Chemistry. Toward substitution with no regrets

Alternatives assessment: An analysis on progress and future needs for research and practice

Alternatives assessment is a science-policy approach to support the informed substitution of chemicals of concern in consumer products and industries, with the intent of avoiding regrettable substitution and facilitating the transition to safer, more sustainable chemicals and products. The field of alternatives assessment has grown steadily in recent decades, particularly after the publication of specific frameworks and the inclusion of substitution and alternatives assessment requirements in a number of policy contexts. Previously, 14 research and practice needs for the field were outlined across five critical areas: comparative hazard assessment, comparative exposure characterization, lifecycle considerations, decision-making and decision analysis, and professional practice. The aim of the current article is twofold: to highlight methodological advances in the growing field of alternatives assessment based on identified research and practice needs and to propose areas for future developments. We assess advances in the field based on the analysis of a broad literature review that captured 154 sources published from 2013 to 2022. The results indicate that research conducted advanced many of the needs identified, but several remain underaddressed. Although the field has clearly grown and taken root over the past decade, there are still research and practice gaps, most notably on the hazard assessment of mixtures or different forms of chemicals, the integration of lifecycle considerations, and the development of practical approaches to address trade-offs in decision-making. We propose modifications to four of the prior research and practice needs in addition to new needs, including the development of standardized hazard assessment approaches for chemical mixtures as well as better integration of equity and/or justice considerations into assessments. Integr Environ Assess Manag 2024;20:1337-1354. © 2023 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

The Stockholm Convention at a Crossroads: Questionable Nominations and Inadequate Compliance Threaten Its Acceptance and Utility

Twenty years since coming into force, the Stockholm Convention has become a "living" global agreement that has allowed for the addition of substances that are likely, as a result of their long-range environmental transport (LRET), to lead to significant adverse effects. The recent listing of the phenolic benzotriazole UV-328 in Annex A and a draft nomination of three cyclic volatile methylsiloxanes (cVMS) for Annex B draw attention to the fact that many chemicals are subject to LRET and that this can lead to questionable nominations. The nomination of UV-328 and the draft nomination of cVMS also raise the spectre of regrettable substitutions. At the same time, atmospheric monitoring across the globe reveals that environmental releases of several unintentionally produced POPs listed in Annex C, such as hexachlorobenzene and hexachlorobutadiene, are continuing unabated, highlighting shortcomings in the enforcement of the minimum measures required under Article 5. There is also no evidence of efforts to substitute a chemical whose use has been known for three decades to unintentionally produce polychlorinated biphenyls. These developments need to be rectified to safeguard the long-term viability and acceptance of a global treaty of undeniable importance.

Emerging contaminants: A One Health perspective

Environmental pollution is escalating due to rapid global development that often prioritizes human needs over planetary health. Despite global efforts to mitigate legacy pollutants, the continuous introduction of new substances remains a major threat to both people and the planet. In response, global initiatives are focusing on risk assessment and regulation of emerging contaminants, as demonstrated by the ongoing efforts to establish the UN's Intergovernmental Science-Policy Panel on Chemicals, Waste, and Pollution Prevention. This review identifies the sources and impacts of emerging contaminants on planetary health, emphasizing the importance of adopting a One Health approach. Strategies for monitoring and addressing these pollutants are discussed, underscoring the need for robust and socially equitable environmental policies at both regional and international levels. Urgent actions are needed to transition toward sustainable pollution management practices to safeguard our planet for future generations.

Global environmental and toxicological impacts of polybrominated diphenyl ethers versus organophosphate esters: A comparative analysis and regrettable substitution dilemma

The prevalence of organophosphate esters (OPEs) in the global environment is increasing, which aligns with the decline in the usage of polybrominated diphenyl ethers (PBDEs). PBDEs, a category of flame retardants, were banned and classified as persistent organic pollutants (POPs) through the Stockholm Convention due to their toxic and persistent properties. Despite a lack of comprehensive understanding of their ecological and health consequences, OPEs were adopted as replacements for PBDEs. This research aims to offer a comparative assessment of PBDEs and OPEs in various domains, specifically focusing on their persistence, bioaccumulation, and toxicity (PBT) properties. This study explored physicochemical properties (such as molecular weight, octanol-water partition coefficient, octanol-air partition coefficient, Henry's law constant, and vapor pressures), environmental behaviors, global concentrations in environmental matrices (air, water, and soil), toxicities, bioaccumulation, and trophic transfer mechanisms of both groups of compounds. Based on the comparison and analysis of environmental and toxicological data, we evaluate whether OPEs represent another instance of regrettable substitution and global contamination as much as PBDEs. Our findings indicate that the physical and chemical characteristics, environmental behaviors, and global concentrations of PBDEs and OPEs, are similar and overlap in many instances. Notably, OPE concentrations have even surged by orders of several magnitude compared to PBDEs in certain pristine regions like the Arctic and Antarctic, implying long-range transport. In many instances, air and water concentrations of OPEs have been increased than PBDEs. While the bioaccumulation factors (BAFs) of PBDEs (ranging from 4.8 to 7.5) are slightly elevated compared to OPEs (-0.5 to 5.36) in aquatic environments, both groups of compounds exhibit BAF values beyond the threshold of 5000 L/kg (log10 BAF > 3.7). Similarly, the trophic magnification factors (TMFs) for PBDEs (ranging from 0.39 to 4.44) slightly surpass those for OPEs (ranging from 1.06 to 3.5) in all cases. Metabolic biotransformation rates (LogKM) and hydrophobicity are potentially major factors deciding their trophic magnification potential. However, many compounds of PBDEs and OPEs show TMF values higher than 1, indicating biomagnification potential. Collectively, all data suggest that PBDEs and OPEs have the potential to bioaccumulate and transfer through the food chain. OPEs and PBDEs present a myriad of toxicity endpoints, with notable overlaps encompassing reproductive issues, oxidative stress, developmental defects, liver dysfunction, DNA damage, neurological toxicity, reproductive anomalies, carcinogenic effects, and behavior changes. Based on our investigation and comparative analysis, we conclude that substituting PBDEs with OPEs is regrettable based on PBT properties, underscoring the urgency for policy reforms and effective management strategies. Addressing this predicament before an exacerbation of global contamination is imperative.

Isothiazolinone Disrupts Reproductive Endocrinology by Targeting the G-Protein-Coupled Receptor Signaling

The unintended exposure of humans and animals to isothiazolinones has led to an increasing concern regarding their health hazards. Isothiazolinones were previously found to disrupt reproductive endocrine homeostasis. However, the long-term reproductive toxicity and underlying mechanism remain unclear. In this study, life-cycle exposure of medaka to dichlorocthylisothiazolinone (DCOIT), a representative isothiazolinone, significantly stimulated the gonadotropin releasing hormone receptor (GnRHR)-mediated synthesis of follicle stimulating hormone and luteinizing hormone in the brain. Chem-Seq and proteome analyses revealed disturbances in the G-protein-coupled receptor, MAPK, and Ca2+ signaling cascades by DCOIT. The G protein αi subunit was identified as the binding target of DCOIT. Gαi bound by DCOIT had an enhanced affinity for the mitochondrial calcium uniporter, consequently changing Ca2+ subcellular compartmentalization. Stimulation of Ca2+ release from the endoplasmic reticulum and blockage of Ca2+ uptake into the mitochondria resulted in a considerably higher cytoplasmic Ca2+ concentration, which then activated the phosphorylation of MEK and ERK to dysregulate hormone synthesis. Overall, by comprehensively integrating in vivo, ex vivo, in silico, and in vitro evidence, this study proposes a new mode of endocrine disrupting toxicity based on isothiazolinones, which is expected to aid the risk assessment of the chemical library and favor the mechanism-driven design of safer alternatives.

Learning from Safe-by-Design for Safe-and-Sustainable-by-Design: Mapping the current landscape of Safe-by-Design reviews, case studies, and frameworks

With the introduction of the European Commission's "Safe and Sustainable-by-Design" (SSbD) framework, the interest in understanding the implications of safety and sustainability assessments of chemicals, materials, and processes at early-innovation stages has skyrocketed. Our study focuses on the "Safe-by-Design" (SbD) approach from the nanomaterials sector, which predates the SSbD framework. In this assessment, SbD studies have been compiled and categorized into reviews, case studies, and frameworks. Reviews of SbD tools have been further classified as quantitative, qualitative, or toolboxes and repositories. We assessed the SbD case studies and classified them into three categories: safe(r)-by-modeling, safe(r)-by-selection, or safe(r)-by-redesign. This classification enabled us to understand past SbD work and subsequently use it to define future SSbD work so as to avoid confusion and possibilities of "SSbD-washing" (similar to greenwashing). Finally, the preexisting SbD frameworks have been studied and contextualized against the SSbD framework. Several key recommendations for SSbD based on our analysis can be made. Knowledge gained from existing approaches such as SbD, green and sustainable chemistry, and benign-by-design approaches needs to be preserved and effectively transferred to SSbD. Better incorporation of chemical and material functionality into the SSbD framework is required. The concept of lifecycle thinking and the stage-gate innovation model need to be reconciled for SSbD. The development of high-throughput screening models is critical for the operationalization of SSbD. We conclude that the rapid pace of both SbD and SSbD development necessitates a regular mapping of the newly published literature that is relevant to this field.

Toward Property-Based Regulation

An expanding web of adverse impacts on people and the environment has been steadily linked to anthropogenic chemicals and their proliferation. Central to this web are the regulatory structures intended to protect human and environmental health through the control of new molecules. Through chronically insufficient and inefficient action, the current chemical-by-chemical regulatory approach, which considers regulation at the level of chemical identity, has enabled many adverse impacts to develop and persist. Recognizing the link between fundamental physicochemical properties and hazards, we describe a new paradigm─property-based regulation. By regulating physicochemical properties, we show how governments can delineate and enforce safe chemical spaces, increasing the scalability of chemical assessments, reducing the time and resources to regulate a substance, and providing transparency for chemical designers. We highlight sparse existing property-based approaches and demonstrate their applicability using bioaccumulation as an example. Finally, we present a path to implementation in the United States, prescribing roles and steps for government, nongovernmental organizations, and industry to accelerate this transition, to the benefit of all.

Computational models to confront the complex pollution footprint of plastic in the environment

The threat posed by plastic in the environment is poorly characterized due to uncertainties and unknowns about sources, transport, transformation and removal processes, and the properties of the plastic pollution itself. Plastic creates a footprint of particulate pollution with a diversity of composition, size and shape, and a halo of chemicals. In this Perspective, we argue that process-based mass-balance models could provide a platform to synthesize knowledge about plastic pollution as a function of its measurable intrinsic properties.

Lessons Learned from the Grouping of Chemicals to Assess Risks to Human Health

In analogy to the periodic system that groups elements by their similarity in structure and chemical properties, the hazard of chemicals can be assessed in groups having similar structures and similar toxicological properties. Here we review case studies of chemical grouping strategies that supported the assessment of hazard, exposure, and risk to human health. By the EU-REACH and the US-TSCA New Chemicals Program, structural similarity is commonly used as the basis for grouping, but that criterion is not always adequate and sufficient. Based on the lessons learned, we derive ten principles for grouping, including: transparency of the purpose, criteria, and boundaries of the group; adequacy of methods used to justify the group; and inclusion or exclusion of substances in the group by toxicological properties. These principles apply to initial grouping to prioritize further actions as well as to definitive grouping to generate data for risk assessment. Both can expedite effective risk management.

Generation of FeIV =O and its Contribution to Fenton-Like Reactions on a Single-Atom Iron-N-C Catalyst

Generating Fe^IV =O on single-atom catalysts by Fenton-like reaction has been established for water treatment; however, the Fe^IV =O generation pathway and oxidation behavior remain obscure. Employing an Fe-N-C catalyst with a typical Fe-N₄ moiety to activate peroxymonosulfate (PMS), we demonstrate that generating Fe^IV =O is mediated by an Fe-N-C-PMS* complex-a well-recognized nonradical species for induction of electron-transfer oxidation-and we determined that adjacent Fe sites with a specific Fe₁ -Fe₁ distance are required. After the Fe atoms with an Fe₁ -Fe₁ distance <4 Å are PMS-saturated, Fe-N-C-PMS* formed on Fe sites with an Fe₁ -Fe₁ distance of 4-5 Å can coordinate with the adjacent Fe^II -N₄ , forming an inter-complex with enhanced charge transfer to produce Fe^IV =O. Fe^IV =O enables the Fenton-like system to efficiently oxidize various pollutants in a substrate-specific, pH-tolerant, and sustainable manner, where its prominent contribution manifests for pollutants with higher one-electron oxidation potential.

Computer-Aided Discovery and Redesign for Respiratory Sensitization: A Tiered Mechanistic Model to Deliver Robust Performance Across a Diverse Chemical Space

Asthma is among the most common occupational diseases with considerable public health and economic costs. Chemicals that induce hypersensitivity in the airways can cause respiratory distress and comorbidities with respiratory infections such as COVID. Robust predictive models for this end point are still elusive due to the lack of an experimental benchmark and the over-reliance of existing in silico tools on structural alerts and structural (vs chemical) similarities. The Computer-Aided Discovery and REdesign (CADRE) platform is a proven strategy for providing robust computational predictions for hazard end points using a tiered hybrid system of expert rules, molecular simulations, and quantum mechanics calculations. The recently developed CADRE model for respiratory sensitization is based on a highly curated data set of structurally diverse chemicals with high-fidelity biological data. The model evaluates absorption kinetics in lung mucosa using Monte Carlo simulations, assigns reactive centers in a molecule and possible biotransformations via expert rules, and determines subsequent reactivity with cell proteins via quantum-mechanics calculations using a multi-tiered regression. The model affords an accuracy above 0.90, with a series of external validations based on literature data in the range of 0.88-0.95. The model is applicable to all low-molecular-weight organics and can inform not only chemical substitution but also chemical redesign to advance development of safer alternatives.

Volatility and Nonspecific van der Waals Interaction Properties of Per- and Polyfluoroalkyl Substances (PFAS): Evaluation Using Hexadecane/Air Partition Coefficients

Per- and polyfluoroalkyl substances (PFAS) form weak van der Waals (vdW) interactions, which render this class of chemicals more volatile than nonfluorinated analogues. Here, the hexadecane/air partition coefficient (KHxd/air) values at 25 °C, as an index of vdW interaction strength and volatility, were determined for 64 neutral PFAS using the variable phase ratio headspace and gas chromatographic retention methods. Log KHxd/air values increased linearly with increasing number of CF2 units, and the increase in log KHxd/air value per CF2 was smaller than that per CH2. Comparison of PFAS sharing the same perfluoroalkyl chain length but with different functional groups demonstrated that KHxd/air was highest for the N-alkyl perfluoroalkanesulfonamidethanols and lowest for the perfluoroalkanes and that the size of the nonfluorinated structure determines the difference in KHxd/air between PFAS groups. Two models, the quantum chemistry-based COSMOtherm model and an iterative fragment selection quantitative structure-property relationship (IFS-QSPR) model, accurately predicted the log KHxd/air values of the PFAS with root-mean-square errors of 0.55 and 0.35, respectively. COSMOtherm showed minor systematic errors for all PFAS, whereas IFS-QSPR exhibited large errors for a few PFAS groups that were outside the model applicability domain. The present data set will be useful as a benchmark of the volatilities of the various PFAS and for predicting other partition coefficient values of PFAS.

Human Apparent Volume of Distribution Predicts Bioaccumulation of Ionizable Organic Chemicals in Zebrafish Embryos

Chemicals with elevated bioaccumulation profiles present potential hazards to public health and the environment. Ionizable organic compounds (IOCs) increasingly represent a large proportion of commercial chemicals; however, historical approaches for bioaccumulation determinations are mainly developed for neutral chemicals, which were not appropriate for IOCs. Herein, we employed the zebrafish embryo, a common vertebrate model in environmental and biomedical studies, to elucidate toxicokinetics and bioconcentration of eight IOCs with diverse physicochemical properties and pharmacokinetic parameters. At an environmentally relevant pH (7.5), most IOCs exhibited rapid uptake and depuration in zebrafish, suggesting the ionized forms of IOCs are readily bioavailable. Bioconcentration factors (BCF) of these IOCs ranged from 0.0530 to 250 L·kg^-1 wet weight. The human pharmacokinetic proportionality factor, apparent volume of distribution (V_D), better predicted the BCF of selected IOCs than more commonly used hydrophobicity-based parameters (e.g., pH-dependent octanol-water distribution ratio, D_ow). Predictive bioaccumulation models for IOCs were constructed and validated using V_D alone or with D_ow. Significant relationships between fish BCF and human V_D, which is readily available for pharmaceuticals, highlighted the utility of biologically based "read-across" approaches for predicting bioaccumulative potential of IOCs. Our novel findings thus provided an understanding of the partitioning behavior and improved predictive bioconcentration modeling for IOCs.

Differences in barriers for controlled learning about safety between biotechnology and chemistry

In contrast to chemical industry, biotechnology is still not competitive for the production of chemicals, materials, and biofuels. Here, the authors discuss the underlying reasons and propose to address the problem through regulatory changes and risk management.

A sensitive environmental forensic method that determines bisphenol S and A exposure within receipt-handling through fingerprint analysis

As human beings have been consistently exposed to bisphenol A (BPA) and bisphenol S (BPS) derived from various products, the intake of BPS/BPA to humans has been extensively studied. However, using conventional biological matrices such as urine, blood, or dissected skin to detect BPS/BPA in the human body system requires longer exposure time to them, hardly defines the pollutant source of the accumulated BPS/BPA, and is often invasive. Herein, our new approach i.e. fingerprint analysis quantitatively confirms the transfer of BPS/BPA from receipts (specific pollution source) to human skin only within receipt-handling of "20 s". When receipts (fingertip region size; ~1 cm²) containing 100-300 μg of BPS or BPA are handled, 20-40 μg fingerprint^-1 of BPS or BPA is transferred to human skin (fingertip). This transferred amount of BPS/BPA can still be toxic according to the toxicity test using water fleas. As a visual evidence, a fingerprint map that matches the distribution of the absorbed BPS/BPA is developed using a mass spectrometry imaging tool. This is the first study to analyze fingerprints to determine the incorporation mechanism of emerging pollutants. This study provides an efficient and non-invasive environmental forensic tool to analyze amounts and sources of hazardous substances.

In situ preparation of a ferric polymeric aluminum chloride–silica gel nanocatalyst by mechanical grinding and its solid-phase catalytic behavior in organic synthesis

PLASC catalysts have significant green chemistry properties and can be used as new cheap, efficient and green catalysts.

Evaluating green silver nanoparticles as prospective biopesticides: An environmental standpoint

The current method of agriculture entails the usage of excessive amounts of pesticides and fertilizers. The blatant use of conventional pesticides and fertilizers over several decades has led to their bioaccumulation with adverse effects on soil biodiversity and the development of resistance by pests. With the decline in clinically useful antibiotics and increase in multi drug resistant microbes, it is imperative to develop new and effective antimicrobial therapies. Growing awareness and demand for efficacious biorational pesticides are on the rise. Silver nanoparticles are widely known antimicrobials and have been in use for several purposes for a long time. This work reviews the implications of applying silver nanoparticles in agriculture and their possible consequences. The physiological and biochemical changes in plants due to the uptake of silver nanoparticles as a consequence of its morphology, capping biomolecules and method of application are comprehensively discussed in this review article. Studies on tolerance levels or stress due to silver nanoparticles by variation in concentration/doses on diverse flora and fauna are also analyzed here. Further, phytotoxicity and genotoxicity due to the metal as well as its transformation in soil, water and sludge are taken into account. We also gauge the potential of biogenic silver nanoparticles-viable antimicrobial agents for enhanced applications in agriculture as biopesticides.

Acylamido-based anion-functionalized ionic liquids for efficient synthesis of poly(isosorbide carbonate)

A catalytic system containing an acylamido-based anion was developed for the synthesis of bio-based polycarbonate by efficient activation of monomers.

Structural basis for molecular recognition of G protein-coupled estrogen receptor by selected bisphenols

Complicated ligand-dependent signaling pathways of bisphenol A (BPA) and its analogues involve not only intranuclear estrogen receptor but also membrane receptor G protein-coupled estrogen receptor (GPER). However, the structural basis for molecular recognition of GPER by the environmental chemicals remains unknown. To reveal the structural dependence of GPER recognition by bisphenols, a systematic molecular dynamics simulation study was performed for selected bisphenols with different electron hybrid orbitals and substituents on their C atoms connecting two phenol rings. BPA was used as a control, bisphenol C(BPC) as an example for a connecting C with sp² hybrid orbitals to provide more ligand rigidity, bisphenol E(BPE) and bisphenol F(BPF) for decreased steric hindrance and hydrophobicity around the connecting C, and bisphenol B(BPB) and bisphenol AF(BPAF) for increased hydrophobicity and steric hindrance. All the tested bisphenols can bind with GPER at its classic orthosteric site to obtain GPER-ligand complexes, while van der Waals interactions and direct inter-molecular electrostatic energies provide the driving forces for ligand binding. Bulky substituents and structural rigidity of the connecting C dramatically impair hydrogen bonding between GPER and the bisphenols, which results in decreased contribution of both favorable intermolecular hydrogen bonds and unfavorable polar solvation effect to complex stability of BPB and BPC since decreased number of key residues is expected. Increase in substituent lipophilicity enhances the van der Waals interactions and favorable non-polar solvation effect. The six bisphenols of high structural similarity shared two key recognition residues, Leu137^TM3 and Trp272^TM6, the latter of which was in the highly conserved CWxP motif of TM6 and has been reported as key residue for G protein-coupled receptor activation. Based on the obtained knowledge, GPER affinity and relevant toxicity of BPA alternatives can be easily predicted, and the calculated binding free energies are consistent with the available experimental observations.

Chemical contaminant exposures assessed using silicone wristbands among occupants in office buildings in the USA, UK, China, and India

Little is known about chemical contaminant exposures of office workers in buildings globally. Complex mixtures of harmful chemicals accumulate indoors from building materials, building maintenance, personal products, and outdoor pollution. We evaluated exposures to 99 chemicals in urban office buildings in the USA, UK, China, and India using silicone wristbands worn by 251 participants while they were at work. Here, we report concentrations of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and other brominated flame retardants (BFRs), organophosphate esters (OPEs), phthalates and phthalate alternatives, pesticides, and polycyclic aromatic hydrocarbons (PAHs). First, we found major differences in office worker chemical exposures by country, some of which can be explained by regulations and use patterns. For example, exposures to several pesticides were substantially higher in India where there were fewer restrictions and unique malaria challenges, and exposures to flame retardants tended to be higher in the USA and UK where there were historic, stringent furniture flammability standards. Higher exposures to PAHs in China and India could be due to high levels of outdoor air pollution that penetrates indoors. Second, some office workers were still exposed to legacy PCBs, PBDEs, and pesticides, even decades after bans or phase-outs. Third, we identified exposure to a contemporary PCB that is not covered under legacy PCB bans due to its presence as an unintentional byproduct in materials. Fourth, exposures to novel BFRs, OPEs, and other chemicals commonly used as substitutes to previously phased-out chemicals were ubiquitous. Fifth, some exposures were influenced by individual factors, not just countries and buildings. Phthalate exposures, for example, were related to personal care product use, country restrictions, and building materials. Overall, we found substantial country differences in chemical exposures and continued exposures to legacy phased-out chemicals and their substitutes in buildings. These findings warrant further research on the role of chemicals in office buildings on worker health.

Zinc oxide-induced changes to sunscreen ingredient efficacy and toxicity under UV irradiation

Sunscreen safety and efficacy is generally evaluated based upon the properties of the individual chemicals in a formulation. However, the photostability of sunscreens has been shown to be highly dependent on the mixture of chemicals present. To better understand how sunscreen formulation influences stability, and to establish a foundation for probing the influence of zinc oxide additives, we formulated five different small-molecule based ultraviolet-filter (UV-filter) mixtures with a Sun Protection Factor (SPF) of 15. These mixtures contained active ingredients approved in either the United States or European Union and were designed to represent formulations of actual products on the market. We evaluated the photostability and toxicity of these mixtures in the absence and presence of zinc oxide after UV exposure for two hours. Changes in UV absorbance were minimal for all five small-molecule-based mixtures without zinc oxide. The presence of either micro- or nano-sized zinc oxide caused significant small-molecule photodegradation and the degraded mixtures exhibited higher levels of toxicity in embryonic zebrafish assays. This study suggests that caution must be taken when formulating sunscreens containing both zinc oxide and small-molecule UV-filters to avoid unintended consequences during use.

Determination and occurrence of bisphenol A and thirteen structural analogs in soil

Bisphenol A is a phenolic plasticizer used in the production of various plastic products. Its endocrine-disrupting effects on ecological and human health lead to replacement with its structural analogs. The occurrence of these analogs in the soil environment, which is an important sink for bisphenols, has been rarely reported. In this study, a robust method was developed to determine bisphenol A and 13 analogs in soil using accelerated solvent extraction combined with in-line purification for fast and efficient extraction and ultra-performance liquid chromatography-tandem mass spectrometry for simultaneous and accurate quantification. The method detection limits of 14 bisphenols were between 0.01 and 0.39 ng g^-1, and the recoveries were in the range of 80%-120%. The developed method was applied to 29 agricultural and urban soil samples from 21 provinces in China, and 12 bisphenols were detected. Among them, the contents of bisphenol A, F, and P were up to 166.0, 212.9, and 78.2 ng g^-1 dry weight, respectively. The maximum concentration of bisphenol P was at least ten times higher than literature values in food and other environmental matrices. The results of this study showed that "hot spots" existed for bisphenol pollution in soil and that further investigations were necessary to avoid regrettable substitutions.

Deep Dive into Plastic Monomers, Additives, and Processing Aids

A variety of chemical substances used in plastic production may be released throughout the entire life cycle of the plastic, posing risks to human health, the environment, and recycling systems. Only a limited number of these substances have been widely studied. We systematically investigate plastic monomers, additives, and processing aids on the global market based on a review of 63 industrial, scientific, and regulatory data sources. In total, we identify more than 10'000 relevant substances and categorize them based on substance types, use patterns, and hazard classifications wherever possible. Over 2'400 substances are identified as substances of potential concern as they meet one or more of the persistence, bioaccumulation, and toxicity criteria in the European Union. Many of these substances are hardly studied according to SciFinder (266 substances), are not adequately regulated in many parts of the world (1'327 substances), or are even approved for use in food-contact plastics in some jurisdictions (901 substances). Substantial information gaps exist in the public domain, particularly on substance properties and use patterns. To transition to a sustainable circular plastic economy that avoids the use of hazardous chemicals, concerted efforts by all stakeholders are needed, starting by increasing information accessibility.

Avoiding Regrettable Substitutions: Green Toxicology for Sustainable Chemistry

Green chemistry seeks to design less hazardous chemicals, but many of the efforts to replace chemicals have resulted in so-called "Regrettable Substitutions", when a chemical with an unknown or unforeseen hazard is used to replace a chemical identified as problematic. Here, we discuss the literature on regrettable substitution and focus on an oft-mentioned case, Bisphenol A, which was replaced with Bisphenol S-and the lessons that can be learned from this history. In particular, we focus on how Green Toxicology can offer a way to make better substitutions.

Biomass-derived chemical substitutes for bisphenol A: recent advancements in catalytic synthesis

Bisphenol A is an oil-derived, large market volume chemical with a wide spectrum of applications in plastics, adhesives and thermal papers. However, bisphenol A is not considered safe due to its endocrine disrupting properties and reproductive toxicity. Several functional substitutes of bisphenol A have been proposed in the literature, produced from plant biomass. Unless otherwise specified, the present review covers the most significant contributions that appeared in the time span January 2015-August 2019, describing the sustainable catalytic synthesis of rigid diols from biomass derivatives. The focus is thereupon on heterogeneous catalysis, use of green solvents and mild conditions, cascade processes in one-pot, and continuous flow setups. More than 500 up-to-date references describe the various substitutes proposed and the catalytic methods for their manufacture, broken down according to the main biomass types from which they originate.

Bisphenols exert detrimental effects on neuronal signaling in mature vertebrate brains

Bisphenols are important plasticizers currently in use and are released at rates of hundreds of tons each year into the biosphere^1–3. However, for any bisphenol it is completely unknown if and how it affects the intact adult brain^4–6, whose powerful homeostatic mechanisms could potentially compensate any effects bisphenols might have on isolated neurons. Here we analyzed the effects of one month of exposition to BPA or BPS on an identified neuron in the vertebrate brain, using intracellular in vivo recordings in the uniquely suited Mauthner neuron in goldfish. Our findings demonstrate an alarming and uncompensated in vivo impact of both BPA and BPS—at environmentally relevant concentrations—on essential communication functions of neurons in mature vertebrate brains and call for the rapid development of alternative plasticizers. The speed and resolution of the assay we present here could thereby be instrumental to accelerate the early testing phase of next-generation plasticizers.

Elisabeth Schirmer, Stefan Schuster and Peter Machnik investigated the effects of bisphenols A and S on neuronal functioning. Using in vivo recordings in goldfish they demonstrate that basic neuronal properties such as action potentials and synaptic transmission are perturbed after chronic exposure to bisphenols.

Organophosphorus flame retardants are developmental neurotoxicants in a rat primary brainsphere in vitro model

Due to regulatory bans and voluntary substitutions, halogenated polybrominated diphenyl ether (PBDE) flame retardants (FR) are increasingly substituted by mainly organophosphorus FR (OPFR). Leveraging a 3D rat primary neural organotypic in vitro model (rat brainsphere), we compare developmental neurotoxic effects of BDE-47-the most abundant PBDE congener-with four OPFR (isopropylated phenyl phosphate-IPP, triphenyl phosphate-TPHP, isodecyl diphenyl phosphate-IDDP, and tricresyl phosphate (also known as trimethyl phenyl phosphate)-TMPP). Employing mass spectroscopy-based metabolomics and transcriptomics, we observe at similar human-relevant non-cytotoxic concentrations (0.1-5 µM) stronger developmental neurotoxic effects by OPFR. This includes toxicity to neurons in the low µM range; all FR decrease the neurotransmitters glutamate and GABA (except BDE-47 and TPHP). Furthermore, n-acetyl aspartate (NAA), considered a neurologic diagnostic molecule, was decreased by all OPFR. At similar concentrations, the FR currently in use decreased plasma membrane dopamine active transporter expression, while BDE-47 did not. Several findings suggest astrogliosis induced by the OPFR, but not BDE-47. At the 5 µM concentrations, the OPFR more than BDE-47 interfered with myelination. An increase of cytokine gene and receptor expressions suggests that exposure to OPFR may induce an inflammatory response. Pathway/category overrepresentation shows disruption in 1) transmission of action potentials, cell-cell signaling, synaptic transmission, receptor signaling, (2) immune response, inflammation, defense response, (3) cell cycle and (4) lipids metabolism and transportation. Taken together, this appears to be a case of regretful substitution with substances not less developmentally neurotoxic in a primary rat 3D model.

A guide towards safe, functional and renewable BPA alternatives by rational molecular design: structure–property and structure–toxicity relationships

Putting the pieces together: a guide for rational molecular design of safe, functional and renewable BPA alternatives.

Facile preparation of polycarbonates from bio-based eugenol and 2-methoxy-4-vinylphenol

Polymerization of α,ω-diene functionalized carbonate monomers prepared from bio-based eugenol and 2-methoxy-4-vinylphenol through thiol–ene click and ADMET polymerizations produced polycarbonates with moderate molecular weight satisfactory thermal properties.

Establishing structure-property-hazard relationships for multi-walled carbon nanotubes: the role of aggregation, surface charge, and oxidative stress on embryonic zebrafish mortality

Increasing use of carbon nanotubes (CNTs) in consumer and industrials goods increases their potential release, and subsequent risks to environmental and human health. Therefore, it is becoming ever more important that CNTs are designed to reduce or eliminate hazards and that hazard assessment methodologies are robust. Here, oxygen-functionalized multi-walled CNTs (O-MWCNTs), modified under varying redox conditions, were assessed for toxic potential using the zebrafish (Danio rerio) embryo model. Multiple physicochemical properties (e.g., MWCNT aggregate size, morphology, and rate; surface charge and oxygen concentration; and reactive oxygen species (ROS) generation) were characterized and related to zebrafish embryo mortality through the use of multivariate statistical methods. Of these properties, surface charge and aggregate morphology emerged as the greatest predictors of embryo mortality. Interestingly, ROS generation was not significantly correlated to observed mortality, contrary to prior predictions by nanotoxicology researchers. This suggests that the mechanism of MWCNT-induced mortality of embryonic zebrafish is physical, driven by electrostatic and shape effects, both of which are related to nanomaterial aggregation. This raises the importance of rigorously considering aggregation during aqueous-based nanotoxicology assays as nanomaterial aggregation can affect perceived nanomaterial toxicity. As such, future nanotoxicity studies relying on aqueous media must sufficiently consider nanomaterial aggregation.

Study on the Synthetic Characteristics of Biomass-Derived Isosorbide-Based Poly(arylene ether ketone)s for Sustainable Super Engineering Plastic

Demand for the development of novel polymers derived from biomass that can replace petroleum resources has been increasing. In this study, biomass-derived isosorbide was used as a monomer in the polymerization of poly(arylene ether ketone)s, and its synthetic characteristics were investigated. As a phase-transfer catalyst, crown ether has increased the weight-average molecular weight of polymers over 100 kg/mol by improving the reaction efficiency of isosorbide and minimizing the effect of moisture. By controlling the experimental parameters such as halogen monomer, polymerization solvent, time, and temperature, the optimal conditions were found to be fluorine-type monomer, dimethyl sulfoxide, 24 h, and 155 °C, respectively. Biomass contents from isosorbide-based polymers were determined by nuclear magnetic resonance and accelerator mass spectroscopy. The synthesized polymer resulted in a high molecular weight that enabled the preparation of transparent polymer films by the solution casting method despite its weak thermal degradation stability compared to aromatic polysulfone. The melt injection molding process was enabled by the addition of plasticizer. The tensile properties were comparable or superior to those of commercial petrochemical specimens of similar molecular weight. Interestingly, the prepared specimens exhibited a significantly lower coefficient of thermal expansion at high temperatures over 150 °C compared to polysulfone.

Sustainable and recyclable super engineering thermoplastic from biorenewable monomer

Environmental and health concerns force the search for sustainable super engineering plastics (SEPs) that utilise bio-derived cyclic monomers, e.g. isosorbide instead of restricted petrochemicals. However, previously reported bio-derived thermosets or thermoplastics rarely offer thermal/mechanical properties, scalability, or recycling that match those of petrochemical SEPs. Here we use a phase transfer catalyst to synthesise an isosorbide-based polymer with a high molecular weight >100 kg mol-1, which is reproducible at a 1-kg-scale production. It is transparent and solvent/melt-processible for recycling, with a glass transition temperature of 212 °C, a tensile strength of 78 MPa, and a thermal expansion coefficient of 23.8 ppm K-1. Such a performance combination has not been reported before for bio-based thermoplastics, petrochemical SEPs, or thermosets. Interestingly, quantum chemical simulations show the alicyclic bicyclic ring structure of isosorbide imposes stronger geometric restraint to polymer chain than the aromatic group of bisphenol-A.

Combining in Silico Tools with Multicriteria Analysis for Alternatives Assessment of Hazardous Chemicals: A Case Study of Decabromodiphenyl Ether Alternatives

Alternatives assessment is applied for minimizing the risk of unintentionally replacing a hazardous chemical with another hazardous chemical. Central challenges are the diversity of properties to consider and the lack of high-quality experimental data. To address this, a novel alternatives assessment procedure was developed based on in silico data and multicriteria decision analysis (MCDA) methods. As a case study, 16 alternatives to the flame retardant decabromodiphenyl ether were considered. The hazard properties included persistence (P), bioaccumulation potential (B), toxicities (T), and mobility in water (M). Databases were consulted and 2866 experimental data points were collected for the target chemicals; however, these were mostly replicate data points for some hazard criteria for a subset of alternatives. Therefore, in silico data and three MCDA strategies were tested including heat mapping, multiattribute utility theory (MAUT), and Elimination Et Choix Traduisant la REalité (ELECTRE III). The heat map clearly showed that none of the target chemicals are hazard-free, whereas MAUT and ELECTRE III agreed on ranking the "least worst" choices. This study identified several challenges and the complexity in the alternatives assessment processes motivating more case studies combining in silico and MCDA approaches.

Application of a Novel Coarse-Grained Soil Organic Matter Model in the Environment

Soil organic matter (SOM) is ubiquitous in the environment. Intensive efforts have been made to find effective ways to assess the interaction of SOM with contaminants since such interactions are one of the important criteria used to evaluate the migration, persistency and bioavailability of chemicals in the environment. This study aims to extend the application of coarse-grained (CG) dissipative particle dynamics (DPD) to the water/SOM system and predict contaminant mobility in the system. The CG model was based on the Vienna Soil-Organic-Matter Modeler, which can generate flexible condensed-phase models of SOM. A series of DPD simulations was performed to investigate the mobility of perfluorinated sulfonic acids (PFSAs) and hexachlorobutadiene (HCBD). The results indicated that the mobility of PFSAs decreased with increasing length in the carbon chain. In addition, HCBD and hexachlorobenzene (HCB) have similar diffusion coefficients, indicating analogous behavior in SOM. Moreover, water-containing SOM layers may reflect a more realistic situation. This work, coupling the CG method with DPD simulation, provides a new high-efficiency tool to assess the behavior of contaminants in the environment.

Advancements in Life Cycle Human Exposure and Toxicity Characterization

BACKGROUND

The Life Cycle Initiative, hosted at the United Nations Environment Programme, selected human toxicity impacts from exposure to chemical substances as an impact category that requires global guidance to overcome current assessment challenges. The initiative leadership established the Human Toxicity Task Force to develop guidance on assessing human exposure and toxicity impacts. Based on input gathered at three workshops addressing the main current scientific challenges and questions, the task force built a roadmap for advancing human toxicity characterization, primarily for use in life cycle impact assessment (LCIA).

OBJECTIVES

The present paper aims at reporting on the outcomes of the task force workshops along with interpretation of how these outcomes will impact the practice and reliability of toxicity characterization. The task force thereby focuses on two major issues that emerged from the workshops, namely considering near-field exposures and improving dose–response modeling.

DISCUSSION

The task force recommended approaches to improve the assessment of human exposure, including capturing missing exposure settings and human receptor pathways by coupling additional fate and exposure processes in consumer and occupational environments (near field) with existing processes in outdoor environments (far field). To quantify overall aggregate exposure, the task force suggested that environments be coupled using a consistent set of quantified chemical mass fractions transferred among environmental compartments. With respect to dose–response, the task force was concerned about the way LCIA currently characterizes human toxicity effects, and discussed several potential solutions. A specific concern is the use of a (linear) dose–response extrapolation to zero. Another concern addresses the challenge of identifying a metric for human toxicity impacts that is aligned with the spatiotemporal resolution of present LCIA methodology, yet is adequate to indicate health impact potential.

CONCLUSIONS

Further research efforts are required based on our proposed set of recommendations for improving the characterization of human exposure and toxicity impacts in LCIA and other comparative assessment frameworks. https://doi.org/10.1289/EHP3871.

Weighted Gene Correlation Network Analysis (WGCNA) Reveals Novel Transcription Factors Associated With Bisphenol A Dose-Response

Despite Bisphenol-A (BPA) being subject to extensive study, a thorough understanding of molecular mechanism remains elusive. Here we show that using weighted gene correlation network analysis (WGCNA), which takes advantage of a graph theoretical approach to understanding correlations amongst genes and grouping genes into modules that typically have co-ordinated biological functions and regulatory mechanisms, that despite some commonality in altered genes, there is minimal overlap between BPA and estrogen in terms of network topology. We confirmed previous findings that ZNF217 and TFAP2C are involved in the estrogen pathway, and are implicated in BPA as well, although for BPA they appear to be active in the absence of canonical estrogen-receptor driven gene expression. Furthermore, our study suggested that PADI4 and RACK7/ZMYNDB8 may be involved in the overlap in gene expression between estradiol and BPA. Lastly, we demonstrated that even at low doses there are unique transcription factors that appear to be driving the biology of BPA, such as SREBF1. Overall, our data is consistent with other reports that BPA leads to subtle gene changes rather than profound aberrations of a conserved estrogen signaling (or other) pathways.

Phthalate and Organophosphate Plasticizers in Nail Polish: Evaluation of Labels and Ingredients

In the 2000s, nail polish manufacturers started promoting "3-Free" products, phasing out three widely publicized toxic chemicals: toluene, formaldehyde, and dibutyl phthalate (DnBP). However, DnBP was sometimes replaced by another endocrine-disrupting plasticizer, triphenyl phosphate (TPHP). Many new " n-Free" labels have since appeared, without any standardization on which n chemicals are excluded. This study aimed to compare measured plasticizer content against nail polish labels. First, we summarized definitions of labels. Then, we measured 12 phthalate and 10 organophosphate plasticizers in 40 nail polishes from 12 brands selected for popularity and label variety. We found labels ranging from 3- to 13-Free; 10-Free was the most inconsistently defined (six definitions). Our samples contained TPHP and bis(2-ethylhexyl) phthalate (DEHP) at up to 7940 and 331 μg/g, respectively. The 5- to 13-Free samples had lower TPHP levels than unlabeled or 3-Free samples (median <0.002 vs 3730 μg/g, p < 0.001). The samples that did not contain TPHP had higher DEHP levels (median 68.5 vs 1.51 μg/g, p < 0.05). We measured plasticizers above 100 μg/g in five brands that did not disclose them and in two that excluded them in labels. This study highlights inconsistencies in nail polish labels and identifies TPHP and DEHP as ingredient substitutes for DnBP.

Toward sustainable environmental quality: Priority research questions for Europe

The United Nations' Sustainable Development Goals have been established to end poverty, protect the planet, and ensure prosperity for all. Delivery of the Sustainable Development Goals will require a healthy and productive environment. An understanding of the impacts of chemicals which can negatively impact environmental health is therefore essential to the delivery of the Sustainable Development Goals. However, current research on and regulation of chemicals in the environment tend to take a simplistic view and do not account for the complexity of the real world, which inhibits the way we manage chemicals. There is therefore an urgent need for a step change in the way we study and communicate the impacts and control of chemicals in the natural environment. To do this requires the major research questions to be identified so that resources are focused on questions that really matter. We present the findings of a horizon-scanning exercise to identify research priorities of the European environmental science community around chemicals in the environment. Using the key questions approach, we identified 22 questions of priority. These questions covered overarching questions about which chemicals we should be most concerned about and where, impacts of global megatrends, protection goals, and sustainability of chemicals; the development and parameterization of assessment and management frameworks; and mechanisms to maximize the impact of the research. The research questions identified provide a first-step in the path forward for the research, regulatory, and business communities to better assess and manage chemicals in the natural environment. Environ Toxicol Chem 2018;37:2281-2295. © 2018 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals, Inc. on behalf of SETAC.

A framework for sustainable nanomaterial selection and design based on performance, hazard, and economic considerations

Engineered nanomaterials (ENMs) and ENM-enabled products have emerged as potentially high-performance replacements to conventional materials and chemicals. As such, there is an urgent need to incorporate environmental and human health objectives into ENM selection and design processes. Here, an adapted framework based on the Ashby material selection strategy is presented as an enhanced selection and design process, which includes functional performance as well as environmental and human health considerations. The utility of this framework is demonstrated through two case studies, the design and selection of antimicrobial substances and conductive polymers, including ENMs, ENM-enabled products and their alternatives. Further, these case studies consider both the comparative efficacy and impacts at two scales: (i) a broad scale, where chemical/material classes are readily compared for primary decision-making, and (ii) within a chemical/material class, where physicochemical properties are manipulated to tailor the desired performance and environmental impact profile. Development and implementation of this framework can inform decision-making for the implementation of ENMs to facilitate promising applications and prevent unintended consequences.

Toward sustainable environmental quality: Identifying priority research questions for Latin America

The Global Horizon Scanning Project (GHSP) is an innovative initiative that aims to identify important global environmental quality research needs. Here we report 20 key research questions from Latin America (LA). Members of the Society of Environmental Toxicology and Chemistry (SETAC) LA and other scientists from LA were asked to submit research questions that would represent priority needs to address in the region. One hundred questions were received, then partitioned among categories, examined, and some rearranged during a workshop in Buenos Aires, Argentina. Twenty priority research questions were subsequently identified. These research questions included developing, improving, and harmonizing across LA countries methods for 1) identifying contaminants and degradation products in complex matrices (including biota); 2) advancing prediction of contaminant risks and effects in ecosystems, addressing lab-to-field extrapolation challenges, and understanding complexities of multiple stressors (including chemicals and climate change); and 3) improving management and regulatory tools toward achieving sustainable development. Whereas environmental contaminants frequently identified in these key questions were pesticides, pharmaceuticals, endocrine disruptors or modulators, plastics, and nanomaterials, commonly identified environmental challenges were related to agriculture, urban effluents, solid wastes, pulp and paper mills, and natural extraction activities. Several interesting research topics included assessing and preventing pollution impacts on conservation protected areas, integrating environment and health assessments, and developing strategies for identification, substitution, and design of less hazardous chemicals (e.g., green chemistry). Finally, a recurrent research need included developing an understanding of differential sensitivity of regional species and ecosystems to environmental contaminants and other stressors. Addressing these critical questions will support development of long-term strategic research efforts to advance more sustainable environmental quality and protect public health and the environment in LA. Integr Environ Assess Manag 2018;14:344-357. © 2018 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).