Qualitative and quantitative analysis of low molecular weight compounds by ultraviolet matrix-assisted laser desorption/ionization mass spectrometry using ionic liquid matrices

Aniline/alpha-cyano-4-hydroxycinnamic acid is a highly versatile ionic liquid for matrix-assisted laser desorption/ionization mass spectrometry

The performance of a matrix-assisted laser desorption/ionization (MALDI) ionic liquid matrix (ILM) consisting of alpha-cyano-4-hydroxycinnamic acid (CHCA) and aniline (ANI) was evaluated to assess whether it could offer possible advantages over conventional matrices. Ultraviolet (UV), Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) and laser desorption/ionization mass spectrometry (LDI-MS) experiments were carried out with the aim of confirming the structure of the ANI-CHCA ILM. Different model analytes such as amino acids, peptides, proteins, lipids, phospholipids, synthetic polymers, and sugars were tested. Mass spectra with similar or improved signal-to-noise (S/N) ratio (compared to CHCA) were invariably obtained demonstrating the potential of this ILM as a general purpose matrix. Furthermore, protein identification by peptide mass fingerprinting (PMF) and database search was facilitated compared to CHCA since higher scores and increased sequence coverage were observed. Finally, a complex lipid mixture (i.e. a raw extract of a milk sample) analysed by MALDI-MS showed improved S/N ratio, a reduced chemical noise and a limited formation of matrix-clusters.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2003-2004

This review is the third update of the original review, published in 1999, on the application of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings the topic to the end of 2004. Both fundamental studies and applications are covered. The main topics include methodological developments, matrices, fragmentation of carbohydrates and applications to large polymeric carbohydrates from plants, glycans from glycoproteins and those from various glycolipids. Other topics include the use of MALDI MS to study enzymes related to carbohydrate biosynthesis and degradation, its use in industrial processes, particularly biopharmaceuticals and its use to monitor products of chemical synthesis where glycodendrimers and carbohydrate-protein complexes are highlighted.

The effect of temperature on the stability of compounds used as UV-MALDI-MS matrix: 2,5-dihydroxybenzoic acid, 2,4,6-trihydroxyacetophenone, alpha-cyano-4-hydroxycinnamic acid, 3,5-dimethoxy-4-hydroxycinnamic acid, nor-harmane and harmane

The thermal stability of several commonly used crystalline matrix-assisted ultraviolet laser desorption/ionization mass spectrometry (UV-MALDI-MS) matrices, 2,5-dihydroxybenzoic acid (gentisic acid; GA), 2,4,6-trihydroxyacetophenone (THA), alpha-cyano-4-hydroxycinnamic acid (CHC), 3,5-dimethoxy-4-hydroxycinnamic acid (sinapinic acid; SA), 9H-pirido[3,4-b]indole (nor-harmane; nor-Ho), 1-methyl-9H-pirido[3,4-b]indole (harmane; Ho), perchlorate of nor-harmanonium ([nor-Ho+H]+) and perchlorate of harmanonium ([Ho+H]+) was studied by heating them at their melting point and characterizing the remaining material by using different MS techniques [electron ionization mass spectrometry (EI-MS), ultraviolet laserdesorption/ionization-time-of-flight-mass spectrometry (UV-LDI-TOF-MS) and electrospray ionization-time-of-flight-mass spectrometry (ESI-TOF-MS)] as well as by thin layer chromatography analysis (TLC), electronic spectroscopy (UV-absorption, fluorescence emission and excitation spectroscopy) and 1H nuclear magnetic resonance spectroscopy (1H-NMR). In general, all compounds, except for CHC and SA, remained unchanged after fusion. CHC showed loss of CO2, yielding the trans-/cis-4-hydroxyphenylacrilonitrile mixture. This mixture was unambiguously characterized by MS and 1H-NMR spectroscopy, and its sublimation capability was demonstrated. These results explain the well-known cluster formation, fading (vanishing) and further recovering of CHC when used as a matrix in UV-MALDI-MS. Commercial SA (SA 98%; trans-SA/cis-SA 5:1) showed mainly cis- to-trans thermal isomerization and, with very poor yield, loss of CO2, yielding (3',5'-dimethoxy-4'-hydroxyphenyl)-1-ethene as the decarboxilated product. These thermal conversions would not drastically affect its behavior as a UV-MALDI matrix as happens in the case of CHC. Complementary studies of the photochemical stability of these matrices in solid state were also conducted.

Ionic liquids in analytical chemistry

The role of ionic liquids (ILs) in analytical chemistry is increasing substantially every year. A decade ago there were but a handful of papers in this area of research that were considered curiosities at best. Today, those publications are recognized as seminal articles that gave rise to one of the most rapidly expanding areas of research in chemical analysis. In this review, we briefly highlight early work involving ILs and discuss the most recent advances in separations, mass spectrometry, spectroscopy, and electroanalytical chemistry. Many of the most important advances in these fields depend on the development of new, often unique ILs and multifunctional ILs. A better understanding of the chemical and physical properties of ILs is also essential.

Molecular ions of ionic liquids in the gas phase

Ionic liquids form neutral ion pairs (CA) upon evaporation. The softness of the gas-phase ionization of field ionization has been used to generate "molecular ions," CA(+*), of ionic liquids, most probably by neutralization of the anion. In detail, 1-ethyl-3-methylimidazolium-thiocyanate, [C(6)H(11)N(2)](+) [SCN](-), 1-butyl-3-methylimidazolium-tricyanomethide, [C(8)H(15)N(2)](+) [C(4)N(3)](-), N-butyl-3-methylpyridinium-dicyanamide, [C(10)H(16)N](+) [C(2)N(3)](-), and 1-butyl-1-methylpyrrolidinium-bis[(trifluormethyl)sulfonyl]amide, [C(9)H(20)N](+) [C(2)F(6)NO(4)S(2)](-) were used. The assignment as CA(+*) ions, which has been confirmed by accurate mass measurements and misassignments due to thermal decomposition of the ionic liquids, has been ruled out by field desorption and electrospray ionization mass spectrometry of the residues.

Identification of low molecular weight carbohydrates employing new binary mixtures for matrix-assisted laser desorption/ionisation mass spectrometry

Various energy-absorbing substances, aminopyrazine (AP), 4,4'-azodianiline (ADA), and 1-chloro-4-hydroxyisoquinoline (CHIQ), together with their binary mixtures with existing acidic MALDI matrices were subjected to matrix-assisted laser desorption/ionisation mass spectrometry (MALDI-MS) and evaluated for the analysis of low molecular weight carbohydrates. The newly introduced systems, especially AP and the combination of 2,5-dihydroxybenzoic acid and aminopyrazine (DHB-AP), have solved almost all the existing problems of the generally low sensitivity of carbohydrate analysis and of the strong background noise produced from single acidic matrices. In fact, especially at a mixing ratio of 3:1 (DHB/AP), outstanding results could be achieved, enabling the detection of analytes down to a concentration of 4 fmol/microL with mass accuracy of 37 ppm. The performance of the system was finally proven by analysing dextrins and biological samples each of which showed excellent signal intensity and signal-to-noise ratio.

Liquid injection field desorption/ionization-mass spectrometry of ionic liquids

Ten ionic liquids based on four types of organic cations, C(+) (imidazolium, pyrrolidinium, pyridinium, and phosphonium), combined with various types of anions, A-, were analyzed by liquid injection field desorption/ionization- (LIFDI) mass spectrometry. For the purpose of LIFDI analysis the ionic liquids were dissolved in methanol, acetonitrile or tetrahydrofuran at concentrations of 0.01-0.1 microl mL(-1). The measurements were performed on a double-focusing magnetic sector instrument. In all ionic liquid LIFDI spectra, the intact cation of the compound yielded the base peak accompanied by cluster ions of the general formula [C(2)A](+) and occasionally [C(3)A(2)](+). Tandem mass spectrometry and reconstructed ion chromatograms were employed to reveal the identity of the observed ions. Although limited to positive-ion mode, LIFDI also provided analytical information on the anions due to cluster ion formation. Depending on actual emitter condition and ionic liquid the limit of detection in survey scans was determined to 5-50 pg of ionic liquid.

Rapid and automatic on-plate desalting protocol for MALDI-MS: using imprinted hydrophobic polymer template

A novel protocol of rapid and automatic on-plate desalting (OPD) and peptide concentration for 2-DE-MALDI-MS has been developed by the approach of templating the hydrophobic polymer solution over Kapton-etched mask. For the template technique, small hydrophobic polymer [linear poly(methyl methacrylate) (PMMA), PMMA derivatized with fullerene-C60 (PMMA-C60), linear polystyrene (PSt), or PSt derivatized with fullerene-C60 (PSt-C60)] spots (990 microm od) are patterned at the centers of stainless MALDI plate wells (1400 microm id). Tryptic-peptide solution with no predesalting was dropped onto the central hydrophobic spots, resulting in a concentration of proteolytic peptides on the hydrophobic polymer surface with a reduced spot size. The dried peptide layer was then covered subsequently with over-volume matrix solution, causing the removal of redissolved salts from the spot center to the spot edge by means of a natural "outward flow." The proposed OPD protocol exhibited a dramatic enhancement in S/N up to 850 for 14 fmol BSA digests in the coexistence of 100 mM salts, compared with barely detectable peaks in ordinary way. This analysis has shown that the success rate of identification was increased by two-fold for low abundance proteins in the human liver tissue with no need for the conventional ZipPlate desalting strategy.

High-sensitivity matrix-assisted laser desorption/ionization Fourier transform mass spectrometry analyses of small carbohydrates and amino acids using oxidized carbon nanotubes prepared by chemical vapor deposition as matrix

In matrix-assisted laser desorption/ionization (MALDI) Fourier transform mass spectrometry (FTMS) analyses of small oligosaccharides and amino acids, high sensitivities for oligosaccharides (10 fmol) were obtained by introducing oxidized carbon nanotubes (CNTs) with short and open-end structure as valuable matrix. The CNTs were deposited in porous anodic alumina (PAA) templates by chemical vapor deposition. Transmission electron microscopy (TEM) images show that those CNTs include low levels of amorphous carbon. Thus, the background interference signals generally caused by amorphous carbon powder in CNTs can be reduced effectively. Experiments also confirmed that the FTMS signal intensity of CNTs prepared in PAA template is much lower than that of commercial multi-wall carbon nanotubes (MCNTs). Moreover, the purified process for CNTs with mixed acid (H2SO4 and HNO3) also contributed to the minimization of background. Intense signals corresponding to alkali cation adduct of neutral carbohydrates and amino acids have been acquired. In addition, reliable quantitative analyses for urine and corn root were also achieved successfully. The present work will open a new way to the application of oxidized CNTs as an effective matrix in MALDI MS research.

Shotgun metabolomics approach for the analysis of negatively charged water-soluble cellular metabolites from mouse heart tissue

A shotgun metabolomics approach using MALDI-TOF/TOF mass spectrometry was developed for the rapid analysis of negatively charged water-soluble cellular metabolites. Through the use of neutral organic solvents to inactivate endogenous enzyme activities (i.e., methanol/chloroform/H2O extraction), in conjunction with a matrix having minimal background noise (9-amnioacridine), a set of multiplexed conditions was developed that allowed identification of 285 peaks corresponding to negatively charged metabolites from mouse heart extracts. Identification of metabolite peaks was based on mass accuracy and was confirmed by tandem mass spectrometry for 90 of the identified metabolite peaks. Through multiplexing ionization conditions, new suites of metabolites could be ionized and "spectrometric isolation" of closely neighboring peaks for subsequent tandem mass spectrometric interrogation could be achieved. Moreover, assignments of ions from isomeric metabolites and quantitation of their relative abundance was achieved in many cases through tandem mass spectrometry by identification of diagnostic fragmentation ions (e.g., discrimination of ATP from dGTP). The high sensitivity of this approach facilitated the detection of extremely low abundance metabolites including important signaling metabolites such as IP3, cAMP, and cGMP. Collectively, these results identify a multiplexed MALDI-TOF/TOF MS approach for analysis of negatively charged metabolites in mammalian tissues.

Mass spectrometry for enzyme assays and inhibitor screening: an emerging application in pharmaceutical research

Robust methods that monitor enzyme activity and inhibitor potency are crucial to drug discovery and development. Over the past 20 years, mass spectrometric methods have increasingly been used to measure enzyme activity and kinetics. However, for rapid screening of inhibitory compounds, various forms of fluorescence and chemiluminscence readout have continued to dominate the market. As the sensitivity, speed, and miniaturization of mass spectrometry methods continue to advance, opportunities to couple mass spectrometry with screening will continue to come to the forefront. To appreciate the tremendous potential for MS-based screening assays, it becomes necessary to understand the current state of capabilities in this arena. Thus, this review is intended to capture how mass spectrometry for studying enzymes activity has progressed from simple qualitative questions (i.e., is the product detected?) to quantitative measures of enzyme activity and kinetics and then as a tool for rapidly screening inhibitory compounds as an alternative to current methods of high throughput drug screening.

Mass spectrometry for the quantification of bioactive peptides in biological fluids

The study of pharmacologically active peptides is central to the understanding of disease and development of novel therapies. It would be advantageous to monitor the fate of bioactive peptides in biological fluids and tissues following their in vivo administration (exogenous administration) or the modulation of endogenous factors (e.g., peptide hormones) affected by the administration of a pharmacological agent. Measurement of administered compounds (small molecules) in plasma is a mature field. However, measurement of pharmacologically active peptides presents particular problems for quantitative mass spectrometry, including challenges from selectivity and sensitivity perspectives. Current approaches towards peptide quantification in biological fluids include immunoassays and mass spectrometric techniques. Immunoassays, although sensitive, lack the necessary selectivity for distinction between peptide and metabolites. Modified molecules induced by metabolic transformations (e.g., N- or C-terminal truncation of the peptide) might not be differentiated by the antibody used in the assay, leading to cross-reactivity. However, although it is generally accepted that mass spectrometry is an ideal technique for the quantification of trace levels of analytes in biological fluids, immunological techniques are still characterized by better limits of peptide detection. In this review article, novel mass spectrometric approaches and strategies on peptide quantification will be described. The current capabilities and prospects for advances in this critical area of research will be examined.

Quantitative detection of metabolites using matrix-assisted laser desorption/ionization mass spectrometry with 9-aminoacridine as the matrix

Quantitative detection of metabolites is a highly desirable feature in metabolome analyses. Recently, the successful detection of multiple metabolites using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) in the negative ion mode employing 9-aminoacridine as the organic matrix was reported (Edwards JL, Kennedy RT. Anal. Chem. 2005; 77: 2201-2209). However, there is little information available on quantitative detection of multiple metabolites using MALDI-MS and in particular the influence changes in metabolite levels have on such detections. We investigated this aspect by spiking a synthetic metabolite cocktail (consisting of 39 metabolites including amino acids, organic acids and phospho-metabolites) with five representative metabolites at increasing concentrations, one metabolite at a time, and assessed the signals from replicate determinations. It was possible to detect quantitative changes in the spiked metabolites. Although analyte suppression was observed, it was possible to observe scenarios where the spiked metabolite had little or no influence on the quantitative detection of some metabolites. It appears that the mass spectral response of the metabolite is suppressed only when the spiked chemical species are relatively similar in chemical terms. This suggests that quantitation is possible in scenarios where changes in a specific metabolite or a class of metabolites are monitored following appropriate analyte separation strategies, and that careful interpretations must be made when using the technique for quantitative analysis in unbiased metabolomic approaches.

Identification of carbohydrates by matrix-free material-enhanced laser desorption/ionisation mass spectrometry

Matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF-MS) is a sensitive mass spectrometric technique which utilises acidic materials as matrices for laser energy absorption, desorption and ionisation of analytes. These matrix materials produce background signals particularly in the low-mass range and make the detection and identification of small molecules difficult and nearly impossible. To overcome this problem this paper introduces matrix-free material-enhanced laser desorption/ionisation mass spectrometry (mf-MELDI-MS) for the screening and analysis of small molecules such as carbohydrates. For this purpose, 4,4'-azo-dianiline was immobilised on silica gel enabling the absorption of laser energy sufficient for successful desorption and ionisation of low molecular weight compounds. The particle and pore sizes, the solvent system for suspension and the sample preparation procedures have been optimised. The newly synthesised MELDI material delivered excellent spectra with regard to signal-to-noise ratio and detection sensitivity. Finally, wheat straw degradation products and Salix alba L. plant extracts were analysed proving the high performance and excellent behaviour of the introduced material.

Adduct simplification in the analysis of cyanobacterial toxins by matrix-assisted laser desorption/ionization mass spectrometry

A novel method for simplifying adduct patterns to improve the detection and identification of peptide toxins using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry is presented. Addition of 200 microM zinc sulfate heptahydrate (ZnSO(4) . 7H(2)O) to samples prior to spotting on the target enhances detection of the protonated molecule while suppressing competing adducts. This produces a highly simplified spectrum with the potential to enhance quantitative analysis, particularly for complex samples. The resulting improvement in total signal strength and reduction in the coefficient of variation (from 31.1% to 5.2% for microcystin-LR) further enhance the potential for sensitive and accurate quantitation. Other potential additives tested, including 18-crown-6 ether, alkali metal salts (lithium chloride, sodium chloride, potassium chloride), and other transition metal salts (silver chloride, silver nitrate, copper(II) nitrate, copper(II) sulfate, zinc acetate), were unable to achieve comparable results. Application of this technique to the analysis of several microcystins, potent peptide hepatotoxins from cyanobacteria, is illustrated.

Recent developments in methods and technology for analysis of biological samples by MALDI-TOF-MS

Matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF-MS) is widely used in a variety of fields because it has the characteristics of speed, ease of use, high sensitivity, and wide detectable mass range for obtaining molecular weights and for structural characterization of macromolecules. In this article we summarize recent developments in matrix additives, new matrices, and sample-pretreatment methods using off-probe or on-probe techniques or nanomaterials for MALDI-TOF-MS analysis of biological samples.

Ionic (liquid) matrices for matrix-assisted laser desorption/ionization mass spectrometry-applications and perspectives

A large number of matrix substances have been used for various applications in matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS). The majority of matrices applied in ultraviolet-MALDI MS are crystalline, low molecular weight compounds. A problem encountered with many of these matrices is the formation of hot spots, which lead to inhomogeneous samples, thus leading to increased measurement times and hampering the application of MALDI MS for quantitative purposes. Recently, ionic (liquid) matrices (ILM or IM) have been introduced as a potential alternative to the classical crystalline matrices. ILM are equimolar mixtures of conventional MALDI matrix compounds such as 2,5-dihydroxybenzoic acid (DHB), alpha-cyano-4-hydroxycinnamic acid (CCA) or sinapinic acid (SA) together with organic bases [e.g., pyridine (Py), tributylamine (TBA) or N,N-dimethylethylenediamine (DMED)]. The present article presents a first overview of this new class of matrices. Characteristic properties of ILM, their influence on mass spectrometric parameters such as sensitivity, resolution and adduct formation and their application in the fields of proteome analysis, the measurement of low molecular weight compounds, the use of MALDI MS for quantitative purposes and in MALDI imaging will be presented. Scopes and limitations for the application of ILM are discussed.

Small-molecule MALDI using the matrix suppression effect to reduce or eliminate matrix background interferences

The matrix suppression effect (MSE) can lead to high-quality MALDI mass spectra: strong analyte signals and weak or negligible matrix background peaks. Experiment and theory suggest that MSE should be widespread and, therefore, generally applicable to measurement of low molecular weight (LMW) substances. These are otherwise impractical with MALDI due to interference from matrix. Appropriate conditions for MSE were investigated and tested on a variety of LMW substances. Straightforward and semiautomated interpretation was possible for 87.7% of these. Another 3.5% gave poor MSE due to sodium cationization rather than protonation of the analyte, but interpretation was possible. MALDI imaging shows that MSE varies significantly across a typical sample. Selective data accumulation could further increase the utility of the method. Samples containing more than one analyte were also studied. Analyte-analyte suppression was not found to be excessive, and moderately abundant minority species can be adequately detected.

Nile Red-Adsorbed Gold Nanoparticle Matrixes for Determining Aminothiols through Surface-Assisted Laser Desorption/Ionization Mass Spectrometry

This paper describes the use of Nile Red-adsorbed gold nanoparticles (NRAuNPs) as selective probes and matrixes for the determination of aminothiols through surface-assisted laser desorption/ionization mass spectrometry (SALDI-MS). The binding of three aminothiols-glutathione (GSH), cysteine (Cys), and homocysteine (HCys)-to the surfaces of these NRAuNPs induces their aggregation, which causes asubsequent changes in their color and fluorescence. Because arginine-a non-thiol amino acid-does not induce such aggregation, it is a straightforward process to use the NRAuNPs to selectively concentrate the aminothiols from a solution containing all four of these analytes; we were able to identify the three aminothiols in the precipitate, and arginine in the supernatant, directly through SALDI-MS measurements. Without using this preconcentration approach, the limits of detection (LODs) at a signal-to-noise ratio of 3 were 1.0, 2.0, and 1.3 microM for GSH, Cys, and HCys, respectively. In comparison, selective concentration using the NRAuNPs provided LODs of 25, 54, and 34 nM, for the determinations of GSH, Cys, and HCys, respectively. NRAuNP matrixes provide a number of advantages over the use of conventional organic matrixes (e.g., 2,5-dihydroxybenzoic acid), such as ease of preparation, selectivity, sensitivity, and repeatability. We validated the applicability of our method through the analyses of GSH in red blood cells and of Cys in plasma; we believe that this approach has great potential for diagnosis.

Assessing the properties of internal standards for quantitative matrix-assisted laser desorption/ionization mass spectrometry of small molecules

Growing interest in the ability to conduct quantitative assays for small molecules by matrix-assisted laser desorption/ionization (MALDI) has been the driving force for several recent studies. This present work includes the investigation of internal standards for these analyses using a high-repetition rate MALDI triple quadrupole instrument. Certain physicochemical properties are assessed for predicting possible matches for internal standards for different small molecules. The importance of similar molecular weight of an internal standard to its analyte is seen through experiments with a series of acylcarnitines, having a fixed charge site and growing alkyl chain length. Both acetyl- and hexanoyl-carnitine were systematically assessed with several other acylcarnitine compounds as internal standards. The results clearly demonstrate that closely matched molecular weights between analyte and internal standard are essential for acceptable quantitation results. Using alpha-cyano-4-hydroxycinnamic acid as the organic matrix, the similarities between analyte and internal standard remain the most important parameter and not necessarily their even distribution within the solid sample spot. Several 4-quinolone antibiotics as well as a diverse group of pharmaceutical drugs were tested as internal standards for the 4-quinolone, ciprofloxacin. Quantitative results were shown using the solution-phase properties, log D and pKa, of these molecules. Their distribution coefficients, log D, are demonstrated as a fundamental parameter for similar crystallization patterns of analyte and internal standard. In the end, it was also possible to quantify ciprofloxacin using a drug from a different compound class, namely quinidine, having a similar log D value as the analyte.

Matrix-suppressed laser desorption/ionisation mass spectrometry and its suitability for metabolome analyses

Matrix-assisted laser desorption/ionisation (MALDI) mass spectrometry was investigated for the simultaneous detection of several metabolites, as applicable to global metabolite analysis (metabolomics). The commonly employed organic matrices alpha-cyano-4-hydroxycinnamic acid and 3,5-dihydroxybenzoic acid, in both the crystalline and ionic liquid forms, were investigated. The employment of a low matrix-to-analyte molar ratio suppressed matrix peaks and was effective in detecting all the metabolites with a unique mass in a 30-metabolite synthetic cocktail, albeit to varying degrees. These matrix-suppressed laser desorption/ionisation (MSLDI) analyses were performed in the positive ion mode, and metabolites were detected as the protonated [M+H]+, sodiated [M+Na]+ or potassiated [M+K]+ species. The spectral signals were dominated by basic metabolites. It was possible to detect components of a synthetic cocktail when it was spiked quantitatively into a microbial extract, demonstrating the feasibility of using the technique for detecting metabolite signals in a complex biological matrix. However, analyte suppression effects were noted when the relative proportion of one analyte was allowed to increasingly dominate the others in a mixture. The implications of the findings with respect to applications in metabolomic investigations are discussed.

Improved cell typing by charge-state deconvolution of matrix-assisted laser desorption/ionization mass spectra

Robust, specific, and rapid identification of toxic strains of bacteria and viruses, to guide the mitigation of their adverse health effects and optimum implementation of other response actions, remains a major analytical challenge. This need has driven the development of methods for classification of microorganisms using mass spectrometry, particularly matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS), that allows high-throughput analyses with minimum sample preparation. We describe a novel approach to cell typing based on pattern recognition of MALDI mass spectra, which involves charge-state deconvolution in conjunction with a new correlation analysis procedure. The method is applicable to both prokaryotic and eukaryotic cells. Charge-state deconvolution improves the quantitative reproducibility of spectra because multiply charged ions resulting from the same biomarker attaching a different number of protons are recognized and their abundances are combined. This allows a clearer distinction of bacterial strains or of cancerous and normal liver cells. Improved class distinction provided by charge-state deconvolution was demonstrated by cluster spacing on canonical variate score charts and by correlation analyses. Deconvolution may enhance detection of early disease state or therapy progress markers in various tissues analyzed by MALDI-MS.

Analytical applications of room-temperature ionic liquids: A review of recent efforts

Room-temperature ionic liquids (RTILs) are solvents that may have great potential in chemical analysis. Recent surge in the number of publications/reports/books/monographs clearly indicate an increasing interest of scientific and engineering community toward these exciting and unique solvents. Consequently, a variety of analytical applications of RTILs have started to emerge. This review presents an account of some of the recent reports on RTILs in major subdisciplines of analytical chemistry. Specifically, recent literature representing the applications of RTILs in chromatography, extraction, electroanalytical chemistry, sensing, and spectrometry is reviewed. With a rapid growth in the number of publications on analytical applications of RTILs, it appears that in the near future these neoteric solvents are definitely going to be a permanent feature in analytical chemistry.

Quantification of Peptides for the Monitoring of Protease-Catalyzed Reactions by Matrix-Assisted Laser Desorption/Ionization Mass Spectrometry Using Ionic Liquid Matrixes

Ionic liquid matrixes (ILM) have been shown to allow very homogeneous sample preparations, facilitating relative quantifications using internal standards in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). In the present work, the ability to perform quantifications of peptides without using internal standards in these matrixes was investigated. Linear correlations between peptide amount and signal intensities could be observed when increased molar matrix-to-analyte ratios were applied. The dynamic range of linearity was approximately 1 order of magnitude. The method was applied successfully to monitor the time-dependent evolution of substrates and products in trypsin-catalyzed digests of single peptides and peptide mixtures. Thus, ionic liquid matrixes allow quantitative MALDI-MS without the need for internal standards, making the method a suitable tool for the fast screening of new enzymes or the search for substrates or inhibitors.

Ionic liquid matrices with phosphoric acid as matrix additive for the facilitated analysis of phosphopeptides by matrix-assisted laser desorption/ionization mass spectrometry

Matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) is a powerful tool for the analysis and characterization of protein phosphorylation on the peptide level. In this study, the applicability of ionic liquid matrices (ILM) formed by combination of the crystalline MALDI matrix 2,5-dihydroxybenzoic acid (DHB) with pyridine or n-butylamine was tested for the analysis of phosphopeptides. Low ionization efficiency in both positive and negative ion mode was observed in acid-free sample preparations. Upon addition of 0.1% trifluoroacetic acid (TFA), ion formation was increased, but analogously to the situation described earlier for pure DHB, best results were obtained upon use of 1% phosphoric acid as matrix additive. The samples prepared in this way were significantly more homogeneous than preparations with pure DHB, thus avoiding the need for time-consuming search for hot spots. Other characteristics like metastable fragmentation of phosphopeptides did not differ from that observed in classical preparations. The limits of detection for synthetic phosphopeptides and singly or multiply phosphorylated peptides from tryptic digests of alpha- and beta-casein were comparable with those obtained when using pure DHB; in some cases even higher signal intensities could be observed in the ILM. The use of ILM in combination with 1% phosphoric acid as matrix additive significantly facilitates analysis of phosphopeptides by MALDI-MS.

Ion formation mechanisms in UV-MALDI

Matrix Assisted Laser Desorption/Ionization (MALDI) is a very widely used analytical method, but has been developed in a highly empirical manner. Deeper understanding of ionization mechanisms could help to design better methods and improve interpretation of mass spectra. This review summarizes current mechanistic thinking, with emphasis on the most common MALDI variant using ultraviolet laser excitation. A two-step framework is gaining acceptance as a useful model for many MALDI experiments. The steps are primary ionization during or shortly after the laser pulse, followed by secondary reactions in the expanding plume of desorbed material. Primary ionization in UV-MALDI remains somewhat controversial, the two main approaches are the cluster and pooling/photoionization models. Secondary events are less contentious, ion-molecule reaction thermodynamics and kinetics are often invoked, but details differ. To the extent that local thermal equilibrium is approached in the plume, the mass spectra may be straightforwardly interpreted in terms of charge transfer thermodynamics.

Ionic liquid matrix-induced metastable decay of peptides and oligonucleotides and stabilization of phospholipids in MALDI FTMS analyses

Room-temperature ionic liquid matrices (ILMs) have recently been investigated for use in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) and proven to be advantageous. Literature accounts of ILM performance for biological samples document increased sensitivity and ionization efficiency. These claims have been investigated here, and are supported for MALDI TOF applications to peptides, oligonucleotides, and phospholipids. Peptides and oligonucleotides however, do not behave in the same way when ILMs are used for MALDI FTMS. As reported here, with 3 tesla MALDI FTMS peptides and oligonucleotides fragment readily. These observations contrast with those found for MALDI time-of-flight mass spectrometry. Fragmentation is apparently slower than the time required to accelerate ions in a MALDI TOF mass spectrometer, but is readily observed by MALDI FTMS. Therefore, fragmentation of these molecules must occur on a relatively slow time scale. As trapping time is extended, increased fragmentation of peptides and oligonucleotides is seen. However, phospholipids do not fragment extensively. Furthermore, use of traditional solid matrices causes significant fragmentation for this category of compound but is suppressed by use of ILMs.

Pyridinium-based ionic liquid matrices can improve the identification of proteins by peptide mass-fingerprint analysis with matrix-assisted laser desorption/ionization mass spectrometry

Matrix-assisted laser desorption/ionization mass spectrometry has become an indispensable tool for identification of proteins by peptide mass-fingerprint analysis. Selection of the matrix, addition of matrix additives, and sample-preparation techniques are known to affect the quality of the spectra and hence protein identification. We investigated the effect of pyridine as matrix additive for the commonly used crystalline matrix alpha-cyano-4-hydroxycinnamic acid (CCA), forming a pyridinium based ionic liquid matrix, on the mass spectra of synthetic peptides and tryptic protein digests. Beside the equimolar mixture of CCA and pyridine, the effect of addition of substoichiometric amounts of the base to the acid was tested. Optimum results in terms of signal-to-noise ratios, reduction of chemical noise, and reduced formation of alkali adducts and matrix clusters were observed for the matrix CCA-pyridine in the molar ratio 2:1. The optimized ionic liquid matrix was used for identification of tryptic digests of six model proteins and for identification of a protein extracted from a two-dimensional gel with the proteome of the bacterium Corynebacterium glutamicum, and shown to facilitate protein identification, yielding higher scores and increased sequence coverage compared with pure CCA. Thus CCA-Py 2:1 is a potential alternative for identification and characterization of proteins by peptide mass-fingerprint analysis.

Peptide quantification by matrix-assisted laser desorption ionisation time-of-flight mass spectrometry: Investigations of the cyclotide kalata B1 in biological fluids

A rapid method has been developed for the quantification of the prototypic cyclotide kalata B1 in water and plasma utilizing matrix-assisted laser desorption ionisation time-of-flight (MALDI-TOF) mass spectrometry. The unusual structure of the cyclotides means that they do not ionise as readily as linear peptides and as a result of their low ionisation efficiency, traditional LC/MS analyses were not able to reach the levels of detection required for the quantification of cyclotides in plasma for pharmacokinetic studies. MALDI-TOF-MS analysis showed linearity (R2 > 0.99) in the concentration range 0.05-10 microg/mL with a limit of detection of 0.05 microg/mL (9 fmol) in plasma. This paper highlights the applicability of MALDI-TOF mass spectrometry for the rapid and sensitive quantification of peptides in biological samples without the need for extensive extraction procedures.

Specific background electrolytes for nonaqueous capillary electrophoresis

The use of organic solvents or mixture of solvents in capillary electrophoresis is gaining wider attention. The electroosmotic flow mobility of eight organic solvents (acetonitrile, acetone, dimethylformamide, dimetylsulphoxide, propylene carbonate, methanol, ethanol, n-propanol) and of mixtures of several solvents (methanol-acetonitrile, methanol-propylene carbonate, acetonitrile-propylene carbonate) has been studied. The influence of 1,3-alkylimidazolium salts in different solvents on the separation of different analytes has been investigated. Some of these salts have shown usefulness for matrix-assisted laser desorption ionization matrices and off-line analysis of electrophoresis fractions. It also appears that nonaqueous capillary electrophoresis with 1,3-alkylimidazolium salts as background electrolytes is suitable for separation small inorganic ions.

Liquid ultraviolet matrix-assisted laser desorption/ionization - mass spectrometry for automated proteomic analysis

We have combined several key sample preparation steps for the use of a liquid matrix system to provide high analytical sensitivity in automated ultraviolet -- matrix-assisted laser desorption/ionisation -- mass spectrometry (UV-MALDI-MS). This new sample preparation protocol employs a matrix-mixture which is based on the glycerol matrix-mixture described by Sze et al. The low-femtomole sensitivity that is achievable with this new preparation protocol enables proteomic analysis of protein digests comparable to solid-state matrix systems. For automated data acquisition and analysis, the MALDI performance of this liquid matrix surpasses the conventional solid-state MALDI matrices. Besides the inherent general advantages of liquid samples for automated sample preparation and data acquisition the use of the presented liquid matrix significantly reduces the extent of unspecific ion signals in peptide mass fingerprints compared to typically used solid matrices, such as 2,5-dihydroxybenzoic acid (DHB) or alpha-cyano-hydroxycinnamic acid (CHCA). In particular, matrix and low-mass ion signals and ion signals resulting from cation adduct formation are dramatically reduced. Consequently, the confidence level of protein identification by peptide mass mapping of in-solution and in-gel digests is generally higher.

Quantitation of synthetic polymers using an internal standard by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

MALDI-TOF MS is utilized to perform quantitative analysis on synthetic polymers. Despite the inherent limitations of MALDI, good quantitative results have been obtained in the three sets of experiments described here. An internal standard with similar molecular properties as the analytes is introduced. Plots of relative integrated intensity ratios as a function of theoretical ratios of stoichiometry are drawn based on the results. The satisfactory slopes and correlation coefficients illustrated the practicality of quantitative measurement by MALDI-TOF MS.

Matrix-assisted laser desorption/ionization mass spectrometry for the characterization of ionic liquids and the analysis of amino acids, peptides and proteins in ionic liquids

Ionic liquids are interesting solvents for a number of applications in chemistry and biotechnology. We characterized five different ionic liquids by laser desorption/ionization (LDI) and by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) and studied the analysis of amino acids, peptides and proteins dissolved in these solvents. Signals of both anions and cations of the ionic liquids could be observed both in LDI- and in MALDI-MS. In the latter case, adduct formation between anions and cations of the analytes was observed. Amino acids, peptides and proteins could be analyzed in ionic liquids after addition of matrix substances. Sodium and potassium adducts were not observed in any analysis involving ionic liquids. Low molecular mass compounds and peptides could be analyzed best in the presence of water-immiscible ionic liquids, whereas proteins gave the best results in water-miscible ionic liquids. Optimal analysis conditions such as molar matrix-to-analyte and ionic liquid-to-matrix ratios were determined. Homogeneity of samples in the presence of ionic liquids was reduced compared with classical MALDI preparations. Relative quantitation of amino acids was possible using isotope-labeled internal standards. MALDI-MS thus can be used for the analysis of chemical reactions and the screening of enzyme-catalyzed reactions in ionic liquids and for the analysis of the biocatalysts dissolved in these solvents. Theoretical aspects of ion formation in the presence of ionic liquids both in LDI and MALDI analysis are discussed.

Ionic-liquid matrices for quantitative analysis by MALDI-TOF mass spectrometry

Ionic liquid matrices (ILMs) were tested as MALDI matrices for quantification of oligodeoxynucleotides (ODNs), peptides, and small proteins. Good calibrations with high linearity and reproducibility were achieved over a broad concentration range for all the tested ILMs in spite of their different physical states. However, the standard deviation is higher for ILMs that are solid with visible crystals. The experimental results indicate various ILMs have different sensitivity owing to changes in their cation components. More importantly, we found that the slopes of the calibration curves correlate with the inverse of the peptide molecular weights, presenting an opportunity to predict a priori, the relative sensitivities (slopes of calibration plots) for various analytes that have similar hydrophobicites.