76
|
Nda-Umar UI, Ramli I, Muhamad EN, Azri N, Taufiq-Yap YH. Optimization and Characterization of Mesoporous Sulfonated Carbon Catalyst and Its Application in Modeling and Optimization of Acetin Production. Molecules 2020; 25:molecules25225221. [PMID: 33182532 PMCID: PMC7697787 DOI: 10.3390/molecules25225221] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/24/2020] [Revised: 10/30/2020] [Accepted: 10/31/2020] [Indexed: 11/16/2022] Open
Abstract
In this study, an optimized mesoporous sulfonated carbon (OMSC) catalyst derived from palm kernel shell biomass was developed using template carbonization and subsequent sulfonation under different temperatures and time conditions. The OMSC catalyst was characterized using acid-base titration, elemental analysis, XRD, Raman, FTIR, XPS, TPD-NH3, TGA-DTA, SEM, and N2 adsorption–desorption analysis to reveal its properties. Results proved that the OMSC catalyst is mesoporous and amorphous in structure with improved textural, acidic, and thermal properties. Both FTIR and XPS confirmed the presence of -SO3H, -OH, and -COOH functional groups on the surface of the catalyst. The OMSC catalyst was found to be efficient in catalyzing glycerol conversion to acetin via an acetylation reaction with acetic acid within a short period of 3 h. Response surface methodology (RSM), based on a two-level, three-factor, face-centered central composite design, was used to optimize the reaction conditions. The results showed that the optimized temperature, glycerol-to-acetic acid mole ratio, and catalyst load were 126 °C, 1:10.4, and 0.45 g, respectively. Under these optimum conditions, 97% glycerol conversion (GC) and selectivities of 4.9, 27.8, and 66.5% monoacetin (MA), diacetin (DA), and triacetin (TA), respectively, were achieved and found to be close to the predicted values. Statistical analysis showed that the regression model, as well as the model terms, were significant with the predicted R2 in reasonable agreement with the adjusted R2 (<0.2). The OMSC catalyst maintained excellent performance in GC for the five reaction cycles. The selectivity to TA, the most valuable product, was not stable until the fourth cycle, attributable to the leaching of the acid sites.
Collapse
|
77
|
Rathnayake D, Perera I, Shirazi-Amin A, Kerns P, Dissanayake S, Suib SL. Mesoporous Crystalline Niobium Oxide with a High Surface Area: A Solid Acid Catalyst for Alkyne Hydration. ACS APPLIED MATERIALS & INTERFACES 2020; 12:47389-47396. [PMID: 32962347 DOI: 10.1021/acsami.0c10757] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
A mesoporous crystalline niobium oxide with tunable pore sizes was synthesized via the sol-gel-based inverse micelle method. The material shows a surface area of 127 m2/g, which is the highest surface area reported so far for crystalline niobium oxide synthesized by soft template methods. The material also has a monomodal pore size distribution with an average pore diameter of 5.6 nm. A comprehensive characterization of niobium oxide was performed using powder X-ray diffraction, Brunauer-Emmett-Teller, thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, UV-vis, and X-ray photoelectron spectroscopy. The material acts as an environmentally friendly, solid acid catalyst toward hydration of alkynes under with excellent catalytic activity (99% conversion, 99% selectivity, and 4.39 h-1 TOF). Brønsted acid sites present in the catalyst were found to be responsible for the high catalytic activity. The catalyst was reusable up to five cycles without a significant loss of the activity.
Collapse
|
78
|
Wang J, Zhou J, Xu D, Li J, Deng D. Tailoring Viruslike Mesoporous FeSe 2 Hedgehogs for Controlled Drug Delivery and Synergistic Tumor Suppression. ACS APPLIED MATERIALS & INTERFACES 2020; 12:47197-47207. [PMID: 32993290 DOI: 10.1021/acsami.0c10888] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
To enhance affinity to their hosts, many organisms have evolved to be spiky. This strategy has been inspiring in many fields, but in drug delivery, the feasibility has not yet been extensively explored due to the lack of suitable nanocarriers. Herein, viruslike mesoporous FeSe2 hedgehogs with exceptional photothermal and catalytic performances have been tailored and explored for synergistic tumor therapy. The viruslike topology makes these hedgehogs highly prone to be internalized by cells. By uploading doxorubicin (Dox) into the hollow spikes and encapsulating the hedgehogs with photothermal-meltable gelatin, controlled surface morphology transition from quasi-spherical to spiky and accompanied Dox release have been achieved, with the assistance of the strong photothermal effect of FeSe2 hedgehogs. These integrated features allow specific and controlled drug delivery, leading to synergistic tumor suppression and immunogenic tumor cell death. These results provide new insights into the tailoring of drug carriers relying on their intrinsic physical features.
Collapse
|
79
|
Sharma J, Polizos G. Hollow Silica Particles: Recent Progress and Future Perspectives. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E1599. [PMID: 32823994 PMCID: PMC7466709 DOI: 10.3390/nano10081599] [Citation(s) in RCA: 28] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/17/2020] [Revised: 08/11/2020] [Accepted: 08/12/2020] [Indexed: 01/17/2023]
Abstract
Hollow silica particles (or mesoporous hollow silica particles) are sought after for applications across several fields, including drug delivery, battery anodes, catalysis, thermal insulation, and functional coatings. Significant progress has been made in hollow silica particle synthesis and several new methods are being explored to use these particles in real-world applications. This review article presents a brief and critical discussion of synthesis strategies, characterization techniques, and current and possible future applications of these particles.
Collapse
|
80
|
Yamaguchi Y, Aono R, Hayashi E, Kamata K, Hara M. Template-Free Synthesis of Mesoporous β-MnO 2 Nanoparticles: Structure, Formation Mechanism, and Catalytic Properties. ACS APPLIED MATERIALS & INTERFACES 2020; 12:36004-36013. [PMID: 32805787 DOI: 10.1021/acsami.0c08043] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
Mesoporous β-MnO2 nanoparticles were synthesized by a template-free low-temperature crystallization of Mn4+ precursors (low-crystallinity layer-type Mn4+ oxide, c-distorted H+-birnessite) produced by the reaction of MnO4- and Mn2+. The Mn starting materials, pH of the reaction solution, and calcination temperatures significantly affect the crystal structure, surface area, porous structure, and morphology of the manganese oxides formed. The pH conditions during the precipitation of Mn4+ precursors are important for controlling the morphology and porous structure of β-MnO2. Nonrigid aggregates of platelike particles with slitlike pores (β-MnO2-1 and -2) were obtained from the combinations of NaMnO4/MnSO4 and NaMnO4/Mn(NO3)2, respectively. On the other hand, spherelike particles with ink-bottle shaped pores (β-MnO2-3) were formed in NaMnO4/Mn(OAc)2 with pH adjustment (pH 0.8). The specific surface areas for β-MnO2-1, -2, and -3 were much higher than those for nonporous β-MnO2 nanorods synthesized using a typical hydrothermal method (β-MnO2-HT). On the other hand, c-distorted H+-birnessite precursors with a high interlayer metal cation (Na+ and K+) content led to the formation of α-MnO2 with a 2 × 2 tunnel structure. These mesoporous β-MnO2 materials acted as effective heterogeneous catalysts for the aerobic oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) as a bioplastic monomer and for the transformation of aromatic alcohols to the corresponding aldehydes, where the catalytic activities of β-MnO2-1, -2, and -3 were approximately 1 order of magnitude higher than that of β-MnO2-HT. β-MnO2-3 exhibited higher catalytic activity (especially for larger molecules) than the other β-MnO2 materials, and this is likely attributed to the nanometer-sized spaces.
Collapse
|
81
|
Huang RA, Hu X, Guo Y, Wang J, Yang B. Highly Hierarchical Fibrillar Biogenic Silica with Mesoporous Structure Derived from the Perennial Plant Equisetum Fluviatile. ACS APPLIED MATERIALS & INTERFACES 2020; 12:35259-35265. [PMID: 32640154 DOI: 10.1021/acsami.0c10421] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
A new discovery of highly hierarchical fibrillar biogenic silica with mesoporous structure derived from the perennial plant Equisetum fluviatile was made. By removing the organic compounds through chemical and heat treatment, the biogenic silica skeleton can largely retained the original highly hierarchical structure of the plant stems. Infrared spectra, X-ray diffraction, and small-angle X-ray scattering, as well as nitrogen sorption analysis, were employed to characterize the crystalline phases, nanostructure, and porosity of the resulting material. Scanning electron microscopy and transmission electron microscopy investigation reveal that the biogenic silica are fibers with diameters of about 120-150 μm and lengths of more than a few centimeters. These fibers consist of smaller fasciculus with diameters of about 5-15 μm that are composed of three levels of particles with mass and surface fractal characteristics: primary particles on the order of 3-5 nm, secondary particles on the order of 9-12 nm, and tertiary particles on the order of 90-120 nm in size. It is also shown that the biogenic silica have mesoporous structure with an average pore size of 4-6 nm and a specific surface of 100-300 m2/g. Heat treatment at high temperature and residual K+ significantly affects the characteristics of the mesoporous structure of the biogenic silica, although it has little effect on the surface fractal structure of the secondary particles.
Collapse
|
82
|
Sompalli NK, Deivasigamani P. Structurally designed porous polymer monoliths as probe-anchoring templates as benign and fast responsive solid-state optical sensors for the sensing and recovery of copper ions. NANOTECHNOLOGY 2020; 31:414004. [PMID: 32554881 DOI: 10.1088/1361-6528/ab9e2a] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/04/2020] [Accepted: 06/18/2020] [Indexed: 06/11/2023]
Abstract
In this study, we report on the superior ion-capturing and sensing competence of a new breed of aqua-compatible solid-state ion-sensor using a structurally organized polymer monolith, for the ocular sensing of trace levels of divalent copper ions. The polymer monolithic template exhibits a single block framework with a uniform structural pattern and porous network that serves as an efficient host for the homogeneous probe anchoring, to constitute a renewable solid-state optical sensor. Here, a series of solid-state colorimetric Cu(II) sensors has been designed using three indigenously synthesized chelating probes (molecules) namely, 4-butyl-N-(2-(2,4-dinitrophenyl)hydrazine-1-carbonothioyl)benzamide (BNHCB), 2-(thiophen-2-ylmethylene)hydrazinen-1-carbothioamide (TMHCA), and 4-butylphenyl(diazenyl)-2-mercaptopyrimidine-4,6-diol (BDMPD). The polymer monoliths are characterized using various surface and structural analysis techniques such as HR-SEM, HR-TEM, XPS, XRD, FT-IR, EDAX, and BET surface area analysis. The fabricated solid-state sensors exhibit excellent selectivity and sensitivity for copper ions with unique color transitions that are reliable even at ultra-trace (ppb) levels. The impact of diverse sensing parameters such as solution pH, probe concentration, sensor quantity, target ion concentration, temperature, response kinetics, and matrix tolerances have been optimized. The fabricated sensor materials proffer maximum sensing efficiency in neutral pH conditions, with a limit of detection (LD) and quantification (LQ) values of 0.56 and 1.87μg l-1, 0.30 and 1.0μg l-1, and 0.12 and 0.42μg l-1, for BNHCB-, BDMPD-, and TMHCA-anchored polymer sensors, respectively. The proposed reusable solid-state colorimetric sensors are environmentally benign, cost-effective and data reproducible, with superior analytical performance.
Collapse
|
83
|
Mosa J, Aparicio M. Sol-Gel Synthesis of Nanocrystalline Mesoporous Li 4Ti 5O 12 Thin-Films as Anodes for Li-Ion Microbatteries. NANOMATERIALS 2020; 10:nano10071369. [PMID: 32674300 PMCID: PMC7408516 DOI: 10.3390/nano10071369] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/08/2020] [Revised: 07/07/2020] [Accepted: 07/09/2020] [Indexed: 11/16/2022]
Abstract
The development of anodes based on Li4Ti5O12 (LTO) for lithium ion batteries has become very important in recent years on the basis that it allows a long service life (stability in charge-discharge cycling) and safety improvements. The processing of this material in the form of thin film allows for greater control of its characteristics and an improvement of its disadvantages, namely reduced electrical conductivity and low diffusion of lithium ions. In this work, we try to limit these disadvantages through the synthesis of a mesostructured carbon-doped Li4Ti5O12 thin-film with a pure spinel phase using a combination of a block-copolymer template and in situ synthesis of Li-Ti double alkoxide. Structural and electrochemical characterization has been carried out to determine the best conditions (temperature, time, atmosphere) for the thermal treatment of the material to reach a compromise between crystallinity and porosity distribution (pore size, pore volume, and interconnectivity).
Collapse
|
84
|
Chen L, Meng X, Liu M, Lv R, Cai B, Wang Z. Biodegradable Mesoporous Organosilica Nanosheets for Chemotherapy/Mild Thermotherapy of Cancer: Fast Internalization, High Cellular Uptake, and High Drug Loading. ACS APPLIED MATERIALS & INTERFACES 2020; 12:30234-30246. [PMID: 32525649 DOI: 10.1021/acsami.0c09735] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
The choice of nanocarriers is crucial to fabricate ideal therapeutic nanoplatform in the treatment of cancer. Considering the advantages brought by the two-dimensional (2D) materials with atomic thickness in drug loading and cellular uptake, herein, novel 2D biodegradable mesoporous organosilica nanosheets (MONSs) are presented, and their application in chemotherapy/mild thermotherapy of cancer is studied by loading chemotherapy drug doxorubicin (DOX) and conjugating ultrasmall CuS nanoparticles. It is found that the loading of DOX in MONSs is as high as 859 μg/mg due to their large surface area and intermediate void structure. The release of DOX from MONSs is intelligently controlled by pH value, glutathione (GSH) concentration, and laser irradiation. Excitingly, in comparison with traditional spherical mesoporous organosilica nanoparticles, as-prepared MONSs not only show more rapid degradation but also exhibit faster internalization and higher cellular uptake efficiency due to their larger aspect ratios and unique cellular internalization approach of 2D materials. A mild thermotherapy induced by ultrasmall CuS nanoparticles can further promote the cellular uptake and improve chemotherapy efficacy. The in vitro and in vivo experimental results reveal that the theranostic nanoplatform based on degradable MONSs has excellent biocompatibility and anticancer effects. Therefore, MONSs are expected to be a competitive alternative to existing silica-based nanomaterials in antitumor treatment.
Collapse
|
85
|
Niuniavaite D, Baltakys K, Dambrauskas T, Eisinas A, Rubinaite D, Jaskunas A. Microstructure, Thermal Stability, and Catalytic Activity of Compounds Formed in CaO-SiO 2-Cr(NO 3) 3-H 2O System. NANOMATERIALS (BASEL, SWITZERLAND) 2020; 10:E1299. [PMID: 32630781 PMCID: PMC7407582 DOI: 10.3390/nano10071299] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/28/2020] [Revised: 06/19/2020] [Accepted: 06/29/2020] [Indexed: 11/30/2022]
Abstract
In this work, the thermal stability, microstructure, and catalytic activity in oxidation reactions of calcium silicate hydrates formed in the CaO-SiO2-Cr(NO3)3-H2O system under hydrothermal conditions were examined in detail. Dry primary mixture with a molar ratio of CaO/SiO2 = 1.5 was mixed with Cr(NO3)3 solution (c = 10 g Cr3+/dm3) to reach a solution/solid ratio of the suspension of 10.0:1. Hydrothermal synthesis was carried out in unstirred suspensions at 175 °C for 16 h. It was determined that, after treatment, semicrystalline calcium silicate hydrates C-S-H(I) and/or C-S-H(II) with incorporated Cr3+ ions (100 mg/g) were formed. The results of in situ X-ray diffraction and simultaneous thermal analyses showed that the products were stable until 500 °C, while, at higher temperatures, they recrystallized to calcium chromate (CaCrO4, 550 °C) and wollastonite (800-850 °C). It was determined that both the surface area and the shape of the dominant pore changed during calcination. Propanol oxidation experiments showed that synthetic semicrystalline calcium silicate hydrates with intercalated chromium ions are able to exchange oxygen during the heterogeneous oxidation process. The obtained results were confirmed by XRD, STA, FT-IR, TEM, SEM, and BET methods, and by propanol oxidation experiments.
Collapse
|
86
|
Karamikamkar S, Fashandi M, Naguib HE, Park CB. In Situ Interface Design in Graphene-Embedded Polymeric Silica Aerogel with Organic/Inorganic Hybridization. ACS APPLIED MATERIALS & INTERFACES 2020; 12:26635-26648. [PMID: 32352754 DOI: 10.1021/acsami.0c04531] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
For many practical applications, the most important factor is to have an improved interface between the matrix and dispersed phase in a compressible composite aerogel having a high degree of porosity and a large surface area. Although some measure of compressibility is obtained in polymer-based aerogels with a continuous backbone through the hybridization of the stiff backbone [polyvinyltrimethoxysilane (P-VTMS), -C-C-] and flexible backbone [poly(3-glycidyloxypropyl)trimethoxysilane (P-GPTMS), -C-O-C-], it seems that the extent of improvement is insignificant in terms of interface improvement, surface area increase, and ordered mesoporous network. In this study, the effects of the incorporation of graphene nanoplatelets (GnPs) on aerogels made of a backbone consisting of -C-O-C- (flexible backbone) were examined in terms of structural improvement and were compared with aerogels made of a backbone consisting of -C-C- (stiff backbone). Moreover, the inorganic siloxane cross-link density between the underlying polymer chains was controlled by inducing hydrogen bonding between polymer chains and GnPs. This approach reduces the structural shrinkage during gelation and drying. The integration of only 1 wt % GnP integrated into the backbone by using spinodal decomposition phase separation processing allowed control of the pore size and the surface area. Integration of GnPs through in situ exfoliation during sol-gel transition is shown to be the best approach using the lowest possible amount of GnPs to improve aerogels' mesoporous network made from polymerized GPTMS. A flexible backbone such as P-GPTMS chains is supposed to result in a compliant aerogel, but the chains tend to shrink extensively during gelation and drying, reducing the porosity. P-GPTMS-derived aerogel suffers from a wrong combination of flexible backbone conjugated with an extensive number of permanent chemical cross-links and abundant remaining unreacted hydroxyl groups that undergo permanent chemical shrinkage. To counteract this, the GnP-reinforced prepolymer precursor (P-GPTMS) with fewer siloxane cross-links was synthesized and studied. By use of this strategy, the same elastic properties as those seen with the hybrid P-VTMS- and hybrid P-GPTMS-derived aerogels were imparted, while also improving the mechanical strength by up to 138% and the surface area by up to 205% by controlling the extent of GnP exfoliation during the sol-gel transition. This exceptional effect of GnP on the surface area improvement was shown to be of up to 2.05-fold for P-GPTMS and 2.63-fold for P-VTMS material.
Collapse
|
87
|
Díaz de Greñu B, de los Reyes R, Costero AM, Amorós P, Ros-Lis JV. Recent Progress of Microwave-Assisted Synthesis of Silica Materials. NANOMATERIALS 2020; 10:nano10061092. [PMID: 32492889 PMCID: PMC7353307 DOI: 10.3390/nano10061092] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/25/2020] [Revised: 05/14/2020] [Accepted: 05/25/2020] [Indexed: 12/02/2022]
Abstract
Microwaves are a source of energy of great interest for chemical synthesis. Among nanomaterials, few are as versatile as silica—it forms mesoporous materials and nanoparticles, it can be incorporated as shells or loaded in composites, it can also be functionalized. Despite the relevant properties of silica, and the advantages of the use of microwave as energy source, its use in silica-based materials is not frequent. We report herein a compilation of the research results published in the last 10 years of microwave assisted synthesis of silica based materials. This review includes examples of mesoporous materials for waste removal, catalysis, drug release, and gas adsorption applications, together with examples based in the optimization of the synthesis conditions. In the case of non-porous materials, examples of analytical applications, coating of metallic nanoparticles, and SiOx-C materials have been collected.
Collapse
|
88
|
Kesavan T, Partheeban T, Vivekanantha M, Prabu N, Kundu M, Selvarajan P, Umapathy S, Vinu A, Sasidharan M. Design of P-Doped Mesoporous Carbon Nitrides as High-Performance Anode Materials for Li-Ion Battery. ACS APPLIED MATERIALS & INTERFACES 2020; 12:24007-24018. [PMID: 32343554 DOI: 10.1021/acsami.0c05123] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/11/2023]
Abstract
Herein, we demonstrate a simple and unique strategy for the preparation of P-doped into the substructure of mesoporous carbon nitride materials (P-MCN-1) with ordered porous structures as a high-energy and high-power Li-ion battery (LIB) anode. The P-MCN-1 as an anode in LIB delivers a high reversible discharge capacity of 963 mAh g-1 even after 1000 cycles at a current density of 1 A g-1, which is much higher than that of other counterparts comprising s-triazine (C3H3N3, g-C3N4), pristine MCN-1, and B-containing MCN-1 (B-MCN-1) subunits or carbon allotropes like CNT and graphene (rGO) materials. The P-MCN-1 electrode also exhibits exceptional rate capability even at high current densities of 5, 10, and 20 A g-1 delivering 685, 539, and 274 mAh g-1, respectively, after 2500 cycles. The high electrical conductivity and Li-ion diffusivity (D), estimated from electrochemical impedance spectra (EIS), very well support the extraordinary electrochemical performance of the P-MCN-1. Higher formation energy, lower bandgap value, and high Li-ion adsorption ability predicted by first principle calculations of P-MCN-1 are in good agreement with experimentally observed high lithium storage, stable cycle life, high power capability, and minimal irreversible capacity (IRC) loss. To the best of our knowledge, it is an entirely new material with the combination of ordered mesostructures with P codoping in carbon nitride substructure which offers superior performance for LIB, and hence we believe that this work will create new momentum for the design and development of clean energy storage devices.
Collapse
|
89
|
Highly Efficient Mesoporous Core-Shell Structured Ag@SiO 2 Nanosphere as an Environmentally Friendly Catalyst for Hydrogenation of Nitrobenzene. NANOMATERIALS 2020; 10:nano10050883. [PMID: 32375276 PMCID: PMC7279246 DOI: 10.3390/nano10050883] [Citation(s) in RCA: 9] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/07/2020] [Revised: 04/29/2020] [Accepted: 05/01/2020] [Indexed: 12/14/2022]
Abstract
The size-uniformed mesoporous Ag@SiO2 nanospheres’ catalysts were prepared in one-pot step via reducing AgNO3 by different types of aldehyde, which could control the size of Ag@SiO2 NPs and exhibit excellent catalytic activity for the hydrogenation of nitrobenzene. The results showed that the Ag core size, monitored by different aldehydes with different reducing abilities, together with the ideal monodisperse core-shell mesoporous structure, was quite important to affect its superior catalytic performances. Moreover, the stability of Ag fixed in the core during reaction for 6 h under 2.0 MPa, 140 °C made this type of Ag@SiO2 catalyst separable and environmentally friendly compared with those conventional homogeneous catalysts and metal NPs catalysts. The best catalyst with smaller Ag cores was prepared by strong reducing agents such as CH2O. The conversion of nitrobenzene can reach 99.9%, the selectivity was 100% and the catalyst maintained its activity after several cycles, and thus, it is a useful novel candidate for the production of aniline.
Collapse
|
90
|
Guo Y, Tang J, Henzie J, Jiang B, Xia W, Chen T, Bando Y, Kang YM, Hossain MSA, Sugahara Y, Yamauchi Y. Mesoporous Iron-doped MoS 2/CoMo 2S 4 Heterostructures through Organic-Metal Cooperative Interactions on Spherical Micelles for Electrochemical Water Splitting. ACS NANO 2020; 14:4141-4152. [PMID: 32191030 DOI: 10.1021/acsnano.9b08904] [Citation(s) in RCA: 57] [Impact Index Per Article: 14.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Mesoporous metal sulfide hybrid (meso-MoS2/CoMo2S4) materials via a soft-templating approach using diblock copolymer polystyrene-block-poly(acrylic acid) micelles are reported. The formation of the meso-MoS2/CoMo2S4 heterostructures is based on the sophisticated coassembly of dithiooxamide and metal precursors (i.e., Co2+, PMo12), which are subsequently annealed in nitrogen atmosphere to generate the mesoporous material. Decomposing the polymer leaves behind mesopores throughout the spherical MoS2/CoMo2S4 hybrid particles, generating numerous electrochemical active sites in a network of pores that enable faster charge transfer and mass/gas diffusion that enhance the electrocatalytic performance of MoS2/CoMo2S4. Doping the spherical meso-MoS2/CoMo2S4 heterostructures with iron improves the electronic properties of the hybrid meso-Fe-MoS2/CoMo2S4 material and consequently results in its superior electrochemical activities for both hydrogen evolution reaction and oxygen evolution reaction.
Collapse
|
91
|
Wang L, Sun X. Mesoporous Silica Hybridized With Gadolinium(III) Nanoplatform for Targeted Magnetic Imaging-Guided Photothermal Breast Cancer Therapy. Dose Response 2020; 18:1559325820902314. [PMID: 32284692 PMCID: PMC7119237 DOI: 10.1177/1559325820902314] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/24/2019] [Revised: 12/25/2019] [Accepted: 12/31/2019] [Indexed: 12/29/2022] Open
Abstract
Achieving drug target accumulation in antitumor tissue, simultaneous diagnostic imaging, and optimal release behavior with treatment needs a best chemotherapy procedure involving receptive switch of drug delivery. Constructed on mesoporous silica nanoparticles, which are crossed with multiscale charming nanoparticles for magnetic resonance imaging (MRI)-aided and alternate magnetic field (AMF) response chemotherapy for breast cancer, we report in this work the assembly of a new theranostics drug conveyance process. Hydrothermal processes (gadolinium(III) oxide nanoparticles [Gd-NPs]) and heat decomposition process (radical size uFe-NPs) were used to prepare superparamagnetic Gd-NPs with multiscale sizes. Gadolinium(III) oxide nanoparticles act as an AMF-responsive heat mediator, while ultra-Fe nanoparticles (uFe-NPs) act as an MRI T2 contrast mediator. Nanoparticles of the mesoporous silica with radially oriented mesochannels were further grown in situ on the surfaces of the Gd-NPs, and the uFe-NPs anticancer drug doxorubicin can be easily incorporated in the mesochannels. To provide better targeting capabilities for the as-synthesized biotin-loaded nanohybrids, the particle surfaces are updated with biotin (Bt). This optimized drug conveyance method based on nanocomposites of SiO2 demonstrated great efficiency of medication charging and receptive properties of AMF stimulus release. However, tests of MRI in vitro showed an outstanding contrast effect in MRI with a high stimulation quality (299 mM−1 s−1). In contrast, the study of in vitro cytotoxicity assessment revealed that an MRI-directed stimulus-mediated theranostics tool can be used as a drug conveyance device to efficiently treat breast cancer.
Collapse
|
92
|
Baino F, Fiume E. 3D Printing of Hierarchical Scaffolds Based on Mesoporous Bioactive Glasses (MBGs)-Fundamentals and Applications. MATERIALS (BASEL, SWITZERLAND) 2020; 13:E1688. [PMID: 32260374 PMCID: PMC7178684 DOI: 10.3390/ma13071688] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/10/2020] [Revised: 03/23/2020] [Accepted: 04/02/2020] [Indexed: 11/30/2022]
Abstract
The advent of mesoporous bioactive glasses (MBGs) in applied bio-sciences led to the birth of a new class of nanostructured materials combining triple functionality, that is, bone-bonding capability, drug delivery and therapeutic ion release. However, the development of hierarchical three-dimensional (3D) scaffolds based on MBGs may be difficult due to some inherent drawbacks of MBGs (e.g., high brittleness) and technological challenges related to their fabrication in a multiscale porous form. For example, MBG-based scaffolds produced by conventional porogen-assisted methods exhibit a very low mechanical strength, making them unsuitable for clinical applications. The application of additive manufacturing techniques significantly improved the processing of these materials, making it easier preserving the textural and functional properties of MBGs and allowing stronger scaffolds to be produced. This review provides an overview of the major aspects relevant to 3D printing of MBGs, including technological issues and potential applications of final products in medicine.
Collapse
|
93
|
Paterson TE, Bari A, Bullock AJ, Turner R, Montalbano G, Fiorilli S, Vitale-Brovarone C, MacNeil S, Shepherd J. Multifunctional Copper-Containing Mesoporous Glass Nanoparticles as Antibacterial and Proangiogenic Agents for Chronic Wounds. Front Bioeng Biotechnol 2020; 8:246. [PMID: 32296691 PMCID: PMC7136418 DOI: 10.3389/fbioe.2020.00246] [Citation(s) in RCA: 29] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/28/2019] [Accepted: 03/10/2020] [Indexed: 01/15/2023] Open
Abstract
The physiological wound healing process involves a cascade of events which could be affected by several factors resulting in chronic, non-healing wounds. The latter represent a great burden especially when bacterial biofilms are formed. The rise in antibiotic resistance amongst infectious microorganisms leads to the need of novel approaches to treat this clinical issue. In this context, the use of advanced biomaterials, which can enhance the physiological expression and secretion of the growth factors involved in the wound healing process, is gaining increasing attention as a robust and appealing alternative approach. Among them, mesoporous glasses are of particular interest due to their excellent textural properties and to the possibility of incorporating and releasing specific therapeutic species, such as metallic ions. One of the most attractive therapeutic ions is copper thanks to its proangiogenic and antibacterial effects. In this contribution, copper containing mesoporous glass nanoparticles were proposed as a multifunctional device to treat chronic wounds. The developed nanoparticles evidenced a very high specific surface area (740 m2/g), uniform pores of 4 nm and an almost total release of the therapeutic ion within 72 h of soaking. The produced nanoparticles were biocompatible and, when tested against Gram positive and Gram negative bacterial species, demonstrated antibacterial activity against both planktonic and biofilm bacteria in 2D cell monolayers, and in a 3D human model of infected skin. Their proangiogenic effect was tested with both the aortic ring and the chick chorioallantoic membrane assays and an increase in endothelial cell outgrowth at a concentration range between 30 and 300 ng/mL was shown. Overall, in this study biocompatible, multifunctional Cu-containing mesoporous glass nanoparticles were successfully produced and demonstrated to exert both antibacterial and proangiogenic effects.
Collapse
|
94
|
Huang X, Townley HE. An Assessment of Mesoporous Silica Nanoparticle Architectures as Antigen Carriers. Pharmaceutics 2020; 12:E294. [PMID: 32213995 PMCID: PMC7151194 DOI: 10.3390/pharmaceutics12030294] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/11/2020] [Revised: 03/19/2020] [Accepted: 03/20/2020] [Indexed: 12/25/2022] Open
Abstract
Mesoporous silica nanoparticles (MSNPs) have the potential to be used as antigen carriers due to their high surface areas and highly ordered pore network. We investigated the adsorption and desorption of diphtheria toxoid as a proof-of-concept. Two series of nanoparticles were prepared-(i) small pores (SP) (<10 nm) and (ii) large pores (LP) (>10 nm). SBA-15 was included as a comparison since this is commercially available and has been used in a large number of studies. External diameters of the particles ranged from 138 to 1509 nm, surface area from 632 to 1110 m2/g and pore size from 2.59 to 16.48 nm. Antigen loading was assessed at a number of different ratios of silica-to-antigen and at 4 °C, 20 °C and 37 °C. Our data showed that protein adsorption by the SP series was in general consistently lower than that shown by the large pore series. Unloading was then examined at 4 °C, 20 °C and 37 °C and a pH 1.2, 4.5, 6.8 and 7.4. There was a trend amongst the LP particles towards the smallest pores showing the lowest release of antigen. The stability of the MSNP: antigen complex was tested at two different storage temperatures, and storage in solution or after lyophilization. After 6 months there was negligible release from any of the particles under any of the storage conditions. The particles were also shown not to cause hemolysis.
Collapse
|
95
|
Ramadass K, Sathish CI, MariaRuban S, Kothandam G, Joseph S, Singh G, Kim S, Cha W, Karakoti A, Belperio T, Yi JB, Vinu A. Carbon Nanoflakes and Nanotubes from Halloysite Nanoclays and their Superior Performance in CO 2 Capture and Energy Storage. ACS APPLIED MATERIALS & INTERFACES 2020; 12:11922-11933. [PMID: 32067462 DOI: 10.1021/acsami.9b21510] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Nanoporous carbon (HNC) with a flake and nanotubular morphology and a high specific surface area is prepared by using natural halloysite nanotubes (HNTs), a low-cost and naturally available clay material with a mixture of flaky and tubular morphology. A controlled pore-filling technique is used to selectively control the porosity, morphology, and the specific surface area of the HNC. Activated nanoporous carbon (AHNC) with a high specific surface area is also prepared by using HNT together with the activation process with zinc chloride (ZnCl2). HNC exhibits flakes and tubular morphologies, which offer a high specific surface area (837 m2/g). The specific surface area of AHNC is 1646 m2/g, 74 times greater than the specific surface area of pure HNT (22.5 m2/g). These data revealed that the single-step activation combined with the nanotemplating results in creating a huge impact on the specific surface area of the HNC. Both HNC and AHNC are employed as adsorbents for CO2 adsorption at different pressures and adsorption temperatures. The CO2 adsorption capacity of AHNC is 25.7 mmol/g at 0 °C, which is found to be significantly higher than that of activated carbon (AC), mesoporous carbon (CMK-3), mesoporous carbon nitride (MCN-1), and multiwalled carbon nanotube (MWCNT). AHNC is also tested as an electroactive material and demonstrates good supercapacitance, cyclic stability, and high capacitance retention. Specific capacitance of AHNC in the aqueous electrolyte is 197 F/g at 0.3 A/g, which is higher than that of AC, MWCNT, and CMK-3. The technique adopted for the preparation of both HNC and AHNC is quite unique and simple, has the potential to replace the existing highly expensive and sophisticated mesoporous silica-based nanotemplating strategy, and could also be applied for the fabrication of series of advanced nanostructures with unique functionalities.
Collapse
|
96
|
A Structural Comparison of Ordered and Non-Ordered Ion Doped Silicate Bioactive Glasses. MATERIALS 2020; 13:ma13040992. [PMID: 32098427 PMCID: PMC7078819 DOI: 10.3390/ma13040992] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/21/2020] [Revised: 02/20/2020] [Accepted: 02/20/2020] [Indexed: 11/17/2022]
Abstract
One of the key benefits of sol-gel-derived glasses is the presence of a mesoporous structure and the resulting increase in surface area. This enhancement in textural properties has a significant effect on the physicochemical properties of the materials. In this context the aim of this study was to investigate how sol-gel synthesis parameters can influence the textural and structural properties of mesoporous silicate glasses. We report the synthesis and characterization of metal ion doped sol-gel derived glasses with different dopants in the presence or absence of a surfactant (Pluronic P123) used as structure-directing templating agent. Characterization was done by several methods. Using a structure directing agent led to larger surface areas and highly ordered mesoporous structures. The chemical structure of the non-ordered glasses was modified to a larger extent than the one of the ordered glasses due to increased incorporation of dopant ions into the glass network. The results will help to further understand how the properties of sol-gel glasses can be controlled by incorporation of metal dopants, in conjunction with control over the textural properties, and will be important to optimize the properties of sol-gel glasses for specific applications, e.g., drug delivery, bone regeneration, wound healing, and antibacterial materials.
Collapse
|
97
|
Thalgaspitiya WRK, Kapuge TK, He J, Rathnayake D, Kerns P, Suib SL. Mesoporous Molybdenum-Tungsten Mixed Metal Oxide: A Solid Acid Catalyst for Green, Highly Efficient sp 3-sp 2 C-C Coupling Reactions. ACS APPLIED MATERIALS & INTERFACES 2020; 12:5990-5998. [PMID: 31917542 DOI: 10.1021/acsami.9b21633] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
A mesoporous molybdenum tungsten mixed metal oxide with high surface area (173 m2/g) was synthesized by using metal dissolution coupled with a surfactant assisted reverse micelle formation synthesis method. Comprehensive characterization of the mixed oxide was performed by using PXRD, Raman, BET, SEM, EDX, TEM, and XPS. Thus, the formation of α-Mo0.5W0.5O3 with a homogeneous distribution of Mo and W throughout the material was seen. Furthermore, multiple oxidation states of molybdenum (Mo6+ and Mo5+) and a single oxidation state of tungsten (W6+) were observed. The weak/moderate acidic sites present in the mixed metal oxide resulted in excellent catalytic properties toward the sp3-sp2 carbon-carbon coupling reactions. The coupling of benzyl alcohol and toluene was completed within 15 min at 110 °C with 99% yield.
Collapse
|
98
|
Alvarez-Fernandez A, Reid B, Fornerod MJ, Taylor A, Divitini G, Guldin S. Structural Characterization of Mesoporous Thin Film Architectures: A Tutorial Overview. ACS APPLIED MATERIALS & INTERFACES 2020; 12:5195-5208. [PMID: 31961128 DOI: 10.1021/acsami.9b17899] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
Mesoporous thin film architectures are an important class of materials that exhibit unique properties, which include high surface area, versatile surface functionalization, and bicontinuous percolation paths through a broad library of pore arrangements on the 10 nm length scale. Although porosimetry of bulk materials via sorption techniques is common practice, the characterization of thin mesoporous films with small sample volumes remains a challenge. A range of techniques are geared toward providing information over pore morphology, pore size distribution, surface area and overall porosity, but none of them offers a holistic evaluation and results are at times inconsistent. In this work, we present a tutorial overview for the reliable structural characterization of mesoporous films. Three model samples with variable pore size and porosity prepared by block copolymer (BCP) coassembly serve for a rational comparison. Various techniques are assessed side-by-side, including scanning electron microscopy (SEM), atomic force microscopy (AFM), grazing incidence small-angle X-ray scattering (GISAXS), and ellipsometric porosimetry (EP). We critically discuss advantages and limitations of each technique and provide guidelines for reliable implementation.
Collapse
|
99
|
Rajasekharan AK, Gyllensten C, Blomstrand E, Liebi M, Andersson M. Tough Ordered Mesoporous Elastomeric Biomaterials Formed at Ambient Conditions. ACS NANO 2020; 14:241-254. [PMID: 31846286 DOI: 10.1021/acsnano.9b01924] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Synthetic dry elastomers are randomly cross-linked polymeric networks with isotropic and unordered higher-level structural features. However, their growing use as soft-tissue biomaterials has demanded the need for an ordered and anisotropic nano-micro (or) mesoarchitecture, which is crucial for imparting specific properties such as hierarchical toughening, anisotropic mechanics, sustained drug delivery, and directed tissue growth. High processing cost, poor control in 3D, and compromised mechanical properties have made it difficult to synthesize tough and dry macroscopic elastomers with well-organized nano-microstructures. Inspired from biological design principles, we report a tough ordered mesoporous elastomer formed via bottom-up lyotropic self-assembly of noncytotoxic, polymerizable amphiphilic triblock copolymers and hydrophobic polymers. The elastomer is cross-linked using covalent cross-links and physical hydrophobic entanglements that are organized in a periodic manner at the nanoscale. This transforms into a well-ordered hexagonal arrangement of nanofibrils that are highly oriented at the micron scale, further organized as 3D macroscale objects. The ordered nano-microstructure and molecular multinetwork endows the elastomer with hierarchical toughening while possessing excellent stiffness and elongation comparable to engineering elastomers like silicone and vulcanized rubber. Processing of the elastomer is performed at ambient conditions using 3D printing and photo-cross-linking, which is fast and energy efficient and enables production of complex 3D objects with tailorable sub-millimeter features such as macroporosity. Furthermore, the periodic and amphiphilic nanostructure permits functionalization of the elastomer with secondary components such as inorganic nanoparticles or drug molecules, enabling complementary mechanical properties such as high stiffness and functional capabilities such as in localized drug delivery applications.
Collapse
|
100
|
Nejadshafiee V, Naeimi H. Molecular Ionic Liquid Supported on Mesoporous Silica Nanoparticles-Imprinted Iron Metal: A Recyclable Heterogeneous Catalyst for One-Pot, Three-Component Synthesis of a Library of Benzodiazepines. Curr Org Synth 2020; 16:136-144. [PMID: 31965927 DOI: 10.2174/1570179415666181031123504] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/05/2017] [Revised: 09/17/2018] [Accepted: 10/12/2018] [Indexed: 11/22/2022]
Abstract
AIM AND OBJECTIVE A novel and convenient transformation for the synthesis of benzodiazepines has been developed via catalytic cyclization reaction using ionic liquid supported on mesoporous silica nanoparticles- imprinted iron metal (Fe-MCM-41-IL) as a recyclable catalyst under mild conditions. MATERIALS AND METHODS For preparation of Fe-MCM-41-IL, FeCl3·6H2O was added to a mixture of distilled water, CTAB and NaOH aqueous solution. The tetraethyl orthosilicate was dropped into the solution under stirring. The product was separated, washed, and dried. The solid product was collected and calcined. Then, to a solution of β-hydroxy-1,2,3-triazole in toluene, 3-chloropropyltrimethoxysilane was added and the mixture was refluxed. The Conc. H2SO4 was added dropwise into the above solution and stirred. For immobilization of IL onto Fe-MCM-41, the solution IL was added to Fe-MCM-41 and was refluxed for the production of the Fe- MCM-41. Following this, benzodiazepines were synthesized using Fe-MCM-41-IL as a catalyst. RESULTS The Fe-MCM-41-IL was prepared and characterized by a different analysis. The activity of the prepared catalyst as the above described was tested in the model reaction of o-phenyldiamine, tetronic acid, and different aldehydes under room temperature in ethanol solvent. Also, the catalyst could be recovered for five cycles. CONCLUSION We developed a novel nanocatalyst for the synthesis of benzodiazepines in excellent yields. Fe- MCM-41-IL as a catalyst has advantages such as: environmental friendliness, reusability and easy recovery of the catalyst using an external magnet.
Collapse
|