Compositions and sorptive properties of crop residue-derived chars

A review on influence of biochar amendment on soil processes and environmental remediation

Biochar is the thermal degradation product of biomass generated in an oxygen-limited environment under different pyrolysis conditions. Biochar characteristics are functions of the feedstock material and pyrolysis temperature. Depending on pyrolysis conditions biochar concentrates varying quantities of recalcitrant and labile carbon along with nutrients which in turn affect soil physiochemical properties and microbial processes. Biochar in soil balances carbon content encourages nitrogen fixation and solubilize phosphorus along with enhancing soil enzyme activity. It serves as a microhabitat for microorganisms present in soil thus influences the diversity, composition, and distribution of soil microbial communities by affecting their intra- and interspecific communication. This review provides an overview of the current knowledge about biochar characteristics, its interactions with soil, and associated biota and its role in soil remediation. In addition, this paper also discussed the factors affecting the capacity of biochar to adsorb organic pollutants following different mechanisms. Being an effective adsorbent due its high specific surface area, large porosity, and numerous surface functional groups biochar has been explored extensively in field of environment to remediate contaminated soils.

Characterization, fractionation and untapped potential of phosphate-amended sewage sludge biochar in soil-plant systems

Sewage sludge, a byproduct of wastewater treatment, poses serious environmental and health risks due to its content of organic contaminants, heavy metals, and pathogenic microorganisms. With the growing global production of municipal wastewater, finding effective methods for managing and disposing of sewage sludge has become increasingly urgent. Traditional methods such as land disposal, dumping, and incineration have limitations and environmental drawbacks. However, recent advancements have shown promise in the valorization of sewage sludge, particularly through pyrolysis, which converts it into biochar for use in soil amendment and pollutant mitigation. This study aims to characterize and fractionate phosphate-amended sewage sludge biochar produced at 300 °C, 400 °C, and 500 °C, and to evaluate its potential use in soil-plant systems. It examines nutrient bioavailability in soil after the addition of this biochar and its effects on plant growth. The pyrolysis process resulted in biochar with high alkalinity (7.2-11.1), ash content ranging from 56.9% to 87.3%, and significant phosphorus retention, with phosphorus concentrations increasing with pyrolysis temperature (5.35%-9.38%). Phosphorus fractionation showed a shift toward more stable fractions particularly at 500 °C. Soil incubation experiments indicated increased phosphorus availability with HCl-extractable P showing a high extraction efficiency of up to 94.95%. In plant growth experiments, the amended biochar significantly enhanced growth, with corn showing an increase of up to 28.8% and wheat showing an increase of up to 86% compared to the control in the first four weeks after emergence. These findings indicate that phosphate-amended sewage sludge biochar enhances nutrient availability and supports plant growth, providing a sustainable solution for sewage sludge management, contributing to soil improvement and carbon sequestration, thereby addressing global environmental challenges.

Molecular characteristics of organic matter derived from sulfonated biochar

Sulfonated biochar (SBC), as a functional carbon-based material, has attracted widespread attention due to its excellent adsorption properties. The composition of biochar-derived organic matter (B-DOM) is a key factor influencing the migration and transformation of soil elements and pollutants. However, molecular characteristics of sulfonated biochar-derived organic matter (SBC-DOM) are still unclear. In this study, the molecular composition of derived organic matter (DOM) from SBC prepared via one-step carbonization-sulfonation techniques was investigated by Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) and then compared with those of DOMs from rice husk (RH), pyrochar (PYC), and hydrochar (HYC). The results show that the CHOS- and CHONS-containing formulae are predominant in SBC-DOM, accounting for 85% of the total molecular formula number, while DOMs from RH, PYC, and HYC are dominated by CHO-containing formulae. Compared to PYC-DOM and HYC-DOM, SBC-DOM has more unsaturated aliphatic compounds, which make it more labile and easily biodegraded. Additionally, SBC-DOM has higher O/C, (N + O)/C ratios and sulfur-containing compounds. These findings provide a theoretical basis for further research on the application of sulfonated biochar in soil improvement and remediation.

PFOA-contaminated soil remediation: a comprehensive review

Soil and groundwater contamination has been raised as a concern due to the capability of posing a risk to human health and ecology, especially in facing highly toxic and emerging pollutants. Because of the prevalent usage of perfluorooctanoic acid (PFOA), in industrial and production processes, and subsequently the extent of sites contaminated with these pollutants, cleaning up PFOA polluted sites is paramount. This research provides a review of remediation approaches that have been used, and nine remediation techniques were reviewed under physical, chemical, and biological approaches categorization. As the pollutant specifications, environmental implications, and adverse ecological effects of remediation procedures should be considered in the analysis and evaluation of remediation approaches, unlike previous research that considered a couple of PFAS pollutants and generally dealt with technical issues, in this study, the benefits, drawbacks, and possible environmental and ecological adverse effects of PFOA-contaminated site remediation also were discussed. In the end, in addition to providing sufficient and applicable understanding by comprehensively considering all aspects and field-scale challenges and obstacles, knowledge gaps have been found and discussed.

Sorption characteristics of phosphorus on marine sediments in the presence of black carbon derived from fly ash

The sorption behavior of phosphorus on marine sediments in the presence of black carbon derived from fly ash (FC) was studied. For both the FC and sediment samples, the kinetic curves could be described by a two-compartment first order equation, and the isotherms fit the Freundlich and Langmuir models well. The high specific surface area with abundant acidic functional groups of FC promoted the sorption and make this process more irreversible. The effects were more significant with higher amount of FC added. After sorption, more significant increase in Ex-P, Fe/Al-P and CaP was found in the sediment with FC added, while the organic groups in FC rarely react with phosphorus to form OP. The pH of medium influenced the sorption character, and FC promoted the process significantly at pH < pHPZNPC. The sorption was endothermic with an increase in randomness. The presence of FC had little effects on the thermodynamic parameters.

Imidacloprid removal by modified graphitic biochar with Fe/Zn bimetallic oxides

Coping with the critical challenge of imidacloprid (IMI) contamination in sewage treatment and farmland drainage purification, this study presents a pioneering development of an advanced modified graphitic white melon seed shells biochar (Fe/Zn@WBC). The Fe/Zn@WBC demonstrates a substantial enhancement in adsorption efficiency for IMI, achieving a remarkable removal rate of 87.69% within 30 min and a significantly higher initial adsorption rate parameter h = 4.176 mg g-1·min-1. This significant improvement outperforms WBC (12.22%, h = 0.115 mg g-1·min-1) and highlights the influence of optimized adsorption conditions at 900 °C and the graphitization degree resulting from Fe/Zn bimetallic oxide modification. Characterization analysis and batch sorption experiments including kinetics, isotherms, thermodynamics and pH factors illustrate that chemical adsorption is the main type of adsorption mechanism responsible for this superior ability to remove IMI through pore filling, hydrogen bonding, hydrophobic interaction, electrostatics interaction, π-π interactions as well as complexation processes. Furthermore, we demonstrate exceptional stability of Fe/Zn@WBC across a broad pH range (pH = 3-11), co-existing ions presence along with humic acid under various real water conditions while maintaining high removal efficiency. This study presents an advanced biochar adsorbent, Fe/Zn@WBC, with efficient adsorption capacity and easy preparation. Through three regeneration cycles via pyrolysis method, it demonstrates excellent pyrolysis regeneration capabilities with an average removal efficiency of 92.02%. The magnetic properties enable rapid separation facilitated by magnetic analysis. By elucidating the efficacy and mechanistic foundations of Fe/Zn@WBC, this research significantly contributes to the field of environmental remediation by providing a scalable solution for IMI removal and enhancing scientific understanding of bimetallic oxides-hydrophilic organic pollutant interactions.

Alteration of soil pH induced by submerging/drainage and application of peanut straw biochar and its impact on Cd(II) availability in an acidic soil to indica-japonica rice varieties

The effects of soil pH variations induced by submergence/drainage and biochar application on soil cadmium (Cd) availability to different rice (Oryza sativa L.) varieties are not well understood. This study aims to investigate the possible reasons for available Cd(II) reduction in paddy soil as influenced by biochar and to determine Cd(II) absorption and translocation rates in different parts of various rice varieties. A pot experiment in a greenhouse using four japonica and four indica rice varieties was conducted in Cd(II) contaminated paddy soil with peanut straw biochar. The results indicated that the submerging led to an increase in soil pH due to the consumption of protons (H+) by the reduction reactions of iron/manganese (Fe/Mn) oxides and sulfate (SO42-) and thus the decrease in soil available Cd(II) contents. However, the drainage decreased soil pH due to the release of protons during the oxidation of Fe2+, Mn2+, and S2- and thus the increase in soil available Cd(II) contents. Application of the biochar increased soil pH during soil submerging and inhibited the decline in soil pH during soil drainage, and thus decreased soil available Cd(II) contents under both submerging and drainage conditions. The indica rice varieties absorbed more Cd(II) in their roots and accumulated higher amounts of Cd(II) in their shoots and grains than the japonica rice varieties. The Cd(II) sensitive varieties exhibited a greater absorption and translocation rate of Cd(II) compared to the tolerant varieties of both indica and japonica rice. Biochar inhibited the absorption and accumulation of Cd(II) in the rice varieties, which ultimately lowered the Cd(II) contents in rice grains below the national food safety limit (0.2 mg kg-1). Overall, planting japonica rice varieties in Cd(II) polluted paddy soils combined with the use of biochar can effectively reduce Cd(II) content in rice grains which protects human health against Cd(II) toxicity.

A Novel Low-Density-Biomass-Carbon Composite Coated with Carpet-like and Dandelion-Shaped Rare-Earth-Doped Cobalt Ferrite for Enhanced Microwave Absorption

A novel low-density composite for the absorption of microwaves was prepared by loading La-doped spinel cobalt ferrite (La-CFO) onto biomass carbon (BC) derived from corn stalks using a hydrothermal method. This composite (La-CFO@BC) not only maintained the advantageous properties of low density and abundant porosity, but also exhibited a unique morphology, with La-CFO displaying a carpet-like structure interspersed with dandelion-shaped particles. The incorporation of La-CFO effectively tuned the electromagnetic parameters of the composite, thereby improving its impedance-matching attributes and its ability to absorb microwave radiation. At a frequency of 12.8 GHz for electromagnetic waves and with a thickness of 2.5 mm, La-CFO@BC demonstrated remarkable performance in microwave absorption, attaining a noteworthy minimum reflection (RLmin) of -53.2 dB and an effective absorption bandwidth (EAB) of 6.4 GHz. Furthermore, by varying the thickness of the La-CFO@BC within the range of 1.0 to 5.5 mm, the EAB could be broadened to 13.8 GHz, covering the entire X-band, the entire Ku-band, and a substantial portion of the C-band. This study demonstrated that La-CFO@BC was a promising alternative for electromagnetic wave attenuation, which offered superior performance in microwave absorption.

A Review of Remediation Strategies for Diphenyl Ether Herbicide Contamination

In agriculture, diphenyl ether herbicides are a broad-spectrum family of pesticides mainly used to control annual weeds in agriculture. Although diphenyl ether herbicides have a long-lasting effect in weed control, they can also be harmful to succeeding crops, as well as to the water and soil environment. Residual herbicides can also harm a large number of non-target organisms, leading to the death of pest predators and other beneficial organisms. Therefore, it is of great significance to control and remediate the contamination caused by diphenyl ether herbicide residues for the sake of environmental, nutritional, and biological safety. This review provides an overview of the techniques used for remediating diphenyl ether herbicide contamination, including biological, physical, and chemical remediation. Among these techniques, bioremediation, particularly microbial biodegradation technology, is extensively employed. The mechanisms and influencing factors of different remediation techniques in eliminating diphenyl ether herbicide contamination are discussed, together with a prospect for future development directions. This review serves as a scientific reference for the efficient remediation of residual contamination from diphenyl ether herbicides.

A review on photocatalytic attribution and process of pyrolytic biochar in environment

Biochar has attracted significant attention due to its excellent environmental benefits and extensive applications. Recently, a consensus has been accepted that biochar can act as a photocatalyst and trigger effective photocatalytic reactions in the environment, which is important to energy conversion and the cycle of elements. However, its photocatalytic processes and the corresponding environmental impacts need to receive more and due attention. In this review, we provide a comprehensive summary of the underlying correlations among the pyrolytic evolution of biomass, the structure characteristic of biochar, and the resultant photocatalytic performance. Moreover, the photocatalytic processes and the influence of environmental factors were elaborately investigated on biochar. Finally, future tendencies and challenges in the photocatalysis of biochar have been prospected in the environmental field. This review has offered innovative insights into the photocatalytic essential of biochar and highly enhanced the understanding of its environmental impact.

Biochar from phytoremediation plant residues: a review of its characteristics and potential applications

Phytoremediation is a cost-effective and eco-friendly plant-based approach promising technique to repair heavy metal-contaminated soils. However, a significant quantity of plant residues needs to be properly treated and utilized. Pyrolysis is an effective technology for converting residues to biochar, which can solve the problem and avoid secondary contamination. This paper reviews the generation, and physicochemical properties of biochar from phytoremediation residues, and its application in soil improvement, environmental remediation, and carbon sequestration. In spite of this, it is important to be aware of the potential toxicity of heavy metals in biochar and the environmental risks of biochar before applying it to practical applications. Future challenges in the production and application of residue-derived biochar include the rational selection of pyrolysis parameters and proper handling of potentially hazardous components in the biochar.

Efficient Adsorption of Nitrogen and Phosphorus in Wastewater by Biochar

Nitrogen and phosphorus play essential roles in ecosystems and organisms. However, with the development of industry and agriculture in recent years, excessive N and P have flowed into water bodies, leading to eutrophication, algal proliferation, and red tides, which are harmful to aquatic organisms. Biochar has a high specific surface area, abundant functional groups, and porous structure, which can effectively adsorb nitrogen and phosphorus in water, thus reducing environmental pollution, achieving the reusability of elements. This article provides an overview of the preparation of biochar, modification methods of biochar, advancements in the adsorption of nitrogen and phosphorus by biochar, factors influencing the adsorption of nitrogen and phosphorus in water by biochar, as well as reusability and adsorption mechanisms. Furthermore, the difficulties encountered and future research directions regarding the adsorption of nitrogen and phosphorus by biochar were proposed, providing references for the future application of biochar in nitrogen and phosphorus adsorption.

Adsorption of acetochlor-contaminated water systems using novel P-doped biochar: Effects, application, and mechanism

Given the serious threat of acetochlor (ACT) to the aquatic ecological environment, designing wastewater treatment-oriented adsorbents for the sustainable remediation of actual ACT-contaminated water is a promising yet challenging strategy. Herein, a novel P-doped biochar (PBC-800) with a high adsorption capacity (51.34 mg g-1) and a rapid reaction rate (47.35 mg g-1 h-1) for ACT was prepared through pyrolyzing of rice straw biomass pre-impregnated with potassium dihydrogen phosphate (KH2PO4). Additionally, P-doped biochars synthesized at different pyrolysis temperatures exhibited significant variations in ACT adsorption performance, which was mainly ascribed to the distinction between hydrophilicity and sp2 conjugate C (ID/IG = 0.84-1.08). The adsorption behavior of ACT on PBC-800 followed the Elovich kinetics and Freundlich adsorption isotherm models. Thermodynamic calculations indicated that the adsorption of ACT by PBC-800 was a spontaneously disordered decreasing exothermic process. Besides, PBC-800 exhibited a powerful anti-interference for ACT adsorption within complex water matrices, highlighting its potential for various of practical applications. Through characterization analysis and further experiments, it was proved that the excellent adsorption performance of PBC-800 on ACT was ascribed to a combination of physical and chemical adsorption mechanisms, including 57.5% pore filling, 23.4% hydrophobic interaction, 12.7% π-π interaction, and 6.4% hydrogen bonding. Moreover, PBC-800 exerted a prominent adhesion impact upon Gram-positive and negative bacteria at 3 h. This study offers a new idea for the utilization of agricultural residues and provides insights into the mechanism of ACT adsorption through its derived biochar.

Multitask Deep Learning Enabling a Synergy for Cadmium and Methane Mitigation with Biochar Amendments in Paddy Soils

Biochar has demonstrated significant promise in addressing heavy metal contamination and methane (CH4) emissions in paddy soils; however, achieving a synergy between these two goals is challenging due to various variables, including the characteristics of biochar and soil properties that influence biochar's performance. Here, we successfully developed an interpretable multitask deep learning (MTDL) model by employing a tensor tracking paradigm to facilitate parameter sharing between two separate data sets, enabling a synergy between Cd and CH4 mitigation with biochar amendments. The characteristics of biochar contribute similar weightings of 67.9% and 62.5% to Cd and CH4 mitigation, respectively, but their relative importance in determining biochar's performance varies significantly. Notably, this MTDL model excels in custom-tailoring biochar to synergistically mitigate Cd and CH4 in paddy soils across a wide geographic range, surpassing traditional machine learning models. Our findings deepen our understanding of the interactive effects of Cd and CH4 mitigation with biochar amendments in paddy soils, and they also potentially extend the application of artificial intelligence in sustainable environmental remediation, especially when dealing with multiple objectives.

Mechanistic and Kinetic Consideration of the Photochemically Generated Oxidative Organic Radicals in Dissolved Black Carbon Solutions under Simulated Solar Irradiation

The photochemically generated oxidative organic radicals (POORs) in dissolved black carbon (DBC) was investigated and compared with that in dissolved organic matter (DOM). POORs generated in DBC solutions exhibited higher one-electron reduction potential values (1.38-1.56 V) than those in DOM solutions (1.22-1.38 V). We found that the photogeneration of POORs from DBC is enhanced with dissolved oxygen (DO) increasing, while the inhibition of POORs is observed in reference to DOM solution. The behavior of the one-electron reducing species (DBC•-/DOM•-) was employed to explain this phenomenon. The experimental results revealed that the DO concentration had a greater effect on DBC•- than on DOM•-. Low DO levels led to a substantial increase in the steady-state concentration of DBC•-, which quenched the POORs via back-electron reactions. Moreover, the contribution of POORs to the degradation of 19 emerging organic contaminants (EOCs) in sunlight-exposed DBC and DOM solutions was estimated. The findings indicate that POORs play an important role in the photodegradation of EOCs previously known to react with triplets, especially in DBC solutions. Compared to DOM solutions, POOR exhibits a lower but considerable contribution to EOC attenuation. This study enhances the understanding of pollutant fate in aquatic environments by highlighting the role of DBC in photochemical pollutant degradation and providing insights into pollutant transformation mechanisms involving POORs.

Effect of different production methods on physicochemical properties and adsorption capacities of biochar from sewage sludge and kitchen waste: Mechanism and correlation analysis

Different pyrolysis methods, parameters and feedstocks result in biochars with different properties, structures and removal capacities for heavy metals. However, the role of each property on adsorption capacity and corresponding causal relationships remain unclear. Here, we investigated various physicochemical properties of biochar produced via three different methods and two different feedstocks to clarify influences of biomass sources and pyrolysis processes on biochar properties and its heavy metal adsorption performance. Experimental results showed biochars were more aromatic and contained more functional groups after hydrothermal carbonization, while they had developed pores and higher surface areas produced by anaerobic pyrolysis. The inclusion of oxygen resulted in more complete carbonization and higher CEC biochar. Different biochar properties resulted in different adsorption capacities. Biochar produced by aerobic calcination showed higher adsorption efficiency for Cu and Pb. Correlation analysis proved that pH, cation exchange capacity and degree of carbonization positively affected adsorption, while organic matter content and aromaticity were unfavorable for adsorption. Microstructure and components determined biochar macroscopic properties and ultimate adsorption efficiency for metal ions. This study identifies the degree of correlation and pathways of each property on adsorption, which provides guidance for targeted modification of biochar to enhance its performance in heavy metal removal.

Iopamidol Abatement from Waters: A Rigorous Approach to Determine Physicochemical Parameters Needed to Scale Up from Batch to Continuous Operation

The abatement of iopamidol (IPM), an X-ray iodinated contrast agent, in aqueous solution using powdered activated carbon (PAC) as a sorbent was investigated in the present work. The material was characterized by various analytical techniques such as thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller analysis, dynamic light scattering, and zeta potential measurements. Both thermodynamic and kinetic experiments were conducted in a batch apparatus, and the effects of the initial concentration of IPM, the temperature, and the adsorbent bulk density on the adsorption kinetics were investigated. The adsorption isotherms were interpreted well using the Langmuir model. Moreover, it was demonstrated that IPM adsorption on PAC is spontaneous and exothermic (ΔH0 = -27 kJ mol-1). The adsorption kinetic data were described using a dynamic intraparticle model for fluid-solid adsorption kinetics (ADIM) allowing determination of a surface activation energy Es = 6 ± 1 kJ mol-1. Comparing the experimental results and the model predictions, a good model fit was obtained.

Densified biochar capsules as an alternative to conventional seedings

The application of biochar in soil provides various benefits that can vary in intensity as the pyrolysis temperature increases. However, its low density makes this material easily transportable and prone to being removed from the system. The objective of this study was to investigate the pyrolysis temperatures and compression pressure of densified biochar carrier capsules on the physiological quality of Schizolobium parahyba var. amazonicum seeds. Produced at three final pyrolysis temperatures (300, 600, and 900 °C), the biochar was characterized through bulk and true density analyses, immediate composition, pH, electrical conductivity, cation exchange capacity, water-soluble carbon, characterization of organic structures by FTIR, and PAH analysis. Subsequently, the biochar was compacted by briquetting at two compression pressures (50 and 200 psi) with one seed per capsule, and germination, emergence, and quality of generated seedlings were evaluated. After verifying residue normality and variance homogeneity, analysis of variance was conducted following a completely randomized design in a 3 × 2 factorial arrangement, with four replications per treatment and two additional control treatments. Upon identifying significant differences, regression model adjustments were performed. Cluster-based multivariate analysis was used to identify similarities among the studied treatments, both for capsules and controls. Pyrolysis temperature and compression pressure influenced seed germination, emergence, and initial seedling growth. Lower pressure favored shoot development, while higher pressure favored root development and generated seedlings of higher quality. The benefits of biochar to soil, combined with the implementation of seeds, make the production of densified biochar capsules an alternative to conventional seedings, potentially reducing high energy and financial costs and enabling the recovery of degraded areas, even in difficult-to-access regions.

Conversion of solid wastes and natural biomass for deciphering the valorization of biochar in pollution abatement: A review on the thermo-chemical processes

This overview addresses the formation of solid trash and the various forms of waste from a variety of industries, which environmentalists have embraced. The paper investigates the negative effects on the environment caused by unsustainable management of municipal solid trash as well as the opportunities presented by the formal system. This examination looks at the origins of solid waste as well as the typical treatment methods. Pyrolysis methods, feedstock pyrolysis, and lignocellulosic biomass pyrolysis were highlighted. Explain in detail the various thermochemical processes that take place during the pyrolysis of biomass. Due to its carbon content, low cost, accessibility, ubiquitousness, renewable nature, and environmental friendliness, biomass waste is a unique biochar precursor. This study looks at the different types of biomass waste that are available for treating wastewater. This study discussed a wide variety of reactors. Adsorption is the standard method that is used the most frequently to remove hazardous organic, dye, and inorganic pollutants from wastewater. These pollutants cause damage to the environment and water supplies, thus it is important to remove them. Adsorption is both simple and inexpensive to utilize. Temperature-dependent conversions explain the kinetic theories of biomaterial biochemical degradation. This article presents a review that explains how pyrolytic breakdown char materials can be used to reduce pollution and improve environmental management.

Reviewing the role of biochar in paddy soils: An agricultural and environmental perspective

The main challenge of the twenty-first century is to find a balance between environmental sustainability and crop productivity in a world with a rapidly growing population. Soil health is the backbone of a resilient environment and stable food production systems. In recent years, the use of biochar to bind nutrients, sorption of pollutants, and increase crop productivity has gained popularity. This article reviews key recent studies on the environmental impacts of biochar and the benefits of its unique physicochemical features in paddy soils. This review provides critical information on the role of biochar properties on environmental pollutants, carbon and nitrogen cycling, plant growth regulation, and microbial activities. Biochar improves the soil properties of paddy soils through increasing microbial activities and nutrient availability, accelerating carbon and nitrogen cycle, and reducing the availability of heavy metals and micropollutants. For example, a study showed that the application of a maximum of 40 t ha-1 of biochar from rice husks prior to cultivation (at high temperature and slow pyrolysis) increases nutrient utilization and rice grain yield by 40%. Biochar can be used to minimize the use of chemical fertilizers to ensure sustainable food production.

Potential of biochar for hydrocarbon degradation of crude oil-contaminated soils

A greenhouse experiment was conducted to assess the effect of phytoremediation and biochar application on hydrocarbon degradation in crude oil-contaminated soils. The experiment consisted of four levels of biochar application (0, 5, 10, and 15 t/ha) and the presence or absence of Vigna unguiculata (cowpea; +C, -C) replicated thrice and arranged in a 4 × 2 × 3 factorial completely randomized design. Samples were taken on days 0, 30, and 60 for total petroleum hydrocarbon (TPH) analysis. A significantly higher TPH degradation efficiency of 69.2% (7033 mg/kg) was observed in contaminated soils amended with 15 t/ha biochar only after 60 days of incubation. Highly significant interactions were observed between biochar × plant (p < 0.001) and biochar × days (p = 0.0073). Biochar also improved the growth of plants in contaminated soils, with the highest height of 23.50 cm and stem girth of 2.10 cm obtained when plants were amended with 15 t/ha biochar at 6 weeks after planting. The potential of biochar to increase the degradation efficiency of hydrocarbons should be explored in the long run for the cleanup of crude oil-contaminated soils.

H2O2 activation and contaminants removal in heterogeneous Fenton-like systems

Emerging contaminants can be removed effectively in heterogeneous Fenton-like systems. Currently, catalyst activity and contaminant removal mechanisms have been studied extensively in Fenton-like systems. However, a systematic summary was lacking. This review summarized: 1) The effects of various heterogeneous catalysts on emerging contaminants degradation by activating H₂O₂; 2) The role of active sites in different catalysts during the activation of H₂O₂ and their contribution to the generation of active species; 3) The modulation of degradation pathways of emerging contaminants. This paper will help scholars to advance the controlled construction of active sites in heterogeneous Fenton-like systems. Suitable heterogeneous Fenton catalysts can be selected in practical water treatment processes.

Removal of NO at low concentration from air in urban built environments by activated miscanthus biochar

This work presents an innovative and sustainable approach to remove NO emissions from urban ambient air in confined areas (underground parking areas or tunnels) using low-cost activated carbons obtained from Miscanthus biochar (MSP700) by physical activation (with CO₂ or steam) at temperatures ranging from 800 to 900 °C. The NO removal capacity of the activated biochars was evaluated under different conditions (temperature, humidity and oxygen concentration) and compared against a commercial activated carbon. This last material showed a clear dependence on oxygen concentration and temperature, exhibiting a maximum capacity of 72.6% in air at 20 °C, whilst, its capacity notably decreased at higher temperatures, revealing that physical NO adsorption is the limiting step for the commercial sample that presents limited oxygen surface functionalities. In contrast, MSP700-activated biochars reached nearly complete NO removal (99.9%) at all tested temperatures in air ambient. Those MSP700-derived carbons only required low oxygen concentration (4 vol%) in the gas stream to achieve the full NO removal at 20 °C. Moreover, they also showed an excellent performance in the presence of H₂O, reaching NO removal higher than 96%. This remarkable activity results from the abundance of basic oxygenated surface groups, which act as active sites for NO/O₂ adsorption, along with the presence of a homogeneous microporosity of 6 Å, which enables intimate contact between NO and O₂. These features promote the oxidation of NO to NO₂, which is further retained over the carbon surface. Therefore, the activated biochars studied here could be considered promising materials for the efficient removal of NO at low concentrations from air at moderate temperatures, thus closely approaching real-life conditions in confined spaces.

Structural characteristics of dissolved black carbon and its interactions with organic and inorganic contaminants: A critical review

Biochar (BC) is a sustainable and renewable carbonaceous material, and its soluble component, dissolved black carbon (DBC), is the key to understanding BC's geological and environmental processes. Although the relationship between the changes in DBC structure and its properties, functions, and associated environmental risks has been explored, a gap remains in our understanding of DBC's fate and behavior in the natural environment. Thus, in this review, we have highlighted the molecular and chemical compositions and the structural evolution of DBC during pyrolysis, the influence of DBC's physicochemical properties on its fate and transport, DBC's interaction with soil and its contaminants, and DBC stability in soil and water environments along with potential risks. Based on our in-depth assessment of DBC and its biogeochemical roles, we believe that future studies should focus on the following: (1) using advanced techniques to understand the chemical and molecular structure of DBC deeply and concisely and, thus, determine its fundamental role in the natural environment; (2) investigating the multi-functional properties of DBC and its interaction mechanisms; and (3) evaluating the environmental behaviors of and risks associated with DBC after BC application. In future, it is necessary to gain a deeper insight into the fate and transport of DBC with contaminants and study its associated risks under BC application in the environment.

Novel hydrophilic straw biochar for the adsorption of neonicotinoids: kinetics, thermodynamics, influencing factors, and reuse performance

Nitenpyram (NIT) is the most water-soluble neonicotinoid (NEO). It has been shown to pose a serious threat to human health and the environment but was always ignored due to its limited market share. There were few experts who studied NIT's transport behavior on biochar. In this study, two types of biochar were co-activated separately using zinc chloride combined with phosphoric acid and potassium hydroxide combined with acetic acid, marked as ZBC and KBC. Characterizations suggested that hydrophilic ZBC and KBC had more surface functional groups than unmodified biochar (BC), and specific surface areas of ZBC (456.406 m²·g^-1) and KBC (750.588 m²·g^-1) were significantly higher than of BC (67.181 m²·g^-1). The pore structures of KBC and ZBC were hierarchical porous structures with different pore sizes and typical microporous structure, respectively. The adsorption performance of either NIT or IMI on KBC was better than that on ZBC. Only 0.4 g·L^-1 of KBC can absorb 89.62% of NIT in just 5 min. The equilibrium adsorption amounts of NIT on ZBC and KBC were 17.995 mg·g^-1 and 82.910 mg·g^-1. Elovich and Langmuir models were used to evaluate the whole adsorption process, which was attributed to the chemisorption mechanism. In addition, removal rates of NIT were negatively correlated to NIT's initial concentration and positively correlated to the dose of biochar. pH had almost no effect on adsorption, but the presence of salt ions can inhibit the removal of NIT. Long-term stabilities of biochars were also acceptable. These findings will promote the development in the preparation of biochar fields and provide a positive reference value for NEO removal.

Pyrolysis Atmospheres and Temperatures Co-Mediated Spectral Variations of Biochar-Derived Dissolved Organic Carbon: Quantitative Prediction and Self-Organizing Maps Analysis

Biochar-derived dissolved organic carbon (BDOC), as a highly activated carbonaceous fraction of biochar, significantly affects the environmental effect of biochar. This study systematically investigated the differences in the properties of BDOC produced at 300-750 °C in three atmosphere types (including N₂ and CO₂ flows and air limitation) as well as their quantitative relationship with biochar properties. The results showed that BDOC in biochar pyrolyzed in air limitation (0.19-2.88 mg/g) was more than that pyrolyzed in N₂ (0.06-1.63 mg/g) and CO₂ flows (0.07-1.74 mg/g) at 450-750 °C. The aliphaticity, humification, molecular weight, and polarity of BDOC strongly depended on the atmosphere types as well as the pyrolysis temperatures. BDOC produced in air limitation contained more humic-like substances (0.65-0.89) and less fulvic-like substances (0.11-0.35) than that produced in N₂ and CO₂ flows. The multiple linear regression of the exponential form of biochar properties (H and O contents, H/C and (O+N)/C) could be used to quantitatively predict the bulk content and organic component contents of BDOC. Additionally, self-organizing maps could effectively visualize the categories of fluorescence intensity and components of BDOC from different pyrolysis atmospheres and temperatures. This study highlights that pyrolysis atmosphere types are a crucial factor controlling the BDOC properties, and some characteristics of BDOC can be quantitatively evaluated based on the properties of biochar.

Biochar for the Removal of Emerging Pollutants from Aquatic Systems: A Review

Water contaminated with emerging pollutants has become a serious environmental issue globally. Biochar is a porous and carbon-rich material produced from biomass pyrolysis and has the potential to be used as an integrated adsorptive material. Many studies have shown that biochar is capable to adsorb emerging pollutants from aquatic systems and could be used to solve the water pollution problem. Here, we provided a dual perspective on removing emerging pollutants from aquatic systems using biochar and analyzed the emerging pollutant removal efficiency from the aspects of biochar types, pollutant types and coexistence with heavy metals, as well as the associated mechanisms. The potential risks and future research directions of biochar utilization are also presented. This review aims to assist researchers interested in using biochar for emerging pollutants remediation in aquatic systems and facilitate research on emerging pollutants removal, thereby reducing their environmental risk.

Evaluation of the use of biochar to stabilize polycyclic aromatic hydrocarbons and phthalates in sediment

Three types of biochar (BC) (mulberry biochar (MB), wheat straw biochar, and pine tree sawdust biochar) were prepared and used to stabilize hydrophobic organic compounds (HOCs) in contaminated sediment. The kinetics of HOC adsorption to the BCs had two distinct stages. The second stage adsorption process was longer for MB than the other BCs, presumably because MB contained large pores, mesopores, and micropores. The adsorption isotherms for the three BCs were described well by the Freundlich model. The adsorption capacities of MB, WS and PT for HOCs ranged between 106.7 and 1202 μg/g, 135.1 and 1002 μg/g, and 255.6 and 909 μg/g, respectively. The apparent HOC adsorption coefficients (K_BC-w) for the three BCs were determined from the isotherm data and were similar. The HOC logK_OW values correlated well with the logK_BC-w values. In sediment slurry experiments, HOCs were much more effectively stabilized by MB than wheat straw and pine tree sawdust biochar. This was probably because of the MB pore characteristics that favored adsorption of HOCs of various molecular sizes. The Fourier-transform infrared and Raman spectra indicated that the main binding mechanisms were hydrogen boding, hydrophobic interactions, and π-π interactions. MB was found to be a possible agent for stabilizing HOCs in contaminated sediment. HOCs in sediment slurry continued to become adsorbed to MB for a long time, indicating that relatively long reaction times should be allowed for in situ remediation using MB.

New use for Lentinus edodes bran biochar for tetracycline removal

The abuse of antibiotics poses a threat to the ecological environment and biological health, and how to effectively reduce the residue of tetracycline (TC) in the environment has attracted much attention. In this study, three types of pristine biochar (BCs: PBC300, PBC500, and PBC700) were prepared using agricultural waste shiitake mushroom bran at different pyrolysis temperatures to remove TC from water. The structure and surface chemistry of the adsorbents were characterized using different analytical techniques such as scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. These changes in physicochemical properties improve the adsorption capacity of BC. The PBC300 and PBC500 conform to the Langmuir isothermal adsorption model, while the PBC700 is more compatible with the Freundlich model. According to the fitting results of the Langmuir isotherm model, the maximum saturated adsorption capacities of PBC300, PBC500 and PBC700 for TC were 7.568 mg/g, 14.994 mg/g and 17.684 mg/g, respectively. The correlation coefficients of the pseudo-second-order kinetic models were 0.9882, 0.9882 and 0.9996, respectively, which could well fit the adsorption process of TC by the three BCs, indicating that chemical adsorption was dominant. With the help of machine learning, the relationship between the physicochemical properties of BC and the adsorption capacity of TC was effectively explored. The random forest model was able to fit the adsorption process of BC on TC better. It is expected that this study will guide the rational application of BC in the treatment of TC wastewater.

Effect of H3PO4-modified biochar on the fate of atrazine and remediation of bacterial community in atrazine-contaminated soil

The application of chemically modified biochar is a promising strategy for the remediation of contaminated (e.g., pesticides) soil. In this study, H₃PO₄ was used to modify peanut shell to improve the remediation performance of biochar. Surface area (980.19 m²/g), pore volume (0.12 cm³/g), and the functional groups (OH, CO, and phosphorus-containing groups) on the biochar were increased by H₃PO₄ treatment. The sorption experimental data were well fitted by Freundlich model, while the sorption affinity (K_f) of H₃PO₄ modified biochar (PBC) for atrazine was 128 times greater than that of the untreated biochar (BC) in the aquatic systems. The K_f values of PBC-amended soil to atrazine were increased by 13.57 times than that of single soil. The strong sorption of PBC on atrazine delayed the degradation of atrazine in soil, and the residual percentage of atrazine in soil and soil-PBC mixture were 4.90% and 71.44% at the end of 60-day incubation, with the degradation half-life increased from 13.3 to 121.6 d. The analysis of high-throughput sequencing results showed that atrazine reduced the diversity of soil microbial community, but the abundance of microorganisms with degradation function increased and became dominant species. The addition of PBC in soil accelerated the microbial remediation of atrazine stress, which may promote the soil nitrogen cycle. Therefore, amendment of atrazine contaminated soil with PBC can reduce the environmental risk of atrazine and benefit the soil microbial ecology.

Preparation and Characterization of Biochars Obtained from Biomasses for Combustible Briquette Applications

Renewable energies have been considered as alternative, clean, available, and ecological sources of energy. The production of biochar from biomass by thermochemical means is considered an efficient method of converting biomass for energy production. In this study, the biochars were produced from the biomasses of peanut shells and sugar cane bagasse at different pyrolysis temperatures (400°C, 450°C, and 500°C). The biomass samples and their produced biochars were characterized using calorific value, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy and energy dispersive X-ray spectrometry (SEM and EDX), compressibility index, and combustion behavior in order to analyze their potential. Experimental results showed that biochar has better fuel qualities compared to raw biomass. We also found that increasing the pyrolysis temperature clearly improved the calorific value, the morphology, the porosity of the biochars as well as the compressibility index of the biochars. The interest of this study was to produce renewable biochar from peanut shell waste and sugar cane bagasse for use as solid fuel.

Dual pretreatment of mixing H2O2 followed by torrefaction to upgrade spent coffee grounds for fuel production and upgrade level identification of H2O2 pretreatment

Biochar is a carbon-neutral solid fuel and has emerged as a potential candidate to replace coal. Meanwhile, spent coffee grounds (SCGs) are an abundant and promising biomass waste that could be used for biochar production. This study develops a biochar valorization strategy by mixing SCGs with hydrogen peroxide (H₂O₂) at a weight ratio of 1:0.75 to upgrade SCG biochar. In this dual pretreatment method, the H₂O₂ oxidative ability at a pretreatment temperature of 105 °C contributes to an increase in the higher heating value (HHV) and carbon content of the SCG biochars. The HHV and carbon content of biochar increase by about 6.5% and 7.8%, respectively, when compared to the unpretreated one under the same conditions. Maximized biochar's HHV derived via the Taguchi method is 30.33 MJkg^-1, a 46.9% increase compared to the raw SCG, and a 6.5% increase compared to the unpretreated SCG biochar. The H₂O₂ concentration is 18% for the maximized HHV. A quantitative identification index of intensity of difference (IOD) is adopted to evaluate the contributive level of H₂O₂ pretreatment in terms of the HHV and carbon content. IOD increases with increasing H₂O₂ pretreatment temperature. Before torrefaction, SCGs' IOD pretreated at 50 °C is 1.94%, while that pretreated at 105 °C is 8.06%. This is because, before torrefaction, H₂O₂ pretreatment sufficiently weakens SCGs' molecular structure, resulting in a higher IOD value. The IOD value of torrefied SCGs (TSCG) pretreated at 105 °C is 10.71%, accounting for a 4.59% increase compared to that pretreated at 50 °C. This implies that TSCG pretreated by H₂O₂ at 105 °C has better thermal stability. For every 1% increase in IOD of TSCG, the carbon content of the biochar increases 0.726%, and the HHV increases 0.529%. Overall, it is demonstrated that H₂O₂ is a green and promising pretreatment additive for upgrading SCG biochar's calorific value, and torrefied SCGs can be used as a potential solid fuel to approach carbon neutrality.

Possible Utilization of Distillery Waste in the Carbonization Process

This paper characterizes the carbonization process in terms of the utilization of distillery waste in a laboratory-scale reactor. Due to the increase in market prices of wood and environmental protection laws, biomass waste, including distillery waste, is a potential source for biochar production. An experimental investigation of the carbonization process was carried out for different mixtures of distillery waste and oak sawdust. The obtained results showed that due to the European Standard, biochar from distillery waste could be used for the production of charcoal briquettes for barbecue applications. In addition, biochar from carbonization samples with 66, 50, and 33% distillery waste meet the standards defined by the International Biochar Initiative for HMs content. The analysis of the dynamics of the heating rate showed that adding wood to distillery waste significantly shortens the carbonization process, but this reduces the number of bio-oils produced and its calorific value.

Considerations for evaluating innovative stormwater treatment media for removal of dissolved contaminants of concern with focus on biochar

Stormwater from complex land uses is an important contributor of contaminants of concern (COCs) such as polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), Copper, and Zinc to receiving water bodies. A large portion of these COCs bind to particulate matter in stormwater, which can be removed through filtration by traditional media. However, the remaining dissolved COCs can be significant and require special attention such as engineered treatment measures and media. Biochar is a porous sorbent produced from a variety of organic materials. In the last decade biochar has been gaining attention as a stormwater treatment medium due to low cost compared to activated carbon. However, biochar is not a uniform product and selection of an appropriate biochar for the removal of specific contaminants can be a complex process. Biochars are synthesized from various feedstocks and using different manufacturing approaches, including pyrolysis temperature, impact the biochar properties thus affecting ability to remove stormwater contaminants. The local availability of specific biochar products is another important consideration. An evaluation of proposed stormwater control measure (SCM) media needs to consider the dynamic conditions associated with stormwater and its management, but the passive requirements of the SCM. The media should be able to mitigate flood risks, remove targeted COCs under high flow SCM conditions, and address practical considerations like cost, sourcing, and construction and maintenance. This paper outlines a process for selecting promising candidates for SCM media and evaluating their performance through laboratory tests and field deployment with special attention to unique stormwater considerations.

Selection of additive materials for anaerobic co-digestion of fruit and vegetable waste and layer chicken manure

This study aimed to assess the potential of different additive materials in enhancing the stability and methane production of anaerobic co-digestion of fruit and vegetable waste and layer chicken manure. A biochemical methane potential assay was conducted to evaluate the co-digestion of substrates with the addition of additive materials (10 g L^-1): biochars produced (450 and 550 °C) (from fruit and vegetable waste, layer chicken manure, and wood pruning waste), powdered activated carbon, and zeolites. All additive materials increased methane production. Biochars showed better results regarding methane production (increments of 17 to 28 %). The surface of biochars favored the adhesion of microorganisms, this was confirmed by spectra after co-digestion. Furthermore, the redox-active groups in the biochars may have contributed to the microbiological syntrophism, increasing methane rates. These materials are viable for application in co-digestion systems, and the use of waste for their production is an option for solid waste management.

Evaluation of the Impact of Activated Biochar-Manure Compost Pellet Fertilizer on Volatile Organic Compound Emissions and Heavy Metal Saturation

For this experiment, pelletized activated biochar made of rice hullsor palm bark with swine manure compost was prepared to demonstrate the significant benefits of applying activated biochar-manure compost pellet fertilizer (ABMCP) inmitigating volatile organic compounds (VOCs), odor emission, and heavy metal saturation. Morphology and surface area analysis indicated that the activated rice hull biochar-manure compost pellet (ARP) had a significantly lower surface area, porous volume, and Fe content the activated palm biochar-manure compost pellet (APP). However, the ARP presented great potential to mitigate VOCs and odorant emissions. Our results indicated that the ARP reduced total reduced sulfur (TRS) and volatile fatty acids (VFAs) emissions by 69% and 93%, respectively. Heavy metals such as Pb, As, and Cd were not detected in the leachates fromthe ARP, APP, and swine manure compost. These results suggest that ABMCP can be a potential adsorbent to control VOCs and odorant emissions andpromote sustainable swine manure management and agricultural application.

Impacts of pyrolysis temperatures on physicochemical and structural properties of green waste derived biochars for adsorption of potentially toxic elements

This study comparatively investigated the influence of changes in pyrolysis temperature on the physicochemical, structural, and adsorptive properties of biochars derived from a green waste (Cynodon dactylon L.). For this purpose, the biophysically dried green wastes were pyrolyzed at 400 °C, 600 °C, and 800 °C under the same pyrolysis conditions. The results revealed that the physicochemical and structural properties were varied, depending upon the pyrolysis temperatures. With the increase of pyrolysis temperature, the surface functional groups were escaped, the structure became more porous (pore volume of 0.089 ± 0.001), the metal oxides were remained consistent, and the biochars turned into more alkaline nature (pH of 11.9 ± 0.2). Furthermore, as referring to the adsorptive performance for potentially toxic elements, with experimental adsorption capacity of up to 33.7 mg g^-1 and removal rate up to 96% for a multi-metals containing solution, the biochars pyrolyzed at high temperature (800 °C) was significantly (p < 0.05) higher than those pyrolyzed at low temperature (400 °C). According to the physicochemical and structural properties, and the adsorptive performances of the biochars, the optimal pyrolysis temperature was herein recommended to be 800 °C.

Bio-efficacy of imidazolinones in weed control in a tropical paddy soil amended with optimized agrowaste-derived biochars

Biochar is a black carbon sorbent that has the ability to stabilize organic substances in soil and, therefore, the potential to reduce their bio-availability. This sustainable material can be produced from locally-available agro wastes. The present study, for the first time, investigated the effects of biochars produced from oil palm empty fruit bunches (EFB) and rice husk (RH) on the efficiency of imazapic and imazapyr (two polar members of imidazolinone herbicides) as well as Onduty®, a mixture of them. It was executed in a Malaysian paddy field soil during a 30-day greenhouse experiment. The presence of optimized EFB and RH biochars in the heavy soil generally increases weed seeds germination and plants growth due to stabilization of the herbicides. The effect of EFB biochar was found higher than RH biochar having a higher affinity to the herbicides. An increase in the biochars application rates enhanced their effects as a soil modifier. Differences were more significant in the higher herbicides doses. Efficacies of all the herbicides were generally decreased in the biochar-amended soils. In the presence of 0.5% biochar in soil, the GR₅₀ values for all herbicides were almost similar to biochar-free soil. In a 1.0% biochar-soil mixture, GR₅₀ values of the herbicides increased by about 1.5 times. Bio-efficacies of the herbicides decreased by around 2.0 times as the biochar application rate enhanced to 2.0%. The greatest GR₅₀ values were obtained in the presence of 4.0% biochar in the soils and were about 7.0-8.5 folds, indicating the high capability of amended soil in the stabilization of the herbicides. The findings of this study can help to reduce imidazolinones' pollution and, in this way, prevent the threats of their residues to the environment.

Adsorption effect and the removal mechanism of silicate composite biochar particles on cadmium in soil

Ordinary biochar has the disadvantages of low strength and fragility, and it is difficult to be separated in heavy metal contaminated soil after the remediation process. In order to realize the recovery and reuse of biochar, we prepared silicate composite biochar (SCB) and the magnetic silicate composite biochar (MSCB) with consistent particle size and high hardness. As well as the passivation effect and mechanism of the material on cadmium in soil was also investigated. The results showed that: (1) The MSCB had good hydraulic properties and strong magnetism, which can be quickly separated from the soil under the condition of external magnetic field. (2) The MSCB can remove 30.32%-38.80% of cadmium in the soil after three times of "application-separation-desorption-reuse", as well as the SCB can remove 28.30%-35.78% of cadmium from the soil. (3) The recovered SCB and MSCB had a certain mass loss, the mass loss rate of the biochar particles was in the range of 2.65%-4.90% after each time of recycling. (4) MSCB mainly immobilized cadmium ions through pore interception, complexation of oxygen-containin/iron-containin functional group and precipitation reaction.

Isotherm and thermodynamic studies on the removal of gelatin-stabilized silver nanoparticles from water by activated carbon

Gelatin-stabilized silver nanoparticles (AgNPs) with a particle size of 6.9 (±3.2) nm were synthesized and employed in nanoparticle adsorption onto activated carbon (AC). Subsequently, the synthesized AgNPs and the adsorbed nanoparticles onto the AC (AgNP@AC) were characterized by various techniques including UV–Vis spectrophotometry, transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT–IR) and X–ray diffraction (XRD). AgNPs possessed colloidal stability at a wide pH interval ranging between 4 and 13. Adsorption was studied batch-wise as a function of initial nanoparticle concentration (4–14 mg L-1), temperature (298–323 K), pH (4–13) and adsorbent dosage (0.01–0.05 g). Adsorption isotherms were investigated by fitting the data to different isotherm models including Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D–R). Error analysis indicated that the adsorption is well described by the Langmuir model with a monolayer adsorption capacity of 10.36 mg g-1 for 0.05 g AC at pH 7 and 323 K. Thermodynamic parameters such as enthalpy (66.77 kJ mol-1), entropy (232.92 J mol-1 K-1), and Gibbs free energy (–8.31 kJ mol-1) indicated that the process is endothermic, favorable and spontaneous through physical interactions.

Occurrence of dissolved black carbon in source water and disinfection byproducts formation during chlorination

Dissolved black carbon (DBC), the water-soluble component of black carbon, which is formed by incomplete combustion of fossil fuels or biochar, takes up about 10% of dissolved organic matter (DOM) in river water. However, the distribution of DBC in water environment especially in source water is not clear and as an important component of DOM, whether DBC can produce disinfection byproducts (DBPs) like other DOM during disinfection remains unknown. In this study, the DBC concentrations in seventeen source water samples from East China were measured. The concentrations of DBC in the source water samples ranged from 60 to 270 μg/L, which were positively correlated with UV₂₅₄ absorbance and chemical oxygen demand. The levels of DBC in wet season were higher than that in dry season. The average concentrations of DBC in different types of source water samples followed the order of reservoir > canal > lake > river. DBC could only be removed by 20% during the simulated coagulation, and further generate different categories of DBPs during chlorination, among which the concentrations of haloacetic acids (HAA) were the highest. The results indicated that DBC widely distributes in source water and is an important precursor of HAAs and THMs during chlorination.

Effects of different modifiers on the sorption and structural properties of biochar derived from wheat stalk

Nitrobenzene is a widespread contaminant in water. Biochar (BC) is a promising material for removing organic pollutants, but the adsorption capacity of pristine BC is low. Chemical modification is often used to improve the adsorption performance, but information on the sorption of nitrobenzene by modified BC is rare. In this study, BCs pyrolyzed at 300, 500, and 700 °C were modified by hydrochloric acid (HCl), sulfuric acid (H2SO4), sodium hydroxide (NaOH), hydrogen peroxide (H2O2), and nitric acid (HNO3), respectively. The properties, nitrobenzene sorption behaviors, and sorption mechanisms of different BCs were analyzed. The results showed that chemical modification decreased the sorption of nitrobenzene on BCs pyrolyzed at 300 °C, possibly due to the loss of the partition phase and the increase in polarity after modification. Regarding BCs pyrolyzed at 500 and 700 °C, the NaOH and HCl modifications significantly increased the sorption capacity by 19% and 60%, 18%, and 41%, respectively, possibly due to the increase in surface area, available pores, and aromaticity, while HNO3 modification decreased the sorption capacity by 41% and 31%. Two reasons were probably responsible for the decrease: one was the decrease in surface area after HNO3 modification due to the destruction of pore walls and the continuity of holes; the other was the strong repulsion between the nitro groups formed on the surface of BC and the nitro groups of nitrobenzene that drove nitrobenzene molecules away from the surface. A principal component-based comprehensive evaluation of the BC properties, which were significantly correlated with the sorption isotherm parameters, was used to evaluate the nitrobenzene sorption performance of the modified BC. Overall, BC pyrolyzed at 700 °C modified with NaOH or HCl were proposed as effective sorption materials for the removal of nitrobenzene in environment, which also provided a chemical modified method of biochar derived from agricultural waste.

Effects of the increases in soil pH and pH buffering capacity induced by crop residue biochars on available Cd contents in acidic paddy soils

To explore the effects of the increases in pH and pH buffering capacity (pHBC) induced by crop residue biochars on the changes in soil available Cd content, six acidic paddy soils developed from different parents were amended with seeded sunflower plate biochar (SSPBC), peanut straw biochar (PSBC) and corn straw biochar (CSBC). The pH, pHBC, and available Cd of the soils were measured after laboratory incubation. The results showed that the incorporation of crop residue biochars led to the increases in soil pH and pHBC, but a decrease in soil available Cd content. The decreasing order of available Cd content was SSPBC > PSBC > CSBC and was consistent with the changes in soil pH induced by the biochars. During submerging and draining, soil pH increased first and then declined, however the content of available Cd decreased first and then increased significantly. Soil pH in the treatments with biochars showed little change during draining, which was different from the control without the biochars added. This was attributed to the enhancing effect of the biochars on soil pHBC. Also, there was a significant negative correlation between the change in available Cd content and soil pHBC during submerging/draining alternation and suggested that higher pHBC corresponded to smaller soil available Cd content. Consequently, the amount of Cd absorbed by rice was reduced, thereby reducing the potential risk of soil Cd to humans. These results can provide useful references for the remediation of Cd-contaminated paddy soils.

The molecular markers provide complementary information for biochar characterization before and after HNO3/H2SO4 oxidation

Biochar inevitably goes through long-term aging under biotic and abiotic processes in the environment, which results in various changes in its physicochemical properties. However, the traditional characterization methods based on particle separation cannot effectively monitor biochar in complex matrixes. Molecular markers, especially benzene polycarboxylic acids (BPCAs), can be used to directly identify the source and properties of biochar. In this study, biochars were prepared using corn straw (CS) and pinewood (PW) and were oxidized with HNO₃/H₂SO₄ to simulate the aging processes. Molecular markers of lignin-derived phenols showed that PW has more vanillyl unit and thus more stable than CS. The overall BPCAs content and the relative content of mellitic acid (B6CA) both increased with pyrolysis temperature, indicating increased aromatic condensation/aromaticity. The pristine CS biochar has a higher BPCAs content compared to PW biochar. HNO₃/H₂SO₄ treatment greatly decreased the lignin components and more vanillyl and cinnamyl units were removed from CS biochar than PW biochar. In addition, BPCAs contents decreased by 41-60 mg/g for CS biochar, while increased by 86-133 mg/g for PW biochar after HNO₃/H₂SO₄ oxidation. This is owing to the release of the condensed aromatic structures in CS biochars, but the concentration of the condensed aromatic structures in PW biochars after oxidation. These results showed that PW biochars are more stable than CS biochars. The application of the molecular markers can help understanding the dynamic change of biochar in the environment.

Unintentional release of antibiotics associated with nutrients recovery from source-separated human urine by biochar

The use of biochar to recover nitrogen and phosphorus from wastewater especially source-separated human urine is attractive from both economic and environmental standpoints. The widespread use of pharmaceuticals has raised concerns as they are not fully metabolized and ended up in human urine. The objective of this study is to examine adsorption of antibiotics (azithromycin, ciprofloxacin, sulfamethoxazole, trimethoprim, and tetracycline) and nutrients (ammonium and phosphate) in source-separated human urine by biochar and subsequent desorption. Batch adsorption experiments were conducted using biochar prepared from oak wood (OW) and paper mill sludge (PMS) to elucidate the effects of adsorption time, pH, and adsorbent dose. The desorption of adsorbed nutrients and antibiotics was also investigated. While the nutrient adsorption was more favorable by the PMS biochar, antibiotic adsorption was more prolific by the OW biochar. Hydrogen bonding and π-π interaction were identified as potential adsorption mechanisms. Experimental results agree with the Freundlich isotherm and pseudo-second order models (except the OW biochar for the kinetics). The findings suggest that biochar can adsorb both nutrients (43.30-266.67 mg g^-1) and antibiotics (246.70-389.0 μg g^-1) simultaneously. Lower solution pH (<5) was better for antibiotic adsorption, while higher solution pH (≥5) favored nutrient recovery. Also, desorption of the antibiotics (maximum of 92.6% for trimethoprim) was observed and might arise in the environment with the applications of biochar for nutrient recovery from human urine and subsequently for soil quality improvement. The findings serve as a foundation for future research on adsorption-based methods for separating nutrients and antibiotics in aqueous solutions, particularly urine.

Mechanism evolution and prediction of carbamazepine sorption by mangrove plant residue-derived biochars

A mechanism for carbamazepine (CBZ) sorption by mangrove plant residue-derived biochars pyrolyzed at 200-700 °C (referred as MPR200-MPR700) was elucidated in this study. The experimental results demonstrated that the dominant sorption mechanism of biochars for CBZ was evolved from partition to adsorption with increasing pyrolysis temperature. The CBZ concentration-dependent contributions of partition and adsorption were controlled by the relative noncarbonized and carbonized fractions of biochars. The partition medium changed from a polymeric aliphatic fraction (mangrove plant residue [MPR]200-MPR400) to a more condensed aromatic phase (MPR500-MPR600), which made the partition less favorable. Meanwhile, the adsorption was selectively regulated by polarity (MPR200-MPR300) and porosity (MPR400-MPR700) for different biochars. A pragmatic model including the sorbent aromaticity index (H/C) was put forward to predict CBZ sorption to MPR200-MPR700 and other carbonaceous materials reported in the literature. The findings can be helpful in understanding CBZ-biochar interactions and developing effective sorbents (such as biochars) for pollutant sequestration.

Designing NAZO@BC electrodes for enhanced elimination of hydrophilic organic pollutants in heterogeneous electro-Fenton system: Insights into the detoxification mediated by 1O2 and •OH

Hydrophilic organic pollutants (HLOPs) in effluents of wastewater treatment plants are more prevalent than hydrophobic counterparts, therefore development of upstream processes that can effectively enhance the removal of HLOPs can substantially enhance overall treatment performance. To bridge this gap, 3D electrodes made of biochar-supported Al-ZnO nanoparticles (NAZO@BC) applied in heterogeneous electro-Fenton (EF) system, abbreviated as NBE-EF system, is rationally designed for enhanced elimination of HLOPs in wastewater. Our analysis indicates the NBE-EF system results in an efficient THM elimination, 42.4 times greater than that of conventional EF system. MoS₂ as an efficient cocatalyst plays an important role in the conversion from Fe(III) to Fe(II). Singlet oxygen (¹O₂) and hydroxyl radical (•OH) are identified as the primary reactive oxygen species (ROS) in the NBE-EF system. NAZO@BC electrodes could concentrate HLOPs on their surface and degrade it effectively, achieving also a self-cleaning effect. Effective elimination of four HLOPs, i.e., thiamethoxam (THM), dinotefuran (DIN), nitenpyram (NIT), and acetamiprid (ACE), demonstrated the high degradation performance of the NBE-EF system, even at neutral and alkaline conditions. This study provides a new approach for enhanced elimination of HLOPs in wastewater treatment and mechanical insights into degradation pathways and toxicity attenuation.

Recent Advances of Biochar-Based Electrochemical Sensors and Biosensors

In the context of accelerating the global realization of carbon peaking and carbon neutralization, biochar produced from biomass feedstock via a pyrolysis process has been more and more focused on by people from various fields. Biochar is a carbon-rich material with good properties that could be used as a carrier, a catalyst, and an absorbent. Such properties have made biochar a good candidate as a base material in the fabrication of electrochemical sensors or biosensors, like carbon nanotube and graphene. However, the study of the applications of biochar in electrochemical sensing technology is just beginning; there are still many challenges to be conquered. In order to better carry out this research, we reviewed almost all of the recent papers published in the past 5 years on biochar-based electrochemical sensors and biosensors. This review is different from the previously published review papers, in which the types of biomass feedstock, the preparation methods, and the characteristics of biochar were mainly discussed. First, the role of biochar in the fabrication of electrochemical sensors and biosensors is summarized. Then, the analytes determined by means of biochar-based electrochemical sensors and biosensors are discussed. Finally, the perspectives and challenges in applying biochar in electrochemical sensors and biosensors are provided.