1
|
Thornell TL, Wedgeworth DN, Antwine MD, Burroughs JF. Influence of Carbonyl Iron Particles (CIP) and Glass Microspheres on Thermal Properties of Poly(lactic acid) (PLA). Polymers (Basel) 2024; 16:2194. [PMID: 39125218 PMCID: PMC11314423 DOI: 10.3390/polym16152194] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/18/2024] [Revised: 07/29/2024] [Accepted: 07/30/2024] [Indexed: 08/12/2024] Open
Abstract
In this investigation, composite poly(lactic acid) (PLA) systems of hollow glass microspheres (MS) and carbonyl iron particles (CIP) were processed and characterized to investigate the effects of using conductive and insulating particles as additives in a polymer system. PLA-MS and PLA-CIP were set at the two levels of 3.94 and 7.77 vol.% for each particle type to study the effects of the particle material type and loading on neat PLA's thermal properties. It was observed during the twin-screw extrusion that the addition of CIP greatly decreased the viscosity of the PLA melt during processing. Correlations determined using thermogravimetric analysis, differential scanning calorimetry, thermal conductivity, and shear rheology provided insights into how thermal stability was affected. The incorporation of MS and CIP altered thermal properties such as the glass transition temperature (Tg), melting temperature (Tm), and cold crystallization temperature (Tcc). The metal CIP-filled systems had large increases in their thermal conductivity values and viscoelastic transitions compared to those with PLA that were correlated with the observed overheating during extrusion.
Collapse
Affiliation(s)
- Travis L. Thornell
- Geotechnical and Structures Laboratory, U.S. Army Engineer Research and Development Center, 3909 Halls Ferry Rd., Vicksburg, MS 39180, USA; (D.N.W.); (M.D.A.); (J.F.B.)
| | | | | | | |
Collapse
|
2
|
Hararak B, Wijaranakul P, Wanmolee W, Kraithong W, Keeratipinit K, Kaewket S, Winotapun C, Rungseesantivanon W. Self-Formation of Lignin Particles Through Melt-Extrusion for Active Biodegradable Food Packaging. ACS OMEGA 2024; 9:24346-24355. [PMID: 38882124 PMCID: PMC11171092 DOI: 10.1021/acsomega.3c10113] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/18/2023] [Revised: 05/20/2024] [Accepted: 05/23/2024] [Indexed: 06/18/2024]
Abstract
This study presents a method for the self-formation of lignin particles within a polylactic acid (PLA) matrix during melt-extrusion, eliminating the need for separation and drying steps typically associated with submicro-size lignin particles. This method effectively mitigates the problem of agglomeration often associated with the drying step. Softwood kraft lignin, guaiacyl lignin (GL-lignin), was dissolved in low-molecular-weight poly(ethylene glycol) (PEG) and was introduced into a twin-screw extruder using a liquid feeder. Lignin particles within a particle size range of 200-500 nm were observed in the extrudate of the PLA/PEG/GL-lignin composites. PLA/PEG/GL-lignin composite films were produced through blown film extrusion. These composite films demonstrated superior ultraviolet (UV)-barrier and antioxidant properties compared to neat PLA films, with optical and mechanical characteristics comparable to those of neat PLA. Moreover, migration values of the composite films in various food simulants were below regulatory limits, suggesting their potential for food packaging applications. This self-formation process offers a promising approach for utilizing lignin for PLA applications.
Collapse
Affiliation(s)
- Bongkot Hararak
- National Metal and Materials Technology Center (MTEC), National Science and Technology Development Agency, Khlong-Nueng, Khlong Luang, Pathumthani 12120, Thailand
| | - Pawarisa Wijaranakul
- National Metal and Materials Technology Center (MTEC), National Science and Technology Development Agency, Khlong-Nueng, Khlong Luang, Pathumthani 12120, Thailand
| | - Wanwitoo Wanmolee
- National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency, Khlong-Nueng, Khlong Luang, Pathumthani 12120, Thailand
| | - Wasawat Kraithong
- National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency, Khlong-Nueng, Khlong Luang, Pathumthani 12120, Thailand
| | - Kawin Keeratipinit
- National Metal and Materials Technology Center (MTEC), National Science and Technology Development Agency, Khlong-Nueng, Khlong Luang, Pathumthani 12120, Thailand
| | - Sanya Kaewket
- National Metal and Materials Technology Center (MTEC), National Science and Technology Development Agency, Khlong-Nueng, Khlong Luang, Pathumthani 12120, Thailand
| | - Charinee Winotapun
- National Metal and Materials Technology Center (MTEC), National Science and Technology Development Agency, Khlong-Nueng, Khlong Luang, Pathumthani 12120, Thailand
| | - Wuttipong Rungseesantivanon
- National Metal and Materials Technology Center (MTEC), National Science and Technology Development Agency, Khlong-Nueng, Khlong Luang, Pathumthani 12120, Thailand
| |
Collapse
|
3
|
Rajendran DS, Venkataraman S, Jha SK, Chakrabarty D, Kumar VV. A review on bio-based polymer polylactic acid potential on sustainable food packaging. Food Sci Biotechnol 2024; 33:1759-1788. [PMID: 38752115 PMCID: PMC11091039 DOI: 10.1007/s10068-024-01543-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/12/2023] [Revised: 01/31/2024] [Accepted: 02/05/2024] [Indexed: 05/18/2024] Open
Abstract
Poly(lactic acid) (PLA) stands as a compelling alternative to conventional plastic-based packaging, signifying a notable shift toward sustainable material utilization. This comprehensive analysis illuminates the manifold applications of PLA composites within the realm of the food industry, emphasizing its pivotal role in food packaging and preservation. Noteworthy attributes of PLA composites with phenolic active compounds (phenolic acid and aldehyde, terpenes, carotenoid, and so on) include robust antimicrobial and antioxidant properties, significantly enhancing its capability to bolster adherence to stringent food safety standards. The incorporation of microbial and synthetic biopolymers, polysaccharides, oligosaccharides, oils, proteins and peptides to PLA in packaging solutions arises from its inherent non-toxicity and outstanding mechanical as well as thermal resilience. Functioning as a proficient film producer, PLA constructs an ideal preservation environment by merging optical and permeability traits. Esteemed as a pioneer in environmentally mindful packaging, PLA diminishes ecological footprints owing to its innate biodegradability. Primarily, the adoption of PLA extends the shelf life of products and encourages an eco-centric approach, marking a significant stride toward the food industry's embrace of sustainable packaging methodologies. Graphical abstract
Collapse
Affiliation(s)
- Devi Sri Rajendran
- Integrated Bioprocessing Laboratory, Department of Biotechnology, School of Bioengineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology (SRM IST), Chengalpattu District, Kattankulathur, Tamil Nadu 603203 India
| | - Swethaa Venkataraman
- Integrated Bioprocessing Laboratory, Department of Biotechnology, School of Bioengineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology (SRM IST), Chengalpattu District, Kattankulathur, Tamil Nadu 603203 India
| | - Satyendra Kumar Jha
- Integrated Bioprocessing Laboratory, Department of Biotechnology, School of Bioengineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology (SRM IST), Chengalpattu District, Kattankulathur, Tamil Nadu 603203 India
| | - Disha Chakrabarty
- Integrated Bioprocessing Laboratory, Department of Biotechnology, School of Bioengineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology (SRM IST), Chengalpattu District, Kattankulathur, Tamil Nadu 603203 India
| | - Vaidyanathan Vinoth Kumar
- Integrated Bioprocessing Laboratory, Department of Biotechnology, School of Bioengineering, Faculty of Engineering and Technology, SRM Institute of Science and Technology (SRM IST), Chengalpattu District, Kattankulathur, Tamil Nadu 603203 India
| |
Collapse
|
4
|
S Al-Otaibi J, Mary YS, Mary YS, Cristina Gamberini M. SERS analysis, DFT, and solution effects regarding the structural and optical characteristics of folic acid biomolecule adsorbed on a Cu 3 metal cluster. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2024; 313:124161. [PMID: 38493513 DOI: 10.1016/j.saa.2024.124161] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/04/2024] [Revised: 03/07/2024] [Accepted: 03/13/2024] [Indexed: 03/19/2024]
Abstract
The optical characteristics of folic acid (ABP) and metal clusters of copper (Cu3) at various locations were investigated by means of density functional theory (DFT) computations. Mulliken charge analysis and molecular electrostatic potential (MEP) surface show how charge moves from Cu3 to ABP through the various groups. The peak in the UV-Vis spectra of ABP-Cu3 is caused by bonding and anti-bonding orbitals. In both vacuum and aqueous conditions, the polarizability values of ABP-Cu3 cluster are significantly higher than those of pure ABP, indicating a possible enhancement of the nonlinear optical (NLO) effect. Our research investigates the possibility of using ABP adsorbed metal clusters for NLO materials. Surface enhanced Raman scattering (SERS) in the ABP adsorbed metal clusters enhances the vibrational modes of ABP. Adsorption energies are found to be in the range -17.08 to -58.52 kcal/mol in vacuum and -53.34 to -93.44 kcal/mol in aqueous medium for the different configurations for ABP-Cu3. It indicates that metal clusters adsorbed by ABP are stable in the aqueous media. Experimental IR and UV-Vis of ABP is in agreement with theoretically predicted ones.
Collapse
Affiliation(s)
- Jamelah S Al-Otaibi
- Department of Chemistry, College of Science, Princess Nourah Bint Abdulrahman University, P.O. Box 84428, Riyadh 11671, Saudi Arabia.
| | - Y Sheena Mary
- Department of Physics, FMN College (Autonomous), Kollam, Kerala, University of Kerala, India
| | | | - Maria Cristina Gamberini
- Department of Life Sciences, University of Modena and Reggio Emilia, via G. Campi 103, 41125 Modena, Italy
| |
Collapse
|
5
|
Rader C, Grillo L, Weder C. Water and Oxygen Barrier Properties of All-Cellulose Nanocomposites. Biomacromolecules 2024; 25:1906-1915. [PMID: 38394342 DOI: 10.1021/acs.biomac.3c01337] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/25/2024]
Abstract
Hydroxypropyl cellulose (HPC) is potentially interesting as a biobased, rigid food packaging material, but its stiffness and strength are somewhat low, and its water and oxygen transport rates are too high. To improve these characteristics, we investigated nanocomposites of HPC and cellulose nanocrystals (CNCs). These high-aspect-ratio nanoparticles display high stiffness and strength, and their high crystallinity renders them virtually impermeable. Exchanging the counterions of sulfate-ester decorated CNCs with cetyltrimethylammonium ions affords particles that are dispersible in ethanol (CTA.CNC) and allows solvent casting of HPC/CTA.CNC nanocomposite films, which, even at a CTA.CNC content of 90 wt %, are highly transparent. The introduction of CTA.CNC considerably increases the Young's modulus (Ey) and upper tensile strength (σUTS). For example, in the nanocomposite with 90% CTA.CNC, Ey = 7.6 GPa is increased 20-fold and σUTS = 42.7 MPa is more than doubled in comparison to HPC, whereas the extensibility (1.1%) remains appreciable. Composites with a CTA.CNC content of 70 wt % or less show a lower water vapor permeability (6.4-9.2 × 10-5 g μm m-2 s-1 Pa-1) than the neat HPC (1.5 × 10-4 g μm m-2 s-1 Pa-1), whereas the oxygen permeability (5.6 × 10-7-1.3 × 10-6 cm3 μm m-2 s-1 Pa-1) is reduced by 1 order of magnitude compared to HPC (3.2 × 10-6 cm3 μm m-2 s-1 Pa-1). The biobased nanocomposites retain their mechanical integrity at a relative humidity of 75% but readily disintegrate in water.
Collapse
Affiliation(s)
- Chris Rader
- Adolphe Merkle Institute, Polymer Chemistry and Materials, University of Fribourg, Chemin des Verdiers 4, Fribourg 1700, Switzerland
| | - Luca Grillo
- Adolphe Merkle Institute, Polymer Chemistry and Materials, University of Fribourg, Chemin des Verdiers 4, Fribourg 1700, Switzerland
| | - Christoph Weder
- Adolphe Merkle Institute, Polymer Chemistry and Materials, University of Fribourg, Chemin des Verdiers 4, Fribourg 1700, Switzerland
| |
Collapse
|
6
|
Babolanimogadam N, Akhondzadeh Basti A, Khanjari A, Sajjadi Alhashem SH, Babolani Moghadgam K, Ahadzadeh S. Shelf life extending of probiotic beef patties with polylactic acid-ajwain essential oil films and stress effects on Bacillus coagulans. J Food Sci 2024; 89:866-880. [PMID: 38193159 DOI: 10.1111/1750-3841.16864] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/11/2023] [Revised: 11/14/2023] [Accepted: 11/15/2023] [Indexed: 01/10/2024]
Abstract
Meat and meat products are prone to the microbial and chemical spoilage, due to the high nutritional content. This study investigated the effect of polylactic acid (PLA) films incorporated with ajwain essential oil (AEO) on microbial (total viable count [TVC], psychrotrophic bacterial count [PTC], Enterobacteriaceae, Pseudomonas spp., yeast and mold (Y&M), and also Bacillus coagulans [BCG]), chemical (pH, peroxide value [PV], thiobarbituric acid-reactive substance [TBARS], and TVN values), and sensorial properties of beef patties, as well as survivability of BCG during refrigerated storage. Results showed that all microbial counts of samples were significantly increased, except BCG, during storage but the lowest TVC of samples was achieved in samples wrapped with PLA-1% AEO (8 log colony forming units per gram [CFU/g]) at 12th of storage, which is significantly lower than control treatments (10.66 log CFU/g). The best results in all treatments are those wrapped by PLA-1% AEO in all evaluated characteristics. At the final day of storage, PTC (8.82 log CFU/g), Enterobacteriaceae (5.05 log CFU/g), Pseudomonas spp. (9.08 log CFU/g), Y&M (4.69 log CFU/g), and also pH (4.5), PV (5.12 meq/kg), TBARS (2.92 MDA/kg), and TVN (14.43 mgN/100 g) values of PLA-1% AEO treatments were significantly lower than control samples. AEO-PLA films reduce the survival of BCG in raw patties, which reached 6.19 log CFU/g in PLA-1% AEO treatments, although increasing the concentration of AEO in packaging PLA films led to the maintenance of BCG viability during the cooking process by increasing the AEO in PLA films. Overall, results showed shelf life of beef patties is extended 3 days more (150%) by wrapping with PLA films incorporated with 1% AEO.
Collapse
Affiliation(s)
- Nima Babolanimogadam
- Department of Food Hygiene, Faculty of Veterinary Medicine, University of Tehran, Tehran, Iran
- Department of Food Science and Technology, Islamic Azad University, Science and Research Branch, Tehran, Iran
| | | | - Ali Khanjari
- Department of Food Hygiene, Faculty of Veterinary Medicine, University of Tehran, Tehran, Iran
| | | | - Kimiya Babolani Moghadgam
- Department of Agronomy and Plant Breeding, Faculty of Agriculture and Natural Resources, University of Mohaghegh Ardabili, Ardabil, Iran
| | - Sara Ahadzadeh
- Department of Pharmacology and Toxicology, School of Pharmacy, Ardabil University of Medical Sciences, Ardabil, Iran
| |
Collapse
|
7
|
Zhu J, Sun H, Yang B, Weng Y. Modified Biomass-Reinforced Polylactic Acid Composites. MATERIALS (BASEL, SWITZERLAND) 2024; 17:336. [PMID: 38255504 PMCID: PMC10817700 DOI: 10.3390/ma17020336] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/11/2023] [Revised: 01/07/2024] [Accepted: 01/08/2024] [Indexed: 01/24/2024]
Abstract
Polylactic acid (PLA), as a renewable and biodegradable green polymer material, is hailed as one of the most promising biopolymers capable of replacing petroleum-derived polymers for industrial applications. Nevertheless, its limited toughness, thermal stability, and barrier properties have restricted its extensive application. To address these drawbacks in PLA, research efforts have primarily focused on enhancing its properties through copolymerization, blending, and plasticization. Notably, the blending of modified biomass with PLA is expected not only to effectively improve its deficiencies but also to maintain its biodegradability, creating a fully green composite with substantial developmental prospects. This review provides a comprehensive overview of modified biomass-reinforced PLA, with an emphasis on the improvements in PLA's mechanical properties, thermal stability, and barrier properties achieved through modified cellulose, lignin, and starch. At the end of the article, a brief exploration of plasma modification of biomass is presented and provides a promising outlook for the application of reinforced PLA composite materials in the future. This review provides valuable insights regarding the path towards enhancing PLA.
Collapse
Affiliation(s)
- Junjie Zhu
- College of Light Industry Science and Engineering, Beijing Technology and Business University, Beijing 100048, China; (J.Z.); (B.Y.)
| | - Hui Sun
- College of Light Industry Science and Engineering, Beijing Technology and Business University, Beijing 100048, China; (J.Z.); (B.Y.)
- Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics, Beijing Technology and Business University, Beijing 100048, China
| | - Biao Yang
- College of Light Industry Science and Engineering, Beijing Technology and Business University, Beijing 100048, China; (J.Z.); (B.Y.)
| | - Yunxuan Weng
- College of Light Industry Science and Engineering, Beijing Technology and Business University, Beijing 100048, China; (J.Z.); (B.Y.)
- Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics, Beijing Technology and Business University, Beijing 100048, China
| |
Collapse
|
8
|
Grizzo A, Dos Santos DM, da Costa VPV, Lopes RG, Inada NM, Correa DS, Campana-Filho SP. Multifunctional bilayer membranes composed of poly(lactic acid), beta-chitin whiskers and silver nanoparticles for wound dressing applications. Int J Biol Macromol 2023; 251:126314. [PMID: 37586628 DOI: 10.1016/j.ijbiomac.2023.126314] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/09/2023] [Revised: 08/08/2023] [Accepted: 08/11/2023] [Indexed: 08/18/2023]
Abstract
Nanomaterial-based wound dressings have been extensively studied for the treatment of both minor and life-threatening tissue injuries. These wound dressings must possess several crucial characteristics, such as tissue compatibility, non-toxicity, appropriate biodegradability to facilitate wound healing, effective antibacterial activity to prevent infection, and adequate physical and mechanical strength to withstand repetitive dynamic forces that could potentially disrupt the healing process. Nevertheless, the development of nanostructured wound dressings that incorporate various functional micro- and nanomaterials in distinct architectures, each serving specific purposes, presents significant challenges. In this study, we successfully developed a novel multifunctional wound dressing based on poly(lactic acid) (PLA) fibrous membranes produced by solution-blow spinning (SBS) and electrospinning. The PLA-based membranes underwent surface modifications aimed at tailoring their properties for utilization as effective wound dressing platforms. Initially, beta-chitin whiskers were deposited onto the membrane surface through filtration, imparting hydrophilic character. Afterward, silver nanoparticles (AgNPs) were incorporated onto the beta-chitin layer using a spray deposition method, resulting in platforms with antimicrobial properties against both Staphylococcus aureus and Escherichia coli. Cytotoxicity studies demonstrated the biocompatibility of the membranes with the neonatal human dermal fibroblast (HDFn) cell line. Moreover, bilayer membranes exhibited a high surface area and porosity (> 80%), remarkable stability in aqueous media, and favorable mechanical properties, making them promising candidates for application as multifunctional wound dressings.
Collapse
Affiliation(s)
- Amanda Grizzo
- Sao Carlos Institute of Chemistry/University of Sao Paulo, 13566-590 Sao Carlos, Sao Paulo, Brazil; Nanotechnology National Laboratory for Agriculture (LNNA), Embrapa Instrumentação, 13560-970, Sao Carlos, Sao Paulo, Brazil
| | - Danilo M Dos Santos
- Nanotechnology National Laboratory for Agriculture (LNNA), Embrapa Instrumentação, 13560-970, Sao Carlos, Sao Paulo, Brazil
| | - Víttor P V da Costa
- Nanotechnology National Laboratory for Agriculture (LNNA), Embrapa Instrumentação, 13560-970, Sao Carlos, Sao Paulo, Brazil; PPGBiotec, Center for Exact Sciences and Technology, Federal University of Sao Carlos (UFSCar), 13565-905 Sao Carlos, Sao Paulo, Brazil
| | - Raphael G Lopes
- Sao Carlos Institute of Physics/University of Sao Paulo, PO Box 369, 13560-970 Sao Carlos, Sao Paulo, Brazil
| | - Natalia M Inada
- Sao Carlos Institute of Physics/University of Sao Paulo, PO Box 369, 13560-970 Sao Carlos, Sao Paulo, Brazil
| | - Daniel S Correa
- Nanotechnology National Laboratory for Agriculture (LNNA), Embrapa Instrumentação, 13560-970, Sao Carlos, Sao Paulo, Brazil; PPGBiotec, Center for Exact Sciences and Technology, Federal University of Sao Carlos (UFSCar), 13565-905 Sao Carlos, Sao Paulo, Brazil.
| | | |
Collapse
|
9
|
Siddiqui SA, Sundarsingh A, Bahmid NA, Nirmal N, Denayer JFM, Karimi K. A critical review on biodegradable food packaging for meat: Materials, sustainability, regulations, and perspectives in the EU. Compr Rev Food Sci Food Saf 2023; 22:4147-4185. [PMID: 37350102 DOI: 10.1111/1541-4337.13202] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/12/2022] [Revised: 05/22/2023] [Accepted: 06/04/2023] [Indexed: 06/24/2023]
Abstract
The development of biodegradable packaging is a challenge, as conventional plastics have many advantages in terms of high flexibility, transparency, low cost, strong mechanical characteristics, and high resistance to heat compared with most biodegradable plastics. The quality of biodegradable materials and the research needed for their improvement for meat packaging were critically evaluated in this study. In terms of sustainability, biodegradable packagings are more sustainable than conventional plastics; however, most of them contain unsustainable chemical additives. Cellulose showed a high potential for meat preservation due to high moisture control. Polyhydroxyalkanoates and polylactic acid (PLA) are renewable materials that have been recently introduced to the market, but their application in meat products is still limited. To be classified as an edible film, the mechanical properties and acceptable control over gas and moisture exchange need to be improved. PLA and cellulose-based films possess the advantage of protection against oxygen and water permeation; however, the addition of functional substances plays an important role in their effects on the foods. Furthermore, the use of packaging materials is increasing due to consumer demand for natural high-quality food packaging that serves functions such as extended shelf-life and contamination protection. To support the importance moving toward biodegradable packaging for meat, this review presented novel perspectives regarding ecological impacts, commercial status, and consumer perspectives. Those aspects are then evaluated with the specific consideration of regulations and perspective in the European Union (EU) for employing renewable and ecological meat packaging materials. This review also helps to highlight the situation regarding biodegradable food packaging for meat in the EU specifically.
Collapse
Affiliation(s)
- Shahida Anusha Siddiqui
- Technical University of Munich, Department for Biotechnology and Sustainability, Straubing, Germany
- German Institute of Food Technologies (DIL e.V.), Quakenbrück, Germany
| | | | - Nur Alim Bahmid
- Research Center for Food Technology and Processing, National Research and Innovation Agency (BRIN), Yogyakarta, Indonesia
| | - Nilesh Nirmal
- Institute of Nutrition, Mahidol University, Salaya, Nakhon Pathom, Thailand
| | - Joeri F M Denayer
- Department of Chemical Engineering, Vrije Universiteit Brussel, Brussels, Belgium
| | - Keikhosro Karimi
- Department of Chemical Engineering, Vrije Universiteit Brussel, Brussels, Belgium
- Department of Chemical Engineering, Isfahan University of Technology, Isfahan, Iran
| |
Collapse
|
10
|
Orsuwan A. Effect of cellulose nanocrystals and green synthesized silver nanoparticles on mechanical properties and antimicrobial activity of banana flour/agar composite films. Heliyon 2023; 9:e15102. [PMID: 37095933 PMCID: PMC10121399 DOI: 10.1016/j.heliyon.2023.e15102] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2022] [Revised: 03/24/2023] [Accepted: 03/27/2023] [Indexed: 04/03/2023] Open
Abstract
This study characterized the physicochemical and functional properties of nanocomposite films synthesized by incorporating cotton linter cellulose nanocrystals (CN) and green silver nanoparticles (AgNPs) into banana flour/agar. The results showed that CN could not enhance the tensile strength of the B/A nanocomposite films, but it did prolong the antibacterial activity against the Gram-positive bacterium Listeria monocytogenes when combined with AgNPs. However, the binary blend of CN and AgNPs resulted in a flocculated morphology on the film surface, causing an increase in the film brittleness and a decrease in the water solubility, elongation, and final decomposition temperature. Unfortunately, none of the nanocomposite films were found to inhibit the growth of the Gram-negative species Escherichia coli within 12 h. Further research is needed to assess the migration release of CN/AgNPs in nanocomposite films and to determine their potential for use as active food packaging.
Collapse
|
11
|
Ladhari S, Vu NN, Boisvert C, Saidi A, Nguyen-Tri P. Recent Development of Polyhydroxyalkanoates (PHA)-Based Materials for Antibacterial Applications: A Review. ACS APPLIED BIO MATERIALS 2023; 6:1398-1430. [PMID: 36912908 DOI: 10.1021/acsabm.3c00078] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 03/14/2023]
Abstract
The diseases caused by microorganisms are innumerable existing on this planet. Nevertheless, increasing antimicrobial resistance has become an urgent global challenge. Thus, in recent decades, bactericidal materials have been considered promising candidates to combat bacterial pathogens. Recently, polyhydroxyalkanoates (PHAs) have been used as green and biodegradable materials in various promising alternative applications, especially in healthcare for antiviral or antiviral purposes. However, it lacks a systematic review of the recent application of this emerging material for antibacterial applications. Therefore, the ultimate goal of this review is to provide a critical review of the state of the art recent development of PHA biopolymers in terms of cutting-edge production technologies as well as promising application fields. In addition, special attention was given to collecting scientific information on antibacterial agents that can potentially be incorporated into PHA materials for biological and durable antimicrobial protection. Furthermore, the current research gaps are declared, and future research perspectives are proposed to better understand the properties of these biopolymers as well as their possible applications.
Collapse
Affiliation(s)
- Safa Ladhari
- Department of Chemistry, Biochemistry and Physics, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, Québec G8Z 4M3, Canada.,Laboratory of Advanced Materials for Energy and Environment, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, Québec G8Z 4M3, Canada
| | - Nhu-Nang Vu
- Department of Chemistry, Biochemistry and Physics, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, Québec G8Z 4M3, Canada.,Laboratory of Advanced Materials for Energy and Environment, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, Québec G8Z 4M3, Canada
| | - Cédrik Boisvert
- Department of Chemistry, Biochemistry and Physics, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, Québec G8Z 4M3, Canada.,Laboratory of Advanced Materials for Energy and Environment, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, Québec G8Z 4M3, Canada
| | - Alireza Saidi
- Laboratory of Advanced Materials for Energy and Environment, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, Québec G8Z 4M3, Canada.,Institut de Recherche Robert-Sauvé en Santé et Sécurité du Travail (IRSST), 505 Boulevard de Maisonneuve Ouest, Montréal, Québec H3A 3C2, Canada
| | - Phuong Nguyen-Tri
- Department of Chemistry, Biochemistry and Physics, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, Québec G8Z 4M3, Canada.,Laboratory of Advanced Materials for Energy and Environment, Université du Québec à Trois-Rivières (UQTR), 3351 Boulevard des Forges, Trois-Rivières, Québec G8Z 4M3, Canada
| |
Collapse
|
12
|
Li Z, Zhu G, Lin N. Dispersibility Characterization of Cellulose Nanocrystals in Polymeric-Based Composites. Biomacromolecules 2022; 23:4439-4468. [PMID: 36195577 DOI: 10.1021/acs.biomac.2c00987] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Abstract
Cellulose nanocrystals (CNCs) are hydrophilic nanoparticles extracted from biomass with properties and functions different from cellulose and are being developed for property-oriented applications such as high stiffness, abundant active groups, and biocompatibility. It has broad application prospects in the field of composite materials, while the dispersibility of the CNC in polymers is the key to its application performance. Many reviews have discussed in-depth the modification strategies to improve the dispersibility of the CNC and summarized all characterization for the CNC, but there are no reviews on the in-depth exploration of dispersion characterization. This review is a comprehensive summary of the characterization of CNC dispersion in the matrix in terms of direct observation, indirect evaluation, and quantified evaluation, summarizing how and why different characterization tools reveal dispersibility. In addition, "decision tree" flowcharts are presented to provide the reader with a reference for selecting the appropriate characterization method for a specific composite.
Collapse
Affiliation(s)
- Zikang Li
- School of Chemistry, Chemical Engineering and Life Sciences, Wuhan University of Technology, Luoshi Road #122, Wuhan430070, P. R. China
| | - Ge Zhu
- School of Chemistry, Chemical Engineering and Life Sciences, Wuhan University of Technology, Luoshi Road #122, Wuhan430070, P. R. China
| | - Ning Lin
- School of Chemistry, Chemical Engineering and Life Sciences, Wuhan University of Technology, Luoshi Road #122, Wuhan430070, P. R. China
| |
Collapse
|
13
|
Santillo C, Wang Y, Buonocore GG, Gentile G, Verdolotti L, Kaciulis S, Xia H, Lavorgna M. Hybrid Graphenene Oxide/Cellulose Nanofillers to Enhance Mechanical and Barrier Properties of Chitosan-Based Composites. Front Chem 2022; 10:926364. [PMID: 35958229 PMCID: PMC9361047 DOI: 10.3389/fchem.2022.926364] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/22/2022] [Accepted: 06/16/2022] [Indexed: 11/23/2022] Open
Abstract
Chitosan-based hybrid nanocomposites, containing cellulose nanocrystals (CNCs), graphene oxide (GO), and borate as crosslinking agents, were successfully prepared by solution-casting technique. The synergistic effect of the two fillers, and the role of the cross-linker, in enhancing the structural and functional properties of the chitosan polymer, was investigated. XPS results confirm the chemical interaction between borate ions and hydroxyl groups of chitosan, GO, and CNCs. The morphological characterization shows that the GO sheets are oriented along the casting surface, whereas the CNC particles are homogenously distributed in the sample. Results of tensile tests reveal that the presence of graphene oxide enhances the elastic modulus, tensile strength, elongation at break, and toughness of chitosan, while cellulose and borate induce an increase in the elastic modulus and stress at the yield point. In particular, the borate-crosslinked chitosan-based sample containing 0.5 wt% of GO and 0.5 wt% of CNCs shows an elongation at a break value of 30.2% and a toughness value of 988 J*m−3 which are improved by 124% and 216%, respectively, compared with the pristine chitosan. Moreover, the water permeability results show that the presence of graphene oxide slightly increases the water barrier properties, whereas the borate and cellulose nanocrystals significantly reduce the water vapor permeability of the polymer by about 50%. Thus, by modulating the content of the two reinforcing fillers, it is possible to obtain chitosan-based nanocomposites with enhanced mechanical and water barrier properties which can be potentially used in various applications such as food and electronic packaging.
Collapse
Affiliation(s)
- C. Santillo
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
| | - Yinglei Wang
- Xi’an Modern Chemistry Research Institute, Xi’an, China
| | - G. G. Buonocore
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
- *Correspondence: G. G. Buonocore,
| | - G. Gentile
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
| | - L. Verdolotti
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
| | - Saulius Kaciulis
- Institute for the Study of Nanostructured Materials, National Research Council, Rome, Italy
| | - H. Xia
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
- State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu, China
| | - M. Lavorgna
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
- Institute of Polymers, Composites and Biomaterials UOS Lecco, National Research Council, Lecco, Italy
| |
Collapse
|
14
|
Vijay P, Batchelor W, Saito K. Preparation of coumarin polymer grafted nanocellulose films to form high performance, photoresponsive barrier layers. JOURNAL OF POLYMER SCIENCE 2022. [DOI: 10.1002/pol.20220248] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/11/2022]
Affiliation(s)
- Poornima Vijay
- School of Chemistry Monash University Clayton Victoria Australia
| | - Warren Batchelor
- Chemical Engineering Department Monash University Melbourne Victoria Australia
| | - Kei Saito
- School of Chemistry Monash University Clayton Victoria Australia
- Graduate School of Advanced Integrated Studies in Human Survivability Kyoto University Kyoto Japan
| |
Collapse
|
15
|
Poly(Lactic Acid) (PLA)-Based Nanocomposites: Impact of Vermiculite, Silver, and Graphene Oxide on Thermal Stability, Isothermal Crystallization, and Local Mechanical Behavior. JOURNAL OF COMPOSITES SCIENCE 2022. [DOI: 10.3390/jcs6040112] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
The structural, thermal, and mechanical properties of unreinforced and reinforced polylactic acid (PLA) were investigated. The PLA was a biopolymer that was reinforced with four fillers (i.e., graphene oxide (GO) and silver (Ag); vermiculite (VMT) and silver (Ag); and two organically modified vermiculites). The processing technique for the production of the composite materials were carefully planned. The PLA nanocomposites were investigated by examining their morphological aspects, changes in PLA phases and transitions and, most importantly, the effect on certain final properties. X-ray diffraction and differential scanning calorimetry (DSC) analysis indicated that the sample was completely amorphous. Thermogravimetric analysis (TGA) results indicated that the presence of reinforcing particles in the PLA matrix did not affect the thermal degradation of these composites. Furthermore, the local mechanical properties were investigated using the microindentation method to evaluate the effect of different nanofillers. Scanning electron microscopy (SEM) and a VHX-500 optical digital microscope (Keyence International, Mechelen, Belgium) were also used to examine the surface morphology of the PLA polymer composites. These results can help to select suitable fillers to enhance the PLA performance of biopolymers.
Collapse
|
16
|
|
17
|
Hafttananian N, Zabihzadeh Khajavi M, Farhoodi M, Jahanbin K, Ebrahimi Pure A. Migration of nano-clay and nano-silica from low-density polyethylene nanocomposites into different food simulants. JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION 2021. [DOI: 10.1007/s11694-021-00972-0] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/21/2022]
|
18
|
M. Rangaraj V, Rambabu K, Banat F, Mittal V. Natural antioxidants-based edible active food packaging: An overview of current advancements. FOOD BIOSCI 2021. [DOI: 10.1016/j.fbio.2021.101251] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/07/2023]
|
19
|
Cui R, Fan C, Dong X, Fang K, Li L, Qin Y. Effect of ultrahigh-pressure treatment on the functional properties of poly(lactic acid)/ZnO nanocomposite food packaging film. JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE 2021; 101:4925-4933. [PMID: 33543471 DOI: 10.1002/jsfa.11136] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/24/2020] [Revised: 01/16/2021] [Accepted: 02/04/2021] [Indexed: 06/12/2023]
Abstract
BACKGROUND Our living environment is being increasingly polluted by petroleum-based plastics and there is an increasing demand for biodegradable food packaging. In this study, the effect of various ultrahigh-pressure (UHP) treatments (0, 200 and 400 MPa) on the microstructure and thermal, barrier and mechanical properties of poly(lactic acid) (PLA)/ZnO nanocomposite films was studied. RESULTS The film-forming solution was processed using UHP technology. The crystallinity, strength and stiffness of the composite film after UHP treatment increased. In addition, barrier property analysis showed that the UHP treatment significantly (P < 0.05) reduced the oxygen permeability and water vapor permeability (WVP) coefficient of the PLA/ZnO nanocomposite film. Furthermore, the WVP value of the film treated at 400 MPa (50 g kg-1 nano-ZnO content) was the lowest and reduced by 47.3% compared with that of pure PLA film. The improvement in these properties might be due to the interaction between nano-ZnO and PLA matrix promoted by UHP treatment. CONCLUSIONS Therefore, the application of UHP technology on the film-forming solution could improve the crystallinity and functional properties of the nanocomposite film, and has great potential in the production of food packaging films with ideal functions. © 2021 Society of Chemical Industry.
Collapse
Affiliation(s)
- Rui Cui
- Institute of Agriculture and Food Engineering, Kunming University of Science and Technology, Kunming, China
| | - Chunli Fan
- Institute of Agriculture and Food Engineering, Kunming University of Science and Technology, Kunming, China
| | - Xuelan Dong
- Institute of Agriculture and Food Engineering, Kunming University of Science and Technology, Kunming, China
| | - Ke Fang
- Institute of Agriculture and Food Engineering, Kunming University of Science and Technology, Kunming, China
| | - Lin Li
- School of Chemical Engineering and Energy Technology, Dongguan University of Technology, Dongguan, China
| | - Yuyue Qin
- Institute of Agriculture and Food Engineering, Kunming University of Science and Technology, Kunming, China
| |
Collapse
|
20
|
Preparation of a multifunctional silver nanoparticles polylactic acid food packaging film using mango peel extract. Int J Biol Macromol 2021; 188:678-688. [PMID: 34343590 DOI: 10.1016/j.ijbiomac.2021.07.161] [Citation(s) in RCA: 16] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/20/2021] [Revised: 07/21/2021] [Accepted: 07/23/2021] [Indexed: 11/22/2022]
Abstract
As high-efficiency, safe, and low-drug resistant antibacterial agents, silver nanoparticles (AgNPs) have been widely applied in food and biomedicine. AgNPs was prepared using mango peel extract (MPE) as green and cheap reducing agent and stabilizer. In addition, a novel of preservative film material was developed with polylactic acid (PLA) as protective and substrate. AgNPs was characterized by XPS, XRD and TEM, and the size of AgNPs were in the range of 2.5-6.5 nm. The addition of AgNPs improved the mechanical properties of the film and its barrier ability to water vapor and oxygen. The film exhibited excellent antibacterial properties, and the inhibition rate against Escherichia coli and Staphylococcus aureus were above 95%. Furthermore, in terms of safety, the silver migration and cytotoxicity of the film met the relevant standards, and the shelf life of strawberries was significantly extended.
Collapse
|
21
|
Dhali K, Ghasemlou M, Daver F, Cass P, Adhikari B. A review of nanocellulose as a new material towards environmental sustainability. THE SCIENCE OF THE TOTAL ENVIRONMENT 2021; 775:145871. [PMID: 33631573 DOI: 10.1016/j.scitotenv.2021.145871] [Citation(s) in RCA: 101] [Impact Index Per Article: 33.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/13/2020] [Revised: 02/09/2021] [Accepted: 02/10/2021] [Indexed: 06/12/2023]
Abstract
Synthetic polymers, commonly referred to as plastics, are anthropogenic contaminants that adversely affect the natural ecosystems. The continuous disposal of long lifespan plastics has resulted in the accumulation of plastic waste, leading to significant pollution of both marine and terrestrial habitats. Scientific pursuit to seek environment-friendly materials from renewable resources has focused on cellulose, the primary reinforcement component of the cell wall of plants, as it is the most abundantly available biopolymer on earth. This paper provides an overview on the current state of science on nanocellulose research; highlighting its extraction procedures from lignocellulosic biomass. Literature shows that the process used to obtain nanocellulose from lignocellulosic biomass greatly influences its morphology, properties and surface chemistry. The efficacy of chemical methods that use alkali, acid, bleaching agents, ionic liquids, deep eutectic solvent for pre-treatment of biomass is discussed. There has been a continuous endeavour to optimize the pre-treatment protocol as it is specific to lignocellulosic biomass and also depends on factors such as nature of the biomass, process and environmental parameters and economic viability. Nanofibers are primarily isolated through mechanical fibrillation while nanocrystals are predominantly extracted using acid hydrolysis. A concise overview on the ways to improve the yield of nanocellulose from cellulosic biomass is also presented in this review. This work also reviews the techniques used to modify the surface properties of nanocellulose by functionalizing surface hydroxyl groups to impart desirable hydrophilic-hydrophobic balance. An assessment on the emerging application of nanocellulose with an emphasis on development of nanocomposite materials for designing environmentally sustainable products is incorporated. Finally, the status of the industrial production of nanocellulose presented, which indicates that there is a continuously increased demand for cellulose nanomaterials. The demand for cellulose is expected to increase further due to its increasing and broadening applications.
Collapse
Affiliation(s)
- Kingshuk Dhali
- School of Science, RMIT University, Melbourne, VIC 3083, Australia; Department of Post-Harvest Engineering, Faculty of Agricultural Engineering, Bidhan Chandra Krishi Viswavidyalaya, Nadia, W.B., India
| | - Mehran Ghasemlou
- School of Science, RMIT University, Melbourne, VIC 3083, Australia
| | - Fugen Daver
- School of Engineering, RMIT University, Melbourne, VIC 3083, Australia
| | - Peter Cass
- Manufacturing, Commonwealth Scientific and Industrial Research Organization (CSIRO) Clayton, VIC 3168, Australia
| | - Benu Adhikari
- School of Science, RMIT University, Melbourne, VIC 3083, Australia.
| |
Collapse
|
22
|
Wibawa PJ, Nur M, Asy’ari M, Wijanarka W, Susanto H, Sutanto H, Nur H. Green Synthesized Silver Nanoparticles Immobilized on Activated Carbon Nanoparticles: Antibacterial Activity Enhancement Study and Its Application on Textiles Fabrics. Molecules 2021; 26:3790. [PMID: 34206375 PMCID: PMC8270246 DOI: 10.3390/molecules26133790] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2021] [Revised: 06/06/2021] [Accepted: 06/13/2021] [Indexed: 11/16/2022] Open
Abstract
This research aimed to enhance the antibacterial activity of silver nanoparticles (AgNPs) synthesized from silver nitrate (AgNO3) using aloe vera extract. It was performed by means of incorporating AgNPs on an activated carbon nanoparticle (ACNPs) under ultrasonic agitation (40 kHz, 2 × 50 watt) for 30 min in an aqueous colloidal medium. The successful AgNPs synthesis was clarified with both Ultraviolet-Visible (UV-Vis) and Fourier Transform Infrared (FTIR) spectrophotometers. The successful AgNPs-ACNPs incorporation and its particle size analysis was performed using Transmission Electron Microscope (TEM). The brown color suspension generation and UV-Vis's spectra maximum wavelength at around 480 nm confirmed the existence of AgNPs. The particle sizes of the produced AgNPs were about 5 to 10 nm in the majority number, which collectively surrounded the aloe vera extract secondary metabolites formed core-shell like nanostructure of 8.20 ± 2.05 nm in average size, while ACNPs themselves were about 20.10 ± 1.52 nm in average size formed particles cluster, and 48.00 ± 8.37 nm in average size as stacking of other particles. The antibacterial activity of the synthesized AgNPs and AgNPs-immobilized ACNPs was 57.58% and 63.64%, respectively (for E. coli); 61.25%, and 93.49%, respectively (for S. aureus). In addition, when the AgNPs-immobilized ACNPs material was coated on the cotton and polyester fabrics, the antibacterial activity of the materials changed, becoming 19.23% (cotton; E. coli), 31.73% (polyester; E. coli), 13.36% (cotton; S. aureus), 21.15% (polyester; S. aureus).
Collapse
Affiliation(s)
- Pratama Jujur Wibawa
- Department of Chemistry, Faculty of Sciences and Mathematics, Diponegoro University, Jalan Prof. H. Soedarto, SH. No.1 Tembalang, Semarang 50275, Indonesia;
| | - Muhammad Nur
- Department of Physics, Faculty of Sciences and Mathematics, Diponegoro University, Jalan Prof. H. Soedarto, SH. No.1 Tembalang, Semarang 50275, Indonesia; (M.N.); (H.S.)
| | - Mukhammad Asy’ari
- Department of Chemistry, Faculty of Sciences and Mathematics, Diponegoro University, Jalan Prof. H. Soedarto, SH. No.1 Tembalang, Semarang 50275, Indonesia;
| | - Wijanarka Wijanarka
- Department of Biology, Faculty of Sciences and Mathematics, Diponegoro University, Jalan Prof. H. Soedarto, SH. No.1 Tembalang, Semarang 50275, Indonesia;
| | - Heru Susanto
- Department of Chemical Engineering, Faculty of Enginering, Diponegoro University, Jalan Prof. H. Soedarto, SH. No.1 Tembalang, Semarang 50275, Indonesia;
| | - Heri Sutanto
- Department of Physics, Faculty of Sciences and Mathematics, Diponegoro University, Jalan Prof. H. Soedarto, SH. No.1 Tembalang, Semarang 50275, Indonesia; (M.N.); (H.S.)
| | - Hadi Nur
- Center for Sustainable Nanomaterials, Inbu Sina Institute for Scientific and Industrial Research, Universiti Teknologi Malaysia, Skudai 81310, Johor, Malaysia;
- Central Laboratory of Minerals and Advanced Materials, Faculty of Mathematica and Natural Sciences, State University of Malang, Malang 65145, Indonesia
| |
Collapse
|
23
|
Polysaccharide-Based Packaging Functionalized with Inorganic Nanoparticles for Food Preservation. POLYSACCHARIDES 2021. [DOI: 10.3390/polysaccharides2020026] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023] Open
Abstract
Functionalization of polysaccharide-based packaging incorporating inorganic nanoparticles for food preservation is an active research area. This review summarizes the use of polysaccharide-based materials functionalized with inorganic nanoparticles (TiO2, ZnO, Ag, SiO2, Al2O3, Fe2O3, Zr, MgO, halloysite, and montmorillonite) to develop hybrid packaging for fruit, vegetables, meat (lamb, minced, pork, and poultry), mushrooms, cheese, eggs, and Ginkgo biloba seeds preservation. Their effects on quality parameters and shelf life are also discussed. In general, treated fruit, vegetables, mushrooms, and G. biloba seeds markedly increased their shelf life without significant changes in their sensory attributes, associated with a slowdown effect in the ripening process (respiration rate) due to the excellent gas exchange and barrier properties that effectively prevented dehydration, weight loss, enzymatic browning, microbial infections by spoilage and foodborne pathogenic bacteria, and mildew apparition in comparison with uncoated or polysaccharide-coated samples. Similarly, hybrid packaging showed protective effects to preserve meat products, cheese, and eggs by preventing microbial infections and lipid peroxidation, extending the food product’s shelf life without changes in their sensory attributes. According to the evidence, polysaccharide-hybrid packaging can preserve the quality parameters of different food products. However, further studies are needed to guarantee the safe implementation of these organic–inorganic packaging materials in the food industry.
Collapse
|
24
|
Versatile nanocellulose-based nanohybrids: A promising-new class for active packaging applications. Int J Biol Macromol 2021; 182:1915-1930. [PMID: 34058213 DOI: 10.1016/j.ijbiomac.2021.05.169] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2021] [Revised: 05/25/2021] [Accepted: 05/25/2021] [Indexed: 12/20/2022]
Abstract
The food packaging industry is rapidly growing as a consequence of the development of nanotechnology and changing consumers' preferences for food quality and safety. In today's globalization of markets, active packaging has achieved many advantages with the capability to absorb or release substances for prolonging the food shelf life over the traditional one. Therefore, it is critical to developing multifunctional active packaging materials from biodegradable polymers with active agents to decrease environmental challenges. This review article addresses the recent advances in nanocelluloses (NCs)- baseds nanohybrids with new function features in packaging, focusing on the various synthesis methods of NCs-based nanohybrids, and their reinforcing effects as active agents on food packaging properties. The applications of NCs-based nanohybrids as antioxidants, antimicrobial agents, and UV blocker absorbers for prolonging food shelf-life are also reviewed. Overall, these advantages make the CNs-based nanohybrids with versatile properties promising in food and packaging industries, which will impact more readership with concern for future research.
Collapse
|
25
|
Mulla MZ, Rahman MRT, Marcos B, Tiwari B, Pathania S. Poly Lactic Acid (PLA) Nanocomposites: Effect of Inorganic Nanoparticles Reinforcement on Its Performance and Food Packaging Applications. Molecules 2021; 26:1967. [PMID: 33807351 PMCID: PMC8036597 DOI: 10.3390/molecules26071967] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/01/2021] [Revised: 03/22/2021] [Accepted: 03/26/2021] [Indexed: 11/17/2022] Open
Abstract
Poly lactic acid (PLA) is a compostable, as well as recyclable, sustainable, versatile and environmentally friendly alternative, because the monomer of PLA-lactide (LA) is extracted from natural sources. PLA's techno-functional properties are fairly similar to fossil-based polymers; however, in pristine state, its brittleness and delicacy during processing pose challenges to its potential exploitation in diverse food packaging applications. PLA is, therefore, re-engineered to improve its thermal, rheological, barrier and mechanical properties through nanoparticle (NP) reinforcement. This review summarises the studies on PLA-based nanocomposites (PLA NCs) developed by reinforcing inorganic metal/metallic oxide, graphite and silica-based nanoparticles (NPs) that exhibit remarkable improvement in terms of storage modulus, tensile strength, crystallinity, glass transition temperature (Tg) value, antimicrobial property and a decrease in water vapour and oxygen permeability when compared with the pristine PLA films. This review has also discussed the regulations around the use of metal oxide-based NPs in food packaging, PLA NC biodegradability and their applications in food systems. The industrial acceptance of NCs shows highly promising perspectives for the replacement of traditional petrochemical-based polymers currently being used for food packaging.
Collapse
Affiliation(s)
- Mehrajfatema Zafar Mulla
- Food and Nutrition Program, Environment & Life Sciences Research Center, Kuwait Institute for Scientific Research, P.O. Box 24885, Safat 13109, Kuwait;
| | - Md Ramim Tanver Rahman
- Faculty of Pharmacy and Institute of Nutrition and Functional Foods, Université Laval, Québec, QC G1V 0A6, Canada;
- Laboratory of Medicinal Chemistry, CHU de Québec Research Centre, 2705 Boulevard Laurier, Québec, QC G1V 4G2, Canada
| | - Begonya Marcos
- IRTA, Food Quality and Technology, Finca Camps i Armet s/n, 17121 Monells, Spain;
| | - Brijesh Tiwari
- Teagasc Food Research Centre, Food Chemistry and Technology Department, Ashtown, D15 KN3K Dublin, Ireland
| | - Shivani Pathania
- Teagasc Food Research Centre, Food Industry Development Department, Ashtown, D15 KN3K Dublin, Ireland;
| |
Collapse
|
26
|
Banerjee R, Ray SS. An overview of the recent advances in polylactide‐based sustainable nanocomposites. POLYM ENG SCI 2021. [DOI: 10.1002/pen.25623] [Citation(s) in RCA: 27] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Affiliation(s)
- Ritima Banerjee
- Department of Chemical Engineering Calcutta Institute of Technology Howrah India
| | - Suprakas Sinha Ray
- Centre for Nanostructures and Advanced Materials, DSI‐CSIR Nanotechnology Innovation Centre Council for Scientific and Industrial Research Pretoria South Africa
- Department of Chemical Sciences University of Johannesburg Johannesburg South Africa
| |
Collapse
|
27
|
Negahdari M, Partovi R, Talebi F, Babaei A, Abdulkhani A. Preparation, characterization, and preservation performance of active polylactic acid film containing
Origanum majorana
essential oil and zinc oxide nanoparticles for ground meat packaging. J FOOD PROCESS PRES 2021. [DOI: 10.1111/jfpp.15013] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
Affiliation(s)
- Maryam Negahdari
- Department of Food Hygiene Faculty of Veterinary Medicine Amol University of Special Modern Technologies Amol Iran
| | - Razieh Partovi
- Department of Food Hygiene Faculty of Veterinary Medicine Amol University of Special Modern Technologies Amol Iran
| | - Fazeleh Talebi
- Department of Food Hygiene Faculty of Veterinary Medicine University of Tehran Tehran Iran
| | - Amir Babaei
- Department of Polymer Engineering Faculty of Engineering Golestan University Gorgan Iran
| | - Ali Abdulkhani
- Department of Wood and Paper Science and Technology Faculty of Natural Resources University of Tehran Karaj Iran
| |
Collapse
|
28
|
Gelatin-Based Nanocomposite Film with Bacterial Cellulose–MgO Nanoparticles and Its Application in Packaging of Preserved Eggs. COATINGS 2021. [DOI: 10.3390/coatings11010039] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Preserved eggs are prone to lose water during storage, which causes the preserved eggs to shrink and have poor taste, bad flavor, and reduced quality. By studying a degradable coating agent and applying it to preserved eggs, we explored its effect on the quality of preserved eggs during storage. In this paper, the structure and performance of gelatin film (GF), gelatin–bacterial cellulose film (GBF), and gelatin–bacterial cellulose–MgO nanocomposite film (GBMF) were explored by adding bacterial cellulose (BC) and MgO nanoparticles to gelatin. The results showed that the BC solution increased the particle size and absolute value of the zeta potential. The cross-sectional microstructure of the film showed fewer and smaller pores. The water vapor permeability (WVP) decreased, and the elongation at break (EB) increased significantly. The addition of MgO nanoparticles increased the particle size and reduced the absolute value of the zeta potential. The cross section of the film became denser and more uniform by adding MgO nanoparticles, and the surface hydrophobicity of the film increased, and the EB decreased. After coating the preserved eggs with these films, the weight loss rate, the content of total volatile base nitrogen (TVB-N), and the hardness were lower than that of uncoated preserved eggs. The pH of the uncoated preserved eggs also dropped faster than the coated preserved eggs. Moreover, the preserved egg coated with GBMF had the lowest weight loss rate and the highest sensory score. It can be seen that these three films had a certain preservation effect on preserved eggs, and the GBMF had the best preservation effect.
Collapse
|
29
|
Sanusi OM, Benelfellah A, Bikiaris DN, Aït Hocine N. Effect of rigid nanoparticles and preparation techniques on the performances of poly(lactic acid) nanocomposites: A review. POLYM ADVAN TECHNOL 2020. [DOI: 10.1002/pat.5104] [Citation(s) in RCA: 31] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Affiliation(s)
- Olawale M. Sanusi
- INSA CVL, Univ. Tours, Univ. Orléans LaMé Blois cedex France
- Department of Mechanical Engineering Federal University Oye‐Ekiti Ikole Campus Ekiti State Nigeria
| | - Abdelkibir Benelfellah
- INSA CVL, Univ. Tours, Univ. Orléans LaMé Blois cedex France
- DRII IPSA Ivry‐Sur‐Seine France
| | - Dimitrios N. Bikiaris
- Department of Chemistry, Laboratory of Polymer Chemistry and Technology Aristotle University of Technology Thessaloniki Greece
| | | |
Collapse
|
30
|
Alfei S, Marengo B, Zuccari G. Nanotechnology application in food packaging: A plethora of opportunities versus pending risks assessment and public concerns. Food Res Int 2020; 137:109664. [PMID: 33233243 DOI: 10.1016/j.foodres.2020.109664] [Citation(s) in RCA: 45] [Impact Index Per Article: 11.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/02/2020] [Revised: 08/11/2020] [Accepted: 09/06/2020] [Indexed: 02/07/2023]
Abstract
Environmental factors, oxidation and microorganisms contamination, are the major causes for food spoilage, which leads to sensory features alteration, loss of quality, production of harmful chemicals and growth of foodborne pathogens capable to cause severe illness. Synthetic preservatives, traditional conserving methods and food packaging (FP), although effective in counteracting food spoilage, do not allow the real-time monitoring of food quality during storage and transportation and assent a relatively short shelf life. In addition, FP may protect food by the spoilage caused by external contaminations, but is ineffective against foodborne microorganisms. FP preservative functionalities could be improved adding edible natural antioxidants and antimicrobials, but such chemicals are easily degradable. Nowadays, thanks to nanotechnology techniques, it is possible to improve the FP performances, formulating and inserting more stable antioxidant/antimicrobial ingredients, improving mechanical properties and introducing intelligent functions. The state-of-the-art in the field of nanomaterial-based improved FP, the advantages that might derive from their extensive introduction on the market and the main concerns associated to the possible migration and toxicity of nanomaterials, frequently neglected in existing reviews, have been herein discussed.
Collapse
Affiliation(s)
- Silvana Alfei
- Department of Pharmacy (DiFAR), University of Genoa, Genova (GE), Viale Cembrano, 4, I-16148, Italy.
| | - Barbara Marengo
- Department of Experimental Medicine - DIMES, University of Genoa, Genova (GE), Via Alberti L.B. 2, I- 16132, Italy
| | - Guendalina Zuccari
- Department of Pharmacy (DiFAR), University of Genoa, Genova (GE), Viale Cembrano, 4, I-16148, Italy
| |
Collapse
|
31
|
Investigation of Ultrasonic Treatment on Physicochemical, Structural and Morphological Properties of Sodium Alginate/AgNPs/Apple Polyphenol Films and Its Preservation Effect on Strawberry. Polymers (Basel) 2020; 12:polym12092096. [PMID: 32942637 PMCID: PMC7570076 DOI: 10.3390/polym12092096] [Citation(s) in RCA: 19] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/05/2020] [Revised: 09/06/2020] [Accepted: 09/08/2020] [Indexed: 12/19/2022] Open
Abstract
An antibacterial and anti-oxidation composite film was prepared by a casting method using sodium alginate (SA) and apple polyphenols (APPs) as the base material and glycerol as the plasticizer. Silver nanoparticles (AgNPs) were deposited by ultrasonic-assisted electrospray method. The degree of influence of the addition ratio of SA and AgNPs and different ultrasonic time on the mechanical properties, barrier properties, optical properties, and hydrophilicity of the composite film was explored. The composite films were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the SA: AgNPs ratio of 7:3 and the ultrasonic time for 30 min have the best comprehensive performance, and SA/AgNPs/APP films showed the lowest water vapor permeability value of 0.75 × 10−11 g/m·s·Pa. The composite film has good strength and softness, with tensile strength (TS) and elongation at break (E) at 23.94 MPa and 29.18%, respectively. SEM images showed that the surface of the composite film was smooth and the AgNPs’ distribution was uniform. The composite film showed broad antibacterial activity, and the antibacterial activity of Escherichia coli (92.01%) was higher than that of Staphylococcus aureus (91.26%). However, due to the addition of APP, its antioxidant activity can reach 98.39%, which has a synergistic effect on antibacterial activity. For strawberry as a model, the results showed that this composite film can prolong the shelf life of strawberries for about 8 days at 4 °C, effectively maintaining their storage quality. Compared with the commonly used PE(Polyethylene film) film on the market, it has a greater fresh-keeping effect and can be used as an active food packaging material.
Collapse
|
32
|
Istiqola A, Syafiuddin A. A review of silver nanoparticles in food packaging technologies: Regulation, methods, properties, migration, and future challenges. J CHIN CHEM SOC-TAIP 2020. [DOI: 10.1002/jccs.202000179] [Citation(s) in RCA: 29] [Impact Index Per Article: 7.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Arsi Istiqola
- Industrial Management of Service, Food and Nutrition IPB University (Bogor Agricultural University) Bogor Indonesia
| | - Achmad Syafiuddin
- Department of Public Health, Faculty of Health Universitas Nahdlatul Ulama Surabaya Surabaya Indonesia
| |
Collapse
|
33
|
Hosseinzadeh S, Partovi R, Talebi F, Babaei A. Chitosan/TiO
2
nanoparticle/
Cymbopogon citratus
essential oil film as food packaging material: Physico‐mechanical properties and its effects on microbial, chemical, and organoleptic quality of minced meat during refrigeration. J FOOD PROCESS PRES 2020. [DOI: 10.1111/jfpp.14536] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Samaneh Hosseinzadeh
- Department of Food Hygiene Faculty of Veterinary Medicine Amol University of Special Modern Technologies Amol Iran
| | - Razieh Partovi
- Department of Food Hygiene Faculty of Veterinary Medicine Amol University of Special Modern Technologies Amol Iran
| | - Fazeleh Talebi
- Department of Food Hygiene Faculty of Veterinary Medicine University of Tehran Tehran Iran
| | - Amir Babaei
- Department of Polymer Engineering Faculty of Engineering Golestan University Gorgan Iran
| |
Collapse
|
34
|
Kolodziejczyk AM, Kucinska M, Jakubowska A, Sokolowska P, Rosowski M, Tkacz‐Szczesna B, Komorowski P, Makowski K, Walkowiak B. Endothelial cell aging detection by means of atomic force spectroscopy. J Mol Recognit 2020; 33:e2853. [DOI: 10.1002/jmr.2853] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/23/2019] [Revised: 03/13/2020] [Accepted: 04/07/2020] [Indexed: 12/12/2022]
Affiliation(s)
| | | | | | - Paulina Sokolowska
- Molecular and Nanostructural Biophysics Laboratory Bionanopark Ltd Lodz Poland
- Department of Pharmacology and Toxicology Medical University of Lodz Lodz Poland
| | - Marcin Rosowski
- Molecular and Nanostructural Biophysics Laboratory Bionanopark Ltd Lodz Poland
| | | | - Piotr Komorowski
- Nanomaterial Structural Research Laboratory Bionanopark Ltd Lodz Poland
- Molecular and Nanostructural Biophysics Laboratory Bionanopark Ltd Lodz Poland
- Institute of Materials Science and Engineering Lodz University of Technology Lodz Poland
| | - Krzysztof Makowski
- Industrial Biotechnology Laboratory Bionanopark Ltd Lodz Poland
- Institute of Materials Science and Engineering Lodz University of Technology Lodz Poland
| | - Bogdan Walkowiak
- Nanomaterial Structural Research Laboratory Bionanopark Ltd Lodz Poland
- Molecular and Nanostructural Biophysics Laboratory Bionanopark Ltd Lodz Poland
- Industrial Biotechnology Laboratory Bionanopark Ltd Lodz Poland
- Institute of Materials Science and Engineering Lodz University of Technology Lodz Poland
| |
Collapse
|
35
|
Design of active electrospun mats with single and core-shell structures to achieve different curcumin release kinetics. J FOOD ENG 2020. [DOI: 10.1016/j.jfoodeng.2019.109900] [Citation(s) in RCA: 20] [Impact Index Per Article: 5.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
|
36
|
García-Arroyo P, Arrieta MP, Garcia-Garcia D, Cuervo-Rodríguez R, Fombuena V, Mancheño MJ, Segura JL. Plasticized poly(lactic acid) reinforced with antioxidant covalent organic frameworks (COFs) as novel nanofillers designed for non-migrating active packaging applications. POLYMER 2020. [DOI: 10.1016/j.polymer.2020.122466] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
37
|
Evaluation of Nanocomposite Made of Polylactic Acid and Nanocellulose from Carrot Pomace Modified with Silver Nanoparticles. Polymers (Basel) 2020; 12:polym12040812. [PMID: 32260337 PMCID: PMC7240409 DOI: 10.3390/polym12040812] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2020] [Revised: 03/30/2020] [Accepted: 04/01/2020] [Indexed: 12/30/2022] Open
Abstract
In this research, it was proposed to use carrot cellulose nanofibrils (CCNF) isolated from carrot pomace modified with silver nanoparticles (AgNPs) as a filler of polylactic acid (PLA) composites matrix. The new procedure was based on two steps: first, the preparation of nanocellulose modified with metal nanoparticles, and then the combination with PLA. Two concentrations—0.25 mM and 2 mM—of AgNO3 were used to modify CCNF. Then, PLA was mixed with the filler (CCNF/AgNPs) in two proportions 99:1 and 96:4. The influence of CCNF/AgNPs on mechanical, hydrophilic, thermal, and antibacterial properties of obtained nanocomposites was evaluated. The greatest improvement of mechanical properties was observed for composite containing CCNF with 2 mM of AgNPs, which obtained the lowest Young modulus and highest strain at break. The degradation temperature was lower for PLA with CCNF/AgNPs, but crystallization temperature wasn’t influenced. The addition of CCNF/AgNPs also increased hydrophilicity. The transmission rates of oxygen, nitrogen, and carbon dioxide also increased after the addition of CCNF/AgNPs to PLA. The antibacterial function against Escherichia coli and Bacillus cereus was obtained after the addition of AgNPs but only at the contact surface with the material made, suggesting the lack of migration of nanoparticles from the composite.
Collapse
|
38
|
Calvino C, Macke N, Kato R, Rowan SJ. Development, processing and applications of bio-sourced cellulose nanocrystal composites. Prog Polym Sci 2020. [DOI: 10.1016/j.progpolymsci.2020.101221] [Citation(s) in RCA: 57] [Impact Index Per Article: 14.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/20/2022]
|
39
|
Partovi R, Talebi F, Babaei A, Sharifzadeh A. Antimicrobial Activity of Polylactic Acid Film Incorporated With Marjoram and Clove Essential Oils on Microbial and Chemical Properties of Minced Beef During Refrigerated Storage. INTERNATIONAL JOURNAL OF ENTERIC PATHOGENS 2020. [DOI: 10.34172/ijep.2020.06] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 11/09/2022] Open
Abstract
Background: Active packaging is one of the new packaging technologies which causes interaction between packaging material and food with the aim of food shelf life extension while maintaining food safety and quality. Biodegradable films like polylactic acid (PLA) can be good alternatives to non-biodegradable plastics because of environmental pollution and concerns about the limitations of petroleum resources. Objective: This study was conducted to evaluate the efficacy of PLA film incorporated with marjoram and clove essential oils (EOs) (0.5 and 1% v/v) in maintaining the microbial and chemical quality of minced beef during refrigerated storage. Materials and Methods: Minced beef was packaged with PLA film incorporated with marjoram and clove EOs (0.5 and 1% v/v) alone and in combination and stored at refrigerator temperature for 10 days. Then, microbiological and chemical analyses were done at 0, 2, 4, 7 and 10 days of examination. Results: A reduction of 1 log CFU/g in total count was observed between groups with simultaneous use of EOs and control group (P<0.05) at day 7; however, there was not any significant difference between the mentioned groups at day 10. Active packaging with marjoram and clove EOs decreased the number of psychrotrophs in comparison to the control group and it was more evident at days 7 and 10. The number of Enterobacteriaceae in control and 1% clove EO/1% marjoram EO groups showed a difference of 3 log units at day 10. TVB-N of 1% clove EO/1% marjoram EO and 0.5% clove EO/1% marjoram EO showed significant differences from control at day 10 (P<0.05). Conclusion: The results of the current study have shown that the active PLA films can be a promising approach in order to maintain microbial and chemical quality of minced beef at refrigerator temperature for 10 days.
Collapse
Affiliation(s)
- Razieh Partovi
- Department of Food Hygiene, Faculty of Veterinary Medicine, Amol University of Special Modern Technologies, Amol, Iran
| | - Fazele Talebi
- Department of Food Hygiene, Faculty of Veterinary Medicine, University of Tehran, Tehran, Iran
| | - Amir Babaei
- Department of Polymer Engineering, Faculty of Engineering, Golestan University, Gorgan, Iran
| | - Aghil Sharifzadeh
- Department of Microbiology and Immunology, Faculty of Veterinary Medicine, University of Tehran, Tehran, Iran
- Mycology Research Center, Faculty of Veterinary Medicine, University of Tehran, Tehran, Iran
| |
Collapse
|
40
|
Mei L, Wang Q. Advances in Using Nanotechnology Structuring Approaches for Improving Food Packaging. Annu Rev Food Sci Technol 2020; 11:339-364. [PMID: 31905018 DOI: 10.1146/annurev-food-032519-051804] [Citation(s) in RCA: 30] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Abstract
Recent advances in food packaging materials largely rely on nanotechnology structuring. Owing to several unique properties of nanostructures that are lacking in their bulk forms, the incorporation of nanostructures into packaging materials has greatly improved the performance and enriched the functionalities of these materials. This review focuses on the functions and applications of widely studied nanostructures for developing novel food packaging materials. Nanostructures that offer antimicrobial activity, enhance mechanical and barrier properties, and monitor food product freshness are discussed and compared. Furthermore, the safety and potential toxicity of nanostructures in food products are evaluated by summarizing the migration activity of nanostructures to different food systems and discussing the metabolism of nanostructures at the cellular level and in animal models.
Collapse
Affiliation(s)
- Lei Mei
- Department of Nutrition and Food Science, College of Agriculture and Natural Resources, University of Maryland, College Park, Maryland 20740, USA;
| | - Qin Wang
- Department of Nutrition and Food Science, College of Agriculture and Natural Resources, University of Maryland, College Park, Maryland 20740, USA;
| |
Collapse
|
41
|
Hashim AF, Youssef K, Roberto SR, Abd-Elsalam KA. Hybrid inorganic-polymer nanocomposites: Synthesis, characterization, and plant-protection applications. MULTIFUNCTIONAL HYBRID NANOMATERIALS FOR SUSTAINABLE AGRI-FOOD AND ECOSYSTEMS 2020:33-49. [DOI: 10.1016/b978-0-12-821354-4.00003-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 09/01/2023]
|
42
|
Mohammadi G, Zangeneh MM, Zangeneh A, Haghighi ZMS. Chemical characterization and anti‐breast cancer effects of silver nanoparticles using
Phoenix dactylifera
seed ethanolic extract on 7,12‐Dimethylbenz[a] anthracene‐induced mammary gland carcinogenesis in Sprague Dawley male rats. Appl Organomet Chem 2019. [DOI: 10.1002/aoc.5136] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Affiliation(s)
- Ghobad Mohammadi
- Pharmaceutical Sciences Research Center, Health InstituteKermanshah University of Medical Sciences Kermanshah Iran
| | - Mohammad Mahdi Zangeneh
- Department of Clinical Science, Faculty of Veterinary MedicineRazi University Kermanshah Iran
- Biotechnology and Medicinal Plants Research CenterIlam University of Medical Sciences Ilam Iran
| | - Akram Zangeneh
- Department of Clinical Science, Faculty of Veterinary MedicineRazi University Kermanshah Iran
- Biotechnology and Medicinal Plants Research CenterIlam University of Medical Sciences Ilam Iran
| | | |
Collapse
|
43
|
Polylactide cellulose-based nanocomposites. Int J Biol Macromol 2019; 137:912-938. [DOI: 10.1016/j.ijbiomac.2019.06.205] [Citation(s) in RCA: 76] [Impact Index Per Article: 15.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/09/2019] [Revised: 06/19/2019] [Accepted: 06/26/2019] [Indexed: 11/17/2022]
|
44
|
Rational design of active packaging films based on polyaniline-coated polymethyl methacrylate/nanocellulose composites. Polym Bull (Berl) 2019. [DOI: 10.1007/s00289-019-02866-0] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
45
|
Inclusion complex of clove oil with chitosan/β-cyclodextrin citrate/oxidized nanocellulose biocomposite for active food packaging. Food Packag Shelf Life 2019. [DOI: 10.1016/j.fpsl.2019.100307] [Citation(s) in RCA: 54] [Impact Index Per Article: 10.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/05/2023]
|
46
|
Oun AA, Shankar S, Rhim JW. Multifunctional nanocellulose/metal and metal oxide nanoparticle hybrid nanomaterials. Crit Rev Food Sci Nutr 2019; 60:435-460. [PMID: 31131614 DOI: 10.1080/10408398.2018.1536966] [Citation(s) in RCA: 68] [Impact Index Per Article: 13.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/24/2023]
Abstract
Nanocellulose materials are derived from cellulose, the most abundant biopolymer on the earth. Nanocellulose have been extensively used in the field of food packaging materials, wastewater treatment, drug delivery, tissue engineering, hydrogels, aerogels, sensors, pharmaceuticals, and electronic sectors due to their unique chemical structure and excellent mechanical properties. On the other hand, metal and metal oxide nanoparticles (NP) such as Ag NP, ZnO NP, CuO NP, and Fe3O4 NP have a variety of functional properties such as UV-barrier, antimicrobial, and magnetic properties. Recently, nanocelluloses materials have been used as a green template for producing metal or metal oxide nanoparticles. As a result, multifunctional nanocellulose/metal or metal oxide hybrid nanomaterials with high antibacterial properties, ultraviolet barrier properties, and mechanical properties were prepared. This review emphasized recent information on the synthesis, properties, and potential applications of multifunctional nanocellulose-based hybrid nanomaterials with metal or metal oxides such as Ag NP, ZnO NP, CuO NP, and Fe3O4 NP. The nanocellulose-based hybrid nanomaterials have huge potential applications in the area of food packaging, biopharmaceuticals, biomedical, and cosmetics.
Collapse
Affiliation(s)
- Ahmed A Oun
- Food Engineering and Packaging Department, Food Technology Research Institute, Agricultural Research Center, Giza, Egypt
| | - Shiv Shankar
- Center for Humanities and Sciences, BioNanocomposite Research Center, Department of Food and Nutrition, Kyung Hee University, Seoul, Republic of Korea
| | - Jong-Whan Rhim
- Center for Humanities and Sciences, BioNanocomposite Research Center, Department of Food and Nutrition, Kyung Hee University, Seoul, Republic of Korea
| |
Collapse
|
47
|
Hossain F, Follett P, Salmieri S, Vu KD, Fraschini C, Lacroix M. Antifungal activities of combined treatments of irradiation and essential oils (EOs) encapsulated chitosan nanocomposite films in in vitro and in situ conditions. Int J Food Microbiol 2019; 295:33-40. [DOI: 10.1016/j.ijfoodmicro.2019.02.009] [Citation(s) in RCA: 44] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/10/2018] [Revised: 12/20/2018] [Accepted: 02/11/2019] [Indexed: 02/02/2023]
|
48
|
Younas M, Noreen A, Sharif A, Majeed A, Hassan A, Tabasum S, Mohammadi A, Zia KM. A review on versatile applications of blends and composites of CNC with natural and synthetic polymers with mathematical modeling. Int J Biol Macromol 2019; 124:591-626. [PMID: 30447361 DOI: 10.1016/j.ijbiomac.2018.11.064] [Citation(s) in RCA: 26] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/23/2018] [Revised: 11/04/2018] [Accepted: 11/12/2018] [Indexed: 12/20/2022]
Abstract
Cellulose is world's most abundant, renewable and recyclable polysaccharide on earth. Cellulose is composed of both amorphous and crystalline regions. Cellulose nanocrystals (CNCs) are extracted from crystalline region of cellulose. The most attractive feature of CNC is that it can be used as nanofiller to reinforce several synthetic and natural polymers. In this article, a comprehensive overview of modification of several natural and synthetic polymers using CNCs as reinforcer in respective polymer matrix is given. The immense activities of CNCs are successfully utilized to enhance the mechanical properties and to broaden the field of application of respective polymer. All the technical scientific issues have been discussed highlighting the recent advancement in biomedical and packaging field.
Collapse
Affiliation(s)
- Muhammad Younas
- Department of Mathematics, COMSATS University Islamabad, Lahore Campus, Lahore, Pakistan
| | - Aqdas Noreen
- Institute of Chemistry, Government College University, Faisalabad 38030, Pakistan
| | - Aqsa Sharif
- Institute of Chemistry, Government College University, Faisalabad 38030, Pakistan
| | - Ayesha Majeed
- Institute of Chemistry, Government College University, Faisalabad 38030, Pakistan
| | - Abida Hassan
- Institute of Chemistry, Government College University, Faisalabad 38030, Pakistan
| | - Shazia Tabasum
- Institute of Chemistry, Government College University, Faisalabad 38030, Pakistan
| | - Abbas Mohammadi
- Department of Polymer Chemistry, University of Isfahan, Isfahan, Islamic Republic of Iran
| | - Khalid Mahmood Zia
- Institute of Chemistry, Government College University, Faisalabad 38030, Pakistan.
| |
Collapse
|
49
|
Ferreira FV, Mariano M, Pinheiro IF, Cazalini EM, Souza DH, Lepesqueur LS, Koga‐Ito CY, Gouveia RF, Lona LM. Cellulose nanocrystal‐based poly(butylene adipate‐co‐terephthalate) nanocomposites covered with antimicrobial silver thin films. POLYM ENG SCI 2019. [DOI: 10.1002/pen.25066] [Citation(s) in RCA: 16] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Affiliation(s)
- Filipe V. Ferreira
- School of Chemical EngineeringUniversity of Campinas (UNICAMP) Campinas São Paulo Brazil
- Brazilian Nanotechnology National Laboratory (LNNano)Brazilian Center for Research in Energy and Materials (CNPEM) Campinas São Paulo Brazil
| | - Marcos Mariano
- Brazilian Nanotechnology National Laboratory (LNNano)Brazilian Center for Research in Energy and Materials (CNPEM) Campinas São Paulo Brazil
| | - Ivanei F. Pinheiro
- School of Chemical EngineeringUniversity of Campinas (UNICAMP) Campinas São Paulo Brazil
| | - Elisa M. Cazalini
- Department of PhysicsTechnological Institute of Aeronautics (ITA) São José dos Campos São Paulo Brazil
| | - Diego H.S. Souza
- Institute of Macromolecules Professor Eloísa Mano (IMA)Federal University of Rio de Janeiro (UFRJ) Rio de Janeiro Brazil
| | - Laura S.S. Lepesqueur
- Department of Biosciences and Oral DiagnosisInstitute of Science and Technology, São Paulo State University (UNESP) São José dos Campos São Paulo Brazil
| | - Cristiane Y. Koga‐Ito
- Department of Biosciences and Oral DiagnosisInstitute of Science and Technology, São Paulo State University (UNESP) São José dos Campos São Paulo Brazil
| | - Rubia F. Gouveia
- Brazilian Nanotechnology National Laboratory (LNNano)Brazilian Center for Research in Energy and Materials (CNPEM) Campinas São Paulo Brazil
| | - Liliane M.F. Lona
- School of Chemical EngineeringUniversity of Campinas (UNICAMP) Campinas São Paulo Brazil
| |
Collapse
|
50
|
Kostic D, Vukasinovic-Sekulic M, Armentano I, Torre L, Obradovic B. Multifunctional ternary composite films based on PLA and Ag/alginate microbeads: Physical characterization and silver release kinetics. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2019; 98:1159-1168. [PMID: 30812999 DOI: 10.1016/j.msec.2019.01.074] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/17/2018] [Revised: 12/28/2018] [Accepted: 01/16/2019] [Indexed: 01/12/2023]
Abstract
Novel multifunctional composite poly(lactic acid) (PLA) films with alginate microbeads containing silver nanoparticles (AgNPs) were developed for potential antimicrobial food packaging applications. AgNPs, 10-20 nm in size, were synthesized in a Na-alginate solution by a hydrothermal method yielding a sterile, pH neutral colloid solution of low viscosity that was electrostatically extruded to produce Ag/alginate microbeads (190 μm in size) with retained AgNPs. Dried microbeads were uniformly dispersed in PLA films with retained AgNPs as confirmed by UV-Vis spectroscopy and scanning electron microscopy. The films were characterized regarding thermal and mechanical properties as well as silver release in different food simulants. Results show that PLA matrix served as a diffusion barrier so that the released silver concentration in water after 10 days was within the prescribed limit of 0.05 mg kg-1 while the films induced inhibitory effects against Staphylococcus aureus in the agar diffusion test.
Collapse
Affiliation(s)
- Danijela Kostic
- Innovation Center of the Faculty of Technology and Metallurgy, Karnegijeva 4, Belgrade 11000, Serbia
| | - Maja Vukasinovic-Sekulic
- Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, Belgrade 11000, Serbia
| | - Ilaria Armentano
- Department of Ecological and Biological Sciences (DEB), Tuscia University, Vialedell'Università, snc, 01100 Viterbo, Italy
| | - Luigi Torre
- University of Perugia, Civil and Environmental Engineering Department, UdR INSTM, Strada di Pentima 4, 05100 Terni, (Italy)
| | - Bojana Obradovic
- Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, Belgrade 11000, Serbia.
| |
Collapse
|