Block Copolymer Nanoparticles Remove Biofilms of Drug-Resistant Gram-Positive Bacteria by Nanoscale Bacterial Debridement

Recent Progress in Bile Acid-Based Antimicrobials

With the emergence of drug-resistant bacteria and the formation of biofilms by bacteria and fungi, microbial infections gradually threaten global health. Natural antimicrobial peptides (AMPs) have low susceptibility for developing resistance due to the membrane targeted mechanism, but instability and high manufacturing cost limit their applications in clinic. Bile acids, a group of steroids in the human body, with high stability, biocompatibility, and inherent facial amphiphilic structure similar to the characteristics of AMPs, have been applied to the biological field, such as drug delivery systems, self-healing hydrogels, antimicrobials, and so on. In this review, we mainly focus on the different classes of bile acid-based antimicrobials in recent years. Various designs and methods for the preparation of unimolecular antimicrobials with bile acid skeletons are first introduced, including coupling of primary amine, quaternary ammonium, and amino acid units with bile acid skeletons. Some representative oligomeric antimicrobials, including dimers of bile acids, are summarized. Finally, macromolecular antimicrobials bearing some positive charges at the main chain or side chain and interaction mechanisms of these bile acid-based antimicrobials are discussed.

Nontoxic Antimicrobial Cationic Peptide Nanoconstructs with Bacteria-Displaceable Polymeric Counteranions

Antimicrobial peptides that target the integrity of bacterial envelopes can eradicate pathogens with little development of resistance, but they often inflict nonselective toxicity toward mammalian cells. The prevailing approach to optimize the selectivity of cationic peptides has been to modify their composition. Instead, we invent a new generation of broad-spectrum antibacterial nanoconstructs with negligible mammalian cell toxicity through a competitive displacement of counter polyanions from the complementary polycations. The nanoconstruct, which has a highly cationic Au nanoparticles (NPs) core shielded by polymeric counterions, is inert in nonbacterial environments. When exposed to negatively charged bacterial envelopes, this construct sheds its polyanions, triggering a cationic Au NP/bacterial membrane interaction that rapidly kills Gram-positive and Gram-negative bacteria. The anionic charge and hydrophilicity of the polyanion provides charge neutralization for the peptide-decorated Au NP core, but it is also bacteria-displaceable. These results provide a foundation for the development of other cationic particles and polymeric counterion combinations with potent antimicrobial activity without toxicity.

Current and novel therapeutic strategies for the management of cystic fibrosis

Introduction: Cystic fibrosis (CF), is caused by mutations in the cystic fibrosis transmembrane conductance regulator (CFTR) gene and affects thousands of people throughout the world. Lung disease is the leading cause of death in CF patients. Despite the advances in treatments, the management of CF mainly targets symptoms. Recent CFTR modulators however target common mutations in patients, alleviating symptoms of CF. Unfortunately, there is still no approved treatments for patients with rare mutations to date.Areas covered: This paper reviews current treatments of CF that mitigate symptoms and target genetic defects. The use of gene and drug delivery systems such as viral or non-viral vectors and nano-compounds to enhance CFTR expression and the activity of antimicrobials against chronic pulmonary infections respectively, will also be discussed.Expert opinion: Nano-compounds tackle biological barriers to drug delivery and revitalize antimicrobials, anti-inflammatory drugs and even genes delivery to CF patients. Gene therapy and gene editing are of particular interest because they have the potential to directly target genetic defects. Nanoparticles should be formulated to more specifically target epithelial cells, and biofilms. Finally, the development of more potent gene vectors to increase the duration of gene expression and reduce inflammation is a promising strategy to eventually cure CF.

Amphiphilic diblock copolymers of poly(glycidol) with biodegradable polyester/polycarbonate. organocatalytic one-pot ROP and self-assembling property

Poly(glycidol)-based block copolymers with excellent micelle formation properties were prepared via organocatalytic one-pot ROP.

Nanomaterial-based therapeutics for antibiotic-resistant bacterial infections

Antibiotic-resistant bacterial infections arising from acquired resistance and/or through biofilm formation necessitate the development of innovative 'outside of the box' therapeutics. Nanomaterial-based therapies are promising tools to combat bacterial infections that are difficult to treat, featuring the capacity to evade existing mechanisms associated with acquired drug resistance. In addition, the unique size and physical properties of nanomaterials give them the capability to target biofilms, overcoming recalcitrant infections. In this Review, we highlight the general mechanisms by which nanomaterials can be used to target bacterial infections associated with acquired antibiotic resistance and biofilms. We emphasize design elements and properties of nanomaterials that can be engineered to enhance potency. Lastly, we present recent progress and remaining challenges for widespread clinical implementation of nanomaterials as antimicrobial therapeutics.

Screening and Matching Amphiphilic Cationic Polymers for Efficient Antibiosis

The amphiphilic cationic polymers that mimic antimicrobial peptides have received increasing attention due to their excellent antibacterial activity. However, the relationship between the structure of cationic polymers and its antibacterial effect remains unclear. In our current work, a series of PEG blocked amphiphilic cationic polymers composed of hydrophobic alkyl-modified and quaternary ammonium salt (QAS) moieties have been prepared. The structure-antibacterial activity relationship of these cationic polymers was investigated against E. coli and S. aureus, including PEGylation, random structure, molecular weights, and the content and lengths of the hydrophobic alkyl side chains. The results indicated that PEGylated random amphiphilic cationic copolymer (mPB₃₅/T₅₇) showed stronger antibacterial activity and better biocompatibility than the random copolymer without PEG (PB₃₃/T₅₆). Furthermore, mPB₃₅/T₅₇ with appropriate mole fraction of alkyl side chains (f_alkyl = 0.38), degree of polymerization (DP = 92), and four-carbon hydrophobic alkyl moieties was found to have the optimal structure that revealed the best antibacterial activities against both E. coli (MIC = 8 μg/mL, selectivity > 250) and S. aureus (MIC = 4 μg/mL, selectivity > 500). More importantly, mPB₃₅/T₅₇ could effectively eradicate E. coli biofilms by killing the bacteria embedded in the biofilms. Therefore, the structure of mPB₃₅/T₅₇ provided valuable information for improving the antibacterial activity of cationic polymers.

Molecular Sizes and Antibacterial Performance Relationships of Flexible Ionic Liquid Derivatives

Cationic agents, such as ionic liquids (ILs)-based species, have broad-spectrum antibacterial activities. However, the antibacterial mechanisms lack systematic and molecular-level research, especially for Gram-negative bacteria, which have highly organized membrane structures. Here, we designed a series of flexible fluorescent diketopyrrolopyrrole-based ionic liquid derivatives (ILDs) with various molecular sizes (1.95-4.2 nm). The structure-antibacterial activity relationships of the ILDs against Escherichia coli (E. coli) were systematically studied thorough antibacterial tests, fluorescent tracing, morphology analysis, molecular biology, and molecular dynamics (MD) simulations. ILD-6, with a relatively small molecular size, could penetrate through the bacterial membrane, leading to membrane thinning and intracellular activities. ILD-6 showed fast and efficient antimicrobial activity. With the increase of molecular sizes, the corresponding ILDs were proven to intercalate into the bacterial membrane, leading to the destabilization of the lipid bilayer and further contributing to the antimicrobial activities. Moreover, the antibacterial activity of ILD-8 was limited, where the size was not large enough to introduce significant membrane disorder. Relative antibacterial experiments using another common Gram-negative bacteria, Pseudomonas aeruginosa (PAO1), further confirmed the proposed structure-antibacterial activity relationships of ILDs. More impressively, both ILD-6 and ILD-12 displayed significant in vivo therapeutic effects on the PAO1-infected rat model, while ILD-8 performed poorly, which confirmed the antibacterial mechanism of ILDs and proved their potentials for future application. This work clarifies the interactions between molecular sizes of ionic liquid-based species and Gram-negative bacteria and will provide useful guidance for the rational design of high-performance antibacterial agents.

TME-Responsive Polyprodrug Micelles for Multistage Delivery of Doxorubicin with Improved Cancer Therapeutic Efficacy in Rodents

It is of great significance to develop multifunctional biomaterials to effectively deliver anticancer drug to tumor cells for cancer therapy. Here, inspired by the specific tumor microenvironment (TME) cues, a unique multistage pH/redox-responsive polyprodrug composed of amphiphilic pH-sensitive diblock copolymer poly(ethylene glycol) methyl ether-b-poly(β-amino esters) conjugated with doxorubicin (DOX) via redox-sensitive disulfide bonds (mPEG-b-PAE-ss-DOX) is designed and developed. This polyprodrug can self-assemble into micelles (DOX-ss@PMs) at low concentration with high serum stability, indicating that DOX-ss@PMs have prolonged circulation time. The dual pH/redox-responsiveness of the multistage platform is thoroughly evaluated. In vitro results demonstrate that DOX-ss@PMs can highly accumulate at tumor site, followed by responding to the acidity for disassembly and effectively penetrating into the tumor cells. DOX is released from the platform due to the cleavage of disulfide bonds induced by high glutathione (GSH) concentration, thereby inducing the apoptosis of tumor cells. In vivo studies further reveal that multistage DOX-ss@PMs can more efficiently inhibit the growth of tumors and improve the survival of tumor-bearing mice in comparison to the free drug and control. These results imply that multistage delivery system might be a potential and effective strategy for drug delivery and DOX-ss@PMs could be a promising nanomedicine for cancer chemotherapy.

Synthetic Polypeptide Polymers as Simplified Analogues of Antimicrobial Peptides

Antimicrobial peptides (AMPs) are naturally occurring macromolecules made of amino acids that are potent broad-spectrum antibiotics with potential as novel therapeutic agents. This review aims to summarize the fundamental principles concerning the structure and mechanism of action of these AMPs, in order to guide the design of polymeric analogues that organic chemistry can generate. Among those simplified analogues, this review particularly focuses on those made of amino acids called polypeptide polymers: they are showing great potential by providing one of the best biomimetic and bioactive structures for further biomaterials science applications.

Specific Anti-biofilm Activity of Carbon Quantum Dots by Destroying P. gingivalis Biofilm Related Genes

Introduction

Biofilms protect bacteria from antibiotics and this can produce drug-resistant strains, especially the main pathogen of periodontitis, Porphyromonas gingivalis. Carbon quantum dots with various biomedical properties are considered to have great application potential in antibacterial and anti-biofilm treatment.

Methods

Tinidazole carbon quantum dots (TCDs) and metronidazole carbon quantum dots (MCDs) were prepared by a hydrothermal method with the clinical antibacterial drugs tinidazole and metronidazole, respectively. Then, TCDs and MCDs were characterized by transmission electron microscopy, UV–visible spectroscopy, infrared spectroscopy and energy-dispersive spectrometry. The antibacterial effects were also investigated under different conditions.

Results

The TCDs and MCDs had uniform sizes. The results of UV–visible and energy-dispersive spectrometry confirmed their important carbon polymerization structures and the activity of the nitro group, which had an evident inhibitory effect on P. gingivalis, but almost no effect on other bacteria, including Escherichia coli, Staphylococcus aureus and Prevotella nigrescens. Importantly, the TCDs could penetrate the biofilms to further effectively inhibit the growth of P. gingivalis under the biofilms. Furthermore, it was found that the antibacterial effect of TCDs lies in its ability to impair toxicity by inhibiting the major virulence factors and related genes involved in the biofilm formation of P. gingivalis, thus affecting the self-assembly of biofilm-related proteins.

Conclusion

The findings demonstrate a promising new method for improving the efficiency of periodontitis treatment by penetrating the P. gingivalis biofilm with preparations of nano-level antibacterial drugs.

Particulate-Aggregated Adhesives with Exudate-Sensitive Properties and Sustained Bacteria Disinfection to Facilitate Wound Healing

Wound-associated infections create additional suffering and come at a high cost for patients and their families, which urgently require wound disinfection biomaterials with improved healing efficacy. Here, we report an adhesive with sustained bacteria disinfection ability, which is aggregated from hydrogen-bonded polymer particulates. The particulate-aggregated adhesive shows strong binding ability on different surfaces from rigid substrates to soft skins. Moreover, water-sensitive mechanical properties are shown in wound exudates, resulting from the dissociation of hydrogen bonds under the competition of water and thus the sustained release of particulates. Synergizing with the strong binding ability, exudate-sensitive behaviors, and sustained release of antibacterial particulates, the adhesive achieves sustained bactericidal activity and can facilitate the healing process in bacteria-infected skin wounds.

Functionalized Polymers Enhance Permeability of Antibiotics in Gram-negative MDR Bacteria and Biofilms for Synergistic Antimicrobial Therapy

The emergence of multi-drug resistant pathogenic bacteria constitutes a key threat to global health. Infections caused by multi-drug resistant Gram-negative bacteria are particularly challenging to treat due to the ability of pathogens to prevent antibiotic penetration inside the bacterial membrane. Antibiotic therapy is further rendered ineffective due to biofilm formation where the protective Extracellular Polymeric Substance (EPS) matrix limits the diffusion of antibiotics inside the biofilm. We hypothesized that careful engineering of chemical groups on polymer scaffolds could enable polymers to penetrate the barriers of Gram-negative bacterial membrane and biofilm matrix. Here, we present the use of engineered polymeric nanoparticles in combination with antibiotics for synergistic antimicrobial therapy. These polymeric nanoparticles enhance the accumulation of antibiotics inside Gram-negative bacteria and biofilm matrix, resulting in increased potency of antibiotics in combination therapy. Sub-lethal concentrations of engineered polymeric nanoparticles reduce the antibiotic dosage by 32-fold to treat MDR bacteria and biofilms. Tailoring of chemical groups on polymers demonstrate a strong-structure activity relationship in generating additive and synergistic combinations with antibiotics. This study demonstrates the ability of polymeric nanoparticles to 'rejuvenate' antibiotics rendered ineffective by resistant bacteria and provides a rationale to design novel compounds to achieve effective antimicrobial combination therapies.

Multifunctional quaternized carbon dots with enhanced biofilm penetration and eradication efficiencies

Biofilm formation can lead to the treatment failure of persistent bacterial infections. Although a variety of antibacterial agents have been developed, the restricted drug penetration and the embedded bacteria's potentiated recalcitrance to these agents synergistically lead to the unsatisfactory anti-biofilm effect. Herein, we report the applications of metal-free quaternized carbon dots (CDs) in imaging and eliminating bacterial biofilms. The CDs prepared by the solvothermal treatment of dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride (abbreviated as Si-QAC) and glycerol possess ultrasmall size (ca. 3.3 ± 0.4 nm) and strong positively charged (zeta potential: ca. +33.1 ± 2.5 mV) surfaces with long alkyl chain-linked quaternary ammonium groups. The small size of the CDs endows them with the penetration ability into the interior of Gram-negative and Gram-positive bacterial biofilms, which enables excellent fluorescence imaging of the biofilms. Due to the different surfaces of the two types of bacteria, the positively charged CDs selectively interact with the more negatively charged Gram-positive bacteria via electrostatic and hydrophobic interactions, which inactivates the Gram-positive bacteria and ultimately eradicates the Gram-positive bacterial biofilms. In addition, we synthesize a new type of quaternized CDs without long alkyl chains (termed TTPAC CDs), and validate that the long alkyl chains potentiate the hydrophobic adhesion between CDs and Gram-positive bacteria. Meanwhile, the crystal violet staining results reveal that the cationic CDs inhibit the formation of Gram-positive bacterial biofilms. Collectively, our work highlights the feasibility of using cationic and ultrasmall metal-free CDs to eliminate and inhibit Gram-positive bacterial biofilms, which represents a highly effective strategy to cope with refractory biofilm-associated infections.

Nanoparticulate drug-delivery systems for fighting microbial biofilms: from bench to bedside

Biofilms are highly tolerant to antimicrobial agents and adverse environmental conditions being important reservoirs for chronic and hard-to-treat infections. Nanomaterials exhibit microbiostatic/microbicidal/antipathogenic properties and can be also used for the delivery of antibiofilm agents. However, few of the many promising leads offered by nanotechnology reach clinical studies and eventually, become available to clinicians. The aim of this paper was to review the progress and challenges in the development of nanotechnology-based antibiofilm drug-delivery systems. The main identified challenges are: most papers report only in vitro studies of the activity of different nanoformulations; lack of standardization in the methodological approaches; insufficient collaboration between material science specialists and clinicians; paucity of in vivo studies to test efficiency and safety.

Biguanide-Derived Polymeric Nanoparticles Kill MRSA Biofilm and Suppress Infection In Vivo

Methicillin-resistant Staphylococcus aureus (MRSA) is a significant cause of drug-resistant infections. Its propensity to develop biofilms makes it especially resistant to conventional antibiotics. We present a novel nanoparticle (NP) system made from biocompatible F-127 surfactant, tannic acid (TA), and biguanide-based polymetformin (PMET) (termed FTP NPs), which can kill MRSA biofilm bacteria effectively in vitro and in vivo and which has excellent biocompatibility. FTP NPs exhibit biofilm bactericidal activity-ability to kill bacteria both inside and outside biofilm-significantly better than many antimicrobial peptides or polymers. At low concentrations (8-32 μg/mL) in vitro, FTP NPs outperformed PMET with ∼100-fold (∼2 log₁₀) greater reduction of MRSA USA300 biofilm bacterial cell counts, which we attribute to the antifouling property of the hydrophilic poly(ethylene glycol) contributed by F-127. Further, in an in vivo murine excisional wound model, FTP NPs achieved 1.8 log₁₀ reduction of biofilm-associated MRSA USA300 bacteria, which significantly outperformed vancomycin (0.8 log₁₀ reduction). Moreover, in vitro cytotoxicity tests showed that FTP NPs have less toxicity than PMET toward mammalian cells, and in vivo intravenous injection of FTP NPs at 10 mg/kg showed no acute toxicity to mice with negligible body weight loss and no significant perturbation of blood biomarkers. These biguanide-based FTP NPs are a promising approach to therapy of MRSA infections.

Enhanced bacterial killing by vancomycin in staphylococcal biofilms disrupted by novel, DMMA-modified carbon dots depends on EPS production

Alternatives for less and less effective antibiotic treatment of bacterial infections, are amongst others based on nanotechnological innovations, like carbon-dots. However, with a focus on chemistry, important characteristics of bacterial strains, like (in-)ability to produce extracellular-polymeric-substances (EPS) are often neglected. EPS is the glue that certain bacterial strains produce to keep a biofilm together. Here we report on synthesis of novel, pH-responsive, 2,3-dimethylmaleic-anhydride modified carbon-dots (C_DMMA-dots). C_DMMA-dots, like unmodified C-dots without DMMA, were little bactericidal. However, C_DMMA-dots reduced volumetric-bacterial-density within the acidic-environment of a biofilm for a non-EPS-producing Staphylococcus epidermidis strain, indicative for a more open structure. Such a structural disruption was not observed for an EPS-producing strain. Disrupted biofilms of the non-EPS-producing strain pre-exposed to C_DMMA-dots at pH 5.0, were more amenable to vancomycin penetration and killing of their inhabitants than biofilms of EPS-producing-staphylococci. Herewith, we describe a new role of carbon-dots as synthetic disruptants of biofilm structure. It is a partial success story, identifying the challenge of making carbon-dots that act as a universal disruptant for biofilms of strains with different microbiological characteristics, most notably the ability to produce or not-produce EPS. Such carbon-dots, will enable more effective clinical treatment of bacterial infections combined with current antibiotics.

Structural Superiority of Guanidinium-Rich, Four-Armed Copolypeptides: Role of Multiple Peptide-Membrane Interactions in Enhancing Bacterial Membrane Perturbation and Permeability

The development of novel antimicrobials is a top priority to address the growing epidemic of multidrug-resistant pathogens. Since cationic nonamphiphilic star-shaped antimicrobials are promising molecular scaffolds that provide a high charge density in binding anionic bacterial bilayers, this research aimed to further increase their membrane perturbation capability by introducing guanidinium groups to the antimicrobials via enhancing membrane insertion. In particular, computational simulation and experimental investigations revealed that our designed guanidinium-rich alternating copolypeptide, four-armed poly(arginine-alt-glycine), can interact with both the headgroups and unsaturated tails of phospholipids in bacterial membranes through multiple interactions, including electrostatic, cation-π, and T-shaped π-π interactions, allowing it to penetrate deeper inside the biologically inaccessible high-energy barrier of the hydrophobic lipid bilayer interior to cause membrane permeabilization and precipitation of the bacterial cytoplasm. Furthermore, glycine was observed to have a unique effect in enhancing the performance of arginine-based copolypeptide. Four-armed poly(arginine-alt-glycine) exhibited broad-spectrum antimicrobial activity, high bactericidal efficiency, and negligible hemolysis. The in vivo antibacterial performance of the copolypeptide was superior to that of doxycycline in a mouse model of Pseudomonas aeruginosa skin infection, accompanied by negligible local and systemic toxicity. Our results demonstrate that this guanidinium-rich, nonamphiphilic, star-shaped structure may promote the development of next-generation antimicrobials.

Enhancing curcumin's solubility and antibiofilm activity via silica surface modification

Bacterial biofilms are microbial communities in which bacterial cells in sessile state are mechanically and chemically protected against foreign agents, thus enhancing antibiotic resistance. The delivery of active compounds to the inside of biofilms is often hindered due to the existence of the biofilm extracellular polymeric substances (EPS) and to the poor solubility of drugs and antibiotics. A possible strategy to overcome the EPS barrier is the incorporation of antimicrobial agents into a nanocarrier, able to penetrate the matrix and deliver the active substance to the cells. Here, we report the synthesis of antimicrobial curcumin-conjugated silica nanoparticles (curc-NPs) as a possibility for dealing with these issues. Curcumin is a known antimicrobial agent and to overcome its low solubility in water it was grafted onto the surface of silica nanoparticles, the latter functioning as nanocarrier for curcumin into the biofilm. Curc-NPs were able to impede the formation of model P. putida biofilms up to 50% and disrupt mature biofilms up to 54% at 2.5 mg mL^-1. Cell viability of sessile cells in both cases was also considerably affected, which is not observed for curcumin delivered as a free compound at the same concentration. Furthermore, proteomics of extracted EPS matrix of biofilms grown in the presence of free curcumin and curc-NPs revealed differences in the expression of key proteins related to cell detoxification and energy production. Therefore, curc-NPs are presented here as an alternative for curcumin delivery that can be exploited not only to other bacterial strains but also to further biological applications.

pH responsive superporogen combined with PDT based on poly Ce6 ionic liquid grafted on SiO2 for combating MRSA biofilm infection

Background: Biofilm infection caused by multidrug-resistant bacteria is difficult to eradicate by conventional therapies. Photodynamic therapy (PDT) is an effective antibacterial method for fighting against biofilm infection. However, the blocked photosensitizers outside of biofilm greatly limit the efficacy of PDT.

Methods: Herein, a novel acid-responsive superporogen and photosensitizer (SiO₂-P_Ce6-IL) was developed. Because of the protonation of the photosensitizer and the high binding energy of the polyionic liquid, SiO₂-P_Ce6-IL changed to positive SiO₂-P_IL⁺ in an acidic microenvironment of biofilm infection. SiO₂-P_IL⁺ could combine with negatively charged extracellular polymeric substances (EPS) and create holes to remove the biofilm barrier. To strengthen the interaction between SiO₂-P_IL⁺ and EPS, SiO₂-P_IL⁺ of high charge density was prepared by grafting the high-density initiation site of ATRP onto the surface of the SiO₂ base.

Results: Due to the rapid protonation rate of COO^- and the strong binding energy of SiO₂-P_IL⁺ with EPS, SiO₂-P_Ce6-IL could release 90% of Ce6 in 10 s. With the stronger electrostatic and hydrophobic interaction of SiO₂-P_IL⁺ with EPS, the surface potential, hydrophobicity, adhesion and mechanical strength of biofilm were changed, and holes in the biofilm were created in 10 min. Combining with the release of photosensitizers and the porous structure of the biofilm, Ce6 was efficiently concentrated in the biofilm. The in vitro and in vivo antibacterial experiments proved that SiO₂-P_Ce6-IL dramatically improved the PDT efficacy against MRSA biofilm infection.

Conclusion: These findings suggest that SiO₂-P_Ce6-IL could rapidly increase the concentration of photosensitizer in biofilm and it is an effective therapy for combating biofilm infection.

Antimicrobial Peptide-Loaded Nanoparticles as Inhalation Therapy for Pseudomonas aeruginosa Infections

INTRODUCTION

Antibiotic-resistant bacteria kill 25,000 people every year in the EU. Patients subject to recurrent lung infections are the most vulnerable to severe or even lethal infections. For these patients, pulmonary delivery of antibiotics would be advantageous, since inhalation can achieve higher concentration in the lungs than iv administration and can provide a faster onset of action. This would allow for the delivery of higher doses and hence reduce the number of treatments required. We report here about a new nanosystem (M33-NS) obtained by capturing SET-M33 peptide on single-chain dextran nanoparticles. SET-M33 is a non-natural antimicrobial peptide synthesized in branched form. This form gives the peptide resistance to degradation in biological fluids. SET-M33 has previously shown efficacy in vitro against about one hundred of Gram-negative multidrug and extensively drug-resistant clinical isolates and was also active in preclinical infection models of pneumonia, sepsis and skin infections.

METHODS

The new nanosystem was evaluated for its efficacy in bacteria cells and in a mouse model of pneumonia. Toxicity and genotoxicity were also tested in vitro. Biodistribution and pharmacokinetic studies in healthy rats were carried out using a radiolabeled derivative of the nanosystem.

RESULTS

The M33-nanosystem, studied here, showed to be effective against Pseudomonas aeruginosa in time-kill kinetic experiments. Cytotoxicity towards different animal cell lines was acceptable. Lung residence time of the antimicrobial peptide, administered via aerosol in healthy rats, was markedly improved by capturing SET-M33 on dextran nanoparticles. M33-NS was also efficient in eradicating pulmonary infection in a BALB/c mouse model of pneumonia caused by P. aeruginosa.

DISCUSSION

This study revealed that the encapsulation of the antimicrobial peptide in dextran nanoparticles markedly improved lung residence time of the peptide administered via aerosol. The result has to be considered among the aims of the development of a new therapeutic option for patients suffering recurrent infections, that will benefit from high local doses of persistent antimicrobials.

Light-Activable On-Demand Release of Nano-Antibiotic Platforms for Precise Synergy of Thermochemotherapy on Periodontitis

The overprescription and improper use of antibiotics have contributed to the evolution of bacterial resistance, making it urgent to develop alternative therapies and agents with better efficacy as well as less toxicity to combat bacterial infections and keep new resistance from developing. In this work, a novel light-activable nano-antibiotic platform (TC-PCM@GNC-PND) was constructed by the incorporation of gold nanocages (GNC) and two thermosensitive gatekeepers, phase-change materials (PCM) and thermosensitive polymer poly(N-isopropylacrylamide-co-diethylaminoethyl methacrylate) (PND), to realize precisely the synergy of photothermal and antimicrobial drugs. GNC exhibits an excellent photothermal effect owing to its strong absorbance in the near-infrared (NIR) region, and hollow interiors make it a favorable vehicle for loading various antibiotics such as tetracycline (TC). The release of the encapsulated drugs could be precisely controlled by NIR light through the dual thermosensitive interaction of liquid-solid transition of PCM and coil-granule transition of PND, improving efficacy and alleviating side effects with on-demand drug release. The thermosensitive hydrogel was formed in situ upon application with body temperature, enhancing retention of the antimicrobial agent in local infectious sites. Highly effective ablation of bacteria is achieved both in vitro and in periodontitis models with little toxicity owing to the synergy of photothermal effects and chemotherapeutic drug release induced by NIR. This study could provide guidance for the design of antibacterial materials and shed substantial light on synergistic treatment.

Self-Assembled Saccharide-Functionalized Amphiphilic Metallacycles as Biofilms Inhibitor via "Sweet Talking"

Bacterial biofilms are troublesome in the treatment of bacterial infectious diseases due to their inherent resistance to antibiotic therapy. Exploration of alternative antibiofilm reagents provides opportunities to achieve highly effective treatments. Herein, we propose a strategy to employ self-assembled saccharide-functionalized amphiphilic metallacycles ([2+2]-Gal, [3+3]-Gal, and [6+6]-Gal) with multiple positive charges as a different type of antibacterial reagent, marrying saccharide functionalization that interact with bacteria via "sweet talking". These self-assembled glyco-metallacycles gave various nanostructures (nanoparticles, vesicles or micron-sized vesicles) with different biofilms inhibition effect on Staphylococcus aureus (S. aureus). Especially, the peculiar self-assembly mechanism, superior antibacterial effect and biofilms inhibition distinguished the [6+6]-Gal from other metallacycles. Meanwhile, in vivo S. aureus pneumonia animal model experiments suggested that [6+6]-Gal could relieve mice pneumonia aroused by S. aureus effectively. In addition, the control study of metallacycle [3+3]-EG₅ confirmed the significant role of galactoside both in the self-assembly process and the antibacterial efficacy. In view of the superior effect against bacteria, the saccharide-functionalized metallacycle could be a promising candidate as biofilms inhibitor or treatment agent for pneumonia.

Gold nanorods with surface charge-switchable activities for enhanced photothermal killing of bacteria and eradication of biofilm

The gold nanorods (PCB-AuNRs) with pH induced surface charge transform activities were used for photothermal disinfection of planktonic bacteria and eradication of bacterial biofilms.

Dual Corona Vesicles with Intrinsic Antibacterial and Enhanced Antibiotic Delivery Capabilities for Effective Treatment of Biofilm-Induced Periodontitis

Periodontitis is a common disease caused by plaque biofilms, which are important pathogenic factors of many diseases and may be eradicated by antibiotic therapy. However, low-dose antibiotic therapy is a complicated challenge for eradicating biofilms as hundreds (even thousands) of times higher concentrations of antibiotics are needed than killing planktonic bacteria. Polymer vesicles may solve these problems via effective antibiotic delivery into biofilms, but traditional single corona vesicles lack the multifunctionalities essential for biofilm eradication. In this paper, we aim to effectively treat biofilm-induced periodontitis using much lower concentrations of antibiotics than traditional antibiotic therapy by designing a multifunctional dual corona vesicle with intrinsic antibacterial and enhanced antibiotic delivery capabilities. This vesicle is co-assembled from two block copolymers, poly(ε-caprolactone)-block-poly(lysine-stat-phenylalanine) [PCL-b-P(Lys-stat-Phe)] and poly(ethylene oxide)-block-poly(ε-caprolactone) [PEO-b-PCL]. Both PEO and P(Lys-stat-Phe) coronas have their specific functions: PEO endows vesicles with protein repelling ability to penetrate extracellular polymeric substances in biofilms ("stealthy" coronas), whereas P(Lys-stat-Phe) provides vesicles with positive charges and broad spectrum intrinsic antibacterial activity. As a result, the dosage of antibiotics can be reduced by 50% when encapsulated in the dual corona vesicles to eradicate Escherichia coli or Staphylococcus aureus biofilms. Furthermore, effective in vivo treatment has been achieved from a rat periodontitis model, as confirmed by significantly reduced dental plaque, and alleviated inflammation. Overall, this "stealthy" and antibacterial dual corona vesicle demonstrates a fresh insight for improving the antibiofilm efficiency of antibiotics and combating the serious threat of biofilm-associated diseases.

Improving the antimicrobial efficacy against resistant Staphylococcus aureus by a combined use of conjugated oligoelectrolytes

Two membrane-intercalating conjugated oligoelectrolytes (COEs), namely COE-D8 and COE-S6, were combined to achieve enhanced antimicrobial efficacy. COE-D8 has a shorter molecular length than COE-S6 and is typical of effective antimicrobial COE molecules, presumably due to its prominent membrane disrupting function. In contrast, COE-D6 exhibits lower efficacy against bacteria and lower toxicity toward mammalian cells. Surprisingly, after supplementing 8 μM COE-S6, the minimum inhibitory concentration (MIC) of COE-D8 against methicillin-resistant Staphylococcus aureus (MRSA) was improved 8-fold, from 0.5 μM to 0.063 μM (0.050 μg mL-1). No increased toxicity toward mammalian cells was observed by the combination of COEs, as indicated by cytotoxicity measurements using the 3T3 cell line. Indeed, there is an extended ratio between the half maximal inhibitory concentration based on 3T3 cells to MIC against MRSA from 12 to greater than 256. Biophysical experiments using liposome models suggest that COE-S6 promotes the interactions between COE-D8 and lipid bilayers, which is in agreement with damages of cellular permeability and morphology, as observed by confocal microscopy and scanning electron microscopy. The application of a combined mixture of COEs further demonstrates their promising potential as a new class of antimicrobial agents with high efficacy and selectivity.

Strength of bacterial adhesion on nanostructured surfaces quantified by substrate morphometry

Microbial adhesion and the subsequent formation of resilient biofilms at surfaces are decisively influenced by substrate properties, such as the topography. To date, studies that quantitatively link surface topography and bacterial adhesion are scarce, as both are not straightforward to quantify. To fill this gap, surface morphometry combined with single-cell force spectroscopy was performed on surfaces with irregular topographies on the nano-scale. As surfaces, hydrophobized silicon wafers were used that were etched to exhibit surface structures in the same size range as the bacterial cell wall molecules. The surface structures were characterized by a detailed morphometric analysis based on Minkowski functionals revealing both qualitatively similar features and quantitatively different extensions. We find that as the size of the nanostructures increases, the adhesion forces decrease in a way that can be quantified by the area of the surface that is available for the tethering of cell wall molecules. In addition, we observe a bactericidal effect, which is more pronounced on substrates with taller structures but does not influence adhesion. Our results can be used for a targeted development of 3D-structured materials for/against bio-adhesion. Moreover, the morphometric analysis can serve as a future gold standard for characterizing a broad spectrum of material structures.

Recent Advances and Future Prospects on Adaptive Biomaterials for Antimicrobial Applications

Bacterial infection is becoming the biggest threat to human health. The scenario is partly due to the ineffectiveness of the conventional antibiotic treatments against the emergence of multidrug-resistant bacteria and partly due to the bacteria living in biofilms or cells. Adaptive biomaterials can change their physicochemical properties in the microenvironment of bacterial infection, thereby facilitating either their interactions with bacteria or drug release. The trends in treating bacterial infections using adaptive biomaterials-based systems are flourishing and generate innumerous possibility to design novel antimicrobial therapeutics. This feature article aims to summarize the recent developments in the formulations, mechanisms, and advances of adaptive materials in bacterial infection diagnosis, contact killing of bacteria, and antimicrobial drug delivery. Also, the challenges and limitations of current antimicrobial treatments based on adaptive materials and their clinical and industrial future prospects are discussed.

Enantiomeric glycosylated cationic block co-beta-peptides eradicate Staphylococcus aureus biofilms and antibiotic-tolerant persisters

The treatment of bacterial infections is hindered by the presence of biofilms and metabolically inactive persisters. Here, we report the synthesis of an enantiomeric block co-beta-peptide, poly(amido-D-glucose)-block-poly(beta-L-lysine), with high yield and purity by one-shot one-pot anionic-ring opening (co)polymerization. The co-beta-peptide is bactericidal against methicillin-resistant Staphylococcus aureus (MRSA), including replicating, biofilm and persister bacterial cells, and also disperses biofilm biomass. It is active towards community-acquired and hospital-associated MRSA strains which are resistant to multiple drugs including vancomycin and daptomycin. Its antibacterial activity is superior to that of vancomycin in MRSA mouse and human ex vivo skin infection models, with no acute in vivo toxicity in repeated dosing in mice at above therapeutic levels. The copolymer displays bacteria-activated surfactant-like properties, resulting from contact with the bacterial envelope. Our results indicate that this class of non-toxic molecule, effective against different bacterial sub-populations, has promising potential for the treatment of S. aureus infections.

The authors report the synthesis of an enantiomeric block co-beta-peptide that kills methicillin-resistant Staphylococcus aureus, including biofilm and persister bacterial cells, and disperses biofilms. The copolymer displays antibacterial activity in human ex vivo and mouse in vivo infection models without toxicity.

2D Graphdiyne Oxide Serves as a Superior New Generation of Antibacterial Agents

Graphdiyne (GDY) as an emerging 2D carbon-network nanomaterial possesses many fascinating properties that lead to numerous exciting applications, but the use of GDY and its derivatives in the antibacterial field has not yet been discovered. In this study, we first report on the use and evaluation of GDY and graphdiyne oxide (GDYO) as antibacterial agents and propose the antibacterial mechanisms of GDY-based nanomaterials. GDYO has been synthesized via the surface oxidation of GDY, and the antibacterial activity of GDYO has been compared with that of GDY through a series of antibacterial tests. Surprisingly, surface oxidation endowed inert GDY with superior antibacterial capability against two representative bacterial models: Escherichia coli and Staphylococcus aureus. Antibacterial mechanism experiments disclose that the antibacterial function of GDYO is a result of reactive oxygen species-dependent oxidation stress when a dispersed GDYO suspension has a direct contact with bacteria especially under visible light irradiation.

Sequence isomerism-dependent self-assembly of glycopeptide mimetics with switchable antibiofilm properties

In biological systems, diverse amino acid sequences and functional decorations endow proteins with specific functions. Functionally modified oligopeptides are attractive building blocks to assemble stimuli-responsive biomimetic superstructures for mimicking soft structures in nature and biomaterial applications. In this work, we selectively synthesized the structurally simplest isomeric tripeptides (i.e., Ala-Gly-Gly-OH, Gly-Ala-Gly-OH and Gly-Gly-Ala-OH) to demonstrate how the subtlest change in sequence isomerism influences the self-assembly of glycopeptides. To impart self-assembly capability and stimuli-responsiveness, the isomeric tripeptides were modified with a hydrophobic n-butylazobenzene tail at the N-terminal. We observed three different self-assembled 1-D morphologies (i.e., nanotwists, nanoribbons and nanofibers) from the azobenzene-glycopeptides (AGPs) under the same conditions when the position of the Ala residue was switched. Experimental methods including transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and circular dichroism (CD) spectroscopy were used to characterize the structural details of glycopeptide mimetic assemblies. Martini coarse-grained molecular dynamics (MD) simulations confirmed such structural observations and investigated the differences in assembly mechanisms. Furthermore, the glycopeptide mimetic assemblies showed a reversible disassembly-assembly process in response to temperature, light or host-guest chemistry, and can be used as switchable antibiofilm nanoagents.

Coordination-Assisted Self-Assembled Polypeptide Nanogels to Selectively Combat Bacterial Infection

In the present scenario, the invention of bacteria-selective antimicrobial agent comprising negligible toxicity and hemolytic effect is a great challenge. To surmount this challenge, here, a series of polypeptide nanogels (PNGs) have been fabricated by a coordination-assisted self-assembly of a mannose-conjugated antimicrobial polypeptide, poly(arginine-r-valine)-mannose (poly(Arg-r-Val)-M₂), with Zn²⁺ ions. The fabricated PNGs are spherical in shape with a unique structural appearance similar to that of Taxus baccata fruits. PNGs, with a unique structural arrangement and threshold surface charge density, selectively interact with the bacterial membrane and exhibit potent antimicrobial activity, as reflected in their lower minimum inhibitory concentration values (varies from 2 to 16 μg/mL). PNGs show a remarkably high binding constant, 6.02 × 105 M^-1 (from isothermal titration calorimetry, ITC), with the bacterial membrane which manifests its potent bactericidal effect. PNGs are nontoxic against mammalian and red blood cells as reflected from their higher cell viability and insignificant hemolytic effect. PNGs are taken up by the bacterial membrane and selectively undergo structural deformation (scrutinized by ITC) followed by an exposure of free poly(Arg-r-Val)-M₂ molecules. The free poly(Arg-r-Val)-M₂ molecules are enforced to lyse the bacterial membrane (visualized by cryo-transmission electron microscopy) followed by the diffusion of the cytoplasmic component out of the membrane which culminates in the final death of the bacterium.

One-Step Synthesis of Epoxy Group-Terminated Organosilica Nanodots: A Versatile Nanoplatform for Imaging and Eliminating Multidrug-Resistant Bacteria and Their Biofilms

Multidrug-resistant bacteria (MRB) and their biofilms, both of which develop high levels of drug tolerance, cause severe threats to global health. This study demonstrates that biocompatible fluorescent silicon-containing nanodots can be a multifunctional platform for simultaneously imaging and eliminating MRB and their biofilms. Ultrasmall epoxy group (oxirane)-functionalized organosilica nanodots (OSiNDs) with a high photoluminescence quantum yield of ≈31% are synthesized via a simple one-step hydrothermal treatment of an epoxy group-containing silane molecule, 3-glycidoxypropyltrimethoxysilane, and an organic dye, rose bengal. The resultant OSiNDs can be employed as a universal imaging reagent for visualizing various bacteria/biofilms, including MRB and their biofilms. Moreover, the epoxy group-terminated OSiNDs can be conjugated with amine-containing reagents only via the simple stirring of the mixtures at an elevated temperature (e.g., 60 °C) for several hours (e.g., 3 h) without the addition of activating reagents. The amine-containing antibiotic vancomycin (Van) can thus be easily conjugated with the OSiNDs, and the obtained OSiNDs-Van can successfully inhibit the growth of MRB and even eliminate their biofilms. Collectively, the present work may give new impetus to the development of novel antibacterial and anti-biofilm agents for overcoming the drug resistance of bacteria.

O-Mannosylation Affords a Glycopeptide Hydrogel with Inherent Antibacterial Activities against E. coli via Multivalent Interactions between Lectins and Supramolecular Assemblies

Multivalent carbohydrate-lectin interactions play a crucial role in bacterial infection. Biomimicry of multivalent glycosystems represents a major strategy in the repression of bacterial growth. In this study, a new kind of glycopeptide (Naphthyl-Phe-Phe-Ser-Tyr, NMY) scaffold with mannose modification is designed and synthesized, which is able to perform supramolecular self-assembly with the assistance of catalytic enzyme, and present multiple mannose ligands on its self-assembled structure to target mannose-binding proteins. Relying on multivalent carbohydrate-lectin interactions, the glycopeptide hydrogel is able to bind Escherichia coli (E. coli) in high specificity, and result in bacterial adhesion, membrane disruption and subsequent cell death. In vivo wound healing assays reveal that this glycopeptide hydrogel exhibits considerable potentials for promoting wound healing and preventing E. coli infection in a full-thickness skin defect mouse model. Therefore, through a specific mannose-lectin interaction, a biocompatible hydrogel with inherent antibacterial activity against E. coli is achieved without the need to resort to antibiotic or antimicrobial agent treatment, highlighting the potential role of sugar-coated nanomaterials in wound healing and control of bacterial pathogenesis.

Chinese White Wax Solid Lipid Nanoparticles as a Novel Nanocarrier of Curcumin for Inhibiting the Formation of Staphylococcus aureus Biofilms

Chinese white wax solid lipid nanoparticles (cwSLNs) were prepared by high shear homogenization and ultrasound methods. Using an optimized formula, spherical cwSLNs with an average particle size of 401.9 ± 21.3 nm were obtained. The cwSLNs showed high entrapment efficiency, approximately 84.6%, for loading curcumin. The curcumin loaded cwSLNs (Cur-cwSLNs) exhibited sustained drug release properties. Notably, Cur-cwSLNs had a higher drug release rate at pH 4.5 than at pH 7.4, which suggested their applicability in an acidic environment. Cur-cwSLNs were able to inhibit the growth of Staphylococcus aureus and were more effective at reducing the biofilms produced by this bacterium compared to free curcumin. This study confirmed that cwSLNs may be novel carriers for increasing the bioavailability of curcumin with the potential to inhibit the formation of S. aureus biofilms.

Structure-function relationships of nonviral gene vectors: Lessons from antimicrobial polymers

In recent years, substantial advances have been achieved in the design and synthesis of nonviral gene vectors. However, lack of effective and biocompatible vectors still remains a major challenge that hinders their application in clinical settings. In the past decade, there has been a rapid expansion of cationic antimicrobial polymers, due to their potent, rapid, and broad-spectrum biocidal activity against resistant microbes, and biocompatible features. Given that antimicrobial polymers share common features with nonviral gene vectors in various aspects, such as membrane affinity, functional groups, physicochemical characteristics, and unique macromolecular architectures, these polymers may provide us with inspirations to overcome challenges in the design of novel vectors toward more safe and efficient gene delivery in clinic. Building off these observations, we provide here an overview of the structure-function relationships of polymers for both antimicrobial applications and gene delivery by elaborating some key structural parameters, including functional groups, charge density, hydrophobic/hydrophilic balance, MW, and macromolecular architectures. By borrowing a leaf from antimicrobial agents, great advancement in the development of newer nonviral gene vectors with high transfection efficiency and biocompatibility will be more promising. STATEMENT OF SIGNIFICANCE: The development of gene delivery is still in the preclinical stage for the lack of effective and biocompatible vectors. Given that antimicrobial polymers share common features with gene vectors in various aspects, such as membrane affinity, functional groups, physicochemical characteristics, and unique macromolecular architectures, these polymers may provide us with inspirations to overcome challenges in the design of novel vectors toward more safe and efficient gene delivery in clinic. In this review, we systematically summarized the structure-function relationships of antimicrobial polymers and gene vectors, with which the design of more advanced nonviral gene vectors is anticipated to be further boosted in the future.

Quaternary Ammonium Salt-Based Cross-Linked Micelles to Combat Biofilm

Due to self-produced extracellular polymeric substances (EPS), biofilms are hard to eradicate by common antimicrobials. Herein, a new quaternary ammonium salt based cross-linked micelle (QAS@CM) was created to combat biofilms. The QAS@CM adsorbed first onto the biofilm surface through multicharged interaction, then penetrated the EPS in the form of nanoparticles and diffused throughout the films. By responding to the biofilm acid/lipase microenvironment, these nanoparticles would further break into quaternary ammonium oligomers and act as the polyvalent inhibitors to effectively destroy the established biofilm and kill the corresponding bacteria within it.

Silver nanoparticles with pH induced surface charge switchable properties for antibacterial and antibiofilm applications

Silver nanoparticles with pH induced surface charge transform activities were prepared which showed an enhanced antibacterial and antibiofilm efficiency while demonstrated reduced cytotoxicity to mammalian cells.