Estimation of normal boiling points from group contributions

Chiral Selectivities of Permethylated α-, β-, and γ-Cyclodextrins Containing Gas Chromatographic Stationary Phases towards Ibuprofen and Its Derivatives

Ibuprofen is a well-known and broadly used, nonsteroidal anti-inflammatory and painkiller medicine. Ibuprofen is a chiral compound, and its two isomers have different biological effects, therefore, their chiral separation is necessary. Ibuprofen and its derivatives were used as model compounds to establish transportable structure chiral selectivity relationships. Chiral selectors were permethylated α-, β-, and γ-cyclodextrins containing gas chromatographic stationary phases. The chiral selectivity of ibuprofen as a free acid and its various alkyl esters (methyl, ethyl, propyl, isopropyl, butyl, isobutyl, and isoamyl esters) derivatives were tested at different temperatures. Every tested stationary phase was capable of the chiral separations of ibuprofen in its free acid form. The less strong included S optical isomers eluted before R optical isomers in every separate case. The results offer to draw transportable guidelines for the chiral selectivity vs. analyte structures. It was recognized that the S isomers of free ibuprofen acid showed an overloading phenomenon, but the R isomer did not. The results were supported by molecular modeling studies.

Melt-quenched carboxylate metal-organic framework glasses

Although carboxylate-based frameworks are commonly used architectures in metal-organic frameworks (MOFs), liquid/glass MOFs have thus far mainly been obtained from azole- or weakly coordinating ligand-based frameworks. This is because strong coordination bonds of carboxylate ligands to metals block the thermal vitrification pathways of carboxylate-based MOFs. In this study, we present the example of carboxylate-based melt-quenched MOF glasses comprising Mg2+ or Mn2+ with an aliphatic carboxylate ligand, adipate. These MOFs have a low melting temperature (Tm) of 284 °C and 238 °C, respectively, compared to zeolitic-imidazolate framework (ZIF) glasses, and superior mechanical properties in terms of hardness and elastic modulus. The low Tm may be attributed to the flexibility and low symmetry of the aliphatic carboxylate ligand, which raises the entropy of fusion (ΔSfus), and the lack of crystal field stabilization energy on metal ions, reducing enthalpy of fusion (ΔHfus). This research will serve as a cornerstone for the integration of numerous carboxylate-based MOFs into MOF glasses.

The Relationship Between Molecular Symmetry and Physicochemical Properties Involving Boiling and Melting of Organic Compounds

OBJECTIVE AND METHODS

The reliable estimation of phase transition physicochemical properties such as boiling and melting points can be valuable when designing compounds with desired physicochemical properties. This study explores the role of external rotational symmetry in determining boiling and melting points of select organic compounds. Using experimental data from the literature, the entropies of boiling and fusion were obtained for 541 compounds. The statistical significance of external rotational symmetry number on entropies of phase change was determined by using multiple linear regression. In addition, a series of aliphatic hydrocarbons, polysubstituted benzenes, and di-substituted napthalenes are used as examples to demonstrate the role of external symmetry on transition temperature.

RESULTS

The results reveal that symmetry is not well correlated with boiling point but is statistically significant in melting point.

CONCLUSION

The lack of correlation between the boiling point and the symmetry number reflects the fact that molecules have a high degree of rotational freedom in both the liquid and the vapor. On the other hand, the strong relationship between symmetry and melting point reflects the fact that molecules are rotationally restricted in the crystal but not in the liquid. Since the symmetry number is equal to the number of ways that the molecule can be properly oriented for incorporation into the crystal lattice, it is a significant determinant of the melting point.

Structure-Chiral Selectivity Relationships of Various Mandelic Acid Derivatives on Octakis 2,3-di-O-acetyl-6-O-tert-butyldimethylsilyl-gamma-cyclodextrin Containing Gas Chromatographic Stationary

Frequently, a good chiral separation is the result of long trial and error processes. The three-point interaction mechanisms require the fair geometrical fitting and functional group compatibility of the interacting groups. Structure-chiral selectivity correlations are guidelines that can be established via trough systematic studies using model compounds. The enantiorecognition of the test compounds was studied on an octakis 2,3-Di-O-acetyl-6-O-tert-butyldimethylsilyl-gamma-cyclodextrin (TBDMSDAGCD) chiral selector. In our work, mandelic acid and its variously substituted compounds were used as model compounds to establish adaptable rules for other enantiomeric pairs. The mandelic acid and its modified compounds were altered at both their carboxyl and hydroxyl positions to test the key interaction forces of the chiral recognition processes. Ring- and alkyl-substituted mandelic acid derivatives were also used in our experiments. The chiral selectivity values of 20 test compounds were measured and extrapolated to 100 °C. The hydrogen donor abilities of test compounds improved their chiral selectivities. The inclusion phenomenon also played a role in chiral recognition processes in several cases. Enantiomer elution reversals were observed for different derivatives of hydroxyl groups, providing evidence for the multimodal character of the selector. The results of our research can serve as guidelines to achieve appropriate chiral separation for other enantiomeric pairs.

A machine learning approach for thermodynamic modeling of the statically measured solubility of nilotinib hydrochloride monohydrate (anti-cancer drug) in supercritical CO2

Nilotinib hydrochloride monohydrate (NHM) is an anti-cancer drug whose solubility was statically determined in supercritical carbon dioxide (SC-CO2) for the first time at various temperatures (308-338 K) and pressures (120-270 bar). The mole fraction of the drug dissolved in SC-CO2 ranged from 0.1 × 10-5 to 0.59 × 10-5, corresponding to the solubility range of 0.016-0.094 g/L. Four sets of models were employed to evaluate the correlation of experimental data; (1) ten empirical and semi-empirical models with three to six adjustable parameters, such as Chrastil, Bartle, Sparks, Sodeifian, Mendez-Santiago and Teja (MST), Bian, Jouyban, Garlapati-Madras, Gordillo, and Jafari-Nejad; (2) Peng-Robinson equation of state (Van der Waals mixing rule, had an AARD% of 10.73); (3) expanded liquid theory (modified Wilson model, on average, the AARD of this model was 11.28%); and (4) machine learning (ML) algorithms (random forest, decision trees, multilayer perceptron, and deep neural network with respective R2 values of 0.9933, 0.9799, 0.9724 and 0.9701). All the models showed an acceptable agreement with the experimental data, among them, the Bian model exhibited excellent performance with an AARD% of 8.11. Finally, the vaporization (73.49 kJ/mol) and solvation (- 21.14 kJ/mol) enthalpies were also calculated for the first time.

A study using QSAR/QSPR models focused on the possible occurrence and risk of alloxydim residues from chlorinated drinking water, according to the EU Regulation

Any active substance with phytosanitary capacity intended to be marketed in Europe must pass exhaustive controls to assess its risk before being marketed and used in European agriculture. Since the implementation of Regulation (EC) No 1107/2009, agrochemical companies have been obliged to study the formation of pesticide transformation products (TPs) during the treatment of drinking water containing pesticide residues. However, there is no consensus on how to address this requirement. In this research work, the open literature collection on alloxydim was used to propose potential chlorination paths from alloxydim isomers. Furthermore, several QSAR/QSPR models have been used to fill the of knowledge gap relative to some key parameters in the physico-chemical, environmental and ecotoxicological areas of potential alloxydim TPs from chlorinated water for which little information exists. In this way, it has been possible to estimate the state of aggregation of these TPs (they exist mainly as liquids) as well as their ease of transit between the different phases, to predict their possible behaviour in the three environmental compartments (e.g., thermophysical properties point to a change in their evolution with respect to the parent alloxydim isomers) and to anticipate their potential risk to human and animal health (e.g., all of them cause developmental toxicity). These and other results highlight that the hazards of several TPs, i.e., both chlorinated and nonchlorinated from parent alloxydim or from those obtained after cleavage of the N - O bond and the subsequent reaction with chlorine, should be seriously considered. The obtained results reopen the debate on the implications of the use of QSAR/QSPR models for pesticide risk assessment in the legislative framework.

Wall losses of oxygenated volatile organic compounds from oxidation of toluene: Effects of chamber volume and relative humidity

Vapor wall losses can affect the yields of secondary organic aerosol. The effects of surface-to-volume (S/V) ratio and relative humidity (RH) on the vapor-wall interactions were investigated in this study. The oxygenated volatile organic compounds (OVOCs) were generated from toluene-H₂O₂ irradiations. The average gas to wall loss rate constant (k_gw) of OVOCs in a 400 L reactor (S/V = 7.5 m^-1) is 2.47 (2.41 under humid conditions) times higher than that in a 5000 L reactor (S/V = 3.6 m^-1) under dry conditions. In contrast, the average desorption rate constant (k_wg) of OVOCs in 400 L reactor is only 1.37 (1.20 under humid conditions) times higher than that in 5000 L reactor under dry conditions. It shows that increasing the S/V ratio can promote the wall losses of OVOCs. By contrast, the RH effect on k_gw is not prominent. The average k_gw value under humid conditions is almost the same as under dry conditions in the 400 L (5000 L) reactor. However, increasing RH can decrease the desorption rates. The average k_wg value under dry conditions is 1.45 (1.27) times higher than that under humid conditions in the 400 L (5000 L) reactor. The high RH can increase the partitioning equilibrium timescales and enhance the wall losses of OVOCs.

Estimation of Aromatic Secondary Organic Aerosol Using a Molecular Tracer-A Chemical Transport Model Assessment

A modified community multiscale air quality model, which can simulate the regional distributions of 2,3-dihydroxy-4-oxopentanoic acid (DHOPA), a marker species for monoaromatic secondary organic aerosol (SOA), was applied to assess the applicability of using the DHOPA to aromatic SOA mass ratio (f_SOA) from smog chamber experiments to estimate aromatic SOA during a three-week wintertime air quality campaign in urban Shanghai. The modeled daily DHOPA concentrations based on the chamber-derived mass yields agree well with the organic marker field measurements (R = 0.79; MFB = 0.152; and MFE = 0.440). Two-thirds of the DHOPA are from the oxidation of ARO1 (lumped less-reactive aromatic species; mostly toluene), with the rest from ARO2 (lumped more-reactive aromatic species; mostly xylenes). Modeled DHOPA is mainly in the particle phase under ambient organic aerosol (OA) loading but could exhibit significant gas-particle partitioning when a higher estimation of the DHOPA vapor pressure is used. The modeled f_SOA shows a strong dependence on the OA loading when only semivolatile aromatic SOA components are included in the f_SOA calculations. However, this OA dependence becomes weaker when non-volatile oligomers and dicarbonyl SOA products are considered. A constant f_SOA value of ∼0.002 is determined when all aromatic SOA components are included, which is a factor of 2 smaller than the commonly applied chamber-based f_SOA value of 0.004 for toluene. This model-derived f_SOA value does not show much spatial variation and is not sensitive to alternative estimates of DHOPA vapor pressures and SOA yields, and thus provides an appropriate scaling factor to assess aromatic SOA from DHOPA measurements. This result helps refine the quantification of SOA attributable to monoaromatic hydrocarbons in urban environments and thereby facilitates the evaluation of control measures targeting these specific precursors.

Short-chain chlorinated paraffins in soils indicate landfills as local sources in the Tibetan Plateau

Background contamination levels of contemporary persistent organic pollutants (POPs) may be elevated due to local discharges, and hence it is of high importance to assess and monitor them in alpine and Polar Regions. This study investigated the role of waste disposal in the Tibetan plateau as the local source of short-chain chlorinated paraffins (SCCPs). SCCPs were determined in soils from the urban landfill and rural dumpsites, with a concentration range of 56.8-1348 ng/g dw. The gradient descent of SCCP levels from Lhasa landfill to the surrounding soils with increasing distances suggested a significant SCCP release from waste disposal. The transport pattern was well fitted by the Boltzmann equation after normalization in terms of soil organic carbon contents. Compared to the landfill cells closed in early years, the recently closed cells contained higher concentrations but lower proportions of the short-chain congener groups, likely reflecting the SCCP use history in Tibet. In open-burning dumpsites, higher SCCP levels and dominance of lighter congener groups indicates that such crude waste treatment process might cause an extra release of volatile SCCPs. This study elucidates local SCCP inputs to the background environment, and demonstrates that both urbanization and badly-managed landfill have been contributing to the presence of contemporary POPs in the Tibetan Plateau.

Conversion of poplar biomass into high-energy density tricyclic sesquiterpene jet fuel blendstocks

Background

In an effort to ensure future energy security, reduce greenhouse gas emissions and create domestic jobs, the US has invested in technologies to develop sustainable biofuels and bioproducts from renewable carbon sources such as lignocellulosic biomass. Bio-derived jet fuel is of particular interest as aviation is less amenable to electrification compared to other modes of transportation and synthetic biology provides the ability to tailor fuel properties to enhance performance. Specific energy and energy density are important properties in determining the attractiveness of potential bio-derived jet fuels. For example, increased energy content can give the industry options such as longer range, higher load or reduced takeoff weight. Energy-dense sesquiterpenes have been identified as potential next-generation jet fuels that can be renewably produced from lignocellulosic biomass.

Results

We developed a biomass deconstruction and conversion process that enabled the production of two tricyclic sesquiterpenes, epi-isozizaene and prespatane, from the woody biomass poplar using the versatile basidiomycete Rhodosporidium toruloides. We demonstrated terpene production at both bench and bioreactor scales, with prespatane titers reaching 1173.6 mg/L when grown in poplar hydrolysate in a 2 L bioreactor. Additionally, we examined the theoretical fuel properties of prespatane and epi-isozizaene in their hydrogenated states as blending options for jet fuel, and compared them to aviation fuel, Jet A.

Conclusion

Our findings indicate that prespatane and epi-isozizaene in their hydrogenated states would be attractive blending options in Jet A or other lower density renewable jet fuels as they would improve viscosity and increase their energy density. Saturated epi-isozizaene and saturated prespatane have energy densities that are 16.6 and 18.8% higher than Jet A, respectively. These results highlight the potential of R. toruloides as a production host for the sustainable and scalable production of bio-derived jet fuel blends, and this is the first report of prespatane as an alternative jet fuel.

Indoor secondary organic aerosols: Towards an improved representation of their formation and composition in models

The formation of secondary organic aerosol (SOA) indoors is one of the many consequences of the rich and complex chemistry that occurs therein. Given particulate matter has well documented health effects, we need to understand the mechanism for SOA formation indoors and its resulting composition. This study evaluates some uncertainties that exist in quantifying gas-to-particle partitioning of SOA-forming compounds using an indoor detailed chemical model. In particular, we investigate the impacts of using different methods to estimate compound vapour pressures as well as simulating the formation of highly oxygenated organic molecules (HOM) via auto-oxidation on SOA formation indoors. Estimation of vapour pressures for 136 α-pinene oxidation species by six investigated methods led to standard deviations of 28-216%. Inclusion of HOM formation improved model performance across three of the six assessed vapour pressure estimation methods when comparing against experimental data, particularly when the NO2 concentration was relatively high. We also explored the predicted SOA composition using two product classification methods, the first assuming the molecule is dominated by one functionality according to its name, and the second accounting for the fractional weighting of each functional group within a molecule. The SOA composition was dominated by the HOM species when the NO2-to-α-terpineol ratio was high for both product classification methods, as these conditions promoted formation of the nitrate radical and hence formation of HOM monomers. As the NO2-to-α-terpineol ratio decreased, peroxides and acids dominated the simple classification, whereas for the fractional classification, carbonyl and alcohol groups became more important.

Dose-related effects of inhaled essential oils on behavioural measures of anxiety and depression and biomarkers of oxidative stress

ETHNOPHARMACOLOGICAL RELEVANCE

Essential oils (EOs) are extracts of organic, volatile metabolites of plants that are typically oily liquids at ambient temperatures. Inhalation of EOs can regulate brain health and functions associated with mood and neurodegeneration, reflecting their bioavailability to brain. The aim was to identify physicochemical properties that influenced EO volatility and pathways of brain uptake by inhalation.

MATERIALS AND METHODS

Dose-dependency of effects, determined as: total EO intake (μg/g bodyweight-BW), and rate of EO intake (μg/hr/g-BW), was determined by meta-analysis of data from animal studies (10 studies, 12 EOs), measuring effects on anxiety, depression and selected biomarkers of oxidative stress and inflammation (OSI).

RESULTS

Results demonstrated benefits on animal behavior at EO intakes of 1-100 μg/g BW and 1-10 μg/hr/g BW (Elevated Plus Maze and Forced Swimming tests) and <100 μg/g BW and 10-100 g/hr/g BW (Marble Burying). EOs regulated OSI biomarkers at intakes of 10-100 μg/g BW and 1-10 μg/h/g BW, and a dose-dependent elevation of dopamine at >1000 μg/g BW and 100-1000 μg/hr/g BW.

CONCLUSION

The results support that EO 'aromatherapy' can promote dose-dependent regulation of anxiety, depression and OSI and that efficacy requires optimization of dose.

Efficacy and safety of a novel topical agent for gallstone dissolution: 2-methoxy-6-methylpyridine

BACKGROUND

Although methyl-tertiary butyl ether (MTBE) is the only clinical topical agent for gallstone dissolution, its use is limited by its side effects mostly arising from a relatively low boiling point (55 °C). In this study, we developed the gallstone-dissolving compound containing an aromatic moiety, named 2-methoxy-6-methylpyridine (MMP) with higher boiling point (156 °C), and compared its effectiveness and toxicities with MTBE.

METHODS

The dissolubility of MTBE and MMP in vitro was determined by placing human gallstones in glass containers with either solvent and, then, measuring their dry weights. Their dissolubility in vivo was determined by comparing the weights of solvent-treated gallstones and control (dimethyl sulfoxide)-treated gallstones, after directly injecting each solvent into the gallbladder in hamster models with cholesterol and pigmented gallstones.

RESULTS

In the in vitro dissolution test, MMP demonstrated statistically higher dissolubility than did MTBE for cholesterol and pigmented gallstones (88.2% vs. 65.7%, 50.8% vs. 29.0%, respectively; P < 0.05). In the in vivo experiments, MMP exhibited 59.0% and 54.3% dissolubility for cholesterol and pigmented gallstones, respectively, which were significantly higher than those of MTBE (50.0% and 32.0%, respectively; P < 0.05). The immunohistochemical stains of gallbladder specimens obtained from the MMP-treated hamsters demonstrated that MMP did not significantly increase the expression of cleaved caspase 9 or significantly decrease the expression of proliferation cell nuclear antigen.

CONCLUSIONS

This study demonstrated that MMP has better potential than does MTBE in dissolving gallstones, especially pigmented gallstones, while resulting in lesser toxicities.

Measured Saturation Vapor Pressures of Phenolic and Nitro-aromatic Compounds

Phenolic and nitro-aromatic compounds are extremely toxic components of atmospheric aerosol that are currently not well understood. In this Article, solid and subcooled-liquid-state saturation vapor pressures of phenolic and nitro-aromatic compounds are measured using Knudsen Effusion Mass Spectrometry (KEMS) over a range of temperatures (298-318 K). Vapor pressure estimation methods, assessed in this study, do not replicate the observed dependency on the relative positions of functional groups. With a few exceptions, the estimates are biased toward predicting saturation vapor pressures that are too high, by 5-6 orders of magnitude in some cases. Basic partitioning theory comparisons indicate that overestimation of vapor pressures in such cases would cause us to expect these compounds to be present in the gas state, whereas measurements in this study suggest these phenolic and nitro-aromatic will partition into the condensed state for a wide range of ambient conditions if absorptive partitioning plays a dominant role. While these techniques might have both structural and parametric uncertainties, the new data presented here should support studies trying to ascertain the role of nitrogen containing organics on aerosol growth and human health impacts.

Modelling temperature-dependent properties of polymorphic organic molecular crystals

We present a large-scale study of the temperature-dependence of structures, free energy differences and properties of polymorphic molecular organic crystals. Lattice-vibrational Gibbs free energy differences between 475 pairs of polymorphs of organic molecular crystals have been calculated at 0 K and at their respective melting points, using a highly accurate anisotropic multipole-based force field and including thermal expansion through the use of a (negative) thermal pressure. Re-ranking of the relative thermodynamic stability of the polymorphs in each pair indicates the possibility of an enantiotropic phase transition between the crystal structures, which occurs in 21% of the studied systems. While vibrational contributions to free energies can have a significant effect on thermodynamic stability, the impact of thermal expansion on polymorph free energy differences is generally very small. We also calculate thermal expansion coefficients for the 864 crystal structures and investigate the temperature-dependence of mechanical properties, and pairwise differences in these properties between polymorphs.

Phase State and Saturation Vapor Pressure of Submicron Particles of meso-Erythritol at Ambient Conditions

meso-Erythritol is a sugar alcohol identified in atmospheric aerosol particles. In this work, evaporation of submicron-sized particles of meso-erythritol was studied in a TDMA system including a laminar flow tube under dry conditions at five temperatures (278-308 K) and ambient pressure. A complex behavior was observed and attributed to the formation of particles of three different phase states: (1) crystalline, (2) subcooled liquid or amorphous, and (3) mixed. With respect to saturation vapor pressure, the subcooled liquid and amorphous states are treated to be the same. The particle phase state was linked to initial particle size and flow tube temperature. Saturation vapor pressures of two phase states attributed to the crystalline and subcooled liquid state respectively are reported. Our results suggest a mass accommodation coefficient close to one for both states.

Toward a List of Molecules as Potential Biosignature Gases for the Search for Life on Exoplanets and Applications to Terrestrial Biochemistry

Thousands of exoplanets are known to orbit nearby stars. Plans for the next generation of space-based and ground-based telescopes are fueling the anticipation that a precious few habitable planets can be identified in the coming decade. Even more highly anticipated is the chance to find signs of life on these habitable planets by way of biosignature gases. But which gases should we search for? Although a few biosignature gases are prominent in Earth's atmospheric spectrum (O2, CH4, N2O), others have been considered as being produced at or able to accumulate to higher levels on exo-Earths (e.g., dimethyl sulfide and CH3Cl). Life on Earth produces thousands of different gases (although most in very small quantities). Some might be produced and/or accumulate in an exo-Earth atmosphere to high levels, depending on the exo-Earth ecology and surface and atmospheric chemistry. To maximize our chances of recognizing biosignature gases, we promote the concept that all stable and potentially volatile molecules should initially be considered as viable biosignature gases. We present a new approach to the subject of biosignature gases by systematically constructing lists of volatile molecules in different categories. An exhaustive list up to six non-H atoms is presented, totaling about 14,000 molecules. About 2500 of these are CNOPSH compounds. An approach for extending the list to larger molecules is described. We further show that about one-fourth of CNOPSH molecules (again, up to N = 6 non-H atoms) are known to be produced by life on Earth. The list can be used to study classes of chemicals that might be potential biosignature gases, considering their accumulation and possible false positives on exoplanets with atmospheres and surface environments different from Earth's. The list can also be used for terrestrial biochemistry applications, some examples of which are provided. We provide an online community usage database to serve as a registry for volatile molecules including biogenic compounds.

KEY WORDS

Astrobiology-Atmospheric gases-Biosignatures-Exoplanets. Astrobiology 16, 465-485.

An assessment of vapour pressure estimation methods

Laboratory measurements of vapour pressures for atmospherically relevant compounds were collated and used to assess the accuracy of vapour pressure estimates generated by seven estimation methods and impacts on predicted secondary organic aerosol. Of the vapour pressure estimation methods that were applicable to all the test set compounds, the Lee-Kesler [Reid et al., The Properties of Gases and Liquids, 1987] method showed the lowest mean absolute error and the Nannoolal et al. [Nannoonal et al., Fluid Phase Equilib., 2008, 269, 117-133] method showed the lowest mean bias error (when both used normal boiling points estimated using the Nannoolal et al. [Nannoolal et al., Fluid Phase Equilib., 2004, 226, 45-63] method). The effect of varying vapour pressure estimation methods on secondary organic aerosol (SOA) mass loading and composition was investigated using an absorptive partitioning equilibrium model. The Myrdal and Yalkowsky [Myrdal and Yalkowsky, Ind. Eng. Chem. Res., 1997, 36, 2494-2499] vapour pressure estimation method using the Nannoolal et al. [Nannoolal et al., Fluid Phase Equilib., 2004, 226, 45-63] normal boiling point gave the most accurate estimation of SOA loading despite not being the most accurate for vapour pressures alone.

Experimental determination of the partitioning coefficient of β-pinene oxidation products in SOAs

Measured particle phase concentrations of semi-volatile organic compounds exceed those predicted by absorption equilibrium gas-particle partitioning by orders of magnitude.

How accurate are physical property estimation programs for organosilicon compounds?

Organosilicon compounds are important in chemistry and commerce, and nearly 10% of new chemical substances for which premanufacture notifications are processed by the US Environmental Protection Agency (USEPA) contain silicon (Si). Yet, remarkably few measured values are submitted for key physical properties, and the accuracy of estimation programs such as the Estimation Programs Interface (EPI) Suite and the SPARC Performs Automated Reasoning in Chemistry (SPARC) system is largely unknown. To address this issue, the authors developed an extensive database of measured property values for organic compounds containing Si and evaluated the performance of no-cost estimation programs for several properties of importance in environmental assessment. These included melting point (mp), boiling point (bp), vapor pressure (vp), water solubility, n-octanol/water partition coefficient (log KOW ), and Henry's law constant. For bp and the larger of 2 vp datasets, SPARC, MPBPWIN, and the USEPA's Toxicity Estimation Software Tool (TEST) had similar accuracy. For log KOW and water solubility, the authors tested 11 and 6 no-cost estimators, respectively. The best performers were Molinspiration and WSKOWWIN, respectively. The TEST's consensus mp method outperformed that of MPBPWIN by a considerable margin. Generally, the best programs estimated the listed properties of diverse organosilicon compounds with accuracy sufficient for chemical screening. The results also highlight areas where improvement is most needed.

QSPR prediction of physico-chemical properties for REACH

For registration of a chemical, European Union REACH legislation requires information on the relevant physico-chemical properties of the chemical. Predicted property values can be used when the predictions can be shown to be valid and adequate. The relevant physico-chemical properties that are amenable to prediction are: melting/freezing point, boiling point, relative density, vapour pressure, surface tension, water solubility, n-octanol-water partition coefficient, flash point, flammability, explosive properties, self-ignition temperature, adsorption/desorption, dissociation constant, viscosity, and air-water partition coefficient (Henry's law constant). Published quantitative structure-property relationship (QSPR) methods for all of these properties are discussed, together with relevant property prediction software, as an aid for those wishing to use predicted property values in submissions to the European Chemicals Agency (ECHA).