101
|
DeLeo PC, Huynh C, Pattanayek M, Schmid KC, Pechacek N. Assessment of ecological hazards and environmental fate of disinfectant quaternary ammonium compounds. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2020; 206:111116. [PMID: 32890921 PMCID: PMC7467655 DOI: 10.1016/j.ecoenv.2020.111116] [Citation(s) in RCA: 42] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/06/2020] [Revised: 07/13/2020] [Accepted: 07/31/2020] [Indexed: 05/09/2023]
Abstract
Disinfectant quaternary ammonium compounds (Quats) have diverse uses in a variety of consumer and commercial products, particularly cleaning products. With the emergence of the COVID-19 pandemic, they have become a primary tool to inactivate the SARS-CoV-2 virus on surfaces. Disinfectant Quats have very low vapor pressure, and following the use phase of the products in which they are found, disposal is typically "down-the-drain" to wastewater treatment systems. Consequently, the potential for the greatest environmental effect is to the aquatic environment, from treated effluent, and potentially to soils, which might be amended with wastewater biosolids. Among the earliest used and still common disinfectant Quats are the alkyl dimethyl benzyl ammonium chloride (ADBAC) compounds and the dialkyl dimethyl ammonium chloride (DDAC) compounds. They are cationic surfactants often found in consumer and commercial surface cleaners. Because of their biocidal properties, disinfectant Quats are heavily regulated for human and environmental safety around the world. Consequently, there is a robust database of information regarding the ecological hazards and environmental fate of ADBAC and DDAC; however, some of the data presented are from unpublished studies that have been submitted to and reviewed by regulatory agencies (i.e., EPA and European Chemicals Agency) to support antimicrobial product registration. We summarize the available environmental fate data and the acute and chronic aquatic ecotoxicity data for freshwater species, including algae, invertebrates, fish, and plants using peer-reviewed literature and unpublished data submitted to and summarized by regulatory agencies. The lower limit of the range of the ecotoxicity data for disinfectant Quats tends to be lower than that for other surface active agents, such as nonionic or anionic surfactants. However, ecotoxicity is mitigated by environmental fate characteristics, the data for which we also summarize, including high biodegradability and a strong tendency to sorb to wastewater biosolids, sediment, and soil. As a result, disinfectant Quats are largely removed during wastewater treatment, and those residues discharged in treated effluent are likely to rapidly bind to suspended solids or sediments, thus mitigating their toxicity.
Collapse
|
102
|
Blázquez M, Andreu-Sánchez O, Ranero I, Fernández-Cruz ML, Benfenati E. Comparing in vivo data and in silico predictions for acute effects assessment of biocidal active substances and metabolites for aquatic organisms. ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY 2020; 205:111291. [PMID: 32956865 DOI: 10.1016/j.ecoenv.2020.111291] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/23/2020] [Revised: 09/01/2020] [Accepted: 09/02/2020] [Indexed: 06/11/2023]
Abstract
The purpose of this study was to determine the acute toxicity in aquatic organisms of one biocidal active substance and six metabolites derived from biocidal active substances and to assess the suitability of available QSAR models to predict the obtained values. We have reported the acute toxicity in sewage treatment plant (STP) microorganisms, in the freshwater microalgae Pseudokirchneriella subcapitata and in Daphnia magna following OECD test methods. We have also identified in silico models for acute toxicity of these trophic levels currently available in widely recognized platforms such as VEGA and the OECD QSAR ToolBox. A total of six, four and two models have been selected for Daphnia, algae and microorganisms, respectively. Finally, we have compared the in silico and in vivo data for the seven compounds plus two previously assayed biocidal substances. None of the compounds tested were toxic for Daphnia and STP microorganisms. For microalgae, CGA71019 (1,2,4 triazole) presented an ErC50 value of 38.3 mg/L. The selected in silico models have provided lower EC50 values and are therefore more conservative. Models from the OECD QSAR ToolBox predicted values for 7 out of 9 and for 4 out of 9 chemicals for Daphnia and P. subcapitata, respectively. No predictive models were identified in such platform for STP microorganism's acute effects. In terms of models's specificity, biocide-specific models, developed from curated datasets integrated by biocidal active substances and implemented in VEGA, perform better in the case of microalgae but for Daphnia an alternative, non biocide-specific has revealed a better performance. For STP microorganisms only biocide-specific models have been identified.
Collapse
|
103
|
Qiu J, Huang Y, Wu Y, Shi P, Xu B, Chu W, Pan Y. Detection, transformation, and toxicity of indole-derivative nonsteroidal anti-inflammatory drugs during chlorine disinfection. CHEMOSPHERE 2020; 260:127579. [PMID: 32679375 DOI: 10.1016/j.chemosphere.2020.127579] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/13/2020] [Revised: 06/30/2020] [Accepted: 07/01/2020] [Indexed: 06/11/2023]
Abstract
As important emerging contaminants, nonsteroidal anti-inflammatory drugs (NSAIDs) are the most intensively prescribed pharmaceuticals introduced to drinking water due to their incomplete removal in wastewater treatment. While concentrations of NSAIDs in drinking water are generally low, they have been attracting increasing concern as a result of their disinfection byproducts (DBPs) generated in drinking water disinfection. In this work, detection methods were set up for four representative indole-derivative NSAIDs (indomethacin, acemetacin, sulindac, and etodolac) using ultra performance liquid chromatography/electrospray ionization-triple quadruple mass spectrometry (UPLC/ESI-tqMS). ESI+ was better for detection of indomethacin and sulindac, whereas ESI- was suitable to detection of acemetacin and etodolac. With optimized MS parameters, the instrument detection and quantitation limits of the four indole derivatives were achieved to be 1.1-24.6 ng/L and 3.7-41.0 ng/L, respectively. During chlorination, indomethacin and acemetacin could undergo five major reaction types (chlorine substitution, hydrolysis, decarboxylation, C-C coupling, and C-N cleavage) to form a series of DBPs, among which 19 were proposed/identified with structures. Based on the revealed structures of DBPs, transformation pathways of indomethacin and acemetacin in chlorination were partially elucidated. Notably, individual and mixture toxicity of indomethacin and acemetacin before/after chlorination were evaluated using a well-established acute toxicity assessment and a Hep G2 cell cytotoxicity assay, respectively. Results showed that the predicted acute toxicity of a few chlorination DBPs were higher than their precursors; chlorination substantially enhanced the mixture cytotoxicity of indomethacin by over 10 times and slightly increased the mixture cytotoxicity of acemetacin.
Collapse
|
104
|
Ogilvie BH, Solis-Leal A, Lopez JB, Poole BD, Robison RA, Berges BK. Alcohol-free hand sanitizer and other quaternary ammonium disinfectants quickly and effectively inactivate SARS-CoV-2. J Hosp Infect 2020; 108:142-145. [PMID: 33259880 PMCID: PMC7700010 DOI: 10.1016/j.jhin.2020.11.023] [Citation(s) in RCA: 51] [Impact Index Per Article: 12.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/08/2020] [Revised: 11/23/2020] [Accepted: 11/25/2020] [Indexed: 11/18/2022]
Abstract
BACKGROUND SARS-CoV-2 is the virus responsible for the current global pandemic, COVID-19. Because this virus is novel, little is known about its sensitivity to disinfection. METHODS We performed suspension tests against SARS-CoV-2 using three commercially available quaternary ammonium compound (Quat) disinfectants and one laboratory-made 0.2% benzalkonium chloride solution. FINDINGS Three of the four formulations completely inactivated the virus within 15 s of contact, even in the presence of a soil load or when diluted in hard water. CONCLUSION Quats rapidly inactivate SARS-CoV-2, making them potentially useful for controlling SARS-CoV-2 spread in hospitals and the community.
Collapse
|
105
|
Eslami H, Das S, Zhou T, Müller-Plathe F. How Alcoholic Disinfectants Affect Coronavirus Model Membranes: Membrane Fluidity, Permeability, and Disintegration. J Phys Chem B 2020; 124:10374-10385. [PMID: 33172260 PMCID: PMC7670823 DOI: 10.1021/acs.jpcb.0c08296] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/11/2020] [Revised: 10/28/2020] [Indexed: 01/17/2023]
Abstract
Atomistic molecular dynamics simulations have been carried out with a view to investigating the stability of the SARS-CoV-2 exterior membrane with respect to two common disinfectants, namely, aqueous solutions of ethanol and n-propanol. We used dipalmitoylphosphatidylcholine (DPPC) as a model membrane material and did simulations on both gel and liquid crystalline phases of membrane surrounded by aqueous solutions of varying alcohol concentrations (up to 17.5 mol %). While a moderate effect of alcohol on the gel phase of membrane is observed, its liquid crystalline phase is shown to be influenced dramatically by either alcohol. Our results show that aqueous solutions of only 5 and 10 mol % alcohol already have significant weakening effects on the membrane. The effects of n-propanol are always stronger than those of ethanol. The membrane changes its structure, when exposed to disinfectant solutions; uptake of alcohol causes it to swell laterally but to shrink vertically. At the same time, the orientational order of lipid tails decreases significantly. Metadynamics and grand-canonical ensemble simulations were done to calculate the free-energy profiles for permeation of alcohol and alcohol/water solubility in the DPPC. We found that the free-energy barrier to permeation of the DPPC liquid crystalline phase by all permeants is significantly lowered by alcohol uptake. At a disinfectant concentration of 10 mol %, it becomes insignificant enough to allow almost free passage of the disinfectant to the inside of the virus to cause damage there. It should be noted that the disinfectant also causes the barrier for water permeation to drop. Furthermore, the shrinking of the membrane thickness shortens the gap needed to be crossed by penetrants from outside the virus into its core. The lateral swelling also increases the average distance between head groups, which is a secondary barrier to membrane penetration, and hence further increases the penetration by disinfectants. At alcohol concentrations in the disinfectant solution above 15 mol %, we reliably observe disintegration of the DPPC membrane in its liquid crystalline phase.
Collapse
|
106
|
Ou T, Fang C, Ding S, Zhao T, Liu S, Yu Z, Chu W. Has the formation of disinfection by-products been overestimated? Membrane leakage from syringe filter heads serves as unexpected precursors. CHEMOSPHERE 2020; 258:127278. [PMID: 32554006 DOI: 10.1016/j.chemosphere.2020.127278] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/05/2020] [Revised: 05/26/2020] [Accepted: 05/30/2020] [Indexed: 06/11/2023]
Abstract
Syringe filters are widely used for sample pretreatments in laboratories. This study found that, surprisingly, these filters can leak dissolved organic carbon (DOC) that can potentially serve as precursors of disinfection by-products (DBPs). Nine common types of syringe filters were assessed. The results showed that the DOC of ultrapure water increased after syringe filtration. The DOC shed from filter membranes was characterized, whose spectra showed that the main compounds exhibited a low apparent molecular weight. Five classes of DBPs were investigated including trihalomethanes, haloacetaldehydes, haloacetonitriles, haloacetamides and halonitromethanes, among which trichloromethane (TCM), dichloroacetaldehyde (DCAL), trichloroacetaldehyde (TCAL), dichloroacetonitrile (DCAN), and trichloronitromethane (TCNM) were principally detected. The DBP formation was affected by chlorination time and membrane types. In general, the use of the poly vinylidene fluoride membrane resulted in the highest formation of TCM and TCAL, whereas nylon and mixed cellulose esters membranes contributed significantly to the formation of DCAN and TCNM, respectively. The shedding DOC and the formation of TCM, DCAL and TCAL from filter membranes were mitigated effectively by pre-washing; however, the contribution of membrane leakage to DCAN and TCNM formation was still notable, even with a pre-wash volume of 50 mL. When unwashed syringe filters were used for a real water sample, the DBP formation increased by up to 73.2% compared to the pre-washed ones; particularly for TCNM it was always over 15%. Therefore, for better quality control in laboratories, more attention should be paid to the syringe filters during sample pre-treatments, particularly when DBP formation is being investigated.
Collapse
|
107
|
Guo H, Li W, Huang Y, Li X, Li Z, Zhou H, Sun E, Li L, Li J. Increased microbial loading in aerosols produced by non-contact air-puff tonometer and relative suggestions for the prevention of coronavirus disease 2019 (COVID-19). PLoS One 2020; 15:e0240421. [PMID: 33031477 PMCID: PMC7544126 DOI: 10.1371/journal.pone.0240421] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/08/2020] [Accepted: 09/27/2020] [Indexed: 11/18/2022] Open
Abstract
OBJECTIVE To evaluate the microbial loading in aerosols produced after air-puff by non-contact tonometer (NCT) as well as the effect of alcohol disinfection on the inhibition of microbes and thus to provide suggestions for the prevention and control of COVID-19 in ophthalmic departments of hospitals or clinics during the great pandemics. METHODS A cross-sectional study was carried out in this study. A NIDEK NCT was used for intraocular pressure (IOP) measurement for patients who visited Department of Ophthalmology in Qilu Hospital of Shandong University during March 18-25 2020. After ultra-violate (UV) light disinfection, the room air was sampled for 5 minutes. Before and after alcohol disinfection, the air samples and nozzle surface samples were respectively collected by plate exposure method and sterile moist cotton swab technique after predetermined times of NCT air-puff. Microbial colony counts were calculated after incubation for 48 hours. Finally, mass spectrometry was performed for the accurate identification of microbial species. RESULTS Increased microbial colonies were detected from air samples close to NCT nozzle after air-puff compared with air samples at a distance of 1 meter from the nozzle (p = 0.001). Interestingly, none microbes were detected on the surface of NCT nozzle. Importantly, after 75% alcohol disinfection less microbes were detected in the air beside the nozzle (p = 0.003). Microbial species identification showed more than ten strains of microbes, all of which were non-pathogenic. CONCLUSION Aerosols containing microbes were produced by NCT air-puff in the ophthalmic consultation room, which may be a possible virus transmission route in the department of ophthalmology during the COVID-19 pandemic. Alcohol disinfection for the nozzle and the surrounding air was efficient at decreasing the microbes contained in the aerosols and theoretically this prevention measure could also inhibit the virus. This will give guidance for the prevention of virus transmission and protection of hospital staff and patients.
Collapse
|
108
|
Doverspike JC, Mack SJ, Lou A, Stringer B, Reno S, Cornell MS, Rojas-Pena A, Wu J, Xi C, Yevzlin A, Meyerhoff ME. Nitric Oxide-Releasing Insert for Disinfecting the Hub Region of Tunnel Dialysis Catheters. ACS APPLIED MATERIALS & INTERFACES 2020; 12:44475-44484. [PMID: 32931236 PMCID: PMC8394517 DOI: 10.1021/acsami.0c13230] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/13/2023]
Abstract
The use of tunneled dialysis catheters (TDCs) for patients in need of hemodialysis treatments (HDs) causes a significant number of bloodstream infections (BSIs), with very few viable preventative/treatment methods. Use of antibiotics is relatively ineffective due to the development of multidrug-resistant bacterial strains and the inability to penetrate bacterial biofilms. Nitric oxide (NO) is an endogenous gas molecule that has broad-spectrum antimicrobial/antibiofilm activity. In this study, the potential of creating a NO-releasing insert device that is attached onto the hub region cap of TDCs and locally releases NO within the TDC hub is evaluated for its antimicrobial/antibiofilm effectiveness. The NO-releasing insert contains the natural NO donor S-nitrosoglutathione (GSNO), along with zinc oxide (ZnO) nanoparticles to accelerate NO release from the GSNO, within a short silicone tube that is sealed at both ends and attached to the catheter cap. An in vitro 3-d-long antimicrobial study using catheter hubs yielded >6.6 log reductions of both Pseudomonas aeruginosa and Staphylococcus aureus for the NO-releasing insert device compared to controls. Two 14-d-long sheep studies demonstrated that the NO-releasing insert devices are exceptionally potent at preventing bacteria/biofilm growth on the inner lumen walls of TDCs compared to controls that have no preventative treatment devices as well as implanted TDCs that have commercially available chlorhexidine-treated insert devices placed within the hub regions.
Collapse
|
109
|
Meyers C, Kass R, Goldenberg D, Milici J, Alam S, Robison R. Ethanol and isopropanol inactivation of human coronavirus on hard surfaces. J Hosp Infect 2020; 107:45-49. [PMID: 32991941 PMCID: PMC7521917 DOI: 10.1016/j.jhin.2020.09.026] [Citation(s) in RCA: 29] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/02/2020] [Revised: 09/21/2020] [Accepted: 09/22/2020] [Indexed: 12/21/2022]
Abstract
BACKGROUND The coronavirus disease 2019 pandemic has greatly increased the frequency of disinfecting surfaces in public places, causing a strain on the ability to obtain disinfectant solutions. An alternative is to use plain alcohols (EtOH and IPA) or sodium hypochlorite (SH). AIM To determine the efficacy of various concentrations of EtOH, IPA and SH on a human coronavirus (HCoV) dried on to surfaces using short contact times. METHODS High concentrations of infectious HCoV were dried on to porcelain and ceramic tiles, then treated with various concentrations of the alcohols for contact times of 15 s, 30 s and 1 min. Three concentrations of SH were also tested. Reductions in titres were measured using the tissue culture infectious dose 50 assay. FINDINGS Concentrations of EtOH and IPA from 62% to 80% were very efficient at inactivating high concentrations of HCoV dried on to tile surfaces, even with a 15-s contact time. Concentrations of 95% dehydrated the virus, allowing infectious virus to survive. The dilutions of SH recommended by the Centers for Disease Control and Prevention (1/10 and 1/50) were efficient at inactivating high concentrations of HCoV dried on to tile surfaces, whereas a 1/100 dilution had substantially lower activity. CONCLUSIONS Multiple concentrations of EtOH, IPA and SH efficiently inactivated infectious HCoV on hard surfaces, typical of those found in public places. Often no remaining infectious HCoV could be detected.
Collapse
|
110
|
Dear K, Grayson L, Nixon R. Potential methanol toxicity and the importance of using a standardised alcohol-based hand rub formulation in the era of COVID-19. Antimicrob Resist Infect Control 2020; 9:129. [PMID: 32771064 PMCID: PMC7414286 DOI: 10.1186/s13756-020-00788-5] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/25/2020] [Accepted: 07/21/2020] [Indexed: 01/14/2023] Open
Abstract
OBJECTIVES Hand sanitisers are urgently needed in the time of COVID-19, and as a result of shortages, some people have resorted to making their own formulations, including the repurposing of distilleries. We wish to highlight the importance of those producing hand sanitisers to avoid methylated spirits containing methanol and to follow WHO recommended formulations. METHODS We explore and discuss reports of methanol toxicity through ingestion and transdermal absorption. We discuss the WHO formulations and explain the rationale behind the chosen ingredients. SHORT CONCLUSION We advise those producing hand sanitisers to follow WHO recommended formulations, and advise those producing hand sanitisers using methylated spirits, to avoid formulations which contain methanol.
Collapse
|
111
|
Talebian S, Wallace GG, Schroeder A, Stellacci F, Conde J. Nanotechnology-based disinfectants and sensors for SARS-CoV-2. NATURE NANOTECHNOLOGY 2020; 15:618-621. [PMID: 32728083 DOI: 10.1038/s41565-020-0751-0] [Citation(s) in RCA: 180] [Impact Index Per Article: 45.0] [Reference Citation Analysis] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/18/2023]
|
112
|
Harris CA, Evans HL, Telem DA. A Practical Decontamination Framework for COVID-19 Front-line Workers Returning Home. Ann Surg 2020; 272:e129-e131. [PMID: 32675515 PMCID: PMC7268836 DOI: 10.1097/sla.0000000000003990] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/02/2022]
|
113
|
Zhou R, Xu Z, Zhu J, Liu W, Meng Y, Zhu P, Zhou W, Huang C, Ding X. Determination of 10 Haloacetamides in drinking water by gas chromatography with automated solid phase extraction. J Chromatogr B Analyt Technol Biomed Life Sci 2020; 1150:122191. [PMID: 32485650 DOI: 10.1016/j.jchromb.2020.122191] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2019] [Revised: 04/29/2020] [Accepted: 05/23/2020] [Indexed: 11/17/2022]
Abstract
Drinking water disinfection may result in the formation of different classes of toxic disinfection by-products (DBPs). Haloacetamides (HAcAms) are an emerging class of nitrogenous DBPs (N-DBPs), which are generally more prevalent at lower concentrations in disinfected water than carbonaceous DBPs. Herein a fast, convenient, and effective method of analyzing 10 HAcAms in drinking water samples was demonstrated. This method was developed using gas chromatography /electron capture detection (GC/ECD) supplemented with automated solid phase extraction (auto-SPE). The variables for automated SPE procedures were further optimized, including the selection of SPE sorbents, types and volumes of extraction solvents, SPE washing solvents and wash times. Under optimized conditions, the instrumental linearity range was 0.5-150 μg L-1 with correlation coefficients>0.9975. The limits of detection and quantification of this method were 0.002-0.003 μg L-1 and 0.005-0.010 μg L-1, respectively. The recovery values ranged from 72.4% to 108.5%, and the relative standard deviations ranged from 3.3% to 9.1%. Therefore, the auto-SPE-GC-ECD method showed acceptable linearity and repeatability and was subsequently validated and applied to analyze 10 HAcAms in drinking water.
Collapse
|
114
|
Aasi A, Aghaei SM, Moore MD, Panchapakesan B. Pt-, Rh-, Ru-, and Cu-Single-Wall Carbon Nanotubes Are Exceptional Candidates for Design of Anti-Viral Surfaces: A Theoretical Study. Int J Mol Sci 2020; 21:E5211. [PMID: 32717853 PMCID: PMC7432269 DOI: 10.3390/ijms21155211] [Citation(s) in RCA: 27] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/11/2020] [Revised: 07/15/2020] [Accepted: 07/21/2020] [Indexed: 01/04/2023] Open
Abstract
As SARS-CoV-2 is spreading rapidly around the globe, adopting proper actions for confronting and protecting against this virus is an essential and unmet task. Reactive oxygen species (ROS) promoting molecules such as peroxides are detrimental to many viruses, including coronaviruses. In this paper, metal decorated single-wall carbon nanotubes (SWCNTs) were evaluated for hydrogen peroxide (H2O2) adsorption for potential use for designing viral inactivation surfaces. We employed first-principles methods based on the density functional theory (DFT) to investigate the capture of an individual H2O2 molecule on pristine and metal (Pt, Pd, Ni, Cu, Rh, or Ru) decorated SWCNTs. Although the single H2O2 molecule is weakly physisorbed on pristine SWCNT, a significant improvement on its adsorption energy was found by utilizing metal functionalized SWCNT as the adsorbent. It was revealed that Rh-SWCNT and Ru-SWCNT systems demonstrate outstanding performance for H2O2 adsorption. Furthermore, we discovered through calculations that Pt- and Cu-decorated SWNCT-H2O2 systems show high potential for filters for virus removal and inactivation with a very long shelf-life (2.2 × 1012 and 1.9 × 108 years, respectively). The strong adsorption of metal decorated SWCNTs and the long shelf-life of these nanomaterials suggest they are exceptional candidates for designing personal protection equipment against viruses.
Collapse
|
115
|
Ateia M, Kanan A, Karanfil T. Microplastics release precursors of chlorinated and brominated disinfection byproducts in water. CHEMOSPHERE 2020; 251:126452. [PMID: 32443227 DOI: 10.1016/j.chemosphere.2020.126452] [Citation(s) in RCA: 40] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/22/2020] [Revised: 03/05/2020] [Accepted: 03/07/2020] [Indexed: 06/11/2023]
Abstract
Microplastics (MPs) are prevalent global pollutants that are being detected in aquatic ecosystems and drinking water sources around the world. In addition to plastic polymers, MPs contain various chemical substances (known as "additives") that can leach and risk water quality. In this paper, we investigated for the first time the potential release of disinfection byproducts (DBPs) precursors when MPs are exposed to hydrolysis and/or degradation by simulated sunlight. Seventeen MPs with seven different polymer types were collected either as commercial products (e.g. drinking water bottles, shopping bags, recycled plastics, etc.) or pure/virgin polymers. Results showed high release of dissolved organic carbon (DOC) from five MP samples and a significant increase in bromide concentrations from four MPs. DBPs formation potential (DBPFP) experiments with MPs' leachates showed higher concentrations of chlorinated trihalomethanes (THMs), haloacetonitriles (HANs), and total organic halogens (TOX) in three samples, while a significant shift to brominated DBPs was observed in samples containing bromide. Extending the leaching experiments to four consecutive cycles showed that the leaching of DOC and DBPs' precursor significantly decreased after the second leaching cycle. Further analysis revealed that the reactivity of the leached DOC - indicated by THMFP yields - was comparable to those of several raw waters that supply drinking water treatment plants. The leached THMs and TOX from MPs that were exposed to UVA irradiation were in general higher than MPs that were run under dark conditions.
Collapse
|
116
|
Berardi A, Perinelli DR, Merchant HA, Bisharat L, Basheti IA, Bonacucina G, Cespi M, Palmieri GF. Hand sanitisers amid CoViD-19: A critical review of alcohol-based products on the market and formulation approaches to respond to increasing demand. Int J Pharm 2020; 584:119431. [PMID: 32461194 PMCID: PMC7229736 DOI: 10.1016/j.ijpharm.2020.119431] [Citation(s) in RCA: 101] [Impact Index Per Article: 25.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2020] [Revised: 05/11/2020] [Accepted: 05/12/2020] [Indexed: 01/01/2023]
Abstract
The world is facing a medical crisis amid the CoViD-19 pandemic and the role of adequate hygiene and hand sanitisers is inevitable in controlling the spread of infection in public places and healthcare institutions. There has been a great surge in demand for hand sanitisation products leading to shortages in their supply. A consequent increase of substandard products in the market has raised safety concerns. This article, therefore, presents a critical review of hand sanitation approaches and products available on the market in light of the scientific evidence available to date. This review also provides a range of hand sanitisation product formulations, and manufacturing instructions to allow for extemporaneous preparations at the community and hospital pharmacies during this urgent crisis. In addition, this emergent situation is expected to continue, hence hand sanitisers will be in demand for an extended time, and the availability and purchase of substandard products on the market create an ongoing safety concern. Therefore, this article shall also provide various commercial organisations, interested in stepping forward the production and marketing of hand sanitisers, with a guide on the development of products of standardised ingredients and formulations.
Collapse
|
117
|
Sfynia C, Bond T, Kanda R, Templeton MR. The formation of disinfection by-products from the chlorination and chloramination of amides. CHEMOSPHERE 2020; 248:125940. [PMID: 32006828 DOI: 10.1016/j.chemosphere.2020.125940] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/02/2019] [Revised: 01/14/2020] [Accepted: 01/16/2020] [Indexed: 06/10/2023]
Abstract
This study examined the potential of six aliphatic and aromatic amides, commonly found in natural waters or used as chemical aids in water treatment, to act as organic precursors for nine haloacetamides (HAcAms), five haloacetonitriles (HANs), regulated trihalomethanes (THMs) and haloacetic acids (HAAs) upon chlorination and chloramination. The impact of key experimental conditions, representative of drinking water, including pH (7 & 8), retention time (4 & 24 h) and bromide levels (0 & 100 μg/L), on the generation of the target DBPs was investigated. The highest aggregate DBP yields upon chlor(am)ination were reported for the aromatic and hydrophobic hydroxybenzamide; 2.7% ± 0.1% M/M (chlorination) and 1.7% M/M (chloramination). Increased reactivity was observed in aliphatic and hydrophilic compounds, acrylamide (2.5 ± 0.2% M/M) and acetamide (1.3 ± 0.2% M/M), in chlorination and chloramination, respectively. The addition of bromide increased average DBP yields by 50-70%. Relative to chlorination, the application of chloramines reduced DBP formation by 66.5% (without Br-) and by 46.4% (with Br-). However, bromine incorporation in HAAs and HAcAms was enhanced following chloramination, of concern due to the higher toxicological potency of brominated compounds.
Collapse
|
118
|
Lin H, Dai Q, Zheng L, Hong H, Deng W, Wu F. Radial basis function artificial neural network able to accurately predict disinfection by-product levels in tap water: Taking haloacetic acids as a case study. CHEMOSPHERE 2020; 248:125999. [PMID: 32006834 DOI: 10.1016/j.chemosphere.2020.125999] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/18/2019] [Revised: 01/21/2020] [Accepted: 01/21/2020] [Indexed: 06/10/2023]
Abstract
Control of risks caused by disinfection by-products (DBPs) requires pre-knowledge of their levels in drinking water. In this study, a radial basis function (RBF) artificial neural network (ANN) was proposed to predict the concentrations of haloacetic acids (HAAs, one dominant class of DBPs) in actual distribution systems. To train and verify the RBF ANN, a total of 64 samples taken from a typical region (Jinhua region) in China were characterized in terms of water characteristics (dissolved organic carbon (DOC), ultraviolet absorbance at 254 nm (UVA254), NO2--N level, NH4+-N level, Br- and pH), temperature and the prevalent HAAs concentrations. Compared with multiple linear/log linear regression (MLR) models, predictions done by RBF ANNs showed rather higher regression coefficients and accuracies, indicating the high capability of RBF ANNs to depict complicated and non-linear relationships between HAAs formation and various factors. Meanwhile, it was found that, predictions of HAAs formation done by RBF ANNs were efficient and allowed to further improve the prediction accuracy. This is the first study to systematically explore feasibility of RBF ANNs in prediction of DBPs. Accurate predictions by RBF ANNs provided great potential application of DBPs monitoring in actual distribution system.
Collapse
|
119
|
Doster E, Lakin SM, Dean CJ, Wolfe C, Young JG, Boucher C, Belk KE, Noyes NR, Morley PS. MEGARes 2.0: a database for classification of antimicrobial drug, biocide and metal resistance determinants in metagenomic sequence data. Nucleic Acids Res 2020; 48:D561-D569. [PMID: 31722416 PMCID: PMC7145535 DOI: 10.1093/nar/gkz1010] [Citation(s) in RCA: 169] [Impact Index Per Article: 42.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/15/2019] [Revised: 10/09/2019] [Accepted: 11/06/2019] [Indexed: 11/12/2022] Open
Abstract
Antimicrobial resistance (AMR) is a threat to global public health and the identification of genetic determinants of AMR is a critical component to epidemiological investigations. High-throughput sequencing (HTS) provides opportunities for investigation of AMR across all microbial genomes in a sample (i.e. the metagenome). Previously, we presented MEGARes, a hand-curated AMR database and annotation structure developed to facilitate the analysis of AMR within metagenomic samples (i.e. the resistome). Along with MEGARes, we released AmrPlusPlus, a bioinformatics pipeline that interfaces with MEGARes to identify and quantify AMR gene accessions contained within a metagenomic sequence dataset. Here, we present MEGARes 2.0 (https://megares.meglab.org), which incorporates previously published resistance sequences for antimicrobial drugs, while also expanding to include published sequences for metal and biocide resistance determinants. In MEGARes 2.0, the nodes of the acyclic hierarchical ontology include four antimicrobial compound types, 57 classes, 220 mechanisms of resistance, and 1,345 gene groups that classify the 7,868 accessions. In addition, we present an updated version of AmrPlusPlus (AMR ++ version 2.0), which improves accuracy of classifications, as well as expanding scalability and usability.
Collapse
|
120
|
Lara HH, Ixtepan-Turrent L, Yacaman MJ, Lopez-Ribot J. Inhibition of Candida auris Biofilm Formation on Medical and Environmental Surfaces by Silver Nanoparticles. ACS APPLIED MATERIALS & INTERFACES 2020; 12:21183-21191. [PMID: 31944650 PMCID: PMC8243355 DOI: 10.1021/acsami.9b20708] [Citation(s) in RCA: 49] [Impact Index Per Article: 12.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/22/2023]
Abstract
Candida auris is an emerging pathogenic fungus implicated in healthcare-associated outbreaks and causes bloodstream infections associated with high mortality rates. Biofilm formation represents one of the major pathogenetic traits associated with this microorganism. Unlike most other Candida species, C. auris has the ability to survive for weeks on different surfaces. Therefore, there is an urgent need to develop new effective control strategies to combat the threat of C. auris. Advances in nanotechnologies have emerged that carry significant potential impact against Candida biofilms. We obtained pure round silver nanoparticles (AgNPs) (1 to 3 nm in diameter) using a microwave-assisted synthetic approach. When tested against C. auris, our results indicated a potent inhibitory activity both on biofilm formation (half maximal inhibitory concentration (IC50) of 0.06 ppm) and against preformed biofilms (IC50 of 0.48 ppm). Scanning electron microscopy images of AgNP-treated biofilms showed cell wall damage mostly by disruption and distortion of the outer surface of the fungal cell wall. In subsequent experiments AgNPs were used to functionalize medical and environmental surfaces. Silicone elastomers functionalized with AgNPs demonstrated biofilm inhibition (>50%) at relatively low concentrations (2.3 to 0.28 ppm). Bandage dressings loaded with AgNPs inhibited growth of C. auris biofilms by more than 80% (2.3 to 0.017 ppm). Also, to demonstrate long-lasting protection, dressings loaded with AgNPs (0.036 ppm) were washed thoroughly with phosphate-buffered saline, maintaining protection against the C. auris growth from cycles 1 to 3 (>80% inhibition) and from cycles 4 to 6 (>50% inhibition). Our results demonstrate the dose-dependent activity of AgNPs against biofilms formed by C. auris on both medical (silicone elastomer) and environmental (bandage fibers) surfaces. The AgNPs-functionalized fibers retain the fungicidal effect even after repeated thorough washes. Overall these results point to the utility of silver nanoparticles to prevent and control infections caused by this emerging pathogenic fungus.
Collapse
|
121
|
Krumm C, Trump S, Benski L, Wilken J, Oberhaus F, Köller M, Tiller JC. Fast-Acting Antibacterial, Self-Deactivating Polyionene Esters. ACS APPLIED MATERIALS & INTERFACES 2020; 12:21201-21209. [PMID: 31916737 DOI: 10.1021/acsami.9b19313] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Biocidal compounds that quickly kill bacterial cells and are then deactivated in the surrounding without causing environmental problems are of great current interest. Here, we present new biodegradable antibacterial polymers based on polyionenes with inserted ester functions (PBI esters). The polymers are prepared by polycondensation reaction of 1,4-dibromobutene and different tertiary diaminodiesters. The resulting PBI esters are antibacterially active against a wide range of bacterial strains and were found to quickly kill these cells within 1 to 10 min. Because of hydrolysis of the ester groups, the PBI esters are degraded and deactivated in aqueous media. The degradation rate depends on the backbone structure and the pH. The structure of the polymers also controls the deactivation mechanism. While the more hydrophilic polymers require hydrolyses of only 19 to 30% of the ester groups to become practically inactive, the more hydrophobic PBI esters require up to 85% hydrolysis to achieve the same result. Thus, depending on the environmental conditions and the chemical nature, the PBI esters can be active for only 20 min or for at least one week.
Collapse
|
122
|
Liu S, Zheng J, Hao L, Yegin Y, Bae M, Ulugun B, Taylor TM, Scholar EA, Cisneros-Zevallos L, Oh JK, Akbulut M. Dual-Functional, Superhydrophobic Coatings with Bacterial Anticontact and Antimicrobial Characteristics. ACS APPLIED MATERIALS & INTERFACES 2020; 12:21311-21321. [PMID: 32023023 DOI: 10.1021/acsami.9b18928] [Citation(s) in RCA: 33] [Impact Index Per Article: 8.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Bacterial pathogens are responsible for millions of cases of illnesses and deaths each year throughout the world. The development of novel surfaces and coatings that effectively inhibit and prevent bacterial attachment, proliferation, and growth is one of the crucial steps for tackling this global challenge. Herein, we report a dual-functional coating for aluminum surfaces that relies on the controlled immobilization of lysozyme enzyme (muramidase) into interstitial spaces of presintered, nanostructured thin film based on ∼200 nm silica nanoparticles and the sequential chemisorption of an organofluorosilane to the available interfacial areas. The mean diameter of the resultant lysozyme microdomains was 3.1 ± 2.5 μm with an average spacing of 8.01 ± 6.8 μm, leading to a surface coverage of 15.32%. The coating had an overall root-mean-square (rms) roughness of 539 ± 137 nm and roughness factor of 1.50 ± 0.1, and demonstrated static, advancing, and receding water contact angles of 159.0 ± 1.0°, 155.4 ± 0.6°, and 154.4 ± 0.6°, respectively. Compared to the planar aluminum, the coated surfaces produced a 6.5 ± 0.1 (>99.99997%) and 4.0 ± 0.1 (>99.99%) log-cycle reductions in bacterial surfaces colonization against Gram-negative Salmonella Typhimurium LT2 and Gram-positive Listeria innocua, respectively. We anticipate that the implementation of such a coating strategy on healthcare environments and surfaces and food-contact surfaces can significantly reduce or eliminate potential risks associated with various contamination and cross-contamination scenarios.
Collapse
|
123
|
Song B, Zhang E, Han X, Zhu H, Shi Y, Cao Z. Engineering and Application Perspectives on Designing an Antimicrobial Surface. ACS APPLIED MATERIALS & INTERFACES 2020; 12:21330-21341. [PMID: 32011846 PMCID: PMC7534184 DOI: 10.1021/acsami.9b19992] [Citation(s) in RCA: 54] [Impact Index Per Article: 13.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/04/2023]
Abstract
Infections, contaminations, and biofouling resulting from micro- and/or macro-organisms remained a prominent threat to the public health, food industry, and aqua-/marine-related applications. Considering environmental and drug resistance concerns as well as insufficient efficacy on biofilms associated with conventional disinfecting reagents, developing an antimicrobial surface potentially improved antimicrobial performance by directly working on the microbes surrounding the surface area. Here we provide an engineering perspective on the logic of choosing materials and strategies for designing antimicrobial surfaces, as well as an application perspective on their potential impacts. In particular, we analyze and discuss requirements and expectations for specific applications and provide insights on potential misconnection between the antimicrobial solution and its targeted applications. Given the high translational barrier for antimicrobial surfaces, future research would benefit from a comprehensive understanding of working mechanisms for potential materials/strategies, and challenges/requirements for a targeted application.
Collapse
|
124
|
Yuan H, Zhao H, Peng K, Qi R, Bai H, Zhang P, Huang Y, Lv F, Liu L, Bao J, Wang S. Conjugated Polymer-Quantum Dot Hybrid Materials for Pathogen Discrimination and Disinfection. ACS APPLIED MATERIALS & INTERFACES 2020; 12:21263-21269. [PMID: 31825194 DOI: 10.1021/acsami.9b17783] [Citation(s) in RCA: 23] [Impact Index Per Article: 5.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/26/2023]
Abstract
In this work, a new platform for pathogen discrimination and killing based on a conjugated polymer-quantum dot hybrid material was designed and constructed through the fluorescence resonance energy transfer (FRET) process. The hybrid material comprises water-soluble anionic CdSe/ZnS quantum dots (QDs) and a cationic poly(fluorene-alt-phenylene) derivative (PFP) through electrostatic interactions, thus promoting efficient FRET between PFP and QDs. Upon addition of different pathogen strains, the FRET from PFP to QDs was interrupted because of the competitive binding between PFP and the pathogens. Complexation of PFP and QDs also reduced the dark toxicity to a more desirable level, therefore potentially realizing the controllable killing of pathogens. The technique provides a promising theranostic platform in pathogen discrimination and disinfection based on FRET and phototoxicity of the PFP and QDs.
Collapse
|
125
|
Wang WL, Chen Z, Du Y, Zhang YL, Zhou TH, Wu QY, Hu HY. Elimination of isothiazolinone biocides in reverse osmosis concentrate by ozonation: A two-phase kinetics and a non-linear surrogate model. JOURNAL OF HAZARDOUS MATERIALS 2020; 389:121898. [PMID: 31879104 DOI: 10.1016/j.jhazmat.2019.121898] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/28/2019] [Revised: 12/10/2019] [Accepted: 12/13/2019] [Indexed: 06/10/2023]
Abstract
Elimination of commercial Kathon biocide (methyl-isothiazolinone (MIT) and chloro-methyl-isothiazolinone (CMIT) mixture) by ozonation was investigated in real RO influent and concentrate. MIT and CMIT had different reactivities (second-order-rate-constants) with molecular ozone and OH. Ozonation of biocides followed an instantaneous phase (16.6 %-36.9 % contributions) and then a gradual phase (33.6 %-78.8 % contributions). Newly developed kinetics including both phases demonstrated that O3 oxidation contributed 25.6 %-39.8 % and <10 % of MIT and CMIT eliminations, respectively, and OH oxidation contributed 60.2 %-74.4 % and >90 % of MIT and CMIT eliminations, respectively. OH oxidation at the instantaneous phase accounted 15.7 %-37.9 % of total OH oxidation. Mass ratios of O3/DOC of 0.24 and 0.32 were needed for ∼80 % eliminations of MIT and CMIT in RO concentrate, respectively. The kinetics including both phases allowed a para-chlorobenzoic acid indicator model to predict MIT and CMIT elimination better than that including gradual ozonation only, with 58.9 %-96.0 % lower relative error. The attenuations of electron-donating-moiety indicated that O3 may preferentially react with chromophores through aromatic cleavage and electrophilic extraction, while •OH may non-selectively react with chromophores through predominant electrophilic addition. A surrogate model for biocide elimination by UVA254 loss was proposed to be nonlinear rather than linear, which reduced 31.8 %-71.3 % surrogating error.
Collapse
|