One-Step, Room Temperature, Colorimetric Detection of Mercury (Hg2+) Using DNA/Nanoparticle Conjugates

Picomolar level sensorial dual colorimetric gold nanoparticle sensor for Zn2+ and Hg2+ ions synthesized from bark extract of Lannea Grandis Coromandelica and its wide range applications in real sample analysis

In this work a facile, rapid, reproducible and non-toxic approach has been demonstrated for synthesis of most stable AuNPs from bark extract of Lannea Grandis Coromandelica. UV-Visible spectroscopy, FTIR, TEM, SAED, EDX, XRD, DLS, Zeta Potential, FE-SEM, AFM and XPS techniques were employed for the characterization of synthesized LGC-AuNPs. The UV-Vis spectra of LGC-AuNPs gave SPR peak at 536 nm while the TEM analysis revealed LGC-AuNPs have 20.75 nm size with spherical in shape. DLS study showed the AuNPs have average diameter 50.18 nm. The synthesized AuNPs exhibited very high selectivity, rapid response in recognition towards Zn2+ and Hg2+ ions by changing its color within 20 sec. This proposed sensor can detect very low picomolar level of Zn2+ and Hg2+ ions (LOD value for Zn2+ and Hg2+ were found 1.36 pM and 24.60 pM respectively). Here we also studied effect of several factors such as variation of conc of gold, temperature, incubation time, pH, salt, solvent (polar protic and polar aprotic) to know in which condition AuNPs have high stability and sensitivity. The data revealed that synthesized AuNPs was stable up to two years at pH 6.5 at room temperature in water media and under this condition, it shows maximum sensitivity and reactivity. Moreover, here interference study was carried out to identify high selectivity of synthesized LGC-AuNPs probe in presence of different metal ions. The real sample analyses also revealed the great applicability of this probe. Therefore, this simple, rapid, low-cost, sensing activity appeared to hold great sensibleness for detection of heavy metal ions in real sample.

On-Off-On Fluorometric Detection of Hg(II) and L-Cysteine Using Red Emissive Nitrogen-Doped Carbon Dots for Environmental and Clinical Sample Analysis

This research introduces a novel fluorescence sensor 'on-off-on' employing nitrogen-doped carbon dots (N-CDs) with an 'on-off-on' mechanism for the selective and sensitive detection of Hg(II) and L-cysteine (L-Cys). N-CDs was synthesized using citric acid as the carbon precursor and urea as the nitrogen source in dimethylformamide (DMF) solvent, resulting in red emissive characteristics under UV light. Comprehensive spectroscopic analyses, including UV-Vis, fluorescence, FT-IR, XRD, XPS, Raman, and Zeta potential techniques, validated the structural and optical characteristics of the synthesized N-CDs. The maximum excitation and emission of N-CDs were observed at 548 and 622 nm, respectively. The quantum yield of N-CDs was calculated to be 16.1%. The fluorescence of N-CDs effectively quenches upon the addition of Hg(II) due to the strong coordination between Hg(II) and the surface functionalities of N-CDs. Conversely, upon the subsequent addition of L-Cys, the fluorescence of N-CDs was restored. This restoration can be attributed to the stronger affinity of the -SH group in L-Cys towards Hg(II) relative to the surface functionalities of N-CDs. This dual-mode response enabled the detection of Hg(II) and L-Cys with impressive detection limits of 15.1 nM and 8.0 nM, respectively. This sensor methodology effectively detects Hg(II) in lake water samples and L-Cys levels in human urine, with a recovery range between 99 and 101%. Furthermore, the N-CDs demonstrated excellent stability, high sensitivity, and selectivity, making them a promising fluorescence on-off-on probe for both environmental monitoring of Hg(II) and clinical diagnostics of L-Cys.

Advances in colorimetric aptasensors for heavy metal ion detection utilizing nanomaterials: a comprehensive review

Heavy metal ion contamination poses significant environmental and health risks, necessitating rapid and efficient detection methods. In the last decade, colorimetric aptasensors have emerged as powerful tools for heavy metal ion detection, owing to their notable attributes such as high specificity, facile synthesis, adaptability to modifications, long-term stability, and heightened sensitivity. This comprehensive overview summarizes the key developments in this field over the past ten years. It discusses the principles, design strategies, and innovative techniques employed in colorimetric aptasensors using nanomaterials. Recent advancements in enhancing sensitivity, selectivity, and on-site applicability are highlighted. The review also presents application studies of successful heavy metal ion detection using colorimetric aptasensors, underlining their potential for environmental monitoring and health protection. Finally, future directions and challenges in the continued evolution of these aptasensors are outlined.

Fluorescence Sensing Mechanisms of Versatile Graphene Quantum Dots toward Commonly Encountered Heavy Metal Ions

Graphene quantum dots (GQDs) have received tremendous attention as fluorescent probes for detection of diverse heavy metal ions (HMIs). Nevertheless, the fluorescence sensing mechanisms of versatile GQDs with respect to different HMIs remain elusive. Herein, the fluorescence sensing behaviors and mechanisms of GQDs with amino and carboxyl groups toward commonly encountered Cr6+, Fe3+, Cu2+, Cr3+, Mn2+, Co2+, Ni2+, Zn2+, Cd2+, and Hg2+ under different pH conditions are systemically explored. The results show that the fluorescence of GQDs can be enhanced by Zn2+/Cd2+ and quenched by other HMIs at pH 5.8, while it can be enhanced by HMIs except Cr6+/Fe3+/Cu2+ at pH 2.0. Systematic studies verify that the fluorescence quenching/enhancing is mediated by the synergistic effect of the inner filter effect (IFE) and the photoinduced electron transfer (PET) or metal orbital-controlled chelation-quenched/enhanced fluorescence (CHQF/CHEF) effect. The strong and weak IFEs of Cr6+/Fe3+ and Cr3+/Cu2+, respectively, are one of the reasons for the fluorescence quenching, while other HMIs have no IFE. Moreover, the PET effect caused by the interaction of GQDs with Hg2+ at pH 5.8 and the CHQF/CHEF effect caused by the interaction of GQDs with other HMIs are also crucial for fluorescence quenching/enhancing. The findings suggest that the pH condition, the existing forms of functional groups on GQDs, and the complexation states of HMIs in aqueous systems dominate the PET and CHQF/CHEF effects. The elucidating of the fluorescence sensing mechanisms of GQDs toward different HMIs paves the way for developing versatile sensing platforms for monitoring of HMI contamination.

Synthesis of N,Si co-doped carbon dots to establish a fluorescent sensor for Hg(II) detection with triple signal output

Mercury is a heavy metal with extreme toxicity. Thus, it is of significance to develop an effective method for mercury ion detection with high performance. In this study, carbon dots doped with nitrogen and silicon (N,Si/CQDs) were successfully prepared from folic acid and N-[3-(trimethoxysily)propyl]-ethylenediamine. The N,Si/CQDs show an obvious cyan fluorescence of 460 nm with the radiation of 350 nm. The existence of mercury ions induces the fluorescence quenching of N,Si/CQDs due to photoinduced electron transfer, which was applied for the sensitive sensing of Hg(II). More importantly, the practical application of the N,Si/CQD probe was confirmed by measurements of Hg(II) in real samples of lake water, sorghum and rice. In addition, the N,Si/CQD nanoprobe was integrated on a sensing strip for specific detection of Hg(II). Quantitative measurement of Hg(II) was realized by the outstanding linearity between the diameter (or fluorescence intensity) of the fluorescence quenching ring and the concentration of mercury ions. The sensor shows potential for rapid detection with a triple signal readout on-site and represents a larger step towards practical applications.

Gold Nanoparticles as Exquisite Colorimetric Transducers for Water Pollutant Detection

Gold nanoparticles (AuNPs) are useful nanomaterials as transducers for colorimetric sensors because of their high extinction coefficient and ability to change color depending on aggregation status. Therefore, over the past few decades, AuNP-based colorimetric sensors have been widely applied in several environmental and biological applications, including the detection of water pollutants. According to various studies, water pollutants are classified into heavy metals or cationic metal ions, toxins, and pesticides. Notably, many researchers have been interested in AuNP that detect water pollutants with high sensitivity and selectivity, while offering no adverse environmental issues in terms of AuNP use. This review provides a representative overview of AuNP-based colorimetric sensors for detecting several water pollutants. In particular, we emphasize the advantages of AuNP as colorimetric transducers for water pollutant detection in terms of their low toxicity, high stability, facile processability, and unique optical properties. Next, we discuss the status quo and future prospects of AuNP-based colorimetric sensors for the detection of water pollutants. We believe that this review will promote research and development of AuNP as next-generation colorimetric transducers for water pollutant detection.

A Strong Acid-Induced DNA Hydrogel Based on pH-Reconfigurable A-Motif Duplex

Under a pH value lower than the pK_a of adenine (3.5), adenine-rich sequences (A-strand) form a unique parallel A-motif duplex due to the protonation of A-strand. At a pH above 3.5, deprotonation of adenines leads to the dissolution of A-motif duplex to A-strand single coil. This pH-reconfigurable A-motif duplex has been developed as a novel pH-responsive DNA hydrogel, termed A-hydrogel. The hydrogel state is achieved at pH 1.2 by the A-motif duplex bridging units, which are cross-linked by both reverse Hoogsteen interaction and electrostatic attraction. Hydrogel-to-solution transition is triggered by pH 4.3 due to the deprotonation-induced separation of A-motif duplex. The A-hydrogel system undergoes reversible hydrogel-solution transitions by subjecting the system to cyclic pH shifts between 1.2 and 4.3. An anti-inflammatory medicine, sulfasalazine (SSZ), which intercalates into A-motif duplex, is loaded into A-hydrogel. Its pH-controlled release from A-hydrogel is successfully demonstrated. The strong acid-induced A-hydrogel may fill the gap that other mild acid-responsive DNA hydrogels cannot do, such as protection of orally delivered drug in hostile stomach environment against strong acid (pH ~ 1.2) and digestive enzymes.

Colorimetric detection of heavy metal ions with various chromogenic materials: Strategies and applications

Detection of heavy metal ions has drawn significant attention in environmental and food area due to their threats to the human health and ecosystem. Colorimetry is one of the most frequently-used methods for the detection of heavy metal ions owing to its simplicity, easy operation and rapid on-site detection. The development of chromogenic materials and their sensing mechanisms are the key research direction in the area of colorimetric method. Since each chromogenic material has their unique optical and chemical properties, they have totally different colorimetric sensing mechanisms. This review focuses on the chromogenic materials and their sensing strategies for the colorimetric detection of heavy metal ions. We divide the chromogenic materials into three types, including organic materials, inorganic materials, and other materials. As for each type of chromogenic material, we discuss their detailed sensing strategies, sensing performance, and real sample applications. Moreover, current challenges and perspectives related to the colorimetry of heavy metal ions are also discussed in this review. The aim of this review is to help readers to better understand the principles of colorimetric methods for heavy metal ions and push the development of rapid detection of heavy metal ions.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

Simultaneous colorimetric and electrochemical detection of trace mercury (Hg2+) using a portable and miniaturized aptasensor

We report a novel aptasensor for the simultaneous colorimetric and electrochemical detection of mercury (Hg²⁺). This device consists of a paper-based microfluidic component (μ-PAD) incorporated into a miniaturized three-electrode system fabricated through printed circuit board (PCB) technology. This biosensor is portable, rapid, versatile, and can detect Hg²⁺ down to 0.01 ppm based on 3σ of the blank/slope criteria. Moreover, it is highly selective against As²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Cd²⁺, Mg²⁺, and Fe²⁺, reaching up to 13 times more of the input signal than the other heavy metals. The colorimetric detection mechanism uses aptamer functionalized polystyrene (PS)-AgNPs and Ps-AuNPs microparticles' specific aggregation. The Ps-AuNPs-based system allows qualitative detection (LOD 5 ppm) and stability over seven days (up to 97.59% signal retention). For the Ps-AgNPs-based system, the detection limit is 0.5 ppm with a linear range from 0.5 to 20 ppm (adjusted R²= 0.986) and stability over 30 days (up to 94.95% signal retention). The electrochemical component measures changes in charge transfer resistance upon target-aptamer hybridization using a [Ru (NH₃)₆]³⁺Cl₃] redox probe. The latest component presents a linear range from 0.01 to 1 ppm (adjusted R²= 0.935) with a LOD of 0.01 ppm and performance stability over seven days (up to 102.52 ± 11.7 signal retention). This device offers a universal dual detection platform with multiplexing, multi-replication, quantitative color analysis, and minimization of false results. Furthermore, detection results in river samples showed recoveries up to 91.12% (RSD 0.85) and 105.61% (RSD 1.62) for the electrochemical and colorimetric components, respectively. The proposed system is highly selective with no false-positive or false-negative results in an overall wide linear range and can safeguard the accuracy of detection results in aptasensing platforms in general.

Cost-Effective and Selective Fluorescent Chemosensor (Pyr-NH@SiO2 NPs) for Mercury Detection in Seawater

The release of mercury into the environment has adverse effects on humans and aquatic species, even at very low concentrations. Pyrene and its derivatives have interesting fluorescence properties that can be utilized for mercury (Hg²⁺) ion sensing. Herein, we reported the highly selective pyrene-functionalized silica nanoparticles (Pyr-NH@SiO₂ NPs) for chemosensing mercury (Hg²⁺) ions in a seawater sample. The Pyr-NH@SiO₂ NPs were synthesized via a two-step protocol. First, a modified Stöber method was adopted to generate amino-functionalized silica nanoparticles (NH₂@SiO₂ NPs). Second, 1-pyrenecarboxylic acid was coupled to NH₂@SiO₂ NPs using a peptide coupling reaction. As-synthesized NH₂@SiO₂ NPs and Pyr-NH@SiO₂ NPs were thoroughly investigated by ¹H-NMR, FTIR, XRD, FESEM, EDS, TGA, and BET surface area analysis. The fluorescent properties were examined in deionized water under UV-light illumination. Finally, the developed Pyr-NH@SiO₂ NPs were tested as a chemosensor for Hg²⁺ ions detection in a broad concentration range (0–50 ppm) via photoluminescence (PL) spectroscopy. The chemosensor can selectively detect Hg²⁺ ions in the presence of ubiquitous ions (Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Ag⁺, and seawater samples). The quenching of fluorescence properties with Hg²⁺ ions (LOD: 10 ppb) indicates that Pyr-NH@SiO₂ NPs can be effectively utilized as a promising chemosensor for mercury ion detection in seawater environments.

Acridine-2,4-Dinitrophenyl Hydrazone Conjugated Silver Nanoparticles as an Efficient Sensor for Quantification of Mercury in Tap Water

Excretion of heavy metals especially mercury (Hg2+) from the industries into the environment becomes a major global problem. In this context, mercury is a highly dangerous metal which poses serious impact on human health. In the present study, acridine- (ACR-) based silver nanoparticles (ACR-AgNPs) were prepared and employed as a nanosensor for effective detection and quantification of Hg2+ in tap water. Conjugation between ACR-based coating agent and silver was examined by UV-visible and FT-IR spectroscopy, while morphology and particle size were determined through atomic force microscopy (AFM), dynamic light scattering (DLS), and scanning electron microscopy (SEM). Furthermore, sensing behavior of nanosensor for metal ions was evaluated by mixing different metals such as Mn2+, Ni2+, Ba2+, Mg2+, Cr3+, Pb2+, Pd2+, Al3+, Sn2+, Fe2+, Co2+, Cu2+, Fe3+, Cd2+, and Hg2+with ACR-AgNPs. Among all the added metal ions, only Hg2+resulted in significant quenching in the absorption intensity of ACR-AgNPs. The limit of detection of the ACR-AgNP-based nanosensor was found to be 1.65 μM in a wide pH range (1-14). The proposed mercury sensor worked efficiently in the presence of other interfering agents such as other metal ions. Therefore, the synthesized ACR-AgNPs have proved to be an efficient and robust nanosensor for quantitative detection of Hg2+ in real sample analysis such as tap water. The proposed method does not require expensive instrumentation and trained manpower.

Aptamer-functionalized and silver-coated polydopamine-copper hybrid nanoflower adsorbent embedded with magnetic nanoparticles for efficient mercury removal

Mercury (Hg) emissions are increasing annually owing to rapid global industrialization. Hg poisoning can severely affect the human body owing to its persistence and bioaccumulation. In this study, hybrid nanoflowers (NFs) were synthesized by promoting the formation of primary copper-phosphate crystals coordinated with polydopamine (PDA) and Fe₃O₄ magnetic nanoparticles (MNPs), followed by coating with silver nanoparticles on the surface of the NFs (Ag-MNP-PDA-Cu NFs). The results suggest that the hierarchical structure of the NFs enabled a large surface area with nanosized pores, which were exploited for Hg adsorption. The adsorbed Hg ions could be further eliminated from the solution based on the magnetic characteristics of the NFs. Additionally, hybrid NFs functionalized with Hg²⁺-binding aptamers (Apt-Ag-MNP-PDA-Cu NFs) were prepared based on the silver-sulfur interactions between the Ag-MNP-PDA-Cu NFs and thiol-modified aptamers. The performance of both adsorbents demonstrated that the immobilization of Hg²⁺-binding aptamers significantly improved the elimination of Hg from solution. The Hg²⁺ adsorption isotherm of the Apt-Ag-MNP-PDA-Cu NFs followed the Dubinin-Radushkevich model, with a maximum adsorption capacity of 1073.19 mg/g. The Apt-Ag-MNP-PDA-Cu NFs adsorbed greater amounts of Hg²⁺ than the non-functionalized NFs at the same concentrations, which confirmed that the functionalization of Hg²⁺-binding aptamers on the NFs improved the Hg²⁺ removal performance. The results suggest that Apt-Ag-MNP-PDA-Cu NFs could serve as an efficient Hg-removing adsorbent, possibly by providing binding sites for the formation of T-Hg²⁺-T complexes.

Rapid and sensitive detection of Hg2+ with a SERS-enhanced lateral flow strip

A SERS-LFS strategy was designed and applied for the direct detection of target Hg2+ with greatly improved sensing performance by SERS measurements on the T line of the LFS, which did not change the intrinsic simplicity of the LFS.

Simultaneous and visual detection of multiple dopes by an aptamer/AuNPs sensor

Through introducing multiple aptamers in a suitable ratio, we achieved the simultaneous and visual detection of three dopes in one sensor.

Wide-field determination of aqueous mercury(II) based on tail-extensible DNA fluorescent probe with tunable dynamic range

Mercury (Hg) is one of the most hazardous pollutants, widely distributed in water, atmosphere, and soil, while the Hg contents from different sources are greatly different. Until now, numerous reported methods are only suitable for a kind of sample because they cannot reconcile sensitivity and linear range. In this work, a tail-extensible DNA fluorescent probe for "turn on" detection of Hg²⁺ with tunable dynamic range and high sensitivity was developed, which was based on segmental hybridization between silver nanoclusters (AgNCs)-covered DNA and different guanine-rich DNAs. By adding adenine-guanine-cytosine (AGC) base repeats as a tail of the guanine-rich DNA, the formation constant of T-Hg²⁺-T complex was effectively modulated within two orders of magnitude. Based on it, a tunable dynamic range from 0.035 to 0.2 pM to 8.0-120.0 pM was achieved by combining four fluorescent probes with different tail lengths. The Hg²⁺contents from different sources were successfully measured. This evidenced the proposed sensor's application toward wide-field detection, which is useful for the direct and objective comparison of results from different sources, and therefore providing a way for solving the shortcomings of reported methods for Hg²⁺ detection. Additionally,this present method is simple, cost-effective and time-saving, ultrasensitive and highly selective, which is favorable for expanding its applications and subsequent mercury pollution control.

Highly Sensitive Detection for Mercury Ions Using Graphene Oxide (GO) Sensors

The mercury ion (Hg²⁺) is one of the heavy metal ions, and its presence in trace amounts can cause physiological damage to an organism. Traditional methods of Hg²⁺ detection have been useful but have also had numerous limitations and challenges, and as a result, it is important to design new and sophisticated methods that can aid in the detection of Hg²⁺. In this paper, two fluorescent dyes, carboxyfluorescein (FAM) and SYBR Green I, were used to label and intercalate DNA probes immobilized on the surface of graphene oxide (GO) for sensors to detect Hg²⁺. FAM and SYBR Green I dye share close excitation and emission wavelength spectra, which can promote and amplify the detection of signals, and also increase the limit of detection (LOD). The results showed that the limit of detection in this method was 0.53 nM. Moreover, when the sensors with double amino groups on the surface of GO were carried out to detect Hg²⁺, a limit of detection was improved to 0.43 nM. The sensors were then applied in the real sample. The results show that this method has a promising potential in Hg²⁺ detection.

An asymmetric Schiff base-functionalized gold nanoparticle-based colorimetric sensor for Hg2+ ion determination: experimental and DFT studies

We report a colorimetric sensor for the detection of Hg²⁺ ions utilizing surface-modified gold nanoparticles. Gold nanoparticles (GNPs) were synthesized by direct reduction and were subsequently functionalized using Schiff base ligands. Schiff base ligands as electron transfer agents have been frequently used for the determination of heavy metal ions. From the spectroscopic analysis, it was found that the mechanism could be defined as coordination between azomethine nitrogen and the carbonyl oxygen of the ligand with Hg²⁺ ions. The affinity of Hg²⁺ ions towards the bidentate Schiff base on the GNPs result from their self-aggregation and investigated to be a powerful asset for the development of Hg²⁺ ion-selective sensors, which is accompanied by a visible color change from pink to purple or can be detect by UV-Vis spectroscopy. The optimized structures and binding mechanisms were supported with a high correlation and agreement via spectroscopy and DFT calculations. These simple colorimetric tests can be extended for the rapid pre-screening of a wide variety of heavy metal ions for onsite detection and mitigation.

Spatiotemporal patterning of photoresponsive DNA-based hydrogels to tune local cell responses

Understanding the spatiotemporal effects of surface topographies and modulated stiffness and anisotropic stresses of hydrogels on cell growth remains a biophysical challenge. Here we introduce the photolithographic patterning or two-photon laser scanning confocal microscopy patterning of a series of o-nitrobenzylphosphate ester nucleic acid-based polyacrylamide hydrogel films generating periodically-spaced circular patterned domains surrounded by continuous hydrogel matrices. The patterning processes lead to guided modulated stiffness differences between the patterned domains and the surrounding hydrogel matrices, and to the selective functionalization of sub-regions of the films with nucleic acid anchoring tethers. HeLa cells are deposited on the circularly-shaped domains functionalized with the MUC-1 aptamers. Initiation of the hybridization chain reaction by nucleic acid tethers associated with the continuous hydrogel matrix results in stress-induced ordered orthogonal shape-changes on the patterned domains, leading to ordered shapes of cell aggregates bound to the patterns.

Sodium Alginate Micelle-Encapsulating Zinc Phthalocyanine Dye-Sensitized Photoelectrochemical Biosensor with CdS as the Photoelectric Material for Hg2+ Detection

A simple and selective photoelectrochemical (PEC) biosensor was constructed for Hg²⁺ detection based on zinc phthalocyanine (ZnPc) dye-sensitized CdS using alginate not only as a carrier but also as a binder. First, CdS as a photoactive material was in situ modified on the electrode surface using a rapid and simple electrodeposition to obtain an initial photocurrent signal. Second, ZnPc was loaded in the amphiphilic alginate micelle and then was coated onto the CdS film surface via alginate as the binder. The photocurrent was subsequently enhanced due to the favorable dye sensitization effect of ZnPc to CdS. Finally, the thymine-rich probe DNA was immobilized on the modified ITO surface via coupling reaction between the carbonyl groups of the amphiphilic polymer and the amino groups of the probe DNA. In the presence of Hg²⁺, the thymine-Hg²⁺-thymine (T-Hg²⁺-T) structure was formed due to the specific bond of Hg²⁺ with thymine, resulting in the decrease of photocurrent due to the increase of steric hindrance on the modified electrode surface. The proposed PEC biosensor for Hg²⁺ detection possessed a wide linear range from 10 pM to 1.0 μM with a detection limit of 5.7 pM. This biosensor provides a promising platform for detecting other biomolecules of interest.

Colorimetric and turn-on fluorescence determination of mercury (II) by using carbon dots and gold nanoparticles

A colorimetric and turn-on fluorometric assay with high sensitivity and selectivity is described for the optical detection of mercury (II) ions (Hg²⁺), based on carbon dots with -SH (SN-CDs) and gold nanoparticles (AuNPs). On addition of Hg²⁺, the color of the system (SN-CDs/AuNPs) changes from red to blue. A new absorption peak appears at 700 nm, and its absorbance increases with the concentration of Hg²⁺, while at 530 nm, the absorbance of AuNPs decreases. Taking the ratio of absorbance at 700 and 530 nm as a signal, a colorimetric method with linear detection range of 0.5-4.0 μM was established for the determination of Hg²⁺. Meanwhile, citrate ions on the surface of AuNPs can reduce Hg²⁺ to Hg⁰, and through the strong affinity of Hg⁰ and gold, gold-mercury alloys were formed to occupy the surface of AuNPs, so that the SN-CDs were re-free and the fluorescence of SN-CDs was restored. Consequently, a fluorometric method was founded in the linear detection range from 0.5 to 15.0 μM of mercury (II). This dual-mode (colorimetric and turn-on fluorometric) method was applied successfully for determination of Hg²⁺ in real water samples.

DNA-templated fluorescent silver nanoclusters on-off switch for specific and sensitive determination of organic mercury in seafood

Organic mercury including methyl-mercury and ethyl-mercury (CH₃Hg⁺ and C₂H₅Hg⁺) has high toxicity and bio-accumulation, and thus is easy to generate bio-amplification in food chain. Hence, the specific detection of organic mercury has great significance for objectively assessing the health risk of mercury in seafood. We herein designed an aptamer (A_S-T7), which consists of a silver nanoclusters (AgNCs) scaffold sequence (A_S) and a T-rich sequence (A_T7), for simultaneously synthetizing DNA-templated AgNCs and recognizing organic mercury, and further developed a label-free fluorescent method for the sensitive and specific determination of organic mercury (CH₃Hg⁺ and C₂H₅Hg⁺ total concentration) by using DNA-templated AgNCs as signal. Without organic mercury, Ag⁺ in the mixture of aptamer and Ag⁺ was bond on A_S of aptamer to form A_S-templated AgNCs after reduction, and thus emitted strong fluorescence. Whereas, in the presence of organic mercury, CH₃Hg⁺/C₂H₅Hg⁺ was bond on A_T7 of aptamer to generate photoinduced electron transfer (PET) between CH₃Hg⁺/C₂H₅Hg⁺ and A_S-templated AgNCs, and thus results in fluorescence quenching of A_S-templated AgNCs. The fluorescent method could be used to rapidly detect organic mercury with a detection limit of 5.0 nM (i.e. 1.01 ng Hg/g), which meets the U.S. EPA standard of 0.3 mg/kg (wet). The method was successfully used to detect organic mercury in water and fish muscle with a recovery of 96%-104% and an inter-days RSD (n = 5) < 7%. The success of the study promised a reliable method for rapid and specific detection of organic mercury in environmental and biological samples.

Recent Trends in Noble Metal Nanoparticles for Colorimetric Chemical Sensing and Micro-Electronic Packaging Applications

Noble metal NPs are highly attractive candidates because of their unique combination of physical, chemical, mechanical, and structural properties. A lot of developments in this area are still fascinating the materials research community, and are broadly categorized in various sectors such as chemical sensors, biosensors, Förster resonance energy transfer (FRET), and microelectronic applications. The related function and properties of the noble metals in these areas can be further tailored by tuning their chemical, optical, and electronic properties that are influenced by their size, shape, and distribution. The most widely used Au and Ag NPs in dispersed phase below 100 nm exhibit strong color change in the visible range which alters upon aggregation of the NPs. The chemical sensing of the analyte is influenced by these NPs aggregates. In this article, we have summarized the uniqueness of noble metal NPs, their synthesis methods, nucleation and growth process, and their important applications in chemical sensing, microelectronic packaging, and Förster resonance energy transfer.

Synthesis and characterization of a plant growth regulator based silver nanoparticles for the ultrasensitive detection of environmentally toxic Hg2+ ions in tap water

Herein, we report the synthesis and characterization of a plant growth regulator based silver nanoparticles and its application as a sensor for the ultrasensitive detection of toxic metal ions (Hg2+) in tapwater.

On-site, rapid and visual method for nanomolar Hg2+ detection based on the thymine–Hg2+–thymine triggered “double” aggregation of Au nanoparticles enhancing the Tyndall effect

This work describes a new nanosensor for the simple, rapid, portable, colorimetric analysis of mercury(ii) (Hg²⁺) ions by combining the sensitive Tyndall effect (TE) of colloidal Au nanoparticles (AuNPs) with specific thymine–Hg²⁺–thymine (T–Hg²⁺–T) coordination chemistry for the first time. For the TE-inspired assay (TEA), in the presence of Hg²⁺ in a sample, the analyte can selectively mediate the hybridization of three types of flexible single-stranded DNAs (ssDNAs) to form stable rigid double-stranded DNAs (dsDNAs) via the T–Hg²⁺–T ligand interaction. Subsequent self-assembly of the dsDNAs with terminal thiol groups on the AuNPs' surfaces led to their “double” aggregation in addition to the lack of sufficient ssDNAs as the stabilizing molecules in a high-salt solution, resulting in a remarkably enhanced TE signal that positively relied on the Hg²⁺ level. The results demonstrated that such a TEA method enabled rapid naked-eye qualitative analysis of 625 nM Hg²⁺ within 10 min with an inexpensive laser pointer pen as an inexpensive handheld light source to generate the TE response. Making use of a smartphone for portable TE readout could further quantitatively detect the Hg²⁺ ions in a linear concentration range from 156 to 2500 nM with a limit of detection as low as 25 nM. Moreover, the developed equipment-free nanosensor was also used to analyze the Hg²⁺ ions in real samples including tap water, drinking water, and pond water, the obtained recoveries were within the range of 93.68 to 108.71%. To the best of our knowledge, this is the first report of using the AuNPs and functional nucleic acids to design a TE-based biosensor for the analysis of highly toxic heavy metal ions.

A new equipment-free colorimetric nanosensor was initially developed for quantitative point-of-need detection of nanomolar Hg²⁺ ions based on the enhancement in Tyndall effect of Au nanoparticles via their target-triggered “double” aggregation.

Interfacing DNA with Gold Nanoparticles for Heavy Metal Detection

The contamination of heavy metals (e.g., Hg, Pb, Cd and As) poses great risks to the environment and human health. Rapid and simple detection of heavy metals of considerable toxicity in low concentration levels is an important task in biological and environmental analysis. Among the many convenient detection methods for heavy metals, DNA-inspired gold nanoparticles (DNA-AuNPs) have become a well-established approach, in which assembly/disassembly of AuNPs is used for colorimetric signaling of the recognition event between DNA and target heavy metals at the AuNP interface. This review focuses on the recent efforts of employing DNA to manipulate the interfacial properties of AuNPs, as well as the major advances in the colorimetric detection of heavy metals. Beginning with the introduction of the fundamental aspects of DNA and AuNPs, three main strategies of constructing DNA-AuNPs with DNA binding-responsive interface are discussed, namely, crosslinking, electrostatic interaction and base pair stacking. Then, recent achievements in colorimetric biosensing of heavy metals based on manipulation of the interface of DNA-AuNPs are surveyed and compared. Finally, perspectives on challenges and opportunities for future research in this field are provided.

Selective determination of Ag+ in the presence of Cd2+, Hg2+ and Cu2+ based on their different interactions with gold nanoclusters

In this work, a fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters (AuNCs). That is, bovine serum albumin (BSA) templated AuNCs with double emission peaks were synthesized using BSA as a protective agent. AuNCs with uniform distribution and average size between 2.0 and 2.2 nm were synthesized using a green and simple method, and showed bright orange-red fluorescence under ultraviolet light. AuNCs have two emission peaks at 450 nm and 630 nm with an excitation wavelength of 365 nm. Under alkaline conditions, Cd²⁺ can combine with the surface sulfhydryl groups of BSA–AuNCs to form Cd–S bonds, which cause AuNCs to aggregate, resulting in an increase in fluorescence intensity at 630 nm. Conversely, due to the d¹⁰–d¹⁰ metal affinity interaction, the addition of Hg²⁺ can reduce the fluorescence peak at 630 nm. Ag⁺ was reduced to Ag⁰ by gold nuclei in AuNCs, forming a stable hybrid Au@ AgNCs species with blue-shifted and enhanced fluorescence. Finally, the paramagnetic behavior of Cu²⁺ combined with BSA causes the excited electrons of the gold cluster to lose their energy via ISC, eventually leading to simultaneous quenching of the two emission peaks. The results show that the limit of detection (LOD) of Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.

A fluorescence method was developed for selective detection of Ag⁺ in the presence of Cd²⁺, Hg²⁺, and Cu²⁺ based on gold nanoclusters. The limit of detection for Ag⁺, Hg²⁺, Cd²⁺ and Cu²⁺ is 1.19 μM, 3.39 μM, 1.83 μM and 5.95 μM, respectively.

A review on nanostructure-based mercury (II) detection and monitoring focusing on aptamer and oligonucleotide biosensors

Heavy metal ion pollution is a severe problem in environmental protection and especially in human health due to their bioaccumulation in organisms. Mercury (II) (Hg²⁺), even at low concentrations, can lead to DNA damage and give permanent harm to the central nervous system by easily passing through biological membranes. Therefore, sensitive detection and monitoring of Hg²⁺ is of particular interest with significant specificity. In this review, aptamer-based strategies in combination with nanostructures as well as several other strategies to solve addressed problems in sensor development for Hg²⁺ are discussed in detail. In particular, the analytical performance of different aptamer and oligonucleotide-based strategies using different signal improvement approaches based on nanoparticles were compared within each strategy and in between. Although quite a number of the suggested methodologies analyzed in this review fulfills the standard requirements, further development is still needed on real sample analysis and analytical performance parameters.

Combating Essential Metal Toxicity: Key Information from Optical Spectroscopy

Chelation therapy is one of the most effective and widely accepted methods of treatment to reduce metal toxicity caused by an excess amount of essential metals. Essential minerals play an important role in maintaining healthy human physiology. However, the presence of an excess amount of such essential metals can cause cell injury, which finally leads to severe life-threatening diseases. Chelating complexes can efficiently capture the targeted metal and can easily be excreted from the body. Commonly utilized metal chelators have major side effects including long-term damage to some organs, which has pointed out the need of less harmful biocompatible chelating agents. In this work, we have investigated the iron chelating property of curcumin through various spectroscopic tools by synthesizing and characterizing the iron-curcumin (Fe-Cur) complex. We have also investigated whether the synthesized materials are able to retain their antioxidant activity after the chelation of a substantial amount of metal ion. Our study unravels the improved antioxidant activity of the synthesized chelate complex. We further demonstrate that the proposed complex generates no significant reactive oxygen species (ROS) under dark conditions, which makes it a promising candidate for chelation therapy of iron toxicity. Femtosecond-resolved fluorescence studies further provide insight into the mechanism of activity of the new complex where electron transfer from ligand to metal has been observed prominently. Thus, the Fe-Cur complex has a potential to act as a dual activity medicine for excretion of toxic metal ions via chelation and as a therapeutic agent of oxidative stress caused by the metal ion as well.

A magnetic relaxation switching and visual dual-mode sensor for selective detection of Hg2+ based on aptamers modified Au@Fe3O4 nanoparticles

The solvated mercuric ion (Hg²⁺) from industrial pollutants are highly toxic to the ecological environment and human health. Driven by urgent need for the selective and sensitive detection of Hg²⁺, a magnetic relaxation switching (MRS) based on Fe₃O₄ nanoparticles (NPs) was designed. Practically, the concentrations of Hg²⁺ in industrial pollutant is usually much higher than the detection range. Thus, gold nanoparticles (AuNPs) were synthesized on the surface of Fe₃O₄ NPs to enable the visual detection of Au@Fe₃O₄ NPs. The presence of Hg²⁺ in sample can specifically cause the aggregation of Au@Fe₃O₄-aptamers NPs through T-Hg²⁺-T base pairs, leading to the change in transverse relaxation time T₂ value of detection solution. The MRS sensor showed excellent response for Hg²⁺ ions in the range of 10 nM-100 nM and 100 nM to 5 μM. A highly sensitive and selective measurement of Hg²⁺ was obtained with a limit of detection of 2.7 nM. Noticeably, the visual detection can qualitatively analyze the Hg²⁺ beyond 5 μM by naked eye without advanced instrumentation and skilled operators.

Sequential Ag+/biothiol and synchronous Ag+/Hg2+ biosensing with zwitterionic Cu2+-based metal-organic frameworks

Zwitterionic metal-organic frameworks (MOFs) of {[Cu(Cbdcp)(Dps)(H₂O)₃]·6H₂O}_n (MOF 1) and [Cu₄(Dcbb)₄(Dps)₂(H₂O)₂]_n (MOF 2) (H₃CbdcpBr = N-(4-carboxybenzyl)-(3,5-dicarboxyl)pyridinium bromide; H₂DcbbBr = 1-(3,5-dicarboxybenzyl)-4,4'-bipyridinium bromide; Dps = 4,4'-dipyridyl sulfide) quench the fluorescence of cytosine-rich DNA tagged with 5-carboxytetramethylrhodamine (TAMRA, emission at 582 nm, denoted as C-rich P-DNA-1) and yield the corresponding P-DNA-1@MOF hybrids. Exposure of these hybrids to Ag⁺ results in the release of the P-DNA-1 strands from the MOF surfaces as double-stranded, hairpin-like C-Ag^I-C (ds-DNA-1@Ag⁺) with the restoration of TAMRA fluorescence. The ds-DNA-1@Ag⁺ formed on the surface of 1 can subsequently sense biothiols cysteine (Cys), glutathione (GSH), and homocysteine (Hcy) due to the stronger affinity of mercapto groups for Ag⁺ that serves to unfold the ds-DNA-1@Ag⁺ duplex, reforming P-DNA-1, which is re-adsorbed by MOF 1 accompanied by quenching of TAMRA emission. Meanwhile, MOF 2 is also capable of co-loading a thymine-rich probe DNA tagged with 5-carboxyfluorescein (FAM, emission at 518 nm, denoted as T-rich P-DNA-2) to achieve synchronous sensing of Ag⁺ and Hg²⁺, resulting from the simultaneous yet specific ds-DNA-1@Ag⁺ and T-Hg^II-T duplex (ds-DNA-2@Hg²⁺) formation, as well as the distinctive emission wavelengths of TAMRA and FAM. Detection limits are as low as 5.3 nM (Ag⁺), 14.2 nM (Cys), 13.5 nM (GSH), and 9.1 nM (Hcy) for MOF 1, and 7.5 nM (Ag⁺) and 2.6 nM (Hg²⁺) for MOF 2, respectively. The sequential sensing of Ag⁺ and biothiols by MOF 1, and the synchronous sensing of Ag⁺ and Hg²⁺ by MOF 2 are rapid and specific, even in the presence of other mono- and divalent metal cations or other biothiols at much higher concentrations. Molecular simulation studies provide insights regarding the molecular interactions that underpin these sensing processes.

Stochastic DNA Dual-Walkers for Ultrafast Colorimetric Bacteria Detection

Rapid, sensitive, and reliable pathogen detection is growing in importance in human health and safety. In this work, we report a stochastic DNA dual-walker-based colorimetric biosensor for bacterial detection. In the presence of target bacteria, two kinds of released multiple walking strands are allowed for continuous walking on the Au nanoparticle (AuNP)-based 3D track, resulting in destabilized aggregation of AuNP-based probes. The induced color change from red to blue can serve as an analytical signal for colorimetric detection of target bacteria. We demonstrated that this mothed enables sensitive and specific bacterial detection within 15 min due to its ultrafast reaction kinetics and sensitive color change, showing a linear response ranging from 10⁰ to 10⁵ CFU/mL with a limit of detection of 1 CFU/mL. Moreover, we also realized analysis of practical samples using this colorimetric biosensor. Given its features of rapid, sensitive, specific, and reliable analysis, our stochastic dual-walker-based colorimetric biosensor shows much promise in point-of-care testing for bacteria detection.

Indirect determination of mercury(II) by using magnetic nanoparticles, CdS quantum dots and mercury(II)-binding aptamers, and quantitation of released CdS by graphite furnace AAS

This work describes an aptamer based method for highly sensitive determination of Hg(II). A Hg(II)-binding ssDNA aptamer was linked to silica-coated magnetic nanoparticles (magNPs). Then, a conjugate composed of graphene and CdS quantum dots (Gr-CdS) was linked to the complementary ssDNA. On mixing the two components, a duplex of type magNP-dsNNA-Gr/CdS is generated. If Hg(II) is added, it wills capturing the aptamer, and this leads to the release of Gr/CdS because of the formation of a stable thymine-Hg²⁺-thymine link. External magnetic force is used to remove the remaining complex. The released graphene-CdS is decomposed by HNO₃ and injected into a graphite furnace AAS. The detectable amount of Cd is proportional to the concentration of Hg(II) in the sample. Under the optimal conditions, the method has a linear response in the 2.50 aM to 0.25 nM Hg(II) concentration range, and the detection limit is as low as 7.6 aM (at S/N = 3). It has high selectivity for Hg(II) over other metal ions. Graphical abstract.

Plasmonic bimetallic nanodisk arrays for DNA conformation sensing

The integration of large-scale 2D bimetallic Ag/Au nanodisk arrays with gold nanoparticles is developed for sensing DNA conformation with the assistance of 3D finite-difference time-domain simulation. The optimized system comprising Ag/Au nanodisk arrays and gold nanoparticles offers a more than 6-fold enhancement in surface plasmon resonance shift, enabling the feasibility for sensitive DNA detection with a detection limit down to 100 femtomolar. Importantly, owing to the distance-dependent nature of the surface plasmon signal, sensitive differentiation of DNA conformations can be achieved with a conventional optical measurement. This platform could provide new exciting capabilities for a reliable, reproducible, and label-free assay analysis for investigating the conformations of DNA and other biological molecules.

Noble Metal Nanoparticles-Based Colorimetric Biosensor for Visual Quantification: A Mini Review

Nobel metal can be used to form a category of nanoparticles, termed noble metal nanoparticles (NMNPs), which are inert (resistant to oxidation/corrosion) and have unique physical and optical properties. NMNPs, particularly gold and silver nanoparticles (AuNPs and AgNPs), are highly accurate and sensitive visual biosensors for the analytical detection of a wide range of inorganic and organic compounds. The interaction between noble metal nanoparticles (NMNPs) and inorganic/organic molecules produces colorimetric shifts that enable the accurate and sensitive detection of toxins, heavy metal ions, nucleic acids, lipids, proteins, antibodies, and other molecules. Hydrogen bonding, electrostatic interactions, and steric effects of inorganic/organic molecules with NMNPs surface can react or displacing capping agents, inducing crosslinking and non-crosslinking, broadening, or shifting local surface plasmon resonance absorption. NMNPs-based biosensors have been widely applied to a series of simple, rapid, and low-cost diagnostic products using colorimetric readout or simple visual assessment. In this mini review, we introduce the concepts and properties of NMNPs with chemical reduction synthesis, tunable optical property, and surface modification technique that benefit the development of NMNPs-based colorimetric biosensors, especially for the visual quantification. The “aggregation strategy” based detection principle of NMNPs colorimetric biosensors with the mechanism of crosslinking and non-crosslinking have been discussed, particularly, the critical coagulation concentration-based salt titration methodology have been exhibited by derived equations to explain non-crosslinking strategy be applied to NMNPs based visual quantification. Among the broad categories of NMNPs based biosensor detection analyses, we typically focused on four types of molecules (melamine, single/double strand DNA, mercury ions, and proteins) with discussion from the standpoint of the interaction between NMNPs surface with molecules, and DNA engineered NMNPs-based biosensor applications. Taken together, NMNPs-based colorimetric biosensors have the potential to serve as a simple yet reliable technique to enable visual quantification.

Multicolor Aptasensor Based on DNA-Induced Au-Ag Nanorods for Simultaneous and Visual Detection of Inorganic and Organic Mercury

Compared to inorganic mercury (Hg²⁺), methyl-mercury (CH₃Hg⁺) and ethyl-mercury (C₂H₅Hg⁺) (organic mercury) not only have a much stronger toxicity but also are more easily accumulated by marine organisms to produce bioamplification. Therefore, the simultaneously onsite detection of Hg²⁺ and organic mercury is of great significance to ensure the safety of seafood, and it is also a hard challenge. We designed a T-rich aptamer, H_T7, for specifically recognizing Hg²⁺ and organic mercury and developed a multicolor aptasensor for simultaneous discrimination and detection of Hg²⁺ and organic mercury with only bare-eye observation using H_T7 as a recognition probe and gold nanorods (AuNRs) as a signal. In the presence of Hg²⁺ and Ag⁺, Hg²⁺ preferentially and specifically bind with H_T7 immobilized on AuNRs surface and induce the formation of a monolayer Ag/Hg amalgam on the AuNRs surface after reduction, resulting in a change in color from orange to faint purple and a corresponding shift in the absorption peak from 820 to 730 nm in the solution. However, in the presence of CH₃Hg⁺ or C₂H₅Hg⁺ and Ag⁺, CH₃Hg⁺ or C₂H₅Hg⁺ preferentially bind with H_T7 immobilized on the AuNRs surface and induce the formation of a monolayer Ag⁰ on the AuNRs surface after reduction, which results in the change in color from orange to atrovirens and the corresponding shift in the absorption peak shift from 820 to 670 nm in the solution. Thus, the inorganic and organic mercury (total of CH₃Hg⁺ and C₂H₅Hg⁺) can be specifically discriminated and detected by only bare-eye observation. The method can be used to simultaneously detect inorganic and organic mercury in seawater by the bare-eye observation with a visual detection limit of 2.0 ppm for Hg²⁺ and 10.0 ppm for organic mercury. The success of this study is a useful enlightenment to develop an instrument-free method for an onsite detection of trace inorganic and organic mercury in environment by a bare-eye observation, although the sensitivity of the method is relatively low.

Catalytic Biosensors from Complex Coacervate Core Micelle (C3M) Thin Films

Enzymes have been applied to a variety of industrially and medically relevant chemistries as both catalysts and sensors. Incorporation of proteins and enzymes into complex coacervates has been demonstrated to improve the thermal, chemical, and temporal stability of enzymes in solution. In this work, a neutral-cationic block copolymer and an enzyme, alkaline phosphatase, are incorporated into complex coacervate core micelles (C3Ms) and coated onto a solid substrate to create a biocatalytic film from aqueous solution. The incorporation of photo-cross-linkable groups into the neutral block of the polymer allows the film to be cross-linked under ultraviolet light, rendering it insoluble. The morphology of the film is shown to depend most strongly on the protein loading within the film, while solvent annealing is shown to have a minimal effect. These films are then demonstrated as specific sensors for Zn²⁺ in solution in the presence of other metals, a model reaction for ion-selective heavy metal biosensing useful in environmental monitoring. They are shown to have low leaching and maintain sufficient activity and response for sensing for 1 month after aging under ambient conditions and at 40 °C and 50% relative humidity. The C3M immobilization method demonstrated can be applied to a wide variety of proteins with minimal chemical or genetic modification and could be used for immobilization of charged macromolecules in general to produce a wide variety of thin-film devices.

Autocatalytic DNA circuit for Hg2+ detection with high sensitivity and selectivity based on exonuclease III and G-quadruplex DNAzyme

Utilizing G-quadruplex as the signal report probe, an ultrasensitive and label-free autocatalytic DNA circuit for Hg²⁺ detection on the basis of exonuclease III (Exo III)-assisted cascade signal amplification has been proposed. In the absence of Hg²⁺, the hairpin A and the DNA1 cannot hybridize due to the thymine-thymine (T-T) mismatches. Therefore, hairpin probes with the 3'-protruding terminus can be resistant to Exo III digestion, preventing the G-rich sequence to be released. In the presence of Hg²⁺, the combination of the DNA1 with the 3' end-extruding hairpin A via T-Hg²⁺-T coordination chemistry triggers the digestion reaction of Exo III, leading to the release of the DNA1 and the sequence with domains c, d, and e. Both of the DNA1 and the sequence with domains c, d, and e can combine with other hairpin probes and activate another round of the cleavage reaction. The produced G-rich sequence can form G-quadruplex structure by binding with N-Methyl mesoporphyrin IX (NMM). The biosensor exhibits excellent selectivity and high sensitivity for Hg²⁺. The linear range of this biosensor is from 10 fM to 100 nM, and the linear equation can be expressed as: F₆₁₀ = 1.3 × 10⁵ Lg C + 7.40 × 10⁴ (R² = 0.998), in which F₆₁₀ is the fluorescence intensity at 610 nm, C represents the Hg²⁺ concentrations, and Lg is the logarithm of 10. The detection limit is 10 fM. The biosensor is robust and can be applied to the detection of Hg²⁺ in water samples. By substituting the target-recognition elements, this sensing system can also be used for the detection of other metal ions.

Fluorometric determination of mercury(II) by using thymine-thymine mismatches as recognition elements, toehold binding, and enzyme-assisted signal amplification

A highly sensitive fluorometric method is described for the determination of mercury(II) ions. It is based on (a) the use of a DNA probe containing thymine-thymine mismatches that are employed as Hg(II) recognition elements, (b) subsequent toehold binding, and (c) endocuclease-assisted signal amplification. Target recycling is triggered by exonuclease III. This produces a large amount of ssDNA (defined as primer). Then, the generated primer-initiated strand displacement reaction with the help of polymerase and nicking endonuclease releases the free fluorophore-labelled probe. Under excitation at 532 nm, the fluorescent probe displays emission with a peak at 582 nm. The sensitivity of this method is improved by introduction of nicking endonuclease. The working range of the assay extends from 20 pM to 10 nM, and the detection limit is as low as 6 pM of Hg(II). Graphical abstract Schematic presentation of the fluorometric method for determination of mercury(II). By using a special structure of thymine-thymine mismatches, target-induced toehold binding and enzyme-assisted signal amplification strategy were employed. This method is selective and good performance in real sample application.

Poly(adenine)-mediated DNA-functionalized gold nanoparticles for sensitive detection of mercury ions in aqueous media

In this work, a facile and sensitive colorimetric sensor for Hg2+ ions based on poly (adenine)-mediated DNA-functionalized gold nanoparticles (Au NPs) is reported. One DNA sequence consisting of poly-A and T-rich DNA was designed rationally. Poly-A was used as an anchoring block to bind tightly to Au NPs, and T-rich DNA was utilized for specific recognition of Hg2+ ions. With the assistance of poly-A, T-rich DNA was easily introduced onto the surface of Au NPs and kept an upright orientation. In the presence of Hg2+ ions, T base binding with Hg2+ ions results in the formation of "T-Hg2+-T" among the Au NPs, which caused aggregation of the Au NPs and a subsequent change in the color of the solution, from wine red to grayish blue. On this occasion, the limit of detection (LOD) was 3.75 nM Hg2+ ions with a linear range from 5 nM to 200 nM, as measured by UV-Vis spectroscopy. Moreover, successful application of this method for the detection of Hg2+ ions in real samples was demonstrated.