Retention and transport of PFOA and its fluorinated substitute, GenX, through water-saturated soil columns

Perfluoro-2-propoxypropanoic acid (GenX) has emerged as a substitute for perfluorooctanoic acid (PFOA) especially since PFOA was listed among the persistent organic pollutants (POPs) by the Stockholm Convention in 2019. However, limited knowledge exists regarding the behavior and mobility of GenX in natural soils hindering the prediction of its environmental fate. This study investigated the mobility and retention of GenX and PFOA in soils under batch and water-saturated flow-through conditions. Batch experiments revealed that GenX has a lower binding affinity to soil than longer-chained PFOA, potentially threatening groundwater resources. Unlike metal-oxides/minerals (ferrihydrite, gibbsite and manganese dioxide), biochar (BC) and activated carbon (AC) amendments significantly enhanced the sorption of both GenX and PFOA in soil. Sorption data on minerals and carbonaceous materials implied that for shorter-chained GenX, the predominant mode of sorption was through electrostatic (ionic) interactions, while for longer-chained PFOA, hydrophobic interactions became progressively more important with increasing chain length. The dynamic flow experiments demonstrated that these soil amendments enhanced the retention of both compounds, thereby decreasing their mobility. Simultaneous injection of both compounds into columns pre-loaded with either PFOA or GenX increased their retardation. GenX sorption was more affected by pre-sorbed PFOA compared to the minimal impact of pre-loaded GenX on PFOA sorption. A newly developed reactive transport model, which incorporates a two-site sorption model and accounts for kinetic-limited processes, accurately predicted the sorption and transport of both compounds in single and binary contamination systems. These findings have important implications for predicting and assessing the fate and mobility of per- and polyfluoroalkyl substances (PFAS) in soils and groundwaters.

Important properties of anion exchange resins for efficient removal of PFOS and PFOA from groundwater

Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) present in various water sources have raised a serious concern on their health risk worldwide. Anion exchange is known to be one of the effective treatment methods but the resin properties suitable for theses contaminants have not been fully understood. We examined four commercially available anion exchange resins with different properties (DIAION™ PA312, HPA25M, UBA120, and WA30) and one polymer-based adsorbent (HP20), for their PFOA and PFOS removal in the batch experiment. All or a part of the selected resins were further characterized for their functional group, surface morphology and pore size distribution. The 72 h batch experiment with the 100 mg/L PFOA or PFOS in the laboratory pure water matrix showed a superior capacity of the strong base anion exchange resins, the porous-type HPA25M and PA312, and the gel-type UBA120, for PFOA removal (92.6-97.9%). Among those resins, the high porous HPA25M was suggested most effective due to its remarkably high reaction rate and effectiveness to PFOS (99.9%). In the groundwater matrix, however, the performance of the those anion exchange resins was generally suppressed, causing up to 71% decrease in their removal rates. The least matrix impact was observed for PFOS removal by HPA25M, which indicated the resin's high selectivity to the contaminant. The physiochemical analysis indicated that the presence of relatively large pores (1 nm-10 nm) over HPA25M played an important role in the PFAS removal.

Products, reactive species and mechanisms of PFOA degradation in a self-pulsing discharge (SPD) plasma reactor

Non-thermal plasma is a promising tool for novel technologies to treat water contaminated by recalcitrant pollutants. We report here on products, reactive species and mechanisms of the efficient degradation of perfluorooctanoic acid (PFOA) achieved with a self-pulsing discharge developed previously in our lab. Air or argon were used as plasma feed gas, ultrapure or tap water as aqueous medium. Identified organic intermediate products arise from chain-shortening and defluorination reactions, the latter achieving not only C-F to C-H exchange (hydro-de-fluorination), as reported in the literature, but also C-F to C-OH exchange (hydroxy-de-fluorination). In contrast with chain-shortening, yielding lower homologues of PFOA via selective cleavage of the C-C bond at the carboxylate group, defluorination occurs at various sites of the alkyl chain giving mixtures of different isomeric products. Plasma generated reactive species were investigated under all experimental conditions tested, using specific chemical probes and optical emission spectroscopy. Cross-analysis of the results revealed a striking direct correlation of energy efficiency for PFOA degradation and for production of plasma electrons. In contrast, no correlation was observed for emission bands of either Ar+ or OH radical. These results indicate a prevalent role of plasma electrons in initiating PFOA degradation using self-pulsing discharge plasma above the liquid.

Alcohols radicals can efficiently reduce recalcitrant perfluorooctanoic acid

Alcohols are commonly used as eluents for the regeneration of per/poly-fluoroalkyl substances (PFASs) adsorbents, but their potential effects on the subsequent treatment of these eluates have not been fully explored. This work investigated the effect of alcohols on perfluorooctanoic acid (PFOA) degradation by persulfate (PS) based advanced oxidation processes. The results showed that ethanol significantly promoted PFOA degradation in thermal/PS system. Under anoxic conditions, 25.5±1.4% or 91.2±1.6% of PFOA was degraded within 48 h in the absence or presence of ethanol. Electron paramagnetic resonance (EPR) detection, free radical quenching experiments, and chemical probe studies clearly demonstrated that the sulfate radicals (SO4•-) generated from PS activation would react with ethanol to form alcohol radicals, which could efficiently degrade PFOA. The transformation pathways of PFOA were proposed based on degradation products analysis and density function theory (DFT) calculation. The reaction between SO4•- and other alcohols could also induce the formation of alcohol radicals and facilitate to the degradation of PFOA. This work represents the positive roles of alcohols in the degradation of PFASs, providing new insights into developing simple and efficient treatments for PFASs eluate or PFAS-contaminated water.

[Optimization and application of caprylic acid precipitation in the purification of monoclonal antibody]

In response to the market demand for therapeutic antibodies, the upstream cell culture scale and expression titer of antibodies have been significantly improved, while the production efficiency of downstream purification process is relatively fall behind, and the downstream processing capacity has become a bottleneck limiting antibody production throughput. Using monoclonal antibody mab-X as experimental material, we optimized the caprylic acid (CA) precipitation process conditions of cell culture fluid and low pH virus inactivation pool, and studied two applications of using CA treatment to remove aggregates and to inactivate virus. Based on the lab scale study, we carried out a 500 L scale-up study, where CA was added to the low pH virus inactivation pool for precipitation, and the product quality and yield before and after precipitation were detected and compared. We found that CA precipitation significantly reduced HCP residuals and aggregates both before and after protein A affinity chromatography. In the aggregate spike study, CA precipitation removed about 15% of the aggregates. A virus reduction study showed complete clearance of a model retrovirus during CA precipitation of protein A purified antibody. In the scale-up study, the depth filtration harvesting, affinity chromatography, low pH virus inactivation, CA precipitation and depth filtration, and cation exchange chromatography successively carried out. The mixing time and stirring speed in the CA precipitation process significantly affected the CA precipitation effect. After CA precipitation, the HCP residue in the low pH virus inactivation solution decreased 895 times. After precipitation, the product purity and HCP residual meet the quality criteria of monoclonal antibodies. CA precipitation can reduce the chromatography step in the conventional purification process. In conclusion, CA precipitation in the downstream process can simplify the conventional purification process, fully meet the purification quality criterion of mab-X, and improve production efficiency and reduce production costs. The results of this study may promote the application of CA precipitation in the purification of monoclonal antibodies, and provide a reference for solving the bottleneck of the current purification process.

Complete defluorination of perfluorooctanoic acid (PFOA) by ultrasonic pyrolysis towards zero fluoro-pollution

Advanced oxidation/reduction of PFAS is challenged and concerned by the formation of toxic, short-chain intermediates during water treatments. In this study, we investigated the complete defluorination of PFOA by ultrasound/persulfate (US/PS) with harmless end-products of CO₂, H₂O, and F^‒ ions. We observed 100% defluorination after 4 h of US treatment alone with a power input of 900 W. PS addition, however, suppressed defluorination. We demonstrated by kinetics-fitted Langmuir-type adsorption modeling, the added PS increased competition with PFOA for adsorption sites on the bubble-water interface where radical oxidation and pyrolysis may occur. Providing sulfate (SO₄^•-) and hydroxyl (^•OH) radicals by means other than US did not defluorinate PFOA, indicating that pyrolysis likely contributes to the high defluorination performance. Bond dissociation energies for CC and CF were independent of pressure but decreased at elevated temperatures within cavitation bubbles (i.e., 5000 K) favoring the pyrolysis reactions. Furthermore, bond length calculations indicated that PFOA cleavage only begins to occur at temperatures in excess of those generated at the bubble interface (i.e., >1500 K) at the femtosecond level. This suggests that PFOA vaporizes or injects by nanodrops upon attachment to the cavitation bubble, enters the bubble, and is then cleaved within the bubble by pyrolysis. Our research in low-frequency ultrasonic horn system challenges the previous founding that defluorination of PFOA initiates and occurs at the bubble-water interface. We describe here that supplementing US-based processes with complementary treatments may have undesired effects on the efficacy of US. The mechanistic insights will further promote the implementation of US technology for PFAS treatment in achieving the zero fluoro-pollution goal.

Degradation of Perfluorooctanoic Acid on Aluminum Oxide Surfaces: New Mechanisms from Ab Initio Molecular Dynamics Simulations

Perfluorooctanoic acid (PFOA) is a part of a large group of anthropogenic, persistent, and bioaccumulative contaminants known as per- and polyfluoroalkyl substances (PFAS) that can be harmful to human health. In this work, we present the first ab initio molecular dynamics (AIMD) study of temperature-dependent degradation dynamics of PFOA on (100) and (110) surfaces of γ-Al₂O₃. Our results show that PFOA degradation does not occur on the pristine (100) surface, even when carried out at high temperatures. However, introducing an oxygen vacancy on the (100) surface facilitates an ultrafast (<100 fs) defluorination of C-F bonds in PFOA. We also examined degradation dynamics on the (110) surface and found that PFOA interacts strongly with Al(III) centers on the surface of γ-Al₂O₃, resulting in a stepwise breaking of C-F, C-C, and C-COO bonds. Most importantly, at the end of the degradation process, strong Al-F bonds are formed on the mineralized γ-Al₂O₃ surface, which prevents further dissociation of fluorine into the surrounding environment. Taken together, our AIMD simulations provide critical reaction mechanisms at a quantum level of detail and highlight the importance of temperature effects, defects, and surface facets for PFOA degradation on reactive surfaces, which have not been systematically explored or analyzed.

Electrochemical degradation of PFOA and its common alternatives: Assessment of key parameters, roles of active species, and transformation pathway

This study investigates an electrochemical approach for the treatment of water polluted with per- and poly-fluoroalkyl substances (PFAS), looking at the impact of different variables, contributions from generated radicals, and degradability of different structures of PFAS. Results obtained from a central composite design (CCD) showed the importance of mass transfer, related to the stirring speed, and the amount of charge passed through the electrodes, related to the current density on decomposition rate of PFOA. The CCD informed optimized operating conditions which we then used to study the impact of solution conditions. Acidic condition, high temperature, and low initial concentration of PFOA accelerated the degradation kinetic, while DO had a negligible effect. The impact of electrolyte concentration depended on the initial concentration of PFOA. At low initial PFOA dosage (0.2 mg L^-1), the rate constant increased considerably from 0.079 ± 0.001 to 0.259 ± 0.019 min^-1 when sulfate increased from 0.1% to 10%, likely due to the production of SO₄^•-. However, at higher initial PFOA dosage (20 mg L^-1), the rate constant decreased slightly from 0.019 ± 0.001 to 0.015 ± 0.000 min^-1, possibly due to the occupation of active anode sites by excess amount of sulfate. SO₄^•- and ^•OH played important roles in decomposition and defluorination of PFOA, respectively. PFOA oxidation was initiated by one electron transfer to the anode or SO₄^•-, undergoing Kolbe decarboxylation where yielded perfluoroalkyl radical followed three reaction pathways with ^•OH, O₂ and/or H₂O. PFAS electrooxidation depended on the chemical structures where the decomposition rate constants (min^-1) were in the order of 6:2 FTCA (0.031) > PFOA (0.019) > GenX (0.013) > PFBA (0.008). PFBA with a shorter chain length and GenX with -CF₃ branching had slower decomposition than PFOA. While presence of C-H bonds makes 6:2 FTCA susceptible to the attack of ^•OH accelerating its decomposition kinetic. Conducting experiments in mixed solution of all studied PFAS and in natural water showed that the co-presence of PFAS and other water constituents (organic and inorganic matters) had adverse effects on PFAS decomposition efficiency.

Thermal decomposition mechanism and kinetics of perfluorooctanoic acid (PFOA) and other perfluorinated carboxylic acids: a theoretical study

Perfluorinated carboxylic acids (PFCAs), particularly perfluorooctanoic acid (PFOA), are broadly used for chemical synthesis and as surfactants, but they pose a serious threat to humans and wildlife because of toxicity concerns, environmental stability, and tendency to bioaccumulate. PFCA waste is commercially treated in incinerators, however, their exact degradation mechanisms are still unknown. In the present work, we report the decomposition mechanism and kinetics of straight-chain PFCAs using quantum chemistry and reaction rate theory calculations. Degradation mechanisms and associated kinetic parameters are determined for the complete series of straight-chain PFCAs from perfluorononanoic acid (C₈F₁₇COOH, C9) to fluoroformic acid (FCOOH, C1). Our results show that PFCA decomposition follows an analogous mechanism to perfluorinated sulfonic acids, where HF elimination from the acid head group produces a three membered ring intermediate, in this case a perfluorinated α-lactone. These perfluorinated α-lactones are short-lived intermediates that readily degrade into perfluorinated acyl fluorides and CO, thus shortening the perfluorinated chain by one C atom. Because perfluorinated acyl fluorides are known to hydrolyse to PFCAs, repeated cycles of carboxylic acid decomposition followed by acyl fluoride hydrolysis provides a mechanism for the complete mineralization of PFCAs to HF, CO, CO₂, COF₂, and CF₂ during thermal decomposition in the presence of water vapor. These results provide a theoretical basis for future detailed chemical kinetic studies of incineration reactors and will assist in their design and optimisation so as to more efficiently decompose PFCAs and related waste.

Nitrate promoted defluorination of perfluorooctanoic acid in UV/sulfite system: Coupling hydrated electron/reactive nitrogen species-mediated reduction and oxidation

A significantly accelerated defluorination of recalcitrant perfluorooctanoic acid (PFOA) was explored with the co-present nitrate (20 mg L^-1) by UV/sulfite treatment (UV/sulfite-nitrate). The deep defluorination of PFOA and complete denitrification of nitrate were simultaneously achieved in UV/sulfite-nitrate system. At the initial 30 min, PFOA defluorination exhibited an induction period, exactly corresponding to the removal of the co-existed nitrate. Upon the induction period passed, an accelerated removal of PFOA (5 mg L^-1) occurred, nearly 100% defluorination ratio reached within 2 h. Compared with those in UV/sulfite, the kinetics of PFOA decay, defluorination, and transformation product formations were greatly enhanced in UV/sulfite-nitrate system. Reactive nitrogen species (RNS) generated from e_aq^--induced reduction of nitrate were found to play significant roles on the promoted defluorination apart from e_aq^--mediated reductive defluorination. The investigations on solution pH (7.0-11.0) confirmed that the reductive defluorination of PFOA was more efficient under alkaline conditions, however, the presence of nitrate can promote the defluorination even under neutral pH. Theoretical calculations of Fukui function demonstrated that RNS could easily launch electrophilic attack toward H-rich moieties of fluorotelomer carboxylates (FTCAs, C_nF_2n+1-(CH₂)_m-COO^-), more persistent intermediates (formed via H/F exchange), and convert FTCAs into shorter-chain perfluorinated carboxylic acids, thus facilitating the deep defluorination. Along with the analysis on the denitrification products, the liberation of fluoride ions and generated intermediates, possible decomposition pathways were proposed. This work highlights the indispensable synergy from e_aq^-/RNS with integrated reduction and oxidation on PFOA defluorination and will advance remediation technologies of perfluorinated compound contaminated water.

The Need for Testing Isomer Profiles of Perfluoroalkyl Substances to Evaluate Treatment Processes

Many environmentally relevant poly-/perfluoroalkyl substances (PFASs) including perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) exist in different isomeric (branched and linear) forms in the natural environment. The isomeric distribution of PFASs in the environment and source waters is largely controlled by the source of contamination and varying physicochemical properties imparted by their structural differences. For example, branched isomers of PFOS are relatively more reactive and less sorptive compared to the linear analogue. As a result, the removal of branched and linear PFASs during water treatment can vary, and thus the isomeric distribution in source waters can influence the overall efficiency of the treatment process. In this paper, we highlight the need to consider the isomeric distribution of PFASs in contaminated matrices while designing appropriate remediation strategies. We additionally summarize the known occurrence and variation in the physicochemical properties of PFAS isomers influencing their detection, fate, toxicokinetics, and treatment efficiency.

Electrochemical Advanced Oxidation of Perfluorooctanoic Acid: Mechanisms and Process Optimization with Kinetic Modeling

Electrochemical advanced oxidation processes (EAOPs) are promising technologies for perfluorooctanoic acid (PFOA) degradation, but the mechanisms and preferred pathways for PFOA mineralization remain unknown. Herein, we proposed a plausible primary pathway for electrochemical PFOA mineralization using density functional theory (DFT) simulations and experiments. We neglected the unique effects of the anode surface and treated anodes as electron sinks only to acquire a general pathway. This was the essential first step toward fully revealing the primary pathway applicable to all anodes. Systematically exploring the roles of valence band holes (h⁺), hydroxyl radicals (HO^•), and H₂O, we found that h⁺, whose contribution was previously underestimated, dominated PFOA mineralization. Notably, the primary pathway did not generate short-chain perfluoroalkyl carboxylic acids (PFCAs), which were previously thought to be the main degradation intermediates, but generated other polyfluorinated alkyl substances (PFASs) that were rapidly degraded upon formation. Also, we developed a simplified kinetic model, which considered all of the main processes (mass transfer with electromigration included, surface adsorption/desorption, and oxidation on the anode surface), to simulate PFOA degradation in EAOPs. Our model can predict PFOA concentration profiles under various current densities, initial PFOA concentrations, and flow velocities.

Supramolecular assemblies of a newly developed indole derivative for selective adsorption and photo-destruction of perfluoroalkyl substances

Per-/polyfluoroalkyl substances (PFASs) contamination has caused worldwide health concerns, and increased demand for effective elimination strategies. Herein, we developed a new indole derivative decorated with a hexadecane chain and a tertiary amine center (named di-indole hexadecyl ammonium, DIHA), which can form stable nanospheres (100-200 nm) in water via supramolecular assembly. As the DIHA nanospheres can induce electrostatic, hydrophobic and van der Waals interactions (all are long-ranged) that operative cooperatively, in addition to the nano-sized particles with large surface area, the DIHA nanocomposite exhibited extremely fast adsorption rates (in seconds), high adsorption capacities (0.764-0.857 g g^-1) and selective adsorption for perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS), outperformed the previous reported high-end PFASs adsorbents. Simultaneously, the DIHA nanospheres can produce hydrated electron (e_aq^-) when subjected to UV irradiation, with the virtue of constraining the photo-generated e_aq^- and the adsorbed PFOA/PFOS molecules entirely inside the nanocomposite. As such, the UV/DIHA system exhibits extremely high degradation/defluorination efficiency for PFOA/PFOS, even under ambient conditions, especially with the advantages of low chemical dosage requirement (μM level) and robust performance against environmental variables. Therefore, it is a new attempt of using supramolecular approach to construct an indole-based nanocomposite, which can elegantly combine adsorption and degradation functions. The novel DIHA nanoemulsion system would shed light on the treatment of PFAS-contaminated wastewater.

Concentrate and degrade PFOA with a photo-regenerable composite of In-doped TNTs@AC

"Concentrate-and-degrade" is an effective strategy to promote mass transfer and degradation of pollutants in photocatalytic systems, yet suitable and cost-effective photocatalysts are required to practice the new concept. In this study, we doped a post-transition metal of Indium (In) on a novel composite adsorptive photocatalyst, activated carbon-supported titanate nanotubes (TNTs@AC), to effectively degrade perfluorooctanoic acid (PFOA). In/TNTs@AC exhibited both excellent PFOA adsorption (>99% in 30 min) and photodegradation (>99% in 4 h) under optimal conditions (25 °C, pH 7, 1 atm, 1 g/L catalyst, 0.1 mg/L PFOA, 254 nm). The heterojunction structure of the composite facilitated a cooperative adsorption mode of PFOA, i.e., binding of the carboxylic head group of PFOA to the metal oxide and attachment of the hydrophobic tail to AC. The resulting side-on adsorption mode facilitates the electron (e^‒) transfer from the carboxylic head to the photogenerated hole (h⁺), which was the major oxidant verified by scavenger tests. Furthermore, the presence of In enables direct electron transfer and facilitates the subsequent stepwise defluorination. Finally, In/TNTs@AC was amenable to repeated uses in four consecutive adsorption-photodegradation runs. The findings showed that adsorptive photocatalysts can be prepared by hybridization of carbon and photoactive semiconductors and the enabled "concentrate-and-degrade" strategy is promising for the removal and degradation of trace levels of PFOA from polluted waters.

New insights into ferric iron-facilitated UV254 photolytic defluorination of perfluorooctanoic acid (PFOA): Combined experimental and theoretical study

UV/Fe³⁺-facilitated PFOA defluorination was often reported and recognized to proceed through a "ligand-to-metal charge transfer (LMCT)" mechanism in the literatures. Sufficient Fe³⁺ supply is important for sustaining the LMCT reaction pathway. In this study, an interesting "excessive defluorination" was observed, even the continuous Fe³⁺ supply was cut off, implying a parallel mechanism strengthening PFOA defluorination. Based the results of intermediate products detection, ¹⁹F NMR analysis, and exploration of electron density alternation, transition energy evolution, and bonds characteristics, remarkable electron density perturbation in [PFOA-Fe]²⁺ was revealed. This effect was triggered by the complexation between PFOA anion and Fe³⁺, diminishing electron shielding on the perfluorinated carbon chain. Hence, the dissociation energy of C-C bonds was reduced by maximally 53% (C4-C5). Once attacked by high-flux UV₂₅₄ photons, the perfluorinated carbon chain underwent scission, and subsequent defluorination was achieved via hydrolysis reactions. This parallel mechanism cooperated with the LMCT mechanism, leading to the observed "excessive defluorination." The degree of UV/Fe³⁺-synergized PFOA defluorination depended on UV₂₅₄ photon flux and Fe³⁺ dosage. High UV₂₅₄ intensity guaranteed fast defluorination kinetics. A [Fe³⁺]/[PFOA] molar ratio near 1 showed the best UV/Fe³⁺ synergic effect on PFOA defluorination.

High energy radiation - Induced cooperative reductive/oxidative mechanism of perfluorooctanoate anion (PFOA) decomposition in aqueous solution

The mechanism of high-energy radiation induced degradation of perfluorooctanoate anion (PFOA, C₇F₁₅COO^-) was investigated in aqueous solutions. Identification and quantification of transient species was performed by pulse radiolysis and of final products by gas and ion chromatography, electrochemical method using fluoride ion-selective electrode and ESI-MS after γ-radiolysis. Experimental data were further supported by kinetic simulations and quantum mechanical calculations. Radiation induced degradation of PFOA includes as a primary step one-electron reduction of PFOA by hydrated electrons (e^-_aq) resulting in formation of [C₇F₁₅COO^-]^●-. The rate constants of this reaction were found to be in the range 7.7 × 10⁷-1.3 × 10⁸ M^-1s^-1 for ionic strength of the solutions in the range 0.01-0.1 M and were independent of pH of the solutions. At pH > 11 [C₇F₁₅COO^-]^●- tends to defluorination whereas at lower pH undergoes protonation forming [C₇F₁₅COOH]^•-. A sequence of consecutive reactions involving [C₇F₁₅COOH]^•- leads to PFOA regeneration what explains a high radiation resistance of PFOA at moderately acidic solutions. A simultaneous presence of oxidizing transient species (^●OH) in the irradiated system enhanced decomposition of (C₇F₁₄)·COO^- as well as [C₇F₁₅COOH]^•-. The key steps in this complex radical mechanism are the reactions of both these radical anions with ^●OH leading to semi-stable products which further undergo consecutive thermal reactions. On the other hand, direct reactions of PFOA with ^●OH and ^●H were found to be relatively slow (7 × 10³ and <4 × 10⁷ M^-1s^-1, respectively) and do not play relevant role in PFOA degradation. Collected for the first time results, such as dependence of selected reaction rate constants and selected products radiation chemical yields on pH as well as finding of several semi-stable products, missing in previous studies, indicate incompleteness of published earlier reaction pathways of PFOA degradation. The presented overall mechanism explains experimental results and verifies previously suggested mechanisms found in the literature.

Synthesis of superparamagnetic MnFe2O4/mSiO2 nanomaterial for degradation of perfluorooctanoic acid by activated persulfate

In this paper, magnetic MnFe₂O₄/mSiO₂ nanocomposites were successfully synthesized, and the activation performance of the materials for persulfate was evaluated by the degradation efficiency of perfluorooctanoic acid. The structure of the catalyst was proved to be a core-shell structure by several characterization methods. The mesoporous silicon coating can effectively avoid the agglomeration of MnFe₂O₄ and at the same time increase the contact area with the reactants. A comparison of different catalyst addition conditions demonstrates that MnFe₂O₄/mSiO₂ can effectively activate the persulfate. The optimal reaction conditions were investigated by several key influencing factors. It was experimentally demonstrated that about 90% of PFOA (10 mg·L^-1) could be decomposed under the conditions of 0.4 g·L^-1 MnFe₂O₄/mSiO₂ and PS, pH 5.68, and 25 °C within 4 h; the defluorination rate reached 58.33%. In addition, the cyclability and stability tests demonstrated that MnFe₂O₄/mSiO₂ is a stable material that can be recycled. Furthermore, XPS characterization and radical scavenging experiments demonstrated that sulfate radicals (SO₄·^-) and hydroxyl radicals (OH) play a major role in the reaction of MnFe₂O₄/mSiO₂ activated PS. Subsequently, the degradation products were detected by high-performance liquid chromatography tandem triple quadrupole mass spectrometry, indicating that the degradation of PFOA is a gradual process of defluorination and decarbonization in the presence of free radicals. Finally, the metal leaching rate is tested to prove that the material meets environmental requirements while reacting efficiently. In conclusion, this study shows that MnFe₂O₄/mSiO₂ is an easily recoverable and highly efficient and stable material that has great potential for PS activation to treat organic pollutants in water.

Development of Improved High-Performance Liquid Chromatography Method for the Determination of Residual Caprylic Acid in Formulations of Human Immunoglobulins

Quality control of human immunoglobulin formulations produced by caprylic acid precipitation necessitates a simple, rapid, and accurate method for determination of residual caprylic acid. A high-performance liquid chromatography method for that purpose was developed and validated. The method involves depletion of immunoglobulins, the major interfering components that produce high background noise, by precipitation with acetonitrile (1:1, v/v). Chromatographic analysis of caprylic acid, preserved in supernatant with no loss, was performed using a reverse-phase C18 column (2.1 × 150 mm, 3 μm) as a stationary phase and water with 0.05% TFA–acetonitrile (50:50, v/v) as a mobile phase at a flow rate of 0.2 mL/min and run time of 10 min. The developed method was successfully validated according to the ICH guidelines. The validation parameters confirmed that method was linear, accurate, precise, specific, and able to provide excellent separation of peaks corresponding to caprylic acid and the fraction of remaining immunoglobulins. Furthermore, a 24−1 fractional factorial design was applied in order to test the robustness of developed method. As such, the method is highly suitable for the quantification of residual caprylic acid in formulations of human immunoglobulins for therapeutic use, as demonstrated on samples produced by fractionation of convalescent anti-SARS-CoV-2 human plasma at a laboratory scale. The obtained results confirmed that the method is convenient for routine quality control.

Caprylic Acid Improves Lipid Metabolism, Suppresses the Inflammatory Response and Activates the ABCA1/p-JAK2/p-STAT3 Signaling Pathway in C57BL/6J Mice and RAW264.7 Cells

OBJECTIVE

This study aimed to investigate the effects of caprylic acid (C8:0) on lipid metabolism and inflammation, and examine the mechanisms underlying these effects in mice and cells.

METHODS

Fifty-six 6-week-old male C57BL/6J mice were randomly allocated to four groups fed a high-fat diet (HFD) without or with 2% C8:0, palmitic acid (C16:0) or eicosapentaenoic acid (EPA). RAW246.7 cells were randomly divided into five groups: normal, lipopolysaccharide (LPS), LPS+C8:0, LPS+EPA and LPS+cAMP. The serum lipid profiles, inflammatory biomolecules, and ABCA1 and JAK2/STAT3 mRNA and protein expression were measured.

RESULTS

C8:0 decreased TC and LDL-C, and increased the HDL-C/LDL-C ratio after injection of LPS. Without LPS, it decreased TC in mice ( P < 0.05). Moreover, C8:0 decreased the inflammatory response after LPS treatment in both mice and cells ( P < 0.05). Mechanistic investigations in C57BL/6J mouse aortas after injection of LPS indicated that C8:0 resulted in higher ABCA1 and JAK2/STAT3 expression than that with HFD, C16:0 and EPA, and resulted in lower TNF-α, NF-κB mRNA expression than that with HFD ( P < 0.05). In RAW 264.7 cells, C8:0 resulted in lower expression of pNF-κBP65 than that in the LPS group, and higher protein expression of ABCA1, p-JAK2 and p-STAT3 than that in the LPS and LPS+cAMP groups ( P < 0.05).

CONCLUSION

Our studies demonstrated that C8:0 may play an important role in lipid metabolism and the inflammatory response, and the mechanism may be associated with ABCA1 and the p-JAK2/p-STAT3 signaling pathway.

Interactions of perfluorooctanoic acid with acyl-CoA thioesterase 1 (Acot1)

Perfluorooctanoic acid (PFOA), a typical representative of per- and polyfluoroalkyl substances (PFASs), is a widely utilized persistent organic pollutant (POP) known to induce liver toxicity in laboratory animals and wildlife. Evidence suggests that PFOA interacts with Acyl-CoA thioesterase 1 (Acot1) to modulate levels of β-oxidation. Specifically, PFOA accelerates β-oxidation, while Acot1 is inhibitory. Few studies have investigated the specific relationship between PFOA and Acot1 and the mechanism of their interaction remains unclear. In the following study, purified rat Acot1 protein was synthesized via bacterial recombination and the structural features that facilitate its binding to PFOA were assessed via molecular docking technology. Additionally, through use of circular dichroism spectroscopy (CD) and isothermal titration calorimetry (ITC) we demonstrate that PFOA binds to WT-Acot1 through electrostatic attraction and low strength non-covalent hydrogen bonding at a molar ratio of 1:1. Furthermore, we identify N326 and H373 amino acid residues as key regulators of the binding process. Together, these findings clarify the interaction pattern of PFOA and Acot1 proteins and provide insight into the specific molecular mechanisms that induce PFOA toxicity in humans and animals.

Propanediol (and) Caprylic Acid (and) Xylitol as a New Single Topical Active Ingredient against Acne: In Vitro and In Vivo Efficacy Assays

In addition to dermatological complications, acne can affect the quality of life of individuals in numerous ways, such as employment, social habits and body dissatisfaction. According to our expertise, caprylic acid and propanediol would not have a direct action on Cutibacterium acnes. Despite this, we investigated the existence of a synergistic effect among xylitol, caprylic acid and propanediol as a mixture of compounds representing a single topical active ingredient that could benefit the treatment against acne. In vitro and in vivo assays were performed to challenge and to prove the efficacy of propanediol, xylitol and caprylic acid (PXCA) against acne. PXCA had its MIC challenged against C. acnes (formerly Propionibacterium acnes) and Staphylococcus aureus, resulting in concentrations of 0.125% and 0.25%, respectively, and it also developed antimicrobial activity against C. acnes (time-kill test). PXCA was able to reduce the 5-alpha reductase expression in 24% (p < 0.01) in comparison with the testosterone group. By the end of 28 days of treatment, the compound reduced the skin oiliness, porphyrin amount and the quantity of inflammatory lesions in participants. According to the dermatologist evaluation, PXCA improved the skin's general appearance, acne presence and size.

The new generation PFAS C6O4 does not produce adverse effects on thyroid cells in vitro

PURPOSE

Per- and poly-fluoroalkyl-substances (PFASs) are synthetic compounds that raised concern due to their potential adverse effects on human health. Long-chain PFAS were banned by government rules in many states, and thus, new emerging PFAS were recently introduced as substitutes. Among these, Perfluoro{acetic acid, 2-[(5-methoxy-1,3-dioxolan-4-yl)oxy]}, ammonium salt (C6O4) was recently introduced to produce a range of food contact articles and literature data about this compound are scanty. The aim of this study was to evaluate the in vitro effects of exposure to C6O4, compared with PFOA and PFOS on thyroid cells.

METHODS

FRTL5 rat-thyroid cell lines and normal human thyroid cells (NHT) were incubated with increasing concentrations of C6O4 for 24, 48, 72, and 144 h to assess cell viability by WST-1. Cell viability was confirmed by AnnexinV/PI staining. Long-chain PFAS (PFOA and PFOS) were used at same concentrations as positive controls. The proliferation of cells exposed to C6O4, PFOA, and PFOS was measured by staining with crystal violet and evaluation of optical density after incubation with SDS. Changes in ROS production by FRTL5 and NHT after exposure to C6O4 at short (10, 20, and 30 min) and long-time points (24 h) were evaluated by cytofluorimetry.

RESULTS

C6O4 exposure did not modify FRTL5 and NHT cell viability at any concentration and/or time points with no induction of necrosis/apoptosis. At difference, PFOS exposure reduced cell viability of FRTL5 while and NHT, while PFOA only in FRTL5. FRTL5 and NHT cell proliferation was reduced by incubation with by PFOA and PFOS, but not with C6O4. ROS production by NHT and FRTL5 cells was not modified after C6O4 exposure, at any time/concentration tested.

CONCLUSIONS

The present in vitro study constitutes the first evaluation of the potential adverse effects of the new emerging PFAS C6O4 in cultured rat and human thyroid cells, suggesting its safety for thyroid cells in vitro.

Production of hyperimmune anti-SARS-CoV-2 intravenous immunoglobulin from pooled COVID-19 convalescent plasma

Background: This study assesses the feasibility of producing hyperimmune anti-COVID-19 intravenously administrable immunoglobulin (C-IVIG) from pooled convalescent plasma (PCP) to provide a safe and effective passive immunization treatment option for COVID-19. Materials & methods: PCP was fractionated by modified caprylic acid precipitation followed by ultrafiltration/diafiltration to produce hyperimmune C-IVIG. Results: In C-IVIG, the mean SARS-CoV-2 antibody level was found to be threefold (104 ± 30 cut-off index) that of the PCP (36 ± 8.5 cut-off index) and mean protein concentration was found to be 46 ± 3.7 g/l, comprised of 89.5% immunoglobulins. Conclusion: The current method of producing C-IVIG is feasible as it uses locally available PCP and simpler technology and yields a high titer of SARS-CoV-2 antibody. The safety and efficacy of C-IVIG will be evaluated in a registered clinical trial (NCT04521309).

Sensory Perception of Non-Deuterated and Deuterated Organic Compounds

The chemical background of olfactory perception has been subject of intensive research, but no available model can fully explain the sense of smell. There are also inconsistent results on the role of the isotopology of molecules. In experiments with human subjects it was found that the isotope effect is weak with acetone and D6 -acetone. In contrast, clear differences were observed in the perception of octanoic acid and D15 -octanoic acid. Furthermore, a trained sniffer dog was initially able to distinguish between these isotopologues of octanoic acid. In chromatographic measurements, the respective deuterated molecule showed weaker interaction with a non-polar liquid phase. Quantum chemical calculations give evidence that deuterated octanoic acid binds more strongly to a model receptor than non-deuterated. In contrast, the binding of the non-deuterated molecule is stronger with acetone. The isotope effect is calculated in the framework of statistical mechanics. It results from a complicated interplay between various thermostatistical contributions to the non-covalent free binding energies and it turns out to be very molecule-specific. The vibrational terms including non-classical zero-point energies play about the same role as rotational/translational contributions and are larger than bond length effects for the differential isotope perception of odor for which general rules cannot be derived.