Research advances on structural characterization of resistant starch and its structure-physiological function relationship: A review

Combination of extrusion and bamboo leaf flavonoids modulates in vitro maize starch digestion: Insight into the molecular mechanisms and multi-scale structure

This study investigates the combined effects of extrusion processing and bamboo leaf flavonoids (BLFs) on the digestive properties and multiscale structure of maize starch (MS). Extrusion increased the levels of rapidly digestible starch (RDS) and slowly digestible starch while the content of resistant starch (RS) decreased to 20.19 %. Notably, higher BLF concentrations reversed this trend, increasing RS content to 35.30 %. The four main BLF monomers inhibited α-amylase activity by forming hydrogen bonds and hydrophobic interactions with its active residues. Extrusion disrupted the layered structure of MS, reducing its compactness, while the addition of 2.5 % BLFs led to pore formation on starch surface. The relative crystallinity of the starch decreased by approximately 34.34 % after extrusion. The addition of BLFs increased the single helix structures and improved the relative crystallinity of the nanocrystals with orthorhombic crystal structure. These results provide critical insights into how extrusion combined with BLFs can regulate starch digestibility.

Saturated fatty acids as guest compounds in the annealing of high-amylose starch: Insights into fatty acid chain length and structural conformation

This study explores the effect of fatty acid chain length in regulating the structural changes and physicochemical properties of high-amylose maize starch (HAMS) induced by annealing with fatty acid solution (AFAS). AFAS was found to effectively regulate the conformation of amylose molecular chains within starch granules. Annealing with fatty acids of shorter chain length, such as lauric acid, promoted the formation of both double and single helices within HAMS granules. The single-helix fraction increased (up to 4.5 %) after AFAS treatment. HAMS modified with lauric acid exhibited the highest crystallinity (24.1 %). The level of structural changes varied for HAMS with shorter amylose chain length. Fatty acids with shorter chain lengths, such as lauric acid and myristic acid, induced higher levels of resistant starch (up to 65 %) under in vitro simulated digestion conditions. Pearson analysis revealed a significant negative correlation (p < 0.05) between the resistant starch content of the modified starch and the fatty-acid chain length complexed during AFAS. These findings suggest that the chain length of fatty acids affects the enzyme resistance of the modified starches, with shorter fatty-acid chain lengths being more effective in inducing ordered structures.

Interactions between food matrices and odorants: A review

Currently, although odorants of various foods have been thoroughly studied, the regulation of food aromas is still difficult due to the interaction between odorants and food matrices. These complex matrices in food may interact with odorants to change the volatility of odorants, which in turn affect food aroma. Clarifying the interaction between them are promising for predicting food aroma formation, which will provide valuable support for a high-efficiency food industry. Herein, the research progresses on interactions between food matrices and odorants are reviewed. First, the analysis methods and their advantages and disadvantages are introduced and discussed emphatically, including sensory-analysis methods, characterization methods of the volatility changes of odorants, and the research methods of interaction mechanism. Further, the research advances of interactions among proteins, carbohydrates, lipids, and polyphenols with odorants are summarized briefly. Finally, the existing problems are discussed and the research prospects are proposed.

Hemoadhican Fiber Composite with Carbon Dots for Treating Severe Hemorrhage and Infected Wounds

Uncontrolled bleeding and infection following trauma continue to pose significant clinical challenges. This study employs hemoadhican (HD) polysaccharide, known for its superior hemostatic properties, as the foundational material to synthesize antibacterial carbon dots (H-CDs) through a hydrothermal method at various temperatures. The H-CDs exhibiting optimal antimicrobial properties were identified via in vitro antimicrobial characterization. The selected H-CDs possess nanoscale dimensions and a positive surface charge. They contain aldehyde groups and generate reactive oxygen species, which effectively eliminate bacteria. Subsequently, H-CDs were integrated into HD fibers (CDs-HD fibers) using a wet-spinning technique. The water vapor transmission rate, blood contact angle, and in vitro antimicrobial efficacy were evaluated. In a rat model of severe femoral artery hemorrhage and a noncompressible hepatic hemorrhage model, CDs-HD fibers demonstrated superior hemostatic performance compared to the commercially available QuikClot Combat Gauze. Furthermore, in a rat model of mixed bacterial wound infection, CDs-HD fibers significantly enhanced epithelial tissue remodeling and collagen deposition. In vivo studies confirmed the excellent biocompatibility of CDs-HD fibers. These findings suggest that CDs-HD fibers hold promise as a potential dressing for managing severe bleeding and preventing wound infections.

Increased Crystallite Stability Enhances Gut Microbial Fermentability of Type 5 Resistant Starch

The amylolytic susceptibility of starch-lipid complexes with different forms of crystallites has been studied extensively, but the fermentation properties of these complexes remain little understood. Hence, the in vitro fecal fermentation properties of starch-lipid complexes with VI-type and VII-type crystallites were investigated in the present study. Compared to VI-type complexes, fermentation of VII-type complexes caused more severe disruption to the crystallites and resulted in greater acid, reducing sugar, and short-chain fatty acids (SCFAs) production. Moreover, fermentation of VII-type complexes promoted a greater relative abundance of SCFAs-producing bacteria in the fecal microbiota than did VI-type complexes. Our results show that the more stable VII-type complexes are utilized more effectively than VI-type complexes, which can be attributed to the bacteria binding more readily to VII-type than to VI-type complexes. Therefore, VII-type complexes were considered to deliver better health benefits than VI-type complexes due to their greater potential for producing SCFAs and stimulating beneficial gut microbial activity in the colon.

Sorghum starch review: Structural properties, interactions with proteins and polyphenols, and modification of physicochemical properties

Sorghum, a gluten-free carbohydrate source with high antioxidants and resistant starch, contains anti-nutrients like phytic acid, tannin, and kafirin. Interactions with starch and proteins result in polyphenol-starch, starch-kafirin, and tannin-protein complexes. These interactions yield responses such as V-type amylose inclusion complexes, increased hydrophobic residues, and enzyme resistance, reducing nutrient availability and elevating resistant starch levels. Factors influencing these interactions include starch composition, structure, and Chain Length Distribution (CLD). Starch structure is impacted by enzymes like ADP-glucose pyrophosphorylase, starch synthases, and debranching enzymes, leading to varied chain lengths and distributions. CLD differences significantly affect crystallinity and physicochemical properties of sorghum starch. Despite its potential, the minimal utilization of sorghum starch in food is attributed to anti-nutrient interactions. Various modification approaches, either direct or indirect, offer diverse physicochemical changes with distinct advantages and disadvantages, presenting opportunities to enhance sorghum starch applications in the food industry.

Physicochemical characterization and in vitro digestibility of resistant starch from corn starch sugar residue

This study sought to investigate the thermal stability and digestibility of corn starch sugar residue resistant starch (CSSR-RS) through comparative analysis of the physicochemical properties and structural characteristics among CSSR-RS, high-amylose corn starch (HS), and normal corn starch (NS). CSSR-RS contained 51.76 % resistant starch (RS), with 42.6 % remaining after high-temperature treatment, which was significantly higher than HS, demonstrating strong resistance to gelatinization. CSSR-RS is characterized by highly ordered aggregation of small molecules with a C-type crystalline structure, and irregular granular structures with wrinkled surfaces. Compared with NS and HS, the short-range and long-range order of CSSR-RS were significantly higher, indicating excellent thermal stability. In vitro simulated digestion revealed that the total hydrolysis rate of CSSR-RS was significantly lower than those of NS and HS, and the residual digesta of CSSR-RS also showed better resistance to digestion than HS. CSSR-RS exhibited significant development prospects in healthy food.

Autoclaved Starch: Structure and Functionality Relationship in a Matrix With the Same Contribution of Amylose and Amylopectin

The rational use of autoclaved starches in food applications is difficult because there is a lack of information on their structure-functionality relationship. The novelty of this research relies on disclosing such an association. Hylon V starch was autoclaved at 105, 120, and 135°C to investigate its crystalline and double-helical features and its relationship with functionality. In autoclaved Hylon V starch, interactions of amylopectin and amylose improved while the crystalline regions decreased. The degree of double helices (DD) decreased after autoclaving at 105°C and the degree of order (DO) increased after treatment at 120 and 135°C. The water solubility index (WSI) (4.63-6.38%) and swelling power (SP) (4.39-7.1 g/g) increased when the temperature increased. On the other hand, water (103.49-225.01%) and oil (61.91-94.53%) holding capacity (WHC and OHC, respectively) increased after autoclaving treatment, although the values decreased with the treatment intensity. The functional properties were affected when the structure changed as a function of the treatment temperatures. PCA analysis showed that WSI and SP of autoclaved Hylon V starch were associated with a high DD, with better compaction, and with stronger amylopectin-amylose interactions. WHC and OHC were associated with better crystallinity, stronger interactions of amylopectin and amylose, and heterogeneous double-helical crystallites. These findings are useful for understanding the structure-functionality relationship of autoclaved Hylon V starch and pave the way for future research regarding the effects of its incorporation on the properties of food matrices such as bread, yogurt, cakes, and pudding.

Advances in understanding dietary fiber: Classification, structural characterization, modification, and gut microbiome interactions

Gut microbiota and their metabolites profoundly impact host physiology. Targeted modulation of gut microbiota has been a long-term interest in the scientific community. Numerous studies have investigated the feasibility of utilizing dietary fibers (DFs) to modulate gut microbiota and promote the production of health-beneficial bacterial metabolites. However, the complexity of fiber structures, microbiota composition, and their dynamic interactions have hindered the precise prediction of the impact of DF on the gut microbiome. We address this issue with a new perspective, focusing on the inherent chemical and structural complexity of DFs and their interaction with gut microbiota. The chemical and structural complexity of fibers was thoroughly elaborated, encompassing the fibers' molecular composition, polymorphism, mesoscopic structures, porosity, and particle size. Advanced characterization techniques to investigate fiber structural properties were discussed. Additionally, we examined the interactions between DFs and gut microbiota. Finally, we summarized processing techniques to modify fiber structures for improving the fermentability of DF by gut microbiota. The structure of fibers, such as their crystallinity, porosity, degree of branching, and pore wettability, significantly impacts their interactions with gut microbiota. These structural differences also substantially affect fiber's fermentability and capability to modulate the composition of gut microbiota. Conventional approaches are not capable of investigating complex fiber properties and their influences on the gut microbiome; therefore, it is of the essence to involve advanced material characterization techniques and artificial intelligence to unveil more comprehensive information on this topic.

Debranched Lentil Starch-Sodium Alginate-Based Encapsulated Particles of Lacticaseibacillus rhamnosus GG: Morphology, Structural Characterization, In Vitro Release Behavior, and Storage Stability

Starches with different degrees of debranching (DBS30, DBS60, and DBS90) and sodium alginate were used as the wall material for encapsulating particles of Lacticaseibacillus rhamnosus GG (LGG). The structural characteristics of these encapsulated particles were examined, along with the impact of varying levels of debranching on the encapsulation efficiency, the in vitro release of LGG under the simulated gastrointestinal environment, and the storage stability of the encapsulated particles. The results revealed a transformation in the crystalline polymorph from C- to B+V-type following debranching and retrogradation. This process also resulted in a significant decrease in molecular weight and polydispersity index, accompanied by an increase in amylose and resistant starch levels along with the relative crystallinity of the debranched lentil starch. Comparatively, DBS60-LGG and DBS90-LGG exhibited higher encapsulation efficiency and encapsulation yield than UDBS-LGG and DBS30-LGG. Furthermore, these encapsulated particles provided enhanced protection for LGG in both the simulated gastrointestinal environment and the storage process. It can be inferred that a superior encapsulation performance of the debranched lentil starch-sodium alginate-based encapsulated LGG particles was associated with higher debranching levels, a more uniform molecular weight distribution, and a more ordered multi-scale structure of the debranched lentil starch.

Evolution of multi-scale structure and microbiota metabolism of lentil resistant starch during the dynamic fermentation in vitro

This study investigated the structural changes of resistant starch (RS) derived from autoclaved lentil starch (ALRS) and untreated lentil starch (ULRS) during in vitro colonic fermentation, as well as their regulatory effects on the composition of the intestinal microbiota. Following in vitro fermentation, both RS samples exhibited a progressive decrease in molecular weight and a gradual increase in double helix/order. Bifidobacterium was more abundant in ULRS during the initial period of fermentation, while ALRS showed higher abundance in the later stage. ALRS demonstrated greater production of short-chain fatty acids (SCFAs) compared to ULRS, likely attributed to its higher structural order and faster fermentation pattern. The distinct surface morphologies of ULRS and ALRS played a crucial role in determining the accessibility of RS substrates for microbial fermentation. These different structural patterns also influenced the shifts in microbial composition in fecal cultures, leading to variations in SCFAs production through anaerobic fermentation.

Mechanism of multiscale structural reassembly controlled by molecular chains during amylase digestion of wheat starch

The digestive characteristics of wheat starch (WS) are closely related to its structure. However, the mechanisms underlying the multiscale structural evolution and reassembly controlled by molecular chains during digestion are poorly understood. To address this issue, amylopectin of wheat starch (APWS) and amylose of wheat starch (AMWS) were separated and digested in vitro. After digestion, chains in WS with a degree of polymerization (DP) < 12 or DP > 37 were degraded, the double-helix content decreased from 58.65 % to 48.77 %, and many particles were degraded. For APWS, the DP > 36 chains increased, the B-type crystallinity increased to 9.55 %, and the particles were transformed into new aggregated structures. For AMWS, the number of 18 < DP < 270 chains was increased, the double-helix content increased from 19.78 % to 37.92 %, the B-type crystallinity increased from 6.65 % to 19.40 %, and a dense granular structure was formed. Overall, our study confirmed that WS, APWS, and AMWS had distinct multiscale structural reassembly mechanisms during in vitro digestion. The DP > 36 chains in APWS and 18 < DP < 270 chains in AMWS were the primary contributors to the formation of enzyme-resistant multiscale structures. This study can serve as a theoretical basis for designing the WS multiscale structure using molecular chains to improve its nutritional value.

Optimization of synthesis of cationic starches for wastewater sludge and microalgae separation

The implementation of stricter water protection legislation requires the development of novel environmentally friendly water treatment materials. A new method for the preparation of water soluble cationic starch flocculants using potato starch, 3-chloro-2-hydroxypropyltrimethylammonium chloride and CaO additive was developed and surface response methodology was successfully utilized for the optimization of degree of substitution in the cationization of potato starch with and without CaO additive. Based on the results of destabilization studies of model kaolin, wastewater sludge, and microalgae dispersion systems, optimized conditions ware proposed for obtaining an efficient, soluble, and biodegradable cationic starch flocculant with optimal structure. The duration of starch etherification reaction was reduced to <12 h to obtain soluble cationic starch derivatives with a degree of substitution of quaternary ammonium groups of 0.25, which retained the granular structure during synthesis. An efficient flocculation technology using anionic polymer and high content of biodegradable cationic flocculant was proposed. The highly efficient flocculation of microalgae suspensions using developed cationic starch derivative with the degree of substitution of cationic groups of 0.25 has been also achieved. The developed environmentally friendly cationic starches with tailored flocculation properties proofed to have a great potential in various water cleaning and separation technologies with prospects in wastewater treatment, agriculture or energy sectors.

Influence of the induced Na+/Cl- ionic polarization effects on multi-scale structures of maize starch during radio frequency heating

Structural modification/unfolding of starch molecules can be improved by radio frequency (RF) treatment. This necessitates a better understanding of its action mechanism through rapid heating and dipolar/ionic molecular vibration effects. Native maize starch (NS) was subjected to RF heating in a NaCl solution to five target temperatures, and its effect on structural modifications was evaluated. Results showed that the conductivity, particle size distribution and zeta potential of RF heated starch increased with increasing temperature. RF energy had a significant effect on the vibration intensity of other skeleton modes. No new chemical bonds/groups were formed in the starch even though there was the effect of sodium/chloride ions with the added vibration intensity of the ions and the dipolar rotation movements resulted in changes in the disordered and/or ordered structures. The RF treatment at 70 °C had the highest energy (10.4 kJ) of inter-strand hydrogen bond, crystallinity (36.6 %) and trough viscosity (2480 cp), but had the lowest crystallite dimension (13.7 nm), full width at half maximum (14.4) of peak at 480 cm-1, and breakdown (534 cp) and setback (784 cp) viscosities based on X-ray diffraction, Fourier transform infrared, and Raman and rapid viscos analyzer observations.

Interactions Between Corn Starch and Ethyl Maltol Under Heat-Moisture Treatment and Its Application in Fried Chicken Nuggets

This study delved into the interaction between corn starch and ethyl maltol during innovative repeated continuous heat-moisture treatment (RCHMT) and its impact on the quality of fried chicken nuggets. The results reveal that the complexation ratio of ethyl maltol is about 31.6%, and the complex creates dense microporous structures. Native starch and complex samples exhibited an A-type crystal structure, while the physical mixture sample showed superposition peaks of starch and ethyl maltol. Additionally, the peak of C-O-H def., CH2 of the complex sample was blue-shifted to the larger wave number, and the hydrogen bond structure was enhanced. Moreover, the complex exhibited a higher resistant starch content and lower hydrolysis rate and amylose content than the physical mixture sample. The starch-ethyl maltol complex has been demonstrated to be a non-inclusion compound. It has been shown to reduce oil absorption and enhance the crispness of fried chicken nuggets, matching that of commercial products. This finding provides a direction for the development of innovative coating powders.

A hemoadhican-based sponge with anti-heparin interference for treating uncontrollable massive hemorrhage

Hemoadhican (HD) is an exopolysaccharide with a branched structure that has been reported for its high hemostatic ability. In this study, a HD-based hemostatic sponge was prepared through ultrasonic dissolution and freeze-drying without using any cross-linking agent. The sponge could spontaneously cross-link using hydrogen bonds to form adhesive mud within 3 s upon contact with blood. This sponge-mud mixture adhered tightly to the wound tissue, forming a pressure-resistant physical barrier that captures and locks in blood cells and platelets. Simultaneously, the hydrophobic methyl groups of HD sponges repel blood inwardly, effectively sealing the wound. The brush-like structure of HD molecules was suspected to penetrate wet tissues through topological entanglement, thereby enhancing wet adhesion. Compared with gauze and gelatin sponges, HD sponges achieved more effective hemostasis in animal models using rat and rabbit femoral arteries. In particular, HD sponges showed excellent hemostasis in heparin-induced hemorrhage models in mice and pigs. The in vivo experiment demonstrated the excellent biosafety of the HD sponge. Conclusively, the HD sponge is a safe and efficient rapid hemostatic material that is expected to become an alternative material for clinical hemostatic procedures.

Potato resistant starch improves type 2 diabetes by regulating inflammation, glucose and lipid metabolism and intestinal microbial environment

This study established a type 2 diabetes mellitus (T2DM) mouse model and assessed the influence of Potato resistant starch 3 (PRS3) intervention. The results showed that PRS3 significantly improved glucose tolerance and insulin resistance, alleviated abnormal lipid metabolism and oxidative stress, inhibited inflammatory factor expression in the liver and pancreas, and reduced pathological damage to the pancreas and liver. Moreover, PRS3 increased fecal short-chain fatty acid content and altered the gut microbiota. At the phylum level, PRS3 increased the relative abundance of Firmicutes and Verrucomicrobiota and decreased the relative abundance of Desulfobacterota, Proteobacteria, Bacteroides, and Actinobacteriota. At the species level, PRS3 increased the relative abundance of Faecalibaculum_rodentium, uncultured_bacterium_g_Dubosiella, uncultured_bacterium_g__Olsenella, and Akkermansiamuciniphila and reduced the relative abundance of unclassified_g_Lactobacillus, unclassified_g_Cornebacterium, Lactobacillus_murinus, and Lachnospiraceae_bacterium_10_1. This study provides a theoretical basis for elucidating the glucose-lowering mechanisms of PRS3.

Multi-scale structural insights on starch digestibility of instant rice

Multi-scale structures were investigated to understand starch digestibility of instant rice. A wide range of maximum starch digested ratio, up to about 20%, was observed among instant rice prepared from different rice varieties. Instant rice with a smooth and densely packed cross-section showed slower starch digestibility than those with a porous and loosely packed structure. All samples displayed B + V type crystallinity, with V-type crystallinity negatively correlating with maximum starch digested percentage. After digestion, starch chain-length distributions were significantly altered: rapidly digested starch comprised long amylose and short amylopectin chains, while slowly digested starch comprised chains with a peak degree of polymerization (DP) around 130. These results indicate that instant rice with a compact microstructure, high V-type crystallinity, and DP 130 fractions during digestion can reduce starch digestibility. This study provides insights for food industry to develop instant rice products with slow starch digestibility, potentially improving human health.

Impact of butyric acid modification on the structural and functional properties of rice starch

Rice is a food with a high starch content, comprising over 75% of its composition. However, prolonged and excessive consumption of this cereal may lead to elevated blood glucose levels, which can increase the risk of obesity, type 2 diabetes, and cardiovascular disease. Butyric acid (BA), the primary energy source for colonic epithelial cells, exhibits the highest utilization rate among short-chain fatty acids, underscoring its importance for human health. In this study, rice starch butyrate (RSB) samples were synthesized using the aqueous phase process, with broken rice starch (RS) and butyric anhydride serving as the substrate. RSB samples with different degrees of substitution (DS) were produced by modulating the addition amount of butyric anhydride. The crystal structures, morphology of starch granules, pasting properties, thermal stability, and in vitro digestibilities of the RSB were investigated and compared with those of native rice starch. Fourier transform infrared (FTIR) spectroscopy confirmed the successful incorporation of butyryl into the starch molecules. With the increase in DS, the roughness of the RSB material's surface gradually increased, leading to the deterioration of the smooth structure on certain surfaces, which resulted in the appearance of cracks and collapses. Additionally, the crystallinity diminished from 24.77% to 7.41% with increasing DS. Concurrently, in vitro digestive characterisation revealed that the percentage of resistant starch increased from 24.33% to 47.72%. Thus, this study can provide a theoretical basis for the development of novel products of amyl butyrate.

A carboxymethyl-resistant starch/polyacrylic acid semi-IPN hydrogel with excellent adhesive and antibacterial properties for peri-implantitis prevention

Hydrogels possess inherent characteristics that render them promising for the prevention of peri-implantitis. Nonetheless, hydrogels with singular network structures are incapable of concurrently achieving the desired adhesion and mechanical properties. In this work, a carboxymethyl resistant starch/polyacrylic acid semi-interpenetrating (CMRS/PAA semi-IPN) hydrogel was successfully prepared in one step. Its morphology, structure, mechanical properties, and adhesion properties were systematically assessed, which revealed a homogeneously porous structure with a commendable mechanical strength of 67.317 kPa and an adhesion strength of 63 kPa. Ciprofloxacin (Cip) was loaded in the CMRS/PAA hydrogel via in situ compounding. The in vitro kinetic study of drug release shows that the slow drug release efficiency exceeds 90 % in the weakly acidic microenvironment at the infection site after 72 h, indicating enhanced antimicrobial properties. The Cip-loaded hydrogel also exhibits a remarkable bacterial inhibition rate exceeding 99 % against the pathogenic bacterium P. gingivalis and good cytocompatibility and hemocompatibility in vitro. In summary, the current work explored a novel solution and direction for the development of anti-infective medical materials applicable to dental implants.

Effect of the Autoclaving-Cooling Cycle on the Chemical, Morphological, Color, and Pasting Properties of Foxtail Millet Starch

This study investigated the effect of the autoclaving-cooling (AC) cycle and the starch-to-water ratio on the chemical, morphological, color, and pasting properties of foxtail millet starch to improve its utilization in the food industry. Starch suspensions were prepared using different starch-to-water ratios (i.e., 1:1 and 1:4), with one to three AC cycles for each ratio. Subsequently, the chemical, morphological, color, and pasting properties of native and autoclaved-cooled foxtail millet starch (ACFS) were determined. The results showed that ACFS had higher overall resistant starch (RS) content than native starch. AC treatment reduced the lightness and whiteness index, gelatinization time, and pasting temperature while increasing particle sizes with irregular shapes and surfaces. Starch treated with distilled water at a 1:1 ratio with two AC cycles (1:1-2C) exhibited the highest amylose, starch, and RS contents with stable pasting properties compared with that in other AC treatments. Pasting stability was indicated by the low breakdown viscosity and high trough and final viscosity. The findings suggest that ACFS treated with 1:1-2C could be a stabilizer and functional food.

The multifactorial phenomenon of enzymatic hydrolysis resistance in unripe banana flour and its starch: A concise review

Unripe banana flour starch possesses a high degree of resistance to enzymatic hydrolysis, a unique and desirable property that could be exploited in the development of functional food products to regulate blood sugar levels and promote digestive health. However, due to a multifactorial phenomenon in the banana flour matrix-from the molecular to the micro level-there is no consensus regarding the complex mechanisms behind the slow enzymatic hydrolysis of unripe banana flour starch. This work therefore explores factors that influence the enzymatic hydrolysis resistance of raw and modified banana flour and its starch including the proportion and distribution of the amorphous and crystalline phases of the starch granules; granule morphology; amylose-amylopectin ratio; as well as the presence of nonstarch components such as proteins, lipids, and phenolic compounds. Our findings revealed that the relative contributions of these factors to banana starch hydrolytic resistance are apparently dependent on the native or processed state of the starch as well as the cultivar type. The interrelatability of these factors in ensuring amylolytic resistance of unripe banana flour starch was further highlighted as another reason for the multifactorial phenomenon. Knowledge of these factors and their contributions to enzymatic hydrolysis resistance individually and interconnectedly will provide insights into enhanced ways of extraction, processing, and utilization of unripe banana flour and its starch.

Recent Advances in Physical Processing Techniques to Enhance the Resistant Starch Content in Foods: A Review

The physical modification of starch to produce resistant starch (RS) is a viable strategy for the glycemic index (GI) lowering of foods and functionality improvement in starchy food products. RS cannot be digested in the small intestine but can be fermented in the colon to produce short-chain fatty acids rather than being broken down by human digestive enzymes into glucose. This provides major health advantages, like better blood sugar regulation, weight control, and a lower chance of chronic illnesses. This article provides a concise review of the recent developments in physical starch modification techniques, including annealing, extrusion, high-pressure processing, radiation, and heat-moisture treatment. Specifically, the focus of this paper is on the alteration of the crystalline structure of starch caused by the heat-moisture treatment and annealing and its impact on the resistance of starch to enzymatic hydrolysis, as well as the granular structure and molecular arrangement of starch caused by extrusion and high-pressure processing, and the depolymerization and crosslinking that results from radiation. The impacts of these alterations on starch's textural qualities, stability, and shelf life are also examined. This review demonstrates how physically modified resistant starch can be used as a flexible food ingredient with both functional and health benefits. These methods are economically and ecologically sustainable since they successfully raise the RS content and improve its functional characteristics without the need for chemical reagents. The thorough analysis of these methods and how they affect the structural characteristics and health advantages of RS emphasizes the material's potential as an essential component in the creation of functional foods that satisfy contemporary dietary and health requirements.

Effect of fibers on starch structural changes during hydrothermal treatment: multiscale analyses, and evaluation of dilution effects on starch digestibility

BACKGROUND

Dietary fibers (DFs) may influence the structural, nutritional and techno-functional properties of starch within food systems. Moreover, DFs have favorable effects on the digestive system and potentially a lower glycemic index. These potential benefits may change depending on DF type. Starch processed in the presence of soluble and insoluble fibers can undergo different structural and functional changes, and the present study investigated the effects of short-chain and long-chain inulin and cellulose on the structural and digestive properties of wheat starch.

RESULTS

The combined use of differential scanning calorimetry, Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) provided insights into the structural changes in starch and inulin at different levels. Short-chain and long-chain inulin had higher water retention capacity and a potential to limit starch gelatinization. The FTIR results revealed an interaction between starch and inulin. Scanning electron microscopy analysis showed morphological changes in starch and inulin after the hydrothermal treatment. Cellulose fiber was not affected by the hydrothermal treatment and had no influence on starch behavior. The structural differences observed through XRD, FTIR and scanning electron microscopy analyses between starch with and without inulin fibers did not significantly impact starch digestibility, except for the dilution effect caused by adding DFs.

CONCLUSION

The present study highlights the importance of utilizing different analytical tools to assess changes in food samples at different scales. Although short-chain and long-chain inulin could potentially limit starch gelatinization, the duration of the heat treatment (90 °C for 10 min) was sufficient to ensure complete starch gelatinization. The dilution effect caused by adding fibers was the primary reason for the effect on starch digestibility. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Correlation Study between Multi-Scale Structure and In Vitro Digestibility of Starch Modified by Temperature Difference

Physical techniques are widely applied in the food industry due to their positive impact on food quality and the environment. Temperature differences can effectively modify starch, but the resulting changes in starch structure and quality remain unclear. In this study, the corn starch was processed with high temperature, low temperature, and temperature difference (TD), including high temperature before low temperature (H-L) and low temperature before high temperature (L-H). The results showed that high temperature induced the umbilicus to concave inward shape and sharply decreased the amylose content, while low temperature increased the surface micropores and reduced the A-chain. TD reduced the fluorescence intensity and increased the clearness of the growth ring. TD elevated the relative crystallinity (RC), short-range order, A/B1 chains, hydrolysis parameters, and resistant starch (RS), and reduced amylose content, B2/B3 chains, and viscosity. Moreover, the corn starches treated by H-L had lower amylose content and higher RC, 1047/1022, A-chain, and RS than those treated by L-H. Overall, high temperature degraded the amylose and low temperature destroyed the amylopectin. During the TD, H-L can accelerate the starch molecular rearrangement more than the opposite temperature treatment order. These results will help produce novel starches for better food applications.

Quantification of resistant starch content in rice after hydrothermal treatments using terahertz spectroscopy

Since hydrothermal treatments can enhance resistant starch (RS) content in rice and provide health benefits when consumed, a less laborious and non-destructive method to determine RS content is needed. Terahertz (THz) spectroscopy is hypothesized as a suitable method to quantify RS content in rice after hydrothermal treatment with its sensitivity for the intermolecular forces increase in the formation of RS. In this study, we first used the traditional in vitro hydrolysis method to determine the content of RS in rice. Then, the potential of starch absorbance peaks to quantify RS content after three commonly used hydrothermal methods, soaking, mild heat-moisture treatment, and parboiling, was investigated. The second derivative intensities of the peak at 9.0, 10.5, 12.1, and 13.1 THz were confirmed as being correlated with RS content and showed the high accuracy to predict RS content in samples (R2 > 0.96). Our results indicate the RS content of hydrothermally treated rice can be accurately quantified using these peaks.

Understanding starch gelatinization and rheology modeling of tapioca starch- NaCl/CaCl2 blends: Thermodynamic properties and gelatinization reaction kinetics during pre- and post-ultrasonication

The presence of salt can impact the fluid phase and gelatinization process of starch granules. The variation in viscosity and rheology models including the Herschel-Bulkley, the Casson model, and the power law, were determined by adding salts before and after starch ultrasonication. Non-isothermal kinetics can be utilized for the mathematical modeling of the gelatinization process and the evolution of the reaction. Unlike Na+ ions, Ca+2 ions notably elevate viscosity. The Casson model accurately predicts viscosity data. Results indicate that the addition of Na+ ions decreases yield stress by up to 60.4 %, while Ca+2 ions increase by up to 100.8 %. Adding Na+ ions decreases the required thermal energy by as much as 49.6 %, while the presence of Ca+2 ions can lead to a substantial increase of up to 337.1 % compared to control samples. The positive ∆G indicates a non-spontaneous gelatinization process. The addition of NaCl promotes a spontaneous reaction, while the addition of CaCl2 increases the Gibbs energy. The changes in entropy are minimal, implying minimal changes in starches' disorder structure.

Recrystallized resistant starch by encapsulation with konjac glucomannan: Structural changes, digestibility, and its effect on glucose response and short-term satiety in mice

The effects of the structure and digestibility of konjac glucomannan (KGM)-recrystallized resistant starch complex (KRS3) on the glycemic response and short-term satiety in mice were investigated. KRS3 samples were prepared by recrystallized debranched starch (RS3) at 50 °C, and then combined with KGM. The RS3 and KRS3 samples displayed an A-type pattern and maintained peak temperature values above 110 °C. With an increase in KGM, the swelling power and apparent viscosity of KRS3 increased. The results of in vitro and in vivo digestion revealed that KRS3 with a resistant starch content ranging from 69.4 % to 78.8 % could effectively maintain postprandial blood glucose levels. KRS3, particularly with 0.5 % KGM, slowed gastric emptying of mice from 82.7 % to 36.6 % and intestinal propulsion rate from 60.9 % to 35.3 %, resulting in strong satiety. RS3 combined with KGM could serve as a new approach to develop RS3 based foods with low glycemic responses and high-satiety.

Possible interaction between pectin and gluten alters the starch digestibility and texture of wheat bread

This study incorporated citrus pectin in wheat bread, aiming to develop breads with both desirable texture and slow starch digestibility. Results showed that starch digestibility in wheat bread decreased over the addition of pectin, and the maximum starch digested amount decreased by 6.6 % after the addition of 12 % pectin (wheat flour weight basis). The addition of pectin transferred part of the rapidly digestible starch into slowly digestible starch, and reduced the binding rate constant between slowly digestible starch and digestive enzymes, resulting in overall reduced starch digestibility. Furthermore, the addition of 4 % pectin contributed to the development of wheat bread with softer texture and increased specific volume. Mechanistically, the lowered starch digestibility of wheat bread after the pectin addition was due to (1) residual outermost swollen layer of starch granules, (2) protein and pectin interactions, and (3) increased short-range ordering of starch. This study, therefore, suggests that the addition of an appropriate amount of citrus pectin has the potential to develop bread with both a low glycemic index and desirable texture.

Structural and physicochemical properties of rice starch from a variety with high resistant starch and low amylose content

Research on the physicochemical properties of rice-derived endo-sperm high resistant starch (RS) with low amylose content (AC) is limited. In this study, we evaluated the physicochemical characteristics of such a starch variety and revealed that the starch granules exhibit a smoother, more refined surface with distinct edges, increased compactness, higher order of surface, and fewer cavities compared to those of a low RS rice variety. The starch crystal was classified as an A-type, which may be connected to the high amylose-lipid complex content. The branched internal long chains (B2 + B3) were abundant, allowing for easy entanglement with other molecular chains and a compact structure. Differential scanning calorimetry revealed the need for high temperature and energy to disrupt the double helix structure within the crystallization region of starch. Furthermore, starch viscosity analysis revealed a high cold paste viscosity, consistency, and setback value, with recrystallization yielding a stable structure, increased viscosity, and enhanced hydrolysis resistance to enzymes.

Applying Resistant Starch to Improve the Gel and Water Retention of Reduced-Fat Pork Batter

Emulsified meat products contain high animal fat content, and excessive intake of animal fat is not good for health, so people are paying more and more attention to reduced-fat meat products. This study investigated the impact of varying proportions of pork back-fat and/or resistant starch on the proximate composition, water and fat retention, texture properties, color, and rheology characteristic of pork batter. The results found that replacing pork back-fat with resistant starch and ice water significantly decreased the total lipid and energy contents of cooked pork batter (p < 0.05) while improving emulsion stability, cooking yield, texture, and rheology properties. Additionally, when the pork back-fat replacement ratio was no more than 50%, there was a significant increase in emulsion stability, cooking yield, hardiness, springiness, cohesiveness, chewiness, and L* and G' values (p < 0.05). Furthermore, resistant starch and ice water enhanced myosin head and tail thermal stability and increased G' value at 80 °C. However, the initial relaxation times significantly decreased (p < 0.05) and the peak ratio of P21 significantly increased from 84.62% to 94.03%, suggesting reduced fluidity of water. In conclusion, it is feasible to use resistant starch and ice water as a substitute for pork back-fat in order to produce reduced-fat pork batter with favorable gel and rheology properties.

Two-step modification of pullulanase and transglucosidase: A novel way to improve the gel strength and reduce the digestibility of rice starch

The multiscale structure, gel strength and digestibility of rice starch modified by the two-step modification of pullulanase (PUL) pretreatment and transglucosidase (TG) treatment for 6, 12, 18 and 24 h were investigated. The debranching hydrolysis of PUL produced some linear chains, which rearranged to form stable crystalline structures, reducing the digestible starch content, but weakening the gel strength. TG treatment connected some short chains to longer linear chains via α-1,6-glycosidic bonds, generating the structures of linear chain with fewer branches. The short branches promoted the interaction between starch molecules to form a more compact three-dimensional gel network structure, showing higher hardness and springiness. Moreover, these chains could form more stable crystals, reducing the digestible starch content, and the increase of branching degree inhibited digestive enzyme hydrolysis, reducing the digestion rate. The multiscale structure of starch tended to stabilize after TG treatment for 18 h, which could form a gel with stronger strength and lower digestibility than native starch gel. Therefore, the two-step modification of PUL and TG was an effective way to change the structure of rice starch to improve the gel strength and reduce the digestibility.

Structural characteristics, digestion properties, fermentation properties, and biological activities of butyrylated starch: A review

Butyrylated starch is produced by the esterification of hydroxyl groups in starch with butyryl groups, which improves the structural diversity of starch and expands its function and biological activity. The paper summarizes the structural properties and digestive properties, fermentation properties, and biological activities of butyrylated starch and describes the conformational relationships generated by the butyryl groups to reveal the underlying mechanisms. The butyryl groups replace the hydroxyl groups in starch and break the hydrogen bonds, which consequently changes the molecular, crystal, and granular structures of starch, while the starch structure also affects the distribution of the butyryl groups. Binding to the butyryl groups gives starch efficacy in resisting digestion, lowering the glycaemic index, releasing butyric acid in the colon, and regulating intestinal flora and metabolites. Relationships between starch structural parameters and butyric acid production and intestinal flora were also concluded to provide guidance for the rational design of butyrylated starch to improve efficacy. Moreover, based on its digestive and fermentation properties, butyrylated starch has exhibited good therapeutic efficacy for intestinal diseases, diabetes, polycystic ovary syndrome, and chronic restraint stress-induced abnormalities. This review provides a valuable reference for butyrylated starch advancement and utilization.

Subtle structural variations of resistant starch from whole cooked rice significantly impact metabolic outputs of gut microbiota

While cooked rice is widely consumed as a whole food, the specific characteristics and impact of its resistant starch (RS) on gut microbiota are largely unexplored. In this study, three rice varieties with distinct starch molecular structures were used to prepare RS from cooked rice. All three types of RS had a crystalline structure characterized as B + V type, with the V type being the predominant crystalline polymorph. Distinct differences in chain-length distributions were observed among different RSs, with rapidly fermentable starch fractions comprising short amylopectin and long amylose chains, while the degrees of polymerization (DPs) ∼ 10, 37, 65, and 105 fractions comprised the slowly fermentable starch. Jasmine rice RS showed the highest proportion of this slowly fermentable starch fraction, which appeared to be specifically utilized by Megasphaera_elsdenii_DSM_20460 OTU198. The fermentation of Jasmine RS resulted in the highest production of butyrate after 24 h, which was positively correlated with the relative abundance of Megasphaera_elsdenii_DSM_20460 OTU198. These findings collectively indicate that RS in cooked rice with a higher V type crystallinity and DPs ∼ 10, 37, 65, and 105 fractions promote butyrate production and stimulate the growth of butyrate-producing bacteria in the human gut, thereby conferring beneficial effects on gut health.

Harnessing the power of resistant starch: a narrative review of its health impact and processing challenges

Starch is a primary energy storage for plants, making it an essential component of many plant-based foods consumed today. Resistant starch (RS) refers to those starch fractions that escape digestion in the small intestine and reach the colon where they are fermented by the microflora. RS has been repeatedly reported as having benefits on health, but ensuring that its content remains in food processing may be challenging. The present work focuses on the impact RS on health and explores the different processes that may influence its presence in foods, thus potentially interfering with these effects. Clinical evidence published from 2010 to 2023 and studying the effect of RS on health parameters in adult populations, were identified, using PUBMED/Medline and Cochrane databases. The search focused as well on observational studies related to the effect of food processes on RS content. While processes such as milling, fermentation, cooking and heating seem to have a deleterious influence on RS content, other processes, such as cooling, cooking time, storage time, or water content, may positively impact its presence. Regarding the influence on health parameters, there is a body of evidence suggesting an overall significant beneficial effect of RS, especially type 1 and 2, on several health parameters such as glycemic response, insulin resistance index, bowel function or inflammatory markers. Effects are more substantiated in individuals suffering from metabolic diseases. The effects of RS may however be exerted differently depending on the type. A better understanding of the influence of food processes on RS can guide the development of dietary intake recommendations and contribute to the development of food products rich in RS.

Effect of different screw speeds on the structure and properties of starch straws

To illustrate the action mechanism of screw speed on the performance of starch-based straws during the extrusion process, starch-based straws at different screw speeds were prepared using a twin-screw extruder and the structures and characteristics were compared. The results indicated that as screw speeds improved from 3 Hz to 13 Hz, the A chain of amylopectin increased from 25.47 % to 28.87 %, and the B3 chain decreased from 6.34 % to 3.47 %. The absorption peak of hydroxyl group shifted from 3296 cm-1 to 3280 cm-1. The relative crystallinity reduced from 13.49 % to 9.89 % and the gelatinization enthalpy decreased from 3.5 J/g to 0.2 J/g. The performance of starch straws did not increase linearly with increasing screw speeds. The starch straw produced at screw speed of 7 Hz had the largest amylose content, the highest gelatinization temperature, the minimum bending strength, and the lowest water absorption rate in hot water (80 °C). Screw speed had a remarkable impact on the mechanical strength, toughness and hydrophobicity of starch-based straws. This study revealed the mechanism of screw speed on the mechanical strength and water resistance of starch straws in the thermoplastic extrusion process and created the theoretical basis for the industrial production of starch-based straws.

Mechanism of interaction between L-theanine and maize starch in ultrasonic field based on DFT calculations: Rheological properties, multi-scale structure and in vitro digestibility

The digestibility of starch-based foods is receiving increased attention. To date, the full understanding of how including L-theanine (THE) can modify the structural and digestive properties of starch has not been fully achieved. Here, we investigated the multi-scale structure and digestibility of maize starch (MS) regulated by THE in ultrasound field and the molecular interactions. Ultrasound disrupted the structure of starch granules and opened the molecular chains of starch, promoting increased THE binding and producing more low-order or disordered crystal structures. In this case, the aggregation of starch molecules, especially amylose, was reduced, leading to increased mobility of the systems. As a result, the apparent viscosity, G', and G" were significantly decreased, which retarded the starch regeneration. Density functional theory calculations indicated that there were mainly non-covalent interactions between THE and MS, such as hydrogen bonding and van der Waals forces. These interactions were the main factors contributing to the decrease in the short-range ordering, the helical structure, and the enthalpy change (ΔH) of MS. Interestingly, the rapidly digestible starch (RDS) content of THE modified MS (MS-THE-30) decreased by 17.89 %, while the resistant starch increased to 26.65 %. These results provide new strategies for the safe production of resistant starch.

Study of the self-assembly, drug encapsulating and delivering characteristics of short chain amylose-based type 3 resistant starch nanoparticles from Canna edulis

In developing type 3 resistant starch (RS3) from Canna edulis for use as functional food ingredients, we investigated the synthesis of C. edulis RS3 nanoparticles. Simultaneously, we explored the potential of C. edulis short-chain amylose (SCA)-based RS3 nanoparticles (RS3N) as a targeted delivery system, with a specific focus on colon targeting, yielding promising insights. Our study revealed that the degree of polymerization (DP) of C. edulis SCA, particularly the chains of DP 36- 100, exhibited a robust correlation with the particle size and physicochemical characteristics of C. edulis SCA-based RS3N. Additionally, recrystallization temperature variation (4, 25, and 45 °C) significantly influenced the self-assembly behavior of C. edulis SCA, with the preparation at 4 °C resulting in more uniform particle size distributions. In further expanding the scope of applications for C. edulis SCA-based RS3N, we harnessed the potential of Fe3O4 and curcumin (CUR) as guest molecules to assess drug encapsulation and colon-targeting capabilities. Incorporating Fe3O4 into the self-assembly system led to the production of magnetic RS3N, confirming the successful encapsulation of Fe3O4 within C. edulis SCA-based RS3N. Furthermore, in vitro experiments have demonstrated that CUR-RS3N was stable in the gastrointestinal tract and gradually released curcumin with fermentation in the colonic environment. Collectively, these findings provide invaluable insights into the intricate self-assembly behavior of C. edulis SCA with varying fine structures and recrystallization temperatures during RS3N formation. Moreover, they underscore the colon-targeted properties of C. edulis SCA-based RS3N, opening promising avenues for its application within the food industry, particularly in advanced controlled drug delivery systems.

Effects of Resistant Starch Infusion, Solely and Mixed with Xylan or Cellulose, on Gut Microbiota Composition in Ileum-Cannulated Pigs

Fermentation of dietary fiber (DF) is beneficial for gut health, but its prebiotic effects are often impeded in the distal large intestine because of the fast degradation of fermentable substrates. One way to enhance the prebiotic effect of DF is to deliver fibers to the lower parts of the gut, which can be achieved by mixing different kinds of fiber. Therefore, in the present study, an ileum-cannulated pig model was employed to investigate the fermentation influence in the large intestine by infusing resistant starch solely (RS, fast fermentable fiber) and mixing with other fibers (xylan or cellulose). Twenty-four ileum-cannulated growing pigs were divided into four groups: one control group receiving saline ileal infusions and three experimental groups infused with RS, RS with xylan, or RS with cellulose. Fecal and plasma samples were analyzed for gut microbiota composition, short-chain fatty acids (SCFAs), and blood biochemistry. Results indicated no significant differences between the RS and control group for the microbiome and SCFA concentration (p > 0.05). However, RS combined with fibers, particularly xylan, resulted in enhanced and prolonged fermentation, marked by an increase in Blautia and higher lactate and acetate production (p < 0.05). In contrast, RS with cellulose infusion enriched bacterial diversity in feces (p < 0.05). Blood biochemistry parameters showed no significant differences across groups (p > 0.05), though a trend of increased glucose levels was noted in the treatment groups (p < 0.1). Overall, RS alone had a limited impact on the distal hindgut microbiota due to rapid fermentation in the proximal gut, whereas combining RS with other fibers notably improved gut microecology by extending the fermentation process.

Including protein hydrolysates during thermal processing mitigates the starch digestion of resulted starch-based binary matrix

Staple foods with starch and protein components are usually consumed after thermal processing. To date, how including protein hydrolysates (with varied hydrolysis degrees) tailors the structure and digestion features of starch-based matrix with thermal processing has not yet been sufficiently understood. Here, corn starch (CS), soy protein isolate (SPI), and soy protein isolate hydrolysates (SPIH) with different hydrolysis time (5-60 min) were used to prepare starch-based binary matrices. With the addition of SPI or SPIH during thermal processing, the resultant binary systems exhibited higher thermal stability (breakdown visibility was increased by 1.9-10.8 times), denser networks, and fewer short-range orders (R995/1022 was decreased by up to 15.3 %). These structural changes allowed an inhibited starch digestion within the binary system, especially with increased SPI or SPIH content. Compared with CS, the content of resistant starch (RS) for CS-SPI binary complex (10:3 w/w) increased from 9.89 % to 16.69 %. Compared to SPI, SPIH inclusion displayed a stronger inhibitory effect on starch digestion since the reduced molecule size of SPIH probably enhanced its interplays with starch or amylase. For instance, the 10:3 w/w starch-SPIH 60 binary matrix possessed the highest RS content (19.07 %).

Structural, physicochemical properties and noodle-making potential of quinoa starch and type 3, type 4, and type 5 quinoa resistant starch

This study prepared type 3, type 4, and type 5 quinoa resistant starch (QRS3, QRS4, and QRS5) from quinoa starch (QS), compared their structural and physicochemical properties and evaluated their noodle-making potential. The results showed that the molecular weight of QRS3 decreased, the number of short-chain molecules increased, and its crystal type changed to B-type after gelatinization, enzymatic hydrolysis, and retrogradation. QRS4 is a phosphorylated cross-linked starch, with a surface morphology, particle size range, and crystal type similar to QS, but displaying modified thermodynamic properties. QRS5 is a complex of amylose and palmitic acid. It displays typical V-type crystals, mainly composed of long chain molecules and primarily exhibits a block morphology. The noodles prepared by replacing 20 % wheat flour with QS, QRS3 and QRS5 have higher hardness and are suitable for people who like elasticity and chewiness. QRS4 noodles are softer and suitable for people like elderly and infants who prefer soft foods. In conclusion, significant differences were evident between the fine structures, crystal types, physicochemical properties and potential applications of QS and the three QRSs. The results may expand the application of QS and QRS in the food and pharmaceutical industries.

Molecular rotor as an in-situ fluorescent probe for the degree of polymerization of α-D-1,4-glucans

Various starch synthesis and tailoring processes involve prevailing adjustments in the degree of polymerization (DP) of linear α-D-1,4-glucan chains (LGCs) for the improved functional performances. Previous studies indicated that LGCs might hinder the twisted relaxation of 9-(2-carboxy-2-cyanovinyl)-julolidine (CCVJ, a hydrophilic molecular rotor), highlighting CCVJ as a potential in-situ structural probe for LGC. In this study, glucose and its α-D-1,4 oligomers and polymers with molecular weights ranging from 0.18 kDa to 70.00 kDa were prepared as the model molecules (MM). The fluorescent emission behavior of CCVJ in various concentrations (1-5 g/L) of MM solutions or dispersions were analyzed. Results showed that for the low-DP MMs (≤ 3.98 kDa) with good aqueous stability, CCVJ emission increased by about 20 times with the DP of MMs. In contrast, CCVJ generally emitted weak DP-relevant but glucan content-dependent fluorescence in response to the interaction with high-DP MMs (> 3.98 kDa). Furthermore, a double-logarithmic linear relationship was found between the emission intensity of CCVJ and the molar-based molecular weight of glucan. The result combined with the molecular dynamic simulation suggested that CCVJ underwent surface-to-surface interaction with MMs. This study may contribute to the real-time analysis of the DP of α-D-1,4 oligoglucosides in maltodextrin and starch syrup.

A combined recrystallization and acetylation strategy for resistant starch with enhanced thermal stability and excellent short-chain fatty acid production

In this study, resistant starch (RS) with enhanced thermal stability and excellent short-chain fatty acid production was obtained using recrystallization at 50 °C of debranched waxy maize starch followed by an acetylation strategy. RS sample obtained by debranching with a 25% high concentration of native starch combined with recrystallization at 50 °C (25DBS-50 °CP) and acetylated RS (25DBS-50 °CPA) exhibited high relative crystallinity of 69.4% and 64.2%, respectively. And the peak gelatinization temperature values of them reached 116.8 °C and 111.4 °C, and the RS contents of them after cooking for 30 min remained at 35.1% and 40.0%, respectively. The acetic acid yield of 25DBS-50 °CPA was higher than that of the control group. These results indicated that recrystallization at 50 °C combined with acetylation for debranched starch could be used as a new method for regulating the digestibility and fermentation properties while developing food with a low glycemic response and specific nutritional benefits.

The impact of different concentrations of hyaluronic acid on the pasting and microstructural properties of corn starch

Starch aging in starchy foods is a major problem affecting their quality. In order to improve the viscosity and textural properties of native starch gelatinization and retrogradation, this study investigated the effect of hyaluronic acid (HA) at different concentrations (2 %, 4 %, 6 % w/w) on the pasting and microstructure of corn starch (CS). The findings revealed that the addition of HA significantly enhanced the peak viscosity, solubility, and water-holding capacity of the CS-HA mixtures. Moreover, it reduced the pasting temperature, swelling force, and leaching of amylose. All the mixtures exhibited shear thinning and thixotropic properties. The CS-HA mixtures created a thicker pseudoplastic system with significantly enhanced shear stability. The structures of the mixtures were characterized using Fourier transform infrared spectroscopy and scanning electron microscopy. It was observed that HA effectively inhibited short-term retrogradation of starch, enhanced the interaction between CS and HA, and formed a dense honeycomb three-dimensional mesh structure. In conclusion, as a novel anionic hydrocolloid, HA holds great potential to improve the retrogradation properties of starch-based products.

Study on physicochemical properties and anti-aging mechanism of wheat starch by anionic polysaccharides

The anti-aging effects of two anionic polysaccharides AG (sodium alginate)/SSPS (soluble soybean polysaccharide) and WS (wheat starch) were evaluated, and their different mechanisms were explored. The rheological properties, gelatinization properties and aging properties were characterized. The addition of AG and SSPS changed the gelatinization parameters of WS, decreased the peak viscosity, breakdown viscosity and setback viscosity, and enhanced the fluidity of the gel system. Additionally, the starch molecular orderliness experiment showed that the relative crystallinity of starch gels decreased with the increase in AG and SSPS concentrations, indicating that the rearrangement of amylopectin was disturbed, which inhibited the cross-linking of starch molecules. The water state analysis showed that the hydrophilicity of AG and SSPS and their interactions with starch molecules influenced the relaxation behavior of water protons in the gel system in a concentration-dependent manner. In conclusion, the addition of AG and SSPS could significantly inhibit the aging of WS gels, probably due to the competition effect of AG and SSPS on water and the interaction with starch molecules. The present study results would provide new theoretical insights into WS-based food research.

Characterization, health benefits, and food applications of enzymatic digestion- resistant dextrin: A review

Resistant dextrin or resistant maltodextrin (RD), a short-chain glucose polymer that is highly resistant to hydrolysis by human digestive enzymes, has shown broad developmental prospects in the food industry and has gained substantial attention owing to its lack of undesirable effects on the sensory features of food or the digestive system. However, comprehensive fundamental and application information on RD and how RD improves anti-diabetes and obesity have not yet been received. Therefore, the characterization, health benefits and application of RD in various fields are summarized and discussed in the current study. Typically, RD is prepared by the acid thermal method and possesses excellent physicochemical properties, including low viscosity, high solubility, storage stability, and low retro-gradation, which are correlated with its low molecular weight (Mw) and non-digestible glycosidic linkages. In contrast, RD prepared by the simultaneous debranching and crystallization method has low solubility and high crystallinity. The ingestion of RD can positively affect metabolic diseases (diabetes and obesity) in animals and humans by producing short-chain fatty acids (SCFAs), and facilitating the inflammatory response. Moreover, RD has been widely used in the beverage, dairy products, and dessert industries due to its nutritional value and textural properties without unacceptable quality loss. More studies are required to further explore RD application potential in the food industry and its role in the management of different chronic metabolic disorders.

Altering structure and enzymatic resistance of high-amylose maize starch by irradiative depolymerization and annealing with palmitic acid as V-type inclusion compound

This study explored a new physical modification approach to regulate enzymatic resistance of high-amylose starch for potentially better nutritional outcomes. High-amylose maize starch (HAMS) was subjected to chain depolymerization by electron beam irradiation (EBI), followed by inducing ordered structure through annealing in palmitic acid solution (APAS). APAS treatment significantly promotes the formation of ordered structure. Starch after the combinative modification showed up to 5.2 % increase in total crystallinity and up to 1.2 % increase in V-type fraction. The EBI-APAS modification led to increased gelatinization temperature (from 66.1 to 87.6 °C) and reduced final digested percentage under in vitro stimulated digestion conditions. The moderate extent of depolymerization resulted in higher enzymatic resistance, indicating that the extent of depolymerization is crucial in EBI-APAS modification. Pearson analysis showed a significant correlation between gelatinization onset temperature and digestion kinetic parameter (k1, rate constant of fast-phase digestion). Overall, the result suggests that ordered structures of degraded molecules induced by the combinative modification contribute to the enzymatic resistance of starch. This study sheds lights on future applications of EBI-APAS approach to regulate multi-scale structures and nutritional values of high-amylose starch.

Starch-ascorbyl palmitate inclusion complex, a type 5 resistant starch, reduced in vitro digestibility and improved in vivo glycemic response in mice

The prevalence of type 2 diabetes (T2D) has become a major public health concern worldwide. Slowly digested or indigestible carbohydrates such as resistant starch (RS) are associated with a low glycemic index (GI) and the decreased risk of developing T2D. Recently, starch inclusion complexes (ICs) have raised attention due to their thermally stable structure and high RS content. In this study, starch-ascorbyl palmitate (AP) ICs were produced using two different methods with hydrothermal treatments performed, and their in vitro digestion kinetics and in vivo glycemic response in C57BL/6J mice were investigated to determine their potential as a new type of RS, i.e., RS5. After treatments of annealing followed by acid hydrolysis (ANN-ACH), IC samples produced by both methods retained V-type crystalline structure. Either in their raw or treated conditions, V6h-AP ICs prepared using the "empty" V-type method exhibited a more favorable hydrolysis pattern as compared to its counterpart produced by the DMSO method in terms of a lower hydrolysis rate and equilibrium concentration (C∞) (p < 0.05). From the in vitro results, the ANN-ACH treated V6h-AP IC exhibited an estimated GI (eGI) value of 54.83, falling within the range of low GI foods and was the lowest among all tested samples (p < 0.05). Consistent with the in vitro digestion kinetics, the in vivo results showed that mice fed with ANN-ACH V6h-AP IC exhibited a modest glycemic response as evidenced by the lowest increase in postprandial blood glucose and AUC blood glucose (p < 0.05). In addition, the in vivo GI of the ANN-ACH V6h-AP IC (39.53) was the lowest among all the sample treatments and was even lower than that of the RS2 comparison (56, p < 0.05), indicating its more pronounced effect in modulating the postprandial glycemic response in mice and great potential as a new RS5.

Structural and Physicochemical Properties of a Chinese Yam Starch-Tea Polyphenol Complex Prepared Using Autoclave-Assisted Pullulanase Treatment

Interactions between food components have a positive impact in the field of food science. In this study, the effects of tea polyphenol on the structural and physicochemical properties of Chinese yam starch using autoclave-assisted pullulanase treatment were investigated. X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, rapid visco analysis, differential scanning calorimetry, and the 3,5-dinitrosalicylic acid method were applied in this study. The results showed that the Chinese yam starch-tea polyphenol complex formed a structural domain with higher thermal stability along with lower pasting viscosities than native starch. The in vitro digestibility of Chinese yam starch decreased with the addition of the tea polyphenol, and the amount of resistant starch content in the complex was 56.25 ± 1.37%, significantly higher than that of native starch (p < 0.05). In addition, the complex showed a B+V-type crystalline structure, which confirmed that the interaction modes between the starch and tea polyphenol include hydrogen bonding and hydrophobic interactions. Moreover, the appearance of an irregular sponge network structure of the complex further supported the interactions between the starch and tea polyphenol. This study provides a theoretical basis for the development of functional foods using Chinese yam starch.

Multi-scale structural characteristics of black Tartary buckwheat resistant starch by autoclaving combined with debranching modification

The impact of autoclaving or autoclave-debranching treatments on the multi-scale structure of resistant starch (RS) and the relationship with starch digestion remains unclear, despite their widespread use in its preparation. This work investigated the relationship between RS structure in black Tartary buckwheat and its digestibility by analyzing the effects of autoclaving and autoclave-debranching combined treatments on the multi-scale structure of RS. The results showed that black Tartary buckwheat RS exhibited a more extensive honeycomb-like network structure and enhanced thermal stability than either black Tartary buckwheat native starch (BTBNS) or common buckwheat native starch (CBNS). Autoclaving and autoclaving-debranching converted A-type native starch to V-type and possibly the formation of flavonoid-starch complexes. Autoclaving treatment significantly increased the proportion of short A chain (DP 6-12) and the amylose (AM) content, reduced the viscosity and the total crystallinity. Notably, the autoclave-debranching co-treatment significantly enhanced the resistance of starch to digestion, promoted the formation of perfect microcrystallines, and increased the AM content, short-range ordered degree, and the proportion of long B2 chain (DP 25-36). This study reveals the relationship between the multi-scale structure and digestibility of black Tartary buckwheat RS by autoclaving combined with debranching modification.