A tough biodegradable elastomer

Synthesis and characterization of ionic charged water soluble arginine-based poly(ester amide)

A family of water soluble and positively charged L-arginine based poly(ester amide)s (Arg-PEAs) was synthesized and characterized. These biodegradable polymers consist of three nontoxic building blocks: L-arginine, diols, and dicarboxylic acids. The Arg-PEAs were prepared by solution polycondensation reaction of tetra-p-toluenesulfonic acids salts of bis-(L-arginine) α, ω-alkylene diesters and di-p-nitrophenyl esters of dicarboxylic acids. Optimal conditions of the monomers and polymers synthesis were investigated, and the monomers and Arg-PEAs were chemically characterized. Arg-PEAs were found to have good solubility in water and many other polar solvents. Structure-function relationship of the Arg-PEAs revealed that changing the number of methylene groups in the diol or/and diacid segment could finely tune the hydrophobic and cationic properties of the Arg-PEAs. MTT assay showed that all the prepared Arg-PEAs were non-toxic to the cell lines even at very large doses. Arg-PEAs with double bond functionality could be photo-crosslinked with polyethylene glycol diacrylate to form cationic hybrid hydrogels.

Poly(Glycerol sebacate)/gelatin core/shell fibrous structure for regeneration of myocardial infarction

Heart failure remains the leading cause of death in many industrialized nations owing to the inability of the myocardial tissue to regenerate. The main objective of this work was to develop a cardiac patch that is biocompatible and matches the mechanical properties of the heart muscle for myocardial infarction. The present study was to fabricate poly (glycerol sebacate)/gelatin (PGS/gelatin) core/shell fibers and gelatin fibers alone by electrospinning for cardiac tissue engineering. PGS/gelatin core/shell fibers, PGS used as a core polymer to impart the mechanical properties and gelatin as a shell material to achieve favorable cell adhesion and proliferation. These core/shell fibers were characterized by scanning electron microscopy, contact angle, Fourier transform infrared spectroscopy, and tensile testing. The cell-scaffold interactions were analyzed by cell proliferation, confocal analysis for the expression of marker proteins like actinin, troponin-T, and platelet endothelial cell adhesion molecule, and scanning electron microscopy to analyze cell morphology. Dual immunofluorescent staining was performed to further confirm the cardiogenic differentiation of mesenchymal stem cells by employing mesenchymal stem cell-specific marker protein CD 105 and cardiac-specific marker protein actinin. The results observed that PGS/gelatin core/shell fibers have good potential biocompatibility and mechanical properties for fabricating nanofibrous cardiac patch and would be a prognosticating device for the restoration of myocardium.

PCL-based Shape Memory Polymers with Variable PDMS Soft Segment Lengths

Thermoresponsive shape memory polymers (SMPs) are stimuli-responsive materials that return to their permanent shape from a temporary shape in response to heating. The design of new SMPs which obtain a broader range of properties including mechanical behavior is critical to realize their potential in biomedical as well as industrial and aerospace applications. To tailor the properties of SMPs, "AB networks" comprised of two distinct polymer components have been investigated but are overwhelmingly limited to those in which both components are organic. In this present work, we prepared inorganic-organic SMPs comprised of inorganic polydimethyl-siloxane (PDMS) segments of varying lengths and organic poly(ε-caprolactone) (PCL) segments. PDMS has a particularly low T(g) (-125 °C) which makes it a particularly effective soft segment to tailor the mechanical properties of PCL-based SMPs. The SMPs were prepared via the rapid photocure of solutions of diacrylated PCL(40)-block-PDMS(m)-block-PCL(40) macromers (m = 20, 37, 66 and 130). The resulting inorganic-organic SMP networks exhibited excellent shape fixity and recovery. By changing the PDMS segment length, the thermal, mechanical, and surface properties were systematically altered.

Substantial expression of mature elastin in arterial constructs

Mature elastin synthesis is a key challenge in arterial tissue engineering. Most engineered vessels lack elastic fibers in the medial layer and those present are poorly organized. The objective of this study is to increase mature elastin synthesis in small-diameter arterial constructs. Adult primary baboon smooth muscle cells (SMCs) were seeded in the lumen of porous tubular scaffolds fabricated from a biodegradable elastomer, poly(glycerol sebacate) (PGS) and cultured in a pulsatile flow bioreactor for 3 wk. We tested the effect of pore sizes on construct properties by histological, biochemical, and mechanical evaluations. Histological analysis revealed circumferentially organized extracellular matrix proteins including elastin and the presence of multilayered SMCs expressing calponin and α-smooth muscle actin. Biochemical analysis demonstrated that the constructs contained mature elastin equivalent to 19% of the native arteries. Mechanical tests indicated that the constructs could withstand up to 200 mmHg burst pressure and exhibited compliance comparable to native arteries. These results show that nontransfected cells in PGS scaffolds in unsupplemented medium produced a substantial amount of mature elastin within 3 wk and the elastic fibers had similar orientation as those in native arteries. The 25-32 μm pore size supported cell organization and elastin synthesis more than larger pore sizes. To our knowledge, there was no prior report of the synthesis of mature and organized elastin in arterial constructs without exogenous factors or viral transduction.

Scaffold stiffness affects the contractile function of three-dimensional engineered cardiac constructs

We investigated the effects of the initial stiffness of a three-dimensional elastomer scaffold--highly porous poly(glycerol sebacate)--on functional assembly of cardiomyocytes cultured with perfusion for 8 days. The polymer elasticity varied with the extent of polymer cross-links, resulting in three different stiffness groups, with compressive modulus of 2.35 ± 0.03 (low), 5.28 ± 0.36 (medium), and 5.99 ± 0.40 (high) kPa. Laminin coating improved the efficiency of cell seeding (from 59 ± 15 to 90 ± 21%), resulting in markedly increased final cell density, construct contractility, and matrix deposition, likely because of enhanced cell interaction and spreading on scaffold surfaces. Compact tissue was formed in the low and medium stiffness groups, but not in the high stiffness group. In particular, the low stiffness group exhibited the greatest contraction amplitude in response to electric field pacing, and had the highest compressive modulus at the end of culture. A mathematical model was developed to establish a correlation between the contractile amplitude and the cell distribution within the scaffold. Taken together, our findings suggest that the contractile function of engineered cardiac constructs positively correlates with low compressive stiffness of the scaffold.

Biodegradable elastomers for tissue engineering and cell-biomaterial interactions

Synthetic biomaterials serve as a cornerstone in the development of clinically focused regenerative medicine therapies that aim to reduce suffering and prolong life. Recent improvements in biodegradable elastomeric materials utilize natural extracellular matrix proteins as inspiration to yield a new class of materials with superior degradation kinetics, desirable biocompatibility profiles, and mechanical properties that closely match those of soft tissues. This review describes several classes of synthetic biodegradable elastomers and associated fabrication techniques that are relevant to scaffold development. The application of these materials to select tissue engineering models is also discussed.

Functional aliphatic polyesters for biomedical and pharmaceutical applications

Functional aliphatic polyesters are biodegradable polymers with many possibilities to tune physico-chemical characteristics such as hydrophilicity and degradation rate as compared to traditional polyesters (e.g. PLLA, PLGA and PCL), making the materials suitable for drug delivery or as scaffolds for tissue engineering. Lately, a large number of polyesters have been synthesized by homopolymerization of functionalized monomers or co-polymerization with other monomers mainly via ring-opening polymerization (ROP) of cyclic esters. This review presents the recent trends in the synthesis of these materials and their application for protein delivery and tissue engineering.

Cell-adhesive and mechanically tunable glucose-based biodegradable hydrogels

The development of materials with biomimetic mechanical and biological properties is of great interest for regenerative medicine applications. In particular, hydrogels are a promising class of biomaterials due to their high water content, which mimics that of natural tissues. We have synthesized a hydrophilic biodegradable polymer, designated poly(glucose malate)methacrylate (PGMma), which is composed of glucose and malic acid, commonly found in the human metabolic system. This polymer is made photocrosslinkable by the incorporation of methacrylate groups. The resulting properties of the hydrogels can be tuned by altering the reacting ratio of the starting materials, the degree of methacrylation, and the polymer concentration of the resultant hydrogel. Hydrogels exhibited compressive moduli ranging from 1.8 ± 0.4 kPa to 172.7 ± 36 kPa with compressive strain at failure from 37.5 ± 0.9% to 61.2 ± 1.1%, and hydration by mass ranging from 18.7 ± 0.5% to 114.1 ± 1.3%. PGMma hydrogels also showed a broad range of degradation rates and were cell-adhesive, enabling the spreading of adherent cells. Overall, this work introduces a class of cell-adhesive, mechanically tunable and biodegradable glucose-based hydrogels that may be useful for various tissue engineering and cell culture applications.

Development of Photocrosslinkable Urethane-Doped Polyester Elastomers for Soft Tissue Engineering

Finding an ideal biomaterial with the proper mechanical properties and biocompatibility has been of intense focus in the field of soft tissue engineering. This paper reports on the synthesis and characterization of a novel crosslinked urethane-doped polyester elastomer (CUPOMC), which was synthesized by reacting a previously developed photocrosslinkable poly (octamethylene maleate citrate) (POMC) prepolymers (pre-POMC) with 1,6-hexamethylene diisocyanate (HDI) followed by thermo- or photo-crosslinking polymerization. The mechanical properties of the CUPOMCs can be tuned by controlling the molar ratios of pre-POMC monomers, and the ratio between the prepolymer and HDI. CUPOMCs can be crosslinked into a 3D network through polycondensation or free radical polymerization reactions. The tensile strength and elongation at break of CUPOMC synthesized under the known conditions range from 0.73±0.12MPa to 10.91±0.64MPa and from 72.91±9.09% to 300.41±21.99% respectively. Preliminary biocompatibility tests demonstrated that CUPOMCs support cell adhesion and proliferation. Unlike the pre-polymers of other crosslinked elastomers, CUPOMC pre-polymers possess great processability demonstrated by scaffold fabrication via a thermally induced phase separation method. The dual crosslinking methods for CUPOMC pre-polymers should enhance the versatile processability of the CUPOMC used in various conditions. Development of CUPOMC should expand the choices of available biodegradable elastomers for various biomedical applications such as soft tissue engineering.

The influence of fibrous elastomer structure and porosity on matrix organization

Fibrous scaffolds are finding wide use in the field of tissue engineering, as they can be designed to mimic many native tissue properties and structures (e.g., cardiac tissue, meniscus). The influence of fiber alignment and scaffold architecture on cellular interactions and matrix organization was the focus of this study. Three scaffolds were fabricated from the photocrosslinkable elastomer poly(glycerol sebacate) (PGS), with changes in fiber alignment (non-aligned (NA) versus aligned (AL)) and the introduction of a PEO sacrificial polymer population to the AL scaffold (composite (CO)). PEO removal led to an increase in scaffold porosity and maintenance of scaffold anisotropy, as evident through visualization, mechanical testing, and mass loss studies. Hydrated scaffolds possessed moduli that ranged between ∼3-240 kPa, failing within the range of properties (<300 kPa) appropriate for soft tissue engineering. CO scaffolds were completely degraded as early as 16 days, whereas NA and AL scaffolds had ∼90% mass loss after 21 days when monitored in vitro. Neonatal cardiomyocytes, used as a representative cell type, that were seeded onto the scaffolds maintained their viability and aligned along the surface of the AL and CO fibers. When implanted subcutaneously in rats, a model that is commonly used to investigate in vivo tissue responses to biomaterials, CO scaffolds were completely integrated at 2 weeks, whereas ∼13% and ∼16% of the NA and AL scaffolds, respectively remained acellular. However, all scaffolds were completely populated with cells at 4 weeks post-implantation. Polarized light microscopy was used to evaluate the collagen elaboration and orientation within the scaffold. An increase in the amount of collagen was observed for CO scaffolds and enhanced alignment of the nascent collagen was observed for AL and CO scaffolds compared to NA scaffolds. Thus, these results indicate that the scaffold architecture and porosity are important considerations in controlling tissue formation.

In vivo biodegradation and biocompatibility of PEG/sebacic acid-based hydrogels using a cage implant system

Comprehensive in vivo biodegradability and biocompatibility of unmodified and Arg-Gly-Asp (RGD) peptide-modified PEG/sebacic acid-based hydrogels were evaluated and compared to the control material poly(lactide-co-glycolide) (PLGA) using a cage implantation system, as well as direct subcutaneous implantation for up to 12 weeks. The total weight loss after 12 weeks of implantation for unmodified PEGSDA and RGD-modified PEGSDA in the cage was approximately 42% and 52%, respectively, with no statistical difference (p > 0.05). The exudate analysis showed that PEGSDA hydrogels induced minimal inflammatory response up to 21 days following implantation, similar to the controls (empty cage and the cage containing PLGA discs). Histology analysis from direct subcutaneous implantation of the hydrogels and PLGA scaffold showed statistically similar resolution of the acute and chronic inflammatory responses with development of the fibrous capsule between the PEGSDA hydrogels and the control (PLGA). The cage system, as well as the histology analysis, demonstrated that the degradation products of both hydrogels, with or without RGD peptide modification, are biocompatible without statistically significant differences in the inflammatory responses, as compared to PLGA.

Finite element analysis of an accordion-like honeycomb scaffold for cardiac tissue engineering

Optimizing the function of tissue engineered cardiac muscle is becoming more feasible with the development of microfabricated scaffolds amenable to mathematical modeling. In the current study, the elastic behavior of a recently developed poly(glycerol sebacate) (PGS) accordion-like honeycomb (ALH) scaffold [Engelmayr et al., 2008. Nature Materials 7 (12), 1003-1010] was analyzed. Specifically, 2D finite element (FE) models of the ALH unit cell (periodic boundary conditions) and tessellations (kinematic uniform boundary conditions) were utilized to determine a representative volume element (RVE) and to retrospectively predict the elastic effective stiffnesses. An RVE of 90 ALH unit cells (≃3.18×4.03mm) was found, indicating that previous experimental uni-axial test samples were mechanically representative. For ALH scaffolds microfabricated from PGS cured 7.5h at 160°C, FE predicted effective stiffnesses in the two orthogonal material directions (0.081±0.012 and 0.033±0.005MPa) matched published experimental data (0.083±0.004 and 0.031±0.002MPa) within 2.4% and 6.4%. Of potential use as a design criterion, model predicted global strain amplifications were lower in ALH (0.54 and 0.34) versus rectangular honeycomb (1.19 and 0.74) scaffolds, appearing to be inversely correlated with previously measured strains-to-failure. Important in matching the anisotropic mechanical properties of native cardiac muscle, FE predicted ALH scaffolds with 50μm wide PGS struts to be maximally anisotropic. The FE model will thus be useful in designing future variants of the ALH pore geometry that simultaneously provide proper cardiac anisotropy and reduced stiffness to enhance heart cell-mediated contractility.

Combined technologies for microfabricating elastomeric cardiac tissue engineering scaffolds

Polymer scaffolds that direct elongation and orientation of cultured cells can enable tissue engineered muscle to act as a mechanically functional unit. We combined micromolding and microablation technologies to create muscle tissue engineering scaffolds from the biodegradable elastomer poly(glycerol sebacate). These scaffolds exhibited well defined surface patterns and pores and robust elastomeric tensile mechanical properties. Cultured C2C12 muscle cells penetrated the pores to form spatially controlled engineered tissues. Scanning electron and confocal microscopy revealed muscle cell orientation in a preferential direction, parallel to micromolded gratings and long axes of microablated anisotropic pores, with significant individual and interactive effects of gratings and pore design.

Crosslinked urethane doped polyester biphasic scaffolds: Potential for in vivo vascular tissue engineering

In vivo tissue engineering uses the body as a bioreactor for tissue regeneration, thus placing stringent requirements on tissue scaffolds, which should be mechanically robust for immediate implantation without a long in vitro cell culture time. In addition to mechanical strength, vascular grafts fabricated for in vivo tissue engineering approach must have matching mechanical properties to the target tissues to avoid compliance mismatch, which is one of the reasons for graft failure. We recently synthesized a new generation of strong and elastic biodegradable crosslinked urethane-doped polyesters (CUPE) to address the challenge of developing soft, elastic yet strong biodegradable polymers. This study evaluated the tensile strength, burst pressure, and suture retention of CUPE biphasic scaffolds to determine if the scaffolds met the requirements for immediate implantation in an in vivo tissue engineering approach. In addition, we also examined the hemocompatibility and inflammatory potential of CUPE to demonstrate its potential in serving as a blood-contacting vascular graft material. Tensile strength of CUPE biphasic scaffolds (5.02 ± 0.70 MPa) was greater than native vessels (1.43 ± 0.60 MPa). CUPE scaffolds exhibited tunable burst pressure ranging from 1500 mmHg to 2600 mmHg, and adequate suture retention values (2.45 ± 0.23 N). CUPE showed comparable leukocyte activation and whole blood clotting kinetics to poly(L-lactic acid) PLLA. However, CUPE incited a lesser release of inflammatory cytokines and was found to be non hemolytic. Combined with the mechanical properties and previously demonstrated anti-thrombogenic nature, CUPE may serve as a viable graft material for in vivo blood vessel tissue engineering.

Biodegradable xylitol-based elastomers: in vivo behavior and biocompatibility

Biodegradable elastomers based on polycondensation reactions of xylitol with sebacic acid, referred to as poly(xylitol sebacate) (PXS) elastomers have recently been developed. We describe the in vivo behavior of PXS elastomers. Four PXS elastomers were synthesized, characterized, and compared with poly(L-lactic-co-glycolic acid) (PLGA). PXS elastomers displayed a high level of structural integrity and form stability during degradation. The in vivo half-life ranged from approximately 3 to 52 weeks. PXS elastomers exhibited increased biocompatibility compared with PLGA implants.

Zero-order controlled release of ciprofloxacin-HCl from a reservoir-based, bioresorbable and elastomeric device

A reservoir-based device constructed of a completely biodegradable elastomer can enable several new implantation and insertion options for localized drug therapy, particularly in the case of urological therapies. We performed an in vitro performance evaluation of an implantable, bio-resorbable device that supplies short-term controlled release of ciprofloxacin-HCl (CIP). The proposed device functions through a combination of osmosis and diffusion mechanisms to release CIP for short-term therapies of a few weeks duration. Poly(glycerol-co-sebacic acid) (PGS) was cast in a tubular geometry with solid drug powder packed into its core and a micro-machined release orifice drilled through its wall. Drug release experiments were performed to determine the effective release rate from a single orifice and the range of orifice sizes in which controlled zero-order release was the main form of drug expulsion from the device. It is demonstrated that PGS is sufficiently permeable to water to allow the design of an elementary osmotic pump for drug delivery. Indeed, PGS's water permeability is several orders of magnitude larger than commonly used cellulose acetate for elementary osmotic pumps.

Tailoring the mechanical properties of 3D-designed poly(glycerol sebacate) scaffolds for cartilage applications

Matching tissue engineering scaffold modulus to that of native tissue is highly desirable. Effective scaffold modulus can be altered through changes in base material modulus and/or scaffold pore architecture. Because the latter may be restricted by tissue in-growth requirements, it is advantageous to be able to alter the base material modulus of a chosen scaffold material. Here, we show that the bulk modulus of poly(glycerol sebacate) (PGS) can be changed by varying molar ratios during prepolymer synthesis and by varying curing time. We go on to show that PGS can be used to create 3D designed scaffolds via solid freeform fabrication methods with modulus values that fall within the ranges of native articular cartilage equilibrium modulus. Furthermore, using base material modulus inputs, homogenization finite element analysis can effectively predict the tangent modulus of PGS scaffold designs, which provides a significant advantage for designing new cartilage regeneration scaffolds. Lastly, we demonstrate that this relatively new biomedical material supports cartilaginous matrix production by chondrocytes in vitro. (c) 2010 Wiley Periodicals, Inc. J Biomed Mater Res, 2010.

A synthetic elastomer based on acrylated polypropylene glycol triol with tunable modulus for tissue engineering applications

As strategies for manipulating cellular behaviour in vitro and in vivo become more sophisticated, synthetic biomaterial substrates capable of reproducing critical biochemical and biophysical properties (or cues) of tissue micro-environments will be required. Cytoskeletal tension has been shown to be highly deterministic of cell fate decisions, yet few synthetic biomaterials are capable of modulating cytoskeletal tension of adhered cells through variations in stiffness, at least in the ranges applicable to tissue properties (e.g., 1-100 kPa), whilst also possessing other required properties, such as biodegradability, biocompatibility and processability. In this paper we describe a non-cytotoxic polymer system based on acrylated polypropylene glycol triol (aPPGT). This new elastomer system has tunable elastic moduli, is degradable, can be easily surface modified and can be manufactured into porous three dimensional scaffolds or micropatterned substrates. We demonstrate that the PPGT substrates can modulate hMSC morphology, growth, and differentiation, and that they can produce similar outcomes as observed for a non-degradable polyacrylamide substrate, confirming their utility as a degradable elastomer for tissue engineering and other biomedical applications.

Designing bioactive delivery systems for tissue regeneration

The direct infusion of macromolecules into defect sites generally does not impart adequate physiological responses. Without the protection of delivery systems, inductive molecules may likely redistribute away from their desired locale and are vulnerable to degradation. In order to achieve efficacy, large doses supplied at interval time periods are necessary, often at great expense and ensuing detrimental side effects. The selection of a delivery system plays an important role in the rate of re-growth and functionality of regenerating tissue: not only do the release kinetics of inductive molecules and their consequent bioactivities need to be considered, but also how the delivery system interacts and integrates with its surrounding host environment. In the current review, we describe the means of release of macromolecules from hydrogels, polymeric microspheres, and porous scaffolds along with the selection and utilization of bioactive delivery systems in a variety of tissue-engineering strategies.

Retinal transplantation using surface modified poly(glycerol-co-sebacic acid) membranes

In retinal transplantation experiments it is hypothesized that remaining diseased photoreceptor cells in the host retina and inner retinal cells in transplants physically obstruct the development of graft-host neuronal contacts which are required for vision. Recently, we developed methods for the isolation of donor photoreceptor layers in vitro, and the selective removal of host photoreceptors in vivo using biodegradable elastomeric membranes composed of poly(glycerol-co-sebacic acid) (PGS). We also coated PGS membranes with electrospun nanofibers, composed of laminin and poly(epsilon-caprolactone) (PCL), to promote attachment of embryonic retinal explants, allowing the resulting composites to be handled surgically as a single entity. Here, we report subretinal transplantation of these composites into adult porcine eyes. In hematoxylin and eosin stained sections of composite explants after 5-7 days in vitro, excellent fusion of retinas and biomaterial membranes was noted, with the immature retinal components showing laminated as well as folded and rosetted areas. The composite grafts could be transplanted in all cases and, 3 months after surgery, eyes displayed clear media, attached retinas and the grafts located subretinally. Histological examination revealed that the biomaterial membrane had degraded without any signs of inflammation. Transplanted retinas displayed areas of rosettes as well as normal lamination. In most cases inner retinal layers were present in the grafts. Laminated areas displayed well-developed photoreceptors adjacent to an intact host retinal pigment epithelium and degeneration of the host outer nuclear layer (ONL) was often observed together with occasional fusion of graft and host inner layers.

Perfusion seeding of channeled elastomeric scaffolds with myocytes and endothelial cells for cardiac tissue engineering

The requirements for engineering clinically sized cardiac constructs include medium perfusion (to maintain cell viability throughout the construct volume) and the protection of cardiac myocytes from hydrodynamic shear. To reconcile these conflicting requirements, we proposed the use of porous elastomeric scaffolds with an array of channels providing conduits for medium perfusion, and sized to provide efficient transport of oxygen to the cells, by a combination of convective flow and molecular diffusion over short distances between the channels. In this study, we investigate the conditions for perfusion seeding of channeled constructs with myocytes and endothelial cells without the gel carrier we previously used to lock the cells within the scaffold pores. We first established the flow parameters for perfusion seeding of porous elastomer scaffolds using the C2C12 myoblast line, and determined that a linear perfusion velocity of 1.0 mm/s resulted in seeding efficiency of 87% +/- 26% within 2 hours. When applied to seeding of channeled scaffolds with neonatal rat cardiac myocytes, these conditions also resulted in high efficiency (77.2% +/- 23.7%) of cell seeding. Uniform spatial cell distributions were obtained when scaffolds were stacked on top of one another in perfusion cartridges, effectively closing off the channels during perfusion seeding. Perfusion seeding of single scaffolds resulted in preferential cell attachment at the channel surfaces, and was employed for seeding scaffolds with rat aortic endothelial cells. We thus propose that these techniques can be utilized to engineer thick and compact cardiac constructs with parallel channels lined with endothelial cells.

Functional groups affect physical and biological properties of dextran-based hydrogels

Modification of dextran backbone allows the development of a hydrogel with specific characteristics. To enhance their functionality for tissue-engineered scaffolds, a series of dextran-based macromers was synthesized by incorporating various functional groups, including allyl isocyanate (Dex-AI), ethylamine (Dex-AE), chloroacetic acid (Dex-AC), or maleic-anhydride (Dex-AM) into dextrans. The dextran-based biodegradable hybrid hydrogels are developed by integrating polyethylene glycol diacrylate (PEGDA). To explore the effect of different derivatives on hydrogel properties, three different ratios of Dex/PEGDA are examined: low (20/80), medium (40/60), and high (60/40). Differences in physical and biological properties of the hydrogels are found, including swelling, degradation rate, mechanics, crosslinking density, biocompatibility (in vitro and in vivo), and vascular endothelial growth factor release. The results also indicate that the incorporation of amine groups into dextran gives rise to hydrogels with better biocompatible and release properties. We, therefore, conclude that the incorporation of different functional groups affects the fundamental properties of a dextran-based hydrogel network, and that amine groups are preferred to generate hydrogels for biomedical use.

Poly(glycerol sebacate)-engineered plugs to repair chronic tympanic membrane perforations in a chinchilla model

Objective: To evaluate the degree of neovascularization and efficacy of repair of chronic tympanic membrane perforations in a chinchilla model using poly(glycerol sebacate) (PGS), a novel bioengineered scaffold material.

Study Design: A feasibility study in which chinchilla ears with chronic perforations were randomly assigned to repair with PGS plugs or Gelfilm overlay myringoplasty.

Setting: Interventions were performed in the animal care facility of a tertiary care academic institution.

Subjects and Methods: Sixteen adult female chinchillas. Perforations were established under microscopic visualization with thermal cautery. The animals were examined six weeks later, and those ears with stable perforations were randomly assigned to repair with PGS or Gelfilm. All ears were evaluated six weeks after repair, and resected membranes underwent histological evaluation.

Results: Chronic perforations were established in 22 of 32 (69%) chinchilla tympanic membranes. Nineteen tympanic membranes were included in the study group (3 ears were excluded secondary to death from anesthesia during the repair); 11 were implanted with PGS, and eight underwent Gelfilm myringoplasty. Of the 11 tympanic membranes implanted with PGS, 10 were healed at six weeks, while six of the eight tympanic membranes repaired with Gelfilm had healed at six weeks. Imaging of the medial mucosal and lateral epithelial surfaces of the tympanic membranes revealed PGS plug incorporation with neovascularization. Histology demonstrated a confluent cell layer on both sides of the graft.

Conclusions: PGS plugs are easily placed and allow for perforation closure and graft neovascularization in a chinchilla model.

Synthesis, characterization and cytocompatibility of a poly(diol-tricarballylate) visible light photo-cross-linked biodegradable elastomer

The synthesis, characterization and in vitro cytocompatibility of a new family of photo-cross-linked amorphous poly(diol-tricarballylate) (PDT) biodegradable elastomeric polyesters are reported. The synthesis was based on the polycondensation reaction between tricarballylic acid and alkylene diols, followed by acrylation. The prepared and acrylated poly(diol-tricarballylate) (APDT) was characterized by means of FT-IR, (1)H-NMR, GPC and DSC. Liquid-to-solid photo-curing was carried out by exposing the APDT to visible light in the presence of camphorquinone as a photoinitiator. The thermal properties, mechanical characteristics, sol content, long-term in vitro degradation and cytocompatibility of the prepared PDT elastomers were also reported. The mechanical and degradation properties of this new photocurable elastomer can be precisely controlled by varying the density of acrylate moieties in the matrix of the polymer, and through changes in the pre-polymer chain length. The use of visible light cross-linking, possibility of solventless drug loading, controllable mechanical properties and cytocompatibility of these new elastomers make them excellent candidates for use in controlled implantable drug-delivery systems of protein drugs and other biomedical applications.

Citric-acid-derived photo-cross-linked biodegradable elastomers

Citric-acid-derived thermally cross-linked biodegradable elastomers (CABEs) have recently received significant attention in various biomedical applications, including tissue-engineering orthopedic devices, bioimaging and implant coatings. However, citric-acid-derived photo-cross-linked biodegradable elastomers are rarely reported. Herein, we report a novel photo-cross-linked biodegradable elastomer, referred to as poly(octamethylene maleate citrate) (POMC), which preserves pendant hydroxyl and carboxylic functionalities after cross-linking for the potential conjugation of biologically active molecules. Pre-POMC is a low-molecular-mass pre-polymer with an average molecular mass between 701 and 1291 Da. POMC networks are soft and elastic with an initial modulus of 0.07 to 1.3 MPa and an elongation-at-break between 38 and 382%. FT-IR-ATR results confirmed the successful surface immobilization of type-I collagen onto POMC films, which enhanced in vitro cellular attachment and proliferation. Photo-polymerized POMC films implanted subcutaneously into Sprague-Dawley rats demonstrated minimal in vivo inflammatory responses. The development of POMC enriches the family of citric-acid-derived biodegradable elastomers and expands the available biodegradable polymers for versatile needs in biomedical applications.

A comparison of the influence of material on in vitro cartilage tissue engineering with PCL, PGS, and POC 3D scaffold architecture seeded with chondrocytes

The goal of this study was to determine material effects on cartilage regeneration for scaffolds with the same controlled architecture. The 3D polycaprolactone (PCL), poly (glycerol sebacate) (PGS), and poly (1,8 octanediol-co-citrate) (POC) scaffolds of the same design were physically characterized and tissue regeneration in terms of cell phenotype, cellular proliferation and differentiation, and matrix production were compared to find which material would be most optimal for cartilage regeneration in vitro. POC provided the best support for cartilage regeneration in terms of tissue ingrowth, matrix production, and relative mRNA expressions for chondrocyte differentiation (Col2/Col1). PGS was seen as the least favorable material for cartilage based on its relatively high de-differentiation (Col1), hypertrophic mRNA expression (Col10) and high matrix degradation (MMP13, MMP3) results. PCL still provided microenvironments suitable for cells to be active yet it seemed to cause de-differentiation (Col1) of chondrocytes inside the scaffold while many cells migrated out, growing cartilage outside the scaffold.

Mechanical, permeability, and degradation properties of 3D designed poly(1,8 octanediol-co-citrate) scaffolds for soft tissue engineering

Poly(1,8-octanediol-co-citric acid) (POC) is a synthetic biodegradable elastomer that can be processed into three-dimensional (3D) scaffolds for tissue engineering. We investigated the effect of designed porosity on the mechanical properties, permeability, and degradation profiles of the POC scaffolds. For mechanical properties, scaffold compressive data were fitted to a one-dimensional (1D) nonlinear elastic model, and solid tensile data were fitted to a Neohookean incompressible nonlinear elastic model. Chondrocytes were seeded on scaffolds to assess the biocompatibility of POC. Increased porosity was associated with increased degradation rate, increased permeability, and decreased mechanical stiffness, which also became less nonlinear. Scaffold characterization in this article will provide design guidance for POC scaffolds to meet the mechanical and biological parameters needed for engineering soft tissues such as cartilage.

Dipeptide-based polyphosphazene and polyester blends for bone tissue engineering

Polyphosphazene-polyester blends are attractive materials for bone tissue engineering applications due to their controllable degradation pattern with non-toxic and neutral pH degradation products. In our ongoing quest for an ideal completely miscible polyphosphazene-polyester blend system, we report synthesis and characterization of a mixed-substituent biodegradable polyphosphazene poly[(glycine ethyl glycinato)(1)(phenyl phenoxy)(1)phosphazene] (PNGEG/PhPh) and its blends with a polyester. Two dipeptide-based blends namely 25:75 (Matrix1) and 50:50 (Matrix2) were produced at two different weight ratios of PNGEG/PhPh to poly(lactic acid-glycolic acid) (PLAGA). Blend miscibility was confirmed by differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy. Both blends resulted in higher tensile modulus and strength than the polyester. The blends showed a degradation rate in the order of Matrix2 Collapse

Key Words

• polyphosphazenes
• poly(lactic acid-glycolic acid)
• polymeric blends
• biodegradation
• biocompatibility
• bone tissue engineering

Collapse

MESH Headings

• Animals
• Bone Substitutes/chemistry
• Bone Substitutes/metabolism
• Cell Proliferation
• Cells, Cultured
• Dipeptides/chemistry
• Dipeptides/metabolism
• Glycolates/chemistry
• Lactic Acid
• Male
• Materials Testing
• Organophosphorus Compounds/chemistry
• Organophosphorus Compounds/metabolism
• Osteoblasts/cytology
• Osteoblasts/metabolism
• Polyesters/chemistry
• Polyesters/metabolism
• Polyglycolic Acid
• Polylactic Acid-Polyglycolic Acid Copolymer
• Polymers/chemistry
• Polymers/metabolism
• Rats
• Rats, Sprague-Dawley
• Tissue Engineering/methods
• Tissue Scaffolds/chemistry

Collapse

Grants

• R01 AR052536 NIAMS NIH HHS
• R01 EB004051 NIBIB NIH HHS

Collapse

Affiliation(s)

Meng Deng Department of Orthopaedic Surgery, University of Connecticut, Farmington, Connecticut 06030 Department of Chemical Engineering, University of Virginia, Charlottesville, Virginia 22904
Lakshmi S. Nair Department of Orthopaedic Surgery, University of Connecticut, Farmington, Connecticut 06030 Department of Chemical, Materials and Biomolecular Engineering, University of Connecticut, Storrs, Connecticut 06269
Syam P. Nukavarapu Department of Orthopaedic Surgery, University of Connecticut, Farmington, Connecticut 06030 Department of Chemical, Materials and Biomolecular Engineering, University of Connecticut, Storrs, Connecticut 06269
Tao Jiang Department of Chemical Engineering, University of Virginia, Charlottesville, Virginia 22904
William A. Kanner Department of Pathology, University of Virginia, Charlottesville, Virginia 22903
Xudong Li Department of Orthopeadic Surgery, University of Virginia, Charlottesville, Virginia 22908
Sangamesh G. Kumbar Department of Orthopaedic Surgery, University of Connecticut, Farmington, Connecticut 06030 Department of Chemical, Materials and Biomolecular Engineering, University of Connecticut, Storrs, Connecticut 06269
Arlin L. Weikel Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania 16802
Nicholas R. Krogman Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania 16802
Harry R. Allcock Department of Chemistry, The Pennsylvania State University, University Park, Pennsylvania 16802
Cato T. Laurencin Department of Orthopaedic Surgery, University of Connecticut, Farmington, Connecticut 06030 Department of Chemical, Materials and Biomolecular Engineering, University of Connecticut, Storrs, Connecticut 06269

Collapse

Collaborators Collapse

Small intestinal submucosa gel as a potential scaffolding material for cardiac tissue engineering

Cardiac tissue engineering typically utilizes protein-rich scaffolding materials and growth factors to improve cardiac tissue function in vitro and in vivo. The objectives of this preliminary study were (i) to investigate the potential of porcine small intestinal submucosa gel (SIS gel) in cardiac tissue engineering and (ii) to compare the function of tissues based on either SIS gel or Matrigel, a tumor-derived benchmark material. Neonatal rat cardiac cells were combined with either SIS gel or Matrigel and cultured on porous elastomeric scaffolds composed of poly(glycerol sebacate) for 13days. Tissue function was assessed by measuring contraction rates twice daily. Tissue morphology was compared qualitatively by hematoxylin and eosin staining. Normalized troponin T expression (troponin T:DNA) was compared using image analysis. SIS gel constructs contracted at significantly higher rates than Matrigel constructs on days 8-11. Normalized troponin T expression was significantly higher in SIS gel constructs compared with Matrigel constructs. In summary, this research demonstrated that: (i) SIS gel can be used to create contractile engineered cardiac tissue; (ii) SIS gel produced engineered cardiac tissues with a more physiological contraction rate and higher phenotypic protein expression based on the basic in vitro examinations performed in this study.

Polyoctanediol citrate/sebacate bioelastomer films: surface morphology, chemistry and functionality

Elastomeric polyesters synthesized from non-toxic and biocompatible reactants are topical research materials for tissue-engineering applications. In such applications, the morphology, chemistry and functionality of the materials surfaces play a key role. While a number of papers have focused and reported on the fabrication and biological evaluation of elastic polyesters, only a few have attempted to characterise the surfaces of such materials. In this paper, we report on the preparation and surface characterization of films of a co-polyester bioelastomer, polyoctanediol citrate/sebacate (p(OCS)). The co-polymer was synthesized following the standard procedure of polyesterification using three non-toxic monomers (1,8-octanediol, citric acid and sebacic acid) in a catalyst-free environment. Nuclear magnetic resonance spectroscopy was used to monitor the chemical composition of the various p(OCS) elastomers. The p(OCS) films, prepared by both spin-coating and solvent casting of the p(OCS) pre-polymer solutions, were characterized by scanning electron microscopy, UV-Vis titration, photo-acoustic Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy, and tested for their cytocompatibility. The results obtained suggest that the surface morphology, chemistry and the concentration of the surface functional groups can be controlled by simply varying the initial acid concentration (citric/sebacic acids) in the pre-polymer. The films supported the attachment and proliferation of osteoblast-like cells (MG63). This unique approach provides an effective method of controlling and monitoring the fundamental p(OCS) surface properties important for their potential utilisation as a tissue-engineering material.

An elastomeric patch derived from poly(glycerol sebacate) for delivery of embryonic stem cells to the heart

We hypothesize that a combinatorial approach of ventricle constraint and stem cell therapy would offer a greater benefit for the treatment of heart failure than either strategy alone. A heart patch would serve two therapeutic purposes: biomechanical support and cell delivery. In this study, we describe a hybrid heart patch engineered from a synthetic elastomer, poly(glycerol sebacate) (PGS), supplemented with cardiomyocytes differentiated from human embryonic stem cells (hESCs). In line with two therapeutically relevant considerations, i.e. biocompatibility and cell delivery efficiency, the PGS was (a) pre-conditioned in culture medium for 6 days, and (b) prepared without gelatin coatings to facilitate detachment and delivery of cardiomyocytes following patch implantation. Following pre-conditioning under physiological conditions, the PGS patch material without gelatin coating was found to satisfactorily support cardiomyocyte viability and attachment, with active cell beating for periods of longer than 3 months until interrupted. Dynamic culture studies revealed that cells detached more efficiently from the uncoated surface of PGS than from gelatin-coated PGS. No significant differences were detected between the beating rates of human embryonic stem cell-derived cardiomyocytes on tissue culture plate and the pre-conditioned and gelatin-uncoated PGS. PGS patches sutured over the left ventricle of rats in vivo remained intact over a 2 week period without any deleterious effects on ventricular function. We conclude that PGS is a suitable biomaterial for stem cell-based regeneration strategies to restore cardiomyocyte function, and the hybrid heart patch engineered under optimal conditions would be a promising support device for the cardiac repair.

Tailoring the degradation kinetics of poly(ester carbonate urethane)urea thermoplastic elastomers for tissue engineering scaffolds

Biodegradable elastomeric scaffolds are of increasing interest for applications in soft tissue repair and regeneration, particularly in mechanically active settings. The rate at which such a scaffold should degrade for optimal outcomes, however, is not generally known and the ability to select from similar scaffolds that vary in degradation behavior to allow such optimization is limited. Our objective was to synthesize a family of biodegradable polyurethane elastomers where partial substitution of polyester segments with polycarbonate segments in the polymer backbone would lead to slower degradation behavior. Specifically, we synthesized poly(ester carbonate)urethane ureas (PECUUs) using a blended soft segment of poly(caprolactone) (PCL) and poly(1,6-hexamethylene carbonate) (PHC), a 1,4-diisocyanatobutane hard segment and chain extension with putrescine. Soft segment PCL/PHC molar ratios of 100/0, 75/25, 50/50, 25/75, and 0/100 were investigated. Polymer tensile strengths varied from 14 to 34 MPa with breaking strains of 660-875%, initial moduli of 8-24 MPa and 100% recovery after 10% strain. Increased PHC content was associated with softer, more distensible films. Scaffolds produced by salt leaching supported smooth muscle cell adhesion and growth in vitro. PECUU in aqueous buffer in vitro and subcutaneous implants in rats of PECUU scaffolds showed degradation slower than comparable poly(ester urethane)urea and faster than poly(carbonate urethane)urea. These slower degrading thermoplastic polyurethanes provide opportunities to investigate the role of relative degradation rates for mechanically supportive scaffolds in a variety of soft tissue repair and reconstructive procedures.

Challenges in cardiac tissue engineering

Cardiac tissue engineering aims to create functional tissue constructs that can reestablish the structure and function of injured myocardium. Engineered constructs can also serve as high-fidelity models for studies of cardiac development and disease. In a general case, the biological potential of the cell-the actual "tissue engineer"-is mobilized by providing highly controllable three-dimensional environments that can mediate cell differentiation and functional assembly. For cardiac regeneration, some of the key requirements that need to be met are the selection of a human cell source, establishment of cardiac tissue matrix, electromechanical cell coupling, robust and stable contractile function, and functional vascularization. We review here the potential and challenges of cardiac tissue engineering for developing therapies that could prevent or reverse heart failure.

A functionalizable polyester with free hydroxyl groups and tunable physiochemical and biological properties

Polyesters with free functional groups allow facile modifications with biomolecules, which can lead to versatile biomaterials that afford controlled interactions with cells and tissues. Efficient synthesis of functionalizable polyesters (Functionalizable polymer is defined as a polymer with functional groups that readily react with biomolecules and functionalized biomaterial as one already modified with biomolecules.) is still a challenge that greatly limits the availability and widespread applications of biofunctionalized synthetic polymers. Here we report a simple route to prepare a functionalizable polyester, poly(sebacoyl diglyceride) (PSeD) bearing free hydroxyl groups. The key synthetic step is an epoxide ring-opening polymerization, instead of the traditional polycondensation that produces poly(glycerol sebacate) (PGS) (Wang YD, Ameer GA, Sheppard BJ, Langer R. A tough biodegradable elastomer. Nat Biotechnol 2002;20(6):602-6). PSeD has a more defined structure with mostly linear backbone, more free hydroxyl groups, higher molecular weight, and lower polydispersity than PGS. Crosslinking PSeD with sebacic acid yields a polymer five times tougher and more elastic than cured PGS. PSeD exhibits good cytocompatibility in vitro. Furthermore, functionalization by glycine proceeds with high efficiency. This versatile synthetic platform can offer a large family of biodegradable, functionalized polymers with tunable physiochemical and biological properties useful for a wide range of biomedical applications.

Versatile Biodegradable Poly(ester amide)s Derived from α-Amino Acids for Vascular Tissue Engineering

Biodegradable poly(ester amide) (PEA) biomaterials derived from α-amino acids, diols, and diacids are promising materials for biomedical applications such as tissue engineering and drug delivery because of their optimized properties and susceptibility for either hydrolytic or enzymatic degradation. The objective of this work was to synthesize and characterize biodegradable PEAs based on the α-amino acids l-phenylalanine and l-methionine. Four different PEAs were prepared using 1,4-butanediol, 1,6-hexanediol, and sebacic acid by interfacial polymerization. High molecular weight PEAs with narrow polydispersity indices and excellent film-forming properties were obtained. The incubation of these PEAs in PBS and chymotrypsin indicated that the polymers are biodegradable. Human coronary artery smooth muscle cells were cultured on PEA films for 48 h and the results showed a well-spread morphology. Porous 3D scaffolds fabricated from these PEAs were found to have excellent porosities indicating the utility of these polymers for vascular tissue engineering.

Shape memory polymers with silicon-containing segments

Thermoresponsive shape memory polymers are stimuli-responsive materials whose shape is modulated by heat. They have been investigated as smart materials in a variety of biomedical, industrial and aerospace applications. The vast majority of shape memory polymers have been limited to those prepared from organic polymers. In this present work, shape memory polymers comprised of inorganic silicon-containing polymer segments (polydimethylsiloxane, PDMS) and organic poly(ε-caprolactone) (PCL) segments were developed. Because of its low T g, PDMS served as a highly effective soft segment. The photochemical cure of diacrylated PCL n -block-PDMS37-block-PCL n macromers with tailored PCL segment lengths produced networks with excellent mechanical properties, shape fixity, and shape recovery.

The use of surface modified poly(glycerol-co-sebacic acid) in retinal transplantation

Retinal transplantation experiments have advanced considerably during recent years, but remaining diseased photoreceptor cells in the host retina and inner retinal cells in the transplant physically obstruct the development of graft-host neuronal contacts which are required for vision. Recently, we developed methods for the isolation of donor photoreceptor layers in vitro, and the selective removal of host photoreceptors in vivo using biodegradable elastomeric membranes composed of poly(glycerol-co-sebacic acid) (PGS). Here, we report the surface modification of PGS membranes to promote the attachment of photoreceptor layers, allowing the resulting composite to be handled surgically as a single entity. PGS membranes were chemically modified with peptides containing an arginine-glycine-aspartic acid (RGD) extracellular matrix ligand sequence. PGS membranes were also coated with electrospun nanofiber meshes, containing laminin and poly(epsilon-caprolactone) (PCL). Following in vitro co-culture of biomaterial membranes with isolated embryonic retinal tissue, composites were tested for surgical handling and examined with hematoxylin and eosin staining and immunohistochemical markers. Electrospun nanofibers composed of laminin and PCL promoted sufficient cell adhesion for simultaneous transplantation of isolated photoreceptor layers and PGS membranes. Composites developed large populations of recoverin and rhodopsin labeled photoreceptors. Furthermore, ganglion cells, rod bipolar cells and AII amacrine cells were absent in co-cultured retinas as observed by neurofilament, PKC and parvalbumin labeling respectively. These results facilitate retinal transplantation experiments in which a composite graft composed of a biodegradable membrane adhered to an immature retina dominated by photoreceptor cells may be delivered in a single surgery, with the possibility of improving graft-host neuronal connections.

Scaffold Sheet Design Strategy for Soft Tissue Engineering

Creating heterogeneous tissue constructs with an even cell distribution and robust mechanical strength remain important challenges to the success of in vivo tissue engineering. To address these issues, we are developing a scaffold sheet tissue engineering strategy consisting of thin (∼200 μm), strong, elastic, and porous crosslinked urethane-doped polyester (CUPE) scaffold sheets that are bonded together chemically or through cell culture. Suture retention of the tissue constructs (four sheets) fabricated by the scaffold sheet tissue engineering strategy is close to the surgical requirement (1.8 N) rendering their potential for immediate implantation without a need for long cell culture times. Cell culture results using 3T3 fibroblasts show that the scaffold sheets are bonded into a tissue construct via the extracellular matrix produced by the cells after 2 weeks of in vitro cell culture.

A tissue-engineered approach towards retinal repair: scaffolds for cell transplantation to the subretinal space

BACKGROUND

Several mechanisms of retina degeneration result in the deterioration of the outer retina and can lead to blindness. Currently, with the exception of anti-angiogenic treatments for wet age-related macular degeneration, there are no treatments that can restore lost vision. There is evidence that photoreceptors and embryonic retinal tissue, transplanted to the subretinal space, can form new synapses with surviving host neurons. However, these transplants have yet to result in a clinical treatment for retinal degeneration.

METHODS

This article reviews the current literature on the transplantation of scaffolds with retinal and retinal pigmented epithelial (RPE) cells to the subretinal space. We discuss the types of cells and materials that have been investigated for transplantation to the subretinal space, summarize the current findings, and present opportunities for future research and the next generation of scaffolds for retinal repair.

RESULTS

Challenges to cell transplantation include limited survival upon implantation and the formation of abnormal cell architectures in vivo. Scaffolds have been shown to enhance cell survival and direct cell differentiation and organization in a number of models of retinal degeneration.

CONCLUSIONS

The transplantation of cells within a scaffold represents a possible treatment to repair retinal degeneration and restore vision in effected patients. Materials have been developed for the delivery of retinal and RPE cells separately however, the development of a combined tissue-engineered scaffold targeting both cell populations represents a promising direction for retinal repair.

Preparation and properties of a novel biodegradable polyester elastomer with functional groups

A novel biodegradable poly(sebacate-glycerol-citrate) (PGSC) elastomer with functional groups was prepared in this study. First, moldable mixtures were obtained by mixing citric acid with the poly(glycerol-sebacate) (PGS) pre-polymers synthesized in our lab. The PGSC elastomers were obtained from moldable mixtures that were thermally cured in the moulds. Then, the structures, compositions and properties of the elastomers were studied by Fourier transformation infrared spectroscopy (FT-IR), swelling test, differential scanning calorimeter (DSC), tensile test, water contact angle measurement, water absorption experiments and a in vitro degradation test. It showed that the hydroxyl groups remained in the elastomers which would endow the polymer chains with functionality such as good surface modification. By controlling the thermal curing time, the compositions of the PGSC elastomers were adjusted for different mechanical and biodegradable properties. Therefore, PGSC elastomers might be used as anti-conglutination films in surgery, guided tissue regeneration membranes and drug-delivery matrices.

Tissue Response to, and Degradation Rate of, Photocrosslinked Trimethylene Carbonate-Based Elastomers Following Intramuscular Implantation

Cylindrical elastomers were prepared through the UV-initiated crosslinking of terminally acrylated, 8,000 Da star-poly(trimethylene carbonate-co-ε-caprolactone) and star-poly(trimethylene carbonate-co-d,l-lactide). These elastomers were implanted intramuscularly into the hind legs of male Wistar rats to determine the influence of the comonomer on the weight loss, tissue response, and change in mechanical properties of the elastomer. The elastomers exhibited only a mild inflammatory response that subsided after the first week; the response was greater for the stiffer d,l-lactide-containing elastomers. The elastomers exhibited weight loss and sol content changes consistent with a bulk degradation mechanism. The d,l-lactide-containing elastomers displayed a nearly zero-order change in Young’s modulus and stress at break over the 30 week degradation time, while the ε-caprolactone-containing elastomers exhibited little change in modulus or stress at break.