Noble-Metal-Free Electrocatalysts for Oxygen Evolution

Magnetic-Field-Induced Strain Enhances Electrocatalysis of FeCo Alloys on Anode Catalysts for Water Splitting

In water splitting, the oxygen evolution reaction (OER) performance of transition metal alloy catalysts needs to be further improved. To solve this problem, the method of an external magnetic field was used to improve the OER catalytic performance of the alloy catalyst. In this paper, FeCo alloys with different composition ratios were prepared by an arc melting method, and OER catalysts with different compositions were obtained by annealing treatment. Under the action of a magnetic field, all three groups of catalysts showed a better catalytic performance than those without a magnetic field. The overpotentials of Fe35Co65, Fe22Co78 and Fe15Co85 at a current density of 20 mA cm−2 were reduced by 12 mV, 6 mV and 2 mV, respectively. It is found that, due to the magnetostrictive properties of FeCo alloys, the catalyst itself will generate strain under the action of a magnetic field, and the existence of strain may be the main reason for the enhanced OER performance of the magnetic field. Therefore, this work provides a new idea for the development of magnetic material catalysts and a magnetic field to improve the performance of catalysts.

Synergetic Effects of Mixed-Metal Polyoxometalates@Carbon-Based Composites as Electrocatalysts for the Oxygen Reduction and the Oxygen Evolution Reactions

The smart choice of polyoxometalates (POMs) and the design of POM@carbon-based composites are promising tools for producing active electrocatalysts for both the oxygen reduction (ORR) and the oxygen evolution reactions (OER). Hence, herein, we report the preparation, characterization and application of three composites based on doped, multi-walled carbon nanotubes (MWCNT_N6) and three different POMs (Na12[(FeOH2)2Fe2(As2W15O56)2]·54H2O, Na12[(NiOH2)2Ni2(As2W15O56)2]·54H2O and Na14[(FeOH2)2Ni2(As2W15O56)2]·55H2O) as ORR and OER electrocatalysts in alkaline medium (pH = 13). Overall, the three POM@MWCNT_N6 composites showed good ORR performance with onset potentials between 0.80 and 0.81 V vs. RHE and diffusion-limiting current densities ranging from −3.19 to −3.66 mA cm−2. Fe4@MWCNT_N6 and Fe2Ni2@MWCNT_N6 also showed good stability after 12 h (84% and 80% of initial current). The number of electrons transferred per O2 molecule was close to three, suggesting a mixed regime. Moreover, the Fe2Ni2@MWCNT_N6 presented remarkable OER performance with an overpotential of 0.36 V vs. RHE (for j = 10 mA cm−2), a jmax close to 135 mA cm−2 and fast kinetics with a Tafel slope of 45 mV dec−1. More importantly, this electrocatalyst outperformed not only most POM@carbon-based composites reported so far but also the state-of-the-art RuO2 electrocatalyst. Thus, this work represents a step forward towards bifunctional electrocatalysts using less expensive materials.

Heterometallic cobalt(ii) calix[6 and 8]arenes: synthesis, structure and electrochemical activity

Heterometallic cobalt p-tert-butylcalix[6 and 8]arenes have been generated from the in situ reaction of lithium reagents (n-BuLi or t-BuOLi) or NaH with the parent calix[n]arene and subsequent reaction with CoBr₂. The reverse route, involving the addition of in situ generated Li[Co(Ot-Bu)₃] to p-tert-butylcalix[6 and 8]arene, has also been investigated. X-ray crystallography reveals the formation of complicated products incorporating differing numbers of cobalt and lithium or sodium centers, often with positional disorder, as well as, in some cases, the retention of halide. The electrochemical analysis revealed several oxidation events related to the subsequent oxidation of Co(ii) centers and the reduction of the metal cation at negative potentials. Moreover, the electrochemical activity of the phenol moieties of the parent calix[n]arenes resulted in dimerized products or quinone derivatives, leading to insoluble oligomeric products that deposit and passivate the electrode. Preliminary screening for electrochemical proton reduction revealed good activity for a number of these systems. Results suggest that [Co₆Na(NCMe)₆(μ-O)(p-tert-butylcalix[6]areneH)₂Br]·7MeCN (6·7MeCN) is a promising molecular catalyst for electrochemical proton reduction, with a mass transport coefficient, catalytic charge transfer resistance and current magnitude at the catalytic turnover region that are comparable to those of the reference electrocatalyst (Co(ii)Cl₂).

Reactions between p-tert-butylcalix[6 and 8]arenes and lithium or sodium reagents led to complex structures often with positional disorder. Such systems are capable of electrochemical proton reduction.

Single-Source Deposition of Mixed-Metal Oxide Films Containing Zirconium and 3d Transition Metals for (Photo)electrocatalytic Water Oxidation

The fabrication of mixed-metal oxide films holds promise for the development of practical photoelectrochemical catalyst coatings but currently presents challenges in terms of homogeneity, cost, and scalability. We report a straightforward and versatile approach to produce catalytically active zirconium-based films for electrochemical and photoelectrochemical water oxidation. The mixed-metal oxide catalyst films are derived from novel single-source precursor oxide cage compounds containing Zr with first-row transition metals such as Co, Fe, and Cu. The Zr-based film doped with Co on fluorine-doped tin oxide (FTO)-coated glass exhibits the highest electrocatalytic O₂ evolution performance in an alkaline medium and an operational stability above 18 h. The deposition of this film onto a BiVO₄ photoanode significantly enhances its photoelectrochemical activity toward solar water oxidation, lowering the onset potential by 0.12-0.21 V vs reversible hydrogen electrode (RHE) and improving the maximum photocurrent density by ∼50% to 2.41 mA cm^-2 for the CoZr-coated BiVO₄ photoanodes compared to that for bare BiVO₄.

Layered Double Hydroxide Catalysts Preparation, Characterization and Applications for Process Development: An Environmentally Green Approach

The adage of new generation of fine chemicals process is the best process applied in the absence of conventional methods. However, many methods use different reaction parameters, such as basic and acidic catalysts, for example oxidation, reduction, bromination, water splitting, cyanohydrin, ethoxylation, syngas, aldol condensation, Michael addition, asymmetric ring opening of epoxides, epoxidation, Wittig and Heck reaction, asymmetric ester epoxidation of fatty acids, combustion of methane, NOx reduction, biodiesel synthesis, propylene oxide polymerization. Layered Double Hydroxides (LDHs) have received considerable attention due their potential applications in flame retardant and has excellent medicinal property for reducing acidity. These catalysts are characterized using analytical techniques, such as: X-ray diffraction (XRD), Fourier-transform infrared (FT-IR), Raman spectroscopy, Thermogravimetric-Differential Thermal Analyzer (TG-DTA), Scanning electron microscope (SEM), Transmission electron microscopes (TEM), Brunauer-Emmett-Teller (BET) surface area, N2 Adsorption-desorption, Temperature programmed reduction (TPR), X-ray photoelectrons spectroscopy (XPS), which gives its overall picture of its structure, porosity, morphology, thermal stability, reusability, and activity of catalysts. LDHs catalysts have proven to be economic and environmentally friendly. The above discussed applications make these catalysts unique from Green Chemistry point of view since they are reusable, and eco-friendly catalysts. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Influence of Fe-clustering on the water oxidation performance of two-dimensional layered double hydroxides

Among the two-dimensional (2D) materials family, layered double hydroxides (LDHs) represent a key member due to their unparalleled chemical versatility. In particular, Fe-based LDHs are distinguished candidates due to their high efficiency as oxygen evolution reaction (OER) electrocatalysts. Herein, we have selected MgFe-based LDH phases as model systems in order to decipher whether Fe-clustering exerts an effect on the OER performance. For that, we have optimized hydrothermal synthesis by using triethanolamine (TEA) as the chelating agent. The magnetic characterisation allows us to identify the Fe-clustering degree by following both magnetic susceptibility as well as magnetization values at 2 K. Thanks to this, we demonstrated that TEA induces an increment in Fe-clustering. Electrochemical OER measurements show that both samples behave identically by using glassy carbon electrodes. Interestingly, when the samples are tested in the most commonly employed electrode, nickel foam, striking differences arise. The sample exhibiting a lower Fe-clustering behaves as a better electrocatalyst with a reduction of the overpotential values of more than 50 mV to reach 100 mA cm^-2, as a consequence of a favoured surface transformation of MgFe-LDHs phases into more reactive oxyhydroxide NiFe-based phases during the electrochemical tests. Hence, this work alerts about the importance of the electrocatalyst-electrode collector interactions which can induce misinterpretations in the OER performance.

Electrocatalytic Water Splitting: From Harsh and Mild Conditions to Natural Seawater

Electrocatalytic water splitting is regarded as the most effective pathway to generate green energy-hydrogen-which is considered as one of the most promising clean energy solutions to the world's energy crisis and climate change mitigation. Although electrocatalytic water splitting has been proposed for decades, large-scale industrial hydrogen production is hindered by high electricity cost, capital investment, and electrolysis media. Harsh conditions (strong acid/alkaline) are widely used in electrocatalytic mechanism studies, and excellent catalytic activities and efficiencies have been achieved. However, the practical application of electrocatalytic water splitting in harsh conditions encounters several obstacles, such as corrosion issues, catalyst stability, and membrane technical difficulties. Thus, the research on water splitting in mild conditions (neutral/near neutral), even in natural seawater, has aroused increasing attention. However, the mechanism in mild conditions or natural seawater is not clear. Herein, different conditions in electrocatalytic water splitting are reviewed and the effects and proposed mechanisms in the three conditions are summarized. Then, a comparison of the reaction process and the effects of the ions in different electrolytes are presented. Finally, the challenges and opportunities associated with direct electrocatalytic natural seawater splitting and the perspective are presented to promote the progress of hydrogen production by water splitting.

Shining Light on Anion-Mixed Nanocatalysts for Efficient Water Electrolysis: Fundamentals, Progress, and Perspectives

This review introduces recent advances of various anion-mixed transition metal compounds (e.g., nitrides, halides, phosphides, chalcogenides, (oxy)hydroxides, and borides) for efficient water electrolysis applications in detail. The challenges and future perspectives are proposed and analyzed for the anion-mixed water dissociation catalysts, including polyanion-mixed and metal-free catalyst, progressive synthesis strategies, advanced in situ characterizations, and atomic level structure-activity relationship. Hydrogen with high energy density and zero carbon emission is widely acknowledged as the most promising candidate toward world's carbon neutrality and future sustainable eco-society. Water-splitting is a constructive technology for unpolluted and high-purity H₂ production, and a series of non-precious electrocatalysts have been developed over the past decade. To further improve the catalytic activities, metal doping is always adopted to modulate the 3d-electronic configuration and electron-donating/accepting (e-DA) properties, while for anion doping, the electronegativity variations among different non-metal elements would also bring some potential in the modulations of e-DA and metal valence for tuning the performances. In this review, we summarize the recent developments of the many different anion-mixed transition metal compounds (e.g., nitrides, halides, phosphides, chalcogenides, oxyhydroxides, and borides/borates) for efficient water electrolysis applications. First, we have introduced the general information of water-splitting and the description of anion-mixed electrocatalysts and highlighted their complementary functions of mixed anions. Furthermore, some latest advances of anion-mixed compounds are also categorized for hydrogen and oxygen evolution electrocatalysis. The rationales behind their enhanced electrochemical performances are discussed. Last but not least, the challenges and future perspectives are briefly proposed for the anion-mixed water dissociation catalysts.

Interfacial engineering of a tri-phase CoFe/CoFeOx/Co–Fe3O4 electrocatalyst for promoting the oxygen evolution reaction

A tri-phase interfacial structure of CoFe alloy/CoFe oxide/cobalt-doped iron oxide as a highly efficient and cost-effective oxygen evolution reaction electrocatalyst was elaborately constructed by a one-step chemical bath deposition approach.

In situ generation of Ni/Fe hydroxide layers by anodic etching of a Ni/Fe film for efficient oxygen evolution reaction

A Ni/Fe hydroxide electrocatalyst was fabricated via a simple and easily controlled method by combining anodic fluoridation and cyclic voltammetry (CV) treatment as an efficient catalyst for the OER.

Direct Conversion of Solid g-C3N4 into Metal-ended N-doped Carbon Nanotubes for Rechargeable Zn-Air Batteries

Developing low-cost and bifunctional electrocatalysts with activity for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is great desirable for metal-air battery. Herein, we demonstrate an approach to realize...

Facile fabrication of ultrafine CoNi alloy nanoparticles supported on hexagonal N-doped carbon/Al2O3 nanosheets for efficient protein adsorption and catalysis

C–CoNi/@Al2O3 nanosheets were well constructed with CoAl-LDH nanosheets as a precursor, and exhibited excellent performance as both a catalyst and an adsorbent.

Different nanostructured CoP microcubes derived from metal formate frameworks with enhanced oxygen evolution reaction performance

Different nanostructured CoP microcubes derived from metal formate frameworks with enhanced oxygen evolution reaction performance.

Stabilizing Hydrous β-NiOOH for Efficient Electrocatalytic Water Oxidation by Integrating Y and Co into Amorphous Ni-Based Nanoparticles

A two-stage ball milling process was used to synthesize amorphous Ni_79.2Nb_12.5Y_8.3 and Ni_74.2Co₅Nb_12.5Y_8.3 nanoparticles from elemental powders. The two-stage ball milling process provides a scalable and industrially applicable method for producing non-metalloid amorphous nanoparticles. The amorphous nanoparticles displayed excellent catalytic performance toward the oxygen evolution reaction (OER) in 1 M KOH, displaying lower overpotentials than IrO₂ at 10 mA cm^-2. The addition of Co in the amorphous alloy reduced the overpotential to 288 mV at 10 mA cm^-2. The pairing of X-ray photoelectron spectroscopy and in situ X-ray absorption spectroscopy revealed that the improved OER activity of amorphous Ni_74.2Co₅Nb_12.5Y_8.3 was attributed to the catalytic synergy between Y and Co. The integration of Y supported proton-coupled electron-transfer processes that assisted with the electrostatic adsorption of OH^- and formation of oxyhydroxide species, while Co sites enabled metal-oxo bonding to prevent Ni overcharging and the stabilization of β-NiOOH. The catalytic synergy between Y and Co reduces the amount of Co needed to enhance the OER activity of Ni-based alloys and lessens the dependence on Co, which is in high demand in many renewable energy and storage applications.

Structural Variations of Metal Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Electrocatalytic oxygen evolution reaction (OER), an important electrode reaction in electrocatalytic and photoelectrochemical cells for a carbon-free energy cycle, has attracted considerable attention in the last few years. Metal oxides have been considered as good candidates for electrocatalytic OER because they can be easily synthesized and are relatively stable during the OER process. However, inevitable structural variations still occur to them due to the complex reaction steps and harsh working conditions of OER, thus impending the further insight into the catalytic mechanism and rational design of highly efficient electrocatalysts. The aim of this review is to disclose the current research progress toward the structural variations of metal oxide-based OER electrocatalysts. The origin of structural variations of metal oxides is discussed. Based on some typical oxides performing OER activity, the external and internal factors that influence the structural stability are summarized and then some general approaches to regulate the structural variation process are provided. Some operando methods are also concluded to monitor the structural variation processes and to identify the final active structure. Additionally, the unresolved problems and challenges are presented in an attempt to get further insight into the mechanism of structural variations and establish a rational structure-catalysis relationship.

Mesoporous WCx Films with NiO-Protected Surface: Highly Active Electrocatalysts for the Alkaline Oxygen Evolution Reaction

Metal carbides are promising materials for electrocatalytic reactions such as water electrolysis. However, for application in catalysis for the oxygen evolution reaction (OER), protection against oxidative corrosion, a high surface area with facile electrolyte access, and control over the exposed active surface sites are highly desirable. This study concerns a new method for the synthesis of porous tungsten carbide films with template-controlled porosity that are surface-modified with thin layers of nickel oxide (NiO) to obtain active and stable OER catalysts. The method relies on the synthesis of soft-templated mesoporous tungsten oxide (mp. WOx ) films, a pseudomorphic transformation into mesoporous tungsten carbide (mp. WCx ), and a subsequent shape-conformal deposition of finely dispersed NiO species by atomic layer deposition (ALD). As theoretically predicted by density functional theory (DFT) calculations, the highly conductive carbide support promotes the conversion of Ni2+ into Ni3+ , leading to remarkably improved utilization of OER-active sites in alkaline medium. The obtained Ni mass-specific activity is about 280 times that of mesoporous NiOx (mp. NiOx ) films. The NiO-coated WCx catalyst achieves an outstanding mass-specific activity of 1989 A gNi -1 in a rotating-disc electrode (RDE) setup at 25 °C using 0.1 m KOH as the electrolyte.

Fascinating Tin Effects on the Enhanced and Large-Current-Density Water Splitting Performance of Sn-Ni(OH)2

Ni(OH)₂-based materials are widely studied in oxygen evolution reaction (OER), but no related synthesis, electrocatalytic application, or theoretical analysis of Sn⁴⁺-doped Ni(OH)₂ has been reported. In this work, Sn-Ni(OH)₂ with a homogeneously distributed nanosheet array was synthesized through a one-step hydrothermal process. It displays a hugely enhanced catalytic activity compared to undoped Ni(OH)₂ throughout the OER and hydrogen evolution reaction (HER) processes. The overpotentials at 100 mA cm^-2 of Sn-Ni(OH)₂ are 312 mV (OER) and 298 mV (HER), which are lower than the corresponding 396 and 427 mV of Ni(OH)₂, respectively. In addition, Sn-Ni(OH)₂ can deliver stable large current densities (at ≈500 and ≈1000 mA cm^-2) for the long-term (>100 h) chronoamperometry testing. Moreover, Sn-Ni(OH)₂ illustrates catalytic activity comparable to that of a commercial Pt/C||RuO₂ electrode pair during the overall water splitting course. Both experimental phenomena and relevant computed theoretical data confirm that the enhanced water splitting activity is mainly due to the introduced Sn⁴⁺ site, which acts as the active center activates the nearby Ni sites during the OER, while acting as the most active reaction site that participates in the HER. Although the doped Sn⁴⁺ has two different effects on OER and HER proceedings, water splitting performance of Sn-Ni(OH)₂ has been conspicuously improved.

Engineering Self-Reconstruction via Flexible Components in Layered Double Hydroxides for Superior-Evolving Performance

Most transition metal-based catalysts for electrocatalytic oxygen evolution reaction (OER) undergo surface reconstruction to generate real active sites favorable for high OER performance. Herein, how to use self-reconstruction as an efficient strategy to develop novel and robust OER catalysts by designing pre-catalysts with flexible components susceptible to OER conditions is proposed. The NiFe-based layered double hydroxides (LDHs) intercalated with resoluble molybdate (MoO₄ ^2- ) anions in interlayers are constructed and then demonstrated to achieve complete electrochemical self-reconstruction (ECSR) into active NiFe-oxyhydroxides (NiFeOOH) beneficial to alkaline OER. Various ex situ and in situ techniques are used to capture structural evolution process including fast dissolution of MoO₄ ^2- and deep reconstruction to NiFeOOH upon simultaneous hydroxyl invasion and electro-oxidation. The obtained NiFeOOH exhibits an excellent OER performance with an overpotential of only 268 mV at 50 mA cm^-1 and robust durability over 45 h, much superior to NiFe-LDH and commercial IrO₂ benchmark. This work suggests that the ECSR engineering in component-flexible precursors is a promising strategy to develop highly active OER catalysts for energy conversion.

Carbon-Based Composites as Electrocatalysts for Oxygen Evolution Reaction in Alkaline Media

This review paper presents the most recent research progress on carbon-based composite electrocatalysts for the oxygen evolution reaction (OER), which are of interest for application in low temperature water electrolyzers for hydrogen production. The reviewed materials are primarily investigated as active and stable replacements aimed at lowering the cost of the metal electrocatalysts in liquid alkaline electrolyzers as well as potential electrocatalysts for an emerging technology like alkaline exchange membrane (AEM) electrolyzers. Low temperature electrolyzer technologies are first briefly introduced and the challenges thereof are presented. The non-carbon electrocatalysts are briefly overviewed, with an emphasis on the modes of action of different active phases. The main part of the review focuses on the role of carbon–metal compound active phase interfaces with an emphasis on the synergistic and additive effects. The procedures of carbon oxidative pretreatment and an overview of metal-free carbon catalysts for OER are presented. Then, the successful synthesis protocols of composite materials are presented with a discussion on the specific catalytic activity of carbon composites with metal hydroxides/oxyhydroxides/oxides, chalcogenides, nitrides and phosphides. Finally, a summary and outlook on carbon-based composites for low temperature water electrolysis are presented.

From NiMoO4 to γ-NiOOH: Detecting the Active Catalyst Phase by Time Resolved in Situ and Operando Raman Spectroscopy

Water electrolysis powered by renewable energies is a promising technology to produce sustainable fossil free fuels. The development and evaluation of effective catalysts are here imperative; however, due to the inclusion of elements with different redox properties and reactivity, these materials undergo dynamical changes and phase transformations during the reaction conditions. NiMoO4 is currently investigated among other metal oxides as a promising noble metal free catalyst for the oxygen evolution reaction. Here we show that at applied bias, NiMoO4·H2O transforms into γ-NiOOH. Time resolved operando Raman spectroscopy is utilized to follow the potential dependent phase transformation and is collaborated with elemental analysis of the electrolyte, confirming that molybdenum leaches out from the as-synthesized NiMoO4·H2O. Molybdenum leaching increases the surface coverage of exposed nickel sites, and this in combination with the formation of γ-NiOOH enlarges the amount of active sites of the catalyst, leading to high current densities. Additionally, we discovered different NiMoO4 nanostructures, nanoflowers, and nanorods, for which the relative ratio can be influenced by the heating ramp during the synthesis. With selective molybdenum etching we were able to assign the varying X-ray diffraction (XRD) pattern as well as Raman vibrations unambiguously to the two nanostructures, which were revealed to exhibit different stabilities in alkaline media by time-resolved in situ and operando Raman spectroscopy. We advocate that a similar approach can beneficially be applied to many other catalysts, unveiling their structural integrity, characterize the dynamic surface reformulation, and resolve any ambiguities in interpretations of the active catalyst phase.

Direct One-Step Growth of Bimetallic Ni2Mo3N on Ni Foam as an Efficient Oxygen Evolution Electrocatalyst

A simple and economical synthetic route for direct one-step growth of bimetallic Ni2Mo3N nanoparticles on Ni foam substrate (Ni2Mo3N/NF) and its catalytic performance during an oxygen evolution reaction (OER) are reported. The Ni2Mo3N/NF catalyst was obtained by annealing a mixture of a Mo precursor, Ni foam, and urea at 600 °C under N2 flow using one-pot synthesis. Moreover, the Ni2Mo3N/NF exhibited high OER activity with low overpotential values (336.38 mV at 50 mA cm-2 and 392.49 mV at 100 mA cm-2) and good stability for 5 h in Fe-purified alkaline electrolyte. The Ni2Mo3N nanoparticle surfaces converted into amorphous surface oxide species during the OER, which might be attributed to the OER activity.

Synthesis of Free-Standing Silver Foam via Oriented and Additive Nanojoining

Silver foams with high porosity and electrical conductivity have many potential applications in energy storage, catalysis, and fuel cells. However, its application is largely hindered by the low efficiency of complicated synthesis processes. In this work, a facile and rapid bottom-up fabrication of silver foams in an aqueous solution allowing large-scale production through oriented and additive nanojoining of silver nanoplate building blocks is reported. Self-assembling of as-grown silver nanoplates facilitates the oriented nanoscale joining to align the atomic lattice, and the local additive of silver promotes diffusion and interconnection at room temperature to realize a rapid synthesis process. The freeze-dried silver foam exhibits a porosity of 95.45%, an ultralow density of 61 mg·cm^-3, low thermal conductivity of 0.29 W·m^-1·K^-1, and high electrical conductivity of 8086 S·m^-1. This oriented and locally additive nanojoining process presents a new strategy to fabricate silver foams that may also inspire the fabrications of other metal foams.

Enhancing the electrocatalytic activity and stability of Prussian blue analogues by increasing their electroactive sites through the introduction of Au nanoparticles

Prussian blue analogues (PBAs) have been proven as excellent Earth-abundant electrocatalysts for the oxygen evolution reaction (OER) in acidic, neutral and alkaline media. Further improvements can be achieved by increasing their electrical conductivity, but scarce attention has been paid to quantify the electroactive sites of the electrocatalyst when this enhancement occurs. In this work, we have studied how the chemical design influences the specific density of electroactive sites in different Au-PBA nanostructures. Thus, we have first obtained and fully characterized a variety of monodisperse core@shell hybrid nanoparticles of Au@PBA (PBA of Ni^IIFe^II and Co^IIFe^II) with different shell sizes. Their catalytic activity is evaluated by studying the OER, which is compared to pristine PBAs and other Au-PBA heterostructures. By using the coulovoltammetric technique, we have demonstrated that the introduction of 5-10% of Au in weight in the core@shell leads to an increase in the electroactive mass and thus, to a higher density of active sites capable of taking part in the OER. This increase leads to a significant decrease in the onset potential (up to 100 mV) and an increase (up to 420%) in the current density recorded at an overpotential of 350 mV. However, the Tafel slope remains unchanged, suggesting that Au reduces the limiting potential of the catalyst with no variation in the reaction kinetics. These improvements are not observed in other Au-PBA nanostructures mainly due to a lower contact between both compounds and the Au oxidation. Hence, an Au core activates the PBA shell and increases the conductivity of the resulting hybrid, while the PBA shell prevents Au oxidation. The strong synergistic effect existing in the core@shell structure evidences the importance of the chemical design for preparing PBA-based nanostructures exhibiting better electrocatalytic performances and higher electrochemical stabilities.

Cobalt coordination controlled carbon nanospheres formation and inclusion of amorphous Co3O4 and AuNPs: strongly enhanced oxygen evolution reaction with excellent mass activity

Carbon nanospheres integrated with AuNPs and amorphous Co3O4 were fabricated by making use of cobalt coordination with AuNP surface ligands, which exhibited an enhanced oxygen evolution reaction (OER) with excellent mass activity. Co2+ coordination with AuNP surface functional molecules significantly influenced the nanostructure formation and OER activity. Nanospheres of carbon with an optimum concentration of AuNPs and Co3O4 (2) showed strong OER activity. 2 exhibited a high current density (358 mA cm-2 at an applied potential of 1.59 V) and required a low overpotential (256 mV) to generate a geometric current density (10 mA cm-2) compared to commercial RuO2 (363 mV). Importantly, 2 showed high mass activity (1352.5 mA mg-1), 14 times higher than RuO2 (93.87 mA mg-1). The low Tafel slope (52.4 mV dec-1) and charge transfer resistance along with large double layer capacitance (Cdl = 20.1) of 2 suggest strong electronic communication between the catalyst and the electrode surface and facilitated fast charge transport. Chronoamperometric studies confirmed the excellent stability of the catalyst. The present work demonstrates that the electrocatalytic activity of earth-abundant amorphous metal oxides can be strongly enhanced by integrating metallic nanoparticles (NPs) and optimizing nanostructures.

Progress of Nonprecious-Metal-Based Electrocatalysts for Oxygen Evolution in Acidic Media

Water oxidation, or the oxygen evolution reaction (OER), which combines two oxygen atoms from two water molecules and releases one oxygen molecule, plays the key role by providing protons and electrons needed for the hydrogen generation, electrochemical carbon dioxide reduction, and nitrogen fixation. The multielectron transfer OER process involves multiple reaction intermediates, and a high overpotential is needed to overcome the sluggish kinetics. Among the different water splitting devices, proton exchange membrane (PEM) water electrolyzer offers greater advantages. However, current anode OER electrocatalysts in PEM electrolyzers are limited to precious iridium and ruthenium oxides. Developing highly active, stable, and precious-metal-free electrocatalysts for water oxidation in acidic media is attractive for the large-scale application of PEM electrolyzers. In recent years, various types of precious-metal-free catalysts such as carbon-based materials, earth-abundant transition metal oxides, and multiple metal oxide mixtures have been investigated and some of them show promising activity and stability for acidic OER. In this review, the thermodynamics of water oxidation, Pourbaix diagram of metal elements in aqueous solution, and theoretical screening and prediction of precious-metal-free electrocatalysts for acidic OER are first elaborated. The catalytic performance, reaction kinetics, and mechanisms together with future research directions regarding acidic OER are summarized and discussed.

Do multinuclear 3d metal catalysts achieve O-O bond formation via radical coupling or via water nucleophilic attack? WNA leads the way in [Co4O4]n

Catalytic water oxidation is a required process for clean energy production based on the concept of artificial photosynthesis. Here, we provide in situ spectroscopic and computational analysis for the closest known photosystem II analog, [Co₄O₄]ⁿ⁺ ([Co₄O₄Py₄Ac₄]⁰, Py = pyridine and Ac = CH₃COO^-), which catalyzes electrochemical water oxidation. In situ extended X-ray absorption fine structure detects an ultrashort, Co^IV=O (~1.67 Å) moiety, a crucial intermediate for O-O bond formation. Density function theory analyses show that the intermediate has two Co^IV centers and a Co^IV=O unit of strong radicaloid character sufficient to support a Co^IV=O + H₂O = Co-OOH + H⁺ transition, where the carboxyl ligand accepts the proton and the bridging oxygen stabilizes the peroxide via hydrogen bonding. The proposed water nucleophilic attack mechanism accounts for all prior spectroscopic evidence on the Co₄O₄⁴⁺ core. Our results are important for the design and development of efficient water oxidation catalysts, which contribute to the ultimate goal of clean energy from artificial photosynthesis.

Constructing ultrathin FeS/FeOxH@Fe nano-sheets for highly efficient oxygen evolution reaction

Exploring earth-abundant catalysts with ultra-high activity and durability are the decisive challenges for oxygen evolution reaction. This work prepared the FeS/FeO_xH@Fe nanosheets as the efficient and stable electrocatalysts of oxygen evolution reaction (OER) through a simple one-step co-deposition method. The FeS/FeO_xH@Fe exhibited small overpotentials of 245, 376 and 482 mV at the current density of 10, 500 and 1000 mA cm^-2 without iR-compensations in 1.0 M KOH solution, respectively. Constructing amorphous structure and the interface between amorphous and crystal can obviously improve the conductivity of FeO_xH, which is beneficial to the improvement of catalytic performance. This work may provide an effective and controlled strategy to design highly active OER catalysts with an interface structure between amorphous and crystal by a well-designed co-deposition.

Influence of the Amount of Carbon during the Synthesis of LaFe0.8Co0.2O3/Carbon Hybrid Material in Oxygen Evolution Reaction

The oxygen evolution reaction (OER) and the hydrogen evolution reaction occurred at the anode and cathode, which depends on the electronic structure, morphology, electrochemically active surface area, and charge-transfer resistance of the electrocatalyst. Transition metals like cobalt, nickel, and iron have better OER and oxygen reduction reaction activities. At the same time, transition-metal oxide/carbon hybrid has several applications in electrochemical energy conversion reactions. The rich catalytic site of transition metals and the excellent conductivity of carbon material make these materials as a hopeful electrocatalyst in OER. Carbon-incorporated LaFe_0.8Co_0.2O₃ was prepared by a simple solution combustion method for the development of the best performance of the electrocatalyst. The catalyst can deliver 10 mA/cm² current density at an overpotential of 410 mV with better catalytic stability. The introduction of carbon material improves the dispersion ability of the catalyst and the electrical conductivity. The Tafel slope and onset potential of the best catalyst are 49.1 mV/dec and 1.55 V, respectively.

Noble-Metal-Free Multicomponent Nanointegration for Sustainable Energy Conversion

Global energy and environmental crises are among the most pressing challenges facing humankind. To overcome these challenges, recent years have seen an upsurge of interest in the development and production of renewable chemical fuels as alternatives to the nonrenewable and high-polluting fossil fuels. Photocatalysis, photoelectrocatalysis, and electrocatalysis provide promising avenues for sustainable energy conversion. Single- and dual-component catalytic systems based on nanomaterials have been intensively studied for decades, but their intrinsic weaknesses hamper their practical applications. Multicomponent nanomaterial-based systems, consisting of three or more components with at least one component in the nanoscale, have recently emerged. The multiple components are integrated together to create synergistic effects and hence overcome the limitation for outperformance. Such higher-efficiency systems based on nanomaterials will potentially bring an additional benefit in balance-of-system costs if they exclude the use of noble metals, considering the expense and sustainability. It is therefore timely to review the research in this field, providing guidance in the development of noble-metal-free multicomponent nanointegration for sustainable energy conversion. In this work, we first recall the fundamentals of catalysis by nanomaterials, multicomponent nanointegration, and reactor configuration for water splitting, CO₂ reduction, and N₂ reduction. We then systematically review and discuss recent advances in multicomponent-based photocatalytic, photoelectrochemical, and electrochemical systems based on nanomaterials. On the basis of these systems, we further laterally evaluate different multicomponent integration strategies and highlight their impacts on catalytic activity, performance stability, and product selectivity. Finally, we provide conclusions and future prospects for multicomponent nanointegration. This work offers comprehensive insights into the development of cost-competitive multicomponent nanomaterial-based systems for sustainable energy-conversion technologies and assists researchers working toward addressing the global challenges in energy and the environment.

Highly Curved Nanostructure-Coated Co, N-Doped Carbon Materials for Oxygen Electrocatalysis

Nitrogen-doped graphene could catalyze the electrochemical reduction and evolution of oxygen, but unfortunately suffers from sluggish catalytic kinetics. Herein, for the first time, we report an onion-like carbon coated Co, N-doped carbon (OLC/Co-N-C) material, which possesses multilayers of highly curved nanostructures that form mesoporous architectures. These unique nanospheres are produced when surfactant micelles are introduced to synthesis precursors. Owing to the combined electronic effect and nanostructuring effect, our OLC/Co-N-C materials exhibit high bifunctional oxygen reduction/evolution reaction (ORR/OER) activity, showing a promising application in rechargeable Zn-air batteries. Experimental results are rationalized by theoretical calculations, showing that the curvature of graphitic carbon plays a vital role in promoting activities of meta-carbon atoms near graphitic N and ortho/meta carbon atoms close to pyridinic N.

Molecular Precursor Route to CuCo2S4 Nanosheets: A High-Performance Pre-Catalyst for Oxygen Evolution and Its Application in Zn-Air Batteries

Development of high-efficiency non-precious metal-based electrocatalysts to drive the complex four-electron process of the oxygen evolution reaction (OER) is crucial for production of hydrogen and energy storage components. Herein, bimetallic CuCo₂S₄ nanosheets were created by a new molecular precursor route. The optimal CuCo₂S₄ catalyst demonstrates superior performance to catalyze the OER with excellent stability, which was confirmed by the low overpotential of 290 mV at 10 mA cm^-2 in 1 M KOH. The catalytic activity can be maintained for at least 40 h. The catalyst after the OER was then detected. The results indicate that S-doped CoOOH/CuO nanosheets formed on the catalyst surface during the OER may act as the catalytic active substance. Furthermore, when employed as an air cathode in a Zn-air battery, it reveals a high open-cycle potential of 1.38 V and a peak power density of 123.9 mW cm^-2. The performance of the rechargeable Zn-air battery is close to that fabricated with commercial precious metal-based electrocatalysts. These findings would furnish some guidelines for the design, development, and applications of bimetallic sulfide electrocatalysts for the OER.

Donor-Acceptor Couples of Metal and Metal Oxides with Enriched Ni3+ Active Sites for Oxygen Evolution

Exploiting precious-metal-free and high-activity oxygen evolution reaction (OER) electrocatalysts has been in great demands toward many energy storage and conversion processes, for example, carbon dioxide reduction, metal-air batteries, and water splitting. In this study, the simple solid-state method is employed for coupling Ni (electron donors) with lower-Fermi-level MoO₂ or WO_x (electron acceptors) into donor-acceptor ensembles with well-designed interfaces as robust electrocatalysts for OER. The resulting Ni/MoO₂ and Ni/WO_x electrocatalysts exhibit smaller overpotentials of 287 and 333 mV at 10 mA cm^-2 as well as smaller Tafel slopes of 51 and 65 mV/dec, respectively, with respect to the single Ni, MoO₂, WO_x, and even the benchmark RuO₂ in 1 M KOH. Specially, on account of a higher Fermi level of Ni in comparison with MoO₂ and WO_x, their strong electronic interaction results in directional interfacial electron transfer and increases the hole density over Ni, dramatically enriching the population of high-valence Ni³⁺ active sites and decreasing the Fermi level of Ni. The existence of Ni³⁺ can strengthen the chemisorption of OH^-, and the downshift of the Ni Fermi level can significantly expedite migration of electrons toward the surface of catalysts during OER, thus synergistically boosting the OER catalytic performance. Furthermore, the inner Ni/MoO₂ and Ni/WO_x heterostructures and the electrochemically induced surface layers of oxides/hydroxides collectively boost the OER kinetics. This study highlights the importance of designing highly efficient OER electrocatalysts with high-valence active species (Ni³⁺) and better matched energy levels induced by the work function difference through interfacial engineering.

Hierarchical iron molybdate nanostructure array for efficient water oxidation through optimizing electron density

The water oxidation reaction plays a major role in many alternative-energy systems because it provides the electrons and protons required for the use of renewable electricity. We report the tuning of the iron molybdate (FeMoO₄) electron structure via a coupled interface between the catalytic centers and the substrate. Our developed FeMoO₄ catalysts can provide a 50 mA cm^-2 current density at 1.506 V vs. RHE with excellent stability in 1.0 M KOH. The improved performance can be ascribed to the synergy of the optimized electronic structures and hierarchical nanostructure.

Optimization of Ni-Co-Fe-Based Catalysts for Oxygen Evolution Reaction by Surface and Relaxation Phenomena Analysis

Trimetallic double hydroxide NiFeCo-OH is prepared by coprecipitation, from which three different catalysts are fabricated by different heat treatments, all at 350 °C maximum temperature. Among the prepared catalysts, the one prepared at a heating and cooling rate of 2 °C min^-1 in N₂ atmosphere (designated NiFeCo-N₂ -2 °C) displays the best catalytic properties after stability testing, exhibiting a high current density (9.06 mA cm^-2 at 320 mV), low Tafel slope (72.9 mV dec^-1 ), good stability (over 20 h), high turnover frequency (0.304 s^-1 ), and high mass activity (46.52 A g^-1 at 320 mV). Stability tests reveal that the hydroxide phase is less suitable for long-term use than catalysts with an oxide phase. Two causes are identified for the loss of stability in the hydroxide phase: a) Modeling of the distribution function of relaxation times (DFRT) reveals the increase in resistance contributed by various relaxation processes; b) density functional theory (DFT) surface energy calculations reveal that the higher surface energy of the hydroxide-phase catalyst impairs the stability. These findings represent a new strategy to optimize catalysts for water splitting.

Preparation of Hollow Cobalt-Iron Phosphides Nanospheres by Controllable Atom Migration for Enhanced Water Oxidation and Splitting

Transition metal phosphides (TMPs), especially the dual-metal TMPs, are highly active non-precious metal oxygen evolution reaction (OER) electrocatalysts. Herein, an interesting atom migration phenomenon induced by Kirkendall effect is reported for the preparation of cobalt-iron (Co-Fe) phosphides by the direct phosphorization of Co-Fe alloys. The compositions and distributions of the Co and Fe phosphides phases on the surfaces of the electrocatalysts can be readily controlled by Co_x Fe_y alloys precursors and the phosphorization process with interesting atom migration phenomenon. The optimized Co₇ Fe₃ phosphides exhibit a low overpotential of 225 mV at 10 mA cm^-2 in 1 m KOH alkaline media, with a small Tafel slope of 37.88 mV dec^-1 and excellent durability. It only requires a voltage of 1.56 V to drive the current density of 10 mA cm^-2 when used as both anode and cathode for overall water splitting. This work opens a new strategy to controllable preparation of dual-metal TMPs with designed phosphides active sites for enhanced OER and overall water splitting.