TiO2 nanoparticles in the marine environment: Physical effects responsible for the toxicity on algae Phaeodactylum tricornutum

The effects and mechanisms of polystyrene and polymethyl methacrylate with different sizes and concentrations on Gymnodinium aeruginosum

In this study, Gymnodinium aeruginosum was exposed to polystyrene (PS) and polymethyl methacrylate (PMMA) of three particle sizes (0.1 μm, 1.0 μm and 100 μm) and two concentrations (10 mg/L and 75 mg/L) for 96 h. The density of algae cells, the endpoints that reactive oxygen species (ROS), total protein (TP), malondialdehyde (MDA), superoxide dismutase (SOD) and catalase (CAT), scanning and transmission electron microscopy (SEM and TEM) were used to explore the toxicity mechanism to the microalgae. At a concentration of 75 mg/L, the 96 h inhibition ratios (IR) with particle sizes of 0.1 μm, 1.0 μm and 100 μm on G. aeruginosum were 55.9%, 63.7% and 6.0% for PS, respectively, and 3.0%, 4.1% and -0.6% for PMMA, respectively. The most significant changes in ROS, TP, MDA, SOD and CAT were observed at 75 mg/L 1.0 μm of PS when treated for 96 h. When exposed to nanoplastics (NPs) and microplastics (MPs), the algae cells were damaged, and the antioxidant system was activated. Extracellular polymeric substance (EPS) could help to detoxify the algae. In general, PS was more toxic than PMMA. The toxicity of small MNPs (0.1 μm and 1.0 μm) was related to the concentrations, while large MNPs (100 μm) did not.

Combined toxicity of nano-TiO2 and Cd2+ to Scenedesmus obliquus: Effects at different concentration ratios

The continuous release of manufactured nanomaterials (MNMs) to environments raised concerns on their combined toxicological risks with co-existing contaminants, since MNMs might severely alter the environmental behavior and fate of the contaminants. In this study, the combined toxicity of nano-sized titanium dioxide (nTiO₂) and cadmium (Cd²⁺) to the green alga Scenedesmus obliquus and the underlying physicochemical mechanisms were investigated for the first time at different concentration ratios of Cd²⁺ to nTiO₂ to closely mimic the realistic environment scenarios where the concentration ratios of nTiO₂ to other contaminants are constantly changing. Our results suggested that under the co-exposure to different concentration ratios of Cd²⁺ to nTiO₂, the co-exposure contaminants exhibited three different combined toxicity modes (antagonistic, partially additive, and synergistic). Specifically, antagonistic combined toxicity was observed under co-exposure to a low concentration ratio of nTiO₂ to Cd²⁺ as the absorption by nTiO₂ decreased the bioavailability of Cd²⁺. However, the partially additive and synergistic combined toxicity occurred when the proportion of nTiO₂ in the co-exposure system was relatively high, which would mechanically and/or oxidatively damage the alga cell structures. Even worse, as a carrier of Cd²⁺, nTiO₂ enhanced the amount of Cd²⁺ entering cells, which significantly enhanced the toxicity of Cd²⁺ to algae. Overall, we demonstrated that concentration ratios of nTiO₂ to Cd²⁺ play an important role in determining the combined toxicity mode, which would provide a novel reference to environmental and health risk assessment of co-exposure to conventional pollutants and MNMs.

Influence of Titanium Dioxide Nanoparticles on Human Health and the Environment

Nanotechnology has enabled tremendous breakthroughs in the development of materials and, nowadays, is well established in various economic fields. Among the various nanomaterials, TiO₂ nanoparticles (NPs) occupy a special position, as they are distinguished by their high availability, high photocatalytic activity, and favorable price, which make them useful in the production of paints, plastics, paper, cosmetics, food, furniture, etc. In textiles, TiO₂ NPs are widely used in chemical finishing processes to impart various protective functional properties to the fibers for the production of high-tech textile products with high added value. Such applications contribute to the overall consumption of TiO₂ NPs, which gives rise to reasonable considerations about the impact of TiO₂ NPs on human health and the environment, and debates regarding whether the extent of the benefits gained from the use of TiO₂ NPs justifies the potential risks. In this study, different TiO₂ NPs exposure modes are discussed, and their toxicity mechanisms—evaluated in various in vitro and in vivo studies—are briefly described, considering the molecular interactions with human health and the environment. In addition, in the conclusion of this study, the toxicity and biocompatibility of TiO₂ NPs are discussed, along with relevant risk management strategies.

Ecotoxicological effects of new generation pollutants (nanoparticles, amoxicillin and white musk) on freshwater and marine phytoplankton species

Phytoplankton occupies a key trophic level in aquatic ecosystems. Chemical impacts on these primary producers can disrupt the integrity of an entire ecosystem. Two freshwater (Pseudokirchneriella subcapitata-Ps and Scenedesmus obliquus-S) and three marine (Phaeodactylum tricornutum-P, Isochrysis galbana-I, Tetraselmis suecica-T) microalgae species were exposed to dilutions of four chemicals: nanoparticles (n-TiO₂, n-ZnO), amoxicillin (antibiotic), and white musk (personal care fragrance) to determine the half maximal effective concentration (EC₅₀) after 72 h of exposure under standardized and controlled environmental conditions. Cell cultures were exposed to EC₅₀ to determine sublethal effects (72 h) based on biochemical (chlorophylls a, b, c), molecular (changes in outer cell wall structure), and morphological alterations. We report for the first time EC₅₀ values for nanoparticles in not standardized species (S, I and T) and for amoxicillin and white musk in all tested species. Standardized species (Ps and P) were less sensitive than non-standardized in some cases. Fourier-transformed infrared spectroscopy showed a marked spectral alteration (from 10.44% to 90.93%) of treated cultures compared to negative controls; however, principal component analysis disclosed no differences in molecular alteration between the five microalgae species or the two aquatic habitats considered. There was a significant decrease in chlorophylls content in all species exposed to EC₅₀ compared to controls (Kruskal Wallis test; p < 0.05). There was a significant increase in cell-size (Mann-Whitney U test; p < 0.05) in I, P and T exposed to white musk and S exposed to amoxicillin. Findings highlight ecotoxicological risks from new generation pollutants for primary producers in aquatic ecosystems.

Toxicity evaluation of nano-TiO2 in the presence of functionalized microplastics at two trophic levels: Algae and crustaceans

The rising use of contaminants such as nanoparticles and microplastics has taken a heavy toll on the marine environment. However, their combined toxic effects on the species across various trophic levels remain quite unexplored. The aim of this study was to explore the effects of three surface-functionalized (carboxylated, plain, and aminated) polystyrene microplastics on nano-TiO₂ toxicity across two trophic levels containing Chlorella sp. as the prey and Artemia salina as the predator. The experiments carried out on Chlorella sp. include the toxicity assessment, oxidative stress determination, and uptake of nano-TiO₂ (both in the presence and absence of microplastics). Results revealed that the aminated and plain polystyrene microplastics enhanced nano-TiO₂ toxicity, while carboxylated microplastics decreased the toxic effects in Chlorella sp. On the other hand, toxicity assessment in Artemia salina was carried out using two different modes of exposure: aqueous and dietary routes. The aqueous route involving the direct exposure of nano-TiO₂ and microplastics indicated greater toxicity, uptake, and accumulation in Artemia salina than the dietary route of exposure. Since dietary exposure decreased the toxicity, uptake, and accumulation of nano-TiO₂, no change (p > 0.05) in the biomagnification factors of nano-TiO₂ was noted for all the test concentrations of nano-TiO₂ combined with and without microplastics. The computed values were less than 1, indicating negligible transfer of nano-TiO₂ from Chlorella sp. to Artemia salina. Overall, the study highlights the two-level trophic toxicity and the transfer potential of nano-TiO₂ under the influence of different microplastics.

Smart Adsorbents for Aquatic Environmental Remediation

A noticeable interest and steady rise in research studies reporting the design and assessment of smart adsorbents for sequestering aqueous metal ions and xenobiotics has occurred in the last decade. This motivates compiling and reviewing the characteristics, potentials, and performances of this new adsorbent generation's metal ion and xenobiotics sequestration. Herein, stimuli-responsive adsorbents that respond to its media (as internal triggers; e.g., pH and temperature) or external triggers (e.g., magnetic field and light) are highlighted. Readers are then introduced to selective adsorbents that selectively capture materials of interest. This is followed by a discussion of self-healing and self-cleaning adsorbents. Finally, the review ends with research gaps in material designs.

The impacts of metal-based engineered nanomaterial mixtures on microbial systems: A review

The last decade has witnessed tremendous growth in the commercial use of metal-based engineered nanomaterials (ENMs) for a wide range of products and processes. Consequently, direct and indirect release into environmental systems may no longer be considered negligible or insignificant. Yet, there is an active debate as to whether there are real risks to human or ecological health with environmental exposure to ENMs. Previous research has focused primarily on the acute effects of individual ENMs using pure cultures under controlled laboratory environments, which may not accurately reveal the ecological impacts of ENMs under real environmental conditions. The goal of this review is to assess our current understanding of ENM effects as we move from exposure of single to multiple ENMs or microbial species. For instance, are ENMs' impacts on microbial communities predicted by their intrinsic physical or chemical characteristics or their effects on single microbial populations; how do chronic ENM interactions compare to acute toxicity; does behavior under simplified laboratory conditions reflect that in environmental media; finally, is biological stress modified by interactions in ENM mixtures relative to that of individual ENM? This review summarizes key findings and our evolving understanding of the ecological effects of ENMs under complex environmental conditions on microbial systems, identifies the gaps in our current knowledge, and indicates the direction of future research.

Toxicity of a Binary Mixture of TiO2 and Imidacloprid Applied to Chlorella vulgaris

Nanoparticles have applications in various fields such as manufacturing and materials synthesis, the environment, electronics, energy harvesting, and medicine. Besides many applications of nanoparticles, further research is required for toxic environmental effect investigation. The toxic effect of titanium dioxide nanoparticles on the physiology of the green alga Chlorella vulgaris was studied with a widely used pesticide, imidacloprid (IMD). Chlorella vulgaris was exposed for 120 h in Bold's basal medium to different toxic compounds, such as (i) a high concentration of TiO₂ nanoparticles, 150-2000 mg/L, usually optimised in the photocatalytic degradation of wastewater, (ii) an extremely toxic pesticide for the aquatic environment, imidacloprid, in concentrations ranging from 5 to 40 mg/L, (iii) TiO₂ nanoparticles combined with imidacloprid, usually used in a photocatalytic system. The results show that the TiO₂ nanoparticles and IMD inhibited Chlorella vulgaris cell growth and decreased the biovolume by approximately 80% when 2 g/L TiO₂ was used, meaning that the cells devised a mechanism to cope with a potentially stressful situation; 120 h of Chlorella vulgaris exposure to 40 mg/L of IMD resulted in a 16% decreased cell diameter and a 41% decrease in cell volume relative to the control sample, associated with the toxic effect of pesticides on the cells. Our study confirms the toxicity of nanoparticles through algal growth inhibition with an effective concentration (EC50) value measured after 72 h of 388.14 mg/L for TiO₂ and 13 mg/L for IMD in a single-toxic system. The EC50 of TiO₂ slowly decreased from 258.42 to 311.11 mg/L when IMD from 5 to 20 mg/L was added to the binary-toxic system. The concentration of TiO₂ in the binary-toxic system did not change the EC50 for IMD, and its value was 0.019 g/L. The photodegradation process of imidacloprid (range of 5-40 mg/L) was also investigated in the algal medium incubated with 150-600 mg/L of titanium dioxide.

Review of aquatic toxicity of pharmaceuticals and personal care products to algae

Pharmaceuticals and Personal Care Products (PPCPs) have been frequently detected in the environment around the world. Algae play a significant role in aquatic ecosystem, thus the influence on algae may affect the life of higher trophic organisms. This review provides a state-of-the-art overview of current research on the toxicity of PPCPs to algae. Nanoparticles, contained in personal care products, also have been considered as the ingredients of PPCPs. PPCPs could cause unexpected effects on algae and their communities. Chlorophyta and diatoms are more accessible and sensitive to PPCPs. Multiple algal endpoints should be considered to provide a complete evaluation on PPCPs toxicity. The toxicity of organic ingredients in PPCPs could be predicted through quantitative structure-activity relationship model, whereas the toxicity of nanoparticles could be predicted with limitations. Light irradiation can change the toxicity through affecting algae and PPCPs. pH and natural organic matter can affect the toxicity through changing the existence of PPCPs. For joint and tertiary toxicity, experiments could be conducted to reveal the toxic mechanism. For multiple compound mixture toxicity, concentration addition and independent addition models are preferred. However, there has no empirical models to study nanoparticle-contained mixture toxicity. Algae-based remediation is an emerging technology to prevent the release of PPCPs from water treatment plants. Although many individual algal species are identified for removing a few compounds from PPCPs, algal-bacterial photobioreactor is a preferable alternative, with higher chances for industrial applications.

Environmentally relevant concentrations of titanium dioxide nanoparticles pose negligible risk to marine microbes

Nano-sized titanium dioxide (nTiO₂) represents the highest produced nanomaterial by mass worldwide and, due to its prevalent industrial and commercial use, it inevitably reaches the natural environment. Previous work has revealed a negative impact of nTiO₂ upon marine phytoplankton growth, however, studies are typically carried out at concentrations far exceeding those measured and predicted to occur in the environment currently. Here, a series of experiments were carried out to assess the effects of both research-grade nTiO₂ and nTiO₂ extracted from consumer products upon the marine dominant cyanobacterium, Prochlorococcus, and natural marine communities at environmentally relevant and supra-environmental concentrations (i.e., 1 μg L^-1 to 100 mg L^-1). Cell declines observed in Prochlorococcus cultures were associated with the extensive aggregation behaviour of nTiO₂ in saline media and the subsequent entrapment of microbial cells. Hence, higher concentrations of nTiO₂ particles exerted a stronger decline of cyanobacterial populations. However, within natural oligotrophic seawater, cultures were able to recover over time as the nanoparticles aggregated out of solution after 72 h. Subsequent shotgun proteomic analysis of Prochlorococcus cultures exposed to environmentally relevant concentrations confirmed minimal molecular features of toxicity, suggesting that direct physical effects are responsible for short-term microbial population decline. In an additional experiment, the diversity and structure of natural marine microbial communities showed negligible variations when exposed to environmentally relevant nTiO₂ concentrations (i.e., 25 μg L^-1). As such, the environmental risk of nTiO₂ towards marine microbial species appears low, however the potential for adverse effects in hotspots of contamination exists. In future, research must be extended to consider any effect of other components of nano-enabled product formulations upon nanomaterial fate and impact within the natural environment.

TiO2 nanoparticles enhanced bioaccumulation and toxic performance of PAHs via trophic transfer

Engineering nanoparticles (NPs) could act as accumulator and carrier of co-contaminants, affecting their fate and toxicity in environments. However, the effects of NPs on the bioaccumulation and trophic transfer of co-contaminants through the food chain and the ensuing effects on higher predators are unclear. In the present study, we investigated the effects of titanium dioxide nanoparticles (nTiO₂) on the trophic transfer of phenanthrene (Phe) from prey Artemia salina to predator Scophthalmus maximus. We also evaluated the ensuing toxic performance of Phe in S. maximus after been transferred from A. salina in the presence and absence of nTiO₂. The presence of nTiO₂ significantly (p < 0.05) increased Phe accumulation in A. salina with higher bioconcentration factor (BCF) up to 90.9 than that of 38.6 in Phe exposure along. After trophic transfer, nTiO₂ (1 mg/L) also promoted the bioaccumulation of Phe (1 μg/L) in predator S. maximus from 4.17 mg/kg to 7.85 mg/kg (dry weight). However, nTiO₂ did not enhance the trophic transfer of Phe from A. salina to S. maximus since the biological magnification factor (BMF) decreased from 0.13 to 0.08. Nevertheless, the nTiO₂-enhanced bioaccumulation of Phe did enhance Phe toxicity performance in predator S. maximus after trophic transfer, showing significant (p < 0.05) growth inhibition and changes of nutrient status in the predator, compared to those of the control. Further physio-biochemical investigations suggested that oxidative stress and inhibition of digestive functions might explain the growth inhibition in treatment with nTiO₂ + Phe. This study demonstrates the first evidence that NP-enhanced bioaccumulation and toxic performance of co-existing pollutants across trophic transfer, which poses potential risks to marine ecosystems, and ultimately human health by seafood consumption.

Mechanism of nanotoxicity in Chlorella vulgaris exposed to zinc and iron oxide

•

Growth kinetics of C. vulgaris is influenced by NPs exposure.

•

NPs exposure influence proline, carotenoid, activity of SOD, CAT and LDH.

•

NPs exposure disintegrate cellular membrane.

•

Zinc and iron oxide NPs are more toxic to C. vulgaris compared to bulk counterpart.

Usage of nanoparticle in various products has increased tremendously in the recent past. Toxicity of these nanoparticles can have a huge impact on aquatic ecosystem. Algae are the ideal organism of the aquatic ecosystem to understand the toxicity impact of nanoparticles. The present study focuses on the toxicity evaluation of zinc oxide (ZnO) and iron oxide (Fe₂O₃) nanoparticles towards freshwater microalgae, Chlorella vulgaris. The dose dependent growth retardation in Chlorella vulgaris is observed under ZnO and Fe₂O₃ nanoparticles and nanoform attributed more toxicity than their bulk counterparts. The IC₅₀ values of ZnO and Fe₂O₃ nanoparticles was reported at 0.258 mg L⁻¹ and 12.99 mg L^-1 whereas, for the bulk-form, it was 1.255 mgL^-1 and 17.88 mg L⁻¹, respectively. The significant decline in chlorophyll content and increase in proline content, activity of superoxide dismutase and catalase, indicated the stressful physiological state of microalgae. An increased lactate dehydrogenase level in treated samples suggested membrane disintegration by ZnO and Fe₂O₃ nanoparticles. Compound microscopy, scanning electron microscopy and transmission electron microscopy confirm cell entrapment, deposition of nanoparticles on the cell surface and disintegration of algal cell wall. Higher toxicity of nanoform in comparison to bulk chemistry is a point of concern.

Too small to matter? Physicochemical transformation and toxicity of engineered nTiO2, nSiO2, nZnO, carbon nanotubes, and nAg

Engineered nanomaterials (ENMs) refer to a relatively novel class of materials that are increasingly prevalent in various consumer products and industrial applications - most notably for their superlative physicochemical properties when compared with conventional materials. However, consumer products inevitably degrade over the course of their lifetime, releasing ENMs into the environment. These ENMs undergo physicochemical transformations and subsequently accumulate in the environment, possibly leading to various toxic effects. As a result, a significant number of studies have focused on identifying the possible transformations and environmental risks of ENMs, with the objective of ensuring a safe and responsible application of ENMs in consumer products. This review aims to consolidate the results from previous studies related to each stage of the pathway of ENMs from being embodied in a product to disintegration/transformation in the environment. The scope of this work was defined to include the five most prevalent ENMs based on recent projected production market data, namely: nTiO₂, nSiO₂, nZnO, carbon nanotubes, and nAg. The review focuses on: (i) models developed to estimate environmental concentrations of ENMs; (ii) the possible physicochemical transformations; (iii) cytotoxicity and genotoxicity effects specific to each ENM selected; and (iv) a discussion to identify potential gaps in the studies conducted and recommend areas where further investigation is warranted.

Mitigating the toxic effects of CdSe quantum dots towards freshwater alga Scenedesmus obliquus: Role of eco-corona

The extensive use of semiconducting nanoparticles such as quantum dots in biomedical and industrial products can lead to their inadvertent release into the freshwater system. Natural exudates in the aquatic system comprising extracellular polymeric substance (EPS) and protein-rich metabolites can eventually adsorb onto the quantum dots (QDs) surface and form an eco-corona. The alterations in the physio-chemical and toxicological behavior of CdSe/ZnS QDs under the influence of eco-corona in the freshwater system have not been explored yet. In the present study, lake water medium conditioned with exudate secreted by Scenedesmus obliquus was utilized as an eco-corona forming matrix. The time-based evolution of the eco-corona on the differently charged CdSe/ZnS QDs was analyzed using transmission electron microscopy and dynamic light scattering. Aging of amine-QDs in algal exudate for 72 h showed enhanced aggregation (Mean Hydrodynamic Diameter- 1969 nm) as compared to carboxyl-QDs (1543 nm). Further, eco-coronation tends to impart an overall negative charge to the QDs. The fluorescence intensity of amine-QDs was quenched by 84% due to the accumulation of higher eco-corona. An integrative effect of surface charge and accumulated eco-corona layer influenced the Cd²⁺ ion leaching from the QDs. An enhancement in the algal cell viability treated with carboxyl - CdSe/ZnS (90%) and amine- CdSe/ZnS QDs (94%) aged for 72 h suggested that eco-corona can effectively mitigate the inherent toxicity of the QDs. The oxidative stress markers in the algal cells (LPO, SOD, and CAT) were in correlation with the cytotoxicity results. The algal photosynthetic efficiency depended on the deposition of eco-coronated QDs on the cell surface. Cellular uptake results indicated low Cd²⁺ concentration of nearly 13.9 and 11.5% for carboxyl- and amine- CdSe/ZnS QDs respectively. This suggests that eco-coronation directly influences the bioavailability of engineered nanoparticles.

Atmospheric Processing of Iron-Bearing Mineral Dust Aerosol and Its Effect on Growth of a Marine Diatom, Cyclotella meneghiniana

Iron (Fe) is a growth-limiting micronutrient for phytoplankton in major areas of oceans and deposited wind-blown desert dust is a primary Fe source to these regions. Simulated atmospheric processing of four mineral dust proxies and two natural dust samples followed by subsequent growth studies of the marine planktic diatom Cyclotella meneghiniana in artificial sea-water (ASW) demonstrated higher growth response to ilmenite (FeTiO₃) and hematite (α-Fe₂O₃) mixed with TiO₂ than hematite alone. The processed dust treatment enhanced diatom growth owing to dissolved Fe (DFe) content. The fresh dust-treated cultures demonstrated growth enhancements without adding such dissolved Fe. These significant growth enhancements and dissolved Fe measurements indicated that diatoms acquire Fe from solid particles. When diatoms were physically separated from mineral dust particles, the growth responses become smaller. The post-mineralogy analysis of mineral dust proxies added to ASW showed a diatom-induced increased formation of goethite, where the amount of goethite formed correlated with observed enhanced growth. The current work suggests that ocean primary productivity may not only depend on dissolved Fe but also on suspended solid Fe particles and their mineralogy. Further, the diatom C. meneghiniana benefits more from mineral dust particles in direct contact with cells than from physically impeded particles, suggesting the possibility for alternate Fe-acquisition mechanism/s.

A review on in vivo and in vitro nanotoxicological studies in plants: A headlight for future targets

Owing to the unique properties and useful applications in numerous fields, nanomaterials (NMs) received a great attention. The mass production of NMs has raised major concern for the environment. Recently, some altered growth patterns in plants have been reported due to the plant-NMs interactions. However, for NMs safe applications in agriculture and medicine, a comprehensive understanding of bio-nano interactions is crucial. The main goal of this review article is to summarize the results of the toxicological studies that have shown the in vitro and in vivo interactions of NMs with plants. The toxicity mechanisms are briefly discussed in plants as the defense mechanism works to overcome the stress caused by NMs implications. Indeed, the impact of NMs on plants varies significantly with many factors including physicochemical properties of NMs, culture media, and plant species. To investigate the impacts, dose metrics is an important analysis for assaying toxicity and is discussed in the present article to broadly open up different aspects of nanotoxicological investigations. To access reliable quantification and measurement in laboratories, standardized methodologies are crucial for precise dose delivery of NMs to plants during exposure. Altogether, the information is significant to researchers to describe restrictions and future perspectives.

Accumulation and cellular toxicity of engineered metallic nanoparticle in freshwater microalgae: Current status and future challenges

Metal nanoparticles (MNPs) are employed in a variety of medical and non-medical applications. Over the past two decades, there has been substantial research on the impact of metallic nanoparticles on algae and cyanobacteria, which are at the base of aquatic food webs. In this review, the current status of our understanding of mechanisms of uptake and toxicity of MNPs and metal ions released from MNPs after dissolution in the surrounding environment were discussed. Also, the trophic transfer of MNPs in aquatic food webs was analyzed in this review. Approximately all metallic nanoparticles cause toxicity in algae. Predominantly, MNPs are less toxic compared to their corresponding metal ions. There is a sufficient evidence for the trophic transfer of MNPs in aquatic food webs. Internalization of MNPs is indisputable in algae, however, mechanisms of their transmembrane transport are inadequately known. Most of the toxicity studies are carried out with solitary species of MNPs under laboratory conditions rarely found in natural ecosystems. Oxidative stress is the primary toxicity mechanism of MNPs, however, oxidative stress seems a general response predictable to other abiotic stresses. MNP-specific toxicity in an algal cell is yet unknown. Lastly, the mechanism of MNP internalization, toxicity, and excretion in algae needs to be understood carefully for the risk assessment of MNPs to aquatic biota.

Are Titania Photocatalysts and Titanium Implants Safe? Review on the Toxicity of Titanium Compounds

Titanium and its compounds are broadly used in both industrial and domestic products, including jet engines, missiles, prostheses, implants, pigments, cosmetics, food, and photocatalysts for environmental purification and solar energy conversion. Although titanium/titania-containing materials are usually safe for human, animals and environment, increasing concerns on their negative impacts have been postulated. Accordingly, this review covers current knowledge on the toxicity of titania and titanium, in which the behaviour, bioavailability, mechanisms of action, and environmental impacts have been discussed in detail, considering both light and dark conditions. Consequently, the following conclusions have been drawn: (i) titania photocatalysts rarely cause health and environmental problems; (ii) despite the lack of proof, the possible carcinogenicity of titania powders to humans is considered by some authorities; (iii) titanium alloys, commonly applied as implant materials, possess a relatively low health risk; (iv) titania microparticles are less toxic than nanoparticles, independent of the means of exposure; (v) excessive accumulation of titanium in the environment cannot be ignored; (vi) titanium/titania-containing products should be clearly marked with health warning labels, especially for pregnant women and young children; (vi) a key knowledge gap is the lack of comprehensive data about the environmental content and the influence of titania/titanium on biodiversity and the ecological functioning of terrestrial and aquatic ecosystems.

TiO2 Nanoparticles in the Marine Environment: Enhancing Bioconcentration, While Limiting Biotransformation of Arsenic in the Mussel Perna viridis

The increasing use of nanoscale TiO₂ particles (nTiO₂) and their subsequent leakage into aquatic environments poses a threat to the ecosystem. One major concern is that nTiO₂ may alter the environmental behaviors of arsenic (As) and disrupt the equilibrium of As accumulation and speciation in organisms. In this study, we investigated the effects of nTiO₂ on the bioaccumulation and biotransformation of As(V) in the mussel Perna viridis. Exposure to nTiO₂ significantly increased As accumulation in mussels. Our As speciation analysis demonstrated that nTiO₂ treatment increased the proportion of inorganic As and reduced that of organic As, displaying inhibitory effects on the methylation and detoxification of inorganic As in mussels. Analysis of enzyme systems related to As metabolism in mussels demonstrated that nTiO₂ might limit the methylation of inorganic As by suppressing the GST activity and GSH content. The strong adsorption capacity and weak desorption rate of As by nTiO₂, which could result in the disruption of As distribution and decrease of the amount of As involved in biotransformation, might serve as another mechanism to the limition on As methylation in mussels. Moreover, exposure to nTiO₂ disturbed the osmotic adjustment system in mussels by reducing arsenobetaine and Na⁺-K⁺-ATPase activity, resulting in enhanced toxicity of As after coexposure. The findings indicate, for the first time, that nTiO₂ can block the transformation and detoxification of As in mussels, which would increase the risk of As to marine animals and even humans via the food chain, and may disrupt the biogeochemical cycle of As in natural environments.

Microalgal ecotoxicity of nanoparticles: An updated review

Nowadays, nanotechnology and its related industries are becoming a rapidly explosive industry that offers many benefits to human life. However, along with the increased production and use of nanoparticles (NPs), their presence in the environment creates a high risk of increasing toxic effects on aquatic organisms. Therefore, a large number of studies focusing on the toxicity of these NPs to the aquatic organisms are carried out which used algal species as a common biological model. In this review, the influences of the physio-chemical properties of NPs and the response mechanisms of the algae on the toxicity of the NPs were discussed focusing on the "assay" studies. Besides, the specific algal toxicities of each type of NPs along with the NP-induced changes in algal cells of these NPs are also assessed. Almost all commonly-used NPs exhibit algal toxicity. Although the algae have similarities in the symptoms under NP exposure, the sensitivity and variability of each algae species to the inherent properties of each NPs are quite different. They depend strongly on the concentration, size, characteristics of NPs, and biochemical nature of algae. Through the assessment, the review identifies several gaps that need to be further studied to make an explicit understanding. The findings in the majority of studies are mostly in laboratory conditions and there are still uncertainties and contradictory/inconsistent results about the behavioral effects of NPs under field conditions. Besides, there remains unsureness about NP-uptake pathways of microalgae. Finally, the toxicity mechanisms of NPs need to be thoughtfully understood which is essential in risk assessment.

Effects of environmental factors on the growth and microcystin production of Microcystis aeruginosa under TiO2 nanoparticles stress

Due to the growing use and release of nanomaterials, their toxic impacts on aquatic ecosystems have drawn widespread attention in recent years. In this study, we exposed Microcystis aeruginosa to 5 mg/L titanium dioxide nanoparticles (nTiO₂) under different culture conditions (pH 6, 7, 8, 9; 20 °C, 25 °C, 30 °C). The results showed that algae had the worst growth status with lowest biomass, lowest photosynthetic activity and highest reactive oxygen species (ROS) generation under 5 mg/L nTiO₂ at pH 6 and 20 °C. Images by scanning electron microscopy (SEM) revealed that nTiO₂ hindered light absorption by algal cells by wrapping the algal surface, which led to obvious cell surface deformation at pH 6 or 20 °C. In addition, microcystin-LR (MC-LR) production increased as temperature or pH decreased when exposed to nTiO₂ at 5 mg/L, demonstrating that falling pH or temperature enhanced the adverse effects toward algal cells under nTiO₂ stress and the potential risk of algae to the environment.

Characterization of the nano-bio interaction between metallic oxide nanomaterials and freshwater microalgae using flow cytometry

Since nanomaterials (NMs) are particulate contaminants, their first contact with organisms is a physical encounter ruled by physic-chemical processes that can determinate the potential NMs accumulation, toxicity, and trophic transfer. Freshwater ecosystems often become a final depository for NMs, so they can get in contact with the biota, especially primary organisms as algae. There are almost none comparative studies of this interaction using various NMs in the same conditions. This work identifies, analyzes, and compares the algae-NMs interaction by flow cytometry after a short-term contact test in which three freshwater algae (Raphidocelis subcapitata, Desmodesmus subspicatus, and Chlorella vulgaris) interact individually with a set of twelve metallic oxide NMs. Dose-response profiles and differences in the algae-NMs interaction were found according to each algae species (C. vulgaris had the most affinity, starting the interaction from 0.5 mg/L and D. subspicatus had the less affinity starting at 5 mg/L). Flow cytometry results were confirmed by optical microscopy. Some NMs characteristics were identified as key-factors that govern the algae-NMs interaction: NMs composition (no interaction for SiO₂ NMs), surface electric charge (higher interaction for the positively charged NMs and lower interaction for the negatively charged ones) and crystalline form (for TiO₂ NMs). The presented method can be useful for a rapid determination of the interaction between free cells organisms as microalgae and (nano)particulate substances.

Effects of titanium dioxide nanoparticles on leaf cell structure and viability, and leaf elongation in the seagrass Halophila stipulacea

The ecotoxicity of titanium dioxide nanoparticles (TiO₂ NPs) is of increasing concern due to their extensive use in a variety of applications. This study aims to achieve a better understanding of TiO₂ NP ecotoxicity by assessing for the first time their effects on seagrasses. Changes in leaf cell structure and viability, and leaf elongation in Halophila stipulacea exposed under laboratory conditions to environmentally relevant TiO₂ NP concentrations (0.0015-1.5 mg L^-1) for 8 days were assessed. Actin filament (AF) disturbance firstly occurred in differentiating cells at 0.0015 mg L^-1 on the 8th day, while in meristematic cells at 0.15 mg L^-1 on the 6th day, both deteriorating concentration- and time-dependently. Endoplasmic reticulum (ER) appeared aggregated firstly at 0.015 mg L^-1 on the 8th day and earlier at the highest concentrations, while microtubules and cell ultrastructure appeared unaffected. Dead cells mainly occurred in older leaves; dead tooth, margin and intercostal epidermal cells exceeded 5% at 0.15-1.5 mg L^-1. A significant leaf elongation inhibition occurred at 0.015-1.5 mg L^-1 in older leaves and at 1.5 mg L^-1 in young apical leaves. AF, ER and leaf elongation impairment in H. stipulacea, being susceptible response parameters, could be used as early warning markers. A risk quotient >1 was calculated, indicating that TiO₂ NPs may pose a significant risk to the environment. The data presented underline the need for additional TiO₂ NP-seagrasses toxicity information, and could be utilized for the protection of the coastal environment.

Size-dependent oxidative stress effect of nano/micro-scaled polystyrene on Karenia mikimotoi

The effects of polystyrene (PS) of different sizes of diameter (65 nm, 100 nm and 1 μm) with different treat concentrations (control, 1 mg L^-1 and 10 mg L^-1) on growth and oxidative stress for K. mikimotoi were assessed across PS short-term exposures (3 d) and long-term exposures (13 d). The endpoints of physiological parameters such as cell density, antioxidant enzyme activity of SOD and CAT, the content of MDA and ROS level were monitored. The results showed that the CAT activity, SOD activity, MDA content and the relative ROS level reached to 377 U mgprot^-1, 164 U mgprot^-1, 157 nmol mgprot^-1 and 10.8% when treated with 10 mg L^-1 PS of 65 nm diameter; the CAT activity, SOD activity and MDA content in single K. mikimotoi reached to 0.46 U mgprot^-1, 0.36 U mgprot^-1 and 0.16 nmol mgprot^-1 under 10 mg L^-1 PS of 65 nm diameter on the third day. The relative ROS level in single K. mikimotoi was 71% under 10 mg L^-1 PS of 100 nm diameter on the 13th day. The works found that the size of nano/micro-PS was a key factor that cannot be ignored. Smaller size had more serious negative effects on the growth, oxidative stress and cell microstructure. The potential cytotoxicity mechanisms were that monodisperse nanoscaled PS crossed the biological barriers and the agglomerate nanoparticles caused physical blockage, while microscaled PS may not have such an equally strong negative effects. Visualized SEM images also proved that exposing to nano/micro-PS of varies diameters led to apparent size-dependent effects. The arms race of systematic oxidative defensive and offensive between K. mikimotoi and nano/micro-PS would have considerable value in deliberating the relationship between nano/microplastics and marine phytoplankton.

Impact of Titanium Dioxide Nanoparticles on Cd Phytotoxicity and Bioaccumulation in Rice (Oryza sativa L.)

The impact of engineered nanoparticles (ENPs) on the migration and toxicity of coexisting pollutants is still unclear, especially in soil media. This study aims to evaluate the impact of titanium dioxide nanoparticles (TiO₂ NPs) on the phytotoxicity of cadmium (Cd) to Oryza sativa L., and the migration of cadmium (Cd) in the soil-rice system. Three different Cd stress groups (C1 group: 1.0 mg kg⁻¹, C2 group: 2.5 mg kg⁻¹ and C3 group: 5.0 mg kg⁻¹) were set in the pot experiment, and the target concentration of TiO₂ NPs in each group were 0 mg kg⁻¹ (T0), 50 mg kg⁻¹ (T1), 100 mg kg⁻¹ (T2) and 500 mg kg⁻¹ (T3). Plant height and biomass decreased with the increasing of Cd content in paddy soil. TiO₂ NPs could lower the phytotoxicity of Cd in terms of the changes in the morphological and biochemical characteristics, especially in the tillering and booting stage. In the tillering stage, TiO₂ NPs addition caused a significant increase in plant height, biomass and the total chlorophyll content in the leaves of Oryza saliva L. In the booting stage, TiO₂ NPs addition caused a 15% to 32% and 24% to 48% reduction of malondialdehyde (MDA) content for the C2 and C3 group, respectively, compared to that of the respective control treatment (T0). TiO₂-NPs addition reduced the activity of peroxidase (POD) in the leaves in the booting and heading stage, and the activity of catalase (CAT) in the tillering stage. In the C1 and C2 group, the grain Cd content in the 100 and 500 mg kg⁻¹ TiO₂ NPs treatments reached 0.47–0.84 mg kg⁻¹, obviously higher than that of the treatment without TiO₂ NPs (0.27–0.32 mg kg⁻¹), suggesting that TiO₂-NPs could promote Cd migration in the soil-rice system.

Influence of polystyrene microplastics on the growth, photosynthetic efficiency and aggregation of freshwater microalgae Chlamydomonas reinhardtii

Microplastics are ubiquitous in aquatic ecosystems worldwide, but knowledge on their impacts on phytoplankton, especially freshwater microalgae, is still limited. To investigate this issue, microalgae Chlamydomonas reinhardtii was exposed to polystyrene (PS) microplastics with 4 concentration gradients (5, 25, 50 and 100 mg/L), and the growth, chlorophyll a fluorescence, photosynthetic activities (Fv/Fm), the contents of malondialdehydes (MDA), soluble proteins, extracellular polymeric substances (EPS) and settlement rate were accordingly measured. Results showed that the density of microalgae decreased as the increase of PS microplastics concentrations, and the highest inhibitory rate (IR) was 45.8% on the 7th day under the concentration of 100 mg/L. The high concentration (100 mg/L) of microplastics evidently inhibited the content of EPS released by microalgae into the solution. PS under all dosages tested could reduce both the chlorophyll a fluorescence yields and photosynthetic activities. The scanning electron microscope (SEM) images demonstrated that microplastic beads were wrapped on the surface of microalgae and damaged their membranes, which could suggest the reduction of photosynthetic activities and the increase of soluble proteins and MDA content. The results also showed that PS microplastics could inhibit the settlement of microalgae at the later stage, which also indicated the recovery of microalgae from the toxic environment. Our findings will contribute to understanding the effects of microplastics on freshwater microalgae, as well as evaluating the possible influences of microplastics on aquatic ecosystems.

Facilitated transport of nTiO2-kaolin aggregates by bacteria and phosphate in water-saturated quartz sand

The soil major component of clay plays an important role in governing the fate and transport of engineered nanomaterials (e.g., the most commonly used titanium dioxide nanoparticles; nTiO₂) in the subsurface environments via forming nTiO₂-clay aggregates. This research is designed to unravel the interplay of naturally-occurring bacteria (Escherichia coli) and phosphate on the transport and retention of nTiO₂-kaolin aggregates in water-saturated porous media. Our results showed that nTiO₂-nTiO₂ homoaggregates and nTiO₂-kaolin heteroaggregates dominated in the nTiO₂-kaolin nanoaggregate suspension. Transport of nTiO₂-kaolin aggregates was enhanced with the copresence of E. coli and phosphate, particularly at the low pH of 6.0. This effect is due to the greater adsorption of phosphate and thus the greater enhancement in repulsive interaction energies between aggregates and sand grains at pH 6.0 (vs. pH 9.0). The charged "soft layer" of E. coli cell surfaces changed the aggregation state and the heterogeneous distribution of nTiO₂-kaolin aggregates, and subsequently stabilized the nTiO₂-nTiO₂ homoaggregates and nTiO₂-kaolin heteroaggregates via TEM-EDX measurements and promoted the physical segregation between the aggregates (separation distance = 0.486 vs. 0.614 μm without vs. with the presence of E. coli) via 2D/3D AFM identifications, both of which caused greater mobility of nTiO₂-kaolin aggregates with the presence of E. coli. Nonetheless, transport of nTiO₂-kaolin aggregates was lower with the copresence of E. coli and phosphate vs. the singular presence of phosphate due to the competitive adsorption of less negatively charged E. coli (vs. phosphate) onto the aggregates. Taken altogether, our findings furnish new insights into better understanding the fate, transport, and potential risks of nTiO₂ in real environmental settings (soil and sediment aquifer) where clay, bacteria, and phosphate ubiquitously cooccur.

Effect of Metal Oxide Nanoparticles on the Chemical Speciation of Heavy Metals and Micronutrient Bioavailability in Paddy Soil

The effects of engineered nanoparticles (ENPs) on heavy metal fate and biotoxicity in farmland soil are mostly unknown. A flooding-drying simulation experiment was conducted to study the effects of three typical metal oxide nanoparticles (TiO₂-NPs, ZnO-NPs and CuO-NPs) on the chemical speciation of heavy metals and micronutrient bioavailability in paddy soil. The results showed that the addition of ZnO-NPs and CuO-NPs caused significant increases in soil pH, Eh and EC after a 90-d flooding-drying process. ZnO-NPs and CuO-NPs addition caused clearly increase in the Zn and Cu concentrations in the acid-soluble fraction, Fe/Mn oxides-bound fraction and organic-bound fraction, leading to higher bioavailability in the soil. DTPA-extractable Zn and Cu increased to 184.6 mg kg^-1 and 145.3 mg kg^-1 in the maximum ZnO-NPs and CuO-NPs concentration treatments (500 mg kg^-1). TiO₂-NPs promoted the transformation of Mn from a Fe/Mn oxides-bound fraction to an acid-soluble fraction. Soil Cd bioavailability obviously decreased in the TiO₂-NPs treatment but increased in the ZnO-NPs and CuO-NPs treatments.

Effects of Mixtures of Engineered Nanoparticles and Metallic Pollutants on Aquatic Organisms

In aquatic environment, engineered nanoparticles (ENPs) are present as complex mixtures with other pollutants, such as trace metals, which could result in synergism, additivity or antagonism of their combined effects. Despite the fact that the toxicity and environmental risk of the ENPs have received extensive attention in the recent years, the interactions of ENPs with other pollutants and the consequent effects on aquatic organisms represent an important challenge in (nano)ecotoxicology. The present review provides an overview of the state-of-the-art and critically discusses the existing knowledge on combined effects of mixtures of ENPs and metallic pollutants on aquatic organisms. The specific emphasis is on the adsorption of metallic pollutants on metal-containing ENPs, transformation and bioavailability of ENPs and metallic pollutants in mixtures. Antagonistic, additive and synergistic effects observed in aquatic organisms co-exposed to ENPs and metallic pollutants are discussed in the case of “particle-proof” and “particle-ingestive” organisms. This knowledge is important in developing efficient strategies for sound environmental impact assessment of mixture exposure in complex environments.

Enhanced microalgal growth and lipid accumulation by addition of different nanoparticles under xenon lamp illumination

In this study, the growth and lipid accumulation of Scenedesmus sp. using different nanoparticles and light sources were investigated. Xenon lamp can produce a broad illumination spectrum, and exhibited better performance than light-emitting diode. SiC and g-C₃N₄ nanoparticles improved the biomass and lipid accumulation, whereas TiO₂ and TiC nanoparticles had inhibitory influence on microalgae. Lipid production can be improved by oxidative stress produced by combination of nanoparticles and xenon lamp irradiation. At the optimal SiC nanoparticles concentration of 150 mg L^-1 and photoperiod of 6:18 h, the maximum biomass concentration and total lipid content reached 3.18 g L^-1 and 40.26%, respectively. The addition of SiC nanoparticles could promote the substrate utilization rate and induce stress condition, thereby enhancing the activity of acetyl-CoA carboxylase and lipid biosynthesis. This research shows that SiC nanoparticles addition combined with xenon lamp illumination is a promising strategy to promote microalgal growth and lipid accumulation.

TiO2 nanoparticles and multi-walled carbon nanotubes monitoring and bioremediation potential using ciliates Pseudocohnilembus persalinus

In recent years, the release of nanomaterials pollutants to water bodies, to a great extent, attributed to anthropogenic activities. Their impacts on aquatic organisms as well as nanomaterial monitoring and bioremediation using organism have drawn much attentions. However, studies on relationship of nano-contaminants and aquatic organisms are very scarce. Our results showed that titanium dioxide nanoparticles (TiO₂-NPs) and Multi-walled carbon nanotubes (MWCNTs) caused an obvious cell decreases on the whole, but a significant increase at 48 h TiO₂-NPs exposure, indicating a resistant mechanism in ciliates for nano-toxic. Besides, MWCNTs was more toxic to Pseudocohnilembus persalinus than that of TiO₂-NPs in terms of EC₅₀ value. It is firstly found that P. persalinus ingested and released TiO₂-NPs through cytostome and cytoproct, which might be the reason that TiO₂-NPs less toxic than MWCNTs. The significantly increased superoxide dismutase (SOD) and glutathione S-transferase (GST) enzyme activities and expression levels were evaluated by reactive oxygen species ROS generation, which demonstrated that P. persalinus antioxidant defense enzyme played roles on nano-toxic resistant in ciliates. Moreover, the integrated biomarker response (IBR) was also determined, which demonstrated that MWCNTs had comparatively higher values than those of TiO₂-NPs after higher concentration exposure to ciliates. In addition, it was confirmed by the present work that sod, gst and cat played different roles on immunity, and the sensitivity of cat gene expression to these two nanomaterials exposure was dissimilar. Damages of shrunk as well as losses of cilia on the cell surface caused by TiO₂-NPs and MWCNTs exposure in P. persalinus using SEM revealed possible physical hazards of aggregated nanomaterials. Our findings will be helpful to understand the effect mechanisms of NPs on ciliates, and also demonstrated the possibility of P. persalinus as bio-indicator of nanomaterials in aquatic and potentials on bioremediation.

Toxicity of ZnO/TiO2 -conjugated carbon-based nanohybrids on the coastal marine alga Thalassiosira pseudonana

Increasing consumption of metal-oxide nanoparticles (NPs) and carbon-based nanomaterials has caused significant concern about their potential hazards in aquatic environments. The release of NPs into aquatic environments could result in adsorption of NPs on microorganisms. While metal-oxide NP-conjugated carbon-based nanohybrids (NHs) may exhibit enhanced toxicity toward microorganisms due to their large surface area and the generation of reactive oxygen species (ROS), there is a lack of information regarding the ecotoxicological effects of NHs on marine diatom algae, which are an indicator of marine pollution. Moreover, there is scant information on toxicity mechanisms of NHs on aquatic organisms. In this study, four NHs (ie, ZnO-conjugated graphene oxide [GO], ZnO-conjugated carbon nanotubes [CNTs], TiO₂ -conjugated GO, and TiO₂ -conjugated CNT) that were synthesized by a hydrothermal method were investigated for their toxicity effects on a Thalassiosira pseudonana marine diatom. The in vitro cellular viability and ROS formation employed at the concentration ranges of 50 and 100 mg/L of NHs over 72 hours revealed that ZnO-GO had the most negative effect on T. pseudonana. The primary mechanism identified was the generation of ROS and GO-induced dispersion that caused electrostatic repulsion, preventing aggregation, and an increase in surface areas of NHs. In contrast to GO-induced dispersion, large aggregates were observed in ZnO/TiO₂ -conjugated CNT-based NHs. The scanning electron microscopy images suggest that NHs covered algae cells and interacted with them (shading effects); this reduced light availability for photosynthesis. Detailed in vitro toxicity effects and mechanisms that cause high adverse acute toxicity on T. pseudonana were unveiled; this implied concerns about potential hazards of these mechanisms in aquatic ecosystems.

Tetracycline affects the toxicity of P25 n-TiO2 towards marine microalgae Chlorella sp

Pollutants such as n-TiO₂ and tetracycline enter the marine environment through various sources starting from their production until disposal. Hence, it is vital to determine the interactive effect of one pollutant with the other when they coexist in the environment. In the present study, the effect of antibiotic - tetracycline (TC) on the toxicity of P25 n-TiO₂ was studied with marine microalgae, Chlorella sp. The impact of TC (1 mg L^-1) on five different concentrations of n-TiO₂ (0.25, 0.5, 1, 2 and 4 mg L^-1) under both visible and UV-A illuminations was evaluated. Effective diameter of n-TiO₂ in ASW at 0^th h increased from 690.69 ± 19.55 nm (0.25 mg L^-1) to 1183.04 ± 37.10 nm (0.25 mg L^-1 + 1 mg L^-1) and 971.51 ± 14.61 nm (4 mg L^-1) to 1324.12 ± 11.59 nm (4 mg L^-1 + 1 mg L^-1) in presence of TC. A significant increase in the toxicity of 4 mg L^-1 n-TiO₂ upon the addition of TC (68.16 ± 0.37% under visible and 80.21 ± 0.3% under UV-A condition) was observed. No significant difference in toxicity was observed between visible and UV-A illuminations. Further the toxicity data was corroborated through the measurement of oxidative stress and antioxidant enzyme activities. Independent action model showed antagonistic effect for lower concentrations of n-TiO₂ and additive effect for higher concentrations of n-TiO₂ when present in mixture with TC under both illuminations. For the higher mixture concentration of 4 mg L^-1 n-TiO₂ and 1 mg L^-1 TC, the percentage TC removal was about 55.29% and 30% and the corresponding TOC removal was found to be 54.29% and 31.04% under visible and UV-A illuminations respectively. The site of ROS generation in Chlorella sp. was identified with electron transfer chain inhibitors. Both mitochondria and chloroplast acted as the site for the ROS generation in Chlorella sp. The SEM images of the algal cells upon exposure to n-TiO₂ and mixture revealed the aggregation of cells and distortion of cell membrane.

Toxicity of cadmium selenide nanoparticles on the green microalgaChlorella vulgaris: inducing antioxidative defense response

Green algae are dominant primary producers in aquatic environments. Thus, assessing the influences of pollutants such as nanoparticles on the algae is of high ecological significance. In the current study, cadmium selenide nanoparticles (CdSe NPs) were synthesized using the hydrothermal method and their characteristics were determined by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FT-IR) techniques. Subsequently, the toxicity of synthesized nanoparticles on the green microalga Chlorella vulgaris was investigated. The observations by SEM confirmed that exposure to CdSe NPs had severe impacts on the algal morphology. Furthermore, the obtained results revealed the toxic effect of CdSe NPs by a decrease in the number of cells. Measurement of antioxidant enzymes activity showed an increase in the activity of catalase, and a decrease in the activity of superoxide dismutase (SOD) at high concentrations of CdSe NPs. The exposure of C. vulgaris to CdSe NPs resulted also in a change in algal pigments as well as total phenol content. Taken together, CdSe NPs appeared to have significant cytotoxic effects on C. vulgaris in the applied concentrations.

Stability of nickel oxide nanoparticles and its influence on toxicity to marine algae Chlorella vulgaris

This study considered the stability of nickel oxide nanoparticles (nNiO) in seawater including their ability of aggregation and ion release. Furthermore, the relationship between these properties and their toxicity on marine algae Chlorella vulgaris was investigated. The results showed nNiO inhibited the growth of algal cells and decreased their chlorophyll content, which was due to the shading effects by aggregation of nNiO in seawater. Moreover, the release of Ni²⁺ depended on concentration of the nNiO solution. About 1.63% Ni²⁺ (varied from 0.89 to 3.63%) was detected and it may mediate the generation of ROS under both visible light and ultraviolet (UV) irradiation, which resulted in oxidative stress in algae. Therefore, the stability of nNiO in water affected its toxicity, which should be considered when assessing the nano-pollution risks in aquatic ecosystem.

Diminishing bioavailability and toxicity of P25 TiO2 NPs during continuous exposure to marine algae Chlorella sp

Titanium dioxide nanoparticles (TiO₂ NPs) find applications in our day-to-day life because of unique physicochemical properties. Their release into the aquatic environment poses a possible risk to the organisms. However, the continuing exposure of NPs might reduce their bioavailability to marine organisms owing to aggregation and sedimentation in the aqueous systems thus significantly reducing their toxic impact. In this regard, the present study investigates the effect of continuous exposure of TiO₂ NPs to marine microalgae Chlorella sp. under UV-A irradiation through "tanks in series" mode of experiments. In a three-cycle experiment, concentration of TiO₂ NPs in the first cycle was fixed at 62.6 μM, and the interacted nanoparticles was subsequently exposed to fresh batches of algae in the next two cycles. After the interaction, the NPs underwent severe aggregation (mean hydrodynamic diameter 3000 ± 18.2 nm after cycle I) leading to gravitational settling in the medium and thus decreased bioavailability. The aggregation can be attributed to interactions between the particles themselves (homo-aggregation) further aggravated by the presence of the algal cells (hetero-aggregation). Cellular viability after cycle I was found to be only 24.2 ± 2.5%, and it was enhanced to 96.5 ± 2.8% after the cycle III in the course of continuous exposure. The results were validated with estimation of oxidative stress markers such as intracellular ROS (total ROS, superoxide and hydroxyl radicals) and LPO after each cycle of exposure. The continuing decrease in the EPS across the cycles further confirmed the diminishing toxicity of the NPs.

Antibacterial effects of graphene- and carbon-nanotube-based nanohybrids on Escherichia coli: Implications for treating multidrug-resistant bacteria

Some nanomaterials including Fe⁰, Ag⁰, and ZnO are well known for their antibacterial effects. However, very few studies have examined antibacterial effects of nanohybrids. Given that metal oxides, mainly ZnO and TiO₂, are known to increase mobility, surface area, and photocatalysis when combined with carbon-based nanomaterials, ZnO- and TiO₂-conjugated carbon nanotube and graphene oxide nanohybrids were investigated for their antibacterial effects on Escherichia coli (DH5α, a multidrug-resistant coliform bacterium). Graphene-oxide (GO)-based nanohybrids (ZnO-GO and TiO₂-GO) induced increased dispersion compared to carbon-nanotube (CNT)-based nanohybrids (ZnO-CNT and TiO₂-CNT). Among the four types of nanohybrids, ZnO-conjugated nanohybrids exhibited a higher antibacterial property, resulting in the antibacterial effect (measured with growth inhibition of cells) in the order ZnO-GO > ZnO-CNT > TiO₂-GO > TiO₂-CNT. Among four possible antibacterial mechanisms (generation of reactive oxygen species (ROS), physicochemical characteristics, the steric effect, and release of metal ions), a primary mechanism-ROS generation-was identified; whereas, physicochemical characteristics and the steric effect were part of contributing mechanisms. The increasing dispersion of TiO₂/ZnO on GO may have contributed to the antibacterial effects due to increasing surface areas. Similarly, significant damages to E. coli cell membranes were found by the GO sheet with its sharp edges. Our results suggest that applying GO-based ZnO or TiO₂ could be an effective antibacterial method, especially for the treatment of multidrug-resistant bacteria in the water.

Effects of titanium dioxide nanoparticles on Microcystis aeruginosa and microcystins production and release

Due to growing production and use, release of nanoparticles (NPs) into the aquatic environment may pose a hazard to ecosystem. In this study, Microcystis aeruginosa was exposed to different concentrations (0.1, 1, 10, 50, 100 mg/L) of titanium dioxide (TiO₂) NPs to assess their impact on algae. Meanwhile, the production and release of microcystins (MCs) was determined. Results showed that TiO₂ NPs significantly decreased the maximal photochemical efficiency of photosystem II, and thus inhibited the photosynthetic activity of M. aeruginosa. They also increased the content of reactive oxygen species (ROS) and malondialdehyde (MDA), indicating their oxidative damage on algae. Besides, TiO₂ NPs at high concentrations (50 and 100 mg/L) aggregated on the algal surface and block the light, herein inhibited algae growth (16.03%±2.50% and 54.13%±0.93%) but induced the production (25.02%±1.23% and 114.43%±2.96%) and release (20.96%±13.30% and 12.10%±8.80%) of MCs. These results indicated that high concentrations of TiO2 NPs increased MCs concentration in water system, which may be harmful to aquatic ecosystem.

Impact of ZnO nanoparticles on Cd toxicity and bioaccumulation in rice (Oryza sativa L.)

With the widespread use of metal oxide nanoparticles (MNPs), agricultural soil is gradually becoming a primary sink for MNPs. The effect of these nanoparticles on the fate and the toxicity of co-existing heavy metals is largely unknown. In this paper, pot experiments were conducted to evaluate the impact of ZnO nanoparticles (ZnO-NPs) on Cd toxicity and bioaccumulation in a soil-rice system. Different amounts of ZnO-NPs were added to three different levels of Cd-contaminated paddy soil (L-Cd, 1.0 mg kg^-1; M-Cd, 2.5 mg kg^-1; H-Cd, 5.0 mg kg^-1). The results showed that the addition of ZnO-NPs significantly increased the soil pH value, and the soil pH value increased with the increase in ZnO-NP concentration. Reductions in plant height and biomass under Cd stress were recovered and increased after the addition of ZnO-NPs; the addition of ZnO-NP promoted rice biomass increased by 13~22% and 25~43% in the M-Cd and H-Cd groups, respectively, compared with that of the respective control treatment. A high concentration of ZnO-NPs could increase the concentration of bioavailable Cd in rhizosphere soil. In the L-Cd group, the Cd concentration of the rice in the L-Z500 treatment increased to 0.51 mg kg^-1, exceeding the limit for acceptable Cd concentrations in rice of China (0.2 mg kg^-1). This work revealed that ZnO-NPs could improve plant growth, especially in the early-growth stage, and alleviate the toxic effects of Cd. However, the addition of high-concentration (500 mg kg^-1) ZnO-NPs in the lower Cd pollution soil could significantly facilitate the accumulation of Cd by Oryza sativa L.

Biotoxicity of water-soluble species in PM2.5 using Chlorella

China has been faced with severe haze pollution, which is hazardous to human health. Among the air pollutants, PM_2.5 (particles with an aerodynamic diameter ≤ 2.5 μm) is the most dangerous because of its toxicity and impact on human health and ecosystems. However, there has been limited research on PM_2.5 particle toxicity. In the present study, we collected daily PM_2.5 samples from January 1 to March 31, 2018 and selected samples to extract water-soluble species, including SO₄^2-, NO₃^-, WSOC, and NH₄⁺. These samples represented clean, good, slight, moderate, and heavy pollution days. After extraction using an ultrasonic method, PM_2.5 solutions were obtained. We used Chlorella as the test algae and studied the content of chlorophyll a, as well as the variation in fluorescence when they were placed into the PM_2.5 extraction solution, and their submicroscopic structure was analyzed using transmission electron microscopy (TEM). The results showed that when the air quality was relatively clean and good (PM_2.5 concentration ≤ 75 μg m^-3), the PM_2.5 extraction solutions had no inhibiting effects on Chlorella, whereas when the air quality was polluted (PM_2.5 concentration > 75 μg m^-3) and heavily polluted (PM_2.5 concentration > 150 μg m^-3), with increasing PM_2.5 concentrations and exposure time, the chlorophyll a content in Chlorella decreased. Moreover, the maximum photochemical quantum yield (F_v/F_m) of Chlorella obviously decreased, indicating chlorophyll inhibition during polluted days with increasing PM_2.5 concentrations. The effects on the chlorophyll fluorescence parameters were also obvious, leading to an increase of energy dissipated per unit reaction center (DI_o/RC), suggesting that Chlorella could survive when exposed to PM_2.5 solutions, whereas the physiological activities were significantly inhibited. The TEM analysis showed that there were few effects on Chlorella cell microstructure during clean days, whereas plasmolysis occurred during light- and medium-polluted days. With increasing pollution levels, plasmolysis became more and more apparent, until the organelles inside the cells were thoroughly destroyed and most of the parts could not be recognized.

Cytotoxic impacts of CuO nanoparticles on the marine microalga Nannochloropsis oculata

The toxic impacts of CuO nanoparticles (NPs) on the marine phytoplankton Nannochloropsis oculata were evaluated by measuring a number of biological parameters. Exposure to different concentrations of CuO-NPs (5-200 mg/L) significantly decreased the growth and content of chlorophyll a of N. oculata. The results showed that CuO-NPs were toxic to this microalga with a half maximal effective concentration (EC50) of 116.981 mg/L. Exposure to CuO-NPs increased the hydrogen peroxide (H₂O₂) content and induced the membrane damages. Moreover, the concentration of phenolic compounds was increased, while the levels of carotenoids were markedly decreased in comparison to the control sample. The activity of catalase (CAT), ascorbate peroxidase (APX), polyphenol oxidase (PPO) and lactate dehydrogenase (LDH) enzymes significantly was increased in response to CuO-NPs treatments. These results indicated that CuO-NPs stimulated the antioxidant defense system in N. oculata to protect the cells against the oxidative damages. The Fourier-transform infrared spectroscopy (FTIR) analyses showed that the main functional groups (C=O and C-O-C) interacted with CuO-NPs. The images of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed the cell membrane damage and the change of cell wall structure which may be contributed to the nanotoxicity. These findings may provide additional insights into the mechanisms of cytotoxicity induced by CuO-NPs.

Utilization of nanomaterials for in-situ remediation of heavy metal(loid) contaminated sediments: A review

Heavy metal(loid)s are toxic and non-biodegradable environmental pollutants. The contamination of sediments with heavy metal(loid)s has attracted increasing attention due to the negative environmental effects of heavy metal(loid)s and the development of new remediation techniques for metal(loid) contaminated sediments. As a result of rapid nanotechnology development, nanomaterials are also being increasingly utilized for the remediation of contaminated sediments due to their excellent capacity of immobilizing/adsorbing metal(loid) ions. This review summarizes recent studies that have used various nanomaterials such as nanoscale zero-valent iron (nZVI), stabilizer-modified nZVI, nano apatite based-materials including nano-hydroxyapatite particles (nHAp) and stabilized nano-chlorapatite (nCLAP), carbon nanotubes (CNTs), and titanium dioxide nanoparticles (TiO₂ NPs) for the remediation of heavy metal(loid) contaminated sediments. We also review the analysis of potential mechanisms involved in the interaction of nanomaterials with metal(loid) ions. Subsequently, we discuss the factors affecting the nanoparticle-heavy metal(loid)s interaction, the environmental impacts resulting from the application of nanomaterials, the knowledge gaps, and potential future research.

Nanoparticle TiO2 size and rutile content impact bioconcentration and biomagnification from algae to daphnia

Little information is available about effect of particle size and crystal structure of nTiO₂ on their trophic transfer. In this study, 5 nm anatase, 10 nm anatase, 100 nm anatase, 20 nm P25 (80% anatase and 20% rutile), and 25 nm rutile nTiO₂ were selected to investigate the effects of size and crystal structure on the toxicity, bioconcentration, and trophic transfer of nTiO₂ to algae and daphnia. In the exposed daphnids, metabolic pathways affected by nTiO₂ and nTiO₂-exposed algae (nTiO₂-algae) were also explored. The 96 h IC₅₀ values of algae and the 48 h LC₅₀ values of daphnia were 10.3, 18.9, 43.9, 33.6, 65.4 mg/L and 10.5, 13.2, 37.0, 28.4, 60.7 mg/L, respectively, after exposed to nTiO₂-5A, nTiO₂-10A, nTiO₂-100A, nTiO₂-P25, and nTiO₂-25R, respectively. The bioconcentration factors (BCFs) for 0.1, 1, and 10 mg/L nTiO₂ in daphnia ranged from 21,220 L/kg to 145,350 L/kg. The nTiO₂ biomagnification factors (BMFs) of daphnia fed with 1 and 10 mg/L nTiO₂-exposed algae were consistently greater than 1.0 (5.7-122). The results show that the acute toxicity, BCF, and BMF all decreased with increasing size or rutile content of nTiO₂. All types of nTiO₂ were largely accumulated in the daphnia gut and were not completely depurated within 24 h. At the molecular level, 22 Kyoto Encyclopedia of Genes and Genomes (KEGG) metabolic pathways of daphnia were impacted by the nTiO₂ and nTiO₂-algae treatments, including glutathione metabolism, aminoacyl-tRNA biosynthesis, among others. Six and four KEGG metabolic pathways were significantly disturbed in daphnids exposed to nTiO₂ and nTiO₂-algae, respectively, indicating the presence of algae partially alleviated the negative impact of nTiO₂ on metabolism. These findings increase understanding of the impacts of physicochemical properties of nTiO₂ on the food chain from molecular scale to that of the whole organism, and provide new insight into the ecological effect of nanomaterials.

The interactions between micro polyvinyl chloride (mPVC) and marine dinoflagellate Karenia mikimotoi: The inhibition of growth, chlorophyll and photosynthetic efficiency

Microplastics pose a great threat to entire marine ecosystems, but little is known about their impacts on phytoplankton, especially for the harmful dinoflagellates. In this study, effects of micro polyvinyl chloride (mPVC) on the growth, chlorophyll content and photosynthetic efficiency of the dinoflagellate Karenia mikimotoi at different periods (0, 24, 48, 72 and 96 h) were assessed using gradient concentrations (0, 5, 25, 50 and 100 mg L^-1) of mPVC with a size of 1 μm. PVC microplastics had dose-dependent adverse effects on K. mikimotoi growth, chlorophyll content and photosynthetic efficiency. The density of algal cell decreased with increasing mPVC concentrations and the highest inhibitory rate (IR) was 45.8% at 24 h under 100 mg L^-1 of mPVC. The total chlorophyll content and chlorophyll content in a single algal cell decreased at 96 h and the ФPSⅡ and Fv/Fm decreased 25.3% and 17.1%, respectively. The SEM images provided an intuitive visual method to observe the behaviors and interactions between microplastics and microalgae. It was found from the SEM images that microalgae was wrapped by microplastic beads. The physical blockage and aggregation were also responsible for the cytotoxicity of K. mikimotoi. Our study clarified that PVC microplastics can reduce algal growth, chlorophyll content and photosynthetic efficiency, and it is beneficial to evaluate the possible impact of plastics on aquatic ecosystems.

Recovery of Alexandrium tamarense under chronic exposure of TiO2 nanoparticles and possible mechanisms

Harmful algal blooms (HAB), heavily influenced by human activities, pose serious hazard to aquatic ecology and human health. In this study, we monitored the physiological responses and paralytic shellfish poisoning toxins (PSTs) of the toxin-producing HAB species Alexandrium tamarense under titanium dioxide nanoparticles (_nTiO₂) exposure in the concentration range of 2-320 mg L^-1 over a period of 13 days. The results showed the acute inhibition of _nTiO₂ on the algal growth, photosynthetic efficiency and esterase activity at all concentrations except 2 mg L^-1. Nonetheless, they recovered after 13 days _nTiO₂ exposure from 20 to 80 mg L^-1. The EC₅₀ value increased from 85.1 mg L^-1 in Day 4 to 140.9 mg L^-1 in Day 13. The physiological recovery after prolonged exposure may result from the elimination of excess reactive oxygen species (ROS), a combined outcome of increased _nTiO₂ aggregation and algal antioxidant defense mechanisms. This observation is supported by the immediately increased antioxidant enzyme activities, including the superoxide dismutase (SOD) and catalase (CAT) activities upon _nTiO₂ exposure. Moreover, the production of PSTs in A. tamarense significantly increased by 1.41-1.76 folds after chronic _nTiO₂ exposure at all tested concentrations (p < 0.05), which might also be an adaptive response for the microalgae to overcome the stresses. In particular, the proportions of highly-toxic PSTs analogues GTX2/3, STX and dcSTX were significantly increased upon _nTiO₂ exposure (p < 0.05). Hence, the chronic _nTiO₂ exposure might aggravate the ecological impact of HABs. Furthermore investigations on different HAB species, especially those toxin-producing ones, and detail physiological responses are obviously needed.

Influence of differently functionalized polystyrene microplastics on the toxic effects of P25 TiO2 NPs towards marine algae Chlorella sp

Increased utilization of titanium dioxide nanoparticles (TiO₂ NPs) for commercial as well as industrial purposes resulted in the accumulation of nanoparticles in the marine system. Microplastics being an emerging secondary pollutant in the marine ecosystem have an impact on the toxic effects of TiO₂ NPs which has not been evaluated up to date. So it is important to assess the toxic effects of both these pollutants on the marine environment. The present study examines the impact of differently functionalized microplastics on the toxic effects of P25 TiO₂ NPs to marine algae Chlorella sp. The tendency of nanoparticles to undergo aggregation in artificial seawater was observed with increase in time. The median effective concentration for TiO₂ NPs was found to be 81 μM which indicates higher toxic effects of NPs toward algae. In contrast, microplastics irrespective of their difference in functionalization had minimal toxic effect of about 15% at their higher concentration tested, 1000 mg L^-1. Plain and aminated polystyrene microplastics enhanced the TiO₂ NPs toxicity which was further validated with oxidative stress determination studies like reactive oxygen species and lipid peroxidation assays. Negatively charged carboxylated polystyrene microplastics decreased the TiO₂ NPs toxicity with possible hetero-aggregation between TiO₂ NPs and microplastics in the system. The toxicity data obtained for the mixture was further corroborated with Abbott's mathematical model.

Toxicity and mechanisms of action of titanium dioxide nanoparticles in living organisms

Titanium dioxide nanoparticles (TiO₂ NPs) are one of the most widely used nanomaterials in the consumer products, agriculture, and energy sectors. Their large demand and widespread applications will inevitably cause damage to organisms and ecosystems. A better understanding of TiO₂ NP toxicity in living organisms may promote risk assessment and safe use practices of these nanomaterials. This review summarizes the toxic effects of TiO₂ NPs on multiple taxa of microorganisms, algae, plants, invertebrates, and vertebrates. The mechanism of TiO₂ NP toxicity to organisms can be outlined in three aspects: The Reactive Oxygen Species (ROS) produced by TiO₂ NPs following the induction of electron-hole pairs; cell wall damage and lipid peroxidation of the cell membrane caused by NP-cell attachment by electrostatic force owing to the large surface area of TiO₂ NPs; and TiO₂ NP attachment to intracellular organelles and biological macromolecules following damage to the cell membranes.