Aluminyl derived ethene functionalization with heteroallenes, leading to an intramolecular ligand rearrangement

The aluminacyclopropane K[Al(NON)(η-C2H4)] ([NON]2- = [O(SiMe2NDipp)2]2-, Dipp = 2,6-iPr2C6H3) reacts with CO2 and iPrNCNiPr to afford ring-expanded products of C-C bond formation. The latter system undergoes a 1,3-silyl retro-Brook rearrangement of the NON-group, to afford the [NNO]2- ligand ([NNO]2- = [N(Dipp)SiMe2N(Dipp)SiMe2O]2-). The mechanism of transformation was examined by density functional theory (DFT).

Synthesis, reduction and C-H activation chemistry of azaborinines with redox-active organoboryl substituents

The 2,3,4,5,6-pentaphenyl-1,2-azaborinin-1-yl (PPAB) potassium complex 1 undergoes facile salt metathesis with 9,10-dibromo-9,10-dihydroboraanthracene (DBABr2), 5-bromodibenzo[b,d]borole (DBBBr), 1-chlorotetraphenylborole (TPBCl) and dibromo(phenyl)borane (BBr2Ph) to yield the corresponding N-borylated azaborinines N-DBABr-PPAB (2, which hydrolyses and dimerises to the oxo-bridged N,N'-O(DBA)2-(PPAB)2, 3), N,N'-DBA-(PPAB)2 (4), N-DBB-PPAB (5), N-PPB-PPAB (7) and N-BBrPh-PPBA (9). Stepwise reduction of 4 yields the corresponding stable radical anion 4˙- and dianion 42-. One-electron reduction of 5 with KC8 yields the purple radical anion 5˙-, which forms a highly insoluble coordination polymer. 5˙- undergoes very slow radical intramolecular ortho-C-H activation at the C4-phenyl substituent of the PPAB moiety, yielding a BN-analogue of the 5,5'-spiro-bi[dibenzoborole] anion, [6]K. Compound 7 cannot be isolated and undergoes spontaneous and diastereoselective 2,5-anti-addition of the ortho-C-H bond of the PPAB C4-phenyl substituent to yield a novel BNB-analogue of the triply fused dihydrocyclopenta[l]phenanthrene cation, compound 8. Finally the one-electron reduction of 9 results in the ortho-C-H activation of the PPAB C4-phenyl substituent at an in situ-generated dicoordinate boryl anion (10), resulting in the formation of a BNB-analogue of 9H-fluorene, the borate 11-. DFT calculations provide a rationale for the diverse C-H activations observed in these reactions.

Carbones - A Classification on the Magnetic Criterion

Carbones (carbodiphosphoranes, bent allenes and chalcogen-stabilized carbones) bear the same resonance contributor X+ -C2- -Y+ (X+ , Y+ =PR3 + , CR2 + , SR2 + , SeR2 + , S+ R2 =NR) and exhibit unique bonding and donating properties at the central carbon atom. A classification is given on basis of both the geometry and the magnetic properties (13 C chemical shift of the central carbon atom and the spatial magnetic properties, through-space NMR shieldings (TS NMRSs), actually the anisotropy effect or the ring current effect of aromatic species). TS NMRS values have been calculated using the GIAO perturbation method employing the nucleus independent chemical shift (NICS) concept and the results visualized as iso-chemical-shielding surfaces (ICSS) of various size and direction. The synergy of geometry (linear or bent, orthogonal or twisted structures) and NMR characteristics (extend of the high field shift of the central carbon atom, anisotropy effect of the allene-like C=C double bonds or the ball-like anisotropy effect of carbone-like central carbon atom) provides a comprehensive picture of the dominating resonance contributor.

Spin-Crossing in the (Z)-Selective Alkyne Semihydrogenation Mechanism Catalyzed by Mo3S4 Clusters: A Density Functional Theory Exploration

Semihydrogenation of internal alkynes catalyzed by the air-stable imidazolyl amino [Mo3S4Cl3(ImNH2)3]+ cluster selectively affords the (Z)-alkene under soft conditions in excellent yields. Experimental results suggest a sulfur-based mechanism with the formation of a dithiolene adduct through interaction of the alkyne with the bridging sulfur atoms. However, computational studies indicate that this mechanism is unable to explain the experimental outcome: mild reaction conditions, excellent selectivity toward the (Z)-isomer, and complete deuteration of the vinylic positions in the presence of CD3OD and CH3OD. An alternative mechanism that explains the experimental results is proposed. The reaction begins with the hydrogenation of two of the Mo3(μ3-S)(μ-S)3 bridging sulfurs to yield a bis(hydrosulfide) intermediate that performs two sequential hydrogen atom transfers (HAT) from the S-H groups to the alkyne. The first HAT occurs with a spin change from singlet to triplet. After the second HAT, the singlet state is recovered. Although the dithiolene adduct is more stable than the hydrosulfide species, the large energy required for the subsequent H2 addition makes the system evolve via the second alternative pathway to selectively render the (Z)-alkene with a lower overall activation barrier.

Luminescence and Excited-State Reactivity in a Heteroleptic Tricyanido Fe(III) Complex

Harnessing sunlight via photosensitizing molecules is key for novel optical applications and solar-to-chemical energy conversion. Exploiting abundant metals such as iron is attractive but becomes challenging due to typically fast nonradiative relaxation processes. In this work, we report on the luminescence and excited-state reactivity of the heteroleptic [FeIII(pzTp)(CN)3]- complex (pzTp = tetrakis(pyrazolyl)borate), which incorporates a σ-donating trispyrazolyl chelate ligand and three monodentate σ-donating and π-accepting cyanide ligands. Contrary to the nonemissive [Fe(CN)6]3-, a broad emission band centered at 600 nm at room temperature has been recorded for the heteroleptic analogue attributed to the radiative deactivation from a 2LMCT excited state with a luminescence quantum yield of 0.02% and a lifetime of 80 ps in chloroform at room temperature. Bimolecular reactivity of the 2LMCT excited state was successfully applied to different alcohol photo-oxidation, identifying a cyanide-H bonding as a key reaction intermediate. Finally, this research demonstrated the exciting potential of [Fe(pzTp)(CN)3]- as a photo-oxidant, paving the way for further exploration and development of emissive Fe-based photosensitizers competent for photochemical transformations.

Rational Design of Palladium(II) Indenyl and Allyl Complexes Bearing Phosphine and Isocyanide Ancillary Ligands with Promising Antitumor Activity

A new class of palladium-indenyl complexes characterized by the presence of one bulky alkyl isocyanide and one aryl phosphine serving as ancillary ligands has been prepared, presenting high yields and selectivity. All the new products were completely characterized using spectroscopic and spectrometric techniques (NMR, FT-IR, and HRMS), and, for most of them, it was also possible to define their solid-state structures via X-ray diffractometry, revealing that the indenyl fragment always binds to the metal centre with a hapticity intermediate between ƞ3 and ƞ5. A reactivity study carried out using piperidine as a nucleophilic agent proved that the indenyl moiety is the eligible site of attack rather than the isocyanide ligand or the metal centre. All complexes were tested as potential anticancer agents against three ovarian cancer cell lines (A2780, A2780cis, and OVCAR-5) and one breast cancer cell line (MDA-MB-231), displaying comparable activity with respect to cisplatin, which was used as a positive control. Moreover, the similar cytotoxicity observed towards A2780 and A2780cis cells (cisplatin-sensitive and cisplatin-resistant, respectively) suggests that our palladium derivatives presumably act with a mechanism of action different than that of the clinically approved platinum drugs. For comparison, we also synthesized Pd-ƞ3-allyl derivatives, which generally showed a slightly higher activity towards ovarian cancer cells and lower activity towards breast cancer cells with respect to their Pd-indenyl congeners.

Ring Walking Mediated by Ni-Ni Species as a Vehicle for Enabling Distal C(sp2)-H Functionalization of Aryl Pivalates

Herein, we report the utilization of Ni-Ni species as a manifold for enabling a "ring-walking" event by dynamic translocation of the metal center over the arene backbone. Experimental and computational studies support a translocation occurring via a 1,2-hydride shift. The synthetic applicability of the method is illustrated in a series of C-C bond formations that occur at distal C(sp2)-H sites of simple aryl pivalates.

Palladium-based pseudohomogeneous catalyst for highly selective aerobic oxidation of benzylic alcohols to aldehydes

This study presents a novel class of pseudohomogeneous catalysts (PHC) based on carbon quantum dots functionalized with terpyridine ligands (CQDs-Tpy) to immobilize and stabilize palladium nanoparticles (Pd NPs). Extensive characterization techniques clearly confirmed the successful stabilization of Pd NPs on CQDs-Tpy. The effectiveness of the catalyst was demonstrated in the selective aerobic oxidation of primary and secondary of benzylic alcohols to aldehydes in the absence of additives and phase transfer catalyst (PTC). Remarkably, the reactions predominantly yielded aldehydes without further oxidation to carboxylic acids. By employing low catalyst loadings (0.13 mol%), high conversions (up to 89%) and excellent selectivity (> 99%) of the aldehyde derivatives were achieved. Moreover, the CQDs-Tpy/Pd NPs catalyst displayed suitable catalytic activity and recyclability, offering potential economic advantages. This promising approach opens up new opportunities in the field of catalysis for designing subnanometric metal-based PHCs.

Rational design of galactopyranoside-substituted N-heterocyclic carbene palladium(ii) complexes. Stable and efficient catalyst for C-C coupling in aqueous media

Following a rational design, three novel palladium(ii) complexes bearing galactopyranoside-based N-heterocyclic carbene ligands have been synthesized via transmetalation of the corresponding Ag(i) complexes. Palladium(ii) complexes have been characterized by NMR, FT-IR and elemental analysis. Catalytic studies, using the Stille and Suzuki-Miyaura cross-coupling reactions as model C-C coupling, reveal that the complexes are active and reusable. The best results in terms of TON values were achieved in aqueous medium using either the in situ deacetylation of the catalyst or the previously deacetylated catalyst. The catalytic condition using in situ deacetylation was more efficient because it avoids an additional deprotection step.

Palladium-Based Dyotropic Rearrangement Enables A Triple Functionalization of Gem-Disubstituted Alkenes: An Unusual Fluorolactonization Reaction

We report in this paper a Pd(II)-catalyzed migratory gem-fluorolactonization of ene-carboxylic acids. Reaction of 4-methylenealkanoic acid derivatives with Selectfluor in the presence of Pd(OAc)2 (1.0 mol %) at room temperature affords fluorolactones in good to excellent yields. 2-(2-Methylenecycloalkanyl)acetic acids are transformed to bridged fluorolactones under identical conditions. One C-C, one C-O and one tertiary C-F bond were generated along the gem-disubstituted carbon-carbon double bond in this operationally simple transformation. Trapping experiments indicates that the reaction is initiated by a 5-exo-trig oxypalladation followed by Pd oxidation, regioselective ring-enlarging 1,2-alkyl/Pd(IV) dyotropic rearrangement and C-F bond forming reductive elimination cascade. Post-transformations of these fluorolactones taking advantage of the electrophilicity of the 1-fluoroalkylcarboxylate function are also documented.

Mechanochemical Scholl Reaction on Phenylated Cyclopentadiene Core: One-Step Synthesis of Fluoreno[5]helicenes

In this study, we explore feasibility of the mechanochemical approach in the synthesis of tetrabenzofluorenes (fluoreno[5]helicenes). For this, commercially available phenylated cyclopentadiene precursors are subjected to the Scholl reaction in the solid state using FeCl3 as an oxidant and sodium chloride as the solid reaction medium. This ball milling process gave access to the 5-membered ring containing-helicenes in one synthetic step in high (95-96 %) isolated yields. The solution-phase reactions, however, were found to be moderate to low yielding in this regard (10-40 %).

Laser-Assisted Structuring of Graphene Films with Biocompatible Liquid Crystal Polymer for Skin/Brain-Interfaced Electrodes

The work presented here introduces a facile strategy for the development of flexible and stretchable electrodes that harness the robust characteristics of carbon nanomaterials through laser processing techniques on a liquid crystal polymer (LCP) film. By utilizing LCP film as a biocompatible electronic substrate, control is demonstrated over the laser irradiation parameters to achieve efficient pattern generation and transfer printing processes, thereby yielding highly conductive laser-induced graphene (LIG) bioelectrodes. To enhance the resolution of the patterned LIG film, shadow masks are employed during laser scanning on the LCP film surface. This approach is compatible with surface-mounted device integration, enabling the circuit writing of LIG/LCP materials in a flexible format. Moreover, kirigami-inspired on-skin bioelectrodes are introduced that exhibit reasonable stretchability, enabling independent connections to healthcare hardware platforms for electrocardiogram (ECG) and electromyography (EMG) measurements. Additionally, a brain-interfaced LIG microelectrode array is proposed that combines mechanically compliant architectures with LCP encapsulation for stimulation and recording purposes, leveraging their advantageous structural features and superior electrochemical properties. This developed approach offers a cost-effective and scalable route for producing patterned arrays of laser-converted graphene as bioelectrodes. These bioelectrodes serve as ideal circuit-enabled flexible substrates with long-term reliability in the ionic environment of the human body.

Thermally Stable Terbium(II) and Dysprosium(II) Bis-amidinate Complexes

The thermostable four-coordinate divalent lanthanide (Ln) bis-amidinate complexes [Ln(Piso)2] (Ln = Tb, Dy; Piso = {(NDipp)2CtBu}, Dipp = C6H3iPr2-2,6) were prepared by the reduction of parent five-coordinate Ln(III) precursors [Ln(Piso)2I] (Ln = Tb, Dy) with KC8; halide abstraction of [Ln(Piso)2I] with [H(SiEt3)2][B(C6F5)] gave the respective Ln(III) complexes [Ln(Piso)2][B(C6F5)]. All complexes were characterized by X-ray diffraction, ICP-MS, elemental analysis, SQUID magnetometry, UV-vis-NIR, ATR-IR, NMR, and EPR spectroscopy and ab initio CASSCF-SO calculations. These data consistently show that [Ln(Piso)2] formally exhibit Ln(II) centers with 4fn5dz21 (Ln = Tb, n = 8; Dy, n = 9) valence electron configurations. We show that simple assignments of the f-d coupling to either L-S or J-s schemes are an oversimplification, especially in the presence of significant crystal field splitting. The coordination geometry of [Ln(Piso)2] is intermediate between square planar and tetrahedral. Projecting from the quaternary carbon atoms of the CN2 ligand backbones shows near-linear C···Ln···C arrangements. This results in strong axial ligand fields to give effective energy barriers to magnetic reversal of 1920(91) K for the Tb(II) analogue and 1964(48) K for Dy(II), the highest values observed for mononuclear Ln(II) single-molecule magnets, eclipsing 1738 K for [Tb(C5iPr5)2]. We tentatively attribute the fast zero-field magnetic relaxation for these complexes at low temperatures to transverse fields, resulting in considerable mixing of mJ states.

Synthesis and Reactivity of Aluminum Disilacyclopropenes. Cyclic AlSi2 Delocalized 2π Systems

The synthesis, structures, and reactivity of the first unsaturated AlSi2 three-membered ring systems were described. Reactions of dilithiodisilene [(NHB)LiSi═SiLi(NHB)] (1, NHB = diazaborolyl) with aluminum halides AlCl3, Ar(SiMe3)NAlCl2 (Ar = 2,6-iPr2C6H3), Cp*AlBr2 (Cp* = C5Me5), and TipAlBr2·Et2O (Tip = 2,4,6-iPr3C6H2) led to the formation of AlSi2 three-membered ring species, solvated (NHBSi)2AlCl(OEt2) (2) and solvent-free (NHBSi)2AlN(SiMe3) Ar (3), (NHBSi)2AlCp* (4), and (NHBSi)2AlTip (5), in good yields. X-ray diffraction studies and DFT calculations disclosed delocalized AlSi2 2π electron systems. Methanolysis of 4a resulted in cleavage of the Al-Si σ and Si-Si π bonds, giving trihydrodisilane (NHB)H(MeO)SiSiH2 (NHB) (6). Reaction of 4b with 4 equiv of N2O and H2C═CH2 resulted in the insertion of four oxygen atoms and four H2C═CH2 π bonds into all of the Al-Si and Si-Si bonds, yielding the O- and CH2CH2-bridged polycyclic species 7 and 8, demonstrating the synergistic reactivity of the Al-Si and Si-Si bonds in the AlSi2 ring system.

The Recent Advances in Iron-Catalyzed C(sp3 )-H Functionalization

The use of iron as a core metal in catalysis has become a research topic of interest over the last few decades. The reasons are clear. Iron is the most abundant transition metal on Earth's crust and it is widely distributed across the world. It has been extracted and processed since the dawn of civilization. All these features render iron a noncontaminant, biocompatible, nontoxic, and inexpensive metal and therefore it constitutes the perfect candidate to replace noble metals (rhodium, palladium, platinum, iridium, etc.). Moreover, direct C-H functionalization is one of the most efficient strategies by which to introduce new functional groups into small organic molecules. The majority of organic compounds contain C(sp3 )-H bonds. Given the enormous importance of organic molecules in so many aspects of existence, the utilization and bioactivity of C(sp3 )-H bonds are of the utmost importance. This review sheds light on the substrate scope, selectivity, benefits, and limitations of iron catalysts for direct C(sp3 )-H bond activations. An overview of the use of iron catalysis in C(sp3 )-H activation protocols is summarized herein up to 2022.

Synthesis of Bis(silylene) Iron Chlorides and Their Catalytic Activity for Dinitrogen Silylation

In this study, three tetracoordinated bis(silylene) iron(II) chlorides, namely, [SiCHRSi]FeCl2 (1) (R = H), (2) (R = CH3), and (3) (R = Ph), were synthesized through the reactions of the three different bis(silylene) ligands [LSiCHRSiL] (L = PhC(NtBu)2, L1 (R = H), L2 (R = CH3), L3 (R = Ph)) with FeCl2·(THF)1.5 in THF. The bis(silylene) Fe complexes 1-3 could be used as effective catalysts for dinitrogen silylation, with complex 3 demonstrating the highest turnover number (TON) of 746 equiv among the three complexes. The catalytic mechanism was explored, revealing the involvement of the pentacoordinated bis(dinitrogen) iron(0) complexes [SiCHRSi]Fe(N2)2(THF), (4)-(6), as the active catalysts in the dinitrogen silylation reaction. Additionally, the cyclic silylene compound 10 was obtained from the reaction of L1 with KC8. Single-crystal X-ray diffraction analyses confirmed the molecular structures of complexes 1-3 and 10 in the solid state.

Unlocking Heteroaromatic Ring Systems through Chalcogen Insertion into Boroles

In this work, we report the reactivity of various annulated borole derivatives toward chalcogen (O, S, and Se) insertion. Among a series of 9-borafluorenes with different boron substituents (Ph, Br, or o-carboranyl) and a mixed thiophene-benzene-fused derivative, only the 9-o-carboranyl-substituted 9-borafluorene yielded the complete set of chalcogen-containing heteroarenes, including the first 1,2-selenaborinine derivative. To evaluate the aromaticity of this heterocyclic analogue of phenanthrene, nucleus-independent chemical shift (NICS) values were computed and compared to those of its lighter group 16 congeners.

Stabilization and One Electron Reduction of a Silicon Analogue of a Carboxylic Acid Anhydride

Reaction of the 1,2-disilylenes {(DipAr Am)Si}2 (DipAr Am=[(NDip)2 CAr]- , Dip=2,6-diisopropylphenyl, Ar=4-C6 H4 But (Ar') 1 a or Ph 1 b) and two abnormal N-heterocyclic silylenes, (DipAr Am)SiOCSi{(NDip)2 CAr} (Ar=Ar' 3 a or Ph 3 b) with N2 O led to formation of unprecedented examples of uncoordinated silicon analogues of carboxylic acid anhydrides, (DipAr Am)(O=)SiOSi(=O)(DipAr Am) (Ar=Ar' 2 a or Ph 2 b). Both compounds have been fully characterized, and the mechanism of formation of one explored using DFT calculations. Reduction of sila-acid anhydride 2 a with a dimagnesium(I) compound, [{(Mes Nacnac)Mg}2 ] (Mes Nacnac=[(MesNCMe)2 CH]- , Mes=mesityl), led to the one-electron reduction of the anhydride and formation of a magnesium complex of a sila-acid anhydride radical anion [(Mes Nacnac)Mg{(OSi(DipAr' Am)}2 O] 5. A combination of EPR spectroscopic studies and DFT calculations reveal the unpaired electron to largely reside on one of the amidinate ligands of the complex.

Cyclometalated (N,C) Au(III) Complexes: The Impact of Trans Effects on Their Synthesis, Structure, and Reactivity

ConspectusThe early years of gold catalysis were dominated by Au(I) complexes and inorganic Au(III) salts. Thanks to the development of chelating ligands, more sophisticated Au(III) complexes can now be easily prepared and handled. The choice of the ancillary ligand has great consequences for the synthesis, properties, and reactivity of the Au(III) complex in question. Among the major factors controlling reactivity are the "trans effect" and the "trans influence" that a ligand imparts at the ligand trans to itself. The kinetic trans effect manifests itself with an increased labilization of the ligand trans to a given ligand and arises from an interplay between ground-state and transition-state effects. The term trans influence, on the other hand, is a ground-state effect only, describing the tendency of a given ligand to weaken the metal-ligand bond trans to itself. Herein, we will use the term "trans effect" to describe both the kinetic and the thermodynamic properties, whereas the term "trans influence" will refer only to thermodynamic properties. We will describe how these trans effects strongly impact the chemistry of the commonly encountered cyclometalated (N,C) Au(III) complexes, a class of complexes we have studied for more than a decade. We found that the outcome of reactions like alkylation, arylation, and alkynylation as well as halide metathesis are dictated by the different trans influence of the two termini of the chelating tpy ligand in (tpy)Au(OAcF)2 (tpy = 2-(p-tolyl)pyridine, OAcF = OCOCF3, tpy-C > tpy-N). There is a strong preference for high trans influence ligands to end up trans to tpy-N, whereas the lower trans influence ligands end up trans to tpy-C. Taking advantage of these preferences, tailor-made (N,C)Au(III) complexes could be prepared. For the functionalization of alkenes at (tpy)Au(OAcF)2, the higher trans effect of tpy-C would suggest that the coordination site trans to tpy-C would be kinetically more available than the one trans to tpy-N. However, due to the thermodynamic preference of having the σ-bonded ligand, resulting from the nucleophilic addition to alkenes, trans to tpy-N, functionalization of alkenes was only observed trans to tpy-N. However, for a catalytic process, the reaction should happen trans to tpy-C, as was observed for the trifluoroacetoxylation of acetylene. When functionalizing acetylene in the coordination site trans to tpy-N, protolytic cleavage of the Au-C(vinyl) bond to release the product did not occur at all, whereas trans to tpy-C protolytic cleavage of the Au-C(vinyl) bond occurred readily, in agreement with the higher trans influence of tpy-C over tpy-N. The large impact of the trans effects in Au(III) complexes is finally exemplified with the synthesis of [(tpy)Au(π-allyl)]+[NTf2]-, which resulted in a highly asymmetric π + σ bonding of the allyl moiety. Here, the bonding is such that the most thermodynamically favorable situation is achieved, with the carbon trans to tpy-N bonded in a σ-fashion and the π-allyl double bond being coordinated trans to tpy-C.

Theoretical Insight into the Special Synergy of Bimetallic Site in Co/MoC Catalyst to Promote N2 -to-NH3 Conversion

The catalytic mechanisms of nitrogen reduction reaction (NRR) on the pristine and Co/α-MoC(001) surfaces were explored by density functional theory calculations. The results show that the preferred pathway is that a direct N≡N cleavage occurs first, followed by continuous hydrogenations. The production of second NH3 molecule is identified as the rate-limiting step on both systems with kinetic barriers of 1.5 and 2.0 eV, respectively, indicating that N2 -to-NH3 transformation on bimetallic surface is more likely to occur. The two components of the bimetallic center play different roles during NRR process, in which Co atom does not directly participate in the binding of intermediates, but primarily serves as a reservoir of H atoms. This special synergy makes Co/α-MoC(001) have superior activity for ammonia synthesis. The introduction of Co not only facilitates N2 dissociation, but also accelerates the migration of H atom due to the antibonding characteristic of Co-H bond. This study offers a facile strategy for the rational design and development of efficient catalysts for ammonia synthesis and other reactions involving the hydrogenation processes.

Neutral Chromium Complex with a Cr≡Si Triple Bond: Synthesis and Photoinduced H-H and Benzene C-H Bond Activation

A neutral silylyne complex with a Cr≡Si triple bond was prepared by dehydrogenation of a chromium silylene complex with Cr-H and Si-H bonds, and was isolated as monomeric crystals, unlike dimeric forms of its tungsten and molybdenum congeners. The strong Cr(δ-)-Si(δ+) bond polarity was revealed by the reaction with MeOH and DFT calculations. The chromium silylyne complex reacted with H2 under LED (365 nm) irradiation to reproduce the precursor silylene complex with a (H)Cr=Si(H) moiety, as a result of 1,2-H-H addition across the Cr≡Si triple bond. Similarly, the chromium silylyne complex reacted with benzene under irradiation to afford an 1,2-addition product with a (H)Cr=Si(Ph) moiety, via benzene C-H bond activation accompanied by Si-C bond forming.

Reactions of Nickel(0)-Olefin Pincer Complexes with Terminal Alkynes: Cooperative C-H Bond Activation and Alkyne Coupling

Metal-ligand cooperation can facilitate the activation of chemical bonds, opening reaction pathways of interest for catalyst development. In this context, olefins occupying the central position of a diphosphine pincer ligand (PC=CP) are emerging as reversible H atom acceptors, e.g., for H2 activation. Here, we report on the reactivity of nickel complexes of PC=CP ligands with a terminal alkyne, for which two competing pathways are observed. First, cooperative and reversible C-H bond activation generates a Ni(II) alkyl/alkynyl complex as the kinetic product. Second, in the absence of a bulky substituent on the olefin, two alkyne molecules are incorporated in the ligand structure to form a conjugated triene bound to Ni(0). The mechanisms of these processes are studied by density functional theory calculations supported by experimental observations.

Palladium-Catalyzed Skeletal Rearrangement of Substituted 2-Silylaryl Triflates via 1,5-C-Pd/C-Si Bond Exchange

A palladium-catalyzed skeletal rearrangement of 2-(2-allylarylsilyl)aryl triflates has been developed to give highly fused tetrahydrophenanthrosilole derivatives via unprecedented 1,5-C-Pd/C-Si bond exchange. The reaction pathways can be switched toward 4-membered ring-forming C(sp2 )-H alkylation by tuning the reaction conditions to give completely different products, fused dihydrodibenzosilepin derivatives, from the same starting materials. The inspection of the reaction conditions revealed the importance of carboxylates in promoting the C-Pd/C-Si bond exchange.

Generation, Spectroscopic Characterization, and Computational Analysis of a Six-Coordinate Cobalt(III)-Imidyl Complex with an Unusual S = 3/2 Ground State that Promotes N-Group and Hydrogen Atom-Transfer Reactions with Exogenous Substrates

We report the synthesis and characterization of a mononuclear nonheme cobalt(III)-imidyl complex, [Co(NTs)(TQA)(OTf)]+ (1), with an S = 3/2 spin state that is capable of facilitating exogenous substrate modifications. Complex 1 was generated from the reaction of CoII(TQA)(OTf)2 with PhINTs at -20 °C. A flow setup with ESI-MS detection was used to explore the kinetics of the formation, stability, and degradation pathway of 1 in solution by treating the Co(II) precursor with PhINTs. Co K-edge XAS data revealed a distinct shift in the Co K-edge compared to the Co(II) precursor, in agreement with the formation of a Co(III) intermediate. The unusual S = 3/2 spin state was proposed based on EPR, DFT, and CASSCF calculations and Co Kβ XES results. Co K-edge XAS and IR photodissociation (IRPD) spectroscopies demonstrate that 1 is a six-coordinate species, and IRPD and resonance Raman spectroscopies are consistent with 1 being exclusively the isomer with the NT ligand occupying the vacant site trans to the TQA aliphatic amine nitrogen atom. Electronic structure calculations (broken symmetry DFT and CASSCF/NEVPT2) demonstrate an S = 3/2 oxidation state resulting from the strong antiferromagnetic coupling of an •NTs spin to the high-spin S = 2 Co(III) center. Reactivity studies of 1 with PPh3 derivatives revealed its electrophilic characteristic in the nitrene-transfer reaction. While the activation of C-H bonds by 1 was proved to be kinetically challenging, 1 could oxidize weak O-H and N-H bonds. Complex 1 is, therefore, a rare example of a Co(III)-imidyl complex capable of exogenous substrate transformations.

Multimetallic Uranium Nitride Cubane Clusters from Dinitrogen Cleavage

Dinitrogen cleavage provides an attractive but poorly studied route to the assembly of multimetallic nitride clusters. Here, we show that the monoelectron reduction of the dinitrogen complex [{U(OC6H2-But3-2,4,6)3}2(μ-η2:η2-N2)], 1, allows us to generate, for the first time, a uranium complex presenting a rare triply reduced N2 moiety ((μ-η2:η2-N2)•3-). Importantly, the bound dinitrogen can be further reduced, affording the U4N4 cubane cluster, 3, and the U6N6 edge-shared cubane cluster, 4, thus showing that (N2)•3- can be an intermediate in nitride formation. The tetranitride cluster showed high reactivity with electrophiles, yielding ammonia quantitatively upon acid addition and promoting CO cleavage to yield quantitative conversion of nitride into cyanide. These results show that dinitrogen reduction provides a versatile route for the assembly of large highly reactive nitride clusters, with U6N6 providing the first example of a molecular nitride of any metal formed from a complete cleavage of three N2 molecules.

Bis(tetrelocenes) - fusing tetrelocenes into close proximity

We report the synthesis and structure of two bis(germanocenes) and a bis(stannocene), obtained by the reaction of unsymmetric ansa bis(cyclopentadienyl) ligands with germanium and tin dichloride. DFT calculations show that the formation of these bis(tetrelocenes) is energetically favoured over the formation of the corresponding [1]tetrelocenophanes. In the crystal structure authenticated structural motif, the two tetrel(II) centers are forced into close proximity to each other, resulting in weak donor-acceptor interactions, according to Natural Bond Orbital (NBO) and Atoms in Molecules (AIM) analyses.

Tuning Ni-Pyrazolate Frameworks by Post-Synthetic Fe-Incorporation for Oxidase-Mimicking H2 O2 Activation

The introduction of iron ionic sites by metal exchange of defective homometallic nickel pyrazolate frameworks generates non-precious, Earth-abundant, first-row heterometallic Fe/Ni-pyrazolate frameworks. The Fe incorporation at the Ni nodes of the framework allows to control the hydrogen peroxide activation, minimizing its decomposition and O2 liberation, occurring at the homometallic Ni nodes. The generation of Fe-OH reactive oxygen species at the heterometallic Fe/Ni nodes is demonstrated by the higher activity in the proof-of-concept oxidation of 1-phenylethanol to acetophenone in an aqueous medium.

DFT insight into metals and ligands substitution effects on reactivity of phenoxy-imine catalysts for ethylene polymerization

The reaction mechanism of ethylene (ET) polymerization catalyzed by the phenoxy-imine (FI) ligands using DFT calculations was studied. Among five possible isomers, isomer A which has an octahedral geometry and a (cis-N/trans-O/cis-Cl) arrangement is the most stable pre-reaction Ti-FI dichloride complex. The isomer A can be activated by MAO to form the active catalyst and the active form was used for the study of the mechanism for Ti-FI. The second ethylene insertion was found to be the rate-determining step of the catalyzed ethylene polymerization. To examine the effect of group IVB transition metals (M = Ti, Zr, Hf) substitutions, calculated activation energies at the rate-determining step (EaRDS) were compared, where values of EaRDS of Zr < Hf < Ti agree with experiments. Moreover, we examined the effect of substitution on (O, X) ligands of the Ti-phenoxy-imine (Ti-1) based catalyst. The results revealed that EaRDS of (O, N) > (O, O) > (O, P) > O, S). Hence, the (O, S) ligand has the highest potential to improve the catalytic activity of the Ti-FI catalyst. We also found the activation energy to be related to the Ti-X distance. In addition, a novel Ni-based FI catalyst was investigated. The results indicated that the nickel (II) complex based on the phenoxy-imine (O, N) ligand in the square-planar geometry is more active than in the octahedral geometry. This work provides fundamental insights into the reaction mechanism of M - FI catalysts which can be used for the design and development of M - FI catalysts for ET polymerization.

NHC-Stabilized Dialanes(4) of Al2 Mes4

The synthesis and characterization of novel N-heterocyclic carbene (NHC) stabilized dialanes Al2 Mes4 as well as first investigations concerning the reactivity of these compounds are reported. The synthesis of these compounds proceeds via the mesityl-substituted alanes (NHC)⋅AlHMes2 (NHC=IMeMe {=1,3,4,5-tetramethyl-imidazolin-2-ylidene}, IiPrMe {=1,3-di-iso-propyl-4,5-dimethylimidazolin-2-ylidene}) and iodo-alanes (NHC)⋅AlIMes2 (NHC=IMeMe , IiPrMe ). Metallic reduction of (NHC)⋅AlIMes2 afforded the new NHC-stabilized dialanes (NHC)2 ⋅Al2 Mes4 (NHC=IMeMe , IiPrMe ). The NHC-ligated dialanes are thermally robust and storable synthons for the dialane Al2 Mes4 . First reactivity studies on (IMeMe )2 ⋅Al2 Mes4 towards small molecules confirm this, as this compound shows controlled and selective reactions with several substrates. Reaction with CuCl leads to oxidation of the dialane and formation of (IMeMe )⋅AlClMes2 , reactions with pyridine N-oxide and t Bu-N=C=S, respectively, gave the chalcogenide-bridged dimers {(IMeMe )⋅AlMes2 }2 -μ-E (E=O, S), and reaction with acetylene afforded the dimetallaacetylide {(IMeMe )⋅AlMes2 }2 -μ-(C≡C).

Dinitrogen cleavage by a dinuclear uranium(iii) complex

Understanding the role of multimetallic cooperativity and of alkali ion-binding in the second coordination sphere is important for the design of complexes that can promote dinitrogen (N2) cleavage and functionalization. Herein, we compare the reaction products and mechanism of N2 reduction of the previously reported K2-bound dinuclear uranium(iii) complex, [K2{[UIII(OSi(OtBu)3)3]2(μ-O)}], B, with those of the analogous dinuclear uranium(iii) complexes, [K(2.2.2-cryptand)][K{UIII(OSi(OtBu)3)3}2(μ-O)], 1, and [K(2.2.2-cryptand)]2[{UIII(OSi(OtBu)3)3}2(μ-O)], 2, where one or two K+ ions have been removed from the second coordination sphere by addition of 2.2.2-cryptand. In this study, we found that the complete removal of the K+ ions from the inner coordination sphere leads to an enhanced reducing ability, as confirmed by cyclic voltammetry studies, of the resulting complex 2, and yields two new species upon N2 addition, namely the U(iii)/U(iv) complex, [K(2.2.2-cryptand)][{UIII(OSi(OtBu)3)3}(μ-O){UIV(OSi(OtBu)3)3}], 3, and the N2 cleavage product, the bis-nitride, terminal-oxo complex, [K(2.2.2-cryptand)]2[{UV(OSi(OtBu)3)3}(μ-N)2{UVI(OSi(OtBu)3)2(κ-O)}], 4. We propose that the formation of these two products involves a tetranuclear uranium-N2 intermediate that can only form in the absence of coordinated alkali ions, resulting in a six-electron transfer and cleavage of N2, demonstrating the possibility of a three-electron transfer from U(iii) to N2. These results give an insight into the relationship between alkali ion binding modes, multimetallic cooperativity and reactivity, and demonstrate how these parameters can be tuned to cleave and functionalize N2.

Non-Friedländer Route to Diversely 3-Substituted Quinolines through Au(III)-Catalyzed Annulation Involving Electron-Deficient Alkynes

Gold(III)-catalyzed annulation of electron-deficient alkynes and 2-amino-arylcarbonyls provides general modular one-step access to a broad scope of quinoline products. This highly selective reaction is a useful alternative to the classic Friedländer synthesis, which requires harsh reaction conditions. In contrast, the developed method works under relatively mild PicAuCl2-catalyzed conditions and exhibits a high functional group tolerance (40 examples; yields of ≤96%). Another feature of the developed approach is a versatility toward other electron-deficient alkynes. Alkynylsulfones, alkynylcarbonyls, alkynylphosphonates, propiolonitriles, and trifluoromethylated alkynes can be used as the starting materials for the preparation of quinolines diversely substituted at position 3. On the basis of experimental data, we proposed a reaction mechanism in which gold(III) functions as a strong electrophilic activator of the C≡C bond and the carbonyl group. The synthetic potential of the presented method is additionally illustrated by practical postmodifications of the obtained compounds, including a two-step synthesis of interpirdine, a potent drug candidate.

Dipyrromethane-diphosphine: the effect of meso substituents on the formation of nickel complexes and on their performance in the transfer hydrogenation of ketones

Three dipyrromethane-diphosphine ligands containing phenyl (L1H2), ethyl (L2H2) and cyclohexyl (L3H2) groups at their meso positions and their nickel complexes were synthesized and structurally characterized. Treatment of Ph2C(C4H3N)2-1,9-(CH2PPh2)2 (L1H2) with [NiCl2(DME)] gave complex [NiCl2(κ2-P,P-L1H2)] 2a. Conversely, the analogous reactions of L2H2 and L3H2 with [NiCl2(DME)] showed a mixture of products containing both a pyrrolide nitrogen coordinated complex of type [Ni(κ4-P,N,N,P-L)] 3 without an exogenous base and a chelated complex of type 2a. In addition, all three ligands react with [NiCl2(DME)] in the presence of a strong base to give a complex of type 3. Furthermore, a novel binuclear Ni(0) complex bearing L1H2 was characterized by X-ray crystallography. Both complexes 2a and 3 (0.5 mol% of loading) catalyze the transfer hydrogenation of a series of aromatic and aliphatic ketones (20 substrates) to their corresponding secondary alcohols using iPrOH as a hydrogen source in the presence of KOH at 100 °C in 6 h. The kinetic trace of the catalytic reaction shows that the meso-phenyl substituted diphosphine coordinated nickel complexes perform better than the other two ligand coordinated nickel complexes.

Poly(imidazolyliden-yl)borato Complexes of Tungsten: Mapping Steric vs. Electronic Features of Facially Coordinating Ligands

A convenient synthesis of [HB(HImMe)3](PF6)2 (ImMe = N-methylimidazolyl) is decribed. This salt serves in situ as a precursor to the tris(imidazolylidenyl)borate Li[HB(ImMe)3] pro-ligand upon deprotonation with nBuLi. Reaction with [W(≡CC6H4Me-4)(CO)2(pic)2(Br)] (pic = 4-picoline) affords the carbyne complex [W(≡CC6H4Me-4)(CO)2{HB(ImMe)3}]. Interrogation of experimental and computational data for this compound allow a ranking of familiar tripodal and facially coordinating ligands according to steric (percentage buried volume) and electronic (νCO) properties. The reaction of [W(≡CC6H4Me-4)(CO)2{HB(ImMe)3}] with [AuCl(SMe2)] affords the heterobimetallic semi-bridging carbyne complex [WAu(μ-CC6H4Me-4)(CO)2(Cl){HB(ImMe)3}].

Aluminium and Gallium Silylimides as Nitride Sources

Terminal aluminium and gallium imides of the type K[(NON)M(NR)], bearing heteroatom substituents at R, have been synthesised via reactions of anionic aluminium(I) and gallium(I) reagents with silyl and boryl azides (NON=4,5-bis(2,6-diisopropyl-anilido)-2,7-di-tert-butyl-9,9-dimethyl-xanthene). These systems vary significantly in their lability in solution: the N(Sii Pr3 ) and N(Boryl) complexes are very labile, on account of the high basicity at nitrogen. Phenylsilylimido derivatives provide greater stabilization through the π-acceptor capabilities of the SiR3 group. K[(NON)AlN(Sit BuPh2 )] offers a workable compromise between stability and solubility, and has been completely characterized by spectroscopic, analytical and crystallographic methods. The silylimide species examined feature minimal π-bonding between the imide ligand and aluminium/gallium, with the HOMO and HOMO-1 orbitals effectively comprising orthogonal lone pairs centred at N. Reactivity-wise, both aluminium and gallium silylimides can act as viable sources of nitride, [N]3- , with systems derived from either metal reacting with CO to afford cyanide complexes. By contrast, only the gallium system K[(NON)Ga{N(SiPh3 )}] is capable of effecting a similar transformation with N2 O to yield azide, N3 - , via formal oxide/nitride metathesis. The aluminium systems instead generate RN3 via transfer of the imide fragment [RN]2- .

Yttrium Complexes with Group 13 Heterobenzene-Type Ligands

The yttrium gallabenzene complex [(1-Me-3,5-tBu2 -C5 H3 Ga)(μ-Me)Y(2,4-dtbp)] is accessible from Y(GaMe4 )3 and K(2,4-dtbp) via a tandem salt metathesis/methane elimination (2,4-dtbp=2,4-di-tert-butyl-pentadienyl). The pentadienyl ligand in [(1-Me-3,5-tBu2 -C5 H3 E)(μ-Me)Y(2,4-dtbp)] (E=Al, Ga) is easily displaced by salt metathesis with KC5 Me5 and KTpMe,Me (TpMe,Me =tris(pyrazolyl-Me2 -3,5)borato) affording [(1-Me-3,5-tBu2 -C5 H3 E)(μ-Me)Y(TpMe,Me )] and [(1-Me-3,5-tBu2 -C5 H3 E)(μ-Me)Y(C5 Me5 )]. The yttrium center in [(1-Me-3,5-tBu2 -C5 H3 E)(μ-Me)Y(2,4-dtbp)] readily forms adducts with neutral Lewis bases like 4-DMAP (4-dimethylaminopyridine), PMe3 , DMPE (1,2-bis(dimethylphosphino)ethane), and DME (1,2-dimethoxyethane). In stark contrast, addition of TMEDA (N,N,N',N'-tetramethylethylenediamine) results in methyl/pentadienyl exchange between aluminum and yttrium resulting in [(1-(2,4-dtbp)-1-Me-3,5-tBu2 -C5 H3 Al)Y(Me)(tmeda)]. The bonding features of the newly synthesized complexes are analyzed by single-crystal X-ray diffraction (SCXRD) and heteronuclear (89 Y, 31 P) NMR spectroscopy.

Germanium(II) Dithiolene Complexes

The 1 : 2 reaction of the imidazole-based dithiolate (2) with GeCl2  • dioxane in THF/TMEDA gives 3, a TMEDA-complexed dithiolene-based germylene. Compound 3 is converted to monothiolate-complexed (5) and N-heterocyclic carbene-complexed (7) germanium(II) dithiolene complexes via Lewis base ligand exchange. A bis-dithiolene-based germylene (8), involving a 3c-4e S-Ge-S bond, has also been synthesized through controlled hydrolysis of 7. The bonding nature of 3, 5, and 8 was investigated by both experimental and theoretical methods.

B-substituted group 1 phosphides: synthesis and reactivity

1-Boryl-8-phosphinonaphthalenes 1-BCy2-8-PCl2-C10H6 (1) and 1-BCy2-8-PPhCl-C10H6 (2) were prepared and used as starting materials for the synthesis of B-substituted phosphides. The reduction of 1 and 2 by Mg provided neutral compounds [1-BCy-8-PCy-C10H6]2 (3) and [1-BCy2-8-PPh-C10H6]2 (4). Compound 3 represents the dimer of phosphinoborane 1-BCy-8-PCy-C10H6 while complex 4 is a rare example of a discrete B ← P coordinated diphosphine. The reduction of 2 by Na or K in THF yielded B-substituted group 1 phosphides [Na(THF)3]+[1-BCy2-8-PPh-C10H6]- (5) and {[K(THF)2]+[1-BCy2-8-PPh-C10H6]-}∞ (6), which structurally resembled bulky group 1 phosphides. Complex 5 showed easy activation of elemental chalcogens E (E = O, S, Se) to give B-substituted chalcogenophosphinites {[Na(THF)2]+[1-BCy2-8-P(E)Ph-C10H6]}2 (E = O (7), S (8), Se (9)) as the products of chalcogen insertion into the P-Na bond. Importantly no oxidation to dichalcogenophosphinates was observed. Compound 5 is tolerant of the CO polar bonds in organic substrates and the reactions of 5 with 2,3-butanedione or an acyl chloride provided {[Na(THF)2]+[1-BCy2-8-P{CHC(O)C(Me)O}Ph-C10H6]-}2 (10) and [1-BCy2-8-P{C(O)tBu}Ph-C10H6] (11). Finally, B-coordinated phosphatetrylenes [1-BCy2-8-P(SnL)Ph-C10H6] (12) and [1-BCy2-8-P(PbL)Ph-C10H6] (13) (L is {2,6-(Me2NCH2)C6H3}-) were also prepared by substitution reactions of 5.

C-H Bond Activation by an Antimony(V) Oxo Intermediate Accessed through Electrochemical Oxidation of Antimony(III) Tetrakis(thiocyano)corrole

A new class of antimony(III) corroles has been described. The photophysical properties of these newly synthesized tetrakis(thiocyano)corrolatoantimony(III) derivatives having four SCN groups on the bipyrrole unit of corrole are drastically altered compared to their β-unsubstituted corrolatoantimony(III) analogues. The UV-vis and emission spectra of tetrakis(thiocyano)corrolatoantimony(III) derivatives are significantly red-shifted (roughly 30-40 nm) in comparison with their β-unsubstituted corrolatoantimony(III) derivatives. The Q bands are significantly strengthened. The intensity of the most prominent Q band is roughly 70% that of the Soret band and absorbs strongly at the far-red region, i.e., at 700-720 nm. These molecules emit light in the near-infrared region (700-900 nm). Tetrakis(thiocyano)corrolatoantimony(III) undergoes electrochemical anodic oxidation to form SbV═O species, which facilitates electrocatalytic oxygen evolution reaction (OER) and the activation of benzylic C-H to produce benzoic acid selectively. Under optimized conditions, SbIII-corrole@NF (NF = nickel foam) required an overpotential of 380 mV to reach a 50 mA cm-2 current density, comparable with those of other transition-metal-based complexes. On the other hand, replacing the anodic OER with benzyl alcohol oxidation lowered the required potential by 150 mV (at 300 mA cm-2) to improve the energy efficiency of the electrochemical process.

Structures, Bonding Analyses and Reactivity of a Dicationic Digallene and Diindene Mimicking trans-bent Ditetrylenes

The reaction of bisdicyclohexylphosphinoethane (dcpe) and the subvalent MI sources [MI (PhF)2 ][pf] (M=Ga+ , In+ ; [pf]- =[Al(ORF )4 ]- ; RF =C(CF3 )3 ) yielded the salts [{M(dcpe)}2 ][pf]2 , containing the first dicationic, trans-bent digallene and diindene structures reported so far. The non-classical MI ⇆MI double bonds are surprisingly short and display a ditetrylene-like structure. The bonding situation was extensively analyzed by quantum chemical calculations, QTAIM (Quantum Theory of Atoms in Molecules) and EDA-NOCV (Energy Decomposition Analysis with the combination of Natural Orbitals for Chemical Valence) analyses and is compared to that in the isoelectronic and isostructural, but neutral digermenes and distannenes. The dissolved [{Ga(dcpe)}2 ]2+ ([pf]- )2 readily reacts with 1-hexene, cyclooctyne, diphenyldisulfide, diphenylphosphine and under mild conditions at room temperature. This reactivity is analyzed and rationalized.

Bond-Forming Processes Enabled by Silicon-Masked Aryl- and Alkyl-Substituted Diazenes

Aryl- and alkyldiimides (R-N═NH with R = aryl or alkyl) are elusive intermediates of valuable synthetic use, as they are assumed to be transient species in processes involving both carbon (with concomitant loss of N2) and nitrogen nucleophiles (with conservation of the N═N moiety). The actual compounds are fragile and as such not bench stable which is why they have not yet found the attention they deserve. Conversely, early contributions showed that the stability of the parent diimide is significantly increased by replacing the hydrogen atom by a silyl group, but the synthetic applicability of these silicon-protected aryl- and alkyldiazenes has been far less explored, in part due to the absence of general procedures for their preparation. This Perspective provides an overview of the underexplored diazene chemistry that has witnessed considerable progress in recent years and highlights the potential of this motif in a range of synthetically useful (catalytic) transformations. The rediscovered silicon-masked diazenes constitute a versatile platform possessing enhanced stability and tamed reactivity in comparison to the parent hydrogen-substituted diimides. Aryl, diazenyl, and alkyl anionic key intermediates can be selectively generated in situ under Lewis base or transition metal catalysis, giving rise to novel synthetic approaches as viable alternatives to the already existing methodologies.

2-Hydroxypyridine-based Ligands as Promoter in Ruthenium(II) Catalyzed C-H Bond Activation/Arylation Reactions

A class of 2-hydroxypyridine based ligands are explored to achieve enhanced catalytic activity for ortho-C-H bond activation/arylation reaction over [(η6 -p-cymene)RuCl2 ]2 catalyst in water. Extensive studies using a series of substituted 2-hydroxypyridine based ligands (L1-L6) inferred that 5-trifluoromethyl-2-hydroxypyridine (L6) exhibited favorable effects to enhance the catalytic activity of Ru(II) catalyst for ortho C-H bond arylation of 2-phenylpyridine by 8 folds compared to those performed without ligands. The (η6 -p-cymene)Ru - L6 system also exhibited enhanced catalytic activity for ortho C-H bond arylation of 2-phenylpyridine using a variety of aryl halides. NMR and mass investigations inferred the presence of several ligand coordinated Ru(II) species, suggesting the involvement of these species in C-H bond activation reaction. Further in concurrence with the experimental findings, the density functional theory (DFT) calculations also evidenced the prominent role of 2-hydroxypyridine based ligands in Ru(II) catalyzed C-H bond arylation of 2-phenylpyridine with lower energy barrier for the C-H activation step.

Unlocking the Chain-Walking Process in Gold Catalysis

The successful realization of gold-catalyzed chain-walking reactions, facilitated by ligand-enabled Au(I)/Au(III) redox catalysis, has been reported for the first time. This breakthrough has led to the development of gold-catalyzed annulation reaction of alkenes with iodoarenes by leveraging the interplay of chain-walking and π-activation reactivity mode. The reaction mechanism has been elucidated through comprehensive experimental and computational studies.

Thallium(I) Complexes of Tris(pyridyl)borates and a Comparison to Their Pyrazolyl Analogues

Thallium(I) complexes of B-methylated and B-phenylated tris(pyridyl)borates featuring trifluoromethyl groups at the pyridyl ring 6-positions have been synthesized by metathesis using the corresponding potassium salts [MeB(6-(CF3)Py)3]K and [PhB(6-(CF3)Py)3]K with thallium(I) acetate. The closely related tris(pyrazolyl)borate analogue [PhB(3-(CF3)Pz)3]Tl has also been prepared, and comparisons of structural and spectroscopic features between the two scorpionate families are presented. [MeB(6-(CF3)Py)3]Tl displays κ3-coordination of the tris(pyridyl)borate similar to that of tris(pyrazolyl)borate in [MeB(3-(CF3)Pz)3]Tl, while [PhB(6-(CF3)Py)3]Tl and [PhB(3-(CF3)Pz)3]Tl feature κ2-N,N ligand coordination modes with the B-phenyl groups flanking the thallium sites. 19F NMR spectroscopy of [MeB(6-(CF3)Py)3]Tl reveals the presence of a remarkably large 1208 Hz four-bond thallium-fluorine coupling constant in chloroform at room temperature, which is considerably larger than 878 Hz observed for the pyrazolyl borate analogue [MeB(3-(CF3)Pz)3]Tl. Although [PhB(6-(CF3)Py)3]Tl is structurally nonrigid at room temperature in chloroform, at lower temperatures, the ligand arm exchange slows down, revealing 4JTl-F = 1110 Hz. Steric demands of these ligands have been quantified using the buried volume concept. In addition, ligand transfer chemistry from [MeB(6-(CF3)Py)3]Tl and [PhB(6-(CF3)Py)3]Tl to copper(I) under ethylene and computational analyses of the various coordination modes of tris(pyrazolyl)borates and tris(pyridyl)borates are reported.

Syntheses and Characterizations of Hetero-Bimetallic Chromium-Dinitrogen Transition-Metal Complexes

In the domain of N2 activation, hetero-bimetallic dinitrogen complexes are garnering substantial interest due to their potential to induce polarization in nonpolar N2 gas. Herein, we present the syntheses and characterizations of three novel hetero-multimetallic dinitrogen complexes: Cp*Cr(depe)N2V(depe)Me[O, P, O] 5, Cp*Cr(depe)N2V(depe)Tipp[O, P, O] 6, and [Cp*Cr(depe)N2]2TiTipp[O, P, O] 7. These complexes were synthesized via a transmetalation process involving the treatment of [Cr0-N2]- complex 4 with vanadium and titanium chloride complexes bearing alkyl or aryl substituted bis(o-hydroxyphenyl)-phenyl phosphine R[O, P, O] ligand (alkyl = methyl, aryl = 2,4,6-tri-isopropylbenzene). X-ray analysis shows that complexes 5 and 6 exhibit heterodinuclear structures, while complex 7 exhibits a heterotrinuclear core with two N2 ligands concurrently coordinated to two chromium and one titanium atoms. Raman spectroscopic data show that the N-N stretching vibration of the N2 moiety is clearly downshifted relative to free N2 and to mononuclear [Cr0-N2]- complex 4.

Boron Insertion into the N≡N Bond of a Tungsten Dinitrogen Complex

The 1,3-addition of 1,2-diaryl-1,2-dibromodiboranes (B2Br2Ar2) to trans-[W(N2)2(dppe)2] (dppe = κ2-(Ph2PCH2)2), which is accompanied by a Br-Ar substituent exchange between the two boron atoms, is followed by a spontaneous rearrangement of the resulting tungsten diboranyldiazenido complex to a 2-aza-1,3-diboraallenylimido complex displaying a linear, cumulenic B=N=B moiety. This rearrangement involves the splitting of both the B-B and N=N bonds of the N2B2 ligand, formal insertion of a BAr boranediyl moiety into the N=N bond, and coordination of the remaining BArBr boryl moiety to the terminal nitrogen atom. Density functional theory calculations show that the reaction proceeds via a cyclic NB2 intermediate, followed by dissociation into a tungsten nitrido complex and a linear boryliminoborane, which recombine by adduct formation between the nitrido ligand and the electron-deficient iminoborane boron atom. The linear B=N=B moiety also undergoes facile 1,2-addition of Brønsted acids (HY = HOPh, HSPh, and H2NPh) with concomitant Y-Br substituent exchange at the terminal boron atom, yielding cationic (borylamino)borylimido tungsten complexes.

Dinitrogen Activation and Functionalization Affording Chromium Diazenido and Hydrazido Complexes

ConspectusThe activation and functionalization of N2 to form nitrogen-element bonds have long posed challenges to industrial, biological, and synthetic chemists. The first transition-metal dinitrogen complex prepared by Allen and Senoff in 1965 provoked researchers to explore homogeneous N2 fixation. Despite intensive research in the last six decades, efficient and quantitative conversion of N2 to diazenido and hydrazido species remains problematic. Relative to a plethora of reactions to generate N2 complexes, their functionalization reactions are rather rare, and the yields are often unsatisfactory, emphasizing the need for systematic investigations of the reaction mechanisms.In this Account, we summarize our recent work on the synthesis, spectroscopic features, electronic structures, and reactivities of several Cr-N2 complexes. Initially, a series of dinuclear and trinuclear Cr(I)-N2 complexes bearing cyclopentadienyl-phosphine ligands were accessed. However, they cannot achieve N2 functionalization but undergo oxidative addition reactions with phenylsilane, azobenzene, and other unsaturated organic compounds at the low-valent Cr(I) centers rather than at the N2 unit. Further reduction of these Cr(I) complexes leads to the formation of more activated mononuclear Cr(0) bis-dinitrogen complexes. Remarkably, silylation of the cyclopentadienyl-phosphine Cr(0)-N2 complex with Me3SiCl afforded the first Cr hydrazido complex. This process follows the distal pathway to functionalize the Nβ atom twice, yielding an end-on η1-hydrazido complex, Cr(III)═N-N(SiMe3)2. In contrast, upon substitution of the phosphine ligand in the Cr(0)-N2 complex with a N-heterocyclic carbene (NHC) ligand, the corresponding reaction with Me3SiCl proceeds via the alternating pathway; the silylation occurs at both Nα and Nβ atoms and generates a side-on η2-hydrazido complex, Cr(III)(η2-Me3SiN-NSiMe3). Both silylation reactions are inevitably accompanied by the formation of Cr(III) hydrazido complexes and Cr(II) chlorides with a 2:1 ratio. These processes exhibit a peculiar '3-4-2-1' stoichiometry (i.e., treating 3 equiv of Cr(0)-N2 complexes with 4 equiv of Me3SiCl yields 2 equiv of Cr(III) disilyl-hydrazido complexes and 1 equiv of Cr(II) chloride). Upon replacing the monodentate phosphine and/or NHC ligand with a bisphosphine ligand, a monodinitrogen Cr(0) complex, instead of the bis-dinitrogen Cr(0) complexes, is obtained; consequently, the silylation reactions progress via the normal two-electron route, which passes through Cr(II)-N═N-R diazenido species as an intermediate and furnishes [Cr(IV)═N-NR2]+ hydrazido as the final products. More importantly, this type of Cr(0)-N2 complex can be not only silylated but also protonated and alkylated proficiently. All of the second-order reaction rates of the first and second transformations are determined along with the lifetimes of the intervening diazenido species. Based on these findings, we have successfully carried out nearly quantitative preparations of the Cr(IV) hydrazido species with unmixed or hybrid substituents.The studies of Cr-N2 systems provide effective approaches for the activation and functionalization of N2, deepening the understanding of N2 electrophilic attack. We hope that this Account will inspire more discoveries related to the transformation of gaseous N2 to high-value-added nitrogen-containing organic compounds.

Poly-3-hydroxybutyrate production from acetate by recombinant Pseudomonas stutzeri with blocked L-leucine catabolism and enhanced growth in acetate

Acetate is a low-cost feedstock for the production of different bio-chemicals. Electrochemical reduction of CO2 into acetate and subsequent acetate fermentation is a promising method for transforming CO2 into value-added chemicals. However, the significant inhibitory effect of acetate on microbial growth remains a barrier for acetate-based biorefinery. In this study, the deletion of genes involved in L-leucine degradation was found to be beneficial for the growth of Pseudomonas stutzeri A1501 in acetate. P. stutzeri (Δpst_3217), in which the hydroxymethylglutaryl-CoA lyase catalyzing β-hydroxy-β-methylglutaryl-CoA into acetyl-CoA and acetoacetate was deleted, grew faster than other mutants and exhibited increased tolerance to acetate. Then, the genes phbCAB from Ralstonia eutropha H16 for poly-3-hydroxybutyrate (PHB) biosynthesis were overexpressed in P. stutzeri (∆pst_3217) and the recombinant strain P. stutzeri (∆pst_3217-phbCAB) can accumulate 0.11 g L-1 PHB from commercial acetate. Importantly, P. stutzeri (∆pst_3217-phbCAB) can also use CO2-derived acetate to produce PHB and the accumulated PHB accounted for 5.42% (w/w) of dried cell weight of P. stutzeri (∆pst_3217-phbCAB).

Non-isocyanate polyurethanes synthesized from terpenes using thiourea organocatalysis and thiol-ene-chemistry

The depletion of fossil resources as well as environmental concerns contribute to an increasing focus on finding more sustainable approaches for the synthesis of polymeric materials. In this work, a synthesis route towards non-isocyanate polyurethanes (NIPUs) using renewable starting materials is presented. Based on the terpenes limonene and carvone as renewable resources, five-membered cyclic carbonates are synthesized and ring-opened with allylamine, using thiourea compounds as benign and efficient organocatalysts. Thus, five renewable AA monomers are obtained, bearing one or two urethane units. Taking advantage of the terminal double bonds of these AA monomers, step-growth thiol-ene polymerization is performed using different dithiols, to yield NIPUs with molecular weights of above 10 kDa under mild conditions. Variation of the dithiol and amine leads to polymers with different properties, with Mn of up to 31 kDa and Tg's ranging from 1 to 29 °C.

Organomediated electrochemical fluorosulfonylation of aryl triflates via selective C-O bond cleavage

Although aryl triflates are essential building blocks in organic synthesis, the applications as aryl radical precursors are limited. Herein, we report an organomediated electrochemical strategy for the generation of aryl radicals from aryl triflates, providing a useful method for the synthesis of aryl sulfonyl fluorides from feedstock phenol derivatives under very mild conditions. Mechanistic studies indicate that key to success is to use catalytic amounts of 9, 10-dicyanoanthracene as an organic mediator, enabling to selectively active aryl triflates to form aryl radicals via orbital-symmetry-matching electron transfer, realizing the anticipated C-O bond cleavage by overcoming the competitive S-O bond cleavage. The transition-metal-catalyst-free protocol shows good functional group tolerance, and may overcome the shortages of known methods for aryl sulfonyl fluoride synthesis. Furthermore, this method has been used for the modification and formal synthesis of bioactive molecules or tetraphenylethylene (TPE) derivative with improved quantum yield of fluorescence.

Synthesis of inventive biphenyl and azabiphenyl derivatives as potential insecticidal agents against the cotton leafworm, Spodoptera littoralis

The emergence of pest resistance of Spodoptera littoralis (order; Lepidoptera, family; Noctuidae) towards the large scale of different classes of insecticides necessitates the development of some new poly-functionalized biphenyl and azabiphenyl with highly anticipated insecticidal bioresponse. Four new biphenyl carboxamidines 4a-d and four aza-analogue picolinamidine derivatives 8a-d were designed and prepared via the treatment of their corresponding carbonitriles with lithium-bis trimethylsilylamide [LiN(TMS)2], followed by hydrolysis with hydrogen chloride. Furthermore, these compounds were elucidated by spectral data, and their toxicity and insecticidal activity were screened against Spodoptera littoralis. Whereby, toxicological and biochemical aspects of the inventively synthesized biphenyl and azabiphenyl derivatives against the cotton leafworm, Spodoptera littoralis were inspected. As regards the indomitable LC50 and LC90 values, biphenyl and aza-analogues 8d, 8a, 4b, and 8b, revealed the furthermost forceful toxic effects with LC50 values of 113.860, 146.265, 216.624, and 289.879 ppm, respectively. Whereby, their LC90 values are 1235.108, 1679.044, 2656.296, and 3381.256 ppm, respectively, and toxicity index being 22.31%, 17.36%, 11.72%, and 8.76%, respectively, comparing with the already recommended, methomyl insecticide, lannate 90% SP (LC50, 25.396 and LC90, 57.860 and toxicity index, 100%). Additionally, electrochemical parameters via DFT studies were carried out for demonstrating and elucidation of structure-activity relationship (SAR) according to highly motived compounds, descriptors, and the in vivo insecticidal activities.