Discovery and quantification of plastic particle pollution in human blood

The potential toxicity of polystyrene nanoplastics to human trophoblasts in vitro

Nanoplastics (NPs), the emerging contaminants in recent years, widely distributed in the environment and are bioaccumulated and biomagnified in organisms through food chain. A growing number of studies have detected plastic particulates in human placenta and blood. However, few studies have focused on their effects during human pregnancy. Herein, human trophoblast HTR-8/Svneo cells were used to evaluate the effects and the possible mechanism of 100-nm polystyrene NPs on placental trophoblasts at the maternal-fetal interface. The results showed that NPs entered the trophoblastic cytoplasm, decreased cell viability, caused cell cycle arrest, reduced the cell migration and invasion abilities, increased level of intracellular reactive oxygen species and the production of proinflammatory cytokines (TNF-α and IFN-γ) in a dose-dependent manner. Furthermore, global transcriptome sequencing (RNA-Seq) was performed on HTR-8/Svneo cells with or without 100 μg/mL PS-NP exposure for 24 h. A total of 344 differentially expressed genes were detected. The gene functions for regulation of leukocyte differentiation, response to stimulus, cell cycle, apoptotic process, and cell adhesion were enriched. Thyroid hormone, Hippo, TGF-β and FoxO signaling pathways were activated. Collectively, our data provided evidences for the adverse consequences of NPs on the biological functions of trophoblasts, which provided new insights into the potential trophoblast toxicity of NPs in mammals.

Secondary microplastics formation and colonized microorganisms on the surface of conventional and degradable plastic granules during long-term UV aging in various environmental media

Recently, biodegradable plastics (BPs) as an alternative of conventional plastics have been widely advocated and applied. However, there is still a large research gap between the formation of secondary microplastics (MPs) and colonized microorganisms on their surface under long-term aging in different environments. In this study, the generation of secondary MPs and the formation of surface biofilms on the micro-sized (3-5 mm) biodegradable plastic poly (butyleneadipate-co-terephthalate) (BP-PBAT) and conventional plastic polyvinyl chloride (CP-PVC) under long-term UV aging was investigated. The results showed that hundreds and even thousands of MPs (185.53 ± 85.73 items/g - 1473.27 ± 143.67 items/g) were generated by BP-PBAT and CP-PVC after aged for 90 days, and the abundance of MPs produced by BP-PBAT was significantly higher than that of CP-PVC. Moreover, the α diversities and detected OTU number of biofilm communities formed on MPs increased with MPs-aging. The genes related to the formation of biofilms was significantly expressed on aged MPs and the genes related to human pathogens and diseases were also detected in enriching on MPs surface. Overall, BPs may lead to greater ecological risks as it releases thousands of secondary MPs after being aged, and their environmental behavior needs to be further explored.

Polydiketoenamines for a Circular Plastics Economy

The mismanagement and leakage of plastic waste into the environment are failures of modern society. Once in the environment, plastic waste degrades into microplastics on a time scale dependent on the resin chemistry and the associated biotic or abiotic process. The high surface area of microplastics results in the contamination of ecosystems through the leaching of toxic chemicals compounded with plastics during manufacturing. In addition, the small size of microplastics increases the likelihood that they will be inhaled or ingested, which has led to the bioaccumulation of microplastics with documented harm. Furthermore, microplastics are more readily aerosolized and distributed by weather systems to areas remote from locations where plastic waste has been mismanaged. Consequently, the carbon cycle must now account for plastic waste discharge, degradation, and dispersal in the environment after the end of useful life on a global scale.Circularity in plastics recycling endeavors to solve the waste problem while promoting greater sustainability. Circularity can be conducted at different stages in the plastics life cycle. Post-industrial recycling enabling scrap recovery in manufacturing is desirable for industrial material efficiency. However, the degradation of polymer chains currently limits the extent to which scrap recovery may be practiced repeatedly on the same material, particularly when the conversion of secondary resin to various plastic products is intolerant to deviations in polymer properties. Post-consumer recycling, on the other hand, is desirable for erasing the manufacturing history and use history of plastic-containing products. Post-consumer recycling involves cleaning and sorting plastic waste into bales, followed by mechanical recycling to produce dense feedstocks for downstream chemical processes required for deconstruction, monomer refinement, and secondary resin production. The efficiency and intensity of chemical processes used to recover reusable monomers or polymers remain low for most plastics. Consequently, there is an urgent need for novel polymers with useful or advantageous properties designed for recycling by addressing the challenges of resource recovery for reuse.In this Account, I discuss the design, discovery, and development of circular plastics based on the chemistry of polydiketoenamines. The diketoenamine bond provides a vantage point for the creation of thermoplastics, elastomers, and thermosets from polytopic triketone and amine monomers. The dynamic covalent character of the diketoenamine bond can be exploited during scrap recovery to provide resilience during mechanical recycling, maintaining baseline properties of the primary resin through multiple cycles of reuse. Furthermore, the hydrolyzability of the diketoenamine bond in strong acid can be exploited for efficient monomer recovery during chemical recycling. A systems-level analysis of polydiketoenamine circularity reveals substantive benefits in low-carbon manufacturing as well as a context to quantify the market potential, identifying use cases where circularity might be most effective. Leveraging these insights, it is possible to guide the process chemistry development necessary to scale monomer and resin production to meet imminent needs for more circular plastics in the market. These insights also provide a glimpse into the underlying molecular mechanisms critical to circularity in a new plastics economy while firmly establishing a role for creativity in polymer chemistry to provide innovative solutions.

Microplastics from agricultural plastic mulch films: A mini-review of their impacts on the animal reproductive system

Plastic mulch films (PMFs) are widely used to improve crop quality and quantity. Although they provide a range of benefits, they degrade into widespread microplastics (MPs), which can cause an unavoidable risk of environmental problems. The residue of PMFs is a significant source of MPs in soils, which can then spread into various ecosystems and be easily absorbed by organisms due to their small size, and subsequently transported through food chain. Notably, MPs have been found in the human placenta, stool and blood, raising an urgent reminder of the potential dangers of MPs to human health. This review summarizes recent studies concerning the effects of MPs on the reproductive system in soil invertebrates, aquatic animals and rodents of both sexes and the mechanisms by which MPs affect the animal reproductive system. The studies on females demonstrated that MPs decrease oocyte quantity and quality, and induce ovary fibrosis, pyroptosis and apoptosis of granulosa cells. In addition, disrupted integrity of the blood-testis barrier, damaged spermatogenesis and compromised sperm quality have been shown in most studies on male animals. The studies on the mechanisms of these effects have provided evidence that MPs act on the animal reproductive system through reactive oxygen species-related mechanisms by initiating the Wnt/β-Catenin and NLRP3/Caspase-1 pathways in females, and the Nrf2/HO-1/NF-κB, p38 MAPK and MAPK/Nrf2 pathways in males. Taken together, these studies reveal the reproductive toxicity of MPs from PMF on animals and serve as a reminder to properly dispose of PMF waste.

Microplastics-sorbed phenanthrene and its derivatives are highly bioaccessible and may induce human cancer risks

Microplastics (MPs) are ubiquitous in environmental media and human diets and can enrich organic contaminants, including polycyclic aromatic hydrocarbons (PAHs) and their derivatives. The bioaccessibilities and triggering cancer risks of MP-sorbed PAHs and PAH derivatives are closely linked with human health, which, however, were rarely focused on. This study explored the sorption behaviors of phenanthrene (PHE) and PHE derivatives on polyethylene (PE), polypropylene (PP), and polystyrene (PS) MPs, and assessed their bioaccessibilities in gastrointestinal fluids as well as their inducing human cancer risks. PE MPs harbored the highest sorption capacity, secondly the PP MPs, then the PS ones. Sorption of PHE and PHE derivatives on MPs was positively correlated with their hydrophobicities. The bioaccessibilities of sorbed PHE and PHE derivatives could reach 53.59 %±0.46 %-90.28 %±0.92 % in gastrointestinal fluids and 81.34 %±0.77 %-98.72 %±1.44 % in gastrointestinal fluids with the addition of Tenax (more close to the bioavailability). The hydrophobicities also controlled the bioaccessibilities of PHE and PHE derivatives in gastric fluids, and those in intestinal fluids with Tenax for PS MPs. The incremental lifetime cancer risk (ILCR) values for PHE, PHE-Cl, and PHE-NO2 on MPs at tested concentrations were all higher than the USEPA-suggested safety limit (10-6), and most of them were even higher than 10-4, which thus indicates serious cancer risks. This study promoted our understanding of the potential health threats posed by organic pollutant-bearing MPs in the environment.

Insights into N2O turnovers under polyethylene terephthalate microplastics stress in mainstream biological nitrogen removal process

The ubiquitous microplastics in wastewater have raised growing concerns due to their unintended effects on microbial activities. However, whether and how microplastics affect nitrous oxide (N₂O) (a potent greenhouse gas) turnovers in mainstream biological nitrogen removal (BNR) process remain unclear. This work therefore aimed to fill such knowledge gap by conducting both long-term and batch tests. After over 100 days of feeding with wastewater containing polyethylene terephthalate (PET) microplastics (0-500 μg/L), the long-term results showed that both production and reduction of N₂O during denitrification were reduced, as well as the N₂O production during nitrification. Accordingly, 60% reduction in N₂O accumulation and 70% reduction in N₂O production were observed in the denitrification and nitrification batch tests, respectively. Nevertheless, the long-term N₂O emission factors under PET microplastics stress were comparable to that in the control reactor, mainly because PET microplastics led to more nitrite accumulation in anoxic period. With the aid of online N₂O sensors and site-preference analysis, it was demonstrated that the heterotrophic bacteria pathway and ammonia oxidizing bacteria denitrification pathway for N₂O production were negatively affected by PET microplastics, whereas a clear increase in the contribution of hydroxylamine pathway (+ 22.9%) was observed. Further investigation revealed that PET microplastics even at environmental level (i.e. 10 μg/L) significantly reshaped the BNR sludge characteristics (e.g. much larger particle size) and microbial communities (e.g. Thauera, Rhodobacte and Nitrospira) as well as the nitrogen metabolism pathways, which were chiefly responsible for the changes of N₂O turnovers and N₂O production pathways under the PET microplastics stress.

Occurrence, distribution, and characteristics of microplastics in agricultural soil around a solid waste treatment center in southeast China

PURPOSE

In recent years, microplastic (MP) contamination has raised enormous concern. However, data on the influence of solid waste treatment systems on MP pollution around agricultural soil are lacking. This study investigated the distribution and characteristics of MPs in agricultural soil surrounding a solid waste treatment center in southeastern China.

MATERIALS AND METHODS

Fifty-seven agricultural topsoil samples around the solid waste treatment center were collected. The samples were pretreated by drying, flotation separation using NaCl solution, and digestion by H₂O₂. The abundance and morphological characteristics of MPs were determined by a microscope, followed by Raman spectroscopy analysis identified polymer types and SEM-EDS analysis observed surface morphology and the type of metals accumulated on the MPs.

RESULTS AND DISCUSSION

Soil MPs' abundance ranged from 280 to 2360 items/kg, while a higher abundance of MPs was distributed in the downwind area. The < 1-mm MPs were dominant, and white fragment MPs were widely found. Polyethylene (52.86%) and polypropylene (27.14%) were the most common. Moreover, SEM-EDS images illustrated that MPs were significantly weathered and showed the uneven distribution of metal(loid) elements on the surface, implying that MPs may migrate as heavy metal vectors to threaten agroecosystem safety.

CONCLUSIONS

This study reveals the distribution and characteristics of MPs in agricultural soil surrounding a solid waste treatment center in southeastern China, as well as the potential source of soil MPs, and provides systematic data for further research on MP pollution in agricultural soil.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s11368-022-03341-6.

Effects of Polystyrene Microplastics on Human Kidney and Liver Cell Morphology, Cellular Proliferation, and Metabolism

Microplastics have gained much attention due to their prevalence and abundance in our everyday lives. They have been detected in household items such as sugar, salt, honey, seafood, tap water, water bottles, and food items wrapped in plastic. Once ingested, these tiny particles can travel to internal organs such as the kidney and liver and cause adverse effects on the cellular level. Here, human embryonic kidney (HEK 293) cells and human hepatocellular (Hep G2) liver cells were used to examine the potential toxicological effects of 1 μm polystyrene microplastics (PS-MPs). Exposing cells to PS-MPs caused a major reduction in cellular proliferation but no significant decrease in cell viability as determined by the trypan blue assay in both cell lines. Cell viability remained at least 94% for both cell lines even at the highest concentration of 100 μg/mL of PS-MPs. Phase-contrast imaging of both kidney and liver cells exposed to PS-MPs at 72 h showed significant morphological changes and uptake of PS-MP particles. Confocal fluorescent microscopy confirmed the uptake of 1 μm PS-MPs at 72 h for both cell lines. Additionally, flow cytometry experiments verified that more than 70% of cells internalized 1 μm PS-MPs after 48 h of exposure for both kidney and liver cells. Reactive oxygen species (ROS) studies revealed kidney and liver cells exposed to PS-MPs had increased levels of ROS at each concentration and for every time point tested. Furthermore, quantitative reverse transcription polymerase chain reaction (qRT-PCR) analysis at 24 and 72 h revealed that both HEK 293 and Hep G2 cells exposed to PS-MPs lowered the gene expression levels of the glycolytic enzyme, glyceraldehyde-3-phosphate dehydrogenase (GAPDH), and antioxidant enzymes superoxide dismutase 2 (SOD2) and catalase (CAT), thus reducing the potential of SOD2 and CAT to detoxify ROS. These adverse effects of PS-MPs on human kidney and liver cells suggest that ingesting microplastics may lead to toxicological problems on cell metabolism and cell-cell interactions. Because exposing human kidney and liver cells to microplastics results in morphological, metabolic, proliferative changes and cellular stress, these results indicate the potential undesirable effects of microplastics on human health.

Impacts of microplastics on immunity

Most disposable plastic products are degraded slowly in the natural environment and continually turned to microplastics (MPs) and nanoplastics (NPs), posing additional environmental hazards. The toxicological assessment of MPs for marine organisms and mammals has been reported. Thus, there is an urgent need to be aware of the harm of MPs to the human immune system and more studies about immunological assessments. This review focuses on how MPs are produced and how they may interact with the environment and our body, particularly their immune responses and immunotoxicity. MPs can be taken up by cells, thus disrupting the intracellular signaling pathways, altering the immune homeostasis and finally causing damage to tissues and organs. The generation of reactive oxygen species is the mainly toxicological mechanisms after MP exposure, which may further induce the production of danger-associated molecular patterns (DAMPs) and associate with the processes of toll-like receptors (TLRs) disruption, cytokine production, and inflammatory responses in immune cells. MPs effectively interact with cell membranes or intracellular proteins to form a protein-corona, and combine with external pollutants, chemicals, and pathogens to induce greater toxicity and strong adverse effects. A comprehensive research on the immunotoxicity effects and mechanisms of MPs, including various chemical compositions, shapes, sizes, combined exposure and concentrations, is worth to be studied. Therefore, it is urgently needed to further elucidate the immunological hazards and risks of humans that exposed to MPs.

Derivatives of Plastics as Potential Carcinogenic Factors: The Current State of Knowledge

Simple Summary

Nowadays, micro- and nanoplastic particles can be found almost everywhere, being especially harmful for humans. Their absorption, primarily via inhalation and digestive routes, might lead to a particularly dangerous accumulation of those substances within the human body. Due to the alarming increase in contamination worldwide and excessive production of plastics and synthetic materials, there is an urgent need to investigate the effects of those substances on human health. So far, it has been observed that nano- and microplastics might be extremely harmful, leading to serious health conditions, such as cancers of various human body systems.

Abstract

Micro- and nanoplatics have been already reported to be potential carcinogenic/mutagenic substances that might cause DNA damage, leading to carcinogenesis. Thus, the effects of micro- and nanoplastics exposure on human health are currently being investigated extensively to establish clear relationships between those substances and health consequences. So far, it has been observed that there exists a definite correlation between exposure to micro- and nanoplastic particles and the onset of several cancers. Therefore, we have conducted research using PubMed, Web of Science, and Scopus databases, searching for all the research papers devoted to cancers that could be potentially related to the subject of exposure to nano- and microplastics. Ultimately, in this paper, we have discussed several cancers, including hepatocellular carcinoma, pancreatic cancer, pancreatic ductal adenocarcinoma, biliary tract cancer, and some endocrine-related cancers.

A rapid method for extracting microplastics from oily food samples

The increasing evidence of microplastic (MP) contamination influence on aquatic organisms has been extensively reported globally. However, the discussions of extracting MPs from oily food samples are limited, highlighting the pressing need for effective and standardized analytical methods to extract MPs from oily food. Previous methods, such as using acid, alkali or oxidizing solutions as digestion reagents, usually take a long time to digest oily food, increasing the possibility of procedural contamination of MPs in food over time. The objective of this study was to develop a rapid, efficient, economical and simple analytical method to extract MPs from oily food samples. This innovative protocol combines the use of 4 : 1 HNO₃ : H₂O₂ as a digestion reagent to accelerate the digestion within 1 h at 50 °C and hexane as a washing solution to remove the oil adsorbed on the surface of MPs and membranes. Four common types of MPs, namely, polyethylene terephthalate, polyethylene, polystyrene and polypropylene of different sizes were added to oily flours to demonstrate this method. The mean recovery of MPs was 95% ± 2% (range: 93-98%), and no significant changes in color, particle size, surface area and spectrum features were found for all recovered polymers except for PS with minor changes in color and surface. The method was confirmed to be effective on rice, noodles, bean products and various meat samples. All in all, the present method can facilitate the observation and identification of characteristics of MPs, providing an innovative combination method for quantitative and qualitative analyses of MPs in oily food samples.

Identification and Evaluation of Microplastics from Tea Filter Bags Based on Raman Imaging

Microplastic (MP) contamination is a public issue for the environment and for human health. Plastic-based food filter bags, including polyethylene terephthalate, polypropylene, nylon 6 (NY6), and polyethylene, are widely used for soft drink sub-packaging, increasing the risk of MPs in foods and the environment. Three types of commercially available filter bags, including non-woven and woven bags, were collected, and MPs released after soaking were mapped using Raman imaging combined with chemometrics. Compared with peak area imaging at a single characteristic peak, Raman imaging combined with direct classical least squares calculation was more efficient and reliable for identifying MP features. Up to 94% of the bags released MPs after soaking, and there was no significant correlation with soaking conditions. Most MPs were tiny fragments and particles, and a few were fibrous MPs 620–840 μm in size. Woven NY6 filter bags had the lowest risk of releasing MPs. Source exploration revealed that most MPs originated from fragments and particles adsorbed on the surface of bags and strings. The results of this study are applicable to filter bag risk assessment and provide scientific guidance for regulating MPs in food.

First evidence of microplastics isolated in European citizens' lower airway

Microplastics (MPs) have been detected in all environmental locations, including the atmosphere. However, few studies have investigated the presence of airborne MPs in the human respiratory system. Our research purpose was to investigate these pollutants in the lower human airways of 44 adult European citizens, using bronchoalveolar lavage fluid (BALF) collection as a minimally invasive method, that enables the detection of these pollutants in living patients. We studied the relationship between the patients' life habits and physiological parameters, based on background information and medical and occupational history, and the concentration of MPs isolated from their respiratory systems. Our results indicate that most MPs were in the form of microfibers (MFs) (97.06%), with an average concentration of 9.18 ± 2.45 items/100 mL BALF, and only 5.88% (0.57 ± 0.27 items/100 mL BALF) were particulate MPs, without a significant relationship with environmental, physiological, or clinical factors. The average size was 1.73 ± 0.15 mm, with the longest dimension (9.96 mm) corresponding to a polyacrylic fiber. Taken together, the results demonstrated the occurrence of MPs in the lower human airway, although more studies are necessary to elucidate the negative effects these pollutants could induce in the human respiratory system and its associated diseases.

HS-GC-IMS identification of volatile aromatic compounds of freshly-cooked rice packaged with different disposable lunchboxes

The rapid development of online-to-offline food delivery service has necessitated the replacement of plastic lunchbox using biodegradable ones. In current study, a total number of fourteen panelists were firstly recruited and trained to investigate how different commercial disposable lunchboxes affect the freshly cooked rice sensory properties during heat preservation (60 °C, 60 min). The lunchboxes were made of pure polypropylene (PP), polypropylene-starch (PP-S), pure wheat-straw and sugarcane-straw (WS & SS) and Paper. The discrepancy of volatile aromatic substances was then analyzed using headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS) to study the possible mechanism beneath the variations of the influences of different lunchboxes on the aromatic properties of rice. Results showed that, compared with the textural attributes, the aroma was significantly and positively correlated with panelist's acceptability, among which, the aroma of starchy, sulfur and smoky are the most important ones. The moisture absorption plays an important role in affecting the aromatic characteristics of the packaged rice. While all lunchboxes have inhibitory effects on the production of volatile flavor substances including 2,6-Dimethylpyrazine, 2-Acetylpyrazine and γ-Octalactone, pure PP and PP-S lunchboxes generated undesirable flavor substances including 2-Ethyl-1-hexanl and Camphene, and thus reduced panelist's preferences. It was also found that the panelist liked the rice packaged by Paper lunchbox the best because of its better performance in maintaining the aroma of starchy and sulfur, the two substances that are associated with the higher concentration of ethereal and fruity volatile flavor substances. This study provides important information for manufacturers to understand how different disposable lunchboxes may impact the textural and aromatic properties of packaged foods.

Free, but not microplastic-free, drinking water from outdoor refill kiosks: A challenge and a wake-up call for urban management

Free refill drinking water kiosks are an essential sustainable water supply system for people in metropolitan areas worldwide. Despite their importance in urban settings, the impact of microplastic contamination remains elusive. Here, we investigated the occurrence and characteristics of microplastics in drinking-water samples collected from 22 self-distributed refill kiosks located in 14 multiuse urban parks spread across nine municipalities in Mexico City (Mexico). The results showed that microplastics were detected in all the samples, with an overall mean concentration of 74.18 ± 48.76 microplastics L^-1. The abundance of microplastics was significantly different between sampled kiosks, ranging from 23 ± 11.31 to 202 ± 28.39 microplastics L^-1. There were more fibrous microplastics (88%) than fragments (9%) and films (3%), with the majority (56%) being <200 μm in length. They were predominantly transparent (85%), with only a few being colored (15%; blue, red, green, and brown). Attenuated Total Reflection-Fourier-transform infrared spectroscopy further revealed microplastics of various polymer types, including polyvinyl alcohol, high-density polyethylene, polypropylene, polyvinyl acetate, ethylene vinyl alcohol, acrylic, alkyd resin, and viscose. Based on our findings, drinking water from urban refill kiosks exposes children more than adults to microplastics. Furthermore, the steps that should be taken at urban refill kiosks to prevent microplastic pollution while offering recreational services to people have been highlighted. Therefore, this first study serves as a wake-up call to urban water management to improve the safety of water from emerging pollutants like microplastics in the infrastructure of refill kiosks.

Pigment microparticles and microplastics found in human thrombi based on Raman spectral evidence

INTRODUCTION

Environmental microparticle is becoming a global pollutant and the entire population is increasingly exposed to the microparticles from artificial materials. The accumulation of microparticles including microplastics and its subsequent effects need to be investigated timely to keep sustainable development of human society.

OBJECTIVES

This study aimed to explore the accumulation of environmental particles in thrombus, the pathological structure in the blood circulation system.

METHODS

Patients receiving cardiovascular surgical operations were screened and twenty-six thrombi were collected, digested and filtered. Non-soluble microparticles were enriched on the filter membrane and then were analyzed and identified with Raman Spectrometer. The associations of particle status (presence or absence) or particle number in the thrombus and clinical indicators were examined. One strict quality control-particle detection system was designed to eliminate environmental contaminations.

RESULTS

Among twenty-six thrombi, sixteen contained eighty-seven identified particles ranging from 2.1 to 26.0 μm in size. The number of microparticles in each thrombus ranged from one to fifteen with the median reaching five. All the particles found in thrombi were irregularly block-shaped. Totally, twenty-one phthalocyanine particles, one Hostasol-Green particle, and one low-density polyethylene microplastic, which were from synthetic materials, were identified in thrombi. The rest microparticles included iron compounds and metallic oxides. After the adjustment for potential confounders, a significantly positive association between microparticle number and blood platelet levels was detected (P < 0.01).

CONCLUSION

This study provides the first photograph and Raman spectrum evidence of microparticles in thrombi. A large number of non-soluble particles including synthetic material microparticles could accumulate in arteries, suggesting that the risk of microparticle exposure was under-estimated and the re-evaluation of its health effects is urgently needed. There will be a series of reports on assessing the health effects of microparticle exposure in humans in the future and this research provided clues for the subsequent research.

Deeply in Plasticenta: Presence of Microplastics in the Intracellular Compartment of Human Placentas

Microplastics (MPs) are defined as plastic particles smaller than 5 mm. They have been found almost everywhere they have been searched for and recent discoveries have also demonstrated their presence in human placenta, blood, meconium, and breastmilk, but their location and toxicity to humans have not been reported to date. The aim of this study was twofold: 1. To locate MPs within the intra/extracellular compartment in human placenta. 2. To understand whether their presence and location are associated with possible structural changes of cell organelles. Using variable pressure scanning electron microscopy and transmission electron microscopy, MPs have been localized in ten human placentas. In this study, we demonstrated for the first time the presence and localization in the cellular compartment of fragments compatible with MPs in the human placenta and we hypothesized a possible correlation between their presence and important ultrastructural alterations of some intracytoplasmic organelles (mitochondria and endoplasmic reticulum). These alterations have never been reported in normal healthy term pregnancies until today. They could be the result of a prolonged attempt to remove and destroy the plastic particles inside the placental tissue. The presence of virtually indestructible particles in term human placenta could contribute to the activation of pathological traits, such as oxidative stress, apoptosis, and inflammation, characteristic of metabolic disorders underlying obesity, diabetes, and metabolic syndrome and partially accounting for the recent epidemic of non-communicable diseases.

Microplastic atmospheric dustfall pollution in urban environment: Evidence from the types, distribution, and probable sources in Beijing, China

Airborne microplastics (MPs) pollution is an environmental problem of increasing concern, due to the ubiquity, persistence and potential toxicity of plastics in the atmosphere. In recent years, most studies on MPs have focused on aquatic and sedimentary environments, but little research has been done on MPs in the urban atmosphere. In this study, a total of ten dustfall samples were collected in a transect from north to south across urban Beijing. The compositions, morphologies, and sizes of the MPs in these dustfall samples were determined by means of Laser Direct Infrared (LDIR) imaging and Field Emission Scanning Electron Microscopy (FESEM). The number concentrations of MPs in the Beijing dustfall samples show an average of 123.6 items/g. The MPs concentrations show different patterns in the central, southern, and northern zones of Beijing. The number concentration of MPs was the highest in the central zone (224.76 items/g), as compared with the southern zone (170.55 items/g), and the northern zone (24.42 items/g). The LDIR analysis revealed nine compositional types of MPs, including Polypropylene (PP), Polyamide (PA), Polystyrene (PS), Polyethylene (PE), Polyethylene Terephthalate (PET), Silicone, Polycarbonate (PC), Polyurethane (PU) and Polyvinylchloride (PVC), among which PP was overall dominant. The PP dominates the MPs in the central zone (76.3%), and the PA dominates the MPs in the southern zone (55.86%), while the northern zone had a diverse combination of MPs types. The morphological types of the individual MPs particle include fragments, pellets, and fibers, among which fragments are dominant (70.9%). FESEM images show the presence of aged MPs in the Beijing atmosphere, which could pose a yet unquantified health risk to Beijing's residents. The average size of the MPs in the Beijing samples is 66.62 μm. Our study revealed that the numbers of fibrous MPs increase with the decrease in size. This pollution therefore needs to be carefully monitored, and methods of decreasing the sources and mitigations developed.

Interactions of microplastics with organic, inorganic and bio-pollutants and the ecotoxicological effects on terrestrial and aquatic organisms

As emerging contaminants, microplastics (MPs) have attracted global attention. They are a potential risk to organisms, ecosystems and human health. MPs are characterized by small particle sizes, weak photodegradability, and are good environmental carriers. They can physically adsorb or chemically react with organic, inorganic and bio-pollutants to generate complex binary pollutants or change the environmental behaviors of these pollutants. We systematically reviewed the following aspects of MPs: (i) Adsorption of heavy metals and organic pollutants by MPs and the key environmental factors affecting adsorption behaviors; (ii) Enrichment and release of antibiotic resistance genes (ARGs) on MPs and the effects of MPs on ARG migration in the environment; (iii) Formation of "plastisphere" and interactions between MPs and microorganisms; (iv) Ecotoxicological effects of MPs and their co-exposures with other pollutants. Finally, scientific knowledge gaps and future research areas on MPs are summarized, including standardization of study methodologies, ecological effects and human health risks of MPs and their combination with other pollutants.

Polystyrene microplastic exposure induces insulin resistance in mice via dysbacteriosis and pro-inflammation

Microplastics (MPs) as emerging contaminants have become a global environmental problem. However, studies on the effects of MPs on metabolic diseases remain limited. Here, we evaluated the effects of polystyrene (PS), one of the most prominent types of MPs, on insulin sensitivity in mice fed with normal chow diet (NCD) or high-fat diet (HFD), and explained the underlying mechanisms. Mice fed with NCD or HFD both showed insulin resistance (IR) after PS exposure accompanied by increased plasma lipopolysaccharide and pro-inflammatory cytokines such as tumor necrosis factor-α and interleukin-1β. Exposure to PS also resulted in a significant decrease in the richness and diversity of gut microbiota, particularly an increase in the relative abundance of Gram-negative bacteria such as Prevotellaceae and Enterobacteriaceae. Additionally, PS with a small particle size (5 μm) accumulated in the liver, kidneys and blood vessels of mice. Further analyses showed inhibition of the insulin signaling pathway in the liver of PS exposed mice, such as inhibition of IRS1 and decreased expression of PI3K. Hence, the mechanism of PS exposure to induce IR in mice might be mediated through regulating gut microbiota and PS accumulation in tissues, stimulating inflammation and inhibiting the insulin signaling pathway. In conclusion, PS might be a potential environmental contaminant that causes metabolic diseases associated with IR.

Micro- and Nanoplastics’ Effects on Protein Folding and Amyloidosis

A significant portion of the world’s plastic is not properly disposed of and, through various processes, is degraded into microscopic particles termed micro- and nanoplastics. Marine and terrestrial faunae, including humans, inevitably get in contact and may inhale and ingest these microscopic plastics which can deposit throughout the body, potentially altering cellular and molecular functions in the nervous and other systems. For instance, at the cellular level, studies in animal models have shown that plastic particles can cross the blood–brain barrier and interact with neurons, and thus affect cognition. At the molecular level, plastics may specifically influence the folding of proteins, induce the formation of aberrant amyloid proteins, and therefore potentially trigger the development of systemic and local amyloidosis. In this review, we discuss the general issue of plastic micro- and nanoparticle generation, with a focus on their effects on protein folding, misfolding, and their possible clinical implications.

Incineration-Generated Polyethylene Micro-Nanoplastics Increase Triglyceride Lipolysis and Absorption in an In Vitro Small Intestinal Epithelium Model

Despite mounting evidence of micro-nanoplastics (MNPs) in food and drinking water, little is known of the potential health risks of ingested MNPs, and nothing is known of their potential impact on nutrient digestion and absorption. We assessed the effects of environmentally relevant secondary MNPs generated by incineration of polyethylene (PE-I), on digestion and absorption of fat in a high fat food model using a 3-phase in vitro simulated digestion coupled with a tri-culture small intestinal epithelium model. The presence of 400 μg/mL PE-I increased fat digestion by 33% and increased fat absorption by 147 and 145% 1 and 2 h after exposure. Analysis of the PE-I lipid corona during digestion revealed predominantly triacylglycerols with enrichment of fatty acids in the small intestinal phase. Protein corona analysis showed enrichment of triacylglycerol lipase and depletion of β-casein in the small intestinal phase. These findings suggest digestion of triacylglycerol by lipase on the surface of lipid-coated MNPs as a potential mechanism. Further studies are needed to investigate the mechanisms underlying the greater observed increase in fat absorption, to verify these results in an animal model, and to determine the MNP properties governing their effects on lipid digestion and absorption.

Absorption, distribution, metabolism, excretion and toxicity of microplastics in the human body and health implications

Microplastics (MPs; <5 mm) in the biosphere draws public concern about their potential health impacts. Humans are potentially exposed to MPs via ingestion, inhalation, and dermal contact. Ingestion and inhalation are the two major exposure pathways. An adult may consume approximately 5.1 × 10³ items from table salts and up to 4.1 × 10⁴ items via drinking water annually. Meanwhile, MP inhalation intake ranges from 0.9 × 10⁴ to 7.9 × 10⁴ items per year. The intake of MPs would be further distributed in different tissues and organs of humans depending on their sizes. The excretion has been discussed with the possible clearance ways (e.g., urine and feces). The review summarized the absorption, distribution, metabolic toxicity and excretion of MPs together with the attached chemicals. Moreover, the potential implications on humans are also discussed from in vitro and in vivo studies, and connecting the relationship between the physicochemical properties and the potential risks. This review will contribute to a better understanding of MPs as culprits and/or vectors linking to potential human health hazards, which will help outline the promising areas for further revealing the possible toxicity pathways.

Polystyrene micro and nano-particles induce metabolic rewiring in normal human colon cells: A risk factor for human health

Polystyrene is a thermoplastic polymer widely used in commercial products. Like all plastics, polystyrene can be degraded into microplastic and nanoplastic particles and ingested via food chain contamination. Although the ecological impact due to plastic contamination is well known, there are no studies indicating a carcinogenic potential of polystyrene microplastics (MPs) and nanoplastics (NPs). Here, we evaluated the effects of the MPs and NPs on normal human intestinal CCD-18Co cells. Our results show that internalization of NPs and MPs induces metabolic changes under both acute and chronic exposure by inducing oxidative stress, increasing glycolysis via lactate to sustain energy metabolism and glutamine metabolism to sustain anabolic processes. We also show that this decoupling of nutrients mirrors the effect of the potent carcinogenic agent azoxymethane and HCT15 colon cancer cells, carrying out the typical strategy of cancer cells to optimize nutrients utilization and allowing metabolic adaptation to environmental stress conditions. Taken together our data provide new evidence that chronic NPs and MPs exposure could act as cancer risk factor for human health.

Will the latest wave of the COVID‐19 pandemic be an ecological disaster? There is an urgent need to replace plastic by ecologically virtuous materials

Background and Aims

Direct virological diagnosis of Severe Acute Respiratory Syndrome CoronaVirus 2 (SARS‐CoV‐2) infectionis based on either viral antigen or viral genome detection. These methods, in addition to the dedicated reagents and transport packaging, require the use of quantities of plastic that may individually appear negligible but which, in the context of a pandemic, are very high. The aim was to estimate the amount of plastic involved in a diagnostic assay whether molecular or antigenic.

Methods

We weighed the plastics used to obtain a diagnostic assay result for SARS‐CoV‐2 infection in our hospital.

Results

Each ready‐to‐use antigen assay requires about 20 g of plastic whereas the PCR assay implies the use of 30 g. This unit mass, when compared to our laboratory's SARS‐CoV‐2 genomic screening activity,represents more than 10 tons of plastic for 2021. At our region level (#6.10 inhabitants), more than 350 tons of plastic were used to carry out more than 7 million declared PCR assays and as many antigenic assays.

Conclusions

The virologic diagnostic activityl inked to the SARS‐CoV‐2 pandemic has highlighted once more our dependance for plastic use. We must already think about a more environmentally virtuous diagnostic activity by integrating a reasonned use of diagnostic tools and a higher use of ecological friendly material. Parallel the notion of waste management must also be addressed in order to limit their environmental impact.

Uptake, Transport, and Toxicity of Pristine and Weathered Micro- and Nanoplastics in Human Placenta Cells

BACKGROUND

The first evidence of micro- and nanoplastic (MNP) exposure in the human placenta is emerging. However, the toxicokinetics and toxicity of MNPs in the placenta, specifically environmentally relevant particles, remain unclear.

OBJECTIVES

We examined the transport, uptake, and toxicity of pristine and experimentally weathered MNPs in nonsyncytialized and syncytialized BeWo b30 choriocarcinoma cells.

METHODS

We performed untargeted chemical characterization of pristine and weathered MNPs using liquid chromatography high-resolution mass spectrometry to evaluate compositional differences following particle weathering. We investigated cellular internalization of pristine and weathered polystyrene (PS; 0.05-10μm) and high-density polyethylene (HDPE; 0-80μm) particles using high-resolution confocal imaging and three-dimensional rendering. We investigated the influence of particle coating with human plasma on the cellular transport of PS particles using a transwell setup and examined the influence of acute MNP exposure on cell viability, damage to the plasma membrane, and expression of genes involved in steroidogenesis.

RESULTS

Chemical characterization of MNPs showed a significantly higher number of unique features in pristine particles in comparison with weathered particles. Size-dependent placental uptake of pristine and weathered MNPs was observed in both placental cell types after 24 h exposure. Cellular transport was limited and size-dependent and was not influenced by particle coating with human plasma. None of the MNPs affected cell viability. Damage to the plasma membrane was observed only for 0.05μm PS particles in the nonsyncytialized cells at the highest concentration tested (100μg/mL). Modest down-regulation of hsd17b1 was observed in syncytialized cells exposed to pristine MNPs.

DISCUSSION

Our results suggest that pristine and weathered MNPs are internalized and translocated in placental cells in vitro. Effects on gene expression observed upon pristine PS and HDPE particle exposure warrant further examination. More in-depth investigations are needed to better understand the potential health risks of MNP and chemicals associated with them under environmentally relevant exposure scenarios. https://doi.org/10.1289/EHP10873.

Cytotoxicity and Genotoxicity of Polystyrene Micro- and Nanoplastics with Different Size and Surface Modification in A549 Cells

Background

Micro- and nano-sized plastics (MPs and NPs) have become an environmental issue of global concern due to their small size, strong bio-permeability and high specific surface area. However, few studies have assessed the effect of polystyrene MPs and NPs on human lung cells. In this research, we evaluated the cytotoxicity and genotoxicity of polystyrene (PS) MPs and NPs with different sizes (2 μm and 80 nm) and surface modification (carboxy and amino functionalized polystyrene, pristine polystyrene) in A549 cells.

Methods

The zeta potential and hydrodynamic particle size of five types of PS plastic solutions were measured by dynamic light scattering, and their morphology and degree of aggregation were observed by scanning electron microscopy. After incubation of the PS plastics with A549 cells, the uptake and toxicity of the cells were assessed by fluorescence microscopy, laser scanning confocal microscopy, flow cytometry, MTT, micronucleus formation assay, and reactive oxygen species.

Results

The cytotoxicity and genotoxicity of A549 cells caused by nano-level PS is more serious than that of micro-level. Compared with unmodified PS-NPs, more surface-functionalized PS-NPs were found inside the cells, especially the accumulation of PS-NH₂. Cell viability and the induction of micronuclei (MN) are appreciably impacted in a dose-dependent way. Compared with pristine PS-NPs, functionalized PS-NPs showed stronger cell viability inhibitory ability, and induced more MN scores.

Conclusion

This study shows that the intrinsic size properties and surface modification of PS plastics, the interaction between PS plastics and the receiving medium, intracellular accumulation are critical factors for evaluating the toxicological influences of PS plastics on humans.

Microplastics induce immune suppression via S100A8 downregulation

Microplastic (MP) pollution has been largely reported in the daily consumption of water and food, however, the toxicities of MPs to human beings remain largely uncovered. We found that MPs in drinking water significantly impaired mouse immune function by reducing spleen weight, CD8⁺ T cell amount and raising CD4⁺ to CD8⁺ T cell ratio. We performed proteomics and phosphoproteomics by LC-MS/MS and found MPs significantly induced 130 and 57 proteins upregulated in proteome and phosphoproteome, and 191 and 37 proteins downregulated in proteome and phosphoproteome, separately. Bioinformatic analysis show that asthma, mineral absorption, and the IL-17 signaling pathway were significantly enriched and may be involved in MP-induced spleen damage and immune suppression. We verified the top 3 differentially expressed proteins and phosphoproteins by western blot, and we further showed that S100A8 was significantly downregulated by MPs via histochemistry staining. Our results revealed that MPs can induce spleen damage and immune suppression by reducing S100A8 expression, suggesting an underestimated influence and mechanism of MPs on the mammalian immune system.

Effects of Weathering on Microplastic Dispersibility and Pollutant Uptake Capacity

Microplastics are ubiquitous in the environment, leading to a new form of plastic pollution crisis, which has reached an alarming level worldwide. Micron and nanoscale plastics may get integrated into ecological cycles with detrimental effects on various ecosystems. Commodity plastics are widely considered to be chemically inert, and alterations in their surface properties due to environmental weathering are often overlooked. This lack of knowledge on the dynamic changes in the surface chemistry and properties of (micro)plastics has impeded their life-cycle analysis and prediction of their fate in the environment. Through simulated weathering experiments, we delineate the role of sunlight in modifying the physicochemical properties of microplastics. Within 10 days of accelerated weathering, microplastics become dramatically more dispersible in the water column and can more than double the surface uptake of common chemical pollutants, such as malachite green and lead ions. The study provides the basis for identifying the elusive link between the surface properties of microplastics and their fate in the environment.

Effects of polystyrene micro/nanoplastics on liver cells based on particle size, surface functionalization, concentration and exposure period

Micro/nanoplastics (MP/NP) contaminate our food and drinking water but their impact on human health has not been well-documented. The liver is one of the first organs that ingested MP/NP encounter and it has a major role in the clearance of xenobiotics. Therefore, the effects of polystyrene MP/NP on liver HepG2 cells were studied. Cellular responses to particles of various sizes (50-5000 nm) and surface functionalization (aminated, carboxylated or non-functionalized) were determined at different concentrations (0.1-100 μg/mL) and exposure periods (1-24 h). Smaller sized particles were internalized by HepG2 cells more avidly than larger particles regardless of functionalization; the highest uptake being for 50 and 100 nm aminated particles at lower concentrations. Confocal microscopy images of cells corroborated quantitative uptake results. Aminated particles were more toxic to the cells than carboxylated or non-functionalized particles. Among aminated particles smaller particles (50 and 100 nm) were more detrimental to cell viability compared to larger particles (1000 or 5000 nm) with toxicity increasing with concentration. Treatment with the particles for 4 h increased intracellular concentrations of Caspase-3 by 1.5-2.8 fold, but 24 h exposure to the particles attenuated this increase in Caspase-3 concentrations. A slight trend of higher Caspase-3 concentration in cells treated with larger particles (500-5000 nm) compared to smaller particles (50-200 nm) was observed, indicating that larger particles are more likely to direct cells toward apoptotic cell death upon 4 h exposure. Exposure of cells to large PS particles (500-5000 nm) upregulated interleukin-8 and the effect was enhanced at 24 h. Overall, the study demonstrated that smaller aminated particles were most toxic to hepatocytes, but larger particles induced apoptotic cell death or an inflammatory response depending on the length of exposure.

Bacterial cellulose biopolymers: The sustainable solution to water-polluting microplastics

Microplastics (MPs) pollution has become one of our time's most consequential issue. These micropolymeric particles are ubiquitously distributed across all natural and urban ecosystems. Current filtration systems in wastewater treatment plants (WWTPs) rely on non-biodegradable fossil-based polymeric filters whose maintenance procedures are environmentally damaging and unsustainable. Following the need to develop sustainable filtration frameworks for MPs water removal, years of R&D lead to the conception of bacterial cellulose (BC) biopolymers. These bacterial-based naturally secreted polymers display unique features for biotechnological applications, such as straightforward production, large surface areas, nanoporous structures, biodegradability, and utilitarian circularity. Diligently, techniques such as flow cytometry, scanning electron microscopy and fluorescence microscopy were used to evaluate the feasibility and characterise the removal dynamics of highly concentrated MPs-polluted water by BC biopolymers. Results show that BC biopolymers display removal efficiencies of MPs of up to 99%, maintaining high performance for several continuous cycles. The polymer's characterisation showed that MPs were both adsorbed and incorporated in the 3D nanofibrillar network. The use of more economically- and logistics-favourable dried BC biopolymers preserves their physicochemical properties while maintaining high efficiency (93-96%). These polymers exhibited exceptional structural preservation, conserving a high water uptake capacity which drives microparticle retention. In sum, this study provides clear evidence that BC biopolymers are high performing, multifaceted and genuinely sustainable/circular alternatives to synthetic water treatment MPs-removal technologies.

The exposure to polyvinyl chloride microplastics and chrysene induces multiple changes in the structure and functionality of marine meiobenthic communities

The effects of microplastics and sorbed polycyclic aromatic hydrocarbons at community levels were rarely assessed in laboratory experiments, despite their obvious advantage in reflecting better the natural conditions compared to traditionally single species-focused toxicological experiments. In the current study, the multifaceted effects of polyvinyl chloride and chrysene, acting alone or combined, on general marine meiobenthos, but with a special focus on free-living marine nematode communities were tested in a laboratory experiment carried in microcosms. The meiobenthos was exposed to two polyvinyl chloride (5 and 10 mg.kg^-1 Dry Weight 'DW') and chrysene (37.5 and 75 ng.g^-1 DW) concentrations, respectively, as well as to a mixture of both compounds, for 30 days. The results highlighted a significant decrease in the abundance of all meiobenthic generic groups, including nematodes, directly with increasing dosages of these compounds when added alone. The addition of chrysene adheres to microplastics, making the sediment matrix glueyer, hence inducing greater mortality among generic meiobenthic groups. Moreover, the nematofauna went through a strong restructuring phase following the exposure to both compounds when added alone, leading to the disappearance of sensitive nematodes and their replacement with tolerant taxa. However, the similarity in nematofauna composition between control and polyvinyl chloride and chrysene mixtures suggests that the toxicity of the latter could be attenuated by its physical bonding to the former pollutant. Other changes in the functional traits within the nematode communities were a decline in the fertility of females and an increase of the pharyngeal pumping power following exposure to both pollutants for the dominant species. The latter results were also supported by additional toxicokinetics analyses and in silico modeling.

The forgotten tonsils—does the immune active organ absorb nanoplastics?

Nanoplastics are defined as plastic particles broken down to extremely small sizes (1–100 nm) with unknown effects to the human body and immune system. Air and food exposure scenarios involving blood, lungs and intestine are considered in the literature. The fact that plastics also needs to pass the nose, oral cavity, and throat is so far ignored in the literature. The tonsils are immunologically important tissue in the oral cavity in which ingested and inhaled agents are incorporated through crypts with the capacity to capture agents and start early immunologic reactions. We argue that the tonsil is a very important tissue to study in regard to micro and nanoplastic human exposure and immunologic response. Nano-sized particles are known to be able to travel through the natural barriers and have different effects on biology compared to larger particle and the bulk material. It is therefore, although difficult, important to develop experimental methods to detect and identify nanoplastics in the tonsils. In preliminary experiments we have optimized the breakdown of tonsil tissues and tried to retrieve added polystyrene nanoparticles using density-based separation and concentration. The polystyrene was followed by FTIR spectrometry and could be detected in micro- and nano-size, in the tissue breakdown solution but not after density-based separation. When nanoplastics are incorporated in the human body, it is possible that the small plastic pieces can be detected in the tonsil tissue, in the lymph system and it is of importance for future studies to reveal the immunological effects for humans.

Widespread Occurrence of Non-Extractable Fluorine in Artificial Turfs from Stockholm, Sweden

Per- and polyfluoroalkyl substances (PFAS) are frequently used in the production of rubber and plastic, but little is known about the identity, concentration, or prevalence of PFAS in these products. In this study, a representative sample of plastic- and rubber-containing artificial turf (AT) fields from Stockholm, Sweden, was subjected to total fluorine (TF), extractable organic fluorine (EOF), and target PFAS analysis. TF was observed in all 51 AT samples (ranges of 16-313, 12-310, and 24-661 μg of F/g in backing, filling, and blades, respectively), while EOF and target PFAS occurred in <42% of all samples (<200 and <1 ng of F/g, respectively). A subset of samples extracted with water confirmed the absence of fluoride. Moreover, application of the total oxidizable precursor assay revealed negligible perfluoroalkyl acid (PFAA) formation across all three sample types, indicating that the fluorinated substances in AT are not low-molecular weight PFAA precursors. Collectively, these results point toward polymeric organofluorine (e.g., fluoroelastomer, polytetrafluoroethylene, and polyvinylidene fluoride), consistent with patent literature. The combination of poor extractability and recalcitrance toward advanced oxidation suggests that the fluorine in AT does not pose an imminent risk to users. However, concerns surrounding the production and end of life of AT, as well as the contribution of filling and blades to environmental microplastic contamination, remain.

Effects of plastic residues and microplastics on soil ecosystems: A global meta-analysis

Plastic pollution is one of the global pressing environmental problems, threatening the health of aquatic and terrestrial ecosystems. However, the influence of plastic residues and microplastics (MPs) in soil ecosystems remains unclear. We conducted a global meta-analysis to quantify the effect of plastic residues and MPs on indicators of global soil ecosystem functioning (i.e. soil physicochemical properties, plant and soil animal health, abundance and diversity of soil microorganisms). Concentrations of plastic residues and MPs were 1-2700 kg ha^-1 and 0.01-600,000 mg kg^-1, respectively, based on 6223 observations. Results show that plastic residues and MPs can decrease soil wetting front vertical and horizontal movement, dissolved organic carbon, and total nitrogen content of soil by 14%, 10%, 9%, and 7%, respectively. Plant height and root biomass were decreased by 13% and 14% in the presence of plastic residues and MPs, while the body mass and reproduction rate of soil animals decreased by 5% and 11%, respectively. However, soil enzyme activity increased by 7%441% in the presence of plastic residues and MPs. For soil microorganisms, plastic residues and MPs can change the abundance of several bacteria phyla and families, but the effects vary between different bacteria.

Identification of Trace Polystyrene Nanoplastics Down to 50 nm by the Hyphenated Method of Filtration and Surface-Enhanced Raman Spectroscopy Based on Silver Nanowire Membranes

Nanoplastics are emerging pollutants that pose potential threats to the environment and organisms. However, in-depth research on nanoplastics has been hindered by the absence of feasible and reliable analytical methods, particularly for trace nanoplastics. Herein, we propose a hyphenated method involving membrane filtration and surface-enhanced Raman spectroscopy (SERS) to analyze trace nanoplastics in water. In this method, a bifunctional Ag nanowire membrane was employed to enrich nanoplastics and enhance their Raman spectra in situ, which omitted sample transfer and avoided losing smaller nanoplastics. Good retention rates (86.7% for 50 nm and approximately 95.0% for 100-1000 nm) and high sensitivity (down to 10^-7 g/L for 50-1000 nm and up to 10⁵ SERS enhancement factor) of standard polystyrene (PS) nanoplastics were achieved using the proposed method. PS nanoplastics with concentrations from 10^-1 to 10^-7 g/L and sizes ranging from 50 to 1000 nm were successfully detected by Raman mapping. Moreover, PS micro- and nanoplastics in environmental water samples collected from the seafood market were also detected at the μg/L level. Consequently, the proposed method provides more possibilities for analyzing low-concentration nanoplastics in aquatic environments with high enrichment efficiency, minimal sample loss, and high sensitivity.

Polystyrene nanoparticles: the mechanism of their genotoxicity in human peripheral blood mononuclear cells

Plastic nanoparticles are widely spread in the biosphere, but health risk associated with their effect on the human organism has not yet been assessed. The purpose of this study was to determine the genotoxic potential of non-functionalized polystyrene nanoparticles (PS-NPs) of different diameters of 29, 44, and 72 nm in human peripheral blood mononuclear cells (PBMCs) (in vitro). To select non-cytotoxic concentrations of tested PS-NPs, we analyzed metabolic activity of PBMCs incubated with these particles in concentrations ranging from 0.001 to 1000 µg/mL. Then, PS-NPs were used in concentrations from 0.0001 to 100 μg/mL and incubated with tested cells for 24 h. Physico-chemical properties of PS-NPs in media and suspension were analyzed using dynamic light scattering (DLS), atomic force microscopy (AFM), scanning electron microscopy (SEM) and zeta potential. For the first time, we investigated the mechanism of genotoxic action of PS-NPs based on detection of single/double DNA strand-breaks and 8-oxo-2'-deoxyguanosine (8-oxodG) formation, as well as determination of oxidative modification of purines and pyrimidines and repair efficiency of DNA damage. Obtained results have shown that PS-NPs caused a decrease in PBMCs metabolic activity, increased single/double-strand break formation, oxidized purines and pyrimidines and increased 8oxodG levels. The resulting damage was completely repaired in the case of the largest PS-NPs. It was also found that extent of genotoxic changes in PBMCs depended on the size of tested particles and their ζ-potential value.

Occurrence, identification, and discharge of microplastics from effluent and sludge of the largest WWTP in Iran-South of Tehran

Microplastic pollution is a serious threat to the biota and humans, and wastewater treatment plants act as a pathway for entering microplastics into the environment. This study discusses the identification and quantification of microplastics in the south of Tehran municipal WWTP. The sampling was repeated three times in a month, overall, nine times for water samples and once a month in total, three times for digested sludge samples by steel bucket with the WPO method. The microplastics from water and digested sludge samples were identified using the micro-Raman microscope. According to this study, 98.9% of microplastic particles in effluent and 99.2% of microplastics particles in the sludge were fibers. The influent contained an average of 180 ± 4.3 MP/L and was reduced to 5.3 ± 0.31 MP/L in the final effluent. Despite this significant reduction, we calculate that this WWTP releases 2.3 × 10⁹ microplastics per day through final effluent and 1.61 × 10¹⁰ particles per day through dried sludge into the environment. We performed micro-Raman analyses and ICP mass to measure the amount of heavy metal absorption of MPs. In addition, SEM analyses were used to study the surface morphology of microplastic particles. PRACTITIONER POINTS: Fourteen different polymers were identified in the influent, effluent, and digested sludge. The main collected shapes obtained were fiber, film, and fragment, which fiber was the predominant polymer in this WWTP. The plant releases 2.3 * 10⁹ MPs per day to its downstream environment. This WWTP has average removal with an efficiency of 99.06%.

Weathering-independent differentiation of microplastic polymers by reflectance IR spectrometry and pattern recognition

The presence and effects of microplastics in the environment is being continuously studied, so the need for a reliable approach to ascertain the polymer/s constituting them has increased. To characterize them, infrared (IR) spectrometry is commonly applied, either reflectance or attenuated total reflectance (ATR). A common problem when considering field samples is their weathering and biofouling, which modify their spectra. Hence, relying on spectral matching between the unknown spectrum and spectral databases is largely defective. In this paper, the use of IR spectra combined with pattern recognition techniques (principal components analysis, classification and regression trees and support vector classification) is explored first time to identify a collection of typical polymers regardless of their ageing. Results show that it is possible to identify them using a reduced suite of spectral wavenumbers with coherent chemical meaning. The models were validated using two datasets containing artificially weathered polymers and field samples.

Insights into the impact of polyethylene microplastics on methane recovery from wastewater via bioelectrochemical anaerobic digestion

Bioelectrochemical anaerobic digestion (BEAD) is a promising next-generation technology for simultaneous wastewater treatment and bioenergy recovery. While knowledge on the inhibitory effect of emerging pollutants, such as microplastics, on the conventional wastewater anaerobic digestion processes is increasing, the impact of microplastics on the BEAD process remains unknown. This study shows that methane production decreased by 30.71% when adding 10 mg/L polyethylene microplastics (PE-MP) to the BEAD systems. The morphology of anaerobic granular sludge, which was the biocatalysts in the BEAD, changed with microbes shedding and granule crack when PE-MP existed. Additionally, the presence of PE-MP shifted the microbial communities, leading to a lower diversity but higher richness and tight clustering. Moreover, fewer fermentative bacteria, acetogens, and hydrogenotrophic methanogens (BEAD enhanced) grew under PE-MP stress, suggesting that PE-MP had an inhibitory effect on the methanogenic pathways. Furthermore, the abundance of genes relevant to extracellular electron transfer (omcB and mtrC) and methanogens (hupL and mcrA) decreased. The electron transfer efficiency reduced with extracellular cytochrome c down and a lower electron transfer system activity. Finally, phylogenetic investigation of communities by reconstruction of unobserved states analysis predicted the decrease of key methanogenic enzymes, including EC 1.1.1.1 (Alcohol dehydrogenase), EC 1.2.99.5 (Formylmethanofuran dehydrogenase), and EC 2.8.4.1 (Coenzyme-B sulfoethylthiotransferase). Altogether, these results provide insight into the inhibition mechanism of microplastics in wastewater methane recovery and further optimisation of the BEAD process.

Prenatal di-(2-ethylhexyl) phthalate exposure induced myocardial cytotoxicity via the regulation of the NRG1-dependent ErbB2/ErbB4-PI3K/AKT signaling pathway in fetal mice

Environmental sanitation of maternal contact during pregnancy is extremely important for the development of different fetal tissues and organs. In particular, during early pregnancy, any adverse exposure may cause abnormal fetal growth or inhibit the development of embryogenic organs. The potential risks of phthalate exposure, which affects the development of humans and animals, are becoming a serious concern worldwide. However, the specific molecular mechanism of di-(2-ethylhexyl) phthalate (DEHP)-induced cardiotoxicity in fetal mice remains unclear. In this study, animal models of DEHP gavage at concentrations of 250, 500, and 1000 mg/kg/day within 8.5-18.5 days of pregnancy were established. The cell proliferation, survival, and apoptosis rates were evaluated using CCK8, EdU, TUNEL and flow cytometry. The molecular mechanism was assessed via transcriptome sequencing, immunohistochemistry, immunofluorescence, reverse transcription-quantitative polymerase chain reaction, and Western blot analysis. In vivo, DEHP increased apoptosis, decreased Ki67 and CD31 expression, reduced heart weight and area, slowed down myocardial sarcomere development, and caused cardiac septal defect in fetal mice heart. Transcriptome sequencing showed that DEHP decreased NRG1 expression and downregulated the ErbB2/ErbB4-PI3K/AKT signaling pathway-related target genes. In vitro, primary cardiomyocytes were cultured with DEHP at a concentration of 150 μg/mL combined with ErbB inhibitor (AG1478, 10 μmol/L) and/or NRG1 protein (100 ng/mL) for 72 h. After DEHP intervention, the expression of NRG1 and the phosphorylation level of ErbB2, ErbB4, PI3K, and AKT decreased, and the apoptosis-related protein levels increased. Moreover, the apoptosis rate increased. After adding exogenous NRG1, the phosphorylation level of the NRG1/ERbB2/ERbB4-PI3K/AKT pathway increased, and the apoptosis-related protein levels decreased. Further, the apoptosis rate reduced. Interestingly, after exposure to DEHP and AG1478 + NRG1, the anti-apoptotic effect of NRG1 and cardiomyocyte proliferation decreased by inhibiting the NRG1/ERbB2/ERbB4-PI3K/AKT pathway. Hence, the NRG1-dependent regulation of the ERbB2/ERbB4-PI3K/AKT signaling pathway may be a key mechanism of DEHP-induced myocardial cytotoxicity.

Combined ingestion of polystyrene microplastics and epoxiconazole increases health risk to mice: Based on their synergistic bioaccumulation in vivo

Microplastic and pesticide are two common environmental pollutants whose adverse effects have been widely reported, but it is unclear whether they cause combined toxicity in mammals. In this study, polystyrene microplastics (5 µm, 0.012 or 0.120 mg/kg) or/and epoxiconazole (0.080 mg/kg) were administered orally to mice for 6 weeks, their toxicity to liver and kidney was assessed from changes in histopathology, tissue function, oxidative defense system and metabolic profile. In addition, mechanism of combined toxicity was explored in terms of bioaccumulation levels, intestinal barrier, gut microbiota. Results showed that combined ingestion of polystyrene (0.120 mg/kg) and epoxiconazole caused more severe tissue damage, dysfunction, oxidative stress, and metabolic disorders compared to single exposure sources. Interestingly, occurrence of combined toxicity was associated with their increased accumulation in tissues. In-depth exploration found that epoxiconazole caused intestinal barrier damage by targeting the gut microbiota, leading to massive invasion and accumulation of polystyrene, which in turn interfered with the metabolic clearance of epoxiconazole in liver. In all, findings highlighted that polystyrene and epoxiconazole could cause combined toxicity in mice through the synergistic effect of their bioaccumulation in vivo, which provided new reference for understanding the health risks of microplastics and pesticides and sheds light on the potential risk to humans of their combined ingestion.

Microplastics detected in cirrhotic liver tissue

Background

The contamination of ecosystem compartments by microplastics (MPs) is an ubiquitous problem. MPs have been observed in mice tissues, and recently in human blood, stool and placenta. However, two aspects remain unclear: whether MPs accumulate in peripheral organs, specifically in the liver, and if liver cirrhosis favours this process. We aimed to examine human liver tissue samples to determine whether MPs accumulate in the liver.

Methods

This proof-of-concept case series, conducted in Germany, Europe, analyzed tissue samples of 6 patients with liver cirrhosis and 5 individuals without underlying liver disease. A total of 17 samples (11 liver, 3 kidney and 3 spleen samples) were analyzed according to the final protocol. A reliable method for detection of MP particles from 4 to 30 µm in human tissue was developed. Chemical digestion of tissue samples, staining with Nile red, subsequent fluorescent microscopy and Raman spectroscopy were performed. Morphology, size and composition of MP polymers were assessed.

Findings

Considering the limit of detection, all liver, kidney and spleen samples from patients without underlying liver disease tested negative for MPs. In contrast, MP concentrations in cirrhotic liver tissues tested positive and showed significantly higher concentrations compared to liver samples of individuals without underlying liver disease. Six different microplastic polymers ranging from 4 to 30 µm in size were detected.

Interpretation

This proof-of-concept case series assessed the presence of MPs in human liver tissue and found six different MP polymers in the liver of individuals with liver cirrhosis, but not in those without underlying liver disease. Future studies are needed to evaluate whether hepatic MP accumulation represents a potential cause in the pathogenesis of fibrosis, or a consequence of cirrhosis and portal hypertension.

Funding

No funding was received for conducting this investigator driven study.

Implementing a GIS-Based Digital Atlas of Agricultural Plastics to Reduce Their Environmental Footprint: Part II, an Inductive Approach

Plastic pollution, largely perceived by the public as a major risk factor that strongly impacts sea life and preservation, has an even higher negative impact on terrestrial ecosystems. Indeed, quantitative data about plastic contamination on agricultural soils are progressively emerging in alarming ways. One of the main contributors to this pollution involves the mismanagement of agricultural plastic waste (APW), i.e., the residues from plastic material used to improve the productivity of agricultural crops, such as greenhouse covers, mulching films, irrigation pipes, etc. Wrong management of agricultural plastics during and after their working lives may pollute the agricultural soil and aquifers by releasing macro-, micro-, and nanoplastics, which could also enter into the human food chain. In this study, we aimed to develop a methodology for the spatial quantification of agricultural plastics to achieve sustainable post-consumer management. Through an inductive approach, based on statistical data from the agricultural census of the administrative areas of the Italian provinces, an agricultural plastic coefficient (APC) was proposed, implemented, and spatialized in a GIS environment, to produce a database of APW for each type of crop. The proposed methodology can be exported to other countries. It represents valuable support that could realize, in integration with other tools, an atlas of agricultural plastics, which may be a starting point to plan strategies and actions targeted to the reduction of the plastic footprint of agriculture.

Multiple anthropogenic stressors in the Galápagos Islands' complex social-ecological system: Interactions of marine pollution, fishing pressure, and climate change with management recommendations

For decades, multiple anthropogenic stressors have threatened the Galápagos Islands. Widespread marine pollution such as oil spills, persistent organic pollutants, metals, and ocean plastic pollution has been linked to concerning changes in the ecophysiology and health of Galápagos species. Simultaneously, illegal, unreported, and unregulated fishing are reshaping the composition and structure of endemic and native Galápagos pelagic communities. In this novel review, we discuss the impact of anthropogenic pollutants and their associated ecotoxicological implications for Galápagos species in the face of climate change stressors. We emphasize the importance of considering fishing pressure and marine pollution, in combination with climate-change impacts, when assessing the evolutionary fitness of species inhabiting the Galápagos. For example, the survival of endemic marine iguanas has been negatively affected by organic hydrocarbons introduced via oil spills, and endangered Galápagos sea lions exhibit detectable concentrations of DDT, triggering potential feminization effects and compromising the species' survival. During periods of ocean warming (El Niño events) when endemic species undergo nutritional stress, climate change may increase the vulnerability of these species to the impacts of pollutants, resulting in the species reaching its population tipping point. Marine plastics are emerging as a deleterious and widespread threat to endemic species. The Galápagos is treasured for its historical significance and its unparalleled living laboratory and display of evolutionary processes; however, this unique and iconic paradise will remain in jeopardy until multidisciplinary and comprehensive preventative management plans are put in place to mitigate and eliminate the effects of anthropogenic stressors facing the islands today. We present a critical analysis and synthesis of anthropogenic stressors with some progress from local and international institutional efforts and call to action more precautionary measures along with new management philosophies focused on understanding the processes of change through research to champion the conservation of the Galápagos. Integr Environ Assess Manag 2022;00:1-26. © 2022 SETAC.