Exploring the scientific research on coal fly ash and agriculture: knowledge mapping and future research directions

This paper aims at synthesizing the scientific research on coal fly ash and agriculture using bibliometric analysis. The research on fly ash and agriculture has grown at 6.7% annually during 1973-2022, where much attention has been received after 2007. The number of publications on coal fly ash and agriculture reached above 100 in the year 2010, which further increased to 299 by 2020. The research productivity has been assessed as the most influential countries, journals, and documents in terms of a number of publications and citations on fly ash and agriculture. India is the most productive country in terms of knowledge on coal fly ash and agriculture with 38% of the global publications, while Environmental Science and Pollution Research is the leading journal with 19 publications. The article on assessing the impact of fly ash incorporation in soil systems by Pandey and Singh (2010), having 349 citations with 26.85 citations per year is one of the leading publications globally. Further, science mapping has been conducted to comprehend the current research focus and discover the emerging themes for future research. The finding of the thematic map based on the level of development and importance indicate that FA can be effectively explored as soil-additive for improved physical, chemical and biological properties and enhanced plant nutrients. The findings provide several aspects of fly ash and suggest future research directions to study the potential of using coal fly ash in agriculture to gain an agronomic advantage.

Study on application and environmental effect of phosphogypsum-fly ash-red mud composite cemented paste backfill

Phosphogypsum (PG) cementitious paste backfill (CPB) was prepared by using PG and fly ash (FA) as the main raw materials, red mud (RM) as the alkaline activator, Portland cement (OPC) as the binder, and silica fume (SF) as the additive, and its properties were investigated to achieve the objective of "treating harm with waste." The results showed that the addition of OPC facilitated the flowability of the slurry, while the addition of RM and SF had the opposite effect. The slurry presented ideal flowability when the water/binder ratio was 0.2 and the superplasticizer (SP) content was 0.7%. The mechanical properties and water resistance were improved significantly with increasing OPC, RM, and SF doping. The strength of the CPB material exceeded 22 MPa after curing at room temperature for 28 days, which met the mine filling requirements. Changes in the ion concentrations of the solution were first monitored during immersion. The dissolution rules of Ca2+ and SO42- at different immersion ages confirmed that RM promoted the continuous hydration of CPB, which was the key to improve water resistance. Microstructural analysis showed that the main hydration products were AFt and C-S-H, which played an important role in the strength development of the material. The leaching results demonstrated that the metal ion content satisfied the requirements of the III categories of Chinese environmental standards (GB/T 14848-2017), indicating that the technology is a reliable and environmentally friendly technology for PG, FA, and RM recovery that can simultaneously support safe mining.

Density functional theory study on the formation mechanism of CaClOH in municipal solid waste incineration fly ash

Municipal solid waste incineration (MSWI) fly ash is defined as a kind of hazardous waste because of its high levels of multiple pollutants. The main component of MSWI fly ash is CaClOH, and the characteristics have not achieved consensus. And density functional theory (DFT) was used to calculate the formation process of CaClOH in this study, which mainly included HCl adsorption on CaO (0 0 1) surface and Ca(OH)2 (0 0 1) surface and the surface reaction process. The reaction mechanism was investigated. The results showed that the maximum adsorption energies of HCl on CaO and Ca(OH)2 surfaces reached - 195.17 kJ/mol and - 83.48 kJ/mol, respectively, representing strong chemisorption. The chemisorption process was shown as the adsorption of H atom on O site, and the adsorption capacity was reflected in the adsorption range of O site. The significant electron density overlap between O site and H atom meant that a new chemical bond formed, which made the adsorption structure stable. The adsorption energy of multi-HCl adsorption on the crystal surfaces was not proportional to the number of HCl molecule, indicating that the adsorption processes were influenced by each other. After surface reaction, the H-Cl bond was broken completely, and the structure of CaO and Ca(OH)2 changed to new structures. According to transition state (TS) search, the formation of CaClOH had a higher priority, easier than that of CaCl2, explaining the presence of CaClOH in fly ash. The study provides helpful information for the solidification treatment of fly ash.

Hydrothermal alkaline synthesis and release properties of silicon compound fertiliser using high-ash coal slime

High-ash coal slime is difficult to utilise as a boiler fuel, and its accumulation results in environmental pollution. In this study, we describe a new method for the preparation of high-ash coal slime silica compound fertiliser (HASF) using CaO-KOH mixed hydrothermal method to optimize the utilization of this industrial waste and relieve the pressure on the fertiliser industry. The coal slime (D0) used in this study and its dry basis ash content by 1 mol/L and 4 mol/L sulfuric acid pre-activation (D1, D4) were greater than 85%. The effective silicon content of D0, D1, and D4 silica compound fertilisers reached 30.24%, 31.24%, and 17.35%, respectively, and the sums of effective silica-calcium-potassium oxides were 57.28%, 58.87%, and 48.16%, respectively, under the optimal reaction conditions of 230 °C, 15 h, and 1 mol/L KOH, which met the market requirements, as determined using single-factor experiments. We used XRD, FTIR, and SEM-EDS analysis techniques to demonstrate that tobermorite and leucite were the main mineral phases of the compound fertiliser, and activated coal slime D4, which contains only quartz single crystals, required more demanding reaction conditions in the synthesis reaction. Subsequently, the cumulative release pattern of HASF silica was well described by the power function equation via repeated extraction and dissolution experiments, with the dissolution rate following D4 > D1 ≈ D0. Furthermore, 4 mol/L sulfuric acid pre-activation resulted in the enrichment of HASF combined with organic matter and increased the slow-release rate of HASF silica. Thus, the synthesized HASF could have potential application prospects in soil improvement and fertilisation.

Synthesis of metakaolin-based geopolymer foamed materials using municipal solid waste incineration fly ash as a foaming agent

The existence of metallic aluminum in municipal solid waste incineration fly ash (MSWIFA) makes it challenging to recycle MSWIFA into cement materials because expansion occurs in the resultant matrices. Geopolymer-foamed materials (GFMs) are gaining attention in the field of porous materials due to their high-temperature stability, low thermal conductivity and low CO2 emission. This work aimed to utilize MSWIFA as a foaming agent to synthesize GFMs. The physical properties, pore structure, compressive strength and thermal conductivity were analyzed to assess different GFMs which were synthesized with various MSWIFA and stabilizing agent dosages. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analysis were conducted to characterize the phase transformation of the GFMs. Results showed that when MSWIFA content was increased from 20 to 50%, the porosity of GFMs increased from 63.5 to 73.7%, and bulk density decreased from 890 to 690 kg/m3. The addition of stabilizing agent could trap the foam, refine the cell size, and homogenize the cell size range. With the stabilizing agent increase from 0 to 4%, the porosity increased from 69.9 to 76.8%, and the bulk density decreased from 800 to 620 kg/m3. The thermal conductivity decreased with increasing MSWIFA from 20 to 50%, and stabilizing agent dosage from 0 to 4%. Compared with the collected data from references, a higher compressive strength can be obtained at the same level of thermal conductivity for GFMs synthesized with MSWIFA as a foaming agent. Additionally, the foaming effect of MSWIFA results from the H2 release. The addition of MSWIFA changed both the crystal phase and gel composition, whereas the stabilizing agent dosage had little impact on the phase composition.

Characterization of MSW incineration bottom ash for use as structural fill in reinforced soil structures: Geoenvironmental, geotechnical and economical assessment

The study presents the geoenvironmental and geotechnical characterization of MSW incineration bottom ash (IBA) and examines its reuse as structural fill in reinforced soil structures (RSS).The suitability of reuse has been assessed with regard to international regulatory standards. The prime focus of the work remains on evaluating the pullout response of geosynthetic reinforcements through IBA fill to determine the interaction coefficient, which has never been addressed in the literature. The economic viability of using IBA instead of locally available river sand for a 12 m high MSE wall is also established. The column leaching test results confirm that IBA can be utilized in RSS with suitable design measures. The geotechnical investigation shows that IBA is a well-graded, non-plastic lightweight material with adequate drainage and high shear strength. The pullout test results demonstrate that the interaction coefficient of polymeric strips and geogrid in IBA (0.73-1.53 and 0.79-1.91, respectively) is comparable or higher to materials conventionally used as structural fill in RSS, indicating adequate bondage between IBA and geosynthetic reinforcement. Further, it is estimated that using IBA as a substitute for available river sand in the vicinity can potentially reduce the overall RSS project cost by 15-20%, even if IBA has to be transported 50 km away from the project site.

Experimental study on the influence of curing conditions on the mechanical performance of municipal solid waste incinerated-bottom ash (MSWI-BA)

In this study, three groups of municipal solid waste incinerated-bottom ash (MSWI-BA) with different particle sizes (1.18-2.36 mm; 2.36-4.75 mm; 4.75-9.5 mm) were separately treated under natural dry, half-wet, and wet condition, to investigate the possibility of their mechanical performance. The strength of MSWI-BA was periodicity tested by crushing value test. The changes of microstructure and mineral components over curing time were separately analyzed via scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) and X-ray diffraction (XRD). The results show that the MSWI-BA requires long curing time to develop a certain strength, and the highest strength of MSWI-BA is obtained under half-wet curing condition. The strength development of MSWI-BA is attributed to the formation of hydration products of calcium silicate hydrate (C-S-H) and the increase in well-crystallized minerals of CaCO3. In addition, the results of the indoor long-term immersion test show that the heavy metal leached concentrations of MSWI-BA are far below the limited values in China standard GB 5085. In addition, the curing can solidify heavy metals to a certain extent, ensuring the safety of MSWI-BA as a road construction material.

Effect of chemical composition of coal ash used to prepare granulated coal ash on the removal of hydrogen sulfide from water

Granulated coal ash was prepared by mixing coal ash derived from a coal electric power plant and blast furnace cement, to remove hydrogen sulfide from aquatic environment. In this study, we investigate the effects of the composition of the coal ash used to prepare the granulated coal ash on its hydrogen sulfide removal performance. Manganese, magnesium, and calcium contents in the granulated coal ash were found to be the major factors in controlling the rate of hydrogen sulfide removal. The kinetics of hydrogen sulfide removal by the granulated coal ash were expressed as a first-order equation with a rate constant of 0.0081-0.080 h-1 . The rate constant for hydrogen sulfide removal obtained in this study correlated well with the manganese content in the granulated coal ash. The increasing surface pH attributed to the hydrolysis of calcium and magnesium on the surface of the granulated coal ash slightly increased the hydrogen sulfide removal rate. PRACTITIONER POINTS: Adsorbents for H2 S are prepared by coal ash from different coal blend and coal electric power generation processes. Adsorbents tested in this study could remove hydrogen sulfide effectively. Manganese oxide in the adsorbents enhanced the removal rate of hydrogen sulfide. Adsorbents tested in this study contribute to sustainable development goals in terms of coal fly ash recycling.

Development and optimization of geopolymer adsorbent for water treatment: Application of mixture design approach

The current paper refers to the study of a new approach to optimizing the adsorptive properties of geopolymers by varying the aluminosilicate precursors from kaolin (K), metakaolin (MK), and coal fly ash (CFA) as internal synthesis factors. The simplex-augmented-centroid mixture design was applied to identify the optimal formulation from the three aluminosilicate precursors to develop a geopolymer (GP) with a distinctive structure that positively affects its dye adsorption efficiency. The variously formulated GP samples were tested for the removal of both methylene blue (MB-dye) and crystal violet dye (CV-dye) from an aqueous solution. The mathematical-statistical analysis of the experimental readings suggested that the generated special cubic models were significant, and thus the chosen approach was adequate for determining the optimum blending proportion. The optimization tools indicated that the optimal mixture from the three aluminosilicate precursors for developing a GP with high adsorption efficiency was 58% MK, 42% K, and 0% CFA. The optimized geopolymer (GP_O) was synthesized and then analyzed using a variety of physicochemical techniques, which revealed the presence of an amorphous N-A-S-H gel-rich porous structure as an influencing property on the geopolymer's organic dye adsorption efficiency. The dependence of the adsorption mechanism of both MB-dye and CV-dye by GP_O on the adsorbent dosage, contact time, initial dye concentration, temperature, and solution pH was evaluated. The isothermic and kinetic experimental readings for MB and CV-dyes adsorption by GP_O were well fitted to the pseudo-second-order and Freundlich models, with an exothermic, favorable, and spontaneous adsorption reaction thermodynamically. The experimental studies in the lab scale on GP_O produce comparable results. From these results, it has been concluded that the accuracy and feasibility of the mixture design simulation succeeded in optimizing and developing a geopolymeric sorbent material with great potential as an excellent economical agent for removing cationic dyes from aqueous media. This point represents an added value compared to traditional non-optimized geopolymer absorbents. Besides, this geopolymer material represents a significant application possibility for water treatment and remediation of hazardous dye pollutants.

Green, non-toxic and efficient adsorbent from hazardous ash waste for the recovery of valuable metals and heavy metal removal from waste streams

As compared to alkali-activated geopolymers with phosphoric acid which may be used in high concentrations resulting in disposal concerns, acid-based geopolymers may have superior properties. A novel green method of converting waste ash to a geopolymer for use in adsorption applications such as water treatment is presented here. We use methanesulfonic acid, a green chemical with high acid strength and biodegradability to form geopolymers from coal and wood fly ashes. The geopolymer is characterized for its physico-chemical properties and tested for heavy metal adsorption. The material specifically adsorbs iron and lead. The geopolymer is coupled to activated carbon forming a composite, which adsorbs silver (precious metal) and manganese (hazardous metal) significantly. The adsorption pattern complies with pseudo-second order kinetics and Langmuir isotherm. Toxicity studies show while activated carbon is highly toxic, the geopolymer and the carbon-geopolymer composite have relatively less toxicity concerns.

Physical properties, chemical composition, and toxicity leaching of incineration fly ash by multistage water washing

Incineration fly ash contains a large amount of chloride, which limits the scope of its resource utilization. Water washing effectively removes chlorides and soluble substances, increasing the ability to dispose of them. The properties of incineration fly ash after multi-level water washing have been studied, providing theoretical guidance for the safe disposal of water-washed ash at all levels. Taking a practical project as an example, this paper analyzed the impact of three-stage countercurrent water washing on the physicochemical properties and toxicity leaching of incineration fly ash with different washing grades by XRD, BET, XRF, SEM, and ICP-MS. The results showed that with the improvement of washing grade, the removal rate of chloride ions was more than 86.96%. However, due to the removal of soluble substances, dioxins enriched from 98 ng-TEQ/kg of raw ash to 359 ng-TEQ/kg of tertiary washed incineration fly ash. Cr, Cu, and Zn also increased from 40.35 mg/L, 356.55 mg/L, and 3290.58 mg/L of raw ash to 136.30 mg/L, 685.75 mg/L, and 5157.88 mg/L, respectively. Pozzolanic activity had increased from 40.56% of the raw ash to 74.12% of the tertiary-washed incineration fly ash. There was no risk of excessive heavy metal leaching, and the dioxin content was lower than the raw ash in the primary washed incineration fly ash. After multi-stage water washing, incineration fly ash accumulated heavy metals, so more attention must be paid to the issue of heavy metal content in the safe disposal process.

Study on the proportion of paste filling materials based on fluorogypsum

A new type of paste filling material was created using fluorogypsum, a byproduct of hydrofluoric acid, as the raw material to address the issue of the filling material's high cost. The effects of five factors, including gangue, fly ash, fluorogypsum, lime content, and mass concentration on the physical and mechanical properties of filling material were also examined. In addition to analyzing slump and extension changes, the filler's mineral composition and microstructure were examined using SEM and XRD examinations. The results show that the best ratio of the developed filling material was 1000g coal gangue, 300g fly ash, 300g fluorogypsum, and 50g lime and mass concentration is 78%, and its compressive strength can reach 4-5MPa at 28 days. Raw materials such as gangue and fly ash will have a certain influence on the mechanical properties of the filling material. The hydration products of the developed filling material prepared by XRD and SEM were ettringite, calcium sulfate dihydrate, and calcium silicate hydrate gel. The new fluorogypsum-based paste filling material can be used to consolidate loose rock strata and fill goaf. It solves the problem of disposal of industrial waste fluoropgypsum and also solves the problem of coal mine gangue stacking, which has a far-reaching influence on ecological environment management.

Investigation of mineral commodity residues based on alkalinity, solubility and other physicochemical aspects aiming the management of amazonian acidic soils

The large amounts of mineral residues generated by the bauxite-alumina industries in the Amazon - with a production scale in the same order of magnitude as their source commodities - have been seen as new sources of raw materials (secondary mines) and/or an inseparable part of a sustainable production system, i.e., a source for the generation of co-products within a circular economy system. In the present study, two alkaline residues from this mining-metallurgical industry were assessed for their potential to amend productive acidic Amazonian soils, namely, (1) insoluble solid residue from the Bayer process (bauxite residue, BR) and (2) ash from energy production from coal (coal combustion residues, CCRs: fly ash, FA, and bottom ash, BA). A physicochemical investigation was performed to evaluate the possible benefits that these residues can offer to the soil‒plant system. The alkalinity of the residues was adjusted "to a value of pH 8-10" by leaching with H₃PO₄ using a central composite experimental design. The chemical analyses indicated high levels (total and soluble) of essential elements such as Ca and S in the CCRs. All residues showed a high cation exchange capacity (CEC). Regarding the water holding capacity (WHC), FA showed a higher value than the other residues (68.6%). After pH adjustment, available P increased significantly for all residues, and the Ca and S contents remained high for the CCRs, while in BR, there was a decrease in available Na, and aluminum (Al³⁺) was not available because the potential acidity (H + Al) < 0.6. Finally, complementary analyses showed that with respect to mineralogy, BR is composed mainly of iron oxyhydroxides and aluminosilicate phases, while carbonate, sulfide and silicate phases dominate the CCRs. The neutralizing character, the presence of nutrients in the CCRs and the unavailability of Al³⁺ in BR are positive physicochemical characteristics for the management of Amazonian acid soils; the use of this residues would add to the circular economy and sustainability of the Amazon.

Distribution characteristics and ecological risks of heavy metals in bottom ash, fly ash, and particulate matter released from municipal solid waste incinerators in northern Vietnam

Residue concentrations of heavy metals, including As, Cd, Cr, Cu, Ni, Pb, and Zn, were determined in bottom ash, fly ash, and particulate matter (PM₁₀) samples collected from five municipal incinerators in northern Vietnam to assess their occurrence, distribution characteristics, and potential risks. Concentrations and profiles of heavy metals are presented, showing the dominance of Zn in all types of samples. Highly volatile elements (Cd, Pb, and Zn) were found at elevated proportions in PM₁₀ but not fly ash. The large difference in the heavy metal profiles could be explained by the variation of input raw materials, the absence of an appropriate cycle for the material feeding process, and post-combustion technology applied. Mass balance of heavy metals in the bottom ash, fly ash, and PM₁₀ varied significantly between the investigated incinerators, largely due to the difference in incineration technology and air pollution control system. Emission factors and annual emissions were also estimated, indicating the highest value and amount in bottom ash, followed by PM₁₀ and fly ash. Our results are among the first studies reporting contents and emissions of toxic elements in incinerated solid wastes in Vietnam.

An innovative methodological path to attribute the hazard property HP14 "ecotoxic" to waste using a weight of evidence approach

The criteria for the application of hazard property code HP14 "ecotoxicity" to waste assessment have been defined by the Council Regulation (EU) 2017/997. However, on the basis of available methodologies, its application may present some issues. Those can be referred to the preparation and representativeness of the sample to be analyzed, to the chemical evaluation by the summation method (CLP Regulation), to the toxicity thresholds of ecotoxicological tests and the evaluation of the real environmental impact of waste. In this work an integrated chemical and ecotoxicological approach, that relies on modified synthetic indices previously developed for dredging sediment management is proposed. The methodological procedure, assuming that the eluate represents the most relevant carrier of contaminant into the environment, was applied on eluates extracted from samples of 3 kinds of waste categories (car-fluff, fly-ash and sludges), introducing changes starting from the sample preparation and the targeted ecotoxicological and chemical analyses. The application of this approach allowed qualifying the sludge and part of fly-ash samples as "non ecotoxic", unlike the conventional method (CLP) under which all waste categories considered were found to be "ecotoxic". The new pathway for waste qualification, abandoning the classical tabular approach based on mere chemical concentrations and/or predetermined thresholds of toxicity (principle of the worst case), showed a greater discriminatory power among samples with different characteristics, and a more realistic and quantitative assessment of the environmental impact which can be caused by leaching of the waste.

Radioactivity of residues from waste incineration facilities in Finland

Waste incineration in Europe has been increasing in the past few decades as there is a need to reduce the burden on landfills and their associated environmental concerns. While incineration reduces the volume of the waste, the volume of slag and ash is still substantial. To find out potential radiation risks that incineration residues could set to workers or the public, the levels of radioactive elements in these residues were investigated from nine waste incineration plants in Finland. Natural and artificial radionuclides were detected in the residues, but in general the activity concentrations were low. This study shows that the level of Cs-137 in the fly ash from municipal waste incineration follows the pattern of 1986 fallout zones in Finland, although the levels are significantly lower than in ash from bioenergy production from the same areas. Am-241 was also detected in many samples, although the activity concentrations were very low. Based on the findings in this study, the typical ash and slag residues from municipal waste incineration do not need radiation protection measures for workers or the public even in regions that received up to 80 kBq m^-2of Cs-137 fallout in 1986. The further use of these residues need not be restricted due to radioactivity. Hazardous waste incineration residues and other special cases need to be considered separately, depending on the original waste composition.

Green Approach for Rare Earth Element (REE) Recovery from Coal Fly Ash

Due to the growing demands of rare earth elements (REEs) and the vulnerability of REEs to potential supply disruption, there have been increasing interests in recovering REEs from waste streams such as coal fly ash (CFA). Meanwhile, CFA as a large industrial waste stream in the United States (U.S.) poses significant environmental and economic burdens. Recovery of REEs from CFA is a promising solution to the REE scarcity issue and also brings opportunities for CFA management. This study demonstrates a green system for REE recovery from Class F and C CFA that consists of three modules: REE leaching using citrate, REE separation and concentration using oxalate, and zeolite synthesis using secondary wastes from Modules I and II. In Module I, ∼10 and 60% REEs were leached from the Class F and C CFA samples, respectively, using citrate at pH 4. In Module II, the addition of oxalate selectively precipitated and concentrated REEs from the leachate via the formation of weddellite (CaC₂O₄·2H₂O), while other trace metals remained in solution. In Module III, zeolite was synthesized using wastes from Modules I and II. This study is characterized by the successful recovery of REEs and upcycling of secondary wastes, which addresses both REE recovery and CFA management challenges.

Study on properties of sewage sludge cemented paste backfill and leaching mechanism of heavy metals

In order to achieve sustainable development and control environmental pollution, this paper proposes sewage sludge (SS) as an auxiliary cementitious material, which is mixed with ordinary Portland cement (OPC), fly ash (FA), and gangue to produce sewage sludge cemented paste backfill (SS-CPB) material. The fluidity and mechanical properties of backfill materials with different SS contents and the heavy metal leaching mechanism of SS-CPB are investigated. The results reveal that (1) with the increase of SS content from 10 to 30%, the slump of fresh SS-CPB mortar decreased from 21.7 to 18.2 cm, the initial setting time decreased from 2.83 to 0.58 h, and the final setting time decreased from 4.92 to 0.83 h. (2) Compared with the control group, the 3-day unconfined compressive strength (UCS) of the SS-CPB mixed with 10% SS increased by 49.5%, and the UCS decreased slightly in the later stage, but it also met the actual needs of coal mines. (3) Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy were used to study the SS-CPB samples. It was found that the free Al³⁺ in SS promoted the formation of ettringite (AFt), provided part of the early UCS, and accelerated the setting time. (4) The leaching rule of heavy metal ions was analyzed in combination with leaching kinetics, and the change of heavy metal ion mass concentration in the rising stage was in line with the contraction core model controlled by diffusion.

Adsorption of hydrogen sulfide by iron-based adsorbent derived from fly ash and iron slag

In this article, an innovative sorbent (Fe-FA) is prepared from fly ash; ferrous sulfate-containing waste slag (FSS), which are industrial wastes; and NaOH by a hydrothermal method at 100 °C. As a result, in comparison to several conventional sorbents, such as ZnO, Fe₂O₃, 13X zeolite, and activated carbon, Fe-FA had the best adsorption performance for H₂S adsorption. Fe-FA had not only a higher adsorption capacity (near 150 mg/g) but also a longer breakthrough time (near 400 min) when gas hourly space velocity was 8000 h^-1. Then, characterizations of XRD, BET, NH₃-TPD, FTIR, and XPS analyzed basic properties of Fe-FA and revealed reasons for the excellent adsorption performance. In general, the excellent adsorption performance of Fe-FA for H₂S is mainly due to the high content of iron species (almost 50%) and suitable mesoporous structure in the Fe-FA.

Physicochemical and pozzolanic properties of municipal solid waste incineration fly ash with different pretreatments

Swelling caused by gas generated from municipal solid waste incineration fly ash (MSWIFA) when it is mixed with alkali limits its uses. Besides, the leaching of anion salts and heavy metals contained in MSWIFA poses a high risk to environment. This study presents the feasibility of a one-step alkaline washing, one-step thermal quenching and two-step combination of alkaline washing and thermal quenching pretreatment methods in altering the key properties of MSWIFA for promoting its reusability. It was found that apart from H₂(gas), NH₃(gas) was also generated during the alkaline washing of the MSWIFA. Besides, pretreatments led to the reduction in particle size, the increase in pore volume and specific surface area of the MSWIFA, as well as the removal of chloride and sulfate anions. All the pretreatment methods were effective in reducing leaching of heavy metals to below levels of nonhazardous waste except Cd and Pb with alkaline washing. Furthermore, both the chemical Frattini test and the mechanical activity index test showed improvement in pozzolanic activities of the MSWIFA after the pretreatments. Overall, the combined pretreatment method was most effective in eliminating gas emission, and reducing leaching of metal ions and anions from the ash, while enhancing the pozzolanic activity of the ash.

Application of aluminum oxide nanoparticles in asphalt cement toward non-polluted green environment using linear regression

In order to decrease the greenhouse gas emissions generated by regular Portland cement (OPC), additional cementitious ingredients have been frequently employed, even while building road bases. OPC's susceptibility to moisture and lack of flexibility make it ineffective for stabilizing road bases. This research used alkali-activated materials (AAM) with fly ash to investigate the mechanical properties of cold asphalt binder (freeze-thaw cycles) including the compressive, flexural strength, workability and porosity of cement. Dry specimens and specimens in distilled water have both been used in the experiments to study these temperature correlations. One sample was tested at 20 °C, and the other was frozen and thawed five times at a temperature of -5 °C (cold region environment). The resulting mixtures' morphologies and microstructures were analyzed via SEM images. During the 7 to 28-day curing period, the mixture's growth ratio rose. The combination registered both the greatest and lowest robust elastic modulus. The total compressive strength of the material decreased as the water-to-cement ratio increased due to the greater amount of free water accessible with a higher cationic asphalt emulsion (CAE) content. The moderate loss of flexural strength with increasing CAE concentration after 7 and 28 days of curing was seen. There is not a major impact on flexural strength in the materials by looking at the very modest gaps in flexural strength between 7 and 28 days curing periods. Due to the particle shape and size of this precursor, FA's inclusion allowed for a lower water to binder rate while maintaining a similar level of workability. The porosity and water absorption values rose with FA substitutions. Further studies might clarify the lower flexural strength observed in this study by adding other hybrids plus fly ash such as lime or nanoparticles.

Adsorption performance of phosphate in water by mixed precursor base geopolymers

Design of low-cost and high-removal efficiency phosphate adsorbents is of great significance for the control of eutrophication. In this study, fly ash and metakaolin were used as raw materials to evaluate the capability of phosphate adsorption and to investigate the mechanism of phosphate adsorption. The results of comparing the adsorption effect of geopolymers prepared with different modulus of alkali activator showed that the removal efficiency of phosphate in water at 0.8 M was on average 30.33% higher than 1.2 M. Therefore, FA + MK-0.8 had the maximum removal efficiency of 94.21% for phosphate in water with the maximum adsorption capacity of 36.02 mg/kg. In addition, the adsorption of phosphate could be well fitted by pseudo-second-order model and the process was mainly controlled by film diffusion. The alkali activation process can destroy the octahedral structure of the raw material, so the geopolymer are mainly tetrahedral in structure. Interestingly, new zeolite structures were formed in the mineral crystal phase of FA + MK-0.8, which may facilitate the adsorption of phosphate by geopolymers. Furthermore, the combined FTIR and XRD analysis results indicated that the underlying mechanisms of phosphate adsorption were electrostatic gravitation, ligand exchange, and surface complexation. This research not only synthesizes low-cost and high removal efficiency wastewater purification materials, but also provides a promising application for the elimination and resource utilization of industrial solid waste.

Footprints in compositions, PCDD/Fs and heavy metals in medical waste fly ash: Large-scale evidence from 17 medical waste thermochemical disposal facilities across China

Chemical compositions, polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) profiles and heavy metals (HMs) leachability of medical waste fly ash (MWFA) from 17 thermochemical treatment facilities in eight Chinese provinces were first investigated. Large-scale and extended monitoring revealed high chloride and Zn contents and similar PCDD/Fs congener profiles in MWFA. Particularly, the PCDD/Fs and HMs concentrations implied greater toxicity than that observed for municipal solid waste incinerator fly ash (MSWIFA). The maximum international toxic equivalent value of PCDD/Fs in MWFA was 40 times that of MSWIFA, and the leaching concentrations of Zn and Hg were 15 and 4 times those of MSWIFA, respectively. Notably, MWFA characteristics suggest the possibility of recycling and sustainable disposal solutions owing to the high Cl and Zn content with good recovery instead of landfill disposal. Similarities in chemical composition, PCDD/Fs homolog distribution, and water-solubility of chloride salts allows co-processing of MWFA and MSWIFA via water-washing detoxification and thermal treatment, such as that used in cement kilns. This study supplements existing literature on the characteristics and risk management of MWFA.

Water washing and acid washing of gasification fly ash from municipal solid waste: Heavy metal behavior and characterization of residues

Gasification fly ash (GFA) is a hazardous solid residue generated in the slagging-gasification of municipal solid waste (MSW). GFA contains higher amounts of heavy metals such as Pb and Zn than incineration fly ash (IFA), which increases the difficulty of heavy metal immobilization but simultaneously makes it a potential feedstock for metal recovery. Water washing and acid washing are conventional and economic methods to treat wastes with high heavy metal and chloride contents. However, the research on the effects of such methods in treating GFA is still blank. Hence, in this study, water washing and acid washing of GFA were investigated in detail. Heavy metal behaviors at different time points during the washing processes were studied in a wide pH range and comprehensive characterizations of washed GFAs were also conducted. The results show that different re-precipitates could be identified in washed GFAs depending on different pH conditions. After water washing for 24 h, more than 60% of Zn in GFA would dissolve and re-precipitate into calcium zincate. It is also revealed that the precipitation effect could in turn influence the pH during the washing process. After acid washing with a low-concentration acid, heavy metal leachabilities were found reduced due to the pH and precipitation effect. High-concentration acid washing could effectively extract Zn and Cd with extraction ratios exceeding 90%. Applying 1.2 M-HCl washing, a short washing period of 15 min could realize a Pb extraction ratio of 81.2%, much higher than 53.2% when extending the washing period to 24 h.

Retention of trace elements in coal-fired flue gas by a novel heterogeneous agglomeration technology

Heterogeneous agglomeration (HA) is a very potential technology for coal-fired flue gas treatment. In this paper, the distribution and migration mechanisms of trace elements (TEs) such as Se, As and Pb in CFPPs were studied on a 30,000 m³/hr pilot-scale experimental platform. The influences of HA on the removal efficiency of gaseous and particulate TEs were well analyzed. The results showed that Se, As and Pb were enriched in fly ash, and their sensitivity to particle size is quite different. The content of Se was the highest in PM₁, reaching 193.04 mg/kg at the electrostatic precipitator (ESP) outlet. The average particle size of the total dust before ESP increased significantly from 21.686 to 62.612 µm after injecting the heterogeneous agglomeration adsorbent, conducive to its further removal by ESP. In addition, the concentrations of gaseous Se, As and Pb in the flue gas decreased after adsorbent spray, and accordingly, their contents in the hierarchical particles increased, indicating that the adsorbent could effectively promote the adsorption of gaseous trace elements in fly ash and reduce the possibility of their escape to the atmosphere. Total concentrations of Se, As and Pb emitted by wet flue gas desulfurization (WFGD) are 0.223, 0.668 and 0.076 µg/m³, which decreased by 59.98%, 47.69% and 90.71%, respectively. Finally, a possible HA mechanism model was proposed, where chemical adsorption, physical condensation and collision agglomeration of gaseous TEs and fine particles with adsorbent droplets occurred to form larger agglomerates.