A Novel N-Halamine Biocidal Nanofibrous Membrane for Chlorine Rechargeable Rapid Water Disinfection Applications

Disinfecting pathogenic contaminated water rapidly and effectively on sites is one of the critical challenges at point-of-use (POU) situations. Currently available technologies are still suffering from irreversible depletion of disinfectants, generation of toxic by-products, and potential biofouling problems. Herein, we developed a chlorine rechargeable biocidal nanofibrous membrane, poly(acrylonitrile-co-5-methyl-5-(4'-vinylphenyl)imidazolidine-2,4-dione) (P(AN-VAPH)), via a combination of a free radical copolymerization reaction and electrospun technology. The copolymer exhibits good electrospinnability and desirable mechanical properties. Also, the 5-methyl-5-(4'-vinylphenyl)imidazolidine-2,4-dione (VAPH) moieties containing unique hydantoin structures are able to be chlorinated and converted to halamine structures, enabling the P(AN-VAPH) nanofibrous membrane with rapid and durable biocidal activity. The chlorinated P(AN-VAPH) nanofibrous membranes showed intriguing features of unique 3D morphological structures with large specific surface area, good mechanical performance, rechargeable chlorination capacity (>5000 ppm), long-term durability, and desirable biocidal activity against both bacteria and viruses (>99.9999% within 2 min of contact). With these attributes, the chlorinated P(AN-VAPH) membranes demonstrated promising disinfecting efficiency against concentrated bacteria-contaminated water during direct filtration applications with superior killing capacity and high flowing flux (5000 L m^-2 h^-1).

Correlation between Protonation of Tailor-Made Polypiperazines and Endosomal Escape for Cytosolic Protein Delivery

Responsive polymers, which become protonated at decreasing pH, are considered a milestone in the development of synthetic cell entry vectors. Exact correlations between their properties and their ability to escape the endosome, however, often remain elusive due to hydrophobic interactions or limitations in the design of water-soluble materials with suitable basicity. Here, we present a series of well-defined, hydrophilic polypiperazines, where systematic variation of the amino moiety facilitates an unprecedented fine-tuning of the basicity or pK_a value within the physiologically relevant range (pH 6-7.4). Coincubation of HEK 293T cells with various probes, including small fluorophores or functioning proteins, revealed a rapid increase of endosomal release for polymers with pK_a values above 6.5 or 7 in serum-free or serum-containing media, respectively. Similarly, cytotoxic effects became severe at increased pK_a values (>7). Although the window for effective transport appears narrow, the discovered correlations offer a principal guideline for the design of effective polymers for endosomal escape.

Rational Design of an Antifungal Polyacrylamide Library with Reduced Host-Cell Toxicity

Life-threatening invasive fungal infections represent an urgent threat to human health worldwide. The limited set of antifungal drugs has critical constraints such as resistance development and/or adverse side effects. One approach to overcome these limitations is to mimic naturally occurring antifungal peptides called defensins. Inspired by their advantageous amphiphilic properties, a library of 35 synthetic, linear, ternary polyacrylamides was prepared by controlled/living radical polymerization. The effect of the degree of polymerization (20, 40, and 100) and varying hydrophobic functionalities (branched, linear, cyclic, or aromatic differing in their number of carbons) on their antifungal activity was investigated. Short copolymers with a calculated log P of ∼1.5 revealed optimal activity against the major human fungal pathogen Candida albicans and other pathogenic fungal species with limited toxicity to mammalian host cells (red blood cells and fibroblasts). Remarkably, selected copolymers outperformed the commercial antifungal drug amphotericin B, with respect to the therapeutic index, highlighting their potential as novel antifungal compounds.

High-Strength, Strongly Bonded Nanocomposite Hydrogels for Cartilage Repair

Polyacrylamide-based hydrogels are widely used as potential candidates for cartilage replacement. However, their bioapplicability is sternly hampered due to their limited mechanical strength and puncture resistance. In the present work, the strength of polyacrylamide (PAM) hydrogels was increased using titanium oxide (TiO₂) and carbon nanotubes (CNTs) separately and a combination of TiO₂ with CNTs in a PAM matrix, which was interlinked by the bonding between nanoparticles and polymers with the deployment of density functional theory (DFT) approach. The synergistic effect and strong interfacial bonding of TiO₂ and CNT nanoparticles with PAM are attributed to high compressive strength, elastic modulus (>0.43 and 2.340 MPa, respectively), and puncture resistance (estimated using the needle insertion test) for the PAM-TiO₂-CNT hydrogel. The PAM-TiO₂-CNT composite hydrogel revealed a significant self-healing phenomenon along with a sign toward the bioactivity and cytocompatibility by forming the apatite crystals in simulated body fluid as well as showing a cell viability of ∼99%, respectively. Furthermore, for new insights on interfacial bonding and structural and electronic features involved in the hydrogels, DFT was used. The PAM-TiO₂-CNT composite model, constructed by two interfaces (PAM-TiO₂ and PAM-CNT), was stabilized by H-bonding and van der Waals-type interactions. Employing the NCI plot, HOMO-LUMO gap, and natural population analysis tools, the PAM-TiO₂-CNT composite has been found to be most stable. Therefore, the prepared polyacrylamide hydrogels in combination with the TiO₂ and CNT can be a remarkable nanocomposite hydrogel for cartilage repair applications.

Photodegradable Polyacrylamide Gels for Dynamic Control of Cell Functions

Cross-linked polyacrylamide hydrogels are commonly used in biotechnology and cell culture applications due to advantageous properties, such as the precise control of material stiffness and the attachment of cell adhesive ligands. However, the chemical and physical properties of polyacrylamide gels cannot be altered once fabricated. Here, we develop a photodegradable polyacrylamide gel system that allows for a dynamic control of polyacrylamide gel stiffness with exposure to light. Photodegradable polyacrylamide hydrogel networks are produced by copolymerizing acrylamide and a photocleavable ortho-nitrobenzyl (o-NB) bis-acrylate cross-linker. When the hydrogels are exposed to light, the o-NB cross-links cleave and the stiffness of the photodegradable polyacrylamide gels decreases. Further examination of the effect of dynamic stiffness changes on cell behavior reveals that in situ softening of the culture substrate leads to changes in cell behavior that are not observed when cells are cultured on presoftened gels, indicating that both dynamic and static mechanical environments influence cell fate. Notably, we observe significant changes in nuclear localization of YAP and cytoskeletal organization after in situ softening; these changes further depend on the type and concentration of cell adhesive proteins attached to the gel surface. By incorporating the simplicity and well-established protocols of standard polyacrylamide gel fabrication with the dynamic control of photodegradable systems, we can enhance the capability of polyacrylamide gels, thereby enabling cell biologists and engineers to study more complex cellular behaviors that were previously inaccessible using regular polyacrylamide gels.

Seven-year efficacy and safety outcomes of Bulkamid for the treatment of stress urinary incontinence

AIMS

Bulking agents are a minimally invasive treatment option for women with stress urinary incontinence (SUI) or stress-predominant mixed urinary incontinence (MUI). The aim of this study was to evaluate long-term efficacy and safety following treatment with Bulkamid as a primary procedure for SUI or stress-predominant MUI.

METHODS

This was an Institutional Review Board-approved single-center retrospective study of female patients with SUI or stress-predominant MUI who had undergone injection with Bulkamid since 2005 and had completed 7 years of follow up. The primary endpoint was patient satisfaction measured on a four-point scale as cured, improved, unchanged, or worse. Secondary outcomes included the number of incontinence pads used, International Consultation on Incontinence Questionnaire-Short Form (ICIQ-UI SF) scores, Visual Analog Scale Quality of Life (VAS QoL), reinjection rates, and perioperative and postoperative complications.

RESULTS

A total of 1,200 patients were treated with Bulkamid since 2005 and of these, 388 (32.3%) had completed 7 years of follow-up. A total of 67.1% of the patients reported feeling cured or improved if Bulkamid was a primary procedure, 11.1% reported no change, and 2.3% reported worsening of incontinence. A total of 19.5% of patients received a subsequent other incontinence procedure. The ICIQ-UI SF was reduced by 8.6 points. VAS QoL improved by a mean of 4.3 points. Postoperative complications were transient. Prolonged bladder emptying time was reported in 15.3% of patients and urinary tract infection in 3.5%.

CONCLUSIONS

Bulkamid injections are an effective and safe first-line treatment option for women with SUI or stress-predominant MUI providing durable outcomes at 7 years.

Preparation and characterization of human keratinocyte-fibroblast cell sheets constructed using PNIAM-co-AM grafted surfaces for burn wound healing

Autologous skin grafting, the standard treatment for severe burns, is sometimes not possible due to the limited available skin surfaces for the procedure. With advances in tissue engineering, various cell-based skin substitutes have been developed to serve as skin replacements and to promote tissue regeneration and healing. In this work, we propose the use of cell sheet technology to fabricate keratinocyte-fibroblast tissue constructs from the temperature-responsive poly(N-isoproprylacrylamide-co-acrylamide) (PNIAM-co-AM) grafted surfaces for the treatment of burn wounds. The characteristics of the human keratinocyte and fibroblast cell sheets harvested using PNIAM-co-AM grafted surfaces were similar to those cell sheets detached from the commercially-available UpCell^TM plates. Upon lowering the incubation temperature, confluent keratinocytes and fibroblasts could be detached as intact sheets, consisting of biologically active cells, as indicated by their high cell viability and their reattachment, migratory, and proliferative activities. A histological analysis of the stratified keratinocyte-fibroblast cell sheets revealed the evidence of cell migration and tissue reorganization to form two distinct epidermal and dermal layers, quite similar to the skin tissue's structure. In addition, the keratinocyte-fibroblast sheets could synthesize and release significant amounts of essential cytokines and growth factors involved in regulating the wound healing process, including IL-1α, IL-6, TNF-α, VEGF, and bFGF, implying the therapeutic effect of these cell sheets, which could be beneficial to accelerate tissue repair and regeneration, leading to faster wound healing.

Potential of antimicrobial topical gel with synthesized biogenic silver nanoparticle using Rhodomyrtus tomentosa leaf extract and silk sericin

OBJECTIVE

Silver nanoparticles synthesized using Rhodomyrtus tomentosa leaf extract and silk sericin were used to functionalize carbopol 940 gel for topical applications.

RESULTS

UV-vis spectra presented surface plasmon resonance at 426 nm, transmission electron microscopy revealed that nanoparticles were spherical with an average size of 25-50 nm. X-ray diffraction presented crystalline silver nanoparticles with zeta potential of ≈ - 30 mV. FTIR spectra showed a reduction of silver nitrate indicated by the shift in -OH at 2958 cm^-1. The silver nanoparticle demonstrated broad-spectrum antimicrobial activity against Gram-positive, Gram-negative and fungi with MIC ranging between 0.26 and 2.10 μg mL^-1, respectively. MIC of hydrogel ranged between 1.05-2.10 μg mL^-1 with cell viability of 89%. Spreadability and extrudability of gel were 9.3 ± 0.85 s and 19.85 ± 0.03%, respectively with first order of fickian diffusion.

CONCLUSIONS

The silver nanoparticle gel exhibited an effective antimicrobial property, hence can be exploited for topical applications.

Smart, Photothermally Activated, Antibacterial Surfaces with Thermally Triggered Bacteria-Releasing Properties

The development of effective antibacterial surfaces to prevent the attachment of pathogenic bacteria and subsequent bacterial colonization and biofilm formation is critically important for medical devices and public hygiene products. In the work reported herein, a smart antibacterial hybrid film based on tannic acid/Fe³⁺ ion (TA/Fe) complex and poly(N-isopropylacrylamide) (PNIPAAm) is deposited on diverse substrates. This surface is shown to have bacteria-killing and bacteria-releasing properties based on, respectively, near-infrared photothermal activation and subsequent cooling. The TA/Fe complex has three roles in this system: (i) as a universal adhesive "anchor" for surface modification, (ii) as a high-efficiency photothermal agent for ablation of attached bacteria (including multidrug resistant bacteria), and (iii) as a robust linker for immobilization of NH₂-terminated PNIPAAm via either Michael addition or Schiff base formation. Moreover, because of the thermoresponsive properties of the immobilized PNIPAAm, almost all of the killed bacteria and other debris can be removed from the surface simply by lowering the temperature. It is shown that this hybrid film can maintain good antibacterial performance after being used for multiple "kill-and-release" cycles and can be applied to various substrates regardless of surface chemistry or topography, thus providing a broadly applicable, simple, and reliable solution to the problems associated with surface-attached bacteria in various healthcare applications.

Antioxidant, anti-inflammatory and healing potential of ethyl acetate fraction of Bauhinia ungulata L. (Fabaceae) on in vitro and in vivo wound model

The present work aimed to investigate the antioxidant, anti-inflammatory and wound healing potential of ethyl acetate fraction from Bauhinia ungulata L. (FABU) on in vitro and in vivo models. Wound healing assay using human lung adenocarcinoma A549 cell line was employed to evaluate the ability of FABU in modulating cell migration. In addition, a surgical wound model in C57BL/6 mice was used to study the healing potential of FABU incorporated into gel carbomer 940 (Carbopol®). Evaluation of lipid peroxidation, inflammatory and anti-inflammatory mediator gene expression, rate of wound closure, and histological analysis were done. FABU significantly reduced the gap area in in vitro wound healing assay, 24 h after treatment. In the animal model, FABU at 0.5% topically applied once-daily for 5 days to the surgical wounds significantly reduced the lesion area. Moreover, it significantly decreased the levels of lipid peroxidation in the lesions and decreased the relative gene expression levels of IL-1β and TNF-α in the injured region. In conclusion, our study suggests that Bauhinia ungulata can effectively promote the wound healing, probably by regulating the inflammatory environment during the early stages of the process.

Is it necessary to pre-treat Dentine before GIC Restorations? Evidence from an in Vitro Study

The aim of this study was to assess the influence of different pre-treatment approaches on glass ionomer cement (GIC) bond strength (BS) to dentine. Sixty bovine incisors were allocated into six groups according to substrate - sound or caries-affected dentine; and substrate pre-treatment approach - no conditioning (control), polyacrylic acid for 10 s and phosphoric acid for 7 s. Teeth in the caries-affected dentine group were previously submitted to cariogenic pH-cycling challenge. After dentine pre-treatment, according to experimental groups, polyethylene tubes were placed on flat dentine surfaces and filled with GIC. Teeth were stored in distilled water for 24 h at 37 °C and then submitted to microshear test (0.5 mm/min). Failure pattern analysis was performed under stereomicroscope (400x). Data were analysed using two-way ANOVA and Tukey's test (α=5%). Statistically significant differences were found for the pre-treatment approach, regardless of substrate (p<0.001). The polyacrylic acid group and control group had similar BS values, and were both better than the phosphoric acid group. In general, GIC had better bonding performance in sound dentine than in caries-affected dentine. In conclusion, dentine pre-treatment with polyacrylic acid did not improve the performance of GIC restoration on clinically relevant substrates.

Evaluation of Microbial Adhesion and Biofilm Formation on Nano-Structured and Nano-Coated Ortho-Prosthetic Materials by a Dynamic Model

The bio-engineering technologies of medical devices through nano-structuring and coating was recently proposed to improve biocompatibility and to reduce microbial adhesion in the prevention of implantable device-related infections. Our aim was to evaluate the ability of new nano-structured and coated materials to prevent the adhesion and biofilm formation, according to the American Standard Test Method ASTM-E2647-13. The materials composition was determined by X-ray Fluorescence and Laser Induced Breakdown Spectroscopy. Silver release was evaluated by Inductively Coupled Plasma Mass Spectrometry analysis. The gene expression levels of the Quorum Sensing Las and Rhl system were evaluated by the ΔΔCt method. The Log bacterial density (Log CFU/cm²) on TiAl6V4 was 4.41 ± 0.76 and 4.63 ± 1.01 on TiAl6V4-AgNPs compared to 2.57 ± 0.70 on CoCr and 2.73 ± 0.61 on CoCr-AgNPs (P < 0.0001, A.N.O.V.A.- one way test). The silver release was found to be equal to 17.8 ± 0.2 µg/L after the batch phase and 1.3 ± 0.1 µg/L during continuous flow. The rhlR gene resulted in a 2.70-fold increased expression in biofilm growth on the silver nanoparticles (AgNPs) coating. In conclusion, CoCr showed a greater ability to reduce microbial adhesion, independently of the AgNPs coating. The silver release resulted in promoting the up-regulation of the Rhl system. Further investigation should be conducted to optimize the effectiveness of the coating.

Shape-morphing living composites

This work establishes a means to exploit genetic networks to create living synthetic composites that change shape in response to specific biochemical or physical stimuli. Baker's yeast embedded in a hydrogel forms a responsive material where cellular proliferation leads to a controllable increase in the composite volume of up to 400%. Genetic manipulation of the yeast enables composites where volume change on exposure to l-histidine is 14× higher than volume change when exposed to d-histidine or other amino acids. By encoding an optogenetic switch into the yeast, spatiotemporally controlled shape change is induced with pulses of dim blue light (2.7 mW/cm2). These living, shape-changing materials may enable sensors or medical devices that respond to highly specific cues found within a biological milieu.

Importance of Polyacrylamide Hydrogel Diverse Chains and Cross-Linking Density for Cell Proliferation, Aging, and Death

Diverse chains and cross-linking density of polymers are important for cell proliferation, aging, and death. In this study, by controlling the component ratio of N,N'-methylenebisacrylamide (Bis)/acrylamide (Acr), we prepared polyacrylamide (PAM) hydrogels with three different polymer structures using ultraviolet irradiation. Moreover, we quantified their Flory's cross-linking densities, gel concentrations, and mechanical properties and evaluated their influence to HL-7702 liver cell behavior and metabolism. Results showed that PAM hydrogel at a ratio of Bis/Acr = 1:50 (Acr-50) owned the highest cross-linking density (0.04), which provided abundant binding sites for cell adhesion and allowed for rapid cell proliferation. On the basis of the binding sites, cells had strong traction interaction from fibrillate adhesion with the polymers, allowed easy cell migration, and induced the living cell aggregations with a diameter of 800 μm. Cells in aggregation exhibited healthy cell phenotypes and functions, and also the mitosis of the cells in aggregation is exactly the same with the cells in tissue. It is concluded that cell proliferation, aging, and death can be controlled by adjusting the cross-linking density and diverse chains of matrix hydrogels. This work will be helpful to design new functional soft biomaterials for tissue regeneration in the future.

Construction of Biofunctionalized Anisotropic Hydrogel Micropatterns and Their Effect on Schwann Cell Behavior in Peripheral Nerve Regeneration

Hydrogels have promising application in tissue regeneration due to their excellent physicochemical and biocompatible properties, whereas anisotropic micropatterns are been proven to directionally induce cell alignment and accelerate cell migration. However, an effect of biofunctionalized anisotropic hydrogel micropatterns on nerve regeneration has rarely been reported. In this study, the anisotropic polyacrylamide (PAM) hydrogel micropatterns with aligned ridge/groove structures were first prepared via in situ free radical polymerization and micromolding, and then biofunctionalized using YIGSR peptide for better promoting cell growth. The morphology, swelling ratio, wettability, mechanical properties, and stability of the prepared hydrogel were characterized. The successful immobilization of YIGSR peptide on the PAM hydrogel was monitored using FTIR, immunofluorescence staining, and ELISA. The effects on adhesion, directional growth, and biological function of Schwann cells were evaluated. The results displayed that the anisotropic PAM hydrogel micropatterns with inner porous structure possessed good stability, swelling, and mechanical properties. The YIGSR peptide could be well immobilized on hydrogel micropatterns with a percentage of 62.6%. The biofunctionalized anisotropic hydrogel micropatterns could effectively regulate the orientation growth of Schwann cells, and obviously up-regulate BDNF (40%) and β-actin (50%) expression compared with single hydrogel micropatterns, without negatively affecting the normal secretion of neurotropic factors by Schwann cells. To the best of our knowledge, this is the first time to study the construction and effect of biofunctionalized anisotropic hydrogel micropatterns on nerve regeneration, which may provide an experimental and theoretical basis for the design and development of artificial implants for nerve regeneration application.

Effects of surface pre-reacted glass-ionomer (S-PRG) eluate on Candida spp.: antifungal activity, anti-biofilm properties, and protective effects on Galleria mellonella against C. albicans infection

Surface pre-reacted glass-ionomer (S-PRG) is a bioactive filler produced by PRG technology, which is applied to various dental materials. The inhibitory effects of S-PRG eluate against Candida, the most common fungal oral pathogen, were investigated. Minimum inhibitory concentrations (MIC) and anti-biofilm activities were tested against Candida albicans, Candida glabrata, Candida krusei, and Candida tropicalis. For the in vivo study, Galleria mellonella was used as a model to evaluate the effects of S-PRG on toxicity, hemocyte counts and candidiasis. The MIC of S-PRG ranged from 5 to 40% (v/v). S-PRG eluate exhibited anti-biofilm activity for all the Candida species tested. Furthermore, injection of S-PRG eluate into G. mellonella was not toxic to the larvae and protected G. mellonella against experimental candidiasis. In addition, S-PRG eluate inhibited biofilm formation by C. albicans, C. glabrata, C. krusei, and C. tropicalis and exerted protective effects on G. mellonella against experimental candidiasis in vivo.

Influence of Hydrolyzed Polyacrylamide Hydrogel Stiffness on Podocyte Morphology, Phenotype, and Mechanical Properties

Chronic kidney disease is characterized by a gradual decline in renal function that progresses toward end-stage renal disease. Podocytes are highly specialized glomerular epithelial cells which form with the glomerular basement membrane (GBM) and capillary endothelium the glomerular filtration barrier. GBM is an extracellular matrix (ECM) that acts as a mechanical support and provides biophysical signals that control normal podocytes behavior in the process of glomerular filtration. Thus, the ECM stiffness represents an essential characteristic that controls podocyte function. Hydrolyzed Polyacrylamide (PAAm) hydrogels are smart polyelectrolyte materials. Their biophysical properties can be tuned as desired to mimic the natural ECM. Therefore, these hydrogels are investigated as new ECM-like constructs to engineer a podocyte-like basement membrane that forms with cultured human podocytes a functional glomerular-like filtration barrier. Such ECM-like PAAm hydrogel construct will provide unique opportunity to reveal podocyte cell biological responses in an in vivo-like setting by controlling the physical properties of the PAAm membranes. In this work, Hydrolyzed PAAm scaffolds having different stiffness ranging between 0.6-44 kPa are prepared. The correlation between the hydrogel structural and mechanical properties and Podocyte morphology, elasticity, cytoskeleton reorganization, and podocin expression is evaluated. Results show that hydrolyzed PAAm hydrogels promote good cell adhesion and growth and are suitable materials for the development of future 3D smart scaffolds. In addition, the hydrogel properties can be easily modulated over a wide physiological range by controlling the cross-linker concentration. Finally, tuning the hydrogel properties is an effective strategy to control the cells function. This work addressed the complexity of podocytes behavior which will further enhance our knowledge to develop a kidney-on-chip model much needed in kidney function studies in both healthy and diseased states.

Synthetic networks with tunable responsiveness, biodegradation, and molecular recognition for precision medicine applications

Formulations and devices for precision medicine applications must be tunable and multiresponsive to treat heterogeneous patient populations in a calibrated and individual manner. We engineered modular poly(acrylamide-co-methacrylic acid) copolymers, cross-linked into multiresponsive nanogels with either a nondegradable or degradable disulfide cross-linker, that were customized via orthogonal chemistries to target biomarkers of an individual patient's disease or deliver multiple therapeutic modalities. Upon modification with functional small molecules, peptides, or proteins, these nanomaterials delivered methylene blue with environmental responsiveness, transduced visible light for photothermal therapy, acted as a functional enzyme, or promoted uptake by cells. In addition to quantifying the nanogels' composition, physicochemical characteristics, and cytotoxicity, we used a QCM-D method for characterizing nanomaterial degradation and a high-throughput assay for cellular uptake. In conclusion, we generated a tunable nanogel composition for precision medicine applications and new quantitative protocols for assessing the bioactivity of similar platforms.

An oral drug delivery system with programmed drug release and imaging properties for orthotopic colon cancer therapy

Oral drug delivery systems (ODDSs) have attracted considerable attention in relation to orthotopic colon cancer therapy due to certain popular advantages. Unfortunately, their clinical applications are generally limited by the side-effects caused by systemic drug exposure and poor real-time monitoring capabilities. Inspired by the characteristics of pH changes of the gastrointestinal tract (GIT) and specific enzymes secreted by the colonic microflora, we anchored polyacrylic acid (PAA) and chitosan (CS) on Gd3+-doped mesoporous hydroxyapatite nanoparticles (Gd-MHAp NPs) to realize programmed drug release and magnetic resonance imaging (MRI) at the tumor sites. In particular, the grafted PAA, as a pH-responsive switch, could effect controlled drug release in the colon. Further, CS is functionalized as the enzyme-sensitive moiety, which could be degraded by β-glycosidase in the colon. Gadolinium is a paramagnetic lanthanide element used in chelates, working as a contrast medium agent for an MRI system. Interestingly, after oral administration, CS and PAA could protect the drug-loaded nanoparticles (NPs) against variable physiological conditions in the GIT, allowing the drug to reach the colon tumor sites, preventing premature drug release. Enhanced drug concentrations at the colon tumor sites were achieved via this programmed drug release, which subsequently ameliorated the therapeutic effect. In addition, encapsulating both chemotherapeutic (5-fluorouracil, 5-FU) and targeted therapy drug (gefitinib, Gef) within Gd-MHAp NPs produced a synergistic therapeutic effect. In summary, this study demonstrated that such a novel drug system (Gd-MHAp/5-FU/Gef/CS/PAA NPs) could protect, transport, and program drug release locally within the colonic environment; further, this system exhibited a worthwhile therapeutic effect, providing a promising novel treatment strategy for orthotopic colon cancer.

Polyacrylate/polyacrylate-PEG biomaterials obtained by high internal phase emulsions (HIPEs) with tailorable drug release and effective mechanical and biological properties

The paper focuses on the preparation of polyacrylate based biomaterials designed as patches for dermal/transdermal drug delivery using materials obtained by the high internal phase emulsion (HIPE) technique. In particular, butyl acrylate and glycidyl methacrylate were selected, respectively, as backbone and functional monomer while two different crosslinkers, bifunctional or trifunctional, were used to form the covalent network. The influence of PEG on the main properties of the materials was also investigated. The obtained materials show a characteristic and interconnected internal structure as confirmed by SEM studies. By an industrial point of view, an interesting feature of this system is that it can be shaped as needed, in any form and thickness. The physiochemically characterized materials showed a tailorable curcumin (model of hydrophobic drugs) drug release, effective mechanical properties and cell viability and resulted neither pro nor anti-angiogenic as demonstrated in vivo by the chick embryo choriallantoic membrane (CAM) assay. Based on these results, the obtained polyHIPEs could be proposed as devices for dermal/transdermal drug delivery and/or for the direct application on wounded skin.

Thermosensitive Display of Carbohydrate Ligands on Microgels for Switchable Binding of Proteins and Bacteria

The synthesis of carbohydrate-functionalized thermosensitive poly(N-isopropylacrylamide) microgels and their ability to bind carbohydrate-binding pathogens upon temperature switch are reported. It is found that the microgels' binding affinity is increased above their lower critical solution temperature (LCST), enabling thermo-triggerable capture of pathogens. Here, a series of microgels with comparatively low mannose functionalization degrees below 1 mol % is achieved by a single polymerization step. Upon increase in mannose density, the microgel size increases, and the LCST decreases to 26 °C. Clustering with concanavalin A indicated that binding affinity is enhanced by a higher mannose content and by raising the temperature above the LCST. Binding studies with Escherichia coli confirm stronger specific interactions above the LCST and formation of mechanically stable aggregates enabling efficient separation of E. coli by filtration. For small incubation times above the LCST, the microgels' potential to release pathogens again below the LCST is confirmed also. Compared to existing switchable scaffolds, microgels nearly entirely composed of a thermosensitive material undergo a large change in volume, which allows them to drastically vary the density of ligands to switch between capture and release. This straightforward yet novel approach is likely compatible with a broad range of bioactive ligands. Therefore, thermosensitive microgels represent a promising platform for the specific capture or release of cells or pathogens.

Paramagnetic Clusters of Mn3(O2CCH3)6(Bpy)2 in Polyacrylamide Nanobeads as a New Design Approach to a T1- T2 Multimodal Magnetic Resonance Imaging Contrast Agent

There is an increasing need for gadolinium-free magnetic resonance imaging (MRI) contrast agents, particularly for patients suffering from chronic kidney disease. Using a cluster-nanocarrier combination, we have identified a novel approach to the design of biomedical nanomaterials and report here the criteria for the cluster and the nanocarrier and the advantages of this combination. We have investigated the relaxivity of the following manganese oxo clusters: the parent cluster Mn₃(O₂CCH₃)₆(Bpy)₂ (1) where Bpy = 2,2'-bipyridine and three new analogs, Mn₃(O₂CC₆H₄CH═CH₂)₆(Bpy)₂ (2), Mn₃(O₂CC(CH₃)═CH₂)₆(Bpy)₂ (3), and Mn₃O(O₂CCH₃)₆(Pyr)₂ (4) where Pyr = pyridine. The parent cluster, Mn₃(O₂CCH₃)₆(Bpy)₂ (1), had impressive relaxivity ( r₁ = 6.9 mM^-1 s^-1, r₂ = 125 mM^-1 s^-1) and was found to be the most amenable for the synthesis of cluster-nanocarrier nanobeads. Using the inverse miniemulsion polymerization technique (1) in combination with the hydrophilic monomer acrylamide, we synthesized nanobeads (∼125 nm diameter) with homogeneously dispersed clusters within the polyacrylamide matrix (termed Mn₃Bpy-PAm). The nanobeads were surface-modified by co-polymerization with an amine-functionalized monomer. This enabled various postsynthetic modifications, for example, to attach a near-IR dye, Cyanine7, as well as a targeting agent. When evaluated as a potential multimodal MRI contrast agent, high relaxivity and contrast were observed with r₁ = 54.4 mM^-1 s^-1 and r₂ = 144 mM^-1 s^-1, surpassing T₁ relaxivity of clinically used Gd-DTPA chelates as well as comparable T₂ relaxivity to iron oxide microspheres. Physicochemical properties, cellular uptake, and impacts on cell viability were also investigated.

Material stiffness influences the polarization state, function and migration mode of macrophages

Biomaterial implantation is followed by an inflammatory cascade dominated by macrophages, which determine implant acceptance or rejection through pro- and anti-inflammatory polarization states (Anderson et al., 2008; Brown and Badylak, 2013). It is known that chemical signals such as bacterial endotoxins and cytokines (IL4) can direct macrophage polarization (Mantovani et al., 2004); however, recent evidence implicates biophysical cues in this process (McWhorter et al., 2015; Patel et al., 2012). Here we report that THP-1 derived macrophages cultured on collagen-coated polyacrylamide gels of varying stiffness adapt their polarization state, functional roles and migration mode according to the stiffness of the underlying substrate. Through gene expression and protein secretion analysis, we show that stiff polyacrylamide gels (323 kPa) prime macrophages towards a pro-inflammatory phenotype with impaired phagocytosis in macrophages, while soft (11 kPa) and medium (88 kPa) stiffness gels prime cells towards an anti-inflammatory, highly phagocytic phenotype. Furthermore, we show that stiffness dictates the migration mode of macrophages; on soft and medium stiffness gels, cells display Rho-A kinase (ROCK)-dependent, podosome-independent fast amoeboid migration and on stiff gels they adopt a ROCK-independent, podosome-dependent slow mesenchymal migration mode. We also provide a mechanistic insight into this process by showing that the anti-inflammatory property of macrophages on soft and medium gels is ROCK-dependent and independent of the ligand presented to them. Together, our results demonstrate that macrophages adapt their polarization, function and migration mode in response to the stiffness of the underlying substrate and suggest that biomaterial stiffness is capable of directing macrophage behaviour independent of the biochemical cues being presented to them. The results from this study establish an important role for substrate stiffness in directing macrophage behaviour, and will lead to the design of immuno-informed biomaterials that are capable of modulating the macrophage response after implantation. STATEMENT OF SIGNIFICANCE: Biomaterial implantation is followed by an inflammatory cascade dominated by macrophages, which determine implant acceptance or rejection through pro- and anti-inflammatory polarization states. It is known that chemical signals can direct macrophage polarization; however, recent evidence implicates biophysical cues in this process. Here we report that macrophages cultured on gels of varying stiffness adapt their polarization state, functional roles and migration mode according to the stiffness of the underlying substrate. The results from this study establish an important role for substrate stiffness in directing macrophage behaviour, and will lead to the design of immuno-informed biomaterials that are capable of modulating the macrophage response after implantation.

Hypoxia impacts human MSC response to substrate stiffness during chondrogenic differentiation

Tissue engineering strategies often aim to direct tissue formation by mimicking conditions progenitor cells experience within native tissues. For example, to create cartilage in vitro, researchers often aim to replicate the biochemical and mechanical milieu cells experience during cartilage formation in the developing limb bud. This includes stimulating progenitors with TGF-β1/3, culturing under hypoxic conditions, and regulating mechanosensory pathways using biomaterials that control substrate stiffness and/or cell shape. However, as progenitors differentiate down the chondrogenic lineage, the pathways that regulate their responses to mechanotransduction, hypoxia and TGF-β may not act independently, but rather also impact one another, influencing overall cell response. Here, to better understand hypoxia's influence on mechanoregulatory-mediated chondrogenesis, we cultured human marrow stromal/mesenchymal stem cells (hMSC) on soft (0.167 kPa) or stiff (49.6 kPa) polyacrylamide hydrogels in chondrogenic medium containing TGF-β3. We then compared cell morphology, phosphorylated myosin light chain 2 staining, and chondrogenic gene expression under normoxic and hypoxic conditions, in the presence and absence of pharmacological inhibition of cytoskeletal tension. We show that on soft compared to stiff substrates, hypoxia prompts hMSC to adopt more spread morphologies, assemble in compact mesenchymal condensation-like colonies, and upregulate NCAM expression, and that inhibition of cytoskeletal tension negates hypoxia-mediated upregulation of molecular markers of chondrogenesis, including COL2A1 and SOX9. Taken together, our findings support a role for hypoxia in regulating hMSC morphology, cytoskeletal tension and chondrogenesis, and that hypoxia's effects are modulated, at least in part, by mechanosensitive pathways. Our insights into how hypoxia impacts mechanoregulation of chondrogenesis in hMSC may improve strategies to develop tissue engineered cartilage. STATEMENT OF SIGNIFICANCE: Cartilage tissue engineering strategies often aim to drive progenitor cell differentiation by replicating the local environment of the native tissue, including by regulating oxygen concentration and mechanical stiffness. However, the pathways that regulate cellular responses to mechanotransduction and hypoxia may not act independently, but rather also impact one another. Here, we show that on soft, but not stiff surfaces, hypoxia impacts human MSC (hMSC) morphology and colony formation, and inhibition of cytoskeletal tension negates the hypoxia-mediated upregulation of molecular markers of chondrogenesis. These observations suggest that hypoxia's effects during hMSC chondrogenesis are modulated, at least in part, by mechanosensitive pathways, and may impact strategies to develop scaffolds for cartilage tissue engineering, as hypoxia's chondrogenic effects may be enhanced on soft materials.

Two-in-One Platform for High-Efficiency Intracellular Delivery and Cell Harvest: When a Photothermal Agent Meets a Thermoresponsive Polymer

Efficient intracellular delivery of exogenous macromolecules is a key operation in biological research and for clinical applications. Moreover, under particular in vitro or ex vivo conditions, harvesting the engineered cells that maintain good viability is also important. However, none of the methods currently available is truly satisfactory in all respects. Herein, a "two-in-one" platform based on a polydopamine/poly( N-isopropylacrylamide) (PDA/PNIPAAm) hybrid film is developed, showing high efficiency in both cargo delivery and cell harvest without compromising cell viability. Due to the strong photothermal effect of PDA in response to near-infrared irradiation, this film can deliver diverse molecules to a number of cell types (including three hard-to-transfect cells) with an efficiency of ∼99% via membrane-disruption mechanism. Moreover, due to the thermoresponsive properties of PNIPAAm, the cells are harvested from the film without compromising viability by simply decreasing the temperature. A proof-of-concept experiment demonstrates that, using this platform, "recalcitrant" endothelial cells can be transfected by the functional ZNF580 gene and the harvested transfected cells can be recultured with high retention of viability and improved migration. In general, this "two-in-one" platform provides a reliable, universally applicable approach for both intracellular delivery and cell harvest in a highly efficient and nondestructive way, with great potential for use in a wide range of biomedical applications.