Physiochemical and physiological mechanisms for the effects of food on drug absorption: the role of lipids and pH

Advances in Nanotechnology for Enhancing the Solubility and Bioavailability of Poorly Soluble Drugs

This manuscript offers a comprehensive overview of nanotechnology's impact on the solubility and bioavailability of poorly soluble drugs, with a focus on BCS Class II and IV drugs. We explore various nanoscale drug delivery systems (NDDSs), including lipid-based, polymer-based, nanoemulsions, nanogels, and inorganic carriers. These systems offer improved drug efficacy, targeting, and reduced side effects. Emphasizing the crucial role of nanoparticle size and surface modifications, the review discusses the advancements in NDDSs for enhanced therapeutic outcomes. Challenges such as production cost and safety are acknowledged, yet the potential of NDDSs in transforming drug delivery methods is highlighted. This contribution underscores the importance of nanotechnology in pharmaceutical engineering, suggesting it as a significant advancement for medical applications and patient care.

Is there a fast track ("Darmstrasse") for fluids in the small intestine? Evidence from magnetic resonance imaging

BACKGROUND

The transit and distribution pattern of fluids in the small intestine is a key parameter for the dissolution and absorption of drugs. Although some information is known about the small intestinal water content after administration of fluid volumes and meals, the intestinal transit of orally ingested fluids and solutions has been barely investigated. The aim of this three-arm, cross-over, 9-subject human study was to investigate the transit of orally ingested water in the small intestine under fasting and postprandial conditions using MRI. To identify the ingested water, manganese gluconate, which can be identified with T1-weighted MRI sequences, was added as a marker. Using Horos (DICOM software), quantification of the distribution of Mn2+ ions in the gastrointestinal tract in fasted versus fed state (standard meal by FDA guidance and a light meal) was possible. The distribution and approximate wetted intestinal length was very similar in the fasting and postprandial states, suggesting rapid transport of water ingested after a meal through the chyme-filled small intestine in continuation of the "Magenstrasse" (stomach road). In some subjects, manganese gluconate reached deeper parts of the small intestine even more quickly in the postprandial state than in the fasting arm of the study. A deeper understanding of the behaviour of solutes in the gastrointestinal tract is fundamental to a mechanistic explanation for the kinetic interaction between food and drug intake (food effects).

Lactic acid bacteria modulate the gastrointestinal digestive behavior of soy glycinin and correlation with its immunoreactivity: a peptidomic study

Lactic acid bacterial fermentation helps reduce the immunoreactivity of soy protein. Nevertheless, the effect of lactic acid bacterial fermentation on a particular soy allergen and the consequent dynamic change of epitopes during gastrointestinal digestion are unclear. In this study, soy glycinin was isolated and an in vitro dynamic gastrointestinal model was established to investigate the dynamic change in the immunoreactivity and peptide profile of unfermented (UG) and fermented glycinin (FG) digestates. The results demonstrated that the FG intestinal digestate had a lower antigenicity (0.08%-0.12%) and IgE-binding capacity (1.49%-3.61%) towards glycinin at the early (I-5) and middle (I-30) stages of gastrointestinal digestion, especially those prepared at 2% (w/v) protein concentration. Peptidomic analysis showed that the glycinin subunits G1 and G2 were the preferred ones to release the most abundant peptides, whereas G2, G4, and G5 had an elevated epitope-cleavage rate in FG at stages I-5 and I-30. Three-dimensional modeling revealed that fermentation-induced differential degradation epitopes in gastrointestinal digestion were predominantly located in the α-helix and β-sheet structures. They were closely correlated with the reduced immunoreactivity of soy glycinin.

Lipid-Based Nanoparticles as Oral Drug Delivery Systems: Overcoming Poor Gastrointestinal Absorption and Enhancing Bioavailability of Peptide and Protein Therapeutics

Delivery and formulation of oral peptide and protein therapeutics have always been a challenge for the pharmaceutical industry. The oral bioavailability of peptide and protein therapeutics mainly relies on their gastrointestinal solubility and permeability which are affected by their poor membrane penetration, high molecular weight and proteolytic (chemical and enzymatic) degradation resulting in limited delivery and therapeutic efficacy. The present review article highlights the challenges and limitations of oral delivery of peptide and protein therapeutics focusing on the application, potential and importance of solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) as lipid-based drug delivery systems (LBDDSs) and their advantages and drawbacks. LBDDSs, due to their lipid-based matrix can encapsulate both lipophilic and hydrophilic drugs, and by reducing the first-pass effect and avoiding proteolytic degradation offer improved drug stability, dissolution rate, absorption, bioavailability and controlled drug release. Furthermore, their small size, high surface area and surface modification increase their mucosal adhesion, tissue-targeted distribution, physiological function and half-life. Properties such as simple preparation, high-scale manufacturing, biodegradability, biocompatibility, prolonged half-life, lower toxicity, lower adverse effects, lipid-based structure, higher drug encapsulation rate and various drug release profile compared to other similar carrier systems makes LBDDSs a promising drug delivery system (DDS). Nevertheless, undesired physicochemical features of peptide and protein drug development and discovery such as plasma stability, membrane permeability and circulation half-life remain a serious challenge which should be addressed in future.

Bioequivalence of Blonanserin Tablets Under Fasting and Fed Conditions in Healthy Chinese Subjects

Blonanserin is a novel oral antischizophrenic drug. Under fasting (n = 50) and fed (n = 60) conditions, this study compared the bioequivalence of the generic blonanserin tablet with the reference blonanserin tablet. In this single-center, randomized, open-label, 2-period, 2-sequence, crossover study, 110 patients were randomly given a 4-mg dose of either the test or reference blonanserin tablet with a 14-day washout period. Blood samples were taken before performing and up to 72 hours following. A validated high-performance liquid chromatography-tandem mass spectrometry technique was used to measure the levels of blonanserin in plasma. Safety was evaluated throughout the study. The study found no significant differences in the maximum observed drug concentration in the plasma (Cmax ), the area under the plasma concentration-time curve from time 0 to the last sampling time (AUC0-t ), and the area under the plasma concentration-time curve from time 0 to infinity (AUC0-∞ ) between the 2 blonanserin formulations. The 90% confidence intervals of the geometric mean ratio of the test/reference formulations for Cmax , AUC0-t , and AUC0-∞ were within the 80%-125% limit. Food dramatically raised blonanserin exposure, and also significantly prolonged the lag time of absorption. No serious adverse events occurred. These results indicate that the 2 blonanserin formulations were bioequivalent and well tolerated in healthy Chinese subjects. In clinical treatment, it is necessary to consider the food effect of blonanserin.

Rectal delivery of 89Zr-labeled infliximab-loaded nanoparticles enables PET imaging-guided localized therapy of inflammatory bowel disease

Inflammatory bowel diseases (IBDs) like Crohn's disease and ulcerative colitis involve chronic gastrointestinal inflammation. The pro-inflammatory cytokine tumor necrosis factor-alpha (TNF-α) drives IBD pathogenesis. Anti-TNF-α therapies using monoclonal antibodies (mAbs) like infliximab (INF) help treat IBD but have limitations. We developed inflammation-targeting polyphenol-poloxamer nanoparticles loaded with the anti-inflammatory mAb INF (INF@PPNP) as a novel IBD therapy. Characterization showed that INF@PPNP had favorable stability and purity. Radiolabeling INF@PPNP with 89Zr enabled tracking localization with positron emission tomography (PET) imaging. Rectal administration of 89Zr-INF@PPNP led to colon delivery with remarkably reduced systemic exposure versus intravenous INF revealed by non-invasive PET imaging. 89Zr-INF@PPNP retention at inflamed foci indicated prolonged INF@PPNP action. INF@PPNP rectally achieved similar anti-inflammatory effects as intravenously injected INF, demonstrating the high therapeutic potential. Our findings support the use of nanoparticle-based rectal administration for localized drug delivery, prolonging drug activity and minimizing systemic exposure, ultimately offering an effective approach for treating IBD.

Analysis of the interplay of physiological response to food intake and drug properties in food-drug interactions

The effect of food on oral drug absorption is determined by the complex interplay among gut physiological factors and drug properties. The currently used dissolution testing and classification systems (biopharmaceutics classification system, BCS or biopharmaceutics drug disposition classification system, BDDCS) do not account for dynamic changes in gastrointestinal physiology caused by food intake. This study aimed to identify key drug properties that influence food effect (FE) using supervised machine learning approaches. The analysis showed that drugs with high logP, dose number, and extraction ratio have a higher probability of positive FE, while drugs with low permeability and high efflux saturation index have a greater likelihood of negative FE. Weakly acidic drugs also showed a greater probability of positive FE, particularly at pKa >4.3. The importance of drug properties in predicting FE was ranked as logP, dose number, extraction ratio, pKa, and permeability. The accuracy of FE prediction using the models was compared with BCS and extended clearance classification system (ECCS). Overall, the likelihood or magnitude of FE depends on physiological changes to food intake such as altered bile acid secretion rate, intestinal metabolism, transport kinetics, and gastric emptying time, which should be considered along with drug properties (e.g., solubility, logP, and ionization) in predicting FE of orally administered drugs.

The Pharmacokinetic Profile of Palovarotene: An Open-Label Phase I Trial Investigating the Effect of Food and Potential for Drug-Drug Interaction in Healthy Participants

BACKGROUND AND OBJECTIVES

Palovarotene is under development for the treatment of fibrodysplasia ossificans progressiva (FOP). The objectives of this study were to evaluate palovarotene pharmacokinetics under fed versus fasted conditions and its induction potential towards cytochrome P450 3A4 (CYP3A4) substrate, midazolam.

METHODS

In this phase I, open-label trial (NCT04829773), palovarotene pharmacokinetics were characterized after repeated once-daily dosing. In one cohort, healthy participants received three doses of palovarotene 20 mg on Days 1, 6, and 11, as whole capsules under fasted or fed conditions, or sprinkled on food under fed conditions. In another cohort, individuals received midazolam 2 mg on Days 1 and 15 and a daily dose of palovarotene 20 mg on Days 2-15. Palovarotene and midazolam pharmacokinetics, including area under the concentration-time curve from time zero to infinity (AUC(0-∞)) and maximum observed plasma drug concentration (Cmax), were assessed. Adverse events (AEs) were recorded.

RESULTS

Overall, 23 participants completed each part. Palovarotene Cmax and AUC(0-∞) increased by 16.5% and 39.7% under fed versus fasted conditions. Pharmacokinetics were comparable between the whole capsule and sprinkled on food, under fed conditions. Midazolam AUC(0-∞) and Cmax decreased by 13.3% and 9.7% upon palovarotene co-administration over 14 days, less than that required to be considered a weak CYP3A4 inducer. Plasma palovarotene exposures were comparable after single and multiple doses. No serious AEs were reported.

CONCLUSIONS

These data support palovarotene administration after a meal, as a whole capsule or sprinkled on food. Palovarotene at 20 mg/day is a not a clinical inducer of CYP3A4. These results provide insights into palovarotene pharmacokinetics, aiding optimization of administration for patients with FOP.

CLINICAL TRIALS REGISTRATION NUMBER

NCT04829773.

Evaluation of the oral bioaccessibility of legacy and emerging brominated flame retardants in indoor dust

Indoor dust is the main source of human exposure to brominated flame retardants (BFRs). In this study, in vitro colon-extended physiologically-based extraction test (CE-PBET) with Tenax as a sorptive sink was applied to evaluate the oral bioaccessibility of twenty-two polybrominated diphenyl ethers (PBDEs) and seven novel BFRs (NBFRs) via indoor dust ingestion. The mean bioaccessibilities of two NBFRs pentabromotoluene (PBT) and 1,2-Bis(2,4,6-tribromophenoxy) ethane (BTBPE) were first proposed, reaching 36.0% and 26.7%, respectively. In order to maintain homeostasis of the gastrointestinal tract, 0.4 g Tenax was added in CE-PEBT, which increased BFRs bioaccessibility by up to a factor of 1.4-1.9. The highest bioaccessibility of legacy PBDEs was tri-BDEs (73.3%), while 2-ethylhexyl-tetrabromo-benzoate (EHTBB), one of penta-BDE alternatives, showed the highest (62.2%) among NBFRs. The influence of food nutrients, liquid to solid (L/S) ratio, and octanol-water partition coefficient (Kow) on bioaccessibility was assessed. The oral bioaccessibility of BFRs increased with existence of protein or carbohydrate while lipid did the opposite. The bioaccessibilities of PBDEs and NBFRs were relatively higher with 200:1 L/S ratio. PBDEs bioaccessibility generally decreased with increasing LogKow. No significant correlation was observed between NBFRs bioaccessibility and LogKow. This study comprehensively evaluated the bioaccessibilities of legacy and emerging BFRs via dust ingestion using Tenax-assisted CE-PBET, and highlighted the significance to fully consider potential influencing factors on BFRs bioaccessibility in further human exposure estimation.

Real-World Evidence of Factors Affecting Cannabidiol Exposure in Children with Drug-Resistant Developmental and Epileptic Encephalopathies

The identification of factors that affect cannabidiol (CBD) systemic exposure may aid in optimizing treatment efficacy and safety in clinical practice. In this study, we aimed to correlate CBD plasma concentrations at a steady state to demographic, clinical, and pharmacological characteristics as well as seizure frequency after the administration of a purified CBD oil solution in a real-world setting of children with drug-resistant developmental and epileptic encephalopathies (DEEs). Patients receiving oral CBD pharmaceutical products at maintenance were enrolled. Venous blood samples were drawn before the CBD morning dose, 12 h apart from the last evening dose (C0 or CBD trough concentration). A linear mixed-effect analysis was implemented to assess the correlation between C0 and clinical, laboratory, pharmacological, and lifestyle factors. Fifteen females and seven males with a median age of 12.8 years (ranging between 4.7 and 17.2) were included. The median CBD dose was 8.8 mg/kg/day (ranging between 2.6 and 22.5), and the CBD C0 median (range) was 48.2 ng/mL (3.5-366.3). The multivariate model showed a 109.6% increase in CBD C0 in patients with concomitant levothyroxine (β = 0.74 ± 0.1649, p < 0.001), 56.8% with food (β = 0.45 ± 0.1550, p < 0.01), and 116.0% after intake of a ketogenic diet (β = 0.77 ± 0.3141, p < 0.05). All patients included were responders without evidence of an association between C0 and response status. In children with DEEs, systemic concentrations of CBD may be significantly increased when co-administered with levothyroxine, food, or a ketogenic diet.

Effect of Food on the Pharmacokinetics and Pharmacodynamics of a Novel Dual Delayed-Release Formulation of Esomeprazole in Healthy Subjects

A novel dual delayed-release formulation (DR) of esomeprazole was developed to prolong the effect of esomeprazole inhibiting gastric acid secretion. This study investigated the effect of food on the pharmacokinetics (PK) and pharmacodynamics (PD) of DR esomeprazole. A randomized, open-label, single-dose, 2-period, 2-sequence crossover study was conducted in healthy Korean subjects. Subjects were orally administered a single dose of 40- mg DR esomeprazole in fasted and fed states in each period. PK and PD characteristics evaluated through continuous 24-hour intragastric pH monitoring in fasted and fed states were compared between the 2 conditions. A total of 23 subjects completed the study and were included in the PK analysis. PD analysis was conducted in 21 subjects, excluding 2 subjects, because of inappropriate pH profiles. The systemic exposure of esomeprazole after a single dose of DR esomeprazole in the fed state decreased compared to that in the fasted state. However, the percentage decrease from baseline in integrated gastric acidity and the percentage of time at pH ≥4 were not significantly different between the 2 conditions. In conclusion, although the systemic exposure of esomeprazole decreased when DR esomeprazole was administered in the fed state compared to that in the fasted state, the degree of gastric acid secretion inhibition was not clinically different, regardless of food intake.

Fed- and Fasted-State Performance of Pretomanid Amorphous Solid Dispersions Formulated with an Enteric Polymer

Weakly acid polymers with pH-responsive solubility are being used with increasing frequency in amorphous solid dispersion (ASD) formulations of drugs with low aqueous solubility. However, drug release and crystallization in a pH environment where the polymer is insoluble are not well understood. The aim of the current study was to develop ASD formulations optimized for release and supersaturation longevity of a rapidly crystallizing drug, pretomanid (PTM), and to evaluate a subset of these formulations in vivo. Following screening of several polymers for their ability to inhibit crystallization, hypromellose acetate succinate HF grade (HPMCAS-HF; HF) was selected to prepare PTM ASDs. In vitro release studies were conducted in simulated fasted- and fed-state media. Drug crystallization in ASDs following exposure to dissolution media was evaluated by powder X-ray diffraction, scanning electron microscopy, and polarized light microscopy. In vivo oral pharmacokinetic evaluation was conducted in male cynomolgus monkeys (n = 4) given 30 mg PTM under both fasted and fed conditions in a crossover design. Three HPMCAS-based ASDs of PTM were selected for fasted-state animal studies based on their in vitro release performance. Enhanced bioavailability was observed for each of these formulations relative to the reference product that contained crystalline drug. The 20% drug loading PTM-HF ASD gave the best performance in the fasted state, with subsequent dosing in the fed state. Interestingly, while food improved drug absorption of the crystalline reference product, the exposure of the ASD formulation was negatively impacted. The failure of the HPMCAS-HF ASD to enhance absorption in the fed state was hypothesized to result from poor release in the reduced pH intestinal environment resulting from the fed state. In vitro experiments confirmed a reduced release rate under lower pH conditions, which was attributed to reduced polymer solubility and an enhanced crystallization tendency of the drug. These findings emphasize the limitations of in vitro assessment of ASD performance using standardized media conditions. Future studies are needed for improved understanding of food effects on ASD release and how this variability can be captured by in vitro testing methodologies for better prediction of in vivo outcomes, in particular for ASDs formulated with enteric polymers.

Stereocomplexed microparticles loaded with Salvia cadmica Boiss. extracts for enhancement of immune response towards Helicobacter pylori

Controlled delivery of therapeutic substance gives numerous advantages (prevents degradation, improves uptake, sustains concentration, lowers side effects). To encapsulate Salvia cadmica extracts (root or aerial part), enriched with polyphenols with immunomodulatory activity, in stereocomplexed microparticles (sc-PLA), for using them to enhance the immune response towards gastric pathogen Helicobacter pylori. Microparticles were made of biodegradable poly(lactic acid) (PLA) and poly(D-lactic acid) (PDLA). Their stereocomplexation was used to form microspheres and enhance the stability of the obtained particles in acidic/basic pH. The release of Salvia cadmica extracts was done in different pH (5.5, 7.4 and 8.0). The obtained polymers are safe in vitro and in vivo (guinea pig model). The sc-PLA microparticles release of S. cadmica extracts in pH 5.5, 7.4, and 8.0. S. cadmica extracts enhanced the phagocytic activity of guinea pig bone marrow-derived macrophages, which was diminished by H. pylori, and neutralized H. pylori driven enhanced production of tumor necrosis factor (TNF)-α and interleukin (IL)-10. The sc-PLA encapsulated S. cadmica extracts can be recommended for further in vivo study in guinea pigs infected with H. pylori to confirm their ability to improve an immune response towards this pathogen.

Estimation of Pediatric Dosage of Antimalarial Drugs, Using Pharmacokinetic and Physiological Approach

Most of the individuals who die of malaria in sub-Saharan Africa are children. It is, therefore, important for this age group to have access to the right treatment and correct dose. Artemether-lumefantrine is one of the fixed dose combination therapies that was approved by the World Health Organization to treat malaria. However, the current recommended dose has been reported to cause underexposure or overexposure in some children. The aim of this article was, therefore, to estimate the doses that can mimic adult exposure. The availability of more and reliable pharmacokinetic data is essential to accurately estimate appropriate dosage regimens. The doses in this study were estimated using the physiological information from children and some pharmacokinetic data from adults due to the lack of pediatric pharmacokinetic data in the literature. Depending on the approach that was used to calculate the dose, the results showed that some children were underexposed, and others were overexposed. This can lead to treatment failure, toxicity, and even death. Therefore, when designing a dosage regimen, it is important to know and include the distinctions in physiology at various phases of development that influence the pharmacokinetics of various drugs in order to estimate the dose in young children. The physiology at each time point during the growth of a child may influence how the drug is absorbed, gets distributed, metabolized, and eliminated. From the results, there is a very clear need to conduct a clinical study to further verify if the suggested (i.e., 0.34 mg/kg for artemether and 6 mg/kg for lumefantrine) doses could be clinically efficacious.

Interaction of polymers with bile salts - Impact on solubilisation and absorption of poorly water-soluble drugs

Formulating poorly soluble drugs with polymers in the form of solid dispersions has been widely used for improving drug dissolution. Endogenous surface-active species present in the gut, such as bile salts, lecithin and other phospholipids, have been shown to play a key role in facilitating lipids and poorly soluble drugs solubilisation in the gut. In this study, we examined the possible occurrence of interactions between a model bile salt, sodium taurocholate (NaTC), and model spray dried solid dispersions comprising piroxicam and Hydroxypropyl Methylcellulose (HPMC), a commonly used hydrophilic polymer for solid dispersion preparation. Solubility measurements revealed the good solubilisation effect of NaTC on the crystalline drug, which was enhanced by the addition of HPMC, and further boosted by the drug formulation into solid dispersion. The colloidal behaviour of the solid dispersions upon dissolution in biorelevant media, with and without NaTC, revealed the formation of NaTC-HPMC complexes and other mixed colloidal species. Cellular level drug absorption studies obtained using Caco-2 monolayers confirmed that the combination of drug being delivered by solid dispersion and the presence of bile salt and lecithin significantly contributed to the improved drug absorption. Together with the role of NaTC-HPMC complexes in assisting the drug solubilisation, our results also highlight the complex interplay between bile salts, excipients and drug absorption.

Effect of Food on the Pharmacokinetics and Safety of a Novel c-Met Inhibitor SCC244: A Randomized Phase I Study in Healthy Subjects

Objective

This study aimed to investigate the effect of food on the pharmacokinetics and safety profiles of SCC244, a novel oral c-Met inhibitor in healthy Chinese male subjects.

Methods

It was a randomized, open-label, and 3-period crossover design, single-dose phase I clinical trial. A total of 18 healthy male subjects were enrolled. These subjects received a single oral 300 mg dose of SCC244 with a 14-day washout between each period. Blood samples were collected at the designated time points and determined using a validated liquid chromatography tandem mass spectrometry method. Pharmacokinetic parameters were calculated by noncompartmental methods. Tolerability was assessed by physical examination, vital sign measurements, 12-lead ECG, clinical laboratory tests, and adverse events (AEs) monitoring throughout the study.

Results

Eighteen eligible subjects were enrolled in the study. The ratios (90% CI) of C_max values for SCC244 in high-fat and low-fat meal states to that observed in fasted state were 194.8% (174.3-217.7%) and 194.6% (174.1-217.5%), respectively. The ratios of AUC_0-t and AUC_0-inf in the high-fat meal state versus the fasted state were 237.4% (208.7-270.0%) and 235.9% (207.5-268.3%), respectively. The ratios of AUC_0-t and AUC_0-inf in the low-fat meal state versus the fasted state were 219.2% (192.7-249.3%) and 218.3% (192.0-248.3%), respectively. Median T_max values and mean t_1/2 were similar in all groups. The most common AEs were headache, blood fibrinogen decreased, head discomfort, dizziness, and protein urine presence. All AEs were Common Terminology Criteria for Adverse Events (CTCAE) grade 1 (except 1 case of grade 2) and have resolved by the end of the study.

Conclusion

The bioavailability of the tablet formulation of SCC244 was significantly increased when administered with high- and low-fat meals. However, the meals did not affect the median T_max and t_1/2. Safety under different fed conditions was comparable to fasted conditions in this study.

Fast Responsive, Reversible Colorimetric Nanoparticle-Hydrogel Complexes for pH Monitoring

Hydrogels containing redox-sensitive colorimetric nanoparticles (NPs) have been used to sense ambient pH in many fields owing to their simple and fast visualization capabilities. However, real-time pH monitoring still has limitations due to its poor response rate and irreversibility. Herein, we developed a fast responsive colorimetric hydrogel called ferrocene adsorption colorimetric hydrogel (FACH). Ferrocene, an organometallic compound, plays a vital role as an electron transfer mediator (i.e., redox catalyst) within the hydrogel network. FACH shows fast color change performance with high reactivity and penetrability to ambient pH changes. In detail, FACH shows distinct color change within 2 min under various pH conditions from four to eight, with good reliability. The speed for color change of FACH is approximately six times faster than that of previously developed colorimetric hydrogels, suggesting the fastest hydrogel-based colorimetric pH sensor. Furthermore, FACH shows reversibility and repeatability of the redox process, indicating scalable utility as a sustainable pH monitoring platform.

Polymer-coated BiOCl nanosheets for safe and regioselective gastrointestinal X-ray imaging

Bismuth-based compounds are considered to be the best candidates for computed tomography (CT) imaging of gastrointestinal (GI) tract due to high X-ray absorption. Here, we report the introduction of polymer-coated bismuth oxychloride (BiOCl) nanosheets for highly efficient CT imaging in healthy mice and animal with colitis. We demonstrate simple, low cost and fast aqueous synthesis protocol which provides gram-quantity yield of chemically stable BiOCl nanosheets. The developed contrast gives 2.55-fold better CT enhancement compared to conventional contrast with negligible in vivo toxicity. As a major finding we report a regioselective CT imaging of GI tract by using nanoparticles coated with differentially charged polymers. Coating of nanoparticles with a positively charged polymer leads to their fast accumulation in small intestine, while the coating with negatively charged polymers stimulates prolonged stomach retention. We propose that this effect may be explained by a pH-controlled aggregation of nanoparticles in stomach. This feature may become the basis for advancement in clinical diagnosis of entire GI tract.

Extrusion and 3D printing of novel lipid-polymer blends for oral drug applications

Lipids are interesting biological materials that can offer a number of pharmaceutical benefits when used as carriers for drug delivery. However, 3D printing of lipids alone by fused deposition processing techniques is very difficult as they have very poor mechanical properties that cause their filaments to fail when they are loaded into a fused deposition 3D printer. If this problem could be overcome, then lipids could be 3D printed into bespoke tablets and assist progress towards such personalised medicines. This work aims to improve the mechanical properties of lipid filaments by developing novel lipid-EVA (ethylene vinyl acetate) blends suitable for 3D printing. Different types of lipids in varying proportions were melt blended with EVA and extruded using a micro compounder. The ultimate printability of the materials was tested by feeding the filaments into a material extrusion 3D printer. Flexural testing of the extruded blends demonstrates that a good balance between the strength and flexibility is required for a material to be printable and it was found that a filament has to have a modulus/strength ratio between 8 and 25 in order to be printable. SEM analysis of the fracture surface shows a network structure within the lipid matrix that could be playing a role in the improved properties of the best performing blends. DSC thermograms show a shift in thermal transitions, suggesting some level of miscibility of the components that could have contributed to a more robust structure. The TGA results show an onset of degradation of the blends greater than 200 °C, indicating that the materials can readily withstand the extrusion and printing temperatures. This study demonstrates the successful extrusion and 3D printing of novel EVA-lipid blends with lipid contents of up to 90%.

Bio-enabling strategies to mitigate the pharmaceutical food effect: a mini review

The concomitant administration of oral drugs with food can result in significant changes in bioavailability, leading to variable pharmacokinetics and considerable clinical implications, such as over- or under-dosing. Consequently, there is increasing demand for bio-enabling formulation strategies to reduce variability in exposure between the fasted and fed state and/or mitigate the pharmaceutical food effect. The current review critically evaluates technologies that have been implemented to overcome the positive food effects of pharmaceutical drugs, including, lipid-based formulations, nanosized drug preparations, cyclodextrins, amorphisation and solid dispersions, prodrugs and salts. Additionally, improved insight into preclinical models for predicting the food effect is provided. Despite the wealth of research, this review demonstrates that application of optimal formulation strategies to mitigate the positive food effects and the evaluation in preclinical models is not a universal approach, and improved standardisation of models to predict the food effects would be desirable. Ultimately, the successful reformulation of specific drugs to eliminate the food effect provides a panoply of advantages for patients with regard to clinical efficacy and compliance.

Using in vitro ADME data for lead compound selection: An emphasis on PAMPA pH 5 permeability and oral bioavailability

Membrane permeability plays an important role in oral drug absorption. Caco-2 and Madin-Darby Canine Kidney (MDCK) cell culture systems have been widely used for assessing intestinal permeability. Since most drugs are absorbed passively, Parallel Artificial Membrane Permeability Assay (PAMPA) has gained popularity as a low-cost and high-throughput method in early drug discovery when compared to high-cost, labor intensive cell-based assays. At the National Center for Advancing Translational Sciences (NCATS), PAMPA pH 5 is employed as one of the Tier I absorption, distribution, metabolism, and elimination (ADME) assays. In this study, we have developed a quantitative structure activity relationship (QSAR) model using our ∼6500 compound PAMPA pH 5 permeability dataset. Along with ensemble decision tree-based methods such as Random Forest and eXtreme Gradient Boosting, we employed deep neural network and a graph convolutional neural network to model PAMPA pH 5 permeability. The classification models trained on a balanced training set provided accuracies ranging from 71% to 78% on the external set. Of the four classifiers, the graph convolutional neural network that directly operates on molecular graphs offered the best classification performance. Additionally, an ∼85% correlation was obtained between PAMPA pH 5 permeability and in vivo oral bioavailability in mice and rats. These results suggest that data from this assay (experimental or predicted) can be used to rank-order compounds for preclinical in vivo testing with a high degree of confidence, reducing cost and attrition as well as accelerating the drug discovery process. Additionally, experimental data for 486 compounds (PubChem AID: 1645871) and the best models have been made publicly available (https://opendata.ncats.nih.gov/adme/).

Advanced Analytical Tools for the Estimation of Gut Permeability of Compounds of Pharmaceutical Interest

The present study aims at developing a quantitative structure–activity relationship (QSAR) model for the determination of gut permeability of 228 pharmacological drugs at different pH conditions (3, 5, 7.4, 9, intrinsic). As a consequence, five different datasets (according to the diverse permeability shown by the compounds at the different pH values) were handled, with the aim of discriminating compounds as low-permeable or high-permeable. In order to achieve this goal, molecular descriptors for all the investigated compounds were computed and then classification models calculated by means of partial least squares discriminant analysis (PLS-DA). A high predictive capability was achieved for all models, providing correct classification rates in external validation between 80% and 96%. In order to test whether a reduction in the molecular descriptors would improve predictions and provide information about the most relevant variables, a feature selection approach, covariance selection, was used to select the most relevant subsets of predictors. This led to a slight improvement in the predictive accuracies, and it has indicated that the most relevant descriptors for the discrimination of the investigated compounds into low- and high-permeable were associated with the 2D and 3D structures.

Solidification of Self-Emulsifying Drug Delivery Systems as a Novel Approach to the Management of Uncomplicated Malaria

Malaria affects millions of people annually, especially in third-world countries. The mainstay of treatment is oral anti-malarial drugs and vaccination. An increase in resistant strains of malaria parasites to most of the current anti-malarial drugs adds to the global burden. Moreover, existing and new anti-malarial drugs are hampered by significantly poor aqueous solubility and low permeability, resulting in low oral bioavailability and patient noncompliance. Lipid formulations are commonly used to increase solubility and efficacy and decrease toxicity. The present review discusses the findings from studies focusing on specialised oral lipophilic drug delivery systems, including self-emulsifying drug delivery systems (SEDDSs). SEDDSs facilitate the spontaneous formation of liquid emulsions that effectively solubilise the incorporated drugs into the gastrointestinal tract and thereby improve the absorption of poorly-soluble anti-malaria drugs. However, traditional SEDDSs are normally in liquid dosage forms, which are delivered orally to the site of absorption, and are hampered by poor stability. This paper discusses novel solidification techniques that can easily and economically be up-scaled due to already existing industrial equipment that could be utilised. This method could, furthermore, improve product stability and patient compliance. The possible impact that solid oral SEDDSs can play in the fight against malaria is highlighted.

Exploring the Relationship of Drug BCS Classification, Food Effect, and Gastric pH-Dependent Drug Interactions

Food effect (FE) and gastric pH-dependent drug-drug interactions (DDIs) are both absorption-related. Here, we evaluated if Biopharmaceutics Classification System (BCS) classes may be correlated with FE or pH-dependent DDIs. Trends in FE data were investigated for 170 drugs with clinical FE studies from the literature and new drugs approved from 2013 to 2019 by US Food and Drug Administration. A subset of 38 drugs was also evaluated to determine whether FE results can inform the need for a gastric pH-dependent DDI study. The results of FE studies were defined as no effect (AUC ratio 0.80-1.25), increased exposure (AUC ratio ≥1.25), or decreased exposure (AUC ratio ≤0.8). Drugs with significantly increased exposure FE (AUC ratio ≥2.0; N=14) were BCS Class 2 or 4, while drugs with significantly decreased exposure FE (AUC ratio ≤0.5; N=2) were BCS Class 1/3 or 3. The lack of FE was aligned with the lack of a pH-dependent DDI for all 7 BCS Class 1 or 3 drugs as expected. For the 13 BCS Class 2 or 4 weak base drugs with an increased exposure FE, 6 had a pH-dependent DDI (AUC ratio ≤0.8). Among the 16 BCS Class 2 or 4 weak base drugs with no FE, 6 had a pH-dependent DDI (AUC ratio ≤0.8). FE appears to have limited correlation with BCS classes except for BCS Class 1 drugs, confirming that multiple physiological mechanisms can impact FE. Lack of FE does not indicate absence of pH-dependent DDI for BCS Class 2 or 4 drugs. Graphical Abstract.

Orodispersible Films: A Delivery Platform for Solid Lipid Nanoparticles?

To overcome the poor bioavailability observed for many newly developed active pharmaceutical ingredients (APIs), an appropriate formulation strategy is necessary. One approach is the formulation of these substances in solid lipid nanoparticles and their further processing into solid dosage forms. A promising and innovative oral delivery platform could be orodispersible films (ODFs). ODFs were already investigated more closely, e.g., for the administration of API nanoparticles, and proved their suitability for this formulation approach. The current study was aimed at investigating if the HPMC (hydroxypropyl methyl cellulose) film matrix is also suitable to serve as an appropriate delivery platform for solid lipid nanoparticles. Dependent on the type of triglyceride nanoparticles embedded in the film matrix and the formulation of the lipid particles, lipid contents of up to 54 wt.% could be realized in the film matrix without the loss of the nanoparticulate state. Good mechanical properties were confirmed for these films by determining the tensile strength as well as the elongation before breakage. Interestingly, processing of a lipid suspension into this solid dosage form led to a significantly reduced transformation of the lipid particles from the metastable α- into the stable β-polymorph. This could prove very beneficial when the lipid particles are loaded with APIs.

Lipid-based formulations to increase cannabidiol bioavailability: In vitro digestion tests, pre-clinical assessment and clinical trial

Herein, medium-chain triglycerides (MCT), glyceryl monolinoleate (GML), and a self-emulsifying drug delivery system (SEDDS) for cannabidiol (CBD) delivery were compared using in vitro and in vivo (mouse and human) studies. In vitro digestion tests showed that SEDDS yielded the highest CBD recovery in the aqueous phase (86 ± 2%), followed by GML (13 ± 2%) and MCT (5.6% ± 0.8%). In vivo tests (mouse) revealed that SEDDS promoted the highest CBD exposure, exhibiting an area under the plasma concentration-time curve (AUC_0-6h) 1.48 times greater than GML and 3.97 times greater than that of the MCT formulation. A single-dose, open-label, crossover study performed in 11 volunteers showed that SEDDS increased CBD AUC_0-12h by 1.12 and 1.48 times in relation to GML and MCT, respectively. The in vitro-in vivo correlation was r² 0.75 for mice and r² 0.66 for humans. The AUC correlation between mice and humans was 0.98. Collectively, these results indicate that the lipid profile substantially influences CBD delivery and highlights the potential of the SEDDS and GML formulations as candidate solutions for increasing CBD AUC and bioavailability.

Improved Bioavailability of Poorly Soluble Drugs through Gastrointestinal Muco-Adhesion of Lipid Nanoparticles

Gastrointestinal absorption remains indispensable in the systemic delivery of most drugs, even though it presents several challenges that, paradoxically, may also provide opportunities that can be exploited to achieve maximal bioavailability. Drug delivery systems made from nanoparticle carriers and especially, lipid carriers, have the potential to traverse gastrointestinal barriers and deploy in the lymphatic pathway, which aptly, is free from first pass via the liver. Several poorly soluble drugs have presented improved systemic bioavailability when couriered in lipid nanoparticle carriers. In this review, we propose an additional frontier to enhancing the bioavailability of poorly soluble drugs when encapsulated in lipid nano-carriers by imparting muco-adhesion to the particles through application of appropriate polymeric coating to the lipid carrier. The combined effect of gastrointestinal muco-adhesion followed by lymphatic absorption is a promising approach to improving systemic bioavailability of poorly soluble drugs following oral administration. Evidence to the potential of this approach is backed-up by recent studies within the review.

Towards virtual bioequivalence studies for oral dosage forms containing poorly water-soluble drugs: a physiologically based biopharmaceutics modeling (PBBM) approach

The objective of the present study was to develop a physiologically based biopharmaceutics (PBBM) approach to predict the bioequivalence of dosage forms containing poorly soluble drugs. Aripiprazole and enzalutamide were used as model drugs. Variations in the gastrointestinal (GI) physiological parameters of fasted humans were taken into consideration in in vitro biorelevant dissolution testing and in an in silico PBBM simulations. To estimate bioequivalence between dosage forms, the inter-individual variabilities in their performance in virtual human subjects were predicted from the in vitro studies and variability in e.g. gastric emptying and fluid volume in the stomach was also taken into account. Formulations with different in vitro dissolution performance, a solution and a tablet formulation, were used in order to evaluate the accuracy of bioequivalence prediction using the PBBM approach. The bioequivalence parameters, i.e. geometric mean ratio and 90% confidence interval, for both drugs were predicted well in the virtual studies. In order to achieve even more precise predictions, it will be important to continue characterizing GI physiological parameters, along with their variabilities, on both an inter-subject and inter-occasion basis.

Meta-Analysis of Food Effect on Oral Absorption of Efflux Transporter Substrate Drugs: Does Delayed Gastric Emptying Influence Drug Transport Kinetics?

The oral route of drug administration is the most convenient method of drug delivery, but it is associated with variable bioavailability. Food is one of the major factors that affect oral drug absorption by influencing drug properties (e.g., solubility and dissolution rate) and physiological factors (e.g., metabolism and transport across the gastrointestinal tract). The aim of this work was to investigate the effect of food on the high-affinity intestinal efflux transporter substrate drugs. We hypothesized that transport efficiency is higher in the fed state as compared to the fasted state because of the lower intestinal lumen drug concentration due to prolonged gastric emptying time. A systematic analysis of reported clinical food-effect (FE) studies on 311 drugs was performed and the association of the efflux transport efficiency was investigated on the FE magnitude, i.e., changes in maximal plasma concentration and area under the plasma concentration-time profile curve for both solubility and permeability-limited drugs. In total, 124 and 88 drugs showed positive and negative FE, respectively, whereas 99 showed no FE. As expected, the solubility-limited drugs showed positive FE, but interestingly, drugs with a high potential for efflux transport, were associated with negative FE. Moreover, a high-fat diet was associated with a higher magnitude of negative FE for high-affinity efflux transporter substrates as compared to a low-fat diet. To account for changes in drug absorption after food intake, the prolonged gastric emptying time should be considered in the physiologically based pharmacokinetic (PBPK) modeling of orally absorbed efflux transporter substrate drugs.

Structured edible lipid-based particle systems for oral drug-delivery

Oral administration is the most popular and patient-compliant route for drug delivery, though it raises great challenges due to the involvement of the gastro-intestine (GI) system and the drug bioavailability. Drug bioavailability is directly related to its ability to dissolve, transport and/or absorb through the physiological environment. A great number of drugs are characterized with low water solubility due to their hydrophobic nature, thus limiting their oral bioavailability and clinical use. Therefore, new strategies aiming to provide a protective shell through the GI system and improve drug solubility and permeability in the intestine were developed to overcome this limitation. Lipid-based systems have been proposed as good candidates for such a task owing to their hydrophobic nature which allows high drug loading, drug micellization ability during intestinal digestion due to the lipid content, and the vehicle physical protective environment. The use of edible lipids with high biocompatibility paves the bench-to-bedside translation. Four main types of structured lipid-based drug delivery systems differing in the physical state of the lipid phase have been described in the literature, namely emulsions, solid lipid nanoparticles, nanostructured lipid carriers, and oleogel-based particles. The current review provides a comprehensive overview of the different structured edible lipid-based oral delivery systems investigated up to date and emphasizes the contribution of each system component to the delivery performance, and the oral delivery path of lipids.

Switchability and minimal effect of food on pharmacokinetics of modified release tablet strengths of omecamtiv mecarbil, a cardiac myosin activator

Omecamtiv mecarbil (OM) is a cardiac myosin activator in clinical development for the treatment of heart failure. The effect of food on the pharmacokinetics (PK) of 25, 37.5, and 50 mg strength modified release (MR) tablets and the bioequivalence of two 25 mg tablets versus one 50 mg MR tablet were evaluated in two open-label, randomized, cross-over studies in healthy subjects. Subjects received two 25 mg tablets or one 50 mg OM MR tablet under fed or fasted states in Study 1 (n = 39), and single oral doses of 25 and 37.5 mg OM MR tablets and to assess its relative bioavailability to the 25 mg MR tablet, a 25 mg oral solution under fed or fasted states in Study 2 (n = 34). The area under the concentration-time curve (AUC) and the maximum observed concentration (C_max ) of 25, 37.5, or 50 mg OM MR tablets were approximately 13%-22% higher and 31%-40% higher, respectively, when taken with food. The two 25 mg and one 50 mg OM MR tablets were bioequivalent (90% confidence intervals) of the geometric mean ratios for C_max and AUC of OM were within 0.8-1.25 under the fasted or fed state. OM was well tolerated and all treatment-emergent events were mild in severity and resolved by the end of the study. In conclusion, these studies demonstrated that the effect of food on the PK of OM was minimal at all three studied strengths of the MR tablets, and two 25 mg MR tablets may be switched for one 50 mg MR tablet (EudraCT Number: 2019-003683-44).

Use of Physiologically Based Pharmacokinetic Modeling for Predicting Drug-Food Interactions: Recommendations for Improving Predictive Performance of Low Confidence Food Effect Models

Food can alter drug absorption and impact safety and efficacy. Besides conducting clinical studies, in vitro approaches such as biorelevant solubility and dissolution testing and in vivo dog studies are typical approaches to estimate a drug's food effect. The use of physiologically based pharmacokinetic models has gained importance and is nowadays a standard tool for food effect predictions at preclinical and clinical stages in the pharmaceutical industry. This manuscript is part of a broader publication from the IQ Consortium's food effect physiologically based pharmacokinetic model (PBPK) modeling working group and complements previous publications by focusing on cases where the food effect was predicted with low confidence. Pazopanib-HCl, trospium-Cl, and ziprasidone-HCl served as model compounds to provide insights into why several food effect predictions failed in the first instance. Furthermore, the manuscript depicts approaches whereby PBPK-based food effect predictions may be improved. These improvements should focus on the PBPK model functionality, especially better reflecting fasted- and fed-state gastric solubility, gastric re-acidification, and complex mechanisms related to gastric emptying of drugs. For improvement of in vitro methodologies, the focus should be on the development of more predictive solubility, supersaturation, and precipitation assays. With regards to the general PBPK modeling methodology, modelers should account for the full solubility profile when modeling ionizable compounds, including common ion effects, and apply a straightforward strategy to account for drug precipitation.

Model-Informed Optimization of a Pediatric Clinical Pharmacokinetic Trial of a New Spironolactone Liquid Formulation

Quantitative pharmacology brings important advantages in the design and conduct of pediatric clinical trials. Herein, we demonstrate the application of a model-based approach to select doses and pharmacokinetic sampling scenarios for the clinical evaluation of a novel oral suspension of spironolactone in pediatric patients with edema. A population pharmacokinetic model was developed and qualified for spironolactone and its metabolite, canrenone, using data from adults and bridged to pediatrics (2 to <17 years old) using allometric scaling. The model was then used via simulation to explore different dosing and sampling scenarios. Doses of 0.5 and 1.5 mg/kg led to target exposures (i.e., similar to 25 and 100 mg of the reference product in adults) in all the reference pediatric ages (i.e., 2, 6, 12 and 17 years). Additionally, two different sampling scenarios were delineated to accommodate patients into sparse sampling schemes informative to characterize drug pharmacokinetics while minimizing phlebotomy and burden to participating children.

Effect of food intake on the pharmacokinetics of rivoceranib in healthy subjects

Rivoceranib is a selective inhibitor of VEGFR-2 being developed for the treatment of solid tumor. The objective of the study was to evaluate the effect of food on bioavailability as well as single- and multiple-dose pharmacokinetics (PKs) of 81 and 201 mg doses of rivoceranib. The study was conducted as a two-part study. In Part 1 (single ascending dose (SAD), open-label, crossover study design), 2 oral doses of rivoceranib (81 mg or 201 mg) were given to all healthy subjects with a minimum 3-day washout period between dosing. Part 2 was a multiple ascending dose (MAD), open-label, crossover design where subjects were divided based on 81 and 201 mg doses. Both doses were administered with and without food in a crossover manner for the SAD and MAD parts. 24 healthy subjects completed Part 1 and 20 subjects completed Part 2. For the 81 mg dose in the SAD and MAD parts of the study, their food effect was not observed. For the 201 mg dose in both parts, food appeared to increase bioavailability by 20%-30% in Part 1, and 30%-40% in Part 2. Median t_max value was delayed when rivoceranib was administered with food at each dose level in both parts of the study. Dose proportionality was confirmed only for the AUC_0-∞  value from Part 1-fasted cohort but inconclusive for C_max  and AUC parameters under other dosing regimens. In conclusion, rivoceranib when taken with food delays t_max appears to increase bioavailability at 201 mg dose.

Extracellular pH affects the fluorescence lifetimes of metabolic co-factors

SIGNIFICANCE

Autofluorescence measurements of the metabolic cofactors NADH and flavin adenine dinucleotide (FAD) provide a label-free method to quantify cellular metabolism. However, the effect of extracellular pH on flavin lifetimes is currently unknown.

AIM

To quantify the relationship between extracellular pH and the fluorescence lifetimes of FAD, flavin mononucleotide (FMN), and reduced nicotinamide adenine dinucleotide (phosphate) [NAD(P)H].

APPROACH

Human breast cancer (BT474) and HeLa cells were placed in pH-adjusted media. Images of an intracellular pH indicator or endogenous fluorescence were acquired using two-photon fluorescence lifetime imaging. Fluorescence lifetimes of FAD and FMN in solutions were quantified over the same pH range.

RESULTS

The relationship between intracellular and extracellular pH was linear in both cell lines. Between extracellular pH 4 to 9, FAD mean lifetimes increased with increasing pH. NAD(P)H mean lifetimes decreased with increasing pH between extracellular pH 5 to 9. The relationship between NAD(P)H lifetime and extracellular pH differed between the two cell lines. Fluorescence lifetimes of FAD, FAD-cholesterol oxidase, and FMN solutions decreased, showed no trend, and showed no trend, respectively, with increasing pH.

CONCLUSIONS

Changes in endogenous fluorescence lifetimes with extracellular pH are mostly due to indirect changes within the cell rather than direct pH quenching of the endogenous molecules.

Pharmacokinetics and Safety of Zidovudine, Lamivudine, and Lopinavir/Ritonavir in HIV-infected Children With Severe Acute Malnutrition in Sub-Saharan Africa: IMPAACT Protocol P1092

BACKGROUND

Severe acute malnutrition (SAM) may alter the pharmacokinetics (PK), efficacy, and safety of antiretroviral therapy. The phase IV study, IMPAACT P1092, compared PK, safety, and tolerability of zidovudine (ZDV), lamivudine (3TC), and lopinavir/ritonavir (LPV/r) in children with and without SAM.

MATERIALS AND METHODS

Children living with HIV 6 to <36 months of age with or without World Health Organization (WHO)-defined SAM received ZDV, 3TC, and LPV/r syrup for 48 weeks according to WHO weight band dosing. Intensive PK sampling was performed at weeks 1, 12, and 24. Plasma drug concentrations were measured using liquid chromatography tandem mass spectrometry. Steady-state mean area under the curve (AUC0-12h) and clearance (CL/F) for each drug were compared. Grade ≥3 adverse events were compared between cohorts.

RESULTS

Fifty-two children were enrolled across 5 sites in Africa with 44% (23/52) female, median age 19 months (Q1, Q3: 13, 25). Twenty-five children had SAM with entry median weight-for-height Z-score (WHZ) -3.4 (IQR -4.0, -3.0) and 27 non-SAM had median WHZ -1.0 (IQR -1.8, -0.1). No significant differences in mean AUC0-12h or CL/F were observed (P ≥ 0.09) except for lower 3TC AUC0-12h (GMR, 0.60; 95% CI, 0.4-1.0; P = 0.047) at week 12, higher ZDV AUC0-12h (GMR, 1.52; 1.2-2.0; P = 0.003) at week 24 in the SAM cohort compared with non-SAM cohort. Treatment-related grade ≥3 events did not differ significantly between cohorts (24.0% vs. 25.9%).

CONCLUSION

PK and safety findings for ZDV, 3TC, and LPV/r support current WHO weight band dosing of syrup formulations in children with SAM.

Factors and dosage formulations affecting the solubility and bioavailability of P-glycoprotein substrate drugs

Introduction: Expression of P-glycoprotein (P-gp) increases toward the distal small intestine, implying that the duodenum is the preferential absorption site for P-gp substrate drugs. Oral bioavailability of poorly soluble P-gp substrate drugs is low and varied but increases with high-fat meals that supply lipoidal components and bile in the duodenum.Areas covered: Absorption properties of P-gp substrate drugs along with factors and oral dosage formulations affecting their solubility and bioavailability were reviewed with PubMed literature searches. An overview is provided from the viewpoint of the 'spring-and-parachute approach' that generates supersaturation of poorly soluble P-gp substrate drugs.Expert opinion: The oral bioavailability of P-gp substrate drugs is difficult to predict because of their low solubility, preferential absorption sites, and overlapping substrate specificities with CYP3A4, along with the scattered intestinal P-gp expression/function. To attain high and steady oral bioavailability of poorly soluble P-gp substrate drugs, physicochemical modification of drugs to improve solubility, or oral dosage formulations that generate long-lasting supersaturation in the duodenum, is preferred. In particular, supersaturable lipid-based drug delivery systems that can increase passive diffusion and/or lymphatic absorption are effective and applicable to many poorly soluble P-gp substrate drugs.

Exploring the Impact of Intestinal Fluid Components on the Solubility and Supersaturation of Danazol

Eleven simulated intestinal fluids (SIF) were designed using a Design of Experiment (DoE) approach. The DoE SIF covered a range of compositions of fasted state human intestinal fluid (FaHIF) with regard to pH, bile salt (BS), and phospholipid (PL). Using the model compound danazol, the apparent crystalline solubility (aCS) and apparent amorphous solubility (aAS), as well as the supersaturation propensity was determined in the DoE SIF media. The aCS of danazol was dependent on the composition of the SIF, with PL as the main factor, and a small effect from BS and an interaction between BS and PL. From the DoE solubility data a model was derived, which could predict aCS in commercially available SIF (FaSSIF-V1 and -V2) and in a range of FaHIF. The aAS of danazol was differently affected by the SIF composition than the aCS; PL was again the main factor influencing the aAS, but interactions between BS and pH, as well as pH and PL were also important. The supersaturation propensities of danazol in the DoE SIF media were affected by the same factors as the aCS. Hence, the supersaturation behaviour and aCS of danazol, were found to be closely related.

Recent Advances in Oral Nano-Antibiotics for Bacterial Infection Therapy

Bacterial infections are the main infectious diseases and cause of death worldwide. Antibiotics are used to treat various infections ranging from minor to life-threatening ones. The dominant route to administer antibiotics is through oral delivery and subsequent gastrointestinal tract (GIT) absorption. However, the delivery efficiency is limited by many factors such as low drug solubility and/or permeability, gastrointestinal instability, and low antibacterial activity. Nanotechnology has emerged as a novel and efficient tool for targeting drug delivery, and a number of promising nanotherapeutic strategies have been widely explored to overcome these obstacles. In this review, we explore published studies to provide a comprehensive understanding of the recent progress in the area of orally deliverable nano-antibiotic formulations. The first part of this article discusses the functions and underlying mechanisms by which nanomedicines increase the oral absorption of antibiotics. The second part focuses on the classification of oral nano-antibiotics and summarizes the advantages, disadvantages and applications of nanoformulations including lipid, polymer, nanosuspension, carbon nanotubes and mesoporous silica nanoparticles in oral delivery of antibiotics. Lastly, the challenges and future perspective of oral nano-antibiotics for infection disease therapy are discussed. Overall, nanomedicines designed for oral drug delivery system have demonstrated the potential for the improvement and optimization of currently available antibiotic therapies.

Drug release from magnesium aluminium silicate-polyethylene oxide (PEO) nanocomposite matrices: An investigation using the USP III apparatus

This work investigated the use of the USP III apparatus in discriminating simulated fed and fasted conditions as well as ionic strength on veegum-polyethylene (PEO) (called clay-PEO matrices hereafter) matrices. The successful formulations were characterised using differential scanning calorimetry (DSC) and evaluated for their physical properties. Isothermal calorimetry (ITC) was used to evaluate the thermodynamics of the complexation processes. The effect of agitation sequences on the matrices as evaluated from the USP III suggested an increase in polymer content to significantly decrease the burst release experienced using diltiazem hydrochloride (DILT) as a model cationic drug. The manufacturing methods showed superior performance in relation to a decrease in burst release over the physical manufactured counterparts. The clay-PEO matrices also showed robustness (no matrix failure) in up to 0.2 M ionic strength solutions mimicking the upper limit experienced in the GI tract. ITC results revealed that the binding between DILT and PEO was enthalpy and entropy-driven. Furthermore, the binding between veegum and DILT in the presence of PEO was shown to be enthalpy-driven and entropically unfavourable, which was also the case for the binding between veegum and PEO thus giving insights to how the matrices were performing on a molecular level.

Bioequivalence Study of Amitriptyline Hydrochloride Tablets in Healthy Chinese Volunteers Under Fasting and Fed Conditions

Purpose

This study compares the pharmacokinetic and safety profiles between a new generic and a branded reference formulation of amitriptyline hydrochloride tablets, and assesses the bioequivalence of the two products in healthy Chinese volunteers to obtain sufficient evidence for the marketing approval of the generic drug.

Materials and Methods

A randomized, open-label, two-period crossover study (clinicaltrials.gov, NCT03646526) was conducted under both fasting and fed conditions in healthy Chinese volunteers (24 subjects/condition). Eligible subjects randomly received a single 25 mg dose of either the test or the reference formulation, followed by a 3-week washout period. Blood samples were collected until 144 h following administration. The pharmacokinetic parameters were acquired based on the concentration-time profiles, including the areas under the plasma concentration-time curve (AUC_0-t, AUC_0-∞), the peak plasma concentration (C_max), the time to achieve C_max (T_max), and the elimination half-life (t_1/2). The geometric mean ratios (GMRs) and the corresponding 90% confidence intervals (CIs) of amitriptyline were acquired for bioequivalence analysis, and values of these parameters for nortriptyline were used for comparison of therapeutic outcomes. Safety assessments included laboratory tests, physical examination, vital signs, and incidence of adverse events (AEs).

Results

The values of t_1/2 and T_max for amitriptyline were not significantly different between the test and reference products under both fasting and fed conditions (P > 0.05). The GMRs of C_max, AUC_0–t, and AUC_0-∞ between the two products, and corresponding 90% CIs, were all within the range of 80% to 125% under both fasting and fed conditions. The test and reference products were well tolerated and did not elicit serious adverse events.

Conclusion

This study demonstrated that the generic and reference products were well tolerated by the subjects and bioequivalent, according to the rate and extent of the drug absorption.

Microrheological characterization of covalent adaptable hydrogel degradation in response to temporal pH changes that mimic the gastrointestinal tract

Covalent adaptable hydrogels (CAHs) reversibly adapt their structure in response to external stimuli, emerging as a new platform for biological applications. Due to the unique and complex nature of these materials, a characterization technique is needed to measure the rheology of these CAHs in biological processes. μ2rheology, microrheology in a microfluidic device, is a technique that can fully characterize real-time CAH degradation in a changing environment, such as the pH environment of the GI tract. This characterization will enable design and tailoring of these materials for controlled and targeted oral drug delivery. Using μ2rheology, we can exchange the fluid environment without sample loss and measure the change in CAH rheological properties. We show degradation kinetics and material property evolution are independent of degradation history. However, the initial cross-link density at each pH exchange can be decreased by degradation history which decreases the time for the CAH to degrade to the gel-sol transition. These results indicate that CAH degradation can be tuned by changing the initial material properties by varying polymer concentration and ratio of functional groups. We also show that μ2rheology will enable the design of new dynamic materials for targeted drug delivery by enabling these materials to be characterized and tailored in vitro.

The effect of drug ionization on lipid-based formulations for the oral delivery of anti-psychotics

Lipid-based formulations (LBFs) are well-known to improve the oral bioavailability of poorly water-soluble drugs (PWSDs) by presenting the drug to the gastrointestinal environment in a molecularly dispersed state, thus avoiding the rate-limiting dissolution step. Risperidone and lurasidone are antipsychotics drugs which experience erratic and variable absorption, leading to a low oral bioavailability. The aim of this research was to develop and investigate the performance of risperidone and lurasidone when formulated as an emulsion and silica-lipid hybrid (SLH). Lurasidone and risperidone were dissolved in Capmul® MCM at 100% and 80% their equilibrium solubility, respectively, prior to forming a sub-micron emulsion. SLH microparticles were fabricated by spray-drying a silica stabilised sub-micron emulsion to form a solid powder. The performances of the formulations were evaluated in simulated intestinal media under digesting conditions, where the emulsion and SLH provided a 17-fold and 23-fold increase in LUR solubilisation, respectively. However, the performance of RIS was reduced by 2.2-fold when encapsulated within SLH compared to pure drug. Owing to its pKa, RIS adsorbed to the silica and thus, dissolution was significantly hindered. The results reveal that LBFs may not overcome the challenges of all PWSDs and physiochemical properties must be carefully considered when predicting drug performance.

Transfer of orally administered hyaluronan to the lymph

Hyaluronan (HA) has been widely used in medicines, cosmetics and supplements for health and beauty maintenance. Oral administration is the most desirable and convenient means for consumers. The intestine plays an important role in immune system. We hypothesized that orally administered HA would be transferred to both blood and lymph. In this study, we investigated how orally administered HA was absorbed from the gastrointestinal tract and how much HA was incorporated. Four HA formulations, HA-2,000, 8,000, 50,000 and 300,000, were administered to rats, and concentrations of HA in blood and lymph were determined. In the HA-2,000 group, the HA plasma concentration increased after oral administration. The highest lymph concentration of HA was also obtained by administration of HA-2,000. The plasma and lymph concentrations slightly increased after oral administration in the HA-8,000 group. On the other hand, little absorption was found in the HA-50,000 and 300,000 groups. It is speculated that smaller molecules of HA are more easily absorbed. HA-2,000 was absorbed mainly through the portal vein and through the lymph in gastrointestinal absorption. This is the first report showing that HAs, large molecular weight and water-soluble molecules, after oral administration are transferred not only into blood but also into lymph.

Enhancing the oral bioavailability of simvastatin with silica-lipid hybrid particles: The effect of supersaturation and silica geometry

Silica-lipid hybrid (SLH) microparticles are a solidified lipid-based drug delivery system under investigation for their aptitude to enhance the oral bioavailability of poorly water-soluble drugs. The cholesterol-lowering agent, simvastatin (SIM), is poorly water-soluble and undergoes extensive first pass metabolism, resulting in a low oral bioavailability of approximately 5%. Hence, the current pre-clinical studies investigated the application of SLH technology to SIM with a supersaturation approach, aiming to enhance bioavailability and drug loading capacity. Additionally, the effect of silica was explored by evaluating the performance of SLH fabricated with silica of different particle geometries. SLH microparticles with supersaturated SIM loading levels ranging from 100% to 400% above the equilibrium solubility were successfully fabricated using either Aerosil® 300 or Syloid® 244 silica. All SLH formulations existed as white free-flowing powders, consisting of spherical porous microparticles for Aerosil® 300, and aggregated irregular microparticles for Syloid® 244. During in vitro dissolution in pH 7.0 media, the SLH formulations performed up to 4.4-fold greater than pure SIM powder. Furthermore, in vivo oral pharmacokinetics in male Sprague-Dawley rats revealed that the SLH formulations enhanced the oral bioavailability of SIM up to 6.1-fold and 2.9-fold, in comparison to pure SIM powder and a commercially available formulation (Simvastatin Sandoz®), respectively. The greatest in vivo performance enhancement was observed for the SLH formulation manufactured with Syloid® 244 silica with a supersaturation level of 200%. SLH technology demonstrated to be a successful formulation strategy to significantly improve the oral bioavailability of SIM in rodents and therefore, has a strong potential to also improve the oral bioavailability of SIM in humans.