An investigation of biooxidation ability of Acidithiobacillus ferrooxidans using NMR relaxation measurement

NMR relaxation measurements can provide a simple means for understanding biological activity of cells in solution with known composition. It has the advantage that it is an in situ, non-intrusive technique, and the acquisition is fast. The iron oxidation ability of Acidithiobacillus ferrooxidans was investigated using NMR relaxation measurements. The transversal relaxation is characterized by a time constant, T₂, which is sensitive to the chemical environment. Fe³⁺ ion has more significant T₂ shortening than Fe²⁺ ion. In the presence of A. ferrooxidans in solutions containing Fe²⁺ ion, T₂ shortening was found with increasing time as the bacteria oxidize Fe²⁺ to Fe³⁺ ions. In the optimal growth medium, the bacteria concentration increased 80 times and high iron oxidation rate was found. In 10 mM K₂SO₄ medium, however, bacteria concentration remained almost unchanged and the iron oxidation rate was significantly lower.

[Leaching of copper ore of the Udokanskoe deposit at low temperatures by an association of acidophilic chemolithotrophic microorganisms]

Pure cultures of indigenous microorganisms Acidithiobacillus ferrooxidans strain TFUd, Leptospirillum ferrooxidans strain LUd, and Sulfobacillus thermotolerans strain SUd have been isolated from the oxidation zone of sulfide copper ore of the Udokanskoe deposit. Regimes of bacterial-chemical leaching of ore have been studied over a temperature range from -10 to +20 degrees C. Effects of pH, temperature, and the presence of microorganisms on the extraction of copper have been shown. Bacterial leaching has been detected only at positive values of temperature, and has been much more active at +20 than at +4 degrees C. The process of leaching was more active when the ore contained more hydrophilic and oxidized minerals. The possibility of copper ore leaching of the Udokanskoe deposit using sulfuric acid with pH 0.4 at negative values of temperature and applying acidophilic chemolithotrophic microorganisms at positive values of temperature and low pH values was shown.

Adsorptive removal of As(III) by biogenic schwertmannite from simulated As-contaminated groundwater

This study investigates synthesis of biogenic schwertmannite by Acidithiobacillus ferrooxidans and its role and mechanism in adsorption of As(III) from water. Results indicate that schwertmannite particles formed through oxidation of ferrous sulfate by A. ferrooxidans cells for different times vary greatly in size and in morphology. The hedge-hog like schwertmannite formed after reaction for 72h are aggregative spheroid particles with a diameter of approximately 2.5μm and its chemical formula can be expressed as Fe(8)O(8)(OH)(4.42)(SO(4))(1.79). Batche studies show that both Freundlich and Langmuir model are suitable for describing the adsorption behavior of As(III) on schwertmannite at pH 7.5 and As(III) in simulated groundwater can be effectively removed by biogenic schwertmannite with a maximum adsorption capacity of 113.9mg As(III) g(-1) and the optimal pH is in the range of 7-10. The arsenic removal is hardly affected by the competing anions often observed in groundwater unless the mole concentration of PO(4)(3-) and SO(4)(2-) in groundwater are 75 or 750 times higher than As(III), respectively. The mechanism of As(III) adsorption on biogenic schwertmannite involves ligand exchanges between arsenic species and surface hydroxyl group and sulfate. In addition, experiments show that As(III)-sorbed biogenic schwertmannite aged in deionized water at 25°C exhibits no mineralogy phase changes even after ageing at pH 6.0 and 8.5 for 90d.

Column bioleaching of uranium embedded in granite porphyry by a mesophilic acidophilic consortium

A mesophilic acidophilic consortium was enriched from acid mine drainage samples collected from several uranium mines in China. The performance of the consortium in column bioleaching of low-grade uranium embedded in granite porphyry was investigated. The influences of several chemical parameters on uranium extraction in column reactor were also investigated. A uranium recovery of 96.82% was achieved in 97 days column leaching process including 33 days acid pre-leaching stage and 64 days bioleaching stage. It was reflected that indirect leaching mechanism took precedence over direct. Furthermore, the bacterial community structure was analyzed by using Amplified Ribosomal DNA Restriction Analysis. The results showed that microorganisms on the residual surface were more diverse than that in the solution. Acidithiobacillus ferrooxidans was the dominant species in the solution and Leptospirillum ferriphilum on the residual surface.

Extraction of manganese from electrolytic manganese residue by bioleaching

Extraction of manganese from electrolytic manganese residues using bioleaching was investigated in this paper. The maximum extraction efficiency of Mn was 93% by sulfur-oxidizing bacteria at 4.0 g/l sulfur after bioleaching of 9days, while the maximum extraction efficiency of Mn was 81% by pyrite-leaching bacteria at 4.0 g/l pyrite. The series bioleaching first by sulfur-oxidizing bacteria and followed by pyrite-leaching bacteria evidently promoted the extraction of manganese, witnessing the maximum extraction efficiency of 98.1%. In the case of sulfur-oxidizing bacteria, the strong dissolution of bio-generated sulfuric acid resulted in extraction of soluble Mn2+, while both the Fe2+ catalyzed reduction of Mn4+ and weak acidic dissolution of Mn2+ accounted for the extraction of manganese with pyrite-leaching bacteria. The chemical simulation of bioleaching process further confirmed that the acid dissolution of Mn2+ and Fe2+ catalyzed reduction of Mn4+ were the bioleaching mechanisms involved for Mn extraction from electrolytic manganese residues.

Effects of chloride acclimation on iron oxyhydroxides and cell morphology during cultivation of Acidithiobacillus ferrooxidans

Iron oxyhydroxides as the efficient scavengers for heavy metals have been extensively investigated in iron-rich acid sulfate waters in the presence of Acidithiobacillus ferrooxidans (A. ferrooxidans, an especially important chemolithoautotroph for bioleaching and desulfurization of coal). In this study, we observed the morphology and elemental composition of cells in stationary phase and examined the dynamic variation of iron oxyhydroxides produced in cultures of A. ferrooxidans incubated in modified 9K medium initially including 0.15 M of ferrous iron, in the absence/presence of 0.2 M of chloride (NaCl/FeCl(2)). Results showed that chloride acclimation had little effect on cellular morphology and elemental uptake that was mainly related to culture medium. Furthermore, schwertmannite with the typical morphology of aggregated spheres covered by some "pincushions" was precipitated first in bacterial cultures in the favorable pH range of 2.9 ± 0.1 to 2.6 ± 0.1. Some of schwertmannite could be transformed to lozenge-shaped jarosite, due to a successively decreasing of pH values. However, the jarosite transformation represented a lag period of 5 and 4 days in the chloride-rich cultures with sulfate at a low level, compared to the cultures with sulfate at a high level, which could be attributed to the influence of sulfate requirement and chloride acclimation.

[Difference in acclimation of Acidithiobacillus ferrooxidans by various substrates and its effect on coal desulfurization efficiency]

In this study, Acidithiobacillus ferrooxidans LX5 was cultured in 9K medium with pyrite and ferrous sulfate as the substrates. Results showed that the number of A. ferrooxidans LX5 acclimated by pyrite for 20 d was 3.0 x 10(7) cell/mL in the liquid, and the oxidation activity to pyrite was stronger. A. ferrooxidans LX5 cultured for 48 h was 1.0 x 10(8) cell/mL in medium with FeSO4. Extracellular polymeric substance (EPS) produced from A. ferrooxidans LX5 acclimated by pyrite was 2 395 microg/(10(10) cells) three times as much as that cultured with FeSO4. A high-sulfur coal desulfurization experiment were carried out with A. ferrooxidans LX5 domesticated respectively in medium with ferrous sulfate and pyrite. The results showed that the coal desulfurization rate was up to 72.4% after bioleaching for 13 d by A. ferrooxidans LX5 acclimated by pyrite, at the same time, the desulfurization rate was only 47.2% with A. ferrooxidans LX5 cultured with ferrous sulfate and reached 65.8% in 20 d. Therefore, the desulfurization efficiency can be improved of coal and shorten the desulfurization time when A. ferrooxidans LX5 acclimated with pyrite as the substrate.

Effects of cell condition, pH, and temperature on lead, zinc, and copper sorption to Acidithiobacillus caldus strain BC13

This study describes the effects of cell condition, pH, and temperature on lead, zinc, and copper sorption to Acidithiobacillus caldus strain BC13 with a Langmuir model. Copper exhibited the highest loading capacity, 4.76 ± 0.28 mmol g(-1), to viable cells at pH 5.5. The highest k(L) (binding-site affinity) observed was 61.2 ± 3.0 L mmol(-1) to dehydrated cells at pH 4.0. The pHs that maximized loading capacities and binding-site affinities were generally between 4.0 and 5.5, where the sum of free-proton and complexed-metal concentrations was near a minimum. Of additional importance, lead, zinc, and copper sorbed to viable cells at pH values as low as 1.5. Previous studies with other acidithiobacilli did not measure viable-cell sorption below pH 4.0. In separate experiments, desorption studies showed that far less copper was recovered from viable cells than any other metal or cell condition, suggesting that uptake may play an important role in copper sorption by At. caldus strain BC13. To reflect an applied system, the sorption of metal mixtures was also studied. In these experiments, lead, zinc, and copper sorption from a tertiary mixture were 40.2 ± 4.3%, 28.7 ± 3.8%, and 91.3 ± 3.0%, respectively, of that sorbed in single-metal systems.

Zinc and lead leaching from contaminated industrial waste sludges using coupled processes

Metal pollution of solid matrices, like soils, sediments and sludge, is widespread across the globe, and the clean-up of these matrices presents many difficulties. The aim of this study was to develop an efficient leaching technique for metal removal from an industrial carbon sludge contaminated with Zn (8600 mg kg(-1)) and Pb (389 mg kg(-1)). To this end, the possibility of coupling processes, such as extraction with mineral acids, EDTA addition, ultrasound and bioleaching, was investigated. Lead, but not zinc, was totally removed by EDTA treatment (1200 mg L(-1), pH 6.0). Ultrasound treatment was ineffective in metal leaching at all tested pH values, either with or without EDTA addition, probably because of the reduction in size of the carbon particles and the concomitant increase in surface area available for metal binding. A ferrous-iron-oxidizing, endogenous microflora lixiviated 90% of Zn at pH 2.5 in seven days, whereas, after the addition of Acidithiobacillus ferrooxidans, 100% of Zn was removed within four days. These results indicated that the clean-up process for the metal-contaminated sludge should combine an initial chelation step with Na-EDTA (pH 6.0) for complete removal of Pb, followed by a second bioleaching step with A. ferrooxidans for total removal of Zn.

Effects of ferrous sulfate, inoculum history, and anionic form on lead, zinc, and copper toxicity to Acidithiobacillus caldus strain BC13

The current study reports the single and combined toxicities of Pb, Zn, and Cu to Acidithiobacillus caldus strain BC13. The observed half-maximal inhibitory concentrations (IC50), ± 95% confidence intervals, for Pb, Zn, and Cu were 0.9 ± 0.1 mM, 39 ± 0.5 mM, and 120 ± 8 mM, respectively. The observed minimum inhibitory concentrations (MIC) for Pb, Zn, and Cu were 7.5 mM, 75 mM, and 250 mM, respectively. When metals were presented in binary mixtures, the toxicities were less than additive. For example, when 50% of the Pb MIC and 50% of the Cu MIC were presented together, the specific growth rate was inhibited by only 59 ± 3%, rather than 100%. In addition, the presence of ferrous iron in the growth media decreased Pb and Zn toxicity to A. caldus strain BC13. The importance of inoculum history was evaluated by pre-adapting cultures through subsequent transfers in the presence of Pb, Zn, and Cu at their respective IC50s. After pre-adaptation, cultures had specific growth rates 39 ± 11, 32 ± 7, and 28 ± 12% higher in the presence of Pb, Zn, and Cu IC50s, respectively, compared with cultures that had not been pre-adapted. In addition, when cells exposed to the MICs of Pb, Zn, and Cu were harvested, washed, and re-inoculated into fresh, metal-free medium, they grew, showing that the cells remained viable with little residual toxicity. Finally, metal chlorides showed more toxicity than metal sulfates, and studies using sodium chloride or a mixture of metal sulfates and sodium chloride suggested that this was attributable to an additive combination of the metal and chloride toxicities.

Heterotrophic microorganism Rhodotorula mucilaginosa R30 improves tannery sludge bioleaching through elevating dissolved CO2 and extracellular polymeric substances levels in bioleach solution as well as scavenging toxic DOM to Acidithiobacillus species

The introduction of acid-tolerant heterotrophic microorganisms into sludge bioleaching systems has been proven effective in improving sludge bioleaching processes, and such positive effect is mainly attributed to the biodegradation of low molecular weight organic acids or sludge dissolved organic matter (DOM) toxic to Acidithiobacillus species by the heterotrophic microorganisms introduced. Here we report that elevated dissolved CO(2) concentration and resulting extracellular polymeric substances (EPS) in bioleach solution due to the incorporation of heterotrophic microorganisms also play important roles in improving sludge bioleaching. It was found that in tannery sludge bioleaching system coinoculated with Rhodotorula mucilaginosa R30 and Acidithiobacillus species, dissolved CO(2) concentration in bioleach solution can be elevated from 0.23-0.54 mg/L to 0.76-1.01 mg/L compared to the control inoculated only with Acidithiobacillus species. Correspondingly, the distinct degradation of sludge DOM was also observed in this experiment. It was experimentally demonstrated that the accumulation of CO(2) did greatly enhance the growth of Acidithiobacillus thiooxidans and the decrease rate of pH in the medium. In addition, EPS derived from R. mucilaginosa R30 could bind readily Fe(3+) in bioleach solution with maximum binding capacity (MBC) of 0.82 mg Fe(3+) by per mg DOC of EPS secreted and the oxidization activity of EPS-bound Fe(3+) was decreased but not totally inhibited, indicating that the formation of soluble EPS-Fe(III) complexes enhances, to a certain extent, bioleaching efficiency due to maintaining Fe(3+) level in solution by inhibiting Fe precipitation occurrence.

Non-homogeneous biofilm modeling applied to bioleaching processes

A two-dimensional non-homogeneous biofilm model is proposed for the first time to study chemical and biochemical reactions at the microorganism scale applied to biological metal leaching from mineral ores. The spatial and temporal relation between these reactions, microorganism growth and the morphological changes of the biofilm caused by solid inorganic precipitate formation were studied using this model. The model considers diffusion limitations due to accumulation of inorganic particles over the mineral substratum, and allows the study of the effect of discrete phases on chemical and microbiological mineral solubilization. The particle-based modeling strategy allowed representation of contact reactions between the microorganisms and the insoluble precipitates, such as those required for sulfur attack and solubilization. Time-dependent simulations of chemical chalcopyrite leaching showed that chalcopyrite passivation occurs only when an impervious solid layer is formed on the mineral surface. This mineral layer hinders the diffusion of one kinetically determinant mineral-attacking chemical species through a nearly irreversible chemical mechanism. Simulations with iron and sulfur oxidizing microorganisms revealed that chemolithoautotrophic biofilms are able to delay passivation onset by formation of corrosion pits and increase of the solid layer porosity through sulfur dissolution. The model results also show that the observed flat morphology of bioleaching biofilms is favored preferentially at low iron concentrations due to preferential growth at the biofilm edge on the surface of sulfur-forming minerals. Flat biofilms can also be advantageous for chalcopyrite bioleaching because they tend to favor sulfur dissolution over iron oxidation. The adopted modeling strategy is of great interest for the numerical representation of heterogeneous biofilm systems including abiotic solid particles.

Organoarsenic resistance and bioremoval of Acidithiobacillus ferrooxidans

The tolerance and bioremoval of dimethylarsinic acid (DMA(V)) by Acidithiobacillus ferrooxidans (A. ferrooxidans) were investigated here. The inhibitory concentration (IC) of DMA(V) was determined for A. ferrooxidans. The effects of various parameters such as pH, contact time, initial DMA(V) concentration, biosorbent dose and temperature were systematically examined to study the biosorption processes. Results indicated that Langmuir model fitted better than Freundlich model to the equilibrium data. Analysis of kinetic data showed that the biosorption processes of DMA(V) involved pseudo-second-order kinetics. Thermodynamic analysis showed that the biosorption of DMA(V) onto A. ferrooxidans was feasible, spontaneous, endothermic and chemisorptive under examined conditions. Fourier transform infrared spectroscopy (FTIR) showed the involvement of -OH, -NH and -SO(3) groups in the biosorption process.

Metal recovery from spent refinery catalysts by means of biotechnological strategies

A bioleaching study aimed at recovering metals from hazardous spent hydroprocessing catalysts was carried out. The exhaust catalyst was rich in nickel (4.5 mg/g), vanadium (9.4 mg/g) and molybdenum (4.4 mg/g). Involved microorganisms were iron/sulphur oxidizing bacteria. Investigated factors were elemental sulphur addition, ferrous iron addition and actions contrasting a possible metal toxicity (either adding powdered activated charcoal or simulating a cross current process by means of periodical filtration). Ferrous iron resulted to be essential for metal extraction: nickel and vanadium extraction yields were 83% and 90%, respectively, while about 50% with no iron. The observed values for molybdenum extraction yields were not as high as Ni and V ones (the highest values were around 30-40%). The investigated actions aimed at contrasting a possible metal toxicity resulted not to be effective; in contrast, sequential filtration of the liquor leach had a significant negative effect on metals extraction. Nickel and vanadium dissolution kinetics resulted to be significantly faster than molybdenum dissolution ones. Furthermore, a simple first order kinetic model was successfully fitted to experimental data. All the observed results supported the important role of the indirect mechanism in bioleaching of LC-Finer catalysts.

Bioleaching kinetics and multivariate analysis of spent petroleum catalyst dissolution using two acidophiles

Bioleaching studies were conducted to evaluate the recovery of metal values from waste petroleum catalyst using two different acidophilic microorganisms, Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. Various leaching parameters such as contact time, pH, oxidant concentration, pulp densities, particle size, and temperature were studied in detail. Activation energy was evaluated from Arrhenius equation and values for Ni, V and Mo were calculated in case of both the acidophiles. In both cases, the dissolution kinetics of Mo was lower than those of V and Ni. The lower dissolution kinetics may have been due to the formation of a sulfur product layer, refractoriness of MoS(2) or both. Multivariate statistical data were presented to interpret the leaching data in the present case. The significance of the leaching parameters was derived through principle component analysis and multi linear regression analyses for both iron and sulfur oxidizing bacteria.

Comparative evaluation of microbial and chemical leaching processes for heavy metal removal from dewatered metal plating sludge

The purpose of the study described in this paper was to evaluate the application of bioleaching technique involving Acidithiobacillus ferrooxidans to recover heavy metals (Zn, Cu, Ni, Pb, Cd and Cr) in dewatered metal plating sludge (with no sulfide or sulfate compounds). The effect of some conditional parameters (i.e. pH, oxidation-reduction potential (ORP), sulfate production) and operational parameters (i.e. pulp density of the sludge and agitation time) were investigated in a 3l completely mixed batch (CMB) reactor. The metal recovery yields in bioleaching were also compared with chemical leaching of the sludge waste using commercial inorganic acids (sulfuric acids and ferric chloride). The leaching of heavy metals increased with decreasing of pH and increasing of ORP and sulfate production during the bioleaching experiment. Optimum pulp density for bioleaching was observed at 2% (w/v), and leaching efficiency decreased with increasing pulp density in bioleaching experiments. Maximum metal solubilization (97% of Zn, 96% of Cu, 93% of Ni, 84% of Pb, 67% of Cd and 34% of Cr) was achieved at pH 2, solids contents of 2% (w/v), and a reaction temperature of 25+/-2 degrees C during the bioleaching process. The maximum removal efficiencies of 72% and 79% Zn, 70% and 75% Cu, 69% and 73% Ni, 57% and 70% Pb, 55% and 65% Cd, and 11% and 22% Cr were also attained with the chemical leaching using sulfuric acids and ferric chloride, respectively, at pH 2, solids contents of 2% (w/v), and a reaction temperature of 25+/-2 degrees C during the acid leaching processes. The rates of metal leaching for bioleaching and chemical leaching are well described by a kinetic equation related to time. Although bioleaching generally requires a longer period of operation compared to chemical leaching, it achieves higher removal efficiency for heavy metals. The efficiency of leaching processes can be arranged in descending order as follows: bioleaching>ferric chloride leaching>sulfuric acid leaching. These results suggest that bioleaching may be an alternative or adjunct to conventional physicochemical treatment of dewatered metal plating sludge for the removal hazardous heavy metals.

Functional roles of the aromatic residues in the stabilization of the [Fe(4)S(4)] cluster in the Iro protein from Acidithiobacillus ferrooxidans

The Iro protein is a member of HiPIP family with the [Fe(4)S(4)] cluster for electron transfer. Many reports proposed that the conserved aromatic residues might be responsible for the stability of the iron-sulfur cluster in HiPIP. In this study, Tyr10 was found to be a critical residue for the stability of the [Fe(4)S(4)] cluster according to site-directed mutagenesis results. Tyr10, Phe26 and Phe48 were essential for the stability of the [Fe(4)S(4)] cluster under acidic condition. Trp44 were not involved in the stability of the [Fe(4)S(4)] cluster. Molecular structure modeling for the mutant Tyr10 proteins revealed that the aromatic group of Tyr10 may form a hydrophobic barrier to protect the [Fe(4)S(4)] cluster from solvent.

[Separation of magnetic bacteria by using a magnetic separator]

A magnetic separator was used to separate magnetic bacteria based on their magnetotactic characteristics. Acidithiobacillus ferrooxidans, a bacterium that could synthesize intra-cellular nanometer magnetic particles, was investigated as an example. Strong magnetic and weak magnetic cells were separated and collected. On average, the number of the magnetic particles present in the strong magnetic cells is more than that of the weak magnetic cells. Moreover, semisolid-plate magnetophoresis showed that the magnetotaxis of strong magnetic cells was stronger than the weak magnetic cells. These results suggest that the magnetic separator can be used to isolate the magnetic bacteria, which will facilitate the research of magnetic bacteria.

Bioleaching of ultramafic tailings by acidithiobacillus spp. for CO2 sequestration

Bioleaching experiments using various acid-generating substances, i.e., metal sulfides and elemental sulfur, were conducted to demonstrate the accelerated dissolution of chrysotile tailings collected from an asbestos mine near Clinton Creek, Yukon, Canada. Columns, possessing an acid-generating substance colonized with Acidithiobacillus sp., produced leachates with magnesium concentrations that were an order of magnitude greater than mine site waters or control column leachates. In addition, chrysotile tailings were efficient at neutralizing acidity, which resulted in the immobilization of metals (Fe, Cu, Zn) associated with the metal sulfide mine tailings that were used to generate acid. This suggests that tailings from acid mine drainage environments may be utilized to enhance chrysotile dissolution without polluting "downstream" ecosystems. These results demonstrate that the addition of an acid-generating substance in conjunction with a microbial catalyst can significantly enhance the release of magnesium ions, which are then available for the precipitation of carbonate minerals. This process, as part of a carbon dioxide sequestration program, has implications for reducing net greenhouse gas emissions in the mining industry.

Production of glycolic acid by chemolithotrophic iron- and sulfur-oxidizing bacteria and its role in delineating and sustaining acidophilic sulfide mineral-oxidizing consortia

Glycolic acid was detected as an exudate in actively growing cultures of three chemolithotrophic acidophiles that are important in biomining operations, Leptospirillum ferriphilum, Acidithiobacillus (At.) ferrooxidans, and At. caldus. Although similar concentrations of glycolic acid were found in all cases, the concentrations corresponded to ca. 24% of the total dissolved organic carbon (DOC) in cultures of L. ferriphilum but only ca. 5% of the total DOC in cultures of the two Acidithiobacillus spp. Rapid acidification (to pH 1.0) of the culture medium of At. caldus resulted in a large increase in the level of DOC, although the concentration of glycolic acid did not change in proportion. The archaeon Ferroplasma acidiphilum grew in the cell-free spent medium of At. caldus; glycolic acid was not metabolized, although other unidentified compounds in the DOC pool were metabolized. Glycolic acid exhibited levels of toxicity with 21 strains of acidophiles screened similar to those of acetic acid. The most sensitive species were chemolithotrophs (L. ferriphilum and At. ferrivorans), while the most tolerant species were chemoorganotrophs (Acidocella, Acidobacterium, and Ferroplasma species), and the ability to metabolize glycolic acid appeared to be restricted (among acidophiles) to Firmicutes (chiefly Sulfobacillus spp.). Results of this study help explain why Sulfobacillus spp. rather than other acidophiles are the main organic carbon-degrading bacteria in continuously fed stirred tanks used to bioprocess sulfide mineral concentrates and also why temporary cessation of pH control in these systems, resulting in rapid acidification, often results in a plume of the archaeon Ferroplasma.

Bioleaching of metals from printed wire boards by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans and their mixture

Bioleaching processes were used to mobilize metals from printed wire boards (PWBs). The bacteria Acidithiobacillus ferrooxidans (A. ferrooxidans) and Acidithiobacillus thiooxidans (A. thiooxidans) isolated from an acidic mine drainage were grown and acclimated in presence of PWBs and then used as bioleaching bacteria to solubilize metals from PWBs. The experimental results demonstrate that all the percentages of copper, lead, zinc solubilized into the leaching solution from actual PWBs basically increased with decrease of sieve fraction of sample and decrease of PWBs concentration. The concentration of PWBs should be controlled under the range from 7.8 to 19.5 g l(-1). Under 7.8 g l(-1) of the concentration of PWBs, the percentages of copper solubilized are 99.0%, 74.9%, 99.9% at 0.5-1.0mm of sieve fraction at 9 d of leaching time by the pure culture of A. ferrooxidans, the pure culture of A. thiooxidans, and mixed culture of A. ferrooxidans and A. thiooxidans, respectively, while the percentages of copper, lead and zinc solubilized are all more than 88.9% at <0.35 mm of the sieve fractions of sample at 5d of leaching time by the above three kinds of cultures. Variation of pH and redox potential of leaching solution with time implied that Fe(3+) oxidized from Fe(2+) in the culture medium in presence of A. ferrooxidans caused the mobilization of metals. It is concluded that A. ferrooxidans and A. thiooxidans were able to grow in the presence of PWBs and the pure culture of A. ferrooxidans, and the mixed culture of A. ferrooxidans and A. thiooxidans can not only efficiently bioleach the main metal copper but also bioleach other minor metals such as lead, zinc as well.

Microbial architecture of environmental sulfur processes: a novel syntrophic sulfur-metabolizing consortia

Microbial oxidation of sulfur-rich mining waste materials drives acid mine drainage (AMD) and affects the global sulfur biogeochemical cycle. The generation of AMD is a complex, dynamic process that proceeds via multiple reaction pathways. The role of natural consortia of microbes in AMD generation, however, has received very little attention despite their widespread occurrence in mining environments. Through a combination of geochemical experimentation and modeling, scanning transmission X-ray microscopy, and fluorescent in situ hybridization, we show a novel interdependent metabolic arrangement of two ubiquitous and abundant AMD bacteria: chemoautotrophic sulfur-oxidizing Acidithiobacillus sp. and heterotrophic Acidiphilium sp. Highly reminiscent of anaerobic methane oxidation (AOM) consortia, these bacteria are spatially segregated within a planktonic macrostructure of extracellular polymeric substance in which they syntrophically couple sulfur oxidation and reduction reactions in a mutually beneficial arrangement that regenerates their respective sulfur substrates. As discussed here, the geochemical impacts of microbial metabolism are linked to the consortial organization and development of the pod structure, which affects cell-cell interactions and interactions with the surrounding geochemical microenvironment. If these pods are widespread in mine waters, echoing the now widespread discovery of AOM consortia, then AMD-driven CO(2) atmospheric fluxes from H(2)SO(4) carbonate weathering could be reduced by as much as 26 TgC/yr. This novel sulfur consortial discovery indicates that organized metabolically linked microbial partnerships are likely widespread and more significant in global elemental cycling than previously considered.

[Recent research progress on the biomining bacteria of Acidithiobacillus caldus--a review]

Acidithiobacillus caldus (A. caldus) is one of the predominant biomining bacteria, which shows application prospect in biological metallurgy. It can enhance the biomining efficiency together with iron oxidation bacteria in mixed biomining system. Based on the published papers and our study on this bacterium, we described the research progress on it from four aspects, including the biomining mechanism, arsenic-resistant mechanism, genome study and genetic reconstruction. Furthermore, we discussed the prospects of research on A. caldus.

[Isolation, identification of Acidithiobacillus sp. and its role in the removal of heavy metals from contaminated sediments]

A sulfur-oxidizing bacterium FD97 was isolated from heavy metal-contaminated river sediments. According to the morphological characteristics and sequence analysis of 16S rDNA of FD97, the strain was identified as Acidithiobacillus sp.. The effects of temperature on heavy metals bioleaching efficiencies from contaminated sediments by using Acidithiobacillus sp. FD97 were investigated in shake flask experiments. The tests were performed at four different temperatures in the range of 22-40 degrees C. The results showed that after 16 days of bioleaching, almost 70% of Zn, 90% of Cu, and 25% of Cr could be removed from the sediments, respectively. From the variations of pH reduction, sulfate production, and metals removal, the order of bioleaching efficiency at different temperatures was 34 degrees C > 28 degrees C approximately to 40 degrees C > 22 degrees C. The preferable temperature used for the future larger-scale bioleaching process is 28 degrees C. It was found that during the bioleaching process, temperature did not directly affect the metal removal process; the final level of metal removal achieved was highly correlated to sediment pH. When the pH decreased to 5.0, 3.5, and 2.5, the removal of Zn, Cu, and Cr began to increase sharply, respectively, and the maximum metal removal could be achieved when the pH decreased to below 2.0.

Oxidation of elemental sulfur, tetrathionate and ferrous iron by the psychrotolerant Acidithiobacillus strain SS3

Mesophilic iron and sulfur-oxidizing acidophiles are readily found in acid mine drainage sites and bioleaching operations, but relatively little is known about their activities at suboptimal temperatures and in cold environments. The purpose of this work was to characterize the oxidation of elemental sulfur (S(0)), tetrathionate (S4O6(2-)) and ferrous iron (Fe2+) by the psychrotolerant Acidithiobacillus strain SS3. The rates of elemental sulfur and tetrathionate oxidation had temperature optima of 20 degrees and 25 degrees C, respectively, determined using a temperature gradient incubator that involved narrow (1.1 degrees C) incremental increases from 5 degrees to 30 degrees C. Activation energies calculated from the Arrhenius plots were 61 and 89 kJ mol(-1) for tetrathionate and 110 kJ mol(-1) for S(0) oxidation. The oxidation of elemental sulfur produced sulfuric acid at 5 degrees C and decreased the pH to approximately 1. The low pH inhibited further oxidation of the substrate. In media with both S(0) and Fe2+, oxidation of elemental sulfur did not commence until all available ferrous iron was oxidized. These data on sequential oxidation of the two substrates are in keeping with upregulation and downregulation of several proteins previously noted in the literature. Ferric iron was reduced to Fe2+ in parallel with elemental sulfur oxidation, indicating the presence of a sulfur:ferric iron reductase system in this bacterium.