Thermodynamics versus Kinetics in Nanosynthesis

Realization of Single-Crystal Dye Lasers by Taming Charge Transfer in Molecular Self-Assemblies

The large library of organic dye molecules offers almost infinite possibilities for laser design, but still faces a great challenge in achieving pure dye aggregate lasers due to intermolecular quenching. Here, we report a kinetically controlled molecular self-assembly strategy to synthesize unconventional dye microcrystals for lasing. By increasing temperature, the dye self-assembly is transformed from thermodynamic to kinetic control. Unlike the thermodynamic microcrystal products incapable of lasing due to intermolecular charge-transfer-mediated excimer formation, the kinetic dye microcrystals have large intermolecular distances and weak intermolecular interactions, supporting highly efficient intramolecular charge-transfer monomer emission and low-threshold lasing. This work demonstrates single-crystal dye lasers, promising to unleash the full potential of laser dyes in solid-state lasers.

Cellulose nanofiber assisted dispersion of hydrophobic SiO2 nanoparticles in water and its superhydrophobic coating

It is challenging to build a superhydrophobic coating with aqueous dispersions since hydrophobic substances are usually dispersed in pure organic or water/organic mixed solvents. In this study, hydrophobic SiO₂ nanoparticles were dispersed in water assisted with cellulose nanofiber (CNF) and the superhydrophobic surface was manufactured by coating a waterborne dispersion composed of CNF, hydrophobic SiO₂ nanoparticles and methyltrimethoxysilane (MTMS). It was found that the dispersion of SiO₂ in water can be improved by CNF. Meanwhile, the coated paper surface retained its hydrophobicity after 10 abrasion cycles due to the adhesion of the coating surface promoted by MTMS. When SiO₂ content over 0.25 wt%, the coated paper surface displayed a superhydrophobic property, and the moisture absorption decreased to 31-34%. The contact angle of the coating surface was 162°, the contact angle hysteresis was 1.96° and the rolling contact angle was 1.33° when SiO₂ content was 1 wt%.

Versatile synthesis of dendritic mesoporous rare earth-based nanoparticles

Rare earth-based nanomaterials that have abundant optical, magnetic, and catalytic characteristics have many applications. The controllable introduction of mesoporous channels can further enhance its performance, such as exposing more active sites of rare earth and improving the loading capacity, yet remains a challenge. Here, we report a universal viscosity-mediated assembly strategy and successfully endowed rare earth-based nanoparticles with central divergent dendritic mesopores. More than 40 kinds of dendritic mesoporous rare earth-based (DM-REX) nanoparticles with desired composition (single or multiple rare earth elements, high-entropy compounds, etc.), particle diameter (80 to 500 nanometers), pore size (3 to 20 nanometers), phase (amorphous hydroxides, crystalline oxides, and fluorides), and architecture were synthesized. Theoretically, a DM-REX nanoparticle library with 393,213 kinds of possible combinations can be constructed on the basis of this versatile method, which provides a very broad platform for the application of rare earth-based nanomaterials with rational designed functions and structures.

Dispersive 2D Triptycene-Based Crystalline Polymers: Influence of Regioisomerism on Crystallinity and Morphology

The merging of good crystallinity and high dispersibility into two-dimensional (2D) layered crystalline polymers (CPs) still represents a challenge because a high crystallinity is often accompanied by intimate interlayer interactions that are detrimental to the material processibility. We herein report a strategy to address this dilemma using rationally designed three-dimensional (3D) monomers and regioisomerism-based morphology control. The as-synthesized CPs possess layered 2D structures, where the assembly of layers is stabilized by relatively weak van der Waals interactions between C-H bonds other than the usual π-π stackings. The morphology and dispersibility of the CPs are finely tuned via regioisomerism. These findings shed light on how to modulate the crystallinity, morphology, and ultimate function of crystalline polymers using the spatial arrangements of linking groups.

Alkynyl ligands-induced growth of ultrathin nanowires arrays

Ligands are almost essential in the synthesis of nanostructures. In this work, we introduce the alkynyl ligands into the synthesis of ultrathin gold (Au) nanowires arrays. The strong binding affinity of the alkynyl ligands enables one-dimensional (1D) growth via the active surface growth mechanism. The scope of the ligand generality was systematically investigated, and the alkynyl ligand-induced nanowire growth processes were compared and contrasted with those involving thiolated ligands. While strong ligands are usually difficult to dissociate from the nanostructure surface and therefore problematic for post-synthetic processing, the alkynyl ligands are readily dissociable, making the alkynyl ligand-stabilized Au nanowires potentially more modifiable and applicable. As a demonstration, direct palladium (Pd) deposition on the Au nanowires was successfully carried out without any ligand exchange process.

Opportunities and Challenges for Alternative Nanoplasmonic Metals: Magnesium and Beyond

Materials that sustain localized surface plasmon resonances have a broad technology potential as attractive platforms for surface-enhanced spectroscopies, chemical and biological sensing, light-driven catalysis, hyperthermal cancer therapy, waveguides, and so on. Most plasmonic nanoparticles studied to date are composed of either Ag or Au, for which a vast array of synthetic approaches are available, leading to controllable size and shape. However, recently, alternative materials capable of generating plasmonically enhanced light-matter interactions have gained prominence, notably Cu, Al, In, and Mg. In this Perspective, we give an overview of the attributes of plasmonic nanostructures that lead to their potential use and how their performance is dictated by the choice of plasmonic material, emphasizing the similarities and differences between traditional and emerging plasmonic compositions. First, we discuss the materials limitation encapsulated by the dielectric function. Then, we evaluate how size and shape maneuver localized surface plasmon resonance (LSPR) energy and field distribution and address how this impacts applications. Next, biocompatibility, reactivity, and cost, all key differences underlying the potential of non-noble metals, are highlighted. We find that metals beyond Ag and Au are of competitive plasmonic quality. We argue that by thinking outside of the box, i.e., by looking at nonconventional materials such as Mg, one can broaden the frequency range and, more importantly, combine the plasmonic response with other properties essential for the implementation of plasmonic technologies.

Directing the Architecture of Surface-Clean Cu2O for CO Electroreduction

Tailoring the morphology of nanocrystals is a promising way to enhance their catalytic performance. In most previous shape-controlled synthesis strategies, surfactants are inevitable due to their capability to stabilize different facets. However, the adsorbed surfactants block the intrinsic active sites of the nanocrystals, reducing their catalytic performance. For now, strategies to control the morphology without surfactants are still limited but necessary. Herein, a facile surfactant-free synthesis method is developed to regulate the morphology of Cu₂O nanocrystals (e.g., solid nanocube, concave nanocube, cubic framework, branching nanocube, branching concave nanocube, and branching cubic framework) to enhance the electrocatalytic performance for the conversion of CO to n-propanol. Specifically, the Cu₂O branching cubic framework (BCF-Cu₂O), which is difficult to fabricate using previous surfactant-free methods, is fabricated by combining the concentration depletion effect and the oxidation etching process. More significantly, the BCF-Cu₂O-derived catalyst (BCF) presents the highest n-propanol current density (-0.85 mA cm^-2) at -0.45 V versus the reversible hydrogen electrode (V_RHE), which is fivefold higher than that of the surfactant-coated Cu₂O nanocube-derived catalyst (SFC, -0.17 mA cm^-2). In terms of the n-propanol Faradaic efficiency in CO electroreduction, that of the BCF exhibits a 41% increase at -0.45 V_RHE as compared with SFC. The high catalytic activity of the BCF that results from the clean surface and the coexistence of Cu(100) and Cu(110) in the lattice is well-supported by density functional theory calculations. Thus, this work presents an important paradigm for the facile fabrication of surface-clean nanocrystals with an enhanced application performance.

Nanoparticle cluster formation mechanisms elucidated via Markov state modeling: Attraction range effects, aggregation pathways, and counterintuitive transition rates

Nanoparticle clusters are promising candidates for developing functional materials. However, it is still a challenging task to fabricate them in a predictable and controllable way, which requires investigation of the possible mechanisms underlying cluster formation at the nanoscale. By constructing Markov state models (MSMs) at the microstate level, we find that for highly dispersed particles to form a highly aggregated cluster, there are multiple coexisting pathways, which correspond to direct aggregation, or pathways that need to pass through partially aggregated, intermediate states. Varying the range of attraction between nanoparticles is found to significantly affect pathways. As the attraction range becomes narrower, compared to direct aggregation, some pathways that need to pass through partially aggregated intermediate states become more competitive. In addition, from MSMs constructed at the macrostate level, the aggregation rate is found to be counterintuitively lower with a lower free-energy barrier, which is also discussed.

Synthetic Approaches to Colloidal Nanocrystal Heterostructures Based on Metal and Metal-Oxide Materials

Composite inorganic nanoarchitectures, based on combinations of distinct materials, represent advanced solid-state constructs, where coexistence and synergistic interactions among nonhomologous optical, magnetic, chemical, and catalytic properties lay a basis for the engineering of enhanced or even unconventional functionalities. Such systems thus hold relevance for both theoretical and applied nanotechnology-based research in diverse areas, spanning optics, electronics, energy management, (photo)catalysis, biomedicine, and environmental remediation. Wet-chemical colloidal synthetic techniques have now been refined to the point of allowing the fabrication of solution free-standing and easily processable multicomponent nanocrystals with sophisticated modular heterostructure, built upon a programmed spatial distribution of the crystal phase, composition, and anchored surface moieties. Such last-generation breeds of nanocrystals are thus composed of nanoscale domains of different materials, assembled controllably into core/shell or heteromer-type configurations through bonding epitaxial heterojunctions. This review offers a critical overview of achievements made in the design and synthetic elaboration of colloidal nanocrystal heterostructures based on diverse associations of transition metals (with emphasis on plasmonic metals) and transition-metal oxides. Synthetic strategies, all leveraging on the basic seed-mediated approach, are described and discussed with reference to the most credited mechanisms underpinning regioselective heteroepitaxial deposition. The unique properties and advanced applications allowed by such brand-new nanomaterials are also mentioned.

Core-Shell Structured Micro-Nanomotors: Construction, Shell Functionalization, Applications, and Perspectives

The successful integration of well-designed micro-nanomotors (MNMs) with diverse functional systems, such as, living systems, remote actuation systems, intelligent sensors, and sensing systems, offers many opportunities to not only endow them with diverse functionalization interfaces but also bring augmented or new properties in a wide variety of applications. Core-shell structured MNM systems have been considered to play an important role in a wide range of applications as they provide a platform to integrate multiple complementary components via decoration, encapsulation, or functionalization into a single functional system, being able to protect the active species from harsh environments, and bring improved propulsion performance, stability, non-toxicity, multi-functionality, and dispersibility, etc., which are not easily available from the isolated components. More importantly, the hetero-interfaces between individual components within a core-shell structure might give rise to boosted or new physiochemical properties. This review will bring together these key aspects of the core-shell structured MNMs, ranging from advanced protocols, enhanced/novel functionalities arising from diverse functional shells, to integrated core-shell structured MNMs for diverse applications. Finally, current challenges and future perspectives for the development of core-shell structured MNMs are discussed in term of synthesis, functions, propulsions, and applications.

Bimetallic Janus Nanocrystals: Syntheses and Applications

Bimetallic Janus nanocrystals have received considerable interest in recent years owing to their unique properties and niche applications. The side-by-side distribution of two distinct metals provides a flexible platform for tailoring the optical and catalytic properties of nanocrystals. First, a brief introduction to the structural features of bimetallic Janus nanocrystals, followed by an extensive discussion of the synthetic approaches, is given. The strategies and experimental controls for achieving the Janus structure, as well as the mechanistic understandings, are specifically discussed. Then, a number of intriguing properties and applications enabled by the Janus nanocrystals are highlighted. Finally, this article is concluded with future directions and outlooks with respect to both syntheses and applications of this new class of functional nanomaterials.

Understanding the evolution of tunable spiral threads in homochiral Au nano-screws

Penta-twin Au nanorods are transformed into homochiral nano-screws. A feed-back mechanism is proposed to explain the dynamic evolution of the spirals.

Insight into nanocrystal synthesis: from precursor decomposition to combustion

Nanotechnology-based synthesis of nanoscale materials has appealed to the attention of scientists in the modern scientific community. In the bottom-up approach, atoms start to aggregate/agglomerate and form nuclei within the minimum and maximum supersaturation range. Once nuclei are generated above the critical-free energy/radius, the growth is initiated by obeying the LaMar model with a slight extra simple growth by diffusion advancement. The in situ real-time liquid phase analysis using STEM, AFM, and XAS techniques is used to control precursor decomposition to the nanocrystal formation process and should be a non-stoppable technique. Solution combustion synthesis (SCS) is a time-/energy-efficient self-sustained process that produces mass-/ion transport active porous materials. SCS also permits the synthesis of evenly distributed-doped and hybrid-nanomaterials, which are beneficial in tuning crucial properties of the materials. The growth and development of nanocrystals, dehydrating the sol in the presence of a surfactant or/and fuel results in combustion once it arrives at the ignition temperature. Besides, the kinetic and thermodynamics controlled architecture-directing agent-assisted SCS offers colloidal nanocrystal framework formation, which is currently highly applicable for energy devices. This short review provides insightful information that adds to the existing nanocrystal synthesis process and solution combustion synthesis and recommends future directions in the field.

The LaMar model visualizes the process of nanocrystal formation. The solution combustion synthesis approach is a noble methodology resulting in highly stable and ordered porous nanomaterials.

Towards principled design of cancer nanomedicine to accelerate clinical translation

Nanotechnology in medical applications, especially in oncology as drug delivery systems, has recently shown promising results. However, although these advances have been promising in the pre-clinical stages, the clinical translation of this technology is challenging. To create drug delivery systems with increased treatment efficacy for clinical translation, the physicochemical characteristics of nanoparticles such as size, shape, elasticity (flexibility/rigidity), surface chemistry, and surface charge can be specified to optimize efficiency for a given application. Consequently, interdisciplinary researchers have focused on producing biocompatible materials, production technologies, or new formulations for efficient loading, and high stability. The effects of design parameters can be studied in vitro, in vivo, or using computational models, with the goal of understanding how they affect nanoparticle biophysics and their interactions with cells. The present review summarizes the advances and technologies in the production and design of cancer nanomedicines to achieve clinical translation and commercialization. We also highlight existing challenges and opportunities in the field.

Interfacial Assembly and Applications of Functional Mesoporous Materials

Functional mesoporous materials have gained tremendous attention due to their distinctive properties and potential applications. In recent decades, the self-assembly of micelles and framework precursors into mesostructures on the liquid-solid, liquid-liquid, and gas-liquid interface has been explored in the construction of functional mesoporous materials with diverse compositions, morphologies, mesostructures, and pore sizes. Compared with the one-phase solution synthetic approach, the introduction of a two-phase interface in the synthetic system changes self-assembly behaviors between micelles and framework species, leading to the possibility for the on-demand fabrication of unique mesoporous architectures. In addition, controlling the interfacial tension is critical to manipulate the self-assembly process for precise synthesis. In particular, recent breakthroughs based on the concept of the "monomicelles" assembly mechanism are very promising and interesting for the synthesis of functional mesoporous materials with the precise control. In this review, we highlight the synthetic strategies, principles, and interface engineering at the macroscale, microscale, and nanoscale for oriented interfacial assembly of functional mesoporous materials over the past 10 years. The potential applications in various fields, including adsorption, separation, sensors, catalysis, energy storage, solar cells, and biomedicine, are discussed. Finally, we also propose the remaining challenges, possible directions, and opportunities in this field for the future outlook.

An all-in-one approach for synthesis and functionalization of nano colloidal gold with acetylacetone

Controllable synthesis, proper dispersion, and feasible functionalization are crucial requirements for the application of nanomaterials in many scenarios. Here, we report an all-in-one approach for the synthesis and functionalization of gold nanoparticles (AuNPs) with the simplestβ-diketone, acetylacetone (AcAc). With this approach, the particle size of the resultant AuNPs was tunable by simply adjusting the light intensity or AcAc dosage. Moreover, owing to the capping role of AcAc, the resultant AuNPs could be stably dispersed in water for a year without obvious change in morphology and photochemical property. Formation of ligand to metal charge transfer complexes was found to play an important role in the redox conversion of Au with AcAc. Meanwhile, the moderate complexation ability enables the surface AcAc on the AuNPs to undergo ligand exchange reactions (LER). With the aid of Ag⁺, the AuNPs underwent LER with glutathione and exhibited enhanced photoluminescence (PL) with a maximum of 22-fold increase in PL intensity. The PL response was linear to the concentration of glutathione in the range of 0-500μM. Such a LER makes the obtained AuNPs being good imaging probes. To the best of our knowledge, this is the first work on illustrating the roles of AcAc as a multifunctional ligand in fabrication of NPs, which sheds new light on the surface modulation in synthesis of nanomaterials.

Synthesis, Assembly, Optical Properties, and Sensing Applications of Plasmonic Gap Nanostructures

Plasmonic gap nanostructures (PGNs) have been extensively investigated mainly because of their strongly enhanced optical responses, which stem from the high intensity of the localized field in the nanogap. The recently developed methods for the preparation of versatile nanogap structures open new avenues for the exploration of unprecedented optical properties and development of sensing applications relying on the amplification of various optical signals. However, the reproducible and controlled preparation of highly uniform plasmonic nanogaps and the prediction, understanding, and control of their optical properties, especially for nanogaps in the nanometer or sub-nanometer range, remain challenging. This is because subtle changes in the nanogap significantly affect the plasmonic response and are of paramount importance to the desired optical performance and further applications. Here, recent advances in the synthesis, assembly, and fabrication strategies, prediction and control of optical properties, and sensing applications of PGNs are discussed, and perspectives toward addressing these challenging issues and the future research directions are presented.

Controlling nanoparticle formation from the onset of nucleation through a multi-step continuous flow approach

HYPOTHESIS

Metallic nanoparticles of various shapes and sizes can be synthesised through a diversity of bottom-up pathways, such as precipitation induced by chemical reduction. Varying composition, by adjusting concentrations or adding/replacing species, is the predominant strategy to tune nanoparticles structures. However, controlling time down to the onset of precipitation, nucleation, should also provide a powerful means to control nanostructuration.

EXPERIMENTS

We perform sequential reagent additions with a time resolution down to the millisecond. We use a millifluidic continuous flow setup consisting of tangential mixers in series, which allows flow rates up to dozens of litres per hour. We systematically vary both addition order and delay for each reagent involved in the synthesis of silver nanoplates. The resulting dispersions are compared using UV-visible spectroscopy, transmission electron microscopy and small-angle X-ray scattering.

FINDINGS

We show that synthesis pathways differing only in the order of sub-second additions lead to drastically different synthetic outcomes. Silver nanoparticles of different shapes and sizes, displaying an array of plasmonic colours, are synthesised at the same final composition by tuning the composition pathways along time. Our results unlock a previously inaccessible portion of the space of parameters, which will lead to an enhanced structural diversity, control and understanding of nanoparticles syntheses.

Intermetallic Compounds: Liquid-Phase Synthesis and Electrocatalytic Applications

Characterized by long-range atomic ordering, well-defined stoichiometry, and controlled crystal structure, intermetallics have attracted increasing attention in the area of chemical synthesis and catalytic applications. Liquid-phase synthesis of intermetallics has arisen as the promising methodology due to its precise control over size, shape, and resistance toward sintering compared with the traditional metallurgy. This short review tends to provide perspectives on the liquid-phase synthesis of intermetallics in terms of both thermodynamics and methodology, as well as its applications in various catalytic reactions. Specifically, basic thermodynamics and kinetics in the synthesis of intermetallics will be first discussed, followed by discussing the main factors that will affect the formation of intermetallics during synthesis. The application of intermetallics in electrocatalysis will be demonstrated case by case at last. We conclude the review with perspectives on the future developments with respect to both synthesis and catalytic applications.

General Design Concept for Single-Atom Catalysts toward Heterogeneous Catalysis

As a new and popular material, single-atom catalysts (SACs) exhibit excellent activity, selectivity, and stability for numerous important reactions, and show great potential in heterogeneous catalysis due to their high atom utilization efficiency and the controllable characteristics of the active sites. The composition and coordination would determine the geometric and electronic structures of SACs, and thus greatly influence the catalytic performance. Based on atom economy, rational design and controllable synthesis of SACs have become central tasks in the fields of low-cost and green catalysis. Herein, an introduction to the recent progress in the precise synthesis of SACs including the regulation of the coordination structure and the choice of different systems is presented. Thereafter, the potentials of SACs in different applications are comprehensively summarized and discussed. Furthermore, a detailed discussion of the recent developments regarding the large-scale preparation of SACs is provided, including the major issues and prospects for industrialization. Finally, the main challenges and opportunities of rapid large-scale industrialization of SACs are briefly discussed.

Wettability of Magnetite Nanoparticles Guides Growth from Stabilized Amorphous Ferrihydrite

Crystal formation via amorphous precursors is a long-sought-after gateway to engineer nanoparticles with well-controlled size and morphology. Biomineralizing organisms, like magnetotactic bacteria, follow such a nonclassical crystallization pathway to produce magnetite nanoparticles with sophistication unmatched by synthetic efforts at ambient conditions. Here, using in situ small-angle X-ray scattering, we demonstrate how the addition of poly(arginine) in the synthetic formation of magnetite nanoparticles induces a biomineralization-reminiscent pathway. The addition of poly(arginine) stabilizes an amorphous ferrihydrite precursor, shifting the magnetite formation pathway from thermodynamic to kinetic control. Altering the energetic landscape of magnetite formation by catalyzing the pH-dependent precursor attachment, we tune magnetite nanoparticle size continuously, exceeding sizes observed in magnetotactic bacteria. This mechanistic shift we uncover here further allows for crystal morphology control by adjusting the pH-dependent interfacial interaction between liquidlike ferrihydrite and nascent magnetite nanoparticles, establishing a new strategy to control nanoparticle morphology. Synthesizing compact single crystals at wetting conditions and unique semicontinuous single-crystalline nanoparticles at dewetting conditions in combination with an improved control over magnetite crystallite size, we demonstrate the versatility of bio-inspired, kinetically controlled nanoparticle formation pathways.

Viscosity effect on the strategic kinetic overgrowth of molecular crystals in various morphologies: concave and octapod fullerene crystals

A kinetic overgrowth allowing organic molecular crystals in various morphologies is induced by temperature-dependent viscosity change of crystallization solution. By this strategy, concave cube and octapod fullerene C70 crystals were successfully obtained by antisolvent crystallization (ASC). The structural analysis of fullerene C70 crystals indicates that the morphological difference is the result of kinetic processes, which reveals that viscosity, the only variable that can change dynamics of solutes, has a significant influence on determining the morphology of crystals. The effect of solvent viscosity in the stage of crystal growth was investigated through time-dependent control experiments, which led to the proposal of a diffusion rate-based mechanism. Our findings suggest morphology control of organic crystals by diffusion rate control, which is scarcely known compared to inorganic crystals. This strategic method will promote the morphology controls of various organic molecular crystals, and boost the morphology-property relationship study.

Deciphering the Kinetic Study of Sodium Dodecyl Sulfate on Ag Nanoparticle Synthesis Using Cassia siamea Flower Extract as a Reducing Agent

Silver nanoparticles (Ag NPs) were synthesized using Cassia siamea flower petal extract (CSFE) as a reducing agent for the first time. In its presence and absence, the correlative effects of the anionic surface-active agent sodium dodecyl sulfate (SDS) were studied with respect to the development and texture of Ag NPs. Under different reagent compositions, the Ag NPs were inferred by localized surface plasmon resonance peaks between 419 and 455 nm. In the absence of SDS, there was a small eminence at 290 and around 350 nm, pointing toward the possibility of irregular polytope Ag NPs, which was confirmed in the transmission electron microscopy images. This elevation vanished beyond the cmc of [SDS], resulting in spherical and oval shaped Ag NPs. The effects of reagent concentrations were studied at 25 °C and around 7 and 9 pH in the absence and presence of SDS, respectively. Also, kinetic studies were performed by UV-visible spectrophotometry. Prodigious effects on shape and size were found under different synthesis conditions in terms of hexagonal, rod-, irregular-, and spherical shaped Ag NPs. Furthermore, the antimycotic activity of the synthesized Ag NPs was established on different Candida strains, and best results were found pertaining Candida tropicalis. The ensuing study impels the control of texture and dispersity for Ag NPs by CSFE and SDS, and the resultant polytope Ag NPs could be a future solution for drug-resistant pathogenic fungi.

Sequential Superassembly of Nanofiber Arrays to Carbonaceous Ordered Mesoporous Nanowires and Their Heterostructure Membranes for Osmotic Energy Conversion

The capture of sustainable energy from a salinity gradient, in particular, using renewable biomass-derived functional materials, has attracted significant attention. In order to convert osmotic energy to electricity, many membrane materials with nanofluidic channels have been developed. However, the high cost, complex preparation process, and low output power density still restrict the practical application of traditional membranes. Herein, we report the synthesis of highly flexible and mechanically robust nanofiber-arrays-based carbonaceous ordered mesoporous nanowires (CMWs) through a simple and straightforward soft-templating hydrothermal carbonization approach. This sequential superassembly strategy shows a high yield and great versatility in controlling the dimensions of CMWs with the aspect ratio changes from about 3 to 39. Furthermore, these CMWs can be used as novel building blocks to construct functional hybrid membranes on macroporous alumina. This nanofluidic membrane with asymmetric geometry and charge polarity exhibits low resistance and high-performance energy conversion. This work opens a solution-based route for the one-pot preparation of CMWs and functional heterostructure membranes for various applications.

Kinetically Controlled Synthesis of Rhodium Nanocrystals with Different Shapes and a Comparison Study of Their Thermal and Catalytic Properties

We report the synthesis of Rh nanocrystals with different shapes by controlling the kinetics involved in the growth of preformed Rh cubic seeds. Specifically, Rh nanocrystals with cubic, cuboctahedral, and octahedral shapes can all be obtained from the same cubic seeds under suitable reduction kinetics for the precursor. The success of such a synthesis also relies on the use of a halide-free precursor to avoid oxidative etching, as well as the involvement of a sufficiently high temperature to remove Br^- ions from the seeds while ensuring adequate surface diffusion. The availability of Rh nanocrystals with cubic and octahedral shapes allows for an evaluation of the facet dependences of their thermal and catalytic properties. The data from in situ electron microscopy studies indicate that the cubic and octahedral Rh nanocrystals can keep their original shapes up to 700 and 500 °C, respectively. When tested as catalysts for hydrazine decomposition, the octahedral nanocrystals exhibit almost 4-fold enhancement in terms of H₂ selectivity relative to the cubic counterpart. As for ethanol oxidation, the order is reversed, with the cubic nanocrystals being about three times more active than the octahedral sample.

Single-Crystalline Body Centered FeCo Nano-Octopods: From One-Pot Chemical Growth to a Complex 3D Magnetic Configuration

Single crystalline magnetic FeCo nanostars were prepared using an organometallic approach under mild conditions. The fine-tuning of the experimental conditions allowed the direct synthesis of these nano-octopods with body-centered cubic (bcc) structure through a one-pot reaction, contrarily to the seed-mediated growth classically used. The FeCo nanostars consist of 8 tetrahedrons exposing {311} facets, as revealed by high resolution transmission electron microscopy (HRTEM) imaging and electron tomography (ET), and exhibit a high magnetization comparable with the bulk one (M_s = 235 A·m²·kg^-1). Complex 3D spin configurations resulting from the competition between dipolar and exchange interactions are revealed by electron holography. This spin structures are stabilized by the high aspect ratio tetrahedral branches of the nanostars, as confirmed by micromagnetic simulations. This illustrates how magnetic properties can be significantly tuned by nanoscale shape control.

Embracing Defects and Disorder in Magnetic Nanoparticles

Iron oxide nanoparticles have tremendous scientific and technological potential in a broad range of technologies, from energy applications to biomedicine. To improve their performance, single-crystalline and defect-free nanoparticles have thus far been aspired. However, in several recent studies, defect-rich nanoparticles outperform their defect-free counterparts in magnetic hyperthermia and magnetic particle imaging (MPI). Here, an overview on the state-of-the-art of design and characterization of defects and resulting spin disorder in magnetic nanoparticles is presented with a focus on iron oxide nanoparticles. The beneficial impact of defects and disorder on intracellular magnetic hyperthermia performance of magnetic nanoparticles for drug delivery and cancer therapy is emphasized. Defect-engineering in iron oxide nanoparticles emerges to become an alternative approach to tailor their magnetic properties for biomedicine, as it is already common practice in established systems such as semiconductors and emerging fields including perovskite solar cells. Finally, perspectives and thoughts are given on how to deliberately induce defects in iron oxide nanoparticles and their potential implications for magnetic tracers to monitor cell therapy and immunotherapy by MPI.

Extended Nucleation and Superfocusing in Colloidal Semiconductor Nanocrystal Synthesis

Hot-injection synthesis is renowned for producing semiconductor nanocolloids with superb size dispersions. Burst nucleation and diffusion-controlled size focusing during growth have been invoked to rationalize this characteristic yet experimental evidence supporting the pertinence of these concepts is scant. By monitoring a CdSe synthesis in-situ with X-ray scattering, we find that nucleation is an extended event that coincides with growth during 15-20% of the reaction time. Moreover, we show that size focusing outpaces predictions of diffusion-limited growth. This observation indicates that nanocrystal growth is dictated by the surface reactivity, which drops sharply for larger nanocrystals. Kinetic reaction simulations confirm that this so-called superfocusing can lengthen the nucleation period and promote size focusing. The finding that narrow size dispersions can emerge from the counteracting effects of extended nucleation and reaction-limited size focusing ushers in an evidence-based perspective that turns hot injection into a rational scheme to produce monodisperse semiconductor nanocolloids.

Strength evolution laws in curing of solvent-welded polymers

This paper reports the scaling laws to describe the time-evolution behavior of solvent-mediated strength at the interface between two identical thermoplastic polymers below the glass-transition temperature. Our results suggest that the evolution scales as sqrt[t], where t is the curing time. It depends on the time evolution of interfacial stiffness and toughness, each of which scales as sqrt[t]. Employing a combination of experiments and continuum scale simulations, we show that the evolution of strength, stiffness, and toughness is controlled by pure diffusion. It can therefore be treated as a Gaussian process. While the "saturation of strength," which describes the transition of strength evolution into a steady state, does not strictly follow any power-law type behavior, a simple exponential law accurately characterizes both evolution and saturation of strength. This suggests that the longer timescale nonlinear processes (that are overdetermined by the power-law type scaling laws) diminish rapidly in approaching a steady state. Furthermore, the kinetics of the evolution processes is well captured by the dissolution of polymer particles. While dissolution involves a different timescale, it strongly correlates with the solvent-welding process upon normalization. The correlation highlights the equivalence of the dissolution and solvent-joining processes and offers an easier route to determining strength at arbitrary curing times. Additionally, the dissolution rate of polymer particles is shape dependent and governed by the surface-to-volume ratio.

One-Pot Heterointerfacial Metamorphosis for Synthesis and Control of Widely Varying Heterostructured Nanoparticles

Despite remarkable facileness and potential in forming a wide variety of heterostructured nanoparticles with extraordinary compositional and structural complexity, one-pot synthesis of multicomponent heterostructures is largely limited by the lack of fundamental mechanistic understanding, designing principles, and well-established, generally applicable chemical methods. Herein, we developed a one-pot heterointerfacial metamorphosis (1HIM) method that allows heterointerfaces inside a particle to undergo multiple equilibrium stages to form a variety of highly crystalline heterostructured nanoparticles at a relatively low temperature (<100 °C). As proof-of-concept experiments, it was shown that widely different single-crystalline semiconductor-metal anisotropic nanoparticles with synergistic chemical, spectroscopic, and band-gap-engineering properties, including a series of metal-semiconductor nanoframes with high structural and compositional tunability, can be formed by using the 1HIM approach. 1HIM offers a new paradigm to synthesize previously unobtainable or poorly controllable heterostructures with unique or synergistic properties and functions.

Tailoring the Chemical Potential of Crystal Growth Units to Tune the Bulk Structure of Nanocrystals

The intrinsic factors affecting the bulk structures of nanocrystallites are not well explored during crystallization. In this study, it is demonstrated that the chemical potential of growth units plays decisive role in governing the final structure of nanocrystals. It is found that the types of reaction vessels are able to vary the chemical potential of growth units, and make the Pt and Pd nanocrystals (NCs) unexpectedly evolve from the cyclic penta-twinned to the single-crystal nanostructures. In turn, it is concluded that the crystal growth units with lower chemical potential favor the formation of crystal nuclei with lower chemical potential during the nucleation. This new approach in tuning the bulk structures of NCs enriches the understanding of the crystallization process under supersaturated (nonequilibrium) condition, and would provide a general guidance for controlling nanocrystals with various thermodynamic forms.

Liquid Nanoparticles: Manipulating the Nucleation and Growth of Nanoscale Droplets

By manipulating the nucleation and growth of solid materials, the synthesis of various sophisticated nanostructures has been achieved. Similar methodology, if applied to liquids, could enable the mass-production and control of ultra-small droplets at the scale of nanoparticles (10^-18  L or below). It would be highly desirable since droplets play a fundamental role in numerous applications. Here we present a general strategy to synthesize and manipulate nanoscale droplets, similar to what has been done to solid nanoparticles in classic solution-synthesis. It was achieved by a solute-induced phase separation which initiates the nucleation of droplets from a homogeneous solution. These liquid nanoparticles have great potentials to be manipulated like their solid counterparts, borrowing from the vast methodologies of nanoparticle synthesis, such as burst nucleation, seeded growth, and co-precipitation. Liquid nanoparticles also serve as a general synthetic platform, to fabricate nanoreactors, drug-loaded carriers, and other hollow nanostructures with a variety of shell materials.

Using Reduction Kinetics to Control and Predict the Outcome of a Colloidal Synthesis of Noble-Metal Nanocrystals

Improving the performance of noble-metal nanocrystals in various applications critically depends on our ability to manipulate their synthesis in a rational, robust, and controllable fashion. Different from a conventional trial-and-error approach, the reduction kinetics of a colloidal synthesis has recently been demonstrated as a reliable knob for controlling the synthesis of noble-metal nanocrystals in a deterministic and predictable manner. Here we present a brief Viewpoint on the recent progress in leveraging reduction kinetics for controlling and predicting the outcome of a synthesis of noble-metal nanocrystals. With a focus on Pd nanocrystals, we first offer a discussion on the correlation between the initial reduction rate and the internal structure of the resultant seeds. The kinetic approaches for controlling both nucleation and growth in a one-pot setting are then introduced with an emphasis on manipulation of the reduction pathways taken by the precursor. We then illustrate how to extend the strategy into a bimetallic system for the preparation of nanocrystals with different shapes and elemental distributions. Finally, the influence of speciation of the precursor on reduction kinetics is highlighted, followed by our perspectives on the challenges and future endeavors in achieving a controllable and predictable synthesis of noble-metal nanocrystals.

Unveiling surface charge on chalcogen atoms toward the high aspect-ratio colloidal growth of two-dimensional transition metal chalcogenides

Controlling surface energies of each facet is essential for the anisotropic growth of two-dimensional transition metal chalcogenides (TMCs). However, it is a challenge due to stronger binding energies of ligand head groups to the edge facets compared to the planar facets. Herein, we demonstrate that the adsorption of ligands on metal positions can induce partial electron localization on the chalcogen sites, and then accelerate metal-chalcogen bond formation for enhanced anisotropic growth of nanosheets. And only in the case of trioctylphosphine oxide (TOPO)-adsorbed nanosheets, surface polarization can be unveiled on the surface of the colloidal nanosheets due to restricted development of nonpolar ligand shells by the steric effects of the ligands. Moreover, density functional theory (DFT) calculation results reveal that the decrease of surface energy on the (100) edge facets as well as the increase on the (001) basal facets by the adsorption of triorganylphosphine oxide also contribute to the preferentially lateral growth. As a result, various 2D TMCs, including MoSe2, WSe2, and SnSe2 synthesized with TOPO, show enhanced anisotropic growth.

Designing caps for colloidal Au nanoparticles

The plasmonic property of a nanostructure is highly dependent on its morphology, but there are few methods for appending a domain as the "functional group" or modifier. As a means of modulating plasmonic properties, we create and modulate Au hats on Au nanoparticles, including mortarboards, beret hats, helmets, crowns, antler hats and antenna hats. The structural control arises from the active surface growth as a result of dynamic competition between ligand absorption and metal deposition. It allows the continuous tuning of hat morphologies, from the facet-controlled growth of mortarboards, to the spreading-favored growth of beret hats and helmets, and to the vertical growth of pillars in crowns, antler hats and antenna hats. Among these plasmonic nanostructures, the mortarboards show excellent SERS enhancement of 8.1 × 105, which is among the best in colloidal nanostructures; and the antler hats show the photothermal conversion efficiency of 66.2%, which compares favorably with the literature reports.

Using Interaction of Nano Dipoles to Control the Growth of Nanorods

Charged facets of a nanocrystal can form an intrinsic nanometer-size electric dipole. When the spacing between these nano dipoles is adjusted, the dipolar interaction energy is tuned from a fraction to a multiple of the thermal energy. Consequently, the one-dimensional oriented attachment can be switched on or off, as is the growth of nanorods. This kinetically controlled growth is achieved at relatively low reaction temperatures while the thermodynamically controlled growth dominates at higher temperatures. The synthesized PbSe nanorods are branchless, exhibiting a single-exponential photoluminescence decay trace with an e-folding lifetime of 1.3 μs and a photoluminescence quantum yield of 35%.

Drug Incorporation in the Drug Delivery System of Micelles

Micelles is a system frequently used for drug delivery. Drugs are incorporated and protected in micelles before being delivered. Nuclear magnetic resonance is a suitable technique to detect the localization and incorporation of drugs into the micelle system. Free radicals are used to further facilitate the probing of the interactions between drug and micelles. This information is critical because drug-micelle interactions determine how easily the drug will be released from micelles and therefore how easily will be delivered to the target.

Intramolecular Hydrogen Bonds in Tip-Functionalized Single-Walled Carbon Nanotubes as pH-Sensitive Gates

Since their discovery, carbon nanotubes and other related nanomaterials are in the spotlight due to their unique molecular structures and properties, having a wide range of applications. The cage-like structure of carbon nanotubes is especially appealing as a route to confine molecules, isolating them from the solvent medium. This study aims to explore and characterize, through density functional theory (DFT) calculations, covalent tip-functionalization of single-walled carbon nanotubes (SWCNTS) with carboxymethyl moieties that establish pH sensitive molecular gates. The response of the molecular gate to pH fluctuations arises from variations in the noncovalent interactions between functionalized groups, which depend on the extent of protonation, leading to conformational changes. Overall, the hydrogen bonds present in the molecular models under study, as evaluated through topological analysis and pK_a calculations, suggest that functionalized SWCNTs may be suitable for the design of drug delivery systems to enhance the efficiency of some pharmacological treatments, or even in the area of catalysis and separation processes, through their incorporation in nanocomposites.

Made-to-Order Heterostructured Nanoparticle Libraries

Nanoparticles that contain multiple materials connected through interfaces, often called heterostructured nanoparticles, are important constructs for many current and emerging applications. Such particles combine semiconductors, metals, insulators, catalysts, magnets, and other functional components that interact synergistically to enable applications in areas that include energy, nanomedicine, nanophotonics, photocatalysis, and active matter. To synthesize heterostructured nanoparticles, it is important to control all of the property-defining features of individual nanoparticles-size, shape, uniformity, crystal structure, composition, surface chemistry, and dispersibility-in addition to interfaces, asymmetry, and spatial organization, which facilitate communication among the constituent materials and enable their synergistic functions. While it is challenging to control all of these nanoscale features simultaneously, nanoparticle cation exchange reactions offer powerful capabilities that overcome many of the synthetic bottlenecks. In these reactions, which are often carried out on metal chalcogenide materials such as roxbyite copper sulfide (Cu_1.8S) that have high cation mobilities and a high density of vacancies, cations from solution replace cations in the nanoparticle. Replacing only a fraction of the cations can produce phase-segregated products having internal interfaces, i.e., heterostructured nanoparticles. By the use of multiple partial cation exchange reactions, multicomponent heterostructured nanoparticles can be synthesized.In this Account, we discuss the use of multiple sequential partial cation exchange reactions to rationally construct complex heterostructured nanoparticles toward the goal of made-to-order synthesis. Sequential partial exchange of the Cu⁺ cations in roxbyite Cu_1.8S spheres, rods, and plates produces a library of 47 derivatives that maintain the size, shape, and uniformity defined by the roxbyite templates while introducing various types of interfaces and different materials into the resulting heterostructured nanoparticles. When an excess of the metal salt reagent is used, the reaction time controls the extent of partial cation exchange. When a substoichiometric amount of metal salt reagent is used instead, the extent of partial cation exchange can be precisely controlled by the cation concentration. This approach allows significant control over the number, order, and location of partial cation exchange reactions. Up to seven sequential partial cation exchange reactions can be applied to roxbyite Cu_1.8S nanorods to produce derivative heterostructured nanorods containing as many as six different materials, eight internal interfaces, and 11 segments, i.e. ZnS-CuInS₂-CuGaS₂-CoS-[CdS-(ZnS-CuInS₂)]-Cu_1.8S. We considered all possible injection sequences of five cations (Zn²⁺, Cd²⁺, Co²⁺, In³⁺, Ga³⁺) applied to all accessible Cu_1.8S-derived nanorod precursors along with simple design criteria based on preferred cation exchange locations and crystal structure relationships. Using these guidelines, we mapped out synthetically feasible pathways to 65 520 distinct heterostructured nanorods, experimentally observed 113 members of this heterostructured nanorod megalibrary, and then made three of these in high yield and in isolatable quantities. By expansion of these capabilities into a broader scope of materials and identification of additional design guidelines, it should be possible to move beyond model systems and access functional targets rationally and retrosynthetically. Overall, the ability to access large libraries of complex heterostructured nanoparticles in a made-to-order manner is an important step toward bridging the gap between design and synthesis.

PtCo-excavated rhombic dodecahedral nanocrystals for efficient electrocatalysis

Platinum (Pt)-based catalysts have shown excellent catalytic performance in many fields, particularly for the oxygen reduction reaction (ORR) and direct oxidation of small fuel molecules. Further development of Pt-based electrocatalysts relies on the morphology design of Pt-based alloy nanocrystals (NCs) with highly accessible and active surface sites to optimize Pt atomic utilization. In this work, we reported PtCo-excavated rhombic dodecahedral (ERD) NCs consisting of the self-assembly of 24 ultrathin nanosheets synthesized by a simple wet chemical method. The morphology can be regulated from convex to excavated polyhedra by controlling the amount of formaldehyde and the molar ratio of the Co/Pt precursor. The as-prepared PtCo ERD NCs/C catalyst exhibits excellent ORR performance, which has about 12 times higher specific activity and 6 times higher mass activity than the commercial Pt/C catalyst. It also displays good electrocatalytic ability towards methanol oxidation, in which the specific activity and mass activity are about 6 times higher and 2 times higher than the commercial Pt/C, respectively. Their enhanced activity is attributed to the excavated structure and alloy feature.