Fluorescence characteristics of 5-carboxytetramethylrhodamine linked covalently to the 5' end of oligonucleotides: multiple conformers of single-stranded and double-stranded dye-DNA complexes

Single-molecule tracking of mRNA exiting from RNA polymerase II

Single-pair fluorescence resonance energy transfer was used to track RNA exiting from RNA polymerase II (Pol II) in elongation complexes. Measuring the distance between the RNA 5' end and three known locations within the elongation complex allows us determine its position by means of triangulation. RNA leaves the polymerase active center cleft via the previously proposed exit tunnel and then disengages from the enzyme surface. When the RNA reaches lengths of 26 and 29 nt, its 5' end associates with Pol II at the base of the dock domain. Because the initiation factor TFIIB binds to the dock domain and exit tunnel, exiting RNA may prevent TFIIB reassociation during elongation. RNA further extends toward the linker connecting to the polymerase C-terminal repeat domain (CTD), which binds the 5'-capping enzyme and other RNA processing factors.

Probing DNA hybridization in homogeneous solution and at interfaces via measurement of the intrinsic fluorescence decay time of a single label

The hybridization of DNA oligomers including molecular beacons can be detected by measurement of either the decay time or the intensity of a single fluorescent label attached to the end of the respective oligonucleotide. The method works both in solution and solid phase and can distinguish between fully complementary and mismatch sequences as demonstrated for a 15-mer oligonucleotide and a 25-mer molecular beacon. The fluorescence lifetime method is advantageous in (a) requiring a single label (and therefore a single labeling step) only; and (b), being based on measurement of a self-referenced magnitude that is hardly affected by parameters such as fluctuations in light intensity that make measurement of intensity more prone to interferences.

Investigating the mechanism of the nucleocapsid protein chaperoning of the second strand transfer during HIV-1 DNA synthesis

Conversion of the human immunodeficiency virus type 1 (HIV-1) genomic RNA into the proviral DNA by reverse transcriptase involves two obligatory strand transfers that are chaperoned by the nucleocapsid protein (NC). The second strand transfer relies on the annealing of the (-) and (+) copies of the primer binding site, (-)PBS and (+) PBS, which fold into complementary stem-loops (SLs) with terminal single-stranded overhangs. To understand how NC chaperones their hybridization, we investigated the annealing kinetics of fluorescently labelled (+)PBS with various (-)PBS derivatives. In the absence of NC, the (+)/(-)PBS annealing was governed by a second-order pathway nucleated mainly by the single-stranded overhangs of the two PBS SLs. The annealing reaction appeared to be rate-limited by the melting of the stable G.C-rich stem subsequent to the formation of the partially annealed intermediate. A second pathway nucleated through the loops could be detected, but was very minor. NC(11-55), which consists primarily of the zinc finger domain, increased the (-)/(+) PBS annealing kinetics by about sixfold, by strongly activating the interaction between the PBS loops. NC(11-55) also activated (-)/(+) PBS annealing through the single-strand overhangs, but by a factor of only 2. Full-length NC(1-55) further increased the (-)/(+)PBS annealing kinetics by tenfold. The NC-promoted (-)/(+)PBS mechanism proved to be similar with extended (-)DNA molecules, suggesting that it is relevant in the context of proviral DNA synthesis. These findings favour the notion that the ubiquitous role of NC in the viral life-cycle probably relies on the ability of NC to chaperone nucleic acid hybridization via different mechanisms.

Orientational and Dynamical Heterogeneity of Rhodamine 6G Terminally Attached to a DNA Helix Revealed by NMR and Single-Molecule Fluorescence Spectroscopy

The comparison of Förster resonance energy transfer (FRET) efficiencies between two fluorophores covalently attached to a single protein or DNA molecule is an elegant approach for deducing information about their structural and dynamical heterogeneity. For a more detailed structural interpretation of single-molecule FRET assays, information about the positions as well as the dynamics of the dye labels attached to the biomolecule is important. In this work, Rhodamine 6G (2-[3'-(ethylamino)-6'-(ethylimino)-2',7'-dimethyl-6'H-xanthen-9'-yl]-benzoic acid) bound to the 5'-end of a 20 base pair long DNA duplex is investigated by both single-molecule multiparameter fluorescence detection (MFD) experiments and NMR spectroscopy. Rhodamine 6G is commonly employed in nucleic acid research as a FRET dye. MFD experiments directly reveal the equilibrium of the dye bound to DNA between three heterogeneous environments, which are characterized by distinct fluorescence lifetime and intensity distributions as a result of different guanine-dye excited-state electron transfer interactions. Sub-ensemble fluorescence autocorrelation analysis shows the highly dynamic character of the dye-DNA interactions ranging from nano- to milliseconds and species-specific triplet relaxation times. Two-dimensional NMR spectroscopy corroborates this information by the determination of the detailed geometric structures of the dye-nucleobase complex and their assignment to each population observed in the single-molecule fluorescence experiments. From both methods, a consistent and detailed molecular description of the structural and dynamical heterogeneity is obtained.

Structure of Rhodamine 6G−DNA Complexes from Molecular Dynamics Simulations

Chromophore-DNA complexes are useful for understanding charge transport along pi-stacks once their structural properties have been clarified. We studied two rhodamine 6G semicapping complexes with 15-mer B-DNA duplexes to determine the preferred orientation of the dye with respect to the neighboring base pair. For each of these systems, two distinct chromophore alignments were identified and quantified in terms of base-step parameters. The obtained geometries agree well with those derived from an NMR structure refinement of similar complexes. Cross-correlation analysis of the base-step parameters shows that slide and twist are highly interdependent during the structural transition from one conformation to the other.

Fluorescence Measurements of Duplex DNA Oligomers under Conditions Conducive for Forming M−DNA (a Metal−DNA Complex)

M-DNA (a metal complex of DNA with millimolar concentrations of Zn2+, Co2+, or Ni2+ and basic pH) has been proposed to undergo electron transfer over long distances along the helix and has generated interest as a potential building block for nanoelectronics. We show that DNA aggregates form under solvent conditions favorable for M-DNA (millimolar zinc and pH = 8.6) by fluorescence correlation spectroscopy. We have performed steady-state Förster resonance energy transfer (FRET) experiments with DNA oligomers conjugated with 6-carboxyfluorescein and tetramethylrhodamine to the opposite ends of double-stranded DNA (dsDNA) molecules. Enhanced acceptor emission is observed for distances larger than expected for identical DNA molecules with no zinc. To avoid intermolecular FRET, the fluorescently labeled dsDNA is diluted with a 100-fold excess of unlabeled dsDNA. The intramolecular FRET efficiency increases 25-fold for a 30-mer doubly labeled duplex DNA molecule upon addition of millimolar concentrations of zinc ions. Without zinc, this oligomer has less than 1% FRET efficiency. This dramatic increase in the FRET efficiency points to either significant changes in the Förster radius or fraying of the ends of the DNA helices. The latter hypothesis is supported by our experiments with a 9-mer that show dissociation of the duplex by zinc ions.

Dissecting and reducing the heterogeneity of excited-state energy transport in DNA-based photonic wires

Molecular photonic wires are one-dimensional representatives of a family of nanoscale molecular devices that transport excited-state energy over considerable distances in analogy to optical waveguides in the far-field. In particular, the design and synthesis of such complex supramolecular devices is challenging concerning the desired homogeneity of energy transport. On the other hand, novel optical techniques are available that permit direct investigation of heterogeneity by studying one device at a time. In this article, we describe our efforts to synthesize and study DNA-based molecular photonic wires that carry several chromophores arranged in an energetic downhill cascade and exploit fluorescence resonance energy transfer to convey excited-state energy. The focus of this work is to understand and control the heterogeneity of such complex systems, applying single-molecule fluorescence spectroscopy (SMFS) to dissect the different sources of heterogeneity, i.e., chemical heterogeneity and inhomogeneous broadening induced by the nanoenvironment. We demonstrate that the homogeneity of excited-state energy transport in DNA-based photonic wires is dramatically improved by immobilizing photonic wires in aqueous solution without perturbation by the surface. In addition, our study shows that the in situ construction of wire molecules, i.e., the stepwise hybridization of differently labeled oligonucleotides on glass cover slides, further decreases the observed heterogeneity in overall energy-transfer efficiency. The developed strategy enables efficient energy transfer between up to five chromophores in the majority of molecules investigated along a distance of approximately 14 nm. Finally, we used multiparameter SMFS to analyze the energy flow in photonic wires in more detail and to assign residual heterogeneity under optimized conditions in solution to different leakages and competing energy-transfer processes.

Global Tuning of Local Molecular Phenomena: An Alternative Approach to Bionanoelectronics

We have applied simultaneous horizontal and vertical bias to a single molecule (2 nm(2)) in an ordered and disordered matrix to virtually isolate and tune its property without taking it out physically from its environment. Using a dedicated electrode system, we have locally tuned nanoscale properties vertically by STM, while stabilizing its environment by applying a global electric field horizontally. Using this technique, we report tuning of molecular conformations in room temperature, whose evolution of states has been statistically investigated. We have also shown control on switching of a few selected conformations by applying dual bias simultaneously. As we avoid any direct injection of charge into the system via electrode contact, this technique could be used as a generalized method to tune phenomena evolved in an environment of weak interaction from a large distance without destroying the property.

Fluorescence anisotropy and FRET studies of G-quadruplex formation in presence of different cations

Results of the steady-state fluorescence, anisotropy and FRET measurements of G-quadruplex formation in the presence of selected cations (Li(+), Na(+), K(+), NEt(4)(+) and Mg(2+)) are reported. Three different fluorescent oligonucleotides with human telomeric sequence labeled with fluorescein (FAM) and tetramethylrhodamine (TAMRA) were investigated: a dual-labeled 21-mer denoted as PSO (Potassium Sensing Oligonucleotide) and two 5'- and 3'- single-labeled probes, FAM-21 and 21-TAMRA, respectively. The fluorescence signal of FAM-21 increased significantly for all systems and the fluorescence enhancement was comparable in magnitude for monovalent cations but it was more pronounced for Mg(2+) cation. This phenomenon was attributed to the protolytic equilibria of FAM affected by the variation in ionic strength. On the other hand, fluorescence of TAMRA was enhanced selectively by Na(I) cation that was explained by the dequenching of TAMRA emission originated from the peculiarity of the basket-type structure of Na(I)-quadruplex. Anisotropy of FAM-21 (but not 21-TAMRA) appeared to be sensitive to the G-quadruplex formation, showing significant increase with an increase in cation concentration and indicating some restrictions in rotational depolarization of FAM. FRET experiments revealed that all tested cations caused quenching of FAM fluorescence in PSO, but only Na(+) and K(+) ions produced sensitized emission of TAMRA acceptor. Higher FRET efficiency observed in the presence of sodium ion was attributed to the specific spectral factor and steric interactions in the basket-type Na(I)-quadruplex.

Analytical potential of the quadruplex DNA-based FRET probes

DNA exhibits structural flexibility and may adopt also tetraplex structures known as guanine-quadruplexes or G-quadruplexes. These G-quadruplexes have recently received great attention because G-rich sequences are often found in genome and because of their potential links to mechanisms that relate to cancer, HIV, and other diseases. The unique structure of quadruplexes has also stimulated development of new analytical and bioanalytical assays based on fluorescence resonance energy transfer (FRET). Intramolecular folding of a flexible single-stranded DNA molecule into a compact G-quadruplex is a structural transition leading to closer proximity of its 5'- and 3'-ends. Thus, labeling both ends of a DNA strand with donor and acceptor fluorophores enables monitoring the quadruplex formation process by means of the FRET signal. This review shows how FRET technique contributes to G-quadruplex research and focuses mainly on analytical applications of FRET-labeled quadruplexes. Applications include studies of structural transitions of quadruplexes, FRET-based selection of ligands that bind to quadruplexes, design of molecular probes for protein recognition and development of sensors for detection of potassium ions in aqueous solution.

The DNA-binding domain of the ultraspiracle drives deformation of the response element whereas the DNA-binding domain of the ecdysone receptor is responsible for a slight additional change of the preformed structure

Ecdysteroids control molting and metamorphosis in insects via a heterodimeric complex of two nuclear receptors, the ecdysone receptor (EcR) and ultraspiracle protein (Usp). We used fluorescence resonance energy transfer (FRET) to study the topology of the natural pseudopalindromic element from the hsp27 gene (hsp27pal) in complex with the DNA-binding domains of Usp and EcR (UspDBD and EcRDBD, respectively). Steady-state data revealed shortening of the end-to-end distance of the hsp27pal-derived probe. For the 70.8 +/- 0.6 A distance obtained for the UspDBD-complexed DNA a bend of about 23.1 +/- 2.9 degrees was measured. Nearly the same value (23.0 +/- 3.4 degrees) was obtained for the DNA complexed with the UspDBD/EcRDBD heterodimer. The respective bend angles estimated using fluorescence decay measurements were 19.0 +/- 2.1 degrees and 20.9 +/- 3.6 degrees . Thus, the FRET data suggest for the first time that the UspDBD defines the architecture of the UspDBD/EcRDBD heterocomplex due to the significant deformation of the hsp27pal. This suggestion has been further reinforced using gel retardation experiments, which, in conjunction with high-resolution DNase I footprinting, indicate that the main contribution to the observed bend is given by the UspDBD itself, while binding of the EcRDBD molecule brings on a slight additional change of the preformed structure.

Pyrrolo-C as a fluorescent probe for monitoring RNA secondary structure formation

Pyrrolo-C (PC), or 3-[beta-D-2-ribofuranosyl]-6-methylpyrrolo[2,3-d]pyrimidin-2(3H)-one, is a fluorescent analog of the nucleoside cytidine that retains its Watson-Crick base-pairing capacity with G. Due to its red-shifted absorbance, it can be selectively excited in the presence of natural nucleosides, making it a potential site-specific probe for RNA structure and dynamics. Similar to 2-aminopurine nucleoside, which base-pairs with uridine (or thymidine), PC's fluorescence becomes reversibly quenched upon base-pairing, most likely due to stacking interactions with neighboring bases. To test its utility as an RNA probe, we examined PC's fluorescent properties over a wide range of ionic strengths, pH, organic cosolvents, and temperatures. Incorporation of PC into a single-stranded RNA results in an approximately 60% reduction of fluorescence intensity, while duplex formation reduces the fluorescence by approximately 75% relative to the free ribonucleoside. We find that the fluorescence intensity of PC is only moderately affected by ionic strength, pH, and temperature, while it is slightly enhanced by organic cosolvents, making it a versatile probe for a broad range of buffer conditions. We demonstrate two applications for PC: fluorescent measurements of the kinetics of formation and dissociation of an RNA/DNA complex, and fluorescent monitoring of the thermal denaturation of the central segment of an RNA duplex. Taken together, our data showcase the potential of pyrrolo-C as an effective fluorescent probe to study RNA structure, dynamics, and function, complementary to the popular 2-aminopurine ribonucleoside.

Specificity in DNA recognition by a peptide from papillomavirus E2 protein

The E2 proteins of papillomavirus specifically bind to double-stranded DNA containing the consensus sequence ACCG-N4-CGGT, where N is any nucleotide. Here, we show the binding and recognition of dissimilar DNA sequences by an 18 amino-acid peptide (alpha1E2), which corresponds to the DNA-recognition helix, alpha-helix-1. Isothermal DNA binding assays performed with the DNA consensus sequence show saturable curves with alpha1E2 peptide, and the alpha1E2 peptide is converted to an ordered conformation upon complexation. Measurements performed with non-specific DNA sequence fail to saturate, a behavior characteristic of non-specific binding. Binding of the alpha1E2 peptide to these DNA sequences display a different counter-ion dependence, indicating a dissimilar, sequence-dependent mechanism of interaction. Quantitative stoichiometric measurements revealed the specificity in alpha1E2 peptide recognition of the ACCG half-site, demonstrating capacity for discrimination of nucleic acid bases sequences without the need of a whole protein architecture.

Fluorescence resonance energy transfer (FRET) for DNA biosensors: FRET pairs and Förster distances for various dye-DNA conjugates

Fluorescence resonance energy transfer (FRET) between the extrinsic dye labels Cyanine 3 (Cy3), Cyanine 5 (Cy5), Carboxytetramethyl Rhodamine (TAMRA), Iowa Black Fluorescence Quencher (IabFQ), and Iowa Black RQ (IabRQ) has been studied. The Förster distances for these FRET-pairs in single- and double-stranded DNA conjugates have been determined. In particular, it should be noted that the quantum yield of the donors Cy3 and TAMRA varies between single- and double-stranded DNA. While this alters the Förster distance for a donor-acceptor pair, this also allows for detection of thermal denaturation events with a single non-intercalating fluorophore. The utility of FRET in the development of nucleic acid biosensor technology is illustrated by using TAMRA and IabRQ as a FRET pair in selectivity experiments. The differential quenching of TAMRA fluorescence by IabRQ in solution has been used to discriminate between 0 and 3 base pair mismatches at 60 degrees C for a 19 base sequence. At room temperature, the quenching of TAMRA fluorescence was not an effective indicator of the degree of base pair mismatch. There appears to be a threshold of duplex stability at room temperature which occurs beyond two base pair mismatches and reverses the observed trend in TAMRA fluorescence prior to that degree of mismatch. When this experimental system is transferred to a glass surface through covalent coupling and organosilane chemistry, the observed trend in TAMRA fluorescence at room temperature is similar to that obtained in bulk solution, but without a threshold of duplex stability. In addition to quenching of fluorescence by FRET, it is believed that several other quenching mechanisms are occurring at the surface.

Measurements of internal distance changes of the 30S ribosome using FRET with multiple donor-acceptor pairs: quantitative spectroscopic methods

We present analytical and experimental procedures for determining distance changes within the 30 S subunit of the Escherichia coli ribosome using Förster resonance energy transfer (FRET). We discuss ways to contend with complexities when using FRET to measure distance changes within large multi-subunit macromolecular complexes, such as the ribosome. Complications can arise due to non-stoichiometric labeling of donor and acceptor probes, as well as environmental effects that are specific to each conjugation site. We show how to account for changes in extinction coefficients, quenching, labeling stoichiometry and other variations in the spectroscopic properties of the dye to enable more accurate calculation of distances from FRET data. We also discuss approximations that concern the orientation of the transition moments of the two dye molecules, as well as the impact of other errors in the measurement of absolute distances. Thirteen dye-pair locations with different distances using 18 independent FRET pairs conjugated to specific 30 S protein residues have been used to determine distance changes within the 30 S subunit upon association with the 50 S subunit, forming the 70 S ribosome. Here, we explain the spectroscopic methods we have used, which should be of general interest in studies that aim at obtaining quantitative distance information from FRET.

Nanoparticle energy transfer on the cell surface

Membrane topology of receptors plays an important role in shaping transmembrane signalling of cells. Among the methods used for characterizing receptor clusters, fluorescence resonance energy transfer between a donor and acceptor fluorophore plays a unique role based on its capability of detecting molecular level (2-10 nm) proximities of receptors in physiological conditions. Recent development of biotechnology has made possible the usage of colloidal gold particles in a large size range for specific labelling of cells for the purposes of electron microscopy. However, by combining metal and fluorophore labelling of cells, the versatility of metal-fluorophore interactions opens the way for new applications by detecting the presence of the metal particles by the methods of fluorescence spectroscopy. An outstanding feature of the metal nanoparticle-fluorophore interaction is that the metal particle can enhance spontaneous emission of the fluorophore in a distance-dependent fashion, in an interaction range essentially determined by the size of the nanoparticle. In our work enhanced fluorescence of rhodamine and cyanine dyes was observed in the vicinity of immunogold nanoparticles on the surface of JY cells in a flow cytometer. The dyes and the immunogold were targetted to the cell surface receptors MHCI, MHCII, transferrin receptor and CD45 by monoclonal antibodies. The fluorescence enhancement was sensitive to the wavelength of the exciting light, the size and amount of surface bound gold beads, as well as the fluorophore-nanoparticle distance. The intensity of 90 degrees scattering of the incident light beam was enhanced by the immunogold in a concentration and size-dependent fashion. The 90 degrees light scattering varied with the wavelength of the incident light in a manner characteristic to gold nanoparticles of the applied sizes. A reduction in photobleaching time constant of the cyanine dye was observed in the vicinity of gold particles in a digital imaging microscope. Modulations of 90 degrees light scattering intensity and photobleaching time constant indicate the role of the local field in the fluorescence enhancement. A mathematical simulation based on the electrodynamic theory of fluorescence enhancement showed a consistency between the measured enhancement values, the inter-epitope distances and the quantum yields. The feasibility of realizing proximity sensors operating at distance ranges larger than that of the conventional Forster transfer is demonstrated on the surface of living cells.

Detection of receptor trimers on the cell surface by flow cytometric fluorescence energy homotransfer measurements

Fluorescence energy homotransfer offers a powerful tool for the investigation of the state of oligomerization of cell surface receptors on a cell-by-cell basis by measuring the polarized components of fluorescence intensity of cells labeled with fluorescently stained antibodies. Here we describe homotransfer-based methods for the flow cytometric detection and analysis of hetero- and homo-associations of cell surface receptors. Homotransfer efficiencies for two- and three-body energy transfer interactions are defined and their frequency distribution curves are computed from the fluorescence anisotropy distributions of multiple-labeled cells. The fractions of receptors involved in homo-clustering is calculated based on the dependence of the fluorescence anisotropy on the surface concentration of the fluorescently stained antibodies. A homotransfer analysis of the homo- and hetero-clustering of the MHCI and MHCII glycoproteins, the cytokine receptor IL-2Ralpha, transferrin receptor and the receptor-type tyrosine phosphatase CD45 on JY B and Kit-225-K6 T cells is presented. We investigated how various factors such as the type of dye, rotational mobility of the dye and dye-targeting antibody, as well as the wavelength of the exciting light affect the homotransfer. We show that the homotransfer technique combined with the high statistical resolution of flow cytometry is an effective tool for detecting different oligomeric states of receptors by using fluorophores having restricted rotational mobility on the time scale of fluorescence.

The origins of high-affinity enzyme binding to an extrahelical DNA base

Base flipping is a highly conserved strategy used by enzymes to gain catalytic access to DNA bases that would otherwise be sequestered in the duplex structure. A classic example is the DNA repair enzyme uracil DNA glycosylase (UDG) which recognizes and excises unwanted uracil bases from DNA using a flipping mechanism. Previous work has suggested that enzymatic base flipping begins with dynamic breathing motions of the enzyme-bound DNA substrate, and then, only very late during the reaction trajectory do strong specific interactions with the extrahelical uracil occur. Here we report that UDG kinetically and thermodynamically prefers substrate sites where the uracil is paired with an unnatural adenine analogue that lacks any Watson-Crick hydrogen-bonding groups. The magnitude of the preference is a striking 43000-fold as compared to an adenine analogue that forms three H-bonds. Transient kinetic and fluorescence measurements suggest that preferential recognition of uracil in the context of a series of incrementally destabilized base pairs arises from two distinct effects: weak or absent hydrogen bonding, which thermodynamically assists extrusion, and, most importantly, increased flexibility of the site which facilitates DNA bending during base flipping. A coupled, stepwise reaction coordinate is implicated in which DNA bending precedes base pair rupture and flipping.

Orientational dynamics and dye-DNA interactions in a dye-labeled DNA aptamer

We report the picosecond and nanosecond timescale rotational dynamics of a dye-labeled DNA oligonucleotide or "aptamer" designed to bind specifically to immunoglobulin E. Rotational dynamics in combination with fluorescence lifetime measurements provide information about dye-DNA interactions. Comparison of Texas Red (TR), fluorescein, and tetramethylrhodamine (TAMRA)-labeled aptamers reveals surprising differences with significant implications for biophysical studies employing such conjugates. Time-resolved anisotropy studies demonstrate that the TR- and TAMRA-aptamer anisotropy decays are dominated by the overall rotation of the aptamer, whereas the fluorescein-aptamer anisotropy decay displays a subnanosecond rotational correlation time much shorter than that expected for the overall rotation of the aptamer. Docking and molecular dynamics simulations suggest that the low mobility of TR is a result of binding in the groove of the DNA helix. Additionally, associated anisotropy analysis of the TAMRA-aptamer reveals both quenched and unquenched states that experience significant coupling to the DNA motion. Therefore, quenching of TAMRA by guanosine must depend on the configuration of the dye bound to the DNA. The strong coupling of TR to the rotational dynamics of the DNA aptamer, together with the absence of quenching of its fluorescence by DNA, makes it a good probe of DNA orientational dynamics. The understanding of the nature of dye-DNA interactions provides the basis for the development of bioconjugates optimized for specific biophysical measurements and is important for the sensitivity of anisotropy-based DNA-protein interaction studies employing such conjugates.

Accurate FRET measurements within single diffusing biomolecules using alternating-laser excitation

Fluorescence resonance energy transfer (FRET) between a donor (D) and an acceptor (A) at the single-molecule level currently provides qualitative information about distance, and quantitative information about kinetics of distance changes. Here, we used the sorting ability of confocal microscopy equipped with alternating-laser excitation (ALEX) to measure accurate FRET efficiencies and distances from single molecules, using corrections that account for cross-talk terms that contaminate the FRET-induced signal, and for differences in the detection efficiency and quantum yield of the probes. ALEX yields accurate FRET independent of instrumental factors, such as excitation intensity or detector alignment. Using DNA fragments, we showed that ALEX-based distances agree well with predictions from a cylindrical model of DNA; ALEX-based distances fit better to theory than distances obtained at the ensemble level. Distance measurements within transcription complexes agreed well with ensemble-FRET measurements, and with structural models based on ensemble-FRET and x-ray crystallography. ALEX can benefit structural analysis of biomolecules, especially when such molecules are inaccessible to conventional structural methods due to heterogeneity or transient nature.

The Effect of Nucleobase-Specific Fluorescence Quenching on In Situ Hybridization with rRNA-Targeted Oligonucleotide Probes

Oligonucleotide probes labeled with fluorescent dyes are used in a variety of in situ applications to detect specific DNA or RNA molecules. It has been described that probe fluorescence might be quenched upon hybridization in a sequence specific way. Here, a set of 17 oligonuleotides labeled with 6-carboxyfluorescein was used to examine the relevance of nucleotide specific quenching for fluorescence in situ hybridization (FISH) to whole fixed bacterial cells. Probes quenched upon hybridization to a guanine-rich region of purified RNA in solution were not quenched upon FISH. Among other factors the high protein concentration within cells may prevent quenching of probe fluorescence in situ.

Spectroscopic characterization of fluorescein- and tetramethylrhodamine-labeled oligonucleotides and their complexes with a DNA template

We measured absorption and emission spectra, fluorescence quantum yield, anisotropy, fluorescence resonance energy transfer (FRET), and melting temperature to characterize fluorescein- and tetramethylrhodamine (TMR)-labeled oligonucleotides in solution and when hybridized to a common DNA template. Upon hybridization to the template, both the absorption and emission spectra of TMR-labeled duplexes exhibited a shift with respect to those of labeled oligonucleotides, depending on the location of the TMR on the oligonucleotide. Measurements of quantum yield, anisotropy, and melting temperature indicated that TMR interacted with nucleotides within the duplexes in the order (T1>T5>T11, T16) that the oligonucleotide with TMR labeled at the 5' end (T1) is stronger than that labeled at position 5 from the 5' end (T5), which is also stronger than those labeled at the positions, 11 and 16, from the 5' end (T11, T16). In the case of the duplex formed between T1 and the template, fluorescence quenching was observed, which is attributed to the interaction between the dye molecule and guanosines located at the single-stranded portion of the template. A two-state model was suggested to describe the conformational states of TMR in the duplex. The melting temperatures of the four FRET complexes show the same pattern as those of TMR-labeled duplexes. We infer that the interactions between TMR and guanosine persist in the FRET complexes. This interaction may bring the donor and the acceptor molecules closely together, which could cause interaction between the two dye molecules shown in absorbance measurements of the FRET complexes.

Simultaneous DNA Binding, Bending, and Base Flipping

We measured the kinetics of DNA bending by M.EcoRI using DNA labeled at both 5'-ends and observed changes in fluorescence resonance energy transfer. Although known to bend its cognate DNA site, energy transfer is decreased upon enzyme binding. This unanticipated effect is shown to be robust because we observe the identical decrease with different dye pairs, when the dye pairs are placed on the respective 3'-ends, the effect is cofactor- and protein-dependent, and the effect is observed with duplexes ranging from 14 through 17 base pairs. The same labeled DNA shows the anticipated increased energy transfer with EcoRV endonuclease, which also bends this sequence, and no change in energy transfer with EcoRI endonuclease, which leaves this sequence unbent. We interpret these results as evidence for an increased end-to-end distance resulting from M.EcoRI binding, mediated by a mechanism novel for DNA methyltransferases, combining DNA bending and an overall expansion of the DNA duplex. The M.EcoRI protein sequence is poorly accommodated into well defined classes of DNA methyltransferases, both at the level of individual motifs and overall alignment. Interestingly, M.EcoRI has an intercalation motif observed in the FPG DNA glycosylase family of repair enzymes. Enzyme-dependent changes in anisotropy and fluorescence resonance energy transfer have similar rate constants, which are similar to the previously determined rate constant for base flipping; thus, the three processes are nearly coincidental. Similar fluorescence resonance energy transfer experiments following AdoMet-dependent catalysis show that the unbending transition determines the steady state product release kinetics.

Role of the structure of the top half of HIV-1 cTAR DNA on the nucleic acid destabilizing activity of the nucleocapsid protein NCp7

The viral nucleic acid chaperone protein NCp7 of HIV-1 assists the two obligatory strand transfers required for the conversion of the genomic RNA into double-stranded DNA by reverse transcriptase. The first strand transfer necessitates the annealing of the early product of cDNA synthesis, the minus strand strong stop DNA (ss-cDNA) to the 3' end of the genomic RNA. The hybridization reaction involves regions containing imperfect stem-loop (SL) structures, namely the TAR RNA at the 3' end of the genomic RNA and the complementary sequence cTAR at the 3' end of ss-cDNA. To pursue the characterization of the interaction between NCp7 and cTAR DNA, we investigated by absorbance, steady-state and time-resolved fluorescence spectroscopy, the interaction of NCp7 with wild-type and mutated DNAs representing the top half of cTAR. NCp7 was found to activate the transient melting of this cTAR DNA structure but less efficiently than that of cTAR lower half. The NCp7-induced destabilization of cTAR top half is dependent upon the three nucleotides bulging out of the stem, which thus represent a melting initiation site. In contrast, despite its ability to bind NCp7, the top loop does not play any significant role in NCp7-mediated melting. Thermodynamic data further suggest that NCp7-mediated destabilization of this cTAR structure correlates with the free energy changes afforded by destabilizing motifs like loops and bulges within the SL secondary structure. Interestingly, since NCp7 melts only short double-stranded sequences, destabilizing motifs need to be regularly positioned along the genomic sequence in order to promote strand transfer and thus genetic recombination during proviral DNA synthesis.

Simultaneous DNA Binding and Bending by EcoRV Endonuclease Observed by Real-Time Fluorescence†

The complete catalytic cycle of EcoRV endonuclease has been observed by combining fluorescence anisotropy with fluorescence resonance energy transfer (FRET) measurements. Binding, bending, and cleavage of substrate oligonucleotides were monitored in real time by rhodamine-x anisotropy and by FRET between rhodamine and fluorescein dyes attached to opposite ends of a 14-mer DNA duplex. For the cognate GATATC site binding and bending are found to be nearly simultaneous, with association and bending rate constants of (1.45-1.6) x 10(8) M(-1) s(-1). On the basis of the measurement of k(off) by a substrate-trapping approach, the equilibrium dissociation constant of the enzyme-DNA complex in the presence of inhibitory calcium ions was calculated as 3.7 x 10(-12) M from the kinetic constants. Further, the entire DNA cleavage reaction can be observed in the presence of catalytic Mg(2+) ions. These measurements reveal that the binding and bending steps occur at equivalent rates in the presence of either Mg(2+) or Ca(2+), while a slow decrease in fluorescence intensity following bending corresponds to k(cat), which is limited by the cleavage and product dissociation steps. Measurement of k(on) and k(off) in the absence of divalent metals shows that the DNA binding affinity is decreased by 5000-fold to 1.4 x 10(-8) M, and no bending could be detected in this case. Together with crystallographic studies, these data suggest a model for the induced-fit conformational change in which the role of divalent metal ions is to stabilize the sharply bent DNA in an orientation suitable for accessing the catalytic transition state.

An actin-dependent conformational change in myosin

Conformational changes within myosin lead to its movement relative to an actin filament. Several crystal structures exist for myosin bound to various nucleotides, but none with bound actin. Therefore, the effect of actin on the structure of myosin is poorly understood. Here we show that the swing of smooth muscle myosin lever arm requires both ADP and actin. This is the first direct observation that a conformation of myosin is dependent on actin. Conformational changes within myosin were monitored using fluorescence resonance energy transfer techniques. A cysteine-reactive probe is site-specifically labeled on a 'cysteine-light' myosin variant, in which the native reactive cysteines were removed and a cysteine engineered at a desired position. Using this construct, we show that the actin-dependent ADP swing causes an 18 A change in distance between a probe on the 25/50 kDa loop on the catalytic domain and a probe on the regulatory light chain, corresponding to a 23 degrees swing of the light-chain domain.

Fluorescence resonance energy transfer over approximately 130 basepairs in hyperstable lac repressor-DNA loops

Lac repressor (LacI) binds two operator DNA sites, looping the intervening DNA. DNA molecules containing two lac operators bracketing a sequence-directed bend were previously shown to form hyperstable LacI-looped complexes. Biochemical studies suggested that orienting the operators outward relative to the bend direction (in construct 9C14) stabilizes a positively supercoiled closed form, with a V-shaped LacI, but that the most stable loop construct (11C12) is a more open form. Here, fluorescence resonance energy transfer (FRET) is measured on DNA loops, between fluorescein and TAMRA attached near the two operators, approximately 130 basepairs apart. For 9C14, efficient LacI-induced energy transfer ( approximately 74% based on donor quenching) confirms that the designed DNA shape can force the looped complex into a closed form. From enhanced acceptor emission, correcting for observed donor-dependent quenching of acceptor fluorescence, approximately 52% transfer was observed. Time-resolved FRET suggests that this complex exists in both closed- and open form populations. Less efficient transfer, approximately 10%, was detected for DNA-LacI sandwiches and 11C12-LacI, consistent with an open form loop. This demonstration of long-range FRET in large DNA loops confirms that appropriate DNA design can control loop geometry. LacI flexibility may allow it to maintain looping with other proteins bound or under different intracellular conditions.

Principles and biophysical applications of lanthanide-based probes

Using luminescent lanthanides, instead of conventional fluorophores, as donor molecules in resonance energy transfer measurements offers many technical advantages and opens up a wide range of new applications. Advantages include farther measurable distances ( approximately 100 A) with greater accuracy, insensitivity to incomplete labeling, and the ability to use generic relatively large labels, when necessary. Applications highlighted include the study of ion channels in living cells, protein-protein interaction in cells, DNA-protein complexes, and high-throughput screening assays to measure peptide dimerization associated with DNA transcription factors and ligand-receptor interactions.

Elucidating a key intermediate in homologous DNA strand exchange: structural characterization of the RecA-triple-stranded DNA complex using fluorescence resonance energy transfer

The RecA protein of Escherichia coli plays essential roles in homologous recombination and restarting stalled DNA replication forks. In vitro, the protein mediates DNA strand exchange between single-stranded (ssDNA) and homologous double-stranded DNA (dsDNA) molecules that serves as a model system for the in vivo processes. To date, no high-resolution structure of the key intermediate, comprised of three DNA strands simultaneously bound to a RecA filament (RecA-tsDNA complex), has been reported. We present a systematic characterization of the helical geometries of the three DNA strands of the RecA-tsDNA complex using fluorescence resonance energy transfer (FRET) under physiologically relevant solution conditions. FRET donor and acceptor dyes were used to label different DNA strands, and the interfluorophore distances were inferred from energy transfer efficiencies measured as a function of the base-pair separation between the two dyes. The energy transfer efficiencies were first measured on a control RecA-dsDNA complex, and the calculated helical parameters (h approximately 5 A, Omega(h) approximately 20 degrees ) were consistent with structural conclusions derived from electron microscopy (EM) and other classic biochemical methods. Measurements of the helical parameters for the RecA-tsDNA complex revealed that all three DNA strands adopt extended and unwound conformations similar to those of RecA-bound dsDNA. The structural data are consistent with the hypothesis that this complex is a late, post-strand-exchange intermediate with the outgoing strand shifted by about three base-pairs with respect to its registry with the incoming and complementary strands. Furthermore, the bases of the incoming and complementary strands are displaced away from the helix axis toward the minor groove of the heteroduplex, and the bases of the outgoing strand lie in the major groove of the heteroduplex. We present a model for the strand exchange intermediate in which homologous contacts preceding strand exchange arise in the minor groove of the substrate dsDNA.

The stretched DNA geometry of recombination and repair nucleoprotein filaments

The RecA protein of Escherichia coli plays essential roles in homologous recombination and restarting stalled DNA replication forks. In vitro, the protein mediates DNA strand exchange between single-stranded (ssDNA) and homologous double-stranded DNA (dsDNA) molecules that serves as a model system for the in vivo processes. To date, no high-resolution structure of the key intermediate, comprised of three DNA strands simultaneously bound to a RecA filament (RecA x tsDNA complex), has been elucidated by classical methods. Here we review the systematic characterization of the helical geometries of the three DNA strands of the RecA x tsDNA complex using fluorescence resonance energy transfer (FRET) under physiologically relevant solution conditions. Measurements of the helical parameters for the RecA x tsDNA complex are consistent with the hypothesis that this complex is a late, poststrand-exchange intermediate with the outgoing strand shifted by about three base pairs with respect to its registry with the incoming and complementary strands. All three strands in the RecA x tsDNA complex adopt extended and unwound conformations similar to those of RecA-bound ssDNA and dsDNA.

R150A mutant of F TraI relaxase domain: reduced affinity and specificity for single-stranded DNA and altered fluorescence anisotropy of a bound labeled oligonucleotide

F factor TraI is a helicase and a single-stranded DNA nuclease ("relaxase") essential for conjugative DNA transfer. A TraI domain containing relaxase activity, TraI36, was generated previously. Substituting Ala for Arg150 (R150A) of TraI36 reduces in vitro relaxase activity. The mutant has reduced affinity, relative to wild type, for a 3'-TAMRA-labeled 22-base single-stranded oligonucleotide. While both R150A and wild-type TraI36 bind oligonucleotide, only wild type increases steady-state fluorescence anisotropy of the labeled 22-base oligonucleotide upon binding. In contrast, binding by either protein increases steady-state anisotropy of a 3'-TAMRA-labeled 17-base oligonucleotide. Time-resolved intensity data for both oligonucleotides, bound and unbound, require three lifetimes for adequate fits, at least one more than the fluorophore alone. The preexponential amplitude for the longest lifetime increases upon binding. Time-resolved anisotropy data for both oligonucleotides, bound and unbound, require two rotational correlation times for adequate fits. The longer correlation time increases upon protein binding. Correlation times for the protein-bound 17-base oligonucleotide are similar for both proteins, with the longer correlation time in the range of molecular tumbling of the protein-DNA complex. In contrast, protein binding causes less dramatic increases in correlation times for the 22-base oligonucleotide relative to the 17-base oligonucleotide. Binding studies indicate that R150 contributes to recognition of bases immediately 3' to the DNA cleavage site, consistent with the apparent proximity of R150 and the 3' oligonucleotide end. Models in which the R150A substitution alters single-stranded DNA flexibility at the oligonucleotide 3' end or affects fluorophore-DNA or fluorophore-protein interactions are discussed.

Effect of primary and secondary structure of oligodeoxyribonucleotides on the fluorescent properties of conjugated dyes

We studied fluorescence intensity, polarization and lifetime of some commonly used fluorophores conjugated to oligodeoxyribonucleotides with different primary and secondary structures. We found that fluorescence intensity can increase or decrease upon hybridization of the labeled strand to its complement depending on the sequence and position of the fluorophore. Up to 10-fold quenching of the fluorescence upon hybridization was observed when the dye moiety was attached close to the 3' end and the 3'-terminal base was either dG or dC. No quenching upon hybridization was observed when the dye was positioned within the same sequence context but close to the 5' end. The presence of a dG overhang quenches the fluorescence less efficiently than a blunt end dG-dC or dC-dG base pair. When located internally in the double strand, the dG-dC base pair does not affect the fluorescence of the nearby dye. Guanosine in a single-stranded oligonucleotide quenches the fluorescence of nearby dye by <2-fold. Upon duplex formation, this quenching is eliminated and the fluorescence increases. This increase can only be detected when the fluorophore is located at least 6 nt from the terminal dG-dC base pair. The change of fluorescence polarization upon duplex formation inversely correlates with the change of intensity. Fluorescein conjugated to a single-stranded oligonucleotide or a duplex undergoes a bi-exponential decay with approximately 4 and approximately 1 ns lifetimes.

HIV-1 nucleocapsid protein activates transient melting of least stable parts of the secondary structure of TAR and its complementary sequence

The nucleocapsid protein NCp7 of HIV-1 possesses a nucleic acid chaperone activity that is critical in minus and plus strand transfer during reverse transcription. The minus strand transfer notably relies on the ability of NCp7 to destabilize the stable stem with five contiguous, double-stranded segments of both the TAR sequence at the 3' end of the viral genome and the complementary sequence, cTAR, in minus strong-stop DNA. In order to examine the nature and the extent of NCp7 destabilizing activity, we investigated, by absorbance and fluorescence spectroscopy, the interaction of TAR and cTAR with a (12-55)NCp7 peptide containing the zinc-finger motifs but lacking the ability to aggregate the oligonucleotides. The absorbance changes in the UV band of cTAR show that seven to eight base-pairs, on average, are melted per oligonucleotide at a ratio of one peptide to 7.5 nucleotides. In contrast, the melting of TAR does not exceed an average of one base-pair per oligonucleotide. This may be linked to the greater stability of TAR, since a strong correlation between NCp7 destabilizing effect and oligonucleotide stability was observed. The effect of (12-55)NCp7 on the stem terminus was investigated by using a cTAR molecule doubly labeled at the 3' and 5' ends by a donor/acceptor couple. In the absence of the peptide, about 80 % of the oligonucleotides are in a dark non-fluorescent state, having a close proximity of the two dyes. The remaining 20 % are distributed between three fluorescent species, having either the terminal segment, the two terminal segments or all segments of the stem melted. This is in line with a fraying mechanism wherein the stem terminus fluctuates rapidly between open and closed states. Addition of (12-55)NCp7 shifts the equilibrium toward the open species, suggesting that NC enhances fraying of the stem terminus. Taken together, our data suggest that NCp7 activates the transient opening of base-pairs in the least stable parts of the stem. Also, this activity of NCp7 was found to be dependent on the zinc-finger motifs, since no melting was observed with a fingerless NCp7 peptide.

DNA-binding interactions and conformational fluctuations of Tc3 transposase DNA binding domain examined with single molecule fluorescence spectroscopy

The fluorescent dye tetramethylrhodamine (TMR) was conjugated to a synthetic peptide containing the sequence-specific DNA binding domain of Tc3 transposase. Steady-state and single molecule fluorescence spectroscopy was used to investigate protein conformational fluctuations and the thermodynamics of binding interactions. Evidence is presented to show that the TMR-Tc3 conjugate exists in at least two conformational states. The most stable conformation is one in which the TMR fluorescence is quenched. Upon binding to DNA, the total fluorescence from TMR-Tc3 increases by three- to fourfold. Single molecule measurements of TMR-Tc3 bound to DNA shows that this complex also fluctuates between a fluorescent and quenched form. The fluorescent form of the conjugate is stabilized when bound to DNA, and this accounts for part of the increase in total fluorescence. In addition, the inherent photodynamics of the dye itself is also altered (e.g., fluorescent lifetime or triplet yield) in such a way that the total fluorescence from the conjugate bound to DNA is enhanced relative to the unbound form.

Fluorescence resonance energy transfer studies of U-shaped DNA molecules

Fluorescence resonance energy transfer studies allow to determine global shape properties of nucleic acids and nucleoprotein complexes. In many DNA-protein complexes, the DNA is more or less bent and the degree of bending can be obtained by FRET. For example, the DNA in complex with the integration host factor (IHF) is kinked by approximately 160 degrees building a U-shaped structure. The two DNA helix ends come close to one another in space in a distance range easily measurable by FRET. The global DNA structure of this complex can be mimicked by introducing two regions with unpaired bases ('bulges') into the DNA each producing a sharp kink of approximately 80 degrees. These U-shaped DNA constructs were used to measure the electrostatic interaction of the two nearly parallel negatively charged DNA helix arms. The electrostatic repulsion between the helix arms, and as a consequence their distance, decreases with growing salt concentration of mono- or divalent cations. This experimental approach also allows the sensitive study of the local structure of DNA sequences positioned between the two bulges.

Fluorescence resonance energy transfer (FRET) and competing processes in donor-acceptor substituted DNA strands: a comparative study of ensemble and single-molecule data

We studied the fluorescence resonance energy transfer (FRET) efficiency of different donor-acceptor labeled model DNA systems in aqueous solution from ensemble measurements and at the single molecule level. The donor dyes: tetramethylrhodamine (TMR); rhodamine 6G (R6G); and a carbocyanine dye (Cy3) were covalently attached to the 5'-end of a 40-mer model oligonucleotide. The acceptor dyes, a carbocyanine dye (Cy5), and a rhodamine derivative (JA133) were attached at modified thymidine bases in the complementary DNA strand with donor-acceptor distances of 5, 15, 25 and 35 DNA-bases, respectively. Anisotropy measurements demonstrate that none of the dyes can be observed as a free rotor; especially in the 5-bp constructs the dyes exhibit relatively high anisotropy values. Nevertheless, the dyes change their conformation with respect to the oligonucleotide on a slower time scale in the millisecond range. This results in a dynamic inhomogeneous distribution of donor/acceptor (D/A) distances and orientations. FRET efficiencies have been calculated from donor and acceptor fluorescence intensity as well as from time-resolved fluorescence measurements of the donor fluorescence decay. Dependent on the D/A pair and distance, additional strong fluorescence quenching of the donor is observed, which simulates lower FRET efficiencies at short distances and higher efficiencies at longer distances. On the other hand, spFRET measurements revealed subpopulations that exhibit the expected FRET efficiency, even at short D/A distances. In addition, the measured acceptor fluorescence intensities and lifetimes also partly show fluorescence quenching effects independent of the excitation wavelength, i.e. either directly excited or via FRET. These effects strongly depend on the D/A distance and the dyes used, respectively. The obtained data demonstrate that besides dimerization at short D/A distances, an electron transfer process between the acceptor Cy5 and rhodamine donors has to be taken into account. To explain deviations from FRET theory even at larger D/A distances, we suggest that the pi-stack of the DNA double helix mediates electron transfer from the donor to the acceptor, even over distances as long as 35 base pairs. Our data show that FRET experiments at the single molecule level are rather suited to resolve fluorescent subpopulations in heterogeneous mixture, information about strongly quenched subpopulations gets lost.

Quantum yields of luminescent lanthanide chelates and far-red dyes measured by resonance energy transfer

Luminescent lanthanide chelates have unusual spectroscopic characteristics that make them valuable alternative probes to conventional organic fluorophores. However, fundamental parameters such as their quantum yield, and radiative and nonradiative decay rates have been difficult or impossible to measure. We have developed a simple and robust method based on resonance energy transfer to accurately measure these parameters. In addition, the excitation/emission process in lanthanide chelates involves several steps, and we are able to quantify each step. These include excitation of an organic antenna, transfer of energy from the antenna to lanthanide, and then lanthanide emission. Overall, the parameters show that lanthanide chelates can be efficient long-lived emitters, making them sensitive detection reagents and excellent donors in resonance energy transfer. The method is also shown to be applicable to photophysical characterization of red-emitting dyes, which are difficult to characterize by conventional means.

Recent advances in FRET: distance determination in protein-DNA complexes

Fluorescence resonance energy transfer (FRET) provides information on the distance between a donor and an acceptor dye in the range 10 to 100 A. Knowledge of the exact positions of some dyes with respect to nucleic acids now enables us to translate these data into precise structural information using molecular modeling. Advances in the preparation of dye-labeled nucleic acid molecules and in new techniques, such as the measurement of FRET in polyacrylamide gels or in vivo, will lead to an increasingly important role of FRET in structural and molecular biology.

Fluorescence energy transfer analysis of DNA structures containing several bulges and their interaction with CAP

DNA molecules with three bulges separated by double-stranded helical sections of B-DNA were constructed to be used as substrates for DNA-protein binding assays. Fluorescence resonance energy transfer (FRET) between dye molecules attached to the 5'-ends of the DNA molecules is used to monitor the protein binding. The A5 bulge, which consists of five unpaired adenine nucleotides, alters the direction of the helical axis by approximately 80 to 90 at every bulge site. Computer molecular modeling facilitated a pre-selection of suitable helix lengths that bring the labeled ends of the three-bulge DNA molecules (60 to 70 base-pairs long) into close proximity. The FRET experiments verified that the labeled ends of the helices of these long molecules were indeed close. A series of FRET experiments was carried out with two A5 and two A7 bulge molecules. The relative positions of the bulges were varied along the central helical DNA sequence (between the bulges) in order to determine the relative angular juxtapositions of the outlying helical arms flanking the central helical region. The global structural features of the DNA molecules are manifested in the FRET data. The FRET experiments, especially those of the two-bulge series, could be interpreted remarkably well with molecular models based on the NMR structure of the A5 bulge. These models assume that the DNA molecules do not undergo large torsional conformational fluctuations at the bulge sites. The magnitude of the FRET efficiency attests to a relatively rigid structure for many of the long 5'-end-labeled molecules. The changes in the FRET efficiency of three-bulge structures containing the specific binding sequence of the catabolite activator protein (CAP) demonstrated significant deformation of the DNA upon binding of CAP. No direct interaction of CAP with the dyes was observed.

Fluorescence resonance energy transfer as a structural tool for nucleic acids

Fluorescence resonance energy transfer is a spectroscopic method that provides distance information on macromolecules in solution in the range 20-80 A. It is particularly suited to the analysis of the global structure of nucleic acids because the long-range distance information provides constraints when modelling these important structures. The application of fluorescence resonance energy transfer to nucleic acid structure has seen a resurgence of interest in the past decade, which continues to increase. An especially exciting development is the recent extension to single-molecule studies.

Probes for detection of specific DNA sequences at the single-molecule level

A method has been developed for highly sensitive detection of specific DNA sequences in a homogeneous assay using labeled oligonucleotide molecules in combination with single-molecule photon burst counting and identification. The fluorescently labeled oligonucleotides are called smart probes because they report the presence of complementary target sequences by a strong increase in fluorescence intensity. The smart probes consist of a fluorescent dye attached at the terminus of a hairpin oligonucleotide. The presented technique takes advantage of the fact that the used oxazine dye JA242 is efficiently quenched by complementary guanosine residues. Upon specific hybridization to the target DNA, the smart probe undergoes a conformational change that forces the fluorescent dye and the guanosine residues apart, thereby increasing the fluorescence intensity about six fold in ensemble measurements. To increase the detection sensitivity below the nanomolar range, a confocal fluorescence microscope was used to observe the fluorescence bursts from individual smart probes in the presence and absence of target DNA as they passed through the focused laser beam. Smart probes were excited by a pulsed diode laser emitting at 635 nm with a repetition rate of 64 MHz. Each fluorescence burst was identified by three independent parameters: (a) the burst size, (b) the burst duration, and (c) the fluorescence lifetime. Through the use of this multiparameter analysis, higher discrimination accuracies between smart probes and hybridized probe-target duplexes were achieved. The presented multiparameter detection technique permits the identification of picomolar target DNA concentrations in a homogeneous assay, i.e., the detection of specific DNA sequences in a 200-fold excess of labeled probe molecules.

Probing ligand protein binding equilibria with fluorescence fluctuation spectroscopy

We examine the binding of fluorescent ligands to proteins by analyzing the fluctuation amplitude g(0) of fluorescence fluctuation experiments. The normalized variance g(0) depends on the molecular brightness and the concentration of each species in the sample. Thus a single g(0) measurement is not sufficient to resolve individual species. Titration of the ligand with protein establishes the link between molecular brightness and concentration by fitting g(0) to a binding model and allows the separation of species. We first apply g(0) analysis to binary dye mixtures with brightness ratios of 2 and 4 to demonstrate the feasibility of this technique. Next we consider the influence of binding on the fluctuation amplitude g(0). The dissociation coefficient, the molecular brightness ratio, and the stochiometry of binding strongly influence the fluctuation amplitude. We show that proteins with a single binding site can be clearly differentiated from proteins with two independent binding sites. The binding of fluorescein-labeled digoxigenin to a high-affinity anti-digoxin antibody was studied experimentally. A global analysis of the fluctuation amplitude and the fluorescence intensity not only recovered the dissociation coefficient and the number of binding sites, but also revealed the molecular heterogeneity of the hapten-antibody complex. Two species were used to model the molecular heterogeneity. We confirmed the molecular heterogeneity independently by fluorescence lifetime experiments, which gave fractional populations and molecular brightness values that were virtually identical to those of the g(0) analysis. The identification and characterization of molecular heterogeneity have far-reaching consequences for many biomolecular systems. We point out the important role fluctuation experiments may have in this area of research.

Highly sensitive detection of hybridization of oligonucleotides to specific sequences of nucleic acids by application of fluorescence resonance energy transfer

We show a new application of fluorescence resonance energy transfer (FRET) in two stages to detect specific sequences of nucleic acids. In the first stage, two fluorescently tagged oligonucleotides hybridize with a complementary target molecule to produce FRET. The sequences of the oligonucleotides and spectral properties of fluorophores are chosen to provide a basis for an efficient energy transfer. In the next step, the specificity of hybridization is tested by competition of labeled probes with an excess of unlabeled oligonucleotides of the same sequence. The resulting emission spectra, one obtained in the excess of unlabeled donor probe and the other produced in the excess of unlabeled acceptor probe, are compared with the spectrum from the first stage to look for differences in the emission pattern of the fluorescent labels. We show that it is possible to detect the existence of specific hybrids composed of the two probes and complementary target molecule even in very unfavorable conditions, such as the presence of unhybridized probes in the final reaction mixture, secondary nonacceptor quenching of donor probe fluorescence, and strong background emission of acceptor produced by its direct excitation with a donor excitation light.

DNA bending induced by high mobility group proteins studied by fluorescence resonance energy transfer

The HMG domains of the chromosomal high mobility group proteins homologous to the vertebrate HMG1 and HMG2 proteins preferentially recognize distorted DNA structures. DNA binding also induces a substantial bend. Using fluorescence resonance energy transfer (FRET), we have determined the changes in the end-to-end distance consequent on the binding of selected insect counterparts of HMG1 to two DNA fragments, one of 18 bp containing a single dA(2) bulge and a second of 27 bp with two dA(2) bulges. The observed changes are consistent with overall bend angles for the complex of the single HMG domain with one bulge and of two domains with two bulges of approximately 90-100 degrees and approximately 180-200 degrees, respectively. The former value contrasts with an inferred value of 150 degrees reported by Heyduk et al. (1) for the bend induced by a single domain. We also observe that the induced bend angle is unaffected by the presence of the C-terminal acidic region. The DNA bend of approximately 95 degrees observed in the HMG domain complexes is similar in magnitude to that induced by the TATA-binding protein (80 degrees), each monomeric unit of the integration host factor (80 degrees), and the LEF-1 HMG domain (107 degrees). We suggest this value may represent a steric limitation on the extent of DNA bending induced by a single DNA-binding motif.