kill off the cancerous cells (MCF-7 human breast cancer cell line), further indicating that the synthesized NRs exhibit anticancer potential as well. One of the major applications studied for the prepared CeO₂-NRs was performing the statistical optimization of the photocatalytic degradation reaction of the methyl orange (MO) dye. The reaction was optimized by using the technique of response surface methodology (RSM). This advanced approach facilitates the development of the predictive model on the basis of central composite design (CCD) for this degradation reaction. The maximum degradation of 99.31% was achieved at the experimental optimized conditions, which corresponded rather well with the predicted percentage degradation values of 99.58%. These results indicate that the developed predictive model can effectively explain the performed experimental reaction. To conclude, the CeO₂-NRs exhibited excellent results for multiple applications.

FDTD Simulations of Shell Scattering in Au@SiO2 Core-Shell Nanorods with SERS Activity for Sensory Purposes

The article describes the results of Finite-Difference Time-Domain (FDTD) mathematical modeling of electromagnetic field parameters near the surfaces of core-shell gold-based nanorods in the Au@SiO₂ system. Three excitation linewidths (λ = 532, 632.8, and 785 nm) were used for theoretical experiments. Electric field parameters for Au nanorods, Au@SiO₂ nanorods, and hollow SiO₂ shells have been calculated and evaluated. The correlations between electric field calculated parameters with nanorod morphology and shell size parameters have been clarified. The optical properties of nanoobjects have been simulated and discussed. The highest maximum calculated value of the electric field tension was E = 7.34 V/m. The enhancement coefficient was |E/E0|4 = 3.15 × 10⁷ and was obtained on a rod with a SiO₂ shell with dimensional parameters of height 70 nm, rod width 20 nm, and shell thickness 20 nm. As a result, a flexible simulation algorithm has been developed for the simulation of electric field parameters in each component of the Au@SiO₂ system. The developed simulation algorithm will be applicable in the future for any other calculations of optical parameters in any similar component of the core-shell system.

Combined Magnetic Hyperthermia and Photothermia with Polyelectrolyte/Gold-Coated Magnetic Nanorods

Magnetite nanorods (MNRs) are synthesized based on the use of hematite nanoparticles of the desired geometry and dimensions as templates. The nanorods are shown to be highly monodisperse, with a 5:1 axial ratio, and with a 275 nm long semiaxis. The MNRs are intended to be employed as magnetic hyperthermia and photothermia agents, and as drug vehicles. To achieve a better control of their photothermia response, the particles are coated with a layer of gold, after applying a branched polyethyleneimine (PEI, 2 kDa molecular weight) shell. Magnetic hyperthermia is performed by application of alternating magnetic fields with frequencies in the range 118-210 kHz and amplitudes up to 22 kA/m. Photothermia is carried out by subjecting the particles to a near-infrared (850 nm) laser, and three monochromatic lasers in the visible spectrum with wavelengths 480 nm, 505 nm, and 638 nm. Best results are obtained with the 505 nm laser, because of the proximity between this wavelength and that of the plasmon resonance. A so-called dual therapy is also tested, and the heating of the samples is found to be faster than with either method separately, so the strengths of the individual fields can be reduced. Due to toxicity concerns with PEI coatings, viability of human hepatoblastoma HepG2 cells was tested after contact with nanorod suspensions up to 500 µg/mL in concentration. It was found that the cell viability was indistinguishable from control systems, so the particles can be considered non-cytotoxic in vitro. Finally, the release of the antitumor drug doxorubicin is investigated for the first time in the presence of the two external fields, and of their combination, with a clear improvement in the rate of drug release in the latter case.

Novel Supercapacitor Electrode Derived from One Dimensional Cerium Hydrogen Phosphate (1D-Ce(HPO4)2.xH2O)

In this manuscript, we are reporting for the first time one dimensional (1D) cerium hydrogen phosphate (Ce(HPO₄)₂.xH₂O) electrode material for supercapacitor application. In short, a simple hydrothermal technique was employed to prepare Ce(HPO₄)₂.xH₂O. The maximum surface area of 82 m² g^-1 was obtained from nitrogen sorption isotherm. SEM images revealed Ce(HPO₄)₂.xH₂O exhibited a nanorod-like structure along with particles and clusters. The maximum specific capacitance of 114 F g^-1 was achieved at 0.2 A g^-1 current density for Ce(HPO₄)/NF electrode material in a three-electrode configuration. Furthermore, the fabricated symmetric supercapacitor (SSC) based on Ce(HPO₄)₂.xH₂O//Ce(HPO₄)₂.xH₂O demonstrates reasonable specific energy (2.08 Wh kg^-1), moderate specific power (499.88 W kg^-1), and outstanding cyclic durability (retains 92.7% of its initial specific capacitance after 5000 GCD cycles).

Low-Temperature Processed Brookite Interfacial Modification for Perovskite Solar Cells with Improved Performance

The scaffold layer plays an important role in transporting electrons and preventing carrier recombination in mesoporous perovskite solar cells (PSCs), so the engineering of the interface between the scaffold layer and the light absorption layer has attracted widespread concern. In this work, vertically grown TiO₂ nanorods (NRs) as scaffold layers are fabricated and further treated with TiCl₄ aqueous solution. It can be found that a thin brookite TiO₂ nanoparticle (NP) layer is formed by the chemical bath deposition (CBD) method on the surface of every rutile NR with a low annealing temperature (150 °C), which is beneficial for the infiltration and growth of perovskite. The PSC based on the TiO₂ NR/brookite NP structure shows the best power conversion of 15.2%, which is 56.37% higher than that of the PSC based on bare NRs (9.72%). This complex structure presents an improved pore filling fraction and better carrier transport capability with less trap-assisted carrier recombination. In addition, low-annealing-temperature-formed brookite NPs possess a more suitable edge potential for electrons to transport from the perovskite layer to the electron collection layer when compared with high-annealing-temperature-formed anatase NPs. The brookite phase TiO₂ fabricated at a low temperature presents great potential for flexible PSCs.

Gold Nanorod-Incorporated Halloysite Nanotubes Functionalized with Antibody for Superior Antibacterial Photothermal Treatment

The global spread of antibiotic-resistant strains, and the need to protect the microflora from non-specific antibiotics require more effective and selective alternatives. In this work, we demonstrate for the first time a superior antibacterial photothermal effect of plasmonic gold nanorods (AuNRs) via their incorporation onto natural clay halloysite nanotubes (HNTs), which were functionalized with anti-E. coli antibodies (Ab-HNTs). AuNRs were incorporated onto the Ab-HNTs through a facile freeze-thaw cycle, and antibody integrity following the incorporation was confirmed via infrared spectroscopy and fluorescence immunolabeling. The incorporation efficiency was studied using UV-Vis absorption and transmission electron microscopy (TEM). Mixtures of E. coli and AuNR-Ab-HNTs hybrids or free AuNRs were irradiated with an 808 nm laser at 3-4 W cm^-2, and the resulting photothermal antibacterial activity was measured via plate count. The irradiated AuNR-Ab-HNTs hybrids exerted an 8-fold higher antibacterial effect compared to free AuNR under 3.5 W cm^-2; whereas the latter induced a 6 °C-higher temperature elevation. No significant antibacterial activity was observed for the AuNR-Ab-HNTs hybrid against non-target bacteria species (Serratia marcescens and Staphylococcus epidermidis). These findings are ascribed to the localization of the photothermal ablation due to the binding of the antibody-functionalized clay to its target bacteria, as supported through TEM imaging. In the future, the HNTs-based selective carriers presented herein could be tailored with other antibacterial nanoparticles or against another microorganism via the facile adjustment of the immobilized antibody.

Novel Nanoarchitectured Cu2Te as a Photocathodes for Photoelectrochemical Water Splitting Applications

Designing photocathodes with nanostructures has been considered a promising way to improve the photoelectrochemical (PEC) water splitting activity. Cu₂Te is one of the promising semiconducting materials for photoelectrochemical water splitting, the performance of Cu₂Te photocathodes remains poor. In this work, we report the preparation of Cu₂Te nanorods (NRs) and vertical nanosheets (NSs) assembled film on Cu foil through a vapor phase epitaxy (VPE) technique. The obtained nano architectures as photocathodes toward photoelectrochemical (PEC) performance was tested afterwards for the first time. Optimized Cu₂Te NRs and NSs photocathodes showed significant photocurrent density up to 0.53 mA cm^-2 and excellent stability under illumination. Electrochemical impedance spectroscopy and Mott-Schottky analysis were used to analyze in more detail the performance of Cu₂Te NRs and NSs photocathodes. From these analyses, we propose that Cu₂Te NRs and NSs photocathodes are potential candidate materials for use in solar water splitting.