A comprehensive model for quantifying construction waste in high-rise buildings in India

The construction industry plays a vital role in the economic development of any country. Concurrently, the sector also generates enormous quantities of construction and demolition waste (CDW) that damages the ecology causing environmental pollution and deteriorating human health. Recently, various governments and other organizations realized the importance of implementing construction waste management (CWM) practices to attain sustainability in construction. The current decade can be called a pathway for achieving the 2030 agenda for sustainable development goals in which CWM plays an inevitable role. However, accurately quantifying construction waste is necessary to successfully implement any CDW management plan. A detailed literature review for the current research revealed that limited information on the magnitude of construction waste is available in India. Therefore, the current paper proposes a practically viable model to estimate the waste generation index (construction waste generated per total floor area) of high-rise residential buildings in India. The waste quantification is being done based on the project documents and expert interviews. The methodology is later validated through a high-rise building with G + 18 stories located in Kerala, India. The study indicated that a high-rise concrete framed structure generates 122.3 kg m-2 of waste during construction. It was also noted that, concrete, aggregates and blocks constitute 92% of the total waste generated in the project. The developed model can also be used as a cornerstone for establishing a construction waste database at the regional level.

Manufacturing non-sintered ceramsite from dredged sediment, steel slag, and fly ash for lightweight aggregate: production and characterization

Green and low-carbon materialization for dredged sediment (DS) is limited due to its low pozzolanic activity. In this study, a novel DS-based non-sintered lightweight aggregate (LWA) is developed by steel slag (SS) and fly ash (FA) activation. Process optimization is performed by the response surfaces, and the basic properties and characterization of the optimal product are investigated. Results indicated that the optimized design ceramic aggregate (ODCA) was prepared as follows: raw pellets comprising of 59.2% DS, 5% SS, 35.8% FA, 5% MK, 5% H2O2, and 2‰ foam stabilizer were activated by alkali activator (1.5 weight ratio of 14 M NaOH to water glass) and then cured at 80 °C and 95% humidity for 24 h. The basic and environmental performances of ODCA were in accordance with standards, whose bulk density was as low as 665.8 kg/m3, the high cylinder compressive strength was 6.143 MPa, and leaching concentrations of heavy metals were controllable. The regulation mechanism of LWA performances could be summarized as follows. SS and FA additives played the role for the mechanical strength enhancement and passivation of heavy metals, which promoted the formation of sillimanite, chabazite, and C-S-H / C-S-A-H gels in ODCA. The bulk density of ODCA was greatly reduced by H2O2 addition, where ODCA had an open-pore structure with a median pore size of 4969.75 nm. Note that C-S-H/C-S-A-H were the key hydration products to give ODCA light density and high mechanical strength, simultaneously.

NaH2PO4 synergizes with organic matter to stabilize chromium in tannery sludge

Heavy metal stabilization is an effective method to treat chromium in tannery sludge. Here we show that mainly investigated NaH2PO4 (MSP) and organic matter (OM) to stabilize chromium in tannery sludge. The experimental investigation revealed that the addition of montmorillonite (MMT) and MSP samples showed a significant increase in the percentage of reducible and oxidizable Cr in the former compared to the samples with the addition of MMT. This is attributed to the formation of Cr-O bond, which allows the MSP to undergo an inner-sphere complexation reaction with the metal oxide of Cr via ligand exchange. Significantly, the MSP moiety adsorbs on the surface of OM through monodentate, which increases the adsorption sites of OM for Cr6+ and promotes the reduction of Cr6+ to Cr3+. Moreover, PO43- reacts with Cr3+ to produce CrPO4 precipitation, thus reducing the free Cr3+ content. Finally, DFT calculations confirmed that a ternary system is formed between PO43-, OM, and Cr, and the binding energy is negative, which indicated that PO43- could co-stabilize Cr with OM.

Deep learning-based models for environmental management: Recognizing construction, renovation, and demolition waste in-the-wild

The construction industry generates a substantial volume of solid waste, often destinated for landfills, causing significant environmental pollution. Waste recycling is decisive in managing waste yet challenging due to labor-intensive sorting processes and the diverse forms of waste. Deep learning (DL) models have made remarkable strides in automating domestic waste recognition and sorting. However, the application of DL models to recognize the waste derived from construction, renovation, and demolition (CRD) activities remains limited due to the context-specific studies conducted in previous research. This paper aims to realistically capture the complexity of waste streams in the CRD context. The study encompasses collecting and annotating CRD waste images in real-world, uncontrolled environments. It then evaluates the performance of state-of-the-art DL models for automatically recognizing CRD waste in-the-wild. Several pre-trained networks are utilized to perform effectual feature extraction and transfer learning during DL model training. The results demonstrated that DL models, whether integrated with larger or lightweight backbone networks can recognize the composition of CRD waste streams in-the-wild which is useful for automated waste sorting. The outcome of the study emphasized the applicability of DL models in recognizing and sorting solid waste across various industrial domains, thereby contributing to resource recovery and encouraging environmental management efforts.

Electrocoagulation using Ti/Ti for the remediation and reuse of aqueous Dispersive Blue-79

The entire ecology is contaminated by the synthetic dyes that are widely utilised in the textile industries. They can be handled using a variety of technologies, but an eco-friendly method called electrocoagulation has been used to prevent additional contamination. Textile wastewater containing disperse dyes are successfully treated in Electrocoagulation (EC) utilizing Al, Fe, and Stainless Steel (SS), but it is not cost effective, also the treated water contains certain mg/L of the metals used, along with dye components, which obstructs the reuse of the same. The effects of initial pH, applied voltage, dye concentration, supporting electrolyte, and treatment time on the colour removal efficiency (CRE) and consumption of energy were examined in EC process followed by activated charcoal filtration (hybrid process) with a monopolar Ti/Ti electrode on the remediation of aqueous solution of Dispersive Blue-79 (dye 3G). The maximum CREobtained was 99.4%, chemical oxygen demand (COD) 93%, and biological oxygen demand (BOD) 85%, under the following optimized operating conditions, applied voltage 15 V, pH = 7, concentration of dye, electrolyte 110 mg/L, 0.2 g/L and time = 15 min. The overall operating cost for the treatment of aqueous dye 3G was 0.455US/m3. The mechanism of EC was studied using XPS analysis in the sludge obtained. For the purpose of the reuse, FTIR, AAS, and ICP-OES analysis were done and compared with the aqueous dye 3G, after EC and hybrid process to ensure the maximum removal of the degraded dye components and metal. ICP-OES results showed that there were no traces of metal in the treated aqueous dye 3G using this method. Throughout the study, the experimental outcomes indicated that the hybrid process upgraded the quality of the treated aqueous dye 3G.

An innovative outlook on utilization of agro waste in fabrication of functional nanoparticles for industrial and biological applications: A review

The burning of an agro waste residue causes air pollution, global warming and lethal effects. To overcome these obstacles, the transformation of agro waste into nanoparticles (NPs) reduces industrial expenses and amplifies environmental sustainability. The concept of green nanotechnology is considered as a versatile tool for the development of valuable products. Although a plethora of literature on the NPs is available, but, still scientists are exploring to design more novel particles possessing unique shape and properties. So, this review basically summarises about the synthesis, characterizations, advantages and outcomes of the various agro waste derived NPs.

Utilization of discarded face masks in combination with recycled concrete aggregate and silica fume for sustainable civil construction projects

The coronavirus (COVID-19) pandemic has not only had a severe impact on global health but also poses a threat to the environment. This research aims to explore an innovative approach to address the issue of increased waste generated by the pandemic. Specifically, the study investigates the utilization of discarded face masks in combination with recycled concrete aggregate (RCA) and Silica Fume (SFM) in civil construction projects. The disposable face masks were processed by removing the ear loops and nose strips, and then cutting them into small fibers measuring 20 mm in length, 5 mm in width, and 0.46 mm in thickness, resulting in an aspect ratio of 24. Various proportions of SFM and RCA were incorporated into the concrete mix, with a focus on evaluating the compressive strength, split tensile strength, and durability of the resulting material. The findings indicate that the addition of SFM led to improvements in both compressive and split tensile strength, while no significant impact on durability was observed.

Co-treatment of steel slag and oil shale waste in cemented paste backfill: Evaluation of fresh properties, microstructure, and heavy metals immobilization

The environmentally sustainable treatment of steel slag (SS) and oil shale waste (OSW) is a significant concern in the field of industrial development. The mining industry also faces challenges related to the high costs and carbon emissions associated with ordinary Portland cement (OPC), leading to environmental pollution. To address these challenges, this study aimed to develop a cost-effective and environmentally friendly binder for cemented paste backfill (CPB) by utilizing SS and calcined oil shale waste (COSW) as primary precursors. Extensive investigations were conducted to evaluate the properties of the CPB sample with varying COSW content, including rheological properties, mechanical strength, and microstructure. The binder sample was comprehensively characterized using isothermal calorimetric analysis, X-ray diffraction (XRD), thermogravimetry (TG), and scanning electron microscopy (SEM). Based on systematic experimentation, an optimal blend ratio for the binder was determined, consisting of 60 wt% SS, 15 wt% COSW, 15 wt% phosphogypsum (PG), and 10 wt% OPC. The exceptional performance of the binder was attributed to the substantial formation of precipitated ettringite (AFt), resulting in a more compact structure and improved mechanical strength. Additionally, a sequential extraction test revealed that the heavy metals in the CPB sample were mainly present in the residual fraction, demonstrating the effective immobilization of heavy metals by the binder.

Integrated bipolar electrocoagulation and PVC-based ultrafiltration membrane process for palm oil mill effluent (POME) treatment

In this study, the effectiveness of integrating electrocoagulation (EC) and ultrafiltration (UF) membranes for palm oil mill effluent (POME) wastewater treatment was investigated. The impact of various parameters on contaminant removal efficiency, including electrode configuration (monopolar and bipolar), number of anodes, agitation rate, and current density, was studied. The findings demonstrated that using bipolar (BP) electrodes in the EC reactor improved coagulation efficiency. However, an increase in agitation rate led to a decrease in removal efficiency. The electrode configuration of 2A-2C-2B achieved high contaminant removal with a lower electrode consumption compared to the 4A-2C and 4A-2C-2B configurations. The removal efficiencies for total dissolved solids (TDS), total suspended solids (TSS), chemical oxygen demand (COD), and biological oxygen demand (BOD) were 59.1%, 99.9%, 96.8%, and 96%, respectively. The operating cost for the electrode configuration of 2A-2C-2B was estimated to be 2.71 US$ m-3 at an effluent capacity of 50 m3 d-1 and 20 h d-1 of operating time, while the energy requirement was 6.20 kWh m-3. An increase in operating time from 5 to 24 h d-1 raised the specific operating cost from 2.17 to 2.85 US$ m-3. This study provides valuable insights into optimizing EC and UF processes for POME wastewater treatment, which could have significant implications for sustainable industrial practices.

Characterisation of synthesised trimetallic nanoparticles and its influence on anaerobic digestion of palm oil mill effluent

The augmentation of biogas production can be achieved by incorporating metallic nanoparticles as additives within anaerobic digestion. The objective of this current study is to examine the synthesis of Fe-Ni-Zn and Fe-Co-Zn trimetallic nanoparticles using the co-precipitation technique and assess its impact on anaerobic digestion using palm oil mill effluent (POME) as carbon source. The structural morphology and size of the synthesised trimetallic nanoparticles were analysed using a range of characterization techniques, such as X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and Energy-dispersive X-ray spectroscopy (EDX) . The average size of Fe-Ni-Zn and Fe-Co-Zn were 19-25.5 nm and 19.1-30.5 nm respectively. Further, investigation focused on examining the diverse concentrations of trimetallic nanoparticles, ranging from 0 to 50 mgL-1. The biogas production increased by 55.55% and 60.11% with Fe-Ni-Zn and Fe-Co-Zn trimetallic nanoparticles at 40 mgL-1 and 20 mgL-1, respectively. Moreover, the lowest biogas of 11.11% and 38.11% were found with 10 mgL-1 of Fe-Ni-Zn and Fe-Co-Zn trimetallic nanoparticles. The findings of this study indicated that the trimetallic nanoparticles exhibited interactions with anaerobes, thereby enhancing the degradation process of palm oil mill effluent (POME) and biogas production. The study underscores the potential efficacy of trimetallic nanoparticles as a viable supplement for the promotion of sustainable biogas generation.

Streptomyces spp. as biocatalyst sources in pulp and paper and textile industries: Biodegradation, bioconversion and valorization of waste

Complex polymers represent a challenge for remediating environmental pollution and an opportunity for microbial-catalysed conversion to generate valorized chemicals. Members of the genus Streptomyces are of interest because of their potential use in biotechnological applications. Their versatility makes them excellent sources of biocatalysts for environmentally responsible bioconversion, as they have a broad substrate range and are active over a wide range of pH and temperature. Most Streptomyces studies have focused on the isolation of strains, recombinant work and enzyme characterization for evaluating their potential for biotechnological application. This review discusses reports of Streptomyces-based technologies for use in the textile and pulp-milling industry and describes the challenges and recent advances aimed at achieving better biodegradation methods featuring these microbial catalysts. The principal points to be discussed are (1) Streptomyces' enzymes for use in dye decolorization and lignocellulosic biodegradation, (2) biotechnological processes for textile and pulp and paper waste treatment and (3) challenges and advances for textile and pulp and paper effluent treatment.

Performance of electro-Fenton process for the treatment of synthetic sulphidic spent caustic waste stream generated from petroleum refineries

Sulphidic spent caustic (SSC) is an alkaline waste stream which is generated during caustic scrubbing of liquefied petroleum gas and ethylene products. Due to presence of high concentrations of sulphides and phenols, the waste stream requires proper treatment before mixing with the low strength wastewater streams produced from other refinery operations. Electrochemical process is an emerging treatment method that can work efficiently at ambient conditions. The present study reports performance of electro-Fenton (EF) process for the treatment of synthetic SSC wastewater (sulphides = 10 g L-1, phenol = 2 g L-1 and pH = 12.9). The EF runs were carried out for 2 h duration in a reactor equipped with iron electrodes. The effects of H2O2 dose (0.26-1.3 M), current density (1-20 mA cm-2), pH (4.5-12.9) and stirring speed (100-1000 rpm) were investigated on removal of pollutants. The H2O2 was rapidly consumed in initial 30 min during which the significant fraction of the pollutants was degraded or removed. The optimum conditions for EF process were found to be as follows: pH = 4.5, H2O2 dose = 1.05 M, current density = 5 mA cm-2 and stirring speed = 500 rpm. At these conditions, the maximum sulphide and phenol removals from the wastewater were 98% and 91%, respectively. The results will be helpful to the wastewater treatment plant operators worldwide dealing with high concentrations of such pollutants.

A review on existing and emerging approaches for textile wastewater treatments: challenges and future perspectives

This comprehensive review explores the complex environment of textile wastewater treatment technologies, highlighting both well-established and emerging techniques. Textile wastewater poses a significant environmental challenge, containing diverse contaminants and chemicals. The review presents a detailed examination of conventional treatments such as coagulation, flocculation, and biological processes, highlighting their effectiveness and limitations. In textile industry, various textile operations such as sizing, de-sizing, dyeing, bleaching, and mercerization consume large quantities of water generating effluent high in color, chemical oxygen demand, and solids. The dyes, mordants, and variety of other chemicals used in textile processing lead to effluent variable in characteristics. Furthermore, it explores innovative and emerging techniques, including advanced oxidation processes, membrane filtration, and nanotechnology-based solutions. Future perspectives in textile wastewater treatment are discussed in-depth, emphasizing the importance of interdisciplinary research, technological advancements, and the integration of circular economy principles. Numerous dyes used in the textile industry have been shown to have mutagenic, cytotoxic, and ecotoxic potential in studies. Therefore, it is necessary to assess the methods used to remediate textile waste water. Major topics including the chemical composition of textile waste water, the chemistry of the dye molecules, the selection of a treatment technique, the benefits and drawbacks of the various treatment options, and the cost of operation are also addressed. Overall, this review offers a valuable resource for researchers and industry professionals working in the textile industry, pointing towards a more sustainable and environmentally responsible future.

Characterizing and optimizing adsorption for olive mill wastewater processing in Loukkos, Morocco

The present research consists of studying the characterization and treatment of the olive mill wastewater (OMWW) resulting from the olive industries of the region of Loukkos, Morocco. According to the national plan for green Morocco, the annual volumes of OMWW discharges increase with the expansion of the areas of olive plantations compared to agricultural activities. The study of the organic, mineral, and microbiological composition of the obtained OMWW showed that they are rich in microbiological (FMAT, Let M., and B.L.), mineral (total Kjeldhal nitrogen, orthophosphate, total phosphorus, sodium, potassium, calcium, copper, iron, zinc, manganese, and lead ions), and organic (COD, BOD5, and polyphenols) micropollutants with very high percentages that are higher than the standards in force. The treatment used in this study is the combined process of aerated lagooning/adsorption using powdered activated carbon after optimization of the experimental parameters (mass concentration of activated carbon (AC) and agitation rapidity (Ar)) by experiment design method. The obtained physicochemical parameters, such as pH, total suspended solids (TSS), chemical oxygen demand (COD), rate of discoloration, and polyphenol content of raw OMWW, were 4.87, 0.63, 80.3, 0.8, and 1.45 g/l, respectively. The results of these parameters for the treated OMWW were obtained in the order of 6.10, 0.22, 28, 0.28, and 0.44 g/l for pH, TSS, COD, discoloration rate, and polyphenol content, respectively. These results show that the proposed treatment significantly reduced acidity, TSS, COD, discoloration rate, and polyphenol contents, with a performance of about 25.26, 65, 65.13, 65, and 69.65%, respectively. This indicates that there is significant performance in the processing of exploited OMWW.

Innovative production of value-added products using agro-industrial wastes via solid-state fermentation

The prevalence of organic solid waste worldwide has turned into a problem that requires comprehensive treatment on all fronts. The amount of agricultural waste generated by agro-based industries has more than triplet. It not only pollutes the environment but also wastes a lot of beneficial biomass resources. These wastes may be utilized as a different option/source for the manufacturing of many goods, including biogas, biofertilizers, biofuel, mushrooms and tempeh as the primary ingredients in numerous industries. Utilizing agro-industrial wastes as good raw materials may provide cost reduction and lower environmental pollution levels. Agro-industrial wastes are converted into biofuels, enzymes, vitamin supplements, antioxidants, livestock feed, antibiotics, biofertilizers and other compounds via solid-state fermentation (SSF). By definition, SSF is a method used when there is little to no free water available. As a result, it permits the use of solid materials as biotransformation substrates. Through SSF methods, a variety of microorganisms are employed to produce these worthwhile things. SSFs are therefore reviewed and discussed along with their impact on the production of value-added items. This review will provide thorough essential details information on recycling and the use of agricultural waste.

Material and monetary flows of construction and demolition waste and assessment on physical and environmental properties of illegally dumped construction and demolition waste in Hanoi

The main aim of this study is to investigate the material and monetary flows of CDW management and to characterize the distribution of illegally dumped CDW in Hanoi. Construction and demolition waste management has become a source of much concern to the urban authorities and citizens of big cities in Vietnam. It is estimated that 3000 t of CDW were generated per day from construction and demolition activities in Hanoi, but only 45% of the CDW was received at official landfills, while 55% of the CDW was disposed of elsewhere. The consequences of improper waste management are potentially alarming. The study conducted interviews to identify the material and cash flow associated with licensed and unlicensed contractors in CDW classification, transportation, treatment, and disposal, to characterize the distribution of illegally dumped CDW in two districts in Hanoi (urban and suburban districts), and to assess the composition of dumped CDW and environmental assessment of illegally dumped CDW by chemical analyses such as leaching and content tests. The study concluded that illegal dumping was performed mostly by unlicensed private companies. The illegally dumped CDW was mostly composed of mixed materials such as concrete, bricks, stones, and some hazardous materials such as asbestos and gypsum were found. The environmental concern of illegally dumped CDW was mostly dust, blockage of water ways, and inundation of increased suspended solids, whereas the heavy metal leaching concentration of all samples was below the environmental standards in Vietnam.

Automatic identification of illegal construction and demolition waste landfills: A computer vision approach

Dozens of landslide accidents are reported at construction and demolition waste (CDW) landfills worldwide every year. Those accidents could be avoided via timely inspection in which the identification of illegal CDW landfills at a large scale plays a critical role. Traditional field surveys are time-consuming, labor-intensive, which is not effective in large-scale detection of landfills. To address this issue, a methodology is proposed in this study for the automatic identification of CDW landfills in large-scale areas by utilizing semantic segmentation of remote sensing imagery. Deep learning is employed to achieve automatic identification and a case study is conducted to showcase the models. The results shown that: (1) The model proposed in this study can effectively identify CDW landfills, with an accuracy of 96.30 % and an IoU of 74.60 %. (2) DeepLabV3+ demonstrated superior performance over Pspnet and HRNet, though HRNet approached DeepLabV3+ in performance with appropriate optimizations. (3) Case study results indicate the potential existence of 52 CDW landfills in Shenzhen, includng 4 official landfills and 48 suspected illegal CDW landfills, mainly in Longhua, Guangming, and Baoan districts. The method proposed in this study provides an effective approache to identify large-scale illegal CDW landfills and has great significance for supervising CDW landfills.

Advancements and sustainable strategies for the treatment and management of wastewaters from metallurgical industries: an overview

Metallurgy is pivotal for societal progress, yet it yields wastewater laden with hazardous compounds. Adhering to stringent environmental mandates, the scientific and industrial sectors are actively researching resilient treatment and disposal solutions for metallurgical effluents. The primary origins of organic pollutants within the metallurgical sector include processes such as coke quenching, steel rolling, solvent extraction, and electroplating. This article provides a detailed analysis of strategies for treating steel industry waste in wastewater treatment. Recent advancements in membrane technologies, adsorption, and various other processes for removing hazardous pollutants from steel industrial wastewater are comprehensively reviewed. The literature review reveals that advanced oxidation processes (AOPs) demonstrate superior effectiveness in eliminating persistent contaminants. However, the major challenges to their industrial-scale implementation are their cost and scalability. Additionally, it was discovered that employing a series of biological reactors instead of single-step biological processes enhances command over microbial communities and operating variables, thus boosting the efficacy of the treatment mechanism (e.g., achieving a chemical oxygen demand (COD) elimination rate of over 90%). This review seeks to conduct an in-depth examination of the current state of treating metallurgical wastewater, with a particular emphasis on strategies for pollutant removal. These pollutants exhibit distinct features influenced by the technologies and workflows unique to their respective processes, including factors such as their composition, physicochemical properties, and concentrations. Therefore, it is of utmost importance for customized treatment and disposal approaches, which are the central focus of this review. In this context, we will explore these methods, highlighting their advantages and characteristics.

Insight into the impact of industrial waste co-disposal with MSW on groundwater contamination at the open solid waste dumping sites

Due to the lack of normalized management, industrial waste is often co-disposed at open solid waste dumping sites, which could aggravate the groundwater pollution. In this study, 5 practical open solid waste dumping sites dealing with municipal solid wastes (MSW) (2 of 5) and industrial wastes mixed with MSW (3 of 5) were chosen to investigate the effect of waste co-disposal on the groundwater contamination. The industrial waste was mainly from rubber production, leather production, machinery industry, pharmaceutical industry and plastic production. 3 to 6 groundwater wells were excavated from each dumping site and 148 indices were analyzed, including regular chemicals, heavy metals, biological pollutants, volatile organic compounds (VOCs), semi-volatile organic compounds (SVOCs) and pesticide residues. Nemerow index analysis showed that 5 indices were severely polluted in the groundwater from every industrial waste co-disposal landfill, while only 0 and 1 severely polluted index was found for the two MSW landfill, respectively. The principal component analysis (PCA) analysis indicated that 2 biological pollutant (plate-counting bacteria (TPB) and total coliforms (TCs)), 4 chemical pollutants (permanganate index, ammonia, S2- and petroleum) were closely connected with the disposal of industrial waste. Besides, co-disposal of industrial waste also brought in series of PAHs and dichloromethane, with di(2-ethylhexyl)phthalate exceeding the standard limit (10.5 mg L-1). Attention should be paid to TPB and TCs, whose maximal concentrations exceeded the standard limit by extraordinary 3200 and 1600 times, respectively. The distribution pattern of the pollutants showed that the biological pollutants at the downstream area, and chemical pollutants at the leakage points exhibited the highest concentration, which indicated the downstream area and seepage points should be specially concerned for the industry waste co-disposed dumping sites.

Alternative treatment of olive mill wastewater by combined sulfate radical-based advanced electrocoagulation processes

The aim of this study is to investigate the performance of advanced electrocoagulation (EC) process for the treatment of olive mill wastewater. In EC process, iron plates were used as electrodes, and peroxydisulfate (PS) and peroxymonosulfate (PMS) were added as oxidants. The effects of the initial pH value, current density, oxidant dose, and electrolysis time were optimized for pollutant removal from olive mill wastewater by EC-PS and EC-PMS processes. Control experiments showed that addition of oxidants to the conventional EC process increased the pollutant removal efficiency. Classical optimization method was used to determine optimum conditions, which were initial pH 4, current density 40 mA/cm2 , oxidant dose 5 g/L, and electrolysis time 30 min for both processes. Under these conditions, EC-PS and EC-PMS processes achieved 50.5% and 48.9% chemical oxygen demand (COD), 93.8% and 89.3% total phenol, 87.7% and 83% UV254 , and 74.5% and 64.1% total suspended solid removal efficiencies. Quenching experiments were performed to determine the dominant radical species participating in the processes. It was observed that hydroxyl and sulfate radicals were involved in both processes but hydroxyl radicals were more active. Specific energy consumption was calculated as 5.90 kWh/kg COD for EC process, 4.95 kWh/kg COD for EC-PS process, and 5.20 kWh/kg COD for EC-PMS process. The organic removal/sludge ratio of EC-PS process was found to be higher with 17.5 g/L value. Although the application of EC-PS and EC-PMS processes alone is insufficient to meet the discharge limits, they have been found to be effective in olive mill wastewater treatment. PRACTITIONER POINTS: Peroxydisulfate (PS) and peroxymonosulfate (PMS)-based advanced electrocoagulation (EC) was used in olive mill wastewater treatment. 50.5% chemical oxygen demand (COD), 93.8% TP, 87.7% UV254 , and 74.5% TSS removals were achieved by EC-PS. 48.9% COD, 89.3% TP, 83% UV254 , and 64.1% TSS removals were obtained by EC-PMS. Hydroxyl and sulfate radicals were involved in both processes.

A comparative life cycle assessment on recycled concrete aggregates modified by accelerated carbonation treatment and traditional methods

Recycling of construction and demolition wastes contributes to achieve carbon summit and carbon neutrality early in the construction industry. Accelerated carbonation is a promising new technology for enhancing the properties of recycled concrete aggregates (RCAs) as well as mitigating global warming. This study performed a comparative life cycle assessment on RCAs modified by accelerated carbonation treatment and traditional methods. The effect of different treatment methods on environmental impacts of concrete was evaluated. The key contributors of environmental impacts for concrete incorporating carbonated RCAs were identified. Moreover, a sensitivity analysis on the transport distance of concrete incorporating carbonated RCAs was conducted. Results demonstrated that incorporating carbonated RCAs could significantly reduce the energy demand, environmental impacts and environmental cost compared with natural aggregate concrete. Accelerated carbonation treatment exhibited greater potential than the normal two-stage crushing and heating treatment in mitigating environmental burden, especially for the global warming potential. Cement production and transportation were the primary contributors to environmental impacts of concrete incorporating carbonated RCAs. Sensitivity analysis indicated incorporating carbonated RCAs as alternatives of natural aggregates contributes to lower the environmental impacts of concrete when the natural aggregates are far from urban areas while the recycling center is near the city.

Interpretation and Prediction of the CO2 Sequestration of Steel Slag by Machine Learning

The utilization of steel slag for CO2 sequestration is an effective way to reduce carbon emissions. The reactivity of steel slag in CO2 sequestration depends mainly on material and process parameters. However, there are many puzzles in regard to practical applications due to the different evaluations of process parameters and the lack of investigation of material parameters. In this study, 318 samples were collected to investigate the interactive influence of 12 factors on the carbonation reactivity of steel slag by machine learning with SHapley Additive exPlanations (SHAP). Multilayer perceptron (MLP), random forest, and support vector regression models were built to predict the slurry-phase CO2 sequestration of steel slag. The MLP model performed well in terms of prediction ability and generalization with comprehensive interpretability. The SHAP results showed that the impact of the process parameters was greater than that of the material parameters. Interestingly, the iron ore phase of steel slag was revealed to have a positive effect on steel slag carbonation by SHAP analysis. Combined with previous literature, the carbonation mechanism of steel slag was proposed. Quantitative analysis based on SHAP indicated that steel slag had good carbonation reactivity when the mass fractions of "CaO + MgO", "SiO2 + Al2O3", "Fe2O3", and "MnO" varied from 50-55%, 10-15%, 30-35%, and <5%, respectively.

Use of sludge from the vehicle industry and its encapsulation of toxic metals in ceramic products

Despite the various existing studies with wastes from wastewater treatment plants for the production of bricks, there is still a lack of further studies on the technological characterization and application only of hazardous industrial wastes from the treatment of wastewater from the metal-processing automotive industry in the stabilization/solidification with ceramic materials. Therefore, the objective of this work was to evaluate the use of waste from the treatment of wastewater from the metal processing automotive industry for the production of red ceramics by evaluating the mechanical behavior and the potential for encapsulation of contaminants. The waste was originally classified as Class I-Hazardous due to the presence of Se. A clay with a clayey-silty character was used to produce ceramic test specimens by pressing and calcining at 950 °C. In the production of these test specimens, the clay was replaced with 0%, 5%, and 10% waste, and the mechanical properties of linear shrinkage, apparent porosity, water absorption, and three-point flexural strength of the test specimens, as well as the mineralogical, chemical, and microstructural composition such as the leaching of contaminants and potential encapsulation of all test specimens were evaluated. The results showed that after incorporation into the red ceramic, the wastes led to a reduction in flexural strength associated with greater water absorption and porosity, the higher the incorporated percentage. Changes in mineralogy and chemical composition were observed but did not affect microstructure and mechanical properties. The samples did not show metal leaching above national and international standards for toxicity and limits for groundwater and human consumption. It can be concluded that the use of up to 5% of the waste as a replacement for clay meets the requirements for good mechanical performance and encapsulation of the metals originally present in the waste.

Synthesis and crosslinking of collagen using 4-3,4,5-tris(oxiran-2-ylmethoxy)benzamido)benzenesulfonic acid for the development of robust metal-free leather

The leather manufacturing sector is actively pursuing organic alternatives to replace the utilization of inorganic tanning chemicals such as chromium, zirconium, and aluminum due to concerns over their environmental impact. Although glutaraldehyde has been considered a feasible alternative, it still falls short in providing the leather with greater tensile properties and is also considered to be toxic. In this study, we report the synthesis of a sulfonated gallic acid-based epoxide (GSE) and evaluate its performance as a metal-free tanning compound. The synthesized compound was subjected to comprehensive characterization using FTIR (functional group), ESI-MS (molecular weight), and NMR (chemical environment) spectroscopy. Furthermore, the leather treated with GSE demonstrated organoleptic and physical properties that were comparable to those achieved with glutaraldehyde tanning systems. SEM analysis of the GSE-tanned leather exhibited a homogeneous distribution pattern, confirming the stability of the collagen. In addition, the hydrothermal stability temperature of leather crosslinked with epoxide was found to be 83 ± 2 °C. The wastewater generated from the GSE tanning process exhibited a BOD to COD ratio of 0.35 ± 0.04, indicating its high treatability. The results showed that the GSE tanning system provided better tanning efficiency and improved crosslinking and thermal stability without the use of metal salts. Furthermore, the use of GSE as a tanning agent offers several advantages, such as easy availability, biodegradability, and low toxicity, making it a sustainable and environment-friendly option for the leather industry.

Sustainable use of wastes as reactive material in permeable reactive barrier for remediation of acid mine drainage: Batch and continuous studies

The aim of this work was to evaluate the feasibility of the use of different industrial and agricultural wastes as reactive materials in Permeable Reactive Barriers (PRB) for Acid Mine Drainage (AMD) remediation. Sugar foam (SF), paper mill sludge (PMS), drinking water sludge (DWS) and olive mill waste (OMW) were evaluated in terms of pH neutralization and metal removal from AMD. Laboratory batch tests and continuous pilot scale up-flow columns containing 82% of Volcanic Slag (VS), as porous fill material, and 18% w/w of one of the industrial and agricultural wastes previously indicated, were tested. From the batch tests it was observed that the reactive material presenting the best results were the SF and the PMS. The results obtained in all the PRB were accurately described by a pseudo-first order model, presenting coefficient of determination higher than 0.96 in all the cases. During the continuous operation of the PRB, the porosity and hydraulic retention time (HRT) of most of the up-flow columns strongly decreased due to chemical precipitation and biofilm growth. The SF presented a significant number of fine particles that were washed out by the liquid flow, generating an effluent with very high total suspended solid concentration. Despite SF was the material with the highest alkalinity potential, the reduction of the HRT limited its neutralization and metal removal capacity. PMS and DWS presented the best pollutant removal yields in the continuous operation of the PRB, ranging from 55 to 99% and 55-95% (except in the case of the Mn), respectively. These results allowed the metal removal from the AMD. Additionally, these wastes presented very good biological sulphate reduction. Based on these results, the use of PMS and DWS as reactive material in PRB would allow to simultaneously valorise the industrial waste, which is very interesting within the circular economy framework, and to remove metals from the AMD by means of a low-cost and environmentally sustainable procedure.

Acute toxicity of palm oil mill effluent on zebrafish (Danio rerio Hamilton-Buchanan, 1822): Growth performance, behavioral responses and histopathological lesions

Evaluating the toxicity of Palm Oil Mill Effluent (POME) is critical as part of the effort to develop waste management regulations for the palm oil industry. In this study, we investigated the acute toxicity of POME on growth performance, behavioral response, and histopathology of gill and liver tissues of zebrafish (Danio rerio). In total, 550 adult male zebrafish were used for the toxicity experiment including range finding test, acute toxicity test, growth performance and behaviour test. Static non-renewal acute toxicity bioassays were conducted by exposing fish to POME (1.584-9.968 mL/L) for 96 h. Growth performance, behavior response, and histopathological lesions in untreated and POME treated (96-h LC50: 5.156 mL/L) fish were measured at 24, 48, 72 and 96 h. Time-dependent significant decline in body length and body weight of POME-exposed zebrafish was observed. Furthermore, several behavioral changes were recorded, including hyperactivity, loss of balance, excessive mucus secretion, and depigmentation. Decreasing operculum movement and oxygen consumption rate as well as alterations in gill tissues (i.e. hyperplasia, hypertrophy, hemorrhage, and necrosis) of POME-exposed zebrafish were observed, suggesting a dysfunction in respiratory performance. On the other hand, liver tissue alterations (congestion, hemorrhage, hyperplasia, shrinkage of hepatocytes, hydrophilic degeneration, and necrosis) indicated a disruption in detoxification performance. We conclude that exposure to POME at acute concentration caused histopathological lesions both in gill and liver tissue along with changes in fish behaviors which disrupted respiratory and detoxification performance, resulting in mortality and reduced growth of zebrafish. These findings might provide valuable information for guiding POME management and regulation.

The influence of geo-environmental properties on the plastic and in-service properties of flowable fills: a comprehensive state-of-the-art review

There is a recognized need to address the mismanagement of industrial by-products, as their accumulation severely threatens the environment. Efficient reutilizing of industrial waste is indispensable in realizing environment-friendly sustainable development. Towards this end, supervised adoption of controlled low-strength materials (CLSM) can be a solution. CLSM are cement-based materials which are environmentally safe, with self-levelling and self-consolidating properties. CLSM's long-term sustainable applications exclusively depend on its geo-environmental properties during and after the construction phase. This comprehensive review explores the impact of geo-environmental properties on the plastic and in-service properties of industrial by-products used for CLSM creation. It critically examines various geo-environmental properties of CLSM comprising interlaced aspects of chemical composition, mineralogical composition, leaching behavior, pH value, and thermal conductivity. It is shown that the geo-environmental properties of CLSM are determined mainly by the characteristics and content of raw materials, wastes, and the quantity of water used in the final blend. Further, the review accentuates the geo-environmental properties' detrimental effects on the plastic and in-service properties of CLSM. The comprehensive review can aid in effectively utilizing CLSM to reduce environmental concerns while achieving sustainable development.

Application of common industrial solid waste in water treatment: a review

Industrial solid waste has a wide range of impacts, and it is directly or indirectly related to land, atmosphere, water, and other resources. Industrial solid waste has a large amount of production, complex and diverse components and contains a variety of harmful substances. However, as industrial by-products, it also has a lot of available value. Industrial solid waste has been continuously studied in water treatment due to its special composition and porous and loose structure. It is known that there are few reviews of various industrial solid wastes in the field of wastewater treatment, and most of them only discuss single industrial solid waste. This paper aims to sort out the different studies on various solid wastes such as fly ash, red mud, wastewater sludge, blast furnace slag and steel slag in dyeing, heavy metal, and phosphorus-containing wastewater. Based on the modification of industrial solid waste and the preparation of composite materials, adsorbents, coagulants, catalysts, filtration membranes, geological polymers, and other materials with high adsorption properties for pollutants in wastewater were formed; the prospect and development of these materials in the field of wastewater were discussed, which provides some ideas for the mutual balance of environment and society. Meanwhile, some limitations of solid waste applications for wastewater treatment have been put forward, such as a lack of further researches about environment-friendly modification methods, application costs, the heavy metal leaching, and toxicity assessment of industrial solid waste.

Troubleshooting dioxins stack emissions in an industrial waste gas incinerator

An important source of dioxins and furans at present is waste incineration, utmost formed during combustion processes and emitted to the environment without being fully captured by waste-gas treatment equipment. In this study, monitoring campaign of International Toxic Equivalents for dioxins and furans (I-TEQDF), was carried out at pharmaceutical industrial waste incinerator to find a correlation between combustion parameters and feed composition with potential emission. Principal Component Analysis (PCA) shows that high values of dioxin emission correlate with short residence time of the flue gas in the furnace as well as low oxygen concentration. These operating conditions were further investigated, using COMSOL Computational Fluid Dynamics (CFD) simulation to calculate the temperature profiles along the furnace. The results suggest that the flame temperature profile is anticipated to exhibit cold areas (cold spots), which may be used as a proxy for dioxin formation due to incomplete combustion. Additionally, the calculated congeners furan to dioxin concentration ratio, points to their formation via de novo mechanism. SEM-EDS analysis preformed on the bag filter upstream the feed following its filtration, have shown large amount of iron, which may have served as a metal catalytic source for dioxin formation. The iron origin is most likely from corrosion of the feeding pipe, drifted with the waste gas and trapped on the bag filter. The results of this study provide a better understanding of the parameters controlling dioxin formation and emission from the plant and may assist a planning of process optimization in such a plant.

Characterization of Heavy Metal Fractions in the Soil Developed on Volcanic Rocks of Karadağ Mountain, Turkey by Sequential Extraction

In this work, soil samples were taken from 15 different sites and the contents of Cd, Cr, Cu, Ni, Pb, and Zn in the mobile and residual fractions of the soils formed from the volcanic materials were determined by the sequential extraction procedure. The mobility of each metal was revealed by analysing fractions. The order of heavy metals in each fraction of Karadağ samples was:Cd: Acid and Water Soluble > Reducible > Oxidizable > Residual; Cr: Residual > Oxidizable > Reducible > Acid and Water Soluble; Cu: Residual > Oxidizable > Reducible > Acid and Water Soluble; Ni: Residual > Reducible > Oxidizable > Acid and Water Soluble; Pb: Reducible > Residual > Oxidizable > Acid and Water Soluble; Zn: Residual > Reducible > Oxidizable > Acid and Water Soluble.According to the results, while the concentrations of Cd and Pb in the mobile fraction were higher than those in the residual fraction, Cr, Cu, Ni and Zn were higher in the immobile fraction. When the higher mobility levels of Cd and Pb are evaluated in terms of environmental pollution and toxicity in soil, these metals have been found to have a higher potential risk than other metals.Cd and Pb are likely to be in close contact with plant roots and thus could potentially affect soil fertility. To avoid threats to productivity and food security in the long term, further trace metal inputs to soils in these areas should be avoided by agricultural management or other means.

Environmental implications of phosphate-based fertilizer industrial waste and its management practices

During the green revolution in the mid-twentieth century, the consumption of inorganic phosphorous and phosphate-based fertilizers (P-fertilizers) in the developing world skyrocketed, resulting in a proliferation of P-fertilizer industries. Phosphate-based fertilizer industries are ranked among the most environment-polluting industries. The worldwide phosphorus market, which was 68.5 million metric tons in 2020, is expected to increase at a compound annual growth rate (CAGR) of 2.5% to 81 million metric tons by 2027. The release of untreated hazardous pollutants from these fertilizer industries into the soil, water, and atmosphere has resulted in severe environmental health issues. Excessive surface runoff of phosphorus from agricultural fields and its deposition in water promote the growth of algae and macrophytes and lower dissolved oxygen concentration through eutrophication, which is detrimental to aquatic life. Fluorides (F-) and sulfur dioxide (SO2) and/or heavy metals (potentially toxic elements, PTEs) are also detected in the emissions from these fertilizer industries. The main solid waste generated from the phospho-gypsum plant produced up to 5 tons of di-hydrogen phosphate (H2PO4), including PTEs and radioactive substances. Phosphates and fluorenes from these industries are usually disposed of as sludge in storage ponds or trash piles. Humans inhaling poisonous gases released from the P-fertilizer industries can develop hepatic failure, autoimmune diseases, pulmonary disorders, and other health problems. The objectives of this review are to provide guidelines for eliminating the bottleneck pollutions that occur from the phosphate-based fertilizer industries and explore the management practices for its green development.

Pineapple wastewater as co-substrate in treating real alkaline, non-biodegradable textile wastewater using biogranulation technology

This study was to develop biogranules using a sequencing batch reactor (SBR) and to evaluate the effect of pineapple wastewater (PW) as a co-substrate for treating real textile wastewater (RTW). The biogranular system cycle was 24 h (2 stages of phase), with an anaerobic phase (17.8 h) followed by an aerobic phase (5.8 h) for every stage of the phase. The concentration of pineapple wastewater was the main factor studied in influencing COD and color removal efficiency. Pineapple wastewater with different concentrations (7, 5, 4, 3, and 0% v/v) makes a total volume of 3 L and causes the OLRs to vary from 2.90 to 0.23 kg COD/m3day. The system achieved 55% of average color removal and 88% of average COD removal at 7%v/v PW concentration during treatment. With the addition of PW, the removal increased significantly. The experiment on the treatment of RTW without any added nutrients proved the importance of co-substrate in dye degradation.

Geochemical fractionation, bioaccessibility and ecological risk of metallic elements in the weathering profiles of typical skarn-type copper tailings from Tongling, China

Nonferrous metal tailings have long posed a significant threat to the surrounding environment and population. Previous studies have primarily focused on heavy metal pollution in the vicinity of sulfide tailings, while little attention was given to metal mobility and bioavailability within skarn-type tailings profile during weathering. Therefore, this study aimed to investigate the fractionation, bioaccessibility, and ecological risk associated with metallic elements (MEs, including Pb, Cd, Cr, Zn, and Cu) in two representative weathering copper-tailings profiles of Tongling mine (China). This was achieved through the use of mineralogical analyses, BCR extractions (F1: exchangeable, F2: reducible, F3: oxidizable, F4: residual fraction), in-vitro gastrointestinal simulation test (PBET) and risk assessment models. The mineral compositions of two weathering profiles were similar, with quartz and calcite being the dominant minerals, along with minor amounts of siderite, hematite and spangolite. The mean concentration in the tailings profile was approximately 0.31 (Cr), 1.8 (Pb), 12 (Zn), 33 (Cd) or 34 (Cu) times of the local background values (LBVs). The mean content of the bottom weakly-weathering layer in profile was about 0.36 (Cr), 0.91 (Pb), 1.91 (Cd), 2.73 (Zn) or 2.68 (Cu) times of the surface oxide layer, indicating a strong weathering-leaching effect. The average proportion of BCR-F1 fraction for Cd (30.94 %) was the highest among the five MEs, possibly due to its association with calcite. The PBET-extracted fractions for Cd, Zn and Cu were significantly positively correlated with the F1, F2 and F3 fractions of BCR, suggesting that these elements have higher bioavailability/bioaccessibility. The assessment results indicated that Cd posed a higher health risk, while the risk of Cu, Zn, and Pb is relatively low and Cr is safe. In conclusion, this study provides valuable insights into the environmental geochemical behavior and potential risks of MEs in skarn-type non-ferrous metal tailings ponds.

Insights into bacterial community metatranscriptome and metabolome in river water influenced by palm oil mill effluent final discharge

AIMS

This study aimed to investigate the effect of palm oil mill effluent (POME) final discharge on the active bacterial composition, gene expression, and metabolite profiles in the receiving rivers to establish a foundation for identifying potential biomarkers for monitoring POME pollution in rivers.

METHODS AND RESULTS

The POME final discharge, upstream (unpolluted by POME), and downstream (effluent receiving point) parts of the rivers from two sites were physicochemically characterized. The taxonomic and gene profiles were then evaluated using de novo metatranscriptomics, while the metabolites were detected using qualitative metabolomics. A similar bacterial community structure in the POME final discharge samples from both sites was recorded, but their composition varied. Redundancy analysis showed that several families, particularly Comamonadaceae and Burkholderiaceae [Pr(>F) = 0.028], were positively correlated with biochemical oxygen demand (BOD5) and chemical oxygen demand (COD). The results also showed significant enrichment of genes regulating various metabolisms in the POME-receiving rivers, with methane, carbon fixation pathway, and amino acids among the predominant metabolisms identified (FDR < 0.05, PostFC > 4, and PPDE > 0.95). This was further validated through qualitative metabolomics, whereby amino acids were detected as the predominant metabolites.

CONCLUSIONS

The results suggest that genes regulating amino acid metabolism have significant potential for developing effective biomonitoring and bioremediation strategies in river water influenced by POME final discharge, fostering a sustainable palm oil industry.

Life cycle assessment of sequential microbial-based anaerobic-aerobic reactor technology developed onsite for treating textile effluent

Although biological treatment of textile effluent is a preferred option for industries avoiding toxic chemical sludge production and disposal, requirement of several extra pre-treatment units like neutralization, cooling systems or additives, results in higher operational cost. In the present study, a pilot scale sequential microbial-based anaerobic-aerobic reactor technology (SMAART) was developed and operated for the treatment of real textile effluent in the industrial premises in continuous mode for 180 d. The results showed an average ∼95% decolourization along with ∼92% reduction in the chemical oxygen demand establishing the resilience against fluctuations in the inlet parameters and climate conditions. Moreover, the pH of treated effluent was also reduced from alkaline range (∼11.05) to neutral range (∼7.76) along with turbidity reduction from ∼44.16 NTU to ∼0.14 NTU. A comparative life cycle assessment (LCA) of SMAART with the conventional activated sludge process (ASP) showed that ASP caused 41.5% more negative impacts on environment than SMAART. Besides, ASP had 46.15% more negative impact on human health, followed by 42.85% more negative impact on ecosystem quality as compared to SMAART. This was attributed to less electricity consumption, absence of pre-treatment units (cooling and neutralization) and less volume of sludge generation (∼50%) while using SMAART. Hence, integration of SMAART within the industrial effluent treatment plant is recommended to achieve a minimum waste discharge system in pursuit of sustainability.

Synchronous stabilization of Pb, Zn, Cd, and As in lead smelting slag by industrial solid waste

In order to prevent heavy metal (HM) pollution from lead smelting slag (LSS) to the surrounding environment, this work investigated the feasibility, influencing factors, and mechanisms of using industrial solid waste such as fly ash (FA), oil sludge pyrolysis residue (PR), and steel slag (SS) as remediation amendments. The results demonstrated that the stabilization process was influenced by the material dosage, water content, and LSS particle size. Compared to single materials, the combination amendment PR2FA1 (with a mass ratio of PR to FA as 2:1) exhibited the best stabilization effect, simultaneously reducing the leaching concentrations of As, Zn, Cd, and Pb in LSS to 0.032, 0.034, 0.002, and 0.014 mg/L, respectively. The pH value of the leachate remained between 8 and 9, which met the requirements of surface water quality class IV (GB3838-2002). Through morphological analysis, microscopic characterization, and simulated solution adsorption experiments, it was determined that the stabilization process of HMs was controlled by various mechanisms, including electrostatic attraction, physical adsorption, ion exchange, and chemical precipitation. PR2FA1 had more active components, and its fine-porous structure provided more active sites, resulting in good stabilization performance for As, Zn, Cd, and Pb. Furthermore, cost analysis showed that PR2FA1, as an environmentally friendly material, could generate profits of 157.2 ¥/ton. In conclusion, the prepared PR2FA1 not only addressed the HMs pollution from lead smelting slag to the surrounding environment but also achieved the safe and resourceful disposal of hazardous waste-oil sludge. Its excellent performance in stabilizing HMs and cost-effectiveness suggested promising commercial applications.

Olive mill wastewater treatment using natural adsorbents: phytotoxicity on durum wheat (Triticum turgidum L. var. durum) and white bean (Phaseolus vulgaris L.) seed germination

This research was undertaken to optimize the phenolic compound removal from Olive Mill Wastewater (OMW) by sawdust and red clay as natural adsorbents. Fractional factorial experimental design at 25-1 was used in order to optimize the experimental conditions for high removal efficiency. Statistics ANOVA analysis, Fisher's test, and Student's test suggested that the adsorbent dose has the most significant influence on polyphenol removal for both adsorbents. The maximum removal of polyphenols by sawdust reached 49.6% at 60 °C by using 60 g/L of adsorbent dose, pH 2, reaction time of 24 h, and agitation speed of 80 rpm. Whereas, for red clay, 48.08% of polyphenols removal was observed under the same conditions for sawdust except the temperature of 25 °C instead of 60 °C. In addition, the thermodynamic parameters suggested spontaneous process for both adsorbents, endothermic for the sawdust and exothermic for red clay. Furthermore, the phytotoxicity effect of OMW on durum wheat (Triticum turgidum L. var. durum) and white bean (Phaseolus vulgaris L.) seed germination was investigated. The obtained results showed that the untreated OMW inhibited the seed germination of T. turgidum and P. vulgaris seeds. OMW treatment with red clay followed by dilution (95% water) resulted in 87 and 30% germination of P. vulgaris and T. turgidum, respectively. While, the treatment of OMW with sawdust and dilution at 95% resulted in 51 and 26% germination of P. vulgaris and T. turgidum, respectively.

Electrochemical treatment of wastewater containing urea-formaldehyde and melamine-formaldehyde

The wastewater containing urea-formaldehyde (UF) and melamine-formaldehyde (MF) from the medium-density fiberboard (MDF) lamination factory disposed into the waterbodies adversely affects human health and aquatic life. Therefore, its treatment before discharge is necessary. Researchers have used various techniques to treat this type of wastewater in the past, but none have tried electrochemical (EC). However, EC can potentially remove pollutants such as chemical oxygen demand (COD), total organic carbon (TOC), formaldehyde (FA), total nitrogen (TN), nitrogen nitrate (NO3-N), and other hydrocarbons. Hence, this study uses the EC technique to treat wastewater containing UF and MF with aluminium electrodes. The experiments were run in batch mode with a 250 mL working volume in a 500 mL Pyrex glass beaker using a variable DC power supply (0-30 V and 0-5 A). The impacts of various parameters, including reaction time (RT) 30-240 min, current density (CD) 8.66-51.94 mA/cm2, inter-electrode distance (IED) 1-2 cm, and mixing speed in the range of 60-120 rpm were examined to achieve the best pollutant removals. The best removal percentage was reached at the optimized conditions of 150 min RT, 43.28 mA/cm2 CD, 1.5 cm IED, and 80 rpm: 81.1% TOC, 61.5% COD, 76.7% TN, 28.3% NO3-N, and 55.2% FA. During the EC process, electrodes and energy consumption were estimated at around 2.367 (g/L) and 0.18 (kWh/L), respectively. A kinetic analysis was also carried out to determine the pollutant's removal trend. This study concluded that the pseudo-first-order kinetic model was the best fit for removing TOC and FA with regression coefficients of 0.96 and 0.83, respectively.

Biodegradability enhancement of waste lubricating oil regeneration wastewater using electrocoagulation pretreatment

As a sustainable management of fossil fuel resources and ecological environment protection, recycling used lubricating oil has received widespread attention. However, large amounts of waste lubricating-oil regeneration wastewater (WLORW) are inevitably produced in the recycling process, and challenges are faced by traditional biological treatment of WLORW. Thus, this study investigated the effectiveness of electrocoagulation (EC) as pretreatment and its removal mechanism. The electrolysis parameters (current density, initial pH, and inter-electrode distance) were considered, and maximal 60.06% of oil removal was achieved at a current density of 15 mA/cm2, initial pH of 7, and an inter-electrode distance of 2 cm. The dispersed oil of WLORW was relatively easily removed, and most of the oil removal was contributed by emulsified oil within 5-10 μm. Gas chromatography-mass spectrometry (GC-MS) analysis revealed that effective removal of the biorefractory organic compounds could contribute to the improvement of biodegradability of WLORW. Thus, the 5-day biochemical oxygen demand/chemical oxygen demand ratio (BOD5/COD) was significantly enhanced by 4.31 times, which highly benefits future biological treatment. The routes of WLORW removal could be concluded as charge neutralization, adsorption bridging, sweep flocculation, and air flotation. The results demonstrate that EC has potential as an effective pretreatment technology for WLORW biological treatment.

Ecotoxicological response surface analysis of salt and pH in textile effluent on Bacillus subtilis and Lactuca sativa

Textile effluents, although their composition can vary considerably, typically contain high levels of dissolved salts and exhibit wide variations in pH. Ecotoxicological studies regarding the effects of these parameters, however, have been limited owing to the need for sensitive and easy-to-handle bioindicators that require low amounts of sampling, are cost-effective, time-efficient, and ethically endorsed. This kind of study, additionally, demands robust multi-factorial statistical designs that can accurately characterize the individual and combined relationship between variables. In this research, Response Surface Methodology (RSM) was used to calculate the individual and interaction effects of NaCl concentration and pH value of a Simulated Textile Effluent (STE) on the development rate (DR) of the bioindicators: Bacillus subtilis bacteria and Lactuca sativa lettuce. The results demonstrated that the bioindicators were sensitive to both NaCl and pH factors, where the relative sensitivity relationship was B. subtilis > L. sativa. The quadratic equations generated in the experiments indicated that increased concentrations of 50-250 mg L-1 of NaCl caused a perturbance of 1.40%-34.40% on the DR of B. subtilis and 0.50%-12.30% on L. sativa. The pH factor at values of 3-11 caused an alteration of 27.00%-64.78% on the DR of the B. subtilis and 51.37%-37.37% on the L. sativa. These findings suggest that the selected bioindicators could serve as effective tools to assess the ecotoxicological effects of textile effluents on different ecological systems, and the RSM was an excellent tool to consider the ecotoxicological effects of the parameters and to describe the behavior of the results. In conclusion, the NaCl and pH factors may be responsible for disrupting different ecosystems, causing imbalances in their biodiversity and biomass. Before discharge or reuse, it is suggested to remove salts and neutralize pH from textile effluents and, mostly, develop novel, eco-friendlier textile processing techniques.

Valorization of pistachio industrial waste: Simultaneous recovery of pectin and phenolics, and their application in low-phenylalanine cookies for phenylketonuria

This study introduces a sustainable approach to simultaneously produce pectin and phenolic compounds from pistachio industrial waste and applies them in the formulation of low-phenylalanine cookies. The co-optimization process was performed using the microwave-assisted technique and a Box-Behnken design, considering four variables and two responses: pectin yield and total phenolic content (TPC). The co-optimized condition (microwave power of 700 W, irradiation time of 210 s, pH level of 1.02, and LSR of 20 mL/g) resulted in a pectin yield of 15.85 % and a TPC of 10.12 %. The pectin obtained under co-optimized condition was evaluated for its physicochemical, structural, and thermal properties and the phenolic extract for its antiradical activity. Characterization of the pectin sample revealed a high degree of esterification (44.21 %) and a galacturonic acid-rich composition (69.55 %). The average molecular weight of the pectin was determined to be 640.236 kDa. FTIR and 1H NMR spectroscopies confirmed the structure of pectin, with an amorphous nature and high thermal stability observed through XRD and DSC analysis. Additionally, the extract exhibited significant antiradical activity comparable to butylated hydroxyanisole and ascorbic acid. The isolated ingredients were used to formulate low-protein, low-phenylalanine cookies for phenylketonuria patients. The addition of 0.5 % pectin and 1 mL/g extract led to increased moisture content (from 9.05 to 12.89 %) and specific volume (from 7.28 to 9.90 mL/g), decreased hardness (from 19.44 to 10.39 N × 102), and improved antioxidant properties (from 5.15 % to 44.60 % inhibition) of the cookies. Importantly, there was no significant increase observed in the phenylalanine content of the samples with pectin and extract addition. Furthermore, sensory evaluation scores demonstrated significantly higher scores for taste, odor, texture, and overall acceptability in cookies enriched with 0.5 % pectin and 1 mL/g extract, with scores of 4.53, 3.93, 4.40, and 4.60, respectively.

Z. AL-bonsrulah H. Optimization of oil industry wastewater treatment system and proposing empirical correlations for chemical oxygen demand removal using electrocoagulation and predicting the system's performance by artificial neural network

The alarming pace of environmental degradation necessitates the treatment of wastewater from the oil industry in order to ensure the long-term sustainability of human civilization. Electrocoagulation has emerged as a promising method for optimizing the removal of chemical oxygen demand (COD) from wastewater obtained from oil refineries. Therefore, in this study, electrocoagulation was experimentally investigated, and a single-factorial approach was employed to identify the optimal conditions, taking into account various parameters such as current density, pH, COD concentration, electrode surface area, and NaCl concentration. The experimental findings revealed that the most favorable conditions for COD removal were determined to be 24 mA/cm2 for current density, pH 8, a COD concentration of 500 mg/l, an electrode surface area of 25.26 cm2, and a NaCl concentration of 0.5 g/l. Correlation equations were proposed to describe the relationship between COD removal and the aforementioned parameters, and double-factorial models were examined to analyze the impact of COD removal over time. The most favorable outcomes were observed after a reaction time of 20 min. Furthermore, an artificial neural network model was developed based on the experimental data to predict COD removal from wastewater generated by the oil industry. The model exhibited a mean absolute error (MAE) of 1.12% and a coefficient of determination (R2) of 0.99, indicating its high accuracy. These findings suggest that machine learning-based models have the potential to effectively predict COD removal and may even serve as viable alternatives to traditional experimental and numerical techniques.

Treatment of diluted palm oil mill effluent (POME) synchronous with electricity production in a persulfate oxidant-promoted photocatalytic fuel cell

Attributable to the prosperous production growth of palm oil in Malaysia, the generated palm oil mill effluent (POME) poses a high threat owing to its highly polluted characteristic. Urged by the escalating concern of environmental conservation, POME pollution abatement and potential energy recovery from the effluent are flagged up as a research topic of interest. In this study, a cutting-edge photocatalytic fuel cell (PFC) system with employment of ZnO/Zn nanorod array (NRA) photoanode, CuO/Cu cathode, and persulfate (PS) oxidant was successfully designed to improve the treatment of POME and simultaneous energy production. The photoelectrodes were fabricated and characterized by field emission scanning electron microscopy with energy (FESEM), X-ray diffraction (XRD), energy-dispersive X-ray (EDX), and Brunauer, Emmett, and Teller analysis (BET). Owing to the properties of strong oxidant of PS, the proposed PFC/PS system has exhibited exceptional performance, attaining chemical oxygen demand (COD) removal efficiency of 96.2%, open circuit voltage (Voc) of 740.0 mV, short circuit current density (Jsc) of 146.7 μA cm-2, and power density (Pmax) of 35.6 μW cm-2. The pre-eminent PFC/PS system performance was yielded under optimal conditions of 2.5 mM of persulfate oxidant, POME dilution factor of 1:20, and natural solution pH of 8.51. Subsequently, the postulated photoelectrocatalytic POME treatment mechanism was elucidated by the radical scavenging study and Mott-Schottky (M-S) analysis. The following recycling test affirmed the stability and durability of the photoanode after four continuous repetition usages while the assessed electrical energy efficiency revealed the economic viability of PFC system serving as a post-treatment for abatement of POME. These findings contributed toward enhancing the sustainability criteria and economic viability of palm oil by adopting sustainable and efficient POME post-treatment technology.

Modelling of demolition waste generation: Application to Greek residential buildings

The construction sector in Europe is among the biggest waste generators, producing 370 million tonnes of construction and demolition waste (CDW) every year, which contain important secondary materials. Quantification of CDW is important from their circular management and environmental impact point of view. Thus, the overall objective of this study was to develop a modelling methodology for estimating demolition waste (DW) generation. The volumes (m3) of individual construction materials contained in 45 residential buildings in Greece were accurately estimated using computer-aided design (CAD) software and the materials were classified according to European List of Waste. These materials will become waste upon demolition, with a total estimated generation rate of 1590 kg m-2 of top view area and with concrete and bricks representing 74.5% of total. Linear regression models were developed to predict the total and individual amounts of 12 different building materials based on structural building characteristics. To test the accuracy of the models, the materials of two residential buildings were quantified and classified and the results were compared with the model predictions. Depending on the model used, the % differences between models' predictions and CAD estimates for total DW averaged 11.1% ± 7.4% for the first case study and 2.5% ± 1.5% for the second. The models can be used for accurate quantification of total and individual DW and their management within the framework of circular economy.

Leaching of Cr, Cu, Ni, and Zn from different solid wastes: Effects of adding adsorbents and using different leaching solutions

The leaching of potentially toxic elements from different industrial solid wastes (ISWs) must be understood to manage the environmental concerns they pose. The objective of this research was to investigate the effect of clay mineral (bentonite) and nanoparticle (MgO) on potentially toxic elements (Cr, Cu, Ni, Zn) leaching in some ISWs, when they leached with different leaching solutions. The highest amount of Zn and Ni was leached from ceramic factory waste (CFW) and stone cutting wastes (SCW), respectively, while the highest amount of Cr was leached from leather factory waste (LFW). In ISWs, the leaching percentage of Cu, Ni, and Zn were up to 11.2%, whereas the greatest leaching percentage of Cr was 26.7% of the total content. The addition of bentonite and MgO decreased potentially toxic element leaching. The results of effluents speciation of SFW indicated that at the beginning of leaching with CaCl2, nitric acid, and citric acid, 75.1%, 84.1%, and 39.6% of Cr were in different forms of Cr (III), respectively, while at the end of leaching the percentage of Cr (III) species were decreased and Cr (VI) species were increased to 83.6%, 88.4%, and 93.4%, respectively. The addition of bentonite and especially MgO to the ISWs reduced the leaching of potentially toxic elements as well as reduced the percentage of Cr (VI) in the effluents of SFW. The findings suggested that bentonite has the potential to be a low-cost and environmentally acceptable adsorbent for minimizing the leaching of Cr and other potentially toxic elements from ISWs.

Hydrothermal alkaline synthesis and release properties of silicon compound fertiliser using high-ash coal slime

High-ash coal slime is difficult to utilise as a boiler fuel, and its accumulation results in environmental pollution. In this study, we describe a new method for the preparation of high-ash coal slime silica compound fertiliser (HASF) using CaO-KOH mixed hydrothermal method to optimize the utilization of this industrial waste and relieve the pressure on the fertiliser industry. The coal slime (D0) used in this study and its dry basis ash content by 1 mol/L and 4 mol/L sulfuric acid pre-activation (D1, D4) were greater than 85%. The effective silicon content of D0, D1, and D4 silica compound fertilisers reached 30.24%, 31.24%, and 17.35%, respectively, and the sums of effective silica-calcium-potassium oxides were 57.28%, 58.87%, and 48.16%, respectively, under the optimal reaction conditions of 230 °C, 15 h, and 1 mol/L KOH, which met the market requirements, as determined using single-factor experiments. We used XRD, FTIR, and SEM-EDS analysis techniques to demonstrate that tobermorite and leucite were the main mineral phases of the compound fertiliser, and activated coal slime D4, which contains only quartz single crystals, required more demanding reaction conditions in the synthesis reaction. Subsequently, the cumulative release pattern of HASF silica was well described by the power function equation via repeated extraction and dissolution experiments, with the dissolution rate following D4 > D1 ≈ D0. Furthermore, 4 mol/L sulfuric acid pre-activation resulted in the enrichment of HASF combined with organic matter and increased the slow-release rate of HASF silica. Thus, the synthesized HASF could have potential application prospects in soil improvement and fertilisation.

Economic viability analysis of recycling waste plastic as aggregates in green sustainable concrete

Plastic waste management is one of the major global challenges at present. Recycling single used plastic waste as partial replacement of natural aggregates in concrete may reduce problems regarding mismanagement of plastic waste and unsustainable utilisation of natural resources as aggregates. This concept has been explored in many studies and positive results are obtained, but it has not been materialized at a large scale due to the uncertainty regarding economic viability. The present study therefore focuses on the economic aspects of using Polyethylene based fine aggregates and Polyethylene Terephthalate based coarse aggregates as partial replacement (10%, 20%, 30% and 40%) of natural fine and coarse aggregates separately and simultaneously, with special emphasis given on environmental and social cost. A material flow diagram using STAN is first developed to calculate plastic waste generation. An industrial survey has been conducted to estimate production cost of plastic aggregates, while social cost as WTP is determined through CVM method. The result shows that the total cost of concrete decreases with increase of replacement percentage and cost reduction varies between 0.65% and 7.58% compare to conventional concrete depending on the percentage and type of replacement without compromising strength. So, alongside being hugely beneficial to environment and society in terms of reduction of leachate and greenhouse gas generation, micro-plastic pollution, requirement of landfill area, mosquito borne diseases, erosion, sedimentation, land loss etc.; the concept of recycling plastic waste as partial replacement of natural aggregates in concrete has been proved to be economically viable and beneficial too.

Hybrid electrolysis and membranes system for apple packing houses water treatment

The apple industry uses high flows of potable quality water to transport and clean the apple, which is regularly contaminated. Thus, it is necessary to implement an efficient water treatment system during the industrial process, providing reductions in the intake and release flows. A hybrid system was developed by applying the electrolytic treatment by electrocoagulation using a batch process (Step 1) and a continuous process (Step 2), followed by a microfiltration membrane separation (MSP) process (Step 3). The optimal conditions for removal of organic matter, chemical oxygen demand, total suspended solids (TSS), turbidity, color, and fungi obtained in Step 1 were a hydraulic detention time of 40 min, stirring at 40 rpm, current density of 20 A/m2, pH of 8.00, and temperature of 10 °C. These findings led to a successful implementation in Step 2, which evolved into Step 3, where tests in the combined continuous electrolytic reactor together with MSP showed significant removal rates, notably reaching up to 54% organic matter (OM) removal, 72% chemical oxygen demand (COD) removal, 83% TSS removal, 92% haze and color removal, and 100% mildew removal. The hybrid system proved to be a promising alternative for implementation in the processing industry, minimizing environmental impacts and costs.

Aspen Plus simulation for effluent reuse in thermomechanical pulp mills

The objective of this study was to evaluate the closing of the water circuit and reusing the treated effluent in the production of TMP, using simulations performed with the Aspen Plus®. The treated effluent was reused to replace 50, 75 and 100% of the well water. An adaptation of the Aspen Plus® program simulating the TMP production process and a dynamic simulation test to verify the accumulation of non-process elements (NPEs) in industrial processes at different proportions of reuse were evaluated. The quality of the final product was assessed in laboratory bleaching tests for pulp brightness and brightness reversion. The concentrations of the NPE were 0.00097, 0.00122 and 0.00145 kmol/h for Mn2+, 0.012929, 0.018368 and 0.023595 kmol/h for Fe2+ and 0.000542, 0.000722 and 0.000948 kmol/h for Cu2+, with the recycling of the treated effluent of 50, 75 and 100%, respectively. The brightness and brightness reversion of the pulp were similar with the different proportions of effluent reuse and with the use of fresh industrial water, with values ranging from 83.37 to 83.97% ISO and 5.43 to 6.38 ISO units, respectively. The use of treated effluent did not affect the pulp quality, which could diminish the water use a pulp mil.