Application of novel metal organic framework-deep eutectic solvent/molecularly imprinted polymer multiple monolithic fiber for solid phase microextraction of amphetamines and modafinil in unauthorized medicinal supplements with GC-MS

The goal of this research is the development of multiple monolithic fiber-solid phase microextraction (MMF-SPME) using a new integrated fiber for the determination of amphetamine derivatives and modafinil from unauthorized medicinal supplements. For this purpose, a monolithic fiber of metal organic framework MIL-Al (53)-deep eutectic solvent (DES)/molecularly imprinted polymers (MOF-DES/MIP) was synthesized. To find optimum microextraction conditions gas chromatography-mass spectrometer (GC-MS) was used and the influences of effective variables were investigated using one factor at a time method. After that, the significant variables were optimized using a Box-Behnken design (BBD) combined with a desirability function (DF). Under optimized conditions (desorption solvent=1500 µL of 1-octanol, pH=3.5, extraction time=35 min, [NaCl]=0% w/v and stirring rate=600 rpm), calibration graphs of analytes were linear in a concentration range of 0.1-400 μg L-1 with correlation coefficients > 0.9966. Limits of detection and quantification were in the ranges of 0.023-0.033 μg L-1 and 0.088-0.113 μg L-1, respectively. This procedure was successfully employed in determining target analytes in spiked and unspiked unauthorized medicinal supplement samples with recoveries ranging from 95.14 to 104.63%.

Detection of Maize Mold Based on a Nanocomposite Colorimetric Sensor Array under Different Substrates

This study developed a novel nanocomposite colorimetric sensor array (CSA) to distinguish between fresh and moldy maize. First, the headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC/MS) method was used to analyze volatile organic compounds (VOCs) in fresh and moldy maize samples. Then, principal component analysis and orthogonal partial least-squares discriminant analysis (OPLS-DA) were used to identify 2-methylbutyric acid and undecane as key VOCs associated with moldy maize. Furthermore, colorimetric sensitive dyes modified with different nanoparticles were employed to enhance the dye properties used in the nanocomposite CSA analysis of key VOCs. This study focused on synthesizing four types of nanoparticles: polystyrene acrylic (PSA), porous silica nanospheres (PSNs), zeolitic imidazolate framework-8 (ZIF-8), and ZIF-8 after etching. Additionally, three types of substrates, qualitative filter paper, polyvinylidene fluoride film, and thin-layer chromatography silica gel, were comparatively used to fabricate nanocomposite CSA combining with linear discriminant analysis (LDA) and K-nearest neighbor (KNN) models for real sample detection. All moldy maize samples were correctly identified and prepared to characterize the properties of the CSA. Through initial testing and nanoenhancement of the chosen dyes, four nanocomposite colorimetric sensitive dyes were confirmed. The accuracy rates for LDA and KNN models in this study reached 100%. This work shows great potential for grain quality control using CSA methods.

Innovative Solid-Phase Extraction Strategies for Improving the Advanced Chromatographic Determination of Drugs in Challenging Biological Samples

In the past few decades, considerable scientific strides have been made in the subject of drug analysis in human biological samples. However, the risk caused by incorrect drug plasma levels in patients still remains an important concern. This review paper attempts to investigate the advances made over the last ten years in common sample preparation techniques (SPT) for biological samples based on solid sorbents, including solid-phase extraction (SPE) and solid-phase micro-extraction (SPME), and in particular in the field of molecularly imprinted polymers (MIPs), including non-stimuli-responsive and stimuli-responsive adsorbents. This class of materials is known as 'smart adsorbents', exhibiting tailored responses to various stimuli such as magnetic fields, pH, temperature, and light. Details are provided on how these advanced SPT are changing the landscape of modern drug analysis in their coupling with liquid chromatography-mass spectrometry (LC-MS) analytical techniques, a general term that includes high-performance liquid chromatography (HPLC) and ultra-high performance liquid chromatography (UHPLC), as well as any variation of MS, such as tandem (MS/MS), multiple-stage (MSn), and high-resolution (HRMS) mass spectrometry. Some notes are also provided on coupling with less-performing techniques, such as high-performance liquid chromatography with ultraviolet (HPLC-UV) and diode array detection (HPLC-DAD) detection. Finally, we provide a general review of the difficulties and benefits of the proposed approaches and the future prospects of this research area.

High-sensitive determination of tetracycline antibiotics adsorbed on microplastics in mariculture water using pre-COF/monolith composite-based in-tube solid phase microextraction on-line coupled to HPLC-MS/MS

Microplastics (MPs) act as carriers for organic pollutants (e.g. antibiotics) and microorganisms (e.g. bacteria) in waters, leading to the proliferation of antibiotic resistance genes. Moreover, the antibiotics adsorbed on MPs may exacerbate this process. For further research, it is necessary to understand the types and amounts of antibiotics adsorbed on MPs. However, due to the heavy work of MPs collection and sample pretreatment, there is a lack of analytical methods and relevant data. In this study, an in-tube solid phase microextraction (IT-SPME) on-line coupled to HPLC-MS/MS method based on amorphous precursor polymer of three-dimensional covalent organic frameworks/monolith-based composite adsorbent was developed, which could efficiently capture, enrich and analyze tetracycline (TCs) antibiotics. Under the optimal extraction parameters, the developed method was capable of detecting TCs at levels as low as 0.48-1.76 pg. This method was applied to analyze the TCs adsorbed on MPs of different particle sizes in mariculture water for the first time, requiring a minimum amount of MPs of only 1 mg. Furthermore, it was observed that there could be an antagonistic relationship between algal biofilm and TCs loaded on MPs. This approach could open up new possibilities for analyzing pollutants on MPs and support deeper research on MPs.

Superior high-efficiency and high-throughput volatile flavor extraction of Japanese fermented seasonings by solvent-assisted stir bar solid extraction with reverse extraction

Fermented seasonings have pleasant flavors that stimulate our appetite. Their flavoring properties change depending on factors such as their materials and fermented conditions. Therefore, a comparative analysis of their flavor is important when evaluating their quality. However, seasonings contain high levels of various matrices such as sugars, proteins, lipids, and ethanol, making it difficult to extract aroma compounds efficiently from them. In this study, we verified a high-efficient and high-throughput volatile flavor analysis of fermented seasonings by solvent-assisted stir bar solid extraction (SA-SBSE) with reverse extraction. We applied SA-SBSE to Japanese fermented seasonings, soy sauce, miso (fermented beans), and mirin (sweet rice wine) and compared their profiles with those from other common extraction methods, headspace gas-solid-phase microextraction (HS-SPME), liquid extraction with solvent-assisted flavor evaporation (LE-SAFE), and conventional SBSE (C-SBSE). The aroma properties and profiles of extracts from SA-SBSE were close to those of the original sample, being similar to that of LE-SAFE. In addition, potent aroma compounds in each sample were extracted by SA-SBSE and LE-SAFE, which were far superior to those by C-SBSE. For quantification, SA-SBSE extracts showed a good standard curve by the standard addition method. We could quantify maltol, one of the most common potent aroma compounds in all samples, for various commercial samples by such high-throughput analysis.

Automated sequential SPME addressing the displacement effect in food samples

The displacement effect can be an issue for the quantitation of analytes with low affinity towards the extraction phase in solid-phase microextraction (SPME) for food samples that have low level of binding matrix or high level of hydrophobic compounds. In this communication, automated sequential SPME-GC-MS strategy was developed for addressing the displacement issue. The SPME thin film with PDMS coating was firstly used for the extraction of hydrophobic components in the sample which cause displacement and then SPME fiber with DVB/CAR/PDMS coating was applied in the second step for the extraction of the remain compounds. This new strategy was investigated by using 10 key food odorants as target analytes and tested in commercial beer samples. The results suggested that sequential SPME can decrease the displacement effect and improve the extraction efficiency for polar analytes.

Application of non-lethal bioSPME-LC-MS/MS for the detection of human pharmaceuticals in soft corals: A survey at the North Nilandhe atoll (Maldives)

At present the information regarding the occurrence of human pharmaceuticals (PhaCs) in coral reefs and their potential impacts on the associated fauna is limited. To optimize the collection of data in these delicate environments, we employed a solid-phase microextraction (bioSPME) and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) procedure that enabled in vivo determinations in soft corals. Specifically, we researched the antibiotics Ofloxacin Sulfamethoxazole and Clarithromycin, the anti-inflammatory Diclofenac Propyphenazone Ketoprofen and Amisulpride, the neuroactive compounds Gabapentin-lactam, the beta-blocker Metoprolol and the antiepileptic Carbamazepine. Reproducibility was between 2.1% and 9.9% and method detection limits LODs) were between 0.2 and 1.6 ng/g and LOQs between 0.8 and 5.4 mg/g. The method was then applied to establish a baseline for the occurrence of these compounds in the Maldivian archipelago. Colonies of Sarcophyton sp. and Sinularia sp. were sampled along an inner-outer reef transect. Five of the ten targeted PhaCs were identified, and 40% of the surveyed coral colonies showed the occurrence of at least one of the selected compounds. The highest concentrations were found inside the atoll rim. Oxoflacin (9.5 ± 3.9 ng/g) and Ketoprofen (4.5 ± 2.3 ng/g) were the compounds with the highest average concentrations. Outside the atoll rim, only one sample showed contamination levels above the detection limit. No significant differences were highlighted among the two surveyed soft coral species, both in terms of average concentrations and bioconcentration factors (BCFs).

Post-synthetic modification of covalent organic framework for efficient adsorption of organochlorine pesticides from cattle's milk

Analysis of organochlorine pesticides (OCPs) residues in milk faces a significant challenge. Herein, a sea urchin structured covalent organic framework bearing boric acid groups named COF-B(OH)2 was synthesized and applied as a coating material for solid-phase microextraction (SPME) of the OCPs in cattle's milk. Its performance was superior to that of three commonly used commercial SPME fibers, which could be due to the coexistence of hydrogen bonding, halogen bonding, π-stacking and electrostatic interactions. Besides, the fiber coating displayed good stability and reusability. After optimization, a COF-B(OH)2 based SPME coupled with gas chromatography-electron capture detection was established for the sensitive detection of the OCPs from milk samples. The limits of detection (S/N = 3) were between 0.04 and 1.00 μg kg-1. Satisfactory accuracy was achieved with the method recoveries in the range of 87.5 % to 112.5 %. These results manifest the feasibility of the COF-B(OH)2 coated fiber for the enrichment of the trace OCPs from milk samples.

Monitoring the dynamic changes in aroma during the whole processing of Qingzhuan tea at an industrial scale: From fresh leaves to finished tea

Aroma is one of the most outstanding quality characteristics of Qingzhuan tea (QZT), but its formation is still unclear. Thus, the volatile organic compounds (VOCs) during the whole processing of QZT were investigated by headspace solid-phase microextraction/gas chromatography-mass spectrometry. Based on 144 identified VOCs, the results showed that de-enzyming, sun-drying, and piling fermentation were the key processes of QZT aroma formation. Furtherly, 42 differential VOCs (VIP > 1.0 and p < 0.05) and 16 key VOCs (rOAV > 1.0 and/or ROAV > 1.0) were screened. Especially, sulcatone and β-ionone (rOAV > 100 and ROAV > 10) were considered the most important contributors to the aroma of QZT. The metabolisms of key VOCs were mainly involved in oxidative degradation of fatty acids, degradation of carotenoids, and methylation of gallic acid. This study could help to more comprehensively understand the aroma formation in QZT processing at an industrial scale.

Quantifying exhaled acetone and isoprene through solid phase microextraction and gas chromatography-mass spectrometry

BACKGROUND

Acetone, isoprene, and other volatile organic compounds (VOCs) in exhaled breath have been shown to be biomarkers for many medical conditions. Researchers use different techniques for VOC detection, including solid phase microextraction (SPME), to preconcentrate volatile analytes prior to instrumental analysis by gas chromatography-mass spectrometry (GC-MS). These techniques include a previously developed method to detect VOCs in breath directly using SPME, but it is uncommon for studies to quantify exhaled volatiles because it can be time consuming due to the need of many external/internal standards, and there is no standardized or widely accepted method. The objective of this study was to develop an accessible method to quantify acetone and isoprene in breath by SPME GC-MS.

RESULTS

A system was developed to mimic human exhalation and expose VOCs to a SPME fiber in the gas phase at known concentrations. VOCs were bubbled/diluted with dry air at a fixed flow rate, duration, and volume that was comparable to a previously developed breath sampling method. Identification of acetone and isoprene through GC-MS was verified using standards and observing overlaps in chromatographic retention/mass spectral fragmentation. Calibration curves were developed for these two analytes, which showed a high degree of linear correlation. Acetone and isoprene displayed limits of detection/quantification equal to 12 ppb/37 ppb and 73 ppb/222 ppb respectively. Quantification results in healthy breath samples (n = 15) showed acetone concentrations spanned between 71 ppb and 294 ppb, and isoprene varied between 170 ppb and 990 ppb. Both concentration ranges for acetone and isoprene in this study overlap with those reported in existing literature.

SIGNIFICANCE

Results indicate the development of a system to quantify acetone and isoprene in breath that can be adapted to diverse sampling methods and instrumental analyses beyond SPME GC-MS.

Polyaniline-coated kapok fibers for convenient in-syringe solid-phase microextraction and determination of organochlorine and pyrethroid pesticide residues in aqueous samples

Pesticides used in agriculture have low polarity and a tendency to accumulate in fatty tissues, posing potential risks to human health. Effective pre-treatment is crucial due to complex sample matrices and low concentrations of pesticide residues typically encountered in instrument analysis. In this study, polyaniline-coated kapok fiber (PANI-KF) was synthesized successfully using in-situ oxidative polymerization for use as sorbents in in-syringe SPME of pyrethroid pesticides (PYRs) and organochlorine pesticides (OCPs) from aqueous samples. Coating the natural KF with PANI maintained the hollow microtubular structure and fiber morphology while significantly enhancing the extraction efficiency. The extraction process was easily conducted by simply pulling and pushing the syringe plunger. The entire extraction process, utilizing 3 mg of PANI-KF, could be completed in approximately 3 min. Density functional theory results indicated that the adsorption mechanism of PANI-KF towards OCPs and PYRs mainly involved van der Waals interactions, π-π interactions, and weak hydrogen bonding interactions. With the coupling of gas chromatography-mass spectrometry, a quantification method was established that exhibited good linearities (R2 > 0.990), and relative recoveries (87.2-108.5 %). The limits of detection ranged from 0.4 to 2.0 ng mL-1 and the matrix effects were negligible (-12.3-16.4 %). The validated in-syringe SPME-GC-MS method was successfully applied to determine pesticide residues in fruit juices, oral liquids and herbal extract granules with satisfactory accuracy and precision. PANI-KF exhibits remarkable promise as a sorbent for the extraction and enrichment of pesticide residues in aqueous samples, thereby contributing to the advancement of pesticide residue determination methodologies.

Rapid screening of acetylcholinesterase active contaminants in water: A solid phase microextraction-based ligand fishing approach

Effect-directed analysis (EDA) has been increasingly used for screening toxic contaminants in the environment, but conventional EDA procedures are often time-consuming and labor-extensive. This challenges the use of EDA for toxicant identification in the scenarios when quick answers are demanded. Herein, a solid phase microextraction ligand fishing (SPME-LF) strategy has been proposed as a rapid EDA approach for identifying acetylcholinesterase (AChE) active compounds in water. The feasibility of ligand fishing techniques for screening AChE active chemicals from environmental mixtures was first verified by a membrane separation method. Then, SPME fibers were prepared through self-assembly of boronic acid groups with AChE via co-bonding and applied for SPME-LF. As AChE coated SPME fibers selectively enriched AChE-active compounds from water, comparing sorbing compounds by the SPME fibers with and without AChE coating can quickly distinguish AChE toxicants in mixtures. Compared with conventional EDA, SPME-LF does not require repeating sample separations and bioassays, endowing SPME-LF with the merits of low-cost, labor-saving, and user-friendly. It is believed that cost-efficient and easy-to-use SPME-LF strategy can potentially be a rapid EDA method for screening receptor-specific toxicants in aquatic environment, especially applicable in time-sensitive screening.

Vortex-assisted dispersive micro-solid-phase extraction using silica-supported Fe2O3-modified khat (Catha edulis) biochar nanocomposite followed by GC-MS for the determination of organochlorine pesticides in juice samples

In this paper, dispersive micro-solid phase extraction technique was developed for the purpose of extracting and preconcentrating organochlorine pesticide residues in juice samples before their separation and quantitative analysis by gas chromatography-mass spectrometry. A sorbent composed of a silica-supported Fe2O3-modified khat leftover biochar nanocomposite (SiO2-Fe2O3-KLBNC) was implemented in the process. To improve the dispersion of the sorbent in the solution, vortex mixer was employed. Experimental parameters influencing the performance of the method were optimized, and the optimal conditions were established. With these conditions, linear dynamic ranges ranged from 0.003 to 100.0 ng/mL were achieved, with a correlation coefficient (r2) ≥ 0.9981. The limits of detection and quantification, determined by signal-to-noise ratios of 3 and 10, respectively, were found to be in the ranges of 0.001-0.006 ng/mL and 0.003-0.020 ng/mL. Intra- and inter-day precision, values ranging from 0.3-4.8% and 1.7-5.2% were obtained, respectively. The matrix-matched extraction recoveries demonstrated favorable outcomes, falling within the range of 83.4-108.3%. The utilization of khat leftover as an adsorbent in contemporary sample preparation methodologies offers a cost-effective alternative to the currently available, yet expensive, adsorbents. This renders it economically viable, particularly in resource-constrained regions, and is anticipated to witness widespread adoption in the coming future.

Porous covalent organic framework nanofibrous membrane for excellent enrichment and ultra-high sensitivity detection of trace organochlorine pesticides in water

Developing adsorbents with high performance and long service life for effective extracting the trace organochlorine pesticides (OCPs) from real water is attracting numerous attentions. Herein, a self-standing covalent organic framework (COF-TpPa) membrane with fiber morphology was successfully synthesized by using electrospun nanofiber membranes as template and employed as solid-phase microextraction (SPME) coating for ultra-high sensitivity extraction and analysis of trace OCPs in water. The as-synthesized COF-TpPa membrane exhibited a high specific surface area (800.83 m2 g-1), stable nanofibrous structure, and excellent chemical and thermal stability. Based on the COF-TpPa membrane, a new SPME analytical method in conjunction with gas chromatography-mass spectrometry (GC-MS) was established. This proposed method possessed favorable linearity in concentration of 0.05-2000 ng L-1, high sensitivity with enrichment factors ranging from 2175 to 5846, low limits of detection (0.001-0.150 ng L-1), satisfactory precision (RSD < 10 %), and excellent repeatability (>150 cycles), which was better than most of the reported works. Additionally, the density functional theory (DFT) calculations and XPS results demonstrated that the outstanding enrichment performance of the COF-TpPa membrane was owing to synergistic effect of π-π stacking effects, high specific surface area and hydrogen bonding. This work will expect to extend the applications of COF membrane to captures trace organic pollutants in complex environmental water, as well as offer a multiscale interpretation for the design of effective adsorbents.

In situ fabrication of covalent organic frameworks on solid-phase microextraction probes coupled with electrospray ionization mass spectrometry for enrichment and determination of androgens in biosamples

Solid-phase microextraction (SPME) coupled with electrospray ionization mass spectrometry (ESI-MS) was developed for rapid and sensitive determination of endogenous androgens. The SPME probe is coated with covalent organic frameworks (COFs) synthesized by reacting 1,3,5-tri(4-aminophenyl)benzene (TPB) with 2,5-dioctyloxybenzaldehyde (C8PDA). This COFs-SPME probe offers several advantages, including enhanced extraction efficiency and stability. The analytical method exhibited wide linearity (0.1-100.0 µg L-1), low limits of detection (0.03-0.07 µg L-1), high enrichment factors (37-154), and satisfactory relative standard deviations (RSDs) for both within one probe (4.0-14.8%) and between different probes (3.4-12.7%). These remarkable performance characteristics highlight the reliability and precision of the COFs-SPME-ESI-MS method. The developed method was successfully applied to detect five kinds of endogenous androgens in female serum samples, indicating that the developed analytical method has great potential for application in preliminary clinical diagnosis.

A functionalized glass fiber as the adsorbent for efficient analysis of endocrine disruptors in aqueous environments

Estrogens and bisphenols are typical endocrine disruptors (EDs) that pose a potential hazard to the human body due to their widespread presence in aqueous environments. In this study, a β-cyclodextrin porous crosslinked polymer (β-CD-PCP) was prepared in-situ on a glass fiber surface by a nucleophilic substitution reaction. An effective and sensitive solid phase microextraction method using functionalized glass fiber with β-CD-PCP coating as the adsorbent was established for the detection of 11 EDs in a water environment. The β-CD-PCP was in-situ prepared on a glass fiber surface by a nucleophilic substitution reaction. The β-CD-PCP successfully separated five estrogens (ESTs) and six bisphenols (BPs) through hydrophobic and π-π interactions. The conditions affecting extraction were optimized. Under the optimized conditions, the ESTs obtained a high enrichment effect (1795-2328), low limits of detection (0.047 µg L-1) and a good linearity range (0.2-15.0 µg L-1). Furthermore, the spiked recoveries of analyte ESTs in aqueous environments were between 82.9-115.7 %. The results indicated that the prepared functionalized glass fibers exhibited good adsorption properties, and the established analytical method was reliable for monitoring trace ESTs and BPs in aqueous environments.

Recent advance on microextraction sampling technologies for bioanalysis

The contents of target substances in biological samples are usually at low concentration levels, and the matrix of biological samples is usually complex. Sample preparation is considered a very critical step in bioanalysis. At present, the utilization of microextraction sampling technology has gained considerable prevalence in the realm of biological analysis. The key developments in this field focus on the efficient microextraction media and the miniaturization and automation of adaptable sample preparation methods currently. In this review, the recent progress on the microextraction sampling technologies for bioanalysis has been introduced from point of view of the preparation of microextraction media and the microextraction sampling strategies. The advance on the microextraction media was reviewed in detail, mainly including the aptamer-functionalized materials, molecularly imprinted polymers, carbon-based materials, metal-organic frameworks, covalent organic frameworks, etc. The advance on the microextraction sampling technologies was summarized mainly based on in-vivo sampling, in-vitro sampling and microdialysis technologies. Moreover, the current challenges and perspective on the future trends of microextraction sampling technologies for bioanalysis were briefly discussed.

Proteomic Analysis of Human Saliva via Solid-Phase Microextraction Coupled with Liquid Chromatography-Mass Spectrometry

Proteomics of human saliva samples was achieved for the first time via biocompatible solid-phase microextraction (bio-SPME) devices. Upon introduction of a porogen to a conventional C18 coating, porous C18/polyacrylonitrile (PAN) SPME blades were able to extract peptides up to 3.0 kDa and more peptides than commercial SPME blades. Following Trypsin digestion, salivary proteomic analysis was achieved via SPME-LC-MS/MS. Seven endogenous proteins were consistently identified in all saliva samples via bio-SPME. Taking advantage of this strategy, untargeted peptidomics was applied for the comparison of saliva samples between healthy and SARS-CoV-2 positive individuals. The results showed clear peptidomic differences between the viral and healthy saliva samples. This proof-of-concept study demonstrates the potential of bio-SPME-LC-MS/MS for peptidomics and proteomics in biomedical applications.

Solid-phase microextraction coupled to comprehensive multidimensional gas chromatography for food analysis

Solid-phase microextraction and comprehensive multidimensional gas chromatography represent two milestone innovations that occurred in the field of separation science in the 1990s. They have a common root in their introduction and have found a perfect coupling in their evolution and applications. This review will focus on food analysis, where the paradigm has changed significantly over time, moving from a targeted analysis, focusing on a limited number of analytes at the time, to a more holistic approach for assessing quality in a larger sense. Indeed, not only some major markers or contaminants are considered, but a large variety of compounds and their possible interaction, giving rise to the field of foodomics. In order to obtain such detailed information and to answer more sophisticated questions related to food quality and authenticity, the use of SPME-GC × GC-MS has become essential for the comprehensive analysis of volatile and semi-volatile analytes. This article provides a critical review of the various applications of SPME-GC × GC in food analysis, emphasizing the crucial role this coupling plays in this field. Additionally, this review dwells on the importance of appropriate data treatment to fully harness the results obtained to draw accurate and meaningful conclusions.

Recent advances in the use of SPME for drug analysis in clinical, toxicological, and forensic medicine studies

Solid-phase microextraction (SPME) has gained attention as a simple, fast, and non-exhaustive extraction technique, as its unique features enable its use for the extraction of many classes of drugs from biological matrices. This sample-preparation approach consolidates sampling and sample preparation into a single step, in addition to providing analyte preconcentration and sample clean-up. These features have helped SPME become an integral part of several analytical protocols for monitoring drug concentrations in human matrices in clinical, toxicological, and forensic medicine studies. Over the years, researchers have continued to develop the SPME technique, resulting in the introduction of novel sorbents and geometries, which have resulted in improved extraction efficiencies. This review summarizes developments and applications of SPME published between 2016 and 2022, specifically in relation to the analysis of central nervous system drugs, drugs used to treat cardiovascular disorders and bacterial infections, and drugs used in immunosuppressive and anticancer therapies.

Combined volatile compounds and non-targeted metabolomics analysis reveals variation in flavour characteristics, metabolic profiles and bioactivity of mulberry leaves after Monascus purpureus fermentation

BACKGROUND

Mulberry leaves (MLs) are widely used in food because of their nutritional and functional characteristics. However, plant cell walls and natural bitterness influence nutrient release and the flavor properties of MLs. Liquid-state fermentation using Monascus purpureus (LFMP) is a common processing method used to improve food properties. The present study used headspace solid-phase micro extraction gas chromatography-mass spectrometry (HS-SPME-GC-MS) and non-targeted metabolomics to examine changes in volatile and non-volatile metabolites in MLs. The transformation mechanism of LFMP was investigated by microscopic observation and dynamic analysis of enzyme activity, and changes in the biological activity of MLs were analyzed.

RESULTS

LFMP significantly increased total phenolics, total flavonoids, free amino acids and soluble sugars in MLs, at the same time as decreasing phytic acid levels. In total, 92 volatile organic compounds (VOCs) were identified and quantified. VOCs such as (2R,3R)-(-)-2,3-butanediol, terpineol and eugenol showed some improvement in the flavour characteristics of MLs. By using non-targeted metabolomics, 124 unique metabolites in total were examined. LFMP altered the metabolic profile of MLs, mainly in plant secondary metabolism, lipid metabolism and amino acid metabolism. Microscopic observation and dynamic analysis of enzyme activity indicated that LFMP promoted cell wall degradation and biotransformation of MLs. In addition, LFMP significantly increased the angiotensin I-converting enzyme and α-glucosidase inhibitory activity of MLs.

CONCLUSION

LFMP altered the flavour characteristics, metabolite profile and biological activity of MLs. These findings will provide ideas for the processing of MLs into functional foods. In addition, they also provide useful information for biochemical studies of fermented MLs. © 2023 Society of Chemical Industry.

Fabrication and evaluation of a molecular-imprinted-polymer functionalized electrode for selective electric field-assisted solid-phase microextraction of phytohormones

Specific extraction and separation plays a pivotal role in the accurate quantification of trace phytohormones (PHs). However, due to their high polarity, specific capture of PHs is challenging. In this study, under the assistance of electric field, a molecular-imprinted-polymer functionalized electrode (MIP@ED) was in-situ prepared using 3-indoleacetic acid (IAA) as template and employed as the adsorbent of electric field-assisted solid-phase microextraction (EA-SPME) for specific capture of PHs. Results showed that the implementation of electric field during the preparation of MIP@ED and EA-SPME procedures improved the extraction selectivity, the selective factors towards IAA and its structural analogues increased from 2.09 to 2.45 to 2.88-3.51. Under the optimum conditions, the proposed MIP@ED/EA-SPME was combined with HPLC technique to monitor trace PHs in water and agricultural products. The achieved limits of detection were in the ranges of 0.0053-0.011 μg/L and 0.048-0.12 μg/kg for water and agricultural product, respectively. The established approach was successfully applied to quantify trace PHs in real samples, and the spiked recoveries varied from 84.0 % to 118 % with good repeatability (RSDs blow 10 %). The obtained results provided clear evidence that the developed approach employing the MIP@ED/EA-SPME technique demonstrated high sensitivity, good selectivity, satisfactory reproducibility and environmental friendliness in the quantification of trace PHs in complex samples. In addition, the current study supplied a new strategy to enhance the specific recognition performance of MIP-based SPME.

Changes in profiles of volatile compounds and prediction of the storage year of organic green tea during the long-term storage

In the present study, the volatile compounds in organic green tea with a continuous storage period (ranging from 1 to 16 years) were comprehensively analyzed and compared through SDE-GC-MS and chemometrics. The results revealed that the total of 124 volatiles were identified, and their total amount was increased with the prolongation of the storage years. Ketones, alcohols, esters, and aromatic hydrocarbons were the main types of volatiles in organic green tea, among which 26 volatile compounds were significantly correlated with storage years, and six volatile compounds that were most seriously affected by the storage years. The results of the support vector machine classification combined with multiple linear regression analysis showed that the content-period prediction model for the six volatile compounds can accurately predict the storage years of organic green tea. Therefore, this study offers novel insights into volatile compounds changes during the storage of green tea.

A novel block copolymer containing gadolinium oxide nanoparticles in ultrasound assisted-dispersive solid phase microextraction of total arsenic in human foodstuffs: A multivariate optimization methodology

A new poly(3-hydroxy butyrate)-b-poly(dimethyl amino ethyl methacrylate) amphiphilic block copolymer containing gadolinium oxide nanoparticles (PHB-PDMAEMA-Gd2O3-NPs) were synthesized and used as composite adsorbent for extraction of total arsenic. Characterization of the composite adsorbent material PHB-PDMAEMA-Gd2O3-NP was studied using spectroscopic techniques. Plackett-Burman design and central composite design were employed to screening and optimization of the experimental parameters. This composite adsorbent was utilized in ultrasound assisted-dispersive solid phase microextraction (UA-dSPµE) for the determination of total inorganic arsenic in foodstuffs through hydride generation atomic absorption spectrometry (HG-AAS). It demonstrates a linear relationship across arsenic concentration range of 0.07-1.12 µg/L with a correlation coefficient (0.996). It's showed an enrichment factor of 128 and a limit of detection 0.02 µg/L for total inorganic arsenic determination. Accuracy of the developed method was confirmed through the analysis of certified reference materials with 96.0-98.5% recovery. It proved to be significantly useful UA-dSPµE method for determining total inorganic arsenic in different foodstuffs.

Discrimination and characterization of volatile organic compounds in Lonicerae Japonicae flos and Lonicerae flos using multivariate statistics combined with headspace gas chromatography-ion mobility spectrometry and headspace solid-phase microextraction gas chromatography-mass spectrometry techniques

RATIONALE

The volatile organic compounds (VOCs) of Lonicerae Japonicae flos (LJF) and Lonicera flos (LF) play a pivotal role in determining their sensory characteristics, medicinal properties, and subsequent impact on market pricing and consumer preferences. However, the differences and specificity of these VOCs remain obscure. Hence, it is crucial to conduct a comprehensive characterization of the VOCs in LJF and LF and pinpoint their potential differential VOCs.

METHODS

In this study, headspace gas chromatography-ion mobility spectrometry (HS-GC/IMS) and headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC/MS) were employed to comprehensively investigate the compositional characteristics and distinctions in VOCs between LJF and LF. Multivariate statistical analysis was used to identify candidate differential VOCs of LJF and LF samples.

RESULTS

A total of 54 and 88 VOCs were identified using HS-GC/IMS and HS-SPME-GC/MS analysis, respectively. Primary VOCs detected in LJF include leaf alcohol, (E)-2-hexen-1-ol dimer, 2-octyn-1-ol, and (E)-3-hexen-1-ol. Key VOCs prevalent in LF encompass farnesol, heptanoic acid, octanoic acid, and valeric acid. Multivariate statistical analysis indicates that compounds such as phenethyl alcohol and leaf alcohol were selected as potential VOCs for distinguishing between LJF and LF.

CONCLUSION

This research conducted a comprehensive analysis of the fundamental volatile components in both LJF and LF. It subsequently elucidated the distinctions and specificities within their respective VOC profiles. And this study enables differentiation between LJF and LF through the analysis of VOCs, offering valuable insights for enhancing the quality control of both LJF and LF.