Structure-stability correlations for imine formation in aqueous solution

Optimized Inhibitors of MDM2 via an Attempted Protein-Templated Reductive Amination

Innovative and efficient hit-identification techniques are required to accelerate drug discovery. Protein-templated fragment ligations represent a promising strategy in early drug discovery, enabling the target to assemble and select its binders from a pool of building blocks. Development of new protein-templated reactions to access a larger structural diversity and expansion of the variety of targets to demonstrate the scope of the technique are of prime interest for medicinal chemists. Herein, we present our attempts to use a protein-templated reductive amination to target protein-protein interactions (PPIs), a challenging class of drug targets. We address a flexible pocket, which is difficult to achieve by structure-based drug design. After careful analysis we did not find one of the possible products in the kinetic target-guided synthesis (KTGS) approach, however subsequent synthesis and biochemical evaluation of each library member demonstrated that all the obtained molecules inhibit MDM2. The most potent library member (Ki =0.095 μm) identified is almost as active as Nutlin-3, a potent inhibitor of the p53-MDM2 PPI.

Supramolecular polymerization provides non-equilibrium product distributions of imine-linked macrocycles

Supramolecular polymerization of imine-linked macrocycles has been coupled to dynamic imine bond exchange within a series of macrocycles and oligomers. In this way, macrocycle synthesis is driven by supramolecular assembly, either into small aggregates supported by π–π interactions, or high-aspect ratio nanotubes stabilized primarily by electrostatic and solvophobic interactions. For the latter, supramolecular polymerization into nanotubes restricts imine exchange, thereby conferring chemical stability to the assemblies and their constituent macrocycles. Competition in the formation and component exchange among macrocycles favored pyridine-2,6-diimine-linked species due to their rapid synthesis, thermodynamic stability, and assembly into high-aspect ratio nanotubes under the reaction conditions. In addition, the pyridine-containing nanotubes inhibit the formation of similar macrocycles containing benzene-1,3-diimine-linkages, presumably by disrupting their assembly and templation. Finally, we exploit rapid imine exchange within weak, low-aspect ratio macrocycle aggregates to carry out monomer exchange reactions to macrocycles bearing pyridine moieties. Once a pyridine-containing dialdehyde has exchanged into a macrocycle, the macrocycle becomes capable of nanotube formation, which dramatically slows further imine exchange. This kinetic trap provides chemically diverse macrocycles that are not attainable by direct synthetic methods. Together these findings provide new insights into coupling supramolecular polymerization and dynamic covalent bond-forming processes and leverages this insight to target asymmetric nanotubes. We envision these findings spurring further research efforts in the synthesis of nanostructures with designed and emergent properties.

Supramolecular polymerization of imine-linked macrocycles has been coupled to dynamic imine bond exchange within a series of macrocycles and oligomers.

Determination of biocatalytic parameters of a copper radical oxidase using real-time reaction progress monitoring

VTNA is applied to reaction progress curves to glean key kinetic and mechanistic details for a copper radical oxidase.

Dehydrogenation and α-functionalization of secondary amines by visible-light-mediated catalysis

A visible-light-mediated process for dehydrogenation of amines has been described. The given protocol showed a broad substrate scope, mild reaction conditions and excellent results without the requirement of tedious purification.

1,2-Addition to trifluoromethylated β-enamino diketones: regioselective synthesis of trifluoromethyl-containing azomethine pyrazoles and isoxazoles

Trifluoromethylated β-enamino diketones undergo type 1,2-addition leading to regioselective synthesis of trifluoromethylated azoles containing an azomethine group.

Synthesis and molecular docking studies of imines as α-glucosidase and α-amylase inhibitors

Imine functionality is found in many compounds with important biological activity. Thus, the development of novel synthetic approaches for imines is important. In this work, it is propose an easy, eco-friendly and straightforward synthesis pathway of aryl imines under microwave irradiation catalyzed by Alumina-sulfuric acid. In addition, the in vitro enzymatic inhibition, antioxidant activity and molecular docking studies were performed. The aryl imines were isolated with yields in the range of 37-94%. All aryl imines synthesized were evaluated for in vitro inhibitory potential against α-glucosidase and α-amylase enzymes and the results exhibited that the most of the compounds displayed inhibitory activity against both enzymes. The (E)-1-(4-nitrophenyl)-N-(pyridin-2-yl)methanimine (3d) was 1.15-fold more active than acarbose against α-amylase whilst the (E)-1-phenyl-N-(pyridin-2-yl)methanimine (3c) displayed similar activity that acarbose against α-glucosidase. The molecular docking studies in α-glucosidase and α-amylase reveal that aryl imines mainly establish an H-bond with the R²-subtituent and hydrophobic interactions with the R¹-subtituent. The docking analysis reveals these synthetic aryl imines 3d-i interact in same active site than acarbose drug in both enzymes.

Aldehyde-conjugated chitosan-graphene oxide glucodynamers: Ternary cooperative assembly and controlled chemical release

Simultaneous condensation of aromatic aldehydes (Ar_xCHO; x = 1-4) on chitosan biopolymer (CS) affords, after water-evaporation, structurally-conjugated aryl-functionalized CS-Ar_x-f films. Similarly, cooperative assembly of two-dimensional nanometric graphene oxide (GO), aromatic aldehyde and chitosan provides transparent, flexible and crack-free aldehyde-functionalized, ternary-reinforced CS-Ar_x-GO-f nanocomposite films. Homogenous films were obtained using ortho-hydroxybenzaldehyde Ar₁ while the para-hydroxybenzaldehyde Ar₄ was prone to packing inside. Textural and mechanical properties were investigated and expectedly, significant improvement was found for CS-Ar₁-GO-f because of the great dispersion of the aromatic and the presence of the filler. The sensitivity of unsaturated CN imine bond to hydrolysis was explored for triggering controlled release of aromatics from the as-prepared films. All of them were found to induce a time-dependent aromatic release. It has been moreover observed that the release was significantly delayed in CS-Ar_x-GO-f compared to CS-Ar_x-f, a fact attributed to the interplay of the ring with the basal and edges of graphene oxide, through π-π stacking and additional hydrogen bonding interactions. This finding shows that beyond the conventional wisdom using fillers for improving thermal and mechanical properties, the tiny carbon sheets can act as a regulator for aldehyde release, thereby providing a way for more controlled chemical delivery from confined nanocomposites.

Selective catecholamine detection in living cells by a copper-mediated oxidative bond cleavage

The development of a new triggered-release system for selective detection of catecholamines in biological samples including living cells is reported. Catecholamines are a class of tightly regulated hormones and neurotransmitters in the human body and their dysregulation is implicated in various neurodegenerative diseases. It is highly challenging to selectively sense and detect catecholamines in a complex biological environment due to their small size, non-specific molecular shape and trivial chemical properties. In this study, a copper-based, catecholamine-triggered oxidation that releases a fluorescent reporter is described. The probe is highly sensitive and selective for detecting changes in catecholamine levels in aqueous buffer, human plasma, and cellular models of neuronal differentiation and Parkinson's disease. This new catecholamine sensing strategy features chemical reactivity as part of small molecule recognition as opposed to the conventional use of a well-designed host for reversible binding.

Ultra-sub-stoichiometric "Dynamic" Bioconjugation Reduces Viscosity by Disrupting Immunoglobulin Oligomerization

Monoclonal antibodies (mAb) are a major focus of the pharmaceutical industry, and polyclonal immunoglobulin G (IgG) therapy is used to treat a wide variety of health conditions. As some individuals require mAb/IgG therapy their entire life, there is currently a great desire to formulate antibodies for bolus injection rather than infusion. However, to achieve the required doses, very concentrated antibody solutions may be required. Unfortunately, mAb/IgG self-assembly at high concentration can produce an unacceptably high viscosity for injection. To address this challenge, this study expands the concept of "dynamic covalent chemistry" to "dynamic bioconjugation" in order to reduce viscosity by interfering with antibody-antibody interactions. Ultra-sub-stoichiometric amounts of dynamic PEGylation agents (down to the nanomolar) significantly reduced the viscosity of concentrated antibody solutions by interfering with oligomerization.

An Asymmetric Reductase That Intercepts Acyclic Imino Acids Produced in Situ by a Partner Oxidase

Acyclic imines are unstable in aqueous conditions. For this reason, known imine reductases, which enable the synthesis of chiral amines, mainly intercept stable cyclic imines. Here we report the detailed biochemical and structural characterization of Bsp5, an imino acid reductase from the d-2-hydroxyacid dehydrogenase family that reduces acyclic imino acids produced in situ by a partner oxidase. We determine a 1.6 Å resolution structure of Bsp5 in complex with d-arginine and coenzyme NADPH. Combined with mutagenesis work, our study reveals the minimal structural constraints for its biosynthetic activity. Furthermore, we demonstrate that Bsp5 can intercept more complex products from an alternate oxidase partner, suggesting that this oxidase-imino acid reductase pair could be evolved for biocatalytic conversion of l-amino acids to d-amino acids.

Designing chitosan based eco-friendly multifunctional soil conditioner systems with urea controlled release and water retention

The paper reports new soil conditioner systems obtained by in situ hydrogelation of chitosan with salicylaldehyde in the presence of urea fertilizer, designed to address both fertilization and water retention of the soil. The new systems were structural, supramolecular and morphological characterized by FTIR spectroscopy, XRD diffraction, POM and SEM microscopy. The rate of urea release has been investigated by NMR analysis and the release mechanism has been assessed by fitting five mathematical models. The formulations showed high water absorbency of 68 g/g, and they induced water holding capacity in soil up to 154% and an increment of the nitrogen content in soil to almost double, leading to a growth of plants with almost 70% higher compared to the reference soil. All these data revealed the new systems as new multifunctional soil conditioner ecoproducts capable to address both fertilizing and water retention issues, with high potential of application for sustainable agriculture.

Imine bond formation: A novel concept to incorporate peptide drugs in self-emulsifying drug delivery systems (SEDDS)

HYPOTHESIS

Because of its hydrophilic character the peptide drug Polymyxin B (PMB) cannot be incorporated in lipophilic nanocarrier systems such as self-emulsifying drug delivery systems (SEDDS) for oral administration. Due to the formation of imine conjugates between the primary amino groups of PMB and the carbonyl group of cinnamaldehyde, however, drug lipophilicity might be sufficiently raised for incorporation in SEDDS.

METHODS

Imine bonds were formed between the primary amino groups of PMB and the carbonyl group of cinnamaldehyde. PMB-cinnamaldehyde conjugate was characterized regarding degree of substitution, log P and release of PMB due to interaction with bovine serum albumin (BSA), SEDDS loading and cell viability.

RESULTS

87.1% of primary amines formed imines with cinnamaldehyde. Log P was increased 69.183 - folds. BSA triggered release of PMB was 45.2%, 64.9% and 80.6% within 16 h. Log D_{SEDDS/Release medium} of PMB-cinnamaldehyde conjugate was 3.4.

CONCLUSION

According to these findings, the concept of imine bond formation with cinnamaldehyde can be considered as a novel concept for increasing lipophilicity of the hydrophilic antibiotic peptide PMB.

Novel Inulin Derivatives Modified with Schiff Bases: Synthesis, Characterization, and Antifungal Activity

In this paper, we report chemical modifications of inulin by seven kinds of aromatic Schiff bases, which are different from their substituent groups. The obtained inulin derivatives were confirmed by FTIR, ¹H NMR, and ¹³C NMR. Then, we studied their antifungal activity against four kinds of plant pathogens involving Botrytis cinerea, Fusarium oxysporum f. sp. cucumerium Owen, Fusarium oxysporum f. sp. niveum, and Phomopsis asparagi by the mycelium growth rate method. The results revealed that all inulin derivatives were endowed with significant antifungal activity compared to inulin. Among them, 6-amino-(N-4-chlorobenzylidene)-6-deoxy-3,4-di-O-acetyl inulin (4CBSAIL) and 6-amino-(N-3,4-dichlorobenzylidene)-6-deoxy-3,4-di-O-acetyl inulin (3,4DCBSAIL), which were synthesized from p-chlorobenzaldehyde and 3,4-dichlorobenzaldehyde, could completely inhibit the growth of the test fungi at 1.0 mg/mL. The inhibitory indices of the inulin derivatives were related to the type, position, and number of substituent groups (halogens) on the Schiff bases. The results confirmed that it was feasible to chemically modify inulin with Schiff bases to confer high antifungal activity to inulin. The products described in this paper have great potential as alternatives to some harmful pesticides used for plant disease control.

A Ru(II) polypyridyl complex bearing aldehyde functions as a versatile synthetic precursor for long-wavelength absorbing photodynamic therapy photosensitizers

The use of Photodynamic Therapy (PDT) for the treatment of several kinds of cancer as well as bacterial, fungal or viral infections has received increasing attention during the last decade. However, the currently clinically approved photosensitizers (PSs) have several drawbacks, including photobleaching, slow clearance from the organism and poor water solubility. To overcome these shortcomings, many efforts have been made in the development of new types of PSs, such as Ru(II) polypyridyl complexes. Nevertheless, most studied Ru(II) polypyridyl complexes have a low absorbance in the spectral therapeutic window. In this work, we show that, by carefully selecting substituents on the polypyridyl complex, it is possible to prepare a complex absorbing at a much higher wavelength. Specifically, we report on the synthesis as well as in-depth experimental and theoretical characterisation of a Ru(II) polypyridyl complex (complex 3) combining a shift in absorbance towards the spectral therapeutic window with a high ¹O₂ production. To overcome the absence or poor selectivity of most approved PSs into targeted cells/bacteria, they can be linked to targeting moieties. In this line, compound 3 was designed with reactive aldehyde groups, which can be used as a highly versatile synthetic precursor for further conjugation. As a proof of concept, 3 was reacted with benzylamine and the stability of the resulting conjugate 4 was investigated in DMSO, PBS and cell media. 4 showed an impressive ability to act as a PDT PS with no measurable dark cytotoxicity and photocytotoxicity in the low micromolar range against cancerous HeLa cells from 450 nm up to 540 nm.

Dynamic Covalent Bonds in Polymeric Materials

Dynamic covalent bonds (DCBs) have received significant attention over the past decade. These are covalent bonds that are capable of exchanging or switching between several molecules. Particular focus has recently been on utilizing these DCBs in polymeric materials. Introduction of DCBs into a polymer material provides it with powerful properties including self-healing, shape-memory properties, increased toughness, and ability to relax stresses as well as to change from one macromolecular architecture to another. This Minireview summarizes commonly used powerful DCBs formed by simple, often "click" reactions, and highlights the powerful materials that can result. Challenges and potential future developments are also discussed.

Overcoming inaccessibility of fluorinated imines - synthesis of functionalized amines from readily available fluoroacetamides

Although imines are convenient substrates for the synthesis of functionalized amines, they may be hard to obtain, as in the case of fluorinated imines. To aid in overcoming this issue, we propose a protocol of corresponding amine synthesis from simple fluoroacetic acid-derived amides using Schwartz's reagent.

Multistep Wavelength Switching of Near-Infrared Photoluminescence Driven by Chemical Reactions at Local Doped Sites of Single-Walled Carbon Nanotubes

Local chemical functionalization is used for defect doping of single-walled carbon nanotubes (SWNTs), to develop near-infrared photoluminescence (NIR PL) properties. We report the multistep wavelength shifting of the NIR PL of SWNTs through chemical reactions at local doped sites tethered to an arylaldehyde group. The PL wavelength of the doped SWNTs is modulated based on imine chemistry. This involves the imine formation of aldehyde groups with added arylamines, imine dissociation reaction, exchange reaction of bound arylamines in the imine, and the Kabachnik-Fields reaction of imine groups using diisopropyl phosphite. Using doped sites as a localized chemical reaction platform can exploit the versatile molecularly driven functionality of carbon nanotubes and related nanomaterials.

Autopoietic Behavior of Dynamic Covalent Amphiphiles

The condensation of aldehydes and amines in water to give amphiphilic imines can lead to a particular autocatalytic behavior known as autopoiesis, in which the closed micellar structure made by the amphiphile at the mesoscale can accelerate the condensation of its constituents. Herein, through a combination of analytical tools, including diffusion ordered spectroscopy (DOSY) as well as light, neutron, and X-ray scattering techniques, the thermodynamic and kinetic parameters were probed at both the level of dynamic covalent imine bond formation and the level of the resulting micellar self-assemblies. It was found that the autopoietic behavior was the result of a combination of several parameters, including solubilization of hydrophobic building blocks, template effect at the core-shell interface, and growth/division cycles of the micellar objects.

Reversible fabrication and self-assembly of a gemini supra-amphiphile driven by dynamic covalent bonds

A smart gemini supra-amphiphile behaving with pH/CO2 dual-sensitive hierarchical self-assembly was fabricated under the effect of dynamic covalent bonds. In the presence of an amino-functionalized cation, water-insoluble terephthalaldehyde, and an amphiphilic anion, the benzoic imine bond can initiate the transformation from a single-tailed supra-amphiphile to a gemini supra-amphiphile with increasing pH, followed by the subsequent evolution from micelles to vesicles. Reversible self-assembly and disassembly of the gemini supra-amphiphile can be realized via CO2/N2 treatment, thus inducing the fission and reversion of vesicles. Interestingly, the flexible nature of supra-amphiphiles allows for the hierarchical assembly of vesicles, leading to the formation of aqueous two-phase systems. Multiple responsive supra-amphiphiles have useful applications in the fabrication of smart supra-molecular materials, including self-healing materials, nanocarriers and chemosensors.

Biomimetic Generation and Remodeling of Phospholipid Membranes by Dynamic Imine Chemistry

Biomimetic liposomes have a wide array of applications in several areas, ranging from medicinal chemistry to synthetic biology. Due to their biocompatibility and biological relevance, there is particular interest in the formation of synthetic phospholipid vesicles and the development of methods to tune their properties in a controlled manner. However, while true biological membranes are capable of responding to environmental stimuli by enzymatically remodeling their composition, synthetic liposomes are typically static once formed. Herein we report the chemoselective reaction of the natural amine-containing lysosphingomyelin with a series of long-chain aldehydes to form imines. This transformation results in the formation of phospholipid liposomes that are in dynamic equilibrium with the aldehyde-amine form. The reversibility of the imine linkage is exploited in the synthesis of vesicles that are capable of responding to external stimuli such as temperature or the addition of small molecules.

Dynameric Frameworks with Aggregation-Induced Emission for Selective Detection of Adenosine Triphosphate

Luminogenic materials with aggregation-induced emission (AIE) have attracted considerable interest for applications. If these systems aggregate, the free rotation of their scaffold is restricted, and as a consequence the photoluminescence increases. Herein, the first experimental observation of a "dynameric effect" on AIE is described. A comparison is made of the AIE of molecular and dynameric sensors that exhibit non-linear turn-on switching of fluorescence upon their interaction with adenosine triphosphate (ATP). Confirmation was obtained from the enhanced ATP detection with multivalent dynameric networks compared with a molecular sensor. The dynamic, reversible behaviour of the imine linkages is critical to produce this enhancement, as a static, imine-reduced, polymeric sensor showed decreased AIE activity. The dynameric frameworks showed selectivity for ATP over adenosine diphosphate, and adenosine monophosphate over guanosine triphosphate or cytidine triphosphate. Together, these results will accelerate the systematic discovery of efficient adaptive biomimetic sensors.

Designing Smart Polymer Conjugates for Controlled Release of Payloads

Incorporating labile bonds inside polymer backbone and side chains yields interesting polymer materials that are responsive to change of environmental stimuli. Drugs can be conjugated to various polymers through different conjugation linkages and spacers. One of the key factors influencing the release profile of conjugated drugs is the hydrolytic stability of the conjugated linkage. Generally, the hydrolysis of acid-labile linkages, including acetal, imine, hydrazone, and to some extent β-thiopropionate, are relatively fast and the conjugated drug can be completely released in the range of several hours to a few days. The cleavage of ester linkages are usually slow, which is beneficial for continuous and prolonged release. Another key structural factor is the water solubility of polymer-drug conjugates. Generally, the release rate from highly water-soluble prodrugs is fast. In prodrugs with large hydrophobic segments, the hydrophobic drugs are usually located in the hydrophobic core of micelles and nanoparticles, which limits the access to the water, hence lowering significantly the hydrolysis rate. Finally, self-immolative polymers are also an intriguing new class of materials. New synthetic pathways are needed to overcome the fact that much of the small molecules produced upon degradation are not active molecules useful for biomedical applications.

Imine-based [2]catenanes in water

We report the efficient condensation of imine-based macrocycles from dialdehyde A and aliphatic diamines B n in pure water. Within the libraries, we identified a family of homologous amphiphilic [2]catenanes, whose self-assembly is primarily driven by the hydrophobic effect. The length and odd-even character of the diamine alkyl linker dictate both the yield and the conformation of the [2]catenanes, whose particular thermodynamic stability further shifts the overall equilibrium in favour of imine condensation. These findings highlight the role played by solvophobic effects in the self-assembly of complex architectures.

CO2-triggered fine tuning of electrical conductivity via tug-of-war between ions

We proposed a novel methodology to tune the conductivity of solutions by exploiting a reversible shift between ions and zwitterions.

Proteintemplat-gesteuerte Fragmentligationen - von der molekularen Erkennung zur Wirkstofffindung

Proteintemplat‐gesteuerte Fragmentligationen sind ein neuartiges Konzept zur Unterstützung der Wirkstofffindung und können dazu beitragen, die Wirksamkeit von Proteinliganden zu verbessern. Es handelt sich dabei um chemische Reaktionen zwischen niedermolekularen Verbindungen (“Fragmenten”), die die Oberfläche eines Proteins als Reaktionsgefäß verwenden, um die Bildung eines Proteinliganden mit erhöhter Bindungsaffinität zu katalysieren. Die Methode nutzt die molekulare Erkennung kleiner reaktiver Fragmente durch die Proteine sowohl zur Assemblierung der Liganden als auch zur Identifizierung bioaktiver Fragmentkombinationen. Chemische Synthese und Bioassay werden dabei in einem Schritt vereint. Dieser Aufsatz diskutiert die biophysikalischen Grundlagen der reversiblen und irreversiblen Fragmentligationen und gibt einen Überblick über die Methoden, mit denen die durch das Proteintemplat gebildeten Ligationsprodukte detektiert werden können. Der chemische Reaktionsraum und aktuelle Anwendungen wie auch die Bedeutung dieses Konzeptes für die Wirkstofffindung werden erörtert.

Protein-Templated Fragment Ligations-From Molecular Recognition to Drug Discovery

Protein-templated fragment ligation is a novel concept to support drug discovery and can help to improve the efficacy of protein ligands. Protein-templated fragment ligations are chemical reactions between small molecules ("fragments") utilizing a protein's surface as a reaction vessel to catalyze the formation of a protein ligand with increased binding affinity. The approach exploits the molecular recognition of reactive small-molecule fragments by proteins both for ligand assembly and for the identification of bioactive fragment combinations. In this way, chemical synthesis and bioassay are integrated in one single step. This Review discusses the biophysical basis of reversible and irreversible fragment ligations and gives an overview of the available methods to detect protein-templated ligation products. The chemical scope and recent applications as well as future potential of the concept in drug discovery are reviewed.

pH Switchable Emulsions Based on Dynamic Covalent Surfactants

Dynamic covalent surfactants were designed to prepare pH switchable emulsions. A dynamic covalent bond between nonamphiphilic building blocks (polyethylenimine (PEI) and benzaldehyde (B)) was introduced to form the dynamic covalent surfactant PEI-B. The dynamic nature of covalent bond in PEI-B was confirmed by ¹H NMR and fluorescence probe analysis. Stable emulsions were successfully prepared with interfacial active PEI-B at pH 7.8 with various water/paraffin oil ratios under sonication. When lowering the pH to 3.5, a complete phase separation was observed as a result of breaking dynamic covalent bond in the interfacial active PEI-B. After tuning the pH back to 7.8, stable emulsion was obtained again due to the reformation of the dynamic covalent bond and hence interfacial active PEI-B. The emulsification and demulsification were dependent on the formation and breaking of dynamic covalent bond in PEI-B. Such pH-triggered emulsification and demulsification can be switched at least three times. Application of dynamic covalent surfactants will open up a novel route for preparing responsive emulsions.

Light-Activated Sensitive Probes for Amine Detection

Our new, simple, and accurate colorimetric method is based on diarylethenes (DAEs) for the rapid detection of a wide range of primary and secondary amines. The probes consist of aldehyde- or ketone-substituted diarylethenes, which undergo an amine-induced decoloration reaction, selectively to give the ring-closed isomer. Thus, these probes can be activated at the desired moment by light irradiation, with a sensitivity that allows the detection of amines at concentrations as low as 10^-6  m in solution. In addition, the practical immobilization of DAEs on paper makes it possible to detect biogenic amines, such as cadaverine, in the gas phase above a threshold of 12 ppbv within 30 seconds.

Simultaneous covalent and noncovalent hybrid polymerizations

Covalent and supramolecular polymers are two distinct forms of soft matter, composed of long chains of covalently and noncovalently linked structural units, respectively. We report a hybrid system formed by simultaneous covalent and supramolecular polymerizations of monomers. The process yields cylindrical fibers of uniform diameter that contain covalent and supramolecular compartments, a morphology not observed when the two polymers are formed independently. The covalent polymer has a rigid aromatic imine backbone with helicoidal conformation, and its alkylated peptide side chains are structurally identical to the monomer molecules of supramolecular polymers. In the hybrid system, covalent chains grow to higher average molar mass relative to chains formed via the same polymerization in the absence of a supramolecular compartment. The supramolecular compartments can be reversibly removed and re-formed to reconstitute the hybrid structure, suggesting soft materials with novel delivery or repair functions.

Crosslinking of Chitosan with Dialdehyde Derivatives of Nucleosides and Nucleotides. Mechanism and Comparison with Glutaraldehyde

In medical and pharmaceutical applications, chitosan is used as a component of hydrogels-macromolecular networks swollen in water. Chemical hydrogels are formed by covalent links between the crosslinking reagents and amino functionalities of chitosan. To date, the most commonly used chitosan crosslinkers are dialdehydes, such as glutaraldehyde (GA). We have developed novel GA like crosslinkers with additional functional groups-dialdehyde derivatives of uridine (oUrd) and nucleotides (oUMP and oAMP)-leading to chitosan-based biomaterials with new properties. The process of chitosan crosslinking was investigated in details and compared to crosslinking with GA. The rates of crosslinking with oUMP, oAMP, and GA were essentially the same, though much higher than in the case of oUrd. The remarkable difference in the crosslinking properties of nucleoside and nucleotide dialdehydes can be clearly attributed to the presence of the phosphate group in nucleotides that participates in the gelation process through ionic interactions with the amino groups of chitosan. Using NMR spectroscopy, we have not observed the formation of aldimine bonds. It can be concluded that the real number of crosslinks needed to cause gelation of chitosan chains may be less than 1%.

Synthesis, Spectroscopic, Structural and Quantum Chemical Studies of a New Imine Oxime and Its Palladium(II) Complex: Hydrolysis Mechanism

In this work, we report synthesis, crystallographic, spectroscopic and quantum chemical studies of a new imine oxime, namely (4-nitro-phenyl)-(1-phenyl-ethylimino)-acetaldehyde oxime (nppeieoH). Spectroscopic and X-ray diffraction studies showed that nppeieoH is hydrolyzed in aqueous solution, forming nitroisonitrosoacetophenone (ninap) and the hydrolysis product binds to Pd(II) to yield [Pd(nppeieo)(ninap)]. The mechanism of the hydrolysis reaction has been theoretically investigated in detail, using density functional theory (DFT) with the B3LYP method. The vibrational and the electronic spectra of nppeieoH and its Pd(II) complex, the HOMO and LUMO analysis, Mulliken atomic charges and molecular electrostatic potential were also performed. The predicted nonlinear optical properties of both compounds are higher than those of urea.

A Long-Chain Alkylation of Dialdehyde Starch to Improve Its Thermal Stability and Hydrophobicity

Hydrophobic dialdehyde starch (HDAS) was synthesized by dialdehyde starch (DAS) and eighteen-alkyl primary amine as the raw material in DMSO. The effect of the reaction conditions on the yield of HDAS was investigated such as catalyst content, reaction temperature, reaction time, and the in-feed molar ratio of -CHO/-NH2. Moreover, the optimized test parameters were obtained by conducting orthogonal experiment. The molecular structure and the morphology of HDAS were characterized via Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM). And the thermal stability and the hydrophobic properties of HDAS were investigated by thermal gravimetric analyzer (TG) and the hydrophobic testing. The results indicate that the yield of HDAS is the highest up to 44.21%, with feed composition 1 : 0.9, reaction temperature 40°C, reaction time 8 h, and acetic acid content 3%. And the introduction of the long-chain alkyl groups into the DAS backbones will ameliorate efficaciously the thermal stability and the hydrophobic properties of DAS, which almost has no effect on the DAS particle size.

Switching biological functionalities of biointerfaces via dynamic covalent bonds

We construct a stimuli responsive biointerface via a dynamic covalent bond that could switch its surface biofunctionalities on demand. The switchability is achieved via reversible attaching/detaching of aldehyde end-functionalized biomacromolecules.