Amphotericin B Formulations and Drug Targeting

Amphotericin B from antifungal to antiviral therapy: promising modern therapeutic branch

Introduction: Amphotericin B (AmB) which belongs to the polyene group has a wide spectrum in vitro and in vivo antimicrobial activity against fungi and parasites, but resistance to AmB is rare despite extensive use.

Material and methods: Atotal of 2530 articles were investigated in PubMed (n = 1525), Medline (n = 705), and Google Scholar (n = 300). From 2530 articles, only 61 studies were included in this review. All the short and full articles were searched that were scheduled to be published until April 2020.

Results: After its discovery, AmB has been one of the most common first-line choices in treating systemic fungal infection for over seven decades from its discovery. Recently, some studies have focused on the potential antimicrobial action of AmB against some enveloped and non-enveloped viruses, such as human immunodeficiency virus, Japanese encephalitis virus, herpes simplex virus, and Rubella virus.

Discussion: Among the invading pathogens, viruses constitute the most common ones,Due to the continuous spreading of viral infections with the rise in death numbers, new therapeutics development is urgent, as in general, some lethal viruses have no specific antiviral drugs or vaccines. So, this review may serve as an impetus for researchers working in the field of medical microbiology, vaccination, and antiviral drug design by discussing the most recent information about the antiviral action of AmB, as well as trying to provide a deeper understanding of major properties, mechanisms of action, immune system responses, and antimicrobial efficiency of AmB.

Conclusion: Since AmB is expected to alter the structure of the viral envelope, membrane integrity of cells, and internal cellular organelles, besides its other unique properties, such as host immunomodulatory effects, this review suggested that AmB as an effective anti-fungi drug may hold the promise of formulating a novel therapeutic option to treat many dangerous viruses, including those for treating which there are no active drugs or vaccines.

Amphotericin B as antiviral drug: Possible efficacy against COVID-19

Since its discovery, amphotericin B (AmB) is still one of the most common first-line choices in treatment pulmonary mycoses for over seventh decades from discovery. AmB which is belonged to the polyene group has a wide spectrum in vitro and in vivo antimicrobial activity against fungi and parasites, resistance to AmB is rare despite extensive use. Recently, some studies focused on the potential antimicrobial action of AmB against some enveloped viruses such as human immunodeficiency virus, Japanese encephalitis virus, and rubella virus. Coronaviruses are enveloped positive-sense RNA nucleic acid viruses that have club-like spikes, characterized by a distinctive replication strategy; they are round and sometimes pleomorphic shapes. COVID-19 is regarding the new genera of coronaviridae that appear the first time in Wuhan, China, in early December 2019. Due to the continuous spreading of the novel COVID-19 with the exponential rise in death numbers, new therapeutic development is urgent, in general, there are no specific antiviral drugs or vaccines for 2019-novel coronavirus. Hence, this review may serve as an impetus for researchers working in the field of medical microbiology, vaccination, and antiviral drug design by discussion the most recent information about the antiviral action of AmB against COVID-19 infection as well as trying to a deep understanding of major properties, mechanisms of action, immune system responses, and antimicrobial efficiency of AmB. Since AmB is expected to alter the structure of the viral envelope, membrane integrity of cells, and internal cellular organelles, besides its other unique properties such as host immunomodulatory effects, so this review suggested that AmB as an effective anti-fungi drug thus may hold the promise of formulating a novel therapeutic option to treat COVID-19.

Amphotericin B loaded ethyl cellulose nanoparticles with magnified oral bioavailability for safe and effective treatment of fungal infection

Amphotericin B is a gold standard drug used in various fungal and parasitic infection treatment. Most of the marketed formulations are administered intravenously, but show dose-dependent adverse effects i.e., nephrotoxicity and hemolysis. Oral route eliminates the toxic concern but exhibits poor bioavailability. Therefore, ethylcellulose nanoparticles (EC-NPs) have been used for magnified oral delivery of AmB, where EC provides gastrointestinal stability. These nanoparticles were synthesized by high-pressure emulsification solvent evaporation (HPESE) method and evaluated for in vitro and in vivo studies. This method yields small, monodisperse AmB-EC-NPs along with smooth surface morphology and improved encapsulation efficiency. The developed formulation showed a sustained release pattern following Higuchi diffusion kinetics along with gastric and storage stability. Aggregation study revealed that AmB was present in its monomeric form inside the biocompatible EC matrix. The antifungal result demonstrated that the MIC of AmB-EC-NPs was reduced ∼1/3rd than AmB and Fungizone® at 24 h whereas it was observed ∼1/8th at 48 h. in vivo pharmacokinetic analysis demonstrated 1.3-fold higher AUC than Fungizone® even at a 4.5-time lesser dose via the oral route and a ∼15-fold rise in the bioavailability in contrast to the native AmB. The hemolytic study revealed that the developed formulation exhibited 8-fold lesser hemolysis than Fungizone®. Furthermore, the biosafety profile of AmB-EC-NPs was ensured by the significantly lesser level of blood urea nitrogen and plasma creatinine along with the normal pattern of renal tubules in comparison to AmB and Fungizone®. In conclusion, the results stipulated that the AmB-EC-NPs could be effective, viable and a better alternative to currently existing iv formulations, for magnified oral delivery of AmB in the treatment of fungal infection without associated adverse effects.

Optimization of the manufacturing process of a complex amphotericin B liposomal formulation using quality by design approach

In this work, the manufacturing process of a complex liposomal amphotericin B (AmB) product was optimized using quality by design (QbD) approach. A comprehensive QbD-based process understanding and design space (DS) to the critical process parameters (CPPs) is essential to the drug development and consistent quality control. The process was based on the acid-aided formation of drug-lipid complexes in a methanol-chloroform mixture (step I) followed by spray drying (step II), hydration and liposome formation by microfluidization (step III), and lyophilization (step IV). Firstly, the risk assessment was conducted to identify the critical process parameters among the four key steps. Nine CPPs and five CQAs (API Monomer identity (absorbance main peak at 321 nm), API Aggregation identity (absorbance peak ratio, OD 415 nm/321 nm), particle size, in-vitro toxicity, and the cake quality) were determined based on their severity and occurrences with their contribution to the quality target product profile (QTPP). Based on the risk assessment results, the final screening design of experiments (DoE) was developed using fractional factorial design. Secondly, the empirical equation was developed for each CQA based on experimental data. The impact of CPPs on the CQAs was analyzed using the coefficient plot and contour plot. In addition to the effect of individual formulation parameters and process parameters, the effects of the four key separate steps were also evaluated and compared. In general, the curing temperature during microfluidization has been identified as the most significant CPP. Finally, design space exploration was carried out to demonstrate how the critical process parameters can be varied to consistently produce a drug product with desired characteristics. The design space size increased at the higher value of the curing temperature, the API to phospholipid ratio (API:PL), and the lower value of the DSPG to phospholipid ratio (PG:PL) and aspirator rate.

Preparation, Characterization, and Formulation Optimization of Ionic-Liquid-in-Water Nanoemulsions toward Systemic Delivery of Amphotericin B

Amphotericin B (AmB) is an antifungal agent that poses a challenge for intravenous drug delivery due to its hydrophobicity and severe side effects that are attributed to the self-aggregation of AmB in aqueous solution. To overcome this problem, we have rationally designed an ionic-liquid-in-water nanoemulsion drug delivery system that harnesses the unique properties of ionic liquids. The complex drug AmB serves as a model pharmaceutical agent to demonstrate the robustness of ionic-liquid-in-water nanoemulsions. High concentrations of AmB were solubilized in a new hydrophobic dicholinium-based ionic liquid. The absorption spectrum of AmB in an ionic liquid mixture and prepared nanoemulsion indicates AmB solubilization in the monomeric form. The hydrophobic ionic liquid exhibits high in vivo biocompatibility with zebrafish. The hemolytic activity of the AmB nanoemulsion was negligible, yet it maintained antifungal activity against Candida albicans. The preliminary results presented in this Communication indicate that ionic-liquid-in-water nanoemulsions may allow for the delivery of a variety of pharmaceuticals intravenously, broadening the scope of ionic liquids in the pharmaceutical sciences.

Lipid-based nanoparticle formulations for small molecules and RNA drugs

Introduction: Liposomes and lipid-based nanoparticles (LNPs) effectively deliver cargo molecules to specific tissues, cells, and cellular compartments. Patients benefit from these nanoparticle formulations by altered pharmacokinetic properties, higher efficacy, or reduced side effects. While liposomes are an established delivery option for small molecules, Onpattro® (Sanofi Genzyme, Cambridge, MA) is the first commercially available LNP formulation of a small interfering ribonucleic acid (siRNA). Areas covered: This review article summarizes key features of liposomal formulations for small molecule drugs and LNP formulations for RNA therapeutics. We describe liposomal formulations that are commercially available or in late-stage clinical development and the most promising LNP formulations for ASOs, siRNAs, saRNA, and mRNA therapeutics. Expert opinion: Similar to liposomes, LNPs for RNA therapeutics have matured but still possess a niche application status. RNA therapeutics, however, bear an immense hope for difficult to treat diseases and fuel the imagination for further applications of RNA drugs. LNPs face similar challenges as liposomes including limitations in biodistribution, the risk to provoke immune responses, and other toxicities. However, since properties of RNA molecules within the same group are very similar, the entire class of therapeutic molecules would benefit from improvements in a few key parameters of the delivery technology.

Targeting of Hepatic Macrophages by Therapeutic Nanoparticles

Hepatic macrophage populations include different types of cells with plastic properties that can differentiate into diverse phenotypes to modulate their properties in response to different stimuli. They often regulate the activity of other cells and play an important role in many hepatic diseases. In response to those pathological situations, they are activated, releasing cytokines and chemokines; they may attract circulating monocytes and exert functions that can aggravate the symptoms or drive reparation processes. As a result, liver macrophages are potential therapeutic targets that can be oriented toward a variety of aims, with emergent nanotechnology platforms potentially offering new perspectives for macrophage vectorization. Macrophages play an essential role in the final destination of nanoparticles (NPs) in the organism, as they are involved in their uptake and trafficking in vivo. Different types of delivery nanosystems for macrophage recognition and targeting, such as liposomes, solid-lipid, polymeric, or metallic nanoparticles, have been developed. Passive targeting promotes the accumulation of the NPs in the liver due to their anatomical and physiological features. This process is modulated by NP characteristics such as size, charge, and surface modifications. Active targeting approaches with specific ligands may also be used to reach liver macrophages. In order to design new systems, the NP recognition mechanism of macrophages must be understood, taking into account that variations in local microenvironment may change the phenotype of macrophages in a way that will affect the uptake and toxicity of NPs. This kind of information may be applied to diseases where macrophages play a pathogenic role, such as metabolic disorders, infections, or cancer. The kinetics of nanoparticles strongly affects their therapeutic efficacy when administered in vivo. Release kinetics could predict the behavior of nanosystems targeting macrophages and be applied to improve their characteristics. PBPK models have been developed to characterize nanoparticle biodistribution in organs of the reticuloendothelial system (RES) such as liver or spleen. Another controversial issue is the possible toxicity of non-degradable nanoparticles, which in many cases accumulate in high percentages in macrophage clearance organs such as the liver, spleen, and kidney.

Development of Amphotericin B Micellar Formulations Based on Copolymers of Poly(ethylene glycol) and Poly(ε-caprolactone) Conjugated with Retinol

Amphotericin B (AmB) is a broad spectrum of antifungal drug used to treat antifungal diseases. However, due to the high toxicity of AmB, treated patients may suffer the risk of side effects, such as renal failure. Nanoencapsulation strategies have been reported to elicit low toxicity, albeit most of them possess low encapsulation efficiency. The aim of this research is to develop micellar delivery systems for AmB with reduced toxicity while maintaining its affectivity by employing retinol (RET)-conjugated amphiphilic block copolymers (ABCs) as precursors. Copolymers composed of poly(ε-caprolactone) (A) and polyethylenglycol (B) of types AB and ABA were synthesized by ring opening polymerization and subsequently conjugated with RET by Steglich esterification. 1H-NMR spectroscopy was used to corroborate the structure of copolymers and their conjugates and determine their molecular weights. Analysis by gel permeation chromatography also found that the materials have narrow distributions. The resulting copolymers were used as precursors for delivery systems of AmB, thus reducing its aggregation and consequently causing a low haemolytic effect. Upon conjugation with RET, the encapsulation capacity was enhanced from approximately 2 wt % for AB and ABA copolymers to 10 wt %. AmB encapsulated in polymer micelles presented improved antifungal efficiency against Candida albicans and Candida auris strains compared with Fungizone®, as deduced from the low minimum inhibitory concentration.

Lipid Systems for the Delivery of Amphotericin B in Antifungal Therapy

Amphotericin B (AmB), a broad-spectrum polyene antibiotic in the clinic for more than fifty years, remains the gold standard in the treatment of life-threatening invasive fungal infections and visceral leishmaniasis. Due to its poor water solubility and membrane permeability, AmB is conventionally formulated with deoxycholate as a micellar suspension for intravenous administration, but severe infusion-related side effects and nephrotoxicity hamper its therapeutic potential. Lipid-based formulations, such as liposomal AmB, have been developed which significantly reduce the toxic side effects of the drug. However, their high cost and the need for parenteral administration limit their widespread use. Therefore, delivery systems that can retain or even enhance antimicrobial efficacy while simultaneously reducing AmB adverse events are an active area of research. Among those, lipid systems have been extensively investigated due to the high affinity of AmB for binding lipids. The development of a safe and cost-effective oral formulation able to improve drug accessibility would be a major breakthrough, and several lipid systems for the oral delivery of AmB are currently under development. This review summarizes recent advances in lipid-based systems for targeted delivery of AmB focusing on non-parenteral nanoparticulate formulations mainly investigated over the last five years and highlighting those that are currently in clinical trials.

Drug Delivery of Amphotericin B through Core-Shell Composite Based on PLGA/Ag/Fe3O4: In Vitro Test

This research aimed at developing and designing a slow and targeted delivery of Amphotericin B (AmB) antibiotic by placing three types of shells containing different ratios of biodegradable and biocompatible polymers poly (D, L-lactide)-co-(glycolide) (PLGA), polyethylene glycol (PEG), and polyvinyl pyrrolidone (PVP) on core-shell structures including silver nanoparticles that were activated with magnetic nanoparticles (MNPs). Emulsion solvent evaporation technique was employed to synthesize three types of shells: (i) (PVP-PEG) (100:20, w/w), (ii) (PLGA-PEG) (100:20, w/w), and (iii) (PLGA-PEG) (50:10, w/w) introduced as D1, D2, and D3 respectively. The in vitro release of AmB was examined in aqueous medium phosphate buffer saline (PBS) in pH~ 7.2. Several spectroscopy methods characterized the structure and properties of the nanoparticles. In vitro antifungal activity of pure AmB and D1, D2, and D3 was studied against Candida albicans (C. albicans). The results explained that frequency of drug released from D2 at the first 10 h was (18%) that was compared with D1 (30%) and D3 (24%) at the same time. D2 had more efficient and longer targeted controlled release. The findings showed that D2 can be used as an effective carrier for in vitro targeted controlled release and D2 and D3 had powerful activity against C. albicans.

ABCA1 transporter reduces amphotericin B cytotoxicity in mammalian cells

Amphotericin B (AmB) belongs to a group of polyene antibiotics commonly used in the treatment of systemic mycotic infections. A widely accepted mechanism of action of AmB is based on the formation of an oligomeric pore structure within the plasma membrane (PM) by interaction with membrane sterols. Although AmB binds preferentially to ergosterol, it can also bind to cholesterol in the mammalian PM and cause severe cellular toxicity. The lipid content and its lateral organization at the cell PM appear to be significant for AmB binding. Several ATP-binding cassette (ABC) transporters, including ABCA1, play a crucial role in lipid translocation, cholesterol redistribution and efflux. Here, we demonstrate that cells expressing ABCA1 are more resistant to AmB treatment, while cells lacking ABCA1 expression or expressing non-active ABCA1MM mutant display increased sensitivity. Further, a FLIM analysis of AmB-treated cells reveals a fraction of the antibiotic molecules, characterized by relatively high fluorescence lifetimes (> 6 ns), involved in formation of bulk cholesterol-AmB structures at the surface of ABCA1-expressing cells. Finally, lowering the cellular cholesterol content abolishes resistance of ABCA1-expressing cells to AmB. Therefore, we propose that ABCA1-mediated cholesterol efflux from cells induces formation of bulk cholesterol-AmB structures at the cell surface, preventing AmB cytotoxicity.

Preparation, Characterization, and In Vivo Pharmacokinetic Study of the Supercritical Fluid-Processed Liposomal Amphotericin B

Here, we aimed to prepare and optimize liposomal amphotericin B (AmB) while using the supercritical fluid of carbon dioxide (SCF-CO₂) method and investigate the characteristics and pharmacokinetics of the SCF-CO₂-processed liposomal AmB. Liposomes containing phospholipids, ascorbic acid (vit C), and cholesterol were prepared by the SCF-CO₂ method at an optimized pressure and temperature; conventional liposomes were also prepared using the thin film hydration method and then compared with the SCF-CO₂-processed-liposomes. The optimized formulation was evaluated by in vitro hemolysis tests on rat erythrocytes and in vivo pharmacokinetics after intravenous administration to Sprague-Dawley rats and compared with a marketed AmB micellar formulation, Fungizone^®, and a liposomal formulation, AmBisome^®. The results of the characterization studies demonstrated that the SCF-CO₂-processed-liposomes were spherical particles with an average particle size of 137 nm (after homogenization) and drug encapsulation efficiency (EE) was about 90%. After freeze-drying, mean particle size, EE, and zeta potential were not significantly changed. The stability study of the liposomes showed that liposomal AmB that was prepared by the SCF method was stable over time. In vivo pharmacokinetics revealed that the SCF-CO₂-processed-liposomes were bioequivalent to AmBisome^®; the hemolytic test depicted less hematotoxicity than Fungizone^®. Therefore, this method could serve as a potential alternative for preparing liposomal AmB for industrial applications.

Therapeutic Challenges of Non-Aspergillus Invasive Mold Infections in Immunosuppressed Patients

While Aspergillus spp. remain the major cause of invasive mold infections in hematologic cancer patients and transplant recipients, other opportunistic molds, such as Mucorales, Fusarium, and Scedosporium spp. are increasingly encountered in an expanding population of patients with severe and prolonged immunosuppression. High potential for tissue invasion and dissemination, resistance to multiple antifungals and high mortality rates are hallmarks of these non-Aspergillus invasive mold infections (NAIMIs). Assessment of drug efficacy is particularly difficult in the complex treatment scenarios of NAIMIs. Specifically, correlation between in vitro susceptibility and in vivo responses to antifungals is hard to assess, in view of the multiple, frequently interrelated factors influencing outcomes, such as pharmacokinetic/pharmacodynamic parameters determining drug availability at the site of infection, the net state of immune suppression, delay in diagnosis, or surgical debulking of infectious foci. Our current therapeutic approach of NAIMIs should evolve toward a better integration of the dynamic interactions between the pathogen, the drug and the host. Innovative concepts of experimental research may consist in manipulating the host immune system to induce a specific antifungal response or targeted drug delivery. In this review, we discuss the challenges in the management of NAIMIs and provide an update about the latest advances in diagnostic and therapeutic approaches.

Advances in nanocarriers as drug delivery systems in Chagas disease

Chagas disease is one of the most important public health problems in Latin America due to its high mortality and morbidity levels. There is no effective treatment for this disease since drugs are usually toxic with low bioavailability. Serious efforts to achieve disease control and eventual eradication have been unsuccessful to date, emphasizing the need for rapid diagnosis, drug development, and a reliable vaccine. Novel systems for drug and vaccine administration based on nanocarriers represent a promising avenue for Chagas disease treatment. Nanoparticulate systems can reduce toxicity, and increase the efficacy and bioavailability of active compounds by prolonging release, and therefore improve the therapeutic index. Moreover, nanoparticles are able to interact with the host's immune system, modulating the immune response to favour the elimination of pathogenic microorganisms. In addition, new advances in diagnostic assays, such as nanobiosensors, are beneficial in that they enable precise identification of the pathogen. In this review, we provide an overview of the strategies and nanocarrier-based delivery systems for antichagasic agents, such as liposomes, micelles, nanoemulsions, polymeric and non-polymeric nanoparticles. We address recent progress, with a particular focus on the advances of nanovaccines and nanodiagnostics, exploring new perspectives on Chagas disease treatment.

Designing Fast-Dissolving Orodispersible Films of Amphotericin B for Oropharyngeal Candidiasis

Amphotericin B possesses high activity against Candida spp. with low risk of resistance. However, Amphotericin B's high molecular weight compared to other antifungal drugs, such as miconazole and clotrimazole, and poor water solubility hampers its efficacy at the physiological conditions of the oropharyngeal cavity (saliva pH, limited volume for dissolution) and thereby limits its clinical use in oropharyngeal candidiasis. We have prepared fast-dissolving orodispersible films with high loading (1% w/w) using solvent casting that enables amphotericin B to remain solubilised in saliva in equilibrium between the monomeric and dimeric states, and able to produce a local antifungal effect. Optimisation of the amphotericin B-loaded orodispersible films was achieved by quality by design studies combining dextran and/or maltodextrin as dextrose-derived-polymer film formers with cellulose-derived film formers (hydroxypropylmethyl/hydroxypropyl cellulose in a 1:4 weight ratio), sorbitol for taste masking, microcrystalline cellulose (Avicel 200) or microcrystalline cellulose-carboxymethylcellulose sodium (Avicel CL-611) for enhancing the mechanical strength of the film, and polyethylene glycol 400 and glycerol (1:1 w/w) as plasticizers. The optimised amphotericin B orodispersible films (containing 1% AmB, 25% dextran, 25% maltodextrin, 5% sorbitol, 10% Avicel 200, 10% polyethylene glycol 400, 10% glycerol, 3% hydroxypropylmethyl cellulose acetate succinate, 12% hydroxypropyl cellulose) possessed a fast disintegration time (60 ± 3 s), quick release in artificial saliva (>80% in 10 min), high burst strength (2190 mN mm) and high efficacy against several Candida spp. (C. albicans, C. parapsilosis and C. krusei) (>15 mm inhibition halo). Amphotericin B orodispersible films are stable for two weeks at room temperature (25 °C) and up to 1 year in the fridge. Although further toxicological and in vivo efficacy studies are required, this novel Amphotericin B orodispersible films is a promising, physicochemically stable formulation with potential wide application in clinical practice, especially for immunocompromised patients suffering from oropharyngeal candidiasis.

Current and promising novel drug candidates against visceral leishmaniasis

Leishmaniasis is a group of zoonotic diseases caused by a trypanosomatid parasite mostly in impoverished populations of low-income countries. In their different forms, leishmaniasis is prevalent in more than 98 countries all over the world and approximately 360-million people are at risk. Since no vaccine is currently available to prevent any form of the disease, the control strategy of leishmaniasis mainly relies on early case detection followed by adequate pharmacological treatment that may improve the prognosis and can reduce transmission. A handful of compounds and formulations are available for the treatment of leishmaniasis in humans, but only few of them are currently in use since most of these agents are associated with toxicity problems such as nephrotoxicity and cardiotoxicity in addition to resistance problems. In recent decades, very few novel drugs, new formulations of standard drugs or combinations of them have been approved against leishmaniasis. This review highlights the current drugs and combinations that are used medical practice and recent advances in new treatments against leishmaniasis that were pointed out in the recent 2nd Conference, Global Challenges in Neglected Tropical Diseases, held in San Juan, Puerto Rico in June 2018, emphasizing the plethora of new families of molecules that are bridging the gap between preclinical and first-in-man trials in next future.

Niosomal formulation of amphotericin B alone and in combination with glucantime: In vitro and in vivo leishmanicidal effects

This study aimed to evaluate the efficacy of glucantime and amphotericin B (AmB) encapsulated in niosome against cutaneous leishmaniasis (CL) using in vitro and in vivo models. The niosomal formulations of the drugs alone and in combination were prepared and characterized. Subsequent to the examination of their cytotoxicity, their efficacy was evaluated using an in vitro MTT assay, macrophage model, flow cytometry, and gene expression profiling. For evaluation of therapeutic effect of niosomal combination on the lesion induced by Leishmania major in inbred BALB/c mice, the size of lesions and number of parasites in spleen was assessed. The niosomal formulations demonstrated significantly greater inhibitory effects compared with the non-niosomal forms when the IC₅₀ was considered. The niosomal combination showed an increase in the apoptotic values and gene expression levels of IL-12 and metacaspase and a decrease in the levels of IL-10 with a dose-response effect. The niosomal combination was also effective in reducing the lesion size and splenic parasite burden in mice. Our findings indicated that there is a synergistic effect between AmB and glucantime in niosomal form in the inhibition of intracellular and extracellular forms of L. tropica. Additionally, the in vivo results on L. major suggest that topical niosomal formulation could be useful in the treatment of CL.

A Novel Niosomal Combination of Selenium Coupled with Glucantime against Leishmania tropica

There is no effective treatment modality available against different forms of leishmaniasis. Therefore, the aim of this study was to improve the penetration and efficacy of selenium and glucantime coupled with niosomes and compared them with their simple forms alone on in vitro susceptibility assays. In this study, the niosomal formulations of selenium and in combination with glucantime were prepared. The size and morphology of the niosomal formulations were characterized and the effectivity of the new formulation was also evaluated using in vitro MTT assay, intra-macrophage model, and gene expression profile. From the results obtained, no cytotoxicity effect was observed for niosomal and simple forms of drugs, as alone or in combination. Niosomal formulations of the drugs significantly showed more inhibitory effects (P ≤ 0.001) than the simple drugs when the selectivity index was considered. The gene expression levels of Interleukin (IL-10) significantly decreased, while the level of IL-12 and metacaspase significantly increased (P ≤ 0.001). The results of the present study showed that selenium plus glucantime niosome possess a potent anti-leishmanial effect and enhanced their lethal activity as evidenced by the in vitro experiments.

Synthesis and characterization of NH2-(AEEA)n-amphotericin B derivatives

To find novel amphotericin B (AmB) derivatives with high therapeutic potential, low toxicity, and water solubility, a series of nine N-substituted AmB derivatives were evaluated for their antifungal activity using the broth dilution method and for their hemolytic toxicity with sterile defibrinated sheep blood. Qualitative screening of the effect of the derivatives on two reference Candida albicans strains and of their solubility was performed based on the value of n (n is a positive integer), resulting in the identification of an optimal compound, NH₂-(AEEA)₅-AmB (DMR005; AEEA is 8-amino-3,6- dioxaoctanoic acid). Preliminary safety assessments of DMR005 were carried out via the MTT cell viability assay in vitro and acute toxicity assay in vivo. In general, DMR005 not only has higher water solubility and less toxicity than the parent polyene but also retains antifungal potency.

Leishmanicidal effects of amphotericin B in combination with selenium loaded on niosome against Leishmania tropica

The strategy for improving the treatment of leishmaniasis by the World Health Organization, is the development of new drugs and combination therapy. The aim of this survey was to investigate the effect of amphotericin B (AmB) in combination with selenium, in a simple or niosomal form, on Leishmania tropica (L. tropica) by in vitro advanced assays. In this study, a niosomal formulation of AmB with selenium was prepared and characterized based on size and morphology. Using MTT assay, macrophage model, flow cytometry, and qPCR, the cytotoxicity and efficiency of the niosomal formulation and simple form of combination were evaluated. No toxicity was reported for both the niosomal and simple form of the combination. The niosomal formulation significantly showed higher inhibitory effect on the promastigote and amastigote forms of L. tropica than simple combination form. Interleukin (IL)-10 significantly decreased while the level of IL-12 and metacasoase as Th-1 activator significantly increased (P < 0.001). The findings of this study indicated that niosomes are the stable carriers for this combination, easy to produce and provide promising results as an effective formulation in the inhibition of extracellular and intracellular forms of L. tropica in compared with simple combination form.

Permeability Characteristics of a New Antifungal Topical Amphotericin B Formulation with γ-Cyclodextrins

Amphotericin B is a low soluble broad-spectrum antifungal agent. Cyclodextrins can be added to amphotericin formulations to enhance both their solubility and antifungal properties. Semisolid amphotericin formulations containing gamma cyclodextrin (AGCD) were prepared and compared with two reference formulations—one of them without any solubility enhancer (A) and the other with DMSO (ADMSO). Rheological, the permeability through hairless mouse skin and antifungal characteristics of the different formulations were evaluated. All three semisolid formulations show low thixotropy characteristics. ADMSO was the formulation with the least consistency, lowest viscosity, and greatest extensibility. The AGCD formulation had the opposite behavior and had both the greatest consistency and viscosity and the lowest extensibility. The lowest permeability was obtained with the reference A formulation while both AGCD and ADMSO had a similar permeability enhancement. According to the antimicrobial in vitro efficacy trials, the AGCD formulation showed 45–60% more activity than the reference A formulation. It can be concluded that γ-cyclodextrin is a useful excipient to improve the solubility, permeability, and antifungal activity of amphotericin B in semisolid topical formulations.

Host-Directed Drug Therapies for Neglected Tropical Diseases Caused by Protozoan Parasites

The neglected tropical diseases (NTDs) caused by protozoan parasites are responsible for significant morbidity and mortality worldwide. Current treatments using anti-parasitic drugs are toxic and prolonged with poor patient compliance. In addition, emergence of drug-resistant parasites is increasing worldwide. Hence, there is a need for safer and better therapeutics for these infections. Host-directed therapy using drugs that target host pathways required for pathogen survival or its clearance is a promising approach for treating infections. This review will give a summary of the current status and advances of host-targeted therapies for treating NTDs caused by protozoa.

Preparation and Characterization of Spherical Amorphous Solid Dispersion with Amphotericin B

In the present study, new polymer microspheres of amphotericin B (AmB) were prepared by a spray drying technique using cyclodextrin polymers (Poly-CD) to improve the solubility and dissolution of AmB, to prevent in vivo toxic AmB aggregations. Formulations were characterized through scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), thermal analysis, Raman spectroscopy, particle size, drug purity test and in vitro release studies. The analysis indicated that the chemical structure of AmB remained unchanged in the amorphous solid dispersion, but the structure was changed from crystalline to amorphous. AmB was completely release from such optimized formulations in dissolution media in 40 min. This work may contribute to a new generation of spherical amorphous solid dispersion using a cyclodextrin polymer, which has implications for the possibility of drug development for oral utilization or as powder aerosols for pulmonary administration.

Reducing the toxicity of amphotericin B by encapsulation using methoxy poly(ethylene glycol)-b-poly(l-glutamic acid-co-l-phenylalanine)

Amphotericin B (AmB) is an antifungal drug used for serious fungal infections and leishmaniosis. However, its clinical application is limited because of its high toxicity. To resolve this problem, herein we loaded AmB into methoxy poly(ethylene glycol)-b-poly(l-glutamic acid-co-l-phenylalanine) (mPEG-b-P(Glu-co-Phe)) nanoparticles (l-AmB) via electrostatic, hydrophobic and π-π interactions. The l-AmB has excellent stability both in PBS and in plasma and shows a remarkably reduced hemolysis (17.1 ± 1.5%, 6 h) compared to the free AmB (94.2 ± 5.3%, 6 h). The nephrotoxicity of l-AmB is significantly lower than that of free AmB. The maximum tolerance dose (MTD) of l-AmB is 3.0 mg kg-1, which is 3.75 fold that of free AmB (MTD = 0.8 mg kg-1). The antimicrobial activity of the conjugate was retained in vivo, with l-AmB proving to be a more protective treatment for Aspergillus fumigatus infections in mice than AmB alone. These indicate that l-AmB is a formulation of AmB with low side effects.

Self-Assembled Nanomedicines for Anticancer and Antibacterial Applications

Self-assembly strategies have been widely applied in the nanomedicine field, which provide a convenient approach for building various structures for delivery carriers. When cooperating with biomolecules, self-assembly systems have significant influence on the cell activity and life process and could be used for regulating nanodrug activity. In this review, self-assembled nanomedicines are introduced, including materials, encapsulation, and releasing strategies, where self-assembly strategies are involved. Furthermore, as a promising and emerging area for nanomedicine, in situ self-assembly of anticancer drugs and supramolecular antibiotic switches is also discussed about how to regulate drug activity. Selective pericellular assembly can block mass transformation of cancer cells inducing cell apoptosis, and the intracellular assembly can either cause cell death or effectively avoid drug elimination from cytosol of cancer cells because of the assembly-induced retention (AIR) effect. Host-guest interactions of drug and competitive molecules offer reversible regulations of antibiotic activity, which can reduce drug-resistance and inhibit the generation of drug-resistant bacteria. Finally, the challenges and development trend in the field are discussed.

Comparative studies on amphotericin B nanosuspensions prepared by a high pressure homogenization method and an antisolvent precipitation method

Amphotericin B (AmB) is a widely used polyene antifungal agent; however, its poor solubility limits its clinical application. In this study, AmB nanosuspensions were prepared by a high pressure homogenization method (AmB-HPH) and an antisolvent precipitation method (AmB-AP) to improve the drug solubility. To reveal the distinct influences of these two different preparation methods, systematic comparisons of particle size, crystalline state, wettability, in vitro dissolution and in vivo pharmacokinetics on the properties of AmB-HPH and AmB-AP were performed. The results indicated that AmB-AP was in an amorphous state, exhibiting higher saturation solubility and dissolution rate than those of AmB-HPH in the crystalline state. However, the relative bioavailability of AmB-HPH was higher than that of AmB-AP in vivo, which was likely attributed to its better stability. In conclusion, both AmB-HPH and AmB-AP can enhance the solubility and bioavailability of AmB, but the stability of the nanosuspension prepared by the anti-solvent precipitation method should be carefully considered.

Amphotericin B-loaded solid lipid nanoparticles (SLNs) and nanostructured lipid carrier (NLCs): effect of drug loading and biopharmaceutical characterizations

The aim of this study was to further investigate the effect of drug loading, drug entrapment efficiency, the drug release profiles and biopharmaceutical point of views of amphotericin B (AmB) lipid formulations, that is, degree of aggregation by UV-spectroscopy, in vitro hemolytic and antifungal activities. The optimum drug loading was 2.5% by weight corresponded to lipid fraction in formulation. Increasing of the drug entrapment was achieved by blending small amount of phospholipid in solid lipid nanoparticle (SLN) dispersions. All AmB lipid dispersions were less aggregated species and hemolytic response than Fungizone^® indicating that lipid nanoparticles could reduce its toxicity. The sustained release profiles of AmB formulations depended on its aggregated form and entrapment efficiency. Too high AmB loaded (5% w/w) showed a biphasic drug release profile probably due to some amounts of drug deposited on the nanosphere surface including in continuous phase which promptly released. For in vitro antifungal testing, all AmB lipid formulations were equal and more effective than both AmB itself and Fungizone^®. These observations suggested that AmB loaded SLNs, nanostructured lipid carriers and modified SLNs by blending lecithin could enhance AmB solubility, prolong release characteristics, reduce toxicity and improve antifungal activity.

Antileishmanial Activity of Amphotericin B-loaded-PLGA Nanoparticles: An Overview

In recent decades, nanotechnology has made phenomenal strides in the pharmaceutical field, favouring the improvement of the biopharmaceutical properties of many active compounds. Many liposome-based formulations containing antitumor, antioxidant and antifungal compounds are presently on the market and are used daily (for example Doxil^®/Caelyx^® and Ambisome^®). Polymeric nanoparticles have also been used to entrap many active compounds with the aim of improving their pharmacological activity, bioavailability and plasmatic half-life while decreasing their side effects. The modulation of the structural/morphological properties of nanoparticles allows us to influence various technological parameters, such as the loading capacity and/or the release profile of the encapsulated drug(s). Amongst the biocompatible polymers, poly(D,L-lactide) (PLA), poly(D,L-glycolide) (PLG) and their co-polymers poly(lactide-co-glycolide) (PLGA) are the most frequently employed due to their approval by the FDA for human use. The aim of this review is to provide a description of the foremost recent investigations based on the encapsulation of amphotericin B in PLGA nanoparticles, in order to furnish an overview of the technological properties of novel colloidal formulations useful in the treatment of Leishmaniasis. The pharmacological efficacy of the drug after nanoencapsulation will be compared to the commercial formulations of the drug (i.e., Fungizone^®, Ambisome^®, Amphocil^® and Abelcet^®).

Bioactivity, Safety, and Efficacy of Amphotericin B Nanomicellar Aerosols Using Sodium Deoxycholate Sulfate as the Lipid Carrier

We report nanomicelles of amphotericin B (AmB) using various molar ratios of AmB and sodium deoxycholate sulfate (SDCS) for inhalation with improved stability, solubility, bioactivity, and safety. The particle sizes of all aerosolized formulations are expressed as mass median aerodynamic diameter (0.9-1.6 μm), fine particle fraction (70.3-86.5%), and geometric standard deviation (1.4-2.1) which indicated their sizes are appropriate for use as an inhaler. In vitro cytotoxicity studies conducted using respiratory and kidney cell lines demonstrated that the marketed Fungizone^® was toxic to macrophage and embryonic kidney cells and cell viability decreased from 96 to 48% and from 97 to 67%, respectively when the AmB equivalent concentration was increased from 1 to 16 μg/mL. However, AmB-SDCS formulations showed no evidence of toxicity even up to 8 μg/mL compared to Fungizone^®. Minimum inhibitory and fungicidal concentrations were significantly reduced against Cryptococcus neoformans, and Candida albicans. Also, antileishmanial activity significantly improved for AmB-SDCS formulations. There was an evidence of phagocytosis of the AmB-SDCS formulation by alveolar macrophages NR 8383. Molecular modeling studies suggested the role of hydrogen bonding in stabilization of the AmB-SDCS complex. This study indicated that AmB-SDCS nanomicelles can be used to design a safe and cost-effective AmB for inhalation. Graphical abstract ᅟ.

Antifungal Activity of Chitosan-Coated Poly(lactic-co-glycolic) Acid Nanoparticles Containing Amphotericin B

Amphotericin B (AmB) is one of the most used drugs for the treatment of systemic fungal infections; however, the treatment causes several toxic manifestations, including nephrotoxicity and hemolytic anemia. Chitosan-coated poly(lactide-co-glycolide) (PLGA) nanoparticles containing AmB were developed with the aim to decrease AmB toxicity and propose the oral route for AmB delivery. In this work, the antifungal efficacy of chitosan-coated PLGA nanoparticles containing AmB was evaluated in 20 strains of fungus isolates from patients with vulvovaginal candidiasis (01 Candida glabrata and 03 Candida albicans), bloodstream infections (04 C. albicans and 01 C. tropicalis) and patients with urinary tract infection (04 Candida albicans, 02 Trichosporon asahii, 01 C. guilhermondii, 03 C. glabrata) and 01 Candida albicans ATCC 90028. Moreover, the cytotoxicity over erythrocytes was evaluated. The single-emulsion solvent evaporation method was suitable for obtaining chitosan-coated PGLA nanoparticles containing AmB. Nanoparticles were spherical in shape, presented mean particle size about 460 nm, positive zeta potential and encapsulation efficiency of 42%. Moreover, nanoparticles prolonged the AmB release. All the strains were susceptible to plain AmB and nanostructured AmB, according to EUCAST breakpoint version 8.1 (resistant > 1 μg/mL), using broth microdilution method. In C. albicans (urine, blood, and vulvovaginal secretion isolates, and 1 ATCC), the MIC value of AmB-loaded nanoparticles varied from 0.25 to 0.5 μg/mL and EUCAST varied from 0.03 to 0.5 μg/mL. In urine and vulvovaginal secretion isolates of C. glabrata, the MIC value of AmB-loaded nanoparticles varied from 0.25 to 0.5 μg/mL and EUCAST varied from 0.03 to 0.015 μg/mL. In urine isolates of C. guilhermondii, the MIC value of AmB-loaded nanoparticles was 0.12 μg/mL and EUCAST was 0.06 μg/mL. In blood isolates of C. tropicalis, the MIC value of AmB-loaded nanoparticles was 0.5 μg/mL and EUCAST was 0.25 μg/mL. Finally, in urine isolates of T asahii, the MIC value of AmB-loaded nanoparticles was 1 μg/mL and EUCAST varied from 0.5 to 1 μg/mL. In the cytotoxicity assay, plain AmB was highly hemolytic (100% in 24 h) while AmB-loaded chitosan/PLGA nanoparticles presented negligible hemolysis.

Structural insights on biologically relevant cationic membranes by ESR spectroscopy

Cationic bilayers have been used as models to study membrane fusion, templates for polymerization and deposition of materials, carriers of nucleic acids and hydrophobic drugs, microbicidal agents and vaccine adjuvants. The versatility of these membranes depends on their structure. Electron spin resonance (ESR) spectroscopy is a powerful technique that employs hydrophobic spin labels to probe membrane structure and packing. The focus of this review is the extensive structural characterization of cationic membranes prepared with dioctadecyldimethylammonium bromide or diC14-amidine to illustrate how ESR spectroscopy can provide important structural information on bilayer thermotropic behavior, gel and fluid phases, phase coexistence, presence of bilayer interdigitation, membrane fusion and interactions with other biologically relevant molecules.