Ion-Dipole Interaction Regulation Enables High-Performance Single-Ion Polymer Conductors for Solid-State Batteries

Solid polymer electrolytes with large ionic conductivity, high ionic transference number, and good interfacial compatibility with electrodes are highly desired for solid-state batteries. However, unwanted polarizations and side reactions occurring in traditional dual-ion polymer conductors hinder their practical applications. Here, single-ion polymer conductors (SIPCs) with exceptional selectivity for Li-ion conduction (Li-ion transference number up to 0.93), high room-temperature ionic conductivity of about 10^-4 S cm^-1 , and a wide electrochemical stability window (>4.5 V, vs Li/Li⁺ ) are prepared by precisely regulating the ion-dipole interactions between Li⁺ and carbonyl/cyano groups. The resulting SIPCs show an excellent electrochemical stability with Li metal during long-term cycling at room temperature and 60 °C. LiFePO₄ -based solid-state cells containing the SIPCs exhibit good rate and cycling performance in a wide temperature range from -20 to 90 °C. By the same way of ion-dipole interaction regulation, sodium- and potassium-based SIPCs with both high ionic conductivity and high cationic transference numbers are also prepared. The findings in this work provide guidance for the development of high-performance SIPCs and other metal-ion systems beyond Li⁺ .

Dissecting the Solid Polymer Electrolyte-Electrode Interface in the Vicinity of Electrochemical Stability Limits

Proper understanding of solid polymer electrolyte-electrode interfacial layer formation and its implications on cell performance is a vital step toward realizing practical solid-state lithium-ion batteries. At the same time, probing these solid-solid interfaces is extremely challenging as they are buried within the electrochemical system, thereby efficiently evading exposure to surface-sensitive spectroscopic methods. Still, the probing of interfacial degradation layers is essential to render an accurate picture of the behavior of these materials in the vicinity of their electrochemical stability limits and to complement the incomplete picture gained from electrochemical assessments. In this work, we address this issue in conjunction with presenting a thorough evaluation of the electrochemical stability window of the solid polymer electrolyte poly(ε-caprolactone):lithium bis(trifluoromethanesulfonyl)imide (PCL:LiTFSI). According to staircase voltammetry, the electrochemical stability window of the polyester-based electrolyte was found to span from 1.5 to 4 V vs Li⁺/Li. Subsequent decomposition of PCL:LiTFSI outside of the stability window led to a buildup of carbonaceous, lithium oxide and salt-derived species at the electrode-electrolyte interface, identified using postmortem spectroscopic analysis. These species formed highly resistive interphase layers, acting as major bottlenecks in the SPE system. Resistance and thickness values of these layers at different potentials were then estimated based on the impedance response between a lithium iron phosphate reference electrode and carbon-coated working electrodes. Importantly, it is only through the combination of electrochemistry and photoelectron spectroscopy that the full extent of the electrochemical performance at the limits of electrochemical stability can be reliably and accurately determined.

Automated Design of Li+ -Conducting Polymer by Quantum-Inspired Annealing

Automated molecule design by computers has been an essential topic in materials informatics. Still, generating practical structures is not easy because of the difficulty in treating material stability, synthetic difficulty, mechanical properties, and other miscellaneous parameters, often leading to the generation of junk molecules. We tackle the problem by introducing supervised/unsupervised machine learning and quantum-inspired annealing. Our autonomous molecular design system can help experimental researchers discover practical materials more efficiently. Like the human design process, new molecules are explored based on knowledge of existing compounds. A new solid-state polymer electrolyte for lithium-ion batteries is designed and synthesized, giving a promising room temperature conductivity of 10^-5 S/cm with reasonable thermal, chemical, and mechanical properties. This article is protected by copyright. All rights reserved.

Electrical Transport, Structural, Optical and Thermal Properties of [(1-x)Succinonitrile: xPEO]-LiTFSI-Co(bpy)3(TFSI)2-Co(bpy)3(TFSI)3 Solid Redox Mediators

The solar cell has been considered one of the safest modes for electricity generation. In a dye-sensitized solar cell, a commonly used iodide/triiodide redox mediator inhibits back-electron transfer reactions, regenerates dyes, and reduces triiodide into iodide. The use of iodide/triiodide redox, however, imposes several problems and hence needs to be replaced by alternative redox. This paper reports the first Co2+/Co3+ solid redox mediators, prepared using [(1−x)succinonitrile: xPEO] as a matrix and LiTFSI, Co(bpy)3(TFSI)2, and Co(bpy)3(TFSI)3 as sources of ions. The electrolytes are referred to as SN_E (x = 0), Blend 1_E (x = 0.5 with the ethereal oxygen of the PEO-to-lithium ion molar ratio (EO/Li+) of 113), Blend 2_E (x = 0.5; EO/Li+ = 226), and PEO_E (x = 1; EO/Li+ = 226), which achieved electrical conductivity of 2.1 × 10−3, 4.3 × 10−4, 7.2 × 10−4, and 9.7 × 10−7 S cm−1, respectively at 25 °C. Only the blend-based polymer electrolytes exhibited the Vogel-Tamman-Fulcher-type behavior (vitreous nature) with a required low pseudo-activation energy (0.05 eV), thermal stability up to 125 °C, and transparency in UV-A, visible, and near-infrared regions. FT-IR spectroscopy demonstrated the interaction between salt and matrix in the following order: SN_E < Blend 2_E < Blend 1_E << PEO_E. The results were compared with those of acetonitrile-based liquid electrolyte, ACN_E.

Improving Cyclability of All-Solid-State Batteries via Stabilized Electrolyte-Electrode Interface with Additive in Poly(propylene carbonate) Based Solid Electrolyte

In this study, tetraethylene glycol dimethyl ether (TEGDME) is demonstrated as an effective additive in poly(propylene carbonate) (PPC) polymers for the enhancement of ionic conductivity and interfacial stability and a tissue membrane is used as a backbone to maintain the mechanical strength of the solid polymer electrolytes (SPEs). TEGDME in the PPC allows the uniform distribution of conductive LiF species throughout the cathode electrolyte interface (CEI) layer which plays a critically important role in the formation of a stable and efficient CEI. In addition, the high modulus of SPEs suppresses the formation of a protrusion-type CEI on the cathode. The SPE with the optimized TEGDME content exhibits a high ionic conductivity of 0.89 mS cm^-1 , an adequate potential stability of up to 4.89 V, and a high Li-ion transference number of 0.81 at 60 °C. Moreover, the Li/SPE/Li cell demonstrates excellent cycling stability for 1650 h, and the Li/SPE/LFP full cell exhibits an initial reversible capacity of 103 mAh g^-1 and improved stability over 500 cycles at a rate of 1 C. The TEGDME additive improves the electrochemical properties of the SPEs and promotes the creation of a stable interface, which is crucial for ASSLIBs.

Solid Polymer Electrolytes Based on Gellan Gum and Ionic Liquid for Sustainable Electrochromic Devices

Materials sustainability is becoming increasingly relevant in every developed technology and, consequently, environmentally friendly solid polymer electrolytes (SPEs) based on gellan gum and different quantities of ionic liquid (IL) 1-ethyl-3-methyl-imidazolium-thiocyanate [Emim][SCN] have been prepared and applied in electrochromic devices (ECDs). The addition of the IL does not affect the crystalline phase of gellan gum, and the samples show a compact morphology, surface uniformity, no phase separation, and good distribution of the IL within the carrageenan matrix. The developed SPE are thermally stable up to ∼100 °C and show suitable mechanical properties. The most concentrated sample (39 wt % IL content) reaches a maximum ionic conductivity value of 6.0 × 10^-3 S cm^-1 and 1.8 × 10^-2 S cm^-1 at 30 and 90 °C, respectively. The electrochromic device (ECD) was fabricated with poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS) as working electrode and the developed SPE was compared with an aqueous 0.1 M KNO₃ solution. The electrochromic performance of the electrolyte was assessed in terms of spectroelectrochemistry, demonstrating a fully flexible ECD operating at voltages below 1.0 V. This novel electrolyte opens the door to the preparation of high performance sustainable ECD.

Recyclable, Self-Healing Solid Polymer Electrolytes by Soy Protein-Based Dynamic Network

Compared to traditional organic liquid electrolytes, which often present leakage, flammability, and chemical stability problems, solid polymer electrolytes (SPEs) are widely regarded as one of the most promising candidates for the development of safer lithium-ion batteries. Vitrimers are a new class of polymer materials consisting of dynamic covalent networks that can change their topology by thermally activated bond-exchange reactions. Herein, the recyclable and self-healing solid polymer electrolytes (SPEs) with a soy protein isolate (SPI)-based imine bond dynamic network are reported. This malleable covalent cross-linked network polymer can be reshaped and recycled at high temperature (100 °C) or only with water at ambient temperature (25 °C), which may realize the green processing of energy materials. The introduction of bis(trifluoromethane) sulfonimide lithium (LiTFSI) significantly reinforces the conductivity of the dynamic network to a maximum of 3.3 × 10-4 S cm-1 . This simple and applicable method establishes new principles for designing scalable and flexible strategies for fabricating polymer electrolytes.

Impedance and Dielectric Properties of PVC:NH4I Solid Polymer Electrolytes (SPEs): Steps toward the Fabrication of SPEs with High Resistivity

In the present article, a simple technique is provided for the fabrication of a polymer electrolyte system composed of polyvinyl chloride (PVC) and doped with varying content of ammonium iodide (NH₄I) salt using solution-casting methodology. The influences of NH₄I on the structural, electrochemical, and electrical properties of PVC have been investigated using X-ray diffraction, electrochemical impedance spectroscopy (EIS), and dielectric properties. The X-ray study reveals the amorphous nature of the polymer-salt complex. The EIS measurement revealed an ionic conductivity of 5.57 × 10^-10 S/cm for the electrolyte containing 10 wt.% of salt. Our hypothesis is provided, which demonstrated the likelihood of designing highly resistive solid electrolytes using the concept of a polymer electrolyte. Here, the results showed that the resistivity of the studied samples is not dramatically decreased with increasing NH₄I. Bode plots distinguish the decrease in resistance or impedance with increasing salt contents. Dielectric measurements revealed a decrease in the dielectric constant with the increase of NH₄I content in the PVC polymer. The relaxation time and dielectric properties of the electrolytes confirmed their non-Debye type behavior. This pattern has been validated by the existence of an incomplete semicircle in the Argand plot. Insulation materials with low ε_r have found widespread applications in electronic devices due to the reduction in delay, power dissipation, and crosstalk. In addition, an investigation of real and imaginary parts of electric modulus leads to the minimized electrode polarization being reached.

Multilayered Solid Polymer Electrolytes with Sacrificial Coating for Suppressing Lithium Dendrite Growth

The practical application of lithium-metal batteries (LMBs) is hindered by the lithium dendrite formation during cycling. In this work, we report a multilayered solid polymer electrolyte (SPE) formed by sandwiching a comb-chain cross-linker-based network SPE (ConSPE) film with a linear poly(ethylene oxide) (PEO) SPE coating. Benefiting from the drastically different lithium dendrite resisting properties of the ConSPE and linear PEO SPE, the lithium dendrite growth in the multilayered SPEs could be tuned, with the linear PEO SPE effectively serving as a sacrificial layer to accommodate the lithium dendrite growth. Symmetrical lithium cells with the multilayered SPE exhibited an extended short-circuit time ∼4.1 times that for the single-layer ConSPE at a high current density of 1.5 mA cm^-2. Li/LiFePO₄ batteries with multilayered SPEs delivered superior cycling performance at extremely high C-rates of 2C and 10C. Our multilayered SPE architecture, therefore, opens up a new gateway for advancing SPE design for future LMBs.

The Unusual Conductivity of Na+ in PEO-Based Statistical Copolymer Solid Electrolytes: When Less Means More

The low conductivity of Na⁺ electrolytes in solid polymer electrolytes (SPEs) curtails the development of Na polymer batteries. In this study, NaClO₄ (3-24 wt %, 90-9:1 O:Na) is dissolved in statistical copolymers of ethylene oxide (EO) and propylene oxide (PO) (0-20 mol %). Remarkably, the conductivity of these SPEs increases as the concentration of Na⁺ decreases, thus departing from the usual Nernstian behavior. Using a combination of calorimetric measurements and molecular dynamic simulations, this unusual phenomenon is attributed to the presence of physical cross-links generated by Na⁺ . As a result, polymers containing a low salt concentration (3 wt %) display a drastically enhanced ionic conductivity (up to 0.2 10^-4  S cm^-1 at 25 °C), thus paving the way for the design of all-solid-state PEO-based sodium batteries operational at room temperature.

Development on Solid Polymer Electrolytes for Electrochemical Devices

Electrochemical devices, especially energy storage, have been around for many decades. Liquid electrolytes (LEs), which are known for their volatility and flammability, are mostly used in the fabrication of the devices. Dye-sensitized solar cells (DSSCs) and quantum dot sensitized solar cells (QDSSCs) are also using electrochemical reaction to operate. Following the demand for green and safer energy sources to replace fossil energy, this has raised the research interest in solid-state electrochemical devices. Solid polymer electrolytes (SPEs) are among the candidates to replace the LEs. Hence, understanding the mechanism of ions' transport in SPEs is crucial to achieve similar, if not better, performance to that of LEs. In this paper, the development of SPE from basic construction to electrolyte optimization, which includes polymer blending and adding various types of additives, such as plasticizers and fillers, is discussed.

High-Performance Room Temperature Lithium-Ion Battery Solid Polymer Electrolytes Based on Poly(vinylidene fluoride-co-hexafluoropropylene) Combining Ionic Liquid and Zeolite

The demand for more efficient energy storage devices has led to the exponential growth of lithium-ion batteries. To overcome the limitations of these systems in terms of safety and to reduce environmental impact, solid-state technology emerges as a suitable approach. This work reports on a three-component solid polymer electrolyte system based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), the ionic liquid 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]), and clinoptilolite zeolite (CPT). The influences of the preparation method and of the dopants on the electrolyte stability, ionic conductivity, and battery performance were studied. The developed electrolytes show an improved room temperature ionic conductivity (1.9 × 10^-4 S cm^-1), thermal stability (up to 300 °C), and mechanical stability. The corresponding batteries exhibit an outstanding room temperature performance of 160.3 mAh g^-1 at a C/15-rate, with a capacity retention of 76% after 50 cycles. These results represent a step forward in a promising technology aiming the widespread implementation of solid-state batteries.

High-Performance Room Temperature Lithium-Ion Battery Solid Polymer Electrolytes Based on Poly(vinylidene fluoride-co-hexafluoropropylene) Combining Ionic Liquid and Zeolite

The demand for more efficient energy storage devices has led to the exponential growth of lithium-ion batteries. To overcome the limitations of these systems in terms of safety and to reduce environmental impact, solid-state technology emerges as a suitable approach. This work reports on a three-component solid polymer electrolyte system based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), the ionic liquid 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]), and clinoptilolite zeolite (CPT). The influences of the preparation method and of the dopants on the electrolyte stability, ionic conductivity, and battery performance were studied. The developed electrolytes show an improved room temperature ionic conductivity (1.9 × 10^-4 S cm^-1), thermal stability (up to 300 °C), and mechanical stability. The corresponding batteries exhibit an outstanding room temperature performance of 160.3 mAh g^-1 at a C/15-rate, with a capacity retention of 76% after 50 cycles. These results represent a step forward in a promising technology aiming the widespread implementation of solid-state batteries.

High-Voltage and Wide-Temperature Lithium Metal Batteries Enabled by Ultrathin MOF-Derived Solid Polymer Electrolytes with Modulated Ion Transport

Solid polymer electrolytes (SPEs) of superior ionic conductivity, long-term cycling stability, and good interface compatibility are regarded as promising candidates to enable the practical applications of solid lithium metal batteries (SLMBs). Here, a mixed-matrix SPE (MMSE) with incorporated metal-organic frameworks (MOFs) and ionic liquid is prepared. The dissociation of Li salt in MMSE can be promoted effectively due to the introduction of MOF via the Fourier-transform infrared spectroscopy (FT-IR) analysis, density functional theory calculation, and molecular dynamics simulation. The as-formed MMSE exhibits an ultralow thickness of 20 μm with a satisfactory ionic conductivity and lithium-ion transference number (1.1 mS cm^-1 at 30 °C, 0.72). The optimized SLMBs with high-voltage LiMn_0.75Fe_0.25PO₄ (LMFP) exhibit an excellent cyclability at 4.2 V under room temperature. Moreover, Li/MMSE/LiFePO₄ cells have desirable cycle performance from -20 to 100 °C, and their capacity remains 143.3 mA h g^-1 after being cycled 300 times at 10 C at 100 °C. The Li/LiFePO₄ pouch cells also show excellent safety under extreme conditions. The Li symmetric cells can work steadily even at a supreme current density of 4 mA cm^-2 at 100 °C. From the above analysis, these MMSEs present new opportunities for the development of SLMBs with good electrochemical properties.

High Salt-Content Plasticized Flame-Retardant Polymer Electrolytes

New solid polymer electrolytes are of particular interest for next-generation high-energy batteries since they can overcome the limited voltage window of conventional polyether-based electrolytes. Herein, a flame-retardant phosphorus-containing polymer, poly(dimethyl(methacryloyloxy)methyl phosphonate) (PMAPC1) is introduced as a promising polymer matrix. Free-standing membranes are easily obtained by mixing PMAPC1 with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and a small amount of acetonitrile (AN). LiTFSI/AN mixed aggregates are formed that act as plasticizers and enable ionic conductivities up to 1.6 × 10^-3 S cm^-1 at 100 °C. The high content of LiTFSI used in our electrolytes leads to the formation of a stable LiF solid-electrolyte interphase, which can effectively suppress Li dendrites and the chemical degradation of AN in contact with Li. Accordingly the electrolyte membranes exhibit a wide electrochemical stability window above 4.7 V versus Li⁺/Li and fire-retardant properties due to the presence of the phosphorus-containing polymer. Atomistic molecular modeling simulations have been performed to determine the structure of the electrolytes on the microscopic scale and to rationalize the trends in ionic conductivity and the transport regime as a function of the electrolyte composition. Finally, our electrolyte membranes enable stable cycling performance for LiFePO₄|PMAPC1 + LiTFSI + AN|Li batteries.

Stable Cycling of a 4 V Class Lithium Polymer Battery Enabled by In Situ Cross-Linked Ethylene Oxide/Propylene Oxide Copolymer Electrolytes with Controlled Molecular Structures

Commercial lithium-ion batteries are vulnerable to fire accidents, mainly due to volatile and flammable liquid electrolytes. Although solid polymer electrolytes (SPEs) are considered promising alternatives with antiflammability and processability for roll-to-roll mass production, several requirements have not yet been fulfilled for a viable lithium polymer battery. Such requirements include ionic conductivity, electrochemical stability, and interfacial resistance. In this work, the ionic conductivity of the SPEs is optimized by controlling the molecular weight and structural morphology of the plasticizers as well as introducing propylene oxide (PO) groups. Electrochemical stability is also enhanced using ethylene oxide (EO)/PO copolymer electrolytes, making the SPEs compatible with high-Ni LiNi_xCo_yMn_1-x-yO₂ cathodes. The in situ cross-linking method, in which a liquid precursor first wets the electrode and is then solidified by a subsequent thermal treatment, enables the SPEs to soak into the 60 μm thick electrode with a high loading density of more than 8 mg cm^-2. Thus, interfacial resistance between the SPE and the electrode is minimized. By using the in situ cross-linked EO/PO copolymer electrolytes, we successfully demonstrate a 4 V class lithium polymer battery, which performs stable cycling with a marginal capacity fading even over 100 cycles.

Area Oversizing of Lithium Metal Electrodes in Solid-State Batteries: Relevance for Overvoltage and thus Performance?

Systematic and systemic research and development of solid electrolytes for lithium batteries requires a reliable and reproducible benchmark cell system. Therefore, factors relevant for performance, such as temperature, voltage operation range, or specific current, should be defined and reported. However, performance can also be sensitive to apparently inconspicuous and overlooked factors, such as area oversizing of the lithium electrode and the solid electrolyte membrane (relative to the cathode area). In this study, area oversizing is found to diminish polarization and improves the performance in LiNi0.6 Mn0.2 Co0.2 O2 (NMC622)||Li cells, with a more pronounced effect under kinetically harsh conditions (e. g., low temperature and/or high current density). For validity reasons, the polarization behavior is also investigated in Li||Li symmetric cells. Given the mathematical conformity of the characteristic overvoltage behavior with the Sand's equation, the beneficial effect is attributed to lower depletion of Li ions at the electrode/electrolyte interface. In this regard, the highest possible effect of area oversizing on the performance is discussed, that is when the accompanied decrease in current density and overvoltage overcomes the Sand's threshold limit. This scenario entirely prevents the capacity decay attributable to Li+ depletion and is in line with the mathematically predicted values.

Solid Polymer Electrolytes with High Conductivity and Transference Number of Li Ions for Li-Based Rechargeable Batteries

Smart electronics and wearable devices require batteries with increased energy density, enhanced safety, and improved mechanical flexibility. However, current state-of-the-art Li-based rechargeable batteries (LBRBs) use highly reactive and flowable liquid electrolytes, severely limiting their ability to meet the above requirements. Therefore, solid polymer electrolytes (SPEs) are introduced to tackle the issues of liquid electrolytes. Nevertheless, due to their low Li⁺ conductivity and Li⁺ transference number (LITN) (around 10^-5 S cm^-1 and 0.5, respectively), SPE-based room temperature LBRBs are still in their early stages of development. This paper reviews the principles of Li⁺ conduction inside SPEs and the corresponding strategies to improve the Li⁺ conductivity and LITN of SPEs. Some representative applications of SPEs in high-energy density, safe, and flexible LBRBs are then introduced and prospected.

Oligoether/Zwitterion Diblock Copolymers: Synthesis and Application as Cathode-Coating Material for Li Batteries

Poly (ethylene oxide) (PEO) has been investigated as an ion-conductive matrix for several decades due to its excellent properties. However, further improvements are needed to enable a PEO-based ion-conductive matrix for practical applications. In order to develop novel solid polymer electrolytes based on zwitterions, we synthesized diblock copolymers (PPEGMA-b-SPBs) with oligoether and zwitterionic side-chains and evaluated their physico-chemical properties. PPEGMA-b-SPBs with various unit ratios were synthesized by RAFT polymerization. PPEGMA-b-SPBs with/without LiTFSA exhibited two distinct glass transition temperatures regardless of the unit ratio of PEGMA and SPB. AFM observations clearly revealed phase-separated structures. The ionic conductivity of PPEGMA-b-SPBs increased even at a high salt concentrations such as [EO]:[Li] = 6:1 and was over 10⁻⁵ S cm⁻¹ at 25 °C. This tendency is unusual in a PEO matrix. The oxidation stability of PPEGMA-b-SPBs was about 5.0 V vs. Li/Li⁺, which is a higher value than that of PEO. The improvement of the electrochemical properties is attributed to the introduction of the SPB block into the block copolymers. PPEGMA-b-SPBs were evaluated as cathode-coating materials for Li batteries. The discharge capacity and coulombic efficiency of the cells employing the cathode (LiNi_1/3Mn_1/3Co_1/3O₂ (NMC)) coated with the block copolymers were much higher than those of the cell employing the pristine cathode at the 50th cycle in the cut-off voltage range of 3.0–4.6 V.

Macromolecular Design of Lithium Conductive Polymer as Electrolyte for Solid-State Lithium Batteries

In the development of solid-state lithium batteries, solid polymer electrolyte (SPE) has drawn extensive concerns for its thermal and chemical stability, low density, and good processability. Especially SPE efficiently suppresses the formation of lithium dendrite and promotes battery safety. However, most of SPE is derived from the matrix with simple functional group, which suffers from low ionic conductivity, reduced mechanical properties after conductivity modification, bad electrochemical stability, and low lithium-ion transference number. Appling macromolecular design with multiple functional groups to polymer matrix is accepted as a strategy to solve the problems of SPE fundamentally. In this review, macromolecular design based on lithium conducting groups is summarized including copolymerization, network construction, and grafting. Meanwhile, the construction of single-ion conductor polymer is also focused herein. Moreover, synergistic effects between the designed matrix, lithium salt, and fillers are reviewed with the objective to further improve the performance of SPE. At last, future studies on macromolecular design are proposed in the development of SPE for solid-state batteries with high energy density and durability.

Stereolithography Three-Dimensional Printing Solid Polymer Electrolytes for All-Solid-State Lithium Metal Batteries

Liquid-free all-solid-state lithium metal batteries (ASSLMBs) are promising candidates to meet the requirements of safety and high energy density for energy storages. However, poor interfacial contact is a major obstacle limiting their applications. Herein, we report a solid polymer electrolyte (SPE), originally prepared by stereolithography (SLA) three-dimensional (3D) printing for ASSLMBs. A 3D-Archimedean spiral structured SPE is rationally designed, which can shorten the Li-ion transport pathway from the electrolyte into the electrode, reinforce the interfacial adhesion, and improve the mass loading of active materials. The SLA printed SPE exhibits a high ionic conductivity of 3.7 × 10^-4 S cm^-1 at 25 °C. Furthermore, Li|3D-SPE|LFP cells achieve reduced interfacial impedance and higher specific capacity of 128 mAh g^-1 after 250 cycles than those using structure-free SPE of 32 mAh g^-1. This work opens the great promise of SLA 3D printing technology to fabricate high-performance SPEs in ASSLMBs for next-generation energy storages.

Lignin-Based Solid Polymer Electrolytes: Lignin-Graft-Poly(ethylene glycol)

Lignin is an aromatic-rich biomass polymer that is cheap, abundant, and sustainable. However, its application in the solid electrolyte field is rare due to challenges in well-defined polymer synthesis. Herein, the synthesis of lignin-graft-poly(ethylene glycol) (PEG) and its conductivity test for a solid electrolyte application are demonstrated. The main steps of synthesis include functionalization of natural lignin's hydroxyl to alkene, followed by graft-copolymerization of PEG thiol to the lignin via photoredox thiol-ene reaction. Two lignin-graft-PEGs are prepared having 22 wt% lignin (lignin-graft-PEG 550) and 34 wt% lignin (lignin-graft-PEG 2000). Then, new polymer electrolytes for conductivity tests are prepared via addition of lithium bis-trifluoromethanesulfonimide. The polymer graft electrolytes exhibit ionic conductivity up to 1.4 × 10^-4  S cm^-1  at 35 °C. The presence of lignin moderately impacts conductivity at elevated temperature compared to homopolymer PEG. Furthermore, the ionic conductivity of lignin-graft-PEG at ambient temperature is significantly higher than homopolymer PEG precedents.

Thermal Conductive 2D Boron Nitride for High-Performance All-Solid-State Lithium-Sulfur Batteries

Polymer-based solid-state electrolytes are shown to be highly promising for realizing low-cost, high-capacity, and safe Li batteries. One major challenge for polymer solid-state batteries is the relatively high operating temperature (60-80 °C), which means operating such batteries will require significant ramp up time due to heating. On the other hand, as polymer electrolytes are poor thermal conductors, thermal variation across the polymer electrolyte can lead to nonuniformity in ionic conductivity. This can be highly detrimental to lithium deposition and may result in dendrite formation. Here, a polyethylene oxide-based electrolyte with improved thermal responses is developed by incorporating 2D boron nitride (BN) nanoflakes. The results show that the BN additive also enhances ionic and mechanical properties of the electrolyte. More uniform Li stripping/deposition and reversible cathode reactions are achieved, which in turn enable all-solid-state lithium-sulfur cells with superior performances.

Designing Comb-Chain Crosslinker-Based Solid Polymer Electrolytes for Additive-Free All-Solid-State Lithium Metal Batteries

Developing solid polymer electrolytes (SPEs) is a promising approach to realize practical dendrite-free lithium metal batteries (LMBs). Tuning the nanoscale polymer network chemsitry is of critical importance for SPE design. In this work, we took lessons from the rubber chemistry and developed a series of comb-chain crosslinker-based SPEs (ConSPEs) using a preformed polymer as the multifunctional crosslinker. The high-functionality crosslinker increased the connectivity of nanosized cross-linked domains, which led to a robust network with dramatically improved toughness and superior lithium dendrite resistance even at a current density of 2 mA cm^-2. The uniform and flexile network also dramatically improved the anodic stability to over 5.3 V versus Li/Li⁺. Additive-free, all-solid-state LMBs with the ConSPE showed high discharge capacity and stable cycling up to 10 C rate, and could be stably cycled at 25 °C. Our results demonstrated that ConSPEs are promising for high-performance and dendrite-free LMBs.

Thiol-Branched Solid Polymer Electrolyte Featuring High Strength, Toughness, and Lithium Ionic Conductivity for Lithium-Metal Batteries

Lithium-metal batteries (LMBs) with high energy densities are highly desirable for energy storage, but generally suffer from dendrite growth and side reactions in liquid electrolytes; thus the need for solid electrolytes with high mechanical strength, ionic conductivity, and compatible interface arises. Herein, a thiol-branched solid polymer electrolyte (SPE) is introduced featuring high Li⁺ conductivity (2.26 × 10^-4 S cm^-1 at room temperature) and good mechanical strength (9.4 MPa)/toughness (≈500%), thus unblocking the tradeoff between ionic conductivity and mechanical robustness in polymer electrolytes. The SPE (denoted as M-S-PEGDA) is fabricated by covalently cross-linking metal-organic frameworks (MOFs), tetrakis (3-mercaptopropionic acid) pentaerythritol (PETMP), and poly(ethylene glycol) diacrylate (PEGDA) via multiple CSC bonds. The SPE also exhibits a high electrochemical window (>5.4 V), low interfacial impedance (<550 Ω), and impressive Li⁺ transference number (t_Li+ = 0.44). As a result, Li||Li symmetrical cells with the thiol-branched SPE displayed a high stability in a >1300 h cycling test. Moreover, a Li|M-S-PEGDA|LiFePO₄ full cell demonstrates discharge capacity of 143.7 mAh g^-1 and maintains 85.6% after 500 cycles at 0.5 C, displaying one of the most outstanding performances for SPEs to date.