Export of microplastics from land to sea. A modelling approach

Extraction of Common Small Microplastics and Nanoplastics Embedded in Environmental Solid Matrices by Tetramethylammonium Hydroxide Digestion and Dichloromethane Dissolution for Py-GC-MS Determination

Determination of microplastics and nanoplastics (MNPs), especially small MPs and NPs (<150 μm), in solid environmental matrices is a challenging task due to the formation of stable aggregates between MNPs and natural colloids. Herein, a novel method for extracting small MPs and NPs embedded in soils/sediments/sludges has been developed by combining tetramethylammonium hydroxide (TMAH) digestion with dichloromethane (DCM) dissolution. The solid samples were digested with TMAH, and the collected precipitate was washed with anhydrous ethanol to eliminate the natural organic matter. Then, the MNPs in precipitate were extracted by dissolving in DCM under ultrasonic conditions. Under the optimized digestion and extraction conditions, the factors including sizes and concentrations of MNPs showed insignificant effects on the extraction process. The feasibility of this sample preparation method was verified by the satisfactory spiked recoveries (79.6-91.4%) of polystyrene, polyethylene, polypropylene, poly(methyl methacrylate), polyvinyl chloride, and polyethylene terephthalate MNPs in soil/sediment/sludge samples. The proposed sample preparation method was coupled with pyrolysis gas chromatography-mass spectrometry to determine trace small MPs and NPs with a relatively low detection limit of 2.3-29.2 μg/g. Notably, commonly used MNPs were successfully detected at levels of 4.6-51.4 μg/g in 6 soil/sediment/sludge samples. This proposed method is promising for evaluating small solid-embedded MNP pollution.

The Plastic Age: River Pollution in China from Crop Production and Urbanization

Many rivers are polluted with macro (>5 mm)- and microplastics (<5 mm). We assess plastic pollution in rivers from crop production and urbanization in 395 Chinese sub-basins. We develop and evaluate an integrated model (MARINA-Plastics model, China-1.0) that considers plastics in crop production (plastic films from mulching and greenhouses, diffuse sources), sewage systems (point sources), and mismanaged solid waste (diffuse source). Model results indicated that 716 kton of plastics entered Chinese rivers in 2015. Macroplastics in rivers account for 85% of the total amount of plastics (in mass). Around 71% of this total plastic is from about one-fifth of the basin area. These sub-basins are located in central and eastern China, and they are densely populated with intensive agricultural activities. Agricultural plastic films contribute 20% to plastics in Chinese rivers. Moreover, 65% of plastics are from mismanaged waste in urban and rural areas. Sewage is responsible for the majority of microplastics in rivers. Our study could support the design of plastic pollution control policies and thus contribute to green development in China and elsewhere.

River export of macro- and microplastics to seas by sources worldwide

Seas are polluted with macro- (>5 mm) and microplastics (<5 mm). However, few studies account for both types when modeling water quality, thus limiting our understanding of the origin (e.g., basins) and sources of plastics. In this work, we model riverine macro- and microplastic exports to seas to identify their main sources in over ten thousand basins. We estimate that rivers export approximately 0.5 million tons of plastics per year worldwide. Microplastics are dominant in almost 40% of the basins in Europe, North America and Oceania, because of sewage effluents. Approximately 80% of the global population live in river basins where macroplastics are dominant because of mismanaged solid waste. These basins include many African and Asian rivers. In 10% of the basins, macro- and microplastics in seas (as mass) are equally important because of high sewage effluents and mismanaged solid waste production. Our results could be useful to prioritize reduction policies for plastics.

Microplastics: a review of their impacts on different life forms and their removal methods

The pollution of microplastics (MPs) is a worldwide major concern, as they have become a major part of our food chain. MPs enter our ecosystem via different pathways, including anthropogenic activities and improper disposal of plastics. The aim of this article is to review the current scientific literature related to MPs and how they affect different life forms on earth. Briefly, MPs induced negative effects on humans are primarily linked with the oxidative stress and disruption in immunity. MPs not only affect the soil chemical and physical properties such as reduction in soil health and productivity but also impose harmful effects on soil microorganisms. Moreover, MP-induced plant growth reduction results from three complementary mechanisms: (i) reduction in root and shoot growth, (ii) reduction in photosynthesis accompanied by higher reactive oxygen species (ROS) production, and (iii) reduction in nutrient uptake via altered root growth. Given the negative effects of MPs on different life forms, it is important to remove or remediate them. We have discussed different MP removal methods including coagulation, membrane filtration technology, biochar, and biological degradation of MPs in soil and wastewater effluents. The use of ozone as ultrafiltration technique has also been shown as the most promising technique for MP removal. Finally, some future research recommendations are also put forward at the end to further enhance our understanding of the MPs induced negative effects on different life forms. The flowchart shows the interaction of MPs from water contaminated with MPs with different parts of the ecosystem and final interaction with human health.

Assessment of filter subsampling and extrapolation for quantifying microplastics in environmental samples using Raman spectroscopy

A common method for characterizing microplastics (MPs) involves capturing the plastic particles on a filter after extraction and isolation from the sediment particles. Microplastics captured on the filter are then scanned with Raman spectroscopy for polymer identification and quantification. However, scanning the whole filter manually using Raman analysis is a labor-intensive and time-consuming process. This study investigates a subsampling method for Raman spectroscopic analysis of microplastics (operationally defined here as 45-1000 μm in size) present in sediments and isolated onto laboratory filters. The method was evaluated using spiked MPs in deionized water and two environmentally contaminated sediments. Based on statistical analyses, we found quantification of a sub-fraction of 12.5 % of the filter in a wedge form was optimal, efficient, and accurate for estimating the entire filter count. The extrapolation method was then used to assess microplastic contamination in sediments from different marine regions of the United States.

Quantitative analysis and risk assessment to full-size microplastics pollution in the coastal marine waters of Hong Kong

Given the potential risk to the ecosystem, attention has increased in recent decades to the contamination of the aquatic environment by microplastics (MPs). Due to the limitations of conventional analysis methods of MPs, little is known about the size distribution and abundance of a full-size MPs from 1 μm to 5 mm. The present study quantified MPs with size ranges of 50 μm - 5 mm and 1-50 μm in the coastal marine waters from twelve locations in Hong Kong using fluorescence microscopy and flow cytometry respectively, during the end of wet (September 2021) and dry (March 2022) seasons. The average abundance of MPs with size ranges of 50 μm - 5 mm and 1-50 μm from twelve sampling locations marine surface waters were found ranging from 27 to 104 particles L^-1 and 43,675-387,901 particles L^-1 in the wet season respectively, and 13-36 particles L^-1 and 23,178-338,604 particles L^-1 in the dry season respectively. Significant temporal and spatial variations of small MPs abundance might be observed at the sampling locations, which were contributed by the influences of the estuary of Pearl River, sewage discharge points, land structure, and other anthropogenic activities. Based on the MPs abundance information, ecological risk assessment was conducted and revealed that the small MPs (< 10 μm) in coastal marine surface waters may pose potential health risks to aquatic organisms. Additional risk assessments are needed in order to determine whether or not the MPs exposure would cause health risks to the public.

Biodegradation of different types of microplastics: Molecular mechanism and degradation efficiency

Microplastics are widely distributed and a major pollutant in our ecosystem. Microplastics (MPs) are very small size plastic (<5 mm) present in environment, which comes from industrial, agricultural and household wastes. Plastic particles are more durable due to the presence of plasticizers and chemicals or additives. These plastics pollutants are more resistant to degradation. Inadequate recycling and excessive use of plastics lead to a large amount of waste accumulating in the terrestrial ecosystem, causing a risk to humans and animals. Thus, there is an urgent need to control microplastic pollution by employing different microorganisms to overcome this hazardous issue for the environment. Biological degradation depends upon different aspects, including chemical structure, functional group, molecular weight, crystallinity and additives. Molecular mechanisms for degradation of MPs through various enzymes have not extremely studied. It is necessary to degrade the MPs and overcome this problem. This review approaches different molecular mechanisms to degrade different types of microplastics and summarize the degradation efficiency of different types of bacteria, algae and fungal strains. The present study also summarizes the potential of microorganisms to degrade different polymers and the role of different enzymes in degradation of microplastics. To the outstanding of our awareness, this is the first article devoted to the role of microorganisms with their degradation efficiency. Furthermore, it also summarizes the role of intracellular and extracellular enzymes in biological degradation mechanism of microplastics.

Combined effects of salinity and polystyrene microplastics exposure on the Pacific oysters Crassostrea gigas: Oxidative stress and energy metabolism

Microplastics (MPs) pollution and salinity variation are two environmental stressors, but their combined effects on marine mollusks are rarely known. Oysters (Crassostrea gigas) were exposed to 1 × 10⁴ particles L^-1 spherical polystyrene MPs (PS-MPs) of different sizes (small polystyrene MPs (SPS-MPs): 6 μm, large polystyrene MPs (LPS-MPs): 50-60 μm) under three salinity levels (21, 26, and 31 psu) for 14 days. Results demonstrated that low salinity reduced PS-MPs uptake in oysters. Antagonistic interactions between PS-MPs and low salinity mainly occurred, and partial synergistic effects were mainly induced by SPS-MPs. SPS-MPs induced higher lipid peroxidation (LPO) levels than LPS-MPs. In digestive glands, low salinity decreased LPO levels and glycometabolism-related gene expression, which was related to salinity levels. Low salinity instead of MPs mainly affected metabolomics profiles of gills through energy metabolism and osmotic adjustment pathway. In conclusion, oysters can adapt to combined stressors through energy and antioxidative regulation.

Source, occurrence, distribution, fate, and implications of microplastic pollutants in freshwater on environment: A critical review and way forward

The generation of microplastics (MPs) has increased recently and become an emerging issue globally. Due to their long-term durability and capability of traveling between different habitats in air, water, and soil, MPs presence in freshwater ecosystem threatens the environment with respect to its quality, biotic life, and sustainability. Although many previous works have been undertaken on the MPs pollution in the marine system recently, none of the study has covered the scope of MPs pollution in the freshwater. To consolidate scattered knowledge in the literature body into one place, this work identifies the sources, fate, occurrence, transport pathways, and distribution of MPs pollution in the aquatic system with respect to their impacts on biotic life, degradation, and detection techniques. This article also discusses the environmental implications of MPs pollution in the freshwater ecosystems. Certain techniques for identifying MPs and their limitations in applications are presented. Through a literature survey of over 276 published articles (2000-2023), this study presents an overview of solutions to the MP pollution, while identifying research gaps in the body of knowledge for further work. It is conclusive from this review that the MPs exist in the freshwater due to an improper littering of plastic waste and its degradation into smaller particles. Approximately 15-51 trillion MP particles have accumulated in the oceans with their weight ranging between 93,000 and 236,000 metric ton (Mt), while about 19-23 Mt of plastic waste was released into rivers in 2016, which was projected to increase up to 53 Mt by 2030. A subsequent degradation of MPs in the aquatic environment results in the generation of NPs with size ranging from 1 to 1000 nm. It is expected that this work facilitates stakeholders to understand the multi-aspects of MPs pollution in the freshwater and recommends policy actions to implement sustainable solutions to this environmental problem.

Estimating Microplastics related to Laundry Wash and Personal Care Products released to Wastewater in Major Estonian Cities: a comparison of calculated and measured microplastics

Microplastics (MPs) research still at the budding stage in Estonia. A theoretical model build on substance flow analysis principles was developed. The goal of this study is to broaden understanding of MPs-types in wastewater and their contribution from known sources, quantify their presence based on model prediction and in-situ measurements. The authors estimate MPs from laundry wash (LW) and personal care products (PCPs)) in wastewater in Estonia. We found out that total estimated MPs load per capita from PCPs and LW in Estonia were between 4.25 - 12 tons/year, 3.52 - 11.24 tons / year respectively, and estimated load ended up in wastewater were between 700 - 30,000 kg/yr. and 2 - 1500 kg/yr. in WWTPs influent and effluent stream respectively. Finally. We conducted a comparison between estimated MPs load and on-site sample analysis and observed a medium-high level of MPs being discharged into the environment annually. During quantification and chemical characterization using µFTIR analysis, we found that microfibers with a length of 0.2-0.6 mm accounted for over 75% of the total MPs load in the effluent samples collected from four coastal WWTPs in Estonia. The estimation avails us broader overview about the theoretical MPs load in wastewater and gain valuable insight into developing process methods that prevent MPs accumulation in sewage sludge for safe application in agriculture.

Prevailing impacts of river management on microplastic transport in contrasting US streams: Rethinking global microplastic flux estimations

While microplastic inputs into rivers are assumed to be correlated with anthropogenic activities and to accumulate towards the sea, the impacts of water management on downstream microplastic transport are largely unexplored. A comparative study of microplastic abundance in Boulder Creek (BC), and its less urbanized tributary South Boulder Creek (SBC), (Colorado USA), characterized the downstream evolution of microplastics in surface water and sediments, evaluating the effects of urbanization and flow diversions on the up-to-downstream profiles of microplastic concentrations and loads. Water and sediment samples were collected from 21 locations along both rivers and microplastic properties determined by fluorescence microscopy and Raman spectroscopy. The degree of catchment urbanization affected microplastic patterns, as evidenced by greater water and sediment concentrations and loads in BC than the less densely populated SBC, which is consistent with the differences in the degree of urbanization between both catchments. Microplastic removal through flow diversions was quantified, showing that water diversions removed over 500 microplastic particles per second from the river, and caused stepwise reductions of downstream loads at diversion points. This redistribution of microplastics back into the catchment should be considered in large scale models quantifying plastic fate and transport to the oceans.

Quantification and characterization of microplastics in surface water samples from the Northeast Atlantic Ocean using laser direct infrared imaging

15 filtration samples were collected at eight locations onboard the RV Sonne (cruise SO279 in 2020) from 6 m water depth using a fractionated stainless-steel filtration unit. The size fraction > 300 μm was visually examined and potential microplastic particles were analyzed by ATR-FTIR spectroscopy. The treatment of size class 20 μm < d < 300 μm was based on enzymatic-oxidative microwave-assisted "one-pot" matrix digestion in conjunction with analysis of the microplastics by time-efficient LDIR imaging. Total number concentrations ranged from 47 to 2154 microplastic particles per m³ (average for all stations: 500 ± 700 microplastic particles m^-3 (1 SD; n = 8)). In total, 20 polymer types were identified. The most common polymer types were polyethylene terephthalate (20 %) and acrylates/polyurethane/varnish (15 %). 93 % of the detected microplastics were smaller than 100 μm in length. Analysis of sample replicates indicates high spatio-temporal variations in microplastic pollution within the investigated region.

Microplastics transport in a low-inflow estuary at the entrance of the Gulf of California

Microplastics (MPs) are recognized as a global emergent pollution impact, which can affect all food chains. Estimating MPs transport pathways in coastal ecosystems is needed to assess their likely effects. Here, we studied MPs accumulation and transport pathways in the Estero de Urias lagoon system (low-inflow estuary) using field data and a 3D particle model. Field results showed that the MPs present similar abundances throughout the study area during the dry and rainy seasons. Model simulations indicated that i) morphology and tidal currents caused the MPs discharged in the lagoon to remain inside, and ii) wind-induced currents caused the MPs in the coastal area to be transported to the southwest. These transport processes may be responsible for homogenizing MPs concentrations through the studied area. In addition, model simulations suggested that EUL-dense waters can export MPs from the coastal area to the sea bottom.

Biofilm-Colonized versus Virgin Black Microplastics to Accelerate the Photodegradation of Tetracycline in Aquatic Environments: Analysis of Underneath Mechanisms

Tire wear particles (TWPs) exposed to the aquatic environment are rapidly colonized by microorganisms and provide unique substrates for biofilm formation, which potentially serve as vectors for tetracycline (TC) to influence their behaviors and potential risks. To date, the photodegradation capacity of TWPs on contaminants due to biofilm formation has not been quantified. To accomplish this, we examined the ability of virgin TWPs (V-TWPs) and biofilm-developed TWPs (Bio-TWPs) to photodegrade TC when exposed to simulated sunlight irradiation. V-TWPs and Bio-TWPs accelerated the photodegradation of TC, with rates (k_obs) of 0.0232 ± 0.0014 and 0.0152 ± 0.0010 h^-1, respectively (k_obs increased by 2.5-3.7 times compared to that for only TC solution). An important factor of increased TC photodegradation behavior was identified and linked to the changed reactive oxygen species (ROS) of different TWPs. The V-TWPs were exposed to light for 48 h, resulting in more ROS for attacking TC, with hydroxyl radicals (^•OH) and superoxide anions (O₂^•-) playing a dominant role in TC photodegradation measured using scavenger/probe chemicals. This was primarily due to the greater photosensitization effects and higher electron-transfer capacity of V-TWPs in comparison to Bio-TWPs. In addition, this study first sheds light on the unique effect and intrinsic mechanism of the crucial role of Bio-TWPs in TC photodegradation, enhancing our holistic understanding of the environmental behavior of TWPs and the associated contaminants.

Microplastics pollution in freshwater fishes in the South of Italy: Characterization, distribution, and correlation with environmental pollutants

In this study, we investigated the presence, abundance, and chemical nature of microplastics (MPs) in the freshwater fish gastrointestinal tract in the South of Italy, and evaluated the possible correlation between MPs and environmental pollutants. Fifty specimens belonging to five species (Scardinius erythrophthalmus, Barbus barbus, Rutilus rubilio, Leuciscus cephalus, Salmo trutta), from twenty sites were collected. MPs chemical feature was identified by means of Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) and Raman microscopy. MPs were represented by 34.86 % fragments, film, and foam (all together MPs) and 65.14 % by fibers (MFs). The mean number of MPs/MFs per fish ranged from 6.25 ± 4.35 in R. rubilio and 2.26 ± 1.94 in B. barbus. The highest number of MPs/MFs per g of GIT was found in R. rubilio (9.07 ± 9.66), and the lowest in S. erythrophthalmus (0.75 ± 0.53). The highest number of MPs/MFs per fish species was found in L. cephalus (16), and the lowest in S. erythrophthalmus (4). Black predominated in every type of plastic debris identified, followed by blue and white, respectively for MFs and MPs. Polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS), and polypropylene (PP), were the main plastic polymers found. At fish sampling sites, comparing concentrations in soils of potentially toxic elements and persistent organic pollutants with the number of MPs/MFs in fish, a significant correlation was noted with polychlorinated biphenyls (PCBs) and, in particular, with PCB 105, PCB 118, PCB 156, PCB 157, and PCB 167. A strong correlation was also observed with all types of polycyclic aromatic hydrocarbon (PAHs) particularly with benzo(ghi)perylene, dibenz(a,h)anthracene, benzo(b)fluoranthene, benz(a)anthracene, benzo(a)pyrene, and pyrene. The results of this study would be useful to draft management and action plans, promote intervention plans aiming at removing threats to species and habitats, and address ways of renaturalization.

Global occurrence, drivers, and environmental risks of microplastics in marine environments

With an increasing quantity of plastic waste being discharged into the oceans, marine microplastic (MP) pollution has received widespread attention. However, the global occurrence characteristics, environmental risks, driving factors, and source-sink relationships remain unclear. In this study, we conducted a meta-analysis based on 165 articles about marine MP pollution. It was found that the global marine MP abundance displayed a significant spatial heterogeneity, and the distribution pattern was influenced by offshore distance, population density, and economic development. The morphological characteristics of MPs showed a significant difference between seawater and marine sediment, and small-size MPs (<1 mm) accounted for the majority of all MPs in the marine environment. The environmental risk assessment revealed that most of the marine MP pollution still remains at low concentrations in the global context, with the Polyurethane (PU), Polyacrylonitrile (PAN), and Polyvinyl chloride (PVC) types of MPs showing high environmental-risk contributions. In addition, land-based waste and marine operations, which were considered to be the dominant sources of marine MPs, primarily aggregated at nearshore submarine areas, in the water column, and in the deep-sea bottom environment. This study suggested that the combination of a meta-analysis and Monte Carlo simulation can provide much valuable information regarding the global occurrence characteristics and environmental risks of marine MPs.

Contamination from microplastics and other anthropogenic particles in the digestive tracts of the commercial species Engraulis encrasicolus and Sardina pilchardus

Fragments of microplastics (<5 mm) found in commercial species of fish, crustaceans, and bivalves, are an issue of global concern. The bioaccumulation of microplastics and other anthropogenic particles in different levels of the food web may provoke unwanted impacts on marine ecosystems and cause pernicious effects on human health. Here, we study the presence of anthropogenic particles and the fraction of microplastics in the target organs of two representative commercial fish species in Spain; the European anchovy (Engraulis encrasicolus) and the European pilchard (Sardina pilchardus). The individuals were sampled along the continental shelf of the Gulf of Cádiz, from the Bay of Cádiz to Cape Santa Maria. The isolation of the microplastics (MPs) was carried out with a complete alkaline-oxidant organic digestion (KOH-H₂O₂) of the digestive tract, including both the contents ingested and the muscle tissues. Anthropogenic particles were found in all individuals of both species with an average of 8.94 ± 5.11 items·ind^-1. Fibres made up 93 % of the items while fragments and films were represented by the remaining 7 %. The average size of the anthropogenic particles was 0.89 ± 0.82 mm. In addition to the fragment and film particles identified as microplastics, 29 % of the fibres were estimated to be microplastics by Fourier-transform infrared spectroscopy (FTIR) analysis. The main polymer found in both species was nylon. No significant correlation was found between the abundance and size of anthropogenic particles ingested and individual size or other body variables. The analysis of similarities (ANOSIM) and the distanced-based multiple linear regression model showed a high homogeneity in anthropogenic particle contamination in both species throughout the study area along the continental shelf of the Gulf of Cádiz.

Environmental and land use controls of microplastic pollution along the gravel-bed Ain River (France) and its "Plastic Valley"

Understanding microplastic particles (MPs) accumulation and transport along rivers represents a major task due to the complexity and heterogeneity of rivers, and their interactions with their wider corridor. The identification of MPs hotspots and their potential sources is especially challenging in coarse-bed rivers transporting a wide range of particle sizes with a high degree of variability in time and space. This research focuses on the gravel-bed Ain River (Rhône River tributary, France) which is managed by means of various dams and also hosts one of the major plastic production centres in Europe (Oyonnax and Bienne Plastic Valleys). In this research, (i) Geographical Information Systems (GIS) were used to locate plastic factories and to characterise the land use of the Ain River watershed. (ii) On the field, sediment samples were extracted from the hyporheic zone (HZ) of mobile gravel bar heads, while hydro-sedimentary settings were measured in order to describe site conditions. Sampling sites were especially established in downwelling areas (i.e. where the surface water entered the hyporheic zone), upstream and downstream of dams and plastic factories. (iii) After density separation and organic matter digestion of sediment, MPs were characterised with a µFTIR device followed by data processing via the siMPle software. This work highlighted the trapping efficiency of alluvial bars for MPs. The highest MPs concentrations were found along the Plastic Valleys (up to 4400 MPs/kg), while the lower river was less contaminated by MPs. After grain-size correction, a significant breakpoint was identified in the area of the main dams, revealing their major influence on MPs distribution. The variability in MPs concentrations and types suggested a local origin for most of MPs. A particular feature was the dominance of polypropylene (PP) which appears as a critical industrial heritage as the studied region is specialised in the manufacturing of hard plastics. Indeed, multivariate analyses also revealed that MPs concentrations and types were mostly driven by the vicinity of plastic factories and urban areas. This relationship between the land use, the presence of dams and MPs characteristics provides key results for the MPs assessment and the improvement of management issues along coarse-bed rivers.

Real-time variabilities in microplastic abundance and characteristics of urban surface runoff and sewer overflow in wet weather as impacted by land use and storm factors

Urban surface runoff (USR) and drainage system overflows during wet weather (WWF) play a key role in shaping water pollution. Particularly, the impact of large amounts of microplastic pollution on urban water bodies is unclear. We conducted an in-field investigation in six central urban drainage systems along Suzhou Creek in the Shanghai megacity of China and identified the impacts of storm factors and land use on the real-time dynamic changes in microplastic abundance and characteristics in USR and WWF. Microplastic abundances ranged from 228.3 ± 105.4-4969.51 ± 348.8, 309.3 ± 144.3-5195.8 ± 425.5, and 130.0 ± 30.0-8500.0 ± 1241.0 particles/L in the traffic and residential catchment USR, and the WWF, respectively. Under similar storm factor conditions, we observed correlations between environmental factors and microplastic abundance, especially the polymer type, verifying the significant role of land use. The microplastic abundance were 90.2 particles/L higher in the traffic catchment USR than in the residential catchment USR. Notably, we found unique microplastic polymers comprising ethylene vinyl acetate copolymer and thermoplastic elastomers in the residential and traffic catchment USR, respectively. However, land use had a minimum impact on the size and shape of microplastics: small-sized and film microplastics dominated in both USR types. We found statistical evidence of the widespread correlations between microplastic abundance and storm factors (accumulated storm depth and WWF flow) in both USR and WWF. The first flush phenomenon of microplastic dynamics was found in both USR and WWF. Microplastic characteristics also changed dynamically with storm time. With heavy storm factors, polypropylene and small-sized (<1 mm) microplastics in USR events increased and then decreased. This was also true for WWF events in granular and polyethylene terephthalate microplastics. Our results can facilitate the targeted mitigation of emerging pollutants to enhance stormwater management strategies and prevent future contamination.

Occurrence of microplastics in freshwater gastropods from a tropical river U-Taphao, southern Thailand

Background

Microplastics (MPs) are pollutants in rivers and marine environments. Rivers can be sources and sinks of MPs that enter the biota. Previous studies focusing on freshwater species are quite limited, especially for gastropods. Freshwater gastropods are essential to aquatic ecosystems because they are food to other aquatic animals, such as fish, shrimp, and crabs. They are a crucial link in the food chain between water resources and human food. Therefore, this study aimed to investigate MP accumulation in freshwater gastropods, commonly known as snails (Filopaludina sumatrensis speciosa and Pomacea canaliculata), in a river flowing into a shallow coastal lagoon.

Method

In this study, snail tissue samples were digested with 30% hydrogen peroxide. The mixture was heated at 60 °C for 24 h. MP particles were identified, counted, and characterized (shape, size, and color) by visual identification under a stereomicroscope. Furthermore, polymer-type identification was performed using Fourier transform infrared spectroscopy (FTIR). Analysis of variance (ANOVA) was applied for the statistical analysis.

Results

The MPs found were as follows: 4.76 particles/individual were found in F. sumatrensis speciosa upstream, 5.20 particles/individual were found in F. sumatrensis speciosa downstream, 7.28 particles/individual were found in P. canaliculata upstream, and 4.00 particles/individual were found in P. canaliculata downstream. It was found in the two-way ANOVA that the accumulation of MPs in gastropods was affected by species and study sites (upstream and downstream). There was a significant difference in the amount of MPs in P. canaliculata between upstream and downstream sites (p = 0.003). Fibers were the most common MPs in both species. Moreover, P. canaliculata upstream had the most significant amount of MPs. The smallest amount of MPs was recorded for P. canaliculata downstream, but there was great diversity in shape, size, and polymer type. MPs sized 500 μm^-1 mm were the most common in both species. Fourier transform infrared spectroscopy revealed six polymers: poly (ethylene terephthalate), polypropylene, rayon, polyethyleneimine, polyamine, and poly (propylene: ethylene). The occurrence of MPs in gastropods is alarming for food security in Thailand. The results of this study can be used to support baseline data on MP accumulation among freshwater gastropods.

The effects of riverside cities on microplastics in river water: A case study on the Southern Jiangsu Canal, China

Microplastics, which are usually recognized as artificial polymer particles with a particle size <5 mm, have attracted much attention as new pollutants in recent years. Urban areas are a major contributor of microplastics to the environment, but their microplastic emission intensity and characteristics are not clear. In this paper, the microplastic abundances and characteristics in the Southern Jiangsu Canal were studied to reveal the effect of riverside cities on microplastics in river water. The results show that the microplastic abundance in the water body of the South Jiangsu Canal ranges from 3.41 to 19.07 particles L^-1, with an average of 9.59 ± 3.95 particles L^-1, which is at the same level as major urban agglomerations in the world. The top five polymers were polyethylene terephthalate (PET), polycarbonate (PC), polyethylene (PE), chlorinated polyethylene (CPE) and polyurethane (PU). Fragments accounted for the largest proportion (68.47 %), followed by beads and fibers. Most microplastics were <100 μm (83.87 %). Human life and industry in riverside cities contribute significantly to microplastics in the Southern Jiangsu Canal water. After flowing through the cities, the microplastic abundance in the canal water increased by 26 % ~ 211 %. The overall economic and social development of the city affects the occurrence characteristics of the canal water microplastics. The average abundance of microplastics was positively correlated with Regional Gross Domestic Product (GDP) per capita. Wastewater treatment plant effluent is an important point source of microplastics in canal water. The microplastic abundances downstream of WWTPs increased by 21.8 % ~ 64.6 % compared with those upstream.

Microplastics in road dust: A practical guide for identification and characterisation

The contamination of the environment by microplastics (MPs) in road dust poses a serious ecological and health concern. MPs have been detected in road dust worldwide and their presence has been mainly attributed to plastic litter fragmentation and vehicle tyre abrasion. Although current technologies such as Raman and Fourier Transform InfraRed spectroscopy as well as Scanning Electron Microscopy are capable of detecting MPs in road dust, the analysis of MPs shape and MPs smaller than 20 μm is limited and often labour demanding. More accurate, cost-effective and rapid techniques have now become necessary to analyse MPs in road dust, particularly since the development of large infrastructure projects that incorporate recycled plastic into road assets and roadside furniture. Nile red (NR) staining is a promising technique to identify MPs in environmental samples; however, it has not yet been applied to road dust. This study investigates the use of NR fluorescence microscopy to detect MPs in road dust and provides information about MP amount, shape and size distribution. The staining duration and temperature, solvent selection and NR concentration were optimised considering 33 different road dust materials, including 13 types of plastic. The NR staining procedure developed in this work is capable of successfully differentiating between MPs down to 1 μm and other non-plastic road dust materials. Future applications include assessing the contribution of plastic-modified roads to MP pollution, comparing the level of MP pollution in urban and rural areas and providing a rapid, simple, inexpensive and reliable monitoring approach for further studies to compare MP using a singular optimised methodology.

The future of the Black Sea: More pollution in over half of the rivers

The population in the Black Sea region is expected to decline in the future. However, a better understanding of how river pollution is affected by declining trends in population and increasing trends in economic developments and urbanization is needed. This study aims to quantify future trends in point-source emissions of nutrients, microplastics, Cryptosporidium, and triclosan to 107 rivers draining into the Black Sea. We apply a multi-pollutant model for 2010, 2050, and 2100. In the future, over half of the rivers will be more polluted than in 2010. The population in 74 sub-basins may drop by over 25% in our economic scenario with poor wastewater treatment. Over two-thirds of the people will live in cities and the economy may grow 9-fold in the region. Advanced wastewater treatment could minimize trade-offs between economy and pollution: our Sustainability scenario projects a 68-98% decline in point-source pollution by 2100. Making this future reality will require coordinated international efforts.

Microplastics in urban freshwater streams in Adelaide, Australia: A source of plastic pollution in the Gulf St Vincent

The pollution of marine environments from plastic waste is anticipated to increase with current increases in plastic production. Reciprocally, escalating research efforts provide an improved understanding, monitoring, awareness, and mitigation of plastic contamination. Freshwater streams are recognised as one of the main contributors of microplastic pollution in marine environments. Presented here is the first investigation on the abundance of microplastic contamination (>20 μm and <5 mm) in freshwater streams in Adelaide, Australia. Composite samples were obtained from the sub-surface waters of eight freshwater streams (Magazine Wetland, Torrens River, Brownhill Creek, Sturt River, Field River, Christie Creek, Onkaparinga River and Pedler Creek), just before their connection to the Gulf St Vincent. Microplastics were found in all samples and microplastic abundance was 6.4 ± 5.5 particles.L^-1 across all streams, with significant variations. Microplastic abundances found in the freshwater streams of Adelaide were comparatively higher than those found in areas of similar urbanisation, likely due to the varying methodologies used across studies. This work provides evidence, for the first time, of the prevalence of microplastic contamination in the sub-surface waters of eight freshwater streams in metropolitan Adelaide. These findings reinforce the need for long-term and on-going monitoring of freshwater streams for plastic contamination. Furthermore, spatial and temporal monitoring will allow for the identification in changes to the abundances of microplastics discharging from these sources into the Gulf St Vincent and observe if abundances increase or decrease with any future targeted waste management efforts.

Effects of environmental and anthropogenic factors on the distribution and abundance of microplastics in freshwater ecosystems

Although microplastics are emerging marine pollutants that have recently attracted increasing attention, it is still difficult to identify their sources. This study reviewed 6487 articles to determine current research trends and found 237 effective concentration points after sorting, which were distributed in four regions and related to freshwater ecosystems. Results found that 15 environmental variables represented natural and anthropogenic environmental characteristics, of which seven environmental variables were selected for experimental modelling. Random forest models fitted sample data, thus facilitating the identification of regional microplastics distribution. The global random forest model had random forest importance scores (RFISs) for gross domestic product, population, and the proportion of agricultural land use were 15.76 %, 15.64 %, and 14.74 %, respectively; these indicate that human activities significantly affected the global distribution of microplastics. In Asia, agriculture and urban activities are the main sources of microplastics, with an RFIS of 11.58 % and 12.24 % for the proportion of agricultural and urban land use, respectively. Activities in urban areas were determined to be the main influencing factors in North America, with an RFIS of 13.92 % for the proportion of urban land use. Agricultural activities were the main influencing factors in Europe, with RFISs for the proportion of agricultural land use of 16.90 %. Our results indicate that region-specific policies are required to control microplastics in different regions, with soil composition being a latency factor that affects microplastics' distribution.

Review of research on migration, distribution, biological effects, and analytical methods of microfibers in the environment

Microplastics have been proven to be one of the critical environmental pollution issues. Moreover, microfibers, the most prominent form of microplastics in the environment, have likewise attracted the attention of various countries. With the increase in global population and industrialization, the production and use of fibers continue to increase yearly. As a result, a large number of microfibers are formed. If fiber products are not used or handled correctly, it will cause direct/indirect severe microfiber environmental pollution. Microfibers will be further broken into smaller fiber fragments when they enter the natural environment. Presently, researchers have conducted extensive research in the identification of microfibers, laying the foundation for further resourcefulness research. This work used bibliometric analysis to review the microfiber contamination researches systematically. First, the primary sources of microfibers and the influencing factors are analyzed. We aim to summarize the influence of the clothing fiber preparation and care processes on microfiber formation. Then, this work elaborated on the migration in/between water, atmosphere, and terrestrial environments. We also discussed the effects of microfiber on ecosystems. Finally, microfibers' current and foreseeable effective treatment, disposal, and resource utilization methods were explained. This paper will provide a structured reference for future microfiber research.

Satellite monitoring of terrestrial plastic waste

Plastic waste is a significant environmental pollutant that is difficult to monitor. We created a system of neural networks to analyze spectral, spatial, and temporal components of Sentinel-2 satellite data to identify terrestrial aggregations of waste. The system works at wide geographic scale, finding waste sites in twelve countries across Southeast Asia. We evaluated performance in Indonesia and detected 374 waste aggregations, more than double the number of sites found in public databases. The same system deployed in Southeast Asia identifies 996 subsequently confirmed waste sites. For each detected site, we algorithmically monitor waste site footprints through time and cross-reference other datasets to generate physical and social metadata. 19% of detected waste sites are located within 200 m of a waterway. Numerous sites sit directly on riverbanks, with high risk of ocean leakage.

Particulate plastics in drinking water and potential human health effects: Current knowledge for management of freshwater plastic materials in Africa

Plastic materials have contributed to the release of environmentally relevant particulate plastics which can be found almost everywhere and may be present in drinking water. Human exposure to these materials is diverse and our understanding of their internalization in the human body is incipient. This review discusses the state of knowledge of particulate plastics exposure in drinking water and the potential risks of adverse health in the human body. Particulate plastics have problematized water systems worldwide, and about 4,000,000 fine plastics may be ingested from drinking water annually by an individual. Testing methods for these materials in environmental media are presently inconsistent and standard protocols do not exist. Their potential ecotoxicological consequences are recognised to be linked to their physicochemical diversity, biological transpositions, and cytological tolerance in living organisms. It is observed that toxicological endpoints are varied and lack properly defined modes of action. In particular, fine particulate plastics have been observed to translocate into body tissues and cells where they are capable of provoking endocrine disruption, genetic mutations, and cancer responses. We propose a reclassification of particulate plastics to cater for their biological deposition and attributable risks of adverse health. Environmental management of particulate plastics in many developing countries is weak and their potential releases into drinking water have received limited research. Given that large populations are exposed to fresh surface water and plastic packaged drinking water worldwide, and that the risk assessment pathways are unvalidated at the moment, we argue for developing countries to increase their capacity for the environmental monitoring and circular management of plastic materials. Large-scale epidemiological cohort studies and surrogate assessment pathways are also recommended to provide a better understanding of the hazard characterization of particulate plastics exposure.

Microplastic in the Baltic Sea: A review of distribution processes, sources, analysis methods and regulatory policies

Microplastics pollution is an issue of great concern for scientists, governmental bodies, ecological organisations, and the general public. Microplastics pollution is widespread and is a great environmental problem on account of its potential toxicity for marine biota and human health. Today, almost all the world's seas and oceans are polluted with microplastics. The Baltic Sea is a semi-enclosed reservoir of brackish water and is a hotspot for contamination in terms of eutrophication and the presence of organic matter. Microplastics are quite intense, based on data from studies of marine litter and microplastics in the Baltic Sea. The number of microplastics in the Baltic Sea water is 0.07-3300 particles/m³, and in sediments 0-10179 particles/kg. These amounts prove that the waters and sediments of the Baltic Sea are heavily contaminated with microplastics. This article provides a comprehensive review of the microplastic origins and transport routes to the Baltic Sea. The data is presented as the concentration of microplastics in surface waters, sediments, and sea sand. The extraction methods used and the microplastics techniques are also presented. The possibilities and limitations of water and sediment sampling methods for microplastics determination were summarised, taking into account sampling tools, volume and depth. Extraction, separation, filtration, and visual sorting are outlined as sample preparation techniques for microplastic analysis. This review also focuses on the problems of obtaining data relevant to the development of the mathematical models necessary to monitor trends in the spread of microplastics in the Baltic Sea. Finally, several important laws and policies, which are in place in the Baltic States to control and manage microplastic pollution in the region, are highlighted.

Microplastics (MPs) in urban roadside snowbanks: Quantities, size fractions and dynamics of release

The microplastics (MP) pollution has been receiving high attention in recent years, because of the massive amounts of plastics it contributes to the environment. Tyre wear and road wear particles (TWP and RWPs) were identified as major sources of MPs, but the observed data on these particles in urban snow deposits and snowmelt is scarce. To contribute to remediation of this situation, a study designed to quantify TWPs and RWPs in urban roadside snowbanks, and assess the MP occurrence in three size fractions, was conducted in the Luleå and Umeå municipalities in Northern Sweden. TWPs and RWPs were determined in three size fractions: 50-100 μm, 100-300 μm, and ≥300 μm, and their release from melting snow was investigated in the laboratory under controlled conditions. Among the MPs identified in snow and the associated snowmelt samples, a majority consisted of both types of particles (T&RWPs) with an average of 20,000 ± 48,000 number/L, whereas other MPs (fibres, fragments, flakes, and films of plastic) were much less plentiful with an average concentration of 24 ± 16 number/L. The largest proportion of T&RWPs was detected in the size fraction 50-100 μm (around 80%), and the smallest proportion was in the fraction ≥300 μm (about 2%). Of the T&RWPs, about 85% were black bitumen particles (RWPs), composed of bitumen, mineral material and polymer modifiers, and 15% were tyre wear particles (TWPs) composed of rubber. The laboratory snow melting experiments demonstrated that urban snow stored MPs, which were eventually released during snowmelt. The ultimate fate of released MPs would depend on snowmelt drainage; it may either drain away from the road pavement and infiltrate into the ground, or enter the road gutter and be conveyed to storm sewers discharging to the receiving waters.

Effect of foliar and root exposure to polymethyl methacrylate microplastics on biochemistry, ultrastructure, and arsenic accumulation in Brassica campestris L

Despite the serious risk of microplastic pollution in the roots and leaves of crops, the phytotoxicity of microplastics (introduced via different exposure routes) in leafy vegetables remain insufficiently understood. Here, the effects of the root and foliar exposure of polymethyl methacrylate microplastic (PMMAMPs) on phytotoxicity, As accumulation, and subcellular distribution were investigated in rapeseed (Brassica campestris L). The relative chlorophyll content under PMMAMPs treatment decreased with time, and the 0.05 g L^-1 root exposure decreased it significantly (by 9.97-20.48%, P < 0.05). In addition, superoxide dismutase (SOD), catalase (CAT), glutathione reductase (GR), and ascorbate peroxidase (APX) activities in rapeseed were more sensitive to PMMAMPs introduced through root exposure than through foliar exposure. There was dose-dependent ultrastructural damage, and root exposure had a greater impact than foliar exposure on root tip cells and chloroplasts. PMMAMPs entered the shoots and roots of rapeseed through root exposure. Under foliar exposure, PMMAMPs promoted As accumulation in rapeseed by up to 75.6% in shoots and 68.2% in roots compared to that under control (CK). As content in cell wall under PMMAMP treatments was 3.6-5.3 times higher than that of CK, as indicated by subcellular component results. In general, root exposure to PMMAMPs resulted in a stronger physiological impact and foliar exposure led to increased As accumulation in rapeseed.

Tide-driven microplastics transport in an elongated semi-closed bay: A case study in Xiangshan Bay, China

Coastal bays are important containers for plastic wastes before they enter the ocean. Based on field samples, this study presents the main characteristics of microplastics and uses a numerical model to study the distribution and movement of microplastics as they are driven by tidal flows in an extended semi-closed bay in Xiangshan Bay, China. The laboratory analyses of microplastic samples from 27 pollutant source samples collected in three batches provided fundamental data on microplastics. Our results show that the local microplastics are prevalent (mean abundance: 890.6 ± 419.4 particles/m³) in the water. A higher quantity of fibre- and fragment-type microplastics was identified and compared to other plastic types. The detected microplastics varied in colour and composition. The simulation suggests that the bay can trap microplastics inside it, with only 16.92 % discharged into the open ocean. A series of single-source numerical tests at nine typical observation sites were conducted to examine tide-driven microplastic transport. Our results suggest that the release location is crucial to microplastic distribution. Specifically, the microplastics tended to accumulate near the bay mouth and the Tie inlet; the microplastics released from the north shore generally evacuated the bay more easily; and the inner harbour tended to accumulate microplastics during spring tide, as opposed to the departure of microplastics at the outer bay, while the effect was reversed during neap tide. We further considered the deposit effect, which significantly reduces the discharging rate to 0.04 % with a settling velocity of 0.05 mm/s. These results may have great importance to decision-making, management, and control of microplastic pollution.

How the Yangtze River transports microplastic to the east China sea

Land transportation in the Yangtze River basin is an important source of microplastics in the East China Sea, so it is significant to clarify the source, fate and river-sea transition of microplastics. Taking the Yangtze River as the study area, the interpolation method was used to analyze the monthly changes of the microplastic load in the estuary, the input-output model was used to estimate the flux of microplastics into the sea, and the inflow process of microplastics was studied through correlation analysis. The results showed that: (1) The load of microplastics in the Yangtze River estuary varied with season, reaching the maximum in October, with a monthly load of 3.91 Gg; (2) The total amount of microplastics entering the sea in the Yangtze River basin was higher than the medium level, which was 7.02 Gg. Among them, tributary input was the most important source, accounting for 62.9%. Non-point and point sources were further subdivided into 11 categories, with the largest proportion of microplastics generated during vehicle trip. Spatially speaking, the microplastics transported in the midstream accounted for the largest proportion, accounting for 55.56%; (3) microplastics had a strong correlation with COD and TP, indicating that the inflow process of microplastics was similar to that of traditional pollutants, which were river retention, wastewater treatment plant removal, water consumption removal and inflow to the East China Sea. Although the proportion of the last one was only 8.05%, the ecological risk was still not negligible due to the huge amount.

Microplastics in urban runoff: Global occurrence and fate

Public concerns on microplastic (MP) pollution and its prevalence in urban runoff have grown exponentially. Huge amounts of MPs are transported from urban environments via surface runoff to different environment compartments, including rivers, lakes, reservoirs, estuaries, and oceans. The global concentrations of MPs in urban runoff range from 0 to 8580 particles/L. Understanding the sources, abundance, composition and characteristics of MPs in urban runoff on a global scale is a critical challenge because of the existence of multiple sources and spatiotemporal heterogeneity. Additionally, dynamic processes in the mobilization, aging, fragmentation, transport, and retention of MPs in urban runoff have been largely overlooked. Furthermore, the MP flux through urban runoff into rivers, lakes and even oceans is largely unknown, which is very important for better understanding the fate and transport of MPs in urban environments. Here, we provide a critical review of the global occurrence, transport, retention process, and sinks of MPs in urban runoff. Relevant policies, regulations and measures are put forward. Future global investigations and mitigation efforts will require us to address this issue cautiously, cooperating globally, nationally and regionally, and acting locally.

Catalytic removal of attached tetrabromobisphenol A from microplastic surface by biochar activating oxidation and its impact on potential of disinfection by-products formation

There are numerous studies concerning the impacts of widespread microplastic pollution on the ecological environment, and it shows synergistic effect of microplastics and co-exposed pollutants in risk enhancement. However, the control methods for removing harmful pollutants from microplastic surface to reduce their ecological toxicity has rarely been explored. In this paper, magnetic graphitized biochar as a catalyst is shown to achieve 97% removal of tetrabromobisphenol A (TBBPA) from microplastics by biochar mediated electron transfer. The changes in the surface and structure of microplastics caused by various aging processes affected the pollutant attachment and subsequent removal efficiency. After chlorination, the highest disinfection by-product (DBP) generation potential was observed by the group of microplastics attached with TBBPA. The oxidation system of biochar activating peroxodisulfate (PDS) can not only reduce the kinds of DBPs, but also greatly reduce the total amount of detected DBPs by 76%, as well as reducing the overall toxicity. This paper highlights an overlooked contribution of pollutant attachment to the potential risks of DBP generated from natural microplastics during chlorination process, and provides the underlying insights to guide the design of a biochar-based catalyst from wastes to achieve the removal of TBBPA from microplastics and reduce the risks and hazards of co-contamination.

Quantifying microplastic stocks and flows in the urban agglomeration based on the mass balance model and source-pathway-receptor framework: Revealing the role of pollution sources, weather patterns, and environmental management practices

Microplastics are widely present in global ecosystems, threatening both marine and freshwater species. Given this problem, it is vital to research where land-based microplastics originate and how they are transmitted to receiving waters in urban agglomerations. Research results should inform systemic mitigation efforts to prevent future contamination. This study established the multi-directional transmission network of a microplastic mass balance system using a source-pathway-receptor framework, and involving annual source stocks and pathway flows with considerable variations under dry and wet weather patterns. Details of a baseline scenario quantifying the occurrence and spread of microplastics in an urban agglomeration were also determined in the context of current environmental management practices. We demonstrated that the total stock of the six major pollution sources amounted to 5317.7 ± 2175.3 and 3320.1 ± 953.6 tons/a in dry and wet weather, respectively; and 2347.8 ± 766.9 and 1991.8 ± 701.8 tons/a flows directly entered the sewer system and receiving water in Shanghai, China, respectively. Prominent microplastic stocks were found in atmospheric fallout, industrial wastewater, and domestic sewage. These stocks were much higher compared to crop farming wastewater, aquacultural wastewater, and livestock and poultry breeding wastewater. Total microplastic flows entering receiving water reached 3207.4 ± 1071.6 tons/a; the largest contributions were from wet weather overflow (23.7%), direct atmospheric fallout (21.7%), wastewater treatment plant effluent (14.2%), industrial wastewater (14.1%), and surface runoff (10.4%). Weather patterns led to divergent microplastic transmission pathways and mass flows, revealing a lagging timeline mode and illustrating the basic spatiotemporal features of microplastic contamination in urban agglomerations. Terminal disposal practices retained about two-fifths of the microplastic flows that would have otherwise been transmitted into receiving water. Of these, land surface sweep contributed half of the retained flow. Improvements in WWTP removal efficiency, storm sewage interception rate, industrial wastewater collection rate, and sewer sediment dredge rate could further enhance the systemic benefits.

Microplastic loads within riverine fishes and macroinvertebrates are not predictable from ecological or morphological characteristics

Microplastics are a relatively new but important form of freshwater contamination that can be ingested by a range of different species, with particle counts thought to be predictable from species ecology and morphology. Here, we report levels of microplastics in a 26 μm-5 mm size range within the macroinvertebrate and fish community of a lowland river (Dorset Stour, SW England), and test the hypothesis that counts are predictable from characteristics such as feeding guild, body length and trophic position. Macroinvertebrates (n = 257, 12 taxa) and fish (n = 418, 9 species) were collected from distinct river reaches by kick sampling and rod and line angling, respectively. Batches of whole macroinvertebrates and individual fish gastrointestinal tracts were digested with 30% hydrogen peroxide before microplastic screening and FTIR polymer confirmation on a particle subset. Particles were found in 40% of pooled macroinvertebrate batches (taxa incidences: 14-75%) and 39% of fishes (species incidences: 29-47%). Dominant particle feature categories were ≤100 μm, blue/green, fragments and fibres identified as various polyolefins. Although particle counts in macroinvertebrates were highest in Ephemeroptera (mean of 0.74 particles per individual), the relationships between particle loads, batch number and guild were all non-significant. In fishes, particle counts were not significantly related to species, stomach structure, feeding guild or body length, with spatial differences also not apparent across the catchment. Individual fish particle counts were similarly not significantly associated with their trophic positions (calculated from bulk δ¹⁵N values for a subset of fishes) and parasite load of Pomphorhynchus tereticollis. Correlations between fish and macroinvertebrate particle counts within specific river reaches were also not significant. In entirety, these results indicated although loadings of microplastic particles were relatively consistent within the two communities, they were not predictable from any of their ecological or morphological characteristics.

Phenotypic toxicity, oxidative response, and transcriptomic deregulation of the rotifer Brachionus plicatilis exposed to a toxic cocktail of tire-wear particle leachate

Tire-wear particles (TWPs) are potential source of microplastic (MP) pollution in marine environments. Although the hazardous effects of MPs on marine biota have received considerable attention, the toxicity of TWPs and associated leachates remain poorly understood. Here, to assess the toxicity of TWP leachate and the underlying mechanisms of toxicity, the phenotypic and transcriptomic responses of the rotifer Brachionus plicatilis were assessed with chemistry analysis of a TWP leachate. Although acute toxicity was induced, and a variety of metals and polyaromatic hydrocarbons were detected in the leachate, levels were below the threshold for acute toxicity. The results of particle analysis suggest that the acute toxicity observed in our study is the result of a toxic cocktail of micro- and/or nano-sized TWPs and other additives in TWP leachate. The adverse effects of TWP leachate were associated with differential expression of genes related to cellular processes, stress response, and impaired metabolism, with further oxidative stress responses. Our results imply that TWPs pose a greater threat to marine biota than other plastic particles as they constitute a major source of nano- and microplastics that have synergistic effects with the additives contained in TWP leachate.

Distinct microplastic patterns in the sediment and biota of an urban stream

Urban freshwaters, their sediments and resident biota are often highly susceptible to microplastic contamination from catchment-specific sources. Water velocity and spatiotemporal dynamics within the system can impact microplastic loads, while biological features may additionally impact levels within freshwater biota. Here, we investigated the spatiotemporal variations in microplastic loads collected from sediment, macroinvertebrate and fish samples from an urban watercourse (Bourne Stream) in Dorset, southwest England. Sediment particles were mostly fragments of colours (especially orange and purple) whereas microplastics in both macroinvertebrates and fishes were blue/green and fibres. Across all sample types, the dominant particle size class was ≤100 μm. Median (M) and range (R) of microplastic loads within each sample type were sediment: M = 0.06, R = 0-0.36 particles g^-1; macroinvertebrates: M = 0, R = 0-4 particles per batch; and fishes: M = 1, R = 0-6 particles per individual. Sediment loads varied spatially, with the highest load in the most upstream site, whereas biotic loads did not vary across space and time. Macroinvertebrate batch loadings varied between taxa and feeding guild, with counts significantly higher in annelids but lower in herbivores. Fish counts were higher in species with true, differentiated stomachs, but with the effects of species, feeding guild and body size being non-significant. Within sites, mean microplastic loads did not correlate between sediment, macroinvertebrate and fish samples. These results suggest that sediment freshwater microplastic loadings may vary spatially but that these trends are not reflected by, or correlated to, those in the biota where ingestion varies with biological traits. Assessments of freshwater microplastic contamination must therefore consider sampling spatiotemporally and across different biotic communities to fully understand the scale of contamination, and to subsequently undertake effective mitigation steps.

Method Development for Separation and Analysis of Tire and Road Wear Particles from Roadside Soil Samples

A comprehensive understanding of tire and road wear particles (TRWPs) and their detection and quantification in soils is still challenged by the lack of well-set standardized methods, inherent technological inconsistencies, and generalized protocols. Our protocol includes soil sampling, size separation, and organic matter removal by using hydrogen peroxide followed by density separation and analysis. In this context, roadside soil samples from different sites in Kansas and Ohio, USA, were collected and analyzed. Tire cryogrinds analogous to TRWPs were used to evaluate various density separation media, and collected particles more than 1 mm in size were then subjected to infrared spectroscopy (IR), thermogravimetric analysis (TGA), and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDX) to confirm TRWP presence. Particles smaller than 1 mm were Soxhlet extracted, followed by gas chromatography-mass spectrometry (GC-MS) to validate the presence of tire-related intermediates. SEM-EDX validated the presence of elemental combinations (S + Zn/Na) ± (Al, Ca, Mg, K, Si) attributed to tires. Ketones, carboxylic acids, epoxies, cyclohexane, and benzothiazole sulfenamide (BTS) intermediates were the most probable tire-related intermediates observed in the roadside soil samples. Thus, this simple, widely applicable, cost-effective sample preparation protocol for TRWP analysis can assist TRWP research advancement in terrestrial environments.

Characterization of biofilms formed on polystyrene microplastics (PS-MPs) on the shore of the Tuul River, Mongolia

Microplastic (MP) surfaces are common sites for microbial colonization and promote biofilm formation in aquatic environments, resulting in changes to the surface properties of MPs and their interaction with pollutants. Although the diversity of microbial communities adhering to MPs has been well documented in aquatic environments, surface changes in MPs due to microbial colonization are still poorly understood. In this study, we aimed to evaluate the variations in the chemical structure and components of biofilms on the surface of polystyrene microplastics (PS-MPs) collected from the shore of the Tuul River in Mongolia, using micro-Fourier transform infrared (micro-FTIR) spectroscopy. We applied a spectral subtraction approach, and the differences in spectra between peroxide-treated and untreated PS-MP particles enabled us to obtain the structural features of biofilms that developed on the plastic surface. In addition, the surface photooxidation status of the sampled PS-MPs was calculated from the subtracted spectra of peroxide-treated and pristine PS-MPs. Various functional groups of N-containing organic substances from bacterial and fungal communities were detected in the obtained biofilm spectra. Based on the spectral characteristics, biofilm spectra were classified into four groups by applying principal component analysis (PCA). A wide range of carbonyl indices (CIs: 0.00-1.40) was found in the subtracted spectra between peroxide-treated and pristine PS-MPs, revealing that different levels of surface oxidation progressed by physical influences such as solar radiation and freeze-thaw cycles. Furthermore, lignocellulose and silicate were found on the PS-MP surface as allochthonous attachments. Considering the variation in residence time of PS-MPs, they attract plant residues and mineral particles through the development of biofilms and travel together in the river environment. Given that the dynamic behavior of MPs can be greatly affected by changes in their surfaces, further studies are needed to emphasize their link to organic matter dynamics.

Huge quantities of microplastics are "hidden" in the sediment of China's largest urban lake-Tangxun Lake

Microplastics (MPs) pollution in Tangxun Lake, the largest urban lake in China, was investigated. The average MPs pollution in sediment (1.81 ± 1.75 × 10⁴ items kg^-1) is at a high level, while the MPs in lakeshore water (917.77 ± 742.17 items m^-3) is in the middle to low level compared with existing studies, which is related to the government's protection. Fragments and fibers are the most common shapes in sediment and water, respectively. MPs size <1 mm dominates in the sediment, while the MPs in water has a larger size. The distribution of MPs in the inner lake shows that pellets tend to "hidden" in sediments. Suspected MPs are randomly selected for polymer detection by Micro-Raman microscopy. Polypropylene (PP), polyethylene (PE) and polyethylene terephthalate (PET) are the most common polymer types in water, sediment and atmospheric deposition MPs samples. The input of wastewater, fishery and surrounding human activities are the main sources of MPs in sediment. Atmospheric deposition has a great impact on the distribution of MPs, while the contribution of surface runoff to lake MPs is not remarkable. In addition, MPs in sediments have exceeded the environmental carrying capacity. More attention should be focused on the sediment, where huge amounts of MPs are "hidden".

Wastewater treatment plants act as essential sources of microplastic formation in aquatic environments: A critical review

According to extensive in situ investigations, the microplastics (MPs) determined in current wastewater treatment plants (WWTPs) are mostly aged, with roughened surfaces and varied types of oxygen-containing functional groups (i.e., carbonyl and hydroxyl). However, the formation mechanism of aged MPs in WWTPs is still unclear. This paper systematically reviewed MP fragmentation and generation mechanisms in WWTPs at different treatment stages. The results highlight that MPs are prone to undergo physical abrasion, biofouling, and chemical oxidation-associated weathering in WWTPs at different treatment stages and can be further decomposed into smaller secondary MPs, including in nanoplastics (less than 1000 nm or 100 nm in size), suggesting that WWTPs can act as a formation source for MPs in aquatic environments. Sand associated mechanical crashes in the primary stage, microbes in active sewage sludge-related biodegradation in the secondary stage, and oxidant-relevant chemical oxidation processes (light photons, Cl₂, and O₃) in the tertiary stage are the dominant causes of MP formation in WWTPs. For MP formation mechanisms in WWTPs, external environmental forces (shear and stress forces, UV radiation, and biodegradation) can first induce plastic chain scission, destroy the plastic molecular arrangement, and create abundant pores and cracks on the MP surface. Then, the physicochemical properties (modulus of elasticity, tensile strength and elongation at break) of MPs shift consequently and finally breakdown into smaller secondary MPs or nanoscale plastics. Overall, this review provides new insights to better understand the formation mechanism, occurrence, fate, and adverse effects of aged microplastics/nanoplastics in current WWTPs.

Plastic in the air?! - Spider webs as spatial and temporal mirror for microplastics including tire wear particles in urban air

Studies concerning quantities of microplastics (MP) including tire wear particles (TWP) contamination in air samples are scarce. Spider webs have been suggested as a cheap and easily accessible biomonitor particularly for inorganic contaminates. Here, we emphasize the potential of spider webs to gain insights in the spatial and temporal trends of MP in urban air. The samples, collected in a mid-sized German city, were processed with Fentons reagent and measured using pyrolysis-gas chromatography-mass spectrometry for specific, polymer related indicator compounds. All samples contained TWP and other MP. The latter are detected and quantified as pyrolysis products of a polymer backbone. The results were expressed as clusters (prefix "C"). Determined polymer contaminations ranged from 11.4 μg/mg to 108 μg/mg spider web sample. The dominant polymer was C-PET (Ø 36.0% of total MP) derived most likely from textile fibers. Additionally, there was evidence for traffic-related contaminations. In particular car tire tread (Ø 40.8% of total MP) and ^⁎C-PVC (Ø 12.0% of total MP) were found, with the latter presumably originating from paint used for road markings. Truck tire tread, C-PE, C-PP, C-PS, C-PMMA, and C-PC were also frequently found, but in much lower abundance (Ø <6.4% of total MP). Differences in contamination levels could be plausibly related to the sampling locations.

Seasonal heterogeneity and a link to precipitation in the release of microplastic during COVID-19 outbreak from the Greater Jakarta area to Jakarta Bay, Indonesia

To reduce microplastic contamination in the environment, we need to better understand its sources and transit, especially from land to sea. This study examines microplastic contamination in Jakarta's nine river outlets. Microplastics were found in all sampling intervals and areas, ranging from 4.29 to 23.49 particles m^-3. The trend of microplastic contamination tends to increase as the anthropogenic activity towards Jakarta Bay from the eastern side of the bay. Our study found a link between rainfall and the abundance of microplastic particles in all river outlets studied. This investigation found polyethylene, polystyrene, and polypropylene in large proportion due to their widespread use in normal daily life and industrial applications. Our research observed an increase in microplastic fibers made of polypropylene over time. We suspect a relationship between COVID-19 PPE waste and microplastic shift in our study area. More research is needed to establish how and where microplastics enter rivers.

Occurrence of microplastics within a freshwater aquaculture system in the Pacific Islands, Viti Levu, Fiji

Microplastics (MPs) have become frequent topics of research within Pacific Islands (PIs) in recent years; however, within PI freshwater aquaculture systems, MPs have not yet been quantified. As such this study is aimed at quantifying and characterizing the MP load from across a freshwater aquaculture system within Fiji. Water, sediment, and fish samples were collected from various stages between water source and drainage channels of an aquaculture facility in Navua, Fiji. MPs were extracted using established protocols and analyzed for abundance, form type, size, and polymer composition. Results show no significant difference in MP abundance between sampling sites for, water (average: 3.2 ± 1.14 MP/L), sediment (average: 2.3 ± 0.7 MP/100 g DW), and fish (average: 2.7 ± 1.4 MP/fish). Fibers were the most frequent form type in all three elements (average: 2.9 ± 0.2 MP/L in water, 2.1 ± 0.75 MP/100 g DW, 2.8 ± 0.14 MP/fish); however, the difference across sites was significant within water samples only. In water and sediments, smaller MPs (< 1.4 mm) were the most frequent comprising > 35% in all three elements; however, the difference was not significant between sites. Polymer analysis found that polypropylene, polyurethane, and nylon were the most abundant polymers, which coupled with observed form type and size characteristics suggest a common sources of MPs across sites.

Deciphering the Mechanisms Shaping the Plastisphere Microbiota in Soil

The gradual accumulation of microplastics has aroused increasing concern for the unique niche, termed “plastisphere.” As research so far has focused on their characteristics in aquatic ecosystems, our understanding of the colonization and assembly of the attached bacterial communities on microplastics in soil ecosystems remains poor. Here, we aimed to characterize the plastisphere microbiomes of two types of microplastics (polylactic acid [PLA] and polyethylene [PE]) differing in their biodegradability in two different soils. After incubation for 60 days, considerably lower alpha diversity of bacterial community was observed on the microplastic surfaces, and prominent divergences occurred in the microbial community compositions between the plastisphere and the bulk soil. The temperature, rather than polymer type, significantly induced the differences between the plastisphere communities. The rRNA gene operon (rrn) copy numbers were significantly higher in the PLA plastisphere, suggesting potential degradation. The co-occurrence network analysis showed that the PE plastisphere exhibited greater network complexity and stronger stability than those in the PLA plastisphere. The stochasticity ratio indicated the remarkable importance of stochastic process on community assembly in PE and PLA plastispheres, while the null model analysis showed the nonnegligible roles of deterministic processes in shaping the plastisphere communities. Higher contributions of homogenous selection in the PLA plastisphere were observed in comparison with the PE plastisphere, which could probably be attributed to the selective pressure induced by microplastic degradation. Our findings enhance our mechanistic understanding of the diversity patterns and assembly processes of plastisphere in soil environments and have important implications for microbial ecology and microplastic risk assessment.

IMPORTANCE The increasing pervasive microplastic pollution is creating a new environmental compartment, termed plastisphere. Even though there was conclusive information characterizing the plastisphere, the underlying mechanisms shaping the bacterial communities in the plastisphere in the soil remain unclear. Therefore, we incubated two types of microplastics (PE and PLA) in two different soils and explored the differences between plastisphere and bulk soil communities. Additionally, the co-occurrence network and the assembly processes of plastisphere were subjected to further analysis. Our results highlight the importance of selective recruitment of microplastics and contribute to the understanding of the diversity patterns and assembly processes of plastisphere in soil environments.

Global transportation of plastics and microplastics: A critical review of pathways and influences

The rapid development of modern society has largely increased the usage of plastic. Concerns arise when vast amount of plastic waste has been generated and disposed. The accumulated evidences suggest that plastic waste in all the natural matrixes has become a global contaminant, principles such as geological and biogeochemical cycles for plastic pollution have been proposed. Before a full estimation of plastic mass flow, however, the pathways, directions and influences involved in plastic transportation are warranted to be addressed. We made this critical review based on the quantitative and narrative approaches in plastic and microplastic sources, sinks and transportation at global and historical scales. We also addressed the roles of anthropogenic influences in the global transportation of microplastic. The hydrological, meteorological, oceanic and even biological progresses naturally influence the plastic cycle and flow directions within the Earth's Four Spheres. Anthropogenic activities participated in all sections of plastic transportation, from sources to sinks. The contribution from anthropogenic activities remains unknown but several point sources including primary emissions and landfills have been confirmed. The primary outcomes point out that plastic pollution is highly complex issues in terms of natural and human-driven dynamics. We suggested that more efforts were needed in seeking the key sections in plastic transportation between environmental compartments at a global scale.