3D-printed personalised prostheses for bone defect repair and reconstruction following resection of metacarpal giant cell tumours

Background

Conventional surgical treatment for metacarpal giant cell tumours (GCTs) includes lesion scraping followed by bone grafting or bone cement filling and en bloc resection followed by repair and reconstruction using a vascularised bone flap. However, these methods have inherent shortcomings, including a high postoperative recurrence rate and poor mechanical stability. 3D-printing techniques are increasingly being applied in medicine, and 3D-printed personalised prostheses have achieved good clinical effects in orthopaedic repair and reconstruction. We aimed to investigate the clinical effects of 3D-printed personalised prostheses for bone defect repair and reconstruction following resection of metacarpal GCTs.

Methods

Three patients with metacarpal GCTs were examined in a retrospective cohort study. Through preoperative planning, a 3D-printed personalised prosthesis was designed and created for bone defect repair and reconstruction after tumour resection. Prosthesis fit, limb function, pain on the affected side, and the occurrence of complications were evaluated postoperatively.

Results

Postoperative X-ray examination revealed a satisfactory fit of the 3D-printed prosthesis in terms of bone defect size and overall metacarpal shape, as well as good transverse and longitudinal metacarpal arches. The patients also exhibited good function in the affected limb, with good flexion and extension functions in the carpal, metacarpophalangeal, and interphalangeal joints, plus the absence of obvious pain, tumour recurrence, and complications such as pathologic fractures and prosthetic loosening.

Conclusions

When using a 3D-printed personalised prosthesis for bone defect repair and reconstruction following resection of metacarpal GCTs, a good fit with the bone defect can be achieved during prosthetic installation when preoperative planning and design have been adequately performed. Therefore, three-dimensionally printed personalised prostheses can serve as an effective method for the treatment of metacarpal GCTs.

Autism spectrum disorder diagnosis using graph attention network based on spatial-constrained sparse functional brain networks

The accurate diagnosis of autism spectrum disorder (ASD), a common mental disease in children, has always been an important task in clinical practice. In recent years, the use of graph neural network (GNN) based on functional brain network (FBN) has shown powerful performance for disease diagnosis. The challenge to construct "ideal" FBN from resting-state fMRI data remained. Moreover, it remains unclear whether and to what extent the non-Euclidean structure of different FBNs affect the performance of GNN-based disease classification. In this paper, we proposed a new method named Pearson's correlation-based Spatial Constraints Representation (PSCR) to estimate the FBN structures that were transformed to brain graphs and then fed into a graph attention network (GAT) to diagnose ASD. Extensive experiments on comparing different FBN construction methods and classification frameworks were conducted on the ABIDE I dataset (n = 871). The results demonstrated the superiority of our PSCR method and the influence of different FBNs on the GNN-based classification results. The proposed PSCR and GAT framework achieved promising classification results for ASD (accuracy: 72.40%), which significantly outperformed competing methods. This will help facilitate patient-control separation, and provide a promising solution for future disease diagnosis based on the FBN and GNN framework.

580 Vascular Distal Bypass Early Surveillance Audit

Introduction

Due to inconsistency in Duplex surveillance following distal bypass for peripheral arterial disease at our district general hospital. We planned an audit aiming to assess our current early surveillance of distal vascular bypass.

Method

The latest twenty patients who underwent distal bypass were collected retrospectively from the theatre’s records. Their clinical and imaging records were analysed to ascertain the timing of 1st duplex after the procedure. We also examined the discharge medications. We chose the standard advised by Society for Vascular Surgery that every patient following the procedure ideally should have (Clinical examination + ABPI + Duplex) at 1, 3, 6 and 12 months then annually.

Results

8 patients (40%) had a Duplex within 1 month, while 10% did not have a scan at all. Time range between the procedure and first Duplex was 1-11 months with a mean of 4 months. All patients were discharged on at least a single antiplatelet agent while only 70% were prescribed statins. Six patients needed an intervention for blocked graft but eventually failed, only one patient had a Duplex in a timely fashion, the stenosed graft was salvaged by angioplasty.

Conclusions

There was no clear standardized surveillance protocol for vascular team juniors to follow. In addition, discharge of distal bypass patients sometimes is carried by general surgery team during weekends and unlikely that a Duplex is booked. We suggested booking the Duplex in theaters soon after performing the procedure to ensure inclusion in the surveillance protocol, education of junior doctors and re-auditing in 1 year.

[Effectiveness of influenza vaccination for school-age children in preventing school absenteeism in Shenzhen: an empirical study]

Objective: To assess the impact of vaccination at school and influenza vaccination rates among school-age children on school absenteeism in Shenzhen. Methods: The study subjects were primary school students in Shenzhen. School absenteeism panel database from December 2017 to June 2020 of 286 primary schools in Shenzhen was merged with vaccination rates and organizational patterns (i.e., vaccination at school vs. non-school) data of 9 districts in Shenzhen after influenza vaccination for children. The outcome was the number of school absenteeism. The treatment and control groups were distinguished by organizational patterns and district vaccination rates. Difference-in-Difference (DiD) Poisson regressions were used to analyze the effectiveness of vaccination at school and higher vaccination rates. Besides, a robustness test was performed on the regression results. Results: Poisson regression analysis and robustness test of regression results showed that vaccination at school and higher vaccination rates effectively reduced the risk of school absenteeism, with effectiveness against absenteeism of 32.6% (95%CI: 17.0%-45.3%, P<0.01) and 53.0% (95%CI: 42.1%-61.8%, P<0.01), respectively. Conclusion: A free influenza vaccination program for school-age children in Shenzhen and prioritizing school-based vaccination may be an effective measure to reduce the risk of school absenteeism.

Additively manufactured biodegradable porous magnesium implants for elimination of implant-related infections: An in vitro and in vivo study

Magnesium (Mg) alloys that have both antibacterial and osteogenic properties are suitable candidates for orthopedic implants. However, the fabrication of ideal Mg implants suitable for bone repair remains challenging because it requires implants with interconnected pore structures and personalized geometric shapes. In this study, we fabricated a porous 3D-printed Mg-Nd-Zn-Zr (denoted as JDBM) implant with suitable mechanical properties using selective laser melting technology. The 3D-printed JDBM implant exhibited cytocompatibility in MC3T3-E1 and RAW267.4 cells and excellent osteoinductivity in vitro. Furthermore, the implant demonstrated excellent antibacterial ratios of 90.0% and 92.1% for methicillin-resistant S. aureus (MRSA) and Escherichia coli, respectively. The 3D-printed JDBM implant prevented MRSA-induced implant-related infection in a rabbit model and showed good in vivo biocompatibility based on the results of histological evaluation, blood tests, and Mg²⁺ deposition detection. In addition, enhanced inflammatory response and TNF-α secretion were observed at the bone-implant interface of the 3D-printed JDBM implants during the early implantation stage. The high Mg²⁺ environment produced by the degradation of 3D-printed JDBM implants could promote M1 phenotype of macrophages (Tnf, iNOS, Ccl3, Ccl4, Ccl5, Cxcl10, and Cxcl2), and enhance the phagocytic ability of macrophages. The enhanced immunoregulatory effect generated by relatively fast Mg²⁺ release and implant degradation during the early implantation stage is a potential antibacterial mechanism of Mg-based implant. Our findings indicate that 3D-printed porous JDBM implants, having both antibacterial property and osteoinductivity, hold potential for future orthopedic applications.

•

Porous JDBM implants promising mechanical properties was fabricated by selective laser melting.

•

3D-printed JDBM implant exhibited excellent antibacterial property, osteoinductivity, and biocompatibility.

•

Temporally enhanced immunoregulatory effect in early stage was a potential antibacterial mechanism of Mg-based implant.

Eye-Preserving Therapies for Advanced Retinoblastoma: A Multicenter Cohort of 1678 Patients in China

PURPOSE

This study attempted to estimate the impact of eye-preserving therapies for the long-term prognosis of patients with advanced retinoblastoma with regard to overall survival and ocular salvage.

DESIGN

Retrospective cohort study covering all 31 provinces (38 retinoblastoma treating centers) of mainland China.

PARTICIPANTS

One thousand six hundred seventy-eight patients diagnosed with group D or E retinoblastoma from January 2006 through May 2016.

METHODS

Chart review was performed. The patients were divided into primary enucleation and eye-preserving groups, and they were followed up for survival status. The impact of initial treatment on survival was evaluated by Cox analyses.

MAIN OUTCOME MEASURES

Overall survival and final eye preservation.

RESULTS

After a median follow-up of 43.9 months, 196 patients (12%) died, and the 5-year overall survival was 86%. In total, the eyeball preservation rate was 48%. In this cohort, 1172 patients (70%) had unilateral retinoblastoma, whereas 506 patients (30%) had bilateral disease. For patients with unilateral disease, 570 eyes (49%) underwent primary enucleation, and 602 patients (51%) received eye-preserving therapies initially. During the follow-up (median, 45.6 months), 59 patients (10%) from the primary enucleation group and 56 patients (9.3%) from the eye-preserving group died. Multivariate Cox analyses indicated no significant difference in overall survival between the 2 groups (hazard ratio [HR], 1.25; 95% confidence interval [CI], 0.85-1.84; P = 0.250). For patients with bilateral disease, 95 eyes (19%) underwent primary enucleation, and 411 patients (81%) received eye-preserving therapies initially. During the follow-up (median, 40.1 months), 12 patients (13%) from the primary enucleation group and 69 patients (17%) from the eye-preserving group died. For bilateral retinoblastoma with the worse eye classified as group E, patients undergoing primary enucleation exhibited better overall survival (HR, 2.35; 95% CI, 1.10-5.01; P = 0.027); however, this survival advantage was not evident until passing 22.6 months after initial diagnosis.

CONCLUSIONS

Eye-preserving therapies have been used widely for advanced retinoblastoma in China. Patients with bilateral disease whose worse eye was classified as group E and who initially underwent eye-preserving therapies exhibited a worse overall survival. The choice of primary treatment for advanced retinoblastoma should be weighed carefully.

Linking a European cohort of children born with congenital anomalies to vital statistics and mortality records: A EUROlinkCAT study

EUROCAT is a European network of population-based congenital anomaly (CA) registries. Twenty-one registries agreed to participate in the EUROlinkCAT study to determine if reliable information on the survival of children born with a major CA between 1995 and 2014 can be obtained through linkage to national vital statistics or mortality records. Live birth children with a CA could be linked using personal identifiers to either their national vital statistics (including birth records, death records, hospital records) or to mortality records only, depending on the data available within each region. In total, 18 of 21 registries with data on 192,862 children born with congenital anomalies participated in the study. One registry was unable to get ethical approval to participate and linkage was not possible for two registries due to local reasons. Eleven registries linked to vital statistics and seven registries linked to mortality records only; one of the latter only had identification numbers for 78% of cases, hence it was excluded from further analysis. For registries linking to vital statistics: six linked over 95% of their cases for all years and five were unable to link at least 85% of all live born CA children in the earlier years of the study. No estimate of linkage success could be calculated for registries linking to mortality records. Irrespective of linkage method, deaths that occurred during the first week of life were over three times less likely to be linked compared to deaths occurring after the first week of life. Linkage to vital statistics can provide accurate estimates of survival of children with CAs in some European countries. Bias arises when linkage is not successful, as early neonatal deaths were less likely to be linked. Linkage to mortality records only cannot be recommended, as linkage quality, and hence bias, cannot be assessed.

Function of Rhs proteins in porcine extraintestinal pathogenic Escherichia coli PCN033

Extraintestinal pathogenic Escherichia coli (ExPEC) is an important zoonotic pathogen that places severe burdens on public health and animal husbandry. There are many pathogenic factors in E. coli. The type VI secretion system (T6SS) is a nano-microbial weapon that can assemble quickly and inject toxic effectors into recipient cells when danger is encountered. T6SSs are encoded in the genomes of approximately 25% of sequenced Gram-negative bacteria. When these bacteria come into contact with eukaryotic cells or prokaryotic microbes, the T6SS assembles and secretes associated effectors. In the porcine ExPEC strain PCN033, we identified four classic rearrangement hotspot (Rhs) genes. We determined the functions of the four Rhs proteins through mutant construction and protein expression. Animal infection experiments showed that the Δrhs-1CT, Δrhs-2CT, Δrhs-3CT, and Δrhs-4CT caused a significant decrease in the multiplication ability of PCN033 in vivo. Cell infection experiments showed that the Rhs protein is involved in anti-phagocytosis activities and bacterial adhesion and invasion abilities. The results of this study demonstrated that rhs1, rhs3, and rh4 plays an important role in the interaction between PCN033 and host cell. Rhs2 has contribution to cell and mice infection. This study helps to elucidate the pathogenic mechanism governing PCN033 and may help to establish a foundation for further research seeking to identify potential T6SS effectors.

[Effect of metformin and rosiglitazone in non-obese polycystic ovary syndrome women with insulin resistance]

Objective: To investigate effects of metformin and rosiglitazone in non-obese polycystic ovary syndrome (PCOS) women with insulin resistance. Methods: Totally 200 non-obese PCOS women with insulin resistance in West China Second Hospital of Sichuan University were enrolled into this study from Sep. 2013 to Jun. 2016, and were randomly divided into two treatment groups: metformin group (1 500 mg/d) and rosiglitazone group (4 mg/d). The treatment lasted for 6 months. Their clinical and biochemical parameters were collected and compared. Results: In both groups, menstrual cycles [metformin group (37±4) days, rosiglitazone group (35±4) days] were shorter after treatment for 6 months (both P<0.01). After treatment for 6 months, body mass index [metformin group (21.6±1.6) kg/m², rosiglitazone group (21.7±1.7) kg/m²] decreased in both groups (both P<0.01); decreased LH/FSH ratio (metformin group 1.67±0.80, rosiglitazone group 1.70±0.83) was also observed (both P<0.05). After treatment for 6 months, fasting insulin level [metformin group (13.5±5.1) mU/L, rosiglitazone group (12.7±5.6) mU/L] and homeostasis model assessment-insulin resistance index (metformin group 3.0±1.2, rosiglitazone group 2.8±1.2) were decreased in both groups (all P<0.01). Conclusions: For non-obese PCOS insulin resistance patients, screening of anthropometric and metabolic parameters is necessary. For PCOS with insulin resistance, lifestyle plus insulin sensitizers such as metformin could improve their clinical symptoms, correct the biochemical and metabolic dysfunction.

QTL mapping of seedling tolerance to exposure to low temperature in the maize IBM RIL population

Maize is a cold sensitive crop that exhibits severe retardation of growth and development when exposed to cold spells during and right after germination, including the slowdown in development of new leaves and in formation of the photosynthetic apparatus. Improving cold tolerance in maize would allow early sowing to improve crop yield by prolonging a growing season and by decreasing the negative effects of summer drought, diseases, and pests. Two maize inbreds widely incorporated into American maize germplasm, B73 and Mo17, exhibit different levels of tolerance to low temperature exposure at seedling stage. In addition, thirty seven diverse inbred maize lines showed large variation for seedling response to low temperature exposure with lines with extremely low tolerance to seedling exposure to low temperatures falling into stiff stalk, non-stiff stalk, and tropical clades. We employed the maize intermated B73×Mo17 (IBM) recombinant inbred line population (IBM Syn4 RIL) to investigate the genetic architecture of cold stress tolerance at a young seedling stage and to identify quantitative trait loci (QTLs) controlling this variation. A panel of 97 recombinant inbred lines of IBM Syn4 were used to measure, and score based on several traits related to chlorophyll concentration, leaf color, and tissue damage. Our analysis resulted in detection of two QTLs with high additive impact, one on chromosome 1 (bin 1.02) and second on chromosome 5 (bin 5.05). Further investigation of the QTL regions using gene expression data provided a list of the candidate genes likely contributing to the variation in cold stress response. Among the genes located within QTL regions identified in this study and differentially expressed in response to low temperature exposure are the genes with putative functions related to auxin and gibberellin response, as well as general abiotic stress response, and genes coding for proteins with broad regulatory functions.

Clinical study of 3D printed personalized prosthesis in the treatment of bone defect after pelvic tumor resection

Background

/Objective: In recent years, prostheses have been widely used for limb reconstruction after pelvic tumour resection. However, prostheses are associated with problems leading to tumour recurrence, poor implant matching, defects after tumour resection, and easy implant looseness or failure. To achieve a precise preoperative design, complete tumour resection, and better anatomical structure matching and prosthesis stability, this study used three-dimensionally (3D)-printed osteotomy guides and personalised prostheses for reconstruction after pelvic tumour resection. This study aimed to explore the early clinical efficacy of 3D printed personalised prostheses for the reconstruction of bone defects after pelvic tumour resection.

Methods

A total of 20 patients (12 males, 8 females) with pelvic tumours surgically treated at our hospital between October 2014 and October 2019 were selected. There were 10 cases each of giant cell bone tumours and osteochondrosarcomas. According to Enneking zoning, there were 11 and 9 cases with tumours located in zones I and II, respectively. All cases were equally divided into conventional and 3D printing groups. For repair and reconstruction, a nail rod system or a steel plate was used in the conventional group while individualised 3D-printed prostheses were used in the 3D printing group. The surgical incision, duration of surgery, intraoperative blood loss, and the negative rate of resection margins in postoperative tumour specimens were examined. The follow-up focused on tumour recurrence, complications, and the Musculoskeletal Tumor Society (MSTS) score.

Results

All cases were followed-up for 6-24 months. The average incision length, duration of surgery, amount of intraoperative blood loss, and MSTS score of the 3D printing group were 10.0 ± 3.1 cm, 115.2 ± 25.3 min, 213.2 ± 104.6 mL, 23.8 ± 1.3, respectively, and those of the conventional group were 19.8 ± 8.4 cm, 156.8 ± 61.4 min, 361.4 ± 164.2 mL, and 18.3 ± 1.4, respectively. Histological tumour specimen examination showed nine and three cases with negative resection margins in the 3D printing group and the conventional group, respectively. The abovementioned indicators were significantly different between both groups (P < 0.05).

Conclusion

Applying 3D printed surgical guides and personalised prostheses for pelvic tumour resection, repair, and reconstruction, as well as preoperative planning and design, enables more accurate tumour resections and better prosthesis-patient matchings, possibly reducing surgical trauma, shortening the duration of surgery, and promoting the functional recovery of patients postoperatively.

The Translation Potential of this Article

Contrary to existing studies on 3D printed personalised prostheses, this study reports the clinical efficacy of the aforementioned technology in treating bone defects in a series of patients who underwent pelvic tumour resection. Moreover, it presents a comprehensive comparison of this technology with conventional procedures, thus strengthening its importance in treatment regimens for reconstructing bone defects.

Effects of different ozone treatments on the storage quality and stability of fresh peeled garlic

In order to understand their impacts on the preservation of fresh garlic, varying concentrations of ozone gas and different storage temperatures were tested for this experiment. The results demonstrated that freshly peeled garlic was best preserved by an ozone concentration of 5 ppm and storage at 4 °C compared to other treatment groups. With these optimized conditions, after 25 days of storage, the weight of garlic decreased by only 1.89% and, under the same storage conditions, the water loss rate was only 65.17% that of the control group, with a decay rate of only 12.50%. The rate of decay in the blank control group was three times that of this group. The germination rate was also low: only 30.26%, which was 57.69% that of the blank control group. The hardness was measured at 7.48 kg cm-2, 19.79% higher than that of the blank group. The content of soluble solids was 9.15 g 100 mL-1, which was 10.27% higher than that of the blank group, again proving that the above storage parameters were effective. At the same time, the titratable acid (TA) in the garlic was 15.48%, which was 1.17 times that of the blank group and corresponds to the vitamin C content. Also, the content of diallyl trisulfide only decreased by 3.98% and was 11.2% higher (P < 0.01) than that of the blank group. Finally, the validity of this optimal result was also confirmed by sensory evaluation. These results, for garlic, support the application of ozone as a safe, non-thermal preservation technique benefiting both producers and consumers.

Mechanisms of regulating NIS transport to the cell membrane and redifferentiation therapy in thyroid cancer

Iodine is an essential constituent of thyroid hormone. Active iodide accumulation in the thyroid is mediated by the sodium iodide symporter (NIS), comprising the first step in thyroid hormone biosynthesis, which relies on the functional expression of NIS on the cell membrane. The retention of NIS expressed in differentiated thyroid cancer (DTC) cells allows further treatment with post-operative radioactive iodine (RAI) therapy. However, compared with normal thyroid tissue, differentiated thyroid tumors usually show a decrease in the active iodide conveyance and NIS is generally retained within the cells, indicating that posttranslational protein transfer to the plasma membrane is abnormal. In recent years, through in vitro studies and studies of patients with DTC, various methods have been tested to increase the transport rate of NIS to the cell membrane and increase the absorption of iodine. An in-depth understanding of the mechanism of NIS transport to the plasma membrane could lead to improvements in RAI therapy. Therefore, in this review, we discuss the current knowledge concerning the post-translational mechanisms that regulate NIS transport to the cell membrane and the current status of redifferentiation therapy for patients with RAI-refractory (RAIR)-DTC.

Innovating Technology-Enhanced Interventions for Youth Suicide: Insights for Measuring Implementation Outcomes

Technology is one medium to increase youth engagement, especially among underserved and minority groups, in suicide preventive interventions. Technology can be used to supplement or adjunct an in-person intervention, guide an in-person intervention, or be the stand-alone (automated) component of the intervention. This range in technological use is now called the continuum of behavioral intervention technologies (BITs). Overall, suicide intervention researchers do not use this terminology to categorize how the role of technology differs across technology-enhanced youth interventions. There is growing recognition that technology-enhanced interventions will not create substantial public health impact without an understanding of the individual (youth, families, and providers), mezzo (clinics and health systems of care), and contextual factors (society, culture, community) that are associated with their implementation. Implementation science is the study of methods to promote uptake of evidence-based practices and policies into the broader health care system. In this review, we incorporate work from implementation science and BIT implementation to illustrate how the study of technology-enhanced interventions for youth suicide can be advanced by specifying the role of technology and measuring implementation outcomes.

Adult skin acute stress responses to short-term environmental and internal aggression from exposome factors

Exposome factors that lead to stressed skin can be defined as any disturbance to homeostasis from environmental (meteorological factors, solar radiation, pollution or tobacco smoke) and/or internal exposure (unhealthy diet, hormonal variations, lack of sleep, psychosocial stress). The clinical and biological impact of chronic exposome effects on skin functions has been extensively reviewed, whereas there is a paucity of information on the impact of short‐term acute exposure. Acute stress, which would typically last minutes to hours (and generally no more than a week), provokes a transient but robust neuroendocrine‐immune and tissue remodelling response in the skin and can alter the skin barrier. Firstly, we provide an overview of the biological effects of various acute stressors on six key skin functions, namely the skin physical barrier, pigmentation, defences (antioxidant, immune cell‐mediated, microbial and microbiome maintenance), structure (extracellular matrix and appendages), neuroendocrine and thermoregulation functions. Secondly, we describe the biological and clinical effects on adult skin from individual exposome factors that elicit an acute stress response and their consequences in skin health maintenance. Clinical manifestations of acutely stressed skin may include dry skin that might accentuate fine lines, oily skin, sensitive skin, pruritus, erythema, pale skin, sweating, oedema and flares of inflammatory skin conditions such as acne, rosacea, atopic dermatitis, pigmentation disorders and skin superinfection such as viral reactivation. Acute stresses can also induce scalp sensitivity, telogen effluvium and worsen alopecia.

A review of the Turned-down Onto Pericapsular-tissue Hemisectioned Amputated Toe (TOPHAT) flap for wound coverage during ray amputations of the toes

INTRODUCTION

Exposure of the adjacent Metatarsal-Phalangeal Joint (MTPJ) commonly occurs after application of Topical Negative Pressure Wound Therapy (TNPWT) for a ray amputation wound. This is due to mechanical soft tissue erosion or trauma to the adjacent digital artery from direct pressure effect. This results in toe gangrene requiring a ray amputation and ultimately a larger wound bed. We describe the use of the Turned-down Onto Pericapsular-tissue Hemisectioned Amputated Toe (TOPHAT) flap - a filleted toe flap to protect the adjacent MTPJ capsule combined with a novel Negative Pressure Wound Therapy with instillation and dwell-time (NPWTi-d) dressing technique. The flap protects the adjacent joint capsule and reduces the wound burden whilst allowing the wound to benefit from TNPWT, thereby accelerating wound healing.

MATERIAL AND METHODS

A retrospective review was conducted of patients with toe gangrene requiring ray amputation that underwent the TOPHAT flap on in our institution from 2019 and 2020. Complications such as wound dehiscence, hematoma, flap necrosis and secondary infection were recorded. Other outcomes recorded were time taken to final skin grafting and time taken for complete wound epithelialization.

RESULTS

9 patients underwent treatment with the TOPHAT flap. 2 patients had flap necrosis. 7 patients progressed to definitive skin coverage with skin grafting. One patient subsequently had progressive arterial disease despite successful skin grafting and required above knee amputation. The mean time to final skin grafting and complete wound epithelialization was 49.5 days and 107.5 days respectively. All patients were satisfied with the outcomes and were able to return to their pre-morbid function.

CONCLUSIONS

The TOPHAT flap has a consistent vascular supply that provides durable soft tissue coverage. It is a robust and easily reproducible technique to accelerate wound healing after ray amputations even in patients with peripheral vascular disease.

Circ-ABCB10 promotes proliferation and invasion of esophageal squamous cell carcinoma cells by modulating microRNA-670-3p

OBJECTIVE

Circ-ABCB10 is a non-coding RNA newly discovered in recent years. It has been observed to serve as an oncogene in a variety of tumors, but its biological function in esophageal squamous cell carcinoma (ESCC) is still unknown. The purpose of this study was to investigate the circ-ABCB10 expression in ESCC and its possible molecular mechanism.

PATIENTS AND METHODS

Circ-ABCB10 expression in ESCC tissue samples and cell lines was detected by quantitative real-time polymerase chain reaction (qRT-PCR). The impacts of circ-ABCB10 on the biological functions of ESCC cells were examined by cell counting kit-8 (CCK-8) and transwell assays. Moreover, bioinformatics analysis was used to determine the binding sites between miRNAs and circ-ABCB10, and the binding relationship was verified by qRT-PCR and Luciferase assay.

RESULTS

QRT-PCR analysis revealed that circ-ABCB10 expression in both ESCC tissues and cell lines was higher than that in the normal control group. Patients in high TNM stage exhibited a higher expression of circ-ABCB10 than those in low stage, and this high expression predicted a poor prognosis of ESCC patients. Inhibiting circ-ABCB10 expression remarkably inhibited the growth and metastasis of ESCC cells. In addition, it was demonstrated that circ-ABCB10 could bind to microRNA-670-3p and inhibit its expression. Downregulation of microRNA-670-3p partially reversed the inhibitory impact of low-expressing circ-ABCB10 on cell growth and migration rate.

CONCLUSIONS

Circ-ABCB10 accelerates the metastasis and proliferation of ESCC cells by binding to microRNA-670-3p. This circ-ABCB10 / microRNA-670-3p axis may become a potential therapeutic target for ESCC therapy.

Gut-derived acetate promotes B10 cells with antiinflammatory effects

Autoimmune diseases are characterized by a breakdown of immune tolerance partly due to environmental factors. The short-chain fatty acid acetate, derived mostly from gut microbial fermentation of dietary fiber, promotes antiinflammatory Tregs and protects mice from type 1 diabetes, colitis, and allergies. Here, we show that the effects of acetate extend to another important immune subset involved in tolerance, the IL-10-producing regulatory B cells (B10 cells). Acetate directly promoted B10 cell differentiation from mouse B1a cells both in vivo and in vitro. These effects were linked to metabolic changes through the increased production of acetyl-coenzyme A, which fueled the TCA cycle and promoted posttranslational lysine acetylation. Acetate also promoted B10 cells from human blood cells through similar mechanisms. Finally, we identified that dietary fiber supplementation in healthy individuals was associated with increased blood-derived B10 cells. Direct delivery of acetate or indirect delivery via diets or bacteria that produce acetate might be a promising approach to restore B10 cells in noncommunicable diseases.

The methylation level of TFAP2A is a potential diagnostic biomarker for retinoblastoma: an analytical validation study

Tumor-derived circulating tumor DNA (ctDNA) has demonstrated its excellent potential for cancer diagnosis by DNA methylome; therefore, this study aimed to identify the retinoblastoma (RB) specific methylated CpG loci as the RB diagnostic biomarkers and design a methylation specific assay to detect these biomarker from aqueous humor of RB patients. Through a genome-wide methylation profiling of tissue samples from patients with RB, normal retina and other retinal diseases, we shortlisted two CpG loci were only methylated in RB but not in normal retina or other retinal diseases. Both of these two CpG loci were located in the genome of TFAP2A. Through the screening, a primer and probe set for the two CpG loci were tested in fully methylated standards and RB tissues with a significant differentiation of RB. Our results of this assay tested in aqueous humor from RB revealed an accuracy of 92.7% for RB diagnosis. These results suggested our assay targeting the TFAP2A ctDNA methylation can be utilized for RB diagnosis and cancer monitoring.