Tissue response and in vivo degradation of selected polyhydroxyacids: polylactides (PLA), poly(3-hydroxybutyrate) (PHB), and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHB/VA)

Biodegradable PHBVHHx-PEG/Collagen Hydrogel Scaffolds for Cartilage Repair

Recently, there has been increased attention on the treatment of cartilage repair. Overall, we constructed PHBVHHx-COL, a composite hydrogel of PHBVHHx-co-PEG and collagen, and evaluated its cartilage repair efficacy through in vitro and in vivo studies using hydrogel loaded with peripheral blood-derived mesenchymal stem cells (PBMSCs). Rheological properties and compressive mechanical properties of the hydrogels were systematically evaluated. The cytocompatibility of the hydrogels was evaluated using the Cell Counting Kit-8 test, live/dead staining, scratch test, and transwell test. The effect of chondrogenic differentiation of PBMSCs on hydrogels was evaluated using immunofluorescence staining and reverse transcription-polymerase chain reaction. Furthermore, the in vivo cartilage repair ability of the hydrogels was confirmed following in situ injections in rabbit chondral defect models. Finally, the induced polarization of the hydrogel scaffold on macrophages was explored by the expression of CD86 and CD206. In vitro experimental results confirmed that PHBVHHx-COL-gel led to better cell migration, proliferation, and chondrogenic differentiation than PHBVHHx-PEG and COL hydrogels. Hematoxylin and eosin staining indicated that the tissue of the repaired area in the PHBVHHx-COL group was nearly in fusion with the surrounding normal tissue and the reconstruction of subchondral bone was good. Safranin-O staining and COL-2 immunohistochemistry indicated that the tissue of the repaired area in the PHBVHHx-COL group had more cartilage-specific matrix secretion. The PHBVHHx-COL group exhibited more M2 macrophage infiltration and less M1 macrophage presentation than the other groups. This study demonstrated that PHBVHHx-COL scaffolds loaded with PBMSCs significantly promoted the repair of cartilage injury through immune regulation by M2 polarization and could be potential candidates for cartilage tissue engineering.

Energy-Based Device Management of Nodular Reaction Following Poly-D, L-Lactic Acid Injection for Tear Trough Rejuvenation

BACKGROUND

Poly-D,L-lactic acid (PDLLA) is used for tear trough rejuvenation but can cause complications like nodular reactions. This report describes using a radiofrequency device to manage these nodules.

CASE PRESENTATION

A 42-year-old woman developed firm, non-inflammatory nodules 3 weeks after receiving PDLLA (Juvelook) injections in the tear trough area. The nodules were firm and not associated with erythema or tenderness.

INTERVENTION

The monopolar radiofrequency device was used directly on the nodules with 150 shots at an energy level 115 J, 28.75 J/cm². The treatment resulted in complete resolution of the nodules within 24 hours.

RESULTS

The radiofrequency treatment effectively resolved the nodular reaction without recurrence, highlighting the device's compatibility with the unique structure of Juvelook's PDLLA.

CONCLUSION

Radiofrequency therapy is effective for managing nodular reactions following PDLLA injections. Further research is needed to optimise protocols and improve the safety of biostimulator treatments in cosmetic procedures.

Polylactic Acid-Based Polymers Used for Facial Rejuvenation: A Narrative Review

For decades, a diverse range of natural and synthetic materials have been utilized to enhance human tissue and achieve improved aesthetic results. Among these, dermal fillers are some of the most popular treatments. Initially, the primary role of dermal fillers was to restore lost volume. However, with advancements in biomaterial research, a variety of biostimulatory fillers have become essential in aesthetic medicine. One such filler, polylactic acid (PLA), has been extensively used for facial rejuvenation. Upon injection, PLA not only provides immediate volume restoration but also enhances skin quality and appearance while promoting the regeneration of collagen, elastin, and vasculature. This narrative review highlights PLA as a regenerative aesthetic treatment, detailing its physicochemical properties, mechanisms of regeneration stimulation, and clinical applications in facial aesthetics. It represents the cutting-edge foundation upon which further developments can be built to ensure optimal and safe outcomes in treatments using PLA-based collagen stimulators and other similar products for facial rejuvenation. LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Comprehensive Systematic Review of Poly-L-lactic Acid in Facial Clinical Application

OBJECTIVES

With the increasing global clinical application of regenerative injection materials, there is a growing recognition of the crucial role played by poly-L-lactic acid (PLLA). The aim of this study is to conduct a systematic review on the therapeutic efficacy and safety of PLLA in clinical applications for facial treatments.

METHODS

We conducted a search of the PubMed, EMBASE, Web of Science, and Wanfang databases, followed by screening of the retrieved articles based on predefined inclusion and exclusion criteria. We then performed an analysis on the final set of included articles that met our inclusion criteria. Within these included articles, quality assessment for randomized controlled trials (RCTs) was carried out using the Jadad scale, while non-randomized controlled trials (non-RCTs) were evaluated using the MINORS scale.

RESULTS

Our search of above database, using the relevant search terms, yielded a total of 1300 PLLA-related articles. After applying the inclusion and exclusion criteria, 1280 articles were excluded. Only 20 articles, 16 in English and 4 in Chinese, were included in our final analysis, among them 16 NRCTs and 4 RCTs. According to the different clinical evaluation standards, the treatment of PLLA has achieved good outcomes. Most PLLA injection-related adverse events are mild and self-limited, without any additional treatment requirement.

CONCLUSION

PLLA is a reasonably safe and effective facial injection material that can be applied in different facial injection areas and depth using various reconstitute and injection methods.

LEVEL OF EVIDENCE I

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Enhancing the Potential of PHAs in Tissue Engineering Applications: A Review of Chemical Modification Methods

Polyhydroxyalkanoates (PHAs) are a family of polyesters produced by many microbial species. These naturally occurring polymers are widely used in tissue engineering because of their in vivo degradability and excellent biocompatibility. The best studied among them is poly(3-hydroxybutyrate) (PHB) and its copolymer with 3-hydroxyvaleric acid (PHBV). Despite their superior properties, PHB and PHBV suffer from high crystallinity, poor mechanical properties, a slow resorption rate, and inherent hydrophobicity. Not only are PHB and PHBV hydrophobic, but almost all members of the PHA family struggle because of this characteristic. One can overcome the limitations of microbial polyesters by modifying their bulk or surface chemical composition. Therefore, researchers have put much effort into developing methods for the chemical modification of PHAs. This paper explores a rarely addressed topic in review articles-chemical methods for modifying the structure of PHB and PHBV to enhance their suitability as biomaterials for tissue engineering applications. Different chemical strategies for improving the wettability and mechanical properties of PHA scaffolds are discussed in this review. The properties of PHAs that are important for their applications in tissue engineering are also discussed.

A Randomized, Evaluator-Blinded, Multicenter Study to Compare Injectable Poly-D,L-Lactic Acid vs Hyaluronic Acid for Nasolabial Fold Augmentation

BACKGROUND

Injectable poly-D,L-lactic acid (PDLLA), under the brand name of AestheFill (REGEN Biotech, Inc., Seoul, South Korea), is a biocompatible, biodegradable, and biostimulatory product utilized to correct soft tissue volume loss. Its efficacy and safety have not been fully studied in a large cohort.

OBJECTIVES

The aim of the study was to evaluate the efficacy and safety of a novel dermal filler injectable, poly-D,L-lactic acid.

METHODS

This was an evaluator-blinded, multicenter, randomized controlled trial to compare the efficacy and safety of PDLLA vs hyaluronic acid in the correction of the nasolabial fold. Two hundred and sixty patients with moderate to severe nasolabial folds were enrolled and randomized to the treatment group (PDLLA) or control group (hyaluronic acid). Each patient received a PDLLA or hyaluronic acid injection for nasolabial fold augmentation and was followed for 52 weeks. The Wrinkle Severity Rating Scale (WSRS) and Global Aesthetic Improvement Scale (GAIS) were applied to evaluate topical nasolabial fold augmentation and overall improvement, respectively.

RESULTS

At 24 weeks, 67.6% of patients in the PDLLA group had an at least 1-grade improvement on the WSRS, compared to 60.9% of patients in the control group with an at least 1-grade improvement on the WSRS (P < .05). At each visit, the PDLLA group showed more improvement on the baseline WSRS than the control group. PDLLA was safe and well tolerated, with no severe adverse events.

CONCLUSIONS

PDLLA shows noninferior efficacy in correcting nasolabial folds compared to hyaluronic acid.

LEVEL OF EVIDENCE: 2 (THERAPEUTIC)

The Effect of Acetic Acid as a Solvent on the Structure and Properties of Poly(3-hydroxybutyrate)-Based Dried Gels

Poly(3-hydroxybutyrate) (PHB) is a microbially derived polyhydroxyalkanoate that is widely used in biomedical applications. In this study, we investigated the use of acetic acid (aa) as an alternative environmentally friendly solvent for the preparation of gels from PHB (PHB aa) and compared their characteristics with PHB products dissolved in chloroform (PHB chl) using such methods as DSC, FTIR, SEM, rheometry, biodegradation, and cytocompatibility assay. A slight decrease in the degree of the crystallinity of the PHB from 61% to 50.8% was found when the acetic acid was used. This resulted in a greater mass loss for the PHB aa (11%) during enzymatic degradation over 180 days. Gels prepared from PHB in the different solvents showed differences in the microstructure and porosity of the samples, which affected their viscoelastic properties. The storage modulus (G') for the PHB aa gels was higher by 35% compared to that for the PHB chl, and Young's modulus in compression was 101.5 and 41.3 kPa for the PHB aa and PHB chl, respectively. The porosity of the PHB aa was 97.7%, which was 5.2% higher than that for the PHB chl. The presence of low molecular weight polymers in the PHB aa had an effect on mesenchymal stem cells' viability, expressed as a threefold increase in the number of attached cells after 7 days of incubation compared to the PHB chl. Thus, the proposed method of PHB-based materials' preparation is a promising, more environmentally friendly analog of the extensively used method of preparation from chloroform.

Piezo1 Activation Drives Enhanced Collagen Synthesis in Aged Animal Skin Induced by Poly L-Lactic Acid Fillers

Poly L-lactic acid (PLLA) fillers stimulate collagen synthesis by activating various immune cells and fibroblasts. Piezo1, an ion channel, responds to mechanical stimuli, including changes in extracellular matrix stiffness, by mediating Ca2+ influx. Given that elevated intracellular Ca2+ levels trigger signaling pathways associated with fibroblast proliferation, Piezo1 is a pivotal regulator of collagen synthesis and tissue fibrosis. The aim of the present study was to investigate the impact of PLLA on dermal collagen synthesis by activating Piezo1 in both an H2O2-induced cellular senescence model in vitro and aged animal skin in vivo. PLLA elevated intracellular Ca2+ levels in senescent fibroblasts, which was attenuated by the Piezo1 inhibitor GsMTx4. Furthermore, PLLA treatment increased the expression of phosphorylated ERK1/2 to total ERK1/2 (pERK1/2/ERK1/2) and phosphorylated AKT to total AKT (pAKT/AKT), indicating enhanced pathway activation. This was accompanied by upregulation of cell cycle-regulating proteins (CDK4 and cyclin D1), promoting the proliferation of senescent fibroblasts. Additionally, PLLA promoted the expression of phosphorylated mTOR/S6K1/4EBP1, TGF-β, and Collagen I/III in senescent fibroblasts, with GsMTx4 treatment mitigating these effects. In aged skin, PLLA treatment similarly upregulated the expression of pERK1/2/ERK1/2, pAKT/AKT, CDK4, cyclin D1, mTOR/S6K1/4EBP1, TGF-β, and Collagen I/III. In summary, our findings suggest Piezo1's involvement in PLLA-induced collagen synthesis, mediated by heightened activation of cell proliferation signaling pathways such as pERK1/2/ERK1/2, pAKT/AKT, and phosphorylated mTOR/S6K1/4EBP1, underscoring the therapeutic potential of PLLA in tissue regeneration.

The emerging role of biostimulators as an adjunct in facial rejuvenation: A systematic review

INTRODUCTION

Facial aging has long been an area of focus in esthetic surgery. It is the consequence of physiologic and environmental factors, with a trend toward non-surgical modalities. Although volume augmentation has long been a focus of non-surgical facial rejuvenation, there is emerging interest in the use of biostimulators to induce physiologic changes in the skin. This article aimed to provide an overview of this class of therapies.

METHODS

A systematic review regarding the clinical use of biostimulatory agents including platelet-rich plasma (PRP), platelet-rich fibrin (PRF), poly-L-lactic acid (PLLA) and calcium hydroxylapatite (CaHA) in facial rejuvenation was performed using PubMed databases. The protocol was developed following the preferred reporting for items for systematic reviews-protocols guidelines. Included studies matched predetermined criteria according to the employed intervention and outcomes.

RESULTS

The systematic review was performed in September 2023, with the primary search yielding 464 articles. Abstract review resulted in 73 articles of potential relevance. Comprehensive review of the articles and manual reference checks were performed, independently, by 2 authors. This yielded a total of 45 articles that met the inclusion criteria.

CONCLUSIONS

There is an increasing role for non-surgical modalities in facial rejuvenation. Biostimulatory agents may be used as an alternative, or act as an adjunct, to other non-surgical modalities. These agents induce physiologic changes that mitigate facial aging. There is limited, quantifiable data, which fully illustrate the effect in these products. Although these agents are known to illicit inflammatory changes, more controlled studies are needed to better elucidate the biostimulatory capacity of such non-surgical treatments.

Application of PLLA (Poly-L-Lactic acid) for rejuvenation and reproduction of facial cutaneous tissue in aesthetics: A review

Poly-L-lactin acid (PLLA) has been widely used in the field of bio-medicine. In 2004, as an injectable material, PLLA was approved by the FDA to treat AIDS-related facial atrophy. Since then, several injectable stuffs containing PLLA have been approved for marketing in various countries and regions. Recently, PLLA has often been used to treat facial rejuvenation problems like cutaneous depressions and static wrinkles which always induce unsatisfactory facial expression. This review introduces the physicochemical properties, regeneration stimulating mechanism, applications in aesthetics and injectable comorbidity of PLLA.

Needle-Free Jet Injection of Poly-(Lactic Acid) for Atrophic Acne Scars: Literature Review and Report of Clinical Cases

Acne scars, particularly atrophic ones, present a persistent challenge in cosmetic medicine and surgery, requiring extended and multifaceted treatment approaches. Poly-(lactic acid) injectable fillers show promise in managing atrophic acne scars by stimulating collagen synthesis. However, the utilization of needle-free injectors for delivering poly-(lactic acid) into scars remains an area requiring further exploration. In this article, a summary of the latest advancements in needle-free jet injectors is provided, specifically highlighting the variations in jet-producing mechanisms. This summary emphasizes the differences in how these mechanisms operate, offering insights into the evolving technology behind needle-free injection systems. The literature review revealed documented cases focusing on treating atrophic acne scars using intralesional poly-(lactic acid) injections. The results of these clinical studies could be supported by separate in vitro and animal studies, elucidating the feasible pathways through which this treatment operates. However, there is limited information on the use of needle-free jet injectors for the intradermal delivery of poly-(lactic acid). Clinical cases of atrophic acne scar treatment are presented to explore this novel treatment concept, the needle-free delivery of poly-(lactic acid) using a jet pressure-based injector. The treatment demonstrated efficacy with minimal adverse effects, suggesting its potential for scar treatment. The clinical efficacy was supported by histological evidence obtained from cadaver skin, demonstrating an even distribution of injected particles in all layers of the dermis. In conclusion, we suggest that novel needle-free injectors offer advantages in precision and reduce patient discomfort, contributing to scar improvement and skin rejuvenation. Further comprehensive studies are warranted to substantiate these findings and ascertain the efficacy of this approach in scar treatment on a larger scale.

Optimal Changes Seen in Patients After Treatment With Poly- l -Lactic Acid: A Retrospective Descriptive Study

BACKGROUND

Poly- l -lactic acid (PLLA) is a biostimulator that enhances collagen production and leads to volume restoration. It became popular because of its improvement of facial wrinkles and long-lasting effect, although the specific visible changes it causes in the facial area are not fully described.

OBJECTIVE

To identify and characterize the visible changes resulting from injecting PLLA into the facial area.

METHODS

A list of 678 patients who underwent 2 to 3 treatments with PLLA injections in this center between 2021 and 2022 were retrieved. After 2 rounds of evaluations, 31 independent international evaluators described the 3 main changes they observed in the before-and-after images (taken approximately 7 months after the last injection session) of the 12 patients with the most significant improvement.

RESULTS

A total of 1,015 descriptions were received. They were divided into categories based upon similarity. The main detected changes were better contouring and enhancement of the lateral face, a lifting effect and secondary impact on the nasolabial fold, and improvement of skin texture and skin firmness.

CONCLUSION

Poly- l -lactic acid injections were judged to be effective for contouring, lifting, and improving skin texture in the facial area. Further research is needed to validate these results and create an assessment scale for PLLA injections.

Biostimulating fillers and induction of inflammatory pathways: A preclinical investigation of macrophage response to calcium hydroxylapatite and poly-L lactic acid

INTRODUCTION

Initial macrophage response to biostimulatory substances is key in determining the subsequent behavior of fibroblasts and the organization of newly synthesized collagen. Though histological studies suggest that calcium hydroxylapatite (CaHA) filler initiates a regenerative healing response with collagen and elastin deposition similar to natural, healthy tissue rather than an inflammatory response with fibrosis, the relative activity of macrophages stimulated by CaHA, as well as how this activity compares to that induced by other biostimulatory fillers, has not been explored. The aim of the study is to characterize the in vitro macrophage response to two biostimulory fillers, CaHA and PLLA (poly-L lactic acid), and to evaluate their inflammatory potential.

METHODS

Primary human macrophages were incubated with two dilutions (1:50 and 1:100) of commercially available CaHA or PLLA. After 24 h incubation, an inflammation array was used to screen for the expression of 40 cytokines, released by macrophages. ELISA was used to confirm array results.

RESULTS

Four cytokines were significantly upregulated in M1 macrophages incubated with PLLA compared to both unstimulated controls and CaHA: CCL1 (p < 0.001), TNFRII (p < 0.01), MIP-1α (p < 0.05), and IL-8 (p < 0.001). In M2 macrophages, MIP-1α (p < 0.01) and MIP-1β (p < 0.01) were significantly upregulated by PLLA compared to CaHA and unstimulated controls.

CONCLUSION

Together, these findings indicate that the CaHA mode of action is a non-inflammatory response while PLLA initiates expression of several cytokines known to play a role in inflammation. Our study supports the concept that these two "biostimulatory" fillers follow distinct pathways and should be considered individually with regard to mechanism of action.

In Vitro and In Vivo Hydrolytic Degradation Behaviors of a Drug-Delivery System Based on the Blend of PEG and PLA Copolymers

This paper presents the in vitro and in vivo degradation of BEPO, a marketed in situ forming depot technology used for the formulation of long-acting injectables. BEPO is composed of a solution of a blend of poly(ethylene glycol)-block-poly(lactic acid) (PEG-PLA) triblock and diblock in an organic solvent, where a therapeutic agent may be dissolved or suspended. Upon contact with an aqueous environment, the solvent diffuses and the polymers precipitate, entrapping the drug and forming a reservoir. Two representative BEPO compositions were subjected to a 3-month degradation study in vitro by immersion in phosphate-buffered saline at 37 °C and in vivo after subcutaneous injection in minipig. The material erosion rate, as a surrogate of the bioresorption, determined via the depot weight loss, changed substantially, depending on the composition and content of polymers within the test item. The swelling properties and internal morphology of depots were shown to be highly dependent on the solvent exchange rate during the precipitation step. Thermal analyses displayed an increase of the depot glass transition temperature over the degradation process, with no crystallinity observed at any stage. The chemical composition of degraded depots was determined by 1H NMR and gel permeation chromatography and demonstrated an enrichment in homopolymers, i.e., free PLA and (m)PEG, to the detriment of (m)PEG-PLA copolymers in both formulations. It was observed that the relative ratio of the degradants within the depot is driven by the initial polymer composition. Interestingly, in vitro and in vivo results showed very good qualitative consistency. Taken together, the outcomes from this study demonstrate that the different hydrolytic degradation behaviors of the BEPO compositions can be tuned by adjusting the polymer composition of the formulation.

Novel barium-doped-baghdadite incorporated PHBV-PCL composite fibrous scaffolds for bone tissue engineering

Bioceramic/polymer composites have dragged a lot of attention for treating hard tissue damage in recent years. In this study, we synthesized barium-doped baghdadite (Ba-BAG), as a novel bioceramic, and later developed fibrous composite poly (hydroxybutyrate) co (hydroxyvalerate)- polycaprolactone (PHBV-PCL) scaffolds containing different amounts of baghdadite (BAG) and Ba-BAG, intended to be used in bone regeneration. Our results demonstrated that BAG and Ba-doped BAG powders were synthesized successfully using the sol-gel method and their microstructural, physicochemical, and cytotoxical properties results were evaluated. In the following, PHBV/PCL composite scaffolds containing different amounts of BAG and Ba-BAG (1, 3, and 5 wt%) were produced by the wet electrospinning method. The porosity of scaffolds decreased from 78% to 72% in Ba-BAG-incorporated PHBV/PCL scaffolds. The compressive strength of the scaffolds was between 4.69 and 9.28 kPa, which was increased to their maximum values in the scaffolds with Ba-BAG. The presence of BAG and Ba-BAG in the polymer scaffolds resulted in increasing bioactivity, and it was introduced as a suitable way to control the degradation rate of scaffolds. The presence of the BAG component was a major reason for higher cell proliferation in reinforced PHBV/PCL polymeric scaffolds, while Ba existence played its influential role in the higher osteogenic activity of cells on Ba-BAG incorporated PHBV/PCL scaffolds. Thus, the incorporation of Ba-BAG bioceramic materials into the structure of polymeric PHBV/PCL scaffolds promoted their various properties, and allow these scaffolds to be used as promising candidates in bone tissue engineering applications.

Needleless laser injector versus needle injection for skin enhancement and rejuvenation effect of dermal filler

BACKGROUND AND OBJECTIVES

A needleless laser-induced microjet injector is a novel transdermal drug delivery system that can rapidly inject a very small and precise drug dose into the skin with minimal pain and downtime. In this study, we aimed to compare the laser-induced microjet injection versus needle injection of polylactic acid/hyaluronic acid filler for skin enhancement and rejuvenation.

PATIENTS AND METHODS

A 24-week prospective, single-center, assessor-blinded, randomized, split-face study was conducted. The enrolled patients underwent one treatment session of dermal filler injection using a laser-induced microjet injector on one half of the face or a traditional needle injection on the other half of the face. Evaluation was conducted at baseline before treatment and at 4, 12, and 24 weeks after treatment.

RESULTS

A single treatment of filler injection with a laser-induced microjet injector resulted in similar improvements in skin hydration and elasticity as a single treatment of filler injection by using manual needle injection, with reduced pain, side effects, and decreased treatment time.

CONCLUSIONS

Laser-induced microjet injector enabled not only the application of a controlled dose and filler depth but also even distribution, improved clinical efficacy, reduced pain and side effects, and sufficient time for clinicians to perform treatment.

Biosynthetic Plastics as Tunable Elastic and Visible Stent with Shape-Memory to Treat Biliary Stricture

Common biliary tract is ≈4 mm in diameter to deliver bile from liver to small intestine to help digestion. The abnormal narrowing leads to severe symptoms such as pain and nausea. Stents are an effective treatment. Compared with non-degradable stents which require repeated removal, biodegradable stents have the advantage of reducing secondary injury related to endoscopic operation and patient burden. However, current biodegradable materials may cause tissue hyperplasia and the treatment method does not target etiology of stricture. So recurrence rates after biodegradable stent implantation are still high. Here, a biodegradable helical stent fabricated from biosynthetic P(3HB-co-4HB) is reported. Tunable properties can be acquired through altering culture substrates. Stent shows shape memory in various solvents. The stent has an optimized design with helical structure and outer track. The self-expanding of helical structure and double drainage realized by outer track greatly improve drainage of bile. Importantly, stent-loading triamcinolone acetonide can inhibit proliferation of fibroblasts and reduce incidence of restricture. Therapeutic effect is also demonstrated in minipigs with biliary stricture. The results of minipig experiments show that biliary duct in treatment group is unobstructed and tissue hyperplasia is effectively inhibited.

Bio-Resorption Control of Magnesium Alloy AZ31 Coated with High and Low Molecular Weight Polyethylene Oxide (PEO) Hydrogels

Magnesium AZ31 alloy has been chosen as bio-resorbable temporary prosthetic implants to investigate the degradation processes in a simulating body fluid (SBF) of the bare metal and the ones coated with low and high-molecular-weight PEO hydrogels. Hydrogel coatings are proposed to control the bioresorption rate of AZ31 alloy. The alloy was preliminary hydrothermally treated to form a magnesium hydroxide layer. 2 mm discs were used in bioresorption tests. Scanning electron microscopy was used to characterize the surface morphology of the hydrothermally treated and PEO-coated magnesium alloy surfaces. The variation of pH and the mass of Mg2+ ions present in the SBF corroding medium have been monitored for 15 days. Corrosion current densities (Icorr) and corrosion potentials (Ecorr) were evaluated from potentiodynamic polarisation tests on the samples exposed to the SBF solution. Kinetics of cumulative Mg ions mass released in the corroding solution have been evaluated regarding cations diffusion and mass transport parameters. The initial corrosion rates for the H- and L-Mw PEO-coated specimens were similar (0.95 ± 0.12 and 1.82 ± 0.52 mg/cm2day, respectively) and almost 4 to 5 times slower than that of the uncoated system (6.08 mg/cm2day). Results showed that the highly swollen PEO hydrogel coatings may extend into the bulk solution, protecting the coated metal and efficiently controlling the degradation rate of magnesium alloys. These findings focus more research effort on investigating such systems as tunable bioresorbable prosthetic materials providing idoneous environments to support cells and bone tissue repair.

Poly-D,L-Lactic Acid Stimulates Angiogenesis and Collagen Synthesis in Aged Animal Skin

Angiogenesis promotes rejuvenation in multiple organs, including the skin. Heat shock protein 90 (HSP90), hypoxia-inducible factor-1 alpha (HIF-1α), and vascular endothelial growth factor (VEGF) are proangiogenic factors that stimulate the activities of phosphoinositide 3-kinase (PI3K), protein kinase B (AKT), and extracellular signal-regulated kinase 1/2 (ERK1/2). Poly-D,L-lactic acid (PDLLA), polynucleotide (PN), and calcium hydroxyapatite (CaHA) are dermal fillers that stimulate the synthesis of dermal collagen. However, it is not yet known whether these compounds promote angiogenesis, which leads to skin rejuvenation. Here, we evaluated whether PDLLA, PN, and CaHA stimulate angiogenesis and skin rejuvenation using H₂O₂-treated senescent macrophages and endothelial cells as an in vitro model for skin aging, and we used young and aged C57BL/6 mice as an in vivo model. Angiogenesis was evaluated via endothelial cell migration length, proliferation, and tube formation after conditioned media (CM) from senescent macrophages was treated with PDLLA, PN, or CaHA. Western blot showed decreased expression levels of HSP90, HIF-1α, and VEGF in senescent macrophages, but higher expression levels of these factors were found after treatment with PDLLA, PN, or CaHA. In addition, after exposure to CM from senescent macrophages treated with PDLLA, PN, or CaHA, senescent endothelial cells expressed higher levels of VEGF receptor 2 (VEGFR2), PI3K, phosphorylated AKT (pAKT), and phosphorylated ERK1/2 (pERK1/2) and demonstrated greater capacities for cell migration, cell proliferation, and tube formation. Based on the levels of 4-hydroxy-2-nonenal, the oxidative stress level was lower in the skin of aged mice injected with PDLLA, PN, or CaHA, while the tumor growth factor (TGF)-β1, TGF-β2, and TGF-β3 expression levels; the density of collagen fibers; and the skin elasticity were higher in the skin of aged mice injected with PDLLA, PN, or CaHA. These effects were greater in PDLLA than in PN or CaHA. In conclusion, our results are consistent with the hypothesis that PDLLA stimulates angiogenesis, leading to the rejuvenation of aged skin. Our study is the first to show that PDLLA, PN, or CaHA can result in angiogenesis in the aged skin, possibly by increasing the levels of HSP90, HIF-1α, and VEGF and increasing collagen synthesis.

Influence of PHA Substrate Surface Characteristics on the Functional State of Endothelial Cells

The needs of modern regenerative medicine for biodegradable polymers are wide and varied. Restoration of the viability of the vascular tree is one of the most important components of the preservation of the usefulness of organs and tissues. The creation of vascular implants compatible with blood is an important task of vascular bioengineering. The function of the endothelial layer of the vessel, being largely responsible for the development of thrombotic complications, is of great importance for hemocompatibility. The development of surfaces with specific characteristics of biomaterials that are used in vascular technologies is one of the solutions for their correct endothelialization. Linear polyhydroxyalkanoates (PHAs) are biodegradable structural polymeric materials suitable for obtaining various types of implants and tissue engineering, having a wide range of structural and physicomechanical properties. The use of PHA of various monomeric compositions in endothelial cultivation makes it possible to evaluate the influence of material properties, especially surface characteristics, on the functional state of cells. It has been established that PHA samples with the inclusion of 3-hydroxyhexanoate have optimal characteristics for the formation of a human umbilical vein endothelial cell, HUVEC, monolayer in terms of cell morphology as well as the levels of expression of vinculin and VE-cadherin. The obtained results provide a rationale for the use of PHA copolymers as materials for direct contact with the endothelium in vascular implants.

Objective Assessment of the Long-Term Volumizing Action of a Polycaprolactone-Based Filler

Background

The polycaprolactone-based filler, (PCL-1, Ellansé-S), forms part of the recently growing portfolio of biodegradable collagen-stimulating fillers. It is comprised of a suspension of 25-50 micron diameter microspheres of polycaprolactone (PCL) (30%) in a carboxymethyl cellulose (CMC) gel carrier (70%) and has gained popularity due to its long-term volumizing action.

Objective

This study outlines a retrospective case series of nine patients injected with the PCL-1, for volume augmentation in the mid-face. Objective volume calculations were performed with the Canfield Vectra 3D Imaging System at two time points post-implantation, with the objective of determining the longevity of the volumizing effect of the bio-stimulating substance.

Results

A clear increase in volume, between 50-150%, was found in all of the patients at two years, over and above the volume initially injected. All the patients were satisfied with the longevity of the results.

Discussion

The PCL-based filler is believed to afford immediate volume restoration due to the CMC gel component and a long-term action due to neo-collagenesis, induced by the PCL microspheres. The CMC gel is known to dissipate within 6-8 weeks, only to be replaced by new collagen induced by the PCL particles. Thus soft-tissue formation induced by the PCL particles, ultimately leads to a sustained volumizing effect.

Conclusion

The PCL-based filler is shown to have a sustained volumizing effects of at least 2 years duration with clear evidence of increase in volume over and above the volume injected, in all of the cases studied. This is indicative of significant neo-collagenesis induced by the PCL microspheres.

Biomedical Applications of Polyhydroxyalkanoate in Tissue Engineering

Tissue engineering technology aids in the regeneration of new tissue to replace damaged or wounded tissue. Three-dimensional biodegradable and porous scaffolds are often utilized in this area to mimic the structure and function of the extracellular matrix. Scaffold material and design are significant areas of biomaterial research and the most favorable material for seeding of in vitro and in vivo cells. Polyhydroxyalkanoates (PHAs) are biopolyesters (thermoplastic) that are appropriate for this application due to their biodegradability, thermo-processability, enhanced biocompatibility, mechanical properties, non-toxicity, and environmental origin. Additionally, they offer enormous potential for modification through biological, chemical and physical alteration, including blending with various other materials. PHAs are produced by bacterial fermentation under nutrient-limiting circumstances and have been reported to offer new perspectives for devices in biological applications. The present review discusses PHAs in the applications of conventional medical devices, especially for soft tissue (sutures, wound dressings, cardiac patches and blood vessels) and hard tissue (bone and cartilage scaffolds) regeneration applications. The paper also addresses a recent advance highlighting the usage of PHAs in implantable devices, such as heart valves, stents, nerve guidance conduits and nanoparticles, including drug delivery. This review summarizes the in vivo and in vitro biodegradability of PHAs and conducts an overview of current scientific research and achievements in the development of PHAs in the biomedical sector. In the future, PHAs may replace synthetic plastics as the material of choice for medical researchers and practitioners.

Polyhydroxyalkanoates (PHAs) as Biomaterials in Tissue Engineering: Production, Isolation, Characterization

Polyhydroxyalkanoates (PHAs) are biodegradable and biocompatible biopolymers. These biomaterials have grown in importance in the fields of tissue engineering and tissue reconstruction for structural applications where tissue morphology is critical, such as bone, cartilage, blood vessels, and skin, among others. Furthermore, they can be used to accelerate the regeneration in combination with drugs, as drug delivery systems, thus reducing microbial infections. When cells are cultured under stress conditions, a wide variety of microorganisms produce them as a store of intracellular energy in the form of homo- and copolymers of [R]—hydroxyalkanoic acids, depending on the carbon source used for microorganism growth. This paper gives an overview of PHAs, their biosynthetic pathways, producing microorganisms, cultivation bioprocess, isolation, purification and characterization to obtain biomaterials with medical applications such as tissue engineering.

Biomaterials assisted reconstructive urology: The pursuit of an implantable bioengineered neo-urinary bladder

Urinary bladder is a dynamic organ performing complex physiological activities. Together with ureters and urethra, it forms the lower urinary tract that facilitates urine collection, low-pressure storage, and volitional voiding. However, pathological disorders are often liable to cause irreversible damage and compromise the normal functionality of the bladder, necessitating surgical intervention for a reconstructive procedure. Non-urinary autologous grafts, primarily derived from gastrointestinal tract, have long been the gold standard in clinics to augment or to replace the diseased bladder tissue. Unfortunately, such treatment strategy is commonly associated with several clinical complications. In absence of an optimal autologous therapy, a biomaterial based bioengineered platform is an attractive prospect revolutionizing the modern urology. Predictably, extensive investigative research has been carried out in pursuit of better urological biomaterials, that overcome the limitations of conventional gastrointestinal graft. Against the above backdrop, this review aims to provide a comprehensive and one-stop update on different biomaterial-based strategies that have been proposed and explored over the past 60 years to restore the dynamic function of the otherwise dysfunctional bladder tissue. Broadly, two unique perspectives of bladder tissue engineering and total alloplastic bladder replacement are critically discussed in terms of their status and progress. While the former is pivoted on scaffold mediated regenerative medicine; in contrast, the latter is directed towards the development of a biostable bladder prosthesis. Together, these routes share a common aspiration of designing and creating a functional equivalent of the bladder wall, albeit, using fundamentally different aspects of biocompatibility and clinical needs. Therefore, an attempt has been made to systematically analyze and summarize the evolution of various classes as well as generations of polymeric biomaterials in urology. Considerable emphasis has been laid on explaining the bioengineering methodologies, pre-clinical and clinical outcomes. Some of the unaddressed challenges, including vascularization, innervation, hollow 3D prototype fabrication and urinary encrustation, have been highlighted that currently delay the successful commercial translation. More importantly, the rapidly evolving and expanding concepts of bioelectronic medicine are discussed to inspire future research efforts towards the further advancement of the field. At the closure, crucial insights are provided to forge the biomaterial assisted reconstruction as a long-term therapeutic strategy in urological practice for patients' care.

Polyhydroxyalkanoates (PHAs) Production from Volatile Fatty Acids (VFAs) from Organic Wastes by Pseudomonas oleovorans

This study aimed to investigate the production of polyhydroxyalkanoates (PHAs), a biodegradable polymer from organic wastes by Pseudomonas oleovorans. Volatile fatty acids (VFAs) from acidogenic fermentations of chicken manure (VFAs-CM) and potato peels (VFAs-PP), rich in organic matter majorly acetic (49.9%), butyric (15%) and propionic acids (11.1%) were utilized as substrates for microbial processes. During 72 h of cultivations, samples were withdrawn at intervals and analyzed for cell growth parameters, PHAs accumulation and polymeric properties. The highest biopolymer accumulation (0.39 g PHAs/g DCW) was achieved at 48 h of cultivation from medium containing VFAs-PP as the sole source of carbon. On characterization, the produced biopolymers were shown to be semi-crystalline of carbonyl C=O group. Additionally, thermogravimetric analysis (TGA) showed that the produced biopolymers demonstrated the capability to withstand thermal degradation above prescribed temperatures at which cross-linking isomerization reaction occurs, which is a vital property denoting the thermal stability of biopolymer.

Comparative Metabolomics Reveals the Microenvironment of Common T-Helper Cells and Differential Immune Cells Linked to Unique Periapical Lesions

Periapical abscesses, radicular cysts, and periapical granulomas are the most frequently identified pathological lesions in the alveolar bone. While little is known about the initiation and progression of these conditions, the metabolic environment and the related immunological behaviors were examined for the first time to model the development of each pathological condition. Metabolites were extracted from each lesion and profiled using gas chromatography-mass spectrometry in comparison with healthy pulp tissue. The metabolites were clustered and linked to their related immune cell fractions. Clusters I and J in the periapical abscess upregulated the expression of MMP-9, IL-8, CYP4F3, and VEGF, while clusters L and M were related to lipophagy and apoptosis in radicular cyst, and cluster P in periapical granuloma, which contains L-(+)-lactic acid and ethylene glycol, was related to granuloma formation. Oleic acid, 17-octadecynoic acid, 1-nonadecene, and L-(+)-lactic acid were significantly the highest unique metabolites in healthy pulp tissue, periapical abscess, radicular cyst, and periapical granuloma, respectively. The correlated enriched metabolic pathways were identified, and the related active genes were predicted. Glutamatergic synapse (16-20),-hydroxyeicosatetraenoic acids, lipophagy, and retinoid X receptor coupled with vitamin D receptor were the most significantly enriched pathways in healthy control, abscess, cyst, and granuloma, respectively. Compared with the healthy control, significant upregulation in the gene expression of CYP4F3, VEGF, IL-8, TLR2 (P < 0.0001), and MMP-9 (P < 0.001) was found in the abscesses. While IL-12A was significantly upregulated in cysts (P < 0.01), IL-17A represents the highest significantly upregulated gene in granulomas (P < 0.0001). From the predicted active genes, CIBERSORT suggested the presence of natural killer cells, dendritic cells, pro-inflammatory M1 macrophages, and anti-inflammatory M2 macrophages in different proportions. In addition, the single nucleotide polymorphisms related to IL-10, IL-12A, and IL-17D genes were shown to be associated with periapical lesions and other oral lesions. Collectively, the unique metabolism and related immune response shape up an environment that initiates and maintains the existence and progression of these oral lesions, suggesting an important role in diagnosis and effective targeted therapy.

Metallic Nanoscaffolds as Osteogenic Promoters: Advances, Challenges and Scope

Bone injuries and fractures are often associated with post-surgical failures, extended healing times, infection, a lack of return to a normal active lifestyle, and corrosion associated allergies. In this regard, this review presents a comprehensive report on advances in nanotechnology driven solutions for bone tissue engineering. The fabrication of metals such as copper, gold, platinum, palladium, silver, strontium, titanium, zinc oxide, and magnetic nanoparticles with tunable physico-chemical and opto-electronic properties for osteogenic scaffolds is discussed here in detail. Furthermore, the rational selection of a polymeric base such as chitosan, collagen, poly (L-lactide), hydroxyl-propyl-methyl cellulose, poly-lactic-co-glycolic acid, polyglucose-sorbitol-carboxymethy ether, polycaprolactone, natural rubber latex, and silk fibroin for scaffold preparation is also discussed. These advanced materials and fabrication strategies not only provide for appropriate mechanical strength but also render integrity, making them appealing for orthopedic applications. Further, such scaffolds can be functionalized with ligands or biomolecules such as hydroxyapatite, polypyrrole (PPy), magnesium, zinc dopants, and growth factors to stimulate osteogenic differentiation, mineralization, and neovascularization to aid in rapid healing. Future directions to co-incorporate bioceramics, biogenic nanoparticles, and fourth generation biomaterials to enhance biocompatibility, mechanical properties, and rapid recovery are also included in this review. Hence, the further development of such biomimetic metal-based nano-scaffolds at a lower cost with reduced risks and greater efficacy at regrowing bone can revolutionize the future of orthopedics.

Comparative Evaluation of Safety and Efficacy of a Novel Hyaluronic Acid-polynucleotide/Poly-L-lactic Acid Composite Dermal Filler

BACKGROUND

Poly-L-lactic acid (PLLA) is widely used in tissue engineering. The natural polymer hyaluronic acid (HA) shows excellent biocompatibility and affects cell signaling, proliferation, and differentiation. In addition, a polynucleotide (PN) induces cell growth of human skin fibroblasts and osteoblasts.

OBJECTIVE

In this study, we evaluated the properties, safety, and efficacy of a novel composite filler consisting of cross-linked HA with PN in combination with monodisperse PLLA microspheres manufactured using Inventage Lab Precision Particle Fabrication method.

MATERIALS AND METHODS

The composition of the filler and characteristics of the microspheres were examined via scanning electron microscopy, particle size analysis, gel permeation chromatography, and rheology and osmolality measurement. Additionally, safety and efficacy of HA-PN/PLLA composite filler were conducted in in vitro and in vivo.

RESULTS

Analysis of PLLA microspheres revealed spherical surfaces and a narrower particle size distribution than that in PLLA filler. HA-PN/PLLA composite filler had higher viscosity and elasticity values and similar osmolality as compared to those of HA and PN fillers. The nontoxicity in in vitro and in vivo tests reflected that the composite filler may be safe for human use. In addition, the composite filler maintained a more stable volume than did HA filler for 24 weeks after administration in HWY/Slc hairless rats. Furthermore, the results support the effect of HA-PN/PLLA in restoring skin structure.

CONCLUSION

Altogether, these data suggest that the novel composite filler might be a safe and effective option in terms of tissue integration, clinical management during delivery and high esthetic durability.

LEVEL OF EVIDENCE III

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Collagen and the effect of poly-l-lactic acid based materials on its synthesis

Collagen is an important protein in various biological functions such as providing elasticity and waterproofing to the skin, structural stability to the cells in connective tissues (e.g. tendons, and bone) and stabilisation of atherosclerotic plaques. Collagen as a peptide with a peculiar triple helical structure is majorly composed of glycine and proline amino acids and is synthesised by fibroblasts via intracellular and extracellular mechanisms. Collagen plays an important role in wound healing, bone repair and plaque build-up during atherosclerosis. Various factors such as interleukins, insulin-like growth factor-I, nicotine, and glucose have been shown to influence collagen synthesis. This paper provides an overview of collagen structure, synthesis mechanisms, and the parameters that stimulate those mechanisms. Poly-l-lactic acid as a well-known biocompatible and biodegradable polymer has proved to stimulate collagen synthesis in various physical forms. As such, in this review special emphasis is laid on the effects of poly-l-lactic acid as well as its mechanism of action on collagen synthesis.

Bioresorption Control and Biological Response of Magnesium Alloy AZ31 Coated with Poly-β-Hydroxybutyrate

Magnesium and its alloys are not normally used as bioresorbable temporary implants due to their high and uncontrolled degradation rate in a physiological liquid environment. The improvement of corrosion resistance to simulated body fluids (SBF) of a magnesium alloy (AZ31) coated with poly-β-hydroxybutyrate (PHB) was investigated. Scanning electron microscopy, Fourier transform infrared spectrometer, and contact angle measurements were used to characterize surface morphology, material composition, and wettability, respectively. pH modification of the SBF corroding medium, mass of Mg2+ ions released, weight loss of the samples exposed to the SBF solution, and electrochemical experiments were used to describe the corrosion process and its kinetics. The material’s biocompatibility was described by evaluating the effect of corrosion by products collected in the SBF equilibrating solution on hemolysis ratio, cytotoxicity, nitric oxide (NO), and total antioxidant capacity (T-AOC). The results showed that the PHB coating can diffusively control the degradation rate of magnesium alloy, improving its biocompatibility: the hemolysis rate of materials was lower than 5%, while in vitro human umbilical vein endothelial cell (HUVEC) compatibility experiments showed that PHB-coated Mg alloy promoted cell proliferation and had no effect on the NO content and that the T-AOC was enhanced compared with the normal group and bare AZ31 alloy. PHB-coated AZ31 magnesium alloy extraction fluids have a less toxic behavior due to the lower concentration of corrosion byproducts deriving from the diffusion control exerted by the PHB coating films both from the metal surface to the solution and vice versa. These findings provide more reference value for the selection of such systems as tunable bioresorbable prosthetic materials.

Polyhydroxyalkanoate/Antifungal Polyene Formulations with Monomeric Hydroxyalkanoic Acids for Improved Antifungal Efficiency

Novel biodegradable and biocompatible formulations of "old" but "gold" drugs such as nystatin (Nys) and amphotericin B (AmB) were made using a biopolymer as a matrix. Medium chain length polyhydroxyalkanoates (mcl-PHA) were used to formulate both polyenes (Nys and AmB) in the form of films (~50 µm). Thermal properties and stability of the materials were not significantly altered by the incorporation of polyenes in mcl-PHA, but polyene containing materials were more hydrophobic. These formulations were tested in vitro against a panel of pathogenic fungi and for antibiofilm properties. The films containing 0.1 to 2 weight % polyenes showed good activity and sustained polyene release for up to 4 days. A PHA monomer, namely 3-hydroxydecanoic acid (C10-OH), was added to the films to achieve an enhanced synergistic effect with polyenes against fungal growth. Mcl-PHA based polyene formulations showed excellent growth inhibitory activity against both Candida yeasts (C. albicans ATCC 1023, C. albicans SC5314 (ATCC MYA-2876), C. parapsilosis ATCC 22019) and filamentous fungi (Aspergillus fumigatus ATCC 13073; Trichophyton mentagrophytes ATCC 9533, Microsporum gypseum ATCC 24102). All antifungal PHA film preparations prevented the formation of a C. albicans biofilm, while they were not efficient in eradication of mature biofilms, rendering them suitable for the transdermal application or as coatings of implants.

Additive manufacturing of polyhydroxyalkanoates (PHAs) biopolymers: Materials, printing techniques, and applications

Additive manufacturing (AM) is recently imposing as a fast, reliable, and highly flexible solution to process various materials, that range from metals to polymers, to achieve a broad variety of customized end-goods without involving the injection molding process. The employment of biomaterials is of utmost relevance as the environmental footprint of the process and, consequently, of the end-goods is significantly decreased. Additive manufacturing can provide, in particular, an all-in-one platform to fabricate complex-shaped biobased items such as bone implants or biomedical devices, that would be, otherwise, extremely troublesome and costly to achieve. Polyhydroxyalkanoates (PHAs) is an emerging class of biobased and biodegradable polymeric materials achievable by fermentation from bacteria. There are some promising scientific and technical reports on the manufacturing of several commodities in PHAs by additive manufacturing. However, many challenges must still be faced in order to expand further the use of PHAs. In this framework, the present work reviews and classifies the relevant papers focused on the design and development of PHAs for different 3D printing techniques and overviews the most recent applications of this approach.

Facial Rejuvenation With Fat Grafting and Fillers

Facial rejuvenation requires a multi-modality approach to address the sun damage, volume loss, and thinning of skin that occurs with aging. With age, the collagen fibrils that provide strength become fragmented and fibroblasts connections become weak, leading to skin laxity and loss of youthful skin. Fillers can lead to a more youthful appearance by providing volumetric support. Synthetic fillers such as hyaluronic acid products, calcium hydroxyapatite, polylactic acid, and polymethylmethacralate have bio-stimulatory affects, ranging from small effects on fibroblast production to prolonged stimulatory effects on dermal thickness and blood supply. Fat grafting is also an ideal technique for facial rejuvenation because it is readily available, natural, and has regenerative effects. This review describes a new technique of fat grafting for the face called Injectable Tissue Replacement and Regeneration that specifically addresses the different anatomic compartments of the face with volume loss. With this brief review, we aim to evaluate the currents trends of fat grafting and fillers in the management of facial rejuvenation, including the cellular changes that occur with facial aging, the bio-stimulatory effects of fillers, and the anatomic replacement of tissue with fat grafting. >Level of Evidence: 4.

Nonsurgical Methods for Penile Augmentation: A Systematic Review

BACKGROUND

There is no standardized approach for nonsurgical techniques for penile augmentation despite the increase of demand for this intervention.

OBJECTIVE

To compare the efficacy and safety between different injection techniques.

MATERIALS AND METHODS

On October 8, 2019, a literature search was performed on PubMed, Embase, Ovid, and Cochrane database. All articles describing penile augmentation were included.

RESULTS

Thirteen studies were included in this article with a total of 1,311 patients. Five studies were prospective cohort. The most commonly described technique was hyaluronic acid fillers with a total of 4 articles and 205 patients. The mean injected volume ranged from 20 to 40 mL. In all included studies, a minority of patients had side effects, but some had disabling complications.

CONCLUSION

There are no defined clinical guidelines for penile augmentation techniques implemented yet. Hyaluronic acid seems to be safe, efficient, and with a high satisfaction score. Further randomized control trials are warranted.

EBM LEVEL OF EVIDENCEBASED MEDICINE

2a.

Biocompatibility analysis of PLA based candidate materials for cardiovascular stents in a rat subcutaneous implant model

Modification of Polylactic acid (PLA), a biopolymer, is a strategy still to be fully explored for the next generation of bioresorbable vascular stent (BVS) biomaterials. With this focus, inclusions upto 5% of Polycaprolactone (PCL) and Magnesium in PLA were tested in the rat subcutaneous model and their cellular and tissue interactions characterized, specifically with respect to inflammatory response, angiogenesis and capsularization. The cytokines IL6, TNF Alpha and IL-1Beta were estimated in the peri-implant tissue, all of which showed a non-significant difference between the non-implanted animals and those containing PLA by 8 weeks, speaking to the benign nature of PLA as an implant biomaterial. Both modified materials, had increased macrophage counts and cytokine levels, except IL6 at 8 weeks. Vascularization only at 8 weeks in PLA PCL containing tissue was significantly higher than pure PLA, which may be more carefully controlled along with the material hydrophobicity for possible efforts towards therapeutic angiogenesis. Capsule thickness, measured by staining with both Hematoxylin & Eosin and Masson's Trichome did not show any differences between materials, including PLA.

Effect of Hyaluronic Acid and Poly-L-Lactic Acid Dermal Fillers on Collagen Synthesis: An in vitro and in vivo Study

Purpose

Skin ageing is marked by structural and functional changes in epidermis and dermis, which result clinically in wrinkles, loss of elasticity, and rough-textured appearance. In this context, different dermal fillers have been used to overcome these negative effects associated with skin ageing, such as hyaluronic acid (HA) and poly-L-lactic acid (PLLA). Despite their low immunogenicity, these materials can cause an inflammatory reaction after application.

Materials and Methods

Considering high demand of HA and PLLA as filler material, this study aimed to evaluate their in vitro and in vivo effects. For the in vitro study, human dermal fibroblast cell cultures were supplemented with HA or PLLA for 24, 48, and 72 h. The following parameters were assayed: 1) cell proliferation, 2) cell viability, and 3) quantification of type I collagen by ELISA. For the in vivo study, HA or PLLA was injected in the dermis of Wistar rats and the tissues were collected after 15, 30, and 60 days for histologic evaluation and for quantification of type I collagen by Western blotting. The quantitative data were statistically analyzed using an ANOVA two-way. The significance level was set at 5%.

Results

At 72 h, high cell proliferation was observed for HA compared to control (p<0.05). Cultures exposed to PLLA exhibited a reduction in both cell proliferation and viability compared to control in all time points (p<0.05). Type I collagen expression was greater in cultures exposed to HA or PLLA compared to control (p<0.05). Histologic analysis showed the presence of multinucleated cells only in the PLLA group in all experimental time points. Western blotting analysis revealed high content of type I collagen in HA compared to PLLA (p<0.05).

Conclusion

The present study addresses a potentially unfavorable effect of dermal PLLA filler on the fibroblast phenotype, with possible clinical complications, unlike HA.

Nano, micro particulate and cosmetic delivery systems of polylactic acid: A mini review

BACKGROUND

Poly lactic acid and its copolymers are considered to be the preferred substrates for drug delivery devices. Poly lactic acid is a biocompatible, biodegradable and nontoxic polymer. It was approved by Food and Drug Administration and thought to be among the most attractive polymeric candidates intended for controlling drug delivery. It was utilized for the development of devices for the delivery of small molecules, proteins, genes, vaccines, anticancer drugs, and macromolecules.

OBJECTIVES AND METHODS

This manuscript lists the different techniques for synthesizing poly lactic acid-based nano and microparticles such as emulsion-based methods, precipitation-based methods, direct compositing methods, in situ forming micro-particles, and microfluidic technique.

CONCLUSIONS

In addition, it describes the application and use of poly lactic acid in biomedical and cosmetic delivery systems.

Combination Therapy of Microneedle Fractional Radiofrequency and Topical Poly-Lactic Acid for Acne Scars: A Randomized Controlled Split-Face Study

BACKGROUND

Acne scarring occurs at a young age and causes distress for many patients. Various treatment modalities have been tried.

OBJECTIVE

This study investigated the efficacy of combination therapy with topical poly-lactic acid and microneedle fractional radiofrequency (MFRF) for acne scars.

MATERIALS AND METHODS

Patients with acne scars on both the cheeks were included. Poly-lactic acid was applied to the acne scars on one side of the face before MFRF treatment. The other side of the face was treated with MFRF and normal saline. Patients received 3 treatment sessions and were evaluated based on visual assessment and patient satisfaction. After the last treatment, objective scar assessment of scar smoothness, size, brightness, and overall improvement was performed.

RESULTS

Both acne scar assessment scores and patient satisfaction were better with combination therapy (p = .036 and p = .009, respectively) than with monotherapy. Combination therapy resulted in significantly better efficacy for scar smoothness (p < .001), scar size (p = .003), and overall improvement (p < .001), but not for brightness (p = .151).

CONCLUSION

Combination therapy resulted in significantly better clinical outcomes, including better scar smoothness and smaller scar size. Therefore, we believe this combination therapy is a safe and effective treatment for acne scars.

Fabrication and characterization of high molecular keratin based nanofibrous membranes for wound healing

Keratin is widely used in the biomaterial application, but the keratin prepared by the physical or chemical approach has relatively low molecular weight and mechanical properties. Here we report the preparation of high molecular keratin (HMK) with molecular weight of 120 kDa via multi-enzyme cascade pathway and its application in wound healing. Briefly, we prepared the soluble keratin from wool by keratinase and improved the molecular weight of keratin by transglutaminase (TGase). The HMK was coelectrospun with poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV) and the prepared nanofibrous mats demonstrated improved mechanical properties. Ag nanoparticles (AgNPs) were synthesized on the nanofibers via in situ bioreduction, using the above-mentioned keratinase as the reducing agent. It is demonstrated that the PHBV/HMK/AgNPs nanofibrous mats possess favorable antibacterial properties and good biocompatibility. Moreover, in vivo wound healing assessment, the PHBV/HMK/AgNPs membrane displayed better wound healing ability than the control group. These results indicate that PHBV/HMK/AgNPs mats exhibit significant potential in tissue engineering.

Reconstitution of Injectable Poly-d,l-lactic Acid: Efficacy of Different Diluents and a New Accelerating Method

Injectable poly-d,l-lactic acid (PDLLA) is a new collagen-stimulating filler containing PDLLA microspheres and carboxymethyl cellulose. It is available as a lyophilized powder that must be reconstituted with a diluent before administration. The aims of this study were to investigate the efficacy of different diluents and a new accelerating “back-and-forth” method.

Cosmetic treatment in patients with autoimmune connective tissue diseases: Best practices for patients with morphea/systemic sclerosis

Morphea and systemic sclerosis are inflammatory, sclerosing disorders. Morphea primarily affects the dermis and subcutaneous fat, while systemic sclerosis typically involves the skin and internal organs. Functional impairment and cosmetic disfigurement are common in both diseases. Treatment options to mitigate disease progression remain limited. Both functional impairment and cosmetic deficits negatively impact quality of life and psychological well-being in this patient population. While the number of cosmetic procedures performed in the United States continues to rise each year, limited data exist regarding best practices for correcting aesthetic deficits caused by autoimmune conditions. There is scarce information to guide safety decisions regarding laser parameters, soft tissue augmentation, treatment intervals, and the concurrent use of immune-modifying or immune-suppressing medications. Given the fears of disease reactivation and exacerbation from postprocedural inflammation along with limited data, it is difficult for clinicians to provide evidence-based cosmetic treatment with realistic expectations with regard to short- and long-term outcomes. In the first article in this continuing medical education series, we attempt to address this practice gap.

Formulation and characterization of a novel PHBV nanocomposite for bone defect filling and infection treatment

Biodegradable materials that combine bioactivity with sustained drug release have been proved promising for the treatment and prophylaxis of bone infection. In this work, injection-molded nanocomposites were formulated from poly(3-hydroxybutyrate-co-3-6%hydroxyvalerate) (PHBV), nanodiamond (nD) and nanohydroxyapatite (nHA) loaded with vancomycin (VC). The components were compounded using a rotary evaporator (PHBV/nHA/VC/nD-R) or a spray-dryer (PHBV/nHA/VC/nD-SD). The nanoparticles acted as a nucleating agent, increasing PHBV crystallinity from 57.1% to up to 73.3% (PHBV/nHA/VC/nD-SD). The nHA particles were found to be well distributed on the formulations fracture surface observed by SEM-EDS micrographs. PHBV/nHA/VC/nD-SD presented higher glass transition temperature (18.1 vs 14.8 °C) and stronger interface than PHBV/nHA/VC/nD-R, as determined by dynamic mechanical analysis (DMA). Furthermore, the incorporation of nanoparticles increased PHBV flexural elastic modulus by 34% and match the reported for human bone. Both systems were able to present a sustained release of VC for 22 days, reaching 7.1 ± 1.3%(PHBV/nHA/VC/nD-R) and 4.8 ± 0.6% (PHBV/nHA/VC/nD-SD). VC presented antibacterial activity even after being processed at 178 °C in an injection molding machine. Moreover, in vitro assays showed a good adhesion and growth of cells on the specimens and suggested a non-cytotoxic and non-cytostatic behavior. These findings indicate that these systems can be further explored as bone defect filling material.

Drug Release Kinetics of Electrospun PHB Meshes

Microbial poly(3-hydroxybutyrate) (PHB) has several advantages including its biocompatibility and ability to degrade in vivo and in vitro without toxic substances. This paper investigates the feasibility of electrospun PHB meshes serving as drug delivery systems. The morphology of the electrospun samples was modified by varying the concentration of PHB in solution and the solvent composition. Scanning electron microscopy of the electrospun PHB scaffolds revealed the formation of different morphologies including porous, filamentous/beaded and fiber structures. Levofloxacin was used as the model drug for incorporation into PHB electrospun meshes. The entrapment efficiency was found to be dependent on the viscosity of the PHB solution used for electrospinning and ranged from 14.4–81.8%. The incorporation of levofloxacin in electrospun meshes was confirmed by Fourier-transform infrared spectroscopy and UV-VIS spectroscopy. The effect of the morphology of the electrospun meshes on the levofloxacin release profile was screened in vitro in phosphate-buffered saline solution. Depending upon the morphology, the electrospun meshes released about 14–20% of levofloxacin during the first 24 h. The percentage of drug released after 13 days increased up to 32.4% and was similar for all tested morphologies. The antimicrobial efficiency of all tested samples independent of the morphology, was confirmed by agar diffusion testing.

Modeling the bioconversion of starch to P(HB-co-HV) optimized by experimental design using Bacillus megaterium BBST4 strain

Poly(hydroxybutyrate-co-hydroxyvalerate) (P(HB-co-HV)) is a prominent biopolymer as a potential candidate for use in the biomedical area. Several Bacillus spp. strains show promising characteristics in the use of several carbon sources and are an interesting alternative for the production of P(HB-co-HV). Sewage from the agricultural and food processing industries can be used to obtain abundantly starch as a carbon source for PHA production. The aim of the present study was to optimize by response surface methodology and desirability, the production of PHA by a Bacillus megaterium strain using starch as the sole carbon source. Two optimal conditions were determined without sporulation and were used to perform new experiments to calibrate and validate a mechanistic model, developed to simulate the dynamics of PHA and biomass production. The developed model successfully represents the kinetics of the microorganism. Employing different characterization techniques, it was determined that the PHA produced by the strain is a copolymer composed of different HB:HV proportions. Using starch as the sole carbon source in a minimal salt medium, this work shows the first reports in the literature of: 1) a mathematical model for predicting growth kinetic and PHA production for B. megaterium strain and 2) a Bacillus spp. producing P(HB-co-HV) copolymer.