UV-induced photocatalytic degradation of aqueous acetaminophen: the role of adsorption and reaction kinetics

Nanostructured titania supported on activated carbon (AC), termed as integrated photocatalytic adsorbents (IPCAs), were prepared by ultrasonication and investigated for the photocatalytic degradation of acetaminophen (AMP), a common analgesic and antipyretic drug. The IPCAs showed high affinity towards AMP (in dark adsorption studies), with the amount adsorbed proportional to the TiO2 content; the highest adsorption was at 10 wt% TiO2. Equilibrium isotherm studies showed that the adsorption followed the Langmuir model, indicating the dependence of the reaction on an initial adsorption step, with maximum adsorption capacity of 28.4 mg/g for 10 % TiO2 IPCA. The effects of initial pH, catalyst amount and initial AMP concentration on the photocatalytic degradation rates were studied. Generally, the AMP photodegradation activity of the IPCAs was better than that of bare TiO2. Kinetic studies on the photocatalytic degradation of AMP under UV suggest that the degradation followed Langmuir-Hinshelwood (L-H) kinetics, with an adsorption rate constant (K) that was considerably higher than the photocatalytic rate constant (k r), indicating that the photocatalysis of AMP is the rate-determining step during the adsorption/photocatalysis process.

Predicting the excess solubility of acetanilide, acetaminophen, phenacetin, benzocaine, and caffeine in binary water/ethanol mixtures via molecular simulation

We present a general framework to predict the excess solubility of small molecular solids (such as pharmaceutical solids) in binary solvents via molecular simulation free energy calculations at infinite dilution with conventional molecular models. The present study used molecular dynamics with the General AMBER Force Field to predict the excess solubility of acetanilide, acetaminophen, phenacetin, benzocaine, and caffeine in binary water/ethanol solvents. The simulations are able to predict the existence of solubility enhancement and the results are in good agreement with available experimental data. The accuracy of the predictions in addition to the generality of the method suggests that molecular simulations may be a valuable design tool for solvent selection in drug development processes.

Corona discharge ionization of paracetamol molecule: peak assignment

Ionization of paracetamol was investigated using ion mobility spectrometry equipped with a corona discharge ionization source. The measurements were performed in the positive ion mode and three peaks were observed in the ion mobility spectrum. Experimental evidence and theoretical calculations were used to correlate the peaks to related ionic species of paracetamol. Two peaks were attributed to protonated isomers of paracetamol and the other peak was attributed to paracetamol fragment ions formed by dissociation of the N-C bond after protonation of the nitrogen atom. It was observed that three sites of paracetamol compete for protonation and their relative intensities, depending on the sample concentration. The ratio of ion products could be predicted from the internal proton affinity of the protonation sites at each concentration.

Ion-exchange selectivity of diclofenac, ibuprofen, ketoprofen, and naproxen in ureolyzed human urine

This research advances the knowledge of ion-exchange of four non-steroidal anti-inflammatory drugs (NSAIDs) - diclofenac (DCF), ibuprofen (IBP), ketoprofen (KTP), and naproxen (NPX) - and one analgesic drug-paracetamol (PCM) - by strong-base anion exchange resin (AER) in synthetic ureolyzed urine. Freundlich, Langmuir, Dubinin-Astakhov, and Dubinin-Radushkevich isotherm models were fit to experimental equilibrium data using nonlinear least squares method. Favorable ion-exchange was observed for DCF, KTP, and NPX, whereas unfavorable ion-exchange was observed for IBP and PCM. The ion-exchange selectivity of the AER was enhanced by van der Waals interactions between the pharmaceutical and AER as well as the hydrophobicity of the pharmaceutical. For instance, the high selectivity of the AER for DCF was due to the combination of Coulombic interactions between quaternary ammonium functional group of resin and carboxylate functional group of DCF, van der Waals interactions between polystyrene resin matrix and benzene rings of DCF, and possibly hydrogen bonding between dimethylethanol amine functional group side chain and carboxylate and amine functional groups of DCF. Based on analysis of covariance, the presence of multiple pharmaceuticals did not have a significant effect on ion-exchange removal when the NSAIDs were combined in solution. The AER reached saturation of the pharmaceuticals in a continuous-flow column at varying bed volumes following a decreasing order of DCF > NPX ≈ KTP > IBP. Complete regeneration of the column was achieved using a 5% (m/m) NaCl, equal-volume water-methanol solution. Results from multiple treatment and regeneration cycles provide insight into the practical application of pharmaceutical ion-exchange in ureolyzed urine using AER.

[TESTING STABILITY OF TABLETED ACETAMINOPHEN AND FUROSEMIDE AFTER 6-MONTH STORAGE IN SPACE FLIGHT]

It was shown that multiple spaceflight factors (i.e., acceleration, overvibration, microgravity etc.) do not impact stability of acetaminophen and furosemide tablets stored onboard the International space station over 6 months. Acetaminophen dose in a tablet was 496.44 ± 6.88 mg (99.29 ± 1.38%) before spaceflight (SF) and 481.77 ± 1 2.40 mg (96.35 ± 0.48%) after 6 mos. of storage; furosemide dose in a tablet was 40.19 ± 0.28 mg (100.47 ± 0.71%) before and 39.24 ± 0.72 mg (98.105 ± 1.80%) after SF remaining within the established limits.

Photonic efficiency of the photodegradation of paracetamol in water by the photo-Fenton process

An experimental study of the homogeneous Fenton and photo-Fenton degradation of 4-amidophenol (paracetamol, PCT) is presented. For all the operation conditions evaluated, PCT degradation is efficiently attained by both Fenton and photo-Fenton processes. Also, photonic efficiencies of PCT degradation and mineralization are determined under different experimental conditions, characterizing the influence of hydrogen peroxide (H2O2) and Fe(II) on both contaminant degradation and sample mineralization. The maximum photonic degradation efficiencies for 5 and 10 mg L(-1) Fe(II) were 3.9 (H2O2 = 189 mg L(-1)) and 5 (H2O2 = 378 mg L(-1)), respectively. For higher concentrations of oxidant, H2O2 acts as a "scavenger" radical, competing in pollutant degradation and reducing the reaction rate. Moreover, in order to quantify the consumption of the oxidizing agent, the specific consumption of the hydrogen peroxide was also evaluated. For all operating conditions of both hydrogen peroxide and Fe(II) concentration, the consumption values obtained for Fenton process were always higher than the corresponding values observed for photo-Fenton. This implies a less efficient use of the oxidizing agent for dark conditions.

Removal of pain-relieving drugs from aqueous solutions using Octolig and selected metalloligs

The possibility of removing certain pharmaceuticals (acetaminophen and naproxen) from water was tested using Octolig, a commercially available material with polyethylenediimine moieties covalently attached to high-surface area silica gel. In addition, the efficacy of two transition metals (cupric and ferric) derivatives of Octolig was tested. Previously amoxicillin had been successfully subjected to column chromatography for removal by means of ion encapsulation, the effectiveness of which would depend upon having appropriate anionic functional groups. Both pharmaceuticals were removed by passage over Octolig columns, though with less effectiveness than was achieved previously with xanthenylbenzenes or selected food dyes. Somewhat greater removal, ca 90%, was achieved using Cuprilig, the copper(II) derivative, but not with Ferrilig the iron(III) derivative, perhaps because the hydroxide counter ion was more closely associated with the transition metal ion and was not available to assist in proton removal.

Formulation and in vitro release studies of pegylated mucin based matrix tablets

The effects of polymer concentration on the flow properties of granules and in-vitro release profiles from matrix tablets of three model drugs formulated from pegylated mucin base was investigated. Mucin was extracted from the African giant snail and in combination with PEG was used to produce a copolymer matrix base, which was mixed with the model drugs using wet granulation method. The granules and tablets were evaluated according to official and unofficial requirements. Results showed best flow with Acetylsalicylic acid (ASA) and Chloroquine Phosphate (CQ) granules with Hausner ratio of 1.04-1.2, Carr's index of 4.2-17.5% and angle of repose between 19°-26°. The tablets met B.P specifications with respect to tablet weights, friability and drug content. The release profiles showed faster release of the drug with high content of PEG and a slower release with high concentration of mucin. Pegylated mucin base will find useful application in the development of a wide range of formulations.

Biocatalytic spectrophotometric method to detect paracetamol in water samples

A biocatalytic methodology based on the quantification of the laccase inhibition during the oxidation of a standard substrate ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) for the indirect determination of paracetamol in drinking water has been developed. The method displayed a fast response time (20 s), and high selectivity to paracetamol in presence of interfering substances such as naproxen, estradiol, ketoprofen, sulfamethoxazole, and diclofenac. The limit of detection (LOD) and limit of quantification (LOQ) were noticed to be 0.55 µM and 8.3 µM, respectively. By comparing the catalytic constants value KM and kcat for ABTS oxidation in the absence and presence of various concentrations of paracetamol, a competitive-type inhibition was disclosed. On the other hand, the close value between Ki and KM indicates similar binding affinity of the enzyme to ABTS and paracetamol corroborated by docking studies. The methodology was successfully applied to real water samples, presenting an interesting potential for further development of a biosensor to paracetamol detection.

Electrochemical performance of porous diamond-like carbon electrodes for sensing hormones, neurotransmitters, and endocrine disruptors

Porous diamond-like carbon (DLC) electrodes have been prepared, and their electrochemical performance was explored. For electrode preparation, a thin DLC film was deposited onto a densely packed forest of highly porous, vertically aligned multiwalled carbon nanotubes (VACNT). DLC deposition caused the tips of the carbon nanotubes to clump together to form a microstructured surface with an enlarged surface area. DLC:VACNT electrodes show fast charge transfer, which is promising for several electrochemical applications, including electroanalysis. DLC:VACNT electrodes were applied to the determination of targeted molecules such as dopamine (DA) and epinephrine (EP), which are neurotransmitters/hormones, and acetaminophen (AC), an endocrine disruptor. Using simple and low-cost techniques, such as cyclic voltammetry, analytical curves in the concentration range from 10 to 100 μmol L(-1) were obtained and excellent analytical parameters achieved, including high analytical sensitivity, good response stability, and low limits of detection of 2.9, 4.5, and 2.3 μmol L(-1) for DA, EP, and AC, respectively.

[Impact factors and degradation mechanism for the ozonation of acetaminophen in aqueous solution]

The effect and mechanism of O3 on the degradation of acetaminophen in aqueous solution were studied by the batch experiment. The results showed that acetaminophen could be degraded effectively by ozone and degradation of acetaminophen fitted well with the pseudo-first-order kinetics model (R2 > 0.992). The degradation of acetaminophen was promoted with the increase of pH, the concentration of bicarbonate and ozone. The results of gas chromatography-mass spectrometry (GC-MS) and ion chromatography analysis showed that degradation products such as hydroquinone and a series of carboxylic acids were firstly formed during ozonation of acetaminophen. Then, the products were further oxidized. The degradation pathways of acetaminophen were also discussed by the identified products. The result of TOC showed that the mineralization of acetaminophen was ultimately lower. When the initial concentration of acetaminophen was 20 mg x L(-1) and the concentration of ozone was 9.10 mg x L(-1), the mineralization was only 16.42% after 130 min.

Ultrasonic degradation of acetaminophen in water: effect of sonochemical parameters and water matrix

This paper deals about the sonochemical water treatment of acetaminophen (ACP, N-acetyl-p-aminophenol or paracetamol), one of the most popular pharmaceutical compounds found in natural and drinking waters. Effect of ultrasonic power (20-60 W), initial ACP concentration (33-1323 μmol L(-1)) and pH (3-12) were evaluated. High ultrasonic powers and, low and natural acidic pH values favored the efficiency of the treatment. Effect of initial substrate concentration showed that the Langmuir-type kinetic model fit well the ACP sonochemical degradation. The influence of organic compounds in the water matrix, at concentrations 10-fold higher than ACP, was also evaluated. The results indicated that only organic compounds having a higher value of the Henry's law constant than the substrate decrease the efficiency of the treatment. On the other hand, ACP degradation in mineral natural water showed to be strongly dependent of the initial substrate concentration. A positive matrix effect was observed at low ACP concentrations (1.65 μmol L(-1)), which was attributed to the presence of bicarbonate ion in solution. However, at relative high ACP concentrations a detrimental effect of matrix components was noticed. Finally, the results indicated that ultrasonic action is able to transform ACP in aliphatic organic compounds that could be subsequently eliminated in a biological system.

Evaluation of coprocessed disintegrants produced from tapioca starch and mannitol in orally disintegrating paracetamol tablet

The study evaluated two novel coprocessed excipients (with two methods) as disintegrants in an orally disintegrating paracetamol tablet formulation. The tablets produced were assessed for mechanical properties with the use of friability and tensile strength while the release properties were assessed with wetting time, water absorption ratio, disintegration time and dissolution profile. The results obtained showed that the methods of coprocessing and disintegrant incorporation influenced the activities of the disintegrants. The novel disintegrant enhanced the mechanical properties of the tablets containing them as shown by lower friability and higher tensile strength of the tablets. The result further showed that the rate and amount of water absorbed, type of disintegrant and the method of disintegrant incorporation influenced the total amount of paracetamol released. The study concluded that the novel disintegrants will be effective in the formulation of orally disintegrating paracetamol tablets.

Synthesis and characterization of combined cross-linked laccase and tyrosinase aggregates transforming acetaminophen as a model phenolic compound in wastewaters

Laccase (EC 1.10.3.2) and tyrosinases (EC 1.14.18.1) are ubiquitous enzymes present in nature as they are known to originate from bacteria, fungi, plants, etc. Both laccase and tyrosinase are copper-containing phenoloxidases requiring readily available O2 without auxiliary cofactor for their catalytic transformation of numerous phenolic substrates. In the present study, laccase and tyrosinase have been insolubilized as combined crosslinked enzyme aggregates (combi-CLEA) using chitosan, a renewable and biodegradable polymer, as crosslinker. The combi-CLEA, with specific activity of 12.3 U/g for laccase and 167.4 U/g for tyrosinase, exhibited high enzymatic activity at pH5-8 and temperature at 5-30°C, significant resistance to denaturation and no diffusional restriction to its active site based upon the Michaelis-Menten kinetic parameters. Subsequently, the combi-CLEA was applied to the transformation of acetaminophen as a model phenolic compound in samples of real wastewaters in order to evaluate the potential efficiency of the biocatalyst. In batch mode the combi-CLEA transformed more than 80% to nearly 100% of acetaminophen from the municipal wastewater and more than 90% from the hospital wastewater. UPLC-MS analysis of acetaminophen metabolites showed the formation of its oligomers as dimers, trimers and tetramers due to the laccase and 3-hydroxyacetaminophen due to the tyrosinase.

Radical induced degradation of acetaminophen with Fe3O4 magnetic nanoparticles as heterogeneous activator of peroxymonosulfate

Magnetic nano-scaled particles Fe3O4 were studied for the activation of peroxymonosulfate (PMS) to generate active radicals for degradation of acetaminophen (APAP) in water. The Fe3O4 MNPs were found to effectively catalyze PMS for removal of APAP, and the reactions well followed a pseudo-first-order kinetics pattern (R(2)>0.95). Within 120min, approximately 75% of 10ppm APAP was accomplished by 0.2mM PMS in the presence of 0.8g/L Fe3O4 MNPs with little Fe(3+) leaching (<4μg/L). Higher Fe3O4 MNP dose, lower initial APAP concentration, neutral pH, and higher reaction temperature favored the APAP degradation. The production of sulfate radicals and hydroxyl radicals was validated through two ways: (1) indirectly from the scavenging tests with scavenging agents, tert-butyl alcohol (TBA) and ethanol (EtOH); (2) directly from the electron paramagnetic resonance (ESR) tests with 0.1M 5,5-dimethyl-1-pyrrolidine N-oxide (DMPO). Plausible mechanisms on the radical generation from Fe3O4 MNP activation of PMS are proposed based on the results of radical identification tests and XPS analysis. It appeared that Fe(2+)Fe(3+) on the catalyst surface was responsible for the radical generation. The results demonstrated that Fe3O4 MNPs activated PMS is a promising technology for water pollution caused by contaminants such as pharmaceuticals.

Environmental risk assessment of selected pharmaceuticals in Turkey

In this study, environmental risks of selected pharmaceuticals were investigated to assess potential hazards. Ciprofloxacin, Clarithromycin, Cefuroxime axetil, antibiotics, Benzalkoniuman antiseptic, Paracetamol, an analgesic, and Naproxen, an anti-inflammatory, were selected due to their high rate of usage in Turkey. Ciprofloxacin was found to have the highest risk due to its high PEC/PNEC ratio (28.636). Benzalkonium, Paracetamol and Clarithromycin have a potential to cause environmental hazards. The biodegradation and biological concentration factors (BCF) of the drugs were also determined using EPA/STWIN and EPA/BCFWIN programs. The results illustrated that these pharmaceuticals are nonbiodegradable in wastewater treatment plants. The BCFs of Benzalkonium and Clarithromycin were found to be very high, 70.790 L/kg and 56.490 L/kg, respectively. It was suggested that alternative treatment methods other than biological ones should be investigated for these pharmaceuticals because of their low biodegradability. Also, unnecessary use of antibiotics is supposed to be discouraged to reduce environmental hazards.

Quantitative surface analysis of a binary drug mixture--suppression effects in the detection of sputtered ions and post-ionized neutrals

A systematic mass spectrometric study of two of the most common analgesic drugs, paracetamol and ibuprofen, is reported. The drugs were studied by means of secondary ion mass spectrometry (SIMS) and secondary neutral mass spectrometry (SNMS) using laser post-ionization (LPI) both in pure samples and in a two-component mixture. Ion suppression within the two-component system observed in SIMS mode is ameliorated using LPI under room temperature analysis. However, suppression effects are apparent in LPI mode on performing the analysis at cryogenic temperatures, which we attribute to changes in the desorption characteristics of sputtered molecules, which influences the subsequent post-ionization efficiency. This suggests different mechanisms of ion suppression in SIMS and LPI modes.

Transformation of paracetamol into 1,4-benzoquinone by a manganese oxide bed filter

This study investigates the transformation of paracetamol (PRC) by a granular manganeseoxide in a column bed reactor. Paracetamol was quantitatively transformed into p-benzoquinone(BZQ) for empty bed residence times (EBRT) <5 min at pH 6.0. For 5mM MOPS (3-morpholinopropane-1-sulfonic acid) and pH 7.0, the mean removal yield of PRC was 77% for initial PRC concentrations ranging from 0.1 to 50 μM. Conversion of PRC and formation of BZQ decreased when pH increased from 6 to 8. Dimer of PRC was observed at pH 7.0, which could explain the lower conversion into BZQ when pH increased. The presence of organic buffer MOPS and natural organic matter (NOM) reduced the oxidation of PRC because of competition reactions for active sites. The formation of the toxic BZQ metabolite was reduced in presence of NOM because of cross-coupling reactions between phenoxyl radicals and NOM. Results suggest that manganese oxide bed filter can be used to remove pharmaceutical compounds including phenolic moiety in their structure.

Adsorption characteristics of selected hydrophilic and hydrophobic micropollutants in water using activated carbon

In this study, we investigated adsorption characteristics of nine selected micropollutants (six pharmaceuticals, two pesticides, and one endocrine disruptor) in water using an activated carbon. The effects of carbon dosage, contact time, pH, DOM (dissolved organic matter), and temperature on the adsorption removal of micropollutants were examined. Increasing carbon dosage and contact time enhanced the removal of micropollutants. Sorption coefficients of hydrophilic compounds (caffeine, acetaminophen, sulfamethoxazole, and sulfamethazine) fit a linear isotherm and hydrophobic compounds (naproxen, diclofenac, 2, 4-D, triclocarban, and atrazine) fit a Freundlich isotherm. The removal of hydrophobic pollutants and caffeine were independent of pH changes, but acetaminophen, sulfamethazine, and sulfamethoxazole were adsorbed by mainly electrostatic interaction with activated carbon and so were affected by pH. The decrease in adsorption removal in surface water samples was observed and this decrease was more significant for hydrophobic than hydrophilic compounds. The decline in the adsorption capacity in surface water samples is caused by the competitive inhibition of DOM with micropollutants onto activated carbon. Low temperature (5°C) also decreased the adsorption removal of micropollutants, and affected hydrophobic compounds more than hydrophilic compounds. The results obtained in this study can be applied to optimize the adsorption capacities of micropollutants using activated carbon in water treatment process.

Assessing the photochemical transformation pathways of acetaminophen relevant to surface waters: transformation kinetics, intermediates, and modelling

This work shows that the main photochemical pathways of acetaminophen (APAP) transformation in surface waters would be direct photolysis (with quantum yield of (4.57 ± 0.17)⋅10(-2)), reaction with CO3(-·) (most significant at pH > 7, with second-order rate constant of (3.8 ± 1.1)⋅10(8) M(-1) s(-1)) and possibly, for dissolved organic carbon higher than 5 mg C L(-1), reaction with the triplet states of chromophoric dissolved organic matter ((3)CDOM*). The modelled photochemical half-life time of APAP in environmental waters would range from days to few weeks in summertime, which suggests that the importance of phototransformation might be comparable to biodegradation. APAP transformation by the main photochemical pathways yields hydroxylated derivatives, ring-opening compounds as well as dimers and trimers (at elevated concentration levels). In the case of (3)CDOM* (for which the triplet state of anthraquinone-2-sulphonate was used as proxy), ring rearrangement is also hypothesised. Photochemistry would produce different transformation products (TPs) of APAP than microbial biodegradation or human metabolism, thus the relevant TPs might be used as markers of APAP photochemical reaction pathways in environmental waters.

Evaluation of dysprosia aerogels as drug delivery systems: a comparative study with random and ordered mesoporous silicas

Biocompatible dysprosia aerogels were synthesized from DyCl3·6H2O and were reinforced mechanically with a conformal nano-thin-polyurea coating applied over their skeletal framework. The random mesoporous space of dysprosia aerogels was filled up to about 30% v/v with paracetamol, indomethacin, or insulin, and the drug release rate was monitored spectrophotometrically in phosphate buffer (pH = 7.4) or 0.1 M aqueous HCl. The drug uptake and release study was conducted comparatively with polyurea-crosslinked random silica aerogels, as well as with as-prepared (native) and polyurea-crosslinked mesoporous silica perforated with ordered 7 nm tubes in hexagonal packing. Drug uptake from random nanostructures (silica or dysprosia) was higher (30-35% w/w) and the release rate was slower (typically >20 h) relative to ordered silica (19-21% w/w, <1.5 h, respectively). Drug release data from dysprosia aerogels were fitted with a flux equation consisting of three additive terms that correspond to drug stored successively in three hierarchical pore sites on the skeletal framework. The high drug uptake and slow release from dysprosia aerogels, in combination with their low toxicity, strong paramagnetism, and the possibility for neutron activation render those materials attractive multifunctional vehicles for site-specific drug delivery.

Evaluation of medicated gel as a supplement to providing acetaminophen in the drinking water of C57BL/6 mice after surgery

After surgery, rodents frequently receive acetaminophen-treated drinking water for pain relief, but the effectiveness of this practice is often questioned. Gel products are now available to facilitate the delivery of oral medication to rodents after surgery. We sought to compare consumption of flavored medicated gel and medicated water after surgery and to determine whether providing supplemental acetaminophen in gel form ensures the ingestion of a therapeutic dose of an analgesic after surgery. Male C57BL/6 mice were allocated into 3 groups after surgery: those that received acetaminophen-treated water and untreated gel (MW group); those that received medicated gel and untreated water (MG group); and those that received acetaminophen in both forms (MWG group). Total water and gel consumption were monitored daily from the day before surgery until 2 d thereafter. Mice in the MG group consumed significantly less gel than water, and consequently, the total acetaminophen dose per mouse in the MG group (49 mg/kg) was significantly less than that of the MWG group (347 mg/kg). Although the dose consumed by mice in the MW group (158 mg/kg) approached the targeted acetaminophen dose of 200 mg/kg, only mice in the MWG group actually achieved the desired dose. The results of this study indicate that flavored acetaminophen-containing gel can be used in combination with medicated water to ensure that rodents ingest the targeted dose of medication.

[Synergetic taste masking of lipid coating and beta-cyclodextrin inclusion]

Paracetamol was used as a model drug in this study to investigate the synergetic effects of lipid coating and beta-cyclodextrin (beta-CD) inclusion for masking the bitter taste of poorly soluble drugs. To control the concentration as low as possible of the free drug which produced a bitter taste, a kinetic model was established to calculate the drug distribution theoretically among the free drug in medium, lipid coated particles and molecular inclusion on the basis of the preparation and characterization of the lipid microspheres, so as to select the proper amount of beta-CD. Finally, the synergetic drug delivery systems were prepared and characterized by 1H nuclear magnetic resonance (1H NMR), molecular simulation and the electronic tongue. As a result, the drug release rate constant (k) of the lipid microspheres coated with octadecanol was determined as 0.001 270 s(-1). Then, the synergetic drug delivery systems were prepared with the ratio of 6.74 : 1 (w/w) for beta-CD and paracetamol. The chemical shift values for the fingerprint peaks of paracetamol all increased and hydrogen bonds were formed between the oxygen on the phenolic hydroxyl group, the nitrogen on the imino in paracetamol and the hydrogens on the hydroxyl groups in beta-CD. The results tested by the electronic tongue indicated that the paracetamol, lipid microspheres, beta-CD inclusion and their mixture showed different taste characteristics, with the bitterness order of the synergetic drug delivery systems approximately lipid microspheres < beta-CD inclusion < paracetamol, which confirmed the synergetic taste masking effects of lipid coating and beta-CD molecular inclusion. In summary, the synergetic taste masking was jointly achieved through the retard of the drug release by the lipid coating and the inclusion of the free paracetamol by beta-CD through hydrogen bonds.

Understanding a substrate's product regioselectivity in a family of enzymes: a case study of acetaminophen binding in cytochrome P450s

Product regioselectivity as influenced by molecular recognition is a key aspect of enzyme catalysis. We applied large-scale two-dimensional (2D) umbrella sampling (USP) simulations to characterize acetaminophen (APAP) binding in the active sites of the family of Cytochrome P450 (CYP) enzymes as a case study to show the different regioselectivity exhibited by a single substrate in comparative enzymes. Our results successfully explain the experimentally observed product regioselectivity for all five human CYPs included in this study, demonstrating that binding events play an important role in determining regioselectivity. In CYP2C9 and CYP3A4, weak interactions in an overall large active site cavity result in a fairly small binding free energy difference between APAP reactive binding states, consistent with experimental results that show little preference for resulting metabolites. In contrast, in CYP1A2 and CYP2E1, APAP is strongly restrained by a compact binding pocket, leading to a preferred binding conformation. The calculated binding equilibrium of APAP within the compact active site of CYP2A6 is able to predict the experimentally documented product ratios and is also applied to explain APAP regioselectivity in CYP1A2 and CYP2C9. APAP regioselectivity seems to be related to the selectivity for one binding conformation over another binding conformation as dictated by the size and shape of the active site. Additionally, unlike docking and molecular dynamics (MD), our free energy calculations successfully reproduced a unique APAP pose in CYP3A4 that had been reported experimentally, suggesting this approach is well suited to find the realistic binding pose and the lowest-energy starting structure for studying the chemical reaction step in the future.

Degradation and transformation products of acetaminophen in soil

Acetaminophen is the most widely used human medicine. Trace levels of acetaminophen are frequently detected in treated wastewater and the impacted surface or groundwater resources. However, even though soil is a primary receiving compartment, the fate of acetaminophen in soil is poorly known, including in particular the potential for the formation of incomplete degradation products that may have altered biological activity and mobility. In this study, using both (14)C-labeling and LC-MS/MS techniques, we evaluated the dissipation routes and transformation pathways of acetaminophen in soils under a range of conditions. Throughout 120-d aerobic incubation, up to 17.0 ± 0.8% of (14)C-acetaminophen was mineralized, but mineralization was greatly inhibited after sterilization or amendment of biosolids. Immediately after treatment, the majority of (14)C-residue became non-extractable or bound, with the level accounting for 73.4-93.3% of the applied amount at the end of incubation. A total of 8 intermediates were identified, including 3-hydroxyacetaminophen, hydroquinone, 1, 4-benzoquinone, N-acetyl-p-benzoquinone imine, p-acetanisidide, 4-methoxyphenol, 2-hexenoic acid, and 1, 4-dimethoxybenzene. Mineralization and rapid conversion to bound residues suggest that acetaminophen is quickly detoxified in soil, decreasing the potential for off-site transport such as leaching or runoff. On the other hand, the formation of a large number of degradation intermediates, and their potential biological activity, may pose unknown risks, such as accumulation into edible plants. This risk warrants further investigation.

Investigation of critical core formulation and process parameters for osmotic pump oral drug delivery

Push-pull osmotic pump (PPOP) tablets of a practically insoluble model drug were developed and the effect of various formulation and process parameters on tablet performance was evaluated in order to identify critical factors. The formulation factors such as the viscosity grade of polyethylene oxide as the primary polymer as well as the level and location of osmogen within the bilayer tablets led to a difference in performance of osmotic tablets and hence should be critically evaluated in the design of such dosage forms. Modification of granulation process, i.e., the granulating liquid composition or drying method of granules, did not impact the drug release from the osmotic tablets at the evaluated scale of this study. The influence of varying dose and aqueous solubility of other model drugs (i.e., theophylline, acetaminophen, and verapamil HCl) on the developed PPOP template was also investigated. Results showed that irrespective of the perceived complexity of development and manufacturing of osmotic pumps, the osmotic tablets in this study demonstrated a robust and yet flexible platform in accommodating different types of drug candidates, regardless of solubility, for the dose levels below 25% w/w of the pull layer formulation.

Dual drug release electrospun core-shell nanofibers with tunable dose in the second phase

This study reports a new type of drug-loaded core-shell nanofibers capable of providing dual controlled release with tunable dose in the second phase. The core-shell nanofibers were fabricated through a modified coaxial electrospinning using a Teflon-coated concentric spinneret. Poly(vinyl pyrrolidone) and ethyl cellulose were used as the shell and core polymer matrices respectively, and the content of active ingredient acetaminophen (APAP) in the core was programmed. The Teflon-coated concentric spinneret may facilitate the efficacious and stable preparation of core-shell nanofibers through the modified coaxial electrospinning, where the core fluids were electrospinnable and the shell fluid had no electrospinnability. The resultant nanofibers had linear morphologies and clear core-shell structures, as observed by the scanning and transmission electron microscopic images. APAP was amorphously distributed in the shell and core polymer matrices due to the favorite second-order interactions, as indicated by the X-ray diffraction and FTIR spectroscopic tests. The results from the in vitro dissolution tests demonstrated that the core-shell nanofibers were able to furnish the desired dual drug controlled-release profiles with a tunable drug release amount in the second phase. The modified coaxial electrospinning is a useful tool to generate nanostructures with a tailored components and compositions in their different parts, and thus to realize the desired functional performances.

Kinetic study of acetaminophen degradation by visible light photocatalysis

In this work, a novel photocatalyst K3[Fe(CN)6]/TiO2 synthesized via a simple sol-gel method was utilized to degrade acetaminophen (ACT) under visible light with the use of blue and green LED lights. Parameters (medium pH, initial concentration of reactant, catalyst concentration, temperature, and number of blue LED lights) affecting photocatalytic degradation of ACT were also investigated. The experimental result showed that compared to commercially available Degussa P-25 (DP-25) photocatalyst, K3[Fe(CN)6]/TiO2 gave higher degradation efficiency and rate constant (kapp) of ACT. The degradation efficiency or kapp decreased with increasing initial ACT concentration and temperature, but increased with increased number of blue LED lamps. Additionally, kapp increased as initial pH was increased from 5.6 to 6.9, but decreased at a high alkaline condition (pH 8.3). Furthermore, the degradation efficiency and kapp of ACT increased as K3[Fe(CN)6]/TiO2 loading was increased to 1 g L(-1) but decreased and eventually leveled off at photocatalyst loading above this value. Photocatalytic degradation of ACT in K3[Fe(CN)6]/TiO2 catalyst system follows a pseudo-first-order kinetics. The Langmuir-Hinshelwood equation was also satisfactorily used to model the degradation of ACT in K3[Fe(CN)6]/TiO2 catalyst system indicated by a satisfactory linear correlation between 1/kapp and Co, with kini = 6.54 × 10(-4) mM/min and KACT = 17.27 mM(-1).

An effect of cellulose crystallinity on the moisture absorbability of a pharmaceutical tablet studied by near-infrared spectroscopy

In this study, we investigated molecular-level variation of tablets caused by grinding and its effect on their actual moisture absorbability. Model tablets contained acetaminophen as an active pharmaceutical ingredient and microcrystalline cellulose (MCC) as an excipient. Different levels of grinding were applied during the tablet formulation to intentionally cause the structural variation of the MCC. The moisture absorbability of tablets showed obvious variation depending on the grinding time, and the corresponding change in near-infrared spectra was readily captured. The detailed analysis of the variation of the band frequencies (i.e., wavenumber) revealed that the grinding process substantially disintegrates the crystalline and generates a glassy amorphous structure of MCC, which is a requirement to absorb water molecules. Consequently, it is very likely that the change of the moisture absorbability of the tablets is closely related to the development of the amorphous structure. These results indicate that the pharmaceutical product performances can be influenced by the physical properties of the excipient, which in turn can be controlled by the grinding process.

Photocatalytic degradation of acetaminophen in modified TiO2 under visible irradiation

This study investigated the photocatalytic degradation of acetaminophen (ACT) in synthetic titanium dioxide (TiO2) solution under a visible light (λ >440 nm). The TiO2 photocatalyst used in this study was synthesized via sol-gel method and doped with potassium aluminum sulfate (KAl(SO4)2) and sodium aluminate (NaAlO2). The influence of some parameters on the degradation of acetaminophen was examined, such as initial pH, photocatalyst dosage, and initial ACT concentration. The optimal operational conditions were also determined. Results showed that synthetic TiO2 catalysts presented mainly as anatase phase and no rutile phase was observed. The results of photocatalytic degradation showed that LED alone degraded negligible amount of ACT but with the presence of TiO2/KAl(SO4)2, 95% removal of 0.10-mM acetaminophen in 540-min irradiation time was achieved. The synthetic TiO2/KAl(SO4)2 presented better photocatalytic degradation of acetaminophen than commercially available Degussa P-25. The weak crystallinity of synthesized TiO2/NaAlO2 photocatalyst showed low photocatalytic degradation than TiO2/KAl(SO4)2. The optimal operational conditions were obtained in pH 6.9 with a dose of 1.0 g/L TiO2/KAl(SO4)2 at 30 °C. Kinetic study illustrated that photocatalytic degradation of acetaminophen fits well in the pseudo-first order model. Competitive reactions from intermediates affected the degradation rate of ACT, and were more obvious as the initial ACT concentration increased.

Combined UV/vis and micro-tomography investigation of acetaminophen dissolution from granules

The X-ray micro-tomography (micro-CT) technique has been used to visualize the microstructure of granules produced by high shear wet granulation and the dynamic evolution of porosity during granule dissolution. Using acetaminophen (paracetamol) as the active pharmaceutical ingredient (API) and microcrystalline cellulose (Avicel PH-200) as an excipient, the porosity of the granules was systematically influenced by the granulation process parameters (binder/solids ratio, impeller speed and wet massing time). An increase of granule porosity from 7% to 10% and 18% lead to a decrease of the dissolution time t90 from 435 min to 98 min and 37 min, respectively. The combination of time-resolved micro-CT imaging with UV/vis detection of the quantity dissolved made it possible to evaluate the effective diffusion coefficient of the API through the granule structure, and thus establish a quantitative structure–property relationship for dissolution. A power-law dependence of the effective diffusivity on porosity (Archie's law) was found to hold.

Ambient molecular imaging by laser ablation atmospheric pressure chemical ionization mass spectrometry

RATIONALE

The functions and properties of compounds are not only specified by their chemical structures, but also by their location inside a sample. Mass spectrometry is a powerful tool for imaging, whereby the kind of sample and compound depend on the used sampling and ionization methods. The developed laser ablation mass spectrometry method delivers high resolution images of small molecules in native samples.

METHODS

A UV laser ablation (LA) system was combined with an atmospheric pressure chemical ionization (APCI) mass spectrometer. The spatially resolved sampling was performed by focusing the 213 nm laser beam onto a sample. The fine aerosol generated by the ns pulsed laser irradiation was then transported to the APCI mass spectrometer by a nitrogen stream. In the APCI source, post-ionization was accomplished by a corona discharge. The resulting ions were detected with an orbitrap mass spectrometer.

RESULTS

The properties of the novel LA-APCI-MS setup are demonstrated by spatially resolved analysis of several samples including tablets, TLC plates and dried droplets. The target compounds are detected with high spatial and mass resolution. For higher molecular weight compounds like thyroxine, fragmentation was observed, whereas small molecules like caffeine stayed intact.

CONCLUSIONS

LA-APCI-MS is introduced as an ambient molecular mass spectral imaging method for molecules with high resolution in space and mass. The combination of two independent instruments offers flexible ion source and mass analyzer exchange and therefore LA-APCI-MS opens up new possibilities for molecular imaging under ambient conditions.

The phase-resolved photoacoustic method to indicate chemical assignments of paracetamol

In this work, the phase-resolved photoacoustic method was applied to provide specific information on the chemical assignments of paracetamol in the near-infrared region. Two broad bands, centered at 1370 and 1130 nm, were well-resolved using this method, making it possible to assign the peaks centered at 1398, 1355 and 1295 nm to a C-H combination from a CH3 structure and the peak at 1305 nm to a C-H combination from the aromatic ring. This information represents a new finding in chemical studies regarding this medicament.

Interaction of erythromycin ethylsuccinate and acetaminophen with protein fraction of extracellular polymeric substances (EPS) from various bacterial aggregates

Extracellular polymeric substances (EPS) are, along with microbial cells, the main components of the biological sludges used in wastewater treatment and natural biofilms. EPS play a major role in removing pollutants from water by means of sorption. The ability of soluble EPS (S-EPS) and bound EPS (B-EPS) derived from various bacterial aggregates (flocs, granules, biofilms) to bind at pH 7.0 ± 0.1 to two pharmaceutical substances, acetaminophen (ACE) and erythromycin ethylsuccinate (ERY), has been investigated using the fluorescence quenching method. Two intense fluorescence peaks, A (Ex/Em range, 200-250/275-380 nm) and B (Ex/Em range, 260-320/275-360 nm), corresponding respectively to the aromatic protein region and soluble microbial by-product-like region, were identified in a three-dimensional excitation-emission matrix of EPS samples. The fluorescence peak, which corresponds to humic-like substances, was also identified though at low intensity. The ability of EPS to bind ACE was found to exceed that for ERY. The aromatic protein fraction of EPS displays a slightly higher affinity for drugs than that shown by the soluble microbial by-product-like fraction. The S-EPS and B-EPS present the same affinity for ACE and ERY. The effective quenching constants (log K) derived from the Stern-Volmer Equation equaled at peak A (with S-EPS): 3.7 ± 0.2 to 4.0 ± 0.1 for ACE and 2.1 ± 0.3 to 2.7 ± 0.1 for ERY. With B-EPS, these values were 3.9 ± 0.1 to 4.0 ± 0.1 for ACE and 2.0 ± 0.2 to 2.6 ± 0.1 for ERY. Our results suggest that the weaker EPS affinity for ERY than for ACE serves to partially explain why only about 50-80 % of ERY is removed from wastewater at the treatment plant. Moreover, this work demonstrates that EPS from natural river biofilms are able to bind drugs, which in turn may limit the mobility of drugs in natural waters.

Carbon materials as new nanovehicles in hot-melt drug deposition

The application of commercially available carbon materials (nanotubes and porous carbons) for the preparation of drug delivery systems is studied. We used two types of carbon nanotubes (CNT) and two activated carbons as potential materials in so-called hot-melt drug deposition (HMDD). The materials were first studied using Raman spectroscopy. Paracetamol was chosen as a model drug. The performed thermal analysis, kinetics, and adsorption-desorption studies revealed that nanoaggregates are formed between carbon nanotubes. In contrast, in pores of activated carbon we do not observe this process and the drug adsorption phenomenon mechanism is simply the filling of small pores. The formation of nanoaggregates was confirmed by the results of GCMC (grand canonical Monte Carlo) simulations and the study of the surface area on nitrogen adsorption-desorption isotherms. The application of carbon nanotubes in HMDD offers the possibility of controlling the rate of drug delivery. Performed MTT tests of nanotubes and drug-loaded nanotubes show that the observed decrease in cell viability number is caused by the influence of the cytostatic properties of nanotubes-they inhibit the proliferation of cells. The carbon nanotubes studied in this paper are essentially nontoxic.

Application of differential scanning calorimetry in evaluation of solid state interactions in tablets containing acetaminophen

Differential scanning calorimetry (DSC) is an analytical procedure used to determine the differences in the heat flow generated or absorbed by the sample. This method allows to assess purity and polymorphic form of drug compounds, to detect interactions between ingredients of solid dosage forms and to analyze stability of solid formulations. The aim of this study was the assessment of compatibility between acetaminophen (API) and different types of excipients often used in tablets compression: polyvinylpyrrolidone, crospovidone, pregelatinized starch, microcrystalline cellulose and magnesium stearate by differential scanning calorimetry. The study contains results of thermal analysis of excipients and individually performed mixtures of these substances with acetaminophen before and after compression and after 6 months storage of tablets at different temperature and relative humidity conditions (25 +/- 2 degrees C /40 +/- 5% RH, 25 +/- 2 degrees C /60 +/- 5% RH, 40 +/- 2 degrees C /75 +/- 5% RH) for a period of 6 months. To detect possible changes of API chemical structure, gas chromatography-mass spectrometry (GC-MS) was also applied. GC-MS with electron impact ionization (EI) was employed to determine the fragmentation pattern of API. It was shown that the developed formulations showed excellent compatibility among all excipients used except Kollidon CL. The interaction with Kollidon CL is probably a result of a physical reaction as confirmed by GC-MS analyses. Obtained results revealed that DSC can be successfully applied to evaluate possible incompatibilities between acetaminophen and Kollidon.

Biochemical effects of acetaminophen in aquatic species: edible clams Venerupis decussata and Venerupis philippinarum

Acetaminophen (paracetamol) is one of the most used pharmaceutical drugs, due to its antipyretic and analgesic properties that turn it into a primary choice in varied pathologies and conditions. However, and despite its massive use, acetaminophen is not exempt of adverse effects, especially when administered in over dosage, which are related to the formation of toxic metabolites by oxidative pathways. It is thus possible to observe that toxicity caused by acetaminophen is usually mediated by reactive oxygen species and can result in multiple effects, ranging from protein denaturation to lipid peroxidation and DNA damage. The occurrence of acetaminophen has been reported in the aquatic environment, being important to address the potential exertion of toxic effects on nontarget environmentally exposed organisms. The present study intended to characterize the effects of acute acetaminophen exposure on physiological traits (antioxidant defense, oxidative damage) of two species of bivalves, namely, the edible clams Venerupis decussata and Venerupis philippinarum. Results showed a significant increase in all oxidative stress biomarkers, evidencing the bioactivation of acetaminophen into a deleterious prooxidant, triggering the onset of deleterious effects. Furthermore, strong interspecific differences were observed among responses of the two tested species, which was a major issue due to intrinsic ecological implications when one considers that both species share the same habitat.

Synthesis, kinetics and pharmacological evaluation of mefenamic acid mutual prodrug

A novel mutual prodrug (MA-P) consisting of mefenamic acid (MA) and paracetamol (P) has been synthesized as a gastrosparing NSAID, devoid of ulcerogenic side effects. The structure of synthesized drug was confirmed by elemental analysis, infrared spectroscopy, 1H NMR spectroscopy and mass spectrometry.The kinetics of ester hydrolysis was studied by HPLC at pH 2, pH 7.4 as well as in human plasma. The pharmacological activities (anti-inflammatory, analgesic and ulcerogenic) were evaluated for the synthesized drug. The ulcerogenic reduction in terms of gastric wall mucosa, hexosamine and total proteins were also measured in glandular stomach of rats. The results indicated that MA-P ester has better ulcer index than the parent drug.

Determination of nanostructure of liposomes containing two model drugs by X-ray scattering from a synchrotron source

Small-angle X-ray scattering has been employed to study how the introduction of paracetamol and acetylsalicylic acid into a liposome bilayer system affects the system's nanostructure. An X-ray scattering model, developed for multilamellar liposome systems [Pabst et al. (2000), Phys. Rev. E, 62, 4000-4009], has been used to fit the experimental data and to extract information on how structural parameters, such as the number and thickness of the bilayers of the liposomes, thickness of the water layer in between the bilayers, size and volume of the head and tail groups, are affected by the drugs and their concentration. Even though the experimental data reveal a complicated picture of the drug-bilayer interaction, they clearly show a correlation between nanostructure, drug and concentration in some aspects. The localization of the drugs in the bilayers is discussed.

Sensitivity-enhanced transmission Raman spectroscopy

Transmission Raman sensitivity for a representative commercial pharmaceutical tablet was increased by a factor of 40 using optics that returned lost laser and Raman photons to the tablet surface. A new achromatic one-way mirror is introduced that uses the spatial coherence of laser light to nondestructively force laser photons through the reflective tablet coating. Transmission Raman mapping and spatially offset Raman spectroscopy (SORS) mapping were developed and used to better understand the sensitivity-enhancement technology. Fundamental limitations of the sensitivity-enhancement approach are described and used to guide the design of the optics. The sensitivity-enhancement optics are compatible with commercial transmission Raman instruments.

Photo-regenerable multi-walled carbon nanotube membranes for the removal of pharmaceutical micropollutants from water

Pharmaceutical micropollutants fall in the category of "emerging contaminants" in water because of their prevalence and persistence in the aqueous environment, and because of a poor understanding of their low-dose exposure effects on human and animal populations. In this study, photo-regenerable multiwalled carbon nanotube membranes with variable water permeabilities were produced by embedding hierarchical TiO2 structures (having porous, spherical morphology) onto a pre-deposited bed of multi-walled carbon nanotubes (MWNTs) using a modified sol-gel technique. These MWNT-TiO2 composites and their constituent materials were characterized by analytical electron microscopy, surface charge measurement, thermogravimetric analysis, and hydrophobicity determination. The adsorption removal potential of MWNT-TiO2 membranes was demonstrated for three representative pharmaceuticals: acetaminophen, carbamazepine and ibuprofen. The peak initial removal percentages of the pharmaceuticals by the MWNT-TiO2 membranes were 80%, 45%, and 24% for carbamazepine, ibuprofen, and acetaminophen, respectively. The ability of the membranes to be regenerated, once they were saturated with the pharmaceutical compounds, was verified by repeating the adsorption removal experiment on the same membranes after exposure to UV light at 254 nm. Peak removal efficiencies after regeneration were 55%, 32%, and 19% for carbamazepine, ibuprofen, and acetaminophen, respectively, indicating some loss in sorptive capacity upon regeneration. Furthermore, the effect of pH on adsorption of ibuprofen, the pharmaceutical that attained the highest mass loading on the sorbent at equilibrium saturation, was studied and its mechanism of adsorption was proposed at pH below pKa.

Ultrasonic degradation of acetaminophen and naproxen in the presence of single-walled carbon nanotubes

Ultrasonic (US) and single-walled carbon nanotube (SWNT)-catalyzed ultrasonic (US/SWNT) degradation of a pharmaceutical (PhAC) mixture of acetaminophen (AAP) and naproxen (NPX) used as analgesics was carried out in water. In the absence of SWNTs, maximum degradations of AAP and NPX occurred at a high frequency (1000 kHz) and under acidic conditions (pH 3) and different solution temperatures (25 °C at 28 kHz and 35 °C at 1000 kHz) during US reactions. Rapid degradation of PhACs occurred within 10 min at 28 kHz (44.5% for AAP; 90.3% for NPX) and 1000 kHz (39.2% for AAP; 74.8% for NPX) at a SWNT concentration of 45 mgL(-1) under US/SWNT process, compared with 28 kHz (5.2% for AAP; 10.6% for NPX) and 1000 kHz (29.1% for AAP; 46.2% for NPX) under US process. Degradation was associated with the dispersion of SWNTs; small particles acted as nuclei during US reactions, enhancing the H2O2 production yield. NPX removal was greater than AAP removal under all US-induced reaction and SWNT adsorption conditions, which is governed by the chemical properties of PhACs. Based on the results, the optimal treatment performance was observed at 28 kHz with 45 mgL(-1) SWNTs (US/SWNT) within 10 min.

Optimizing the taste-masked formulation of acetaminophen using sodium caseinate and lecithin by experimental design

In a previous study of ours, the association of sodium caseinate and lecithin was demonstrated to be promising for masking the bitterness of acetaminophen via drug encapsulation. The encapsulating mechanisms were suggested to be based on the segregation of multicomponent droplets occurring during spray-drying. The spray-dried particles delayed the drug release within the mouth during the early time upon administration and hence masked the bitterness. Indeed, taste-masking is achieved if, within the frame of 1-2 min, drug substance is either not released or the released amount is below the human threshold for identifying its bad taste. The aim of this work was (i) to evaluate the effect of various processing and formulation parameters on the taste-masking efficiency and (ii) to determine the optimal formulation for optimal taste-masking effect. Four investigated input variables included inlet temperature (X1), spray flow (X2), sodium caseinate amount (X3) and lecithin amount (X4). The percentage of drug release amount during the first 2 min was considered as the response variable (Y). A 2(4)-full factorial design was applied and allowed screening for the most influential variables i.e. sodium caseinate amount and lecithin amount. Optimizing these two variables was therefore conducted by a simplex approach. The SEM and DSC results of spray-dried powder prepared under optimal conditions showed that drug seemed to be well encapsulated. The drug release during the first 2 min significantly decreased, 7-fold less than the unmasked drug particles. Therefore, the optimal formulation that performed the best taste-masking effect was successfully achieved.

Transformation of acetaminophen using manganese dioxide-mediated oxidative processes: reaction rates and pathways

This study investigates the oxidative transformation kinetics of acetaminophen (APAP) by δ-MnO2 under different conditions. APAP was rapidly oxidized by δ-MnO2 with the generation of Mn(2+). The measured APAP reaction rate considerably increased with an increase in initial δ-MnO2 and APAP concentration, but decreased as pH increased. The APAP reaction rate also increased with an increase in temperature. The addition of inorganic ions (Mn(2+), Ca(2+), and Fe(3+)) and substituted phenols (guaiacol, caffeic acid, and p-coumaric acid) as co-solutes remarkably decreased the transformation rate of APAP. The UV-Vis absorption spectra exhibited the π → π* transition, typical for aromatic rings. In addition, the intensity of the absorption peak gradually improved with increasing reaction time, suggesting that APAP can polymerize to form oligomers. Moreover, the secondary mass spectra of the dimers elucidated that the dimers were formed by the covalent bonding of phenol aromatic rings. Moreover, the higher-degree oligomers were formed by the coupling polymerization of phenolic and anilidic groups of dimers. These results are useful in understanding the fate of APAP in natural systems.

[Mechanism of catalytic ozonation for the degradation of paracetamol by activated carbon]

The degradation of paracetamol (APAP) in aqueous solution was studied with ozonation integrated with activated carbon (AC). The synergistic effect of ozonation/AC process was explored by comparing the degradation efficiency of APAP in three processes (ozonation alone, activated carbon alone and ozonation integrated with activated carbon). The operational parameters that affected the reaction rate were carefully optimized. Based on the intermediates detected, the possible pathway for catalytic degradation was discussed and the reaction mechanism was also investigated. The results showed that the TOC removal reached 55.11% at 60 min in the AC/O3 system, and was significantly better than the sum of ozonation alone (20.22%) and activated carbon alone (27.39%), showing the great synergistic effect. And the BOD5/COD ratio increased from 0.086 (before reaction) to 0.543 (after reaction), indicating that the biodegradability was also greatly improved. The effects of the initial concentration of APAP, pH value, ozone dosage and AC dosage on the variation of reaction rate were carefully discussed. The catalytic reaction mechanism was different at different pH values: the organic pollutions were removed by adsorption and direct ozone oxidation at acidic pH, and mainly by catalytic ozonation at alkaline pH.

Templated nucleation of acetaminophen on spherical excipient agglomerates

We investigated the effect of spherical agglomeration of heterogeneous crystalline substrates on the nucleation of acetaminophen (AAP). Optical and electron microscopy showed that the surface morphologies of single crystal triclinic lactose and D-mannitol differed significantly from their counterparts formed via spherical agglomeration. Spherical agglomerates of lactose were shown to enhance the nucleation rate of acetaminophen (AAP) by a factor of 11 compared to single crystal lactose; however, no such enhancement was observed for D-mannitol. X-ray powder diffraction identified the presence of new crystal faces of lactose present only in the spherical agglomerates However, D-mannitol did not show any significant change in crystal morphology. The new crystal faces of triclinic lactose were analyzed using geometric lattice matching software and molecular dynamics simulations to establish any new and significant epitaxial matches between lactose and AAP. A coincident lattice match and a large favorable energy interaction from hydrogen bonding were observed between the (141¯) and (001) crystal faces of lactose and AAP, respectively. The enhanced nucleation kinetics, X-ray data, and computational studies indicated that the spherical crystallization of lactose exposed the (141¯) face on the surface of the agglomerates, which subsequently enhanced the nucleation rate of AAP through geometric lattice matching and molecular functionality. This study highlights the importance of exploring different heterogeneous substrate morphologies for enhancing nucleation kinetics.

Application of Carbopol/PVP interpolymer complex to prepare mucoadhesive floating granule

Novel mucoadhesive floating granule was prepared using Carbopol/PVP interpolymer complex to deliver hydrophilic drugs in a controlled manner. Acetaminophen was used as a model drug. Maximum floatability of the granules was obtained at the ratio of 1/1, where 95 % of the granules floated for 12 h. As the concentration of sodium bicarbonate increased, both the floating duration and the release rate of the drug increased. The granules without sodium bicarbonate floated only for 2 h and floating onset time was 15 min. The release rate of drug gradually increased as the drug content in the granule increased. As the drug content in the granules increased, duration of adhesion decreased. However, the decrease in adhesion duration was minimal up to 40 % of drug content. The release rate from the granules prepared by dry granulation method was faster than that by wet granulation. The granules prepared by dry granulation method led to formation of highly porous structure; whereas, that by wet granulation method showed non-porous structure. The optimum size of the granules to retard the release of the model drug was within the range of 3-4 mm. Based on both mucoadhesive and buoyant properties, the floating granules are expected to reside in the upper part of the stomach for sufficient period of time and release the drug in a sustained manner.

Evaluation of the suspending properties of two local Opuntia spp. mucilages on paracetamol suspension

Some excipients are currently available for the formulation of pharmaceutical suspensions. The purpose of this study is to develop cheap and effective natural excipient that can be used as an effective alternative for the formulation of pharmaceutical suspensions. The suspending properties of Opuntia ficus-indica and Opuntia stricta mucilages (family Cactaceae) were evaluated comparatively with that of NaCMC at concentration range of 2-6% (w/v) in Paracetamol suspension. Sedimentation volume (%) (with and without electrolyte), rheology, redispersibility, and dissolution rate of the suspensions were employed as evaluation parameters. The values obtained were used as basis for comparison of the suspending agents. The apparent viscosities of the suspensions in all the suspending agents concentration levels and applied shear rates were in the order of NaCMC>OS>OFI with non-Newtonian flow and accordingly the flow rates of the suspensions were in the order of OFI > OS > NaCMC. The sedimentation volumes (%) of the suspensions in all the suspending agent concentration levels were higher for OS followed by OFI and then NaCMC. The high sedimentation volumes (%) of suspensions, in turn, were accompanied by ease of redispersibility of that order. The effect of electrolyte on sedimentation volume (%) had dual effect. It was only the suspensions that had NaCMC that showed increase in sedimentation volume (%) in all molar NaCl concentration. However, in suspensions that had mucilages of OS and OFI, an initial increase in sediment volumes (%) were accompanied by decrease after 1x10(-3)M and 1x10(-2)M of NaCl, respectively. Dissolution of the suspensions which had mucilages attained the acceptable ranges (> 80% drug release in 30 min) in 5 min. Similarly, except A6 formulations A2, A3, A4 and A5 have attained the limit but the release was not as quick as the previous formulations. Hence, it can be concluded that mucilages of Opuntia spp. (Opuntia ficus-indica and Opuntia stricta) can be used as alternatives to NaCMC as suspending agent in suspension formulations.

Kinetics of acetaminophen degradation by Fenton oxidation in a fluidized-bed reactor

Acetaminophen (ACT), an analgesic and antipyretic substance, is one of the most commonly detected pharmaceutical compound in surface waters and wastewaters. In this study, fluidized-bed Fenton (FB-Fenton) was used to decompose ACT into its final degradation products. The 1.45-L cylindrical glass reactor had inlet, outlet and recirculating sections. SiO(2) carrier particles were supported by glass beads with 2-4 mm in diameter. ACT concentration was determined by high performance liquid chromatography (HPLC). During the first 40 min of reaction, a fast initial ACT removal was observed and the "two-stage" ACT degradation conformed to a pseudo reaction kinetics. The effects of ferrous ion dosage and [Fe(2+)]/[H(2)O(2)] (FH ratio) were integrated into the derived pseudo second-order kinetic model. A reaction pathway was proposed based on the intermediates detected through SPME/GC-MS. The aromatic intermediates identified were hydroquinone, benzaldehydes and benzoic acids while the non-aromatic substances include alcohols, ketones, aldehydes and carboxylic acids. Rapid initial ACT degradation rate can be accomplished by high initial ferrous ion concentration and/or low FH ratio.