Microextraction by packed sorbent (MEPS)

Miniaturized analytical methods for determination of environmental contaminants of emerging concern - A review

The determination of contaminants of emerging concern (CECs) in environmental samples has become a challenging and critical issue. The present work focuses on miniaturized analytical strategies reported in the literature for the determination of CECs. The first part of the review provides brief overview of CECs whose monitoring in environmental samples is of particular significance, namely personal care products, pharmaceuticals, endocrine disruptors, UV-filters, newly registered pesticides, illicit drugs, disinfection by-products, surfactants, high technology rare earth elements, and engineered nanomaterials. Besides, an overview of downsized sample preparation approaches reported in the literature for the determination of CECs in environmental samples is provided. Particularly, analytical methodologies involving microextraction approaches used for the enrichment of CECs are discussed. Both solid phase- and liquid phase-based microextraction techniques are highlighted devoting special attention to recently reported approaches. Special emphasis is placed on newly developed materials used for extraction purposes in microextraction techniques. In addition, recent contributions involving miniaturized analytical flow techniques for the determination of CECs are discussed. Besides, the strengths, weaknesses, opportunities and threats of point of need and portable devices have been identified and critically compared with chromatographic methods coupled to mass chromatography. Finally, challenging aspects regarding miniaturized analytical methods for determination of CECs are critically discussed.

Microextraction on a screw for determination of trace amounts of hexanal and heptanal as lung cancer biomarkers

Solid phase microextraction on a screw was utilized for the extraction of hexanal and heptanal as lung cancer biomarkers from urine samples. Reduced graphene oxide (rGO) was coated on the surface of a stainless-steel set screw by electrophoretic deposition method. The screw was located inside a glass cover, and the created channel acted as the sample solution flow pass. A 5 mL glass syringe was connected to a syringe pump to direct the sample and the eluent through the channel. The extraction procedure was followed by gas chromatography/mass spectrometry (GC/MS) for separation and determination of the extracted aldehydes. The effective parameters on the extraction efficiencies of the analytes were identified and optimized. Under the optimal extraction conditions, the extraction time was as short as 10 min. The calibration curves indicated good linearity (R² > 0.97) within the concentration range of 1.0-50 μg L^-1. The obtained limits of detection (LODs) for hexanal and heptanal were down to 0.4 and 0.3 μg L^-1, respectively. Considering the repeatability, simplicity, and eco-friendliness of this simple extraction method, it can be efficiently used for preconcentration of aldehydes in different samples.

Microextraction by packed sorbent and high performance liquid chromatography for simultaneous determination of lumefantrine and desbutyl-lumefantrine in plasma samples

A bioanalytical method for the determination of lumefantrine and its metabolite desbutyl-lumefantrine in plasma samples using microextraction by packed sorbent (MEPS) and high-performance liquid chromatography was developed and validated. A complete factorial planning and surface response approach were employed to optimize the extraction parameters sample volume, dilution, aspirated sample volume and extraction cycles. The method employed C18 MEPS sorbent and diazepam as internal standard (IS). Separation was performed on a Luna C18 column (250 mm × 4.6 mm, 5 μm) at 35 °C, with mobile phase composed of acetonitrile and 0.05 % trifluoroacetic acid (68:32, v/v), detection at 305 nm and injection volume of 25 μL. The developed method showed to be selective, precise, accurate and linear in the range of 50-5000 ng/mL for lumefantrine and desbutyl-lumefantrine. Using the optimized MEPS procedure, high recovery rates were obtained for both analytes and IS (92.2 %-99.0 %). The method was successfully applied for the determination of lumefantrine and its metabolite in human plasma samples after oral administration of lumefantrine tablets in healthy volunteers.

New miniaturized clean-up procedure for hair samples by means of microextraction by packed sorbent: determination of cocaine and metabolites

Cocaine is still one of the most commonly used illicit substances worldwide, with an estimated 4 million users in Europe in the last year. Hair samples have been widely used for the determination of episodic or repeated consumption of this substance, but the use of miniaturized techniques for hair sample clean-up has been challenging due to the sample complexity. Despite hair's complex matrix, MEPS provides a method that is fast, reduces the volume of extraction solvents used, and offers low-cost options (since extraction beds may be reused several times). Microextraction by packed sorbent using a mixed-mode sorbent was optimized for hair sample clean-up in order to determine cocaine, benzoylecgonine, ecgonine methyl ester, norcocaine, cocaethylene and anhydroecgonine methyl ester by gas chromatography coupled to tandem mass spectrometry. The method was fully validated according to internationally accepted criteria, presenting good linearity between the limits of quantification (0.01-0.15) and 5 ng/mg. Precision and accuracy resulted in coefficients of variation typically lower than 15%, with mean relative errors within ±15% for all compounds, except for the limit of quantification (±20%). The present work describes the first application of microextraction by packed sorbent for the concentration of cocaine and metabolites extracted from hair samples. Graphical abstract.

Mixed Matrix Membrane Tip Extraction Coupled with UPLC–MS/MS for the Monitoring of Nonsteroidal Anti-Inflammatory Drugs in Water Samples

An ultra-performance liquid chromatography–tandem mass spectrometry (UPLC–MS/MS) method, in combination with a mixed matrix membrane microextraction method for the quantification of nonsteroidal anti-inflammatory drugs (NSAIDs) in environmental water samples, is reported. The extraction device was prepared by casting well-dispersed polymeric bonded octadecyl (C18) particles in a cellulose triacetate matrix solution onto commercially available 200 μL micropipette tips. The membrane formed contains 25% of the adsorbent loading amount and was firmly attached to the inner wall of the membrane tip. The dynamic extraction was performed by withdrawing and dispensing the sample solution through the tip device for effective analyte adsorption, followed by the analyte desorption process into 40 μL of methanol and acetonitrile (1:1) prior to UPLC–MS/MS analysis. NSAIDs—namely diclofenac, ibuprofen, indoprofen, naproxen and sulindac—were chosen as targeted analytes. Several extraction parameters were comprehensively optimized, including sample pH value, ionic strength, dynamic extraction cycle, desorption solvent and desorption time. The optimized conditions demonstrated a linear range from 0.25 to 500 ng L−1, with correlation coefficients (r2) from 0.9988 to 0.9992 and detection limits ranging from 0.08 to 0.40 ng L−1. The recoveries of the spiked water samples were between 92% and 99% and exhibited excellent precision relative to standard deviations (RSDs ≤ 4.9%), and enrichment factors (EFs) were at 201–249 for the developed approach.

Solid phase microextraction techniques used for gas chromatography: a review

In the last decade, the development and adoption of greener and sustainable microextraction techniques have been proved to be an effective alternative to classical sample preparation procedures. In this review, 10 commercially available solid-phase microextraction systems are presented, with special attention to the appraisal of their analytical, bioanalytical, and environmental engineering. This review provides an overview of the challenges and achievements in the application of fully automated miniaturized sample preparation methods in analytical laboratories. Both theoretical and practical aspects of these environment-friendly preparation approaches are discussed. The application of chemometrics in method development is also discussed. We are convinced that green analytical chemistry will be really useful in the years ahead. The application of cheap, fast, automated, “clever”, and environmentally safe procedures to environmental, clinical, and food analysis will improve significantly the quality of the analytical data.

Microextraction approaches for bioanalytical applications: An overview

Biological samples are usually complex matrices due to the presence of proteins, salts and a variety of organic compounds with chemical properties similar to those of the target analytes. Therefore, sample preparation is often mandatory in order to isolate the analytes from troublesome matrices before instrumental analysis. Because the number of samples in drug development, doping analysis, forensic science, toxicological analysis, and preclinical and clinical assays is steadily increasing, novel high throughput sample preparation approaches are calling for. The key factors in this development are the miniaturization and the automation of the sample preparation approaches so as to cope with most of the twelve principles of green chemistry. In this review, recent trends in sample preparation and novel strategies will be discussed in detail with particular focus on sorptive and liquid-phase microextraction in bioanalysis. The actual applicability of selective sorbents is also considered. Additionally, the role of 3D printing in microextraction for bioanalytical methods will be pinpointed.

Microextraction on a screw

For the first time, a rapid, efficient, simple, and inexpensive approach for solid phase microextraction on a screw (MES) was developed. MES is a miniaturized form of solid-phase extraction without any backpressure. In this system, analytes were adsorbed on the surface of micro channels of a screw that was coated by polypyrrole (PPy). Based on this procedure, the analytes are adsorbed on the solid phase and then eluted by a desorption solvent. The MES method followed by gas chromatography-mass spectrometry (MES-GC-MS) was applied for the rapid extraction and determination of six polycyclic aromatic hydrocarbons (PAHs) (as model analytes) in well water samples. Several parameters affecting the extraction procedure, including the sampling flow rate, the number of the loading/desorption cycles of the sample, and the volume of the desorption solvent, were evaluated and optimized. Under optimum conditions, the detection limits for the PAHs varied between 0.5 and 1 μg L^-1 and linear ranges varied between 2 and 600 μg L^-1. The results showed good correlation coefficients (R > 0.99) for all of the analytes in the studied calibration range. The relative recovery (RR%) of the desired MES-GC-MS method for the studied PAHs was between 83.0 and 104.0% and the interday and intraday precision (n = 5 days), expressed as relative standard deviation (RSD %), were between 3.9-6.2% and 6.2-8.9%, respectively. To evaluate the matrix effect, the developed method was also applied for preconcentration and determination of the selected PAHs in real water samples, and good results were obtained.

A new approach to preparation of antisense oligonucleotide samples with microextraction by packed sorbent

Our research focused on applying microextraction by packed sorbent to extracting antisense oligonucleotides from serum samples. The tested sorbents included poly(styrene-co-divinylbenzene), octyl, octadecyl, and unmodified silica gel. As nonpolar sorbents were used for highly-polar molecules, this required ion-pair mode. Comprehensive optimization of extraction conditions was performed for 20-mer phosphorothioate oligonucleotide. Several parametres - the number of "draw-eject" cycles during the conditioning and load step, the amine type and concentration, and the volume of elution mixture - and the influence they had on recovery were studied for nonpolar sorbents, which made it possible to obtain high (ca. 90%) recovery values. The most influential parameter turned out to be the volume of elution mixture. Similar optimization was performed for silica sorbents; however, despite optimization of various parameters, the recovery values stayed relatively low. The optimized procedures for nonpolar sorbents were applied in extraction of six different oligonucleotides of various length and with different structure modifications. The highest recoveries were obtained for octyl and octadecyl sorbents, ranging between 80-99%. The developed microextraction method was used to extract phosphorothioate and 2'-O-(2-methoxyethyl) oligonucleotides and their two synthetic metabolites from enriched human plasma, with recoveries around 70-80%.

Determination of Selected Opiates in Hair Samples Using Microextraction by Packed Sorbent: A New Approach for Sample Clean-up

In this article the development and validation of an analytical method using microextraction by packed sorbent (MEPS) to determine tramadol (TRM), codeine (COD), morphine (MOR), 6-acetylcodeine (6-AC), 6-monoacetylmorphine (6-MAM) and fentanyl (FNT) in hair samples by gas chromatography coupled to tandem mass spectrometry (GC–MS-MS) is presented. The MEPS used a mixed mode sorbent, and the steps for sample cleanup were conditioning (three cycles of 250 μL of methanol and three cycles of 250 μL formic acid 2%); sample load (15 cycles of 150 μL); wash (150 μL of 3.36% formic acid); and elution (eight cycles of 100 μL of ammonium hydroxide 2.36% (in methanol)). Linearity was obtained from the lower limit of quantitation (LLOQ) up to 5 ng/mg, with all target compounds revealing determination coefficients >0.99. The LLOQs achieved were 0.01 ng/mg for TRM, COD and 6-AC, and 0.025 ng/mg for MOR, 6-MAM and FNT. The recoveries ranged from 74 to 90% (TRM), 51 to 59% (COD), 22 to 36% (MOR), 69 to 99% (6-AC), 53 to 61% (6-MAM) and 75 to 86% (FNT). Precision and accuracy revealed coefficients of variation typically below 15% and relative errors within a ±15% interval, respectively. This new approach has proven to be an excellent alternative to classic procedures, reducing the volumes of organic solvents required.

Solvent Front Position Extraction with Semi-Automatic Device as a Powerful Sample Preparation Procedure Prior to Quantitative Instrumental Analysis

The new prototype device is applied to the Solvent Front Position Extraction (SFPE) sample preparation procedure. The mobile phase is deposited onto the chromatographic plate adsorbent layer by the pipette, which is moved, according to programmed movement path, by a 3D printer mechanism. The application of the prototype device to SFPE procedure leads to the increased repeatability of the results and significant reduction of the analysis time in comparison to the classical procedure of chromatogram development. Additionally, the new equipment allows use procedures that are not possible to run using the classic chromatogram development. In this paper, the results of manual and semi-automatic sample preparation with SFPE are compared and the possible application of this prototype device is discussed.

Imidazolium-based mesoporous organosilicas with bridging organic groups for microextraction by packed sorbent of phenoxy acid herbicides, polycyclic aromatic hydrocarbons and chlorophenols

The authors describe the preparation of two kinds of periodic mesoporous organosilicas (PMOs). The first kind is monofunctional and has a bridged alkyl imidazolium framework (PMO-IL). The other is a two-dimensional (2D) hexagonal bifunctional periodic mesoporous organosilica (BFPMO) with bridged IL-phenyl or -ethyl units. The CPMOs were utilized as highly sensitive and stable sorbents for microextraction by packed sorbent. The materials were characterized by SEM, TEM, FT-IR, and N₂ adsorption-desorption analysis. The adsorption capacities of the sorbents were investigated by using phenoxy acid herbicides as model analytes. The effects of bifunctionality and type of additional surface groups (phenyl or ethyl) on the efficiency of the extraction is emphasized. Three kinds of environmental contaminants, viz. phenoxy acid herbicides (CPAs), polycyclic aromatic hydrocarbons and chlorophenols were then studied with respect to their extraction by the sorbents. The interactions between the CPAs and the sorbents were evaluated by pH-changing processes to explore the interactions that play a major role. The selectivity of the sorbents was investigated by extraction of other types of analytes of with various polarity and charge. The BFPMOs display the typical good chemical stability of silica materials. The extraction properties are much better compared to commercial silicas. This is assumed to be due to the highly ordered mesoporous structures and the different types of probable interactions with analytes. The performance of the method was evaluated by extraction of CPAs as model analytes from aqueous samples, and quantification by GC with FID detection. Under optimized conditions, low limits of detection (0.1-0.5 μg.L^-1) and a wide linearity (0.5-200 μg.L^-1) were obtained. The method was applied to the trace analysis of CPAs in farm waters and rice samples. Graphical abstract Monofunctional periodic mesoporous organosilica with bridged alkyl imidazolium frameworks and bi-functional periodic mesoporous organosilica containing bridged ionic liquids and phenyl or -ethyl, have been successfully synthesized and utilized in microextractions by packed sorbent sorbents.

Microextraction by Packed Molecularly Imprinted Polymer Combined Ultra-High-Performance Liquid Chromatography for the Determination of Levofloxacin in Human Plasma

Fluoroquinolones are considered as gold standard for the prevention of bacterial infections. To improve assessment of antibacterial efficacy, a novel method for determination of levofloxacin was developed and validated. Deep eutectic solvents (DESs) as only green solvent were used as a porogen for preparation of water-compatible molecularly imprinted polymers (MIPs) with a pseudotemplate. The DESs-MIPs were characterized in detail, including scanning electron microscope, nitrogen sorption porosimetry, and Fourier transform-infrared spectra. Clearly, the maximum binding capacity of levofloxacin on DESs-MIPs in water and methanol was 0.216 and 0.077 μmol g−1, respectively. The DESs-MIPs as adsorbing materials were applied in microextraction by packed sorbent (MEPS), and the DESs-MIPs-MEPS conditions were optimized. The DESs-MIPs-MEPS coupled with ultra-high-performance liquid chromatography (UHPLC) was used to determine levofloxacin in human plasma. The method was found linear over 0.05–10 μg mL−1 with coefficient of correlation equal to 0.9988. The limit of detection and limit of quantification were 0.012 and 0.04 μg mL−1, respectively. At three spiked levels, the precision of proposed method was between 95.3% and 99.7% with intraday and interday relative standard deviations ≤8.9%. Finally, the developed method was used to examine levofloxacin from human plasma of 20 hospitalized patients after transrectal ultrasound-guided prostate biopsy, and the average concentration (±SD) of levofloxacin was 2.35 ± 0.99 μg mL−1 in plasma.

Simultaneous magnetic dispersive micro solid phase extraction of valsartan and atorvastatin using a CMC-coated Fe3O4 nanocomposite prior to HPLC-UV detection: multivariate optimization

In this study, a sensitive, rapid, accurate and practical procedure is established for determination of atorvastatin and valsartan from human biological fluids by dispersive micro solid phase extraction (D-μ-SPE) combined with HPLC-UV detector.

Current trends on microextraction by packed sorbent – fundamentals, application fields, innovative improvements and future applications

MEPS, the acronym of microextraction by packed sorbent, is a simple, fast and user- and environmentally-friendly miniaturization of the popular solid-phase extraction technique (SPE).

Reduced graphene oxide as an efficient sorbent in microextraction by packed sorbent: Determination of local anesthetics in human plasma and saliva samples utilizing liquid chromatography-tandem mass spectrometry

Herein, reduced graphene oxide (RGO) has been utilized as an efficient sorbent in microextraction by packed sorbent (MEPS). The combination of MEPS and liquid chromatography-tandem mass spectrometry has been used to develop a method for the extraction and determination of three local anesthetics (i.e. lidocaine, prilocaine, and ropivacaine) in human plasma and saliva samples. The results showed that the utilization of RGO in MEPS could minimize the matrix effect so that no interfering peaks at the retention times of the analytes or internal standard was observed. The high extraction efficiency of this method was approved by mean recoveries of 97.26-106.83% and 95.21-105.83% for the studied analytes in plasma and saliva samples, respectively. Intra- and inter-day accuracies and precisions for all analytes were in good accordance with the international regulations. The accuracy values (as percentage deviation from the nominal value) of the quality control samples were between -2.1 to 13.9 for lidocaine, -4.2 to 11.0 for prilocaine and between -4.5 to -2.4 for ropivacaine in plasma samples while the values were ranged from -4.6 to 1.6 for lidocaine, from -4.2 to 15.5 for prilocaine and from -3.3 to -2.3 for ropivacaine in human saliva samples. Lower and upper limit of quantification (LLOQ, ULOQ) were set at 5 and 2000 nmol L^-1 for all of the studied drugs. The correlation coefficients values were ≥0.995. The limit of detection values were obtained 4 nmol L^-1 for lidocaine and prilocaine, and 2 nmol L^-1 for ropivacaine.

Graphene particles supported on silica as sorbent for residue analysis of tetracyclines in milk employing microextraction by packed sorbent

This paper describes the use of graphene-based sorbents for determination of four tetracyclines in milk. The synthesized materials were combined with microextraction by packed sorbent (MEPS) to act as the sample preparation step. The extraction performance of these sorbents was compared to commercial phases, and graphene supported on silica provided the best results. The analytical method optimization was carried out by employing experimental design. Firstly, an evaluation of the experimental variables (elution solvent, use of EDTA, ionic force, and pH of the washing solution) was made by a 24-1 factorial experimental design. The variables sampling, washing and elution cycles of MEPS were further optimized under a full 23 experimental design. The validation parameters were determined under optimized conditions resulting in a linearity ranging from 15 to 110 μg/L with R2 values above 0.98, and LOQs ranging from 0.05 to 0.9 μg/L. The accuracy ranged from 87.9 to 118.4% and intra/inter-day precision reported by the RSDs were lower than 19%. The proposed and validated method was successfully applied to the analysis of 11 milk samples from different animals, revealing traces of tetracyclines in only two of them. This study focused on the evaluation of graphene-based sorbents combined with MEPS for tetracycline analysis provided equivalent or even better results than other proposed methods, suggesting being a sensitive, fast and reliable alternative method for the determination of tetracyclines in milk samples.