Protein aggregation and its inhibition in biopharmaceutics

Physical Instabilities of Therapeutic Monoclonal Antibodies: A Critical Review

The proteinaceous nature of monoclonal antibodies (mAbs) makes them highly sensitive to various physical and chemical conditions, thus leading to instabilities that are classified as physical and chemical instabilities. In this review, we are discussing in detail the physical instability of mAbs because a large number of articles previously published solely focus on the chemical aspect of the instability with little coverage on the physical side. The physical instabilities of mAbs are classified into denaturation and aggregation (precipitation, visible and subvisible particles). The mechanism involved in their formation is discussed in the article, along with the pathways correlating the denaturation of mAb or the formation of aggregates to immunogenicity. Further equations like Gibbs-Helmholtz involved in detecting and quantifying denaturation are discussed, along with various factors causing the denaturation. Moreover, questions related to aggregation like the types of aggregates and the pathway involved in their formation are answered in this article. Factors influencing the physical stability of the mAbs by causing denaturation or formation of aggregates involving the structure of the protein, concentration of mAbs, pH of the protein and the formulations, excipients involved in the formulations, salts added to the formulations, storage temperature, light and UV radiation exposure and processing factors are mentioned in this article. Finally, the analytical approaches used for detecting and quantifying the physical instability of mAbs at all levels of structural conformation like far and near UV, infrared spectroscopy, capillary electrophoresis, LC-MS, microflow imagining, circular dichroism and peptide mapping are discussed.

Predicting Experimental B22 Values and the Effects of Histidine Charge States for Monoclonal Antibodies Using Coarse-Grained Molecular Simulations

Static light scattering (SLS) was used to characterize five monoclonal antibodies (MAbs) as a function of total ionic strength (TIS) at pH values between 5.5 and 7.0. Second osmotic virial coefficient (B₂₂) values were determined experimentally for each MAb as a function of TIS using low protein concentration SLS data. Coarse-grained molecular simulations were performed to predict the B₂₂ values for each MAb at a given pH and TIS. To include the effect of charge fluctuations of titratable residues in the B₂₂ calculations, a statistical approach was introduced in the Monte Carlo algorithm based on the protonation probability based on a given pH value and the Henderson-Hasselbalch equation. The charged residues were allowed to fluctuate individually, based on the sampled microstates and the influence of electrostatic interactions on net protein-protein interactions during the simulations. Compared to static charge simulations, the new approach provided improved results compared to experimental B₂₂ values at pH conditions near the pK_a of titratable residues.

Application of Af4-Multidetection to Liraglutide in Its Formulation: Preserving and Representing Native Aggregation

Aggregation is among the most critical parameters affecting the pharmacological and safety profile of peptide Active Pharmaceutical Ingredients (APIs). For this reason, it is of utmost importance to define the exact aggregation state of peptide drugs, particularly when the API is marketed as a ready-to-use solution. Consequently, appropriate non-destructive techniques able to replicate the peptide environment must be employed. In our work, we exploited Asymmetrical Flow Field-Flow Fractionation (AF4), connected to UV, dRI, fluorescence, and MALS detectors, to fully characterize the aggregation state of Liraglutide, a peptide API used for the treatment of diabetes type 2 and chronic obesity. In previous studies, Liraglutide was hypothesized to assemble into hexa-octamers in phosphate buffer, but no information on its behavior in the formulation medium was provided up to now. The method used allowed researchers to work using formulation as the mobile phase with excellent recoveries and LoQ/LoD, discerning between stable and degraded samples, and detecting, when present, aggregates up to 108 Da. The native state of Liraglutide was assessed and found to be an association into pentamers, with a non-spherical conformation. Combined to benchmark analyses, the sameness study was complete and descriptive, also giving insight on the aggregation process and covalent/non-covalent aggregate types.

The Effect of Trehalose Coating for Magnetite Nanoparticles on Stability of Egg White Lysozyme

In this study, the protein stability of hen egg-white lysozymes (HEWL) by Fe₃O₄ and Fe₃O₄-coated trehalose (Fe₃O₄@Tre) magnetic nanoparticles (NPs) is investigated. For this purpose, the co-precipitation method was used to synthesize magnetic NPs. The synthesized NPs were characterized by XRD, FT-IR spectroscopy, FE-SEM, and VSM analysis. In addition, the stability of HEWLs exposed to different NP concentrations in the range of 0.001–0.1 mg mL⁻¹ was investigated by circular dichroism (CD) spectroscopy, fluorescence, and UV-Vis analysis. Based on the results, in the NP concentration range of 0.001–0.04 mg mL⁻¹ the protein structure is more stable, and this range was identified as the range of kosmotropic concentration. The helicity was measured at two concentration points of 0.02 and 0.1 mg mL⁻¹. According to the results, the α-helix at 0.02 mg mL⁻¹ of Fe₃O₄ and Fe₃O₄@Tre was increased from 35.5% for native protein to 37.7% and 38.7%, respectively. The helicity decreased to 36.1% and 37.4%, respectively, with increasing the concentration of Fe₃O₄ and Fe₃O₄@Tre to 0.1 mg mL⁻¹. The formation of hydrated water shells around protein molecules occurred by using Fe₃O₄@Tre NPs. Hence, it can be concluded that the trehalose as a functional group along with magnetic NPs can improve the stability of proteins in biological environments.

Thermal stabilization of diverse biologics using reversible hydrogels

Improving the thermal stability of biologics, including vaccines, is critical to reduce the economic costs and health risks associated with the cold chain. Here, we designed a versatile, safe, and easy-to-use reversible PEG-based hydrogel platform formed via dynamic covalent boronic ester cross-linking for the encapsulation, stabilization, and on-demand release of biologics. Using these reversible hydrogels, we thermally stabilized a wide range of biologics up to 65°C, including model enzymes, heat-sensitive clinical diagnostic enzymes (DNA gyrase and topoisomerase I), protein-based vaccines (H5N1 hemagglutinin), and whole viruses (adenovirus type 5). Our data support a generalized protection mechanism for the thermal stabilization of diverse biologics using direct encapsulation in reversible hydrogels. Furthermore, preliminary toxicology data suggest that the components of our hydrogel are safe for in vivo use. Our reversible hydrogel platform offers a simple material solution to mitigate the costs and risks associated with reliance on a continuous cold chain for biologic transport and storage.

Silver nanoparticle-deposited whey protein isolate amyloid fibrils as catalysts for the reduction of methylene blue

The unique structural characteristics and superior biocompatibility make the protein nanofibers promising immobilization platforms/substrates for catalysts/enzymes. Metal nanoparticles have been employed as the catalysts in industries due to their excellent catalytic activity and stability, whereas their high surface energy leads to nanoparticle aggregation, thereby hampering their catalytic performance. Here, amyloid fibril (AF) derived from whey protein isolate (WPI) was chosen as the support of silver nanoparticles (AgNP) and utilized for the catalytic reduction of methylene blue (MB). The one-dimensional amyloid-based hybrid materials (AgNP/WPI-AF) were first synthesized via chemical or photochemical route. The characterization of AgNP/WPI-AF by UV-vis spectrophotometry and electron microscopy revealed that the sizes of AgNP on WPI-AF's surface ranged from 2 to 30 nm. Next, the catalytic performances of AgNP/WPI-AF prepared by various routes for MB degradation were investigated. Additionally, the kinetic data were analyzed using two different models and the apparent rate constants and thermodynamic parameters were further determined accordingly. Moreover, the reusability of AgNP/WPI-AF was assessed by monitoring the percentage removal of MB over consecutive filtering cycles. Our results indicated that Langmuir-Hinshelwood-type mechanism better described the catalytic MB reduction using AgNP/WPI-AF. This work provides a nice example of application of nanoparticle-amyloid fibril composite materials for catalysis.

Differential Surface Adsorption Phenomena for Conventional and Novel Surfactants Correlates with Changes in Interfacial mAb Stabilization

Protein adsorption on surfaces can result in loss of drug product stability and efficacy during the production, storage, and administration of protein-based therapeutics. Surface-active agents (excipients) are typically added in protein formulations to prevent undesired interactions of proteins on surfaces and protein particle formation/aggregation in solution. The objective of this work is to understand the molecular-level competitive adsorption mechanism between the monoclonal antibody (mAb) and a commercially used excipient, polysorbate 80 (PS80), and a novel excipient, N-myristoyl phenylalanine-N-polyetheramine diamide (FM1000). The relative rate of adsorption of PS80 and FM1000 was studied by pendant bubble tensiometry. We find that FM1000 saturates the interface faster than PS80. Additionally, the surface-adsorbed amounts from X-ray reflectivity (XRR) measurements show that FM1000 blocks a larger percentage of interfacial area than PS80, indicating that a lower bulk FM1000 surface concentration is sufficient to prevent protein adsorption onto the air/water interface. XRR models reveal that with an increase in mAb concentration (0.5-2.5 mg/mL: IV based formulations), an increased amount of PS80 concentration (below critical micelle concentration, CMC) is required, whereas a fixed value of FM1000 concentration (above its relatively lower CMC) is sufficient to inhibit mAb adsorption, preventing mAb from co-existing with surfactants on the surface layer. With this observation, we show that the CMC of the surfactant is not the critical factor to indicate its ability to inhibit protein adsorption, especially for chemically different surfactants, PS80 and FM1000. Additionally, interface-induced aggregation studies indicate that at minimum surfactant concentration levels in protein formulations, fewer protein particles form in the presence of FM1000. Our results provide a mechanistic link between the adsorption of mAbs at the air/water interface and the aggregation induced by agitation in the presence of surfactants.

Protein's Protein Corona: Nanoscale Size Evolution of Human Immunoglobulin G Aggregates Induced by Serum Albumin

Nanoparticles are readily coated by proteins in biological systems. The protein layers on the nanoparticles, which are called the protein corona, influence the biological impacts of the nanoparticles, including internalization into cells and cytotoxicity. This study expands the scope of the nanoparticle's protein corona for exogenous artificial nanoparticles to that for exogenous proteinaceous nanoparticles. Specifically, this study addresses the formation of protein coronas on nanoscale human antibody aggregates with a radius of approximately 20-40 nm, where the antibody aggregates were induced by a pH shift from low to neutral pH. The size of the human immunoglobulin G (hIgG) aggregates grew to approximately 25 times the original size in the presence of human serum albumin (HSA). This size evolution was ascribed to the association of the hIgG aggregates, which was triggered by the formation of the hIgG aggregate's protein corona, i.e., protein's protein corona, consisting of the adsorbed HSA molecules. Because hIgG aggregate association was significantly reduced by the addition of 30-150 mM NaCl, it was attributed to electrostatic attraction, which was supported by molecular dynamics (MD) simulations. Currently, the use of antibodies as biopharmaceuticals is concerning because of undesired immune responses caused by antibody aggregates that are typically generated by a pH shift during the antibody purification process. The present findings suggest that nanoscale antibody aggregates form protein coronas induced by HSA and the resulting nanoscale antibody-HSA complexes are stable in blood containing approximately 150 mM salt ions, at least in terms of the size evolution. Mechanistic insights into protein corona formation on nanoscale antibody aggregates are useful for understanding the unintentional biological impacts of antibody drugs.

Frozen storage of proteins: Use of mannitol to generate a homogenous freeze-concentrate

Therapeutic proteins may be subjected to several freeze-thaw cycles throughout manufacturing and storage. The protein solution composition and the freezing conditions may lead to incomplete ice crystallization in the frozen state. This can also result in freeze-concentrate heterogeneity characterized by multiple glass transition temperatures and protein destabilization. The overall objective was to investigate the potential advantages of including a crystallizing excipient (mannitol) along with a sugar (sucrose or trehalose) for frozen storage. This study showed that the addition of mannitol, a readily crystallizing excipient, facilitated ice crystallization. Inclusion of an isothermal hold during cooling (annealing) maximized the mannitol crystallization and resulted in a homogenous freeze-concentrate of a constant composition characterized by a single glass transition temperature. The role of freezing rate and annealing on both mannitol and ice crystallization were discerned using high intensity synchrotron radiation. The addition of sucrose or trehalose, at an appropriate concentration, stabilized the protein. The mannitol to sugar ratio (3:1 or 1:1, 5 % w/v) was optimized to selectively cause maximal crystallization of mannitol while retaining the sugar amorphous. Human serum albumin (1 mg/mL) in these optimized and annealed compositions did not show any meaningful aggregation, even after multiple freeze-thaw cycles. Thus, in addition to a sugar as a stabilizer, the use of a crystallizing excipient coupled with an annealing step can provide an avenue for frozen storage of proteins.

Yeast-produced fructosamine-3-kinase retains mobility after ex vivo intravitreal injection in human and bovine eyes as determined by Fluorescence Correlation Spectroscopy

Globally, over 2 billion people suffer from vision impairment. Despite complex multifactorial etiology, advanced glycation end products are involved in the pathogenesis of many causative age- and diabetes-related eye diseases. Deglycating enzyme fructosamine-3-kinase (FN3K) was recently proposed as a potential therapeutic, but for further biopharmaceutical development, knowledge on its manufacturability and stability and mobility in the vitreous fluid of the eye is indispensable. We evaluated recombinant production of FN3K in two host systems, and its diffusion behavior in both bovine and human vitreous. Compared to Escherichia coli, intracellular production in Pichia pastoris yielded more and higher purity FN3K. The yeast-produced enzyme was used in a first attempt to use fluorescence correlation spectroscopy to study protein mobility in non-sonicated bovine vitreous, human vitreous, and intact bovine eyes. It was demonstrated that FN3K retained mobility upon intravitreal injection, although a certain delay in diffusion was observed. Alkylation of free cysteines was tolerated both in terms of enzymatic activity and vitreous diffusion. Ex vivo diffusion data gathered and the availability of yeast-produced high purity enzyme now clear the path for in vivo pharmacokinetics studies of FN3K.

Disease-Related Protein Variants of the Highly Conserved Enzyme PAPSS2 Show Marginal Stability and Aggregation in Cells

Cellular sulfation pathways rely on the activated sulfate 3′-phosphoadenosine-5′-phosphosulfate (PAPS). In humans, PAPS is exclusively provided by the two PAPS synthases PAPSS1 and PAPSS2. Mutations found in the PAPSS2 gene result in severe disease states such as bone dysplasia, androgen excess and polycystic ovary syndrome. The APS kinase domain of PAPSS2 catalyzes the rate-limiting step in PAPS biosynthesis. In this study, we show that clinically described disease mutations located in the naturally fragile APS kinase domain are associated either with its destabilization and aggregation or its deactivation. Our findings provide novel insights into possible molecular mechanisms that could give rise to disease phenotypes associated with sulfation pathway genes.

Process- and Product-Related Foulants in Virus Filtration

Regulatory authorities place stringent guidelines on the removal of contaminants during the manufacture of biopharmaceutical products. Monoclonal antibodies, Fc-fusion proteins, and other mammalian cell-derived biotherapeutics are heterogeneous molecules that are validated based on the production process and not on molecular homogeneity. Validation of clearance of potential contamination by viruses is a major challenge during the downstream purification of these therapeutics. Virus filtration is a single-use, size-based separation process in which the contaminating virus particles are retained while the therapeutic molecules pass through the membrane pores. Virus filtration is routinely used as part of the overall virus clearance strategy. Compromised performance of virus filters due to membrane fouling, low throughput and reduced viral clearance, is of considerable industrial significance and is frequently a major challenge. This review shows how components generated during cell culture, contaminants, and product variants can affect virus filtration of mammalian cell-derived biologics. Cell culture-derived foulants include host cell proteins, proteases, and endotoxins. We also provide mitigation measures for each potential foulant.

Poloxamer 188 as surfactant in biological formulations - An alternative for polysorbate 20/80?

Surfactants are used to stabilize biologics. Particularly, polysorbates (Tween® 20 and Tween® 80) dominate the group of surfactants in protein and especially antibody drug products. Since decades drug developers rely on the ethoxylated sorbitan fatty acid ester mixtures to stabilize sensitive molecules such as proteins. Reasons are (i) excellent stabilizing properties, and (ii) well recognized safety and tolerability profile of these polysorbates in humans, especially for parenteral applications. However, over the past decade concerns regarding the stability of these two polysorbates were raised. The search of alternatives with preferably less reservations concerning degradation and product quality reducing issues leads, among others, to poloxamer 188 (e.g. Kolliphor® P188), a nonionic triblock-copolymer surfactant. This review sums up our current knowledge related to the characterization and physico-chemical properties of poloxamer 188, its analytics and stability properties for biological formulations. Furthermore, the advantages and disadvantages as a suitable polysorbate-alternative for the stabilization of biologics are discussed.

Molecular dynamics study on the effects of charged amino acid distribution under low pH condition to the unfolding of hen egg white lysozyme and formation of beta strands

Aggregation of unfolded or misfolded proteins into amyloid fibrils can cause various diseases in humans. However, the fibrils synthesized in vitro can be developed toward useful biomaterials under some physicochemical conditions. In this study, atomistic molecular dynamics simulations were performed to address the mechanism of beta-sheet formation of the unfolded hen egg-white lysozyme (HEWL) under a high temperature and low pH. Simulations of the protonated HEWL at pH 2 and the non-protonated HEWL at pH 7 were performed at the highly elevated temperature of 450 K to accelerate the unfolding, followed by the 333 K temperature to emulate some previous in vitro studies. The simulations showed that HEWL unfolded faster, and higher beta-strand contents were observed at pH 2. In addition, one of the simulation replicas at pH 2 showed that the beta-strand forming sequence was consistent with the ‘K-peptide’, proposed as the core region for amyloidosis in previous experimental studies. Beta-strand formation mechanisms at the earlier stage of amyloidosis were explained in terms of the radial distribution of the amino acids. The separation between groups of positively charged sidechains from the hydrophobic core corresponded to the clustering of the hydrophobic residues and beta-strand formation.

Comprehensive Analysis of Nivolumab, A Therapeutic Anti-Pd-1 Monoclonal Antibody: Impact of Handling and Stress

Nivolumab, formulated in the medicine Opdivo® (10 mg/mL), is a therapeutic monoclonal antibody (mAb) used in the treatment of different types of cancer. Currently, there is insufficient knowledge about the behaviour of this protein with regards to the risk associated with its routine handling or unintentional mishandling, or when subjected to stress conditions in hospitals. These conditions can be simulated in forced degradation studies, which provide an in-depth understanding of the biophysical and biochemical properties of mAbs. In this study, we carried out a physicochemical and functional characterisation of nivolumab, which was subjected to various stress conditions: heat, freeze/thaw cycles, agitation, light exposure and high hypertonic solution. We used a wide range of analytical techniques: Far-UV CD, IT-FS, DLS, SE/UHPLC(UV)-[Native]MS, and ELISA. The results show that exposure to light was the stress test with the greatest impact on the samples, revelling the formation of non-natural dimers and a different isoform profile. In addition, nivolumab (Opdivo®) demonstrated stability up to 60 °C (1 h). As regards functionality all the nivolumab (Opdivo®) stressed samples were found to be stable except for those subjected to light and agitation, and to a lesser extent, those subjected to FTC 5 and NaCl stresses.

Aggregates Associated with Instability of Antibodies during Aerosolization Induce Adverse Immunological Effects

Background: Immunogenicity refers to the inherent ability of a molecule to stimulate an immune response. Aggregates are one of the major risk factors for the undesired immunogenicity of therapeutic antibodies (Ab) and may ultimately result in immune-mediated adverse effects. For Ab delivered by inhalation, it is necessary to consider the interaction between aggregates resulting from the instability of the Ab during aerosolization and the lung mucosa. The aim of this study was to determine the impact of aggregates produced during aerosolization of therapeutic Ab on the immune system. Methods: Human and murine immunoglobulin G (IgG) were aerosolized using a clinically-relevant nebulizer and their immunogenic potency was assessed, both in vitro using a standard human monocyte-derived dendritic cell (MoDC) reporter assay and in vivo in immune cells in the airway compartment, lung parenchyma and spleen of healthy C57BL/6 mice after pulmonary administration. Results: IgG aggregates, produced during nebulization, induced a dose-dependent activation of MoDC characterized by the enhanced production of cytokines and expression of co-stimulatory markers. Interestingly, in vivo administration of high amounts of nebulization-mediated IgG aggregates resulted in a profound and sustained local and systemic depletion of immune cells, which was attributable to cell death. This cytotoxic effect was observed when nebulized IgG was administered locally in the airways as compared to a systemic administration but was mitigated by improving IgG stability during nebulization, through the addition of polysorbates to the formulation. Conclusion: Although inhalation delivery represents an attractive alternative route for delivering Ab to treat respiratory infections, our findings indicate that it is critical to prevent IgG aggregation during the nebulization process to avoid pro-inflammatory and cytotoxic effects. The optimization of Ab formulation can mitigate adverse effects induced by nebulization.

Phase stability of aqueous mixtures of bovine serum albumin with low molecular mass salts in presence of polyethylene glycol

The stability of bovine serum albumin (BSA) solutions against phase separation caused by cooling the system is studied under the combined influence of added poly(ethylene glycol) (PEG) and alkali halide salts in water as solvent. The phase stability of the system depends on the concentration of the added PEG and its molecular mass, the concentration of the low molecular mass electrolyte and its nature, as also on the pH of the solution. More specifically, the addition of NaCl to the BSA-PEG mixture promotes phase separation at pH = 4.0, where BSA carries the net positive charge in aqueous solution, and it increases the stability of the solution at pH=4.6, i.e., near the isoionic point of the protein. Moreover, at pH = 4.6, the cloud-point temperature decreases in the order from NaF to NaI and from LiCl to CsCl. The order of the salts at pH = 4.0 is exactly reversed: LiCl and NaF show the weakest effect on the cloud-point temperature and the strongest decrease in stability is caused by RbCl and NaNO3. An attempt is made to correlate these observations with the free energies of hydration of the added salt ions and with the effect of adsorption of salt ions on the protein surface on the protein-protein interactions. Kosmotropic salt ions decrease the phase stability of BSA-PEG-salt solutions at pH < pI, while exactly the opposite is true at pH = pI.

Investigation of the pH-dependent aggregation mechanisms of GCSF using low resolution protein characterization techniques and advanced molecular dynamics simulations

Granulocyte-colony stimulating factor (GCSF) is a widely used therapeutic protein to treat neutropenia. GCSF has an increased propensity to aggregate if the pH is increased above 5.0. Although GCSF is very well experimentally characterized, the exact pH-dependent aggregation mechanism of GCSF is still under debate. This study aimed to model the complex pH-dependent aggregation behavior of GCSF using state-of-the-art simulation techniques. The conformational stability of GCSF was investigated by performing metadynamics simulations, while the protein-protein interactions were investigated using coarse-grained (CG) simulations of multiple GCSF monomers. The CG simulations were directly compared with small-angle X-ray (SAXS) data. The metadynamics simulations demonstrated that the orientations of Trp residues in GCSF are dependent on pH. The conformational change of Trp residues is due to the loss of Trp-His interactions at the physiological pH, which in turn may increase protein flexibility. The helical structure of GCSF was not affected by the pH conditions of the simulations. Our CG simulations indicate that at pH 4.0, the colloidal stability may be more important than the conformational stability of GCSF. The electrostatic potential surface and CG simulations suggested that the basic residues are mainly responsible for colloidal stability as deprotonation of these residues causes a reduction of the highly positively charged electrostatic barrier close to the aggregation-prone long loop regions.

Electric-field induced modulation of amorphous protein aggregates: polarization, deformation, and reorientation

Proteins in their native state are only marginally stable and tend to aggregate. However, protein misfolding and condensation are often associated with undesired processes, such as pathogenesis, or unwanted properties, such as reduced biological activity, immunogenicity, or uncontrolled materials properties. Therefore, controlling protein aggregation is very important, but still a major challenge in various fields, including medicine, pharmacology, food processing, and materials science. Here, flexible, amorphous, micron-sized protein aggregates composed of lysozyme molecules reduced by dithiothreitol are used as a model system. The preformed amorphous protein aggregates are exposed to a weak alternating current electric field. Their field response is followed in situ by time-resolved polarized optical microscopy, revealing field-induced deformation, reorientation and enhanced polarization as well as the disintegration of large clusters of aggregates. Small-angle dynamic light scattering was applied to probe the collective microscopic dynamics of amorphous aggregate suspensions. Field-enhanced local oscillations of the intensity auto-correlation function are observed and related to two distinguishable elastic moduli. Our results validate the prospects of electric fields for controlling protein aggregation processes.

Electrostatically Driven Protein-Protein Interactions: Quantitative Prediction of Second Osmotic Virial Coefficients to Aid Antibody Design

Electrostatically driven attractions between proteins can result in issues for therapeutic protein formulations such as solubility limits, aggregation, and high solution viscosity. Previous work showed that a model monoclonal antibody displayed large and potentially problematic electrostatically driven attractions at typical pH (5-8) and ionic strength conditions (∼10-100 mM). Molecular simulations of a hybrid coarse-grained model (1bC/D, one bead per charged site and per domain) were used to predict potential point mutations to identify key charge changes (charge-to-neutral or charge-swap) that could greatly reduce the net attractive protein-protein self-interactions. A series of variants were tested experimentally with static and dynamic light scattering to quantify interactions and compared to model predictions at low and intermediate ionic strength. Differential scanning calorimetry and circular dichroism confirmed minimal impact on structural or thermal stability of the variants. The model provided quantitative/semiquantitative predictions of protein self-interactions compared to experimental results as well as showed which amino acid pairings or groups had the most impact.

Macromolecular Crowding Is More than Hard-Core Repulsions

Cells are crowded, but proteins are almost always studied in dilute aqueous buffer. We review the experimental evidence that crowding affects the equilibrium thermodynamics of protein stability and protein association and discuss the theories employed to explain these observations. In doing so, we highlight differences between synthetic polymers and biologically relevant crowders. Theories based on hard-core interactions predict only crowding-induced entropic stabilization. However, experiment-based efforts conducted under physiologically relevant conditions show that crowding can destabilize proteins and their complexes. Furthermore, quantification of the temperature dependence of crowding effects produced by both large and small cosolutes, including osmolytes, sugars, synthetic polymers, and proteins, reveals enthalpic effects that stabilize or destabilize proteins. Crowding-induced destabilization and the enthalpic component point to the role of chemical interactions between and among the macromolecules, cosolutes, and water. We conclude with suggestions for future studies. Expected final online publication date for the Annual Review of Biophysics, Volume 51 is May 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Machine learning prediction of antibody aggregation and viscosity for high concentration formulation development of protein therapeutics

Machine learning has been recently used to predict therapeutic antibody aggregation rates and viscosity at high concentrations (150 mg/ml). These works focused on commercially available antibodies, which may have been optimized for stability. In this study, we measured accelerated aggregation rates at 45°C and viscosity at 150 mg/ml for 20 preclinical and clinical-stage antibodies. Features obtained from molecular dynamics simulations of the full-length antibody and sequences were used for machine learning model construction. We found a k-nearest neighbors regression model with two features, spatial positive charge map on the CDRH2 and solvent-accessible surface area of hydrophobic residues on the variable fragment, gives the best performance for predicting antibody aggregation rates (r = 0.89). For the viscosity classification model, the model with the highest accuracy is a logistic regression model with two features, spatial negative charge map on the heavy chain variable region and spatial negative charge map on the light chain variable region. The accuracy and the area under precision recall curve of the classification model from validation tests are 0.86 and 0.70, respectively. In addition, we combined data from another 27 commercial mAbs to develop a viscosity predictive model. The best model is a logistic regression model with two features, number of hydrophobic residues on the light chain variable region and net charges on the light chain variable region. The accuracy and the area under precision recall curve of the classification model are 0.85 and 0.6, respectively. The aggregation rates and viscosity models can be used to predict antibody stability to facilitate pharmaceutical development.

Nano Differential Scanning Fluorimetry-Based Thermal Stability Screening and Optimal Buffer Selection for Immunoglobulin G

Nano differential scanning fluorimetry (nanoDSF) is a high-throughput protein stability screening technique that simultaneously monitors protein unfolding and aggregation properties. The thermal stability of immunoglobulin G (IgG) was investigated in three different buffers (sodium acetate, sodium citrate, and sodium phosphate) ranging from pH 4 to 8. In all three buffers, the midpoint temperature of thermal unfolding (T_m) showed a tendency to increase as the pH increased, but the aggregation propensity was different depending on the buffer species. The best stability against aggregation was obtained in the sodium acetate buffers below pH 4.6. On the other hand, IgG in the sodium citrate buffer had higher aggregation and viscosity than in the sodium acetate buffer at the same pH. Difference of aggregation between acetate and citrate buffers at the same pH could be explained by a protein-protein interaction study, performed with dynamic light scattering, which suggested that intermolecular interaction is attractive in citrate buffer but repulsive in acetate buffer. In conclusion, this study indicates that the sodium acetate buffer at pH 4.6 is suitable for IgG formulation, and the nanoDSF method is a powerful tool for thermal stability screening and optimal buffer selection in antibody formulations.

Self-Interactions of Two Monoclonal Antibodies: Small-Angle X-ray Scattering, Light Scattering, and Coarse-Grained Modeling

Using light scattering (LS), small-angle X-ray scattering (SAXS), and coarse-grained Monte Carlo (MC) simulations, we studied the self-interactions of two monoclonal antibodies (mAbs), PPI03 and PPI13. With LS measurements, we obtained the osmotic second virial coefficient, B₂₂, and the molecular weight, M_w, of the two mAbs, while with SAXS measurements, we studied the mAbs' self-interaction behavior in the high protein concentration regime up to 125 g/L. Through SAXS-derived coarse-grained representations of the mAbs, we performed MC simulations with either a one-protein or a two-protein model to predict B₂₂. By comparing simulation and experimental results, we validated our models and obtained insights into the mAbs' self-interaction properties, highlighting the role of both ion binding and charged patches on the mAb surfaces. Our models provide useful information about mAbs' self-interaction properties and can assist the screening of conditions driving to colloidal stability.

Slowest-first protein translation scheme: Structural asymmetry and co-translational folding

Proteins are translated from the N to the C terminus, raising the basic question of how this innate directionality affects their evolution. To explore this question, we analyze 16,200 structures from the Protein Data Bank (PDB). We find remarkable enrichment of α helices at the C terminus and β strands at the N terminus. Furthermore, this α-β asymmetry correlates with sequence length and contact order, both determinants of folding rate, hinting at possible links to co-translational folding (CTF). Hence, we propose the "slowest-first" scheme, whereby protein sequences evolved structural asymmetry to accelerate CTF: the slowest of the cooperatively folding segments are positioned near the N terminus so they have more time to fold during translation. A phenomenological model predicts that CTF can be accelerated by asymmetry in folding rate, up to double the rate, when folding time is commensurate with translation time; analysis of the PDB predicts that structural asymmetry is indeed maximal in this regime. This correspondence is greater in prokaryotes, which generally require faster protein production. Altogether, this indicates that accelerating CTF is a substantial evolutionary force whose interplay with stability and functionality is encoded in secondary structure asymmetry.

Positive response to surfactants on the interfacial behavior and aggregation stability of Fab fragments from yolk immunoglobulin

The antigen binding fragment (Fab) is pepsin-digested product from egg yolk immunoglobulin (IgY), which shows lower immunogenicity and higher antibacterial activity. However, it limited the application of Fab due to the spontaneous adsorption and aggregation at the air-liquid interface. The present work is to investigate the effect of surfactants polysorbate 20 (PS20), poloxamer 188 (P188), and polyethylene glycol (PEG) on the aggregation stability of Fab of IgY. The results confirmed the positive role of surfactants in improving Fab stability. PS20 could effectively prevent the generation of Fab aggregates (DLS and light-obscuration analysis). It could also distinctly increase the internal hydrophobicity level, fortify the surface charge by altering the molecular conformational characteristics of Fab. The results of CLSM and surface tension demonstrated that P188 and PEG were co-adsorbed with Fab at the air-liquid interface and inhibited the formation of aggregation. PS20 competitively adsorbed in the gap between Fab molecules to inhibit the formation of aggregates. These findings would give an in-depth understanding of protein aggregation behavior influenced by surfactants and provide a theoretical basis for the development of functional food based on Fab active fragments.

Fate of Antibody and Polysorbate Particles in a Human Serum Model

Monoclonal antibodies (mAbs) and excipients can degrade owing to different stress factors they encounter during their life cycle or after administration in human body. This can result in the formation of aggregates and particulates. As particles can evoke an immune response in patients, it becomes increasingly important to monitor their fate after administration. In this study, we used a protein-free serum model to assess the fate of mAb and polysorbate (PS) particles under physiologic conditions. Commonly encountered stress conditions such as pH, temperature, extrusion, and shaking were chosen to generate mAb particles. Alkaline hydrolysis was used to generate PS particles. The fate of aggregates and particles was evaluated in serum and histidine buffer. We observed that depending on the nature of stress and the environment particles are subjected to, the fate of particles can differ substantially. The mAb aggregates generated by pH stress, showed reduction in HMWS from 26% to 6% over 14days in human serum filtrate. PS particles dissolved at 37°C but remained unaltered in Histidine at 5°C. Our results reinforce the need to track the fate of particles generated during drug product development upon exposure to physiologic conditions.

Expanding the toolbox for predictive parameters describing antibody stability considering thermodynamic and kinetic determinants

PURPOSE

Introduction of the activation energy (E_a) as a kinetic parameter to describe and discriminate monoclonal antibody (mAb) stability.

METHODS

E_a is derived from intrinsic fluorescence (IF) unfolding thermograms. An apparent irreversible three-state fit model based on the Arrhenius integral is developed to determine E_a of respective unfolding transitions. These activation energies are compared to the thermodynamic parameter of van´t Hoff enthalpies (∆H_vh). Using a set of 34 mAbs formulated in four different formulations, both the apparent thermodynamic and kinetic parameters together with apparent melting temperatures are correlated collectively with each other to storage stabilities to evaluate its predictive power with respect to long-term effects potentially reflected in shelf-life.

RESULTS

E_a allows for the discrimination of (i) different parent mAbs, (ii) different variants that originate from parent mAbs, and (iii) different formulations. Interestingly, we observed that the E_a of the CH₂ unfolding transition shows strongest correlations with monomer and aggregate content after storage at accelerated and stress conditions when collectively compared to ∆H_vh and T_m of the CH₂ transition. Moreover, the predictive parameters determined for the CH₂ domain show generally stronger correlations with monomer and aggregate content than those derived for the Fab. Qualitative assessment by ranking E_a of the Fab domain showed good agreement with monomer content in storage stabilities of individual mAb sub-sets.

CONCLUSION

E_a from IF unfolding transitions can be used in addition to other commonly used thermodynamic predictive parameters to discriminate and characterize thermal stability of different mAbs in different formulations. Hence, it shows great potential for antibody engineering and formulation scientists.

Micro-ecology restoration of colonic inflammation by in-Situ oral delivery of antibody-laden hydrogel microcapsules

In-situ oral delivery of therapeutic antibodies, like monoclonal antibody, for chronic inflammation treatment is the most convenient approach compared with other administration routes. Moreover, the abundant links between the gut microbiota and colonic inflammation indicate that the synergistic or antagonistic effect of gut microbiota to colonic inflammation. However, the antibody activity would be significantly affected while transferring through the gastrointestinal tract due to hostile conditions. Moreover, these antibodies have short serum half-lives, thus, require to be frequently administered with high doses to be effective, leading to low patient tolerance. Here, we develop a strategy utilizing thin shell hydrogel microcapsule fabricated by microfluidic technique as the oral delivering carrier. By encapsulating antibodies in these microcapsules, antibodies survive in the hostile gastrointestinal environment and rapidly release into the small intestine through oral administration route, achieving the same therapeutic effect as the intravenous injection evaluated by a colonic inflammation disease model. Moreover, the abundance of some intestinal microorganisms as the indication of the improvement of inflammation has remarkably altered after in-situ antibody-laden microcapsules delivery, implying the restoration of micro-ecology of the intestine. These findings prove our microcapsules are exploited as an efficient oral delivery agent for antibodies with programmable function in clinical application.

1.

This thin shell hydrogel microcapsules using a water-in-water-in-oil as the template by microfluidic technique for orally delivery of antibodies is generated to protect from hostile stomach microenvironment and rapid released in the small intestine without losing their activity.

2.

The shell contains a double crosslinked network attributed to its ionic crosslinking and covalent crosslinking functionalities.

3.

The antibody-laden microcapsules demonstrate great therapeutic efficacy in DSS-induced colonic inflammation disease models, which is approximated to that of the intravenous injection treatment.

4.

Orally taken antibody-laden microcapsules restore the intestinal micro-ecological dysbiosis.

Design of an Ice Recrystallization-Inhibiting Polyampholyte-Containing Graft Polymer for Inhibition of Protein Aggregation

Freezing-induced damage to proteins, through osmotic stress and ice recrystallization, during protein processing and long-term storage is a serious concern and may lead to loss of protein activity owing to denaturation. In this study, graft copolymers composed of a cryoprotective polymer (capable of preventing osmotic stress) and poly(vinyl alcohol) (PVA; known for its high ice recrystallization inhibition (IRI) property) were developed. The polymers had high IRI activity, albeit slightly lower than that of PVA alone, but substantially higher than that of succinylated ε-poly-l-lysine (PLLSA) alone. The graft polymers showed an efficiency higher than that of PVA or PLLSA alone in protecting proteins from multiple freeze-thaw cycles, as well as during prolonged freezing, indicating a synergy between PVA and PLLSA. The PLLSA-based graft polymer is a promising material for use in protein biopharmaceutics for the long-term storage of proteins under freezing conditions.

Enzyme-catalyzed cascade reactions on multienzyme proteinosomes

In this research, to mimic the structures and the functionalities of the organelles in living cells multienzyme proteinosomes with β-galactosidase (β-gal), glucose oxidase (GOx) and horseradish peroxidase (HRP) on the surfaces are fabricated by hydrophobic-interaction induced self-assembly approach. To investigate the mechanism of the formation of proteinosomes, poly(di(ethylene glycol) methyl ether methacrylate) (PDEGMA) and bovine serum albumin are employed in a model system and the study demonstrates that the hydrophobic interaction between the dehydrated polymer chains and the hydrophobic patches on the proteins plays a key role in the fabrication of the proteinosomes. Based on the model system, multienzyme proteinosomes with β-gal, GOx and HRP on the surfaces are fabricated through hydrophobic interaction between PDEGMA and enzyme molecules. Enzyme-catalyzed cascade reactions are performed on the surfaces of the proteinosomes, and the immobilized enzymes show higher bioactivities than the "free" enzymes, due to the direct transfer of the product as a substrate from one enzyme molecule to another. This research provides a unique method for the synthesis of multienzyme proteinosomes with improved bioactivities, and the biofunctional structures will find promising applications in medical and biological science.

Long-term stability predictions of therapeutic monoclonal antibodies in solution using Arrhenius-based kinetics

Long-term stability of monoclonal antibodies to be used as biologics is a key aspect in their development. Therefore, its possible early prediction from accelerated stability studies is of major interest, despite currently being regarded as not sufficiently robust. In this work, using a combination of accelerated stability studies (up to 6 months) and first order degradation kinetic model, we are able to predict the long-term stability (up to 3 years) of multiple monoclonal antibody formulations. More specifically, we can robustly predict the long-term stability behaviour of a protein at the intended storage condition (5 °C), based on up to six months of data obtained for multiple quality attributes from different temperatures, usually from intended (5 °C), accelerated (25 °C) and stress conditions (40 °C). We have performed stability studies and evaluated the stability data of several mAbs including IgG1, IgG2, and fusion proteins, and validated our model by overlaying the 95% prediction interval and experimental stability data from up to 36 months. We demonstrated improved robustness, speed and accuracy of kinetic long-term stability prediction as compared to classical linear extrapolation used today, which justifies long-term stability prediction and shelf-life extrapolation for some biologics such as monoclonal antibodies. This work aims to contribute towards further development and refinement of the regulatory landscape that could steer toward allowing extrapolation for biologics during the developmental phase, clinical phase, and also in marketing authorisation applications, as already established today for small molecules.

Comparing freeze drying and spray drying of interleukins using model protein CXCL8 and its variants

Spray-dried products, such as synthetic peptides and hormones, have already been approved by the U.S. Food and Drug Agency and the European Medicines Agency, while spray-dried antibodies or interleukins, are not yet available on the market. Concerning the latter group, knowledge on whether and how spray-drying (SD) can be performed without adversely affecting their biological activity is lacking. Accordingly, this study aimed at establishing a SD process (Büchi B-90 spray dryer) using three Interleukin-8 based proteins (7-74 kDa) that were dispersed in phosphate buffered saline to maintain their stability. A Box-Behnken Design of Experiments was conducted to identify the appropriate process parameters taking into account the thermal stability of interleukin-8. In parallel, a FD process was developed. Both powders were stored for up to 12 weeks. Powder characterization included residual moisture evaluation and the mean particle size of the SD powder was investigated with Laser Diffraction Analysis. The hydrodynamic volume was measured via size exclusion chromatography and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The secondary structure of the model proteins in the solid state was assessed with Fourier-transformation infrared spectroscopy for detecting the protein folding patterns and reconstituted with Circular Dichroism Spectroscopy. Finally, the binding affinity was studied with Surface Plasmon Resonance and Isothermal Fluorescence Titration, the protein stability with Chaotropic Unfolding, and the activity studies were carried out with the chemotaxis assay. The results showed that SD and FD powders with a residual moisture of less than 5 wt% were obtained. The interleukins showed no unfolding upon processing, neither in solid state nor reconstituted. Oligomerization was observed for FD, but not for SD interleukins. However, the unfolding, binding affinity and activity of all interleukins examined did not decrease in neither SD nor FD powders, even after 12 weeks of storage. Thus, it can be concluded that SD of interleukin formulations at outlet temperatures close to ambient temperature is a promising process for transferring them into a stable powder.

Factors affecting the quality of therapeutic proteins in recombinant Chinese hamster ovary cell culture

Chinese hamster ovary (CHO) cells are the most widely used mammalian host cells for the commercial production of therapeutic proteins. Fed-batch culture is widely used to produce therapeutic proteins, including monoclonal antibodies, because of its operational simplicity and high product titer. Despite technical advances in the development of culture media and cell cultures, it is still challenging to maintain high productivity in fed-batch cultures while also ensuring good product quality. In this review, factors that affect the quality attributes of therapeutic proteins in recombinant CHO (rCHO) cell culture, such as glycosylation, charge variation, aggregation, and degradation, are summarized and categorized into three groups: culture environments, chemical additives, and host cell proteins accumulated in culture supernatants. Understanding the factors that influence the therapeutic protein quality in rCHO cell culture will facilitate the development of large-scale, high-yield fed-batch culture processes for the production of high-quality therapeutic proteins.

Investigation of monoclonal antibody dimers in a final formulated drug by separation techniques coupled to native mass spectrometry

Therapeutic monoclonal antibodies (mAbs) are highly complex proteins that must be exhaustively characterized according to the regulatory authorities' recommendations. MAbs display micro-heterogeneity mainly due to their post-translational modifications, but also to their susceptibility to chemical and physical degradations. Among these degradations, aggregation is quite frequent, initiated by protein denaturation and then dimer formation. Here, we investigated the nature and structure of the high molecular weight species (HMW) present at less than 1% in an unstressed formulated roledumab biopharmaceutical, as a model of high purity mAb. HMW species were first purified through preparative size-exclusion chromatography (SEC) and then analyzed by a combination of chromatographic methods (ion-exchange chromatography (IEX), SEC) coupled to native mass spectrometry (MS), as well as sodium dodecyl sulfate–polyacrylamide gel electrophoresis and capillary gel electrophoresis under non-reducing conditions. Both covalently and non-covalently bound dimers were identified at a proportion of 50/50. In-depth characterization of the HMW fraction by SEC and IEX hyphenated to native MS revealed the presence of three mAb dimer forms having the same mass, but differing by their charge and size. They were attributed to different compact and elongated dimers. Finally, high-resolution middle-up approaches using different enzymes (IdeS and IgdE) were performed to determine the mAb domains implicated in the dimerization. Our results revealed that the roledumab dimers were associated mainly by a single Fab-to-Fab arm-bound association.

A Critical Review of the Use of Surfactant-Coated Nanoparticles in Nanomedicine and Food Nanotechnology

Surfactants, whose existence has been recognized as early as 2800 BC, have had a long history with the development of human civilization. With the rapid development of nanotechnology in the latter half of the 20th century, breakthroughs in nanomedicine and food nanotechnology using nanoparticles have been remarkable, and new applications have been developed. The technology of surfactant-coated nanoparticles, which provides new functions to nanoparticles for use in the fields of nanomedicine and food nanotechnology, is attracting a lot of attention in the fields of basic research and industry. This review systematically describes these "surfactant-coated nanoparticles" through various sections in order: 1) surfactants, 2) surfactant-coated nanoparticles, application of surfactant-coated nanoparticles to 3) nanomedicine, and 4) food nanotechnology. Furthermore, current progress and problems of the technology using surfactant-coated nanoparticles through recent research reports have been discussed.

Nanoparticle-Mediated Angiotensin-(1-9) Drug Delivery for the Treatment of Cardiac Hypertrophy

Ang-(1-9) peptide is a bioactive vasodilator peptide that prevents cardiomyocyte hypertrophy in vitro and in vivo as well as lowers blood pressure and pathological cardiovascular remodeling; however, it has a reduced half-life in circulation, requiring a suitable carrier for its delivery. In this work, hybrid nanoparticles composed of polymeric nanoparticles (pNPs) based on Eudragit^® E/Alginate (EE/Alg), and gold nanospheres (AuNS), were developed to evaluate their encapsulation capacity and release of Ang-(1-9) under different experimental conditions. Hybrid pNPs were characterized by dynamic light scattering, zeta potential, transmission and scanning electron microscopy, size distribution, and concentration by nanoparticle tracking analysis. Nanometric pNPs, with good polydispersity index and colloidally stable, produced high association efficiency of Ang-(1-9) and controlled release. Finally, the treatment of neonatal cardiomyocytes in culture with EE/Alg/AuNS 2% + Ang-(1-9) 20% pNPs decreased the area and perimeter, demonstrating efficacy in preventing norepinephrine-induced cardiomyocyte hypertrophy. On the other hand, the incorporation of AuNS did not cause negative effects either on the cytotoxicity or on the association capacity of Ang-(1-9), suggesting that the hybrid carrier EE/Alg/AuNS pNPs could be used for the delivery of Ang-(1-9) in the treatment of cardiovascular hypertrophy.

Freeze-thaw characterization process to minimize aggregation and enable drug product manufacturing of protein based therapeutics

Physical instabilities of proteins in the form of protein aggregation continue to be a major challenge in the development of protein drug candidates. Aggregation can occur during different stages of product lifecycle such as freeze–thaw, manufacturing, shipping, and storage, and can potentially delay commercialization of candidates. A lack of clear understanding of the underlying mechanism(s) behind protein aggregation and the potential immunogenic reactions renders the presence of aggregates in biotherapeutic products undesirable. Understanding and minimizing aggregation can potentially reduce immunogenic responses and make protein therapeutics safer. Therefore, it is imperative to identify, understand, and control aggregation during early formulation development and develop reliable and orthogonal analytical methodologies to detect and monitor levels of aggregation. Freezing and thawing are typical steps involved in the manufacturing of drug product and could result in complex physical and chemical changes, which in turn could potentially cause protein aggregation. This study provides a systematic approach in understanding and selecting the ideal freeze–thaw conditions for manufacturing of protein-based therapeutics. It identifies the importance of balancing different excipients with an overall goal of sufficiently reducing or eliminating aggregation and developing a stable and scalable formulation. The results demonstrated that the freeze–thaw damage of mAb-1 in aqueous solutions was significantly reduced by identification of optimal freeze–thaw conditions using first a small-scale model with subsequent at-scale verifications. The work provides a framework for successful transfer of drug product manufacturing process from small-scale to the manufacturing scale production environment especially for molecules that are susceptible to freeze–thaw induced degradations.

The modulation of structural stability of horseradish peroxidase as a consequence of macromolecular crowding

Macromolecular crowding plays an inevitable role in all biological processes influencing association, conformation, and other characteristics of proteins. Present study is based on the effect of macromolecular crowding on structure of horseradish peroxidase (HRP) enzyme. Concentration-dependent conformational changes induced by crowding agents, dextran 70 and polyethylene glycol (PEG)-4000, were monitored employing a range of biophysical techniques. The intrinsic fluorescence spectra showed transition of protein from native to unfolded state. Marked increase in 8-Anilino-1-naphthalene-sulphonoic acid and Thioflavin T fluorescence indicated presence of non-native moieties with 80 mg/mL dextran. Enhanced absorbance in turbidity, Soret, and Congo red in corroboration with scattering intensity at 350nm results revealed incidence of HRP aggregates. A new peak around 218 nm in CD spectra pointed towards change in secondary structure towards β-sheets. Significant loss of enzyme activity upon structural disruption was seen. Comet assay demonstrated DNA damage and genotoxic nature of HRP aggregates, supporting spectroscopic, and fluorescence results. The normalized results were obtained with 120 mg/mL PEG-4000 close to that of native HRP implying no disruptive effect on structure. It can be hypothesized that macromolecular crowding is a vital element, which can have diverse effects. In this study, dextran 70 was observed to have pro-aggregatory effect while enhanced stability of native enzyme was witnessed with PEG. Hence, it can be stated that PEG has potentially better crowder as it helps retain the native enzyme structure. Routine addition of crowding agents is recommended if biological molecules are to be studied under more physiologically appropriate environments.

The Role of Cyclodextrins against Interface-Induced Denaturation in Pharmaceutical Formulations: A Molecular Dynamics Approach

Protein-based pharmaceutical products are subject to a variety of environmental stressors, during both production and shelf-life. In order to preserve their structure, and, therefore, functionality, it is necessary to use excipients as stabilizing agents. Among the eligible stabilizers, cyclodextrins (CDs) have recently gained interest in the scientific community thanks to their properties. Here, a computational approach is proposed to clarify the role of β-cyclodextrin (βCD) and 2-hydroxypropyl-β-cyclodextrin (HPβCD) against granulocyte colony-stimulating (GCSF) factor denaturation at the air–water and ice–water interfaces, and also in bulk water at 300 or 260 K. Both traditional molecular dynamics (MD) simulations and enhanced sampling techniques (metadynamics, MetaD) are used to shed light on the underlying molecular mechanisms. Bulk simulations revealed that CDs were preferentially included within the surface hydration layer of GCSF, and even included some peptide residues in their hydrophobic cavity. HPβCD was able to stabilize the protein against surface-induced denaturation in proximity of the air–water interface, while βCD had a destabilizing effect. No remarkable conformational changes of GCSF, or noticeable effect of the CDs, were instead observed at the ice surface. GCSF seemed less stable at low temperature (260 K), which may be attributed to cold-denaturation effects. In this case, CDs did not significantly improve conformational stability. In general, the conformationally altered regions of GCSF seemed not to depend on the presence of excipients that only modulated the extent of destabilization with either a positive or a negative effect.

Comparison of the pH- and thermally-induced fluctuations of a therapeutic antibody Fab fragment by molecular dynamics simulation

Successful development of protein therapeutics depends critically on achieving stability under a range of conditions. A deeper understanding of the drivers of instability across different stress conditions, will enable the engineering of more robust protein scaffolds. We compared the impacts of low pH and high temperature stresses on the structure of a humanized antibody fragment (Fab) A33, using atomistic molecular dynamics simulations, using a recent 2.5 Å crystal structure. This revealed that low-pH induced the loss of native contacts in the domain C_L. By contrast, thermal stress led to 5-7% loss of native contacts in all four domains, and simultaneous loss of >30% of native contacts in the V_L-V_H and C_L-C_H interfaces. This revealed divergent destabilising pathways under the two different stresses. The underlying cause of instability was probed using FoldX and Rosetta mutation analysis, and packing density calculations. These agreed that mutations in the C_L domain, and C_L-C_H1 interface have the greatest potential for stabilisation of Fab A33. Several key salt bridge losses underpinned the conformational change in C_L at low pH, whereas at high temperature, salt bridges became more dynamic, thus contributing to an overall destabilization. Lastly, the unfolding events at the two stress conditions exposed different predicted aggregation-prone regions (APR) to solvent, which would potentially lead to different aggregation mechanisms. Overall, our results identified the early stages of unfolding and stability-limiting regions of Fab A33, and the V_H and C_L domains as interesting future targets for engineering stability to both pH- and thermal-stresses simultaneously.

Non-thermal processing has an impact on the digestibility of the muscle proteins

Muscle proteins undergo several processes before being ready in a final consumable form. All these processes affect the digestibility of muscle proteins and subsequent release of amino acids and peptides during digestion in the human gut. The present review examines the effects of different processing techniques, such as curing, drying, ripening, comminution, aging, and marination on the digestibility of muscle proteins. The review also examines how the source of muscle proteins alters the gastrointestinal protein digestion. Processing techniques affect the structural and functional properties of muscle proteins and can affect their digestibility negatively or positively depending on the processing conditions. Some of these techniques, such as aging and mincing, can induce favorable changes in muscle proteins, such as partial unfolding or exposure of cleavage sites, and increase susceptibility to hydrolysis by digestive enzymes whereas others, such as drying and marination, can induce unfavorable changes, such as severe cross-linking, protein aggregation, oxidation induced changes or increased disulfide (S-S) bond content, thereby decreasing proteolysis. The underlying mechanisms have been discussed in detail and the conclusions drawn in the light of existing knowledge provide information with potential industrial importance.

Analytical Techniques for Structural Characterization of Proteins in Solid Pharmaceutical Forms: An Overview

Therapeutic proteins as biopharmaceuticals have emerged as a very important class of drugs for the treatment of many diseases. However, they are less stable compared to conventional pharmaceuticals. Their long-term stability in solid forms, which is critical for product performance, depends heavily on the retention of the native protein structure during the lyophilization (freeze-drying) process and, thereafter, in the solid state. Indeed, the biological function of proteins is directly related to the tertiary and secondary structure. Besides physical stability and biological activity, conformational stability (three-dimensional structure) is another important aspect when dealing with protein pharmaceuticals. Moreover, denaturation as loss of higher order structure is often a precursor to aggregation or chemical instability. Careful study of the physical and chemical properties of proteins in the dried state is therefore critical during biopharmaceutical drug development to deliver a final drug product with built-in quality that is safe, high-quality, efficient, and affordable for patients. This review provides an overview of common analytical techniques suitable for characterizing pharmaceutical protein powders, providing structural, and conformational information, as well as insights into dynamics. Such information can be very useful in formulation development, where selecting the best formulation for the drug can be quite a challenge.

Glass-like protein condensate for the long-term storage of proteins

Long-term storage of proteins at ambient temperature is required for applications in pharmaceutics and biotechnology. Lyophilization is a versatile approach for stabilizing proteins at ambient temperature, although its freezing and drying processes negatively affect the protein structure. In this study, we show a glass-like protein condensate (GLPC) as a new method for protein stabilization at ambient temperature. Various protein types, including immunoglobulin G, gamma globulin, albumin, and chymotrypsin, formed a glassy state during ultracentrifugation and natural drying, while proteins that tend to crystalize, such as hen egg-white lysozyme, did not. The GLPCs were characterized by a transparent solid state, similar to a dry glass ball. Importantly, the GLPCs were dissolved easily in saline solution at a physiological concentration, thereby retaining their native structures and functions. The GLPCs preserved their native structures even after 1 year of incubation at ambient temperature. These results provide a framework for the development of protein preservation methods at ambient temperature other than lyophilization.