Inhibition of organosilane/ATP@HQ self-healing passivator for pyrite oxidation

Organosilane, with functional organic groups attached to inorganic silicon atoms, exhibits excellent passivation performance for pyrite. However, a considerable number of micro-cracks will gradually appear on the surface of passivation film under long-term corrosion of oxidizing medium, resulting in a significant decrease of passivation effect. To improve the stability and long-term performance of organosilane coating, a novel passivator (PT-ATP@HQ) with self-healing function was prepared to inhibit the oxidation of pyrite. We chose 3-mercaptopropyltrimethoxysilane (Prop-SH) and tetraethoxysilane (TEOS) as the host coating (PT), and attapulgite clay (ATP) loaded with 8-hydroxyquinoline (8-HQ) was used to endow the coating with better passivation and self-healing performance. The electrochemical and chemical leaching results showed that the addition of ATP@HQ greatly improved the passivation performance of PT coating. The passivation efficiencies of total Fe and SO₄^2- reached to 88.1% and 79.2%, respectively. We also found that the protective capability of the scratched PT-ATP@HQ coating can be recovered automatically through 8-HQ release from ATP. The passivation and self-healing mechanisms were investigated by FT-IR, XPS, ²⁹Si NMR, and other characterization methods, which were as follows: firstly, the organosilanes hydrolyzed to form highly active silanol groups, then dehydration condensation reaction occurred between silanol molecules and ATP@HQ to obtain cross-linked network structure connected by Si-O-Si bonds. After that, Si-OH groups reacted with the hydroxyl groups of pyrite to form Fe-O-Si bonds, thereby an inert and dense passivation film attached to the surface of pyrite. Once the passivation film is locally damaged, 8-HQ will automatically release to repair the cracks.

Towards the design of organosilicon compounds for environmental degradation by using structure biodegradability relationships

Organosilicon compounds have numerous applications in consumer products. After entering the environment most of them are resistant against microbial degradation and they persist in the environment. Accordingly, they are ubiquitously present in the environment. Therefore, better environmentally degradable organosilicon compounds are urgently needed. A systematic investigation of environmental degradability of organosilicon compounds allows to derive some general design principles, which in turn would enable chemists to reduce or better avoid environmental persistence of organosilicon compounds in the environment. Therefore, in this study, all organosilicon substances registered in the European Chemicals Agency (ECHA) database were evaluated for their environmental biodegradability. Results of own experiments with different organosilicon substances were added to extend the data basis. A dataset was generated. An assessment of all data was done and invalid data were excluded. The remaining 182 substances were grouped regarding their structure to derive general rules for the environmental biodegradability of organosilicon compounds. Non-biodegradable at all were for example cyclic, linear and branched siloxanes. Groups like ethers, esters, oximes, amines, and amides were prone to hydrolysis, which can result in readily biodegradable intermediates if they do not contain silicon functional groups anymore. This knowledge could be used for the design of better degradable organosilicon compounds as non-degradable substances should be avoided if they enter the environment after their usage.

Bispropylurea bridged polysilsesquioxane: A microporous MOF-like material for molecular recognition

Microporous organosilicas assembled from polysilsesquioxane (POSS) building blocks are promising materials that are yet to be explored in-depth. Here, we investigate the processing and molecular structure of bispropylurea bridged POSS (POSS-urea), synthesised through the acidic condensation of 1,3-bis(3-(triethoxysilyl)propyl)urea (BTPU). Experimentally, we show that POSS-urea has excellent functionality for molecular recognition toward acetonitrile with an adsorption level of 74 mmol/g, which compares favourably to MOFs and zeolites, with applications in volatile organic compounds (VOC). The acetonitrile adsorption capacity was 132-fold higher relative to adsorption capacity for toluene, which shows the pores are highly selective towards acetonitrile adsorption due to their size and arrangement. Theoretically, our tight-binding density functional and molecular dynamics calculations demonstrated that this BTPU based POSS is microporous with an irregular placement of the pores. Structural studies confirm maximal pore sizes of ∼1 nm, with POSS cages possessing an approximate edge length of ∼3.16 Å.

Aggregation and Solvation of Sodium Hexamethyldisilazide: Across the Solvent Spectrum

We report solution structures of sodium hexamethyldisilazide (NaHMDS) solvated by >30 standard solvents (ligands). These include: toluene, benzene, and styrene; triethylamine and related trialkylamines; pyrrolidine as a representative dialkylamine; dialkylethers including THF, tert-butylmethyl ether, and diethyl ether; dipolar ligands such as DMF, HMPA, DMSO, and DMPU; a bifunctional dipolar ligand nonamethylimidodiphosphoramide (NIPA); polyamines N,N,N',N'-tetramethylenediamine (TMEDA), N,N,N',N″,N″-pentamethyldiethylenetriamine (PMDTA), N,N,N',N'-tetramethylcyclohexanediamine (TMCDA), and 2,2'-bipyridine; polyethers 12-crown-4, 15-crown-5, 18-crown-6, and diglyme; 4,7,13,16,21,24-hexaoxa-1,10-diazabicyclo[8.8.8]hexacosane ([2.2.2] cryptand); and tris[2-(2-methoxyethoxy)ethyl]amine (TDA-1). Combinations of 1H, 13C, 15N, and 29Si NMR spectroscopies, the method of continuous variations, X-ray crystallography, and density functional theory (DFT) computations reveal ligand-modulated aggregation to give mixtures of dimers, monomers, triple ions, and ion pairs. 15N-29Si coupling constants distinguish dimers and monomers. Solvation numbers are determined by a combination of solvent titrations, observed free and bound solvent in the slow exchange limit, and DFT computations. The relative abilities of solvents to compete in binary mixtures often match that predicted by conventional wisdom but with some exceptions and evidence of both competitive and cooperative (mixed) solvation. Crystal structures of a NaHMDS cryptate ion pair and a 15-crown-5-solvated monomer are included. Results are compared with those for lithium hexamethyldisilazide, lithium diisopropylamide, and sodium diisopropylamide.

Meeting the Challenges in Cancer Care Management During the SARS-Cov-2 Pandemic: A Retrospective Analysis

BACKGROUND

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic has overwhelmed the capacity of healthcare systems worldwide. Cancer patients, in particular, are vulnerable and oncology departments drastically needed to modify their care systems and established new priorities. We evaluated the impact of SARS-CoV-2 on the activity of a single cancer center.

METHODS

We performed a retrospective analysis of (i) volumes of oncological activities (2020 vs 2019), (ii) patients' perception rate of the preventive measures, (iii) patients' SARS-CoV-2 infections, clinical signs thereof, and (iv) new diagnoses made during the SARS-CoV-2 pandemic.

RESULTS

As compared with a similar time frame in 2019, the overall activity in total numbers of outpatient chemotherapy administrations and specialist visits was not statistically different (P = .961 and P = .252), while inpatient admissions decreased for both medical oncology and thoracic oncology (18% (P = .0018) and 44% (P < .0001), respectively). Cancer diagnosis plummeted (-34%), but no stage shift could be demonstrated.Acceptance and adoption of hygienic measures was high, as measured by a targeted questionnaire (>85%). However, only 46.2% of responding patients regarded telemedicine, although widely deployed, as an efficient surrogate to a consultation.Thirty-three patients developed SARS-CoV-2, 27 were hospitalized, and 11 died within this time frame. These infected patients were younger, current smokers, and suffered more comorbidities.

CONCLUSIONS

This retrospective cohort analysis adds to the evidence that continuation of active cancer therapy and specialist visits is feasible and safe with the implementation of telemedicine. These data further confirm the impact of SARS-CoV-2 on cancer care management, cancer diagnosis, and impact of infection on cancer patients.

FRET probe for selective and sensitive detection of vitamin A by cadmium free quantum dots (ZnS)

Vitamin A as a powerful antioxidant plays an important role in human body functions including bone remodeling regulation, healthy immune system and cell growth reproduction. An accurate determination of vitamin A is taken into consideration because of its importance for human health. In this paper, we reported a fluorescence resonance energy transfer (FRET) probe, MPS-capped ZnS QDs, for sensitive and selective detection of vitamin A. The colloidal MPS-capped ZnS QDs were prepared from Zinc acetate and sodium sulfide by employing 3-mercaptopropyltrimethoxysilane (MPS) molecules as the stabilizer or capping agent at the pH condition of 10. The synthesized MPS-capped ZnS QDs were characterized by means of FT-IR, UV-Vis, DLS, and TEM techniques. The sensing behavior of MPS-capped ZnS QDs for selective and sensitive detection of vitamin A, vitamin B₂, vitamin B₆, vitamin E, vitamin K, vitamin H, vitamin D₃ and vitamin C was investigated using fluorescence spectroscopy. The detection mechanism involves photoinduced charge transfer from the surface of ZnS QDs to Vitamin resulting in the fluorescence quenching of ZnS QDs followed by nonradiative fluorescence resonance energy transfer. An excellent selectivity was observed for vitamin A versus other tested species. A linear relationship was observed between the fluorescence intensity of MPS-capped ZnS QDs and the concentration of vitamin A in the range of 3.33-36.66 μM with detection limit of 1.062 μM.

Thiol-modified biochar synthesized by a facile ball-milling method for enhanced sorption of inorganic Hg2+ and organic CH3Hg. JOURNAL OF HAZARDOUS MATERIALS 2020;384:121357. [PMID: 31630859 DOI: 10.1016/j.jhazmat.2019.121357]

Modification of thiol on biochar often demands complex synthetic procedures and chemicals. In this work, a simple and environment friendly thiol-modified biochar (BMS-biochar) was successfully synthesized by ball milling pristine biochar with 3-mercaptopropyltrimethoxysilane (3-MPTS). The resultant BMS-biochar was characterized and tested for aqueous inorganic Hg²⁺ and organic CH₃Hg⁺ removal. Characterization results showed that 3-MPTS was loaded on the surface of biochar through oxygen-containing functional groups (i.e., OH and CO) and π-π bond. Ball milling method improved the properties of BMS-biochar, namely, more efficient SH load, a larger surface area, more functional groups, more negatively charged surface, which resulted in higher removal efficiency of Hg²⁺ and CH₃Hg⁺ (320.1 mg/g for Hg²⁺ and 104.9 mg/g for CH₃Hg⁺) compared to the pristine biochar (105.7 mg/g for Hg²⁺ and 8.21 mg/g for CH₃Hg⁺) and thiol-modified biochar through chemical impregnation (CIS-biochar) (175.6 mg/g for Hg²⁺ and 58.0 mg/g for CH₃Hg⁺). Ball milling increased the sorption capacities of Hg²⁺ and CH₃Hg⁺ through surface adsorption, electrostatic attraction, ligand exchange, and surface complexation. Modeling results suggested that the surface diffusion was the rate-limiting adsorption step for BMS-biochar. This work gave prominence to the potential of ball milling for the preparation of thiol-modified biochar to remove mercury especially organic CH₃Hg⁺ by adsorption.

Specific Core-Satellite Nanocarriers for Enhanced Intracellular ROS Generation and Synergistic Photodynamic Therapy

The deficiency of reactive oxygen species (ROS) is the main reason for the current poor efficiency of tumor photodynamic therapy (PDT). To solve this problem, a simple light-triggered core-satellite nanoplatform (UPSD@Au) has been developed by loading Au nanoparticles on the surface of mesoporous silica-coated upconversion nanoparticles. Small molecules DC50 (C₁₇H₁₄BrF₂N₃OS) and photosensitizer (silicon phthalocyanine dihydroxide, SPCD) were loaded into the silica shell to improve ROS production. Meanwhile, PDT can be triggered through facile near-infrared laser irradiation given the occurrence of a moderate photothermal transfer process between upconversion nanoparticles and Au. The reasonable increment in temperature induced by Au resulted in the timely release of DC50. The inhibition of copper transfer by DC50 results in reduced ROS scavenging and thus improves light-triggered ROS accumulation. Notably, the expression levels of the human copper-trafficking proteins Atox1 and CCS in cancerous cells exceed those in normal cells, and thus enhanced ROS accumulation effect was achieved in cancerous cells. In vitro and in vivo results demonstrate that the synergism between DC50 and SPCD coloaded in the UPSD@Au nanoplatform increases the efficiency of PDT. The UPSD@Au platform represents an efficient codelivery method for hydrophobic small molecules and improves sensitization to specific cancer therapy.

Monolayers of an organosilane on magnetite nanoparticles for the fast removal of Cr(VI) from water

Monolayers of N-(2-aminoethyl)-3-aminopropyltrimethoxysilane have been established on magnetite nanoparticles to develop a novel magnetic adsorbent for fast decontamination of hexavalent chromium (Cr(VI)) from water. Results indicated that monolayer adsorption of the silane from water took place at low concentrations (<300 mg/L) and around 100% surface coverage was obtained at temperatures ≥90°C. The hydrolysed silane was anchored to the magnetite surface through condensation reactions between its silanol groups and the surface hydroxyl groups of magnetite. The functional amine groups were protonated by acid treatment for adsorbing Cr(VI). The monolayer of the silane on magnetite (MSM) with approximately 100% surface coverage showed extremely rapid adsorption kinetics for Cr(VI), such that the process was complete within 1 min. This enables the treatment of large amounts of sewage per unit time. The adsorption capacity for Cr(VI) was 8.0 mg/g, as estimated from the Langmuir isotherm model. The saturation magnetization of the MSM reached 64.16 emu/g, allowing easy magnetic recovery from water. In the presence of up to 50-fold molar excesses of chloride and nitrate anions, little effect on Cr(VI) removal was seen, but moderate and large impacts were observed with sulphate and hydroxyl anions, respectively. Desorption of adsorbed Cr(VI) and regeneration of the MSM were successfully achieved by NaOH and HCl treatments to deprotonate and protonate the amine groups, respectively. By selecting a silane with suitable functional groups, the surface properties may be tailored for a particular pollutant.

Mercapto-Functionalized Porous Organosilica Monoliths Loaded with Gold Nanoparticles for Catalytic Application

Porous organosilica monoliths have attracted much attention from both the academic and industrial fields due to their porous structure; excellent mechanical property and easily functionalized surface. A new mercapto-functionalized silicone monolith from a precursor mixture containing methyltrimethoxysilane; 3-mercaptopropyltrimethoxysilane; and 3-mercaptopropyl(dimethoxy)methylsilane prepared via a two-step acid/base hydrolysis–polycondensation process was reported. Silane precursor ratios and surfactant type were varied to control the networks of porous monolithic gels. Gold nanoparticles were loaded onto the surface of the porous organosilica monolith (POM). Versatile characterization techniques were utilized to investigate the properties of the synthesized materials with and without gold nanoparticles. Scanning electron microscopy was used to investigate the morphology of the as-synthesized porous monolith materials. Fourier transform infrared spectroscopy was applied to confirm the surface chemistry. ²⁹Si nuclear magnetic resonance was used to investigate the hydrolysis and polycondensation of organosilane precursors. Transmission electron microscopy was carried out to prove the existence of well-dispersed gold nanoparticles on the porous materials. Ultraviolet–visible spectroscopy was utilized to evaluate the high catalytic performance of the as-synthesized Au/POM particles

Boron-titanate monolayer nanosheets for highly selective adsorption of immunoglobulin G

Boron-titanate monolayer nanosheets were prepared through a scalable step by step intercalation approach for anchoring 3-mercaptopropyltriethoxysilane (MPTS) on the surface. MPTS provides clickable sites with 4-vinylphenylboronic acid (VPBA) via a thiol-ene (TE) click reaction to obtain monolayer titanate nanosheets with boronic acid ligands immobilized on the surface. The nanosheets obtained are denoted as VPBA-MPTS-TiNSs, with a lateral dimension of a few dozen nanometers and with a thickness of ca. 3.5 nm. The nanosheets exhibit a superior adsorption capacity of 1669.7 mg g-1 and favorable selectivity for the adsorption of glycoproteins by employing immunoglobulin G (IgG) as the protein model. The adsorbed IgG is thereafter readily collected by using 0.1% (m/v) cetane trimethyl ammonium bromide (CTAB) as the eluent. The practical applications of VPBA-MPTS-TiNSs are further demonstrated by the selective adsorption/purification of IgG from human serum.

Osteoblast adhesion and response mediated by terminal -SH group charge surface of SiOxCy nanowires

Robust cell adhesion is known to be necessary to promote cell colonization of biomaterials and differentiation of progenitors. In this paper, we propose the functionalization of Silicon Oxycarbide (SiO_xC_y) nanowires (NWs) with 3-mercaptopropyltrimethoxysilane (MPTMS), a molecule containing a terminal -SH group. The aim of this functionalization was to develop a surface capable to adsorb proteins and promote cell adhesion, proliferation and a better deposition of extracellular matrix. This functionalization can be used to anchor other structures such as nanoparticles, proteins or aptamers. It was observed that surface functionalization markedly affected the pattern of protein adsorption, as well as the in vitro proliferation of murine osteoblastic cells MC3T3-E1, which was increased on functionalized nanowires (MPTMS-NWs) compared to bare NWs (control) (p < 0.0001) after 48 h. The cells showed a better adhesion on MPTMS-NWs than on bare NWs, as confirmed by immunofluorescence studies on the cytoskeleton, which showed a more homogeneous vinculin distribution. Gene expression analysis showed higher expression levels for alkaline phosphatase and collagen I, putative markers of the osteoblast initial differentiation stage. These results suggest that functionalization of SiO_xC_y nanowires with MPTMS enhances cell growth and the expression of an osteoblastic phenotype, providing a promising strategy to improve the biocompatibility of SiO_xC_y nanowires for biomedical applications.

Whole genome variant association across 100 dogs identifies a frame shift mutation in DISHEVELLED 2 which contributes to Robinow-like syndrome in Bulldogs and related screw tail dog breeds

Domestic dog breeds exhibit remarkable morphological variations that result from centuries of artificial selection and breeding. Identifying the genetic changes that contribute to these variations could provide critical insights into the molecular basis of tissue and organismal morphogenesis. Bulldogs, French Bulldogs and Boston Terriers share many morphological and disease-predisposition traits, including brachycephalic skull morphology, widely set eyes and short stature. Unlike other brachycephalic dogs, these breeds also exhibit vertebral malformations that result in a truncated, kinked tail (screw tail). Whole genome sequencing of 100 dogs from 21 breeds identified 12.4 million bi-allelic variants that met inclusion criteria. Whole Genome Association of these variants with the breed defining phenotype of screw tail was performed using 10 cases and 84 controls and identified a frameshift mutation in the WNT pathway gene DISHEVELLED 2 (DVL2) (Chr5: 32195043_32195044del, p = 4.37 X 10-37) as the most strongly associated variant in the canine genome. This DVL2 variant was fixed in Bulldogs and French Bulldogs and had a high allele frequency (0.94) in Boston Terriers. The DVL2 variant segregated with thoracic and caudal vertebral column malformations in a recessive manner with incomplete and variable penetrance for thoracic vertebral malformations between different breeds. Importantly, analogous frameshift mutations in the human DVL1 and DVL3 genes cause Robinow syndrome, a congenital disorder characterized by similar craniofacial, limb and vertebral malformations. Analysis of the canine DVL2 variant protein showed that its ability to undergo WNT-induced phosphorylation is reduced, suggesting that altered WNT signaling may contribute to the Robinow-like syndrome in the screwtail breeds.

Cytocompatibility and Osteogenesis of Adipose Tissue-Derived Stem Cells on POSS-PEG Coated Collagen

Nanostructured POSS-PEG nanoparticles (NPs, 42.4 nm ~) synthesized by formation of the urethane linkage between the monoisocyanate group (O═C═N-) of Polyhedral oligosilsesquioxane (POSS) macromers and the diol end groups (-OH) of polyethylene glycol (PEG) homopolymers as catalyzed by dibutyl tin dilaurate are of great interest for biomedical applications. However, NP materials based on nonorganic compounds can be cytotoxic. In this study, the preparation of PEG-POSS NPs followed the coating collagen assembly, which alleviates this problem. They also showed controlled surface properties in such a manner that hydrophobicity and biocompatibility were both reachable to give rise to improved cell viability. It indicates that the PEG-POSS coated collagen was appropriate for the proliferation of adipose tissue-derived stem cells to osteogenesis.

Photosensitizer (PS)/polyhedral oligomeric silsesquioxane (POSS)-crosslinked nanohybrids for enhanced imaging-guided photodynamic cancer therapy

Photodynamic therapy (PDT) has drawn extensive attention as a promising cancer treatment modality. However, most PDT nanoagents suffer from insufficient drug loading capacity, a severe self-quenching effect, premature release of drugs and/or potential toxicity. Herein, we rationally designed an inorganic-organic nanohybrid with high drug loading capacity and superior chemical stability for enhanced PDT. Polyhedral oligomeric silsesquioxane (POSS), an amine-containing cage-shaped building block, was crosslinked with chlorin e6 (Ce6), a carboxyl-containing photosensitizer, via the amine-carboxyl reaction. Polyethylene glycol (PEG) polymers were further modified on the surface of the nanoparticle to improve the aqueous dispersibility and prolong the circulation time of the final nanoconstruct (POSS-Ce6-PEG). The as-prepared POSS-Ce6-PEG has a considerably high loading rate of Ce6 (19.8 wt%) with desirable fluorescence emission and singlet oxygen generation. Besides, in vitro experiments revealed that the nanoagent exhibited enhanced cellular uptake and a preferred intracellular accumulation within mitochondria and the endoplasmic reticulum, resulting in high anticancer efficiency under light irradiation. Furthermore, in vivo imaging-guided PDT was also successfully achieved, showing the effective tumor targeting and ablation ability of POSS-Ce6-PEG. More importantly, the nanoagent possesses negligible dark cytotoxicity and systemic side effects. Therefore, POSS-Ce6-PEG as an eligible PDT theranostic agent holds great potential in clinical applications.

The effect of multiple thin-film coatings of protein loaded sol-gel on total multi-electrode array thickness

Tetramethyl orthosilicate shows promise as a thin-film delivery vehicle for multi-electrode arrays for drug release and electrical performance; however, its effect upon device footprint has yet to be assessed. Using a previously established silicon wafer chip model, the thickness of one, two, and four protein doped coatings of sol-gel were analyzed via profilometry. Coating thickness was found to be 0.4μm, 1.1μm and 2.2μm on each side of the device. This addition to a native MEA is minimal when compared to other drug delivery paradigms currently associated with neural implants.

Subcellular co-delivery of two different site-oriented payloads for tumor therapy

Co-delivery of multiple agents via nanocarriers is of great interest in cancer therapy, but subcellular delivery to the corresponding site of action remains challenging. Here we report a smart nanovehicle which enables two different site-oriented payloads to reach their targeted organelles based on stimulus-responsive release and nucleus-targeted modification. First, all trans retinoic acid (RA) conjugated camptothecin (RA-CPT) was loaded in a polyhedral oligomericsilsesquioxane (POSS)-based core; docetaxel (DTX) was grafted on N-(2-hydroxypropyl) methacrylamide (HPMA) copolymers. The POSS core grafted with semitelechelic HPMA copolymers then self-assembled into micelles. Once internalized into the cell, the two drugs were unleashed environment-responsively, and nuclear targeted RA remarkably facilitated the nuclear transport of CPT. Compared with single drug-loaded micelles, the dual drug-loaded platform showed superior synergic cytotoxicity, which was further strengthened by the involvement of RA. The ability to induce DNA damage and apoptosis was also enhanced by nucleus-targeted modification. Finally, dual drug-loaded micelles exhibited much better in vivo tumor inhibition (87.1%) and less systemic toxicity than the combination of single drug-loaded systems or the dual drug-loaded micelles without RA. Therefore, our study provides a novel "one platform, two targets" strategy in combinatory anti-cancer therapy.

Study of SEM preparation artefacts with correlative microscopy: Cell shrinkage of adherent cells by HMDS-drying

One of the often reported artefacts during cell preparation to scanning electron microscopy (SEM) is the shrinkage of cellular objects, that mostly occurs at a certain time-dependent stage of cell drying. Various methods of drying for SEM, such as critical point drying, freeze-drying, as well as hexamethyldisilazane (HMDS)-drying, were usually used. The latter becomes popular since it is a low cost and fast method. However, the correlation of drying duration and real shrinkage of objects was not investigated yet. In this paper, cell shrinkage at each stage of preparation for SEM was studied. We introduce a shrinkage coefficient using correlative light microscopy (LM) and SEM of the same human mesenchymal stem cells (hMSCs). The influence of HMDS-drying duration on the cell shrinkage is shown: the longer drying duration, the more shrinkage is observed. Furthermore, it was demonstrated that cell shrinkage is inversely proportional to cultivation time: the longer cultivation time, the more cell spreading area and the less cell shrinkage. Our results can be applicable for an exact SEM quantification of cell size and determination of cell spreading area in engineering of artificial cellular environments using biomaterials. SCANNING 38:625-633, 2016. © 2016 Wiley Periodicals, Inc.

Removal of nickel and cadmium heavy metals using nanofiber membranes functionalized with (3-mercaptopropyl)trimethoxysilane (TMPTMS)

Functionalized nanofibrous membranes have been produced via electrospinning with a polymer solution of 19% (w/w) of nylon 66 prepared in a formic acid/chloroform mixture (75:25 v/v). The optimum parameters of electrospinning, like voltage, flow rate, tip and collector distances, were achieved and produced nanofiber membranes with a thickness of 287 nm. Then the nanofiber membranes were functionalized by (3-mercaptopropyl)trimethoxysilane (TMPTMS) at various amounts. Three different initial concentrations of metal ions and three different levels of pH were chosen. The effect of filtration process parameters such as the initial concentration of metal solution, pH of the solution, and the amount of functionalizer trimethoxysilane (TMPTMS) on the adsorption was studied. In surveying filtration process parameters, the results showed that metal ion rejection increased by increasing the pH of the solution and decreased by increasing the initial concentration of the effluent. By increasing the amount of functionalizer, removal efficiency increased. The results showed that the maximum efficiency of absorption of cadmium and nickel were 93.0 and 97.6%, respectively, and the filtering mechanism of the membrane is the blocking pores type. The adsorption data of cadmium and nickel ions fitted particularly well with the Freundlich isotherm.

Development of mechano-responsive polymeric scaffolds using functionalized silica nano-fillers for the control of cellular functions

We demonstrate an efficient method to produce mechano-responsive polymeric scaffolds which can alter cellular functions using two different functionalized (OH and NH2) silica nano-fillers. Fumed silica-hydroxyl and fumed silica-amine nano-fillers were mixed with a biocompatible polymer (POSS-PCU) at various wt% to produce scaffolds. XPS and mechanical testing demonstrate that bulk mechanical properties are modified without changing the scaffold's surface chemistry. Mechanical testing showed significant change in bulk properties of POSS-PCU scaffolds with an addition of silica nanofillers as low as 1% (P<0.01). Scaffolds modified with NH2 silica showed significantly higher bulk mechanical properties compared to the one modified with the OH group. Enhanced cell adhesion, proliferation and collagen production over 14days were observed on scaffolds with higher bulk mechanical properties (NH2) compared to those with lower ones (unmodified and OH modified) (P<0.05) during in vitro analysis. This study provides an effective method of manufacturing mechano-responsive polymeric scaffolds, which can help to customize cellular responses for biomaterial applications.

Plasma Surface Modification of Polyhedral Oligomeric Silsequioxane-Poly(carbonate-urea) Urethane with Allylamine Enhances the Response and Osteogenic Differentiation of Adipose-Derived Stem Cells

This study present amino functionalization of biocompatible polymer polyhedral oligomeric silsequioxane-poly(carbonate-urea) urethane (POSS-PCU) using plasma polymerization process to induce osteogenic differentiation of adipose derived stem cells (ADSCs). Optimization of plasma polymerization process was carried out keeping cell culture application in mind. Thus, samples were rigorously tested for retention of amino groups under both dry and wet conditions. Physio-chemical characterization was carried out using ninhydrin test, X-ray photon spectroscopy, scanning electron microscopy, and static water contact analysis. Results from physio chemical characterization shows that functionalization of the amino group is not stable under wet conditions and optimization of plasma process is required for stable bonding of amino groups to the POSS-PCU polymer. Optimized samples were later tested in vitro in short and long-term culture to study differentiation of ADSCs on amino modified samples. Short-term cell culture shows that initial cell attachment was significantly (p < 0.001) improved on amine modified samples (NH2-POSS-PCU) compared to unmodified POSS-PCU. NH2-POSS-PCU samples also facilitates osteogenic differentiation of ADSCs as confirmed by immunological staining of cells for extracellular markers such as collagen Type I and osteopontin. Quantification of total collagen and ALP activity also shows significant (p < 0.001) increase on NH2-POSS-PCU samples compared to unmodified POSS-PCU. A pilot study also confirms that these optimized amino modified POSS-PCU samples can further be functionalized using bone inducing peptide such as KRSR using conventional wet chemistry. This further provides an opportunity for biofunctionalization of the polymer for various tissue specific applications.

Spike-dip transformation of Setaria viridis

Traditional method of Agrobacterium-mediated transformation through the generation of tissue culture had limited success for Setaria viridis, an emerging C4 monocot model. Here we present an efficient in planta method for Agrobacterium-mediated genetic transformation of S. viridis using spike dip. Pre-anthesis developing spikes were dipped into a solution of Agrobacterium tumefaciens strain AGL1 harboring the β-glucuronidase (GUS) reporter gene driven by the cauliflower mosaic virus 35S (CaMV35S) promoter to standardize and optimize conditions for transient as well as stable transformations. A transformation efficiency of 0.8 ± 0.1% was obtained after dipping of 5-day-old S3 spikes for 20 min in Agrobacterium cultures containing S. viridis spike-dip medium supplemented with 0.025% Silwet L-77 and 200 μm acetosyringone. Reproducibility of this method was demonstrated by generating stable transgenic lines expressing β-glucuronidase plus (GUSplus), green fluorescent protein (GFP) and Discosoma sp. red fluorescent protein (DsRed) reporter genes driven by either CaMV35S or intron-interrupted maize ubiquitin (Ubi) promoters from three S. viridis genotypes. Expression of these reporter genes in transient assays as well as in T1 stable transformed plants was monitored using histochemical, fluorometric GUS activity and fluorescence microscopy. Molecular analysis of transgenic lines revealed stable integration of transgenes into the genome, and inherited transgenes expressed in the subsequent generations. This approach provides opportunities for the high-throughput transformation and potentially facilitates translational research in a monocot model plant.

A simple electrochemical biosensor based on AuNPs/MPS/Au electrode sensing layer for monitoring carbamate pesticides in real samples

A simple electrochemical biosensor for quantitative determination of carbamate pesticide was developed based on a sensing interface of citrate-capped gold nanoparticles (AuNPs)/(3-mercaptopropyl)-trimethoxysilane (MPS)/gold electrode (Au). The biosensor was fabricated by firstly assembling three-dimensional (3D) MPS networks on Au electrode and subsequently assembling citrate-capped AuNPs on 3D MPS network via AuS bond. The interface of AuNPs/MPS/Au was negatively charged originating from the citrate coated on AuNPs that would repulse the negatively charged ferricyanide ([Fe(CN)6](3-/4-)) to produce a negative response. In the presence of acetylcholinesterase (AChE) and acetylthiocholine (ATCl), the AChE catalyzes the hydrolysis of ATCl into positively charged thiocholine which would replace the citrate on AuNPs through the strong AuS bond and convert the negative charged surface to be positively charged. The resulted positively charged AuNPs/MPS/Au then attracted the [Fe(CN)6](3-/4-) to produce a positive response. Based on the inhibition of carbamate pesticides on the activity of AChE, the pesticide could be quantitatively determined at a very low potential. The linear range was from 0.003 to 2.00 μM. The sensing platform was also proved to be suitable for carbamate pesticides detection in practical sample.

Influence of Sol-Gel Conditions on the Growth of Thiol-Functionalized Silsesquioxanes Prepared by In Situ Water Production

Thiol-functionalized oligosilsesquioxanes have been synthesized by sol-gel chemistry via the in-situ water production (ISWP) approach, exploiting the esterification reaction of chloro-acetic acid and 1-propanol. The extent of hydrolysis-condensation of 3-Mercaptopropyltrimethoxysilane (McPTMS) has been studied by FT-IR and NMR spectroscopy, gel permeation chromatography (GPC) and MALDI-TOF techniques. The esterification reaction plays a key role in ruling out the oligomer structural development. In this work, we have investigated the influence of the theoretical amount of water available for the organosilane hydrolysis, defined by the ratio of chloro-acetic acid to McPTMS in the reaction mixture, and the role of different catalysts like trifluoroacetic acid (TFA) and dibutyldilauryltin (DBTL). The behavior of the catalyst is complex since, according to its nature, it may improve the kinetics of the sol-gel reactions and the esterification reaction as well. Comparing the reactions carried out with under-stoichiometric water content, the degree of condensation of the silsesquioxanes is higher if the reaction is catalyzed by TFA than by DBTL, because TFA may improve the kinetics of both hydrolysis-condensation and esterification reactions. The use of DBTL in under-stoichiometric and stoichiometric hydrolytic conditions raises the yield in ladder-like structures. The degree of condensation generally increases increasing the hydrolysis ratio as well as the yield in cage-like structures. However, when an over-stoichiometric amount of water is provided for the sol-gel reaction, condensation degree and ratio among cages and ladder-like structures appear unaffected by the employed catalyst.

Silica Ouzo Effect: Amphiphilic Drugs Facilitate Nanoprecipitation of Polycondensed Mercaptosilanes

Amphiphilic drugs are therapeutic agents whose molecular structures contain both hydrophobic and hydrophilic portions. Here we report a systematic study on how amphiphilic drugs can assist in silica nanoprecipitation. 3-Mercaptopropyltrimethoxysilane (MPTMS) was used as the sole silica material and 12 amphiphilic drugs spanning a wide spectrum of therapeutic categories were included. MPTMS polycondensation was conducted in a DMSO-based organic phase. After a sufficient time, particle formation was induced by injecting a small amount of the organic phase into a water solution containing various amphiphiles. The results show that all amphiphilic drugs studied exerted concentration-dependent facilitating effect on nanoparticle formation. Under certain preparation conditions, the particle solution showed physical stability over a long period and the formed particles could be as small as 100 nm. By systematically varying drug concentrations and injection volumes, the ability of each amphiphile to promote nanoprecipitation can be quantified and compared, based on two novel indices: the area under the critical volume-concentration curve (AUC) and the critical stabilization concentration (CSC). We demonstrate that both ability indices significantly correlated with the drug's log P and critical micelle concentrations (CMC). Furthermore, we have optimized the aging and particle purification condition and extensively characterized our system through comprehensive TEM and zeta-potential measurements, as well as determinations for drug entrapment and release. In conclusion, we have established a quantitative structure-activity relationship for amphiphilic small-molecular drugs in their ability to interact with poly(mercaptopropyl)silsesquioxane species and form nanoparticles via solvent shifting. We speculate that both hydrophobic and electrostatic interactions play important roles in the formation and stabilization of nanoparticles.