More than a feeling: discovering, understanding, and influencing mechanosensing pathways

Two-Layer Elastographic 3-D Traction Force Microscopy

Cellular traction force microscopy (TFM) requires knowledge of the mechanical properties of the substratum where the cells adhere to calculate cell-generated forces from measurements of substratum deformation. Polymer-based hydrogels are broadly used for TFM due to their linearly elastic behavior in the range of measured deformations. However, the calculated stresses, particularly their spatial patterns, can be highly sensitive to the substratum's Poisson's ratio. We present two-layer elastographic TFM (2LETFM), a method that allows for simultaneously measuring the Poisson's ratio of the substratum while also determining the cell-generated forces. The new method exploits the analytical solution of the elastostatic equation and deformation measurements from two layers of the substratum. We perform an in silico analysis of 2LETFM concluding that this technique is robust with respect to TFM experimental parameters, and remains accurate even for noisy measurement data. We also provide experimental proof of principle of 2LETFM by simultaneously measuring the stresses exerted by migrating Physarum amoeboae on the surface of polyacrylamide substrata, and the Poisson's ratio of the substrata. The 2LETFM method could be generalized to concurrently determine the mechanical properties and cell-generated forces in more physiologically relevant extracellular environments, opening new possibilities to study cell-matrix interactions.

Concise Review: Organ Engineering: Design, Technology, and Integration

Engineering complex tissues and whole organs has the potential to dramatically impact translational medicine in several avenues. Organ engineering is a discipline that integrates biological knowledge of embryological development, anatomy, physiology, and cellular interactions with enabling technologies including biocompatible biomaterials and biofabrication platforms such as three-dimensional bioprinting. When engineering complex tissues and organs, core design principles must be taken into account, such as the structure-function relationship, biochemical signaling, mechanics, gradients, and spatial constraints. Technological advances in biomaterials, biofabrication, and biomedical imaging allow for in vitro control of these factors to recreate in vivo phenomena. Finally, organ engineering emerges as an integration of biological design and technical rigor. An overall workflow for organ engineering and guiding technology to advance biology as well as a perspective on necessary future iterations in the field is discussed. Stem Cells 2017;35:51-60.

Hierarchical macropore/nano surface regulates stem cell fate through a ROCK-related signaling pathway

Synergistic cytoskeleton distribution accompanying higher ROCK activity activated FAK-ERK1/2 signaling pathway and promotion of BMSC osteogenesis on hierarchical surface.

High content image analysis of focal adhesion-dependent mechanosensitive stem cell differentiation

Human mesenchymal stem cells (hMSCs) receive differentiation cues from a number of stimuli, including extracellular matrix (ECM) stiffness. The pathways used to sense stiffness and other physical cues are just now being understood and include proteins within focal adhesions. To rapidly advance the pace of discovery for novel mechanosensitive proteins, we employed a combination of in silico and high throughput in vitro methods to analyze 47 different focal adhesion proteins for cryptic kinase binding sites. High content imaging of hMSCs treated with small interfering RNAs for the top 6 candidate proteins showed novel effects on both osteogenic and myogenic differentiation; Vinculin and SORBS1 were necessary for stiffness-mediated myogenic and osteogenic differentiation, respectively. Both of these proteins bound to MAPK1 (also known as ERK2), suggesting that it plays a context-specific role in mechanosensing for each lineage; validation for these sites was performed. This high throughput system, while specifically built to analyze stiffness-mediated stem cell differentiation, can be expanded to other physical cues to more broadly assess mechanical signaling and increase the pace of sensor discovery.

Physical confinement signals regulate the organization of stem cells in three dimensions

During embryogenesis, the spherical inner cell mass (ICM) proliferates in the confined environment of a blastocyst. Embryonic stem cells (ESCs) are derived from the ICM, and mimicking embryogenesis in vitro, mouse ESCs (mESCs) are often cultured in hanging droplets. This promotes the formation of a spheroid as the cells sediment and aggregate owing to increased physical confinement and cell-cell interactions. In contrast, mESCs form two-dimensional monolayers on flat substrates and it remains unclear if the difference in organization is owing to a lack of physical confinement or increased cell-substrate versus cell-cell interactions. Employing microfabricated substrates, we demonstrate that a single geometric degree of physical confinement on a surface can also initiate spherogenesis. Experiment and computation reveal that a balance between cell-cell and cell-substrate interactions finely controls the morphology and organization of mESC aggregates. Physical confinement is thus an important regulatory cue in the three-dimensional organization and morphogenesis of developing cells.

Aquatic flower-inspired cell culture platform with simplified medium exchange process for facilitating cell-surface interaction studies

Establishing fundamentals for regulating cell behavior with engineered physical environments, such as topography and stiffness, requires a large number of cell culture experiments. However, cell culture experiments in cell-surface interaction studies are generally labor-intensive and time-consuming due to many experimental tasks, such as multiple fabrication processes in sample preparation and repetitive medium exchange in cell culture. In this work, a novel aquatic flower-inspired cell culture platform (AFIP) is presented. AFIP aims to facilitate the experiments on the cell-surface interaction studies, especially the medium exchange process. AFIP was devised to capture and dispense cell culture medium based on interactions between an elastic polymer substrate and a liquid medium. Thus, the medium exchange can be performed easily and without the need of other instruments, such as a vacuum suction and pipette. An appropriate design window of AFIP, based on scaling analysis, was identified to provide a criterion for achieving stability in medium exchange as well as various surface characteristics of the petal substrates. The developed AFIP, with physically engineered petal substrates, was also verified to exchange medium reliably and repeatedly. A closed structure capturing the medium was sustained stably during cell culture experiments. NIH3T3 proliferation results also demonstrated that AFIP can be applied to the cell-surface interaction studies as an alternative to the conventional method.

Blebbistatin-Loaded Poly(d,l-lactide-co-glycolide) Particles For Treating Arthrofibrosis

Joint immobility is a debilitating complication of articular trauma that is characterized by thickening and stiffening of the joint capsule and the formation of fibrotic lesions inside joints. Capsule release surgery can temporarily restore mobility, but contraction often recurs due to the contractile activities of fibroblasts, which exert tension on the capsule ECM via nonmuscle myosin II. Based on these findings we hypothesized that blebbistatin, a drug that reversibly inhibits the activity of this protein, would relax ECM tension imposed by fibroblasts and reduce fibrosis. In this study, we characterized the effectiveness of blebbistatin as an anticontractile treatment. Given that sustained suppression of contractile activity may be required to achieve capsule release and reduce fibrosis, we compared the effects on fibroblast-mediated collagen ECM displacement of blebbistatin-loaded poly(lactide-co-gylcolide) (PLGA) particles versus bolus blebbistatin dosing. Time-lapse imaging of fluorescent microspheres embedded in collagen gels confirmed that PLGA/blebbistatin inhibited force generation and reduced both gel displacement and rate of displacement. In addition, collagen production at 10 days was significantly reduced. Taken together, these data indicate that blebbistatin-loaded PLGA particles can be used to inhibit fibroblast force-generation and reduce collagen production and lay the foundation for optimization of drug delivery technology for treating arthrofibrosis.

A nanotopography approach for studying the structure-function relationships of cells and tissues

Most cells in the body secrete, or are in intimate contact with extracellular matrix (ECM), which provides structure to tissues and regulates various cellular phenotypes. Cells are well known to respond to biochemical signals from the ECM, but recent evidence has highlighted the mechanical properties of the matrix, including matrix elasticity and nanotopography, as fundamental instructive cues regulating signal transduction pathways and gene transcription. Recent observations also highlight the importance of matrix nanotopography as a regulator of cellular functions, but lack of facile experimental platforms has resulted in a continued negligence of this important microenvironmental cue in tissue culture experimentation. In this review, we present our opinion on the importance of nanotopography as a biological cue, contexts in which it plays a primary role influencing cell behavior, and detail advanced techniques to incorporate nanotopography into the design of experiments, or in cell culture environments. In addition, we highlight signal transduction pathways that are involved in conveying the extracellular matrix nanotopography information within the cells to influence cell behavior.

Synthetic hydrogels with stiffness gradients for durotaxis study and tissue engineering scaffolds

Migration of cells along the right direction is of paramount importance in a number of in vivo circumstances such as immune response, embryonic developments, morphogenesis, and healing of wounds and scars. While it has been known for a while that spatial gradients in chemical cues guide the direction of cell migration, the significance of the gradient in mechanical cues, such as stiffness of extracellular matrices (ECMs), in directed migration of cells has only recently emerged. With advances in synthetic chemistry, micro-fabrication techniques, and methods to characterize mechanical properties at a length scale even smaller than a single cell, synthetic ECMs with spatially controlled stiffness have been created with variations in design parameters. Since then, the synthetic ECMs have served as platforms to study the migratory behaviors of cells in the presence of the stiffness gradient of ECM and also as scaffolds for the regeneration of tissues. In this review, we highlight recent studies in cell migration directed by the stiffness gradient, called durotaxis, and discuss the mechanisms of durotaxis. We also summarize general methods and design principles to create synthetic ECMs with the stiffness gradients and, finally, conclude by discussing current limitations and future directions of synthetic ECMs for the study of durotaxis and the scaffold for tissue engineering.

Enhanced Osteogenic Activity of TiO2 Nanorod Films with Microscaled Distribution of Zn-CaP

The topography at the micro-/nanoscale level and bioactive composition of material surfaces have been thought to play vital roles in their interactions with cells. However, it is still a challenge to further modify special topography with biodegradable composition or vice versa. In this study, TiO2 nanorod films covered with microscale-distributed Zn-containing calcium phosphate (Zn-CaP) were prepared, trying to create a micro-/nanoscale topography and Zn(2+) release capability. MC3T3-E1 cells cultured on TiO2 nanorod film with sparsely distributed Zn-CaP (TiO2/S-ZCP) had significantly higher biological responses than those on the films with densely distributed Zn-CaP (TiO2/D-ZCP) and fully covered Zn-CaP (F-ZCP). TiO2/S-ZCP film was demonstrated to facilitate osteogenic differentiation much more strongly than F-ZCP and TiO2/D-ZCP films based on evaluations of ALP, related gene expressions, and extracellular matrix mineralization. The higher osteogenic differentiation on TiO2/S-ZCP film is ascribed to the micro-/nanoscale topography from Zn-CaP coverage promoting cell adhesion and filopodia extension, and inducing differentiation-orientation in the initial stage. And consequently Zn(2+) release results in enhancement of differentiation. Therefore, we believe that better organization of the micro-/nanotopography and bioactive ion release on the surface would be a promising way to enhance osteogenic activity for orthopedic and dental implants.

In vitro cancer cell-ECM interactions inform in vivo cancer treatment

The general progression of cancer drug development involves in vitro testing followed by safety and efficacy evaluation in clinical trials. Due to the expense of bringing candidate drugs to trials, in vitro models of cancer cells and tumor biology are required to screen drugs. There are many examples of drugs exhibiting cytotoxic behavior in cancer cells in vitro but losing efficacy in vivo, and in many cases, this is the result of poorly understood chemoresistant effects conferred by the cancer microenvironment. To address this, improved methods for culturing cancer cells in biomimetic scaffolds have been developed; along the way, a great deal about the nature of cancer cell-extracellular matrix (ECM) interactions has been discovered. These discoveries will continue to be leveraged both in the development of novel drugs targeting these interactions and in the fabrication of biomimetic substrates for efficient cancer drug screening in vitro.

Electrical and mechanical stimulation of cardiac cells and tissue constructs

The field of cardiac tissue engineering has made significant strides over the last few decades, highlighted by the development of human cell derived constructs that have shown increasing functional maturity over time, particularly using bioreactor systems to stimulate the constructs. However, the functionality of these tissues is still unable to match that of native cardiac tissue and many of the stem-cell derived cardiomyocytes display an immature, fetal like phenotype. In this review, we seek to elucidate the biological underpinnings of both mechanical and electrical signaling, as identified via studies related to cardiac development and those related to an evaluation of cardiac disease progression. Next, we review the different types of bioreactors developed to individually deliver electrical and mechanical stimulation to cardiomyocytes in vitro in both two and three-dimensional tissue platforms. Reactors and culture conditions that promote functional cardiomyogenesis in vitro are also highlighted. We then cover the more recent work in the development of bioreactors that combine electrical and mechanical stimulation in order to mimic the complex signaling environment present in vivo. We conclude by offering our impressions on the important next steps for physiologically relevant mechanical and electrical stimulation of cardiac cells and engineered tissue in vitro.

Matrix Stiffness and Nanoscale Spatial Organization of Cell-Adhesive Ligands Direct Stem Cell Fate

One of the breakthroughs in biomaterials and regenerative medicine in the latest decade is the finding that matrix stiffness affords a crucial physical cue of stem cell differentiation. This statement was recently challenged by another understanding that protein tethering on material surfaces instead of matrix stiffness was the essential cue to regulate stem cells. Herein, we employed nonfouling poly(ethylene glycol) (PEG) hydrogels as the matrix to prevent nonspecific protein adsorption, and meanwhile covalently bound cell-adhesive arginine-glycine-aspartate (RGD) peptides onto the hydrogel surfaces in the form of well-defined nanoarrays to control specific cell adhesion. This approach enables the decoupling of the effects of matrix stiffness and surface chemistry. Mesenchymal stem cells (MSCs) were cultured on four substrates (two compressive moduli of the PEG hydrogels multiplied by two RGD nanospacings) and incubated in the mixed osteogenic and adipogenic medium. The results illustrate unambiguously that matrix stiffness is a potent regulator of stem cell differentiation. Moreover, we reveal that RGD nanospacing affects spreading area and differentiation of rat MSCs, regardless of the hydrogel stiffness. Therefore, both matrix stiffness and nanoscale spatial organization of cell-adhesive ligands direct stem cell fate.

Simultaneous and independent tuning of RhoA and Rac1 activity with orthogonally inducible promoters

The GTPases RhoA and Rac1 are key regulators of cell spreading, adhesion, and migration, and they exert distinct effects on the actin cytoskeleton. While RhoA classically stimulates stress fiber assembly and contraction, Rac1 promotes branched actin polymerization and membrane protrusion. These competing influences are reinforced by antagonistic crosstalk between RhoA and Rac1, which has complicated efforts to identify the specific mechanisms by which each GTPase regulates cell behavior. We therefore wondered whether RhoA and Rac1 are intrinsically coupled or whether they can be manipulated independently. To address this question, we placed constitutively active (CA) RhoA under a doxycycline-inducible promoter and CA Rac1 under an orthogonal cumate-inducible promoter, and we stably introduced both constructs into glioblastoma cells. We found that doxycycline addition increased RhoA activity without altering Rac1, and similarly cumate addition increased Rac1 activity without altering RhoA. Furthermore, co-expression of both mutants enabled high activation of RhoA and Rac1 simultaneously. When cells were cultured on collagen hydrogels, RhoA activation prevented cell spreading and motility, whereas Rac1 activation stimulated migration and dynamic cell protrusions. Interestingly, high activation of both GTPases induced a third phenotype, in which cells migrated at intermediate speeds similar to control cells but also aggregated into large, contractile clusters. In addition, we demonstrate dynamic and reversible switching between high RhoA and high Rac1 phenotypes. Overall, this approach represents a unique way to access different combinations of RhoA and Rac1 activity levels in a single cell and may serve as a valuable tool for multiplexed dissection and control of mechanobiological signals.

The synergistic effect of micro-topography and biochemical culture environment to promote angiogenesis and osteogenic differentiation of human mesenchymal stem cells

Critical failures associated with current engineered bone grafts involve insufficient induction of osteogenesis of the implanted cells and lack of vascular integration between graft scaffold and host tissue. This study investigated the combined effects of surface microtextures and biochemical supplements to achieve osteogenic differentiation of human mesenchymal stem cells (hMSCs) and revascularization of the implants in vivo. Cells were cultured on 10μm micropost-textured polydimethylsiloxane (PDMS) substrates in either proliferative basal medium (BM) or osteogenic medium (OM). In vitro data revealed that cells on microtextured substrates in OM had dense coverage of extracellular matrix, whereas cells in BM displayed more cell spreading and branching. Cells on microtextured substrates in OM demonstrated a higher gene expression of osteoblast-specific markers, namely collagen I, alkaline phosphatase, bone sialoprotein, and osteocalcin, accompanied by substantial amount of bone matrix formation and mineralization. To further investigate the osteogenic capacity, hMSCs on microtextured substrates under different biochemical stimuli were implanted into subcutaneous pockets on the dorsal aspect of immunocompromised mice to study capacity for ectopic bone formation. In vivo data revealed greater expression of osteoblast-specific markers coupled with increased vascular invasion on microtextured substrates with hMSCs cultured in OM. Together, these data represent a novel regenerative strategy that incorporates defined surface microtextures and biochemical stimuli to direct combined osteogenesis and re-vascularization of engineered bone scaffolds for musculoskeletal repair and relevant bone tissue engineering applications.

Traction forces mediated by integrin signaling are necessary for definitive endoderm specification

Pluripotent embryonic stem cells (ESCs) exert low-traction forces on their niche in vitro whereas specification to definitive endoderm in vivo coincides with force-mediated motility, suggesting a differentiation-mediated switch. However, the onset of contractility and extent to which force-mediated integrin signaling regulates fate choices is not understood. To address the requirement of tractions forces for differentiation, we examined mouse embryonic stem cell (ESC) specification towards definitive endoderm on fibrillar fibronectin containing a deformation-sensitive FRET probe. Inhibiting contractility resulted in an increase in the observed fibronectin FRET intensity ratio but also decreased the amount of phosphorylated nuclear SMAD2, leading to reduced expression of the definitive endoderm marker SOX17. By contrast ESCs maintained in pluripotency medium did not exert significant tractions against the fibronectin matrix. When laminin-111 was added to fibrillar matrices to improve the efficiency of definitive endoderm induction, ESCs decreased their fibronectin traction forces in a laminin-dependent manner; blocking the laminin-binding α3-integrin restored fibronectin matrix deformation and reduced SOX17 expression and SMAD2 phosphorylation, probably because of compensation of inhibitory signaling from SMAD7 after 5 days in culture. These data imply that traction forces and integrin signaling are important regulators of early fate decisions in ESCs.

Fluid-flow-induced mesenchymal stem cell migration: role of focal adhesion kinase and RhoA kinase sensors

The study of mesenchymal stem cell (MSC) migration under flow conditions with investigation of the underlying molecular mechanism could lead to a better understanding and outcome in stem-cell-based cell therapy and regenerative medicine. We used peer-reviewed open source software to develop methods for efficiently and accurately tracking, measuring and processing cell migration as well as morphology. Using these tools, we investigated MSC migration under flow-induced shear and tested the molecular mechanism with stable knockdown of focal adhesion kinase (FAK) and RhoA kinase (ROCK). Under steady flow, MSCs migrated following the flow direction in a shear stress magnitude-dependent manner, as assessed by root mean square displacement and mean square displacement, motility coefficient and confinement ratio. Silencing FAK in MSCs suppressed morphology adaptation capability and reduced cellular motility for both static and flow conditions. Interestingly, ROCK silencing significantly increased migration tendency especially under flow. Blocking ROCK, which is known to reduce cytoskeletal tension, may lower the resistance to skeletal remodelling during the flow-induced migration. Our data thus propose a potentially differential role of focal adhesion and cytoskeletal tension signalling elements in MSC migration under flow shear.

Extracellular matrix regulation in the muscle satellite cell niche

Increasing evidence points to extracellular matrix (ECM) components playing integral roles in regulating the muscle satellite cell (SC) niche. Even small alterations to the niche ECM can have profound effects on SC localization, activation, self-renewal, proliferation and differentiation. This review will focus on the ECM components that comprise the niche, how they are modulated in health and disease and how these changes are thought to affect SC function. Particular emphasis will be placed on the pathological niche and interventions that aim to restore healthy structure and function, as a better understanding of the interplay between the SC and its environment will drive more targeted and effective therapies.

Role of suspended fiber structural stiffness and curvature on single-cell migration, nucleus shape, and focal-adhesion-cluster length

It has been shown that cellular migration, persistence, and associated cytoskeletal arrangement are highly dependent on substrate stiffness (modulus: N/m(2) and independent of geometry), but little is known on how cells respond to subtle changes in local geometry and structural stiffness (N/m). Here, using fibers of varying diameter (400, 700, and 1200 nm) and length (1 and 2 mm) deposited over hollow substrates, we demonstrate that single mouse C2C12 cells attached to single suspended fibers form spindle morphologies that are sensitive to fiber mechanical properties. Over a wide range of increasing structural stiffness (2 to 100+ mN/m), cells exhibited decreases in migration speed and average nucleus shape index of ∼57% (from 58 to 25 μm/h) and ∼26% (from 0.78 to 0.58), respectively, whereas the average paxillin focal-adhesion-cluster (FAC, formed at poles) length increased by ∼38% (from 8 to 11 μm). Furthermore, the increase in structural stiffness directly correlates with cellular persistence, with 60% of cells moving in the direction of increasing structural stiffness. At similar average structural stiffness (25 ± 5 mN/m), cells put out longer FAC lengths on smaller diameters, suggesting a conservation of FAC area, and also exhibited higher nucleus shape index and migration speeds on larger-diameter fibers. Interestingly, cells were observed to deform fibers locally or globally through forces applied through the FAC sites and cells undergoing mitosis were found to be attached to the FAC sites by single filamentous tethers. These varied reactions have implications in developmental and disease biology models as they describe a strong dependence of cellular behavior on the cell's immediate mechanistic environment arising from alignment and geometry of fibers.

In search of the pivot point of mechanotransduction: mechanosensing of stem cells

Stem cells are undifferentiated cells with the ability to self-renew and to differentiate into diverse specialized cell types; hence, they have great potential in tissue engineering and cell therapies. In addition to biochemical regulation, the physical properties of the microenvironments, such as scaffold topography, substrate stiffness, and mechanical forces, including fluid shear stress, compression, and tensile strain, can also regulate the proliferation and differentiation of stem cells. Upon physical stimuli, cytoskeleton rearrangements are expected to counterbalance the extracellular mechanical forces, trigger signaling cascades, and eventually cause epigenetic modifications. This article mainly focuses on the mechanosensing, which is the upstream event of stem cell mechanotransduction and the downstream one of physical stimuli. Putative mechanosensors such as ion channels, integrins, and cell membrane as well as primary cilia are discussed. Because mechanical environment is an important stem cell niche, identification of mechanosensors not only can elucidate the mechanisms of mechanotransduction and fate commitments but also bring new prospects of the mechanical control as well as drug development for clinical application.

Inhibition of iPLA2 β and of stretch-activated channels by doxorubicin alters dystrophic muscle function

BACKGROUND AND PURPOSE

Chronic elevation in intracellular Ca(2+) concentration participates in death of skeletal muscle from mdx mice, a model for Duchenne muscular dystrophy (DMD). Candidate pathways mediating this Ca(2+) overload involve store-operated channels (SOCs) and stretch-activated channels (SACs), which are modulated by the Ca(2+) -independent form of PL A2 (iPLA2 ). We investigated the effect of doxorubicin (Dox), a chemotherapeutic agent reported to inhibit iPLA2 in other systems, on the activity of this enzyme and on the consequences on Ca(2+) handling and muscle function in mdx mice.

EXPERIMENTAL APPROACH

Effects of Dox on iPLA2 activity, reactive oxygen species production and on Ca(2+) influx were investigated in C2C12 and mdx myotubes. The mechanism of Dox-mediated iPLA2 inhibition was evaluated using purified 6x histidine-tagged enzyme. Aequorin technology was used to assess Ca(2+) concentrations underneath the plasma membrane. Isolated muscles were exposed to fatigue protocols and eccentric contractions to evaluate the effects of Dox on muscle function.

KEY RESULTS

Dox at 1-30 μM inhibited iPLA2 activity in cells and in the purified enzyme. Dox also inhibited SAC- but not SOC-mediated Ca(2+) influx in myotubes. Stimulated elevations of Ca(2+) concentrations below the plasmalemma were also blocked. Exposure of excised muscle to Dox was not deleterious to force production and promoted recovery from eccentric contractions.

CONCLUSIONS AND IMPLICATIONS

Dox showed efficacy against targets known to play a role in the pathology of DMD, namely iPLA2 and SAC. The potent SAC inhibitory effect of Dox is a novel finding that can explain partly the cardiomyopathy seen in chronic anthracycline treatment.

Mechanosensitive kinases regulate stiffness-induced cardiomyocyte maturation

Cells secrete and assemble extracellular matrix throughout development, giving rise to time-dependent, tissue-specific stiffness. Mimicking myocardial matrix stiffening, i.e. ~10-fold increase over 1 week, with a hydrogel system enhances myofibrillar organization of embryonic cardiomyocytes compared to static hydrogels, and thus we sought to identify specific mechanosensitive proteins involved. Expression and/or phosphorylation state of 309 unique protein kinases were examined in embryonic cardiomyocytes plated on either dynamically stiffening or static mature myocardial stiffness hydrogels. Gene ontology analysis of these kinases identified cardiogenic pathways that exhibited time-dependent up-regulation on dynamic versus static matrices, including PI3K/AKT and p38 MAPK, while GSK3β, a known antagonist of cardiomyocyte maturation, was down-regulated. Additionally, inhibiting GSK3β on static matrices improved spontaneous contraction and myofibril organization, while inhibiting agonist AKT on dynamic matrices reduced myofibril organization and spontaneous contraction, confirming its role in mechanically-driven maturation. Together, these data indicate that mechanically-driven maturation is at least partially achieved via active mechanosensing at focal adhesions, affecting expression and phosphorylation of a variety of protein kinases important to cardiomyogenesis.

Digital Plasmonic Patterning for Localized Tuning of Hydrogel Stiffness

The mechanical properties of the extracellular matrix (ECM) can dictate cell fate in biological systems. In tissue engineering, varying the stiffness of hydrogels-water-swollen polymeric networks that act as ECM substrates-has previously been demonstrated to control cell migration, proliferation, and differentiation. Here, "digital plasmonic patterning" (DPP) is developed to mechanically alter a hydrogel encapsulated with gold nanorods using a near-infrared laser, according to a digital (computer-generated) pattern. DPP can provide orders of magnitude changes in stiffness, and can be tuned by laser intensity and speed of writing. In vitro cellular experiments using A7R5 smooth muscle cells confirm cell migration and alignment according to these patterns, making DPP a useful technique for mechanically patterning hydrogels for various biomedical applications.

The fate of internalized α5 integrin is regulated by matrix-capable fibronectin

BACKGROUND

Assembly of fibronectin matrices is associated with integrin receptor turnover and is an important determinant of tissue remodeling. Although it is well established that fibronectin is the primary ligand for α5β1 receptor, the relationship between fibronectin matrix assembly and the fate of internalized α5 integrin remains poorly characterized.

MATERIALS AND METHODS

To evaluate the effect of fibronectin matrix on the fate of internalized α5 integrin, fibronectin-null Chinese hamster ovary and mouse embryo fibroblast cells were used to track the fate of α5 after exposure to exogenous fibronectin.

RESULTS

In the absence of matrix-capable fibronectin dimer, levels of internalized α5 decreased rapidly over time. This correlated with a decline in total cellular α5 and was associated with the ubiquitination of α5 integrin. In contrast, internalized and total cellular α5 protein levels were maintained when matrix-capable fibronectin was present in the extracellular space. Further, we show that ubiquitination and degradation of internalized α5 integrin in the absence of fibronectin require the presence of two specific lysine residues in the α5 cytoplasmic tail.

CONCLUSIONS

Our data demonstrate that α5 integrin turnover is dependent on fibronectin matrix assembly, where the absence of matrix-capable fibronectin in the extracellular space targets the internalized receptor for rapid degradation. These findings have important implications for understanding tissue-remodeling processes found in wound repair and tumor invasion.

Materials as stem cell regulators

The stem cell/material interface is a complex, dynamic microenvironment in which the cell and the material cooperatively dictate one another's fate: the cell by remodelling its surroundings, and the material through its inherent properties (such as adhesivity, stiffness, nanostructure or degradability). Stem cells in contact with materials are able to sense their properties, integrate cues via signal propagation and ultimately translate parallel signalling information into cell fate decisions. However, discovering the mechanisms by which stem cells respond to inherent material characteristics is challenging because of the highly complex, multicomponent signalling milieu present in the stem cell environment. In this Review, we discuss recent evidence that shows that inherent material properties may be engineered to dictate stem cell fate decisions, and overview a subset of the operative signal transduction mechanisms that have begun to emerge. Further developments in stem cell engineering and mechanotransduction are poised to have substantial implications for stem cell biology and regenerative medicine.

Cellular traction stresses mediate extracellular matrix degradation by invadopodia

During tumorigenesis, matrix rigidity can drive oncogenic transformation via altered cellular proliferation and migration. Cells sense extracellular matrix (ECM) mechanical properties with intracellular tensile forces generated by actomyosin contractility. These contractile forces are transmitted to the matrix surface as traction stresses, which mediate mechanical interactions with the ECM. Matrix rigidity has been shown to increase proteolytic ECM degradation by cytoskeletal structures known as invadopodia that are critical for cancer progression, suggesting that cellular contractility promotes invasive behavior. However, both increases and decreases in traction stresses have been associated with metastatic behavior. Therefore, the role of cellular contractility in invasive migration leading to metastasis is unclear. To determine the relationship between cellular traction stresses and invadopodia activity, we characterized the invasive and contractile properties of an aggressive carcinoma cell line utilizing polyacrylamide gels of different rigidities. We found that ECM degradation and traction stresses were linear functions of matrix rigidity. Using calyculin A to augment myosin contractility, we also found that traction stresses were strongly predictive of ECM degradation. Overall, our data suggest that cellular force generation may play an important part in invasion and metastasis by mediating invadopodia activity in response to the mechanical properties of the tumor microenvironment.

BMP growth factor signaling in a biomechanical context

Bone Morphogenetic Proteins (BMPs) are members of the transforming growth factor-β superfamily of secreted polypeptide growth factors and are important regulators in a multitude of cellular processes. To ensure the precise and balanced propagation of their pleiotropic signaling responses, BMPs and their corresponding signaling pathways are subject to tight control. A large variety of regulatory mechanisms throughout different biological levels combines into a complex network and provides the basis for physiological BMP function. This regulatory network not only includes biochemical factors but also mechanical cues. Both BMP signaling and mechanotransduction pathways are tightly interconnected and represent an elaborate signaling network active during development but also during organ homeostasis. Moreover, its dysregulation is associated with a number of human pathologies. A more detailed understanding of this crosstalk in respect to molecular interactions will be indispensable in the future, in particular to understand BMP-related diseases as well as with regard to an efficient clinical application of BMP ligands.

The facile generation of two-dimensional stiffness maps in durotactic cell platforms through thickness projections of three-dimensional submerged topography

An innovative platform that aims to facilitate studies of how adherent cells migrate in response to rigidity gradients or durotaxis has been developed. Soft polyacrylamide gel-based cell culture scaffolds are used to fabricate flat surfaces containing elasticity gradients through changes in the underlying patterned features. Moreover, this inert gel surface supports long-term cell viability and offers a tunable stiffness. By manipulating the thickness of the gel substrate through the embedded patterns, this system is also capable of directing collective cell patterning.

A force based model of individual cell migration with discrete attachment sites and random switching terms

A force based model of cell migration is presented which gives new insight into the importance of the dynamics of cell binding to the substrate. The main features of the model are the focus on discrete attachment dynamics, the treatment of the cellular forces as springs, and an incorporation of the stochastic nature of the attachment sites. One goal of the model is to capture the effect of the random binding and unbinding of cell attachments on global cell motion. Simulations reveal one of the most important factor influencing cell speed is the duration of the attachment to the substrate. The model captures the correct velocity and force relationships for several cell types.

Novel Rho/MRTF/SRF inhibitors block matrix-stiffness and TGF-β-induced fibrogenesis in human colonic myofibroblasts

BACKGROUND

Ras homolog gene family, member A (RhoA)/Rho-associated coiled-coil forming protein kinase signaling is a key pathway in multiple types of solid organ fibrosis, including intestinal fibrosis. However, the pleiotropic effects of RhoA/Rho-associated coiled-coil forming protein kinase signaling have frustrated targeted drug discovery efforts. Recent recognition of the role of Rho-regulated gene transcription by serum response factor (SRF) and its transcriptional cofactor myocardin-related transcription factor A (MRTF-A) suggest a novel locus for pharmacological intervention.

METHODS

Because RhoA signaling is mediated by both physical and biochemical stimuli, we examined whether pharmacological inhibition of RhoA or the downstream transcription pathway of MRTF-A/SRF could block intestinal fibrogenesis in 2 in vitro models.

RESULTS

In this study, we demonstrate that inhibition of RhoA signaling blocks both matrix-stiffness and transforming growth factor beta-induced fibrogenesis in human colonic myofibroblasts. Repression of alpha-smooth muscle actin and collagen expression was associated with the inhibition of MRTF-A nuclear localization. CCG-1423, a first-generation Rho/MRTF/SRF pathway inhibitor, repressed fibrogenesis in both models, yet has unacceptable cytotoxicity. Novel second-generation inhibitors (CCG-100602 and CCG-203971) repressed both matrix-stiffness and transforming growth factor beta-mediated fibrogenesis as determined by protein and gene expression in a dose-dependent manner.

CONCLUSIONS

Targeting the Rho/MRTF/SRF mechanism with second-generation Rho/MRTF/SRF inhibitors may represent a novel approach to antifibrotic therapeutics.

A co-culture device with a tunable stiffness to understand combinatorial cell-cell and cell-matrix interactions

Cell behavior on 2-D in vitro cultures is continually being improved to better mimic in vivo physiological conditions by combining niche cues including multiple cell types and substrate stiffness, which are well known to impact cell phenotype. However, no system exists in which a user can systematically examine cell behavior on a substrate with a specific stiffness (elastic modulus) in culture with a different cell type, while maintaining distinct cell populations. We demonstrate the modification of a silicon reconfigurable co-culture system with a covalently linked hydrogel of user-defined stiffness. This device allows the user to control whether two separate cell populations are in contact with each other or only experience paracrine interactions on substrates of controllable stiffness. To illustrate the utility of this device, we examined the role of substrate stiffness combined with myoblast co-culture on adipose derived stem cell (ASC) differentiation and found that the presence of myoblasts and a 10 kPa substrate stiffness increased ASC myogenesis versus co-culture on stiff substrates. As this example highlights, this technology better controls the in vitro microenvironment, allowing the user to develop a more thorough understanding of the combined effects of cell-cell and cell-matrix interactions.

In situ mechanotransduction via vinculin regulates stem cell differentiation

Human mesenchymal stem cell (hMSC) proliferation, migration, and differentiation have all been linked to extracellular matrix stiffness, yet the signaling pathway(s) that are necessary for mechanotransduction remain unproven. Vinculin has been implicated as a mechanosensor in vitro, but here we demonstrate its ability to also regulate stem cell behavior, including hMSC differentiation. RNA interference-mediated vinculin knockdown significantly decreased stiffness-induced MyoD, a muscle transcription factor, but not Runx2, an osteoblast transcription factor, and impaired stiffness-mediated migration. A kinase binding accessibility screen predicted a cryptic MAPK1 signaling site in vinculin which could regulate these behaviors. Indeed, reintroduction of vinculin domains into knocked down cells indicated that MAPK1 binding site-containing vinculin constructs were necessary for hMSC expression of MyoD. Vinculin knockdown does not appear to interfere with focal adhesion assembly, significantly alter adhesive properties, or diminish cell traction force generation, indicating that its knockdown only adversely affected MAPK1 signaling. These data provide some of the first evidence that a force-sensitive adhesion protein can regulate stem cell fate.

Comparing the effect of equiaxial cyclic mechanical stimulation on GATA4 expression in adipose-derived and bone marrow-derived mesenchymal stem cells

Myocardium is prone to mechanical stimuli among which pulsatile blood flow exerts both radial and longitudinal strains on the heart. Recent studies have shown that mechanical stimulation can notably influence regeneration of cardiac muscle cells. GATA4 is a cardiac-specific transcription factor that plays an important role in late embryonic heart development. Our study aimed at investigating the effect of equiaxial cyclic strain on GATA4 expression in adipose-derived (ASCs) and bone marrow-derived (BMSCs) mesenchymal stem cells. For this reason, both ASCs and BMSCs were studied in four distinct groups of chemical, mechanical, mechano-chemical and negative control. According to this categorisation, the cells were exposed to cyclic mechanical loading and/or 5-azacytidine as the chemical factor. The level of GATA4 expression was then quantified using real-time PCR method on the first, fourth and seventh days. The results show that: (1) equiaxial cyclic stimulation of mesenchymal stem cells could promote GATA4 expression from the early days of induction and as it went on, its combination with chemical factor elevated expression; (2) cyclic strain could accelerate GATA4 expression compared to the chemical factor; (3) in this regard, these results indicate a higher capacity of ASCs than BMSCs to express GATA4.

Cross talk between matrix elasticity and mechanical force regulates myoblast traction dynamics

Growing evidence suggests that critical cellular processes are profoundly influenced by the cross talk between extracellular nanomechanical forces and the material properties of the cellular microenvironment. Although many studies have examined either the effect of nanomechanical forces or the material properties of the microenvironment on biological processes, few have investigated the influence of both. Here, we performed simultaneous atomic force microscopy and traction force microscopy to demonstrate that muscle precursor cells (myoblasts) rapidly generate a significant increase in traction when stimulated with a local 10 nN force. Cells were cultured and nanomechanically stimulated on hydrogel substrates with controllable local elastic moduli varying from ~16-89 kPa, as confirmed with atomic force microscopy. Importantly, cellular traction dynamics in response to nanomechanical stimulation only occurred on substrates that were similar to the elasticity of working muscle tissue (~64-89 kPa) as opposed to substrates mimicking resting tissue (~16-51 kPa). The traction response was also transient, occurring within 30 s, and dissipating by 60 s, during constant nanomechanical stimulation. The observed biophysical dynamics are very much dependent on rho-kinase and myosin-II activity and likely contribute to the physiology of these cells. Our results demonstrate the fundamental ability of cells to integrate nanoscale information in the cellular microenvironment, such as nanomechanical forces and substrate mechanics, during the process of mechanotransduction.

Three dimensional spatial separation of cells in response to microtopography

Cellular organization, migration and proliferation in three-dimensions play a critical role in numerous physiological and pathological processes. Nano- and micro-fabrication approaches have demonstrated that nano- and micro-scale topographies of the cellular microenvironment directly impact organization, migration and proliferation. In this study, we investigated these dynamics of two cell types (NIH3T3 fibroblast and MDCK epithelial cells) in response to microscale grooves whose dimensions exceed typical cell sizes. Our results demonstrate that fibroblasts display a clear preference for proliferating along groove ridges whereas epithelial cells preferentially proliferate in the grooves. Importantly, these cell-type dependent behaviours were also maintained when in co-culture. We show that it is possible to spatially separate a mixed suspension of two cell types by allowing them to migrate and proliferate on a substrate with engineered microtopographies. This ability may have important implications for investigating the mechanisms that facilitate cellular topographic sensing. Moreover, our results may provide insights towards the controlled development of complex three-dimensional multi-cellular constructs.

The mechanical environment modulates intracellular calcium oscillation activities of myofibroblasts

Myofibroblast contraction is fundamental in the excessive tissue remodeling that is characteristic of fibrotic tissue contractures. Tissue remodeling during development of fibrosis leads to gradually increasing stiffness of the extracellular matrix. We propose that this increased stiffness positively feeds back on the contractile activities of myofibroblasts. We have previously shown that cycles of contraction directly correlate with periodic intracellular calcium oscillations in cultured myofibroblasts. We analyze cytosolic calcium dynamics using fluorescent calcium indicators to evaluate the possible impact of mechanical stress on myofibroblast contractile activity. To modulate extracellular mechanics, we seeded primary rat subcutaneous myofibroblasts on silicone substrates and into collagen gels of different elastic modulus. We modulated cell stress by cell growth on differently adhesive culture substrates, by restricting cell spreading area on micro-printed adhesive islands, and depolymerizing actin with Cytochalasin D. In general, calcium oscillation frequencies in myofibroblasts increased with increasing mechanical challenge. These results provide new insight on how changing mechanical conditions for myofibroblasts are encoded in calcium oscillations and possibly explain how reparative cells adapt their contractile behavior to the stresses occurring in normal and pathological tissue repair.

A novel 3D fibril force assay implicates src in tumor cell force generation in collagen networks

New insight into the biomechanics of cancer cell motility in 3D extracellular matrix (ECM) environments would significantly enhance our understanding of aggressive cancers and help identify new targets for intervention. While several methods for measuring the forces involved in cell-matrix interactions have been developed, previous to this study none have been able to measure forces in a fibrillar environment. We have developed a novel assay for simultaneously measuring cell mechanotransduction and motility in 3D fibrillar environments. The assay consists of a controlled-density fibrillar collagen gel atop a controlled-stiffness polyacrylamide (PAA) surface. Forces generated by living cells and their migration in the 3D collagen gel were measured with the 3D motion of tracer beads within the PAA layer. Here, this 3D fibril force assay is used to study the role of the invasion-associated protein kinase Src in mechanotransduction and motility. Src expression and activation are linked with proliferation, invasion, and metastasis, and have been shown to be required in 2D for invadopodia membranes to direct and mediate invasion. Breast cancer cell line MDA-MD-231 was stably transfected with GFP-tagged constitutively active Src or wild-type Src. In 3D fibrillar collagen matrices we found that, relative to wild-type Src, constitutively active Src: 1) increased the strength of cell-induced forces on the ECM, 2) did not significantly change migration speed, and 3) increased both the duration and the length, but not the number, of long membrane protrusions. Taken together, these results support the hypothesis that Src controls invasion by controlling the ability of the cell to form long lasting cellular protrusions to enable penetration through tissue barriers, in addition to its role in promoting invadopodia matrix-degrading activity.

The effects of confluency on cell mechanical properties

Mechanical properties of cells depend on various external and internal factors, like substrate stiffness and surface modifications, cell ageing and disease state. Some other currently unknown factors may exist. In this study we used force spectroscopy by AFM, confocal microscopy and flow cytometry to investigate the difference between single non-confluent and confluent (in monolayer) Vero cells. In all cases the stiffness values were fitted by log-normal rather than normal distribution. Log-normal distribution was also found for an amount of cortical actin in cells by flow cytometry. Cells in the monolayer were characterized by a significantly lower (1.4-1.7 times) Young's modulus and amount of cortical actin than in either of the single non-confluent cells or cells migrating in the experimental wound. Young's modulus as a function of indentation speed followed a weak power law for all the studied cell states, while the value of the exponent was higher for cells growing in monolayer. These results show that intercellular contacts and cell motile state significantly influence the cell mechanical properties.

Mesenchymal stem cell durotaxis depends on substrate stiffness gradient strength

Mesenchymal stem cells (MSCs) respond to the elasticity of their environment, which varies between and within tissues. Stiffness gradients within tissues can result from pathological conditions, but also occur through normal variation, such as in muscle. MSC migration can be directed by shallow stiffness gradients before differentiating. Gradients with fine control over substrate compliance - both in range and rate of change (strength) - are needed to better understand mechanical regulation of MSC migration in normal and diseased states. We describe polyacrylamide stiffness gradient fabrication using three distinct systems, generating stiffness gradients of physiological (1 Pa/μm), pathological (10 Pa/μm), and step change (≥ 100Pa/μm) strength. All gradients spanned a range of physiologically relevant elastic moduli for soft tissues (1-12 kPa). MSCs migrated to the stiffest region on each gradient. Time-lapse microscopy revealed that migration velocity correlated directly with gradient strength. Directed migration was reduced in the presence of the contractile agonist lysophosphatidic acid (LPA) and cytoskeleton-perturbing drugs nocodazole and cytochalasin. LPA- and nocodazole-treated cells remained spread and protrusive on the substrate, while cytochalasin-treated cells did not. Nocodazole-treated cells spread in a similar manner to untreated cells, but exhibited greatly diminished traction forces. These data suggest that a functional actin cytoskeleton is required for migration whereas microtubules are required for directed migration. The data also imply that, in vivo, MSCs may preferentially accumulate in regions of high elastic modulus and make a greater contribution to tissue repairs in these locations.

Rigid matrix supports osteogenic differentiation of stem cells from human exfoliated deciduous teeth (SHED)

Stem cell fate can be induced by the grade of stiffness of the extracellular matrix, depending on the developed tissue or complex tissues. For example, a rigid extracellular matrix induces the osteogenic differentiation in bone marrow derived mesenchymal stem cells (MSCs), while a softer surface induces the osteogenic differentiation in dental follicle cells (DFCs). To determine whether differentiation of ectomesenchymal dental precursor cells is supported by similar grades of extracellular matrices (ECMs) stiffness, we examined the influence of the surface stiffness on the proliferation and osteogenic differentiation of stem cells from human exfoliated deciduous teeth (SHED). Cell proliferation of SHED was significantly decreased on cell culture surfaces with a muscle-like stiffness. A dexamethasone-based differentiation medium induced the osteogenic differentiation of SHED on substrates of varying mechanical stiffness. Here, the hardest surface improved the induction of osteogenic differentiation in comparison to that with the softest stiffness. In conclusion, our study showed that the osteogenic differentiation of ectomesenchymal dental precursor cells SHED and DFCs are not supported by similar grades of ECM stiffness.

Control of stem cell fate and function by engineering physical microenvironments

The phenotypic expression and function of stem cells are regulated by their integrated response to variable microenvironmental cues, including growth factors and cytokines, matrix-mediated signals, and cell–cell interactions. Recently, growing evidence suggests that matrix-mediated signals include mechanical stimuli such as strain, shear stress, substrate rigidity and topography, and these stimuli have a more profound impact on stem cell phenotypes than had previously been recognized, e.g. self-renewal and differentiation through the control of gene transcription and signaling pathways. Using a variety of cell culture models enabled by micro and nanoscale technologies, we are beginning to systematically and quantitatively investigate the integrated response of cells to combinations of relevant mechanobiological stimuli. This paper reviews recent advances in engineering physical stimuli for stem cell mechanobiology and discusses how micro- and nanoscale engineered platforms can be used to control stem cell niche environments and regulate stem cell fate and function.

Decoupling polymer properties to elucidate mechanisms governing cell behavior

Determining how a biomaterial interacts with cells ("structure-function relationship") reflects its eventual clinical applicability. Therefore, a fundamental understanding of how individual material properties modulate cell-biomaterial interactions is pivotal to improving the efficacy and safety of clinically translatable biomaterial systems. However, due to the coupled nature of material properties, their individual effects on cellular responses are difficult to understand. Structure-function relationships can be more clearly understood by the effective decoupling of each individual parameter. In this article, we discuss three basic decoupling strategies: (1) surface modification, (2) cross-linking, and (3) combinatorial approaches (i.e., copolymerization and polymer blending). Relevant examples of coupled material properties are briefly reviewed in each section to highlight the need for improved decoupling methods. This follows with examples of more effective decoupling techniques, mainly from the perspective of three primary classes of synthetic materials: polyesters, polyethylene glycol, and polyacrylamide. Recent strides in decoupling methodologies, especially surface-patterning and combinatorial techniques, offer much promise in further understanding the structure-function relationships that largely govern the success of future advancements in biomaterials, tissue engineering, and drug delivery.

BMP2 and mechanical loading cooperatively regulate immediate early signalling events in the BMP pathway

Background

Efficient osteogenic differentiation is highly dependent on coordinated signals arising from growth factor signalling and mechanical forces. Bone morphogenetic proteins (BMPs) are secreted proteins that trigger Smad and non-Smad pathways and thereby influence transcriptional and non-transcriptional differentiation cues. Crosstalk at multiple levels allows for promotion or attenuation of signalling intensity and specificity. Similar to BMPs, mechanical stimulation enhances bone formation. However, the molecular mechanism by which mechanical forces crosstalk to biochemical signals is still unclear.

Results

Here, we use a three-dimensional bioreactor system to describe how mechanical forces are integrated into the BMP pathway. Time-dependent phosphorylation of Smad, mitogen-activated protein kinases and Akt in human fetal osteoblasts was investigated under loading and/or BMP2 stimulation conditions. The phosphorylation of R-Smads is increased both in intensity and duration under BMP2 stimulation with concurrent mechanical loading. Interestingly, the synergistic effect of both stimuli on immediate early Smad phosphorylation is reflected in the transcription of only a subset of BMP target genes, while others are differently affected. Together this results in a cooperative regulation of osteogenesis that is guided by both signalling pathways.

Conclusions

Mechanical signals are integrated into the BMP signalling pathway by enhancing immediate early steps within the Smad pathway, independent of autocrine ligand secretion. This suggests a direct crosstalk of both mechanotransduction and BMP signalling, most likely at the level of the cell surface receptors. Furthermore, the crosstalk of both pathways over longer time periods might occur on several signalling levels.