Recent advances in sample preparation techniques for effective bioanalytical methods

Development of a Versatile High-through-put Oligonucleotide LC-MS Method to Accelerate Drug Discovery

Liquid chromatography-mass spectrometry (LC-MS) is an effective tool for high-throughput quantification of oligonucleotides that is crucial for understanding their biological roles and developing diagnostic tests. This paper presents a high-throughput LC-MS/MS method that may be versatilely applied for a wide range of oligonucleotides, making it a valuable tool for rapid screening and discovery. The method is demonstrated using an in-house synthesized MALAT-1 Antisense oligonucleotide (ASO) as a test case. Biological samples were purified using a reversed liquid-liquid extraction process automated by a liquid handling workstation and analyzed with ion-pairing LC-MS/MS. The assay was evaluated for sensitivity (LLOQ = 2 nM), specificity, precision, accuracy, recovery, matrix effect, and stability in rat cerebrospinal fluid (CSF) and plasma. Besides some existing considerations such as column selection, ion-pairing reagent, and sample purification, our work focused on the following four subtopics: 1) selecting the appropriate Multiple Reaction Monitoring (MRM) transition to maximize sensitivity for trace-level ASO in biological samples; 2) utilizing a generic risk-free internal standard (tenofovir) to avoid crosstalk interference from the oligo internal standard commonly utilized in the LC-MS assay; 3) automating the sample preparation process to increase precision and throughput; and 4) comparing liquid-liquid extraction (LLE) and solid-phase extraction (SPE) as sample purification methods in oligo method development. The study quantified the concentration of MALAT-1 ASO in rat CSF and plasma after intrathecal injection and used the difference between the two matrices to evaluate the injection technique. The results provide a solid foundation for further internal oligonucleotide discovery and development.

Metabolomics studies in common multifactorial eye disorders: a review of biomarker discovery for age-related macular degeneration, glaucoma, diabetic retinopathy and myopia

Introduction

Multifactorial Eye disorders are a significant public health concern and have a huge impact on quality of life. The pathophysiological mechanisms underlying these eye disorders were not completely understood since functional and low-throughput biological tests were used. By identifying biomarkers linked to eye disorders, metabolomics enables early identification, tracking of the course of the disease, and personalized treatment.

Methods

The electronic databases of PubMed, Scopus, PsycINFO, and Web of Science were searched for research related to Age-Related macular degeneration (AMD), glaucoma, myopia, and diabetic retinopathy (DR). The search was conducted in August 2023. The number of cases and controls, the study's design, the analytical methods used, and the results of the metabolomics analysis were all extracted. Using the QUADOMICS tool, the quality of the studies included was evaluated, and metabolic pathways were examined for distinct metabolic profiles. We used MetaboAnalyst 5.0 to undertake pathway analysis of differential metabolites.

Results

Metabolomics studies included in this review consisted of 36 human studies (5 Age-related macular degeneration, 10 Glaucoma, 13 Diabetic retinopathy, and 8 Myopia). The most networked metabolites in AMD include glycine and adenosine monophosphate, while methionine, lysine, alanine, glyoxylic acid, and cysteine were identified in glaucoma. Furthermore, in myopia, glycerol, glutamic acid, pyruvic acid, glycine, cysteine, and oxoglutaric acid constituted significant metabolites, while glycerol, glutamic acid, lysine, citric acid, alanine, and serotonin are highly networked metabolites in cases of diabetic retinopathy. The common top metabolic pathways significantly enriched and associated with AMD, glaucoma, DR, and myopia were arginine and proline metabolism, methionine metabolism, glycine and serine metabolism, urea cycle metabolism, and purine metabolism.

Conclusion

This review recapitulates potential metabolic biomarkers, networks and pathways in AMD, glaucoma, DR, and myopia, providing new clues to elucidate disease mechanisms and therapeutic targets. The emergence of advanced metabolomics techniques has significantly enhanced the capability of metabolic profiling and provides novel perspectives on the metabolism and underlying pathogenesis of these multifactorial eye conditions. The advancement of metabolomics is anticipated to foster a deeper comprehension of disease etiology, facilitate the identification of novel therapeutic targets, and usher in an era of personalized medicine in eye research.

Development and validation of a rapid and simple HILIC-MS/MS method for the determination of biogenic amines in tuna fish

The production of biogenic amines (BAs), which are markers of both quality and safety in fish and fishery products, is influenced by the harvesting technique, handling, and other operations including those carried out on board the vessel. Scombroid dark-meat fish (e.g. tuna) are the fish species most frequently linked to histamine poisoning. The most commonly found BAs in fish are histamine, tyramine, putrescine, and cadaverine, which are produced when microbes decarboxylate the corresponding free amino acids. In this study, a rapid and cost-effective HILIC-MS/MS method was developed and validated for the determination of putrescine, cadaverine, histamine and tyramine in tuna samples. A simple sample preparation procedure was followed using the solvent mixture MeOH/H2O (50/50, v/v), 0.1 % acetic acid for protein precipitation and analyte extraction. Intra- and inter-day accuracy, expressed as %Recovery (%R), ranged from 88.0 % (Cad) to 102.7 % (Tyr) and from 85.0 % (Cad) to 99.8 % (Tyr), respectively. Intra- and inter-day precision, expressed as %Relative Standard Deviation (%RSD), ranged from 0.4 % (Tyr, Put) to 3.3 % (His) and from 0.7 % (Tyr) to 5.0 % (Cad), respectively. Limits of detection (LOD) and quantification (LOQ) varied from 0.0009 to 0.0940 mg/kg and from 0.0030 mg/kg to 0.3100 mg/kg, respectively, depending on the analyte. Regarding the potential toxic effects linked to biogenic amines in foods, samples examined in this study showed no risk. The proposed method is an important analytical tool for routine analysis of BAs in fish products.

Application of newly developed and validated LC-MS/MS method for pharmacokinetic study of adagrasib and pembrolizumab simultaneously in rat plasma

Non-small cell lung cancer (NSCLC) is a significant subtype of lung cancer, and poses a dangerous global threat. One of the current approaches of NSCLC treatment is a combination therapy of adagrasib and pembrolizumab. Accurate monitoring of these drug concentrations in biological fluids is critical for treatment efficacy. Since no method was reported for simultaneous estimation of these drugs, this study focuses on the development of a validated LC-MS/MS bioanalytical method for simultaneous quantification of Adagrasib and Pembrolizumab in rat plasma. The analytes were extracted from the biological matrix through liquid-liquid extraction techniques using acetonitrile as extraction solvent. The analytes were separated on a Waters X-bridge phenyl C18 column, with a mixture of acetonitrile: 0.1 % TFA in water (50: 50 v/v) as mobile phase at an isocratic flow rate of 1.0 mL/min with a runtime of about 5 min. Adagrasib (m/z 605.12 → 201.62), Pembrolizumab (m/z 146.32 → 85.15), and Sotorasib (m/z 561.59 → 218.92) were determined by recording the mass spectra through multiple reaction monitoring in positive mode. The method was validated according to USFDA guidelines. The results demonstrate satisfactory linearity with an r2 value of 0.9998 in the ranges of 40-800 and 10-200 ng/mL, accuracy with mean percentage recovery of 95.22-98.59 % and 96.98-98.57 %, precision indicated with %RSD ranged between 0.39-1.91 % and 0.85-9.03 % for Adagrasib and Pembrolizumab respectively, and other key parameters. The developed method can determine the pharmacokinetic parameters to indicate the efficacy and safety of the drugs, and also can quantify selected drugs simultaneously in biological samples.

An Update on Current Trend in Sample Preparation Automation in Bioanalysis: strategies, Challenges and Future Direction

Automation in sample preparation improves accuracy, productivity, and precision in bioanalysis. Moreover, it reduces resource consumption for repetitive procedures. Automated sample analysis allows uninterrupted handling of large volumes of biological samples originating from preclinical and clinical studies. Automation significantly helps in management of complex testing methods where generation of large volumes of data is required for process monitoring. Compared to traditional sample preparation processes, automated procedures reduce associated expenses and manual error, facilitate laboratory transfers, enhance data quality, and better protect the health of analysts. Automated sample preparation techniques based on robotics potentially increase the throughput of bioanalytical laboratories. Robotic liquid handler, an automated sample preparation system built on a robotic technique ensures optimal laboratory output while saving expensive solvents, manpower, and time. Nowadays, most of the traditional extraction processes are being automated using several formats of online techniques. This review covered most of the automated sample preparation techniques reported till date, which accelerated and simplified the sample preparation procedure for bioanalytical sample analysis. This article critically analyzed different developmental aspects of automated sample preparation techniques based on robotics as well as conventional sample preparation methods that are accelerated using automated technologies.

Microextraction techniques for occupational biological monitoring: Basic principles, current applications and future perspectives

The application of green microextraction techniques (METs) is constantly being developed in different areas including pharmaceutical, forensic, food and environmental analysis. However, they are less used in biological monitoring of workers in occupational settings. Developing valid extraction methods and analytical techniques for the determination of occupational indicators plays a critical role in the management of workers' exposure to chemicals in workplaces. Microextraction techniques have become increasingly important because they are inexpensive, robust and environmentally friendly. This study aimed to provide a comprehensive review and interpret the applications of METs and novel sorbents and liquids in biological monitoring. Future perspectives and occupational indicators that METs have not yet been developed for are also discussed.

Simultaneous Determination of 23 Pyrrolizidine and Tropane Alkaloids in Infusions from Dry Edible Flowers Using Optimized μSPEed® Microextraction Prior to Their Analysis by UHPLC-IT-MS/MS

A miniaturized solid-phase extraction of two tropane alkaloids (TAs) and twenty-one pyrrolizidine alkaloids (PAs) from infusions of dry edible flowers using optimized µSPEed® technique was developed. The optimization of the µSPEed® methodology involved testing different cartridges and comparing various volumes and numbers of loading cycles. The final conditions allowed for a rapid extraction, taking only 3.5 min. This was achieved using a C18-ODS cartridge, conditioning with 100 µL of methanol (two cycles), loading 100 µL of the infusion sample (seven cycles), and eluting the analytes with 100 µL of methanol (two cycles). Prior to their analysis by UHPLC-IT-MS/MS, the extracts were evaporated and reconstituted in 100 µL of water (0.2% formic acid)/methanol (0.2% ammonia) 95:5 (v/v), allowing for a preconcentration factor of seven times. The methodology was successfully validated obtaining recoveries ranging between 87 and 97%, RSD of less than 12%, and MQL between 0.09 and 0.2 µg/L. The validated methodology was applied to twenty samples of edible flower infusions to evaluate the safety of these products. Two infusion samples obtained from Acmella oleracea and Viola tricolor were contaminated with 0.16 and 0.2 µg/L of scopolamine (TA), respectively, while the infusion of Citrus aurantium was contaminated with intermedine and lycopsamine (PAs) below the MQL.

Drugs in Human Milk Part 1: Practical and Analytical Considerations in Measuring Drugs and Metabolites in Human Milk

Human milk is a remarkable biofluid that provides essential nutrients and immune protection to newborns. Breastfeeding women consuming medications could pass the drug through their milk to neonates. Drugs can be transferred to human milk by passive diffusion or active transport. The physicochemical properties of the drug largely impact the extent of drug transfer into human milk. A comprehensive understanding of the physiology of human milk formation, composition of milk, mechanisms of drug transfer, and factors influencing drug transfer into human milk is critical for appropriate selection and use of medications in lactating women. Quantification of drugs in the milk is essential for assessing the safety of pharmacotherapy during lactation. This can be achieved by developing specific, sensitive, and reproducible analytical methods using techniques such as liquid chromatography coupled with mass spectrometry. The present review briefly discusses the physiology of human milk formation, composition of human milk, mechanisms of drug transfer into human milk, and factors influencing transfer of drugs from blood to milk. We further expand upon and critically evaluate the existing analytical approaches/assays used for the quantification of drugs in human milk.

Improved Protein Removal Performance of PES Hollow-Fiber Ultrafiltration Membrane with Sponge-like Structure

The research used polyethersulfone (PES) as a membrane material, polyvinylpyrrolidone (PVP) k30 and polyethylene glycol 400 (PEG 400) as water-soluble additives, and dimethylacetamide (DMAc) as a solvent to prepare hollow-fiber ultrafiltration membranes through a nonsolvent-induced phase separation (NIPS) process. The hydrophilic nature of PVP-k30 and PEG caused them to accumulate on the membrane surface during phase separation. The morphology, chemical composition, surface charge, and pore size of the PES membranes were evaluated by SEM, FTIR, zeta potential, and dextran filtration experiments. The paper also investigated how different spinning solution compositions affected membrane morphology and performance. The separation efficiency of membranes with four different morphologies was tested in single-protein and double-protein mixed solutions. The protein separation effectiveness of the membrane was studied through molecular weight cutoff, zeta potential, and static protein adsorption tests. In addition, the operating pressure and pH value were adjusted to improve ultrafiltration process conditions. The PES membrane with an intact sponge-like structure showed the highest separation factor of 11, making it a prime candidate membrane for the separation of bovine serum albumin (BSA) and lysozyme (LYS). The membrane had a minimal static protein adsorption capacity of 48 mg/cm2 and had excellent anti-fouling properties. When pH = 4, the BSA retention rate was 93% and the LYS retention rate was 23%. Furthermore, it exhibited excellent stability over a pH range of 1-13, confirming its suitability for protein separation applications.

Recent Advances in the Detection of Food Toxins Using Mass Spectrometry

Edibles are the only source of nutrients and energy for humans. However, ingredients of edibles have undergone many physicochemical changes during preparation and storage. Aging, hydrolysis, oxidation, and rancidity are some of the major changes that not only change the native flavor, texture, and taste of food but also destroy the nutritive value and jeopardize public health. The major reasons for the production of harmful metabolites, chemicals, and toxins are poor processing, inappropriate storage, and microbial spoilage, which are lethal to consumers. In addition, the emergence of new pollutants has intensified the need for advanced and rapid food analysis techniques to detect such toxins. The issue with the detection of toxins in food samples is the nonvolatile nature and absence of detectable chromophores; hence, normal conventional techniques need additional derivatization. Mass spectrometry (MS) offers high sensitivity, selectivity, and capability to handle complex mixtures, making it an ideal analytical technique for the identification and quantification of food toxins. Recent technological advancements, such as high-resolution MS and tandem mass spectrometry (MS/MS), have significantly improved sensitivity, enabling the detection of food toxins at ultralow levels. Moreover, the emergence of ambient ionization techniques has facilitated rapid in situ analysis of samples with lower time and resources. Despite numerous advantages, the widespread adoption of MS in routine food safety monitoring faces certain challenges such as instrument cost, complexity, data analysis, and standardization of methods. Nevertheless, the continuous advancements in MS-technology and its integration with complementary techniques hold promising prospects for revolutionizing food safety monitoring. This review discusses the application of MS in detecting various food toxins including mycotoxins, marine biotoxins, and plant-derived toxins. It also explores the implementation of untargeted approaches, such as metabolomics and proteomics, for the discovery of novel and emerging food toxins, enhancing our understanding of potential hazards in the food supply chain.

Determination of cefuroxime in breast milk by LC-MS/MS using SALLME technique

The World Health Organization recommends that infants be exclusively breastfed for the first 6 months. Antibiotics are among the most commonly prescribed drugs for pregnant and lactating women. The vast majority of drugs pass into breast milk, which may create a risk for the infant. In cases where drug exposure may pose a risk, breastfeeding should be discontinued. Therefore, the mother's drug use should be decided by considering the most accurate and recent data. Cefuroxime is a second-generation cephalosporin antibiotic with a broad spectrum of activity against Gram-negative and -positive microorganisms. In this study, we aimed to develop the LC-MS/MS method using salt-assisted liquid-liquid micro-extraction (SALLME) for the determination of cefuroxime in breast milk. The method was validated according to the European Medicines Agency (EMA) guidelines. Cefuroxime and the internal standard cefixime were extracted from plasma by a SALLME technique. The results obtained from the entire validation study are at an acceptable level according to the EMA criteria. The calibration curve of cefuroxime was between 25 and 1000 ng/ml, with correlation coefficients of >0.99. The lower limit of quantitation was 25 ng/ml for cefuroxime. Furthermore, the developed method was applied for the determination of cefuroxime in real patient breast milk.

Monitoring and modelling the glutamine metabolic pathway: a review and future perspectives

BACKGROUND

Analysis of the glutamine metabolic pathway has taken a special place in metabolomics research in recent years, given its important role in cell biosynthesis and bioenergetics across several disorders, especially in cancer cell survival. The science of metabolomics addresses the intricate intracellular metabolic network by exploring and understanding how cells function and respond to external or internal perturbations to identify potential therapeutic targets. However, despite recent advances in metabolomics, monitoring the kinetics of a metabolic pathway in a living cell in situ, real-time and holistically remains a significant challenge.

AIM

This review paper explores the range of analytical approaches for monitoring metabolic pathways, as well as physicochemical modeling techniques, with a focus on glutamine metabolism. We discuss the advantages and disadvantages of each method and explore the potential of label-free Raman microspectroscopy, in conjunction with kinetic modeling, to enable real-time and in situ monitoring of the cellular kinetics of the glutamine metabolic pathway.

KEY SCIENTIFIC CONCEPTS

Given its important role in cell metabolism, the ability to monitor and model the glutamine metabolic pathways are highlighted. Novel, label free approaches have the potential to revolutionise metabolic biosensing, laying the foundation for a new paradigm in metabolomics research and addressing the challenges in monitoring metabolic pathways in living cells.

Lipidomics in food quality and authentication: A comprehensive review of novel trends and applications using chromatographic and spectroscopic techniques

Lipid analysis is an integral part of food authentication and quality control which provides consumers with the necessary information to make an informed decision about their lipid intake. Recent advancement in lipid analysis and lipidome scope represents great opportunities for food science. In this review we provide a comprehensive overview of available tools for extraction, analysis and interpretation of data related to dietary fats analyses. Different analytical platforms are discussed including GC, MS, NMR, IR and UV with emphasis on their merits and limitations alongside complementary tools such as chemometric models and lipid-targeted online databases. Applications presented here include quality control, authentication of organic and delicacy food, tracing dietary fat source and investigating the effect of heat/storage on lipids. A multitude of analytical methods with different sensitivity, affordability, reproducibility and ease of operation are now available to comprehensively analyze dietary fats. Application of these methods range from studies which favor the use of large data generating platforms such as MS-based methods, to routine quality control which demands easy to use affordable equipment as TLC and IR. Hence, this review provides a navigation tool for food scientists to help develop an optimal protocol for their future lipid analysis quest.

Lab-in-syringe automated protein precipitation and salting-out homogenous liquid-liquid extraction coupled online to UHPLC-MS/MS for the determination of beta-blockers in serum

A sample preparation method involving tandem implementation of protein precipitation and salting-out homogenous liquid-liquid extraction was developed for the determination of beta-blockers in serum. The entire procedure was automated using a computer-controlled syringe pump following the Lab-In-Syringe approach. It is based on the denaturation of serum proteins with acetonitrile followed by salt-induced phase separation upon which the proteins accumulate as a compact layer at the interphase of the solutions. The extract is then separated and diluted in-syringe before being submitted to online coupled UHPLC-MS/MS. A 1 mL glass syringe containing a small stir bar for solution mixing at up to 3000 rpm, was used to deal with sample volumes as small as 100 μL. A sample throughput of 7 h^-1 was achieved by performing the chromatographic run and sample preparation procedure in parallel. Linear working ranges were obtained for all analytes between 5 and 100 ng mL^-1, with LOD values ranging from 0.4 to 1.5 ng mL^-1. Accuracy values in the range of 88.2-106% and high precision of <11% RSD suggest applicability for routine analysis that can be further improved using deuterated standards.

Comparison of Reversed-Phase and Mixed-Mode SPE for Enrichment and Clean-Up of Surrogate Peptides in CysC Quantified by LC-MS/MS

Accurate quantification of low-abundance protein Cystatin-C (CysC) in serum by liquid chromatography tandem mass spectrometry (LC-MS/MS) method is very difficult. After sample processing and tryptic digestion, the matrix of CysC surrogate peptides is very complexity, and the concentrations of them are very low, so solid-phase extraction (SPE) must be used to make the surrogate peptides purification and enrichment. In this paper, we used C18 reversed-phase SPE (RP-SPE) and mixed-mode SPE as SPE cartridges. We quantitatively assessed and compared the CysC surrogate peptides recoveries and matrix effects by different SPE cartridges. The sequence of CysC surrogate peptide is ALDFAVGEYNK, and sequence-specific subions y6 (VGEYNK+, m/z 709.3) and y9 (DFAVGEYNK+, m/z 1042.4) were selected for quantification of CysC, because the two fragment ions showed the highest sensitivity. In neat solution, the highest recoveries were similarly for y9 and y6 when used RP-SPE and mixed-mode SPE. However, in serum matrix, the recoveries were significantly higher when used mixed-mode SPE than RP-SPE, which was caused by matrix effects. Results showed that both RP-SPE and mixed-mode SPE were resulted in ion enhancement for CysC surrogate peptides quantification by LC-MS/MS, but mixed-mode SPE reduced more matrix effects. So mixed-mode SPE was more suitable SPE type for purification and enrichment of CysC surrogate peptides.

Analysis of Stimulants in Sweat and Urine Using Disposable Pipette Extraction and Gas Chromatography Coupled to Mass Spectrometry in the Context of Doping Control

Urine is initially collected from athletes to screen for the presence of illicit drugs. Sweat is an alternative sample matrix that provides advantages over urine including reduced opportunity for sample adulteration, longer detection-time window and non-invasive collection. Sweat is suitable for analysis of the parent drug and metabolites. In this study, a method was developed and validated to determine the presence of 13 amphetamine- and cocaine-related substances and their metabolites in sweat and urine using disposable pipette extraction (DPX) by gas chromatography coupled to mass spectrometry. The DPX extraction was performed using 0.1 M HCl and dichloromethane:isopropanol:ammonium hydroxide (78:20:2, v/v/v) followed by derivatization with N-methyl-N-(trimethylsilyl) trifluoroacetamide at 90°C for 20 min. DPX extraction efficiencies ranged between 65.0% and 96.0% in urine and 68.0% and 101.0% in sweat. Method accuracy was from 90.0% to 104.0% in urine and from 89.0% to 105.0% in sweat. Intra-assay precision in urine and in sweat were <15.6% and <17.8%, respectively, and inter-assay precision ranged from 4.70% to 15.3% in urine and from 4.05% to 15.4% in sweat. Calibration curves presented a correlation coefficient -0.99 for all analytes in both matrices. The validated method was applied to urine and sweat samples collected from 40 professional athletes who knowingly took one or more of the target illicit drugs. Thirteen of 40 athletes were positive for at least one drug. All the drugs detected in the urine were also detected in sweat samples indicating that sweat is a viable matrix for screening or confirmatory drug testing.

Comprehensive review on patulin and Alternaria toxins in fruit and derived products

Mycotoxins are toxic secondary metabolites produced by certain fungi, which can contaminate various food commodities, including fruits and their derived products. Patulin and Alternaria toxins are among the most commonly encountered mycotoxins in fruit and their derived products. In this review, the sources, toxicity, and regulations related to these mycotoxins, as well as their detection and mitigation strategies are widely discussed. Patulin is a mycotoxin produced mainly by the fungal genera Penicillium, Aspergillus, and Byssochlamys. Alternaria toxins, produced by fungi in the Alternaria genus, are another common group of mycotoxins found in fruits and fruit products. The most prevalent Alternaria toxins are alternariol (AOH) and alternariol monomethyl ether (AME). These mycotoxins are of concern due to their potential negative effects on human health. Ingesting fruits contaminated with these mycotoxins can cause acute and chronic health problems. Detection of patulin and Alternaria toxins in fruit and their derived products can be challenging due to their low concentrations and the complexity of the food matrices. Common analytical methods, good agricultural practices, and contamination monitoring of these mycotoxins are important for safe consumption of fruits and derived products. And Future research will continue to explore new methods for detecting and managing these mycotoxins, with the ultimate goal of ensuring the safety and quality of fruits and derived product supply.

Mass Spectrometric Methods for Non-Targeted Screening of Metabolites: A Future Perspective for the Identification of Unknown Compounds in Plant Extracts

Phyto products are widely used in natural products, such as medicines, cosmetics or as so-called “superfoods”. However, the exact metabolite composition of these products is still unknown, due to the time-consuming process of metabolite identification. Non-target screening by LC-HRMS/MS could be a technique to overcome these problems with its capacity to identify compounds based on their retention time, accurate mass and fragmentation pattern. In particular, the use of computational tools, such as deconvolution algorithms, retention time prediction, in silico fragmentation and sophisticated search algorithms, for comparison of spectra similarity with mass spectral databases facilitate researchers to conduct a more exhaustive profiling of metabolic contents. This review aims to provide an overview of various techniques and tools for non-target screening of phyto samples using LC-HRMS/MS.

Thalidomide measurement in plasma and dried plasma spot by SPE combined with UHPLC-MS/MS for therapeutic drug monitoring

Aims: To validate an SPE-ultra-HPLC-MS/MS method for thalidomide (THD) measurement in dried plasma spot (DPS). Methods: Extraction included acetonitrile/water clean-up and online SPE. The LOD, LLOQ, linearity, precision, accuracy, recovery, matrix effect, process efficiency, carryover, stability, drug interference and dilution integrity were assessed. Results: The method was linear from 50 to 2000 ng/ml with a LOD of 20 ng/ml and LLOQ of 50 ng/ml. The coefficient of variation for precision was 0.4-7.9% for intra-assay and 1.3-8.9% for interassay and accuracy was 81.4-97.1%. Adequate matrix effect (100.6-107.0%), recovery (88.7-105.0%) and process efficiency (91.3-109.3%) were registered. DPS was stable for 14 days at room temperature and 45°C and for 4 months at -80°C. The method was applied to quantify THD in both wet plasma and DPS from patients with cutaneous lupus receiving THD treatment. The difference between THD wet plasma and DPS concentration was <15%. Conclusion: The method is suitable to quantify THD in DPS.

Homemade Pipette Tip Solid-Phase Extraction for the Simultaneous Determination of 40 Drugs of Abuse in Urine by Liquid Chromatography–Tandem Mass Spectrometry

Pipette tip solid-phase extraction facilitates the handling of low-volume samples and organic solvents in order to achieve more environmentally friendly pre-treatment sample techniques. The use of pipette tip extraction was examined for the quick and simple determination of a heterogeneous group of 40 drugs of abuse and some of their metabolites in urine by liquid chromatography coupled to tandem mass spectrometry. Several parameters were studied and optimized, including those which can affect extraction efficiencies, such as the amount of sorbent and the volumes and number of aspirating/dispensing cycles of the sample and organic solvents. The linear range of this method was between the quantification limit and 75 or 100 ng mL−1. Detection limits between 0.025 and 0.500 ng mL−1 and quantification limits from 0.100 to 1.500 ng mL−1 were achieved, which are adequate to determine the studied compounds in urine from drug users. Finally, in order to prove its suitability in toxicological and forensic analyses, the method was successfully applied to 22 urine specimens from women who were starting a detoxification program. Cocaine was the most frequently detected substance, as its presence or the presence of its main metabolite was found in 86% of the analyzed samples.

The Isolation of Specialty Compounds from Amphidinium carterae Biomass by Two-Step Solid-Phase and Liquid-Liquid Extraction

The two main methods for partitioning crude methanolic extract from Amphidinium carterae biomass were compared. The objective was to obtain three enriched fractions containing amphidinols (APDs), carotenoids, and fatty acids. Since the most valuable bioproducts are APDs, their recovery was the principal goal. The first method consisted of a solid-phase extraction (SPE) in reverse phase that, for the first time, was optimized to fractionate organic methanolic extracts from Amphidinium carterae biomass using reverse-phase C18 as the adsorbent. The second method consisted of a two-step liquid-liquid extraction coupled with SPE and, alternatively, with solvent partitioning. The SPE method allowed the recovery of the biologically-active fraction (containing the APDs) by eluting with methanol (MeOH): water (H₂O) (80:20 v/v). Alternatively, an APD purification strategy using solvent partitioning proved to be a better approach for providing APDs in a clear-cut way. When using n-butanol, APDs were obtained at a 70% concentration (w/w), whereas for the SPE method, the most concentrated fraction was only 18% (w/w). For the other fractions (carotenoids and fatty acids), a two-step liquid-liquid extraction (LLE) method coupled with the solvent partitioning method presented the best results.

Designing an "all-in-one" microextraction capsule device for the liquid chromatographic-fluorescence determination of doxorubicin and its metabolites in rat plasma

In this study, an "all-in-one" microextraction device was designed and fabricated for the extraction of doxorubicin and its two metabolites from rat plasma prior to their determination by high performance liquid chromatography coupled to fluorescence detector. A sol-gel-based sorbent was synthesized in situ and incorporated within two conjoined porous polypropylene tubes together with a cylindrical magnetic bar in order to avoid the need of an external stirring bar. Among other sorbents investigated, the moderately polar sol-gel poly(tetrahydrofuran) was found to be advantageous due to its high affinity toward the target analytes. Systematic investigation of the critical parameters affecting the adsorption and the desorption step was carried out. Due to the "built-in" filtration mechanism of the porous microextraction capsules, the isolation of the analytes was performed directly in the plasma matrix without any previous sample pretreatment (i.e., protein precipitation, centrifugation, etc.). The proposed method was validated in terms of linearity, accuracy, precision, specificity, sensitivity, and stability according to the FDA guidelines. The limits of detection ranged between 1 - 2 ng mL^-1 while the lower limits of quantitation of the analytes were calculated as 10 ng mL^-1. The accuracy (% relative error) was found within -9.7 - 15.3% under both intra- and inter-day conditions. The precision was better than 13.4% in all cases. ComplexGAPI index was employed to present the green attributes of the developed protocol from the preparation of the microextraction device to the final determination of the analytes. Finally, the applicability of the fabricated stand-alone extraction device was demonstrated in the analysis of the target analytes in rat plasma after intravenous administration of doxorubicin in order to assess its pharmacokinetic profile.

Tracking the environmental fate of fipronil and three of its metabolites in garlic based on sampling rate-corrected in vivo solid phase microextraction combined with gas chromatography-mass spectrometry

In this study, a sampling rate-corrected in vivo solid-phase microextraction-gas chromatography-mass spectrometry method (SR-in vivo SPME-GC-MS) was constructed to simultaneously detect fipronil and three of its metabolites in garlic, and their environmental behavior was long-term monitored in in vivo mode. All of three fipronil metabolites were more difficult to degrade than the parent pesticide. The final degradation rates of the metabolites in garlic were in the range of 4.4%-25.1%, much lower than that of the parent (78.6%-85.8%). While their total residues amount was about 3 times as high as fipronil, exceeding the maximum residue limits regulated by China and the European Union. The steady-state concentrations of fipronil and its metabolites in garlic were positively correlated with the pesticide stress dose. In short, the established in vivo tracking method is efficient and convenient. The features of simple operation, fast analysis, acceptable sensitivity, non-harmful or non-lethal to plants, available repeated and long-term monitoring of the same organism make it attractive for in vivo tracking assay, it is of great significance for the guidance of rational use of fipronil and protection of food safety.

The promise of graphene-based transistors for democratizing multiomics studies

As biological research has synthesized genomics, proteomics, metabolomics, and transcriptomics into systems biology, a new multiomics approach to biological research has emerged. Today, multiomics studies are challenging and expensive. An experimental platform that could unify the multiple omics approaches to measurement could increase access to multiomics data by enabling more individual labs to successfully attempt multiomics studies. Field effect biosensing based on graphene transistors have gained significant attention as a potential unifying technology for such multiomics studies. This review article highlights the outstanding performance characteristics that makes graphene field effect transistor an attractive sensing platform for a wide variety of analytes important to system biology. In addition to many studies demonstrating the biosensing capabilities of graphene field effect transistors, they are uniquely suited to address the challenges of multiomics studies by providing an integrative multiplex platform for large scale manufacturing using the well-established processes of semiconductor industry. Furthermore, the resulting digital data is readily analyzable by machine learning to derive actionable biological insight to address the challenge of data compatibility for multiomics studies. A critical stage of systems biology will be democratizing multiomics study, and the graphene field effect transistor is uniquely positioned to serve as an accessible multiomics platform.

Defining Acute Coronary Syndrome through Metabolomics

As an emerging platform technology, metabolomics offers new insights into the pathomechanisms associated with complex disease conditions, including cardiovascular diseases. It also facilitates assessing the risk of developing the disease before its clinical manifestation. For this reason, metabolomics is of growing interest for understanding the pathogenesis of acute coronary syndromes (ACS), finding new biomarkers of ACS, and its associated risk management. Metabolomics-based studies in ACS have already demonstrated immense potential for biomarker discovery and mechanistic insights by identifying metabolomic signatures (e.g., branched-chain amino acids, acylcarnitines, lysophosphatidylcholines) associated with disease progression. Herein, we discuss the various metabolomics approaches and the challenges involved in metabolic profiling, focusing on ACS. Special attention has been paid to the clinical studies of metabolomics and lipidomics in ACS, with an emphasis on ischemia/reperfusion injury.

Determination of 13-cis-Retinoic Acid and Its Metabolites in Plasma by Micellar Electrokinetic Chromatography Using Cyclodextrin-Assisted Sweeping for Sample Preconcentration

The online preconcentration technique, cyclodextrin-assisted sweeping (CD-sweeping), coupled with micellar electrokinetic chromatography (MEKC) was established to determine 13-cis-retinoic acid (13-cis-RA), all-trans-retinoic acid (all-trans-RA) and 4-oxo-13-cis-retinoic acid (4-oxo-13-cis-RA) in human plasma. A CD-sweeping buffer (45 mM borate (pH 9.2), containing 80 mM sodium dodecyl sulfate (SDS) and 22 mM hydroxypropyl β-CD (HP-β-CD) was introduced into the capillary and, then, the sample dissolved in 70 mM borate (pH 9.2): methanol = 9:1 (v/v) was injected into capillary by pressure. The separation voltage was 23 kV. Compared to the conventional cyclodextrin-micellar electrokinetic chromatography (CD-MEKC) method, the new technique achieved 224-257-fold sensitivity enrichment of analytes. The limits of detection of 13-cis-RA, all-trans-RA were 1 ng/mL, whereas that of 4-oxo-13-cis-RA was 25 ng/mL in plasma. The linear ranges of 13-cis-RA, all-trans-RA were between 15 and 1000 ng/mL, whereas that of 4-oxo-13-cis-RA was between 75 and 1500 ng/mL. The coefficient of correlation between the concentration of analytes and peak area ratio of analytes and internal standard (2, 4-dihydroxy-benzophenone) for intra-day (n = 3) and inter-day (n = 5) analyses were both greater than 0.999. The optimized experimental conditions were successfully applied to determine 13-cis-retinoic acid and its metabolites in plasma samples from a patient during the administration of 13-cis-RA for treating acne.

In situ photo-initiated polymerized oligonucleotide-functionalized hydrophilic capillary affinity monolith for highly selective in-tube microextraction of ochratoxin A mycotoxin

A photo-initiated polymerized oligonucleotide-grafted hydrophilic affinity monolithic column was synthesized in situ, and exploited for selective in-tube solid phase micro-extraction (IT-SPME) protocol towards the sensitive detection of ochratoxin A (OTA). Only 7 min was required for the rapid polymerization of aptamer-based affinity monolith, which was much less than the reaction time of most thermal polymerization (12-16 h) and sol-gel chemistry methods (up to 52 h). Characterizations such as polymerization recipes, structure morphology, FTIR spectrum, elemental mapping, mechanical stability, and specific recognition performance were evaluated. A significantly hydrophilic nature with a low contact angle of 15° was observed, and a mixed-mode mechanism including aptamer affinity recognition and hydrophilic interaction (HI) was employed. By coupling with HPLC-fluorescence detection, the highly specific online recognition performance was achieved with an extremely low nonspecific adsorption of the analogues. The calibration curve of OTA was obtained in the concentration range 0.05-50.00 ng·mL^-1 with a limit of detection (LOD, S/N = 3) of 0.012 ng·mL^-1. Applied to sample analysis, acceptable recovery yields of 95.1 ± 1.4% - 99.5 ± 2.2% (n = 3) were obtained in beer and red wine. The proposed method lighted a promising way to efficiently preparing a hydrophilic aptamer-affinity monolith for highly specific recognition of trace mycotoxin by IT-SPME coupled with HPLC. A hydrophilic oligonucleotide-based affinity capillary monolith was explored via in situ photopolymerization for overcoming low preparation efficiency and achieving high-performance online IT-SPME of OTA mycotoxin.

Investigation of Self-Emulsifying Drug-Delivery System Interaction with a Biomimetic Membrane under Conditions Relevant to the Small Intestine

Self-emulsifying drug-delivery systems (SEDDS) have been extensively shown to increase oral absorption of solvation-limited compounds. However, there has been little clinical and commercial use of these formulations, in large part because the demonstrated advantages of SEDDS have been outweighed by our inability to precisely predict drug absorption from SEDDS using current in vitro assays. To overcome this limitation and increase the biological relevancy of in vitro assays, an absorption function can be incorporated using biomimetic membranes. However, the effects that SEDDS have on the integrity of a biomimetic membrane are not known. In this study, a quartz crystal microbalance with dissipation monitoring and total internal reflection fluorescence microscopy were employed as complementary methods to in vitro lipolysis-permeation assays to characterize the interaction of various actively digested SEDDS with a liquescent artificial membrane comprising lecithin in dodecane (LiDo). Observations from surface analysis showed that interactions between the digesting SEDDS and LiDo membrane coincided with inflection points in the digestion profiles. Importantly, no indications of membrane damage could be observed, which was supported by flux profiles of the lipophilic model drug felodipine (FEL) and impermeable marker Lucifer yellow on the basal side of the membrane. There was a correlation between the digestion kinetics of the SEDDS and the flux of FEL, but no clear correlation between solubilization and absorption profiles. Membrane interactions were dependent on the composition of lipids within each SEDDS, with the more digestible lipids leading to more pronounced interactions, but in all cases, the integrity of the membrane was maintained. These insights demonstrate that LiDo membranes are compatible with in vitro lipolysis assays for improving predictions of drug absorption from lipid-based formulations.

Bioanalytical strategies in drug discovery and development

A reliable, rapid, and effective bioanalytical method is essential for the determination of the pharmacokinetic, pharmacodynamic, and toxicokinetic parameters that inform the safety and efficacy profile of investigational drugs. The overall goal of bioanalytical method development is to elucidate the procedure and operating conditions under which a method can sufficiently extract, qualify, and/or quantify the analyte(s) of interest and/or their metabolites for the intended purpose. Given the difference in the physicochemical properties of small and large molecule drugs, different strategies need to be adopted for the development of an effective and efficient bioanalytical method. Herein, we provide an overview of different sample preparation strategies, analytical platforms, as well as procedures for achieving high throughput for bioanalysis of small and large molecule drugs.

Recent developments in sample preparation techniques combined with high-performance liquid chromatography: A critical review

This review article compares and contrasts sample preparation techniques coupled with high-performance liquid chromatography (HPLC) and describes applications developed in biomedical, forensics, and environmental/industrial hygiene in the last two decades. The proper sample preparation technique can offer valued data for a targeted application when coupled to HPLC and a suitable detector. Improvements in sample preparation techniques in the last two decades have resulted in efficient extraction, cleanup, and preconcentration in a single step, thus providing a pathway to tackle complex matrix applications. Applications such as biological therapeutics, proteomics, lipidomics, metabolomics, environmental/industrial hygiene, forensics, glycan cleanup, etc., have been significantly enhanced due to improved sample preparation techniques. This review looks at the early sample preparation techniques. Further, it describes eight sample preparation technique coupled to HPLC that has gained prominence in the last two decades. They are (1) solid-phase extraction (SPE), (2) liquid-liquid extraction (LLE), (3) gel permeation chromatography (GPC), (4) Quick Easy Cheap Effective Rugged, Safe (QuEChERS), (5) solid-phase microextraction (SPME), (6) ultrasonic-assisted solvent extraction (UASE), and (7) microwave-assisted solvent extraction (MWASE). SPE, LLE, GPC, QuEChERS, and SPME can be used offline and online with HPLC. UASE and MWASE can be used offline with HPLC but have also been combined with the online automated techniques of SPE, LLE, GPC, or QuEChERS for targeted analysis. Three application areas of biomedical, forensics, and environmental/industrial hygiene are reviewed for the eight sample preparation techniques. Three hundred and twenty references on the eight sample preparation techniques published over the last two decades (2001-2021) are provided. Other older references were included to illustrate the historical development of sample preparation techniques.

Recent advances in the extraction of triazine herbicides from water samples

Pesticides are excessively used in agriculture to improve the quality of crops by eliminating the negative effects of pests. Among the different groups of pesticides, triazine pesticides are a group of compounds that contain a substituted C₃ H₃ N₃ heterocyclic ring, and they are widely used. Triazine pesticides can be dangerous for humans as well as for the aquatic environment because of their high toxicity and endocrine disrupting effect. However, the concentration of these chemical compounds in water samples is low. Moreover, other compounds that may exist in the water samples can interfere with the determination of triazine pesticides. As a result, it is important to develop sample preparation methods that provide preconcentration of the target analyte and sufficient clean-up of the samples. Recently, a wide variety of novel microextraction and miniaturized extraction techniques (e.g., solid-phase microextraction and liquid-phase microextraction, stir bar sorptive extraction, fabric phase sorptive extraction, dispersive solid-phase extraction, and magnetic solid-phase extraction) have been developed. In this review, we aim to discuss the recent advances regarding the extraction of triazine pesticides from environmental water samples. Emphasis will be given to novel sample preparation methods and novel sorbents developed for sorbent-based extraction techniques.

Pharmacokinetics and Pharmacodynamic Herb-Drug Interaction of Piperine with Atorvastatin in Rats

Herbals that are widely consumed as therapeutic alternatives to conventional drugs for cardiovascular diseases, may lead to herb-drug interactions (HDIs). Atorvastatin (ATR) is drug of choice for hyperlipidemia and is extensively metabolized through CYP3A4 enzyme. Thus, we postulate that concomitant administration of ATR with piperine (PIP, potent inhibitor of CYP3A4 enzyme)/ridayarishta (RID, cardiotonic herbal formulations containing PIP) may lead to potential HDI. A simple, accurate, sensitive high-performance liquid chromatography-photodiode array detection method using Kromasil-100 C18 column, mobile phase acetonitrile: 30 mM phosphate buffer (55:45 v/v) pH 4.5 with flow rate gradient programming was developed to study the potential HDI in rats. Method was found to be linear (2-100 ng/mL) with Lower Limit of Detection (LLOD) 2 ng/mL. The precision (%CV < 15%), accuracy (-1.0 to -10% R.E) with recoveries above 90% from rat plasma of ATR and IS were obtained. The pharmacokinetic (PK) interactions studies on co-administration of ATR (8.4 mg/kg, p.o.) with PIP (35 mg/kg, p.o.), demonstrated a threefold increase in Cmax of ATR (P < 0.01) with significant increase in AUC0-t/AUC0-∞ compared to ATR alone indicating potential PK-HDI. However co-administration of RID (4.2 mL/kg, p.o.) showed less significant changes (P > 0.05) indicating low HDI. The pharmacodynamic effects/interactions study (TritonX-100 induced hyperlipidemic model in rats) suggested no significant alterations in the lipid profile on co-administration of PIP/RID with ATR, indicating that there may be no significant pharmacodynamic interactions.

Polypyrrole monolithic extraction phase: From conventional to miniaturized sample preparation techniques

Monolithic polymers are described as continuous and highly porous materials. They have been gaining popularity as an effective extracting phase for some sample preparation methods, due to their variety of functionalities, such as wide pH range tolerance, good permeability, and its ability to allow changes into their surface. Polypyrrole represents an interesting alternative for the modification in extraction phases due to its well related ability to perform multiple interactions, such as acid-base, π - π, ion exchange, interactions with hydrophobic affinities or polar functional groups. Among the different sample preparation techniques, solid-phase extraction (SPE) is one of the most popular and used; a miniaturized version of SPE is the disposable pipette extraction (DPX). DPX is a recent miniaturized extraction technique that usually employing silica-based sorbents inside a pipette tip (5 or 1 mL). The present study proposes the development of a monolithic extraction phase composed by styrene divinylbenzene (1:1) modified with polypyrrole for SPE and DPX techniques. The efficiency of the material was evaluated in face of the extraction of different samples and analytes, triazine herbicides in water and dexamethasone in synthetic synovial liquid by conventional and miniaturized solid-phase extraction techniques. The extractions performed by SPE and DPX presented absolute recovery values ranging from 74.8 to 105.0%, inter-day precision ranging from 0.6 to 14.0%, and limit of quantification of 0.5 and 5.0 ng.mL^-1, respectively. The DPX miniaturized method exhibited results equivalent to the methods reported in the literature for extraction of dexamethasone in synovial fluid samples. Moreover, this technique proved to be quicker and cheaper than SPE, and produced fewer residual volumes, supporting the preference for green chemistry. Monolithic polymers modified with polypyrrole presented to be a feasible alternative extraction phase for miniaturized sample preparation techniques.

The relevance of supersaturation and solubilization in the gastrointestinal tract for oral bioavailability: An in vitro vs. in vivo approach

The influence of supersaturation and solubilization on oral absorption was assessed independently from the dissolution process for the non-formulated model drugs celecoxib and telmisartan. In vitro, physicochemical characterization and biphasic dissolution were used to characterize the supersaturation and solubilization effects of three water soluble polymers (copovidone, methylcellulose and Soluplus®) on the drugs. While celecoxib precipitated in a crystalline form resulting in pronounced stabilization of supersaturation, telmisartan precipitated as a highly energetic amorphous form and the potential of the polymers to enhance its solubility was subsequently, limited. In vivo, for the crystalline precipitating celecoxib, supersaturation and solubilization increased its oral bioavailability up to 10-fold. On the contrary, the amorphous precipitating telmisartan did not benefit from the limited stabilization in terms of oral exposure. Amongst all investigated in vitro tests the biphasic dissolution test was the most predictive in relation to supersaturation. However, for the potential micellar solubilization and the respective impact in the aqueous/organic interface, prediction accuracy of the biphasic dissolution test was limited in combination with Soluplus®. Despite the hetergeneous micellar distribution in vitro and permeation in vivo, the biphasic approach could clearly show the supersaturation potential on bioavailability (BA) for celecoxib on the one hand and the inferiority of supersaturation on BA for telmisartan.

Application of molecularly imprinted polymers for the separation and detection of aflatoxin

Aflatoxins are extremely harmful carcinogens to humans and animals. In recent years, attention has been directed toward the application of molecular imprinting polymers for the separation and detection of aflatoxin. In this review, polymerization methods for the preparation of molecular imprinting polymers for aflatoxin detection, such as lump-bulk polymerization, spherical molecular imprinting polymer synthesis, surface-imprinted polymerization, and electropolymerization, are described. The applications of molecular imprinting polymers in solid-phase extraction, biosensors, and the surface-enhanced Raman detection of aflatoxin are also reviewed in this paper.

A new liquid phase microextraction method-based reverse micelle for analysis of dexketoprofen in human plasma by HPLC-DAD

A new liquid phase microextraction method was developed by used reverse micelle-based coacervates as microextraction agents for the separation of dexketoprofen (DKT) from human plasma before its determination by high-performance liquid chromatography with photodiode-array detection (HPLC-DAD). The change in the concentration of dexketoprofen in the plasma of the male and female patients was successfully monitored by using this method. The proposed method involves the use of reverse micelles of decanoic acid (DA) are dispersed in tetrahydrofuran (THF) and aqueous system. After addition of the DA and THF to the aqueous sample phase, the formation of micelles of nano and molecular size was observed in an ultrasonic bath. The solution was centrifuged, and the DKT extracted into the DA phase was analyzed by HPLC-DAD. Some analytical parameters that important in the developed procedure were examined in detail. The limit of detection (LOD), the limit of quantification (LOQ), the intraday, and inter day relative standard deviation (RSD, %) of the developed method in the plasma sample were found to be 12.8 ng mL−1, 38.8 ng mL−1, 1.7 and 3.9%, respectively. Additional/recovery studies were performed in plasma samples with proposed method, and quantitative recoveries were obtained in the range of 97–100%. The developed microextraction method was applied to human plasma that taken from volunteer patients for the determination of DKT.

Graphical abstract

Determination of the alcohol biomarker phosphatidylethanol 16:0/18:1 and 33 compounds from eight different drug classes in whole blood by LC-MS/MS

INTRODUCTION

Most bioanalytical LC-MS/MS methods are developed for determination of single drugs or classes of drugs, but a multi-compound LC-MS/MS method that can replace several methods could reduce both analysis time and costs. The aim of this study was to develop a high-throughput LC-MS/MS method for determination of the alcohol biomarker phosphatidylethanol 16:0/18:1 (PEth 16:0/18:1) and 33 other compounds from eight different drug classes in whole blood.

METHODS

Whole-blood samples were prepared by 96-well supported liquid extraction (SLE). Chromatographic separations were performed on a biphenyl core shell column with a mobile phase consisting of 10 mM ammonium formate, pH 3.1 and methanol. Each extract was analyzed twice by LC-MS/MS, injecting 0.4 μL and 2 μL, in order to obtain narrow and symmetrical peaks and good sensitivity for all compounds. Stable isotope-labeled internal standards were used for 31 of the 34 compounds.

RESULTS

A 96-well SLE reversed phase LC-MS/MS method for determination of PEth 16:0/18:1 and 33 other compounds from eight different drug classes was developed and validated. By using an organic solvent mixture of isopropanol/ methyl tert-butyl ether (1:5, v:v), all compounds, including the polar and ampholytic compounds pregabalin, gabapentin and benzoylecgonine, was extracted by 96-well SLE.

DISCUSSION/CONCLUSION

For the first time an LC-MS/MS method for the determination of alcohol biomarker PEth 16:0/18:1 and drugs and metabolites from several different drug classes was developed and validated. The developed LC-MS/MS method can be used for high-throughput analyses and sensitive determinations of the 34 compounds in whole blood.