Recent advances in chemical surface modification of metal oxide nanoparticles with silane coupling agents: A review

Review: 3-Aminopropyltriethoxysilane (APTES) Deposition Methods on Oxide Surfaces in Solution and Vapor Phases for Biosensing Applications

Surface functionalization and bioreceptor immobilization are critical processes in developing a highly sensitive and selective biosensor. The silanization process with 3-aminopropyltriethoxysilane (APTES) on oxide surfaces is frequently used for surface functionalization because of beneficial characteristics such as its bifunctional nature and low cost. Optimizing the deposition process of the APTES layer to obtain a monolayer is crucial to having a stable surface and effectively immobilizing the bioreceptors, which leads to the improved repeatability and sensitivity of the biosensor. This review provides an overview of APTES deposition methods, categorized into the solution-phase and vapor-phase, and a comprehensive summary and guide for creating stable APTES monolayers on oxide surfaces for biosensing applications. A brief explanation of APTES is introduced, and the APTES deposition methods with their pre/post-treatments and characterization results are discussed. Lastly, APTES deposition methods on nanoparticles used for biosensors are briefly described.

NH2-CuO-MCM-41 covalently cross-linked multipurpose membrane for applications in water treatment: Removal of hazardous pollutants from water, water desalination and anti-biofouling performance

The current study was planned to fabricate a new set of membranes to target multiple application areas such as desalting, removal of micropollutants and antibiofouling performance. In-situ incorporated copper oxide to MCM-41 (CuO-MCM-41) was synthesized and amine (-NH₂) functionalized by reacting with N1-(3-trimethoxy silylpropyl) diethylenetriamine (NTSDETA) yielding NH₂-CuO-MCM-41. Different concentrations of NH₂-CuO-MCM-41 were covalently cross-linked in polyamide active layer during interfacial polymerization (IP) between N, N'-bis(3-aminopropyl)ethylenediamine and terephthaloyl chloride (TPC) on polysulfone/poly ester terephthalate (PS/PET) support. The membranes were extensively characterized by Water Contact Angle (WCA), Scanning Electron Microscopy (SEM), Fourier Transform Infra-red (FTIR) spectroscopy, Energy Dispersive X-ray (EDX) analysis, Elemental mapping and Powder X-ray Diffraction (PXRD). From among the different versions of X-CuO-MCM-41/PA@PS/PET membranes, the 0.05%-CuO-MCM-41/PA@PS/PET membrane showed best performance in terms of rejecting a variety of salts, micropollutants and antibiofouling. The 0.05%-CuO-MCM-41/PA@PS/PET showed >98% rejection of MgCl₂ and 78% rejection of caffeine with a permeate flux of 16 LMH at 25 bar. The 0.1-NH₂-CuO-MCM-41inhibited S. aureus growth by 51.7%. Hence, the current strategy of membrane fabrication proved to be highly efficient for multipurpose applications in water treatment.

27Al Solid-State Magic-Angle Spinning NMR Studies of Aluminum Powder Particle Surfaces Treated with a Methyltriethoxysilane Coupling Agent under Acidic Conditions

We report on the reaction between methyltriethoxysilane (MTES) and micrometer-sized aluminum particles, facilitated by HCl. This reaction ultimately produces silane-coated aluminum particles. Using ²⁷Al magic-angle spinning solid-state nuclear magnetic resonance, we find that aluminum powder starts with a mixture of tetrahedrally, pentahedrally, and octahedrally coordinated aluminum, with the pentahedral species dominating. In the presence of HCl, however, the aluminum undergoes a restructuring, so that octahedrally coordinated aluminum is the dominant species. Using diffuse reflectance infrared spectroscopy to confirm the deposition of silane, we find that this restructuring of the aluminum in the presence of HCl is both a sufficient and necessary condition for the deposition of the silane.

A review on recent advances in the applications of composite Fe3O4 magnetic nanoparticles in the food industry

Fe3O4 magnetic nanoparticles (MNPs) have attracted tremendous attention due to their superparamagnetic properties, large specific surface area, high biocompatibility, non-toxicity, large-scale production, and recyclability. More importantly, numerous hydroxyl groups (-OH) on the surface of Fe3O4 MNPs can provide coupling sites for various modifiers, forming versatile nanocomposites for applications in the energy, biomedicine, and environmental fields. With the development of science and technology, the potential of nanotechnology in the food industry has also gradually become prominent. However, the application of composite Fe3O4 MNPs in the food industry has not been systematically summarized. Herein, this article reviews composite Fe3O4 MNPs, including their properties, modifications, and physical functions, as well as their applications in the entire food industry from production to processing, storage, and detection. This review lays a solid foundation for promoting food innovation and improving food quality and safety.

Photocatalytic effect-assisted antimicrobial activities of acrylic resin incorporating zinc oxide nanoflakes

To overcome the deficiency of the antimicrobial effect of polymer, zinc oxide nanoparticles have been widely utilized as advanced nanofillers due to their antimicrobial and photocatalytic activity. However, the underlying antimicrobial mechanism has not been fully understood apart from topological and physical characteristics. In this study, we prepared zinc oxide nanoparticles-based acrylic resin to explore its antimicrobial mechanism under controlled mechanophysical conditions by using silane-treated zinc oxide nanoflakes (S-ZnNFs). S-ZnNFs incorporated acrylic resin (poly(methyl methacrylate), PMMA) composites up to 2 wt% were selected based on comparable mechanophysical properties (e.g., roughness, wettability, strength and hardness), possibly affecting antimicrobial properties beyond the zinc oxide nanoparticle effect, to bare PMMA. Antimicrobial adhesion results were still observed in 2 wt% S-ZnNFs incorporated PMMA using Candida albicans (C. albicans), one of the fungal infection species. In order to confirm the antimicrobial effects by photocatalysis, we pre-exposed the UV light on 2 wt% S-ZnNF composites before cell seeding, revealing synergetic antimicrobial effect via additional reactive oxygen species (ROS) generation to C. albicans over zinc oxide nanoparticle-induced one. RNA-seq analysis revealed distinguished cellular responses between zinc oxide nanoparticles and UV-mediated photocatalytic effect, but both linked to generation of intracellular ROS. Thus, the above data suggest that induction of high intracellular ROS of C. albicans was the main antimicrobial mechanism under controlled mechanophysical parameters and synergetic ROS accumulation can be induced by photocatalysis, recapitulating a promising use of a S-ZnNFs or possibly zinc oxide nanoparticles as intracellular-ROS-generating antimicrobial nanofillers in acrylic composite for biomedical applications.

New Insights into Amino-Functionalization of Magnetic Nanoplatelets with Silanes and Phosphonates

Magnetic nanoplatelets (NPLs) based on barium hexaferrite (BaFe₁₂O₁₉) are suitable for many applications because of their uniaxial magneto-crystalline anisotropy. Novel materials, such as ferroic liquids, magneto-optic composites, and contrast agents for medical diagnostics, were developed by specific surface functionalization of the barium hexaferrite NPLs. Our aim was to amino-functionalize the NPLs’ surfaces towards new materials and applications. The amino-functionalization of oxide surfaces is challenging and has not yet been reported for barium hexaferrite NPLs. We selected two amine ligands with two different anchoring groups: an amino-silane and an amino-phosphonate. We studied the effect of the anchoring group, backbone structure, and processing conditions on the formation of the respective surface coatings. The core and coated NPLs were examined with transmission electron microscopy, and their room-temperature magnetic properties were measured. The formation of coatings was followed by electrokinetic measurements, infrared and mass spectroscopies, and thermogravimetric analysis. The most efficient amino-functionalization was enabled by (i) amino-silanization of the NPLs precoated with amorphous silica with (3-aminopropyl)triethoxysilane and (ii) slow addition of amino-phosphonate (i.e., sodium alendronate) to the acidified NPL suspension at 80 °C.

Aminoalkyl-organo-silane treated sand for the adsorptive removal of arsenic from the groundwater: Immobilizing the mobilized geogenic contaminants

Arsenic (As), a geogenic legacy pollutant can be present in environmental matrices (water, soil, plants, or animal) in two redox states (As(III) or As(V)). In the present study, charged mono- and di-amino functionalized triethoxy and methoxyorganosilane (TT1 and TT2- 1% and 5%) were impregnated with quartz sand particles for the treatment of As polluted water. Spectroscopic characterization of organosilane treated sand (STS) indicated the co-existence of minerals (Mg, Mn, Ti), amide, and amidoalkyl groups, which implies the suitability of silanized materials as a metal(loids) immobilization agent from water. Changes in peaks were observed after As sorption in Fourier thermal infrared and EDS images indicating the involvement of chemisorption. Batch sorption studies were performed with the optimized experimental parameters, where an increased removal (>20% for TT2-1% and >60% for TT1-1%) of As was observed with sorbate concentration (50 µg L^-1), temp. (25 ± 2 ºC) and sorbent dosages (of 10 g L^-1) at 120 min contact time. Among the different adsorbent dosages, 10 g L^-1 of both TT1 and TT2 was selected as an optimum dosage (maximum adsorption capacity ≈ 2.91 μg g^-1). The sorption model parameters suggested the possibility of chemisorption, charge/ion-dipole interaction for the removal of arsenate.

Surface Hydrophobic Modification of Biochar by Silane Coupling Agent KH-570

Biochar-amended soil cover (BSC) in landfills can improve the oxidation of methane. However, adding biochar can cause a larger amount of rainwater to enter the soil cover and landfill because it increases the permeability of the soil cover, which increases leachate production. Improving the hydrophobicity and waterproof ability of BSC is expected to reduce rainwater that goes into landfills. Silane coupling agent KH-570 is used to modify biochar to improve its hydrophobicity and waterproof ability after being added to the soil cover. The waterproofness of hydrophobic biochar-amended soil cover (HBSC) was studied by conducting a precipitation simulation test. Results showed that the optimum hydrophobicity of the surface-modified biochar was obtained when the mass fraction of KH-570 was 7%, the biochar dosage was 7 g, and the modification temperature was 60 °C. In these conditions, the contact angle was 143.99° and the moisture absorption rate was 0.10%. The analysis results of thermogravimetric, X-ray diffractometer and scanning electron microscopy before and after the biochar modification showed that KH-570 formed a hydrophobic organic coating layer on the biochar surface, indicating that the surface hydrophobic modification of biochar was successfully carried out by silane coupling agent. The waterproof ability of HBSC was significantly better than that of BSC in the simulated precipitation test.

Hybrid Nanofluids-Next-Generation Fluids for Spray-Cooling-Based Thermal Management of High-Heat-Flux Devices

In recent years, technical advancements in high-heat-flux devices (such as high power density and increased output performance) have led to immense heat dissipation levels that may not be addressed by traditional thermal fluids. High-heat-flux devices generally dissipate heat in a range of 100–1000 W/cm² and are used in various applications, such as data centers, electric vehicles, microelectronics, X-ray machines, super-computers, avionics, rocket nozzles and laser diodes. Despite several benefits offered by efficient spray-cooling systems, such as uniform cooling, no hotspot formation, low thermal contact resistance and high heat transfer rates, they may not fully address heat dissipation challenges in modern high-heat-flux devices due to the limited cooling capacity of existing thermal fluids (such as water and dielectric fluids). Therefore, in this review, a detailed perspective is presented on fundamental hydrothermal properties, along with the heat and mass transfer characteristics of the next-generation thermal fluid, that is, the hybrid nanofluid. At the end of this review, the spray-cooling potential of the hybrid nanofluid for thermal management of high-heat-flux devices is presented.

Superhydrophobic Composite Coating with Excellent Mechanical Durability

Superhydrophobic surfaces have great potential for self-cleaning, anti-icing, and drag-reducing because of their water repellency property. However, their super-hydrophobicity is destroyed under mechanical abrasion due to the vulnerability of the delicate surface textures. Here, we demonstrate a strategy to create a robust superhydrophobic surface using MXene and fluoridated silica as functional fillers in epoxy resin. The fluoridated silica produces low surface energy, MXene serves as a wear-resistant phase and epoxy resin is the binding matrix. The composite coating demonstrates a self-cleaning effect to remove particles from the superhydrophobic surface by rolling water droplets. Moreover, the coating exhibits excellent mechanical durability by standing abrasion to maintain super-hydrophobicity. The superhydrophobic composite coating has the advantages of low cost and feasibility and has the potential for expandable industrial promotion.

Size-dependent Al-doped SrTiO3 affecting solar-driven overall water splitting

The equilibrium relationship between the charge transfer and gas evolution capacities of reasonable size Al-STO nanoparticles induces the balance point of HER and OER half-reactions.

Non-thermal plasma for surface treatment of inorganic fillers added to resin-based cements

OBJECTIVES

This study aims to evaluate the effect of non-thermal plasma (NTP) surface treatment in two composite inorganic fillers and evaluate their impact on the chemical-mechanical properties and bond strength ability of experimental resin cements.

MATERIALS AND METHODS

Ytterbium fluoride (YF) and barium silicate glass (BS) were characterized and submitted to different surface treatments: non-thermal plasma (NTP); non-thermal plasma and 3-(trimethoxysilyl) propyl methacrylate silanization; and 3-(trimethoxysilyl) propyl methacrylate silanization. Untreated fillers were used as a control. The fillers were incorporated at 65wt% concentration into light-cured experimental resin cements (50wt% BisGMA; 25wt% UDMA; 25wt% TEGDMA; 1mol% CQ). The degree of conversion, the flexural strength, and the microshear bond strength (μSBS) were evaluated to characterize developed composites.

RESULTS

YF and BS were successfully cleaned with NTP treatment. Nor NTP neither the silanization affected the degree of conversion of resin cements. The NTP predicted an increase in YF-containing resin cements flexural strength, reducing the storage impact in these materials. NTP treatment did not affect the μSBS when applied to YF, while silanization was effective for BS-containing materials.

CONCLUSION

NTP treatment of inorganic particles was possible and was shown to reduce the amount of organic contamination of the particle surface. YF surface treatment with NTP can be an alternative to improve the organic/inorganic interaction in resin composites to obtain materials with better mechanical properties.

CLINICAL RELEVANCE

Surface cleaning with NTP may be an alternative for particle surface cleaning to enhance organic-inorganic interaction in dental composites resulting in improved mechanical strength of experimental resin cements.

Nanotargeting of Resistant Infections with a Special Emphasis on the Biofilm Landscape

Bacterial resistance to antimicrobial compounds is a growing concern in medical and public health circles. Overcoming the adaptable and duplicative resistance mechanisms of bacteria requires chemistry-based approaches. Engineered nanoparticles (NPs) now offer unique advantages toward this effort. However, most in situ infections (in humans) occur as attached biofilms enveloped in a protective surrounding matrix of extracellular polymers, where survival of microbial cells is enhanced. This presents special considerations in the design and deployment of antimicrobials. Here, we review recent efforts to combat resistant bacterial strains using NPs and, then, explore how NP surfaces may be specifically engineered to enhance the potency and delivery of antimicrobial compounds. Special NP-engineering challenges in the design of NPs must be overcome to penetrate the inherent protective barriers of the biofilm and to successfully deliver antimicrobials to bacterial cells. Future challenges are discussed in the development of new antibiotics and their mechanisms of action and targeted delivery via NPs.

In situ thermal decomposition route: Preparation and characterization of nano nickel, cobalt, and copper oxides using an aromatic amine complexes as a low-cost simple precursor

The main interest now is the development of metallic or inorganic-organic compounds to prepare nanoparticle materials. The use of new compounds could be beneficial and open a new method for preparing nanomaterials to control the size, shape, and size of the nanocrystals. In this article, the thermal decomposition of [M2(o-tol)2(H2O)8] Cl4 (where o-tol is ortho-tolidine compound, M = Ni2+, Co2+, Cu2+) new precursor complex was discussed in solid-state conditions. The thermal decomposition route showed that the synthesized three complexes were easily decomposed into NiO, Co3O4 and CuO nanoparticles. This decomposition was performed at low temperatures (~600°C) in atmospheric air without using any expensive and toxic solvent or complicated equipment. The obtained product was identified by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDX). FT-IR, XRD and EDX analyses revealed that the NiO nanoparticles exhibit a face-centered-cubic lattice structure with a crystallite size of 9–12 nm. The formation of a highly pure spinel-type Co3O4 phase with cubic structure showed that the Co3O4 nanoparticles have a sphere-like morphology with an average size of 8–10 nm. The XRD patterns of the CuO confirmed that the monoclinic phase with the average diameter of the spherical nanoparticles was approximately 9–15 nm.

Physicochemical implications of surface alkylation of high-valent, Lindqvist-type polyoxovanadate-alkoxide clusters

We report a rare example of the direct alkylation of the surface of a plenary polyoxometalate cluster by leveraging the increased nucleophilicity of vanadium oxide assemblies. Addition of methyl trifluoromethylsulfonate (MeOTf) to the parent polyoxovanadate cluster, [V₆O₁₃(TRIOL^R)₂]^2- (TRIOL = tris(hydroxymethyl)methane; R = Me, NO₂) results in functionalisation of one or two bridging oxide ligands of the cluster core to generate [V₆O₁₂(OMe)(TRIOL^R)₂]^1- and [V₆O₁₁(OMe)₂(TRIOL^R)₂]^2-, respectively. Comparison of the electronic absorption spectra of the functionalised and unfunctionalised derivatives indicates the decreased overall charge of the complex results in a decrease in the energy required for ligand to metal charge transfer events to occur, while simultaneously mitigating the inductive effects imposed by the capping TRIOL ligand. Electrochemical analysis of the family of organofunctionalised polyoxovanadate clusters reveals the relationship of ligand environment and the redox properties of the cluster core: increased organofunctionalisation of the surface of the vanadium oxide assembly translates to anodic shifts in the reduction events of the Lindqvist ion. Overall, this work provides insight into the electronic effects induced upon atomically precise modifications to the surface structure of nanoscopic, redox-active metal oxide assemblies.