Extracellular matrix scaffolds for cartilage and bone regeneration

A high-throughput biomimetic bone-on-a-chip platform with artificial intelligence-assisted image analysis for osteoporosis drug testing

Although numerous organ-on-a-chips have been developed, bone-on-a-chip platforms have rarely been reported because of the high complexity of the bone microenvironment. With an increase in the elderly population, a high-risk group for bone-related diseases such as osteoporosis, it is essential to develop a precise bone-mimicking model for efficient drug screening and accurate evaluation in preclinical studies. Here, we developed a high-throughput biomimetic bone-on-a-chip platform combined with an artificial intelligence (AI)-based image analysis system. To recapitulate the key aspects of natural bone microenvironment, mouse osteocytes (IDG-SW3) and osteoblasts (MC3T3-E1) were cocultured within the osteoblast-derived decellularized extracellular matrix (OB-dECM) built in a well plate-based three-dimensional gel unit. This platform spatiotemporally and configurationally mimics the characteristics of the structural bone unit, known as the osteon. Combinations of native and bioactive ingredients obtained from the OB-dECM and coculture of two types of bone cells synergistically enhanced osteogenic functions such as osteocyte differentiation and osteoblast maturation. This platform provides a uniform and transparent imaging window that facilitates the observation of cell-cell interactions and features high-throughput bone units in a well plate that is compatible with a high-content screening system, enabling fast and easy drug tests. The drug efficacy of anti-SOST antibody, which is a newly developed osteoporosis drug for bone formation, was tested via β-catenin translocation analysis, and the performance of the platform was evaluated using AI-based deep learning analysis. This platform could be a cutting-edge translational tool for bone-related diseases and an efficient alternative to bone models for the development of promising drugs.

hAMSC Sheet Promotes Repair of Rabbit Osteochondral Defects

Osteochondral lesion is clinically common disease, which has been recognized as one of the contributing factors of significant morbidity. Although current treatments have achieved good outcomes, some undesirable complications and failures are not uncommon. Cell sheet technology (CST), an innovative technology to harvest seed cells and preserve abundant ECM, has been widely used in various tissue regeneration. For osteochondral lesion, many studies focus on using CST to repair osteochondral lesion and have achieved good outcomes. In the previous study, we have demonstrated that hAMSC sheet had a positive effect on osteochondral lesion. Therefore, this study is aimed at comparing the effect of noninduced hAMSC sheet with chondrogenically induced hAMSC sheet on osteochondral lesion and cartilage regeneration.

GREM1 suppresses hypertrophy of engineered cartilage in vitro but not bone formation in vivo

Current repair of articular cartilage (AC) often leads to a lower quality tissue with an unstable hypertrophic phenotype, susceptible to endochondral ossification and development of osteoarthritis. Engineering phenotypically stable AC remains a significant challenge in the cartilage engineering field. This motivates new strategies inspired from the extracellular matrix (ECM) proteins unique to phenotypically stable AC. We have previously shown that BMP antagonist gremlin-1 (GREM1) protein, present in permanent but not transient cartilage, suppresses the hypertrophy of chondrogenically primed bone marrow stem cells (BMSCs) in pellet culture. The goal of this study was to assess the effect of GREM1 on the in vitro and in vivo phenotypic stability of porcine BMSC derived cartilage engineered within chondro-permissive scaffolds. In addition, we explored whether GREM1 would synergise with physioxia, a potent chondrogenesis regulator, when engineering cartilage grafts. GREM1 did not influence the expression of chondrogenic markers (SOX-9, COL2A1), but did suppress the expression of hypertrophic markers (MMP13, COL10A1) in vitro. Cartilage engineered with GREM1 contained higher levels of residual cartilage after 4 weeks in vivo, but endochondral bone formation was not prevented. Higher GREM1 levels did not significantly alter the fate of engineered tissues in vitro or in vivo. The combination of physioxia and GREM1 resulted in higher sGAG deposition in vitro and greater retention of cartilage matrix in vivo than physioxia alone, but again did not suppress endochondral ossification. Therefore, while physioxia and GREM1 regulate BMSCs chondrogenesis in vitro and reduce cartilage loss in vivo, their use does not guarantee the development of stable cartilage.

Optical coherence tomography evaluation of the spatiotemporal effects of 3D bone marrow stromal cell culture using a bioreactor

Performing cell culture in a three-dimensional (3D) environment has various advantages. In cartilage tissue engineering, 3D in vitro cultures utilizing biomaterials and bioreactors can mimic the biological environment. However, the biggest drawback of these 3D culture systems is a limited ability to evaluate 3D cell distribution. Optical coherence tomography (OCT) has recently been used to evaluate 3D cellular morphology and structure in a timely manner. Here, we showed that OCT could be used to visually assess the distribution and the morphology of bone marrow stromal cells under chondrogenic 3D cultivation using alginate gels and rotary culture. In particular, OCT was able to visualize living cells embedded in alginate gels in a non-destructive and 3D manner, as well as quantitatively evaluate cell distribution and spheroid volume. We also found that cells were centralized in rotary culture but peripherally distributed in static culture, while rotary culture enhanced the hypertrophy of marrow stromal cells (MSCs) embedded in alginate gels. Together, our findings demonstrate that OCT can be used to evaluate the spatiotemporal effects of 3D cultivation using alginate gels and rotary culture. Therefore, this method may allow the observation of pre-cultured tissue over time and the optimization of culture conditions for regenerative tissue engineering.

Engineering Hydrogels for the Development of Three-Dimensional In Vitro Models

The superiority of in vitro 3D cultures over conventional 2D cell cultures is well recognized by the scientific community for its relevance in mimicking the native tissue architecture and functionality. The recent paradigm shift in the field of tissue engineering toward the development of 3D in vitro models can be realized with its myriad of applications, including drug screening, developing alternative diagnostics, and regenerative medicine. Hydrogels are considered the most suitable biomaterial for developing an in vitro model owing to their similarity in features to the extracellular microenvironment of native tissue. In this review article, recent progress in the use of hydrogel-based biomaterial for the development of 3D in vitro biomimetic tissue models is highlighted. Discussions of hydrogel sources and the latest hybrid system with different combinations of biopolymers are also presented. The hydrogel crosslinking mechanism and design consideration are summarized, followed by different types of available hydrogel module systems along with recent microfabrication technologies. We also present the latest developments in engineering hydrogel-based 3D in vitro models targeting specific tissues. Finally, we discuss the challenges surrounding current in vitro platforms and 3D models in the light of future perspectives for an improved biomimetic in vitro organ system.

Decellularized Alstroemeria flower stem modified with chitosan for tissue engineering purposes: A cellulose/chitosan scaffold

Utilizing plant-based scaffolds has pulled in the consideration of tissue engineers. Plant tissues own different structures with particular porosity and structure. In this study, the stem of the Alstroemeria flower was designated for decellularization to fabricate a new scaffold. The stems were decellularized and called AFSP and then modified by chitosan and named AFSPC. Osteoblast precursor cell line was employed to assess the biological potential of the final scaffolds. The results uncovered that AFSP owns linear microchannels with a smooth surface. AFSPC delineated uniform chitosan coating on the walls with appropriate roughness. AFSPC showed higher potential in swelling, degradation, diffusion, and having a porous structure than AFSP. Modification with chitosan improved mechanical behavior. Biological assays depicted no cytotoxicity for AFSP and AFSPC. AFSPC showed good cell attachment, proliferation, and migration. In conclusion, modified tissue plants can be a good candidate for tissue engineering of both soft and hard tissues.

Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics

Polymeric hydrogels are fascinating platforms as 3D scaffolds for tissue repair and delivery systems of therapeutic molecules and cells. Among others, methacrylated gelatin (GelMA) has become a representative hydrogel formulation, finding various biomedical applications. Recent efforts on GelMA-based hydrogels have been devoted to combining them with bioactive and functional nanomaterials, aiming to provide enhanced physicochemical and biological properties to GelMA. The benefits of this approach are multiple: i) reinforcing mechanical properties, ii) modulating viscoelastic property to allow 3D printability of bio-inks, iii) rendering electrical/magnetic property to produce electro-/magneto-active hydrogels for the repair of specific tissues (e.g., muscle, nerve), iv) providing stimuli-responsiveness to actively deliver therapeutic molecules, and v) endowing therapeutic capacity in tissue repair process (e.g., antioxidant effects). The nanomaterial-combined GelMA systems have shown significantly enhanced and extraordinary behaviors in various tissues (bone, skin, cardiac, and nerve) that are rarely observable with GelMA. Here we systematically review these recent efforts in nanomaterials-combined GelMA hydrogels that are considered as next-generation multifunctional platforms for tissue therapeutics. The approaches used in GelMA can also apply to other existing polymeric hydrogel systems.

Treatment of Temporomandibular Joint Heterotopic Ossificans: A Novel Protocol With Multimodal Therapy Based on Literature Review and Presentation of a Unique Case Reportc

PURPOSE

The purpose of this study was to create a treatment protocol for cases of heterotopic ossification (HO) of the temporomandibular joint (TMJ), particularly those refractory to current TMJ HO protocols. In addition, we demonstrate the success of this protocol on a unique case of recurrent HO that failed multiple TMJ HO protocols in the setting of an improvised explosive device (IED) blast in a wounded warrior.

METHODS

An electronic literature review was conducted via PubMed and Web of Science. Twenty-five studies were identified to provide supporting evidence for a proposed, up-to-date protocol for the treatment of refractory TMJ HO. The authors present a case report of a wounded warrior with HO ankylosis of bilateral TMJs in the setting of IED blast and demonstrate successful use of our surgical and pharmacotherapeutic protocol.

RESULTS

Based on the literature review, our proposed protocol consists of pharmacotherapy with celecoxib and etidronate, with weekly forced dilation (brisement) and home physical therapy with the TheraBite Jaw Motion Rehab System. Surgically, the TMJ should be treated with two-stage reconstruction using initial polymethyl methacrylate spacers and subsequent total joint reconstruction with custom prostheses, fat grafting, and 3-dimensional-navigated total resection of HO. This protocol was successfully utilized in our patient's refractory HO ankylosed TMJ secondary to IED blast, and the patient's maximal incisal opening was regained and has remained stable 2 years after surgery without recurrent HO.

CONCLUSIONS

Our method for treatment in this case deviated from the standard TMJ Concepts HO protocol in that it included multimodal pharmacotherapy with celecoxib and etidronate. Based on our literature review and experience, we advise that clinicians utilize our protocol for the management of all craniofacial HO cases, particularly in cases of recurrent HO that fail conventional therapies and/or involving high-order blast trauma.

Development and Characterization of Acellular Caprine Choncal Cartilage Matrix for Tissue Engineering Applications

Because of poor regenerative capabilities of cartilage, reconstruction of similar rigidity and flexibility is difficult, challenging, and restricted. The aim of the present investigation was to develop cost-effective acellular xenogeneic biomaterial as cartilage substitution. Two novel biometrics have been developed using different chemical processes (Na-deoxycholate + SDS and GndHCl + NaOH) to decellularize caprine (goat) ear cartilage and further extensively characterized before preclinical investigation. Complete cell removal was ascertained by hematoxylin and eosin staining followed by DNA estimation. No adverse effect on extracellular matrix (ECM) was found by quantifying collagen and sulfated glycosaminoglycans (sGAG) content as well as collagen, sGAG and elastin staining. Results showed no drastic changes in ECM structure apart from desired sGAG loss. Scanning electron microscopy images confirmed cellular loss and unaltered orientation. Nano-indentation study on cartilage matrices indicated interesting output showing better results among decellularized groups. Increased elastic modulus and hardness indicated better stiffness and more active energy dissipation mechanism due to decellularization. Fluid uptake and retention property remained unchanged after decellularization as analyzed by swelling behavior study. Additionally, acellular materials were confirmed to be nonreactive and nonhemolytic as assessed by in vitro hemocompatibility study. In vivo study (up to 3 months) on rabbits showed no symptoms of graft rejection/ tissue necrosis, established through postoperative histology and biochemical analyses of tissue explants. With regard to size, shape, biomechanics, source of origin and nonimmunogenic properties, these developed materials can play versatile role in biomedical/ clinical applications and pave a new insight as alternatives in cartilage reconstruction.

Osteochondral Lesions of the Talus: A Review on Talus Osteochondral Injuries, Including Osteochondritis Dissecans

This is a review on talus osteochondritis dissecans and talus osteochondral lesions. A majority of the osteochondral lesions are associated with trauma while the cause of pure osteochondritis dissecans is still much discussed with a possible cause being repetitive microtraumas associated with vascular disturbances causing subchondral bone necrosis and disability. Symptomatic nondisplaced osteochondral lesions can often be treated conservatively in children and adolescents while such treatment is less successful in adults. Surgical treatment is indicated when there is an unstable cartilage fragment. There are a large number of different operative technique options with no number one technique to be recommended. Most techniques have been presented in level II to IV studies with a low number of patients with short follow ups and few randomized comparisons exist. The actual situation in treating osteochondral lesions in the ankle is presented and discussed.

Articular cartilage and osteochondral tissue engineering techniques: Recent advances and challenges

In spite of the considerable achievements in the field of regenerative medicine in the past several decades, osteochondral defect regeneration remains a challenging issue among diseases in the musculoskeletal system because of the spatial complexity of osteochondral units in composition, structure and functions. In order to repair the hierarchical tissue involving different layers of articular cartilage, cartilage-bone interface and subchondral bone, traditional clinical treatments including palliative and reparative methods have showed certain improvement in pain relief and defect filling. It is the development of tissue engineering that has provided more promising results in regenerating neo-tissues with comparable compositional, structural and functional characteristics to the native osteochondral tissues. Here in this review, some basic knowledge of the osteochondral units including the anatomical structure and composition, the defect classification and clinical treatments will be first introduced. Then we will highlight the recent progress in osteochondral tissue engineering from perspectives of scaffold design, cell encapsulation and signaling factor incorporation including bioreactor application. Clinical products for osteochondral defect repair will be analyzed and summarized later. Moreover, we will discuss the current obstacles and future directions to regenerate the damaged osteochondral tissues.

Construction of tissue-customized hydrogels from cross-linkable materials for effective tissue regeneration

Hydrogels are prevalent scaffolds for tissue regeneration because of their hierarchical architectures along with outstanding biocompatibility and unique rheological and mechanical properties. For decades, researchers have found that many materials (natural, synthetic, or hybrid) can form hydrogels using different cross-linking strategies. Traditional strategies for fabricating hydrogels include physical, chemical, and enzymatical cross-linking methods. However, due to the diverse characteristics of different tissues/organs to be regenerated, tissue-customized hydrogels need to be developed through precisely controlled processes, making the manufacture of hydrogels reliant on novel cross-linking strategies. Thus, hybrid cross-linkable materials are proposed to tackle this challenge through hybrid cross-linking strategies. Here, different cross-linkable materials and their associated cross-linking strategies are summarized. From the perspective of the major characteristics of the target tissues/organs, we critically analyze how different cross-linking strategies are tailored to fit the regeneration of such tissues and organs. To further advance this field, more appropriate cross-linkable materials and cross-linking strategies should be investigated. In addition, some innovative technologies, such as 3D bioprinting, the internet of medical things (IoMT), and artificial intelligence (AI), are also proposed to improve the development of hydrogels for more efficient tissue regeneration.

Study on the poroelastic behaviors of the defected articular cartilage

This article presented the possible mechanism of arthritis damaged changes in cartilage's interstitial fluid flowing behavior. Firstly, the analytical solutions for the pore fluid pressure and velocity in the idealized cartilage defect model were obtained, which are employed to validate the finite element (FE) method. Then according to the MRI data, an articular cartilage FE model was developed to study the effects of defect characteristics on its poroelastic behaviors. The results showed the interstitial fluid pressure and velocity in defected articular cartilage is diminished, moreover, this trend is even more severe as the defect radius or thickness increased. As the development of osteoarthritis goes, the fluid velocity is decreased and cause the even serious nutrients loss.

Implantation of stem cells on synthetic or biological scaffolds: an overview of bone regeneration

Humans are exposed to a wide range of bone tissue injuries. In severe cases, bone damages could be only treated with transplantation of autologous or allogeneic grafting.In recent years, tissue engineering has become a promising strategy for repairing damaged organs and tissues, providing a great opportunity to cure several diseases. Bone tissue engineering consists of three components: scaffold, cells, and growth factors. Current bone tissue engineering strategies combine the use of stem cells with biologically active materials and gene therapy to mimic the natural microenvironment of bone. The combination of the scaffold with growth factors and extracellular matrix protein molecules can promote cell attachment, proliferation, and induce osteogenesis, which could provide signals for cell migration to begin the healing process during repair and bone formation.This article reviews the principles of bone regeneration and the most current developments of bone tissue engineering related to bone growth factors, the biologically active materials, such as bacterial cellulose, and stem cells.

The effect of cartilage decellularized extracellular matrix-chitosan compound on treating knee osteoarthritis in rats

Knee osteoarthritis (KOA) refers to a common disease in orthopaedics, whereas effective treatments have been rarely developed. As indicated from existing studies, chondrocyte death, extracellular matrix degradation and subchondral bone injury are recognized as the pathological basis of KOA. The present study aimed to determine the therapeutic effect of decellularized extracellular matrix-chitosan (dECM-CS) compound on KOA. In this study, rat knee cartilage was decellularized, and a satisfactory decellularized extracellular matrix was developed. As suggested from the in vitro experiments, the rat chondrocytes co-cultured with allogeneic dECM grew effectively. According to the results of the alamar blue detection, dECM did not adversely affect the viability of rat chondrocytes, and dECM could up-regulate the genes related to the cartilage synthesis and metabolism. As reported from the animal experiments, dECM-CS compound could protect cartilage, alleviate knee joint pain in rats, significantly delay the progress of KOA in rats, and achieve high drug safety. In brief, dECM-CS compound shows a good therapeutic effect on KOA.

The Importance of Interfaces in Multi-Material Biofabricated Tissue Structures

Biofabrication exploits additive manufacturing techniques for creating 3D structures with a precise geometry that aim to mimic a physiological cellular environment and to develop the growth of native tissues. The most recent approaches of 3D biofabrication integrate multiple technologies into a single biofabrication platform combining different materials within different length scales to achieve improved construct functionality. However, the importance of interfaces between the different material phases, has not been adequately explored. This is known to determine material's interaction and ultimately mechanical and biological performance of biofabricated parts. In this review, this gap is bridged by critically examining the interface between different material phases in (bio)fabricated structures, with a particular focus on how interfacial interactions can compromise or define the mechanical (and biological) properties of the engineered structures. It is believed that the importance of interfacial properties between the different constituents of a composite material, deserves particular attention in its role in modulating the final characteristics of 3D tissue-like structures.

Enhanced cellular migration and prolonged chondrogenic differentiation in decellularized cartilage scaffolds under dynamic culture conditions

Lesions of aural, nasal and tracheal cartilage are frequently reconstructed by complex surgeries which are based on harvesting autologous cartilage from other locations such as the rib. Cartilage tissue engineering (CTE) is regarded as a promising alternative to attain vital cartilage. Nevertheless, CTE with nearly natural properties poses a significant challenge to research due to the complex reciprocal interactions between cells and extracellular matrix which have to be imitated and which are still not fully understood. Thus, we used a custom-made glass bioreactor to enhance cell migration into decellularized porcine cartilage scaffolds (DECM) and mimic physiological conditions. The DECM seeded with human nasal chondrocytes (HPCH) were cultured in the glass reactor for 6 weeks and examined by histological and immunohistochemical staining, biochemical analyses and real time-PCR at 14, 28 and 42 days. The migration depth and the number of migrated cells were quantified by computational analysis. Compared to the static cultivation, the dynamic culture (DC) fostered migration of HPCH into deeper tissue layers. Furthermore, cultivation in the bioreactor enhanced differentiation of the cells during the first 14 days, but differentiation diminished in the course of further cultivation. We consider the DC in the presented bioreactor as a promising tool to facilitate CTE and to help to better understand the complex physiological processes during cartilage regeneration. Maintaining differentiation of chondrocytes and improving cellular migration by further optimizing culture conditions is an important prerequisite for future clinical application.

Ex Vivo and In Vivo Properties of an Injectable Hydrogel Derived From Acellular Ear Cartilage Extracellular Matrix

Extracellular matrix (ECM) hydrogels provide advantages such as injectability, the ability to fill an irregularly shaped space, and the adequate bioactivity of native matrix. In this study, we developed decellularized cartilage ECM (dcECM) hydrogels from porcine ears innovatively via the main method of enzymatic digestion and verified good biocompatible properties of dcECM hydrogels to deliver chondrocytes and form subcutaneous cartilage in vivo. The scanning electron microscopy and turbidimetric gelation kinetics were used to characterize the material properties and gelation kinetics of the dcECM hydrogels. Then we evaluated the biocompatibility of hydrogels via the culture of chondrocytes in vitro. To further explore the dcECM hydrogels in vivo, grafts made from the mixture of dcECM hydrogels and chondrocytes were injected subcutaneously in nude mice for the gross and histological analysis. The structural and gelation kinetics of the dcECM hydrogels altered according to the variation in the ECM concentrations. The 10 mg/ml dcECM hydrogels could support the adhesion and proliferation of chondrocytes in vitro. In vivo, at 4 weeks after transplantation, cartilage-like tissues were detected in all groups with positive staining of toluidine blue, Safranin O, and collagen II, indicating the good gelation of dcECM hydrogels. While with the increasing concentration, the tissue engineering cartilages formed by 10 mg/ml dcECM hydrogel grafts were superior in weights, volumes, collagen, and glycosaminoglycan (GAG) content compared to the dcECM hydrogels of 1 mg/ml and 5 mg/ml. At 8 weeks after grafting, dcECM hydrogel grafts at 10 mg/ml showed very similar qualities to the control, collagen I grafts. After 12 weeks of in vivo culture, the histological analysis indicated that 10 mg/ml dcECM hydrogel grafts were similar to the normal cartilage from pig ears, which was the source tissue. In conclusion, dcECM hydrogel showed the promising potential as a tissue engineering biomaterial to improve the regeneration and heal injuries of ear cartilage.

The vascular niche in next generation microphysiological systems

In recent years, microphysiological system (MPS, also known as, organ-on-a-chip or tissue chip) platforms have emerged with great promise to improve the predictive capacity of preclinical modeling thereby reducing the high attrition rates when drugs move into trials. While their designs can vary quite significantly, in general MPS are bioengineered in vitro microenvironments that recapitulate key functional units of human organs, and that have broad applications in human physiology, pathophysiology, and clinical pharmacology. A critical next step in the evolution of MPS devices is the widespread incorporation of functional vasculature within tissues. The vasculature itself is a major organ that carries nutrients, immune cells, signaling molecules and therapeutics to all other organs. It also plays critical roles in inducing and maintaining tissue identity through expression of angiocrine factors, and in providing tissue-specific milieus (i.e., the vascular niche) that can support the survival and function of stem cells. Thus, organs are patterned, maintained and supported by the vasculature, which in turn receives signals that drive tissue specific gene expression. In this review, we will discuss published vascularized MPS platforms and present considerations for next-generation devices looking to incorporate this critical constituent. Finally, we will highlight the organ-patterning processes governed by the vasculature, and how the incorporation of a vascular niche within MPS platforms will establish a unique opportunity to study stem cell development.

The use of a novel deer antler decellularized cartilage-derived matrix scaffold for repair of osteochondral defects

Background

The physiologic regenerative capacity of cartilage is severely limited. Current studies on the repair of osteochondral defects (OCDs) have mainly focused on the regeneration of cartilage tissues. The antler cartilage is a unique regenerative cartilage that has the potential for cartilage repair.

Methods

Antler decellularized cartilage-derived matrix scaffolds (adCDMs) were prepared by combining freezing-thawing and enzymatic degradation. Their DNA, glycosaminoglycans (GAGs), and collagen content were then detected. Biosafety and biocompatibility were evaluated by pyrogen detection, hemolysis analysis, cytotoxicity evaluation, and subcutaneous implantation experiments. adCDMs were implanted into rabbit articular cartilage defects for 2 months to evaluate their therapeutic effects.

Results

AdCDMs were observed to be rich in collagen and GAGs and devoid of cells. AdCDMs were also determined to have good biosafety and biocompatibility. Both four- and eight-week treatments of OCDs showed a flat and smooth surface of the healing cartilage at the adCDMs filled site. The international cartilage repair society scores (ICRS) of adCDMs were significantly higher than those of controls (porcine dCDMs and normal saline) (p < 0.05). The repaired tissue in the adCDM group was fibrotic with high collagen, specifically, type II collagen.

Conclusions

We concluded that adCDMs could achieve excellent cartilage regeneration repair in a rabbit knee OCDs model. Our study stresses the importance and benefits of adCDMs in bone formation and overall anatomical reconstitution, and it provides a novel source for developing cartilage-regenerating repair materials.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13036-021-00274-5.

Tracheal Repair with Human Umbilical Cord Mesenchymal Stem Cells Differentiated in Chondrocytes Grown on an Acellular Amniotic Membrane: A Pre-Clinical Approach

Acellular amniotic membrane (AM) has been studied, with promising results on the reconstruction of lesioned tissues, and has become an attractive approach for tracheal repair. This study aimed to evaluate the repair of the trachea with human umbilical cord mesenchymal stem cells (hucMSCs) differentiated in chondrocytes, grown on an experimental model. Tracheal defects were induced by surgical tracheostomy in 30 New Zealand rabbits, and the acellular amniotic membrane, with or without cells, was covering the defect. The hucMSCs were isolated and cultivated with chondrogenic differentiation over the culture of 14 days, and then grown on the AM. In this study, the AM was biocompatible and hucMSCs differentiated into chondrocytes. Our results demonstrated an important role for AM with cultured cells in the promotion of immature collagen, known to produce tissue regeneration. In addition, cartilaginous tissue was found at the tracheal defects, demonstrated by immunohistology results. This study suggests that this biomaterial implantation can be an effective future therapeutic alternative for patients with tracheal injury.

Osteochondral Tissue Engineering: The Potential of Electrospinning and Additive Manufacturing

The socioeconomic impact of osteochondral (OC) damage has been increasing steadily over time in the global population, and the promise of tissue engineering in generating biomimetic tissues replicating the physiological OC environment and architecture has been falling short of its projected potential. The most recent advances in OC tissue engineering are summarised in this work, with a focus on electrospun and 3D printed biomaterials combined with stem cells and biochemical stimuli, to identify what is causing this pitfall between the bench and the patients' bedside. Even though significant progress has been achieved in electrospinning, 3D-(bio)printing, and induced pluripotent stem cell (iPSC) technologies, it is still challenging to artificially emulate the OC interface and achieve complete regeneration of bone and cartilage tissues. Their intricate architecture and the need for tight spatiotemporal control of cellular and biochemical cues hinder the attainment of long-term functional integration of tissue-engineered constructs. Moreover, this complexity and the high variability in experimental conditions used in different studies undermine the scalability and reproducibility of prospective regenerative medicine solutions. It is clear that further development of standardised, integrative, and economically viable methods regarding scaffold production, cell selection, and additional biochemical and biomechanical stimulation is likely to be the key to accelerate the clinical translation and fill the gap in OC treatment.

Application of bone and cartilage extracellular matrices in articular cartilage regeneration

Articular cartilage has an avascular structure with a poor ability for self-repair; therefore, many challenges arise in cases of trauma or disease. It is of utmost importance to identify the proper biomaterial for tissue repair that has the capability to direct cell recruitment, proliferation, differentiation, and tissue integration by imitating the natural microenvironment of cells and transmitting an orchestra of intracellular signals. Cartilage extracellular matrix (cECM) is a complex nanostructure composed of divergent proteins and glycosaminoglycans (GAGs), which regulate many functions of resident cells. Numerous studies have shown the remarkable capacity of ECM-derived biomaterials for tissue repair and regeneration. Moreover, given the importance of biodegradability, biocompatibility, 3D structure, porosity, and mechanical stability in the design of suitable scaffolds for cartilage tissue engineering, demineralized bone matrix (DBM) appears to be a promising biomaterial for this purpose, as it possesses the aforementioned characteristics inherently. To the best of the authors' knowledge, no comprehensive review study on the use of DBM in cartilage tissue engineering has previously been published. Since so much work is needed to address DBM limitations such as pore size, cell retention, and so on, we decided to draw the attention of researchers in this field by compiling a list of recent publications. This review discusses the implementation of composite scaffolds of natural or synthetic origin functionalized with cECM or DBM in cartilage tissue engineering. Cutting-edge advances and limitations are also discussed in an attempt to provide guidance to researchers and clinicians.

Decellularized matrix could affect the proliferation and differentiation of periodontal ligament stem cells in vitro

OBJECTIVE AND BACKGROUND

Recently, decellularized matrix (DCM) is considered as a new biomaterial for tissue regeneration. To explore the possible application of DCM in periodontal regeneration, the effect of DCM from three different cells on the proliferation and differentiation of human periodontal ligament stem cells (PDLSCs) was investigated.

METHODS

DCM derived from human periodontal ligament cells (PDLCs), dental pulp cells (DPCs), and gingival fibroblasts (GFs) were fabricated using Triton X-100/NH₄ OH combined with DNase I. Allogeneic PDLSCs were cultured on PDLC-DCM, DPC-DCM, and GF-DCM, respectively. The proliferative capacity of PDLSCs was evaluated by PicoGreen assay kit. The expression of alkaline phosphatase (ALP), runt-related transcription factor-2 (RUNX2), osteocalcin (OCN), collagen I (COL1), periostin (POSTN), and cementum protein 1 (CEMP1) were detected by qRT-PCR and western blotting.

RESULTS

PDLC-DCM, DPC-DCM, and GF-DCM had similar and integrated networks of extracellular matrix, as well as significantly decreased DNA content. Compared with control group in which PDLSCs were directly seeded in culture plates, PDLC-DCM, DPC-DCM, and GF-DCM promoted the proliferation of re-seeded PDLSCs. Additionally, PDLSCs on DCM exhibited higher mRNA and protein expression levels of ALP, RUNX2, OCN, and COL1. The expression of POSTN in PDLC-DCM group was significantly higher than control group at both mRNA and protein levels.

CONCLUSIONS

PDLC-DCM, DPC-DCM, and GF-DCM could enhance the proliferation of PDLSCs. PDLC-DCM facilitated osteogenic differentiation and periodontal ligament differentiation of PDLSCs, while DPC-DCM and GF-DCM promoted osteogenic differentiation.

Decellularized xenogenic cartilage extracellular matrix (ECM) scaffolds for the reconstruction of osteochondral defects in rabbits

The use of decellularized native allogenic or xenogenic cartilaginous extracellular matrix (ECM) biomaterials is widely expanding in the fields of tissue engineering and regenerative medicine. In this study, we aimed to develop an acellular, affordable, biodegradable, easily available goat conchal cartilaginous ECM derived scaffolding biomaterial for repair and regeneration of osteochondral defects in rabbits. Cartilages harvested from freshly collected goat ears were decellularized using chemical agents, namely, hypotonic-hypertonic (HH) buffer and Triton X-100 solution, separately. The morphologies and ultrastructure orientations of the decellularized cartilages remained unaltered in spite of complete cellular loss. Furthermore, when the acellular cartilaginous ECMs were cultured with murine mesenchymal stem cells (MSCs) (C3H10T1/2 cells), cellular infiltration and proliferation were thoroughly monitored using SEM, DAPI and FDA stained images, whereas the MTT assay proved the biocompatibility of the matrices. The increasing amounts of secreted ECM proteins (collagen and sGAG) indicated successful chondrogenic differentiation of the MSCs in the presence of the treated cartilage samples. In vivo biocompatibility studies showed no significant immune response or tissue rejection in the treated samples but tissue necrosis in control samples after 3 months. Upon implantation of the constructs in rabbits' osteochondral defects for 3 months, the histological and micro-CT evaluation revealed significant enhancement and regeneration of neocartilage and subchondral bony tissues. The IGF-1 loaded cartilaginous constructs showed comparatively better healing response after 3 months. Our results showed that decellularized xenogenic cartilaginous biomaterials preserved the bioactivity and integrity of the matrices that also favored in vitro stem cell proliferation and chondrogenic differentiation and enabled osteochondral regeneration, thus paving a new way for articular cartilage reconstruction.

Nanoparticle-Cartilage Interaction: Pathology-Based Intra-articular Drug Delivery for Osteoarthritis Therapy

Osteoarthritis is the most prevalent chronic and debilitating joint disease, resulting in huge medical and socioeconomic burdens. Intra-articular administration of agents is clinically used for pain management. However, the effectiveness is inapparent caused by the rapid clearance of agents. To overcome this issue, nanoparticles as delivery systems hold considerable promise for local control of the pharmacokinetics of therapeutic agents. Given the therapeutic programs are inseparable from pathological progress of osteoarthritis, an ideal delivery system should allow the release of therapeutic agents upon specific features of disorders. In this review, we firstly introduce the pathological features of osteoarthritis and the design concept for accurate localization within cartilage for sustained drug release. Then, we review the interactions of nanoparticles with cartilage microenvironment and the rational design. Furthermore, we highlight advances in the therapeutic schemes according to the pathology signals. Finally, armed with an updated understanding of the pathological mechanisms, we place an emphasis on the development of "smart" bioresponsive and multiple modality nanoparticles on the near horizon to interact with the pathological signals. We anticipate that the exploration of nanoparticles by balancing the efficacy, safety, and complexity will lay down a solid foundation tangible for clinical translation.

Biological Treatments for Temporomandibular Joint Disc Disorders: Strategies in Tissue Engineering

The temporomandibular joint (TMJ) is an important structure for the masticatory system and the pathologies associated with it affect a large part of the population and impair people's lifestyle. It comprises an articular disc, that presents low regeneration capacities and the existing clinical options for repairing it are not effective. This way, it is imperative to achieve a permanent solution to guarantee a good quality of life for people who suffer from these pathologies. Complete knowledge of the unique characteristics of the disc will make it easier to achieve a successful tissue engineering (TE) construct. Thus, the search for an effective, safe and lasting solution has already started, including materials that replace the disc, is currently growing. The search for a solution based on TE approaches, which involve regenerating the disc. The present work revises the TMJ disc characteristics and its associated diseases. The different materials used for a total disc replacement are presented, highlighting the TE area. A special focus on future trends in the field and part of the solution for the TMJ problems described in this review will involve the development of a promising engineered disc approach through the use of decellularized extracellular matrices.

A Collagen-Mimetic Organic-Inorganic Hydrogel for Cartilage Engineering

Promising strategies for cartilage regeneration rely on the encapsulation of mesenchymal stromal cells (MSCs) in a hydrogel followed by an injection into the injured joint. Preclinical and clinical data using MSCs embedded in a collagen gel have demonstrated improvements in patients with focal lesions and osteoarthritis. However, an improvement is often observed in the short or medium term due to the loss of the chondrocyte capacity to produce the correct extracellular matrix and to respond to mechanical stimulation. Developing novel biomimetic materials with better chondroconductive and mechanical properties is still a challenge for cartilage engineering. Herein, we have designed a biomimetic chemical hydrogel based on silylated collagen-mimetic synthetic peptides having the ability to encapsulate MSCs using a biorthogonal sol-gel cross-linking reaction. By tuning the hydrogel composition using both mono- and bi-functional peptides, we succeeded in improving its mechanical properties, yielding a more elastic scaffold and achieving the survival of embedded MSCs for 21 days as well as the up-regulation of chondrocyte markers. This biomimetic long-standing hybrid hydrogel is of interest as a synthetic and modular scaffold for cartilage tissue engineering.

Alginate/cartilage extracellular matrix-based injectable interpenetrating polymer network hydrogel for cartilage tissue engineering

In the present study, alginate/cartilage extracellular matrix (ECM)-based injectable hydrogel was developed incorporated with silk fibroin nanofibers (SFN) for cartilage tissue engineering. The in situ forming hydrogels were composed of different ionic crosslinked alginate concentrations with 1% w/v enzymatically crosslinked phenolized cartilage ECM, resulting in an interpenetrating polymer network (IPN). The response surface methodology (RSM) approach was applied to optimize IPN hydrogel's mechanical properties by varying alginate and SFN concentrations. The results demonstrated that upon increasing the alginate concentration, the compression modulus improved. The SFN concentration was optimized to reach a desired mechanical stiffness. Accordingly, the concentrations of alginate and SFN to have an optimum compression modulus in the hydrogel were found to be 1.685 and 1.724% w/v, respectively. The gelation time was found to be about 10 s for all the samples. Scanning electron microscope (SEM) images showed homogeneous dispersion of the SFN in the hydrogel, mimicking the natural cartilage environment. Furthermore, water uptake capacity, degradation rate, cell cytotoxicity, and glycosaminoglycan and collagen II secretions were determined for the optimum hydrogel to support its potential as an injectable scaffold for articular cartilage defects.

Therapeutic Effects of Human Umbilical Cord Blood-Derived Mesenchymal Stem Cells Combined with Cartilage Acellular Matrix Mediated Via Bone Morphogenic Protein 6 in a Rabbit Model of Articular Cruciate Ligament Transection

Osteoarthritis (OA) is a general joint disease. Cartilage damage is associated with a decrease in the density of chondrocytes. Mesenchymal stem cells (MSCs) differentiate into adipocytes, osteocytes and chondrocytes, and are an excellent source of cell therapy. Cartilage-derived extracellular matrix (ECM) promotes chondrogenesis of MSCs. However, the role of MSCs stimulated by ECM is not well known in OA. The purpose of this study is to determine the role of specific factors generated by the application of ECM and umbilical cord blood-derived mesenchymal stem cells (UCB-MSCs) in managing OA symptoms. Cartilage acellular matrix (CAM), which is a cartilage-derived ECM, was used to promote the chondrogenesis of UCB-MSCs. Induced MSCs were analyzed using chondrogenic markers (aggrecan, collagen type 2, and SOX9) and bone morphogenic protein 6 (BMP6). BMP6 is known to be involved in early chondrogenesis of MSCs. As a result, treatment with CAM significantly increased the expression of chondrogenic markers and BMP6 in UCB-MSCs. Treatment with recombinant human BMP6 also dramatically increased the levels of chondrogenic markers in UCB-MSCs. In addition, UCB-MSCs and CAM were used to evaluate OA symptom improvement in a rabbit articular cruciate ligament transection (ACLT) model. Application of UCB-MSCs and CAM enhanced not only the structure and synthesis of proteoglycan and collagen type 2 but also anti-inflammatory effects in both rabbit joint and synovial fluid. Moreover, the detection of human cells and involvement of BMP6 were confirmed in rabbit cartilage tissues. This study indicates that therapeutic potential of UCB-MSCs with CAM is mediated via BMP6 in OA.

The development of natural polymer scaffold-based therapeutics for osteochondral repair

Due to the limited regenerative capacity of cartilage, untreated joint defects can advance to more extensive degenerative conditions such as osteoarthritis. While some biomaterial-based tissue-engineered scaffolds have shown promise in treating such defects, no scaffold has been widely accepted by clinicians to date. Multi-layered natural polymer scaffolds that mimic native osteochondral tissue and facilitate the regeneration of both articular cartilage (AC) and subchondral bone (SCB) in spatially distinct regions have recently entered clinical use, while the transient localized delivery of growth factors and even therapeutic genes has also been proposed to better regulate and promote new tissue formation. Furthermore, new manufacturing methods such as 3D bioprinting have made it possible to precisely tailor scaffold micro-architectures and/or to control the spatial deposition of cells in requisite layers of an implant. In this way, natural and synthetic polymers can be combined to yield bioactive, yet mechanically robust, cell-laden scaffolds suitable for the osteochondral environment. This mini-review discusses recent advances in scaffolds for osteochondral repair, with particular focus on the role of natural polymers in providing regenerative templates for treatment of both AC and SCB in articular joint defects.

3D-Bioprinted Difunctional Scaffold for In Situ Cartilage Regeneration Based on Aptamer-Directed Cell Recruitment and Growth Factor-Enhanced Cell Chondrogenesis

Articular cartilage (AC) lesions are fairly common but remain an obstacle for clinicians and researchers due to their poor self-healing capacity. Recently, a promising therapy based on the recruitment of autologous mesenchymal stem cells (MSCs) has been developed for the regeneration of full-thickness cartilage defects in the knee joint. In this study, a 3D-bioprinted difunctional scaffold was developed based on aptamer HM69-mediated MSC-specific recruitment and growth factor-enhanced cell chondrogenesis. The aptamer, which can specifically recognize and recruit MSCs, was first chemically conjugated to the decellularized cartilage extracellular matrix and then mixed with gelatin methacrylate to form a photocrosslinkable bioink ready for 3D bioprinting. Together with the growth factor that promoted cell chondrogenic differentiation, the biodegradable polymer poly(ε-caprolactone) was further chosen to impart mechanical strength to the 3D bioprinted constructs. The difunctional scaffold specifically recruited MSCs, provided a favorable microenvironment for cell adhesion and proliferation, promoted chondrogenesis, and thus greatly improved cartilage repair in rabbit full-thickness defects. In conclusion, this study demonstrated that 3D bioprinting of difunctional scaffolds could be a promising strategy for in situ AC regeneration based on aptamer-directed cell recruitment and growth-factor-enhanced cell chondrogenesis.

Osteogenesis of 3D-Printed PCL/TCP/bdECM Scaffold Using Adipose-Derived Stem Cells Aggregates; An Experimental Study in the Canine Mandible

Three-dimensional (3D) printing is perceived as an innovative tool for change in tissue engineering and regenerative medicine based on research outcomes on the development of artificial organs and tissues. With advances in such technology, research is underway into 3D-printed artificial scaffolds for tissue recovery and regeneration. In this study, we fabricated artificial scaffolds by coating bone demineralized and decellularized extracellular matrix (bdECM) onto existing 3D-printed polycaprolactone/tricalcium phosphate (PCL/TCP) to enhance osteoconductivity and osteoinductivity. After injecting adipose-derived stem cells (ADSCs) in an aggregate form found to be effective in previous studies, we examined the effects of the scaffold on ossification during mandibular reconstruction in beagle dogs. Ten beagles were divided into two groups: group A (PCL/TCP/bdECM + ADSC injection; n = 5) and group B (PCL/TCP/bdECM; n = 5). The results were analyzed four and eight weeks after intervention. Computed tomography (CT) findings showed that group A had more diffuse osteoblast tissue than group B. Evidence of infection or immune rejection was not detected following histological examination. Goldner trichrome (G/T) staining revealed rich ossification in scaffold pores. ColI, Osteocalcin, and Runx2 gene expressions were determined using real-time polymerase chain reaction. Group A showed greater expression of these genes. Through Western blotting, group A showed a greater expression of genes that encode ColI, Osteocalcin, and Runx2 proteins. In conclusion, intervention group A, in which the beagles received the additional ADSC injection together with the 3D-printed PCL/TCP coated with bdECM, showed improved mandibular ossification in and around the pores of the scaffold.

A review of biomimetic scaffolds for bone regeneration: Toward a cell-free strategy

In clinical terms, bone grafting currently involves the application of autogenous, allogeneic, or xenogeneic bone grafts, as well as natural or artificially synthesized materials, such as polymers, bioceramics, and other composites. Many of these are associated with limitations. The ideal scaffold for bone tissue engineering should provide mechanical support while promoting osteogenesis, osteoconduction, and even osteoinduction. There are various structural complications and engineering difficulties to be considered. Here, we describe the biomimetic possibilities of the modification of natural or synthetic materials through physical and chemical design to facilitate bone tissue repair. This review summarizes recent progresses in the strategies for constructing biomimetic scaffolds, including ion-functionalized scaffolds, decellularized extracellular matrix scaffolds, and micro- and nano-scale biomimetic scaffold structures, as well as reactive scaffolds induced by physical factors, and other acellular scaffolds. The fabrication techniques for these scaffolds, along with current strategies in clinical bone repair, are described. The developments in each category are discussed in terms of the connection between the scaffold materials and tissue repair, as well as the interactions with endogenous cells. As the advances in bone tissue engineering move toward application in the clinical setting, the demonstration of the therapeutic efficacy of these novel scaffold designs is critical.

Enhanced articular cartilage decellularization using a novel perfusion-based bioreactor method

Current decellularization methods for articular cartilages require many steps, various and high amounts of detergents, and a relatively long time to produce decellularized scaffolds. In addition, such methods often damage the essential components and the structure of the tissue. This study aims to introduce a novel perfusion-based bioreactor (PBB) method to decellularize bovine articular cartilages efficiently while reducing the harmful physical and chemical steps as well as the duration of the process. This leads to better preservation of the structure and the essential components of the native tissue. Firstly, a certain number of channels (Ø 180 μm) were introduced into both sides of cylindrical articular bovine cartilage disks (5 mm in diameter and 1 mm in thickness). Next, the disks were decellularized in the PBB and a shaker as the control. Using the PBB method resulted in ∼90% reduction of DNA content in the specimens, which was significantly higher than those of the shaker results with ∼60%. Also, ∼50% sulfated glycosaminoglycan (sGAG) content and ∼92% of the compression properties were maintained implying the efficient preservation of the structure and components of the scaffolds. Moreover, the current study indicated that the PBB specimens supported the adherence and proliferation of the new cells effectively. In conclusion, the results show that the use of PBB method increases the efficiency of producing decellularized cartilage scaffolds with a better maintenance of essential components and structure, while reducing the chemicals and steps required for the process. This will pave the way for producing close-to-natural scaffolds for cartilage tissue engineering.

Fabrication and characterization of an injectable reinforced composite scaffold for cartilage tissue engineering: an in vitro study

There are limitations in current medications of articular cartilage injuries. Although injectable bioactive hydrogels are promising options, they have decreased biomechanical performance. Researchers should consider many factors when providing solutions to overcome these challenges. In this study, we created an injectable composite hydrogel from chitosan and human acellular cartilage extracellular matrix (ECM) particles. In order to enhance its mechanical properties, we reinforced this hydrogel with microporous microspheres composed of the same materials as the structural building blocks of the scaffold. Articular cartilage from human donors was decellularized by a combination of physical, chemical, and enzymatic methods. The decellularization efficiency was assessed by histological analysis and assessment of DNA content. We characterized the composite constructs in terms of storage modulus, gelation time, biocompatibility, and differentiation potential. The results showed that mechanical behavior increased with an increase in microsphere content. The sample that contained 10% microsphere had an enhanced storage modulus of up to 90 kPa. Biocompatibility and preliminary differentiation investigations revealed that this composite hydrogel might have potential benefits for cartilage tissue engineering.

An update on stem cells applications in burn wound healing

Burn wounds have proven to be capable of having a long lasting devastating effects on human body. Conventional therapeutic approaches are not up to the mark as they are unable to completely heal the burn wound easily and effectively. Major pitfalls of these treatments include hypertrophic scarring, contracture and necrosis. Presence of these limitations in the current therapies necessitate the search for a better and more efficient cure. Regenerative potency of stem cells in burn wound healing outweigh the traditional treatment procedures. The use of multiple kinds of stem cells are gaining interest due to their enhanced healing efficiency. Distinctions of stem cells include better and faster burn wound healing, decreased inflammation levels, less scar progression and fibrosis on site. In this review, we have discussed the wound-healing process, present methods used for stem cells administration, methods of enhancing stem cells potency and human studies. Pre-clinical and the clinical studies focused on the treatment of thermal and radiation burns using stem cells from 2003 till the present time have been enlisted. Studies shows that the use of stem cells on burn wounds, whether alone or by the help of a scaffold significantly improves healing. Homing of the stem cells at the wound site results in the re-epithelialization, angiogenesis, granulation, inhibition of apoptosis, and regeneration of skin appendages together with reduced infection rate in the human studies. Several studies on animals have shown that stem cells can effectively promote wound healing. Although more research is needed to find out the effectiveness of this treatment in patients with severe burn wounds.

Fish cartilage: A promising source of biomaterial for biological scaffold fabrication in cartilage tissue engineering

Here, engineered cartilage-like scaffold using an extracellular matrix (ECM) from sturgeon fish cartilage provided a chondroinductive environment to stimulate cartilaginous matrix synthesis in human adipose stem cells (hASCs). Three dimensional porous and degradable fish cartilage ECM-derived scaffold (FCS) was produced using a protocol containing chemical decellularization, enzymatic solubilization, freeze-drying and EDC-crosslinking treatments and the effect of different ECM concentrations (10, 20, 30, and 40 mg/ml) on prepared scaffolds was investigated through physical, mechanical and biological analysis. The histological and scanning electron microscopy analysis revealed the elimination of the cell fragments and a 3-D interconnected porous structure, respectively. Cell viability assay displayed no cytotoxic effects. The prepared porous constructs of fish cartilage ECM were seeded with hASCs for 21 days and compared to collagen (Col) and collagen-10% hyaluronic acid (Col-HA) scaffolds. Cell culture results evidenced that the fabricated scaffolds could provide a proper 3-D structure to support the adhesion, proliferation and chondrogenic differentiation of hASCs considering the synthesis of specific proteins of cartilage, collagen type II (Col II) and aggrecan (ACAN). Based on the results of the present study, it can be concluded that the porous scaffold derived from fish cartilage ECM possesses an excellent potential for cartilage tissue engineering.

Biofunctional Extracellular Matrix-Polycaprolactone-Hydroxyapatite Scaffold and Synovium Mesenchymal Stem Cells/Chondrocytes for Repairing Cartilage Defects

Articular cartilage defects and degeneration can be caused by multiple factors, and the current clinical treatment schemes for pathological changes are relatively limited. Engineered cartilage tissue represents an alternative therapy for repairing cartilage defects in regenerative medicine. The scaffold material is considered the framework of tissue engineering; thus, scaffold material selection plays a crucial role in the therapy outcome. Polycaprolactone (PCL)-hydroxyapatite (HA) has been applied as a scaffold material for bone and cartilage tissue engineering with nontoxic, harmless metabolites and proper physical properties. The extracellular matrix (ECM) is mainly composed of collagen and proteoglycan, as well as a large number of growth factors and cytokines, which provide a tissue-specific microenvironment for host cells. Adipose-derived stem cells are pluripotent stem cells, and transforming growth factor-β3 (TGF-β3) enables mesenchymal stem cells to promote ECM production. This study, via in vitro and in vivo experiments, elucidated that the synovium mesenchymal stem cells (SMSCs) + chondrocytes + ECM-PCL-HA repair system, which is constructed upon the ECM-PCL-HA scaffold material, exhibits an adequate chondrogenic ability and reparatory effect. Overall, ECM-PCL-HA can be defined as a biofunctional scaffold material. The SMSCs + chondrocytes + ECM-PCL-HA repair system showed good confluency between the new cartilage and the surface, as well as the interface of the adjacent host cartilage. Furthermore, the structure of new cartilage tissue is consistent with adjacency. Thus, it can be used as a preferred plan for articular cartilage defect repair.

Decellularized bone extracellular matrix in skeletal tissue engineering

Bone possesses an intrinsic regenerative capacity, which can be compromised by aging, disease, trauma, and iatrogenesis (e.g. tumor resection, pharmacological). At present, autografts and allografts are the principal biological treatments available to replace large bone segments, but both entail several limitations that reduce wider use and consistent success. The use of decellularized extracellular matrices (ECM), often derived from xenogeneic sources, has been shown to favorably influence the immune response to injury and promote site-appropriate tissue regeneration. Decellularized bone ECM (dbECM), utilized in several forms - whole organ, particles, hydrogels - has shown promise in both in vitro and in vivo animal studies to promote osteogenic differentiation of stem/progenitor cells and enhance bone regeneration. However, dbECM has yet to be investigated in clinical studies, which are needed to determine the relative efficacy of this emerging biomaterial as compared with established treatments. This mini-review highlights the recent exploration of dbECM as a biomaterial for skeletal tissue engineering and considers modifications on its future use to more consistently promote bone regeneration.

Hyaluronic acid oligosaccharides modified mineralized collagen and chitosan with enhanced osteoinductive properties for bone tissue engineering

In this study, we prepared a biomimetic hyaluronic acid oligosaccharides (oHAs)-based composite scaffold to develop a bone tissue-engineered scaffold for stimulating osteogenesis and endothelialization. The functional oHAs products were firstly synthesized, namely collagen/hyaluronic acid oligosaccharides/hydroxyapatite (Col/oHAs/HAP), chitosan/hyaluronic acid oligosaccharides (CTS/oHAs), and then uniformly distributed in poly (lactic-co-glycolic acid) (PLGA) solution followed by freeze-drying to obtain three-dimensional interconnected scaffolds as temporary templates for bone regeneration. The morphology, physicochemical properties, compressive strength, and degradation behavior of the fabricated scaffolds, as well as in vitro cell responses seeded on these scaffolds and in vivo biocompatibility, were investigated to evaluate the potential for bone tissue engineering. The results indicated that the oHAs-based scaffolds can promote the attachment of endothelial cells, facilitate the osteogenic differentiation of MC3T3-E1 and BMSCs, and have ideal biocompatibility and tissue regenerative capacity, suggesting their potential to serve as alternative candidates for bone tissue engineering applications.

Characterization of defined sulfated heparin-like oligosaccharides by electrospray ionization ion trap mass spectrometry

Glycosaminoglycans (GAG) as long, unbranched polysaccharides are major components of the extracellular matrix. Many studies provided additional evidence of a specific binding between mediators and sulfated GAG, at which the sulfation code-which means the number and positions of sulfate groups along the polysaccharide chain-plays an important role. GAG from natural sources are very inhomogeneous regarding their sulfation patterns and molecular weight. Additionally, there is a high risk of contamination. This results in a growing interest in the careful characterization of native GAG and the synthesis of artificial GAG. Additionally, chemically oversulfated GAG analogues show many favorable properties. However, the structural characterization of these carbohydrates by mass spectrometry remains challenging. One significant problem is the sulfate loss during the ionization, which increases with the number of sulfate residues. We used the sulfated pentasaccharide fondaparinux as model substance to optimize sample preparation and measurement conditions, compared different established desalination methods and already existing protocols for sulfated oligosaccharides, and investigated their impact on the quality of the mass spectra. After optimization of the measurement conditions, we could establish a gentle and fast protocol for the mass spectrometry characterization of (fully) sulfated, artificial GAG-like oligosaccharides with minimized sulfate loss in the positive and negative ion mode. Here, the negative ion mode was more sensitive in comparison with the positive one, and fondaparinux species with sulfate loss were not detectable under the optimized conditions in the positive ion mode.

Engineering of axially vascularized bone tissue using natural coral scaffold and osteogenic bone marrow mesenchymal stem cell sheets

INTRODUCTION

Blood supply remains one of the obstacles to large bone tissue engineering. This study aimed to generate vascularized bone tissue by inducing axial vascularization into a construct combining natural coral scaffold and a bone marrow mesenchymal stem cells (BMSCs) sheet.

MATERIAL AND METHODS

Isolated BMSCs were cultured to form an osteogenic cell sheet using a continuous culture method. Natural coral scaffolds were prepared into customized shape with a cylinder of 20 mm length, 8 mm in outer diameter and 5 mm in inner diameter. Then, the freed superficial inferior epigastric vessel of rabbits was first wrapped with a cell sheet, and then inserted into the central passage of the scaffold, after being wrapped with another cell sheet, the complexes were implanted subcutaneously into a rabbit groin area. In contrast, the sheet-scaffold construct that implanted into groin subcutaneous area of the other side of the same rabbit with the distal end of the blood vessel was ligated, which was considered as control. New bone and vascularization formation were evaluated at 12 weeks postoperatively.

RESULTS

The volume of new bone formation and amount of capillary infiltration in the vascular circulation group were significantly greater than that in the vascular ligation group, which suggested that insertion of axial vessels could significantly promote angiogenesis and osteogenesis of the tissue-engineered bone.

CONCLUSIONS

These findings indicate that inserting an arteriovenous bundle into the constructs of mesenchymal stem cell sheet and coral has great potential for clinical applications to repair large bone defects.

Boosting osteogenic potential and bone regeneration by co-cultured cell derived extracellular matrix incorporated porous electrospun scaffold

Implants for bone regeneration to remedy segmental bone defects, osteomyelitis, necrotic bone tissue and non-union fractures have worldwide appeal. Although biomaterials offer most of the advantages by improving tissue growth but developments are more commonly achieved via biologically derived molecules. To aid site specific bone tissue regeneration by synthetic scaffold, cell derived extracellular matrix (ECM) can be a crucial component. In this study, co-cultured bone marrow mesenchymal stem cell and osteoblastic cells derived ECM incorporated electrospun polycaprolactone (PCL) membranes were assessed for bone tissue engineering application. The preliminary experimental details indicated that, co-culture of cells supported enhanced in vitro ECM synthesis followed by successful deposition of osteoblastic ECM into electrospun membranes. The acellular samples revealed retention of ECM related biomacromolecules (collagen, glycosaminoglycan) and partial recovery of pores after decellularization. In vitro biocompatibility tests ensured improvement of proliferation and osteoblastic differentiation of MC3T3-E1 cells in decellularized ECM containing membrane (PCL-ECM) compared to bare membrane (PCL-B) which was further confirmed by osteogenic marker proteins expression analysis. The decellularized PCL-ECM membrane allowed great improvement of bone regeneration over the bare membrane (PCL-B) in 8 mm size critical sized rat skull defects at 2 months of post implantation. In short, the outcome of this study could be impactful in development and application of cell derived ECM based synthetic electrospun templates for bone tissue engineering application.[Formula: see text].

Biomimetic hydrogels designed for cartilage tissue engineering

Cartilage-like hydrogels based on materials like gelatin, chondroitin sulfate, hyaluronic acid and polyethylene glycol are reviewed and contrasted, revealing existing limitations and challenges on biomimetic hydrogels for cartilage regeneration.

Effects of nanopatterned-surface dishes on chondrocyte growth and cell cycle progression

Discovering and developing ideal cell culture methods is important for cell biology, drug development, and cell therapy. Recent studies have explored and demonstrated the use of nanoscale structures and patterns that influence cell behavior, such as 3D scaffolds. In this study, we analyzed the effects of nanopatterned-surface dishes using chondrocytes as model cells. Chondrocytes grown on nanopatterned dishes exhibited rounded shapes. Interestingly, chondrocytes have a lower COL10 mRNA level when cultured using nanopatterned dishes. The nanopatterned dishes induced G0-/G1-phase cell cycle arrest and reduced the rate of proliferation. Our results suggest that nanoscale structures can directly control cellular behaviors and can be used for chondrocyte cell culture without causing chondrocytes to lose their functions. These results help to elucidate cellular responses and behaviors in native-like environments, and this information can be used to improve human health.

Decellularized pulp matrix as scaffold for mesenchymal stem cell mediated bone regeneration

Scaffolds that are used for bone repair should provide an adequate environment for biomineralization by mesenchymal stem cells (MSCs). Recently, decellularized pulp matrices (DPM) have been utilized in endodontics for their high regenerative potential. Inspired by the dystrophic calcification on the pulp matrix known as pulp stone, we developed acellular pulp bioscaffolds and examined their potential in facilitating MSCs mineralization for bone defect repair. Pulp was decellularized, then retention of its structural integrity was confirmed by histological, mechanical, and biochemical evaluations. MSCs were seeded and proliferation, osteogenic gene expression, and biomineralization were assessed to verify DPM's osteogenic effects in vitro. MicroCT, energy-dispersive X-ray (EDX), and histological analyses were used to confirm that DPM seeded with MSCs result in greater mineralization on rat critical-sized defects than that without MSCs. Overall, our study proves DPM's potential to serve as a scaffolding material for MSC-mediated bone regeneration for future craniofacial bone tissue engineering.

Stem Cell-Friendly Scaffold Biomaterials: Applications for Bone Tissue Engineering and Regenerative Medicine

Bone is a dynamic organ with high regenerative potential and provides essential biological functions in the body, such as providing body mobility and protection of internal organs, regulating hematopoietic cell homeostasis, and serving as important mineral reservoir. Bone defects, which can be caused by trauma, cancer and bone disorders, pose formidable public health burdens. Even though autologous bone grafts, allografts, or xenografts have been used clinically, repairing large bone defects remains as a significant clinical challenge. Bone tissue engineering (BTE) emerged as a promising solution to overcome the limitations of autografts and allografts. Ideal bone tissue engineering is to induce bone regeneration through the synergistic integration of biomaterial scaffolds, bone progenitor cells, and bone-forming factors. Successful stem cell-based BTE requires a combination of abundant mesenchymal progenitors with osteogenic potential, suitable biofactors to drive osteogenic differentiation, and cell-friendly scaffold biomaterials. Thus, the crux of BTE lies within the use of cell-friendly biomaterials as scaffolds to overcome extensive bone defects. In this review, we focus on the biocompatibility and cell-friendly features of commonly used scaffold materials, including inorganic compound-based ceramics, natural polymers, synthetic polymers, decellularized extracellular matrix, and in many cases, composite scaffolds using the above existing biomaterials. It is conceivable that combinations of bioactive materials, progenitor cells, growth factors, functionalization techniques, and biomimetic scaffold designs, along with 3D bioprinting technology, will unleash a new era of complex BTE scaffolds tailored to patient-specific applications.